| // Copyright 2018 The SwiftShader Authors. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "VkPipeline.hpp" |
| |
| #include "VkDestroy.hpp" |
| #include "VkDevice.hpp" |
| #include "VkPipelineCache.hpp" |
| #include "VkPipelineLayout.hpp" |
| #include "VkRenderPass.hpp" |
| #include "VkShaderModule.hpp" |
| #include "VkStringify.hpp" |
| #include "Pipeline/ComputeProgram.hpp" |
| #include "Pipeline/SpirvShader.hpp" |
| |
| #include "marl/trace.h" |
| |
| #include "spirv-tools/optimizer.hpp" |
| |
| #include <iostream> |
| |
| namespace { |
| |
| // optimizeSpirv() applies and freezes specializations into constants, and runs spirv-opt. |
| sw::SpirvBinary optimizeSpirv(const vk::PipelineCache::SpirvBinaryKey &key) |
| { |
| const sw::SpirvBinary &code = key.getBinary(); |
| const VkSpecializationInfo *specializationInfo = key.getSpecializationInfo(); |
| bool optimize = key.getOptimization(); |
| |
| spvtools::Optimizer opt{ vk::SPIRV_VERSION }; |
| |
| opt.SetMessageConsumer([](spv_message_level_t level, const char *source, const spv_position_t &position, const char *message) { |
| switch(level) |
| { |
| case SPV_MSG_FATAL: sw::warn("SPIR-V FATAL: %d:%d %s\n", int(position.line), int(position.column), message); |
| case SPV_MSG_INTERNAL_ERROR: sw::warn("SPIR-V INTERNAL_ERROR: %d:%d %s\n", int(position.line), int(position.column), message); |
| case SPV_MSG_ERROR: sw::warn("SPIR-V ERROR: %d:%d %s\n", int(position.line), int(position.column), message); |
| case SPV_MSG_WARNING: sw::warn("SPIR-V WARNING: %d:%d %s\n", int(position.line), int(position.column), message); |
| case SPV_MSG_INFO: sw::trace("SPIR-V INFO: %d:%d %s\n", int(position.line), int(position.column), message); |
| case SPV_MSG_DEBUG: sw::trace("SPIR-V DEBUG: %d:%d %s\n", int(position.line), int(position.column), message); |
| default: sw::trace("SPIR-V MESSAGE: %d:%d %s\n", int(position.line), int(position.column), message); |
| } |
| }); |
| |
| // If the pipeline uses specialization, apply the specializations before freezing |
| if(specializationInfo) |
| { |
| std::unordered_map<uint32_t, std::vector<uint32_t>> specializations; |
| const uint8_t *specializationData = static_cast<const uint8_t *>(specializationInfo->pData); |
| |
| for(uint32_t i = 0; i < specializationInfo->mapEntryCount; i++) |
| { |
| const VkSpecializationMapEntry &entry = specializationInfo->pMapEntries[i]; |
| const uint8_t *value_ptr = specializationData + entry.offset; |
| std::vector<uint32_t> value(reinterpret_cast<const uint32_t *>(value_ptr), |
| reinterpret_cast<const uint32_t *>(value_ptr + entry.size)); |
| specializations.emplace(entry.constantID, std::move(value)); |
| } |
| |
| opt.RegisterPass(spvtools::CreateSetSpecConstantDefaultValuePass(specializations)); |
| } |
| |
| if(optimize) |
| { |
| // Full optimization list taken from spirv-opt. |
| opt.RegisterPerformancePasses(); |
| } |
| |
| spvtools::OptimizerOptions optimizerOptions = {}; |
| #if defined(NDEBUG) |
| optimizerOptions.set_run_validator(false); |
| #else |
| optimizerOptions.set_run_validator(true); |
| spvtools::ValidatorOptions validatorOptions = {}; |
| validatorOptions.SetScalarBlockLayout(true); // VK_EXT_scalar_block_layout |
| validatorOptions.SetUniformBufferStandardLayout(true); // VK_KHR_uniform_buffer_standard_layout |
| optimizerOptions.set_validator_options(validatorOptions); |
| #endif |
| |
| sw::SpirvBinary optimized; |
| opt.Run(code.data(), code.size(), &optimized, optimizerOptions); |
| ASSERT(optimized.size() > 0); |
| |
| if(false) |
| { |
| spvtools::SpirvTools core(vk::SPIRV_VERSION); |
| std::string preOpt; |
| core.Disassemble(code, &preOpt, SPV_BINARY_TO_TEXT_OPTION_NONE); |
| std::string postOpt; |
| core.Disassemble(optimized, &postOpt, SPV_BINARY_TO_TEXT_OPTION_NONE); |
| std::cout << "PRE-OPT: " << preOpt << std::endl |
| << "POST-OPT: " << postOpt << std::endl; |
| } |
| |
| return optimized; |
| } |
| |
| std::shared_ptr<sw::ComputeProgram> createProgram(vk::Device *device, std::shared_ptr<sw::SpirvShader> shader, const vk::PipelineLayout *layout) |
| { |
| MARL_SCOPED_EVENT("createProgram"); |
| |
| vk::DescriptorSet::Bindings descriptorSets; // TODO(b/129523279): Delay code generation until dispatch time. |
| // TODO(b/119409619): use allocator. |
| auto program = std::make_shared<sw::ComputeProgram>(device, shader, layout, descriptorSets); |
| program->generate(); |
| program->finalize("ComputeProgram"); |
| |
| return program; |
| } |
| |
| class PipelineCreationFeedback |
| { |
| public: |
| PipelineCreationFeedback(const VkGraphicsPipelineCreateInfo *pCreateInfo) |
| : pipelineCreationFeedback(GetPipelineCreationFeedback(pCreateInfo->pNext)) |
| { |
| pipelineCreationBegins(); |
| } |
| |
| PipelineCreationFeedback(const VkComputePipelineCreateInfo *pCreateInfo) |
| : pipelineCreationFeedback(GetPipelineCreationFeedback(pCreateInfo->pNext)) |
| { |
| pipelineCreationBegins(); |
| } |
| |
| ~PipelineCreationFeedback() |
| { |
| pipelineCreationEnds(); |
| } |
| |
| void stageCreationBegins(uint32_t stage) |
| { |
| if(pipelineCreationFeedback) |
| { |
| // Record stage creation begin time |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[stage].duration = now(); |
| } |
| } |
| |
| void cacheHit(uint32_t stage) |
| { |
| if(pipelineCreationFeedback) |
| { |
| pipelineCreationFeedback->pPipelineCreationFeedback->flags |= |
| VK_PIPELINE_CREATION_FEEDBACK_APPLICATION_PIPELINE_CACHE_HIT_BIT_EXT; |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[stage].flags |= |
| VK_PIPELINE_CREATION_FEEDBACK_APPLICATION_PIPELINE_CACHE_HIT_BIT_EXT; |
| } |
| } |
| |
| void stageCreationEnds(uint32_t stage) |
| { |
| if(pipelineCreationFeedback) |
| { |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[stage].flags |= |
| VK_PIPELINE_CREATION_FEEDBACK_VALID_BIT_EXT; |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[stage].duration = |
| now() - pipelineCreationFeedback->pPipelineStageCreationFeedbacks[stage].duration; |
| } |
| } |
| |
| void pipelineCreationError() |
| { |
| clear(); |
| pipelineCreationFeedback = nullptr; |
| } |
| |
| private: |
| static const VkPipelineCreationFeedbackCreateInfoEXT *GetPipelineCreationFeedback(const void *pNext) |
| { |
| const VkBaseInStructure *extensionCreateInfo = reinterpret_cast<const VkBaseInStructure *>(pNext); |
| while(extensionCreateInfo) |
| { |
| if(extensionCreateInfo->sType == VK_STRUCTURE_TYPE_PIPELINE_CREATION_FEEDBACK_CREATE_INFO_EXT) |
| { |
| return reinterpret_cast<const VkPipelineCreationFeedbackCreateInfoEXT *>(extensionCreateInfo); |
| } |
| |
| extensionCreateInfo = extensionCreateInfo->pNext; |
| } |
| |
| return nullptr; |
| } |
| |
| void pipelineCreationBegins() |
| { |
| if(pipelineCreationFeedback) |
| { |
| clear(); |
| |
| // Record pipeline creation begin time |
| pipelineCreationFeedback->pPipelineCreationFeedback->duration = now(); |
| } |
| } |
| |
| void pipelineCreationEnds() |
| { |
| if(pipelineCreationFeedback) |
| { |
| pipelineCreationFeedback->pPipelineCreationFeedback->flags |= |
| VK_PIPELINE_CREATION_FEEDBACK_VALID_BIT_EXT; |
| pipelineCreationFeedback->pPipelineCreationFeedback->duration = |
| now() - pipelineCreationFeedback->pPipelineCreationFeedback->duration; |
| } |
| } |
| |
| void clear() |
| { |
| if(pipelineCreationFeedback) |
| { |
| // Clear all flags and durations |
| pipelineCreationFeedback->pPipelineCreationFeedback->flags = 0; |
| pipelineCreationFeedback->pPipelineCreationFeedback->duration = 0; |
| for(uint32_t i = 0; i < pipelineCreationFeedback->pipelineStageCreationFeedbackCount; i++) |
| { |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[i].flags = 0; |
| pipelineCreationFeedback->pPipelineStageCreationFeedbacks[i].duration = 0; |
| } |
| } |
| } |
| |
| uint64_t now() |
| { |
| return std::chrono::time_point_cast<std::chrono::nanoseconds>(std::chrono::system_clock::now()).time_since_epoch().count(); |
| } |
| |
| const VkPipelineCreationFeedbackCreateInfoEXT *pipelineCreationFeedback = nullptr; |
| }; |
| |
| } // anonymous namespace |
| |
| namespace vk { |
| |
| Pipeline::Pipeline(PipelineLayout *layout, Device *device) |
| : layout(layout) |
| , device(device) |
| , robustBufferAccess(device->getEnabledFeatures().robustBufferAccess) |
| { |
| layout->incRefCount(); |
| } |
| |
| void Pipeline::destroy(const VkAllocationCallbacks *pAllocator) |
| { |
| destroyPipeline(pAllocator); |
| |
| vk::release(static_cast<VkPipelineLayout>(*layout), pAllocator); |
| } |
| |
| GraphicsPipeline::GraphicsPipeline(const VkGraphicsPipelineCreateInfo *pCreateInfo, void *mem, Device *device) |
| : Pipeline(vk::Cast(pCreateInfo->layout), device) |
| , state(device, pCreateInfo, layout, robustBufferAccess) |
| , inputs(pCreateInfo->pVertexInputState) |
| { |
| } |
| |
| void GraphicsPipeline::destroyPipeline(const VkAllocationCallbacks *pAllocator) |
| { |
| vertexShader.reset(); |
| fragmentShader.reset(); |
| } |
| |
| size_t GraphicsPipeline::ComputeRequiredAllocationSize(const VkGraphicsPipelineCreateInfo *pCreateInfo) |
| { |
| return 0; |
| } |
| |
| void GraphicsPipeline::getIndexBuffers(uint32_t count, uint32_t first, bool indexed, std::vector<std::pair<uint32_t, void *>> *indexBuffers) const |
| { |
| indexBuffer.getIndexBuffers(state.getTopology(), count, first, indexed, state.hasPrimitiveRestartEnable(), indexBuffers); |
| } |
| |
| bool GraphicsPipeline::containsImageWrite() const |
| { |
| return (vertexShader.get() && vertexShader->containsImageWrite()) || |
| (fragmentShader.get() && fragmentShader->containsImageWrite()); |
| } |
| |
| void GraphicsPipeline::setShader(const VkShaderStageFlagBits &stage, const std::shared_ptr<sw::SpirvShader> spirvShader) |
| { |
| switch(stage) |
| { |
| case VK_SHADER_STAGE_VERTEX_BIT: |
| ASSERT(vertexShader.get() == nullptr); |
| vertexShader = spirvShader; |
| break; |
| |
| case VK_SHADER_STAGE_FRAGMENT_BIT: |
| ASSERT(fragmentShader.get() == nullptr); |
| fragmentShader = spirvShader; |
| break; |
| |
| default: |
| UNSUPPORTED("Unsupported stage"); |
| break; |
| } |
| } |
| |
| const std::shared_ptr<sw::SpirvShader> GraphicsPipeline::getShader(const VkShaderStageFlagBits &stage) const |
| { |
| switch(stage) |
| { |
| case VK_SHADER_STAGE_VERTEX_BIT: |
| return vertexShader; |
| case VK_SHADER_STAGE_FRAGMENT_BIT: |
| return fragmentShader; |
| default: |
| UNSUPPORTED("Unsupported stage"); |
| return fragmentShader; |
| } |
| } |
| |
| VkResult GraphicsPipeline::compileShaders(const VkAllocationCallbacks *pAllocator, const VkGraphicsPipelineCreateInfo *pCreateInfo, PipelineCache *pPipelineCache) |
| { |
| PipelineCreationFeedback pipelineCreationFeedback(pCreateInfo); |
| |
| for(uint32_t stageIndex = 0; stageIndex < pCreateInfo->stageCount; stageIndex++) |
| { |
| const VkPipelineShaderStageCreateInfo &stageInfo = pCreateInfo->pStages[stageIndex]; |
| |
| pipelineCreationFeedback.stageCreationBegins(stageIndex); |
| |
| if(stageInfo.flags != 0) |
| { |
| // Vulkan 1.2: "flags must be 0" |
| UNSUPPORTED("pStage->flags %d", int(stageInfo.flags)); |
| } |
| |
| auto dbgctx = device->getDebuggerContext(); |
| // Do not optimize the shader if we have a debugger context. |
| // Optimization passes are likely to damage debug information, and reorder |
| // instructions. |
| const bool optimize = !dbgctx; |
| |
| const ShaderModule *module = vk::Cast(stageInfo.module); |
| const PipelineCache::SpirvBinaryKey key(module->getBinary(), stageInfo.pSpecializationInfo, optimize); |
| |
| if((pCreateInfo->flags & VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT_EXT) && |
| (!pPipelineCache || !pPipelineCache->contains(key))) |
| { |
| pipelineCreationFeedback.pipelineCreationError(); |
| return VK_PIPELINE_COMPILE_REQUIRED_EXT; |
| } |
| |
| sw::SpirvBinary spirv; |
| |
| if(pPipelineCache) |
| { |
| auto onCacheMiss = [&] { return optimizeSpirv(key); }; |
| auto onCacheHit = [&] { pipelineCreationFeedback.cacheHit(stageIndex); }; |
| spirv = pPipelineCache->getOrOptimizeSpirv(key, onCacheMiss, onCacheHit); |
| } |
| else |
| { |
| spirv = optimizeSpirv(key); |
| |
| // If the pipeline does not have specialization constants, there's a 1-to-1 mapping between the unoptimized and optimized SPIR-V, |
| // so we should use a 1-to-1 mapping of the identifiers to avoid JIT routine recompiles. |
| if(!key.getSpecializationInfo()) |
| { |
| spirv.mapOptimizedIdentifier(key.getBinary()); |
| } |
| } |
| |
| // TODO(b/201798871): use allocator. |
| auto shader = std::make_shared<sw::SpirvShader>(stageInfo.stage, stageInfo.pName, spirv, |
| vk::Cast(pCreateInfo->renderPass), pCreateInfo->subpass, robustBufferAccess, dbgctx); |
| |
| setShader(stageInfo.stage, shader); |
| |
| pipelineCreationFeedback.stageCreationEnds(stageIndex); |
| } |
| |
| return VK_SUCCESS; |
| } |
| |
| ComputePipeline::ComputePipeline(const VkComputePipelineCreateInfo *pCreateInfo, void *mem, Device *device) |
| : Pipeline(vk::Cast(pCreateInfo->layout), device) |
| { |
| } |
| |
| void ComputePipeline::destroyPipeline(const VkAllocationCallbacks *pAllocator) |
| { |
| shader.reset(); |
| program.reset(); |
| } |
| |
| size_t ComputePipeline::ComputeRequiredAllocationSize(const VkComputePipelineCreateInfo *pCreateInfo) |
| { |
| return 0; |
| } |
| |
| VkResult ComputePipeline::compileShaders(const VkAllocationCallbacks *pAllocator, const VkComputePipelineCreateInfo *pCreateInfo, PipelineCache *pPipelineCache) |
| { |
| PipelineCreationFeedback pipelineCreationFeedback(pCreateInfo); |
| pipelineCreationFeedback.stageCreationBegins(0); |
| |
| auto &stage = pCreateInfo->stage; |
| const ShaderModule *module = vk::Cast(stage.module); |
| |
| ASSERT(shader.get() == nullptr); |
| ASSERT(program.get() == nullptr); |
| |
| auto dbgctx = device->getDebuggerContext(); |
| // Do not optimize the shader if we have a debugger context. |
| // Optimization passes are likely to damage debug information, and reorder |
| // instructions. |
| const bool optimize = !dbgctx; |
| |
| const PipelineCache::SpirvBinaryKey shaderKey(module->getBinary(), stage.pSpecializationInfo, optimize); |
| |
| if((pCreateInfo->flags & VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT_EXT) && |
| (!pPipelineCache || !pPipelineCache->contains(shaderKey))) |
| { |
| pipelineCreationFeedback.pipelineCreationError(); |
| return VK_PIPELINE_COMPILE_REQUIRED_EXT; |
| } |
| |
| sw::SpirvBinary spirv; |
| |
| if(pPipelineCache) |
| { |
| auto onCacheMiss = [&] { return optimizeSpirv(shaderKey); }; |
| auto onCacheHit = [&] { pipelineCreationFeedback.cacheHit(0); }; |
| spirv = pPipelineCache->getOrOptimizeSpirv(shaderKey, onCacheMiss, onCacheHit); |
| } |
| else |
| { |
| spirv = optimizeSpirv(shaderKey); |
| |
| // If the pipeline does not have specialization constants, there's a 1-to-1 mapping between the unoptimized and optimized SPIR-V, |
| // so we should use a 1-to-1 mapping of the identifiers to avoid JIT routine recompiles. |
| if(!shaderKey.getSpecializationInfo()) |
| { |
| spirv.mapOptimizedIdentifier(shaderKey.getBinary()); |
| } |
| } |
| |
| // TODO(b/201798871): use allocator. |
| shader = std::make_shared<sw::SpirvShader>(stage.stage, stage.pName, spirv, |
| nullptr, 0, robustBufferAccess, dbgctx); |
| |
| const PipelineCache::ComputeProgramKey programKey(shader->getIdentifier(), layout->identifier); |
| |
| if(pPipelineCache) |
| { |
| program = pPipelineCache->getOrCreateComputeProgram(programKey, [&] { |
| return createProgram(device, shader, layout); |
| }); |
| } |
| else |
| { |
| program = createProgram(device, shader, layout); |
| } |
| |
| pipelineCreationFeedback.stageCreationEnds(0); |
| |
| return VK_SUCCESS; |
| } |
| |
| void ComputePipeline::run(uint32_t baseGroupX, uint32_t baseGroupY, uint32_t baseGroupZ, |
| uint32_t groupCountX, uint32_t groupCountY, uint32_t groupCountZ, |
| vk::DescriptorSet::Array const &descriptorSetObjects, |
| vk::DescriptorSet::Bindings const &descriptorSets, |
| vk::DescriptorSet::DynamicOffsets const &descriptorDynamicOffsets, |
| vk::Pipeline::PushConstantStorage const &pushConstants) |
| { |
| ASSERT_OR_RETURN(program != nullptr); |
| program->run( |
| descriptorSetObjects, descriptorSets, descriptorDynamicOffsets, pushConstants, |
| baseGroupX, baseGroupY, baseGroupZ, |
| groupCountX, groupCountY, groupCountZ); |
| } |
| |
| } // namespace vk |