blob: a100f059217d98f2a63e37589c66d2e8a8075ab4 [file] [log] [blame] [edit]
// Copyright 2016 The SwiftShader Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "Clipper.hpp"
#include "Polygon.hpp"
#include "Renderer.hpp"
#include "Common/Debug.hpp"
namespace sw
{
Clipper::Clipper(bool symmetricNormalizedDepth)
{
n = symmetricNormalizedDepth ? -1.0f : 0.0f;
}
Clipper::~Clipper()
{
}
unsigned int Clipper::computeClipFlags(const float4 &v)
{
return ((v.x > v.w) ? CLIP_RIGHT : 0) |
((v.y > v.w) ? CLIP_TOP : 0) |
((v.z > v.w) ? CLIP_FAR : 0) |
((v.x < -v.w) ? CLIP_LEFT : 0) |
((v.y < -v.w) ? CLIP_BOTTOM : 0) |
((v.z < n * v.w) ? CLIP_NEAR : 0) |
Clipper::CLIP_FINITE; // FIXME: xyz finite
}
bool Clipper::clip(Polygon &polygon, int clipFlagsOr, const DrawCall &draw)
{
if(clipFlagsOr & CLIP_FRUSTUM)
{
if(clipFlagsOr & CLIP_NEAR) clipNear(polygon);
if(polygon.n >= 3) {
if(clipFlagsOr & CLIP_FAR) clipFar(polygon);
if(polygon.n >= 3) {
if(clipFlagsOr & CLIP_LEFT) clipLeft(polygon);
if(polygon.n >= 3) {
if(clipFlagsOr & CLIP_RIGHT) clipRight(polygon);
if(polygon.n >= 3) {
if(clipFlagsOr & CLIP_TOP) clipTop(polygon);
if(polygon.n >= 3) {
if(clipFlagsOr & CLIP_BOTTOM) clipBottom(polygon);
}}}}}
}
if(clipFlagsOr & CLIP_USER)
{
int clipFlags = draw.clipFlags;
DrawData &data = *draw.data;
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE0) clipPlane(polygon, data.clipPlane[0]);
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE1) clipPlane(polygon, data.clipPlane[1]);
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE2) clipPlane(polygon, data.clipPlane[2]);
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE3) clipPlane(polygon, data.clipPlane[3]);
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE4) clipPlane(polygon, data.clipPlane[4]);
if(polygon.n >= 3) {
if(clipFlags & CLIP_PLANE5) clipPlane(polygon, data.clipPlane[5]);
}}}}}}
}
return polygon.n >= 3;
}
void Clipper::clipNear(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->z - n * V[i]->w;
float dj = V[j]->z - n * V[j]->w;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipFar(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->w - V[i]->z;
float dj = V[j]->w - V[j]->z;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipLeft(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->w + V[i]->x;
float dj = V[j]->w + V[j]->x;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipRight(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->w - V[i]->x;
float dj = V[j]->w - V[j]->x;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipTop(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->w - V[i]->y;
float dj = V[j]->w - V[j]->y;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipBottom(Polygon &polygon)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = V[i]->w + V[i]->y;
float dj = V[j]->w + V[j]->y;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
void Clipper::clipPlane(Polygon &polygon, const Plane &p)
{
const float4 **V = polygon.P[polygon.i];
const float4 **T = polygon.P[polygon.i + 1];
int t = 0;
for(int i = 0; i < polygon.n; i++)
{
int j = i == polygon.n - 1 ? 0 : i + 1;
float di = p.A * V[i]->x + p.B * V[i]->y + p.C * V[i]->z + p.D * V[i]->w;
float dj = p.A * V[j]->x + p.B * V[j]->y + p.C * V[j]->z + p.D * V[j]->w;
if(di >= 0)
{
T[t++] = V[i];
if(dj < 0)
{
clipEdge(polygon.B[polygon.b], *V[i], *V[j], di, dj);
T[t++] = &polygon.B[polygon.b++];
}
}
else
{
if(dj > 0)
{
clipEdge(polygon.B[polygon.b], *V[j], *V[i], dj, di);
T[t++] = &polygon.B[polygon.b++];
}
}
}
polygon.n = t;
polygon.i += 1;
}
inline void Clipper::clipEdge(float4 &Vo, const float4 &Vi, const float4 &Vj, float di, float dj) const
{
float D = 1.0f / (dj - di);
Vo.x = (dj * Vi.x - di * Vj.x) * D;
Vo.y = (dj * Vi.y - di * Vj.y) * D;
Vo.z = (dj * Vi.z - di * Vj.z) * D;
Vo.w = (dj * Vi.w - di * Vj.w) * D;
}
}