| //===-- VEInstrInfo.td - Target Description for VE Target -----------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the VE instructions in TableGen format. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Instruction format superclass |
| //===----------------------------------------------------------------------===// |
| |
| include "VEInstrFormats.td" |
| |
| //===----------------------------------------------------------------------===// |
| // Helper functions to retrieve target constants. |
| // |
| // VE instructions have a space to hold following immediates |
| // $sy has 7 bits to represent simm7, uimm7, simm7fp, or uimm7fp. |
| // $sz also has 7 bits to represent mimm or mimmfp. |
| // $disp has 32 bits to represent simm32. |
| // |
| // The mimm is a special immediate value of sequential bit stream of 0 or 1. |
| // `(m)0`: Represents 0 sequence then 1 sequence like 0b00...0011...11, |
| // where `m` is equal to the number of leading zeros. |
| // `(m)1`: Represents 1 sequence then 0 sequence like 0b11...1100...00, |
| // where `m` is equal to the number of leading ones. |
| // Each bit of mimm's 7 bits is used like below: |
| // bit 6 : If `(m)0`, this bit is 1. Otherwise, this bit is 0. |
| // bit 5-0: Represents the m (0-63). |
| // Use `!add(m, 64)` to generates an immediate value in pattern matchings. |
| // |
| // The floating point immediate value is not something like compacted value. |
| // It is simple integer representation, so it works rarely. |
| // e.g. 0.0 (0x00000000) or -2.0 (0xC0000000=(2)1). |
| //===----------------------------------------------------------------------===// |
| |
| def ULO7 : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(N->getZExtValue() & 0x7f, |
| SDLoc(N), MVT::i32); |
| }]>; |
| def LO7 : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(SignExtend32(N->getSExtValue(), 7), |
| SDLoc(N), MVT::i32); |
| }]>; |
| def MIMM : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(val2MImm(getImmVal(N)), |
| SDLoc(N), MVT::i32); |
| }]>; |
| def LO32 : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(Lo_32(N->getZExtValue()), |
| SDLoc(N), MVT::i32); |
| }]>; |
| def HI32 : SDNodeXForm<imm, [{ |
| // Transformation function: shift the immediate value down into the low bits. |
| return CurDAG->getTargetConstant(Hi_32(N->getZExtValue()), |
| SDLoc(N), MVT::i32); |
| }]>; |
| |
| def LO7FP : SDNodeXForm<fpimm, [{ |
| uint64_t Val = getFpImmVal(N); |
| return CurDAG->getTargetConstant(SignExtend32(Val, 7), SDLoc(N), MVT::i32); |
| }]>; |
| def MIMMFP : SDNodeXForm<fpimm, [{ |
| return CurDAG->getTargetConstant(val2MImm(getFpImmVal(N)), |
| SDLoc(N), MVT::i32); |
| }]>; |
| def LOFP32 : SDNodeXForm<fpimm, [{ |
| return CurDAG->getTargetConstant(Lo_32(getFpImmVal(N) & 0xffffffff), |
| SDLoc(N), MVT::i32); |
| }]>; |
| def HIFP32 : SDNodeXForm<fpimm, [{ |
| return CurDAG->getTargetConstant(Hi_32(getFpImmVal(N)), SDLoc(N), MVT::i32); |
| }]>; |
| |
| def icond2cc : SDNodeXForm<cond, [{ |
| VECC::CondCode VECC = intCondCode2Icc(N->get()); |
| return CurDAG->getTargetConstant(VECC, SDLoc(N), MVT::i32); |
| }]>; |
| |
| def icond2ccSwap : SDNodeXForm<cond, [{ |
| ISD::CondCode CC = getSetCCSwappedOperands(N->get()); |
| VECC::CondCode VECC = intCondCode2Icc(CC); |
| return CurDAG->getTargetConstant(VECC, SDLoc(N), MVT::i32); |
| }]>; |
| |
| def fcond2cc : SDNodeXForm<cond, [{ |
| VECC::CondCode VECC = fpCondCode2Fcc(N->get()); |
| return CurDAG->getTargetConstant(VECC, SDLoc(N), MVT::i32); |
| }]>; |
| |
| def fcond2ccSwap : SDNodeXForm<cond, [{ |
| ISD::CondCode CC = getSetCCSwappedOperands(N->get()); |
| VECC::CondCode VECC = fpCondCode2Fcc(CC); |
| return CurDAG->getTargetConstant(VECC, SDLoc(N), MVT::i32); |
| }]>; |
| |
| def CCOP : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(N->getZExtValue(), |
| SDLoc(N), MVT::i32); |
| }]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Feature predicates. |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Instruction Pattern Stuff |
| //===----------------------------------------------------------------------===// |
| |
| // zero |
| def ZeroAsmOperand : AsmOperandClass { |
| let Name = "Zero"; |
| } |
| def zero : Operand<i32>, PatLeaf<(imm), [{ |
| return N->getSExtValue() == 0; }]> { |
| let ParserMatchClass = ZeroAsmOperand; |
| } |
| |
| // uimm0to2 - Special immediate value represents 0, 1, and 2. |
| def UImm0to2AsmOperand : AsmOperandClass { |
| let Name = "UImm0to2"; |
| } |
| def uimm0to2 : Operand<i32>, PatLeaf<(imm), [{ |
| return N->getZExtValue() < 3; }], ULO7> { |
| let ParserMatchClass = UImm0to2AsmOperand; |
| } |
| |
| // uimm1 - Generic immediate value. |
| def UImm1AsmOperand : AsmOperandClass { |
| let Name = "UImm1"; |
| } |
| def uimm1 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<1>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm1AsmOperand; |
| } |
| |
| // uimm2 - Generic immediate value. |
| def UImm2AsmOperand : AsmOperandClass { |
| let Name = "UImm2"; |
| } |
| def uimm2 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<2>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm2AsmOperand; |
| } |
| |
| // uimm3 - Generic immediate value. |
| def UImm3AsmOperand : AsmOperandClass { |
| let Name = "UImm3"; |
| } |
| def uimm3 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<3>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm3AsmOperand; |
| } |
| |
| // uimm4 - Generic immediate value. |
| def UImm4AsmOperand : AsmOperandClass { |
| let Name = "UImm4"; |
| } |
| def uimm4 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<4>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm4AsmOperand; |
| } |
| |
| // uimm6 - Generic immediate value. |
| def UImm6AsmOperand : AsmOperandClass { |
| let Name = "UImm6"; |
| } |
| def uimm6 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<6>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm6AsmOperand; |
| } |
| |
| // uimm7 - Generic immediate value. |
| def UImm7AsmOperand : AsmOperandClass { |
| let Name = "UImm7"; |
| } |
| def uimm7 : Operand<i32>, PatLeaf<(imm), [{ |
| return isUInt<7>(N->getZExtValue()); }], ULO7> { |
| let ParserMatchClass = UImm7AsmOperand; |
| } |
| |
| // simm7 - Generic immediate value. |
| def SImm7AsmOperand : AsmOperandClass { |
| let Name = "SImm7"; |
| } |
| def simm7 : Operand<i32>, PatLeaf<(imm), [{ |
| return isInt<7>(N->getSExtValue()); }], LO7> { |
| let ParserMatchClass = SImm7AsmOperand; |
| let DecoderMethod = "DecodeSIMM7"; |
| } |
| |
| // mimm - Special immediate value of sequential bit stream of 0 or 1. |
| def MImmAsmOperand : AsmOperandClass { |
| let Name = "MImm"; |
| let ParserMethod = "parseMImmOperand"; |
| } |
| def mimm : Operand<i32>, PatLeaf<(imm), [{ |
| return isMImmVal(getImmVal(N)); }], MIMM> { |
| let ParserMatchClass = MImmAsmOperand; |
| let PrintMethod = "printMImmOperand"; |
| } |
| |
| // zerofp - Generic fp immediate zero value. |
| def zerofp : Operand<i32>, PatLeaf<(fpimm), [{ |
| return getFpImmVal(N) == 0; }]> { |
| let ParserMatchClass = ZeroAsmOperand; |
| } |
| |
| // simm7fp - Generic fp immediate value. |
| def simm7fp : Operand<i32>, PatLeaf<(fpimm), [{ |
| return isInt<7>(getFpImmVal(N)); |
| }], LO7FP> { |
| let ParserMatchClass = SImm7AsmOperand; |
| let DecoderMethod = "DecodeSIMM7"; |
| } |
| |
| // mimmfp - Special fp immediate value of sequential bit stream of 0 or 1. |
| def mimmfp : Operand<i32>, PatLeaf<(fpimm), [{ |
| return isMImmVal(getFpImmVal(N)); }], MIMMFP> { |
| let ParserMatchClass = MImmAsmOperand; |
| let PrintMethod = "printMImmOperand"; |
| } |
| |
| // mimmfp32 - 32 bit width mimmfp |
| // Float value places at higher bits, so ignore lower 32 bits. |
| def mimmfp32 : Operand<i32>, PatLeaf<(fpimm), [{ |
| return isMImm32Val(getFpImmVal(N) >> 32); }], MIMMFP> { |
| let ParserMatchClass = MImmAsmOperand; |
| let PrintMethod = "printMImmOperand"; |
| } |
| |
| // other generic patterns to use in pattern matchings |
| def simm32 : PatLeaf<(imm), [{ return isInt<32>(N->getSExtValue()); }]>; |
| def uimm32 : PatLeaf<(imm), [{ return isUInt<32>(N->getZExtValue()); }]>; |
| def lomsbzero : PatLeaf<(imm), [{ return (N->getZExtValue() & 0x80000000) |
| == 0; }]>; |
| def lozero : PatLeaf<(imm), [{ return (N->getZExtValue() & 0xffffffff) |
| == 0; }]>; |
| def fplomsbzero : PatLeaf<(fpimm), [{ return (getFpImmVal(N) & 0x80000000) |
| == 0; }]>; |
| def fplozero : PatLeaf<(fpimm), [{ return (getFpImmVal(N) & 0xffffffff) |
| == 0; }]>; |
| def nonzero : PatLeaf<(imm), [{ return N->getSExtValue() !=0 ; }]>; |
| |
| def CCSIOp : PatLeaf<(cond), [{ |
| switch (N->get()) { |
| default: return true; |
| case ISD::SETULT: |
| case ISD::SETULE: |
| case ISD::SETUGT: |
| case ISD::SETUGE: return false; |
| } |
| }]>; |
| |
| def CCUIOp : PatLeaf<(cond), [{ |
| switch (N->get()) { |
| default: return true; |
| case ISD::SETLT: |
| case ISD::SETLE: |
| case ISD::SETGT: |
| case ISD::SETGE: return false; |
| } |
| }]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Addressing modes. |
| // SX-Aurora has following fields. |
| // sz: register or 0 |
| // sy: register or immediate (-64 to 63) |
| // disp: immediate (-2147483648 to 2147483647) |
| // |
| // There are two kinds of instruction. |
| // ASX format uses sz + sy + disp. |
| // AS format uses sz + disp. |
| // |
| // Moreover, there are four kinds of assembly instruction format. |
| // ASX format uses "disp", "disp(, sz)", "disp(sy)", "disp(sy, sz)", |
| // "(, sz)", "(sy)", or "(sy, sz)". |
| // AS format uses "disp", "disp(, sz)", or "(, sz)" in general. |
| // AS format in RRM format uses "disp", "disp(sz)", or "(sz)". |
| // AS format in RRM format for host memory access uses "sz", "(sz)", |
| // or "disp(sz)". |
| // |
| // We defined them below. |
| // |
| // ASX format: |
| // MEMrri, MEMrii, MEMzri, MEMzii |
| // AS format: |
| // MEMriASX, MEMziASX : simple AS format |
| // MEMriRRM, MEMziRRM : AS format in RRM format |
| // MEMriHM, MEMziHM : AS format in RRM format for host memory access |
| //===----------------------------------------------------------------------===// |
| |
| // DAG selections for both ASX and AS formats. |
| def ADDRrri : ComplexPattern<iPTR, 3, "selectADDRrri", [frameindex], []>; |
| def ADDRrii : ComplexPattern<iPTR, 3, "selectADDRrii", [frameindex], []>; |
| def ADDRzri : ComplexPattern<iPTR, 3, "selectADDRzri", [], []>; |
| def ADDRzii : ComplexPattern<iPTR, 3, "selectADDRzii", [], []>; |
| def ADDRri : ComplexPattern<iPTR, 2, "selectADDRri", [frameindex], []>; |
| def ADDRzi : ComplexPattern<iPTR, 2, "selectADDRzi", [], []>; |
| |
| // ASX format. |
| def VEMEMrriAsmOperand : AsmOperandClass { |
| let Name = "MEMrri"; |
| let ParserMethod = "parseMEMOperand"; |
| } |
| def VEMEMriiAsmOperand : AsmOperandClass { |
| let Name = "MEMrii"; |
| let ParserMethod = "parseMEMOperand"; |
| } |
| def VEMEMzriAsmOperand : AsmOperandClass { |
| let Name = "MEMzri"; |
| let ParserMethod = "parseMEMOperand"; |
| } |
| def VEMEMziiAsmOperand : AsmOperandClass { |
| let Name = "MEMzii"; |
| let ParserMethod = "parseMEMOperand"; |
| } |
| |
| // ASX format uses single assembly instruction format. |
| def MEMrri : Operand<iPTR> { |
| let PrintMethod = "printMemASXOperand"; |
| let MIOperandInfo = (ops ptr_rc, ptr_rc, i64imm); |
| let ParserMatchClass = VEMEMrriAsmOperand; |
| } |
| def MEMrii : Operand<iPTR> { |
| let PrintMethod = "printMemASXOperand"; |
| let MIOperandInfo = (ops ptr_rc, i32imm, i64imm); |
| let ParserMatchClass = VEMEMriiAsmOperand; |
| } |
| def MEMzri : Operand<iPTR> { |
| let PrintMethod = "printMemASXOperand"; |
| let MIOperandInfo = (ops i32imm /* = 0 */, ptr_rc, i64imm); |
| let ParserMatchClass = VEMEMzriAsmOperand; |
| } |
| def MEMzii : Operand<iPTR> { |
| let PrintMethod = "printMemASXOperand"; |
| let MIOperandInfo = (ops i32imm /* = 0 */, i32imm, i64imm); |
| let ParserMatchClass = VEMEMziiAsmOperand; |
| } |
| |
| // AS format. |
| def VEMEMriAsmOperand : AsmOperandClass { |
| let Name = "MEMri"; |
| let ParserMethod = "parseMEMAsOperand"; |
| } |
| def VEMEMziAsmOperand : AsmOperandClass { |
| let Name = "MEMzi"; |
| let ParserMethod = "parseMEMAsOperand"; |
| } |
| |
| // AS format uses multiple assembly instruction formats |
| // 1. AS generic assembly instruction format: |
| def MEMriASX : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandASX"; |
| let MIOperandInfo = (ops ptr_rc, i32imm); |
| let ParserMatchClass = VEMEMriAsmOperand; |
| } |
| def MEMziASX : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandASX"; |
| let MIOperandInfo = (ops i32imm /* = 0 */, i32imm); |
| let ParserMatchClass = VEMEMziAsmOperand; |
| } |
| |
| // 2. AS RRM style assembly instruction format: |
| def MEMriRRM : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandRRM"; |
| let MIOperandInfo = (ops ptr_rc, i32imm); |
| let ParserMatchClass = VEMEMriAsmOperand; |
| } |
| def MEMziRRM : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandRRM"; |
| let MIOperandInfo = (ops i32imm /* = 0 */, i32imm); |
| let ParserMatchClass = VEMEMziAsmOperand; |
| } |
| |
| // 3. AS HM style assembly instruction format: |
| def MEMriHM : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandHM"; |
| let MIOperandInfo = (ops ptr_rc, i32imm); |
| let ParserMatchClass = VEMEMriAsmOperand; |
| } |
| def MEMziHM : Operand<iPTR> { |
| let PrintMethod = "printMemASOperandHM"; |
| let MIOperandInfo = (ops i32imm /* = 0 */, i32imm); |
| let ParserMatchClass = VEMEMziAsmOperand; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Other operands. |
| //===----------------------------------------------------------------------===// |
| |
| // Branch targets have OtherVT type. |
| def brtarget32 : Operand<OtherVT> { |
| let EncoderMethod = "getBranchTargetOpValue"; |
| let DecoderMethod = "DecodeSIMM32"; |
| } |
| |
| // Operand for printing out a condition code. |
| def CCOpAsmOperand : AsmOperandClass { let Name = "CCOp"; } |
| def CCOp : Operand<i32>, ImmLeaf<i32, [{ |
| return Imm >= 0 && Imm < 22; }], CCOP> { |
| let PrintMethod = "printCCOperand"; |
| let DecoderMethod = "DecodeCCOperand"; |
| let EncoderMethod = "getCCOpValue"; |
| let ParserMatchClass = CCOpAsmOperand; |
| } |
| |
| // Operand for a rounding mode code. |
| def RDOpAsmOperand : AsmOperandClass { |
| let Name = "RDOp"; |
| } |
| def RDOp : Operand<i32> { |
| let PrintMethod = "printRDOperand"; |
| let DecoderMethod = "DecodeRDOperand"; |
| let EncoderMethod = "getRDOpValue"; |
| let ParserMatchClass = RDOpAsmOperand; |
| } |
| |
| def VEhi : SDNode<"VEISD::Hi", SDTIntUnaryOp>; |
| def VElo : SDNode<"VEISD::Lo", SDTIntUnaryOp>; |
| |
| // These are target-independent nodes, but have target-specific formats. |
| def SDT_SPCallSeqStart : SDCallSeqStart<[ SDTCisVT<0, i64>, |
| SDTCisVT<1, i64> ]>; |
| def SDT_SPCallSeqEnd : SDCallSeqEnd<[ SDTCisVT<0, i64>, |
| SDTCisVT<1, i64> ]>; |
| |
| def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_SPCallSeqStart, |
| [SDNPHasChain, SDNPOutGlue]>; |
| def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_SPCallSeqEnd, |
| [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>; |
| |
| def SDT_SPCall : SDTypeProfile<0, -1, [SDTCisVT<0, i64>]>; |
| def call : SDNode<"VEISD::CALL", SDT_SPCall, |
| [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue, |
| SDNPVariadic]>; |
| |
| def retflag : SDNode<"VEISD::RET_FLAG", SDTNone, |
| [SDNPHasChain, SDNPOptInGlue, SDNPVariadic]>; |
| |
| def getGOT : Operand<iPTR>; |
| |
| // Comparisons |
| def cmpi : SDNode<"VEISD::CMPI", SDTIntBinOp>; |
| def cmpu : SDNode<"VEISD::CMPU", SDTIntBinOp>; |
| def cmpf : SDNode<"VEISD::CMPF", SDTFPBinOp>; |
| def SDT_Cmpq : SDTypeProfile<1, 2, [SDTCisSameAs<1, 2>, SDTCisFP<0>, |
| SDTCisFP<2>]>; |
| def cmpq : SDNode<"VEISD::CMPQ", SDT_Cmpq>; |
| |
| // res = cmov cmp, t, f, cond |
| def SDT_Cmov : SDTypeProfile<1, 4, [SDTCisSameAs<0, 2>, SDTCisSameAs<2, 3>, |
| SDTCisVT<4, i32>]>; |
| def cmov : SDNode<"VEISD::CMOV", SDT_Cmov>; |
| |
| def VEeh_sjlj_setjmp: SDNode<"VEISD::EH_SJLJ_SETJMP", |
| SDTypeProfile<1, 1, [SDTCisInt<0>, |
| SDTCisPtrTy<1>]>, |
| [SDNPHasChain, SDNPSideEffect]>; |
| def VEeh_sjlj_longjmp: SDNode<"VEISD::EH_SJLJ_LONGJMP", |
| SDTypeProfile<0, 1, [SDTCisPtrTy<0>]>, |
| [SDNPHasChain, SDNPSideEffect]>; |
| def VEeh_sjlj_setup_dispatch: SDNode<"VEISD::EH_SJLJ_SETUP_DISPATCH", |
| SDTypeProfile<0, 0, []>, |
| [SDNPHasChain, SDNPSideEffect]>; |
| |
| // GETFUNPLT for PIC |
| def GetFunPLT : SDNode<"VEISD::GETFUNPLT", SDTIntUnaryOp>; |
| |
| // GETTLSADDR for TLS |
| def GetTLSAddr : SDNode<"VEISD::GETTLSADDR", SDT_SPCall, |
| [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue, |
| SDNPVariadic]>; |
| |
| // GETSTACKTOP |
| def GetStackTop : SDNode<"VEISD::GETSTACKTOP", SDTNone, |
| [SDNPHasChain, SDNPSideEffect]>; |
| |
| // TS1AM |
| def SDT_TS1AM : SDTypeProfile<1, 3, [SDTCisSameAs<0, 3>, SDTCisPtrTy<1>, |
| SDTCisVT<2, i32>, SDTCisInt<3>]>; |
| def ts1am : SDNode<"VEISD::TS1AM", SDT_TS1AM, |
| [SDNPHasChain, SDNPMayStore, SDNPMayLoad, |
| SDNPMemOperand]>; |
| |
| //===----------------------------------------------------------------------===// |
| // VE Flag Conditions |
| //===----------------------------------------------------------------------===// |
| |
| // Note that these values must be kept in sync with the CCOp::CondCode enum |
| // values. |
| class CC_VAL<int N> : PatLeaf<(i32 N)>; |
| def CC_IG : CC_VAL< 0>; // Greater |
| def CC_IL : CC_VAL< 1>; // Less |
| def CC_INE : CC_VAL< 2>; // Not Equal |
| def CC_IEQ : CC_VAL< 3>; // Equal |
| def CC_IGE : CC_VAL< 4>; // Greater or Equal |
| def CC_ILE : CC_VAL< 5>; // Less or Equal |
| def CC_AF : CC_VAL< 6>; // Always false |
| def CC_G : CC_VAL< 7>; // Greater |
| def CC_L : CC_VAL< 8>; // Less |
| def CC_NE : CC_VAL< 9>; // Not Equal |
| def CC_EQ : CC_VAL<10>; // Equal |
| def CC_GE : CC_VAL<11>; // Greater or Equal |
| def CC_LE : CC_VAL<12>; // Less or Equal |
| def CC_NUM : CC_VAL<13>; // Number |
| def CC_NAN : CC_VAL<14>; // NaN |
| def CC_GNAN : CC_VAL<15>; // Greater or NaN |
| def CC_LNAN : CC_VAL<16>; // Less or NaN |
| def CC_NENAN : CC_VAL<17>; // Not Equal or NaN |
| def CC_EQNAN : CC_VAL<18>; // Equal or NaN |
| def CC_GENAN : CC_VAL<19>; // Greater or Equal or NaN |
| def CC_LENAN : CC_VAL<20>; // Less or Equal or NaN |
| def CC_AT : CC_VAL<21>; // Always true |
| |
| //===----------------------------------------------------------------------===// |
| // VE Rounding Mode |
| //===----------------------------------------------------------------------===// |
| |
| // Note that these values must be kept in sync with the VERD::RoundingMode enum |
| // values. |
| class RD_VAL<int N> : PatLeaf<(i32 N)>; |
| def RD_NONE : RD_VAL< 0>; // According to PSW |
| def RD_RZ : RD_VAL< 8>; // Round toward Zero |
| def RD_RP : RD_VAL< 9>; // Round toward Plus infinity |
| def RD_RM : RD_VAL<10>; // Round toward Minus infinity |
| def RD_RN : RD_VAL<11>; // Round to Nearest (ties to Even) |
| def RD_RA : RD_VAL<12>; // Round to Nearest (ties to Away) |
| |
| //===----------------------------------------------------------------------===// |
| // VE Multiclasses for common instruction formats |
| //===----------------------------------------------------------------------===// |
| |
| // Multiclass for generic RR type instructions |
| let hasSideEffects = 0 in |
| multiclass RRbm<string opcStr, bits<8>opc, |
| RegisterClass RCo, ValueType Tyo, |
| RegisterClass RCi, ValueType Tyi, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7, Operand mOp = mimm, |
| bit MoveImm = 0> { |
| def rr : RR<opc, (outs RCo:$sx), (ins RCi:$sy, RCi:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode Tyi:$sy, Tyi:$sz))]>; |
| // VE calculates (OpNode $sy, $sz), but llvm requires to have immediate |
| // in RHS, so we use following definition. |
| let cy = 0 in |
| def ri : RR<opc, (outs RCo:$sx), (ins RCi:$sz, immOp:$sy), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode Tyi:$sz, (Tyi immOp:$sy)))]>; |
| let cz = 0 in |
| def rm : RR<opc, (outs RCo:$sx), (ins RCi:$sy, mOp:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode Tyi:$sy, (Tyi mOp:$sz)))]>; |
| let cy = 0, cz = 0 in |
| def im : RR<opc, (outs RCo:$sx), (ins immOp:$sy, mOp:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode (Tyi immOp:$sy), (Tyi mOp:$sz)))]> { |
| // VE uses ORim as a move immediate instruction, so declare it here. |
| // An instruction declared as MoveImm will be optimized in FoldImmediate |
| // later. |
| let isMoveImm = MoveImm; |
| } |
| } |
| |
| // Multiclass for non-commutative RR type instructions |
| let hasSideEffects = 0 in |
| multiclass RRNCbm<string opcStr, bits<8>opc, |
| RegisterClass RCo, ValueType Tyo, |
| RegisterClass RCi, ValueType Tyi, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7, Operand mOp = mimm> { |
| def rr : RR<opc, (outs RCo:$sx), (ins RCi:$sy, RCi:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode Tyi:$sy, Tyi:$sz))]>; |
| let cy = 0 in |
| def ir : RR<opc, (outs RCo:$sx), (ins immOp:$sy, RCi:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode (Tyi immOp:$sy), Tyi:$sz))]>; |
| let cz = 0 in |
| def rm : RR<opc, (outs RCo:$sx), (ins RCi:$sy, mOp:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode Tyi:$sy, (Tyi mOp:$sz)))]>; |
| let cy = 0, cz = 0 in |
| def im : RR<opc, (outs RCo:$sx), (ins immOp:$sy, mOp:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz"), |
| [(set Tyo:$sx, (OpNode (Tyi immOp:$sy), (Tyi mOp:$sz)))]>; |
| } |
| |
| // Generic RR multiclass with 2 arguments. |
| // e.g. ADDUL, ADDSWSX, ADDSWZX, and etc. |
| multiclass RRm<string opcStr, bits<8>opc, |
| RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7, Operand mOp = mimm, bit MoveImm = 0> : |
| RRbm<opcStr, opc, RC, Ty, RC, Ty, OpNode, immOp, mOp, MoveImm>; |
| |
| // Generic RR multiclass for non-commutative instructions with 2 arguments. |
| // e.g. SUBUL, SUBUW, SUBSWSX, and etc. |
| multiclass RRNCm<string opcStr, bits<8>opc, |
| RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7, Operand mOp = mimm> : |
| RRNCbm<opcStr, opc, RC, Ty, RC, Ty, OpNode, immOp, mOp>; |
| |
| // Generic RR multiclass for floating point instructions with 2 arguments. |
| // e.g. FADDD, FADDS, FSUBD, and etc. |
| multiclass RRFm<string opcStr, bits<8>opc, |
| RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7fp, Operand mOp = mimmfp> : |
| RRNCbm<opcStr, opc, RC, Ty, RC, Ty, OpNode, immOp, mOp>; |
| |
| // Generic RR multiclass for shift instructions with 2 arguments. |
| // e.g. SLL, SRL, SLAWSX, and etc. |
| let hasSideEffects = 0 in |
| multiclass RRIm<string opcStr, bits<8>opc, |
| RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag> { |
| def rr : RR<opc, (outs RC:$sx), (ins RC:$sz, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode Ty:$sz, i32:$sy))]>; |
| let cz = 0 in |
| def mr : RR<opc, (outs RC:$sx), (ins mimm:$sz, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode (Ty mimm:$sz), i32:$sy))]>; |
| let cy = 0 in |
| def ri : RR<opc, (outs RC:$sx), (ins RC:$sz, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode Ty:$sz, (i32 uimm7:$sy)))]>; |
| let cy = 0, cz = 0 in |
| def mi : RR<opc, (outs RC:$sx), (ins mimm:$sz, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode (Ty mimm:$sz), (i32 uimm7:$sy)))]>; |
| } |
| |
| // Special RR multiclass for 128 bits shift left instruction. |
| // e.g. SLD |
| let Constraints = "$hi = $sx", DisableEncoding = "$hi", hasSideEffects = 0 in |
| multiclass RRILDm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rrr : RR<opc, (outs RC:$sx), (ins RC:$hi, RC:$sz, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cz = 0 in |
| def rmr : RR<opc, (outs RC:$sx), (ins RC:$hi, mimm:$sz, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cy = 0 in |
| def rri : RR<opc, (outs RC:$sx), (ins RC:$hi, RC:$sz, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cy = 0, cz = 0 in |
| def rmi : RR<opc, (outs RC:$sx), (ins RC:$hi, mimm:$sz, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| } |
| |
| // Special RR multiclass for 128 bits shift right instruction. |
| // e.g. SRD |
| let Constraints = "$low = $sx", DisableEncoding = "$low", hasSideEffects = 0 in |
| multiclass RRIRDm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rrr : RR<opc, (outs RC:$sx), (ins RC:$sz, RC:$low, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cz = 0 in |
| def mrr : RR<opc, (outs RC:$sx), (ins mimm:$sz, RC:$low, I32:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cy = 0 in |
| def rri : RR<opc, (outs RC:$sx), (ins RC:$sz, RC:$low, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| let cy = 0, cz = 0 in |
| def mri : RR<opc, (outs RC:$sx), (ins mimm:$sz, RC:$low, uimm7:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy")>; |
| } |
| |
| // Generic RR multiclass with an argument. |
| // e.g. LDZ, PCNT, and BRV |
| let cy = 0, sy = 0, hasSideEffects = 0 in |
| multiclass RRI1m<string opcStr, bits<8>opc, RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag> { |
| def r : RR<opc, (outs RC:$sx), (ins RC:$sz), !strconcat(opcStr, " $sx, $sz"), |
| [(set Ty:$sx, (OpNode Ty:$sz))]>; |
| let cz = 0 in |
| def m : RR<opc, (outs RC:$sx), (ins mimm:$sz), |
| !strconcat(opcStr, " $sx, $sz"), |
| [(set Ty:$sx, (OpNode (Ty mimm:$sz)))]>; |
| } |
| |
| // Special RR multiclass for MRG instruction. |
| // e.g. MRG |
| let Constraints = "$sx = $sd", DisableEncoding = "$sd", hasSideEffects = 0 in |
| multiclass RRMRGm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rr : RR<opc, (outs RC:$sx), (ins RC:$sy, RC:$sz, RC:$sd), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0 in |
| def ir : RR<opc, (outs RC:$sx), (ins simm7:$sy, RC:$sz, RC:$sd), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cz = 0 in |
| def rm : RR<opc, (outs RC:$sx), (ins RC:$sy, mimm:$sz, RC:$sd), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0, cz = 0 in |
| def im : RR<opc, (outs RC:$sx), (ins simm7:$sy, mimm:$sz, RC:$sd), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| } |
| |
| // Special RR multiclass for BSWP instruction. |
| // e.g. BSWP |
| let hasSideEffects = 0 in |
| multiclass RRSWPm<string opcStr, bits<8>opc, |
| RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag> { |
| let cy = 0 in |
| def ri : RR<opc, (outs RC:$sx), (ins RC:$sz, uimm1:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode Ty:$sz, (i32 uimm1:$sy)))]>; |
| let cy = 0, cz = 0 in |
| def mi : RR<opc, (outs RC:$sx), (ins mimm:$sz, uimm1:$sy), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set Ty:$sx, (OpNode (Ty mimm:$sz), (i32 uimm1:$sy)))]>; |
| } |
| |
| // Multiclass for CMOV instructions. |
| // e.g. CMOVL, CMOVW, CMOVD, and etc. |
| let Constraints = "$sx = $sd", DisableEncoding = "$sd", hasSideEffects = 0, |
| cfw = ? in |
| multiclass RRCMOVm<string opcStr, bits<8>opc, RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag, |
| Operand immOp = simm7> { |
| def rr : RR<opc, (outs I64:$sx), (ins CCOp:$cfw, RC:$sy, I64:$sz, I64:$sd), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set i64:$sx, (OpNode Ty:$sy, i64:$sz, i64:$sd, |
| (i32 CCOp:$cfw)))]>; |
| let cy = 0 in |
| def ir : RR<opc, (outs I64:$sx), |
| (ins CCOp:$cfw, immOp:$sy, I64:$sz, I64:$sd), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set i64:$sx, (OpNode (Ty immOp:$sy), i64:$sz, i64:$sd, |
| (i32 CCOp:$cfw)))]>; |
| let cz = 0 in |
| def rm : RR<opc, (outs I64:$sx), |
| (ins CCOp:$cfw, RC:$sy, mimm:$sz, I64:$sd), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set i64:$sx, (OpNode Ty:$sy, (i64 mimm:$sz), i64:$sd, |
| (i32 CCOp:$cfw)))]>; |
| let cy = 0, cz = 0 in |
| def im : RR<opc, (outs I64:$sx), |
| (ins CCOp:$cfw, immOp:$sy, mimm:$sz, I64:$sd), |
| !strconcat(opcStr, " $sx, $sz, $sy"), |
| [(set i64:$sx, (OpNode (Ty immOp:$sy), (i64 mimm:$sz), i64:$sd, |
| (i32 CCOp:$cfw)))]>; |
| } |
| |
| // Multiclass for floating point conversion instructions. |
| // e.g. CVTWDSX, CVTWDZX, CVTWSSX, and etc. |
| // sz{3-0} = rounding mode |
| let cz = 0, hasSideEffects = 0 in |
| multiclass CVTRDm<string opcStr, bits<8> opc, RegisterClass RCo, |
| RegisterClass RCi> { |
| def r : RR<opc, (outs RCo:$sx), (ins RDOp:$rd, RCi:$sy), |
| !strconcat(opcStr, "${rd} $sx, $sy")> { |
| bits<4> rd; |
| let sz{5-4} = 0; |
| let sz{3-0} = rd; |
| } |
| let cy = 0 in |
| def i : RR<opc, (outs RCo:$sx), (ins RDOp:$rd, simm7:$sy), |
| !strconcat(opcStr, "${rd} $sx, $sy")> { |
| bits<4> rd; |
| let sz{5-4} = 0; |
| let sz{3-0} = rd; |
| } |
| } |
| |
| // Multiclass for floating point conversion instructions. |
| // e.g. CVTDW, CVTSW, CVTDL, and etc. |
| let cz = 0, sz = 0, hasSideEffects = 0 in |
| multiclass CVTm<string opcStr, bits<8> opc, RegisterClass RCo, ValueType Tyo, |
| RegisterClass RCi, ValueType Tyi, |
| SDPatternOperator OpNode = null_frag> { |
| def r : RR<opc, (outs RCo:$sx), (ins RCi:$sy), |
| !strconcat(opcStr, " $sx, $sy"), |
| [(set Tyo:$sx, (OpNode Tyi:$sy))]>; |
| let cy = 0 in |
| def i : RR<opc, (outs RCo:$sx), (ins simm7:$sy), |
| !strconcat(opcStr, " $sx, $sy")>; |
| } |
| |
| // Multiclass for PFCH instructions. |
| // e.g. PFCH |
| let sx = 0, hasSideEffects = 0 in |
| multiclass PFCHm<string opcStr, bits<8>opc> { |
| def rri : RM<opc, (outs), (ins MEMrri:$addr), !strconcat(opcStr, " $addr"), |
| [(prefetch ADDRrri:$addr, imm, imm, (i32 1))]>; |
| let cy = 0 in |
| def rii : RM<opc, (outs), (ins MEMrii:$addr), !strconcat(opcStr, " $addr"), |
| [(prefetch ADDRrii:$addr, imm, imm, (i32 1))]>; |
| let cz = 0 in |
| def zri : RM<opc, (outs), (ins MEMzri:$addr), !strconcat(opcStr, " $addr"), |
| [(prefetch ADDRzri:$addr, imm, imm, (i32 1))]>; |
| let cy = 0, cz = 0 in |
| def zii : RM<opc, (outs), (ins MEMzii:$addr), !strconcat(opcStr, " $addr"), |
| [(prefetch ADDRzii:$addr, imm, imm, (i32 1))]>; |
| } |
| |
| // Multiclass for CAS instructions. |
| // e.g. TS1AML, TS1AMW, TS2AM, and etc. |
| let Constraints = "$dest = $sd", DisableEncoding = "$sd", |
| mayStore=1, mayLoad = 1, hasSideEffects = 0 in |
| multiclass RRCAStgm<string opcStr, bits<8>opc, RegisterClass RC, ValueType Ty, |
| Operand immOp, Operand MEM, ComplexPattern ADDR, |
| SDPatternOperator OpNode = null_frag> { |
| def r : RRM<opc, (outs RC:$dest), (ins MEM:$addr, RC:$sy, RC:$sd), |
| !strconcat(opcStr, " $dest, $addr, $sy"), |
| [(set Ty:$dest, (OpNode ADDR:$addr, Ty:$sy, Ty:$sd))]>; |
| let cy = 0 in |
| def i : RRM<opc, (outs RC:$dest), (ins MEM:$addr, immOp:$sy, RC:$sd), |
| !strconcat(opcStr, " $dest, $addr, $sy"), |
| [(set Ty:$dest, (OpNode ADDR:$addr, (Ty immOp:$sy), Ty:$sd))]>; |
| } |
| multiclass RRCASm<string opcStr, bits<8>opc, RegisterClass RC, ValueType Ty, |
| Operand immOp, SDPatternOperator OpNode = null_frag> { |
| defm ri : RRCAStgm<opcStr, opc, RC, Ty, immOp, MEMriRRM, ADDRri, OpNode>; |
| let cz = 0 in |
| defm zi : RRCAStgm<opcStr, opc, RC, Ty, immOp, MEMziRRM, ADDRzi, OpNode>; |
| } |
| |
| // Multiclass for branch instructions |
| // e.g. BCFL, BCFW, BCFD, and etc. |
| let isBranch = 1, isTerminator = 1, isIndirectBranch = 1, hasSideEffects = 0 in |
| multiclass BCbpfm<string opcStr, string cmpStr, bits<8> opc, dag cond, |
| Operand ADDR> { |
| let bpf = 0 /* NONE */ in |
| def "" : CF<opc, (outs), !con(cond, (ins ADDR:$addr)), |
| !strconcat(opcStr, " ", cmpStr, "$addr")>; |
| let bpf = 2 /* NOT TAKEN */ in |
| def _nt : CF<opc, (outs), !con(cond, (ins ADDR:$addr)), |
| !strconcat(opcStr, ".nt ", cmpStr, "$addr")>; |
| let bpf = 3 /* TAKEN */ in |
| def _t : CF<opc, (outs), !con(cond, (ins ADDR:$addr)), |
| !strconcat(opcStr, ".t ", cmpStr, "$addr")>; |
| } |
| multiclass BCtgm<string opcStr, string cmpStr, bits<8> opc, dag cond> { |
| defm ri : BCbpfm<opcStr, cmpStr, opc, cond, MEMriASX>; |
| let cz = 0 in defm zi : BCbpfm<opcStr, cmpStr, opc, cond, MEMziASX>; |
| } |
| multiclass BCm<string opcStr, string opcStrAt, string opcStrAf, bits<8> opc, |
| RegisterClass RC, Operand immOp> { |
| let DecoderMethod = "DecodeBranchCondition" in |
| defm r : BCtgm<opcStr, "$comp, ", opc, (ins CCOp:$cond, RC:$comp)>; |
| let DecoderMethod = "DecodeBranchCondition", cy = 0 in |
| defm i : BCtgm<opcStr, "$comp, ", opc, (ins CCOp:$cond, immOp:$comp)>; |
| let DecoderMethod = "DecodeBranchConditionAlways", cy = 0, sy = 0, |
| cf = 15 /* AT */, isBarrier = 1 in |
| defm a : BCtgm<opcStrAt, "", opc, (ins)>; |
| let DecoderMethod = "DecodeBranchConditionAlways", cy = 0, sy = 0, |
| cf = 0 /* AF */ in |
| defm na : BCtgm<opcStrAf, "", opc, (ins)>; |
| } |
| |
| // Multiclass for relative branch instructions |
| // e.g. BRCFL, BRCFW, BRCFD, and etc. |
| let isBranch = 1, isTerminator = 1, hasSideEffects = 0 in |
| multiclass BCRbpfm<string opcStr, string cmpStr, bits<8> opc, dag cond> { |
| let bpf = 0 /* NONE */ in |
| def "" : CF<opc, (outs), !con(cond, (ins brtarget32:$imm32)), |
| !strconcat(opcStr, " ", cmpStr, "$imm32")>; |
| let bpf = 2 /* NOT TAKEN */ in |
| def _nt : CF<opc, (outs), !con(cond, (ins brtarget32:$imm32)), |
| !strconcat(opcStr, ".nt ", cmpStr, "$imm32")>; |
| let bpf = 3 /* TAKEN */ in |
| def _t : CF<opc, (outs), !con(cond, (ins brtarget32:$imm32)), |
| !strconcat(opcStr, ".t ", cmpStr, "$imm32")>; |
| } |
| multiclass BCRm<string opcStr, string opcStrAt, string opcStrAf, bits<8> opc, |
| RegisterClass RC, Operand immOp, Operand zeroOp> { |
| defm rr : BCRbpfm<opcStr, "$sy, $sz, ", opc, (ins CCOp:$cf, RC:$sy, RC:$sz)>; |
| let cy = 0 in |
| defm ir : BCRbpfm<opcStr, "$sy, $sz, ", opc, (ins CCOp:$cf, immOp:$sy, |
| RC:$sz)>; |
| let cz = 0 in |
| defm rz : BCRbpfm<opcStr, "$sy, $sz, ", opc, (ins CCOp:$cf, RC:$sy, |
| zeroOp:$sz)>; |
| let cy = 0, cz = 0 in |
| defm iz : BCRbpfm<opcStr, "$sy, $sz, ", opc, (ins CCOp:$cf, immOp:$sy, |
| zeroOp:$sz)>; |
| let cy = 0, sy = 0, cz = 0, sz = 0, cf = 15 /* AT */, isBarrier = 1 in |
| defm a : BCRbpfm<opcStrAt, "", opc, (ins)>; |
| let cy = 0, sy = 0, cz = 0, sz = 0, cf = 0 /* AF */ in |
| defm na : BCRbpfm<opcStrAf, "", opc, (ins)>; |
| } |
| |
| // Multiclass for communication register instructions. |
| // e.g. LCR |
| let hasSideEffects = 1 in |
| multiclass LOADCRm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rr : RR<opc, (outs RC:$sx), (ins RC:$sy, RC:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0 in def ir : RR<opc, (outs RC:$sx), (ins simm7:$sy, RC:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cz = 0 in def rz : RR<opc, (outs RC:$sx), (ins RC:$sy, zero:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0, cz = 0 in |
| def iz : RR<opc, (outs RC:$sx), (ins simm7:$sy, zero:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| } |
| |
| // Multiclass for communication register instructions. |
| // e.g. SCR |
| let hasSideEffects = 1 in |
| multiclass STORECRm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rrr : RR<opc, (outs), (ins RC:$sy, RC:$sz, RC:$sx), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0 in def irr : RR<opc, (outs), (ins simm7:$sy, RC:$sz, RC:$sx), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cz = 0 in def rzr : RR<opc, (outs), (ins RC:$sy, zero:$sz, RC:$sx), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0, cz = 0 in |
| def izr : RR<opc, (outs), (ins simm7:$sy, zero:$sz, RC:$sx), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| } |
| |
| let hasSideEffects = 1, Constraints = "$sx = $sx_in", DisableEncoding = "$sx_in" in |
| multiclass TSCRm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def rrr : RR<opc, (outs RC:$sx), (ins RC:$sy, RC:$sz, RC:$sx_in), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0 in def irr : RR<opc, (outs RC:$sx), (ins simm7:$sy, RC:$sz, RC:$sx_in), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cz = 0 in def rzr : RR<opc, (outs RC:$sx), (ins RC:$sy, zero:$sz, RC:$sx_in), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0, cz = 0 in |
| def izr : RR<opc, (outs RC:$sx), (ins simm7:$sy, zero:$sz, RC:$sx_in), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| } |
| |
| |
| // Multiclass for communication register instructions. |
| // e.g. FIDCR |
| let cz = 0, hasSideEffects = 1 in |
| multiclass FIDCRm<string opcStr, bits<8>opc, RegisterClass RC> { |
| def ri : RR<opc, (outs RC:$sx), (ins RC:$sy, uimm3:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| let cy = 0 in def ii : RR<opc, (outs RC:$sx), (ins simm7:$sy, uimm3:$sz), |
| !strconcat(opcStr, " $sx, $sy, $sz")>; |
| } |
| |
| // Multiclass for LHM instruction. |
| let mayLoad = 1, hasSideEffects = 0 in |
| multiclass LHMm<string opcStr, bits<8> opc, RegisterClass RC> { |
| def ri : RRMHM<opc, (outs RC:$dest), (ins MEMriHM:$addr), |
| !strconcat(opcStr, " $dest, $addr")>; |
| let cz = 0 in |
| def zi : RRMHM<opc, (outs RC:$dest), (ins MEMziHM:$addr), |
| !strconcat(opcStr, " $dest, $addr")>; |
| } |
| |
| // Multiclass for SHM instruction. |
| let mayStore = 1, hasSideEffects = 0 in |
| multiclass SHMm<string opcStr, bits<8> opc, RegisterClass RC> { |
| def ri : RRMHM<opc, (outs), (ins MEMriHM:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr")>; |
| let cz = 0 in |
| def zi : RRMHM<opc, (outs), (ins MEMziHM:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr")>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Instructions |
| // |
| // Define all scalar instructions defined in SX-Aurora TSUBASA Architecture |
| // Guide here. As those mnemonics, we use mnemonics defined in Vector Engine |
| // Assembly Language Reference Manual. |
| //===----------------------------------------------------------------------===// |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.2 - Load/Store instructions |
| //----------------------------------------------------------------------------- |
| |
| // Multiclass for generic RM instructions |
| multiclass RMm<string opcStr, bits<8>opc, RegisterClass RC, bit MoveImm = 0> { |
| def rri : RM<opc, (outs RC:$dest), (ins MEMrri:$addr), |
| !strconcat(opcStr, " $dest, $addr"), []>; |
| let cy = 0 in |
| def rii : RM<opc, (outs RC:$dest), (ins MEMrii:$addr), |
| !strconcat(opcStr, " $dest, $addr"), []>; |
| let cz = 0 in |
| def zri : RM<opc, (outs RC:$dest), (ins MEMzri:$addr), |
| !strconcat(opcStr, " $dest, $addr"), []>; |
| let cy = 0, cz = 0 in |
| def zii : RM<opc, (outs RC:$dest), (ins MEMzii:$addr), |
| !strconcat(opcStr, " $dest, $addr"), []> { |
| // VE uses LEAzii and LEASLzii as a move immediate instruction, so declare |
| // it here. An instruction declared as MoveImm will be optimized in |
| // FoldImmediate later. |
| let isMoveImm = MoveImm; |
| } |
| } |
| |
| // Section 8.2.1 - LEA |
| let isReMaterializable = 1, isAsCheapAsAMove = 1, |
| DecoderMethod = "DecodeLoadI64" in { |
| let cx = 0 in defm LEA : RMm<"lea", 0x06, I64, /* MoveImm */ 1>; |
| let cx = 1 in defm LEASL : RMm<"lea.sl", 0x06, I64, /* MoveImm */ 1>; |
| } |
| |
| // LEA basic patterns. |
| // Need to be defined here to prioritize LEA over ADX. |
| def : Pat<(iPTR ADDRrri:$addr), (LEArri MEMrri:$addr)>; |
| def : Pat<(iPTR ADDRrii:$addr), (LEArii MEMrii:$addr)>; |
| def : Pat<(add I64:$base, simm32:$disp), (LEArii $base, 0, (LO32 $disp))>; |
| def : Pat<(add I64:$base, lozero:$disp), (LEASLrii $base, 0, (HI32 $disp))>; |
| |
| // Multiclass for load instructions. |
| let mayLoad = 1, hasSideEffects = 0 in |
| multiclass LOADm<string opcStr, bits<8> opc, RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag> { |
| def rri : RM<opc, (outs RC:$dest), (ins MEMrri:$addr), |
| !strconcat(opcStr, " $dest, $addr"), |
| [(set Ty:$dest, (OpNode ADDRrri:$addr))]>; |
| let cy = 0 in |
| def rii : RM<opc, (outs RC:$dest), (ins MEMrii:$addr), |
| !strconcat(opcStr, " $dest, $addr"), |
| [(set Ty:$dest, (OpNode ADDRrii:$addr))]>; |
| let cz = 0 in |
| def zri : RM<opc, (outs RC:$dest), (ins MEMzri:$addr), |
| !strconcat(opcStr, " $dest, $addr"), |
| [(set Ty:$dest, (OpNode ADDRzri:$addr))]>; |
| let cy = 0, cz = 0 in |
| def zii : RM<opc, (outs RC:$dest), (ins MEMzii:$addr), |
| !strconcat(opcStr, " $dest, $addr"), |
| [(set Ty:$dest, (OpNode ADDRzii:$addr))]>; |
| } |
| |
| // Section 8.2.2 - LDS |
| let DecoderMethod = "DecodeLoadI64" in |
| defm LD : LOADm<"ld", 0x01, I64, i64, load>; |
| def : Pat<(f64 (load ADDRrri:$addr)), (LDrri MEMrri:$addr)>; |
| def : Pat<(f64 (load ADDRrii:$addr)), (LDrii MEMrii:$addr)>; |
| def : Pat<(f64 (load ADDRzri:$addr)), (LDzri MEMzri:$addr)>; |
| def : Pat<(f64 (load ADDRzii:$addr)), (LDzii MEMzii:$addr)>; |
| |
| // Section 8.2.3 - LDU |
| let DecoderMethod = "DecodeLoadF32" in |
| defm LDU : LOADm<"ldu", 0x02, F32, f32, load>; |
| |
| // Section 8.2.4 - LDL |
| let DecoderMethod = "DecodeLoadI32" in |
| defm LDLSX : LOADm<"ldl.sx", 0x03, I32, i32, load>; |
| let cx = 1, DecoderMethod = "DecodeLoadI32" in |
| defm LDLZX : LOADm<"ldl.zx", 0x03, I32, i32, load>; |
| |
| // Section 8.2.5 - LD2B |
| let DecoderMethod = "DecodeLoadI32" in |
| defm LD2BSX : LOADm<"ld2b.sx", 0x04, I32, i32, sextloadi16>; |
| let cx = 1, DecoderMethod = "DecodeLoadI32" in |
| defm LD2BZX : LOADm<"ld2b.zx", 0x04, I32, i32, zextloadi16>; |
| |
| // Section 8.2.6 - LD1B |
| let DecoderMethod = "DecodeLoadI32" in |
| defm LD1BSX : LOADm<"ld1b.sx", 0x05, I32, i32, sextloadi8>; |
| let cx = 1, DecoderMethod = "DecodeLoadI32" in |
| defm LD1BZX : LOADm<"ld1b.zx", 0x05, I32, i32, zextloadi8>; |
| |
| // LDQ pseudo instructions |
| let mayLoad = 1, hasSideEffects = 0 in { |
| def LDQrii : Pseudo<(outs F128:$dest), (ins MEMrii:$addr), |
| "# pseudo ldq $dest, $addr", |
| [(set f128:$dest, (load ADDRrii:$addr))]>; |
| } |
| |
| // Multiclass for store instructions. |
| let mayStore = 1 in |
| multiclass STOREm<string opcStr, bits<8> opc, RegisterClass RC, ValueType Ty, |
| SDPatternOperator OpNode = null_frag> { |
| def rri : RM<opc, (outs), (ins MEMrri:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr"), |
| [(OpNode Ty:$sx, ADDRrri:$addr)]>; |
| let cy = 0 in |
| def rii : RM<opc, (outs), (ins MEMrii:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr"), |
| [(OpNode Ty:$sx, ADDRrii:$addr)]>; |
| let cz = 0 in |
| def zri : RM<opc, (outs), (ins MEMzri:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr"), |
| [(OpNode Ty:$sx, ADDRzri:$addr)]>; |
| let cy = 0, cz = 0 in |
| def zii : RM<opc, (outs), (ins MEMzii:$addr, RC:$sx), |
| !strconcat(opcStr, " $sx, $addr"), |
| [(OpNode Ty:$sx, ADDRzii:$addr)]>; |
| } |
| |
| // Section 8.2.7 - STS |
| let DecoderMethod = "DecodeStoreI64" in |
| defm ST : STOREm<"st", 0x11, I64, i64, store>; |
| def : Pat<(store f64:$src, ADDRrri:$addr), (STrri MEMrri:$addr, $src)>; |
| def : Pat<(store f64:$src, ADDRrii:$addr), (STrii MEMrii:$addr, $src)>; |
| def : Pat<(store f64:$src, ADDRzri:$addr), (STzri MEMzri:$addr, $src)>; |
| def : Pat<(store f64:$src, ADDRzii:$addr), (STzii MEMzii:$addr, $src)>; |
| |
| // Section 8.2.8 - STU |
| let DecoderMethod = "DecodeStoreF32" in |
| defm STU : STOREm<"stu", 0x12, F32, f32, store>; |
| |
| // Section 8.2.9 - STL |
| let DecoderMethod = "DecodeStoreI32" in |
| defm STL : STOREm<"stl", 0x13, I32, i32, store>; |
| |
| // Section 8.2.10 - ST2B |
| let DecoderMethod = "DecodeStoreI32" in |
| defm ST2B : STOREm<"st2b", 0x14, I32, i32, truncstorei16>; |
| |
| // Section 8.2.11 - ST1B |
| let DecoderMethod = "DecodeStoreI32" in |
| defm ST1B : STOREm<"st1b", 0x15, I32, i32, truncstorei8>; |
| |
| // STQ pseudo instructions |
| let mayStore = 1, hasSideEffects = 0 in { |
| def STQrii : Pseudo<(outs), (ins MEMrii:$addr, F128:$sx), |
| "# pseudo stq $sx, $addr", |
| [(store f128:$sx, ADDRrii:$addr)]>; |
| } |
| |
| // Section 8.2.12 - DLDS |
| let DecoderMethod = "DecodeLoadI64" in |
| defm DLD : LOADm<"dld", 0x09, I64, i64, load>; |
| |
| // Section 8.2.13 - DLDU |
| let DecoderMethod = "DecodeLoadF32" in |
| defm DLDU : LOADm<"dldu", 0x0a, F32, f32, load>; |
| |
| // Section 8.2.14 - DLDL |
| let DecoderMethod = "DecodeLoadI32" in |
| defm DLDLSX : LOADm<"dldl.sx", 0x0b, I32, i32, load>; |
| let cx = 1, DecoderMethod = "DecodeLoadI32" in |
| defm DLDLZX : LOADm<"dldl.zx", 0x0b, I32, i32, load>; |
| |
| // Section 8.2.15 - PFCH |
| let DecoderMethod = "DecodeASX" in |
| defm PFCH : PFCHm<"pfch", 0x0c>; |
| |
| // Section 8.2.16 - TS1AM (Test and Set 1 AM) |
| let DecoderMethod = "DecodeTS1AMI64" in |
| defm TS1AML : RRCASm<"ts1am.l", 0x42, I64, i64, uimm7>; |
| let DecoderMethod = "DecodeTS1AMI32", cx = 1 in |
| defm TS1AMW : RRCASm<"ts1am.w", 0x42, I32, i32, uimm7>; |
| |
| // Section 8.2.17 - TS2AM (Test and Set 2 AM) |
| let DecoderMethod = "DecodeTS1AMI64" in |
| defm TS2AM : RRCASm<"ts2am", 0x43, I64, i64, uimm7>; |
| |
| // Section 8.2.18 - TS3AM (Test and Set 3 AM) |
| let DecoderMethod = "DecodeTS1AMI64" in |
| defm TS3AM : RRCASm<"ts3am", 0x52, I64, i64, uimm1>; |
| |
| // Section 8.2.19 - ATMAM (Atomic AM) |
| let DecoderMethod = "DecodeTS1AMI64" in |
| defm ATMAM : RRCASm<"atmam", 0x53, I64, i64, uimm0to2>; |
| |
| // Section 8.2.20 - CAS (Compare and Swap) |
| let DecoderMethod = "DecodeCASI64" in |
| defm CASL : RRCASm<"cas.l", 0x62, I64, i64, simm7, atomic_cmp_swap_64>; |
| let DecoderMethod = "DecodeCASI32", cx = 1 in |
| defm CASW : RRCASm<"cas.w", 0x62, I32, i32, simm7, atomic_cmp_swap_32>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.3 - Transfer Control Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.3.1 - FENCE (Fence) |
| let hasSideEffects = 1 in { |
| let avo = 1 in def FENCEI : RRFENCE<0x20, (outs), (ins), "fencei">; |
| def FENCEM : RRFENCE<0x20, (outs), (ins uimm2:$kind), "fencem $kind"> { |
| bits<2> kind; |
| let lf = kind{1}; |
| let sf = kind{0}; |
| } |
| def FENCEC : RRFENCE<0x20, (outs), (ins uimm3:$kind), "fencec $kind"> { |
| bits<3> kind; |
| let c2 = kind{2}; |
| let c1 = kind{1}; |
| let c0 = kind{0}; |
| } |
| } |
| |
| // Section 8.3.2 - SVOB (Set Vector Out-of-order memory access Boundary) |
| let sx = 0, cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 1 in |
| def SVOB : RR<0x30, (outs), (ins), "svob">; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.4 - Fixed-point Operation Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.4.1 - ADD (Add) |
| defm ADDUL : RRm<"addu.l", 0x48, I64, i64>; |
| let cx = 1 in defm ADDUW : RRm<"addu.w", 0x48, I32, i32>; |
| |
| // Section 8.4.2 - ADS (Add Single) |
| defm ADDSWSX : RRm<"adds.w.sx", 0x4A, I32, i32, add>; |
| let cx = 1 in defm ADDSWZX : RRm<"adds.w.zx", 0x4A, I32, i32>; |
| |
| // Section 8.4.3 - ADX (Add) |
| defm ADDSL : RRm<"adds.l", 0x59, I64, i64, add>; |
| |
| // Section 8.4.4 - SUB (Subtract) |
| defm SUBUL : RRNCm<"subu.l", 0x58, I64, i64>; |
| let cx = 1 in defm SUBUW : RRNCm<"subu.w", 0x58, I32, i32>; |
| |
| // Section 8.4.5 - SBS (Subtract Single) |
| defm SUBSWSX : RRNCm<"subs.w.sx", 0x5A, I32, i32, sub>; |
| let cx = 1 in defm SUBSWZX : RRNCm<"subs.w.zx", 0x5A, I32, i32>; |
| |
| // Section 8.4.6 - SBX (Subtract) |
| defm SUBSL : RRNCm<"subs.l", 0x5B, I64, i64, sub>; |
| |
| // Section 8.4.7 - MPY (Multiply) |
| defm MULUL : RRm<"mulu.l", 0x49, I64, i64>; |
| let cx = 1 in defm MULUW : RRm<"mulu.w", 0x49, I32, i32>; |
| |
| // Section 8.4.8 - MPS (Multiply Single) |
| defm MULSWSX : RRm<"muls.w.sx", 0x4B, I32, i32, mul>; |
| let cx = 1 in defm MULSWZX : RRm<"muls.w.zx", 0x4B, I32, i32>; |
| |
| // Section 8.4.9 - MPX (Multiply) |
| defm MULSL : RRm<"muls.l", 0x6E, I64, i64, mul>; |
| |
| // Section 8.4.10 - MPD (Multiply) |
| defm MULSLW : RRbm<"muls.l.w", 0x6B, I64, i64, I32, i32>; |
| |
| // Section 8.4.11 - DIV (Divide) |
| defm DIVUL : RRNCm<"divu.l", 0x6F, I64, i64, udiv>; |
| let cx = 1 in defm DIVUW : RRNCm<"divu.w", 0x6F, I32, i32, udiv>; |
| |
| // Section 8.4.12 - DVS (Divide Single) |
| defm DIVSWSX : RRNCm<"divs.w.sx", 0x7B, I32, i32, sdiv>; |
| let cx = 1 in defm DIVSWZX : RRNCm<"divs.w.zx", 0x7B, I32, i32>; |
| |
| // Section 8.4.13 - DVX (Divide) |
| defm DIVSL : RRNCm<"divs.l", 0x7F, I64, i64, sdiv>; |
| |
| // Section 8.4.14 - CMP (Compare) |
| defm CMPUL : RRNCm<"cmpu.l", 0x55, I64, i64, cmpu>; |
| let cx = 1 in defm CMPUW : RRNCm<"cmpu.w", 0x55, I32, i32, cmpu>; |
| |
| // Section 8.4.15 - CPS (Compare Single) |
| defm CMPSWSX : RRNCm<"cmps.w.sx", 0x7A, I32, i32>; |
| let cx = 1 in defm CMPSWZX : RRNCm<"cmps.w.zx", 0x7A, I32, i32, cmpi>; |
| |
| // Section 8.4.16 - CPX (Compare) |
| defm CMPSL : RRNCm<"cmps.l", 0x6A, I64, i64, cmpi>; |
| |
| // Section 8.4.17 - CMS (Compare and Select Maximum/Minimum Single) |
| // cx: sx/zx, cw: max/min |
| defm MAXSWSX : RRm<"maxs.w.sx", 0x78, I32, i32, smax>; |
| let cx = 1 in defm MAXSWZX : RRm<"maxs.w.zx", 0x78, I32, i32>; |
| let cw = 1 in defm MINSWSX : RRm<"mins.w.sx", 0x78, I32, i32, smin>; |
| let cx = 1, cw = 1 in defm MINSWZX : RRm<"mins.w.zx", 0x78, I32, i32>; |
| |
| // Section 8.4.18 - CMX (Compare and Select Maximum/Minimum) |
| defm MAXSL : RRm<"maxs.l", 0x68, I64, i64, smax>; |
| let cw = 1 in defm MINSL : RRm<"mins.l", 0x68, I64, i64, smin>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.5 - Logical Operation Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.5.1 - AND (AND) |
| defm AND : RRm<"and", 0x44, I64, i64, and>; |
| |
| // Section 8.5.2 - OR (OR) |
| let isReMaterializable = 1, isAsCheapAsAMove = 1 in |
| defm OR : RRm<"or", 0x45, I64, i64, or, simm7, mimm, /* MoveImm */ 1>; |
| |
| // Section 8.5.3 - XOR (Exclusive OR) |
| defm XOR : RRm<"xor", 0x46, I64, i64, xor>; |
| |
| // Section 8.5.4 - EQV (Equivalence) |
| defm EQV : RRm<"eqv", 0x47, I64, i64>; |
| |
| // Section 8.5.5 - NND (Negate AND) |
| def and_not : PatFrags<(ops node:$x, node:$y), |
| [(and (not node:$x), node:$y)]>; |
| defm NND : RRNCm<"nnd", 0x54, I64, i64, and_not>; |
| |
| // Section 8.5.6 - MRG (Merge) |
| defm MRG : RRMRGm<"mrg", 0x56, I64>; |
| |
| // Section 8.5.7 - LDZ (Leading Zero Count) |
| def ctlz_pat : PatFrags<(ops node:$src), |
| [(ctlz node:$src), |
| (ctlz_zero_undef node:$src)]>; |
| defm LDZ : RRI1m<"ldz", 0x67, I64, i64, ctlz_pat>; |
| |
| // Section 8.5.8 - PCNT (Population Count) |
| defm PCNT : RRI1m<"pcnt", 0x38, I64, i64, ctpop>; |
| |
| // Section 8.5.9 - BRV (Bit Reverse) |
| defm BRV : RRI1m<"brv", 0x39, I64, i64, bitreverse>; |
| |
| // Section 8.5.10 - BSWP (Byte Swap) |
| defm BSWP : RRSWPm<"bswp", 0x2B, I64, i64>; |
| |
| def : Pat<(i64 (bswap i64:$src)), |
| (BSWPri $src, 0)>; |
| def : Pat<(i64 (bswap (i64 mimm:$src))), |
| (BSWPmi (MIMM $src), 0)>; |
| def : Pat<(i32 (bswap i32:$src)), |
| (EXTRACT_SUBREG |
| (BSWPri (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $src, sub_i32), 1), |
| sub_i32)>; |
| def : Pat<(i32 (bswap (i32 mimm:$src))), |
| (EXTRACT_SUBREG (BSWPmi (MIMM $src), 1), sub_i32)>; |
| |
| // Section 8.5.11 - CMOV (Conditional Move) |
| let cw = 0, cw2 = 0 in |
| defm CMOVL : RRCMOVm<"cmov.l.${cfw}", 0x3B, I64, i64, cmov>; |
| let cw = 1, cw2 = 0 in |
| defm CMOVW : RRCMOVm<"cmov.w.${cfw}", 0x3B, I32, i32, cmov>; |
| let cw = 0, cw2 = 1 in |
| defm CMOVD : RRCMOVm<"cmov.d.${cfw}", 0x3B, I64, f64, cmov, simm7fp>; |
| let cw = 1, cw2 = 1 in |
| defm CMOVS : RRCMOVm<"cmov.s.${cfw}", 0x3B, F32, f32, cmov, simm7fp>; |
| def : MnemonicAlias<"cmov.l", "cmov.l.at">; |
| def : MnemonicAlias<"cmov.w", "cmov.w.at">; |
| def : MnemonicAlias<"cmov.d", "cmov.d.at">; |
| def : MnemonicAlias<"cmov.s", "cmov.s.at">; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.6 - Shift Operation Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.6.1 - SLL (Shift Left Logical) |
| defm SLL : RRIm<"sll", 0x65, I64, i64, shl>; |
| |
| // Section 8.6.2 - SLD (Shift Left Double) |
| defm SLD : RRILDm<"sld", 0x64, I64>; |
| |
| // Section 8.6.3 - SRL (Shift Right Logical) |
| defm SRL : RRIm<"srl", 0x75, I64, i64, srl>; |
| |
| // Section 8.6.4 - SRD (Shift Right Double) |
| defm SRD : RRIRDm<"srd", 0x74, I64>; |
| |
| // Section 8.6.5 - SLA (Shift Left Arithmetic) |
| defm SLAWSX : RRIm<"sla.w.sx", 0x66, I32, i32, shl>; |
| let cx = 1 in defm SLAWZX : RRIm<"sla.w.zx", 0x66, I32, i32>; |
| |
| // Section 8.6.6 - SLAX (Shift Left Arithmetic) |
| defm SLAL : RRIm<"sla.l", 0x57, I64, i64>; |
| |
| // Section 8.6.7 - SRA (Shift Right Arithmetic) |
| defm SRAWSX : RRIm<"sra.w.sx", 0x76, I32, i32, sra>; |
| let cx = 1 in defm SRAWZX : RRIm<"sra.w.zx", 0x76, I32, i32>; |
| |
| // Section 8.6.8 - SRAX (Shift Right Arithmetic) |
| defm SRAL : RRIm<"sra.l", 0x77, I64, i64, sra>; |
| |
| def : Pat<(i32 (srl i32:$src, (i32 simm7:$val))), |
| (EXTRACT_SUBREG (SRLri (ANDrm (INSERT_SUBREG (i64 (IMPLICIT_DEF)), |
| $src, sub_i32), !add(32, 64)), imm:$val), sub_i32)>; |
| def : Pat<(i32 (srl i32:$src, i32:$val)), |
| (EXTRACT_SUBREG (SRLrr (ANDrm (INSERT_SUBREG (i64 (IMPLICIT_DEF)), |
| $src, sub_i32), !add(32, 64)), $val), sub_i32)>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.7 - Floating-point Arithmetic Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.7.1 - FAD (Floating Add) |
| defm FADDD : RRFm<"fadd.d", 0x4C, I64, f64, fadd>; |
| let cx = 1 in |
| defm FADDS : RRFm<"fadd.s", 0x4C, F32, f32, fadd, simm7fp, mimmfp32>; |
| |
| // Section 8.7.2 - FSB (Floating Subtract) |
| defm FSUBD : RRFm<"fsub.d", 0x5C, I64, f64, fsub>; |
| let cx = 1 in |
| defm FSUBS : RRFm<"fsub.s", 0x5C, F32, f32, fsub, simm7fp, mimmfp32>; |
| |
| // Section 8.7.3 - FMP (Floating Multiply) |
| defm FMULD : RRFm<"fmul.d", 0x4D, I64, f64, fmul>; |
| let cx = 1 in |
| defm FMULS : RRFm<"fmul.s", 0x4D, F32, f32, fmul, simm7fp, mimmfp32>; |
| |
| // Section 8.7.4 - FDV (Floating Divide) |
| defm FDIVD : RRFm<"fdiv.d", 0x5D, I64, f64, fdiv>; |
| let cx = 1 in |
| defm FDIVS : RRFm<"fdiv.s", 0x5D, F32, f32, fdiv, simm7fp, mimmfp32>; |
| |
| // Section 8.7.5 - FCP (Floating Compare) |
| defm FCMPD : RRFm<"fcmp.d", 0x7E, I64, f64, cmpf>; |
| let cx = 1 in |
| defm FCMPS : RRFm<"fcmp.s", 0x7E, F32, f32, cmpf, simm7fp, mimmfp32>; |
| |
| // Section 8.7.6 - CMS (Compare and Select Maximum/Minimum Single) |
| // cx: double/float, cw: max/min |
| let cw = 0, cx = 0 in |
| defm FMAXD : RRFm<"fmax.d", 0x3E, I64, f64, fmaxnum>; |
| let cw = 0, cx = 1 in |
| defm FMAXS : RRFm<"fmax.s", 0x3E, F32, f32, fmaxnum, simm7fp, mimmfp32>; |
| let cw = 1, cx = 0 in |
| defm FMIND : RRFm<"fmin.d", 0x3E, I64, f64, fminnum>; |
| let cw = 1, cx = 1 in |
| defm FMINS : RRFm<"fmin.s", 0x3E, F32, f32, fminnum, simm7fp, mimmfp32>; |
| |
| // Section 8.7.7 - FAQ (Floating Add Quadruple) |
| defm FADDQ : RRFm<"fadd.q", 0x6C, F128, f128, fadd>; |
| |
| // Section 8.7.8 - FSQ (Floating Subtract Quadruple) |
| defm FSUBQ : RRFm<"fsub.q", 0x7C, F128, f128, fsub>; |
| |
| // Section 8.7.9 - FMQ (Floating Subtract Quadruple) |
| defm FMULQ : RRFm<"fmul.q", 0x6D, F128, f128, fmul>; |
| |
| // Section 8.7.10 - FCQ (Floating Compare Quadruple) |
| defm FCMPQ : RRNCbm<"fcmp.q", 0x7D, I64, f64, F128, f128, cmpq, simm7fp, |
| mimmfp>; |
| |
| // Section 8.7.11 - FIX (Convert to Fixed Point) |
| // cx: double/float, cw: sx/zx, sz{0-3} = round |
| let cx = 0, cw = 0 /* sign extend */ in |
| defm CVTWDSX : CVTRDm<"cvt.w.d.sx", 0x4E, I32, I64>; |
| let cx = 0, cw = 1 /* zero extend */ in |
| defm CVTWDZX : CVTRDm<"cvt.w.d.zx", 0x4E, I32, I64>; |
| let cx = 1, cw = 0 /* sign extend */ in |
| defm CVTWSSX : CVTRDm<"cvt.w.s.sx", 0x4E, I32, F32>; |
| let cx = 1, cw = 1 /* zero extend */ in |
| defm CVTWSZX : CVTRDm<"cvt.w.s.zx", 0x4E, I32, F32>; |
| |
| // Section 8.7.12 - FIXX (Convert to Fixed Point) |
| defm CVTLD : CVTRDm<"cvt.l.d", 0x4F, I64, I64>; |
| |
| // Section 8.7.13 - FLT (Convert to Floating Point) |
| defm CVTDW : CVTm<"cvt.d.w", 0x5E, I64, f64, I32, i32, sint_to_fp>; |
| let cx = 1 in |
| defm CVTSW : CVTm<"cvt.s.w", 0x5E, F32, f32, I32, i32, sint_to_fp>; |
| |
| // Section 8.7.14 - FLTX (Convert to Floating Point) |
| defm CVTDL : CVTm<"cvt.d.l", 0x5F, I64, f64, I64, i64, sint_to_fp>; |
| |
| // Section 8.7.15 - CVS (Convert to Single-format) |
| defm CVTSD : CVTm<"cvt.s.d", 0x1F, F32, f32, I64, f64, fpround>; |
| let cx = 1 in |
| defm CVTSQ : CVTm<"cvt.s.q", 0x1F, F32, f32, F128, f128, fpround>; |
| |
| // Section 8.7.16 - CVD (Convert to Double-format) |
| defm CVTDS : CVTm<"cvt.d.s", 0x0F, I64, f64, F32, f32, fpextend>; |
| let cx = 1 in |
| defm CVTDQ : CVTm<"cvt.d.q", 0x0F, I64, f64, F128, f128, fpround>; |
| |
| // Section 8.7.17 - CVQ (Convert to Single-format) |
| defm CVTQD : CVTm<"cvt.q.d", 0x2D, F128, f128, I64, f64, fpextend>; |
| let cx = 1 in |
| defm CVTQS : CVTm<"cvt.q.s", 0x2D, F128, f128, F32, f32, fpextend>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.8 - Branch instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.8.1 - BC (Branch on Codition) |
| defm BCFL : BCm<"b${cond}.l", "b.l", "baf.l", 0x19, I64, simm7>; |
| |
| // Indirect branch aliases |
| def : Pat<(brind I64:$reg), (BCFLari_t $reg, 0)>; |
| def : Pat<(brind tblockaddress:$imm), (BCFLazi_t 0, $imm)>; |
| |
| // Return instruction is a special case of jump. |
| let Uses = [SX10], bpf = 3 /* TAKEN */, cf = 15 /* AT */, cy = 0, sy = 0, |
| sz = 10 /* SX10 */, imm32 = 0, isReturn = 1, isTerminator = 1, |
| isBarrier = 1, isCodeGenOnly = 1, hasSideEffects = 0 in |
| def RET : CF<0x19, (outs), (ins), "b.l.t (, %s10)", [(retflag)]>; |
| |
| // Section 8.8.2 - BCS (Branch on Condition Single) |
| defm BCFW : BCm<"b${cond}.w", "b.w", "baf.w", 0x1B, I32, simm7>; |
| |
| // Section 8.8.3 - BCF (Branch on Condition Floating Point) |
| defm BCFD : BCm<"b${cond}.d", "b.d", "baf.d", 0x1C, I64, simm7fp>; |
| let cx = 1 in |
| defm BCFS : BCm<"b${cond}.s", "b.s", "baf.s", 0x1C, F32, simm7fp>; |
| |
| // Section 8.8.4 - BCR (Branch on Condition Relative) |
| let cx = 0, cx2 = 0 in |
| defm BRCFL : BCRm<"br${cf}.l", "br.l", "braf.l", 0x18, I64, simm7, zero>; |
| let cx = 1, cx2 = 0 in |
| defm BRCFW : BCRm<"br${cf}.w", "br.w", "braf.w", 0x18, I32, simm7, zero>; |
| let cx = 0, cx2 = 1 in |
| defm BRCFD : BCRm<"br${cf}.d", "br.d", "braf.d", 0x18, I64, simm7fp, zerofp>; |
| let cx = 1, cx2 = 1 in |
| defm BRCFS : BCRm<"br${cf}.s", "br.s", "braf.s", 0x18, F32, simm7fp, zerofp>; |
| |
| // Section 8.8.5 - BSIC (Branch and Save IC) |
| let isCall = 1, hasSideEffects = 0, DecoderMethod = "DecodeCall" in |
| defm BSIC : RMm<"bsic", 0x08, I64>; |
| |
| // Call instruction is a special case of BSIC. |
| let Defs = [SX10], sx = 10 /* SX10 */, cy = 0, sy = 0, imm32 = 0, |
| isCall = 1, isCodeGenOnly = 1, hasSideEffects = 0 in |
| def CALLr : RM<0x08, (outs), (ins I64:$sz, variable_ops), |
| "bsic %s10, (, $sz)", [(call i64:$sz)]>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.19 - Control Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.19.1 - SIC (Save Instruction Counter) |
| let cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 1, Uses = [IC] in |
| def SIC : RR<0x28, (outs I32:$sx), (ins), "sic $sx">; |
| |
| // Section 8.19.2 - LPM (Load Program Mode Flags) |
| let sx = 0, cz = 0, sz = 0, hasSideEffects = 1, Defs = [PSW] in |
| def LPM : RR<0x3a, (outs), (ins I64:$sy), "lpm $sy">; |
| |
| // Section 8.19.3 - SPM (Save Program Mode Flags) |
| let cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 1, Uses = [PSW] in |
| def SPM : RR<0x2a, (outs I64:$sx), (ins), "spm $sx">; |
| |
| // Section 8.19.4 - LFR (Load Flag Register) |
| let sx = 0, cz = 0, sz = 0, hasSideEffects = 1, Defs = [PSW] in { |
| def LFRr : RR<0x69, (outs), (ins I64:$sy), "lfr $sy">; |
| let cy = 0 in def LFRi : RR<0x69, (outs), (ins uimm6:$sy), "lfr $sy">; |
| } |
| |
| // Section 8.19.5 - SFR (Save Flag Register) |
| let cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 1, Uses = [PSW] in |
| def SFR : RR<0x29, (outs I64:$sx), (ins), "sfr $sx">; |
| |
| // Section 8.19.6 - SMIR (Save Miscellaneous Register) |
| let cy = 0, cz = 0, sz = 0, hasSideEffects = 1 in { |
| def SMIR : RR<0x22, (outs I64:$sx), (ins MISC:$sy), "smir $sx, $sy">; |
| } |
| |
| // Section 8.19.7 - NOP (No Operation) |
| let sx = 0, cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 0 in |
| def NOP : RR<0x79, (outs), (ins), "nop">; |
| |
| // Section 8.19.8 - MONC (Monitor Call) |
| let sx = 0, cy = 0, sy = 0, cz = 0, sz = 0, hasSideEffects = 1 in { |
| def MONC : RR<0x3F, (outs), (ins), "monc">; |
| let cx = 1, isTrap = 1 in def MONCHDB : RR<0x3F, (outs), (ins), "monc.hdb">; |
| } |
| |
| // Section 8.19.9 - LCR (Load Communication Register) |
| defm LCR : LOADCRm<"lcr", 0x40, I64>; |
| |
| // Section 8.19.10 - SCR (Save Communication Register) |
| defm SCR : STORECRm<"scr", 0x50, I64>; |
| |
| // Section 8.19.11 - TSCR (Test & Set Communication Register) |
| defm TSCR : TSCRm<"tscr", 0x41, I64>; |
| |
| // Section 8.19.12 - FIDCR (Fetch & Increment/Decrement CR) |
| defm FIDCR : FIDCRm<"fidcr", 0x51, I64>; |
| |
| //----------------------------------------------------------------------------- |
| // Section 8.20 - Host Memory Access Instructions |
| //----------------------------------------------------------------------------- |
| |
| // Section 8.20.1 - LHM (Load Host Memory) |
| let ry = 3, DecoderMethod = "DecodeLoadASI64" in |
| defm LHML : LHMm<"lhm.l", 0x21, I64>; |
| let ry = 2, DecoderMethod = "DecodeLoadASI64" in |
| defm LHMW : LHMm<"lhm.w", 0x21, I64>; |
| let ry = 1, DecoderMethod = "DecodeLoadASI64" in |
| defm LHMH : LHMm<"lhm.h", 0x21, I64>; |
| let ry = 0, DecoderMethod = "DecodeLoadASI64" in |
| defm LHMB : LHMm<"lhm.b", 0x21, I64>; |
| |
| // Section 8.20.2 - SHM (Store Host Memory) |
| let ry = 3, DecoderMethod = "DecodeStoreASI64" in |
| defm SHML : SHMm<"shm.l", 0x31, I64>; |
| let ry = 2, DecoderMethod = "DecodeStoreASI64" in |
| defm SHMW : SHMm<"shm.w", 0x31, I64>; |
| let ry = 1, DecoderMethod = "DecodeStoreASI64" in |
| defm SHMH : SHMm<"shm.h", 0x31, I64>; |
| let ry = 0, DecoderMethod = "DecodeStoreASI64" in |
| defm SHMB : SHMm<"shm.b", 0x31, I64>; |
| |
| //===----------------------------------------------------------------------===// |
| // Instructions for CodeGenOnly |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Pattern Matchings |
| //===----------------------------------------------------------------------===// |
| |
| // Basic cast between registers. This is often used in ISel patterns, so make |
| // them as OutPatFrag. |
| def i2l : OutPatFrag<(ops node:$exp), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $exp, sub_i32)>; |
| def l2i : OutPatFrag<(ops node:$exp), |
| (EXTRACT_SUBREG $exp, sub_i32)>; |
| def f2l : OutPatFrag<(ops node:$exp), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $exp, sub_f32)>; |
| def l2f : OutPatFrag<(ops node:$exp), |
| (EXTRACT_SUBREG $exp, sub_f32)>; |
| |
| // Zero out subregisters. |
| def zero_i32 : OutPatFrag<(ops node:$expr), |
| (ANDrm $expr, 32)>; |
| def zero_f32 : OutPatFrag<(ops node:$expr), |
| (ANDrm $expr, !add(32, 64))>; |
| |
| // Small immediates. |
| def : Pat<(i32 simm7:$val), (l2i (ORim (LO7 $val), 0))>; |
| def : Pat<(i64 simm7:$val), (ORim (LO7 $val), 0)>; |
| // Medium immediates. |
| def : Pat<(i32 simm32:$val), (l2i (LEAzii 0, 0, (LO32 $val)))>; |
| def : Pat<(i64 simm32:$val), (LEAzii 0, 0, (LO32 $val))>; |
| def : Pat<(i64 uimm32:$val), (zero_f32 (LEAzii 0, 0, (LO32 $val)))>; |
| // Arbitrary immediates. |
| def : Pat<(i64 lozero:$val), |
| (LEASLzii 0, 0, (HI32 imm:$val))>; |
| def : Pat<(i64 lomsbzero:$val), |
| (LEASLrii (LEAzii 0, 0, (LO32 imm:$val)), 0, (HI32 imm:$val))>; |
| def : Pat<(i64 imm:$val), |
| (LEASLrii (ANDrm (LEAzii 0, 0, (LO32 imm:$val)), !add(32, 64)), 0, |
| (HI32 imm:$val))>; |
| |
| // LEA patterns |
| def lea_add : PatFrags<(ops node:$base, node:$idx, node:$disp), |
| [(add (add node:$base, node:$idx), node:$disp), |
| (add (add node:$base, node:$disp), node:$idx), |
| (add node:$base, (add $idx, $disp))]>; |
| def : Pat<(lea_add I64:$base, simm7:$idx, simm32:$disp), |
| (LEArii $base, (LO7 $idx), (LO32 $disp))>; |
| def : Pat<(lea_add I64:$base, I64:$idx, simm32:$disp), |
| (LEArri $base, $idx, (LO32 $disp))>; |
| def : Pat<(lea_add I64:$base, simm7:$idx, lozero:$disp), |
| (LEASLrii $base, (LO7 $idx), (HI32 $disp))>; |
| def : Pat<(lea_add I64:$base, I64:$idx, lozero:$disp), |
| (LEASLrri $base, $idx, (HI32 $disp))>; |
| |
| // Address calculation patterns and optimizations |
| // |
| // Generate following instructions: |
| // 1. LEA %reg, label@LO32 |
| // AND %reg, %reg, (32)0 |
| // 2. LEASL %reg, label@HI32 |
| // 3. (LEA %reg, label@LO32) |
| // (AND %reg, %reg, (32)0) |
| // LEASL %reg, label@HI32(, %reg) |
| // 4. (LEA %reg, label@LO32) |
| // (AND %reg, %reg, (32)0) |
| // LEASL %reg, label@HI32(%reg, %got) |
| // |
| def velo_only : OutPatFrag<(ops node:$lo), |
| (ANDrm (LEAzii 0, 0, $lo), !add(32, 64))>; |
| def vehi_only : OutPatFrag<(ops node:$hi), |
| (LEASLzii 0, 0, $hi)>; |
| def vehi_lo : OutPatFrag<(ops node:$hi, node:$lo), |
| (LEASLrii $lo, 0, $hi)>; |
| def vehi_lo_imm : OutPatFrag<(ops node:$hi, node:$lo, node:$idx), |
| (LEASLrii $lo, $idx, $hi)>; |
| def vehi_baselo : OutPatFrag<(ops node:$base, node:$hi, node:$lo), |
| (LEASLrri $base, $lo, $hi)>; |
| foreach type = [ "tblockaddress", "tconstpool", "texternalsym", "tglobaladdr", |
| "tglobaltlsaddr", "tjumptable" ] in { |
| def : Pat<(VElo !cast<SDNode>(type):$lo), (velo_only $lo)>; |
| def : Pat<(VEhi !cast<SDNode>(type):$hi), (vehi_only $hi)>; |
| def : Pat<(add (VEhi !cast<SDNode>(type):$hi), I64:$lo), (vehi_lo $hi, $lo)>; |
| def : Pat<(add (add (VEhi !cast<SDNode>(type):$hi), I64:$lo), simm7:$val), |
| (vehi_lo_imm $hi, $lo, (LO7 $val))>; |
| def : Pat<(add I64:$base, (add (VEhi !cast<SDNode>(type):$hi), I64:$lo)), |
| (vehi_baselo $base, $hi, $lo)>; |
| } |
| |
| // floating point |
| def : Pat<(f32 fpimm:$val), |
| (EXTRACT_SUBREG (LEASLzii 0, 0, (HIFP32 $val)), sub_f32)>; |
| def : Pat<(f64 fplozero:$val), |
| (LEASLzii 0, 0, (HIFP32 $val))>; |
| def : Pat<(f64 fplomsbzero:$val), |
| (LEASLrii (LEAzii 0, 0, (LOFP32 $val)), 0, (HIFP32 $val))>; |
| def : Pat<(f64 fpimm:$val), |
| (LEASLrii (ANDrm (LEAzii 0, 0, (LOFP32 $val)), !add(32, 64)), 0, |
| (HIFP32 $val))>; |
| |
| // The same integer registers are used for i32 and i64 values. |
| // When registers hold i32 values, the high bits are unused. |
| |
| // TODO Use standard expansion for shift-based lowering of sext_inreg |
| |
| // Cast to i1 |
| def : Pat<(sext_inreg I32:$src, i1), |
| (SRAWSXri (SLAWSXri $src, 31), 31)>; |
| def : Pat<(sext_inreg I64:$src, i1), |
| (SRALri (SLLri $src, 63), 63)>; |
| |
| // Cast to i8 |
| def : Pat<(sext_inreg I32:$src, i8), |
| (SRAWSXri (SLAWSXri $src, 24), 24)>; |
| def : Pat<(sext_inreg I64:$src, i8), |
| (SRALri (SLLri $src, 56), 56)>; |
| def : Pat<(sext_inreg (i32 (trunc i64:$src)), i8), |
| (EXTRACT_SUBREG (SRALri (SLLri $src, 56), 56), sub_i32)>; |
| def : Pat<(i32 (and (trunc i64:$src), 0xff)), |
| (EXTRACT_SUBREG (ANDrm $src, !add(56, 64)), sub_i32)>; |
| |
| // Cast to i16 |
| def : Pat<(sext_inreg I32:$src, i16), |
| (SRAWSXri (SLAWSXri $src, 16), 16)>; |
| def : Pat<(sext_inreg I64:$src, i16), |
| (SRALri (SLLri $src, 48), 48)>; |
| def : Pat<(sext_inreg (i32 (trunc i64:$src)), i16), |
| (EXTRACT_SUBREG (SRALri (SLLri $src, 48), 48), sub_i32)>; |
| def : Pat<(i32 (and (trunc i64:$src), 0xffff)), |
| (EXTRACT_SUBREG (ANDrm $src, !add(48, 64)), sub_i32)>; |
| |
| // Cast to i32 |
| def : Pat<(i32 (trunc i64:$src)), (l2i (zero_f32 $src))>; |
| def : Pat<(i32 (fp_to_sint f32:$src)), (CVTWSSXr RD_RZ, $src)>; |
| def : Pat<(i32 (fp_to_sint f64:$src)), (CVTWDSXr RD_RZ, $src)>; |
| def : Pat<(i32 (fp_to_sint f128:$src)), (CVTWDSXr RD_RZ, (CVTDQr $src))>; |
| |
| // Cast to i64 |
| def : Pat<(sext_inreg i64:$src, i32), (i2l (ADDSWSXrm (l2i $src), 0))>; |
| def : Pat<(i64 (sext i32:$src)), (i2l (ADDSWSXrm $src, 0))>; |
| def : Pat<(i64 (zext i32:$src)), (i2l (ADDSWZXrm $src, 0))>; |
| def : Pat<(i64 (anyext i32:$sy)), (i2l $sy)>; |
| def : Pat<(i64 (fp_to_sint f32:$src)), (CVTLDr RD_RZ, (CVTDSr $src))>; |
| def : Pat<(i64 (fp_to_sint f64:$src)), (CVTLDr RD_RZ, $src)>; |
| def : Pat<(i64 (fp_to_sint f128:$src)), (CVTLDr RD_RZ, (CVTDQr $src))>; |
| |
| // Cast to f32 |
| def : Pat<(f32 (sint_to_fp i64:$src)), (CVTSDr (CVTDLr i64:$src))>; |
| |
| // Cast to f128 |
| def : Pat<(f128 (sint_to_fp i32:$src)), (CVTQDr (CVTDWr $src))>; |
| def : Pat<(f128 (sint_to_fp i64:$src)), (CVTQDr (CVTDLr $src))>; |
| |
| |
| // extload, sextload and zextload stuff |
| multiclass EXT64m<SDPatternOperator from, |
| RM torri, |
| RM torii, |
| RM tozri, |
| RM tozii> { |
| def : Pat<(i64 (from ADDRrri:$addr)), |
| (i2l (torri MEMrri:$addr))>; |
| def : Pat<(i64 (from ADDRrii:$addr)), |
| (i2l (torii MEMrii:$addr))>; |
| def : Pat<(i64 (from ADDRzri:$addr)), |
| (i2l (tozri MEMzri:$addr))>; |
| def : Pat<(i64 (from ADDRzii:$addr)), |
| (i2l (tozii MEMzii:$addr))>; |
| } |
| defm : EXT64m<sextloadi8, LD1BSXrri, LD1BSXrii, LD1BSXzri, LD1BSXzii>; |
| defm : EXT64m<zextloadi8, LD1BZXrri, LD1BZXrii, LD1BZXzri, LD1BZXzii>; |
| defm : EXT64m<extloadi8, LD1BZXrri, LD1BZXrii, LD1BZXzri, LD1BZXzii>; |
| defm : EXT64m<sextloadi16, LD2BSXrri, LD2BSXrii, LD2BSXzri, LD2BSXzii>; |
| defm : EXT64m<zextloadi16, LD2BZXrri, LD2BZXrii, LD2BZXzri, LD2BZXzii>; |
| defm : EXT64m<extloadi16, LD2BZXrri, LD2BZXrii, LD2BZXzri, LD2BZXzii>; |
| defm : EXT64m<sextloadi32, LDLSXrri, LDLSXrii, LDLSXzri, LDLSXzii>; |
| defm : EXT64m<zextloadi32, LDLZXrri, LDLZXrii, LDLZXzri, LDLZXzii>; |
| defm : EXT64m<extloadi32, LDLSXrri, LDLSXrii, LDLSXzri, LDLSXzii>; |
| |
| // anyextload |
| multiclass EXT32m<SDPatternOperator from, |
| RM torri, |
| RM torii, |
| RM tozri, |
| RM tozii> { |
| def : Pat<(from ADDRrri:$addr), (torri MEMrri:$addr)>; |
| def : Pat<(from ADDRrii:$addr), (torii MEMrii:$addr)>; |
| def : Pat<(from ADDRzri:$addr), (tozri MEMzri:$addr)>; |
| def : Pat<(from ADDRzii:$addr), (tozii MEMzii:$addr)>; |
| } |
| defm : EXT32m<extloadi8, LD1BZXrri, LD1BZXrii, LD1BZXzri, LD1BZXzii>; |
| defm : EXT32m<extloadi16, LD2BZXrri, LD2BZXrii, LD2BZXzri, LD2BZXzii>; |
| |
| // truncstore |
| multiclass TRUNC64m<SDPatternOperator from, |
| RM torri, |
| RM torii, |
| RM tozri, |
| RM tozii> { |
| def : Pat<(from i64:$src, ADDRrri:$addr), |
| (torri MEMrri:$addr, (l2i $src))>; |
| def : Pat<(from i64:$src, ADDRrii:$addr), |
| (torii MEMrii:$addr, (l2i $src))>; |
| def : Pat<(from i64:$src, ADDRzri:$addr), |
| (tozri MEMzri:$addr, (l2i $src))>; |
| def : Pat<(from i64:$src, ADDRzii:$addr), |
| (tozii MEMzii:$addr, (l2i $src))>; |
| } |
| defm : TRUNC64m<truncstorei8, ST1Brri, ST1Brii, ST1Bzri, ST1Bzii>; |
| defm : TRUNC64m<truncstorei16, ST2Brri, ST2Brii, ST2Bzri, ST2Bzii>; |
| defm : TRUNC64m<truncstorei32, STLrri, STLrii, STLzri, ST1Bzii>; |
| |
| // Atomic loads |
| multiclass ATMLDm<SDPatternOperator from, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(from ADDRrri:$addr), (torri MEMrri:$addr)>; |
| def : Pat<(from ADDRrii:$addr), (torii MEMrii:$addr)>; |
| def : Pat<(from ADDRzri:$addr), (tozri MEMzri:$addr)>; |
| def : Pat<(from ADDRzii:$addr), (tozii MEMzii:$addr)>; |
| } |
| defm : ATMLDm<atomic_load_8, LD1BZXrri, LD1BZXrii, LD1BZXzri, LD1BZXzii>; |
| defm : ATMLDm<atomic_load_16, LD2BZXrri, LD2BZXrii, LD2BZXzri, LD2BZXzii>; |
| defm : ATMLDm<atomic_load_32, LDLZXrri, LDLZXrii, LDLZXzri, LDLZXzii>; |
| defm : ATMLDm<atomic_load_64, LDrri, LDrii, LDzri, LDzii>; |
| |
| // Optimized atomic loads with sext |
| multiclass SXATMLDm<SDPatternOperator from, ValueType TY, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(i64 (sext_inreg (i64 (anyext (from ADDRrri:$addr))), TY)), |
| (i2l (torri MEMrri:$addr))>; |
| def : Pat<(i64 (sext_inreg (i64 (anyext (from ADDRrii:$addr))), TY)), |
| (i2l (torii MEMrii:$addr))>; |
| def : Pat<(i64 (sext_inreg (i64 (anyext (from ADDRzri:$addr))), TY)), |
| (i2l (tozri MEMzri:$addr))>; |
| def : Pat<(i64 (sext_inreg (i64 (anyext (from ADDRzii:$addr))), TY)), |
| (i2l (tozii MEMzii:$addr))>; |
| } |
| multiclass SXATMLD32m<SDPatternOperator from, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(i64 (sext (from ADDRrri:$addr))), |
| (i2l (torri MEMrri:$addr))>; |
| def : Pat<(i64 (sext (from ADDRrii:$addr))), |
| (i2l (torii MEMrii:$addr))>; |
| def : Pat<(i64 (sext (from ADDRzri:$addr))), |
| (i2l (tozri MEMzri:$addr))>; |
| def : Pat<(i64 (sext (from ADDRzii:$addr))), |
| (i2l (tozii MEMzii:$addr))>; |
| } |
| defm : SXATMLDm<atomic_load_8, i8, LD1BSXrri, LD1BSXrii, LD1BSXzri, LD1BSXzii>; |
| defm : SXATMLDm<atomic_load_16, i16, LD2BSXrri, LD2BSXrii, LD2BSXzri, |
| LD2BSXzii>; |
| defm : SXATMLD32m<atomic_load_32, LDLSXrri, LDLSXrii, LDLSXzri, LDLSXzii>; |
| |
| // Optimized atomic loads with zext |
| multiclass ZXATMLDm<SDPatternOperator from, int VAL, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(i64 (and (anyext (from ADDRrri:$addr)), VAL)), |
| (i2l (torri MEMrri:$addr))>; |
| def : Pat<(i64 (and (anyext (from ADDRrii:$addr)), VAL)), |
| (i2l (torii MEMrii:$addr))>; |
| def : Pat<(i64 (and (anyext (from ADDRzri:$addr)), VAL)), |
| (i2l (tozri MEMzri:$addr))>; |
| def : Pat<(i64 (and (anyext (from ADDRzii:$addr)), VAL)), |
| (i2l (tozii MEMzii:$addr))>; |
| } |
| multiclass ZXATMLD32m<SDPatternOperator from, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(i64 (zext (from ADDRrri:$addr))), |
| (i2l (torri MEMrri:$addr))>; |
| def : Pat<(i64 (zext (from ADDRrii:$addr))), |
| (i2l (torii MEMrii:$addr))>; |
| def : Pat<(i64 (zext (from ADDRzri:$addr))), |
| (i2l (tozri MEMzri:$addr))>; |
| def : Pat<(i64 (zext (from ADDRzii:$addr))), |
| (i2l (tozii MEMzii:$addr))>; |
| } |
| defm : ZXATMLDm<atomic_load_8, 0xFF, LD1BZXrri, LD1BZXrii, LD1BZXzri, |
| LD1BZXzii>; |
| defm : ZXATMLDm<atomic_load_16, 0xFFFF, LD2BZXrri, LD2BZXrii, LD2BZXzri, |
| LD2BZXzii>; |
| defm : ZXATMLD32m<atomic_load_32, LDLZXrri, LDLZXrii, LDLZXzri, LDLZXzii>; |
| |
| // Atomic stores |
| multiclass ATMSTm<SDPatternOperator from, ValueType ty, |
| RM torri, RM torii, |
| RM tozri, RM tozii> { |
| def : Pat<(from ADDRrri:$addr, ty:$src), (torri MEMrri:$addr, $src)>; |
| def : Pat<(from ADDRrii:$addr, ty:$src), (torii MEMrii:$addr, $src)>; |
| def : Pat<(from ADDRzri:$addr, ty:$src), (tozri MEMzri:$addr, $src)>; |
| def : Pat<(from ADDRzii:$addr, ty:$src), (tozii MEMzii:$addr, $src)>; |
| } |
| defm : ATMSTm<atomic_store_8, i32, ST1Brri, ST1Brii, ST1Bzri, ST1Bzii>; |
| defm : ATMSTm<atomic_store_16, i32, ST2Brri, ST2Brii, ST2Bzri, ST2Bzii>; |
| defm : ATMSTm<atomic_store_32, i32, STLrri, STLrii, STLzri, STLzii>; |
| defm : ATMSTm<atomic_store_64, i64, STrri, STrii, STzri, STzii>; |
| |
| // Optimized atomic stores with truncate |
| multiclass TRATMSTm<SDPatternOperator from, |
| RM torri, |
| RM torii, |
| RM tozri, |
| RM tozii> { |
| def : Pat<(from ADDRrri:$addr, (i32 (trunc i64:$src))), |
| (torri MEMrri:$addr, (l2i $src))>; |
| def : Pat<(from ADDRrii:$addr, (i32 (trunc i64:$src))), |
| (torii MEMrii:$addr, (l2i $src))>; |
| def : Pat<(from ADDRzri:$addr, (i32 (trunc i64:$src))), |
| (tozri MEMzri:$addr, (l2i $src))>; |
| def : Pat<(from ADDRzii:$addr, (i32 (trunc i64:$src))), |
| (tozii MEMzii:$addr, (l2i $src))>; |
| } |
| defm : TRATMSTm<atomic_store_8, ST1Brri, ST1Brii, ST1Bzri, ST1Bzii>; |
| defm : TRATMSTm<atomic_store_16, ST2Brri, ST2Brii, ST2Bzri, ST2Bzii>; |
| defm : TRATMSTm<atomic_store_32, STLrri, STLrii, STLzri, STLzii>; |
| |
| // Atomic swaps |
| def : Pat<(i32 (ts1am i64:$src, i32:$flag, i32:$new)), |
| (TS1AMWrir $src, 0, $flag, $new)>; |
| def : Pat<(i32 (atomic_swap_32 ADDRri:$src, i32:$new)), |
| (TS1AMWrii MEMriRRM:$src, 15, $new)>; |
| def : Pat<(i64 (atomic_swap_64 ADDRri:$src, i64:$new)), |
| (TS1AMLrir MEMriRRM:$src, (LEAzii 0, 0, 255), i64:$new)>; |
| |
| //===----------------------------------------------------------------------===// |
| // SJLJ Exception handling patterns |
| //===----------------------------------------------------------------------===// |
| |
| let hasSideEffects = 1, isBarrier = 1, isCodeGenOnly = 1, |
| usesCustomInserter = 1 in { |
| let isTerminator = 1 in |
| def EH_SjLj_LongJmp : Pseudo<(outs), (ins I64:$buf), |
| "# EH_SJLJ_LONGJMP", |
| [(VEeh_sjlj_longjmp I64:$buf)]>; |
| |
| def EH_SjLj_SetJmp : Pseudo<(outs I32:$dst), (ins I64:$buf), |
| "# EH_SJLJ_SETJMP", |
| [(set I32:$dst, (VEeh_sjlj_setjmp I64:$buf))]>; |
| |
| def EH_SjLj_Setup_Dispatch : Pseudo<(outs), (ins), "# EH_SJLJ_SETUP_DISPATCH", |
| [(VEeh_sjlj_setup_dispatch)]>; |
| } |
| |
| let isTerminator = 1, isBranch = 1, isCodeGenOnly = 1 in |
| def EH_SjLj_Setup : Pseudo<(outs), (ins brtarget32:$dst), |
| "# EH_SJlJ_SETUP $dst">; |
| |
| //===----------------------------------------------------------------------===// |
| // Branch related patterns |
| //===----------------------------------------------------------------------===// |
| |
| // Branches |
| def : Pat<(br bb:$addr), (BRCFLa bb:$addr)>; |
| |
| // brcc |
| // integer brcc |
| multiclass BRCCIm<ValueType ty, CF BrOpNode1, |
| CF BrOpNode2, |
| RR CmpOpNode1, |
| RR CmpOpNode2> { |
| def : Pat<(brcc CCSIOp:$cond, ty:$l, simm7:$r, bb:$addr), |
| (BrOpNode2 (icond2ccSwap $cond), (LO7 $r), $l, bb:$addr)>; |
| def : Pat<(brcc CCSIOp:$cond, ty:$l, ty:$r, bb:$addr), |
| (BrOpNode1 (icond2cc $cond), $l, $r, bb:$addr)>; |
| def : Pat<(brcc CCUIOp:$cond, ty:$l, simm7:$r, bb:$addr), |
| (BrOpNode2 (icond2cc $cond), 0, (CmpOpNode2 (LO7 $r), $l), |
| bb:$addr)>; |
| def : Pat<(brcc CCUIOp:$cond, ty:$l, ty:$r, bb:$addr), |
| (BrOpNode2 (icond2cc $cond), 0, (CmpOpNode1 $r, $l), bb:$addr)>; |
| } |
| defm : BRCCIm<i32, BRCFWrr, BRCFWir, CMPUWrr, CMPUWir>; |
| defm : BRCCIm<i64, BRCFLrr, BRCFLir, CMPULrr, CMPULir>; |
| |
| // floating point brcc |
| multiclass BRCCFm<ValueType ty, CF BrOpNode1, CF BrOpNode2> { |
| def : Pat<(brcc cond:$cond, ty:$l, simm7fp:$r, bb:$addr), |
| (BrOpNode2 (fcond2ccSwap $cond), (LO7FP $r), $l, bb:$addr)>; |
| def : Pat<(brcc cond:$cond, ty:$l, ty:$r, bb:$addr), |
| (BrOpNode1 (fcond2cc $cond), $l, $r, bb:$addr)>; |
| } |
| defm : BRCCFm<f32, BRCFSrr, BRCFSir>; |
| defm : BRCCFm<f64, BRCFDrr, BRCFDir>; |
| def : Pat<(brcc cond:$cond, f128:$l, f128:$r, bb:$addr), |
| (BRCFDir (fcond2cc $cond), 0, (FCMPQrr $r, $l), bb:$addr)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Pseudo Instructions |
| //===----------------------------------------------------------------------===// |
| |
| // GETGOT for PIC |
| let Defs = [SX15 /* %got */, SX16 /* %plt */], hasSideEffects = 0 in { |
| def GETGOT : Pseudo<(outs getGOT:$getpcseq), (ins), "$getpcseq">; |
| } |
| |
| // GETFUNPLT for PIC |
| let hasSideEffects = 0 in |
| def GETFUNPLT : Pseudo<(outs I64:$dst), (ins i64imm:$addr), |
| "$dst, $addr", |
| [(set iPTR:$dst, (GetFunPLT tglobaladdr:$addr))] >; |
| |
| def : Pat<(GetFunPLT tglobaladdr:$dst), |
| (GETFUNPLT tglobaladdr:$dst)>; |
| def : Pat<(GetFunPLT texternalsym:$dst), |
| (GETFUNPLT texternalsym:$dst)>; |
| |
| // GETTLSADDR for TLS |
| let Defs = [SX0, SX10, SX12], hasSideEffects = 0 in |
| def GETTLSADDR : Pseudo<(outs), (ins i64imm:$addr), |
| "# GETTLSADDR $addr", |
| [(GetTLSAddr tglobaltlsaddr:$addr)] >; |
| |
| def : Pat<(GetTLSAddr tglobaltlsaddr:$dst), |
| (GETTLSADDR tglobaltlsaddr:$dst)>; |
| |
| let Defs = [SX11], Uses = [SX11], hasSideEffects = 0 in { |
| def ADJCALLSTACKDOWN : Pseudo<(outs), (ins i64imm:$amt, i64imm:$amt2), |
| "# ADJCALLSTACKDOWN $amt, $amt2", |
| [(callseq_start timm:$amt, timm:$amt2)]>; |
| def ADJCALLSTACKUP : Pseudo<(outs), (ins i64imm:$amt1, i64imm:$amt2), |
| "# ADJCALLSTACKUP $amt1", |
| [(callseq_end timm:$amt1, timm:$amt2)]>; |
| } |
| |
| let Defs = [SX8], Uses = [SX8, SX11], hasSideEffects = 0 in |
| def EXTEND_STACK : Pseudo<(outs), (ins), |
| "# EXTEND STACK", |
| []>; |
| let hasSideEffects = 0 in |
| def EXTEND_STACK_GUARD : Pseudo<(outs), (ins), |
| "# EXTEND STACK GUARD", |
| []>; |
| |
| // Dynamic stack allocation yields a __llvm_grow_stack for VE targets. |
| // These calls are needed to probe the stack when allocating more over |
| // %s8 (%sl - stack limit). |
| |
| let Uses = [SX11], hasSideEffects = 1 in |
| def GETSTACKTOP : Pseudo<(outs I64:$dst), (ins), |
| "# GET STACK TOP", |
| [(set iPTR:$dst, (GetStackTop))]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Other patterns |
| //===----------------------------------------------------------------------===// |
| |
| // SETCC pattern matches |
| // |
| // CMP %tmp, lhs, rhs ; compare lhs and rhs |
| // or %res, 0, (0)1 ; initialize by 0 |
| // CMOV %res, (63)0, %tmp ; set 1 if %tmp is true |
| |
| class setccrr<Instruction INSN> : |
| OutPatFrag<(ops node:$cond, node:$comp), |
| (EXTRACT_SUBREG |
| (INSN $cond, $comp, |
| !add(63, 64), // means (63)0 == 1 |
| (ORim 0, 0)), sub_i32)>; |
| |
| def : Pat<(i32 (setcc i32:$l, i32:$r, CCSIOp:$cond)), |
| (setccrr<CMOVWrm> (icond2cc $cond), (CMPSWSXrr $l, $r))>; |
| def : Pat<(i32 (setcc i32:$l, i32:$r, CCUIOp:$cond)), |
| (setccrr<CMOVWrm> (icond2cc $cond), (CMPUWrr $l, $r))>; |
| def : Pat<(i32 (setcc i64:$l, i64:$r, CCSIOp:$cond)), |
| (setccrr<CMOVLrm> (icond2cc $cond), (CMPSLrr $l, $r))>; |
| def : Pat<(i32 (setcc i64:$l, i64:$r, CCUIOp:$cond)), |
| (setccrr<CMOVLrm> (icond2cc $cond), (CMPULrr $l, $r))>; |
| def : Pat<(i32 (setcc f32:$l, f32:$r, cond:$cond)), |
| (setccrr<CMOVSrm> (fcond2cc $cond), (FCMPSrr $l, $r))>; |
| def : Pat<(i32 (setcc f64:$l, f64:$r, cond:$cond)), |
| (setccrr<CMOVDrm> (fcond2cc $cond), (FCMPDrr $l, $r))>; |
| def : Pat<(i32 (setcc f128:$l, f128:$r, cond:$cond)), |
| (setccrr<CMOVDrm> (fcond2cc $cond), (FCMPQrr $l, $r))>; |
| |
| // Generic CMOV pattern matches |
| // CMOV accepts i64 $t, $f, and result. So, we extend it to support |
| // i32/f32/f64/f128 $t, $f, and result. |
| |
| // CMOV for i32 |
| multiclass CMOVI32m<ValueType TY, string Insn> { |
| def : Pat<(i32 (cmov TY:$cmp, i32:$t, i32:$f, (i32 CCOp:$cond))), |
| (EXTRACT_SUBREG |
| (!cast<Instruction>(Insn#"rr") (CCOP $cond), $cmp, |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $t, sub_i32), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $f, sub_i32)), |
| sub_i32)>; |
| def : Pat<(i32 (cmov TY:$cmp, (i32 mimm:$t), i32:$f, (i32 CCOp:$cond))), |
| (EXTRACT_SUBREG |
| (!cast<Instruction>(Insn#"rm") (CCOP $cond), $cmp, |
| (MIMM $t), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $f, sub_i32)), |
| sub_i32)>; |
| } |
| defm : CMOVI32m<i64, "CMOVL">; |
| defm : CMOVI32m<i32, "CMOVW">; |
| defm : CMOVI32m<f64, "CMOVD">; |
| defm : CMOVI32m<f32, "CMOVS">; |
| |
| // CMOV for f32 |
| multiclass CMOVF32m<ValueType TY, string Insn> { |
| def : Pat<(f32 (cmov TY:$cmp, f32:$t, f32:$f, (i32 CCOp:$cond))), |
| (EXTRACT_SUBREG |
| (!cast<Instruction>(Insn#"rr") |
| (CCOP $cond), $cmp, |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $t, sub_f32), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $f, sub_f32)), |
| sub_f32)>; |
| def : Pat<(f32 (cmov TY:$cmp, (f32 mimmfp:$t), f32:$f, (i32 CCOp:$cond))), |
| (EXTRACT_SUBREG |
| (!cast<Instruction>(Insn#"rm") |
| (CCOP $cond), $cmp, (MIMMFP $t), |
| (INSERT_SUBREG (i64 (IMPLICIT_DEF)), $f, sub_f32)), |
| sub_f32)>; |
| } |
| defm : CMOVF32m<i64, "CMOVL">; |
| defm : CMOVF32m<i32, "CMOVW">; |
| defm : CMOVF32m<f64, "CMOVD">; |
| defm : CMOVF32m<f32, "CMOVS">; |
| |
| // CMOV for f64 |
| multiclass CMOVF64m<ValueType TY, string Insn> { |
| def : Pat<(f64 (cmov TY:$cmp, f64:$t, f64:$f, (i32 CCOp:$cond))), |
| (!cast<Instruction>(Insn#"rr") (CCOP $cond), $cmp, $t, $f)>; |
| def : Pat<(f64 (cmov TY:$cmp, (f64 mimmfp:$t), f64:$f, (i32 CCOp:$cond))), |
| (!cast<Instruction>(Insn#"rm") (CCOP $cond), $cmp, (MIMMFP $t), |
| $f)>; |
| } |
| defm : CMOVF64m<i64, "CMOVL">; |
| defm : CMOVF64m<i32, "CMOVW">; |
| defm : CMOVF64m<f64, "CMOVD">; |
| defm : CMOVF64m<f32, "CMOVS">; |
| |
| // CMOV for f128 |
| multiclass CMOVF128m<ValueType TY, string Insn> { |
| def : Pat<(f128 (cmov TY:$cmp, f128:$t, f128:$f, (i32 CCOp:$cond))), |
| (INSERT_SUBREG |
| (INSERT_SUBREG (f128 (IMPLICIT_DEF)), |
| (!cast<Instruction>(Insn#"rr") (CCOP $cond), $cmp, |
| (EXTRACT_SUBREG $t, sub_odd), |
| (EXTRACT_SUBREG $f, sub_odd)), sub_odd), |
| (!cast<Instruction>(Insn#"rr") (CCOP $cond), $cmp, |
| (EXTRACT_SUBREG $t, sub_even), |
| (EXTRACT_SUBREG $f, sub_even)), sub_even)>; |
| } |
| defm : CMOVF128m<i64, "CMOVL">; |
| defm : CMOVF128m<i32, "CMOVW">; |
| defm : CMOVF128m<f64, "CMOVD">; |
| defm : CMOVF128m<f32, "CMOVS">; |
| |
| // bitconvert |
| def : Pat<(f64 (bitconvert i64:$src)), (COPY_TO_REGCLASS $src, I64)>; |
| def : Pat<(i64 (bitconvert f64:$src)), (COPY_TO_REGCLASS $src, I64)>; |
| |
| def : Pat<(i32 (bitconvert f32:$op)), (l2i (SRALri (f2l $op), 32))>; |
| def : Pat<(f32 (bitconvert i32:$op)), (l2f (SLLri (i2l $op), 32))>; |
| |
| //===----------------------------------------------------------------------===// |
| // Vector Instruction Pattern Stuff |
| //===----------------------------------------------------------------------===// |
| |
| // Custom intermediate ISDs. |
| class IsVLVT<int OpIdx> : SDTCisVT<OpIdx,i32>; |
| def vec_broadcast : SDNode<"VEISD::VEC_BROADCAST", SDTypeProfile<1, 2, |
| [SDTCisVec<0>, IsVLVT<2>]>>; |
| |
| ///// Packed mode Support ///// |
| // unpack the lo part of this vector |
| def vec_unpack_lo : SDNode<"VEISD::VEC_UNPACK_LO", SDTypeProfile<1, 2, |
| [SDTCisVec<0>, SDTCisVec<1>, IsVLVT<2>]>>; |
| // unpack the hipart of this vector |
| def vec_unpack_hi : SDNode<"VEISD::VEC_UNPACK_HI", SDTypeProfile<1, 2, |
| [SDTCisVec<0>, SDTCisVec<1>, IsVLVT<2>]>>; |
| // re-pack v256i32, v256f32 back into tone v512.32 |
| def vec_pack : SDNode<"VEISD::VEC_PACK", SDTypeProfile<1, 3, |
| [SDTCisVec<0>, SDTCisVec<1>, SDTCisVec<2>, |
| SDTCisSameNumEltsAs<1,2>, IsVLVT<3>]>>; |
| |
| // replicate lower 32bit to upper 32bit (f32 scalar replication). |
| def repl_f32 : SDNode<"VEISD::REPL_F32", |
| SDTypeProfile<1, 1, |
| [SDTCisInt<0>, SDTCisFP<1>]>>; |
| // replicate upper 32bit to lower 32 bit (i32 scalar replication). |
| def repl_i32 : SDNode<"VEISD::REPL_I32", |
| SDTypeProfile<1, 1, |
| [SDTCisInt<0>, SDTCisInt<1>]>>; |
| |
| |
| // Whether this is an all-true mask (assuming undef-bits above VL are all-true). |
| def true_mask : PatLeaf< |
| (vec_broadcast (i32 nonzero), (i32 srcvalue))>; |
| // Match any broadcast (ignoring VL). |
| def any_broadcast : PatFrag<(ops node:$sx), |
| (vec_broadcast node:$sx, (i32 srcvalue))>; |
| |
| // Vector instructions. |
| include "VEInstrVec.td" |
| |
| // The vevlintrin |
| include "VEInstrIntrinsicVL.td" |
| |
| // Patterns and intermediate SD nodes (VEC_*). |
| include "VEInstrPatternsVec.td" |
| |
| // Patterns and intermediate SD nodes (VVP_*). |
| include "VVPInstrPatternsVec.td" |