| //===- LiveIntervals.cpp - Live Interval Analysis -------------------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| /// \file This file implements the LiveInterval analysis pass which is used |
| /// by the Linear Scan Register allocator. This pass linearizes the |
| /// basic blocks of the function in DFS order and computes live intervals for |
| /// each virtual and physical register. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/CodeGen/LiveIntervals.h" |
| #include "llvm/ADT/ArrayRef.h" |
| #include "llvm/ADT/DepthFirstIterator.h" |
| #include "llvm/ADT/SmallPtrSet.h" |
| #include "llvm/ADT/SmallVector.h" |
| #include "llvm/ADT/iterator_range.h" |
| #include "llvm/Analysis/AliasAnalysis.h" |
| #include "llvm/CodeGen/LiveInterval.h" |
| #include "llvm/CodeGen/LiveRangeCalc.h" |
| #include "llvm/CodeGen/LiveVariables.h" |
| #include "llvm/CodeGen/MachineBasicBlock.h" |
| #include "llvm/CodeGen/MachineBlockFrequencyInfo.h" |
| #include "llvm/CodeGen/MachineDominators.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineInstr.h" |
| #include "llvm/CodeGen/MachineInstrBundle.h" |
| #include "llvm/CodeGen/MachineOperand.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/Passes.h" |
| #include "llvm/CodeGen/SlotIndexes.h" |
| #include "llvm/CodeGen/TargetRegisterInfo.h" |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" |
| #include "llvm/CodeGen/VirtRegMap.h" |
| #include "llvm/Config/llvm-config.h" |
| #include "llvm/MC/LaneBitmask.h" |
| #include "llvm/MC/MCRegisterInfo.h" |
| #include "llvm/Pass.h" |
| #include "llvm/Support/BlockFrequency.h" |
| #include "llvm/Support/CommandLine.h" |
| #include "llvm/Support/Compiler.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/MathExtras.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include <algorithm> |
| #include <cassert> |
| #include <cstdint> |
| #include <iterator> |
| #include <tuple> |
| #include <utility> |
| |
| using namespace llvm; |
| |
| #define DEBUG_TYPE "regalloc" |
| |
| char LiveIntervals::ID = 0; |
| char &llvm::LiveIntervalsID = LiveIntervals::ID; |
| INITIALIZE_PASS_BEGIN(LiveIntervals, "liveintervals", |
| "Live Interval Analysis", false, false) |
| INITIALIZE_PASS_DEPENDENCY(AAResultsWrapperPass) |
| INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree) |
| INITIALIZE_PASS_DEPENDENCY(SlotIndexes) |
| INITIALIZE_PASS_END(LiveIntervals, "liveintervals", |
| "Live Interval Analysis", false, false) |
| |
| #ifndef NDEBUG |
| static cl::opt<bool> EnablePrecomputePhysRegs( |
| "precompute-phys-liveness", cl::Hidden, |
| cl::desc("Eagerly compute live intervals for all physreg units.")); |
| #else |
| static bool EnablePrecomputePhysRegs = false; |
| #endif // NDEBUG |
| |
| namespace llvm { |
| |
| cl::opt<bool> UseSegmentSetForPhysRegs( |
| "use-segment-set-for-physregs", cl::Hidden, cl::init(true), |
| cl::desc( |
| "Use segment set for the computation of the live ranges of physregs.")); |
| |
| } // end namespace llvm |
| |
| void LiveIntervals::getAnalysisUsage(AnalysisUsage &AU) const { |
| AU.setPreservesCFG(); |
| AU.addRequired<AAResultsWrapperPass>(); |
| AU.addPreserved<AAResultsWrapperPass>(); |
| AU.addPreserved<LiveVariables>(); |
| AU.addPreservedID(MachineLoopInfoID); |
| AU.addRequiredTransitiveID(MachineDominatorsID); |
| AU.addPreservedID(MachineDominatorsID); |
| AU.addPreserved<SlotIndexes>(); |
| AU.addRequiredTransitive<SlotIndexes>(); |
| MachineFunctionPass::getAnalysisUsage(AU); |
| } |
| |
| LiveIntervals::LiveIntervals() : MachineFunctionPass(ID) { |
| initializeLiveIntervalsPass(*PassRegistry::getPassRegistry()); |
| } |
| |
| LiveIntervals::~LiveIntervals() { |
| delete LRCalc; |
| } |
| |
| void LiveIntervals::releaseMemory() { |
| // Free the live intervals themselves. |
| for (unsigned i = 0, e = VirtRegIntervals.size(); i != e; ++i) |
| delete VirtRegIntervals[Register::index2VirtReg(i)]; |
| VirtRegIntervals.clear(); |
| RegMaskSlots.clear(); |
| RegMaskBits.clear(); |
| RegMaskBlocks.clear(); |
| |
| for (LiveRange *LR : RegUnitRanges) |
| delete LR; |
| RegUnitRanges.clear(); |
| |
| // Release VNInfo memory regions, VNInfo objects don't need to be dtor'd. |
| VNInfoAllocator.Reset(); |
| } |
| |
| bool LiveIntervals::runOnMachineFunction(MachineFunction &fn) { |
| MF = &fn; |
| MRI = &MF->getRegInfo(); |
| TRI = MF->getSubtarget().getRegisterInfo(); |
| TII = MF->getSubtarget().getInstrInfo(); |
| AA = &getAnalysis<AAResultsWrapperPass>().getAAResults(); |
| Indexes = &getAnalysis<SlotIndexes>(); |
| DomTree = &getAnalysis<MachineDominatorTree>(); |
| |
| if (!LRCalc) |
| LRCalc = new LiveRangeCalc(); |
| |
| // Allocate space for all virtual registers. |
| VirtRegIntervals.resize(MRI->getNumVirtRegs()); |
| |
| computeVirtRegs(); |
| computeRegMasks(); |
| computeLiveInRegUnits(); |
| |
| if (EnablePrecomputePhysRegs) { |
| // For stress testing, precompute live ranges of all physical register |
| // units, including reserved registers. |
| for (unsigned i = 0, e = TRI->getNumRegUnits(); i != e; ++i) |
| getRegUnit(i); |
| } |
| LLVM_DEBUG(dump()); |
| return true; |
| } |
| |
| void LiveIntervals::print(raw_ostream &OS, const Module* ) const { |
| OS << "********** INTERVALS **********\n"; |
| |
| // Dump the regunits. |
| for (unsigned Unit = 0, UnitE = RegUnitRanges.size(); Unit != UnitE; ++Unit) |
| if (LiveRange *LR = RegUnitRanges[Unit]) |
| OS << printRegUnit(Unit, TRI) << ' ' << *LR << '\n'; |
| |
| // Dump the virtregs. |
| for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) { |
| unsigned Reg = Register::index2VirtReg(i); |
| if (hasInterval(Reg)) |
| OS << getInterval(Reg) << '\n'; |
| } |
| |
| OS << "RegMasks:"; |
| for (SlotIndex Idx : RegMaskSlots) |
| OS << ' ' << Idx; |
| OS << '\n'; |
| |
| printInstrs(OS); |
| } |
| |
| void LiveIntervals::printInstrs(raw_ostream &OS) const { |
| OS << "********** MACHINEINSTRS **********\n"; |
| MF->print(OS, Indexes); |
| } |
| |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) |
| LLVM_DUMP_METHOD void LiveIntervals::dumpInstrs() const { |
| printInstrs(dbgs()); |
| } |
| #endif |
| |
| LiveInterval* LiveIntervals::createInterval(unsigned reg) { |
| float Weight = Register::isPhysicalRegister(reg) ? huge_valf : 0.0F; |
| return new LiveInterval(reg, Weight); |
| } |
| |
| /// Compute the live interval of a virtual register, based on defs and uses. |
| bool LiveIntervals::computeVirtRegInterval(LiveInterval &LI) { |
| assert(LRCalc && "LRCalc not initialized."); |
| assert(LI.empty() && "Should only compute empty intervals."); |
| LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator()); |
| LRCalc->calculate(LI, MRI->shouldTrackSubRegLiveness(LI.reg)); |
| return computeDeadValues(LI, nullptr); |
| } |
| |
| void LiveIntervals::computeVirtRegs() { |
| for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) { |
| unsigned Reg = Register::index2VirtReg(i); |
| if (MRI->reg_nodbg_empty(Reg)) |
| continue; |
| LiveInterval &LI = createEmptyInterval(Reg); |
| bool NeedSplit = computeVirtRegInterval(LI); |
| if (NeedSplit) { |
| SmallVector<LiveInterval*, 8> SplitLIs; |
| splitSeparateComponents(LI, SplitLIs); |
| } |
| } |
| } |
| |
| void LiveIntervals::computeRegMasks() { |
| RegMaskBlocks.resize(MF->getNumBlockIDs()); |
| |
| // Find all instructions with regmask operands. |
| for (const MachineBasicBlock &MBB : *MF) { |
| std::pair<unsigned, unsigned> &RMB = RegMaskBlocks[MBB.getNumber()]; |
| RMB.first = RegMaskSlots.size(); |
| |
| // Some block starts, such as EH funclets, create masks. |
| if (const uint32_t *Mask = MBB.getBeginClobberMask(TRI)) { |
| RegMaskSlots.push_back(Indexes->getMBBStartIdx(&MBB)); |
| RegMaskBits.push_back(Mask); |
| } |
| |
| for (const MachineInstr &MI : MBB) { |
| for (const MachineOperand &MO : MI.operands()) { |
| if (!MO.isRegMask()) |
| continue; |
| RegMaskSlots.push_back(Indexes->getInstructionIndex(MI).getRegSlot()); |
| RegMaskBits.push_back(MO.getRegMask()); |
| } |
| } |
| |
| // Some block ends, such as funclet returns, create masks. Put the mask on |
| // the last instruction of the block, because MBB slot index intervals are |
| // half-open. |
| if (const uint32_t *Mask = MBB.getEndClobberMask(TRI)) { |
| assert(!MBB.empty() && "empty return block?"); |
| RegMaskSlots.push_back( |
| Indexes->getInstructionIndex(MBB.back()).getRegSlot()); |
| RegMaskBits.push_back(Mask); |
| } |
| |
| // Compute the number of register mask instructions in this block. |
| RMB.second = RegMaskSlots.size() - RMB.first; |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Register Unit Liveness |
| //===----------------------------------------------------------------------===// |
| // |
| // Fixed interference typically comes from ABI boundaries: Function arguments |
| // and return values are passed in fixed registers, and so are exception |
| // pointers entering landing pads. Certain instructions require values to be |
| // present in specific registers. That is also represented through fixed |
| // interference. |
| // |
| |
| /// Compute the live range of a register unit, based on the uses and defs of |
| /// aliasing registers. The range should be empty, or contain only dead |
| /// phi-defs from ABI blocks. |
| void LiveIntervals::computeRegUnitRange(LiveRange &LR, unsigned Unit) { |
| assert(LRCalc && "LRCalc not initialized."); |
| LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator()); |
| |
| // The physregs aliasing Unit are the roots and their super-registers. |
| // Create all values as dead defs before extending to uses. Note that roots |
| // may share super-registers. That's OK because createDeadDefs() is |
| // idempotent. It is very rare for a register unit to have multiple roots, so |
| // uniquing super-registers is probably not worthwhile. |
| bool IsReserved = false; |
| for (MCRegUnitRootIterator Root(Unit, TRI); Root.isValid(); ++Root) { |
| bool IsRootReserved = true; |
| for (MCSuperRegIterator Super(*Root, TRI, /*IncludeSelf=*/true); |
| Super.isValid(); ++Super) { |
| unsigned Reg = *Super; |
| if (!MRI->reg_empty(Reg)) |
| LRCalc->createDeadDefs(LR, Reg); |
| // A register unit is considered reserved if all its roots and all their |
| // super registers are reserved. |
| if (!MRI->isReserved(Reg)) |
| IsRootReserved = false; |
| } |
| IsReserved |= IsRootReserved; |
| } |
| assert(IsReserved == MRI->isReservedRegUnit(Unit) && |
| "reserved computation mismatch"); |
| |
| // Now extend LR to reach all uses. |
| // Ignore uses of reserved registers. We only track defs of those. |
| if (!IsReserved) { |
| for (MCRegUnitRootIterator Root(Unit, TRI); Root.isValid(); ++Root) { |
| for (MCSuperRegIterator Super(*Root, TRI, /*IncludeSelf=*/true); |
| Super.isValid(); ++Super) { |
| unsigned Reg = *Super; |
| if (!MRI->reg_empty(Reg)) |
| LRCalc->extendToUses(LR, Reg); |
| } |
| } |
| } |
| |
| // Flush the segment set to the segment vector. |
| if (UseSegmentSetForPhysRegs) |
| LR.flushSegmentSet(); |
| } |
| |
| /// Precompute the live ranges of any register units that are live-in to an ABI |
| /// block somewhere. Register values can appear without a corresponding def when |
| /// entering the entry block or a landing pad. |
| void LiveIntervals::computeLiveInRegUnits() { |
| RegUnitRanges.resize(TRI->getNumRegUnits()); |
| LLVM_DEBUG(dbgs() << "Computing live-in reg-units in ABI blocks.\n"); |
| |
| // Keep track of the live range sets allocated. |
| SmallVector<unsigned, 8> NewRanges; |
| |
| // Check all basic blocks for live-ins. |
| for (const MachineBasicBlock &MBB : *MF) { |
| // We only care about ABI blocks: Entry + landing pads. |
| if ((&MBB != &MF->front() && !MBB.isEHPad()) || MBB.livein_empty()) |
| continue; |
| |
| // Create phi-defs at Begin for all live-in registers. |
| SlotIndex Begin = Indexes->getMBBStartIdx(&MBB); |
| LLVM_DEBUG(dbgs() << Begin << "\t" << printMBBReference(MBB)); |
| for (const auto &LI : MBB.liveins()) { |
| for (MCRegUnitIterator Units(LI.PhysReg, TRI); Units.isValid(); ++Units) { |
| unsigned Unit = *Units; |
| LiveRange *LR = RegUnitRanges[Unit]; |
| if (!LR) { |
| // Use segment set to speed-up initial computation of the live range. |
| LR = RegUnitRanges[Unit] = new LiveRange(UseSegmentSetForPhysRegs); |
| NewRanges.push_back(Unit); |
| } |
| VNInfo *VNI = LR->createDeadDef(Begin, getVNInfoAllocator()); |
| (void)VNI; |
| LLVM_DEBUG(dbgs() << ' ' << printRegUnit(Unit, TRI) << '#' << VNI->id); |
| } |
| } |
| LLVM_DEBUG(dbgs() << '\n'); |
| } |
| LLVM_DEBUG(dbgs() << "Created " << NewRanges.size() << " new intervals.\n"); |
| |
| // Compute the 'normal' part of the ranges. |
| for (unsigned Unit : NewRanges) |
| computeRegUnitRange(*RegUnitRanges[Unit], Unit); |
| } |
| |
| static void createSegmentsForValues(LiveRange &LR, |
| iterator_range<LiveInterval::vni_iterator> VNIs) { |
| for (VNInfo *VNI : VNIs) { |
| if (VNI->isUnused()) |
| continue; |
| SlotIndex Def = VNI->def; |
| LR.addSegment(LiveRange::Segment(Def, Def.getDeadSlot(), VNI)); |
| } |
| } |
| |
| void LiveIntervals::extendSegmentsToUses(LiveRange &Segments, |
| ShrinkToUsesWorkList &WorkList, |
| unsigned Reg, LaneBitmask LaneMask) { |
| // Keep track of the PHIs that are in use. |
| SmallPtrSet<VNInfo*, 8> UsedPHIs; |
| // Blocks that have already been added to WorkList as live-out. |
| SmallPtrSet<const MachineBasicBlock*, 16> LiveOut; |
| |
| auto getSubRange = [](const LiveInterval &I, LaneBitmask M) |
| -> const LiveRange& { |
| if (M.none()) |
| return I; |
| for (const LiveInterval::SubRange &SR : I.subranges()) { |
| if ((SR.LaneMask & M).any()) { |
| assert(SR.LaneMask == M && "Expecting lane masks to match exactly"); |
| return SR; |
| } |
| } |
| llvm_unreachable("Subrange for mask not found"); |
| }; |
| |
| const LiveInterval &LI = getInterval(Reg); |
| const LiveRange &OldRange = getSubRange(LI, LaneMask); |
| |
| // Extend intervals to reach all uses in WorkList. |
| while (!WorkList.empty()) { |
| SlotIndex Idx = WorkList.back().first; |
| VNInfo *VNI = WorkList.back().second; |
| WorkList.pop_back(); |
| const MachineBasicBlock *MBB = Indexes->getMBBFromIndex(Idx.getPrevSlot()); |
| SlotIndex BlockStart = Indexes->getMBBStartIdx(MBB); |
| |
| // Extend the live range for VNI to be live at Idx. |
| if (VNInfo *ExtVNI = Segments.extendInBlock(BlockStart, Idx)) { |
| assert(ExtVNI == VNI && "Unexpected existing value number"); |
| (void)ExtVNI; |
| // Is this a PHIDef we haven't seen before? |
| if (!VNI->isPHIDef() || VNI->def != BlockStart || |
| !UsedPHIs.insert(VNI).second) |
| continue; |
| // The PHI is live, make sure the predecessors are live-out. |
| for (const MachineBasicBlock *Pred : MBB->predecessors()) { |
| if (!LiveOut.insert(Pred).second) |
| continue; |
| SlotIndex Stop = Indexes->getMBBEndIdx(Pred); |
| // A predecessor is not required to have a live-out value for a PHI. |
| if (VNInfo *PVNI = OldRange.getVNInfoBefore(Stop)) |
| WorkList.push_back(std::make_pair(Stop, PVNI)); |
| } |
| continue; |
| } |
| |
| // VNI is live-in to MBB. |
| LLVM_DEBUG(dbgs() << " live-in at " << BlockStart << '\n'); |
| Segments.addSegment(LiveRange::Segment(BlockStart, Idx, VNI)); |
| |
| // Make sure VNI is live-out from the predecessors. |
| for (const MachineBasicBlock *Pred : MBB->predecessors()) { |
| if (!LiveOut.insert(Pred).second) |
| continue; |
| SlotIndex Stop = Indexes->getMBBEndIdx(Pred); |
| if (VNInfo *OldVNI = OldRange.getVNInfoBefore(Stop)) { |
| assert(OldVNI == VNI && "Wrong value out of predecessor"); |
| (void)OldVNI; |
| WorkList.push_back(std::make_pair(Stop, VNI)); |
| } else { |
| #ifndef NDEBUG |
| // There was no old VNI. Verify that Stop is jointly dominated |
| // by <undef>s for this live range. |
| assert(LaneMask.any() && |
| "Missing value out of predecessor for main range"); |
| SmallVector<SlotIndex,8> Undefs; |
| LI.computeSubRangeUndefs(Undefs, LaneMask, *MRI, *Indexes); |
| assert(LiveRangeCalc::isJointlyDominated(Pred, Undefs, *Indexes) && |
| "Missing value out of predecessor for subrange"); |
| #endif |
| } |
| } |
| } |
| } |
| |
| bool LiveIntervals::shrinkToUses(LiveInterval *li, |
| SmallVectorImpl<MachineInstr*> *dead) { |
| LLVM_DEBUG(dbgs() << "Shrink: " << *li << '\n'); |
| assert(Register::isVirtualRegister(li->reg) && |
| "Can only shrink virtual registers"); |
| |
| // Shrink subregister live ranges. |
| bool NeedsCleanup = false; |
| for (LiveInterval::SubRange &S : li->subranges()) { |
| shrinkToUses(S, li->reg); |
| if (S.empty()) |
| NeedsCleanup = true; |
| } |
| if (NeedsCleanup) |
| li->removeEmptySubRanges(); |
| |
| // Find all the values used, including PHI kills. |
| ShrinkToUsesWorkList WorkList; |
| |
| // Visit all instructions reading li->reg. |
| unsigned Reg = li->reg; |
| for (MachineInstr &UseMI : MRI->reg_instructions(Reg)) { |
| if (UseMI.isDebugValue() || !UseMI.readsVirtualRegister(Reg)) |
| continue; |
| SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot(); |
| LiveQueryResult LRQ = li->Query(Idx); |
| VNInfo *VNI = LRQ.valueIn(); |
| if (!VNI) { |
| // This shouldn't happen: readsVirtualRegister returns true, but there is |
| // no live value. It is likely caused by a target getting <undef> flags |
| // wrong. |
| LLVM_DEBUG( |
| dbgs() << Idx << '\t' << UseMI |
| << "Warning: Instr claims to read non-existent value in " |
| << *li << '\n'); |
| continue; |
| } |
| // Special case: An early-clobber tied operand reads and writes the |
| // register one slot early. |
| if (VNInfo *DefVNI = LRQ.valueDefined()) |
| Idx = DefVNI->def; |
| |
| WorkList.push_back(std::make_pair(Idx, VNI)); |
| } |
| |
| // Create new live ranges with only minimal live segments per def. |
| LiveRange NewLR; |
| createSegmentsForValues(NewLR, make_range(li->vni_begin(), li->vni_end())); |
| extendSegmentsToUses(NewLR, WorkList, Reg, LaneBitmask::getNone()); |
| |
| // Move the trimmed segments back. |
| li->segments.swap(NewLR.segments); |
| |
| // Handle dead values. |
| bool CanSeparate = computeDeadValues(*li, dead); |
| LLVM_DEBUG(dbgs() << "Shrunk: " << *li << '\n'); |
| return CanSeparate; |
| } |
| |
| bool LiveIntervals::computeDeadValues(LiveInterval &LI, |
| SmallVectorImpl<MachineInstr*> *dead) { |
| bool MayHaveSplitComponents = false; |
| bool HaveDeadDef = false; |
| |
| for (VNInfo *VNI : LI.valnos) { |
| if (VNI->isUnused()) |
| continue; |
| SlotIndex Def = VNI->def; |
| LiveRange::iterator I = LI.FindSegmentContaining(Def); |
| assert(I != LI.end() && "Missing segment for VNI"); |
| |
| // Is the register live before? Otherwise we may have to add a read-undef |
| // flag for subregister defs. |
| unsigned VReg = LI.reg; |
| if (MRI->shouldTrackSubRegLiveness(VReg)) { |
| if ((I == LI.begin() || std::prev(I)->end < Def) && !VNI->isPHIDef()) { |
| MachineInstr *MI = getInstructionFromIndex(Def); |
| MI->setRegisterDefReadUndef(VReg); |
| } |
| } |
| |
| if (I->end != Def.getDeadSlot()) |
| continue; |
| if (VNI->isPHIDef()) { |
| // This is a dead PHI. Remove it. |
| VNI->markUnused(); |
| LI.removeSegment(I); |
| LLVM_DEBUG(dbgs() << "Dead PHI at " << Def << " may separate interval\n"); |
| MayHaveSplitComponents = true; |
| } else { |
| // This is a dead def. Make sure the instruction knows. |
| MachineInstr *MI = getInstructionFromIndex(Def); |
| assert(MI && "No instruction defining live value"); |
| MI->addRegisterDead(LI.reg, TRI); |
| if (HaveDeadDef) |
| MayHaveSplitComponents = true; |
| HaveDeadDef = true; |
| |
| if (dead && MI->allDefsAreDead()) { |
| LLVM_DEBUG(dbgs() << "All defs dead: " << Def << '\t' << *MI); |
| dead->push_back(MI); |
| } |
| } |
| } |
| return MayHaveSplitComponents; |
| } |
| |
| void LiveIntervals::shrinkToUses(LiveInterval::SubRange &SR, unsigned Reg) { |
| LLVM_DEBUG(dbgs() << "Shrink: " << SR << '\n'); |
| assert(Register::isVirtualRegister(Reg) && |
| "Can only shrink virtual registers"); |
| // Find all the values used, including PHI kills. |
| ShrinkToUsesWorkList WorkList; |
| |
| // Visit all instructions reading Reg. |
| SlotIndex LastIdx; |
| for (MachineOperand &MO : MRI->use_nodbg_operands(Reg)) { |
| // Skip "undef" uses. |
| if (!MO.readsReg()) |
| continue; |
| // Maybe the operand is for a subregister we don't care about. |
| unsigned SubReg = MO.getSubReg(); |
| if (SubReg != 0) { |
| LaneBitmask LaneMask = TRI->getSubRegIndexLaneMask(SubReg); |
| if ((LaneMask & SR.LaneMask).none()) |
| continue; |
| } |
| // We only need to visit each instruction once. |
| MachineInstr *UseMI = MO.getParent(); |
| SlotIndex Idx = getInstructionIndex(*UseMI).getRegSlot(); |
| if (Idx == LastIdx) |
| continue; |
| LastIdx = Idx; |
| |
| LiveQueryResult LRQ = SR.Query(Idx); |
| VNInfo *VNI = LRQ.valueIn(); |
| // For Subranges it is possible that only undef values are left in that |
| // part of the subregister, so there is no real liverange at the use |
| if (!VNI) |
| continue; |
| |
| // Special case: An early-clobber tied operand reads and writes the |
| // register one slot early. |
| if (VNInfo *DefVNI = LRQ.valueDefined()) |
| Idx = DefVNI->def; |
| |
| WorkList.push_back(std::make_pair(Idx, VNI)); |
| } |
| |
| // Create a new live ranges with only minimal live segments per def. |
| LiveRange NewLR; |
| createSegmentsForValues(NewLR, make_range(SR.vni_begin(), SR.vni_end())); |
| extendSegmentsToUses(NewLR, WorkList, Reg, SR.LaneMask); |
| |
| // Move the trimmed ranges back. |
| SR.segments.swap(NewLR.segments); |
| |
| // Remove dead PHI value numbers |
| for (VNInfo *VNI : SR.valnos) { |
| if (VNI->isUnused()) |
| continue; |
| const LiveRange::Segment *Segment = SR.getSegmentContaining(VNI->def); |
| assert(Segment != nullptr && "Missing segment for VNI"); |
| if (Segment->end != VNI->def.getDeadSlot()) |
| continue; |
| if (VNI->isPHIDef()) { |
| // This is a dead PHI. Remove it. |
| LLVM_DEBUG(dbgs() << "Dead PHI at " << VNI->def |
| << " may separate interval\n"); |
| VNI->markUnused(); |
| SR.removeSegment(*Segment); |
| } |
| } |
| |
| LLVM_DEBUG(dbgs() << "Shrunk: " << SR << '\n'); |
| } |
| |
| void LiveIntervals::extendToIndices(LiveRange &LR, |
| ArrayRef<SlotIndex> Indices, |
| ArrayRef<SlotIndex> Undefs) { |
| assert(LRCalc && "LRCalc not initialized."); |
| LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator()); |
| for (SlotIndex Idx : Indices) |
| LRCalc->extend(LR, Idx, /*PhysReg=*/0, Undefs); |
| } |
| |
| void LiveIntervals::pruneValue(LiveRange &LR, SlotIndex Kill, |
| SmallVectorImpl<SlotIndex> *EndPoints) { |
| LiveQueryResult LRQ = LR.Query(Kill); |
| VNInfo *VNI = LRQ.valueOutOrDead(); |
| if (!VNI) |
| return; |
| |
| MachineBasicBlock *KillMBB = Indexes->getMBBFromIndex(Kill); |
| SlotIndex MBBEnd = Indexes->getMBBEndIdx(KillMBB); |
| |
| // If VNI isn't live out from KillMBB, the value is trivially pruned. |
| if (LRQ.endPoint() < MBBEnd) { |
| LR.removeSegment(Kill, LRQ.endPoint()); |
| if (EndPoints) EndPoints->push_back(LRQ.endPoint()); |
| return; |
| } |
| |
| // VNI is live out of KillMBB. |
| LR.removeSegment(Kill, MBBEnd); |
| if (EndPoints) EndPoints->push_back(MBBEnd); |
| |
| // Find all blocks that are reachable from KillMBB without leaving VNI's live |
| // range. It is possible that KillMBB itself is reachable, so start a DFS |
| // from each successor. |
| using VisitedTy = df_iterator_default_set<MachineBasicBlock*,9>; |
| VisitedTy Visited; |
| for (MachineBasicBlock *Succ : KillMBB->successors()) { |
| for (df_ext_iterator<MachineBasicBlock*, VisitedTy> |
| I = df_ext_begin(Succ, Visited), E = df_ext_end(Succ, Visited); |
| I != E;) { |
| MachineBasicBlock *MBB = *I; |
| |
| // Check if VNI is live in to MBB. |
| SlotIndex MBBStart, MBBEnd; |
| std::tie(MBBStart, MBBEnd) = Indexes->getMBBRange(MBB); |
| LiveQueryResult LRQ = LR.Query(MBBStart); |
| if (LRQ.valueIn() != VNI) { |
| // This block isn't part of the VNI segment. Prune the search. |
| I.skipChildren(); |
| continue; |
| } |
| |
| // Prune the search if VNI is killed in MBB. |
| if (LRQ.endPoint() < MBBEnd) { |
| LR.removeSegment(MBBStart, LRQ.endPoint()); |
| if (EndPoints) EndPoints->push_back(LRQ.endPoint()); |
| I.skipChildren(); |
| continue; |
| } |
| |
| // VNI is live through MBB. |
| LR.removeSegment(MBBStart, MBBEnd); |
| if (EndPoints) EndPoints->push_back(MBBEnd); |
| ++I; |
| } |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Register allocator hooks. |
| // |
| |
| void LiveIntervals::addKillFlags(const VirtRegMap *VRM) { |
| // Keep track of regunit ranges. |
| SmallVector<std::pair<const LiveRange*, LiveRange::const_iterator>, 8> RU; |
| // Keep track of subregister ranges. |
| SmallVector<std::pair<const LiveInterval::SubRange*, |
| LiveRange::const_iterator>, 4> SRs; |
| |
| for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) { |
| unsigned Reg = Register::index2VirtReg(i); |
| if (MRI->reg_nodbg_empty(Reg)) |
| continue; |
| const LiveInterval &LI = getInterval(Reg); |
| if (LI.empty()) |
| continue; |
| |
| // Find the regunit intervals for the assigned register. They may overlap |
| // the virtual register live range, cancelling any kills. |
| RU.clear(); |
| for (MCRegUnitIterator Unit(VRM->getPhys(Reg), TRI); Unit.isValid(); |
| ++Unit) { |
| const LiveRange &RURange = getRegUnit(*Unit); |
| if (RURange.empty()) |
| continue; |
| RU.push_back(std::make_pair(&RURange, RURange.find(LI.begin()->end))); |
| } |
| |
| if (MRI->subRegLivenessEnabled()) { |
| SRs.clear(); |
| for (const LiveInterval::SubRange &SR : LI.subranges()) { |
| SRs.push_back(std::make_pair(&SR, SR.find(LI.begin()->end))); |
| } |
| } |
| |
| // Every instruction that kills Reg corresponds to a segment range end |
| // point. |
| for (LiveInterval::const_iterator RI = LI.begin(), RE = LI.end(); RI != RE; |
| ++RI) { |
| // A block index indicates an MBB edge. |
| if (RI->end.isBlock()) |
| continue; |
| MachineInstr *MI = getInstructionFromIndex(RI->end); |
| if (!MI) |
| continue; |
| |
| // Check if any of the regunits are live beyond the end of RI. That could |
| // happen when a physreg is defined as a copy of a virtreg: |
| // |
| // %eax = COPY %5 |
| // FOO %5 <--- MI, cancel kill because %eax is live. |
| // BAR killed %eax |
| // |
| // There should be no kill flag on FOO when %5 is rewritten as %eax. |
| for (auto &RUP : RU) { |
| const LiveRange &RURange = *RUP.first; |
| LiveRange::const_iterator &I = RUP.second; |
| if (I == RURange.end()) |
| continue; |
| I = RURange.advanceTo(I, RI->end); |
| if (I == RURange.end() || I->start >= RI->end) |
| continue; |
| // I is overlapping RI. |
| goto CancelKill; |
| } |
| |
| if (MRI->subRegLivenessEnabled()) { |
| // When reading a partial undefined value we must not add a kill flag. |
| // The regalloc might have used the undef lane for something else. |
| // Example: |
| // %1 = ... ; R32: %1 |
| // %2:high16 = ... ; R64: %2 |
| // = read killed %2 ; R64: %2 |
| // = read %1 ; R32: %1 |
| // The <kill> flag is correct for %2, but the register allocator may |
| // assign R0L to %1, and R0 to %2 because the low 32bits of R0 |
| // are actually never written by %2. After assignment the <kill> |
| // flag at the read instruction is invalid. |
| LaneBitmask DefinedLanesMask; |
| if (!SRs.empty()) { |
| // Compute a mask of lanes that are defined. |
| DefinedLanesMask = LaneBitmask::getNone(); |
| for (auto &SRP : SRs) { |
| const LiveInterval::SubRange &SR = *SRP.first; |
| LiveRange::const_iterator &I = SRP.second; |
| if (I == SR.end()) |
| continue; |
| I = SR.advanceTo(I, RI->end); |
| if (I == SR.end() || I->start >= RI->end) |
| continue; |
| // I is overlapping RI |
| DefinedLanesMask |= SR.LaneMask; |
| } |
| } else |
| DefinedLanesMask = LaneBitmask::getAll(); |
| |
| bool IsFullWrite = false; |
| for (const MachineOperand &MO : MI->operands()) { |
| if (!MO.isReg() || MO.getReg() != Reg) |
| continue; |
| if (MO.isUse()) { |
| // Reading any undefined lanes? |
| LaneBitmask UseMask = TRI->getSubRegIndexLaneMask(MO.getSubReg()); |
| if ((UseMask & ~DefinedLanesMask).any()) |
| goto CancelKill; |
| } else if (MO.getSubReg() == 0) { |
| // Writing to the full register? |
| assert(MO.isDef()); |
| IsFullWrite = true; |
| } |
| } |
| |
| // If an instruction writes to a subregister, a new segment starts in |
| // the LiveInterval. But as this is only overriding part of the register |
| // adding kill-flags is not correct here after registers have been |
| // assigned. |
| if (!IsFullWrite) { |
| // Next segment has to be adjacent in the subregister write case. |
| LiveRange::const_iterator N = std::next(RI); |
| if (N != LI.end() && N->start == RI->end) |
| goto CancelKill; |
| } |
| } |
| |
| MI->addRegisterKilled(Reg, nullptr); |
| continue; |
| CancelKill: |
| MI->clearRegisterKills(Reg, nullptr); |
| } |
| } |
| } |
| |
| MachineBasicBlock* |
| LiveIntervals::intervalIsInOneMBB(const LiveInterval &LI) const { |
| // A local live range must be fully contained inside the block, meaning it is |
| // defined and killed at instructions, not at block boundaries. It is not |
| // live in or out of any block. |
| // |
| // It is technically possible to have a PHI-defined live range identical to a |
| // single block, but we are going to return false in that case. |
| |
| SlotIndex Start = LI.beginIndex(); |
| if (Start.isBlock()) |
| return nullptr; |
| |
| SlotIndex Stop = LI.endIndex(); |
| if (Stop.isBlock()) |
| return nullptr; |
| |
| // getMBBFromIndex doesn't need to search the MBB table when both indexes |
| // belong to proper instructions. |
| MachineBasicBlock *MBB1 = Indexes->getMBBFromIndex(Start); |
| MachineBasicBlock *MBB2 = Indexes->getMBBFromIndex(Stop); |
| return MBB1 == MBB2 ? MBB1 : nullptr; |
| } |
| |
| bool |
| LiveIntervals::hasPHIKill(const LiveInterval &LI, const VNInfo *VNI) const { |
| for (const VNInfo *PHI : LI.valnos) { |
| if (PHI->isUnused() || !PHI->isPHIDef()) |
| continue; |
| const MachineBasicBlock *PHIMBB = getMBBFromIndex(PHI->def); |
| // Conservatively return true instead of scanning huge predecessor lists. |
| if (PHIMBB->pred_size() > 100) |
| return true; |
| for (const MachineBasicBlock *Pred : PHIMBB->predecessors()) |
| if (VNI == LI.getVNInfoBefore(Indexes->getMBBEndIdx(Pred))) |
| return true; |
| } |
| return false; |
| } |
| |
| float LiveIntervals::getSpillWeight(bool isDef, bool isUse, |
| const MachineBlockFrequencyInfo *MBFI, |
| const MachineInstr &MI) { |
| return getSpillWeight(isDef, isUse, MBFI, MI.getParent()); |
| } |
| |
| float LiveIntervals::getSpillWeight(bool isDef, bool isUse, |
| const MachineBlockFrequencyInfo *MBFI, |
| const MachineBasicBlock *MBB) { |
| BlockFrequency Freq = MBFI->getBlockFreq(MBB); |
| const float Scale = 1.0f / MBFI->getEntryFreq(); |
| return (isDef + isUse) * (Freq.getFrequency() * Scale); |
| } |
| |
| LiveRange::Segment |
| LiveIntervals::addSegmentToEndOfBlock(unsigned reg, MachineInstr &startInst) { |
| LiveInterval& Interval = createEmptyInterval(reg); |
| VNInfo *VN = Interval.getNextValue( |
| SlotIndex(getInstructionIndex(startInst).getRegSlot()), |
| getVNInfoAllocator()); |
| LiveRange::Segment S(SlotIndex(getInstructionIndex(startInst).getRegSlot()), |
| getMBBEndIdx(startInst.getParent()), VN); |
| Interval.addSegment(S); |
| |
| return S; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Register mask functions |
| //===----------------------------------------------------------------------===// |
| |
| bool LiveIntervals::checkRegMaskInterference(LiveInterval &LI, |
| BitVector &UsableRegs) { |
| if (LI.empty()) |
| return false; |
| LiveInterval::iterator LiveI = LI.begin(), LiveE = LI.end(); |
| |
| // Use a smaller arrays for local live ranges. |
| ArrayRef<SlotIndex> Slots; |
| ArrayRef<const uint32_t*> Bits; |
| if (MachineBasicBlock *MBB = intervalIsInOneMBB(LI)) { |
| Slots = getRegMaskSlotsInBlock(MBB->getNumber()); |
| Bits = getRegMaskBitsInBlock(MBB->getNumber()); |
| } else { |
| Slots = getRegMaskSlots(); |
| Bits = getRegMaskBits(); |
| } |
| |
| // We are going to enumerate all the register mask slots contained in LI. |
| // Start with a binary search of RegMaskSlots to find a starting point. |
| ArrayRef<SlotIndex>::iterator SlotI = llvm::lower_bound(Slots, LiveI->start); |
| ArrayRef<SlotIndex>::iterator SlotE = Slots.end(); |
| |
| // No slots in range, LI begins after the last call. |
| if (SlotI == SlotE) |
| return false; |
| |
| bool Found = false; |
| while (true) { |
| assert(*SlotI >= LiveI->start); |
| // Loop over all slots overlapping this segment. |
| while (*SlotI < LiveI->end) { |
| // *SlotI overlaps LI. Collect mask bits. |
| if (!Found) { |
| // This is the first overlap. Initialize UsableRegs to all ones. |
| UsableRegs.clear(); |
| UsableRegs.resize(TRI->getNumRegs(), true); |
| Found = true; |
| } |
| // Remove usable registers clobbered by this mask. |
| UsableRegs.clearBitsNotInMask(Bits[SlotI-Slots.begin()]); |
| if (++SlotI == SlotE) |
| return Found; |
| } |
| // *SlotI is beyond the current LI segment. |
| LiveI = LI.advanceTo(LiveI, *SlotI); |
| if (LiveI == LiveE) |
| return Found; |
| // Advance SlotI until it overlaps. |
| while (*SlotI < LiveI->start) |
| if (++SlotI == SlotE) |
| return Found; |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // IntervalUpdate class. |
| //===----------------------------------------------------------------------===// |
| |
| /// Toolkit used by handleMove to trim or extend live intervals. |
| class LiveIntervals::HMEditor { |
| private: |
| LiveIntervals& LIS; |
| const MachineRegisterInfo& MRI; |
| const TargetRegisterInfo& TRI; |
| SlotIndex OldIdx; |
| SlotIndex NewIdx; |
| SmallPtrSet<LiveRange*, 8> Updated; |
| bool UpdateFlags; |
| |
| public: |
| HMEditor(LiveIntervals& LIS, const MachineRegisterInfo& MRI, |
| const TargetRegisterInfo& TRI, |
| SlotIndex OldIdx, SlotIndex NewIdx, bool UpdateFlags) |
| : LIS(LIS), MRI(MRI), TRI(TRI), OldIdx(OldIdx), NewIdx(NewIdx), |
| UpdateFlags(UpdateFlags) {} |
| |
| // FIXME: UpdateFlags is a workaround that creates live intervals for all |
| // physregs, even those that aren't needed for regalloc, in order to update |
| // kill flags. This is wasteful. Eventually, LiveVariables will strip all kill |
| // flags, and postRA passes will use a live register utility instead. |
| LiveRange *getRegUnitLI(unsigned Unit) { |
| if (UpdateFlags && !MRI.isReservedRegUnit(Unit)) |
| return &LIS.getRegUnit(Unit); |
| return LIS.getCachedRegUnit(Unit); |
| } |
| |
| /// Update all live ranges touched by MI, assuming a move from OldIdx to |
| /// NewIdx. |
| void updateAllRanges(MachineInstr *MI) { |
| LLVM_DEBUG(dbgs() << "handleMove " << OldIdx << " -> " << NewIdx << ": " |
| << *MI); |
| bool hasRegMask = false; |
| for (MachineOperand &MO : MI->operands()) { |
| if (MO.isRegMask()) |
| hasRegMask = true; |
| if (!MO.isReg()) |
| continue; |
| if (MO.isUse()) { |
| if (!MO.readsReg()) |
| continue; |
| // Aggressively clear all kill flags. |
| // They are reinserted by VirtRegRewriter. |
| MO.setIsKill(false); |
| } |
| |
| Register Reg = MO.getReg(); |
| if (!Reg) |
| continue; |
| if (Register::isVirtualRegister(Reg)) { |
| LiveInterval &LI = LIS.getInterval(Reg); |
| if (LI.hasSubRanges()) { |
| unsigned SubReg = MO.getSubReg(); |
| LaneBitmask LaneMask = SubReg ? TRI.getSubRegIndexLaneMask(SubReg) |
| : MRI.getMaxLaneMaskForVReg(Reg); |
| for (LiveInterval::SubRange &S : LI.subranges()) { |
| if ((S.LaneMask & LaneMask).none()) |
| continue; |
| updateRange(S, Reg, S.LaneMask); |
| } |
| } |
| updateRange(LI, Reg, LaneBitmask::getNone()); |
| continue; |
| } |
| |
| // For physregs, only update the regunits that actually have a |
| // precomputed live range. |
| for (MCRegUnitIterator Units(Reg, &TRI); Units.isValid(); ++Units) |
| if (LiveRange *LR = getRegUnitLI(*Units)) |
| updateRange(*LR, *Units, LaneBitmask::getNone()); |
| } |
| if (hasRegMask) |
| updateRegMaskSlots(); |
| } |
| |
| private: |
| /// Update a single live range, assuming an instruction has been moved from |
| /// OldIdx to NewIdx. |
| void updateRange(LiveRange &LR, unsigned Reg, LaneBitmask LaneMask) { |
| if (!Updated.insert(&LR).second) |
| return; |
| LLVM_DEBUG({ |
| dbgs() << " "; |
| if (Register::isVirtualRegister(Reg)) { |
| dbgs() << printReg(Reg); |
| if (LaneMask.any()) |
| dbgs() << " L" << PrintLaneMask(LaneMask); |
| } else { |
| dbgs() << printRegUnit(Reg, &TRI); |
| } |
| dbgs() << ":\t" << LR << '\n'; |
| }); |
| if (SlotIndex::isEarlierInstr(OldIdx, NewIdx)) |
| handleMoveDown(LR); |
| else |
| handleMoveUp(LR, Reg, LaneMask); |
| LLVM_DEBUG(dbgs() << " -->\t" << LR << '\n'); |
| LR.verify(); |
| } |
| |
| /// Update LR to reflect an instruction has been moved downwards from OldIdx |
| /// to NewIdx (OldIdx < NewIdx). |
| void handleMoveDown(LiveRange &LR) { |
| LiveRange::iterator E = LR.end(); |
| // Segment going into OldIdx. |
| LiveRange::iterator OldIdxIn = LR.find(OldIdx.getBaseIndex()); |
| |
| // No value live before or after OldIdx? Nothing to do. |
| if (OldIdxIn == E || SlotIndex::isEarlierInstr(OldIdx, OldIdxIn->start)) |
| return; |
| |
| LiveRange::iterator OldIdxOut; |
| // Do we have a value live-in to OldIdx? |
| if (SlotIndex::isEarlierInstr(OldIdxIn->start, OldIdx)) { |
| // If the live-in value already extends to NewIdx, there is nothing to do. |
| if (SlotIndex::isEarlierEqualInstr(NewIdx, OldIdxIn->end)) |
| return; |
| // Aggressively remove all kill flags from the old kill point. |
| // Kill flags shouldn't be used while live intervals exist, they will be |
| // reinserted by VirtRegRewriter. |
| if (MachineInstr *KillMI = LIS.getInstructionFromIndex(OldIdxIn->end)) |
| for (MachineOperand &MOP : mi_bundle_ops(*KillMI)) |
| if (MOP.isReg() && MOP.isUse()) |
| MOP.setIsKill(false); |
| |
| // Is there a def before NewIdx which is not OldIdx? |
| LiveRange::iterator Next = std::next(OldIdxIn); |
| if (Next != E && !SlotIndex::isSameInstr(OldIdx, Next->start) && |
| SlotIndex::isEarlierInstr(Next->start, NewIdx)) { |
| // If we are here then OldIdx was just a use but not a def. We only have |
| // to ensure liveness extends to NewIdx. |
| LiveRange::iterator NewIdxIn = |
| LR.advanceTo(Next, NewIdx.getBaseIndex()); |
| // Extend the segment before NewIdx if necessary. |
| if (NewIdxIn == E || |
| !SlotIndex::isEarlierInstr(NewIdxIn->start, NewIdx)) { |
| LiveRange::iterator Prev = std::prev(NewIdxIn); |
| Prev->end = NewIdx.getRegSlot(); |
| } |
| // Extend OldIdxIn. |
| OldIdxIn->end = Next->start; |
| return; |
| } |
| |
| // Adjust OldIdxIn->end to reach NewIdx. This may temporarily make LR |
| // invalid by overlapping ranges. |
| bool isKill = SlotIndex::isSameInstr(OldIdx, OldIdxIn->end); |
| OldIdxIn->end = NewIdx.getRegSlot(OldIdxIn->end.isEarlyClobber()); |
| // If this was not a kill, then there was no def and we're done. |
| if (!isKill) |
| return; |
| |
| // Did we have a Def at OldIdx? |
| OldIdxOut = Next; |
| if (OldIdxOut == E || !SlotIndex::isSameInstr(OldIdx, OldIdxOut->start)) |
| return; |
| } else { |
| OldIdxOut = OldIdxIn; |
| } |
| |
| // If we are here then there is a Definition at OldIdx. OldIdxOut points |
| // to the segment starting there. |
| assert(OldIdxOut != E && SlotIndex::isSameInstr(OldIdx, OldIdxOut->start) && |
| "No def?"); |
| VNInfo *OldIdxVNI = OldIdxOut->valno; |
| assert(OldIdxVNI->def == OldIdxOut->start && "Inconsistent def"); |
| |
| // If the defined value extends beyond NewIdx, just move the beginning |
| // of the segment to NewIdx. |
| SlotIndex NewIdxDef = NewIdx.getRegSlot(OldIdxOut->start.isEarlyClobber()); |
| if (SlotIndex::isEarlierInstr(NewIdxDef, OldIdxOut->end)) { |
| OldIdxVNI->def = NewIdxDef; |
| OldIdxOut->start = OldIdxVNI->def; |
| return; |
| } |
| |
| // If we are here then we have a Definition at OldIdx which ends before |
| // NewIdx. |
| |
| // Is there an existing Def at NewIdx? |
| LiveRange::iterator AfterNewIdx |
| = LR.advanceTo(OldIdxOut, NewIdx.getRegSlot()); |
| bool OldIdxDefIsDead = OldIdxOut->end.isDead(); |
| if (!OldIdxDefIsDead && |
| SlotIndex::isEarlierInstr(OldIdxOut->end, NewIdxDef)) { |
| // OldIdx is not a dead def, and NewIdxDef is inside a new interval. |
| VNInfo *DefVNI; |
| if (OldIdxOut != LR.begin() && |
| !SlotIndex::isEarlierInstr(std::prev(OldIdxOut)->end, |
| OldIdxOut->start)) { |
| // There is no gap between OldIdxOut and its predecessor anymore, |
| // merge them. |
| LiveRange::iterator IPrev = std::prev(OldIdxOut); |
| DefVNI = OldIdxVNI; |
| IPrev->end = OldIdxOut->end; |
| } else { |
| // The value is live in to OldIdx |
| LiveRange::iterator INext = std::next(OldIdxOut); |
| assert(INext != E && "Must have following segment"); |
| // We merge OldIdxOut and its successor. As we're dealing with subreg |
| // reordering, there is always a successor to OldIdxOut in the same BB |
| // We don't need INext->valno anymore and will reuse for the new segment |
| // we create later. |
| DefVNI = OldIdxVNI; |
| INext->start = OldIdxOut->end; |
| INext->valno->def = INext->start; |
| } |
| // If NewIdx is behind the last segment, extend that and append a new one. |
| if (AfterNewIdx == E) { |
| // OldIdxOut is undef at this point, Slide (OldIdxOut;AfterNewIdx] up |
| // one position. |
| // |- ?/OldIdxOut -| |- X0 -| ... |- Xn -| end |
| // => |- X0/OldIdxOut -| ... |- Xn -| |- undef/NewS -| end |
| std::copy(std::next(OldIdxOut), E, OldIdxOut); |
| // The last segment is undefined now, reuse it for a dead def. |
| LiveRange::iterator NewSegment = std::prev(E); |
| *NewSegment = LiveRange::Segment(NewIdxDef, NewIdxDef.getDeadSlot(), |
| DefVNI); |
| DefVNI->def = NewIdxDef; |
| |
| LiveRange::iterator Prev = std::prev(NewSegment); |
| Prev->end = NewIdxDef; |
| } else { |
| // OldIdxOut is undef at this point, Slide (OldIdxOut;AfterNewIdx] up |
| // one position. |
| // |- ?/OldIdxOut -| |- X0 -| ... |- Xn/AfterNewIdx -| |- Next -| |
| // => |- X0/OldIdxOut -| ... |- Xn -| |- Xn/AfterNewIdx -| |- Next -| |
| std::copy(std::next(OldIdxOut), std::next(AfterNewIdx), OldIdxOut); |
| LiveRange::iterator Prev = std::prev(AfterNewIdx); |
| // We have two cases: |
| if (SlotIndex::isEarlierInstr(Prev->start, NewIdxDef)) { |
| // Case 1: NewIdx is inside a liverange. Split this liverange at |
| // NewIdxDef into the segment "Prev" followed by "NewSegment". |
| LiveRange::iterator NewSegment = AfterNewIdx; |
| *NewSegment = LiveRange::Segment(NewIdxDef, Prev->end, Prev->valno); |
| Prev->valno->def = NewIdxDef; |
| |
| *Prev = LiveRange::Segment(Prev->start, NewIdxDef, DefVNI); |
| DefVNI->def = Prev->start; |
| } else { |
| // Case 2: NewIdx is in a lifetime hole. Keep AfterNewIdx as is and |
| // turn Prev into a segment from NewIdx to AfterNewIdx->start. |
| *Prev = LiveRange::Segment(NewIdxDef, AfterNewIdx->start, DefVNI); |
| DefVNI->def = NewIdxDef; |
| assert(DefVNI != AfterNewIdx->valno); |
| } |
| } |
| return; |
| } |
| |
| if (AfterNewIdx != E && |
| SlotIndex::isSameInstr(AfterNewIdx->start, NewIdxDef)) { |
| // There is an existing def at NewIdx. The def at OldIdx is coalesced into |
| // that value. |
| assert(AfterNewIdx->valno != OldIdxVNI && "Multiple defs of value?"); |
| LR.removeValNo(OldIdxVNI); |
| } else { |
| // There was no existing def at NewIdx. We need to create a dead def |
| // at NewIdx. Shift segments over the old OldIdxOut segment, this frees |
| // a new segment at the place where we want to construct the dead def. |
| // |- OldIdxOut -| |- X0 -| ... |- Xn -| |- AfterNewIdx -| |
| // => |- X0/OldIdxOut -| ... |- Xn -| |- undef/NewS. -| |- AfterNewIdx -| |
| assert(AfterNewIdx != OldIdxOut && "Inconsistent iterators"); |
| std::copy(std::next(OldIdxOut), AfterNewIdx, OldIdxOut); |
| // We can reuse OldIdxVNI now. |
| LiveRange::iterator NewSegment = std::prev(AfterNewIdx); |
| VNInfo *NewSegmentVNI = OldIdxVNI; |
| NewSegmentVNI->def = NewIdxDef; |
| *NewSegment = LiveRange::Segment(NewIdxDef, NewIdxDef.getDeadSlot(), |
| NewSegmentVNI); |
| } |
| } |
| |
| /// Update LR to reflect an instruction has been moved upwards from OldIdx |
| /// to NewIdx (NewIdx < OldIdx). |
| void handleMoveUp(LiveRange &LR, unsigned Reg, LaneBitmask LaneMask) { |
| LiveRange::iterator E = LR.end(); |
| // Segment going into OldIdx. |
| LiveRange::iterator OldIdxIn = LR.find(OldIdx.getBaseIndex()); |
| |
| // No value live before or after OldIdx? Nothing to do. |
| if (OldIdxIn == E || SlotIndex::isEarlierInstr(OldIdx, OldIdxIn->start)) |
| return; |
| |
| LiveRange::iterator OldIdxOut; |
| // Do we have a value live-in to OldIdx? |
| if (SlotIndex::isEarlierInstr(OldIdxIn->start, OldIdx)) { |
| // If the live-in value isn't killed here, then we have no Def at |
| // OldIdx, moreover the value must be live at NewIdx so there is nothing |
| // to do. |
| bool isKill = SlotIndex::isSameInstr(OldIdx, OldIdxIn->end); |
| if (!isKill) |
| return; |
| |
| // At this point we have to move OldIdxIn->end back to the nearest |
| // previous use or (dead-)def but no further than NewIdx. |
| SlotIndex DefBeforeOldIdx |
| = std::max(OldIdxIn->start.getDeadSlot(), |
| NewIdx.getRegSlot(OldIdxIn->end.isEarlyClobber())); |
| OldIdxIn->end = findLastUseBefore(DefBeforeOldIdx, Reg, LaneMask); |
| |
| // Did we have a Def at OldIdx? If not we are done now. |
| OldIdxOut = std::next(OldIdxIn); |
| if (OldIdxOut == E || !SlotIndex::isSameInstr(OldIdx, OldIdxOut->start)) |
| return; |
| } else { |
| OldIdxOut = OldIdxIn; |
| OldIdxIn = OldIdxOut != LR.begin() ? std::prev(OldIdxOut) : E; |
| } |
| |
| // If we are here then there is a Definition at OldIdx. OldIdxOut points |
| // to the segment starting there. |
| assert(OldIdxOut != E && SlotIndex::isSameInstr(OldIdx, OldIdxOut->start) && |
| "No def?"); |
| VNInfo *OldIdxVNI = OldIdxOut->valno; |
| assert(OldIdxVNI->def == OldIdxOut->start && "Inconsistent def"); |
| bool OldIdxDefIsDead = OldIdxOut->end.isDead(); |
| |
| // Is there an existing def at NewIdx? |
| SlotIndex NewIdxDef = NewIdx.getRegSlot(OldIdxOut->start.isEarlyClobber()); |
| LiveRange::iterator NewIdxOut = LR.find(NewIdx.getRegSlot()); |
| if (SlotIndex::isSameInstr(NewIdxOut->start, NewIdx)) { |
| assert(NewIdxOut->valno != OldIdxVNI && |
| "Same value defined more than once?"); |
| // If OldIdx was a dead def remove it. |
| if (!OldIdxDefIsDead) { |
| // Remove segment starting at NewIdx and move begin of OldIdxOut to |
| // NewIdx so it can take its place. |
| OldIdxVNI->def = NewIdxDef; |
| OldIdxOut->start = NewIdxDef; |
| LR.removeValNo(NewIdxOut->valno); |
| } else { |
| // Simply remove the dead def at OldIdx. |
| LR.removeValNo(OldIdxVNI); |
| } |
| } else { |
| // Previously nothing was live after NewIdx, so all we have to do now is |
| // move the begin of OldIdxOut to NewIdx. |
| if (!OldIdxDefIsDead) { |
| // Do we have any intermediate Defs between OldIdx and NewIdx? |
| if (OldIdxIn != E && |
| SlotIndex::isEarlierInstr(NewIdxDef, OldIdxIn->start)) { |
| // OldIdx is not a dead def and NewIdx is before predecessor start. |
| LiveRange::iterator NewIdxIn = NewIdxOut; |
| assert(NewIdxIn == LR.find(NewIdx.getBaseIndex())); |
| const SlotIndex SplitPos = NewIdxDef; |
| OldIdxVNI = OldIdxIn->valno; |
| |
| SlotIndex NewDefEndPoint = std::next(NewIdxIn)->end; |
| LiveRange::iterator Prev = std::prev(OldIdxIn); |
| if (OldIdxIn != LR.begin() && |
| SlotIndex::isEarlierInstr(NewIdx, Prev->end)) { |
| // If the segment before OldIdx read a value defined earlier than |
| // NewIdx, the moved instruction also reads and forwards that |
| // value. Extend the lifetime of the new def point. |
| |
| // Extend to where the previous range started, unless there is |
| // another redef first. |
| NewDefEndPoint = std::min(OldIdxIn->start, |
| std::next(NewIdxOut)->start); |
| } |
| |
| // Merge the OldIdxIn and OldIdxOut segments into OldIdxOut. |
| OldIdxOut->valno->def = OldIdxIn->start; |
| *OldIdxOut = LiveRange::Segment(OldIdxIn->start, OldIdxOut->end, |
| OldIdxOut->valno); |
| // OldIdxIn and OldIdxVNI are now undef and can be overridden. |
| // We Slide [NewIdxIn, OldIdxIn) down one position. |
| // |- X0/NewIdxIn -| ... |- Xn-1 -||- Xn/OldIdxIn -||- OldIdxOut -| |
| // => |- undef/NexIdxIn -| |- X0 -| ... |- Xn-1 -| |- Xn/OldIdxOut -| |
| std::copy_backward(NewIdxIn, OldIdxIn, OldIdxOut); |
| // NewIdxIn is now considered undef so we can reuse it for the moved |
| // value. |
| LiveRange::iterator NewSegment = NewIdxIn; |
| LiveRange::iterator Next = std::next(NewSegment); |
| if (SlotIndex::isEarlierInstr(Next->start, NewIdx)) { |
| // There is no gap between NewSegment and its predecessor. |
| *NewSegment = LiveRange::Segment(Next->start, SplitPos, |
| Next->valno); |
| |
| *Next = LiveRange::Segment(SplitPos, NewDefEndPoint, OldIdxVNI); |
| Next->valno->def = SplitPos; |
| } else { |
| // There is a gap between NewSegment and its predecessor |
| // Value becomes live in. |
| *NewSegment = LiveRange::Segment(SplitPos, Next->start, OldIdxVNI); |
| NewSegment->valno->def = SplitPos; |
| } |
| } else { |
| // Leave the end point of a live def. |
| OldIdxOut->start = NewIdxDef; |
| OldIdxVNI->def = NewIdxDef; |
| if (OldIdxIn != E && SlotIndex::isEarlierInstr(NewIdx, OldIdxIn->end)) |
| OldIdxIn->end = NewIdx.getRegSlot(); |
| } |
| } else if (OldIdxIn != E |
| && SlotIndex::isEarlierInstr(NewIdxOut->start, NewIdx) |
| && SlotIndex::isEarlierInstr(NewIdx, NewIdxOut->end)) { |
| // OldIdxVNI is a dead def that has been moved into the middle of |
| // another value in LR. That can happen when LR is a whole register, |
| // but the dead def is a write to a subreg that is dead at NewIdx. |
| // The dead def may have been moved across other values |
| // in LR, so move OldIdxOut up to NewIdxOut. Slide [NewIdxOut;OldIdxOut) |
| // down one position. |
| // |- X0/NewIdxOut -| ... |- Xn-1 -| |- Xn/OldIdxOut -| |- next - | |
| // => |- X0/NewIdxOut -| |- X0 -| ... |- Xn-1 -| |- next -| |
| std::copy_backward(NewIdxOut, OldIdxOut, std::next(OldIdxOut)); |
| // Modify the segment at NewIdxOut and the following segment to meet at |
| // the point of the dead def, with the following segment getting |
| // OldIdxVNI as its value number. |
| *NewIdxOut = LiveRange::Segment( |
| NewIdxOut->start, NewIdxDef.getRegSlot(), NewIdxOut->valno); |
| *(NewIdxOut + 1) = LiveRange::Segment( |
| NewIdxDef.getRegSlot(), (NewIdxOut + 1)->end, OldIdxVNI); |
| OldIdxVNI->def = NewIdxDef; |
| // Modify subsequent segments to be defined by the moved def OldIdxVNI. |
| for (auto Idx = NewIdxOut + 2; Idx <= OldIdxOut; ++Idx) |
| Idx->valno = OldIdxVNI; |
| // Aggressively remove all dead flags from the former dead definition. |
| // Kill/dead flags shouldn't be used while live intervals exist; they |
| // will be reinserted by VirtRegRewriter. |
| if (MachineInstr *KillMI = LIS.getInstructionFromIndex(NewIdx)) |
| for (MIBundleOperands MO(*KillMI); MO.isValid(); ++MO) |
| if (MO->isReg() && !MO->isUse()) |
| MO->setIsDead(false); |
| } else { |
| // OldIdxVNI is a dead def. It may have been moved across other values |
| // in LR, so move OldIdxOut up to NewIdxOut. Slide [NewIdxOut;OldIdxOut) |
| // down one position. |
| // |- X0/NewIdxOut -| ... |- Xn-1 -| |- Xn/OldIdxOut -| |- next - | |
| // => |- undef/NewIdxOut -| |- X0 -| ... |- Xn-1 -| |- next -| |
| std::copy_backward(NewIdxOut, OldIdxOut, std::next(OldIdxOut)); |
| // OldIdxVNI can be reused now to build a new dead def segment. |
| LiveRange::iterator NewSegment = NewIdxOut; |
| VNInfo *NewSegmentVNI = OldIdxVNI; |
| *NewSegment = LiveRange::Segment(NewIdxDef, NewIdxDef.getDeadSlot(), |
| NewSegmentVNI); |
| NewSegmentVNI->def = NewIdxDef; |
| } |
| } |
| } |
| |
| void updateRegMaskSlots() { |
| SmallVectorImpl<SlotIndex>::iterator RI = |
| llvm::lower_bound(LIS.RegMaskSlots, OldIdx); |
| assert(RI != LIS.RegMaskSlots.end() && *RI == OldIdx.getRegSlot() && |
| "No RegMask at OldIdx."); |
| *RI = NewIdx.getRegSlot(); |
| assert((RI == LIS.RegMaskSlots.begin() || |
| SlotIndex::isEarlierInstr(*std::prev(RI), *RI)) && |
| "Cannot move regmask instruction above another call"); |
| assert((std::next(RI) == LIS.RegMaskSlots.end() || |
| SlotIndex::isEarlierInstr(*RI, *std::next(RI))) && |
| "Cannot move regmask instruction below another call"); |
| } |
| |
| // Return the last use of reg between NewIdx and OldIdx. |
| SlotIndex findLastUseBefore(SlotIndex Before, unsigned Reg, |
| LaneBitmask LaneMask) { |
| if (Register::isVirtualRegister(Reg)) { |
| SlotIndex LastUse = Before; |
| for (MachineOperand &MO : MRI.use_nodbg_operands(Reg)) { |
| if (MO.isUndef()) |
| continue; |
| unsigned SubReg = MO.getSubReg(); |
| if (SubReg != 0 && LaneMask.any() |
| && (TRI.getSubRegIndexLaneMask(SubReg) & LaneMask).none()) |
| continue; |
| |
| const MachineInstr &MI = *MO.getParent(); |
| SlotIndex InstSlot = LIS.getSlotIndexes()->getInstructionIndex(MI); |
| if (InstSlot > LastUse && InstSlot < OldIdx) |
| LastUse = InstSlot.getRegSlot(); |
| } |
| return LastUse; |
| } |
| |
| // This is a regunit interval, so scanning the use list could be very |
| // expensive. Scan upwards from OldIdx instead. |
| assert(Before < OldIdx && "Expected upwards move"); |
| SlotIndexes *Indexes = LIS.getSlotIndexes(); |
| MachineBasicBlock *MBB = Indexes->getMBBFromIndex(Before); |
| |
| // OldIdx may not correspond to an instruction any longer, so set MII to |
| // point to the next instruction after OldIdx, or MBB->end(). |
| MachineBasicBlock::iterator MII = MBB->end(); |
| if (MachineInstr *MI = Indexes->getInstructionFromIndex( |
| Indexes->getNextNonNullIndex(OldIdx))) |
| if (MI->getParent() == MBB) |
| MII = MI; |
| |
| MachineBasicBlock::iterator Begin = MBB->begin(); |
| while (MII != Begin) { |
| if ((--MII)->isDebugInstr()) |
| continue; |
| SlotIndex Idx = Indexes->getInstructionIndex(*MII); |
| |
| // Stop searching when Before is reached. |
| if (!SlotIndex::isEarlierInstr(Before, Idx)) |
| return Before; |
| |
| // Check if MII uses Reg. |
| for (MIBundleOperands MO(*MII); MO.isValid(); ++MO) |
| if (MO->isReg() && !MO->isUndef() && |
| Register::isPhysicalRegister(MO->getReg()) && |
| TRI.hasRegUnit(MO->getReg(), Reg)) |
| return Idx.getRegSlot(); |
| } |
| // Didn't reach Before. It must be the first instruction in the block. |
| return Before; |
| } |
| }; |
| |
| void LiveIntervals::handleMove(MachineInstr &MI, bool UpdateFlags) { |
| // It is fine to move a bundle as a whole, but not an individual instruction |
| // inside it. |
| assert((!MI.isBundled() || MI.getOpcode() == TargetOpcode::BUNDLE) && |
| "Cannot move instruction in bundle"); |
| SlotIndex OldIndex = Indexes->getInstructionIndex(MI); |
| Indexes->removeMachineInstrFromMaps(MI); |
| SlotIndex NewIndex = Indexes->insertMachineInstrInMaps(MI); |
| assert(getMBBStartIdx(MI.getParent()) <= OldIndex && |
| OldIndex < getMBBEndIdx(MI.getParent()) && |
| "Cannot handle moves across basic block boundaries."); |
| |
| HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex, UpdateFlags); |
| HME.updateAllRanges(&MI); |
| } |
| |
| void LiveIntervals::handleMoveIntoBundle(MachineInstr &MI, |
| MachineInstr &BundleStart, |
| bool UpdateFlags) { |
| SlotIndex OldIndex = Indexes->getInstructionIndex(MI); |
| SlotIndex NewIndex = Indexes->getInstructionIndex(BundleStart); |
| HMEditor HME(*this, *MRI, *TRI, OldIndex, NewIndex, UpdateFlags); |
| HME.updateAllRanges(&MI); |
| } |
| |
| void LiveIntervals::repairOldRegInRange(const MachineBasicBlock::iterator Begin, |
| const MachineBasicBlock::iterator End, |
| const SlotIndex endIdx, |
| LiveRange &LR, const unsigned Reg, |
| LaneBitmask LaneMask) { |
| LiveInterval::iterator LII = LR.find(endIdx); |
| SlotIndex lastUseIdx; |
| if (LII == LR.begin()) { |
| // This happens when the function is called for a subregister that only |
| // occurs _after_ the range that is to be repaired. |
| return; |
| } |
| if (LII != LR.end() && LII->start < endIdx) |
| lastUseIdx = LII->end; |
| else |
| --LII; |
| |
| for (MachineBasicBlock::iterator I = End; I != Begin;) { |
| --I; |
| MachineInstr &MI = *I; |
| if (MI.isDebugInstr()) |
| continue; |
| |
| SlotIndex instrIdx = getInstructionIndex(MI); |
| bool isStartValid = getInstructionFromIndex(LII->start); |
| bool isEndValid = getInstructionFromIndex(LII->end); |
| |
| // FIXME: This doesn't currently handle early-clobber or multiple removed |
| // defs inside of the region to repair. |
| for (MachineInstr::mop_iterator OI = MI.operands_begin(), |
| OE = MI.operands_end(); |
| OI != OE; ++OI) { |
| const MachineOperand &MO = *OI; |
| if (!MO.isReg() || MO.getReg() != Reg) |
| continue; |
| |
| unsigned SubReg = MO.getSubReg(); |
| LaneBitmask Mask = TRI->getSubRegIndexLaneMask(SubReg); |
| if ((Mask & LaneMask).none()) |
| continue; |
| |
| if (MO.isDef()) { |
| if (!isStartValid) { |
| if (LII->end.isDead()) { |
| SlotIndex prevStart; |
| if (LII != LR.begin()) |
| prevStart = std::prev(LII)->start; |
| |
| // FIXME: This could be more efficient if there was a |
| // removeSegment method that returned an iterator. |
| LR.removeSegment(*LII, true); |
| if (prevStart.isValid()) |
| LII = LR.find(prevStart); |
| else |
| LII = LR.begin(); |
| } else { |
| LII->start = instrIdx.getRegSlot(); |
| LII->valno->def = instrIdx.getRegSlot(); |
| if (MO.getSubReg() && !MO.isUndef()) |
| lastUseIdx = instrIdx.getRegSlot(); |
| else |
| lastUseIdx = SlotIndex(); |
| continue; |
| } |
| } |
| |
| if (!lastUseIdx.isValid()) { |
| VNInfo *VNI = LR.getNextValue(instrIdx.getRegSlot(), VNInfoAllocator); |
| LiveRange::Segment S(instrIdx.getRegSlot(), |
| instrIdx.getDeadSlot(), VNI); |
| LII = LR.addSegment(S); |
| } else if (LII->start != instrIdx.getRegSlot()) { |
| VNInfo *VNI = LR.getNextValue(instrIdx.getRegSlot(), VNInfoAllocator); |
| LiveRange::Segment S(instrIdx.getRegSlot(), lastUseIdx, VNI); |
| LII = LR.addSegment(S); |
| } |
| |
| if (MO.getSubReg() && !MO.isUndef()) |
| lastUseIdx = instrIdx.getRegSlot(); |
| else |
| lastUseIdx = SlotIndex(); |
| } else if (MO.isUse()) { |
| // FIXME: This should probably be handled outside of this branch, |
| // either as part of the def case (for defs inside of the region) or |
| // after the loop over the region. |
| if (!isEndValid && !LII->end.isBlock()) |
| LII->end = instrIdx.getRegSlot(); |
| if (!lastUseIdx.isValid()) |
| lastUseIdx = instrIdx.getRegSlot(); |
| } |
| } |
| } |
| } |
| |
| void |
| LiveIntervals::repairIntervalsInRange(MachineBasicBlock *MBB, |
| MachineBasicBlock::iterator Begin, |
| MachineBasicBlock::iterator End, |
| ArrayRef<unsigned> OrigRegs) { |
| // Find anchor points, which are at the beginning/end of blocks or at |
| // instructions that already have indexes. |
| while (Begin != MBB->begin() && !Indexes->hasIndex(*Begin)) |
| --Begin; |
| while (End != MBB->end() && !Indexes->hasIndex(*End)) |
| ++End; |
| |
| SlotIndex endIdx; |
| if (End == MBB->end()) |
| endIdx = getMBBEndIdx(MBB).getPrevSlot(); |
| else |
| endIdx = getInstructionIndex(*End); |
| |
| Indexes->repairIndexesInRange(MBB, Begin, End); |
| |
| for (MachineBasicBlock::iterator I = End; I != Begin;) { |
| --I; |
| MachineInstr &MI = *I; |
| if (MI.isDebugInstr()) |
| continue; |
| for (MachineInstr::const_mop_iterator MOI = MI.operands_begin(), |
| MOE = MI.operands_end(); |
| MOI != MOE; ++MOI) { |
| if (MOI->isReg() && Register::isVirtualRegister(MOI->getReg()) && |
| !hasInterval(MOI->getReg())) { |
| createAndComputeVirtRegInterval(MOI->getReg()); |
| } |
| } |
| } |
| |
| for (unsigned Reg : OrigRegs) { |
| if (!Register::isVirtualRegister(Reg)) |
| continue; |
| |
| LiveInterval &LI = getInterval(Reg); |
| // FIXME: Should we support undefs that gain defs? |
| if (!LI.hasAtLeastOneValue()) |
| continue; |
| |
| for (LiveInterval::SubRange &S : LI.subranges()) |
| repairOldRegInRange(Begin, End, endIdx, S, Reg, S.LaneMask); |
| |
| repairOldRegInRange(Begin, End, endIdx, LI, Reg); |
| } |
| } |
| |
| void LiveIntervals::removePhysRegDefAt(unsigned Reg, SlotIndex Pos) { |
| for (MCRegUnitIterator Unit(Reg, TRI); Unit.isValid(); ++Unit) { |
| if (LiveRange *LR = getCachedRegUnit(*Unit)) |
| if (VNInfo *VNI = LR->getVNInfoAt(Pos)) |
| LR->removeValNo(VNI); |
| } |
| } |
| |
| void LiveIntervals::removeVRegDefAt(LiveInterval &LI, SlotIndex Pos) { |
| // LI may not have the main range computed yet, but its subranges may |
| // be present. |
| VNInfo *VNI = LI.getVNInfoAt(Pos); |
| if (VNI != nullptr) { |
| assert(VNI->def.getBaseIndex() == Pos.getBaseIndex()); |
| LI.removeValNo(VNI); |
| } |
| |
| // Also remove the value defined in subranges. |
| for (LiveInterval::SubRange &S : LI.subranges()) { |
| if (VNInfo *SVNI = S.getVNInfoAt(Pos)) |
| if (SVNI->def.getBaseIndex() == Pos.getBaseIndex()) |
| S.removeValNo(SVNI); |
| } |
| LI.removeEmptySubRanges(); |
| } |
| |
| void LiveIntervals::splitSeparateComponents(LiveInterval &LI, |
| SmallVectorImpl<LiveInterval*> &SplitLIs) { |
| ConnectedVNInfoEqClasses ConEQ(*this); |
| unsigned NumComp = ConEQ.Classify(LI); |
| if (NumComp <= 1) |
| return; |
| LLVM_DEBUG(dbgs() << " Split " << NumComp << " components: " << LI << '\n'); |
| unsigned Reg = LI.reg; |
| const TargetRegisterClass *RegClass = MRI->getRegClass(Reg); |
| for (unsigned I = 1; I < NumComp; ++I) { |
| Register NewVReg = MRI->createVirtualRegister(RegClass); |
| LiveInterval &NewLI = createEmptyInterval(NewVReg); |
| SplitLIs.push_back(&NewLI); |
| } |
| ConEQ.Distribute(LI, SplitLIs.data(), *MRI); |
| } |
| |
| void LiveIntervals::constructMainRangeFromSubranges(LiveInterval &LI) { |
| assert(LRCalc && "LRCalc not initialized."); |
| LRCalc->reset(MF, getSlotIndexes(), DomTree, &getVNInfoAllocator()); |
| LRCalc->constructMainRangeFromSubranges(LI); |
| } |