| //===- MipsInstrInfo.td - Target Description for Mips Target -*- tablegen -*-=// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file contains the Mips implementation of the TargetInstrInfo class. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Mips profiles and nodes |
| //===----------------------------------------------------------------------===// |
| |
| def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>; |
| def SDT_MipsCMov : SDTypeProfile<1, 4, [SDTCisSameAs<0, 1>, |
| SDTCisSameAs<1, 2>, |
| SDTCisSameAs<3, 4>, |
| SDTCisInt<4>]>; |
| def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>, SDTCisVT<1, i32>]>; |
| def SDT_MipsCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i32>, SDTCisVT<1, i32>]>; |
| def SDT_MFLOHI : SDTypeProfile<1, 1, [SDTCisInt<0>, SDTCisVT<1, untyped>]>; |
| def SDT_MTLOHI : SDTypeProfile<1, 2, [SDTCisVT<0, untyped>, |
| SDTCisInt<1>, SDTCisSameAs<1, 2>]>; |
| def SDT_MipsMultDiv : SDTypeProfile<1, 2, [SDTCisVT<0, untyped>, SDTCisInt<1>, |
| SDTCisSameAs<1, 2>]>; |
| def SDT_MipsMAddMSub : SDTypeProfile<1, 3, |
| [SDTCisVT<0, untyped>, SDTCisSameAs<0, 3>, |
| SDTCisVT<1, i32>, SDTCisSameAs<1, 2>]>; |
| def SDT_MipsDivRem16 : SDTypeProfile<0, 2, [SDTCisInt<0>, SDTCisSameAs<0, 1>]>; |
| |
| def SDT_MipsThreadPointer : SDTypeProfile<1, 0, [SDTCisPtrTy<0>]>; |
| |
| def SDT_Sync : SDTypeProfile<0, 1, [SDTCisVT<0, i32>]>; |
| |
| def SDT_Ext : SDTypeProfile<1, 3, [SDTCisInt<0>, SDTCisSameAs<0, 1>, |
| SDTCisVT<2, i32>, SDTCisSameAs<2, 3>]>; |
| def SDT_Ins : SDTypeProfile<1, 4, [SDTCisInt<0>, SDTCisSameAs<0, 1>, |
| SDTCisVT<2, i32>, SDTCisSameAs<2, 3>, |
| SDTCisSameAs<0, 4>]>; |
| |
| def SDTMipsLoadLR : SDTypeProfile<1, 2, |
| [SDTCisInt<0>, SDTCisPtrTy<1>, |
| SDTCisSameAs<0, 2>]>; |
| |
| // Call |
| def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink, |
| [SDNPHasChain, SDNPOutGlue, SDNPOptInGlue, |
| SDNPVariadic]>; |
| |
| // Tail call |
| def MipsTailCall : SDNode<"MipsISD::TailCall", SDT_MipsJmpLink, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| |
| // Hi and Lo nodes are used to handle global addresses. Used on |
| // MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol |
| // static model. (nothing to do with Mips Registers Hi and Lo) |
| |
| // Hi is the odd node out, on MIPS64 it can expand to either daddiu when |
| // using static relocations with 64 bit symbols, or lui when using 32 bit |
| // symbols. |
| def MipsHigher : SDNode<"MipsISD::Higher", SDTIntUnaryOp>; |
| def MipsHighest : SDNode<"MipsISD::Highest", SDTIntUnaryOp>; |
| def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp>; |
| def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>; |
| |
| def MipsGPRel : SDNode<"MipsISD::GPRel", SDTIntUnaryOp>; |
| |
| // Hi node for accessing the GOT. |
| def MipsGotHi : SDNode<"MipsISD::GotHi", SDTIntUnaryOp>; |
| |
| // Hi node for handling TLS offsets |
| def MipsTlsHi : SDNode<"MipsISD::TlsHi", SDTIntUnaryOp>; |
| |
| // Thread pointer |
| def MipsThreadPointer: SDNode<"MipsISD::ThreadPointer", SDT_MipsThreadPointer>; |
| |
| // Return |
| def MipsRet : SDNode<"MipsISD::Ret", SDTNone, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| |
| def MipsERet : SDNode<"MipsISD::ERet", SDTNone, |
| [SDNPHasChain, SDNPOptInGlue, SDNPSideEffect]>; |
| |
| // These are target-independent nodes, but have target-specific formats. |
| def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart, |
| [SDNPHasChain, SDNPSideEffect, SDNPOutGlue]>; |
| def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd, |
| [SDNPHasChain, SDNPSideEffect, |
| SDNPOptInGlue, SDNPOutGlue]>; |
| |
| // Nodes used to extract LO/HI registers. |
| def MipsMFHI : SDNode<"MipsISD::MFHI", SDT_MFLOHI>; |
| def MipsMFLO : SDNode<"MipsISD::MFLO", SDT_MFLOHI>; |
| |
| // Node used to insert 32-bit integers to LOHI register pair. |
| def MipsMTLOHI : SDNode<"MipsISD::MTLOHI", SDT_MTLOHI>; |
| |
| // Mult nodes. |
| def MipsMult : SDNode<"MipsISD::Mult", SDT_MipsMultDiv>; |
| def MipsMultu : SDNode<"MipsISD::Multu", SDT_MipsMultDiv>; |
| |
| // MAdd*/MSub* nodes |
| def MipsMAdd : SDNode<"MipsISD::MAdd", SDT_MipsMAddMSub>; |
| def MipsMAddu : SDNode<"MipsISD::MAddu", SDT_MipsMAddMSub>; |
| def MipsMSub : SDNode<"MipsISD::MSub", SDT_MipsMAddMSub>; |
| def MipsMSubu : SDNode<"MipsISD::MSubu", SDT_MipsMAddMSub>; |
| |
| // DivRem(u) nodes |
| def MipsDivRem : SDNode<"MipsISD::DivRem", SDT_MipsMultDiv>; |
| def MipsDivRemU : SDNode<"MipsISD::DivRemU", SDT_MipsMultDiv>; |
| def MipsDivRem16 : SDNode<"MipsISD::DivRem16", SDT_MipsDivRem16, |
| [SDNPOutGlue]>; |
| def MipsDivRemU16 : SDNode<"MipsISD::DivRemU16", SDT_MipsDivRem16, |
| [SDNPOutGlue]>; |
| |
| // Target constant nodes that are not part of any isel patterns and remain |
| // unchanged can cause instructions with illegal operands to be emitted. |
| // Wrapper node patterns give the instruction selector a chance to replace |
| // target constant nodes that would otherwise remain unchanged with ADDiu |
| // nodes. Without these wrapper node patterns, the following conditional move |
| // instruction is emitted when function cmov2 in test/CodeGen/Mips/cmov.ll is |
| // compiled: |
| // movn %got(d)($gp), %got(c)($gp), $4 |
| // This instruction is illegal since movn can take only register operands. |
| |
| def MipsWrapper : SDNode<"MipsISD::Wrapper", SDTIntBinOp>; |
| |
| def MipsSync : SDNode<"MipsISD::Sync", SDT_Sync, [SDNPHasChain,SDNPSideEffect]>; |
| |
| def MipsExt : SDNode<"MipsISD::Ext", SDT_Ext>; |
| def MipsIns : SDNode<"MipsISD::Ins", SDT_Ins>; |
| def MipsCIns : SDNode<"MipsISD::CIns", SDT_Ext>; |
| |
| def MipsLWL : SDNode<"MipsISD::LWL", SDTMipsLoadLR, |
| [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>; |
| def MipsLWR : SDNode<"MipsISD::LWR", SDTMipsLoadLR, |
| [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>; |
| def MipsSWL : SDNode<"MipsISD::SWL", SDTStore, |
| [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>; |
| def MipsSWR : SDNode<"MipsISD::SWR", SDTStore, |
| [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>; |
| def MipsLDL : SDNode<"MipsISD::LDL", SDTMipsLoadLR, |
| [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>; |
| def MipsLDR : SDNode<"MipsISD::LDR", SDTMipsLoadLR, |
| [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>; |
| def MipsSDL : SDNode<"MipsISD::SDL", SDTStore, |
| [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>; |
| def MipsSDR : SDNode<"MipsISD::SDR", SDTStore, |
| [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Mips Instruction Predicate Definitions. |
| //===----------------------------------------------------------------------===// |
| def HasMips2 : Predicate<"Subtarget->hasMips2()">, |
| AssemblerPredicate<"FeatureMips2">; |
| def HasMips3_32 : Predicate<"Subtarget->hasMips3_32()">, |
| AssemblerPredicate<"FeatureMips3_32">; |
| def HasMips3_32r2 : Predicate<"Subtarget->hasMips3_32r2()">, |
| AssemblerPredicate<"FeatureMips3_32r2">; |
| def HasMips3 : Predicate<"Subtarget->hasMips3()">, |
| AssemblerPredicate<"FeatureMips3">; |
| def NotMips3 : Predicate<"!Subtarget->hasMips3()">, |
| AssemblerPredicate<"!FeatureMips3">; |
| def HasMips4_32 : Predicate<"Subtarget->hasMips4_32()">, |
| AssemblerPredicate<"FeatureMips4_32">; |
| def NotMips4_32 : Predicate<"!Subtarget->hasMips4_32()">, |
| AssemblerPredicate<"!FeatureMips4_32">; |
| def HasMips4_32r2 : Predicate<"Subtarget->hasMips4_32r2()">, |
| AssemblerPredicate<"FeatureMips4_32r2">; |
| def HasMips5_32r2 : Predicate<"Subtarget->hasMips5_32r2()">, |
| AssemblerPredicate<"FeatureMips5_32r2">; |
| def HasMips32 : Predicate<"Subtarget->hasMips32()">, |
| AssemblerPredicate<"FeatureMips32">; |
| def HasMips32r2 : Predicate<"Subtarget->hasMips32r2()">, |
| AssemblerPredicate<"FeatureMips32r2">; |
| def HasMips32r5 : Predicate<"Subtarget->hasMips32r5()">, |
| AssemblerPredicate<"FeatureMips32r5">; |
| def HasMips32r6 : Predicate<"Subtarget->hasMips32r6()">, |
| AssemblerPredicate<"FeatureMips32r6">; |
| def NotMips32r6 : Predicate<"!Subtarget->hasMips32r6()">, |
| AssemblerPredicate<"!FeatureMips32r6">; |
| def IsGP64bit : Predicate<"Subtarget->isGP64bit()">, |
| AssemblerPredicate<"FeatureGP64Bit">; |
| def IsGP32bit : Predicate<"!Subtarget->isGP64bit()">, |
| AssemblerPredicate<"!FeatureGP64Bit">; |
| def IsPTR64bit : Predicate<"Subtarget->isABI_N64()">, |
| AssemblerPredicate<"FeaturePTR64Bit">; |
| def IsPTR32bit : Predicate<"!Subtarget->isABI_N64()">, |
| AssemblerPredicate<"!FeaturePTR64Bit">; |
| def HasMips64 : Predicate<"Subtarget->hasMips64()">, |
| AssemblerPredicate<"FeatureMips64">; |
| def NotMips64 : Predicate<"!Subtarget->hasMips64()">, |
| AssemblerPredicate<"!FeatureMips64">; |
| def HasMips64r2 : Predicate<"Subtarget->hasMips64r2()">, |
| AssemblerPredicate<"FeatureMips64r2">; |
| def HasMips64r5 : Predicate<"Subtarget->hasMips64r5()">, |
| AssemblerPredicate<"FeatureMips64r5">; |
| def HasMips64r6 : Predicate<"Subtarget->hasMips64r6()">, |
| AssemblerPredicate<"FeatureMips64r6">; |
| def NotMips64r6 : Predicate<"!Subtarget->hasMips64r6()">, |
| AssemblerPredicate<"!FeatureMips64r6">; |
| def InMips16Mode : Predicate<"Subtarget->inMips16Mode()">, |
| AssemblerPredicate<"FeatureMips16">; |
| def NotInMips16Mode : Predicate<"!Subtarget->inMips16Mode()">, |
| AssemblerPredicate<"!FeatureMips16">; |
| def HasCnMips : Predicate<"Subtarget->hasCnMips()">, |
| AssemblerPredicate<"FeatureCnMips">; |
| def NotCnMips : Predicate<"!Subtarget->hasCnMips()">, |
| AssemblerPredicate<"!FeatureCnMips">; |
| def HasCnMipsP : Predicate<"Subtarget->hasCnMipsP()">, |
| AssemblerPredicate<"FeatureCnMipsP">; |
| def NotCnMipsP : Predicate<"!Subtarget->hasCnMipsP()">, |
| AssemblerPredicate<"!FeatureCnMipsP">; |
| def IsSym32 : Predicate<"Subtarget->hasSym32()">, |
| AssemblerPredicate<"FeatureSym32">; |
| def IsSym64 : Predicate<"!Subtarget->hasSym32()">, |
| AssemblerPredicate<"!FeatureSym32">; |
| def IsN64 : Predicate<"Subtarget->isABI_N64()">; |
| def IsNotN64 : Predicate<"!Subtarget->isABI_N64()">; |
| def RelocNotPIC : Predicate<"!TM.isPositionIndependent()">; |
| def RelocPIC : Predicate<"TM.isPositionIndependent()">; |
| def NoNaNsFPMath : Predicate<"TM.Options.NoNaNsFPMath">; |
| def UseAbs : Predicate<"Subtarget->inAbs2008Mode() ||" |
| "TM.Options.NoNaNsFPMath">; |
| def HasStdEnc : Predicate<"Subtarget->hasStandardEncoding()">, |
| AssemblerPredicate<"!FeatureMips16">; |
| def NotDSP : Predicate<"!Subtarget->hasDSP()">; |
| def InMicroMips : Predicate<"Subtarget->inMicroMipsMode()">, |
| AssemblerPredicate<"FeatureMicroMips">; |
| def NotInMicroMips : Predicate<"!Subtarget->inMicroMipsMode()">, |
| AssemblerPredicate<"!FeatureMicroMips">; |
| def IsLE : Predicate<"Subtarget->isLittle()">; |
| def IsBE : Predicate<"!Subtarget->isLittle()">; |
| def IsNotNaCl : Predicate<"!Subtarget->isTargetNaCl()">; |
| def UseTCCInDIV : AssemblerPredicate<"FeatureUseTCCInDIV">; |
| def HasEVA : Predicate<"Subtarget->hasEVA()">, |
| AssemblerPredicate<"FeatureEVA">; |
| def HasMSA : Predicate<"Subtarget->hasMSA()">, |
| AssemblerPredicate<"FeatureMSA">; |
| def HasMadd4 : Predicate<"!Subtarget->disableMadd4()">, |
| AssemblerPredicate<"!FeatureMadd4">; |
| def HasMT : Predicate<"Subtarget->hasMT()">, |
| AssemblerPredicate<"FeatureMT">; |
| def UseIndirectJumpsHazard : Predicate<"Subtarget->useIndirectJumpsHazard()">, |
| AssemblerPredicate<"FeatureUseIndirectJumpsHazard">; |
| def NoIndirectJumpGuards : Predicate<"!Subtarget->useIndirectJumpsHazard()">, |
| AssemblerPredicate<"!FeatureUseIndirectJumpsHazard">; |
| def HasCRC : Predicate<"Subtarget->hasCRC()">, |
| AssemblerPredicate<"FeatureCRC">; |
| def HasVirt : Predicate<"Subtarget->hasVirt()">, |
| AssemblerPredicate<"FeatureVirt">; |
| def HasGINV : Predicate<"Subtarget->hasGINV()">, |
| AssemblerPredicate<"FeatureGINV">; |
| // TODO: Add support for FPOpFusion::Standard |
| def AllowFPOpFusion : Predicate<"TM.Options.AllowFPOpFusion ==" |
| " FPOpFusion::Fast">; |
| //===----------------------------------------------------------------------===// |
| // Mips GPR size adjectives. |
| // They are mutually exclusive. |
| //===----------------------------------------------------------------------===// |
| |
| class GPR_32 { list<Predicate> GPRPredicates = [IsGP32bit]; } |
| class GPR_64 { list<Predicate> GPRPredicates = [IsGP64bit]; } |
| |
| class PTR_32 { list<Predicate> PTRPredicates = [IsPTR32bit]; } |
| class PTR_64 { list<Predicate> PTRPredicates = [IsPTR64bit]; } |
| |
| //===----------------------------------------------------------------------===// |
| // Mips Symbol size adjectives. |
| // They are mutally exculsive. |
| //===----------------------------------------------------------------------===// |
| |
| class SYM_32 { list<Predicate> SYMPredicates = [IsSym32]; } |
| class SYM_64 { list<Predicate> SYMPredicates = [IsSym64]; } |
| |
| //===----------------------------------------------------------------------===// |
| // Mips ISA/ASE membership and instruction group membership adjectives. |
| // They are mutually exclusive. |
| //===----------------------------------------------------------------------===// |
| |
| // FIXME: I'd prefer to use additive predicates to build the instruction sets |
| // but we are short on assembler feature bits at the moment. Using a |
| // subtractive predicate will hopefully keep us under the 32 predicate |
| // limit long enough to develop an alternative way to handle P1||P2 |
| // predicates. |
| class ISA_MIPS1 { |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS1_NOT_MIPS3 { |
| list<Predicate> InsnPredicates = [NotMips3]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS1_NOT_4_32 { |
| list<Predicate> InsnPredicates = [NotMips4_32]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS1_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS2 { |
| list<Predicate> InsnPredicates = [HasMips2]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS2_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips2, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS3 { |
| list<Predicate> InsnPredicates = [HasMips3]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS3_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips3, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32 { |
| list<Predicate> InsnPredicates = [HasMips32]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips32, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32R2 { |
| list<Predicate> InsnPredicates = [HasMips32r2]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32R2_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips32r2, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32R5 { |
| list<Predicate> InsnPredicates = [HasMips32r5]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS64 { |
| list<Predicate> InsnPredicates = [HasMips64]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS64_NOT_64R6 { |
| list<Predicate> InsnPredicates = [HasMips64, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS64R2 { |
| list<Predicate> InsnPredicates = [HasMips64r2]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS64R5 { |
| list<Predicate> InsnPredicates = [HasMips64r5]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS32R6 { |
| list<Predicate> InsnPredicates = [HasMips32r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MIPS64R6 { |
| list<Predicate> InsnPredicates = [HasMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| class ISA_MICROMIPS { |
| list<Predicate> EncodingPredicates = [InMicroMips]; |
| } |
| class ISA_MICROMIPS32R5 { |
| list<Predicate> InsnPredicates = [HasMips32r5]; |
| list<Predicate> EncodingPredicates = [InMicroMips]; |
| } |
| class ISA_MICROMIPS32R6 { |
| list<Predicate> InsnPredicates = [HasMips32r6]; |
| list<Predicate> EncodingPredicates = [InMicroMips]; |
| } |
| class ISA_MICROMIPS64R6 { |
| list<Predicate> InsnPredicates = [HasMips64r6]; |
| list<Predicate> EncodingPredicates = [InMicroMips]; |
| } |
| class ISA_MICROMIPS32_NOT_MIPS32R6 { |
| list<Predicate> InsnPredicates = [NotMips32r6]; |
| list<Predicate> EncodingPredicates = [InMicroMips]; |
| } |
| class ASE_EVA { list<Predicate> ASEPredicate = [HasEVA]; } |
| |
| // The portions of MIPS-III that were also added to MIPS32 |
| class INSN_MIPS3_32 { |
| list<Predicate> InsnPredicates = [HasMips3_32]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-III that were also added to MIPS32 but were removed in |
| // MIPS32r6 and MIPS64r6. |
| class INSN_MIPS3_32_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips3_32, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-III that were also added to MIPS32 |
| class INSN_MIPS3_32R2 { |
| list<Predicate> InsnPredicates = [HasMips3_32r2]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-IV that were also added to MIPS32. |
| class INSN_MIPS4_32 { |
| list <Predicate> InsnPredicates = [HasMips4_32]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-IV that were also added to MIPS32 but were removed in |
| // MIPS32r6 and MIPS64r6. |
| class INSN_MIPS4_32_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips4_32, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-IV that were also added to MIPS32r2 but were removed in |
| // MIPS32r6 and MIPS64r6. |
| class INSN_MIPS4_32R2_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips4_32r2, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-IV that were also added to MIPS32r2. |
| class INSN_MIPS4_32R2 { |
| list<Predicate> InsnPredicates = [HasMips4_32r2]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| // The portions of MIPS-V that were also added to MIPS32r2 but were removed in |
| // MIPS32r6 and MIPS64r6. |
| class INSN_MIPS5_32R2_NOT_32R6_64R6 { |
| list<Predicate> InsnPredicates = [HasMips5_32r2, NotMips32r6, NotMips64r6]; |
| list<Predicate> EncodingPredicates = [HasStdEnc]; |
| } |
| |
| class ASE_CNMIPS { |
| list<Predicate> ASEPredicate = [HasCnMips]; |
| } |
| |
| class NOT_ASE_CNMIPS { |
| list<Predicate> ASEPredicate = [NotCnMips]; |
| } |
| |
| class ASE_CNMIPSP { |
| list<Predicate> ASEPredicate = [HasCnMipsP]; |
| } |
| |
| class NOT_ASE_CNMIPSP { |
| list<Predicate> ASEPredicate = [NotCnMipsP]; |
| } |
| |
| class ASE_MIPS64_CNMIPS { |
| list<Predicate> ASEPredicate = [HasMips64, HasCnMips]; |
| } |
| |
| class ASE_MSA { |
| list<Predicate> ASEPredicate = [HasMSA]; |
| } |
| |
| class ASE_MSA_NOT_MSA64 { |
| list<Predicate> ASEPredicate = [HasMSA, NotMips64]; |
| } |
| |
| class ASE_MSA64 { |
| list<Predicate> ASEPredicate = [HasMSA, HasMips64]; |
| } |
| |
| class ASE_MT { |
| list <Predicate> ASEPredicate = [HasMT]; |
| } |
| |
| class ASE_CRC { |
| list <Predicate> ASEPredicate = [HasCRC]; |
| } |
| |
| class ASE_VIRT { |
| list <Predicate> ASEPredicate = [HasVirt]; |
| } |
| |
| class ASE_GINV { |
| list <Predicate> ASEPredicate = [HasGINV]; |
| } |
| |
| // Class used for separating microMIPSr6 and microMIPS (r3) instruction. |
| // It can be used only on instructions that doesn't inherit PredicateControl. |
| class ISA_MICROMIPS_NOT_32R6 : PredicateControl { |
| let InsnPredicates = [NotMips32r6]; |
| let EncodingPredicates = [InMicroMips]; |
| } |
| |
| class ASE_NOT_DSP { |
| list<Predicate> ASEPredicate = [NotDSP]; |
| } |
| |
| class MADD4 { |
| list<Predicate> AdditionalPredicates = [HasMadd4]; |
| } |
| |
| // Classses used for separating expansions that differ based on the ABI in |
| // use. |
| class ABI_N64 { |
| list<Predicate> AdditionalPredicates = [IsN64]; |
| } |
| |
| class ABI_NOT_N64 { |
| list<Predicate> AdditionalPredicates = [IsNotN64]; |
| } |
| |
| class FPOP_FUSION_FAST { |
| list <Predicate> AdditionalPredicates = [AllowFPOpFusion]; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| |
| class MipsPat<dag pattern, dag result> : Pat<pattern, result>, PredicateControl; |
| |
| class MipsInstAlias<string Asm, dag Result, bit Emit = 0b1> : |
| InstAlias<Asm, Result, Emit>, PredicateControl; |
| |
| class IsCommutable { |
| bit isCommutable = 1; |
| } |
| |
| class IsBranch { |
| bit isBranch = 1; |
| bit isCTI = 1; |
| } |
| |
| class IsReturn { |
| bit isReturn = 1; |
| bit isCTI = 1; |
| } |
| |
| class IsCall { |
| bit isCall = 1; |
| bit isCTI = 1; |
| } |
| |
| class IsTailCall { |
| bit isCall = 1; |
| bit isTerminator = 1; |
| bit isReturn = 1; |
| bit isBarrier = 1; |
| bit hasExtraSrcRegAllocReq = 1; |
| bit isCodeGenOnly = 1; |
| bit isCTI = 1; |
| } |
| |
| class IsAsCheapAsAMove { |
| bit isAsCheapAsAMove = 1; |
| } |
| |
| class NeverHasSideEffects { |
| bit hasSideEffects = 0; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Instruction format superclass |
| //===----------------------------------------------------------------------===// |
| |
| include "MipsInstrFormats.td" |
| |
| //===----------------------------------------------------------------------===// |
| // Mips Operand, Complex Patterns and Transformations Definitions. |
| //===----------------------------------------------------------------------===// |
| |
| class ConstantSImmAsmOperandClass<int Bits, list<AsmOperandClass> Supers = [], |
| int Offset = 0> : AsmOperandClass { |
| let Name = "ConstantSImm" # Bits # "_" # Offset; |
| let RenderMethod = "addConstantSImmOperands<" # Bits # ", " # Offset # ">"; |
| let PredicateMethod = "isConstantSImm<" # Bits # ", " # Offset # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "SImm" # Bits # "_" # Offset; |
| } |
| |
| class SimmLslAsmOperandClass<int Bits, list<AsmOperandClass> Supers = [], |
| int Shift = 0> : AsmOperandClass { |
| let Name = "Simm" # Bits # "_Lsl" # Shift; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<" # Bits # ", " # Shift # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "SImm" # Bits # "_Lsl" # Shift; |
| } |
| |
| class ConstantUImmAsmOperandClass<int Bits, list<AsmOperandClass> Supers = [], |
| int Offset = 0> : AsmOperandClass { |
| let Name = "ConstantUImm" # Bits # "_" # Offset; |
| let RenderMethod = "addConstantUImmOperands<" # Bits # ", " # Offset # ">"; |
| let PredicateMethod = "isConstantUImm<" # Bits # ", " # Offset # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "UImm" # Bits # "_" # Offset; |
| } |
| |
| class ConstantUImmRangeAsmOperandClass<int Bottom, int Top, |
| list<AsmOperandClass> Supers = []> |
| : AsmOperandClass { |
| let Name = "ConstantUImmRange" # Bottom # "_" # Top; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isConstantUImmRange<" # Bottom # ", " # Top # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "UImmRange" # Bottom # "_" # Top; |
| } |
| |
| class SImmAsmOperandClass<int Bits, list<AsmOperandClass> Supers = []> |
| : AsmOperandClass { |
| let Name = "SImm" # Bits; |
| let RenderMethod = "addSImmOperands<" # Bits # ">"; |
| let PredicateMethod = "isSImm<" # Bits # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "SImm" # Bits; |
| } |
| |
| class UImmAsmOperandClass<int Bits, list<AsmOperandClass> Supers = []> |
| : AsmOperandClass { |
| let Name = "UImm" # Bits; |
| let RenderMethod = "addUImmOperands<" # Bits # ">"; |
| let PredicateMethod = "isUImm<" # Bits # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "UImm" # Bits; |
| } |
| |
| // Generic case - only to support certain assembly pseudo instructions. |
| class UImmAnyAsmOperandClass<int Bits, list<AsmOperandClass> Supers = []> |
| : AsmOperandClass { |
| let Name = "ImmAny"; |
| let RenderMethod = "addConstantUImmOperands<32>"; |
| let PredicateMethod = "isSImm<" # Bits # ">"; |
| let SuperClasses = Supers; |
| let DiagnosticType = "ImmAny"; |
| } |
| |
| // AsmOperandClasses require a strict ordering which is difficult to manage |
| // as a hierarchy. Instead, we use a linear ordering and impose an order that |
| // is in some places arbitrary. |
| // |
| // Here the rules that are in use: |
| // * Wider immediates are a superset of narrower immediates: |
| // uimm4 < uimm5 < uimm6 |
| // * For the same bit-width, unsigned immediates are a superset of signed |
| // immediates:: |
| // simm4 < uimm4 < simm5 < uimm5 |
| // * For the same upper-bound, signed immediates are a superset of unsigned |
| // immediates: |
| // uimm3 < simm4 < uimm4 < simm4 |
| // * Modified immediates are a superset of ordinary immediates: |
| // uimm5 < uimm5_plus1 (1..32) < uimm5_plus32 (32..63) < uimm6 |
| // The term 'superset' starts to break down here since the uimm5_plus* classes |
| // are not true supersets of uimm5 (but they are still subsets of uimm6). |
| // * 'Relaxed' immediates are supersets of the corresponding unsigned immediate. |
| // uimm16 < uimm16_relaxed |
| // * The codeGen pattern type is arbitrarily ordered. |
| // uimm5 < uimm5_64, and uimm5 < vsplat_uimm5 |
| // This is entirely arbitrary. We need an ordering and what we pick is |
| // unimportant since only one is possible for a given mnemonic. |
| |
| def UImm32CoercedAsmOperandClass : UImmAnyAsmOperandClass<33, []> { |
| let Name = "UImm32_Coerced"; |
| let DiagnosticType = "UImm32_Coerced"; |
| } |
| def SImm32RelaxedAsmOperandClass |
| : SImmAsmOperandClass<32, [UImm32CoercedAsmOperandClass]> { |
| let Name = "SImm32_Relaxed"; |
| let PredicateMethod = "isAnyImm<33>"; |
| let DiagnosticType = "SImm32_Relaxed"; |
| } |
| def SImm32AsmOperandClass |
| : SImmAsmOperandClass<32, [SImm32RelaxedAsmOperandClass]>; |
| def ConstantUImm26AsmOperandClass |
| : ConstantUImmAsmOperandClass<26, [SImm32AsmOperandClass]>; |
| def ConstantUImm20AsmOperandClass |
| : ConstantUImmAsmOperandClass<20, [ConstantUImm26AsmOperandClass]>; |
| def ConstantSImm19Lsl2AsmOperandClass : AsmOperandClass { |
| let Name = "SImm19Lsl2"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<19, 2>"; |
| let SuperClasses = [ConstantUImm20AsmOperandClass]; |
| let DiagnosticType = "SImm19_Lsl2"; |
| } |
| def UImm16RelaxedAsmOperandClass |
| : UImmAsmOperandClass<16, [ConstantUImm20AsmOperandClass]> { |
| let Name = "UImm16_Relaxed"; |
| let PredicateMethod = "isAnyImm<16>"; |
| let DiagnosticType = "UImm16_Relaxed"; |
| } |
| // Similar to the relaxed classes which take an SImm and render it as |
| // an UImm, this takes a UImm and renders it as an SImm. |
| def UImm16AltRelaxedAsmOperandClass |
| : SImmAsmOperandClass<16, [UImm16RelaxedAsmOperandClass]> { |
| let Name = "UImm16_AltRelaxed"; |
| let PredicateMethod = "isUImm<16>"; |
| let DiagnosticType = "UImm16_AltRelaxed"; |
| } |
| // FIXME: One of these should probably have UImm16AsmOperandClass as the |
| // superclass instead of UImm16RelaxedasmOPerandClass. |
| def UImm16AsmOperandClass |
| : UImmAsmOperandClass<16, [UImm16RelaxedAsmOperandClass]>; |
| def SImm16RelaxedAsmOperandClass |
| : SImmAsmOperandClass<16, [UImm16RelaxedAsmOperandClass]> { |
| let Name = "SImm16_Relaxed"; |
| let PredicateMethod = "isAnyImm<16>"; |
| let DiagnosticType = "SImm16_Relaxed"; |
| } |
| def SImm16AsmOperandClass |
| : SImmAsmOperandClass<16, [SImm16RelaxedAsmOperandClass]>; |
| def ConstantSImm10Lsl3AsmOperandClass : AsmOperandClass { |
| let Name = "SImm10Lsl3"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<10, 3>"; |
| let SuperClasses = [SImm16AsmOperandClass]; |
| let DiagnosticType = "SImm10_Lsl3"; |
| } |
| def ConstantSImm10Lsl2AsmOperandClass : AsmOperandClass { |
| let Name = "SImm10Lsl2"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<10, 2>"; |
| let SuperClasses = [ConstantSImm10Lsl3AsmOperandClass]; |
| let DiagnosticType = "SImm10_Lsl2"; |
| } |
| def ConstantSImm11AsmOperandClass |
| : ConstantSImmAsmOperandClass<11, [ConstantSImm10Lsl2AsmOperandClass]>; |
| def ConstantSImm10Lsl1AsmOperandClass : AsmOperandClass { |
| let Name = "SImm10Lsl1"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<10, 1>"; |
| let SuperClasses = [ConstantSImm11AsmOperandClass]; |
| let DiagnosticType = "SImm10_Lsl1"; |
| } |
| def ConstantUImm10AsmOperandClass |
| : ConstantUImmAsmOperandClass<10, [ConstantSImm10Lsl1AsmOperandClass]>; |
| def ConstantSImm10AsmOperandClass |
| : ConstantSImmAsmOperandClass<10, [ConstantUImm10AsmOperandClass]>; |
| def ConstantSImm9AsmOperandClass |
| : ConstantSImmAsmOperandClass<9, [ConstantSImm10AsmOperandClass]>; |
| def ConstantSImm7Lsl2AsmOperandClass : AsmOperandClass { |
| let Name = "SImm7Lsl2"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledSImm<7, 2>"; |
| let SuperClasses = [ConstantSImm9AsmOperandClass]; |
| let DiagnosticType = "SImm7_Lsl2"; |
| } |
| def ConstantUImm8AsmOperandClass |
| : ConstantUImmAsmOperandClass<8, [ConstantSImm7Lsl2AsmOperandClass]>; |
| def ConstantUImm7Sub1AsmOperandClass |
| : ConstantUImmAsmOperandClass<7, [ConstantUImm8AsmOperandClass], -1> { |
| // Specify the names since the -1 offset causes invalid identifiers otherwise. |
| let Name = "UImm7_N1"; |
| let DiagnosticType = "UImm7_N1"; |
| } |
| def ConstantUImm7AsmOperandClass |
| : ConstantUImmAsmOperandClass<7, [ConstantUImm7Sub1AsmOperandClass]>; |
| def ConstantUImm6Lsl2AsmOperandClass : AsmOperandClass { |
| let Name = "UImm6Lsl2"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledUImm<6, 2>"; |
| let SuperClasses = [ConstantUImm7AsmOperandClass]; |
| let DiagnosticType = "UImm6_Lsl2"; |
| } |
| def ConstantUImm6AsmOperandClass |
| : ConstantUImmAsmOperandClass<6, [ConstantUImm6Lsl2AsmOperandClass]>; |
| def ConstantSImm6AsmOperandClass |
| : ConstantSImmAsmOperandClass<6, [ConstantUImm6AsmOperandClass]>; |
| def ConstantUImm5Lsl2AsmOperandClass : AsmOperandClass { |
| let Name = "UImm5Lsl2"; |
| let RenderMethod = "addImmOperands"; |
| let PredicateMethod = "isScaledUImm<5, 2>"; |
| let SuperClasses = [ConstantSImm6AsmOperandClass]; |
| let DiagnosticType = "UImm5_Lsl2"; |
| } |
| def ConstantUImm5_Range2_64AsmOperandClass |
| : ConstantUImmRangeAsmOperandClass<2, 64, [ConstantUImm5Lsl2AsmOperandClass]>; |
| def ConstantUImm5Plus33AsmOperandClass |
| : ConstantUImmAsmOperandClass<5, [ConstantUImm5_Range2_64AsmOperandClass], |
| 33>; |
| def ConstantUImm5ReportUImm6AsmOperandClass |
| : ConstantUImmAsmOperandClass<5, [ConstantUImm5Plus33AsmOperandClass]> { |
| let Name = "ConstantUImm5_0_Report_UImm6"; |
| let DiagnosticType = "UImm5_0_Report_UImm6"; |
| } |
| def ConstantUImm5Plus32AsmOperandClass |
| : ConstantUImmAsmOperandClass< |
| 5, [ConstantUImm5ReportUImm6AsmOperandClass], 32>; |
| def ConstantUImm5Plus32NormalizeAsmOperandClass |
| : ConstantUImmAsmOperandClass<5, [ConstantUImm5Plus32AsmOperandClass], 32> { |
| let Name = "ConstantUImm5_32_Norm"; |
| // We must also subtract 32 when we render the operand. |
| let RenderMethod = "addConstantUImmOperands<5, 32, -32>"; |
| } |
| def ConstantUImm5Plus1ReportUImm6AsmOperandClass |
| : ConstantUImmAsmOperandClass< |
| 5, [ConstantUImm5Plus32NormalizeAsmOperandClass], 1>{ |
| let Name = "ConstantUImm5_Plus1_Report_UImm6"; |
| } |
| def ConstantUImm5Plus1AsmOperandClass |
| : ConstantUImmAsmOperandClass< |
| 5, [ConstantUImm5Plus1ReportUImm6AsmOperandClass], 1>; |
| def ConstantUImm5AsmOperandClass |
| : ConstantUImmAsmOperandClass<5, [ConstantUImm5Plus1AsmOperandClass]>; |
| def ConstantSImm5AsmOperandClass |
| : ConstantSImmAsmOperandClass<5, [ConstantUImm5AsmOperandClass]>; |
| def ConstantUImm4AsmOperandClass |
| : ConstantUImmAsmOperandClass<4, [ConstantSImm5AsmOperandClass]>; |
| def ConstantSImm4AsmOperandClass |
| : ConstantSImmAsmOperandClass<4, [ConstantUImm4AsmOperandClass]>; |
| def ConstantUImm3AsmOperandClass |
| : ConstantUImmAsmOperandClass<3, [ConstantSImm4AsmOperandClass]>; |
| def ConstantUImm2Plus1AsmOperandClass |
| : ConstantUImmAsmOperandClass<2, [ConstantUImm3AsmOperandClass], 1>; |
| def ConstantUImm2AsmOperandClass |
| : ConstantUImmAsmOperandClass<2, [ConstantUImm3AsmOperandClass]>; |
| def ConstantUImm1AsmOperandClass |
| : ConstantUImmAsmOperandClass<1, [ConstantUImm2AsmOperandClass]>; |
| def ConstantImmzAsmOperandClass : AsmOperandClass { |
| let Name = "ConstantImmz"; |
| let RenderMethod = "addConstantUImmOperands<1>"; |
| let PredicateMethod = "isConstantImmz"; |
| let SuperClasses = [ConstantUImm1AsmOperandClass]; |
| let DiagnosticType = "Immz"; |
| } |
| |
| def Simm19Lsl2AsmOperand |
| : SimmLslAsmOperandClass<19, [], 2>; |
| |
| def MipsJumpTargetAsmOperand : AsmOperandClass { |
| let Name = "JumpTarget"; |
| let ParserMethod = "parseJumpTarget"; |
| let PredicateMethod = "isImm"; |
| let RenderMethod = "addImmOperands"; |
| } |
| |
| // Instruction operand types |
| def jmptarget : Operand<OtherVT> { |
| let EncoderMethod = "getJumpTargetOpValue"; |
| let ParserMatchClass = MipsJumpTargetAsmOperand; |
| } |
| def brtarget : Operand<OtherVT> { |
| let EncoderMethod = "getBranchTargetOpValue"; |
| let OperandType = "OPERAND_PCREL"; |
| let DecoderMethod = "DecodeBranchTarget"; |
| let ParserMatchClass = MipsJumpTargetAsmOperand; |
| } |
| def brtarget1SImm16 : Operand<OtherVT> { |
| let EncoderMethod = "getBranchTargetOpValue1SImm16"; |
| let OperandType = "OPERAND_PCREL"; |
| let DecoderMethod = "DecodeBranchTarget1SImm16"; |
| let ParserMatchClass = MipsJumpTargetAsmOperand; |
| } |
| def calltarget : Operand<iPTR> { |
| let EncoderMethod = "getJumpTargetOpValue"; |
| let ParserMatchClass = MipsJumpTargetAsmOperand; |
| } |
| |
| def imm64: Operand<i64>; |
| |
| def simm19_lsl2 : Operand<i32> { |
| let EncoderMethod = "getSimm19Lsl2Encoding"; |
| let DecoderMethod = "DecodeSimm19Lsl2"; |
| let ParserMatchClass = Simm19Lsl2AsmOperand; |
| } |
| |
| def simm18_lsl3 : Operand<i32> { |
| let EncoderMethod = "getSimm18Lsl3Encoding"; |
| let DecoderMethod = "DecodeSimm18Lsl3"; |
| let ParserMatchClass = MipsJumpTargetAsmOperand; |
| } |
| |
| // Zero |
| def uimmz : Operand<i32> { |
| let PrintMethod = "printUImm<0>"; |
| let ParserMatchClass = ConstantImmzAsmOperandClass; |
| } |
| |
| // size operand of ins instruction |
| def uimm_range_2_64 : Operand<i32> { |
| let PrintMethod = "printUImm<6, 2>"; |
| let EncoderMethod = "getSizeInsEncoding"; |
| let DecoderMethod = "DecodeInsSize"; |
| let ParserMatchClass = ConstantUImm5_Range2_64AsmOperandClass; |
| } |
| |
| // Unsigned Operands |
| foreach I = {1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 26} in |
| def uimm # I : Operand<i32> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantUImm" # I # "AsmOperandClass"); |
| } |
| |
| def uimm2_plus1 : Operand<i32> { |
| let PrintMethod = "printUImm<2, 1>"; |
| let EncoderMethod = "getUImmWithOffsetEncoding<2, 1>"; |
| let DecoderMethod = "DecodeUImmWithOffset<2, 1>"; |
| let ParserMatchClass = ConstantUImm2Plus1AsmOperandClass; |
| } |
| |
| def uimm5_plus1 : Operand<i32> { |
| let PrintMethod = "printUImm<5, 1>"; |
| let EncoderMethod = "getUImmWithOffsetEncoding<5, 1>"; |
| let DecoderMethod = "DecodeUImmWithOffset<5, 1>"; |
| let ParserMatchClass = ConstantUImm5Plus1AsmOperandClass; |
| } |
| |
| def uimm5_plus1_report_uimm6 : Operand<i32> { |
| let PrintMethod = "printUImm<6, 1>"; |
| let EncoderMethod = "getUImmWithOffsetEncoding<5, 1>"; |
| let DecoderMethod = "DecodeUImmWithOffset<5, 1>"; |
| let ParserMatchClass = ConstantUImm5Plus1ReportUImm6AsmOperandClass; |
| } |
| |
| def uimm5_plus32 : Operand<i32> { |
| let PrintMethod = "printUImm<5, 32>"; |
| let ParserMatchClass = ConstantUImm5Plus32AsmOperandClass; |
| } |
| |
| def uimm5_plus33 : Operand<i32> { |
| let PrintMethod = "printUImm<5, 33>"; |
| let EncoderMethod = "getUImmWithOffsetEncoding<5, 1>"; |
| let DecoderMethod = "DecodeUImmWithOffset<5, 1>"; |
| let ParserMatchClass = ConstantUImm5Plus33AsmOperandClass; |
| } |
| |
| def uimm5_inssize_plus1 : Operand<i32> { |
| let PrintMethod = "printUImm<6>"; |
| let ParserMatchClass = ConstantUImm5Plus1AsmOperandClass; |
| let EncoderMethod = "getSizeInsEncoding"; |
| let DecoderMethod = "DecodeInsSize"; |
| } |
| |
| def uimm5_plus32_normalize : Operand<i32> { |
| let PrintMethod = "printUImm<5>"; |
| let ParserMatchClass = ConstantUImm5Plus32NormalizeAsmOperandClass; |
| } |
| |
| def uimm5_lsl2 : Operand<OtherVT> { |
| let EncoderMethod = "getUImm5Lsl2Encoding"; |
| let DecoderMethod = "DecodeUImmWithOffsetAndScale<5, 0, 4>"; |
| let ParserMatchClass = ConstantUImm5Lsl2AsmOperandClass; |
| } |
| |
| def uimm5_plus32_normalize_64 : Operand<i64> { |
| let PrintMethod = "printUImm<5>"; |
| let ParserMatchClass = ConstantUImm5Plus32NormalizeAsmOperandClass; |
| } |
| |
| def uimm6_lsl2 : Operand<OtherVT> { |
| let EncoderMethod = "getUImm6Lsl2Encoding"; |
| let DecoderMethod = "DecodeUImmWithOffsetAndScale<6, 0, 4>"; |
| let ParserMatchClass = ConstantUImm6Lsl2AsmOperandClass; |
| } |
| |
| foreach I = {16} in |
| def uimm # I : Operand<i32> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("UImm" # I # "AsmOperandClass"); |
| } |
| |
| // Like uimm16_64 but coerces simm16 to uimm16. |
| def uimm16_relaxed : Operand<i32> { |
| let PrintMethod = "printUImm<16>"; |
| let ParserMatchClass = UImm16RelaxedAsmOperandClass; |
| } |
| |
| foreach I = {5} in |
| def uimm # I # _64 : Operand<i64> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantUImm" # I # "AsmOperandClass"); |
| } |
| |
| foreach I = {16} in |
| def uimm # I # _64 : Operand<i64> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("UImm" # I # "AsmOperandClass"); |
| } |
| |
| // Like uimm16_64 but coerces simm16 to uimm16. |
| def uimm16_64_relaxed : Operand<i64> { |
| let PrintMethod = "printUImm<16>"; |
| let ParserMatchClass = UImm16RelaxedAsmOperandClass; |
| } |
| |
| def uimm16_altrelaxed : Operand<i32> { |
| let PrintMethod = "printUImm<16>"; |
| let ParserMatchClass = UImm16AltRelaxedAsmOperandClass; |
| } |
| // Like uimm5 but reports a less confusing error for 32-63 when |
| // an instruction alias permits that. |
| def uimm5_report_uimm6 : Operand<i32> { |
| let PrintMethod = "printUImm<6>"; |
| let ParserMatchClass = ConstantUImm5ReportUImm6AsmOperandClass; |
| } |
| |
| // Like uimm5_64 but reports a less confusing error for 32-63 when |
| // an instruction alias permits that. |
| def uimm5_64_report_uimm6 : Operand<i64> { |
| let PrintMethod = "printUImm<5>"; |
| let ParserMatchClass = ConstantUImm5ReportUImm6AsmOperandClass; |
| } |
| |
| foreach I = {1, 2, 3, 4} in |
| def uimm # I # _ptr : Operand<iPTR> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantUImm" # I # "AsmOperandClass"); |
| } |
| |
| foreach I = {1, 2, 3, 4, 5, 6, 8} in |
| def vsplat_uimm # I : Operand<vAny> { |
| let PrintMethod = "printUImm<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantUImm" # I # "AsmOperandClass"); |
| } |
| |
| // Signed operands |
| foreach I = {4, 5, 6, 9, 10, 11} in |
| def simm # I : Operand<i32> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantSImm" # I # "AsmOperandClass"); |
| } |
| |
| foreach I = {1, 2, 3} in |
| def simm10_lsl # I : Operand<i32> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<10, " # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantSImm10Lsl" # I # "AsmOperandClass"); |
| } |
| |
| foreach I = {10} in |
| def simm # I # _64 : Operand<i64> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<" # I # ">"; |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantSImm" # I # "AsmOperandClass"); |
| } |
| |
| foreach I = {5, 10} in |
| def vsplat_simm # I : Operand<vAny> { |
| let ParserMatchClass = |
| !cast<AsmOperandClass>("ConstantSImm" # I # "AsmOperandClass"); |
| } |
| |
| def simm7_lsl2 : Operand<OtherVT> { |
| let EncoderMethod = "getSImm7Lsl2Encoding"; |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<" # I # ", 0, 4>"; |
| let ParserMatchClass = ConstantSImm7Lsl2AsmOperandClass; |
| } |
| |
| foreach I = {16, 32} in |
| def simm # I : Operand<i32> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<" # I # ">"; |
| let ParserMatchClass = !cast<AsmOperandClass>("SImm" # I # "AsmOperandClass"); |
| } |
| |
| // Like simm16 but coerces uimm16 to simm16. |
| def simm16_relaxed : Operand<i32> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<16>"; |
| let ParserMatchClass = SImm16RelaxedAsmOperandClass; |
| } |
| |
| def simm16_64 : Operand<i64> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<16>"; |
| let ParserMatchClass = SImm16AsmOperandClass; |
| } |
| |
| // like simm32 but coerces simm32 to uimm32. |
| def uimm32_coerced : Operand<i32> { |
| let ParserMatchClass = UImm32CoercedAsmOperandClass; |
| } |
| // Like simm32 but coerces uimm32 to simm32. |
| def simm32_relaxed : Operand<i32> { |
| let DecoderMethod = "DecodeSImmWithOffsetAndScale<32>"; |
| let ParserMatchClass = SImm32RelaxedAsmOperandClass; |
| } |
| |
| // This is almost the same as a uimm7 but 0x7f is interpreted as -1. |
| def li16_imm : Operand<i32> { |
| let DecoderMethod = "DecodeLi16Imm"; |
| let ParserMatchClass = ConstantUImm7Sub1AsmOperandClass; |
| } |
| |
| def MipsMemAsmOperand : AsmOperandClass { |
| let Name = "Mem"; |
| let ParserMethod = "parseMemOperand"; |
| } |
| |
| class MipsMemSimmAsmOperand<int Width, int Shift = 0> : AsmOperandClass { |
| let Name = "MemOffsetSimm" # Width # "_" # Shift; |
| let SuperClasses = [MipsMemAsmOperand]; |
| let RenderMethod = "addMemOperands"; |
| let ParserMethod = "parseMemOperand"; |
| let PredicateMethod = "isMemWithSimmOffset<" # Width # ", " # Shift # ">"; |
| let DiagnosticType = !if(!eq(Shift, 0), "MemSImm" # Width, |
| "MemSImm" # Width # "Lsl" # Shift); |
| } |
| |
| def MipsMemSimmPtrAsmOperand : AsmOperandClass { |
| let Name = "MemOffsetSimmPtr"; |
| let SuperClasses = [MipsMemAsmOperand]; |
| let RenderMethod = "addMemOperands"; |
| let ParserMethod = "parseMemOperand"; |
| let PredicateMethod = "isMemWithPtrSizeOffset"; |
| let DiagnosticType = "MemSImmPtr"; |
| } |
| |
| def MipsInvertedImmoperand : AsmOperandClass { |
| let Name = "InvNum"; |
| let RenderMethod = "addImmOperands"; |
| let ParserMethod = "parseInvNum"; |
| } |
| |
| def InvertedImOperand : Operand<i32> { |
| let ParserMatchClass = MipsInvertedImmoperand; |
| } |
| |
| def InvertedImOperand64 : Operand<i64> { |
| let ParserMatchClass = MipsInvertedImmoperand; |
| } |
| |
| class mem_generic : Operand<iPTR> { |
| let PrintMethod = "printMemOperand"; |
| let MIOperandInfo = (ops ptr_rc, simm16); |
| let EncoderMethod = "getMemEncoding"; |
| let ParserMatchClass = MipsMemAsmOperand; |
| let OperandType = "OPERAND_MEMORY"; |
| } |
| |
| // Address operand |
| def mem : mem_generic; |
| |
| // MSA specific address operand |
| def mem_msa : mem_generic { |
| let MIOperandInfo = (ops ptr_rc, simm10); |
| let EncoderMethod = "getMSAMemEncoding"; |
| } |
| |
| def simm12 : Operand<i32> { |
| let DecoderMethod = "DecodeSimm12"; |
| } |
| |
| def mem_simm9_exp : mem_generic { |
| let MIOperandInfo = (ops ptr_rc, simm9); |
| let ParserMatchClass = MipsMemSimmPtrAsmOperand; |
| let OperandNamespace = "MipsII"; |
| let OperandType = "OPERAND_MEM_SIMM9"; |
| } |
| |
| foreach I = {9, 10, 11, 12, 16} in |
| def mem_simm # I : mem_generic { |
| let MIOperandInfo = (ops ptr_rc, !cast<Operand>("simm" # I)); |
| let ParserMatchClass = MipsMemSimmAsmOperand<I>; |
| } |
| |
| foreach I = {1, 2, 3} in |
| def mem_simm10_lsl # I : mem_generic { |
| let MIOperandInfo = (ops ptr_rc, !cast<Operand>("simm10_lsl" # I)); |
| let EncoderMethod = "getMemEncoding<" # I # ">"; |
| let ParserMatchClass = MipsMemSimmAsmOperand<10, I>; |
| } |
| |
| def mem_simmptr : mem_generic { |
| let ParserMatchClass = MipsMemSimmPtrAsmOperand; |
| } |
| |
| def mem_ea : Operand<iPTR> { |
| let PrintMethod = "printMemOperandEA"; |
| let MIOperandInfo = (ops ptr_rc, simm16); |
| let EncoderMethod = "getMemEncoding"; |
| let OperandType = "OPERAND_MEMORY"; |
| } |
| |
| def PtrRC : Operand<iPTR> { |
| let MIOperandInfo = (ops ptr_rc); |
| let DecoderMethod = "DecodePtrRegisterClass"; |
| let ParserMatchClass = GPR32AsmOperand; |
| } |
| |
| // size operand of ins instruction |
| def size_ins : Operand<i32> { |
| let EncoderMethod = "getSizeInsEncoding"; |
| let DecoderMethod = "DecodeInsSize"; |
| } |
| |
| // Transformation Function - get the lower 16 bits. |
| def LO16 : SDNodeXForm<imm, [{ |
| return getImm(N, N->getZExtValue() & 0xFFFF); |
| }]>; |
| |
| // Transformation Function - get the higher 16 bits. |
| def HI16 : SDNodeXForm<imm, [{ |
| return getImm(N, (N->getZExtValue() >> 16) & 0xFFFF); |
| }]>; |
| |
| // Plus 1. |
| def Plus1 : SDNodeXForm<imm, [{ return getImm(N, N->getSExtValue() + 1); }]>; |
| |
| // Node immediate is zero (e.g. insve.d) |
| def immz : PatLeaf<(imm), [{ return N->getSExtValue() == 0; }]>; |
| |
| // Node immediate fits as 16-bit sign extended on target immediate. |
| // e.g. addi, andi |
| def immSExt8 : PatLeaf<(imm), [{ return isInt<8>(N->getSExtValue()); }]>; |
| |
| // Node immediate fits as 16-bit sign extended on target immediate. |
| // e.g. addi, andi |
| def immSExt16 : PatLeaf<(imm), [{ return isInt<16>(N->getSExtValue()); }]>; |
| def imm32SExt16 : IntImmLeaf<i32, [{ return isInt<16>(Imm.getSExtValue()); }]>; |
| |
| // Node immediate fits as 7-bit zero extended on target immediate. |
| def immZExt7 : PatLeaf<(imm), [{ return isUInt<7>(N->getZExtValue()); }]>; |
| def timmZExt7 : PatLeaf<(timm), [{ return isUInt<7>(N->getZExtValue()); }]>; |
| |
| // Node immediate fits as 16-bit zero extended on target immediate. |
| // The LO16 param means that only the lower 16 bits of the node |
| // immediate are caught. |
| // e.g. addiu, sltiu |
| def immZExt16 : PatLeaf<(imm), [{ |
| if (N->getValueType(0) == MVT::i32) |
| return (uint32_t)N->getZExtValue() == (unsigned short)N->getZExtValue(); |
| else |
| return (uint64_t)N->getZExtValue() == (unsigned short)N->getZExtValue(); |
| }], LO16>; |
| def imm32ZExt16 : IntImmLeaf<i32, [{ |
| return (uint32_t)Imm.getZExtValue() == (unsigned short)Imm.getZExtValue(); |
| }]>; |
| |
| // Immediate can be loaded with LUi (32-bit int with lower 16-bit cleared). |
| def immSExt32Low16Zero : PatLeaf<(imm), [{ |
| int64_t Val = N->getSExtValue(); |
| return isInt<32>(Val) && !(Val & 0xffff); |
| }]>; |
| |
| // Zero-extended 32-bit unsigned int with lower 16-bit cleared. |
| def immZExt32Low16Zero : PatLeaf<(imm), [{ |
| uint64_t Val = N->getZExtValue(); |
| return isUInt<32>(Val) && !(Val & 0xffff); |
| }]>; |
| |
| // Note immediate fits as a 32 bit signed extended on target immediate. |
| def immSExt32 : PatLeaf<(imm), [{ return isInt<32>(N->getSExtValue()); }]>; |
| |
| // Note immediate fits as a 32 bit zero extended on target immediate. |
| def immZExt32 : PatLeaf<(imm), [{ return isUInt<32>(N->getZExtValue()); }]>; |
| |
| // shamt field must fit in 5 bits. |
| def immZExt5 : ImmLeaf<i32, [{return Imm == (Imm & 0x1f);}]>; |
| def timmZExt5 : TImmLeaf<i32, [{return Imm == (Imm & 0x1f);}]>; |
| |
| def immZExt5Plus1 : PatLeaf<(imm), [{ |
| return isUInt<5>(N->getZExtValue() - 1); |
| }]>; |
| def immZExt5Plus32 : PatLeaf<(imm), [{ |
| return isUInt<5>(N->getZExtValue() - 32); |
| }]>; |
| def immZExt5Plus33 : PatLeaf<(imm), [{ |
| return isUInt<5>(N->getZExtValue() - 33); |
| }]>; |
| |
| def immZExt5To31 : SDNodeXForm<imm, [{ |
| return getImm(N, 31 - N->getZExtValue()); |
| }]>; |
| |
| // True if (N + 1) fits in 16-bit field. |
| def immSExt16Plus1 : PatLeaf<(imm), [{ |
| return isInt<17>(N->getSExtValue()) && isInt<16>(N->getSExtValue() + 1); |
| }]>; |
| |
| def immZExtRange2To64 : PatLeaf<(imm), [{ |
| return isUInt<7>(N->getZExtValue()) && (N->getZExtValue() >= 2) && |
| (N->getZExtValue() <= 64); |
| }]>; |
| |
| def ORiPred : PatLeaf<(imm), [{ |
| return isUInt<16>(N->getZExtValue()) && !isInt<16>(N->getSExtValue()); |
| }], LO16>; |
| |
| def LUiPred : PatLeaf<(imm), [{ |
| int64_t Val = N->getSExtValue(); |
| return !isInt<16>(Val) && isInt<32>(Val) && !(Val & 0xffff); |
| }]>; |
| |
| def LUiORiPred : PatLeaf<(imm), [{ |
| int64_t SVal = N->getSExtValue(); |
| return isInt<32>(SVal) && (SVal & 0xffff); |
| }]>; |
| |
| // Mips Address Mode! SDNode frameindex could possibily be a match |
| // since load and store instructions from stack used it. |
| def addr : |
| ComplexPattern<iPTR, 2, "selectIntAddr", [frameindex]>; |
| |
| def addrRegImm : |
| ComplexPattern<iPTR, 2, "selectAddrRegImm", [frameindex]>; |
| |
| def addrDefault : |
| ComplexPattern<iPTR, 2, "selectAddrDefault", [frameindex]>; |
| |
| def addrimm10 : ComplexPattern<iPTR, 2, "selectIntAddrSImm10", [frameindex]>; |
| def addrimm10lsl1 : ComplexPattern<iPTR, 2, "selectIntAddrSImm10Lsl1", |
| [frameindex]>; |
| def addrimm10lsl2 : ComplexPattern<iPTR, 2, "selectIntAddrSImm10Lsl2", |
| [frameindex]>; |
| def addrimm10lsl3 : ComplexPattern<iPTR, 2, "selectIntAddrSImm10Lsl3", |
| [frameindex]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Instructions specific format |
| //===----------------------------------------------------------------------===// |
| |
| // Arithmetic and logical instructions with 3 register operands. |
| class ArithLogicR<string opstr, RegisterOperand RO, bit isComm = 0, |
| InstrItinClass Itin = NoItinerary, |
| SDPatternOperator OpNode = null_frag>: |
| InstSE<(outs RO:$rd), (ins RO:$rs, RO:$rt), |
| !strconcat(opstr, "\t$rd, $rs, $rt"), |
| [(set RO:$rd, (OpNode RO:$rs, RO:$rt))], Itin, FrmR, opstr> { |
| let isCommutable = isComm; |
| let isReMaterializable = 1; |
| let TwoOperandAliasConstraint = "$rd = $rs"; |
| } |
| |
| // Arithmetic and logical instructions with 2 register operands. |
| class ArithLogicI<string opstr, Operand Od, RegisterOperand RO, |
| InstrItinClass Itin = NoItinerary, |
| SDPatternOperator imm_type = null_frag, |
| SDPatternOperator OpNode = null_frag> : |
| InstSE<(outs RO:$rt), (ins RO:$rs, Od:$imm16), |
| !strconcat(opstr, "\t$rt, $rs, $imm16"), |
| [(set RO:$rt, (OpNode RO:$rs, imm_type:$imm16))], |
| Itin, FrmI, opstr> { |
| let isReMaterializable = 1; |
| let TwoOperandAliasConstraint = "$rs = $rt"; |
| } |
| |
| // Arithmetic Multiply ADD/SUB |
| class MArithR<string opstr, InstrItinClass itin, bit isComm = 0> : |
| InstSE<(outs), (ins GPR32Opnd:$rs, GPR32Opnd:$rt), |
| !strconcat(opstr, "\t$rs, $rt"), [], itin, FrmR, opstr> { |
| let Defs = [HI0, LO0]; |
| let Uses = [HI0, LO0]; |
| let isCommutable = isComm; |
| } |
| |
| // Logical |
| class LogicNOR<string opstr, RegisterOperand RO>: |
| InstSE<(outs RO:$rd), (ins RO:$rs, RO:$rt), |
| !strconcat(opstr, "\t$rd, $rs, $rt"), |
| [(set RO:$rd, (not (or RO:$rs, RO:$rt)))], II_NOR, FrmR, opstr> { |
| let isCommutable = 1; |
| } |
| |
| // Shifts |
| class shift_rotate_imm<string opstr, Operand ImmOpnd, |
| RegisterOperand RO, InstrItinClass itin, |
| SDPatternOperator OpNode = null_frag, |
| SDPatternOperator PF = null_frag> : |
| InstSE<(outs RO:$rd), (ins RO:$rt, ImmOpnd:$shamt), |
| !strconcat(opstr, "\t$rd, $rt, $shamt"), |
| [(set RO:$rd, (OpNode RO:$rt, PF:$shamt))], itin, FrmR, opstr> { |
| let TwoOperandAliasConstraint = "$rt = $rd"; |
| } |
| |
| class shift_rotate_reg<string opstr, RegisterOperand RO, InstrItinClass itin, |
| SDPatternOperator OpNode = null_frag>: |
| InstSE<(outs RO:$rd), (ins RO:$rt, GPR32Opnd:$rs), |
| !strconcat(opstr, "\t$rd, $rt, $rs"), |
| [(set RO:$rd, (OpNode RO:$rt, GPR32Opnd:$rs))], itin, FrmR, |
| opstr>; |
| |
| // Load Upper Immediate |
| class LoadUpper<string opstr, RegisterOperand RO, Operand Imm>: |
| InstSE<(outs RO:$rt), (ins Imm:$imm16), !strconcat(opstr, "\t$rt, $imm16"), |
| [], II_LUI, FrmI, opstr>, IsAsCheapAsAMove { |
| let hasSideEffects = 0; |
| let isReMaterializable = 1; |
| } |
| |
| // Memory Load/Store |
| class LoadMemory<string opstr, DAGOperand RO, DAGOperand MO, |
| SDPatternOperator OpNode = null_frag, |
| InstrItinClass Itin = NoItinerary, |
| ComplexPattern Addr = addr> : |
| InstSE<(outs RO:$rt), (ins MO:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(set RO:$rt, (OpNode Addr:$addr))], Itin, FrmI, opstr> { |
| let DecoderMethod = "DecodeMem"; |
| let canFoldAsLoad = 1; |
| string BaseOpcode = opstr; |
| let mayLoad = 1; |
| } |
| |
| class Load<string opstr, DAGOperand RO, SDPatternOperator OpNode = null_frag, |
| InstrItinClass Itin = NoItinerary, ComplexPattern Addr = addr> : |
| LoadMemory<opstr, RO, mem, OpNode, Itin, Addr>; |
| |
| class StoreMemory<string opstr, DAGOperand RO, DAGOperand MO, |
| SDPatternOperator OpNode = null_frag, |
| InstrItinClass Itin = NoItinerary, ComplexPattern Addr = addr> : |
| InstSE<(outs), (ins RO:$rt, MO:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(OpNode RO:$rt, Addr:$addr)], Itin, FrmI, opstr> { |
| let DecoderMethod = "DecodeMem"; |
| string BaseOpcode = opstr; |
| let mayStore = 1; |
| } |
| |
| class Store<string opstr, DAGOperand RO, SDPatternOperator OpNode = null_frag, |
| InstrItinClass Itin = NoItinerary, ComplexPattern Addr = addr, |
| DAGOperand MO = mem> : |
| StoreMemory<opstr, RO, MO, OpNode, Itin, Addr>; |
| |
| // Load/Store Left/Right |
| let canFoldAsLoad = 1 in |
| class LoadLeftRight<string opstr, SDNode OpNode, RegisterOperand RO, |
| InstrItinClass Itin> : |
| InstSE<(outs RO:$rt), (ins mem:$addr, RO:$src), |
| !strconcat(opstr, "\t$rt, $addr"), |
| [(set RO:$rt, (OpNode addr:$addr, RO:$src))], Itin, FrmI> { |
| let DecoderMethod = "DecodeMem"; |
| string Constraints = "$src = $rt"; |
| let BaseOpcode = opstr; |
| } |
| |
| class StoreLeftRight<string opstr, SDNode OpNode, RegisterOperand RO, |
| InstrItinClass Itin> : |
| InstSE<(outs), (ins RO:$rt, mem:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(OpNode RO:$rt, addr:$addr)], Itin, FrmI> { |
| let DecoderMethod = "DecodeMem"; |
| let BaseOpcode = opstr; |
| } |
| |
| // COP2 Load/Store |
| class LW_FT2<string opstr, RegisterOperand RC, InstrItinClass Itin, |
| SDPatternOperator OpNode= null_frag> : |
| InstSE<(outs RC:$rt), (ins mem_simm16:$addr), |
| !strconcat(opstr, "\t$rt, $addr"), |
| [(set RC:$rt, (OpNode addrDefault:$addr))], Itin, FrmFI, opstr> { |
| let DecoderMethod = "DecodeFMem2"; |
| let mayLoad = 1; |
| } |
| |
| class SW_FT2<string opstr, RegisterOperand RC, InstrItinClass Itin, |
| SDPatternOperator OpNode= null_frag> : |
| InstSE<(outs), (ins RC:$rt, mem_simm16:$addr), |
| !strconcat(opstr, "\t$rt, $addr"), |
| [(OpNode RC:$rt, addrDefault:$addr)], Itin, FrmFI, opstr> { |
| let DecoderMethod = "DecodeFMem2"; |
| let mayStore = 1; |
| } |
| |
| // COP3 Load/Store |
| class LW_FT3<string opstr, RegisterOperand RC, InstrItinClass Itin, |
| SDPatternOperator OpNode= null_frag> : |
| InstSE<(outs RC:$rt), (ins mem:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(set RC:$rt, (OpNode addrDefault:$addr))], Itin, FrmFI, opstr> { |
| let DecoderMethod = "DecodeFMem3"; |
| let mayLoad = 1; |
| } |
| |
| class SW_FT3<string opstr, RegisterOperand RC, InstrItinClass Itin, |
| SDPatternOperator OpNode= null_frag> : |
| InstSE<(outs), (ins RC:$rt, mem:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(OpNode RC:$rt, addrDefault:$addr)], Itin, FrmFI, opstr> { |
| let DecoderMethod = "DecodeFMem3"; |
| let mayStore = 1; |
| } |
| |
| // Conditional Branch |
| class CBranch<string opstr, DAGOperand opnd, PatFrag cond_op, |
| RegisterOperand RO> : |
| InstSE<(outs), (ins RO:$rs, RO:$rt, opnd:$offset), |
| !strconcat(opstr, "\t$rs, $rt, $offset"), |
| [(brcond (i32 (cond_op RO:$rs, RO:$rt)), bb:$offset)], II_BCC, |
| FrmI, opstr> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let hasDelaySlot = 1; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| class CBranchLikely<string opstr, DAGOperand opnd, RegisterOperand RO> : |
| InstSE<(outs), (ins RO:$rs, RO:$rt, opnd:$offset), |
| !strconcat(opstr, "\t$rs, $rt, $offset"), [], II_BCC, FrmI, opstr> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let hasDelaySlot = 1; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| class CBranchZero<string opstr, DAGOperand opnd, PatFrag cond_op, |
| RegisterOperand RO> : |
| InstSE<(outs), (ins RO:$rs, opnd:$offset), |
| !strconcat(opstr, "\t$rs, $offset"), |
| [(brcond (i32 (cond_op RO:$rs, 0)), bb:$offset)], II_BCCZ, |
| FrmI, opstr> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let hasDelaySlot = 1; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| class CBranchZeroLikely<string opstr, DAGOperand opnd, RegisterOperand RO> : |
| InstSE<(outs), (ins RO:$rs, opnd:$offset), |
| !strconcat(opstr, "\t$rs, $offset"), [], II_BCCZ, FrmI, opstr> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let hasDelaySlot = 1; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| // SetCC |
| class SetCC_R<string opstr, PatFrag cond_op, RegisterOperand RO> : |
| InstSE<(outs GPR32Opnd:$rd), (ins RO:$rs, RO:$rt), |
| !strconcat(opstr, "\t$rd, $rs, $rt"), |
| [(set GPR32Opnd:$rd, (cond_op RO:$rs, RO:$rt))], |
| II_SLT_SLTU, FrmR, opstr>; |
| |
| class SetCC_I<string opstr, PatFrag cond_op, Operand Od, PatLeaf imm_type, |
| RegisterOperand RO>: |
| InstSE<(outs GPR32Opnd:$rt), (ins RO:$rs, Od:$imm16), |
| !strconcat(opstr, "\t$rt, $rs, $imm16"), |
| [(set GPR32Opnd:$rt, (cond_op RO:$rs, imm_type:$imm16))], |
| II_SLTI_SLTIU, FrmI, opstr>; |
| |
| // Jump |
| class JumpFJ<DAGOperand opnd, string opstr, SDPatternOperator operator, |
| SDPatternOperator targetoperator, string bopstr> : |
| InstSE<(outs), (ins opnd:$target), !strconcat(opstr, "\t$target"), |
| [(operator targetoperator:$target)], II_J, FrmJ, bopstr> { |
| let isTerminator=1; |
| let isBarrier=1; |
| let hasDelaySlot = 1; |
| let DecoderMethod = "DecodeJumpTarget"; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| // Unconditional branch |
| class UncondBranch<Instruction BEQInst, DAGOperand opnd> : |
| PseudoSE<(outs), (ins brtarget:$offset), [(br bb:$offset)], II_B>, |
| PseudoInstExpansion<(BEQInst ZERO, ZERO, opnd:$offset)> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let isBarrier = 1; |
| let hasDelaySlot = 1; |
| let AdditionalPredicates = [RelocPIC]; |
| let Defs = [AT]; |
| bit isCTI = 1; |
| } |
| |
| // Base class for indirect branch and return instruction classes. |
| let isTerminator=1, isBarrier=1, hasDelaySlot = 1, isCTI = 1 in |
| class JumpFR<string opstr, RegisterOperand RO, |
| SDPatternOperator operator = null_frag>: |
| InstSE<(outs), (ins RO:$rs), "jr\t$rs", [(operator RO:$rs)], II_JR, |
| FrmR, opstr>; |
| |
| // Indirect branch |
| class IndirectBranch<string opstr, RegisterOperand RO> : JumpFR<opstr, RO> { |
| let isBranch = 1; |
| let isIndirectBranch = 1; |
| } |
| |
| // Jump and Link (Call) |
| let isCall=1, hasDelaySlot=1, isCTI=1, Defs = [RA] in { |
| class JumpLink<string opstr, DAGOperand opnd> : |
| InstSE<(outs), (ins opnd:$target), !strconcat(opstr, "\t$target"), |
| [(MipsJmpLink tglobaladdr:$target)], II_JAL, FrmJ, opstr> { |
| let DecoderMethod = "DecodeJumpTarget"; |
| } |
| |
| class JumpLinkRegPseudo<RegisterOperand RO, Instruction JALRInst, |
| Register RetReg, RegisterOperand ResRO = RO>: |
| PseudoSE<(outs), (ins RO:$rs), [(MipsJmpLink RO:$rs)], II_JALR>, |
| PseudoInstExpansion<(JALRInst RetReg, ResRO:$rs)> { |
| let hasPostISelHook = 1; |
| } |
| |
| class JumpLinkReg<string opstr, RegisterOperand RO>: |
| InstSE<(outs RO:$rd), (ins RO:$rs), !strconcat(opstr, "\t$rd, $rs"), |
| [], II_JALR, FrmR, opstr> { |
| let hasPostISelHook = 1; |
| } |
| |
| class BGEZAL_FT<string opstr, DAGOperand opnd, |
| RegisterOperand RO> : |
| InstSE<(outs), (ins RO:$rs, opnd:$offset), |
| !strconcat(opstr, "\t$rs, $offset"), [], II_BCCZAL, FrmI, opstr> { |
| let hasDelaySlot = 1; |
| } |
| |
| } |
| |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, hasDelaySlot = 1, |
| hasExtraSrcRegAllocReq = 1, isCTI = 1, Defs = [AT] in { |
| class TailCall<Instruction JumpInst, DAGOperand Opnd> : |
| PseudoSE<(outs), (ins calltarget:$target), [], II_J>, |
| PseudoInstExpansion<(JumpInst Opnd:$target)>; |
| |
| class TailCallReg<Instruction JumpInst, RegisterOperand RO> : |
| PseudoSE<(outs), (ins RO:$rs), [(MipsTailCall RO:$rs)], II_JR>, |
| PseudoInstExpansion<(JumpInst RO:$rs)> { |
| let hasPostISelHook = 1; |
| } |
| } |
| |
| class BAL_BR_Pseudo<Instruction RealInst, DAGOperand opnd> : |
| PseudoSE<(outs), (ins opnd:$offset), [], II_BCCZAL>, |
| PseudoInstExpansion<(RealInst ZERO, opnd:$offset)> { |
| let isBranch = 1; |
| let isTerminator = 1; |
| let isBarrier = 1; |
| let hasDelaySlot = 1; |
| let Defs = [RA]; |
| bit isCTI = 1; |
| } |
| |
| let isCTI = 1 in { |
| // Syscall |
| class SYS_FT<string opstr, Operand ImmOp, InstrItinClass itin = NoItinerary> : |
| InstSE<(outs), (ins ImmOp:$code_), |
| !strconcat(opstr, "\t$code_"), [], itin, FrmI, opstr>; |
| // Break |
| class BRK_FT<string opstr> : |
| InstSE<(outs), (ins uimm10:$code_1, uimm10:$code_2), |
| !strconcat(opstr, "\t$code_1, $code_2"), [], II_BREAK, |
| FrmOther, opstr>; |
| |
| // (D)Eret |
| class ER_FT<string opstr, InstrItinClass itin = NoItinerary> : |
| InstSE<(outs), (ins), |
| opstr, [], itin, FrmOther, opstr>; |
| |
| // Wait |
| class WAIT_FT<string opstr> : |
| InstSE<(outs), (ins), opstr, [], II_WAIT, FrmOther, opstr>; |
| } |
| |
| // Interrupts |
| class DEI_FT<string opstr, RegisterOperand RO, |
| InstrItinClass itin = NoItinerary> : |
| InstSE<(outs RO:$rt), (ins), |
| !strconcat(opstr, "\t$rt"), [], itin, FrmOther, opstr>; |
| |
| // Sync |
| let hasSideEffects = 1 in |
| class SYNC_FT<string opstr> : |
| InstSE<(outs), (ins uimm5:$stype), "sync $stype", |
| [(MipsSync immZExt5:$stype)], II_SYNC, FrmOther, opstr>; |
| |
| class SYNCI_FT<string opstr, DAGOperand MO> : |
| InstSE<(outs), (ins MO:$addr), !strconcat(opstr, "\t$addr"), [], |
| II_SYNCI, FrmOther, opstr> { |
| let hasSideEffects = 1; |
| let DecoderMethod = "DecodeSyncI"; |
| } |
| |
| let hasSideEffects = 1, isCTI = 1 in { |
| class TEQ_FT<string opstr, RegisterOperand RO, Operand ImmOp, |
| InstrItinClass itin = NoItinerary> : |
| InstSE<(outs), (ins RO:$rs, RO:$rt, ImmOp:$code_), |
| !strconcat(opstr, "\t$rs, $rt, $code_"), [], itin, FrmI, opstr>; |
| |
| class TEQI_FT<string opstr, RegisterOperand RO, |
| InstrItinClass itin = NoItinerary> : |
| InstSE<(outs), (ins RO:$rs, simm16:$imm16), |
| !strconcat(opstr, "\t$rs, $imm16"), [], itin, FrmOther, opstr>; |
| } |
| |
| // Mul, Div |
| class Mult<string opstr, InstrItinClass itin, RegisterOperand RO, |
| list<Register> DefRegs> : |
| InstSE<(outs), (ins RO:$rs, RO:$rt), !strconcat(opstr, "\t$rs, $rt"), [], |
| itin, FrmR, opstr> { |
| let isCommutable = 1; |
| let Defs = DefRegs; |
| let hasSideEffects = 0; |
| } |
| |
| // Pseudo multiply/divide instruction with explicit accumulator register |
| // operands. |
| class MultDivPseudo<Instruction RealInst, RegisterClass R0, RegisterOperand R1, |
| SDPatternOperator OpNode, InstrItinClass Itin, |
| bit IsComm = 1, bit HasSideEffects = 0, |
| bit UsesCustomInserter = 0> : |
| PseudoSE<(outs R0:$ac), (ins R1:$rs, R1:$rt), |
| [(set R0:$ac, (OpNode R1:$rs, R1:$rt))], Itin>, |
| PseudoInstExpansion<(RealInst R1:$rs, R1:$rt)> { |
| let isCommutable = IsComm; |
| let hasSideEffects = HasSideEffects; |
| let usesCustomInserter = UsesCustomInserter; |
| } |
| |
| // Pseudo multiply add/sub instruction with explicit accumulator register |
| // operands. |
| class MAddSubPseudo<Instruction RealInst, SDPatternOperator OpNode, |
| InstrItinClass itin> |
| : PseudoSE<(outs ACC64:$ac), |
| (ins GPR32Opnd:$rs, GPR32Opnd:$rt, ACC64:$acin), |
| [(set ACC64:$ac, |
| (OpNode GPR32Opnd:$rs, GPR32Opnd:$rt, ACC64:$acin))], |
| itin>, |
| PseudoInstExpansion<(RealInst GPR32Opnd:$rs, GPR32Opnd:$rt)> { |
| string Constraints = "$acin = $ac"; |
| } |
| |
| class Div<string opstr, InstrItinClass itin, RegisterOperand RO, |
| list<Register> DefRegs> : |
| InstSE<(outs), (ins RO:$rs, RO:$rt), !strconcat(opstr, "\t$$zero, $rs, $rt"), |
| [], itin, FrmR, opstr> { |
| let Defs = DefRegs; |
| } |
| |
| // Move from Hi/Lo |
| class PseudoMFLOHI<RegisterClass DstRC, RegisterClass SrcRC, SDNode OpNode> |
| : PseudoSE<(outs DstRC:$rd), (ins SrcRC:$hilo), |
| [(set DstRC:$rd, (OpNode SrcRC:$hilo))], II_MFHI_MFLO>; |
| |
| class MoveFromLOHI<string opstr, RegisterOperand RO, Register UseReg>: |
| InstSE<(outs RO:$rd), (ins), !strconcat(opstr, "\t$rd"), [], II_MFHI_MFLO, |
| FrmR, opstr> { |
| let Uses = [UseReg]; |
| let hasSideEffects = 0; |
| let isMoveReg = 1; |
| } |
| |
| class PseudoMTLOHI<RegisterClass DstRC, RegisterClass SrcRC> |
| : PseudoSE<(outs DstRC:$lohi), (ins SrcRC:$lo, SrcRC:$hi), |
| [(set DstRC:$lohi, (MipsMTLOHI SrcRC:$lo, SrcRC:$hi))], |
| II_MTHI_MTLO>; |
| |
| class MoveToLOHI<string opstr, RegisterOperand RO, list<Register> DefRegs>: |
| InstSE<(outs), (ins RO:$rs), !strconcat(opstr, "\t$rs"), [], II_MTHI_MTLO, |
| FrmR, opstr> { |
| let Defs = DefRegs; |
| let hasSideEffects = 0; |
| let isMoveReg = 1; |
| } |
| |
| class EffectiveAddress<string opstr, RegisterOperand RO> : |
| InstSE<(outs RO:$rt), (ins mem_ea:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [(set RO:$rt, addr:$addr)], II_ADDIU, FrmI, |
| !strconcat(opstr, "_lea")> { |
| let isCodeGenOnly = 1; |
| let hasNoSchedulingInfo = 1; |
| let DecoderMethod = "DecodeMem"; |
| } |
| |
| // Count Leading Ones/Zeros in Word |
| class CountLeading0<string opstr, RegisterOperand RO, |
| InstrItinClass itin = NoItinerary>: |
| InstSE<(outs RO:$rd), (ins RO:$rs), !strconcat(opstr, "\t$rd, $rs"), |
| [(set RO:$rd, (ctlz RO:$rs))], itin, FrmR, opstr>; |
| |
| class CountLeading1<string opstr, RegisterOperand RO, |
| InstrItinClass itin = NoItinerary>: |
| InstSE<(outs RO:$rd), (ins RO:$rs), !strconcat(opstr, "\t$rd, $rs"), |
| [(set RO:$rd, (ctlz (not RO:$rs)))], itin, FrmR, opstr>; |
| |
| // Sign Extend in Register. |
| class SignExtInReg<string opstr, ValueType vt, RegisterOperand RO, |
| InstrItinClass itin> : |
| InstSE<(outs RO:$rd), (ins RO:$rt), !strconcat(opstr, "\t$rd, $rt"), |
| [(set RO:$rd, (sext_inreg RO:$rt, vt))], itin, FrmR, opstr>; |
| |
| // Subword Swap |
| class SubwordSwap<string opstr, RegisterOperand RO, |
| InstrItinClass itin = NoItinerary>: |
| InstSE<(outs RO:$rd), (ins RO:$rt), !strconcat(opstr, "\t$rd, $rt"), [], itin, |
| FrmR, opstr> { |
| let hasSideEffects = 0; |
| } |
| |
| // Read Hardware |
| class ReadHardware<RegisterOperand CPURegOperand, RegisterOperand RO> : |
| InstSE<(outs CPURegOperand:$rt), (ins RO:$rd, uimm8:$sel), |
| "rdhwr\t$rt, $rd, $sel", [], II_RDHWR, FrmR, "rdhwr">; |
| |
| // Ext and Ins |
| class ExtBase<string opstr, RegisterOperand RO, Operand PosOpnd, |
| Operand SizeOpnd, PatFrag PosImm, PatFrag SizeImm, |
| SDPatternOperator Op = null_frag> : |
| InstSE<(outs RO:$rt), (ins RO:$rs, PosOpnd:$pos, SizeOpnd:$size), |
| !strconcat(opstr, "\t$rt, $rs, $pos, $size"), |
| [(set RO:$rt, (Op RO:$rs, PosImm:$pos, SizeImm:$size))], II_EXT, |
| FrmR, opstr>; |
| |
| // 'ins' and its' 64 bit variants are matched by C++ code. |
| class InsBase<string opstr, RegisterOperand RO, Operand PosOpnd, |
| Operand SizeOpnd, PatFrag PosImm, PatFrag SizeImm>: |
| InstSE<(outs RO:$rt), (ins RO:$rs, PosOpnd:$pos, SizeOpnd:$size, RO:$src), |
| !strconcat(opstr, "\t$rt, $rs, $pos, $size"), |
| [(set RO:$rt, (null_frag RO:$rs, PosImm:$pos, SizeImm:$size, |
| RO:$src))], |
| II_INS, FrmR, opstr> { |
| let Constraints = "$src = $rt"; |
| } |
| |
| // Atomic instructions with 2 source operands (ATOMIC_SWAP & ATOMIC_LOAD_*). |
| class Atomic2Ops<PatFrag Op, RegisterClass DRC> : |
| PseudoSE<(outs DRC:$dst), (ins PtrRC:$ptr, DRC:$incr), |
| [(set DRC:$dst, (Op iPTR:$ptr, DRC:$incr))]> { |
| let hasNoSchedulingInfo = 1; |
| } |
| |
| class Atomic2OpsPostRA<RegisterClass RC> : |
| PseudoSE<(outs RC:$dst), (ins PtrRC:$ptr, RC:$incr), []> { |
| let mayLoad = 1; |
| let mayStore = 1; |
| } |
| |
| class Atomic2OpsSubwordPostRA<RegisterClass RC> : |
| PseudoSE<(outs RC:$dst), (ins PtrRC:$ptr, RC:$incr, RC:$mask, RC:$mask2, |
| RC:$shiftamnt), []>; |
| |
| // Atomic Compare & Swap. |
| // Atomic compare and swap is lowered into two stages. The first stage happens |
| // during ISelLowering, which produces the PostRA version of this instruction. |
| class AtomicCmpSwap<PatFrag Op, RegisterClass DRC> : |
| PseudoSE<(outs DRC:$dst), (ins PtrRC:$ptr, DRC:$cmp, DRC:$swap), |
| [(set DRC:$dst, (Op iPTR:$ptr, DRC:$cmp, DRC:$swap))]> { |
| let hasNoSchedulingInfo = 1; |
| } |
| |
| class AtomicCmpSwapPostRA<RegisterClass RC> : |
| PseudoSE<(outs RC:$dst), (ins PtrRC:$ptr, RC:$cmp, RC:$swap), []> { |
| let mayLoad = 1; |
| let mayStore = 1; |
| } |
| |
| class AtomicCmpSwapSubwordPostRA<RegisterClass RC> : |
| PseudoSE<(outs RC:$dst), (ins PtrRC:$ptr, RC:$mask, RC:$ShiftCmpVal, |
| RC:$mask2, RC:$ShiftNewVal, RC:$ShiftAmt), []> { |
| let mayLoad = 1; |
| let mayStore = 1; |
| } |
| |
| class LLBase<string opstr, RegisterOperand RO, DAGOperand MO = mem> : |
| InstSE<(outs RO:$rt), (ins MO:$addr), !strconcat(opstr, "\t$rt, $addr"), |
| [], II_LL, FrmI, opstr> { |
| let DecoderMethod = "DecodeMem"; |
| let mayLoad = 1; |
| } |
| |
| class SCBase<string opstr, RegisterOperand RO> : |
| InstSE<(outs RO:$dst), (ins RO:$rt, mem:$addr), |
| !strconcat(opstr, "\t$rt, $addr"), [], II_SC, FrmI> { |
| let DecoderMethod = "DecodeMem"; |
| let mayStore = 1; |
| let Constraints = "$rt = $dst"; |
| } |
| |
| class MFC3OP<string asmstr, RegisterOperand RO, RegisterOperand RD, |
| InstrItinClass itin> : |
| InstSE<(outs RO:$rt), (ins RD:$rd, uimm3:$sel), |
| !strconcat(asmstr, "\t$rt, $rd, $sel"), [], itin, FrmFR> { |
| let BaseOpcode = asmstr; |
| } |
| |
| class MTC3OP<string asmstr, RegisterOperand RO, RegisterOperand RD, |
| InstrItinClass itin> : |
| InstSE<(outs RO:$rd), (ins RD:$rt, uimm3:$sel), |
| !strconcat(asmstr, "\t$rt, $rd, $sel"), [], itin, FrmFR> { |
| let BaseOpcode = asmstr; |
| } |
| |
| class TrapBase<Instruction RealInst> |
| : PseudoSE<(outs), (ins), [(trap)], II_TRAP>, |
| PseudoInstExpansion<(RealInst 0, 0)> { |
| let isBarrier = 1; |
| let isTerminator = 1; |
| let isCodeGenOnly = 1; |
| let isCTI = 1; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Pseudo instructions |
| //===----------------------------------------------------------------------===// |
| |
| // Return RA. |
| let isReturn=1, isTerminator=1, isBarrier=1, hasCtrlDep=1, isCTI=1 in { |
| let hasDelaySlot=1 in |
| def RetRA : PseudoSE<(outs), (ins), [(MipsRet)]>; |
| |
| let hasSideEffects=1 in |
| def ERet : PseudoSE<(outs), (ins), [(MipsERet)]>; |
| } |
| |
| let Defs = [SP], Uses = [SP], hasSideEffects = 1, hasNoSchedulingInfo = 1 in { |
| def ADJCALLSTACKDOWN : MipsPseudo<(outs), (ins i32imm:$amt1, i32imm:$amt2), |
| [(callseq_start timm:$amt1, timm:$amt2)]>; |
| def ADJCALLSTACKUP : MipsPseudo<(outs), (ins i32imm:$amt1, i32imm:$amt2), |
| [(callseq_end timm:$amt1, timm:$amt2)]>; |
| } |
| |
| let usesCustomInserter = 1 in { |
| def ATOMIC_LOAD_ADD_I8 : Atomic2Ops<atomic_load_add_8, GPR32>; |
| def ATOMIC_LOAD_ADD_I16 : Atomic2Ops<atomic_load_add_16, GPR32>; |
| def ATOMIC_LOAD_ADD_I32 : Atomic2Ops<atomic_load_add_32, GPR32>; |
| def ATOMIC_LOAD_SUB_I8 : Atomic2Ops<atomic_load_sub_8, GPR32>; |
| def ATOMIC_LOAD_SUB_I16 : Atomic2Ops<atomic_load_sub_16, GPR32>; |
| def ATOMIC_LOAD_SUB_I32 : Atomic2Ops<atomic_load_sub_32, GPR32>; |
| def ATOMIC_LOAD_AND_I8 : Atomic2Ops<atomic_load_and_8, GPR32>; |
| def ATOMIC_LOAD_AND_I16 : Atomic2Ops<atomic_load_and_16, GPR32>; |
| def ATOMIC_LOAD_AND_I32 : Atomic2Ops<atomic_load_and_32, GPR32>; |
| def ATOMIC_LOAD_OR_I8 : Atomic2Ops<atomic_load_or_8, GPR32>; |
| def ATOMIC_LOAD_OR_I16 : Atomic2Ops<atomic_load_or_16, GPR32>; |
| def ATOMIC_LOAD_OR_I32 : Atomic2Ops<atomic_load_or_32, GPR32>; |
| def ATOMIC_LOAD_XOR_I8 : Atomic2Ops<atomic_load_xor_8, GPR32>; |
| def ATOMIC_LOAD_XOR_I16 : Atomic2Ops<atomic_load_xor_16, GPR32>; |
| def ATOMIC_LOAD_XOR_I32 : Atomic2Ops<atomic_load_xor_32, GPR32>; |
| def ATOMIC_LOAD_NAND_I8 : Atomic2Ops<atomic_load_nand_8, GPR32>; |
| def ATOMIC_LOAD_NAND_I16 : Atomic2Ops<atomic_load_nand_16, GPR32>; |
| def ATOMIC_LOAD_NAND_I32 : Atomic2Ops<atomic_load_nand_32, GPR32>; |
| |
| def ATOMIC_SWAP_I8 : Atomic2Ops<atomic_swap_8, GPR32>; |
| def ATOMIC_SWAP_I16 : Atomic2Ops<atomic_swap_16, GPR32>; |
| def ATOMIC_SWAP_I32 : Atomic2Ops<atomic_swap_32, GPR32>; |
| |
| def ATOMIC_CMP_SWAP_I8 : AtomicCmpSwap<atomic_cmp_swap_8, GPR32>; |
| def ATOMIC_CMP_SWAP_I16 : AtomicCmpSwap<atomic_cmp_swap_16, GPR32>; |
| def ATOMIC_CMP_SWAP_I32 : AtomicCmpSwap<atomic_cmp_swap_32, GPR32>; |
| |
| def ATOMIC_LOAD_MIN_I8 : Atomic2Ops<atomic_load_min_8, GPR32>; |
| def ATOMIC_LOAD_MIN_I16 : Atomic2Ops<atomic_load_min_16, GPR32>; |
| def ATOMIC_LOAD_MIN_I32 : Atomic2Ops<atomic_load_min_32, GPR32>; |
| def ATOMIC_LOAD_MAX_I8 : Atomic2Ops<atomic_load_max_8, GPR32>; |
| def ATOMIC_LOAD_MAX_I16 : Atomic2Ops<atomic_load_max_16, GPR32>; |
| def ATOMIC_LOAD_MAX_I32 : Atomic2Ops<atomic_load_max_32, GPR32>; |
| def ATOMIC_LOAD_UMIN_I8 : Atomic2Ops<atomic_load_umin_8, GPR32>; |
| def ATOMIC_LOAD_UMIN_I16 : Atomic2Ops<atomic_load_umin_16, GPR32>; |
| def ATOMIC_LOAD_UMIN_I32 : Atomic2Ops<atomic_load_umin_32, GPR32>; |
| def ATOMIC_LOAD_UMAX_I8 : Atomic2Ops<atomic_load_umax_8, GPR32>; |
| def ATOMIC_LOAD_UMAX_I16 : Atomic2Ops<atomic_load_umax_16, GPR32>; |
| def ATOMIC_LOAD_UMAX_I32 : Atomic2Ops<atomic_load_umax_32, GPR32>; |
| } |
| |
| def ATOMIC_LOAD_ADD_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_ADD_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_ADD_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_SUB_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_SUB_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_SUB_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_AND_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_AND_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_AND_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_OR_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_OR_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_OR_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_XOR_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_XOR_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_XOR_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_NAND_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_NAND_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_NAND_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| |
| def ATOMIC_SWAP_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_SWAP_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_SWAP_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| |
| def ATOMIC_CMP_SWAP_I8_POSTRA : AtomicCmpSwapSubwordPostRA<GPR32>; |
| def ATOMIC_CMP_SWAP_I16_POSTRA : AtomicCmpSwapSubwordPostRA<GPR32>; |
| def ATOMIC_CMP_SWAP_I32_POSTRA : AtomicCmpSwapPostRA<GPR32>; |
| |
| def ATOMIC_LOAD_MIN_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_MIN_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_MIN_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_MAX_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_MAX_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_MAX_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_UMIN_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_UMIN_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_UMIN_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| def ATOMIC_LOAD_UMAX_I8_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_UMAX_I16_POSTRA : Atomic2OpsSubwordPostRA<GPR32>; |
| def ATOMIC_LOAD_UMAX_I32_POSTRA : Atomic2OpsPostRA<GPR32>; |
| |
| /// Pseudo instructions for loading and storing accumulator registers. |
| let isPseudo = 1, isCodeGenOnly = 1, hasNoSchedulingInfo = 1 in { |
| def LOAD_ACC64 : Load<"", ACC64>; |
| def STORE_ACC64 : Store<"", ACC64>; |
| } |
| |
| // We need these two pseudo instructions to avoid offset calculation for long |
| // branches. See the comment in file MipsLongBranch.cpp for detailed |
| // explanation. |
| |
| // Expands to: lui $dst, %highest/%higher/%hi/%lo($tgt - $baltgt) |
| def LONG_BRANCH_LUi : PseudoSE<(outs GPR32Opnd:$dst), |
| (ins brtarget:$tgt, brtarget:$baltgt), []> { |
| bit hasNoSchedulingInfo = 1; |
| } |
| // Expands to: lui $dst, highest/%higher/%hi/%lo($tgt) |
| def LONG_BRANCH_LUi2Op : PseudoSE<(outs GPR32Opnd:$dst), |
| (ins brtarget:$tgt), []> { |
| bit hasNoSchedulingInfo = 1; |
| } |
| |
| // Expands to: addiu $dst, $src, %highest/%higher/%hi/%lo($tgt - $baltgt) |
| def LONG_BRANCH_ADDiu : PseudoSE<(outs GPR32Opnd:$dst), |
| (ins GPR32Opnd:$src, brtarget:$tgt, brtarget:$baltgt), []> { |
| bit hasNoSchedulingInfo = 1; |
| } |
| // Expands to: addiu $dst, $src, %highest/%higher/%hi/%lo($tgt) |
| def LONG_BRANCH_ADDiu2Op : PseudoSE<(outs GPR32Opnd:$dst), |
| (ins GPR32Opnd:$src, brtarget:$tgt), []> { |
| bit hasNoSchedulingInfo = 1; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Instruction definition |
| //===----------------------------------------------------------------------===// |
| //===----------------------------------------------------------------------===// |
| // MipsI Instructions |
| //===----------------------------------------------------------------------===// |
| |
| /// Arithmetic Instructions (ALU Immediate) |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def ADDiu : MMRel, StdMMR6Rel, ArithLogicI<"addiu", simm16_relaxed, GPR32Opnd, |
| II_ADDIU, imm32SExt16, add>, |
| ADDI_FM<0x9>, IsAsCheapAsAMove, ISA_MIPS1; |
| |
| def ANDi : MMRel, StdMMR6Rel, |
| ArithLogicI<"andi", uimm16, GPR32Opnd, II_ANDI, imm32ZExt16, and>, |
| ADDI_FM<0xc>, ISA_MIPS1; |
| def ORi : MMRel, StdMMR6Rel, |
| ArithLogicI<"ori", uimm16, GPR32Opnd, II_ORI, imm32ZExt16, or>, |
| ADDI_FM<0xd>, ISA_MIPS1; |
| def XORi : MMRel, StdMMR6Rel, |
| ArithLogicI<"xori", uimm16, GPR32Opnd, II_XORI, imm32ZExt16, xor>, |
| ADDI_FM<0xe>, ISA_MIPS1; |
| def ADDi : MMRel, ArithLogicI<"addi", simm16_relaxed, GPR32Opnd, II_ADDI>, |
| ADDI_FM<0x8>, ISA_MIPS1_NOT_32R6_64R6; |
| def SLTi : MMRel, SetCC_I<"slti", setlt, simm16, immSExt16, GPR32Opnd>, |
| SLTI_FM<0xa>, ISA_MIPS1; |
| def SLTiu : MMRel, SetCC_I<"sltiu", setult, simm16, immSExt16, GPR32Opnd>, |
| SLTI_FM<0xb>, ISA_MIPS1; |
| |
| def LUi : MMRel, LoadUpper<"lui", GPR32Opnd, uimm16_relaxed>, LUI_FM, |
| ISA_MIPS1; |
| |
| /// Arithmetic Instructions (3-Operand, R-Type) |
| def ADDu : MMRel, StdMMR6Rel, ArithLogicR<"addu", GPR32Opnd, 1, II_ADDU, add>, |
| ADD_FM<0, 0x21>, ISA_MIPS1; |
| def SUBu : MMRel, StdMMR6Rel, ArithLogicR<"subu", GPR32Opnd, 0, II_SUBU, sub>, |
| ADD_FM<0, 0x23>, ISA_MIPS1; |
| |
| let Defs = [HI0, LO0] in |
| def MUL : MMRel, ArithLogicR<"mul", GPR32Opnd, 1, II_MUL, mul>, |
| ADD_FM<0x1c, 2>, ISA_MIPS32_NOT_32R6_64R6; |
| |
| def ADD : MMRel, StdMMR6Rel, ArithLogicR<"add", GPR32Opnd, 1, II_ADD>, |
| ADD_FM<0, 0x20>, ISA_MIPS1; |
| def SUB : MMRel, StdMMR6Rel, ArithLogicR<"sub", GPR32Opnd, 0, II_SUB>, |
| ADD_FM<0, 0x22>, ISA_MIPS1; |
| |
| def SLT : MMRel, SetCC_R<"slt", setlt, GPR32Opnd>, ADD_FM<0, 0x2a>, |
| ISA_MIPS1; |
| def SLTu : MMRel, SetCC_R<"sltu", setult, GPR32Opnd>, ADD_FM<0, 0x2b>, |
| ISA_MIPS1; |
| def AND : MMRel, StdMMR6Rel, ArithLogicR<"and", GPR32Opnd, 1, II_AND, and>, |
| ADD_FM<0, 0x24>, ISA_MIPS1; |
| def OR : MMRel, StdMMR6Rel, ArithLogicR<"or", GPR32Opnd, 1, II_OR, or>, |
| ADD_FM<0, 0x25>, ISA_MIPS1; |
| def XOR : MMRel, StdMMR6Rel, ArithLogicR<"xor", GPR32Opnd, 1, II_XOR, xor>, |
| ADD_FM<0, 0x26>, ISA_MIPS1; |
| def NOR : MMRel, StdMMR6Rel, LogicNOR<"nor", GPR32Opnd>, ADD_FM<0, 0x27>, |
| ISA_MIPS1; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| /// Shift Instructions |
| def SLL : MMRel, shift_rotate_imm<"sll", uimm5, GPR32Opnd, II_SLL, shl, |
| immZExt5>, SRA_FM<0, 0>, ISA_MIPS1; |
| def SRL : MMRel, shift_rotate_imm<"srl", uimm5, GPR32Opnd, II_SRL, srl, |
| immZExt5>, SRA_FM<2, 0>, ISA_MIPS1; |
| def SRA : MMRel, shift_rotate_imm<"sra", uimm5, GPR32Opnd, II_SRA, sra, |
| immZExt5>, SRA_FM<3, 0>, ISA_MIPS1; |
| def SLLV : MMRel, shift_rotate_reg<"sllv", GPR32Opnd, II_SLLV, shl>, |
| SRLV_FM<4, 0>, ISA_MIPS1; |
| def SRLV : MMRel, shift_rotate_reg<"srlv", GPR32Opnd, II_SRLV, srl>, |
| SRLV_FM<6, 0>, ISA_MIPS1; |
| def SRAV : MMRel, shift_rotate_reg<"srav", GPR32Opnd, II_SRAV, sra>, |
| SRLV_FM<7, 0>, ISA_MIPS1; |
| |
| // Rotate Instructions |
| def ROTR : MMRel, shift_rotate_imm<"rotr", uimm5, GPR32Opnd, II_ROTR, rotr, |
| immZExt5>, |
| SRA_FM<2, 1>, ISA_MIPS32R2; |
| def ROTRV : MMRel, shift_rotate_reg<"rotrv", GPR32Opnd, II_ROTRV, rotr>, |
| SRLV_FM<6, 1>, ISA_MIPS32R2; |
| } |
| |
| /// Load and Store Instructions |
| /// aligned |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def LB : LoadMemory<"lb", GPR32Opnd, mem_simmptr, sextloadi8, II_LB>, MMRel, |
| LW_FM<0x20>, ISA_MIPS1; |
| def LBu : LoadMemory<"lbu", GPR32Opnd, mem_simmptr, zextloadi8, II_LBU, |
| addrDefault>, MMRel, LW_FM<0x24>, ISA_MIPS1; |
| def LH : LoadMemory<"lh", GPR32Opnd, mem_simmptr, sextloadi16, II_LH, |
| addrDefault>, MMRel, LW_FM<0x21>, ISA_MIPS1; |
| def LHu : LoadMemory<"lhu", GPR32Opnd, mem_simmptr, zextloadi16, II_LHU>, |
| MMRel, LW_FM<0x25>, ISA_MIPS1; |
| def LW : StdMMR6Rel, Load<"lw", GPR32Opnd, load, II_LW, addrDefault>, MMRel, |
| LW_FM<0x23>, ISA_MIPS1; |
| def SB : StdMMR6Rel, Store<"sb", GPR32Opnd, truncstorei8, II_SB>, MMRel, |
| LW_FM<0x28>, ISA_MIPS1; |
| def SH : Store<"sh", GPR32Opnd, truncstorei16, II_SH>, MMRel, LW_FM<0x29>, |
| ISA_MIPS1; |
| def SW : StdMMR6Rel, Store<"sw", GPR32Opnd, store, II_SW>, |
| MMRel, LW_FM<0x2b>, ISA_MIPS1; |
| } |
| |
| /// load/store left/right |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def LWL : MMRel, LoadLeftRight<"lwl", MipsLWL, GPR32Opnd, II_LWL>, LW_FM<0x22>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def LWR : MMRel, LoadLeftRight<"lwr", MipsLWR, GPR32Opnd, II_LWR>, LW_FM<0x26>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def SWL : MMRel, StoreLeftRight<"swl", MipsSWL, GPR32Opnd, II_SWL>, LW_FM<0x2a>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def SWR : MMRel, StoreLeftRight<"swr", MipsSWR, GPR32Opnd, II_SWR>, LW_FM<0x2e>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| |
| // COP2 Memory Instructions |
| def LWC2 : StdMMR6Rel, LW_FT2<"lwc2", COP2Opnd, II_LWC2, load>, LW_FM<0x32>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def SWC2 : StdMMR6Rel, SW_FT2<"swc2", COP2Opnd, II_SWC2, store>, |
| LW_FM<0x3a>, ISA_MIPS1_NOT_32R6_64R6; |
| def LDC2 : StdMMR6Rel, LW_FT2<"ldc2", COP2Opnd, II_LDC2, load>, LW_FM<0x36>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def SDC2 : StdMMR6Rel, SW_FT2<"sdc2", COP2Opnd, II_SDC2, store>, |
| LW_FM<0x3e>, ISA_MIPS2_NOT_32R6_64R6; |
| |
| // COP3 Memory Instructions |
| let DecoderNamespace = "COP3_" in { |
| def LWC3 : LW_FT3<"lwc3", COP3Opnd, II_LWC3, load>, LW_FM<0x33>, |
| ISA_MIPS1_NOT_32R6_64R6, NOT_ASE_CNMIPS; |
| def SWC3 : SW_FT3<"swc3", COP3Opnd, II_SWC3, store>, LW_FM<0x3b>, |
| ISA_MIPS1_NOT_32R6_64R6, NOT_ASE_CNMIPS; |
| def LDC3 : LW_FT3<"ldc3", COP3Opnd, II_LDC3, load>, LW_FM<0x37>, |
| ISA_MIPS2, NOT_ASE_CNMIPS; |
| def SDC3 : SW_FT3<"sdc3", COP3Opnd, II_SDC3, store>, LW_FM<0x3f>, |
| ISA_MIPS2, NOT_ASE_CNMIPS; |
| } |
| |
| def SYNC : MMRel, StdMMR6Rel, SYNC_FT<"sync">, SYNC_FM, ISA_MIPS2; |
| def SYNCI : MMRel, StdMMR6Rel, SYNCI_FT<"synci", mem_simm16>, SYNCI_FM, |
| ISA_MIPS32R2; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def TEQ : MMRel, TEQ_FT<"teq", GPR32Opnd, uimm10, II_TEQ>, TEQ_FM<0x34>, |
| ISA_MIPS2; |
| def TGE : MMRel, TEQ_FT<"tge", GPR32Opnd, uimm10, II_TGE>, TEQ_FM<0x30>, |
| ISA_MIPS2; |
| def TGEU : MMRel, TEQ_FT<"tgeu", GPR32Opnd, uimm10, II_TGEU>, TEQ_FM<0x31>, |
| ISA_MIPS2; |
| def TLT : MMRel, TEQ_FT<"tlt", GPR32Opnd, uimm10, II_TLT>, TEQ_FM<0x32>, |
| ISA_MIPS2; |
| def TLTU : MMRel, TEQ_FT<"tltu", GPR32Opnd, uimm10, II_TLTU>, TEQ_FM<0x33>, |
| ISA_MIPS2; |
| def TNE : MMRel, TEQ_FT<"tne", GPR32Opnd, uimm10, II_TNE>, TEQ_FM<0x36>, |
| ISA_MIPS2; |
| |
| def TEQI : MMRel, TEQI_FT<"teqi", GPR32Opnd, II_TEQI>, TEQI_FM<0xc>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def TGEI : MMRel, TEQI_FT<"tgei", GPR32Opnd, II_TGEI>, TEQI_FM<0x8>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def TGEIU : MMRel, TEQI_FT<"tgeiu", GPR32Opnd, II_TGEIU>, TEQI_FM<0x9>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def TLTI : MMRel, TEQI_FT<"tlti", GPR32Opnd, II_TLTI>, TEQI_FM<0xa>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def TTLTIU : MMRel, TEQI_FT<"tltiu", GPR32Opnd, II_TTLTIU>, TEQI_FM<0xb>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| def TNEI : MMRel, TEQI_FT<"tnei", GPR32Opnd, II_TNEI>, TEQI_FM<0xe>, |
| ISA_MIPS2_NOT_32R6_64R6; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def BREAK : MMRel, StdMMR6Rel, BRK_FT<"break">, BRK_FM<0xd>, ISA_MIPS1; |
| def SYSCALL : MMRel, SYS_FT<"syscall", uimm20, II_SYSCALL>, SYS_FM<0xc>, |
| ISA_MIPS1; |
| def TRAP : TrapBase<BREAK>, ISA_MIPS1; |
| def SDBBP : MMRel, SYS_FT<"sdbbp", uimm20, II_SDBBP>, SDBBP_FM, |
| ISA_MIPS32_NOT_32R6_64R6; |
| |
| def ERET : MMRel, ER_FT<"eret", II_ERET>, ER_FM<0x18, 0x0>, INSN_MIPS3_32; |
| def ERETNC : MMRel, ER_FT<"eretnc", II_ERETNC>, ER_FM<0x18, 0x1>, |
| ISA_MIPS32R5; |
| def DERET : MMRel, ER_FT<"deret", II_DERET>, ER_FM<0x1f, 0x0>, ISA_MIPS32; |
| |
| def EI : MMRel, StdMMR6Rel, DEI_FT<"ei", GPR32Opnd, II_EI>, EI_FM<1>, |
| ISA_MIPS32R2; |
| def DI : MMRel, StdMMR6Rel, DEI_FT<"di", GPR32Opnd, II_DI>, EI_FM<0>, |
| ISA_MIPS32R2; |
| |
| def WAIT : MMRel, StdMMR6Rel, WAIT_FT<"wait">, WAIT_FM, INSN_MIPS3_32; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| /// Load-linked, Store-conditional |
| def LL : LLBase<"ll", GPR32Opnd>, LW_FM<0x30>, PTR_32, ISA_MIPS2_NOT_32R6_64R6; |
| def SC : SCBase<"sc", GPR32Opnd>, LW_FM<0x38>, PTR_32, ISA_MIPS2_NOT_32R6_64R6; |
| } |
| /// Jump and Branch Instructions |
| let AdditionalPredicates = [NotInMicroMips, RelocNotPIC] in |
| def J : MMRel, JumpFJ<jmptarget, "j", br, bb, "j">, FJ<2>, |
| IsBranch, ISA_MIPS1; |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def JR : MMRel, IndirectBranch<"jr", GPR32Opnd>, MTLO_FM<8>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def BEQ : MMRel, CBranch<"beq", brtarget, seteq, GPR32Opnd>, BEQ_FM<4>, |
| ISA_MIPS1; |
| def BEQL : MMRel, CBranchLikely<"beql", brtarget, GPR32Opnd>, |
| BEQ_FM<20>, ISA_MIPS2_NOT_32R6_64R6; |
| def BNE : MMRel, CBranch<"bne", brtarget, setne, GPR32Opnd>, BEQ_FM<5>, |
| ISA_MIPS1; |
| def BNEL : MMRel, CBranchLikely<"bnel", brtarget, GPR32Opnd>, |
| BEQ_FM<21>, ISA_MIPS2_NOT_32R6_64R6; |
| def BGEZ : MMRel, CBranchZero<"bgez", brtarget, setge, GPR32Opnd>, |
| BGEZ_FM<1, 1>, ISA_MIPS1; |
| def BGEZL : MMRel, CBranchZeroLikely<"bgezl", brtarget, GPR32Opnd>, |
| BGEZ_FM<1, 3>, ISA_MIPS2_NOT_32R6_64R6; |
| def BGTZ : MMRel, CBranchZero<"bgtz", brtarget, setgt, GPR32Opnd>, |
| BGEZ_FM<7, 0>, ISA_MIPS1; |
| def BGTZL : MMRel, CBranchZeroLikely<"bgtzl", brtarget, GPR32Opnd>, |
| BGEZ_FM<23, 0>, ISA_MIPS2_NOT_32R6_64R6; |
| def BLEZ : MMRel, CBranchZero<"blez", brtarget, setle, GPR32Opnd>, |
| BGEZ_FM<6, 0>, ISA_MIPS1; |
| def BLEZL : MMRel, CBranchZeroLikely<"blezl", brtarget, GPR32Opnd>, |
| BGEZ_FM<22, 0>, ISA_MIPS2_NOT_32R6_64R6; |
| def BLTZ : MMRel, CBranchZero<"bltz", brtarget, setlt, GPR32Opnd>, |
| BGEZ_FM<1, 0>, ISA_MIPS1; |
| def BLTZL : MMRel, CBranchZeroLikely<"bltzl", brtarget, GPR32Opnd>, |
| BGEZ_FM<1, 2>, ISA_MIPS2_NOT_32R6_64R6; |
| def B : UncondBranch<BEQ, brtarget>, ISA_MIPS1; |
| |
| def JAL : MMRel, JumpLink<"jal", calltarget>, FJ<3>, ISA_MIPS1; |
| |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips, NoIndirectJumpGuards] in { |
| def JALR : JumpLinkReg<"jalr", GPR32Opnd>, JALR_FM, ISA_MIPS1; |
| def JALRPseudo : JumpLinkRegPseudo<GPR32Opnd, JALR, RA>, ISA_MIPS1; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def JALX : MMRel, JumpLink<"jalx", calltarget>, FJ<0x1D>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def BGEZAL : MMRel, BGEZAL_FT<"bgezal", brtarget, GPR32Opnd>, BGEZAL_FM<0x11>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def BGEZALL : MMRel, BGEZAL_FT<"bgezall", brtarget, GPR32Opnd>, |
| BGEZAL_FM<0x13>, ISA_MIPS2_NOT_32R6_64R6; |
| def BLTZAL : MMRel, BGEZAL_FT<"bltzal", brtarget, GPR32Opnd>, BGEZAL_FM<0x10>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def BLTZALL : MMRel, BGEZAL_FT<"bltzall", brtarget, GPR32Opnd>, |
| BGEZAL_FM<0x12>, ISA_MIPS2_NOT_32R6_64R6; |
| def BAL_BR : BAL_BR_Pseudo<BGEZAL, brtarget>, ISA_MIPS1; |
| } |
| let AdditionalPredicates = [NotInMips16Mode, NotInMicroMips] in { |
| def TAILCALL : TailCall<J, jmptarget>, ISA_MIPS1; |
| } |
| let AdditionalPredicates = [NotInMips16Mode, NotInMicroMips, |
| NoIndirectJumpGuards] in |
| def TAILCALLREG : TailCallReg<JR, GPR32Opnd>, ISA_MIPS1_NOT_32R6_64R6; |
| |
| // Indirect branches are matched as PseudoIndirectBranch/PseudoIndirectBranch64 |
| // then are expanded to JR, JR64, JALR, or JALR64 depending on the ISA. |
| class PseudoIndirectBranchBase<Instruction JumpInst, RegisterOperand RO> : |
| MipsPseudo<(outs), (ins RO:$rs), [(brind RO:$rs)], |
| II_IndirectBranchPseudo>, |
| PseudoInstExpansion<(JumpInst RO:$rs)> { |
| let isTerminator=1; |
| let isBarrier=1; |
| let hasDelaySlot = 1; |
| let isBranch = 1; |
| let isIndirectBranch = 1; |
| bit isCTI = 1; |
| } |
| |
| let AdditionalPredicates = [NotInMips16Mode, NotInMicroMips, |
| NoIndirectJumpGuards] in |
| def PseudoIndirectBranch : PseudoIndirectBranchBase<JR, GPR32Opnd>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| |
| // Return instructions are matched as a RetRA instruction, then are expanded |
| // into PseudoReturn/PseudoReturn64 after register allocation. Finally, |
| // MipsAsmPrinter expands this into JR, JR64, JALR, or JALR64 depending on the |
| // ISA. |
| class PseudoReturnBase<RegisterOperand RO> : MipsPseudo<(outs), (ins RO:$rs), |
| [], II_ReturnPseudo> { |
| let isTerminator = 1; |
| let isBarrier = 1; |
| let hasDelaySlot = 1; |
| let isReturn = 1; |
| let isCodeGenOnly = 1; |
| let hasCtrlDep = 1; |
| let hasExtraSrcRegAllocReq = 1; |
| bit isCTI = 1; |
| } |
| |
| def PseudoReturn : PseudoReturnBase<GPR32Opnd>; |
| |
| // Exception handling related node and instructions. |
| // The conversion sequence is: |
| // ISD::EH_RETURN -> MipsISD::EH_RETURN -> |
| // MIPSeh_return -> (stack change + indirect branch) |
| // |
| // MIPSeh_return takes the place of regular return instruction |
| // but takes two arguments (V1, V0) which are used for storing |
| // the offset and return address respectively. |
| def SDT_MipsEHRET : SDTypeProfile<0, 2, [SDTCisInt<0>, SDTCisPtrTy<1>]>; |
| |
| def MIPSehret : SDNode<"MipsISD::EH_RETURN", SDT_MipsEHRET, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| |
| let Uses = [V0, V1], isTerminator = 1, isReturn = 1, |
| isBarrier = 1, isCTI = 1, hasNoSchedulingInfo = 1 in { |
| def MIPSeh_return32 : MipsPseudo<(outs), (ins GPR32:$spoff, GPR32:$dst), |
| [(MIPSehret GPR32:$spoff, GPR32:$dst)]>; |
| def MIPSeh_return64 : MipsPseudo<(outs), (ins GPR64:$spoff, GPR64:$dst), |
| [(MIPSehret GPR64:$spoff, GPR64:$dst)]>; |
| } |
| |
| /// Multiply and Divide Instructions. |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def MULT : MMRel, Mult<"mult", II_MULT, GPR32Opnd, [HI0, LO0]>, |
| MULT_FM<0, 0x18>, ISA_MIPS1_NOT_32R6_64R6; |
| def MULTu : MMRel, Mult<"multu", II_MULTU, GPR32Opnd, [HI0, LO0]>, |
| MULT_FM<0, 0x19>, ISA_MIPS1_NOT_32R6_64R6; |
| def SDIV : MMRel, Div<"div", II_DIV, GPR32Opnd, [HI0, LO0]>, |
| MULT_FM<0, 0x1a>, ISA_MIPS1_NOT_32R6_64R6; |
| def UDIV : MMRel, Div<"divu", II_DIVU, GPR32Opnd, [HI0, LO0]>, |
| MULT_FM<0, 0x1b>, ISA_MIPS1_NOT_32R6_64R6; |
| def MTHI : MMRel, MoveToLOHI<"mthi", GPR32Opnd, [HI0]>, MTLO_FM<0x11>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def MTLO : MMRel, MoveToLOHI<"mtlo", GPR32Opnd, [LO0]>, MTLO_FM<0x13>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def MFHI : MMRel, MoveFromLOHI<"mfhi", GPR32Opnd, AC0>, MFLO_FM<0x10>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def MFLO : MMRel, MoveFromLOHI<"mflo", GPR32Opnd, AC0>, MFLO_FM<0x12>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| |
| /// Sign Ext In Register Instructions. |
| def SEB : MMRel, StdMMR6Rel, SignExtInReg<"seb", i8, GPR32Opnd, II_SEB>, |
| SEB_FM<0x10, 0x20>, ISA_MIPS32R2; |
| def SEH : MMRel, StdMMR6Rel, SignExtInReg<"seh", i16, GPR32Opnd, II_SEH>, |
| SEB_FM<0x18, 0x20>, ISA_MIPS32R2; |
| |
| /// Count Leading |
| def CLZ : MMRel, CountLeading0<"clz", GPR32Opnd, II_CLZ>, CLO_FM<0x20>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def CLO : MMRel, CountLeading1<"clo", GPR32Opnd, II_CLO>, CLO_FM<0x21>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| |
| /// Word Swap Bytes Within Halfwords |
| def WSBH : MMRel, SubwordSwap<"wsbh", GPR32Opnd, II_WSBH>, SEB_FM<2, 0x20>, |
| ISA_MIPS32R2; |
| |
| /// No operation. |
| def NOP : PseudoSE<(outs), (ins), []>, |
| PseudoInstExpansion<(SLL ZERO, ZERO, 0)>, ISA_MIPS1; |
| |
| // FrameIndexes are legalized when they are operands from load/store |
| // instructions. The same not happens for stack address copies, so an |
| // add op with mem ComplexPattern is used and the stack address copy |
| // can be matched. It's similar to Sparc LEA_ADDRi |
| let AdditionalPredicates = [NotInMicroMips] in |
| def LEA_ADDiu : MMRel, EffectiveAddress<"addiu", GPR32Opnd>, LW_FM<9>, |
| ISA_MIPS1; |
| |
| // MADD*/MSUB* |
| def MADD : MMRel, MArithR<"madd", II_MADD, 1>, MULT_FM<0x1c, 0>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def MADDU : MMRel, MArithR<"maddu", II_MADDU, 1>, MULT_FM<0x1c, 1>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def MSUB : MMRel, MArithR<"msub", II_MSUB>, MULT_FM<0x1c, 4>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def MSUBU : MMRel, MArithR<"msubu", II_MSUBU>, MULT_FM<0x1c, 5>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| } |
| |
| let AdditionalPredicates = [NotDSP] in { |
| def PseudoMULT : MultDivPseudo<MULT, ACC64, GPR32Opnd, MipsMult, II_MULT>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoMULTu : MultDivPseudo<MULTu, ACC64, GPR32Opnd, MipsMultu, II_MULTU>, |
| ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoMFHI : PseudoMFLOHI<GPR32, ACC64, MipsMFHI>, ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoMFLO : PseudoMFLOHI<GPR32, ACC64, MipsMFLO>, ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoMTLOHI : PseudoMTLOHI<ACC64, GPR32>, ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoMADD : MAddSubPseudo<MADD, MipsMAdd, II_MADD>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def PseudoMADDU : MAddSubPseudo<MADDU, MipsMAddu, II_MADDU>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def PseudoMSUB : MAddSubPseudo<MSUB, MipsMSub, II_MSUB>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| def PseudoMSUBU : MAddSubPseudo<MSUBU, MipsMSubu, II_MSUBU>, |
| ISA_MIPS32_NOT_32R6_64R6; |
| } |
| |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def PseudoSDIV : MultDivPseudo<SDIV, ACC64, GPR32Opnd, MipsDivRem, II_DIV, |
| 0, 1, 1>, ISA_MIPS1_NOT_32R6_64R6; |
| def PseudoUDIV : MultDivPseudo<UDIV, ACC64, GPR32Opnd, MipsDivRemU, II_DIVU, |
| 0, 1, 1>, ISA_MIPS1_NOT_32R6_64R6; |
| def RDHWR : MMRel, ReadHardware<GPR32Opnd, HWRegsOpnd>, RDHWR_FM, ISA_MIPS1; |
| // TODO: Add '0 < pos+size <= 32' constraint check to ext instruction |
| def EXT : MMRel, StdMMR6Rel, ExtBase<"ext", GPR32Opnd, uimm5, uimm5_plus1, |
| immZExt5, immZExt5Plus1, MipsExt>, |
| EXT_FM<0>, ISA_MIPS32R2; |
| def INS : MMRel, StdMMR6Rel, InsBase<"ins", GPR32Opnd, uimm5, |
| uimm5_inssize_plus1, immZExt5, |
| immZExt5Plus1>, |
| EXT_FM<4>, ISA_MIPS32R2; |
| } |
| /// Move Control Registers From/To CPU Registers |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def MTC0 : MTC3OP<"mtc0", COP0Opnd, GPR32Opnd, II_MTC0>, |
| MFC3OP_FM<0x10, 4, 0>, ISA_MIPS1; |
| def MFC0 : MFC3OP<"mfc0", GPR32Opnd, COP0Opnd, II_MFC0>, |
| MFC3OP_FM<0x10, 0, 0>, ISA_MIPS1; |
| def MFC2 : MFC3OP<"mfc2", GPR32Opnd, COP2Opnd, II_MFC2>, |
| MFC3OP_FM<0x12, 0, 0>, ISA_MIPS1; |
| def MTC2 : MTC3OP<"mtc2", COP2Opnd, GPR32Opnd, II_MTC2>, |
| MFC3OP_FM<0x12, 4, 0>, ISA_MIPS1; |
| } |
| |
| class Barrier<string asmstr, InstrItinClass itin = NoItinerary> : |
| InstSE<(outs), (ins), asmstr, [], itin, FrmOther, asmstr>; |
| let AdditionalPredicates = [NotInMicroMips] in { |
| def SSNOP : MMRel, StdMMR6Rel, Barrier<"ssnop", II_SSNOP>, BARRIER_FM<1>, |
| ISA_MIPS1; |
| def EHB : MMRel, Barrier<"ehb", II_EHB>, BARRIER_FM<3>, ISA_MIPS1; |
| |
| let isCTI = 1 in |
| def PAUSE : MMRel, StdMMR6Rel, Barrier<"pause", II_PAUSE>, BARRIER_FM<5>, |
| ISA_MIPS32R2; |
| } |
| |
| // JR_HB and JALR_HB are defined here using the new style naming |
| // scheme because some of this code is shared with Mips32r6InstrInfo.td |
| // and because of that it doesn't follow the naming convention of the |
| // rest of the file. To avoid a mixture of old vs new style, the new |
| // style was chosen. |
| class JR_HB_DESC_BASE<string instr_asm, RegisterOperand GPROpnd> { |
| dag OutOperandList = (outs); |
| dag InOperandList = (ins GPROpnd:$rs); |
| string AsmString = !strconcat(instr_asm, "\t$rs"); |
| list<dag> Pattern = []; |
| } |
| |
| class JALR_HB_DESC_BASE<string instr_asm, RegisterOperand GPROpnd> { |
| dag OutOperandList = (outs GPROpnd:$rd); |
| dag InOperandList = (ins GPROpnd:$rs); |
| string AsmString = !strconcat(instr_asm, "\t$rd, $rs"); |
| list<dag> Pattern = []; |
| } |
| |
| class JR_HB_DESC<RegisterOperand RO> : |
| InstSE<(outs), (ins), "", [], II_JR_HB, FrmJ>, JR_HB_DESC_BASE<"jr.hb", RO> { |
| |