| // Copyright (c) 2017 The Khronos Group Inc. | |
| // Copyright (c) 2017 Valve Corporation | |
| // Copyright (c) 2017 LunarG Inc. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "source/opt/inline_pass.h" | |
| #include <unordered_set> | |
| #include <utility> | |
| #include "source/cfa.h" | |
| #include "source/opt/reflect.h" | |
| #include "source/util/make_unique.h" | |
| namespace spvtools { | |
| namespace opt { | |
| namespace { | |
| // Indices of operands in SPIR-V instructions | |
| constexpr int kSpvFunctionCallFunctionId = 2; | |
| constexpr int kSpvFunctionCallArgumentId = 3; | |
| constexpr int kSpvReturnValueId = 0; | |
| constexpr int kSpvDebugDeclareVarInIdx = 3; | |
| constexpr int kSpvAccessChainBaseInIdx = 0; | |
| } // namespace | |
| uint32_t InlinePass::AddPointerToType(uint32_t type_id, | |
| spv::StorageClass storage_class) { | |
| uint32_t resultId = context()->TakeNextId(); | |
| if (resultId == 0) { | |
| return resultId; | |
| } | |
| std::unique_ptr<Instruction> type_inst( | |
| new Instruction(context(), spv::Op::OpTypePointer, 0, resultId, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_STORAGE_CLASS, | |
| {uint32_t(storage_class)}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, {type_id}}})); | |
| context()->AddType(std::move(type_inst)); | |
| analysis::Type* pointeeTy; | |
| std::unique_ptr<analysis::Pointer> pointerTy; | |
| std::tie(pointeeTy, pointerTy) = | |
| context()->get_type_mgr()->GetTypeAndPointerType( | |
| type_id, spv::StorageClass::Function); | |
| context()->get_type_mgr()->RegisterType(resultId, *pointerTy); | |
| return resultId; | |
| } | |
| void InlinePass::AddBranch(uint32_t label_id, | |
| std::unique_ptr<BasicBlock>* block_ptr) { | |
| std::unique_ptr<Instruction> newBranch( | |
| new Instruction(context(), spv::Op::OpBranch, 0, 0, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {label_id}}})); | |
| (*block_ptr)->AddInstruction(std::move(newBranch)); | |
| } | |
| void InlinePass::AddBranchCond(uint32_t cond_id, uint32_t true_id, | |
| uint32_t false_id, | |
| std::unique_ptr<BasicBlock>* block_ptr) { | |
| std::unique_ptr<Instruction> newBranch( | |
| new Instruction(context(), spv::Op::OpBranchConditional, 0, 0, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {cond_id}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, {true_id}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, {false_id}}})); | |
| (*block_ptr)->AddInstruction(std::move(newBranch)); | |
| } | |
| void InlinePass::AddLoopMerge(uint32_t merge_id, uint32_t continue_id, | |
| std::unique_ptr<BasicBlock>* block_ptr) { | |
| std::unique_ptr<Instruction> newLoopMerge(new Instruction( | |
| context(), spv::Op::OpLoopMerge, 0, 0, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {merge_id}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, {continue_id}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_LOOP_CONTROL, {0}}})); | |
| (*block_ptr)->AddInstruction(std::move(newLoopMerge)); | |
| } | |
| void InlinePass::AddStore(uint32_t ptr_id, uint32_t val_id, | |
| std::unique_ptr<BasicBlock>* block_ptr, | |
| const Instruction* line_inst, | |
| const DebugScope& dbg_scope) { | |
| std::unique_ptr<Instruction> newStore( | |
| new Instruction(context(), spv::Op::OpStore, 0, 0, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {ptr_id}}, | |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, {val_id}}})); | |
| if (line_inst != nullptr) { | |
| newStore->AddDebugLine(line_inst); | |
| } | |
| newStore->SetDebugScope(dbg_scope); | |
| (*block_ptr)->AddInstruction(std::move(newStore)); | |
| } | |
| void InlinePass::AddLoad(uint32_t type_id, uint32_t resultId, uint32_t ptr_id, | |
| std::unique_ptr<BasicBlock>* block_ptr, | |
| const Instruction* line_inst, | |
| const DebugScope& dbg_scope) { | |
| std::unique_ptr<Instruction> newLoad( | |
| new Instruction(context(), spv::Op::OpLoad, type_id, resultId, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_ID, {ptr_id}}})); | |
| if (line_inst != nullptr) { | |
| newLoad->AddDebugLine(line_inst); | |
| } | |
| newLoad->SetDebugScope(dbg_scope); | |
| (*block_ptr)->AddInstruction(std::move(newLoad)); | |
| } | |
| std::unique_ptr<Instruction> InlinePass::NewLabel(uint32_t label_id) { | |
| std::unique_ptr<Instruction> newLabel( | |
| new Instruction(context(), spv::Op::OpLabel, 0, label_id, {})); | |
| return newLabel; | |
| } | |
| uint32_t InlinePass::GetFalseId() { | |
| if (false_id_ != 0) return false_id_; | |
| false_id_ = get_module()->GetGlobalValue(spv::Op::OpConstantFalse); | |
| if (false_id_ != 0) return false_id_; | |
| uint32_t boolId = get_module()->GetGlobalValue(spv::Op::OpTypeBool); | |
| if (boolId == 0) { | |
| boolId = context()->TakeNextId(); | |
| if (boolId == 0) { | |
| return 0; | |
| } | |
| get_module()->AddGlobalValue(spv::Op::OpTypeBool, boolId, 0); | |
| } | |
| false_id_ = context()->TakeNextId(); | |
| if (false_id_ == 0) { | |
| return 0; | |
| } | |
| get_module()->AddGlobalValue(spv::Op::OpConstantFalse, false_id_, boolId); | |
| return false_id_; | |
| } | |
| void InlinePass::MapParams( | |
| Function* calleeFn, BasicBlock::iterator call_inst_itr, | |
| std::unordered_map<uint32_t, uint32_t>* callee2caller) { | |
| int param_idx = 0; | |
| calleeFn->ForEachParam( | |
| [&call_inst_itr, ¶m_idx, &callee2caller](const Instruction* cpi) { | |
| const uint32_t pid = cpi->result_id(); | |
| (*callee2caller)[pid] = call_inst_itr->GetSingleWordOperand( | |
| kSpvFunctionCallArgumentId + param_idx); | |
| ++param_idx; | |
| }); | |
| } | |
| bool InlinePass::CloneAndMapLocals( | |
| Function* calleeFn, std::vector<std::unique_ptr<Instruction>>* new_vars, | |
| std::unordered_map<uint32_t, uint32_t>* callee2caller, | |
| analysis::DebugInlinedAtContext* inlined_at_ctx) { | |
| auto callee_block_itr = calleeFn->begin(); | |
| auto callee_var_itr = callee_block_itr->begin(); | |
| while (callee_var_itr->opcode() == spv::Op::OpVariable || | |
| callee_var_itr->GetCommonDebugOpcode() == | |
| CommonDebugInfoDebugDeclare) { | |
| if (callee_var_itr->opcode() != spv::Op::OpVariable) { | |
| ++callee_var_itr; | |
| continue; | |
| } | |
| std::unique_ptr<Instruction> var_inst(callee_var_itr->Clone(context())); | |
| uint32_t newId = context()->TakeNextId(); | |
| if (newId == 0) { | |
| return false; | |
| } | |
| get_decoration_mgr()->CloneDecorations(callee_var_itr->result_id(), newId); | |
| var_inst->SetResultId(newId); | |
| var_inst->UpdateDebugInlinedAt( | |
| context()->get_debug_info_mgr()->BuildDebugInlinedAtChain( | |
| callee_var_itr->GetDebugInlinedAt(), inlined_at_ctx)); | |
| (*callee2caller)[callee_var_itr->result_id()] = newId; | |
| new_vars->push_back(std::move(var_inst)); | |
| ++callee_var_itr; | |
| } | |
| return true; | |
| } | |
| uint32_t InlinePass::CreateReturnVar( | |
| Function* calleeFn, std::vector<std::unique_ptr<Instruction>>* new_vars) { | |
| uint32_t returnVarId = 0; | |
| const uint32_t calleeTypeId = calleeFn->type_id(); | |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); | |
| assert(type_mgr->GetType(calleeTypeId)->AsVoid() == nullptr && | |
| "Cannot create a return variable of type void."); | |
| // Find or create ptr to callee return type. | |
| uint32_t returnVarTypeId = | |
| type_mgr->FindPointerToType(calleeTypeId, spv::StorageClass::Function); | |
| if (returnVarTypeId == 0) { | |
| returnVarTypeId = | |
| AddPointerToType(calleeTypeId, spv::StorageClass::Function); | |
| if (returnVarTypeId == 0) { | |
| return 0; | |
| } | |
| } | |
| // Add return var to new function scope variables. | |
| returnVarId = context()->TakeNextId(); | |
| if (returnVarId == 0) { | |
| return 0; | |
| } | |
| std::unique_ptr<Instruction> var_inst(new Instruction( | |
| context(), spv::Op::OpVariable, returnVarTypeId, returnVarId, | |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_STORAGE_CLASS, | |
| {(uint32_t)spv::StorageClass::Function}}})); | |
| new_vars->push_back(std::move(var_inst)); | |
| get_decoration_mgr()->CloneDecorations(calleeFn->result_id(), returnVarId); | |
| // Decorate the return var with AliasedPointer if the storage class of the | |
| // pointee type is PhysicalStorageBuffer. | |
| auto const pointee_type = | |
| type_mgr->GetType(returnVarTypeId)->AsPointer()->pointee_type(); | |
| if (pointee_type->AsPointer() != nullptr) { | |
| if (pointee_type->AsPointer()->storage_class() == | |
| spv::StorageClass::PhysicalStorageBuffer) { | |
| get_decoration_mgr()->AddDecoration( | |
| returnVarId, uint32_t(spv::Decoration::AliasedPointer)); | |
| } | |
| } | |
| return returnVarId; | |
| } | |
| bool InlinePass::IsSameBlockOp(const Instruction* inst) const { | |
| return inst->opcode() == spv::Op::OpSampledImage || | |
| inst->opcode() == spv::Op::OpImage; | |
| } | |
| bool InlinePass::CloneSameBlockOps( | |
| std::unique_ptr<Instruction>* inst, | |
| std::unordered_map<uint32_t, uint32_t>* postCallSB, | |
| std::unordered_map<uint32_t, Instruction*>* preCallSB, | |
| std::unique_ptr<BasicBlock>* block_ptr) { | |
| return (*inst)->WhileEachInId([&postCallSB, &preCallSB, &block_ptr, | |
| this](uint32_t* iid) { | |
| const auto mapItr = (*postCallSB).find(*iid); | |
| if (mapItr == (*postCallSB).end()) { | |
| const auto mapItr2 = (*preCallSB).find(*iid); | |
| if (mapItr2 != (*preCallSB).end()) { | |
| // Clone pre-call same-block ops, map result id. | |
| const Instruction* inInst = mapItr2->second; | |
| std::unique_ptr<Instruction> sb_inst(inInst->Clone(context())); | |
| if (!CloneSameBlockOps(&sb_inst, postCallSB, preCallSB, block_ptr)) { | |
| return false; | |
| } | |
| const uint32_t rid = sb_inst->result_id(); | |
| const uint32_t nid = context()->TakeNextId(); | |
| if (nid == 0) { | |
| return false; | |
| } | |
| get_decoration_mgr()->CloneDecorations(rid, nid); | |
| sb_inst->SetResultId(nid); | |
| (*postCallSB)[rid] = nid; | |
| *iid = nid; | |
| (*block_ptr)->AddInstruction(std::move(sb_inst)); | |
| } | |
| } else { | |
| // Reset same-block op operand. | |
| *iid = mapItr->second; | |
| } | |
| return true; | |
| }); | |
| } | |
| void InlinePass::MoveInstsBeforeEntryBlock( | |
| std::unordered_map<uint32_t, Instruction*>* preCallSB, | |
| BasicBlock* new_blk_ptr, BasicBlock::iterator call_inst_itr, | |
| UptrVectorIterator<BasicBlock> call_block_itr) { | |
| for (auto cii = call_block_itr->begin(); cii != call_inst_itr; | |
| cii = call_block_itr->begin()) { | |
| Instruction* inst = &*cii; | |
| inst->RemoveFromList(); | |
| std::unique_ptr<Instruction> cp_inst(inst); | |
| // Remember same-block ops for possible regeneration. | |
| if (IsSameBlockOp(&*cp_inst)) { | |
| auto* sb_inst_ptr = cp_inst.get(); | |
| (*preCallSB)[cp_inst->result_id()] = sb_inst_ptr; | |
| } | |
| new_blk_ptr->AddInstruction(std::move(cp_inst)); | |
| } | |
| } | |
| std::unique_ptr<BasicBlock> InlinePass::AddGuardBlock( | |
| std::vector<std::unique_ptr<BasicBlock>>* new_blocks, | |
| std::unordered_map<uint32_t, uint32_t>* callee2caller, | |
| std::unique_ptr<BasicBlock> new_blk_ptr, uint32_t entry_blk_label_id) { | |
| const auto guard_block_id = context()->TakeNextId(); | |
| if (guard_block_id == 0) { | |
| return nullptr; | |
| } | |
| AddBranch(guard_block_id, &new_blk_ptr); | |
| new_blocks->push_back(std::move(new_blk_ptr)); | |
| // Start the next block. | |
| new_blk_ptr = MakeUnique<BasicBlock>(NewLabel(guard_block_id)); | |
| // Reset the mapping of the callee's entry block to point to | |
| // the guard block. Do this so we can fix up phis later on to | |
| // satisfy dominance. | |
| (*callee2caller)[entry_blk_label_id] = guard_block_id; | |
| return new_blk_ptr; | |
| } | |
| InstructionList::iterator InlinePass::AddStoresForVariableInitializers( | |
| const std::unordered_map<uint32_t, uint32_t>& callee2caller, | |
| analysis::DebugInlinedAtContext* inlined_at_ctx, | |
| std::unique_ptr<BasicBlock>* new_blk_ptr, | |
| UptrVectorIterator<BasicBlock> callee_first_block_itr) { | |
| auto callee_itr = callee_first_block_itr->begin(); | |
| while (callee_itr->opcode() == spv::Op::OpVariable || | |
| callee_itr->GetCommonDebugOpcode() == CommonDebugInfoDebugDeclare) { | |
| if (callee_itr->opcode() == spv::Op::OpVariable && | |
| callee_itr->NumInOperands() == 2) { | |
| assert(callee2caller.count(callee_itr->result_id()) && | |
| "Expected the variable to have already been mapped."); | |
| uint32_t new_var_id = callee2caller.at(callee_itr->result_id()); | |
| // The initializer must be a constant or global value. No mapped | |
| // should be used. | |
| uint32_t val_id = callee_itr->GetSingleWordInOperand(1); | |
| AddStore(new_var_id, val_id, new_blk_ptr, callee_itr->dbg_line_inst(), | |
| context()->get_debug_info_mgr()->BuildDebugScope( | |
| callee_itr->GetDebugScope(), inlined_at_ctx)); | |
| } | |
| if (callee_itr->GetCommonDebugOpcode() == CommonDebugInfoDebugDeclare) { | |
| InlineSingleInstruction( | |
| callee2caller, new_blk_ptr->get(), &*callee_itr, | |
| context()->get_debug_info_mgr()->BuildDebugInlinedAtChain( | |
| callee_itr->GetDebugScope().GetInlinedAt(), inlined_at_ctx)); | |
| } | |
| ++callee_itr; | |
| } | |
| return callee_itr; | |
| } | |
| bool InlinePass::InlineSingleInstruction( | |
| const std::unordered_map<uint32_t, uint32_t>& callee2caller, | |
| BasicBlock* new_blk_ptr, const Instruction* inst, uint32_t dbg_inlined_at) { | |
| // If we have return, it must be at the end of the callee. We will handle | |
| // it at the end. | |
| if (inst->opcode() == spv::Op::OpReturnValue || | |
| inst->opcode() == spv::Op::OpReturn) | |
| return true; | |
| // Copy callee instruction and remap all input Ids. | |
| std::unique_ptr<Instruction> cp_inst(inst->Clone(context())); | |
| cp_inst->ForEachInId([&callee2caller](uint32_t* iid) { | |
| const auto mapItr = callee2caller.find(*iid); | |
| if (mapItr != callee2caller.end()) { | |
| *iid = mapItr->second; | |
| } | |
| }); | |
| // If result id is non-zero, remap it. | |
| const uint32_t rid = cp_inst->result_id(); | |
| if (rid != 0) { | |
| const auto mapItr = callee2caller.find(rid); | |
| if (mapItr == callee2caller.end()) { | |
| return false; | |
| } | |
| uint32_t nid = mapItr->second; | |
| cp_inst->SetResultId(nid); | |
| get_decoration_mgr()->CloneDecorations(rid, nid); | |
| } | |
| cp_inst->UpdateDebugInlinedAt(dbg_inlined_at); | |
| new_blk_ptr->AddInstruction(std::move(cp_inst)); | |
| return true; | |
| } | |
| std::unique_ptr<BasicBlock> InlinePass::InlineReturn( | |
| const std::unordered_map<uint32_t, uint32_t>& callee2caller, | |
| std::vector<std::unique_ptr<BasicBlock>>* new_blocks, | |
| std::unique_ptr<BasicBlock> new_blk_ptr, | |
| analysis::DebugInlinedAtContext* inlined_at_ctx, Function* calleeFn, | |
| const Instruction* inst, uint32_t returnVarId) { | |
| // Store return value to return variable. | |
| if (inst->opcode() == spv::Op::OpReturnValue) { | |
| assert(returnVarId != 0); | |
| uint32_t valId = inst->GetInOperand(kSpvReturnValueId).words[0]; | |
| const auto mapItr = callee2caller.find(valId); | |
| if (mapItr != callee2caller.end()) { | |
| valId = mapItr->second; | |
| } | |
| AddStore(returnVarId, valId, &new_blk_ptr, inst->dbg_line_inst(), | |
| context()->get_debug_info_mgr()->BuildDebugScope( | |
| inst->GetDebugScope(), inlined_at_ctx)); | |
| } | |
| uint32_t returnLabelId = 0; | |
| for (auto callee_block_itr = calleeFn->begin(); | |
| callee_block_itr != calleeFn->end(); ++callee_block_itr) { | |
| if (spvOpcodeIsAbort(callee_block_itr->tail()->opcode())) { | |
| returnLabelId = context()->TakeNextId(); | |
| break; | |
| } | |
| } | |
| if (returnLabelId == 0) return new_blk_ptr; | |
| if (inst->opcode() == spv::Op::OpReturn || | |
| inst->opcode() == spv::Op::OpReturnValue) | |
| AddBranch(returnLabelId, &new_blk_ptr); | |
| new_blocks->push_back(std::move(new_blk_ptr)); | |
| return MakeUnique<BasicBlock>(NewLabel(returnLabelId)); | |
| } | |
| bool InlinePass::InlineEntryBlock( | |
| const std::unordered_map<uint32_t, uint32_t>& callee2caller, | |
| std::unique_ptr<BasicBlock>* new_blk_ptr, | |
| UptrVectorIterator<BasicBlock> callee_first_block, | |
| analysis::DebugInlinedAtContext* inlined_at_ctx) { | |
| auto callee_inst_itr = AddStoresForVariableInitializers( | |
| callee2caller, inlined_at_ctx, new_blk_ptr, callee_first_block); | |
| while (callee_inst_itr != callee_first_block->end()) { | |
| // Don't inline function definition links, the calling function is not a | |
| // definition. | |
| if (callee_inst_itr->GetShader100DebugOpcode() == | |
| NonSemanticShaderDebugInfo100DebugFunctionDefinition) { | |
| ++callee_inst_itr; | |
| continue; | |
| } | |
| if (!InlineSingleInstruction( | |
| callee2caller, new_blk_ptr->get(), &*callee_inst_itr, | |
| context()->get_debug_info_mgr()->BuildDebugInlinedAtChain( | |
| callee_inst_itr->GetDebugScope().GetInlinedAt(), | |
| inlined_at_ctx))) { | |
| return false; | |
| } | |
| ++callee_inst_itr; | |
| } | |
| return true; | |
| } | |
| std::unique_ptr<BasicBlock> InlinePass::InlineBasicBlocks( | |
| std::vector<std::unique_ptr<BasicBlock>>* new_blocks, | |
| const std::unordered_map<uint32_t, uint32_t>& callee2caller, | |
| std::unique_ptr<BasicBlock> new_blk_ptr, | |
| analysis::DebugInlinedAtContext* inlined_at_ctx, Function* calleeFn) { | |
| auto callee_block_itr = calleeFn->begin(); | |
| ++callee_block_itr; | |
| while (callee_block_itr != calleeFn->end()) { | |
| new_blocks->push_back(std::move(new_blk_ptr)); | |
| const auto mapItr = | |
| callee2caller.find(callee_block_itr->GetLabelInst()->result_id()); | |
| if (mapItr == callee2caller.end()) return nullptr; | |
| new_blk_ptr = MakeUnique<BasicBlock>(NewLabel(mapItr->second)); | |
| auto tail_inst_itr = callee_block_itr->end(); | |
| for (auto inst_itr = callee_block_itr->begin(); inst_itr != tail_inst_itr; | |
| ++inst_itr) { | |
| // Don't inline function definition links, the calling function is not a | |
| // definition | |
| if (inst_itr->GetShader100DebugOpcode() == | |
| NonSemanticShaderDebugInfo100DebugFunctionDefinition) | |
| continue; | |
| if (!InlineSingleInstruction( | |
| callee2caller, new_blk_ptr.get(), &*inst_itr, | |
| context()->get_debug_info_mgr()->BuildDebugInlinedAtChain( | |
| inst_itr->GetDebugScope().GetInlinedAt(), inlined_at_ctx))) { | |
| return nullptr; | |
| } | |
| } | |
| ++callee_block_itr; | |
| } | |
| return new_blk_ptr; | |
| } | |
| bool InlinePass::MoveCallerInstsAfterFunctionCall( | |
| std::unordered_map<uint32_t, Instruction*>* preCallSB, | |
| std::unordered_map<uint32_t, uint32_t>* postCallSB, | |
| std::unique_ptr<BasicBlock>* new_blk_ptr, | |
| BasicBlock::iterator call_inst_itr, bool multiBlocks) { | |
| // Copy remaining instructions from caller block. | |
| for (Instruction* inst = call_inst_itr->NextNode(); inst; | |
| inst = call_inst_itr->NextNode()) { | |
| inst->RemoveFromList(); | |
| std::unique_ptr<Instruction> cp_inst(inst); | |
| // If multiple blocks generated, regenerate any same-block | |
| // instruction that has not been seen in this last block. | |
| if (multiBlocks) { | |
| if (!CloneSameBlockOps(&cp_inst, postCallSB, preCallSB, new_blk_ptr)) { | |
| return false; | |
| } | |
| // Remember same-block ops in this block. | |
| if (IsSameBlockOp(&*cp_inst)) { | |
| const uint32_t rid = cp_inst->result_id(); | |
| (*postCallSB)[rid] = rid; | |
| } | |
| } | |
| new_blk_ptr->get()->AddInstruction(std::move(cp_inst)); | |
| } | |
| return true; | |
| } | |
| void InlinePass::MoveLoopMergeInstToFirstBlock( | |
| std::vector<std::unique_ptr<BasicBlock>>* new_blocks) { | |
| // Move the OpLoopMerge from the last block back to the first, where | |
| // it belongs. | |
| auto& first = new_blocks->front(); | |
| auto& last = new_blocks->back(); | |
| assert(first != last); | |
| // Insert a modified copy of the loop merge into the first block. | |
| auto loop_merge_itr = last->tail(); | |
| --loop_merge_itr; | |
| assert(loop_merge_itr->opcode() == spv::Op::OpLoopMerge); | |
| std::unique_ptr<Instruction> cp_inst(loop_merge_itr->Clone(context())); | |
| first->tail().InsertBefore(std::move(cp_inst)); | |
| // Remove the loop merge from the last block. | |
| loop_merge_itr->RemoveFromList(); | |
| delete &*loop_merge_itr; | |
| } | |
| void InlinePass::UpdateSingleBlockLoopContinueTarget( | |
| uint32_t new_id, std::vector<std::unique_ptr<BasicBlock>>* new_blocks) { | |
| auto& header = new_blocks->front(); | |
| auto* merge_inst = header->GetLoopMergeInst(); | |
| // The back-edge block is split at the branch to create a new back-edge | |
| // block. The old block is modified to branch to the new block. The loop | |
| // merge instruction is updated to declare the new block as the continue | |
| // target. This has the effect of changing the loop from being a large | |
| // continue construct and an empty loop construct to being a loop with a loop | |
| // construct and a trivial continue construct. This change is made to satisfy | |
| // structural dominance. | |
| // Add the new basic block. | |
| std::unique_ptr<BasicBlock> new_block = | |
| MakeUnique<BasicBlock>(NewLabel(new_id)); | |
| auto& old_backedge = new_blocks->back(); | |
| auto old_branch = old_backedge->tail(); | |
| // Move the old back edge into the new block. | |
| std::unique_ptr<Instruction> br(&*old_branch); | |
| new_block->AddInstruction(std::move(br)); | |
| // Add a branch to the new block from the old back-edge block. | |
| AddBranch(new_id, &old_backedge); | |
| new_blocks->push_back(std::move(new_block)); | |
| // Update the loop's continue target to the new block. | |
| merge_inst->SetInOperand(1u, {new_id}); | |
| } | |
| bool InlinePass::GenInlineCode( | |
| std::vector<std::unique_ptr<BasicBlock>>* new_blocks, | |
| std::vector<std::unique_ptr<Instruction>>* new_vars, | |
| BasicBlock::iterator call_inst_itr, | |
| UptrVectorIterator<BasicBlock> call_block_itr) { | |
| // Map from all ids in the callee to their equivalent id in the caller | |
| // as callee instructions are copied into caller. | |
| std::unordered_map<uint32_t, uint32_t> callee2caller; | |
| // Pre-call same-block insts | |
| std::unordered_map<uint32_t, Instruction*> preCallSB; | |
| // Post-call same-block op ids | |
| std::unordered_map<uint32_t, uint32_t> postCallSB; | |
| analysis::DebugInlinedAtContext inlined_at_ctx(&*call_inst_itr); | |
| // Invalidate the def-use chains. They are not kept up to date while | |
| // inlining. However, certain calls try to keep them up-to-date if they are | |
| // valid. These operations can fail. | |
| context()->InvalidateAnalyses(IRContext::kAnalysisDefUse); | |
| // If the caller is a loop header and the callee has multiple blocks, then the | |
| // normal inlining logic will place the OpLoopMerge in the last of several | |
| // blocks in the loop. Instead, it should be placed at the end of the first | |
| // block. We'll wait to move the OpLoopMerge until the end of the regular | |
| // inlining logic, and only if necessary. | |
| bool caller_is_loop_header = call_block_itr->GetLoopMergeInst() != nullptr; | |
| // Single-trip loop continue block | |
| std::unique_ptr<BasicBlock> single_trip_loop_cont_blk; | |
| Function* calleeFn = id2function_[call_inst_itr->GetSingleWordOperand( | |
| kSpvFunctionCallFunctionId)]; | |
| // Map parameters to actual arguments. | |
| MapParams(calleeFn, call_inst_itr, &callee2caller); | |
| // Define caller local variables for all callee variables and create map to | |
| // them. | |
| if (!CloneAndMapLocals(calleeFn, new_vars, &callee2caller, &inlined_at_ctx)) { | |
| return false; | |
| } | |
| // First block needs to use label of original block | |
| // but map callee label in case of phi reference. | |
| uint32_t entry_blk_label_id = calleeFn->begin()->GetLabelInst()->result_id(); | |
| callee2caller[entry_blk_label_id] = call_block_itr->id(); | |
| std::unique_ptr<BasicBlock> new_blk_ptr = | |
| MakeUnique<BasicBlock>(NewLabel(call_block_itr->id())); | |
| // Move instructions of original caller block up to call instruction. | |
| MoveInstsBeforeEntryBlock(&preCallSB, new_blk_ptr.get(), call_inst_itr, | |
| call_block_itr); | |
| if (caller_is_loop_header && | |
| (*(calleeFn->begin())).GetMergeInst() != nullptr) { | |
| // We can't place both the caller's merge instruction and | |
| // another merge instruction in the same block. So split the | |
| // calling block. Insert an unconditional branch to a new guard | |
| // block. Later, once we know the ID of the last block, we | |
| // will move the caller's OpLoopMerge from the last generated | |
| // block into the first block. We also wait to avoid | |
| // invalidating various iterators. | |
| new_blk_ptr = AddGuardBlock(new_blocks, &callee2caller, | |
| std::move(new_blk_ptr), entry_blk_label_id); | |
| if (new_blk_ptr == nullptr) return false; | |
| } | |
| // Create return var if needed. | |
| const uint32_t calleeTypeId = calleeFn->type_id(); | |
| uint32_t returnVarId = 0; | |
| analysis::Type* calleeType = context()->get_type_mgr()->GetType(calleeTypeId); | |
| if (calleeType->AsVoid() == nullptr) { | |
| returnVarId = CreateReturnVar(calleeFn, new_vars); | |
| if (returnVarId == 0) { | |
| return false; | |
| } | |
| } | |
| calleeFn->WhileEachInst([&callee2caller, this](const Instruction* cpi) { | |
| // Create set of callee result ids. Used to detect forward references | |
| const uint32_t rid = cpi->result_id(); | |
| if (rid != 0 && callee2caller.find(rid) == callee2caller.end()) { | |
| const uint32_t nid = context()->TakeNextId(); | |
| if (nid == 0) return false; | |
| callee2caller[rid] = nid; | |
| } | |
| return true; | |
| }); | |
| // Inline DebugClare instructions in the callee's header. | |
| calleeFn->ForEachDebugInstructionsInHeader( | |
| [&new_blk_ptr, &callee2caller, &inlined_at_ctx, this](Instruction* inst) { | |
| InlineSingleInstruction( | |
| callee2caller, new_blk_ptr.get(), inst, | |
| context()->get_debug_info_mgr()->BuildDebugInlinedAtChain( | |
| inst->GetDebugScope().GetInlinedAt(), &inlined_at_ctx)); | |
| }); | |
| // Inline the entry block of the callee function. | |
| if (!InlineEntryBlock(callee2caller, &new_blk_ptr, calleeFn->begin(), | |
| &inlined_at_ctx)) { | |
| return false; | |
| } | |
| // Inline blocks of the callee function other than the entry block. | |
| new_blk_ptr = | |
| InlineBasicBlocks(new_blocks, callee2caller, std::move(new_blk_ptr), | |
| &inlined_at_ctx, calleeFn); | |
| if (new_blk_ptr == nullptr) return false; | |
| new_blk_ptr = InlineReturn(callee2caller, new_blocks, std::move(new_blk_ptr), | |
| &inlined_at_ctx, calleeFn, | |
| &*(calleeFn->tail()->tail()), returnVarId); | |
| // Load return value into result id of call, if it exists. | |
| if (returnVarId != 0) { | |
| const uint32_t resId = call_inst_itr->result_id(); | |
| assert(resId != 0); | |
| AddLoad(calleeTypeId, resId, returnVarId, &new_blk_ptr, | |
| call_inst_itr->dbg_line_inst(), call_inst_itr->GetDebugScope()); | |
| } | |
| // Move instructions of original caller block after call instruction. | |
| if (!MoveCallerInstsAfterFunctionCall(&preCallSB, &postCallSB, &new_blk_ptr, | |
| call_inst_itr, | |
| calleeFn->begin() != calleeFn->end())) | |
| return false; | |
| // Finalize inline code. | |
| new_blocks->push_back(std::move(new_blk_ptr)); | |
| if (caller_is_loop_header && (new_blocks->size() > 1)) { | |
| MoveLoopMergeInstToFirstBlock(new_blocks); | |
| // If the loop was a single basic block previously, update it's structure. | |
| auto& header = new_blocks->front(); | |
| auto* merge_inst = header->GetLoopMergeInst(); | |
| if (merge_inst->GetSingleWordInOperand(1u) == header->id()) { | |
| auto new_id = context()->TakeNextId(); | |
| if (new_id == 0) return false; | |
| UpdateSingleBlockLoopContinueTarget(new_id, new_blocks); | |
| } | |
| } | |
| // Update block map given replacement blocks. | |
| for (auto& blk : *new_blocks) { | |
| id2block_[blk->id()] = &*blk; | |
| } | |
| // We need to kill the name and decorations for the call, which will be | |
| // deleted. | |
| context()->KillNamesAndDecorates(&*call_inst_itr); | |
| return true; | |
| } | |
| bool InlinePass::IsInlinableFunctionCall(const Instruction* inst) { | |
| if (inst->opcode() != spv::Op::OpFunctionCall) return false; | |
| const uint32_t calleeFnId = | |
| inst->GetSingleWordOperand(kSpvFunctionCallFunctionId); | |
| const auto ci = inlinable_.find(calleeFnId); | |
| if (ci == inlinable_.cend()) return false; | |
| if (early_return_funcs_.find(calleeFnId) != early_return_funcs_.end()) { | |
| // We rely on the merge-return pass to handle the early return case | |
| // in advance. | |
| std::string message = | |
| "The function '" + id2function_[calleeFnId]->DefInst().PrettyPrint() + | |
| "' could not be inlined because the return instruction " | |
| "is not at the end of the function. This could be fixed by " | |
| "running merge-return before inlining."; | |
| consumer()(SPV_MSG_WARNING, "", {0, 0, 0}, message.c_str()); | |
| return false; | |
| } | |
| return true; | |
| } | |
| void InlinePass::UpdateSucceedingPhis( | |
| std::vector<std::unique_ptr<BasicBlock>>& new_blocks) { | |
| const auto firstBlk = new_blocks.begin(); | |
| const auto lastBlk = new_blocks.end() - 1; | |
| const uint32_t firstId = (*firstBlk)->id(); | |
| const uint32_t lastId = (*lastBlk)->id(); | |
| const BasicBlock& const_last_block = *lastBlk->get(); | |
| const_last_block.ForEachSuccessorLabel( | |
| [&firstId, &lastId, this](const uint32_t succ) { | |
| BasicBlock* sbp = this->id2block_[succ]; | |
| sbp->ForEachPhiInst([&firstId, &lastId](Instruction* phi) { | |
| phi->ForEachInId([&firstId, &lastId](uint32_t* id) { | |
| if (*id == firstId) *id = lastId; | |
| }); | |
| }); | |
| }); | |
| } | |
| bool InlinePass::HasNoReturnInLoop(Function* func) { | |
| // If control not structured, do not do loop/return analysis | |
| // TODO: Analyze returns in non-structured control flow | |
| if (!context()->get_feature_mgr()->HasCapability(spv::Capability::Shader)) | |
| return false; | |
| const auto structured_analysis = context()->GetStructuredCFGAnalysis(); | |
| // Search for returns in structured construct. | |
| bool return_in_loop = false; | |
| for (auto& blk : *func) { | |
| auto terminal_ii = blk.cend(); | |
| --terminal_ii; | |
| if (spvOpcodeIsReturn(terminal_ii->opcode()) && | |
| structured_analysis->ContainingLoop(blk.id()) != 0) { | |
| return_in_loop = true; | |
| break; | |
| } | |
| } | |
| return !return_in_loop; | |
| } | |
| void InlinePass::AnalyzeReturns(Function* func) { | |
| // Analyze functions without a return in loop. | |
| if (HasNoReturnInLoop(func)) { | |
| no_return_in_loop_.insert(func->result_id()); | |
| } | |
| // Analyze functions with a return before its tail basic block. | |
| for (auto& blk : *func) { | |
| auto terminal_ii = blk.cend(); | |
| --terminal_ii; | |
| if (spvOpcodeIsReturn(terminal_ii->opcode()) && &blk != func->tail()) { | |
| early_return_funcs_.insert(func->result_id()); | |
| break; | |
| } | |
| } | |
| } | |
| bool InlinePass::IsInlinableFunction(Function* func) { | |
| // We can only inline a function if it has blocks. | |
| if (func->cbegin() == func->cend()) return false; | |
| // Do not inline functions with DontInline flag. | |
| if (func->control_mask() & uint32_t(spv::FunctionControlMask::DontInline)) { | |
| return false; | |
| } | |
| // Do not inline functions with returns in loops. Currently early return | |
| // functions are inlined by wrapping them in a one trip loop and implementing | |
| // the returns as a branch to the loop's merge block. However, this can only | |
| // done validly if the return was not in a loop in the original function. | |
| // Also remember functions with multiple (early) returns. | |
| AnalyzeReturns(func); | |
| if (no_return_in_loop_.find(func->result_id()) == no_return_in_loop_.cend()) { | |
| return false; | |
| } | |
| if (func->IsRecursive()) { | |
| return false; | |
| } | |
| // Do not inline functions with an abort instruction if they are called from a | |
| // continue construct. If it is inlined into a continue construct the backedge | |
| // will no longer post-dominate the continue target, which is invalid. An | |
| // `OpUnreachable` is acceptable because it will not change post-dominance if | |
| // it is statically unreachable. | |
| bool func_is_called_from_continue = | |
| funcs_called_from_continue_.count(func->result_id()) != 0; | |
| if (func_is_called_from_continue && ContainsAbortOtherThanUnreachable(func)) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| bool InlinePass::ContainsAbortOtherThanUnreachable(Function* func) const { | |
| return !func->WhileEachInst([](Instruction* inst) { | |
| return inst->opcode() == spv::Op::OpUnreachable || | |
| !spvOpcodeIsAbort(inst->opcode()); | |
| }); | |
| } | |
| void InlinePass::InitializeInline() { | |
| false_id_ = 0; | |
| // clear collections | |
| id2function_.clear(); | |
| id2block_.clear(); | |
| inlinable_.clear(); | |
| no_return_in_loop_.clear(); | |
| early_return_funcs_.clear(); | |
| funcs_called_from_continue_ = | |
| context()->GetStructuredCFGAnalysis()->FindFuncsCalledFromContinue(); | |
| for (auto& fn : *get_module()) { | |
| // Initialize function and block maps. | |
| id2function_[fn.result_id()] = &fn; | |
| for (auto& blk : fn) { | |
| id2block_[blk.id()] = &blk; | |
| } | |
| // Compute inlinability | |
| if (IsInlinableFunction(&fn)) inlinable_.insert(fn.result_id()); | |
| } | |
| } | |
| InlinePass::InlinePass() {} | |
| void InlinePass::FixDebugDeclares(Function* func) { | |
| std::map<uint32_t, Instruction*> access_chains; | |
| std::vector<Instruction*> debug_declare_insts; | |
| func->ForEachInst([&access_chains, &debug_declare_insts](Instruction* inst) { | |
| if (inst->opcode() == spv::Op::OpAccessChain) { | |
| access_chains[inst->result_id()] = inst; | |
| } | |
| if (inst->GetCommonDebugOpcode() == CommonDebugInfoDebugDeclare) { | |
| debug_declare_insts.push_back(inst); | |
| } | |
| }); | |
| for (auto& inst : debug_declare_insts) { | |
| FixDebugDeclare(inst, access_chains); | |
| } | |
| } | |
| void InlinePass::FixDebugDeclare( | |
| Instruction* dbg_declare_inst, | |
| const std::map<uint32_t, Instruction*>& access_chains) { | |
| do { | |
| uint32_t var_id = | |
| dbg_declare_inst->GetSingleWordInOperand(kSpvDebugDeclareVarInIdx); | |
| // The def-use chains are not kept up to date while inlining, so we need to | |
| // get the variable by traversing the functions. | |
| auto it = access_chains.find(var_id); | |
| if (it == access_chains.end()) { | |
| return; | |
| } | |
| Instruction* access_chain = it->second; | |
| // If the variable id in the debug declare is an access chain, it is | |
| // invalid. it needs to be fixed up. The debug declare will be updated so | |
| // that its Var operand becomes the base of the access chain. The indexes of | |
| // the access chain are prepended before the indexes of the debug declare. | |
| std::vector<Operand> operands; | |
| for (int i = 0; i < kSpvDebugDeclareVarInIdx; i++) { | |
| operands.push_back(dbg_declare_inst->GetInOperand(i)); | |
| } | |
| uint32_t access_chain_base = | |
| access_chain->GetSingleWordInOperand(kSpvAccessChainBaseInIdx); | |
| operands.push_back(Operand(SPV_OPERAND_TYPE_ID, {access_chain_base})); | |
| operands.push_back( | |
| dbg_declare_inst->GetInOperand(kSpvDebugDeclareVarInIdx + 1)); | |
| for (uint32_t i = kSpvAccessChainBaseInIdx + 1; | |
| i < access_chain->NumInOperands(); ++i) { | |
| operands.push_back(access_chain->GetInOperand(i)); | |
| } | |
| for (uint32_t i = kSpvDebugDeclareVarInIdx + 2; | |
| i < dbg_declare_inst->NumInOperands(); ++i) { | |
| operands.push_back(dbg_declare_inst->GetInOperand(i)); | |
| } | |
| dbg_declare_inst->SetInOperands(std::move(operands)); | |
| } while (true); | |
| } | |
| } // namespace opt | |
| } // namespace spvtools |