third_party/llvm-7.0/llvm/lib/Target/PowerPC/PPCScheduleP9.td - SwiftShader - Git at Google

 //===-- PPCScheduleP9.td - PPC P9 Scheduling Definitions ---*- tablegen -*-===//
 //
 //                     The LLVM Compiler Infrastructure
 //
 // This file is distributed under the University of Illinois Open Source
 // License. See LICENSE.TXT for details.
 //
 //===----------------------------------------------------------------------===//
 //
 // This file defines the itinerary class data for the POWER9 processor.
 //
 //===----------------------------------------------------------------------===//
 include "PPCInstrInfo.td"

 def P9Model : SchedMachineModel {
   // The maximum number of instructions to be issued at the same time.
   // While a value of 8 is technically correct since 8 instructions can be
   // fetched from the instruction cache. However, only 6 instructions may be
   // actually dispatched at a time.
   let IssueWidth = 8;

   // Load latency is 4 or 5 cycles depending on the load. This latency assumes
   // that we have a cache hit. For a cache miss the load latency will be more.
   // There are two instructions (lxvl, lxvll) that have a latencty of 6 cycles.
   // However it is not worth bumping this value up to 6 when the vast majority
   // of instructions are 4 or 5 cycles.
   let LoadLatency = 5;

   // A total of 16 cycles to recover from a branch mispredict.
   let MispredictPenalty = 16;

   // Try to make sure we have at least 10 dispatch groups in a loop.
   // A dispatch group is 6 instructions.
   let LoopMicroOpBufferSize = 60;

   let CompleteModel = 1;

   // Do not support QPX (Quad Processing eXtension) or SPE (Signal Procesing
   // Engine) on Power 9.
   let UnsupportedFeatures = [HasQPX, HasSPE];

 }

 let SchedModel = P9Model in {

   // ***************** Processor Resources *****************

   //Dispatcher:
   def DISPATCHER : ProcResource<12>;

   // Issue Ports
   // An instruction can go down one of two issue queues.
   // Address Generation (AGEN) mainly for loads and stores.
   // Execution (EXEC) for most other instructions.
   // Some instructions cannot be run on just any issue queue and may require an
   // Even or an Odd queue. The EXECE represents the even queues and the EXECO
   // represents the odd queues.
   def IP_AGEN : ProcResource<4>;
   def IP_EXEC : ProcResource<4>;
   def IP_EXECE : ProcResource<2> {
     //Even Exec Ports
     let Super = IP_EXEC;
   }
   def IP_EXECO : ProcResource<2> {
     //Odd Exec Ports
     let Super = IP_EXEC;
   }

   // Pipeline Groups
   // Four ALU (Fixed Point Arithmetic) units in total. Two even, two Odd.
   def ALU : ProcResource<4>;
   def ALUE : ProcResource<2> {
     //Even ALU pipelines
     let Super = ALU;
   }
   def ALUO : ProcResource<2> {
     //Odd ALU pipelines
     let Super = ALU;
   }

   // Two DIV (Fixed Point Divide) units.
   def DIV : ProcResource<2>;

   // Four DP (Floating Point) units in total. Two even, two Odd.
   def DP : ProcResource<4>;
   def DPE : ProcResource<2> {
     //Even DP pipelines
     let Super = DP;
   }
   def DPO : ProcResource<2> {
     //Odd DP pipelines
     let Super = DP;
   }

   // Four LS (Load or Store) units.
   def LS : ProcResource<4>;

   // Two PM (Permute) units.
   def PM : ProcResource<2>;

   // Only one DFU (Decimal Floating Point and Quad Precision) unit.
   def DFU : ProcResource<1>;

   // Only one Branch unit.
   def BR : ProcResource<1> {
     let BufferSize = 16;
   }

   // Only one CY (Crypto) unit.
   def CY : ProcResource<1>;

   // ***************** SchedWriteRes Definitions *****************

   //Dispatcher
   def DISP_1C : SchedWriteRes<[DISPATCHER]> {
     let NumMicroOps = 0;
     let Latency = 1;
   }

   // Issue Ports
   def IP_AGEN_1C : SchedWriteRes<[IP_AGEN]> {
     let NumMicroOps = 0;
     let Latency = 1;
   }

   def IP_EXEC_1C : SchedWriteRes<[IP_EXEC]> {
     let NumMicroOps = 0;
     let Latency = 1;
   }

   def IP_EXECE_1C : SchedWriteRes<[IP_EXECE]> {
     let NumMicroOps = 0;
     let Latency = 1;
   }

   def IP_EXECO_1C : SchedWriteRes<[IP_EXECO]> {
     let NumMicroOps = 0;
     let Latency = 1;
   }

   //Pipeline Groups

   // ALU Units
   // An ALU may take either 2 or 3 cycles to complete the operation.
   // However, the ALU unit is only every busy for 1 cycle at a time and may
   // receive new instructions each cycle.
   def P9_ALU_2C : SchedWriteRes<[ALU]> {
     let Latency = 2;
   }

   def P9_ALUE_2C : SchedWriteRes<[ALUE]> {
     let Latency = 2;
   }

   def P9_ALUO_2C : SchedWriteRes<[ALUO]> {
     let Latency = 2;
   }

   def P9_ALU_3C : SchedWriteRes<[ALU]> {
     let Latency = 3;
   }

   def P9_ALUE_3C : SchedWriteRes<[ALUE]> {
     let Latency = 3;
   }

   def P9_ALUO_3C : SchedWriteRes<[ALUO]> {
     let Latency = 3;
   }

   // DIV Unit
   // A DIV unit may take from 5 to 40 cycles to complete.
   // Some DIV operations may keep the unit busy for up to 8 cycles.
   def P9_DIV_5C : SchedWriteRes<[DIV]> {
     let Latency = 5;
   }

   def P9_DIV_12C : SchedWriteRes<[DIV]> {
     let Latency = 12;
   }

   def P9_DIV_16C_8 : SchedWriteRes<[DIV]> {
     let ResourceCycles = [8];
     let Latency = 16;
   }

   def P9_DIV_24C_8 : SchedWriteRes<[DIV]> {
     let ResourceCycles = [8];
     let Latency = 24;
   }

   def P9_DIV_40C_8 : SchedWriteRes<[DIV]> {
     let ResourceCycles = [8];
     let Latency = 40;
   }

   // DP Unit
   // A DP unit may take from 2 to 36 cycles to complete.
   // Some DP operations keep the unit busy for up to 10 cycles.
   def P9_DP_2C : SchedWriteRes<[DP]> {
     let Latency = 2;
   }

   def P9_DP_5C : SchedWriteRes<[DP]> {
     let Latency = 5;
   }

   def P9_DP_7C : SchedWriteRes<[DP]> {
     let Latency = 7;
   }

   def P9_DPE_7C : SchedWriteRes<[DPE]> {
     let Latency = 7;
   }

   def P9_DPO_7C : SchedWriteRes<[DPO]> {
     let Latency = 7;
   }

   def P9_DP_22C_5 : SchedWriteRes<[DP]> {
     let ResourceCycles = [5];
     let Latency = 22;
   }

   def P9_DP_24C_8 : SchedWriteRes<[DP]> {
     let ResourceCycles = [8];
     let Latency = 24;
   }

   def P9_DPO_24C_8 : SchedWriteRes<[DPO]> {
     let ResourceCycles = [8];
     let Latency = 24;
   }

   def P9_DPE_24C_8 : SchedWriteRes<[DPE]> {
     let ResourceCycles = [8];
     let Latency = 24;
   }

   def P9_DP_26C_5 : SchedWriteRes<[DP]> {
     let ResourceCycles = [5];
     let Latency = 22;
   }

   def P9_DP_27C_7 : SchedWriteRes<[DP]> {
     let ResourceCycles = [7];
     let Latency = 27;
   }

   def P9_DPE_27C_10 : SchedWriteRes<[DP]> {
     let ResourceCycles = [10];
     let Latency = 27;
   }

   def P9_DPO_27C_10 : SchedWriteRes<[DP]> {
     let ResourceCycles = [10];
     let Latency = 27;
   }

   def P9_DP_33C_8 : SchedWriteRes<[DP]> {
     let ResourceCycles = [8];
     let Latency = 33;
   }

   def P9_DPE_33C_8 : SchedWriteRes<[DPE]> {
     let ResourceCycles = [8];
     let Latency = 33;
   }

   def P9_DPO_33C_8 : SchedWriteRes<[DPO]> {
     let ResourceCycles = [8];
     let Latency = 33;
   }

   def P9_DP_36C_10 : SchedWriteRes<[DP]> {
     let ResourceCycles = [10];
     let Latency = 36;
   }

   def P9_DPE_36C_10 : SchedWriteRes<[DP]> {
     let ResourceCycles = [10];
     let Latency = 36;
   }

   def P9_DPO_36C_10 : SchedWriteRes<[DP]> {
     let ResourceCycles = [10];
     let Latency = 36;
   }

   // PM Unit
   // Three cycle permute operations.
   def P9_PM_3C : SchedWriteRes<[PM]> {
     let Latency = 3;
   }

   // Load and Store Units
   // Loads can have 4, 5 or 6 cycles of latency.
   // Stores are listed as having a single cycle of latency. This is not
   // completely accurate since it takes more than 1 cycle to actually store
   // the value. However, since the store does not produce a result it can be
   // considered complete after one cycle.
   def P9_LS_1C : SchedWriteRes<[LS]> {
     let Latency = 1;
   }

   def P9_LS_4C : SchedWriteRes<[LS]> {
     let Latency = 4;
   }

   def P9_LS_5C : SchedWriteRes<[LS]> {
     let Latency = 5;
   }

   def P9_LS_6C : SchedWriteRes<[LS]> {
     let Latency = 6;
   }

   // DFU Unit
   // Some of the most expensive ops use the DFU.
   // Can take from 12 cycles to 76 cycles to obtain a result.
   // The unit may be busy for up to 62 cycles.
   def P9_DFU_12C : SchedWriteRes<[DFU]> {
     let Latency = 12;
   }

   def P9_DFU_23C : SchedWriteRes<[DFU]> {
     let Latency = 23;
     let ResourceCycles = [11];
   }

   def P9_DFU_24C : SchedWriteRes<[DFU]> {
     let Latency = 24;
     let ResourceCycles = [12];
   }

   def P9_DFU_37C : SchedWriteRes<[DFU]> {
     let Latency = 37;
     let ResourceCycles = [25];
   }

   def P9_DFU_58C : SchedWriteRes<[DFU]> {
     let Latency = 58;
     let ResourceCycles = [44];
   }

   def P9_DFU_76C : SchedWriteRes<[DFU]> {
     let Latency = 76;
     let ResourceCycles = [62];
   }

   // 2 or 5 cycle latencies for the branch unit.
   def P9_BR_2C : SchedWriteRes<[BR]> {
     let Latency = 2;
   }

   def P9_BR_5C : SchedWriteRes<[BR]> {
     let Latency = 5;
   }

   // 6 cycle latency for the crypto unit
   def P9_CY_6C : SchedWriteRes<[CY]> {
     let Latency = 6;
   }

   // ***************** WriteSeq Definitions *****************

   // These are combinations of the resources listed above.
   // The idea is that some cracked instructions cannot be done in parallel and
   // so the latencies for their resources must be added.
   def P9_LoadAndALUOp_6C : WriteSequence<[P9_LS_4C, P9_ALU_2C]>;
   def P9_LoadAndALUOp_7C : WriteSequence<[P9_LS_5C, P9_ALU_2C]>;
   def P9_LoadAndALU2Op_7C : WriteSequence<[P9_LS_4C, P9_ALU_3C]>;
   def P9_LoadAndALU2Op_8C : WriteSequence<[P9_LS_5C, P9_ALU_3C]>;
   def P9_LoadAndPMOp_8C : WriteSequence<[P9_LS_5C, P9_PM_3C]>;
   def P9_LoadAndLoadOp_8C : WriteSequence<[P9_LS_4C, P9_LS_4C]>;
   def P9_IntDivAndALUOp_18C_8 : WriteSequence<[P9_DIV_16C_8, P9_ALU_2C]>;
   def P9_IntDivAndALUOp_26C_8 : WriteSequence<[P9_DIV_24C_8, P9_ALU_2C]>;
   def P9_IntDivAndALUOp_42C_8 : WriteSequence<[P9_DIV_40C_8, P9_ALU_2C]>;
   def P9_StoreAndALUOp_3C : WriteSequence<[P9_LS_1C, P9_ALU_2C]>;
   def P9_StoreAndALUOp_4C : WriteSequence<[P9_LS_1C, P9_ALU_3C]>;
   def P9_ALUOpAndALUOp_4C : WriteSequence<[P9_ALU_2C, P9_ALU_2C]>;
   def P9_ALU2OpAndALU2Op_6C : WriteSequence<[P9_ALU_3C, P9_ALU_3C]>;
   def P9_ALUOpAndALUOpAndALUOp_6C :
     WriteSequence<[P9_ALU_2C, P9_ALU_2C, P9_ALU_2C]>;
   def P9_DPOpAndALUOp_7C : WriteSequence<[P9_DP_5C, P9_ALU_2C]>;
   def P9_DPOpAndALUOp_9C : WriteSequence<[P9_DP_7C, P9_ALU_2C]>;
   def P9_DPOpAndALU2Op_10C : WriteSequence<[P9_DP_7C, P9_ALU_3C]>;
   def P9_DPOpAndALUOp_24C_5 : WriteSequence<[P9_DP_22C_5, P9_ALU_2C]>;
   def P9_DPOpAndALUOp_35C_8 : WriteSequence<[P9_DP_33C_8, P9_ALU_2C]>;
   def P9_DPOpAndALU2Op_25C_5 : WriteSequence<[P9_DP_22C_5, P9_ALU_3C]>;
   def P9_DPOpAndALU2Op_29C_5 : WriteSequence<[P9_DP_26C_5, P9_ALU_3C]>;
   def P9_DPOpAndALU2Op_36C_8 : WriteSequence<[P9_DP_33C_8, P9_ALU_3C]>;
   def P9_DPOpAndALU2Op_39C_10 : WriteSequence<[P9_DP_36C_10, P9_ALU_3C]>;
   def P9_BROpAndALUOp_7C : WriteSequence<[P9_BR_5C, P9_ALU_2C]>;

   // Include the resource requirements of individual instructions.
   include "P9InstrResources.td"

 }
	//===-- PPCScheduleP9.td - PPC P9 Scheduling Definitions ---- tablegen --===//
	//
	// The LLVM Compiler Infrastructure
	//
	// This file is distributed under the University of Illinois Open Source
	// License. See LICENSE.TXT for details.
	//
	//===----------------------------------------------------------------------===//
	//
	// This file defines the itinerary class data for the POWER9 processor.
	//
	//===----------------------------------------------------------------------===//
	include "PPCInstrInfo.td"

	def P9Model : SchedMachineModel {
	// The maximum number of instructions to be issued at the same time.
	// While a value of 8 is technically correct since 8 instructions can be
	// fetched from the instruction cache. However, only 6 instructions may be
	// actually dispatched at a time.
	let IssueWidth = 8;

	// Load latency is 4 or 5 cycles depending on the load. This latency assumes
	// that we have a cache hit. For a cache miss the load latency will be more.
	// There are two instructions (lxvl, lxvll) that have a latencty of 6 cycles.
	// However it is not worth bumping this value up to 6 when the vast majority
	// of instructions are 4 or 5 cycles.
	let LoadLatency = 5;

	// A total of 16 cycles to recover from a branch mispredict.
	let MispredictPenalty = 16;

	// Try to make sure we have at least 10 dispatch groups in a loop.
	// A dispatch group is 6 instructions.
	let LoopMicroOpBufferSize = 60;

	let CompleteModel = 1;

	// Do not support QPX (Quad Processing eXtension) or SPE (Signal Procesing
	// Engine) on Power 9.
	let UnsupportedFeatures = [HasQPX, HasSPE];

	}

	let SchedModel = P9Model in {

	// *************** Processor Resources ***************

	//Dispatcher:
	def DISPATCHER : ProcResource<12>;

	// Issue Ports
	// An instruction can go down one of two issue queues.
	// Address Generation (AGEN) mainly for loads and stores.
	// Execution (EXEC) for most other instructions.
	// Some instructions cannot be run on just any issue queue and may require an
	// Even or an Odd queue. The EXECE represents the even queues and the EXECO
	// represents the odd queues.
	def IP_AGEN : ProcResource<4>;
	def IP_EXEC : ProcResource<4>;
	def IP_EXECE : ProcResource<2> {
	//Even Exec Ports
	let Super = IP_EXEC;
	}
	def IP_EXECO : ProcResource<2> {
	//Odd Exec Ports
	let Super = IP_EXEC;
	}

	// Pipeline Groups
	// Four ALU (Fixed Point Arithmetic) units in total. Two even, two Odd.
	def ALU : ProcResource<4>;
	def ALUE : ProcResource<2> {
	//Even ALU pipelines
	let Super = ALU;
	}
	def ALUO : ProcResource<2> {
	//Odd ALU pipelines
	let Super = ALU;
	}

	// Two DIV (Fixed Point Divide) units.
	def DIV : ProcResource<2>;

	// Four DP (Floating Point) units in total. Two even, two Odd.
	def DP : ProcResource<4>;
	def DPE : ProcResource<2> {
	//Even DP pipelines
	let Super = DP;
	}
	def DPO : ProcResource<2> {
	//Odd DP pipelines
	let Super = DP;
	}

	// Four LS (Load or Store) units.
	def LS : ProcResource<4>;

	// Two PM (Permute) units.
	def PM : ProcResource<2>;

	// Only one DFU (Decimal Floating Point and Quad Precision) unit.
	def DFU : ProcResource<1>;

	// Only one Branch unit.
	def BR : ProcResource<1> {
	let BufferSize = 16;
	}

	// Only one CY (Crypto) unit.
	def CY : ProcResource<1>;

	// *************** SchedWriteRes Definitions ***************

	//Dispatcher
	def DISP_1C : SchedWriteRes<[DISPATCHER]> {
	let NumMicroOps = 0;
	let Latency = 1;
	}

	// Issue Ports
	def IP_AGEN_1C : SchedWriteRes<[IP_AGEN]> {
	let NumMicroOps = 0;
	let Latency = 1;
	}

	def IP_EXEC_1C : SchedWriteRes<[IP_EXEC]> {
	let NumMicroOps = 0;
	let Latency = 1;
	}

	def IP_EXECE_1C : SchedWriteRes<[IP_EXECE]> {
	let NumMicroOps = 0;
	let Latency = 1;
	}

	def IP_EXECO_1C : SchedWriteRes<[IP_EXECO]> {
	let NumMicroOps = 0;
	let Latency = 1;
	}

	//Pipeline Groups

	// ALU Units
	// An ALU may take either 2 or 3 cycles to complete the operation.
	// However, the ALU unit is only every busy for 1 cycle at a time and may
	// receive new instructions each cycle.
	def P9_ALU_2C : SchedWriteRes<[ALU]> {
	let Latency = 2;
	}

	def P9_ALUE_2C : SchedWriteRes<[ALUE]> {
	let Latency = 2;
	}

	def P9_ALUO_2C : SchedWriteRes<[ALUO]> {
	let Latency = 2;
	}

	def P9_ALU_3C : SchedWriteRes<[ALU]> {
	let Latency = 3;
	}

	def P9_ALUE_3C : SchedWriteRes<[ALUE]> {
	let Latency = 3;
	}

	def P9_ALUO_3C : SchedWriteRes<[ALUO]> {
	let Latency = 3;
	}

	// DIV Unit
	// A DIV unit may take from 5 to 40 cycles to complete.
	// Some DIV operations may keep the unit busy for up to 8 cycles.
	def P9_DIV_5C : SchedWriteRes<[DIV]> {
	let Latency = 5;
	}

	def P9_DIV_12C : SchedWriteRes<[DIV]> {
	let Latency = 12;
	}

	def P9_DIV_16C_8 : SchedWriteRes<[DIV]> {
	let ResourceCycles = [8];
	let Latency = 16;
	}

	def P9_DIV_24C_8 : SchedWriteRes<[DIV]> {
	let ResourceCycles = [8];
	let Latency = 24;
	}

	def P9_DIV_40C_8 : SchedWriteRes<[DIV]> {
	let ResourceCycles = [8];
	let Latency = 40;
	}

	// DP Unit
	// A DP unit may take from 2 to 36 cycles to complete.
	// Some DP operations keep the unit busy for up to 10 cycles.
	def P9_DP_2C : SchedWriteRes<[DP]> {
	let Latency = 2;
	}

	def P9_DP_5C : SchedWriteRes<[DP]> {
	let Latency = 5;
	}

	def P9_DP_7C : SchedWriteRes<[DP]> {
	let Latency = 7;
	}

	def P9_DPE_7C : SchedWriteRes<[DPE]> {
	let Latency = 7;
	}

	def P9_DPO_7C : SchedWriteRes<[DPO]> {
	let Latency = 7;
	}

	def P9_DP_22C_5 : SchedWriteRes<[DP]> {
	let ResourceCycles = [5];
	let Latency = 22;
	}

	def P9_DP_24C_8 : SchedWriteRes<[DP]> {
	let ResourceCycles = [8];
	let Latency = 24;
	}

	def P9_DPO_24C_8 : SchedWriteRes<[DPO]> {
	let ResourceCycles = [8];
	let Latency = 24;
	}

	def P9_DPE_24C_8 : SchedWriteRes<[DPE]> {
	let ResourceCycles = [8];
	let Latency = 24;
	}

	def P9_DP_26C_5 : SchedWriteRes<[DP]> {
	let ResourceCycles = [5];
	let Latency = 22;
	}

	def P9_DP_27C_7 : SchedWriteRes<[DP]> {
	let ResourceCycles = [7];
	let Latency = 27;
	}

	def P9_DPE_27C_10 : SchedWriteRes<[DP]> {
	let ResourceCycles = [10];
	let Latency = 27;
	}

	def P9_DPO_27C_10 : SchedWriteRes<[DP]> {
	let ResourceCycles = [10];
	let Latency = 27;
	}

	def P9_DP_33C_8 : SchedWriteRes<[DP]> {
	let ResourceCycles = [8];
	let Latency = 33;
	}

	def P9_DPE_33C_8 : SchedWriteRes<[DPE]> {
	let ResourceCycles = [8];
	let Latency = 33;
	}

	def P9_DPO_33C_8 : SchedWriteRes<[DPO]> {
	let ResourceCycles = [8];
	let Latency = 33;
	}

	def P9_DP_36C_10 : SchedWriteRes<[DP]> {
	let ResourceCycles = [10];
	let Latency = 36;
	}

	def P9_DPE_36C_10 : SchedWriteRes<[DP]> {
	let ResourceCycles = [10];
	let Latency = 36;
	}

	def P9_DPO_36C_10 : SchedWriteRes<[DP]> {
	let ResourceCycles = [10];
	let Latency = 36;
	}

	// PM Unit
	// Three cycle permute operations.
	def P9_PM_3C : SchedWriteRes<[PM]> {
	let Latency = 3;
	}

	// Load and Store Units
	// Loads can have 4, 5 or 6 cycles of latency.
	// Stores are listed as having a single cycle of latency. This is not
	// completely accurate since it takes more than 1 cycle to actually store
	// the value. However, since the store does not produce a result it can be
	// considered complete after one cycle.
	def P9_LS_1C : SchedWriteRes<[LS]> {
	let Latency = 1;
	}

	def P9_LS_4C : SchedWriteRes<[LS]> {
	let Latency = 4;
	}

	def P9_LS_5C : SchedWriteRes<[LS]> {
	let Latency = 5;
	}

	def P9_LS_6C : SchedWriteRes<[LS]> {
	let Latency = 6;
	}

	// DFU Unit
	// Some of the most expensive ops use the DFU.
	// Can take from 12 cycles to 76 cycles to obtain a result.
	// The unit may be busy for up to 62 cycles.
	def P9_DFU_12C : SchedWriteRes<[DFU]> {
	let Latency = 12;
	}

	def P9_DFU_23C : SchedWriteRes<[DFU]> {
	let Latency = 23;
	let ResourceCycles = [11];
	}

	def P9_DFU_24C : SchedWriteRes<[DFU]> {
	let Latency = 24;
	let ResourceCycles = [12];
	}

	def P9_DFU_37C : SchedWriteRes<[DFU]> {
	let Latency = 37;
	let ResourceCycles = [25];
	}

	def P9_DFU_58C : SchedWriteRes<[DFU]> {
	let Latency = 58;
	let ResourceCycles = [44];
	}

	def P9_DFU_76C : SchedWriteRes<[DFU]> {
	let Latency = 76;
	let ResourceCycles = [62];
	}

	// 2 or 5 cycle latencies for the branch unit.
	def P9_BR_2C : SchedWriteRes<[BR]> {
	let Latency = 2;
	}

	def P9_BR_5C : SchedWriteRes<[BR]> {
	let Latency = 5;
	}

	// 6 cycle latency for the crypto unit
	def P9_CY_6C : SchedWriteRes<[CY]> {
	let Latency = 6;
	}

	// *************** WriteSeq Definitions ***************

	// These are combinations of the resources listed above.
	// The idea is that some cracked instructions cannot be done in parallel and
	// so the latencies for their resources must be added.
	def P9_LoadAndALUOp_6C : WriteSequence<[P9_LS_4C, P9_ALU_2C]>;
	def P9_LoadAndALUOp_7C : WriteSequence<[P9_LS_5C, P9_ALU_2C]>;
	def P9_LoadAndALU2Op_7C : WriteSequence<[P9_LS_4C, P9_ALU_3C]>;
	def P9_LoadAndALU2Op_8C : WriteSequence<[P9_LS_5C, P9_ALU_3C]>;
	def P9_LoadAndPMOp_8C : WriteSequence<[P9_LS_5C, P9_PM_3C]>;
	def P9_LoadAndLoadOp_8C : WriteSequence<[P9_LS_4C, P9_LS_4C]>;
	def P9_IntDivAndALUOp_18C_8 : WriteSequence<[P9_DIV_16C_8, P9_ALU_2C]>;
	def P9_IntDivAndALUOp_26C_8 : WriteSequence<[P9_DIV_24C_8, P9_ALU_2C]>;
	def P9_IntDivAndALUOp_42C_8 : WriteSequence<[P9_DIV_40C_8, P9_ALU_2C]>;
	def P9_StoreAndALUOp_3C : WriteSequence<[P9_LS_1C, P9_ALU_2C]>;
	def P9_StoreAndALUOp_4C : WriteSequence<[P9_LS_1C, P9_ALU_3C]>;
	def P9_ALUOpAndALUOp_4C : WriteSequence<[P9_ALU_2C, P9_ALU_2C]>;
	def P9_ALU2OpAndALU2Op_6C : WriteSequence<[P9_ALU_3C, P9_ALU_3C]>;
	def P9_ALUOpAndALUOpAndALUOp_6C :
	WriteSequence<[P9_ALU_2C, P9_ALU_2C, P9_ALU_2C]>;
	def P9_DPOpAndALUOp_7C : WriteSequence<[P9_DP_5C, P9_ALU_2C]>;
	def P9_DPOpAndALUOp_9C : WriteSequence<[P9_DP_7C, P9_ALU_2C]>;
	def P9_DPOpAndALU2Op_10C : WriteSequence<[P9_DP_7C, P9_ALU_3C]>;
	def P9_DPOpAndALUOp_24C_5 : WriteSequence<[P9_DP_22C_5, P9_ALU_2C]>;
	def P9_DPOpAndALUOp_35C_8 : WriteSequence<[P9_DP_33C_8, P9_ALU_2C]>;
	def P9_DPOpAndALU2Op_25C_5 : WriteSequence<[P9_DP_22C_5, P9_ALU_3C]>;
	def P9_DPOpAndALU2Op_29C_5 : WriteSequence<[P9_DP_26C_5, P9_ALU_3C]>;
	def P9_DPOpAndALU2Op_36C_8 : WriteSequence<[P9_DP_33C_8, P9_ALU_3C]>;
	def P9_DPOpAndALU2Op_39C_10 : WriteSequence<[P9_DP_36C_10, P9_ALU_3C]>;
	def P9_BROpAndALUOp_7C : WriteSequence<[P9_BR_5C, P9_ALU_2C]>;

	// Include the resource requirements of individual instructions.
	include "P9InstrResources.td"

	}