|  | ; RUN: opt < %s -indvars -S | FileCheck %s | 
|  | ; RUN: opt < %s -indvars -enable-iv-rewrite=false -S | FileCheck %s | 
|  | ; | 
|  | ; PR1301 | 
|  |  | 
|  | ; Do a bunch of analysis and prove that the loops can use an i32 trip | 
|  | ; count without casting. | 
|  | ; | 
|  | ; Note that all four functions should actually be converted to | 
|  | ; memset. However, this test case validates indvars behavior.  We | 
|  | ; don't check that phis are "folded together" because that is a job | 
|  | ; for loop strength reduction. But indvars must remove sext, zext, and add i8. | 
|  | ; | 
|  | ; CHECK-NOT: {{sext|zext|add i8}} | 
|  |  | 
|  | ; ModuleID = 'ada.bc' | 
|  | target datalayout = "e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:32:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32" | 
|  | target triple = "i686-pc-linux-gnu" | 
|  |  | 
|  | define void @kinds__sbytezero([256 x i32]* nocapture %a) nounwind { | 
|  | bb.thread: | 
|  | %tmp46 = getelementptr [256 x i32]* %a, i32 0, i32 0		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp46 | 
|  | br label %bb | 
|  |  | 
|  | bb:		; preds = %bb, %bb.thread | 
|  | %i.0.reg2mem.0 = phi i8 [ -128, %bb.thread ], [ %tmp8, %bb ]		; <i8> [#uses=1] | 
|  | %tmp8 = add i8 %i.0.reg2mem.0, 1		; <i8> [#uses=3] | 
|  | %tmp1 = sext i8 %tmp8 to i32		; <i32> [#uses=1] | 
|  | %tmp3 = add i32 %tmp1, 128		; <i32> [#uses=1] | 
|  | %tmp4 = getelementptr [256 x i32]* %a, i32 0, i32 %tmp3		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp4 | 
|  | %0 = icmp eq i8 %tmp8, 127		; <i1> [#uses=1] | 
|  | br i1 %0, label %return, label %bb | 
|  |  | 
|  | return:		; preds = %bb | 
|  | ret void | 
|  | } | 
|  |  | 
|  | define void @kinds__ubytezero([256 x i32]* nocapture %a) nounwind { | 
|  | bb.thread: | 
|  | %tmp35 = getelementptr [256 x i32]* %a, i32 0, i32 0		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp35 | 
|  | br label %bb | 
|  |  | 
|  | bb:		; preds = %bb, %bb.thread | 
|  | %i.0.reg2mem.0 = phi i8 [ 0, %bb.thread ], [ %tmp7, %bb ]		; <i8> [#uses=1] | 
|  | %tmp7 = add i8 %i.0.reg2mem.0, 1		; <i8> [#uses=3] | 
|  | %tmp1 = zext i8 %tmp7 to i32		; <i32> [#uses=1] | 
|  | %tmp3 = getelementptr [256 x i32]* %a, i32 0, i32 %tmp1		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp3 | 
|  | %0 = icmp eq i8 %tmp7, -1		; <i1> [#uses=1] | 
|  | br i1 %0, label %return, label %bb | 
|  |  | 
|  | return:		; preds = %bb | 
|  | ret void | 
|  | } | 
|  |  | 
|  | define void @kinds__srangezero([21 x i32]* nocapture %a) nounwind { | 
|  | bb.thread: | 
|  | br label %bb | 
|  |  | 
|  | bb:		; preds = %bb, %bb.thread | 
|  | %i.0.reg2mem.0 = phi i8 [ -10, %bb.thread ], [ %tmp7, %bb ]		; <i8> [#uses=2] | 
|  | %tmp12 = sext i8 %i.0.reg2mem.0 to i32		; <i32> [#uses=1] | 
|  | %tmp4 = add i32 %tmp12, 10		; <i32> [#uses=1] | 
|  | %tmp5 = getelementptr [21 x i32]* %a, i32 0, i32 %tmp4		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp5 | 
|  | %tmp7 = add i8 %i.0.reg2mem.0, 1		; <i8> [#uses=2] | 
|  | %0 = icmp sgt i8 %tmp7, 10		; <i1> [#uses=1] | 
|  | br i1 %0, label %return, label %bb | 
|  |  | 
|  | return:		; preds = %bb | 
|  | ret void | 
|  | } | 
|  |  | 
|  | define void @kinds__urangezero([21 x i32]* nocapture %a) nounwind { | 
|  | bb.thread: | 
|  | br label %bb | 
|  |  | 
|  | bb:		; preds = %bb, %bb.thread | 
|  | %i.0.reg2mem.0 = phi i8 [ 10, %bb.thread ], [ %tmp7, %bb ]		; <i8> [#uses=2] | 
|  | %tmp12 = sext i8 %i.0.reg2mem.0 to i32		; <i32> [#uses=1] | 
|  | %tmp4 = add i32 %tmp12, -10		; <i32> [#uses=1] | 
|  | %tmp5 = getelementptr [21 x i32]* %a, i32 0, i32 %tmp4		; <i32*> [#uses=1] | 
|  | store i32 0, i32* %tmp5 | 
|  | %tmp7 = add i8 %i.0.reg2mem.0, 1		; <i8> [#uses=2] | 
|  | %0 = icmp sgt i8 %tmp7, 30		; <i1> [#uses=1] | 
|  | br i1 %0, label %return, label %bb | 
|  |  | 
|  | return:		; preds = %bb | 
|  | ret void | 
|  | } |