| //===-- MemorySSAUpdater.cpp - Memory SSA Updater--------------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------===// |
| // |
| // This file implements the MemorySSAUpdater class. |
| // |
| //===----------------------------------------------------------------===// |
| #include "llvm/Analysis/MemorySSAUpdater.h" |
| #include "llvm/ADT/STLExtras.h" |
| #include "llvm/ADT/SetVector.h" |
| #include "llvm/ADT/SmallPtrSet.h" |
| #include "llvm/Analysis/IteratedDominanceFrontier.h" |
| #include "llvm/Analysis/LoopIterator.h" |
| #include "llvm/Analysis/MemorySSA.h" |
| #include "llvm/IR/BasicBlock.h" |
| #include "llvm/IR/Dominators.h" |
| #include "llvm/Support/Debug.h" |
| #include <algorithm> |
| |
| #define DEBUG_TYPE "memoryssa" |
| using namespace llvm; |
| |
| // This is the marker algorithm from "Simple and Efficient Construction of |
| // Static Single Assignment Form" |
| // The simple, non-marker algorithm places phi nodes at any join |
| // Here, we place markers, and only place phi nodes if they end up necessary. |
| // They are only necessary if they break a cycle (IE we recursively visit |
| // ourselves again), or we discover, while getting the value of the operands, |
| // that there are two or more definitions needing to be merged. |
| // This still will leave non-minimal form in the case of irreducible control |
| // flow, where phi nodes may be in cycles with themselves, but unnecessary. |
| MemoryAccess *MemorySSAUpdater::getPreviousDefRecursive( |
| BasicBlock *BB, |
| DenseMap<BasicBlock *, TrackingVH<MemoryAccess>> &CachedPreviousDef) { |
| // First, do a cache lookup. Without this cache, certain CFG structures |
| // (like a series of if statements) take exponential time to visit. |
| auto Cached = CachedPreviousDef.find(BB); |
| if (Cached != CachedPreviousDef.end()) |
| return Cached->second; |
| |
| // If this method is called from an unreachable block, return LoE. |
| if (!MSSA->DT->isReachableFromEntry(BB)) |
| return MSSA->getLiveOnEntryDef(); |
| |
| if (BasicBlock *Pred = BB->getUniquePredecessor()) { |
| VisitedBlocks.insert(BB); |
| // Single predecessor case, just recurse, we can only have one definition. |
| MemoryAccess *Result = getPreviousDefFromEnd(Pred, CachedPreviousDef); |
| CachedPreviousDef.insert({BB, Result}); |
| return Result; |
| } |
| |
| if (VisitedBlocks.count(BB)) { |
| // We hit our node again, meaning we had a cycle, we must insert a phi |
| // node to break it so we have an operand. The only case this will |
| // insert useless phis is if we have irreducible control flow. |
| MemoryAccess *Result = MSSA->createMemoryPhi(BB); |
| CachedPreviousDef.insert({BB, Result}); |
| return Result; |
| } |
| |
| if (VisitedBlocks.insert(BB).second) { |
| // Mark us visited so we can detect a cycle |
| SmallVector<TrackingVH<MemoryAccess>, 8> PhiOps; |
| |
| // Recurse to get the values in our predecessors for placement of a |
| // potential phi node. This will insert phi nodes if we cycle in order to |
| // break the cycle and have an operand. |
| bool UniqueIncomingAccess = true; |
| MemoryAccess *SingleAccess = nullptr; |
| for (auto *Pred : predecessors(BB)) { |
| if (MSSA->DT->isReachableFromEntry(Pred)) { |
| auto *IncomingAccess = getPreviousDefFromEnd(Pred, CachedPreviousDef); |
| if (!SingleAccess) |
| SingleAccess = IncomingAccess; |
| else if (IncomingAccess != SingleAccess) |
| UniqueIncomingAccess = false; |
| PhiOps.push_back(IncomingAccess); |
| } else |
| PhiOps.push_back(MSSA->getLiveOnEntryDef()); |
| } |
| |
| // Now try to simplify the ops to avoid placing a phi. |
| // This may return null if we never created a phi yet, that's okay |
| MemoryPhi *Phi = dyn_cast_or_null<MemoryPhi>(MSSA->getMemoryAccess(BB)); |
| |
| // See if we can avoid the phi by simplifying it. |
| auto *Result = tryRemoveTrivialPhi(Phi, PhiOps); |
| // If we couldn't simplify, we may have to create a phi |
| if (Result == Phi && UniqueIncomingAccess && SingleAccess) { |
| // A concrete Phi only exists if we created an empty one to break a cycle. |
| if (Phi) { |
| assert(Phi->operands().empty() && "Expected empty Phi"); |
| Phi->replaceAllUsesWith(SingleAccess); |
| removeMemoryAccess(Phi); |
| } |
| Result = SingleAccess; |
| } else if (Result == Phi && !(UniqueIncomingAccess && SingleAccess)) { |
| if (!Phi) |
| Phi = MSSA->createMemoryPhi(BB); |
| |
| // See if the existing phi operands match what we need. |
| // Unlike normal SSA, we only allow one phi node per block, so we can't just |
| // create a new one. |
| if (Phi->getNumOperands() != 0) { |
| // FIXME: Figure out whether this is dead code and if so remove it. |
| if (!std::equal(Phi->op_begin(), Phi->op_end(), PhiOps.begin())) { |
| // These will have been filled in by the recursive read we did above. |
| llvm::copy(PhiOps, Phi->op_begin()); |
| std::copy(pred_begin(BB), pred_end(BB), Phi->block_begin()); |
| } |
| } else { |
| unsigned i = 0; |
| for (auto *Pred : predecessors(BB)) |
| Phi->addIncoming(&*PhiOps[i++], Pred); |
| InsertedPHIs.push_back(Phi); |
| } |
| Result = Phi; |
| } |
| |
| // Set ourselves up for the next variable by resetting visited state. |
| VisitedBlocks.erase(BB); |
| CachedPreviousDef.insert({BB, Result}); |
| return Result; |
| } |
| llvm_unreachable("Should have hit one of the three cases above"); |
| } |
| |
| // This starts at the memory access, and goes backwards in the block to find the |
| // previous definition. If a definition is not found the block of the access, |
| // it continues globally, creating phi nodes to ensure we have a single |
| // definition. |
| MemoryAccess *MemorySSAUpdater::getPreviousDef(MemoryAccess *MA) { |
| if (auto *LocalResult = getPreviousDefInBlock(MA)) |
| return LocalResult; |
| DenseMap<BasicBlock *, TrackingVH<MemoryAccess>> CachedPreviousDef; |
| return getPreviousDefRecursive(MA->getBlock(), CachedPreviousDef); |
| } |
| |
| // This starts at the memory access, and goes backwards in the block to the find |
| // the previous definition. If the definition is not found in the block of the |
| // access, it returns nullptr. |
| MemoryAccess *MemorySSAUpdater::getPreviousDefInBlock(MemoryAccess *MA) { |
| auto *Defs = MSSA->getWritableBlockDefs(MA->getBlock()); |
| |
| // It's possible there are no defs, or we got handed the first def to start. |
| if (Defs) { |
| // If this is a def, we can just use the def iterators. |
| if (!isa<MemoryUse>(MA)) { |
| auto Iter = MA->getReverseDefsIterator(); |
| ++Iter; |
| if (Iter != Defs->rend()) |
| return &*Iter; |
| } else { |
| // Otherwise, have to walk the all access iterator. |
| auto End = MSSA->getWritableBlockAccesses(MA->getBlock())->rend(); |
| for (auto &U : make_range(++MA->getReverseIterator(), End)) |
| if (!isa<MemoryUse>(U)) |
| return cast<MemoryAccess>(&U); |
| // Note that if MA comes before Defs->begin(), we won't hit a def. |
| return nullptr; |
| } |
| } |
| return nullptr; |
| } |
| |
| // This starts at the end of block |
| MemoryAccess *MemorySSAUpdater::getPreviousDefFromEnd( |
| BasicBlock *BB, |
| DenseMap<BasicBlock *, TrackingVH<MemoryAccess>> &CachedPreviousDef) { |
| auto *Defs = MSSA->getWritableBlockDefs(BB); |
| |
| if (Defs) { |
| CachedPreviousDef.insert({BB, &*Defs->rbegin()}); |
| return &*Defs->rbegin(); |
| } |
| |
| return getPreviousDefRecursive(BB, CachedPreviousDef); |
| } |
| // Recurse over a set of phi uses to eliminate the trivial ones |
| MemoryAccess *MemorySSAUpdater::recursePhi(MemoryAccess *Phi) { |
| if (!Phi) |
| return nullptr; |
| TrackingVH<MemoryAccess> Res(Phi); |
| SmallVector<TrackingVH<Value>, 8> Uses; |
| std::copy(Phi->user_begin(), Phi->user_end(), std::back_inserter(Uses)); |
| for (auto &U : Uses) |
| if (MemoryPhi *UsePhi = dyn_cast<MemoryPhi>(&*U)) |
| tryRemoveTrivialPhi(UsePhi); |
| return Res; |
| } |
| |
| // Eliminate trivial phis |
| // Phis are trivial if they are defined either by themselves, or all the same |
| // argument. |
| // IE phi(a, a) or b = phi(a, b) or c = phi(a, a, c) |
| // We recursively try to remove them. |
| MemoryAccess *MemorySSAUpdater::tryRemoveTrivialPhi(MemoryPhi *Phi) { |
| assert(Phi && "Can only remove concrete Phi."); |
| auto OperRange = Phi->operands(); |
| return tryRemoveTrivialPhi(Phi, OperRange); |
| } |
| template <class RangeType> |
| MemoryAccess *MemorySSAUpdater::tryRemoveTrivialPhi(MemoryPhi *Phi, |
| RangeType &Operands) { |
| // Bail out on non-opt Phis. |
| if (NonOptPhis.count(Phi)) |
| return Phi; |
| |
| // Detect equal or self arguments |
| MemoryAccess *Same = nullptr; |
| for (auto &Op : Operands) { |
| // If the same or self, good so far |
| if (Op == Phi || Op == Same) |
| continue; |
| // not the same, return the phi since it's not eliminatable by us |
| if (Same) |
| return Phi; |
| Same = cast<MemoryAccess>(&*Op); |
| } |
| // Never found a non-self reference, the phi is undef |
| if (Same == nullptr) |
| return MSSA->getLiveOnEntryDef(); |
| if (Phi) { |
| Phi->replaceAllUsesWith(Same); |
| removeMemoryAccess(Phi); |
| } |
| |
| // We should only end up recursing in case we replaced something, in which |
| // case, we may have made other Phis trivial. |
| return recursePhi(Same); |
| } |
| |
| void MemorySSAUpdater::insertUse(MemoryUse *MU, bool RenameUses) { |
| VisitedBlocks.clear(); |
| InsertedPHIs.clear(); |
| MU->setDefiningAccess(getPreviousDef(MU)); |
| |
| // In cases without unreachable blocks, because uses do not create new |
| // may-defs, there are only two cases: |
| // 1. There was a def already below us, and therefore, we should not have |
| // created a phi node because it was already needed for the def. |
| // |
| // 2. There is no def below us, and therefore, there is no extra renaming work |
| // to do. |
| |
| // In cases with unreachable blocks, where the unnecessary Phis were |
| // optimized out, adding the Use may re-insert those Phis. Hence, when |
| // inserting Uses outside of the MSSA creation process, and new Phis were |
| // added, rename all uses if we are asked. |
| |
| if (!RenameUses && !InsertedPHIs.empty()) { |
| auto *Defs = MSSA->getBlockDefs(MU->getBlock()); |
| (void)Defs; |
| assert((!Defs || (++Defs->begin() == Defs->end())) && |
| "Block may have only a Phi or no defs"); |
| } |
| |
| if (RenameUses && InsertedPHIs.size()) { |
| SmallPtrSet<BasicBlock *, 16> Visited; |
| BasicBlock *StartBlock = MU->getBlock(); |
| |
| if (auto *Defs = MSSA->getWritableBlockDefs(StartBlock)) { |
| MemoryAccess *FirstDef = &*Defs->begin(); |
| // Convert to incoming value if it's a memorydef. A phi *is* already an |
| // incoming value. |
| if (auto *MD = dyn_cast<MemoryDef>(FirstDef)) |
| FirstDef = MD->getDefiningAccess(); |
| |
| MSSA->renamePass(MU->getBlock(), FirstDef, Visited); |
| } |
| // We just inserted a phi into this block, so the incoming value will |
| // become the phi anyway, so it does not matter what we pass. |
| for (auto &MP : InsertedPHIs) |
| if (MemoryPhi *Phi = cast_or_null<MemoryPhi>(MP)) |
| MSSA->renamePass(Phi->getBlock(), nullptr, Visited); |
| } |
| } |
| |
| // Set every incoming edge {BB, MP->getBlock()} of MemoryPhi MP to NewDef. |
| static void setMemoryPhiValueForBlock(MemoryPhi *MP, const BasicBlock *BB, |
| MemoryAccess *NewDef) { |
| // Replace any operand with us an incoming block with the new defining |
| // access. |
| int i = MP->getBasicBlockIndex(BB); |
| assert(i != -1 && "Should have found the basic block in the phi"); |
| // We can't just compare i against getNumOperands since one is signed and the |
| // other not. So use it to index into the block iterator. |
| for (const BasicBlock *BlockBB : llvm::drop_begin(MP->blocks(), i)) { |
| if (BlockBB != BB) |
| break; |
| MP->setIncomingValue(i, NewDef); |
| ++i; |
| } |
| } |
| |
| // A brief description of the algorithm: |
| // First, we compute what should define the new def, using the SSA |
| // construction algorithm. |
| // Then, we update the defs below us (and any new phi nodes) in the graph to |
| // point to the correct new defs, to ensure we only have one variable, and no |
| // disconnected stores. |
| void MemorySSAUpdater::insertDef(MemoryDef *MD, bool RenameUses) { |
| // Don't bother updating dead code. |
| if (!MSSA->DT->isReachableFromEntry(MD->getBlock())) { |
| MD->setDefiningAccess(MSSA->getLiveOnEntryDef()); |
| return; |
| } |
| |
| VisitedBlocks.clear(); |
| InsertedPHIs.clear(); |
| |
| // See if we had a local def, and if not, go hunting. |
| MemoryAccess *DefBefore = getPreviousDef(MD); |
| bool DefBeforeSameBlock = false; |
| if (DefBefore->getBlock() == MD->getBlock() && |
| !(isa<MemoryPhi>(DefBefore) && |
| llvm::is_contained(InsertedPHIs, DefBefore))) |
| DefBeforeSameBlock = true; |
| |
| // There is a def before us, which means we can replace any store/phi uses |
| // of that thing with us, since we are in the way of whatever was there |
| // before. |
| // We now define that def's memorydefs and memoryphis |
| if (DefBeforeSameBlock) { |
| DefBefore->replaceUsesWithIf(MD, [MD](Use &U) { |
| // Leave the MemoryUses alone. |
| // Also make sure we skip ourselves to avoid self references. |
| User *Usr = U.getUser(); |
| return !isa<MemoryUse>(Usr) && Usr != MD; |
| // Defs are automatically unoptimized when the user is set to MD below, |
| // because the isOptimized() call will fail to find the same ID. |
| }); |
| } |
| |
| // and that def is now our defining access. |
| MD->setDefiningAccess(DefBefore); |
| |
| SmallVector<WeakVH, 8> FixupList(InsertedPHIs.begin(), InsertedPHIs.end()); |
| |
| SmallSet<WeakVH, 8> ExistingPhis; |
| |
| // Remember the index where we may insert new phis. |
| unsigned NewPhiIndex = InsertedPHIs.size(); |
| if (!DefBeforeSameBlock) { |
| // If there was a local def before us, we must have the same effect it |
| // did. Because every may-def is the same, any phis/etc we would create, it |
| // would also have created. If there was no local def before us, we |
| // performed a global update, and have to search all successors and make |
| // sure we update the first def in each of them (following all paths until |
| // we hit the first def along each path). This may also insert phi nodes. |
| // TODO: There are other cases we can skip this work, such as when we have a |
| // single successor, and only used a straight line of single pred blocks |
| // backwards to find the def. To make that work, we'd have to track whether |
| // getDefRecursive only ever used the single predecessor case. These types |
| // of paths also only exist in between CFG simplifications. |
| |
| // If this is the first def in the block and this insert is in an arbitrary |
| // place, compute IDF and place phis. |
| SmallPtrSet<BasicBlock *, 2> DefiningBlocks; |
| |
| // If this is the last Def in the block, we may need additional Phis. |
| // Compute IDF in all cases, as renaming needs to be done even when MD is |
| // not the last access, because it can introduce a new access past which a |
| // previous access was optimized; that access needs to be reoptimized. |
| DefiningBlocks.insert(MD->getBlock()); |
| for (const auto &VH : InsertedPHIs) |
| if (const auto *RealPHI = cast_or_null<MemoryPhi>(VH)) |
| DefiningBlocks.insert(RealPHI->getBlock()); |
| ForwardIDFCalculator IDFs(*MSSA->DT); |
| SmallVector<BasicBlock *, 32> IDFBlocks; |
| IDFs.setDefiningBlocks(DefiningBlocks); |
| IDFs.calculate(IDFBlocks); |
| SmallVector<AssertingVH<MemoryPhi>, 4> NewInsertedPHIs; |
| for (auto *BBIDF : IDFBlocks) { |
| auto *MPhi = MSSA->getMemoryAccess(BBIDF); |
| if (!MPhi) { |
| MPhi = MSSA->createMemoryPhi(BBIDF); |
| NewInsertedPHIs.push_back(MPhi); |
| } else { |
| ExistingPhis.insert(MPhi); |
| } |
| // Add the phis created into the IDF blocks to NonOptPhis, so they are not |
| // optimized out as trivial by the call to getPreviousDefFromEnd below. |
| // Once they are complete, all these Phis are added to the FixupList, and |
| // removed from NonOptPhis inside fixupDefs(). Existing Phis in IDF may |
| // need fixing as well, and potentially be trivial before this insertion, |
| // hence add all IDF Phis. See PR43044. |
| NonOptPhis.insert(MPhi); |
| } |
| for (auto &MPhi : NewInsertedPHIs) { |
| auto *BBIDF = MPhi->getBlock(); |
| for (auto *Pred : predecessors(BBIDF)) { |
| DenseMap<BasicBlock *, TrackingVH<MemoryAccess>> CachedPreviousDef; |
| MPhi->addIncoming(getPreviousDefFromEnd(Pred, CachedPreviousDef), Pred); |
| } |
| } |
| |
| // Re-take the index where we're adding the new phis, because the above call |
| // to getPreviousDefFromEnd, may have inserted into InsertedPHIs. |
| NewPhiIndex = InsertedPHIs.size(); |
| for (auto &MPhi : NewInsertedPHIs) { |
| InsertedPHIs.push_back(&*MPhi); |
| FixupList.push_back(&*MPhi); |
| } |
| |
| FixupList.push_back(MD); |
| } |
| |
| // Remember the index where we stopped inserting new phis above, since the |
| // fixupDefs call in the loop below may insert more, that are already minimal. |
| unsigned NewPhiIndexEnd = InsertedPHIs.size(); |
| |
| while (!FixupList.empty()) { |
| unsigned StartingPHISize = InsertedPHIs.size(); |
| fixupDefs(FixupList); |
| FixupList.clear(); |
| // Put any new phis on the fixup list, and process them |
| FixupList.append(InsertedPHIs.begin() + StartingPHISize, InsertedPHIs.end()); |
| } |
| |
| // Optimize potentially non-minimal phis added in this method. |
| unsigned NewPhiSize = NewPhiIndexEnd - NewPhiIndex; |
| if (NewPhiSize) |
| tryRemoveTrivialPhis(ArrayRef<WeakVH>(&InsertedPHIs[NewPhiIndex], NewPhiSize)); |
| |
| // Now that all fixups are done, rename all uses if we are asked. The defs are |
| // guaranteed to be in reachable code due to the check at the method entry. |
| BasicBlock *StartBlock = MD->getBlock(); |
| if (RenameUses) { |
| SmallPtrSet<BasicBlock *, 16> Visited; |
| // We are guaranteed there is a def in the block, because we just got it |
| // handed to us in this function. |
| MemoryAccess *FirstDef = &*MSSA->getWritableBlockDefs(StartBlock)->begin(); |
| // Convert to incoming value if it's a memorydef. A phi *is* already an |
| // incoming value. |
| if (auto *MD = dyn_cast<MemoryDef>(FirstDef)) |
| FirstDef = MD->getDefiningAccess(); |
| |
| MSSA->renamePass(MD->getBlock(), FirstDef, Visited); |
| // We just inserted a phi into this block, so the incoming value will become |
| // the phi anyway, so it does not matter what we pass. |
| for (auto &MP : InsertedPHIs) { |
| MemoryPhi *Phi = dyn_cast_or_null<MemoryPhi>(MP); |
| if (Phi) |
| MSSA->renamePass(Phi->getBlock(), nullptr, Visited); |
| } |
| // Existing Phi blocks may need renaming too, if an access was previously |
| // optimized and the inserted Defs "covers" the Optimized value. |
| for (const auto &MP : ExistingPhis) { |
| MemoryPhi *Phi = dyn_cast_or_null<MemoryPhi>(MP); |
| if (Phi) |
| MSSA->renamePass(Phi->getBlock(), nullptr, Visited); |
| } |
| } |
| } |
| |
| void MemorySSAUpdater::fixupDefs(const SmallVectorImpl<WeakVH> &Vars) { |
| SmallPtrSet<const BasicBlock *, 8> Seen; |
| SmallVector<const BasicBlock *, 16> Worklist; |
| for (const auto &Var : Vars) { |
| MemoryAccess *NewDef = dyn_cast_or_null<MemoryAccess>(Var); |
| if (!NewDef) |
| continue; |
| // First, see if there is a local def after the operand. |
| auto *Defs = MSSA->getWritableBlockDefs(NewDef->getBlock()); |
| auto DefIter = NewDef->getDefsIterator(); |
| |
| // The temporary Phi is being fixed, unmark it for not to optimize. |
| if (MemoryPhi *Phi = dyn_cast<MemoryPhi>(NewDef)) |
| NonOptPhis.erase(Phi); |
| |
| // If there is a local def after us, we only have to rename that. |
| if (++DefIter != Defs->end()) { |
| cast<MemoryDef>(DefIter)->setDefiningAccess(NewDef); |
| continue; |
| } |
| |
| // Otherwise, we need to search down through the CFG. |
| // For each of our successors, handle it directly if their is a phi, or |
| // place on the fixup worklist. |
| for (const auto *S : successors(NewDef->getBlock())) { |
| if (auto *MP = MSSA->getMemoryAccess(S)) |
| setMemoryPhiValueForBlock(MP, NewDef->getBlock(), NewDef); |
| else |
| Worklist.push_back(S); |
| } |
| |
| while (!Worklist.empty()) { |
| const BasicBlock *FixupBlock = Worklist.pop_back_val(); |
| |
| // Get the first def in the block that isn't a phi node. |
| if (auto *Defs = MSSA->getWritableBlockDefs(FixupBlock)) { |
| auto *FirstDef = &*Defs->begin(); |
| // The loop above and below should have taken care of phi nodes |
| assert(!isa<MemoryPhi>(FirstDef) && |
| "Should have already handled phi nodes!"); |
| // We are now this def's defining access, make sure we actually dominate |
| // it |
| assert(MSSA->dominates(NewDef, FirstDef) && |
| "Should have dominated the new access"); |
| |
| // This may insert new phi nodes, because we are not guaranteed the |
| // block we are processing has a single pred, and depending where the |
| // store was inserted, it may require phi nodes below it. |
| cast<MemoryDef>(FirstDef)->setDefiningAccess(getPreviousDef(FirstDef)); |
| return; |
| } |
| // We didn't find a def, so we must continue. |
| for (const auto *S : successors(FixupBlock)) { |
| // If there is a phi node, handle it. |
| // Otherwise, put the block on the worklist |
| if (auto *MP = MSSA->getMemoryAccess(S)) |
| setMemoryPhiValueForBlock(MP, FixupBlock, NewDef); |
| else { |
| // If we cycle, we should have ended up at a phi node that we already |
| // processed. FIXME: Double check this |
| if (!Seen.insert(S).second) |
| continue; |
| Worklist.push_back(S); |
| } |
| } |
| } |
| } |
| } |
| |
| void MemorySSAUpdater::removeEdge(BasicBlock *From, BasicBlock *To) { |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(To)) { |
| MPhi->unorderedDeleteIncomingBlock(From); |
| tryRemoveTrivialPhi(MPhi); |
| } |
| } |
| |
| void MemorySSAUpdater::removeDuplicatePhiEdgesBetween(const BasicBlock *From, |
| const BasicBlock *To) { |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(To)) { |
| bool Found = false; |
| MPhi->unorderedDeleteIncomingIf([&](const MemoryAccess *, BasicBlock *B) { |
| if (From != B) |
| return false; |
| if (Found) |
| return true; |
| Found = true; |
| return false; |
| }); |
| tryRemoveTrivialPhi(MPhi); |
| } |
| } |
| |
| /// If all arguments of a MemoryPHI are defined by the same incoming |
| /// argument, return that argument. |
| static MemoryAccess *onlySingleValue(MemoryPhi *MP) { |
| MemoryAccess *MA = nullptr; |
| |
| for (auto &Arg : MP->operands()) { |
| if (!MA) |
| MA = cast<MemoryAccess>(Arg); |
| else if (MA != Arg) |
| return nullptr; |
| } |
| return MA; |
| } |
| |
| static MemoryAccess *getNewDefiningAccessForClone(MemoryAccess *MA, |
| const ValueToValueMapTy &VMap, |
| PhiToDefMap &MPhiMap, |
| bool CloneWasSimplified, |
| MemorySSA *MSSA) { |
| MemoryAccess *InsnDefining = MA; |
| if (MemoryDef *DefMUD = dyn_cast<MemoryDef>(InsnDefining)) { |
| if (!MSSA->isLiveOnEntryDef(DefMUD)) { |
| Instruction *DefMUDI = DefMUD->getMemoryInst(); |
| assert(DefMUDI && "Found MemoryUseOrDef with no Instruction."); |
| if (Instruction *NewDefMUDI = |
| cast_or_null<Instruction>(VMap.lookup(DefMUDI))) { |
| InsnDefining = MSSA->getMemoryAccess(NewDefMUDI); |
| if (!CloneWasSimplified) |
| assert(InsnDefining && "Defining instruction cannot be nullptr."); |
| else if (!InsnDefining || isa<MemoryUse>(InsnDefining)) { |
| // The clone was simplified, it's no longer a MemoryDef, look up. |
| auto DefIt = DefMUD->getDefsIterator(); |
| // Since simplified clones only occur in single block cloning, a |
| // previous definition must exist, otherwise NewDefMUDI would not |
| // have been found in VMap. |
| assert(DefIt != MSSA->getBlockDefs(DefMUD->getBlock())->begin() && |
| "Previous def must exist"); |
| InsnDefining = getNewDefiningAccessForClone( |
| &*(--DefIt), VMap, MPhiMap, CloneWasSimplified, MSSA); |
| } |
| } |
| } |
| } else { |
| MemoryPhi *DefPhi = cast<MemoryPhi>(InsnDefining); |
| if (MemoryAccess *NewDefPhi = MPhiMap.lookup(DefPhi)) |
| InsnDefining = NewDefPhi; |
| } |
| assert(InsnDefining && "Defining instruction cannot be nullptr."); |
| return InsnDefining; |
| } |
| |
| void MemorySSAUpdater::cloneUsesAndDefs(BasicBlock *BB, BasicBlock *NewBB, |
| const ValueToValueMapTy &VMap, |
| PhiToDefMap &MPhiMap, |
| bool CloneWasSimplified) { |
| const MemorySSA::AccessList *Acc = MSSA->getBlockAccesses(BB); |
| if (!Acc) |
| return; |
| for (const MemoryAccess &MA : *Acc) { |
| if (const MemoryUseOrDef *MUD = dyn_cast<MemoryUseOrDef>(&MA)) { |
| Instruction *Insn = MUD->getMemoryInst(); |
| // Entry does not exist if the clone of the block did not clone all |
| // instructions. This occurs in LoopRotate when cloning instructions |
| // from the old header to the old preheader. The cloned instruction may |
| // also be a simplified Value, not an Instruction (see LoopRotate). |
| // Also in LoopRotate, even when it's an instruction, due to it being |
| // simplified, it may be a Use rather than a Def, so we cannot use MUD as |
| // template. Calls coming from updateForClonedBlockIntoPred, ensure this. |
| if (Instruction *NewInsn = |
| dyn_cast_or_null<Instruction>(VMap.lookup(Insn))) { |
| MemoryAccess *NewUseOrDef = MSSA->createDefinedAccess( |
| NewInsn, |
| getNewDefiningAccessForClone(MUD->getDefiningAccess(), VMap, |
| MPhiMap, CloneWasSimplified, MSSA), |
| /*Template=*/CloneWasSimplified ? nullptr : MUD, |
| /*CreationMustSucceed=*/CloneWasSimplified ? false : true); |
| if (NewUseOrDef) |
| MSSA->insertIntoListsForBlock(NewUseOrDef, NewBB, MemorySSA::End); |
| } |
| } |
| } |
| } |
| |
| void MemorySSAUpdater::updatePhisWhenInsertingUniqueBackedgeBlock( |
| BasicBlock *Header, BasicBlock *Preheader, BasicBlock *BEBlock) { |
| auto *MPhi = MSSA->getMemoryAccess(Header); |
| if (!MPhi) |
| return; |
| |
| // Create phi node in the backedge block and populate it with the same |
| // incoming values as MPhi. Skip incoming values coming from Preheader. |
| auto *NewMPhi = MSSA->createMemoryPhi(BEBlock); |
| bool HasUniqueIncomingValue = true; |
| MemoryAccess *UniqueValue = nullptr; |
| for (unsigned I = 0, E = MPhi->getNumIncomingValues(); I != E; ++I) { |
| BasicBlock *IBB = MPhi->getIncomingBlock(I); |
| MemoryAccess *IV = MPhi->getIncomingValue(I); |
| if (IBB != Preheader) { |
| NewMPhi->addIncoming(IV, IBB); |
| if (HasUniqueIncomingValue) { |
| if (!UniqueValue) |
| UniqueValue = IV; |
| else if (UniqueValue != IV) |
| HasUniqueIncomingValue = false; |
| } |
| } |
| } |
| |
| // Update incoming edges into MPhi. Remove all but the incoming edge from |
| // Preheader. Add an edge from NewMPhi |
| auto *AccFromPreheader = MPhi->getIncomingValueForBlock(Preheader); |
| MPhi->setIncomingValue(0, AccFromPreheader); |
| MPhi->setIncomingBlock(0, Preheader); |
| for (unsigned I = MPhi->getNumIncomingValues() - 1; I >= 1; --I) |
| MPhi->unorderedDeleteIncoming(I); |
| MPhi->addIncoming(NewMPhi, BEBlock); |
| |
| // If NewMPhi is a trivial phi, remove it. Its use in the header MPhi will be |
| // replaced with the unique value. |
| tryRemoveTrivialPhi(NewMPhi); |
| } |
| |
| void MemorySSAUpdater::updateForClonedLoop(const LoopBlocksRPO &LoopBlocks, |
| ArrayRef<BasicBlock *> ExitBlocks, |
| const ValueToValueMapTy &VMap, |
| bool IgnoreIncomingWithNoClones) { |
| PhiToDefMap MPhiMap; |
| |
| auto FixPhiIncomingValues = [&](MemoryPhi *Phi, MemoryPhi *NewPhi) { |
| assert(Phi && NewPhi && "Invalid Phi nodes."); |
| BasicBlock *NewPhiBB = NewPhi->getBlock(); |
| SmallPtrSet<BasicBlock *, 4> NewPhiBBPreds(pred_begin(NewPhiBB), |
| pred_end(NewPhiBB)); |
| for (unsigned It = 0, E = Phi->getNumIncomingValues(); It < E; ++It) { |
| MemoryAccess *IncomingAccess = Phi->getIncomingValue(It); |
| BasicBlock *IncBB = Phi->getIncomingBlock(It); |
| |
| if (BasicBlock *NewIncBB = cast_or_null<BasicBlock>(VMap.lookup(IncBB))) |
| IncBB = NewIncBB; |
| else if (IgnoreIncomingWithNoClones) |
| continue; |
| |
| // Now we have IncBB, and will need to add incoming from it to NewPhi. |
| |
| // If IncBB is not a predecessor of NewPhiBB, then do not add it. |
| // NewPhiBB was cloned without that edge. |
| if (!NewPhiBBPreds.count(IncBB)) |
| continue; |
| |
| // Determine incoming value and add it as incoming from IncBB. |
| if (MemoryUseOrDef *IncMUD = dyn_cast<MemoryUseOrDef>(IncomingAccess)) { |
| if (!MSSA->isLiveOnEntryDef(IncMUD)) { |
| Instruction *IncI = IncMUD->getMemoryInst(); |
| assert(IncI && "Found MemoryUseOrDef with no Instruction."); |
| if (Instruction *NewIncI = |
| cast_or_null<Instruction>(VMap.lookup(IncI))) { |
| IncMUD = MSSA->getMemoryAccess(NewIncI); |
| assert(IncMUD && |
| "MemoryUseOrDef cannot be null, all preds processed."); |
| } |
| } |
| NewPhi->addIncoming(IncMUD, IncBB); |
| } else { |
| MemoryPhi *IncPhi = cast<MemoryPhi>(IncomingAccess); |
| if (MemoryAccess *NewDefPhi = MPhiMap.lookup(IncPhi)) |
| NewPhi->addIncoming(NewDefPhi, IncBB); |
| else |
| NewPhi->addIncoming(IncPhi, IncBB); |
| } |
| } |
| if (auto *SingleAccess = onlySingleValue(NewPhi)) { |
| MPhiMap[Phi] = SingleAccess; |
| removeMemoryAccess(NewPhi); |
| } |
| }; |
| |
| auto ProcessBlock = [&](BasicBlock *BB) { |
| BasicBlock *NewBlock = cast_or_null<BasicBlock>(VMap.lookup(BB)); |
| if (!NewBlock) |
| return; |
| |
| assert(!MSSA->getWritableBlockAccesses(NewBlock) && |
| "Cloned block should have no accesses"); |
| |
| // Add MemoryPhi. |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(BB)) { |
| MemoryPhi *NewPhi = MSSA->createMemoryPhi(NewBlock); |
| MPhiMap[MPhi] = NewPhi; |
| } |
| // Update Uses and Defs. |
| cloneUsesAndDefs(BB, NewBlock, VMap, MPhiMap); |
| }; |
| |
| for (auto *BB : llvm::concat<BasicBlock *const>(LoopBlocks, ExitBlocks)) |
| ProcessBlock(BB); |
| |
| for (auto *BB : llvm::concat<BasicBlock *const>(LoopBlocks, ExitBlocks)) |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(BB)) |
| if (MemoryAccess *NewPhi = MPhiMap.lookup(MPhi)) |
| FixPhiIncomingValues(MPhi, cast<MemoryPhi>(NewPhi)); |
| } |
| |
| void MemorySSAUpdater::updateForClonedBlockIntoPred( |
| BasicBlock *BB, BasicBlock *P1, const ValueToValueMapTy &VM) { |
| // All defs/phis from outside BB that are used in BB, are valid uses in P1. |
| // Since those defs/phis must have dominated BB, and also dominate P1. |
| // Defs from BB being used in BB will be replaced with the cloned defs from |
| // VM. The uses of BB's Phi (if it exists) in BB will be replaced by the |
| // incoming def into the Phi from P1. |
| // Instructions cloned into the predecessor are in practice sometimes |
| // simplified, so disable the use of the template, and create an access from |
| // scratch. |
| PhiToDefMap MPhiMap; |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(BB)) |
| MPhiMap[MPhi] = MPhi->getIncomingValueForBlock(P1); |
| cloneUsesAndDefs(BB, P1, VM, MPhiMap, /*CloneWasSimplified=*/true); |
| } |
| |
| template <typename Iter> |
| void MemorySSAUpdater::privateUpdateExitBlocksForClonedLoop( |
| ArrayRef<BasicBlock *> ExitBlocks, Iter ValuesBegin, Iter ValuesEnd, |
| DominatorTree &DT) { |
| SmallVector<CFGUpdate, 4> Updates; |
| // Update/insert phis in all successors of exit blocks. |
| for (auto *Exit : ExitBlocks) |
| for (const ValueToValueMapTy *VMap : make_range(ValuesBegin, ValuesEnd)) |
| if (BasicBlock *NewExit = cast_or_null<BasicBlock>(VMap->lookup(Exit))) { |
| BasicBlock *ExitSucc = NewExit->getTerminator()->getSuccessor(0); |
| Updates.push_back({DT.Insert, NewExit, ExitSucc}); |
| } |
| applyInsertUpdates(Updates, DT); |
| } |
| |
| void MemorySSAUpdater::updateExitBlocksForClonedLoop( |
| ArrayRef<BasicBlock *> ExitBlocks, const ValueToValueMapTy &VMap, |
| DominatorTree &DT) { |
| const ValueToValueMapTy *const Arr[] = {&VMap}; |
| privateUpdateExitBlocksForClonedLoop(ExitBlocks, std::begin(Arr), |
| std::end(Arr), DT); |
| } |
| |
| void MemorySSAUpdater::updateExitBlocksForClonedLoop( |
| ArrayRef<BasicBlock *> ExitBlocks, |
| ArrayRef<std::unique_ptr<ValueToValueMapTy>> VMaps, DominatorTree &DT) { |
| auto GetPtr = [&](const std::unique_ptr<ValueToValueMapTy> &I) { |
| return I.get(); |
| }; |
| using MappedIteratorType = |
| mapped_iterator<const std::unique_ptr<ValueToValueMapTy> *, |
| decltype(GetPtr)>; |
| auto MapBegin = MappedIteratorType(VMaps.begin(), GetPtr); |
| auto MapEnd = MappedIteratorType(VMaps.end(), GetPtr); |
| privateUpdateExitBlocksForClonedLoop(ExitBlocks, MapBegin, MapEnd, DT); |
| } |
| |
| void MemorySSAUpdater::applyUpdates(ArrayRef<CFGUpdate> Updates, |
| DominatorTree &DT, bool UpdateDT) { |
| SmallVector<CFGUpdate, 4> DeleteUpdates; |
| SmallVector<CFGUpdate, 4> RevDeleteUpdates; |
| SmallVector<CFGUpdate, 4> InsertUpdates; |
| for (const auto &Update : Updates) { |
| if (Update.getKind() == DT.Insert) |
| InsertUpdates.push_back({DT.Insert, Update.getFrom(), Update.getTo()}); |
| else { |
| DeleteUpdates.push_back({DT.Delete, Update.getFrom(), Update.getTo()}); |
| RevDeleteUpdates.push_back({DT.Insert, Update.getFrom(), Update.getTo()}); |
| } |
| } |
| |
| if (!DeleteUpdates.empty()) { |
| if (!InsertUpdates.empty()) { |
| if (!UpdateDT) { |
| SmallVector<CFGUpdate, 0> Empty; |
| // Deletes are reversed applied, because this CFGView is pretending the |
| // deletes did not happen yet, hence the edges still exist. |
| DT.applyUpdates(Empty, RevDeleteUpdates); |
| } else { |
| // Apply all updates, with the RevDeleteUpdates as PostCFGView. |
| DT.applyUpdates(Updates, RevDeleteUpdates); |
| } |
| |
| // Note: the MSSA update below doesn't distinguish between a GD with |
| // (RevDelete,false) and (Delete, true), but this matters for the DT |
| // updates above; for "children" purposes they are equivalent; but the |
| // updates themselves convey the desired update, used inside DT only. |
| GraphDiff<BasicBlock *> GD(RevDeleteUpdates); |
| applyInsertUpdates(InsertUpdates, DT, &GD); |
| // Update DT to redelete edges; this matches the real CFG so we can |
| // perform the standard update without a postview of the CFG. |
| DT.applyUpdates(DeleteUpdates); |
| } else { |
| if (UpdateDT) |
| DT.applyUpdates(DeleteUpdates); |
| } |
| } else { |
| if (UpdateDT) |
| DT.applyUpdates(Updates); |
| GraphDiff<BasicBlock *> GD; |
| applyInsertUpdates(InsertUpdates, DT, &GD); |
| } |
| |
| // Update for deleted edges |
| for (auto &Update : DeleteUpdates) |
| removeEdge(Update.getFrom(), Update.getTo()); |
| } |
| |
| void MemorySSAUpdater::applyInsertUpdates(ArrayRef<CFGUpdate> Updates, |
| DominatorTree &DT) { |
| GraphDiff<BasicBlock *> GD; |
| applyInsertUpdates(Updates, DT, &GD); |
| } |
| |
| void MemorySSAUpdater::applyInsertUpdates(ArrayRef<CFGUpdate> Updates, |
| DominatorTree &DT, |
| const GraphDiff<BasicBlock *> *GD) { |
| // Get recursive last Def, assuming well formed MSSA and updated DT. |
| auto GetLastDef = [&](BasicBlock *BB) -> MemoryAccess * { |
| while (true) { |
| MemorySSA::DefsList *Defs = MSSA->getWritableBlockDefs(BB); |
| // Return last Def or Phi in BB, if it exists. |
| if (Defs) |
| return &*(--Defs->end()); |
| |
| // Check number of predecessors, we only care if there's more than one. |
| unsigned Count = 0; |
| BasicBlock *Pred = nullptr; |
| for (auto *Pi : GD->template getChildren</*InverseEdge=*/true>(BB)) { |
| Pred = Pi; |
| Count++; |
| if (Count == 2) |
| break; |
| } |
| |
| // If BB has multiple predecessors, get last definition from IDom. |
| if (Count != 1) { |
| // [SimpleLoopUnswitch] If BB is a dead block, about to be deleted, its |
| // DT is invalidated. Return LoE as its last def. This will be added to |
| // MemoryPhi node, and later deleted when the block is deleted. |
| if (!DT.getNode(BB)) |
| return MSSA->getLiveOnEntryDef(); |
| if (auto *IDom = DT.getNode(BB)->getIDom()) |
| if (IDom->getBlock() != BB) { |
| BB = IDom->getBlock(); |
| continue; |
| } |
| return MSSA->getLiveOnEntryDef(); |
| } else { |
| // Single predecessor, BB cannot be dead. GetLastDef of Pred. |
| assert(Count == 1 && Pred && "Single predecessor expected."); |
| // BB can be unreachable though, return LoE if that is the case. |
| if (!DT.getNode(BB)) |
| return MSSA->getLiveOnEntryDef(); |
| BB = Pred; |
| } |
| }; |
| llvm_unreachable("Unable to get last definition."); |
| }; |
| |
| // Get nearest IDom given a set of blocks. |
| // TODO: this can be optimized by starting the search at the node with the |
| // lowest level (highest in the tree). |
| auto FindNearestCommonDominator = |
| [&](const SmallSetVector<BasicBlock *, 2> &BBSet) -> BasicBlock * { |
| BasicBlock *PrevIDom = *BBSet.begin(); |
| for (auto *BB : BBSet) |
| PrevIDom = DT.findNearestCommonDominator(PrevIDom, BB); |
| return PrevIDom; |
| }; |
| |
| // Get all blocks that dominate PrevIDom, stop when reaching CurrIDom. Do not |
| // include CurrIDom. |
| auto GetNoLongerDomBlocks = |
| [&](BasicBlock *PrevIDom, BasicBlock *CurrIDom, |
| SmallVectorImpl<BasicBlock *> &BlocksPrevDom) { |
| if (PrevIDom == CurrIDom) |
| return; |
| BlocksPrevDom.push_back(PrevIDom); |
| BasicBlock *NextIDom = PrevIDom; |
| while (BasicBlock *UpIDom = |
| DT.getNode(NextIDom)->getIDom()->getBlock()) { |
| if (UpIDom == CurrIDom) |
| break; |
| BlocksPrevDom.push_back(UpIDom); |
| NextIDom = UpIDom; |
| } |
| }; |
| |
| // Map a BB to its predecessors: added + previously existing. To get a |
| // deterministic order, store predecessors as SetVectors. The order in each |
| // will be defined by the order in Updates (fixed) and the order given by |
| // children<> (also fixed). Since we further iterate over these ordered sets, |
| // we lose the information of multiple edges possibly existing between two |
| // blocks, so we'll keep and EdgeCount map for that. |
| // An alternate implementation could keep unordered set for the predecessors, |
| // traverse either Updates or children<> each time to get the deterministic |
| // order, and drop the usage of EdgeCount. This alternate approach would still |
| // require querying the maps for each predecessor, and children<> call has |
| // additional computation inside for creating the snapshot-graph predecessors. |
| // As such, we favor using a little additional storage and less compute time. |
| // This decision can be revisited if we find the alternative more favorable. |
| |
| struct PredInfo { |
| SmallSetVector<BasicBlock *, 2> Added; |
| SmallSetVector<BasicBlock *, 2> Prev; |
| }; |
| SmallDenseMap<BasicBlock *, PredInfo> PredMap; |
| |
| for (const auto &Edge : Updates) { |
| BasicBlock *BB = Edge.getTo(); |
| auto &AddedBlockSet = PredMap[BB].Added; |
| AddedBlockSet.insert(Edge.getFrom()); |
| } |
| |
| // Store all existing predecessor for each BB, at least one must exist. |
| SmallDenseMap<std::pair<BasicBlock *, BasicBlock *>, int> EdgeCountMap; |
| SmallPtrSet<BasicBlock *, 2> NewBlocks; |
| for (auto &BBPredPair : PredMap) { |
| auto *BB = BBPredPair.first; |
| const auto &AddedBlockSet = BBPredPair.second.Added; |
| auto &PrevBlockSet = BBPredPair.second.Prev; |
| for (auto *Pi : GD->template getChildren</*InverseEdge=*/true>(BB)) { |
| if (!AddedBlockSet.count(Pi)) |
| PrevBlockSet.insert(Pi); |
| EdgeCountMap[{Pi, BB}]++; |
| } |
| |
| if (PrevBlockSet.empty()) { |
| assert(pred_size(BB) == AddedBlockSet.size() && "Duplicate edges added."); |
| LLVM_DEBUG( |
| dbgs() |
| << "Adding a predecessor to a block with no predecessors. " |
| "This must be an edge added to a new, likely cloned, block. " |
| "Its memory accesses must be already correct, assuming completed " |
| "via the updateExitBlocksForClonedLoop API. " |
| "Assert a single such edge is added so no phi addition or " |
| "additional processing is required.\n"); |
| assert(AddedBlockSet.size() == 1 && |
| "Can only handle adding one predecessor to a new block."); |
| // Need to remove new blocks from PredMap. Remove below to not invalidate |
| // iterator here. |
| NewBlocks.insert(BB); |
| } |
| } |
| // Nothing to process for new/cloned blocks. |
| for (auto *BB : NewBlocks) |
| PredMap.erase(BB); |
| |
| SmallVector<BasicBlock *, 16> BlocksWithDefsToReplace; |
| SmallVector<WeakVH, 8> InsertedPhis; |
| |
| // First create MemoryPhis in all blocks that don't have one. Create in the |
| // order found in Updates, not in PredMap, to get deterministic numbering. |
| for (const auto &Edge : Updates) { |
| BasicBlock *BB = Edge.getTo(); |
| if (PredMap.count(BB) && !MSSA->getMemoryAccess(BB)) |
| InsertedPhis.push_back(MSSA->createMemoryPhi(BB)); |
| } |
| |
| // Now we'll fill in the MemoryPhis with the right incoming values. |
| for (auto &BBPredPair : PredMap) { |
| auto *BB = BBPredPair.first; |
| const auto &PrevBlockSet = BBPredPair.second.Prev; |
| const auto &AddedBlockSet = BBPredPair.second.Added; |
| assert(!PrevBlockSet.empty() && |
| "At least one previous predecessor must exist."); |
| |
| // TODO: if this becomes a bottleneck, we can save on GetLastDef calls by |
| // keeping this map before the loop. We can reuse already populated entries |
| // if an edge is added from the same predecessor to two different blocks, |
| // and this does happen in rotate. Note that the map needs to be updated |
| // when deleting non-necessary phis below, if the phi is in the map by |
| // replacing the value with DefP1. |
| SmallDenseMap<BasicBlock *, MemoryAccess *> LastDefAddedPred; |
| for (auto *AddedPred : AddedBlockSet) { |
| auto *DefPn = GetLastDef(AddedPred); |
| assert(DefPn != nullptr && "Unable to find last definition."); |
| LastDefAddedPred[AddedPred] = DefPn; |
| } |
| |
| MemoryPhi *NewPhi = MSSA->getMemoryAccess(BB); |
| // If Phi is not empty, add an incoming edge from each added pred. Must |
| // still compute blocks with defs to replace for this block below. |
| if (NewPhi->getNumOperands()) { |
| for (auto *Pred : AddedBlockSet) { |
| auto *LastDefForPred = LastDefAddedPred[Pred]; |
| for (int I = 0, E = EdgeCountMap[{Pred, BB}]; I < E; ++I) |
| NewPhi->addIncoming(LastDefForPred, Pred); |
| } |
| } else { |
| // Pick any existing predecessor and get its definition. All other |
| // existing predecessors should have the same one, since no phi existed. |
| auto *P1 = *PrevBlockSet.begin(); |
| MemoryAccess *DefP1 = GetLastDef(P1); |
| |
| // Check DefP1 against all Defs in LastDefPredPair. If all the same, |
| // nothing to add. |
| bool InsertPhi = false; |
| for (auto LastDefPredPair : LastDefAddedPred) |
| if (DefP1 != LastDefPredPair.second) { |
| InsertPhi = true; |
| break; |
| } |
| if (!InsertPhi) { |
| // Since NewPhi may be used in other newly added Phis, replace all uses |
| // of NewPhi with the definition coming from all predecessors (DefP1), |
| // before deleting it. |
| NewPhi->replaceAllUsesWith(DefP1); |
| removeMemoryAccess(NewPhi); |
| continue; |
| } |
| |
| // Update Phi with new values for new predecessors and old value for all |
| // other predecessors. Since AddedBlockSet and PrevBlockSet are ordered |
| // sets, the order of entries in NewPhi is deterministic. |
| for (auto *Pred : AddedBlockSet) { |
| auto *LastDefForPred = LastDefAddedPred[Pred]; |
| for (int I = 0, E = EdgeCountMap[{Pred, BB}]; I < E; ++I) |
| NewPhi->addIncoming(LastDefForPred, Pred); |
| } |
| for (auto *Pred : PrevBlockSet) |
| for (int I = 0, E = EdgeCountMap[{Pred, BB}]; I < E; ++I) |
| NewPhi->addIncoming(DefP1, Pred); |
| } |
| |
| // Get all blocks that used to dominate BB and no longer do after adding |
| // AddedBlockSet, where PrevBlockSet are the previously known predecessors. |
| assert(DT.getNode(BB)->getIDom() && "BB does not have valid idom"); |
| BasicBlock *PrevIDom = FindNearestCommonDominator(PrevBlockSet); |
| assert(PrevIDom && "Previous IDom should exists"); |
| BasicBlock *NewIDom = DT.getNode(BB)->getIDom()->getBlock(); |
| assert(NewIDom && "BB should have a new valid idom"); |
| assert(DT.dominates(NewIDom, PrevIDom) && |
| "New idom should dominate old idom"); |
| GetNoLongerDomBlocks(PrevIDom, NewIDom, BlocksWithDefsToReplace); |
| } |
| |
| tryRemoveTrivialPhis(InsertedPhis); |
| // Create the set of blocks that now have a definition. We'll use this to |
| // compute IDF and add Phis there next. |
| SmallVector<BasicBlock *, 8> BlocksToProcess; |
| for (auto &VH : InsertedPhis) |
| if (auto *MPhi = cast_or_null<MemoryPhi>(VH)) |
| BlocksToProcess.push_back(MPhi->getBlock()); |
| |
| // Compute IDF and add Phis in all IDF blocks that do not have one. |
| SmallVector<BasicBlock *, 32> IDFBlocks; |
| if (!BlocksToProcess.empty()) { |
| ForwardIDFCalculator IDFs(DT, GD); |
| SmallPtrSet<BasicBlock *, 16> DefiningBlocks(BlocksToProcess.begin(), |
| BlocksToProcess.end()); |
| IDFs.setDefiningBlocks(DefiningBlocks); |
| IDFs.calculate(IDFBlocks); |
| |
| SmallSetVector<MemoryPhi *, 4> PhisToFill; |
| // First create all needed Phis. |
| for (auto *BBIDF : IDFBlocks) |
| if (!MSSA->getMemoryAccess(BBIDF)) { |
| auto *IDFPhi = MSSA->createMemoryPhi(BBIDF); |
| InsertedPhis.push_back(IDFPhi); |
| PhisToFill.insert(IDFPhi); |
| } |
| // Then update or insert their correct incoming values. |
| for (auto *BBIDF : IDFBlocks) { |
| auto *IDFPhi = MSSA->getMemoryAccess(BBIDF); |
| assert(IDFPhi && "Phi must exist"); |
| if (!PhisToFill.count(IDFPhi)) { |
| // Update existing Phi. |
| // FIXME: some updates may be redundant, try to optimize and skip some. |
| for (unsigned I = 0, E = IDFPhi->getNumIncomingValues(); I < E; ++I) |
| IDFPhi->setIncomingValue(I, GetLastDef(IDFPhi->getIncomingBlock(I))); |
| } else { |
| for (auto *Pi : GD->template getChildren</*InverseEdge=*/true>(BBIDF)) |
| IDFPhi->addIncoming(GetLastDef(Pi), Pi); |
| } |
| } |
| } |
| |
| // Now for all defs in BlocksWithDefsToReplace, if there are uses they no |
| // longer dominate, replace those with the closest dominating def. |
| // This will also update optimized accesses, as they're also uses. |
| for (auto *BlockWithDefsToReplace : BlocksWithDefsToReplace) { |
| if (auto DefsList = MSSA->getWritableBlockDefs(BlockWithDefsToReplace)) { |
| for (auto &DefToReplaceUses : *DefsList) { |
| BasicBlock *DominatingBlock = DefToReplaceUses.getBlock(); |
| for (Use &U : llvm::make_early_inc_range(DefToReplaceUses.uses())) { |
| MemoryAccess *Usr = cast<MemoryAccess>(U.getUser()); |
| if (MemoryPhi *UsrPhi = dyn_cast<MemoryPhi>(Usr)) { |
| BasicBlock *DominatedBlock = UsrPhi->getIncomingBlock(U); |
| if (!DT.dominates(DominatingBlock, DominatedBlock)) |
| U.set(GetLastDef(DominatedBlock)); |
| } else { |
| BasicBlock *DominatedBlock = Usr->getBlock(); |
| if (!DT.dominates(DominatingBlock, DominatedBlock)) { |
| if (auto *DomBlPhi = MSSA->getMemoryAccess(DominatedBlock)) |
| U.set(DomBlPhi); |
| else { |
| auto *IDom = DT.getNode(DominatedBlock)->getIDom(); |
| assert(IDom && "Block must have a valid IDom."); |
| U.set(GetLastDef(IDom->getBlock())); |
| } |
| cast<MemoryUseOrDef>(Usr)->resetOptimized(); |
| } |
| } |
| } |
| } |
| } |
| } |
| tryRemoveTrivialPhis(InsertedPhis); |
| } |
| |
| // Move What before Where in the MemorySSA IR. |
| template <class WhereType> |
| void MemorySSAUpdater::moveTo(MemoryUseOrDef *What, BasicBlock *BB, |
| WhereType Where) { |
| // Mark MemoryPhi users of What not to be optimized. |
| for (auto *U : What->users()) |
| if (MemoryPhi *PhiUser = dyn_cast<MemoryPhi>(U)) |
| NonOptPhis.insert(PhiUser); |
| |
| // Replace all our users with our defining access. |
| What->replaceAllUsesWith(What->getDefiningAccess()); |
| |
| // Let MemorySSA take care of moving it around in the lists. |
| MSSA->moveTo(What, BB, Where); |
| |
| // Now reinsert it into the IR and do whatever fixups needed. |
| if (auto *MD = dyn_cast<MemoryDef>(What)) |
| insertDef(MD, /*RenameUses=*/true); |
| else |
| insertUse(cast<MemoryUse>(What), /*RenameUses=*/true); |
| |
| // Clear dangling pointers. We added all MemoryPhi users, but not all |
| // of them are removed by fixupDefs(). |
| NonOptPhis.clear(); |
| } |
| |
| // Move What before Where in the MemorySSA IR. |
| void MemorySSAUpdater::moveBefore(MemoryUseOrDef *What, MemoryUseOrDef *Where) { |
| moveTo(What, Where->getBlock(), Where->getIterator()); |
| } |
| |
| // Move What after Where in the MemorySSA IR. |
| void MemorySSAUpdater::moveAfter(MemoryUseOrDef *What, MemoryUseOrDef *Where) { |
| moveTo(What, Where->getBlock(), ++Where->getIterator()); |
| } |
| |
| void MemorySSAUpdater::moveToPlace(MemoryUseOrDef *What, BasicBlock *BB, |
| MemorySSA::InsertionPlace Where) { |
| if (Where != MemorySSA::InsertionPlace::BeforeTerminator) |
| return moveTo(What, BB, Where); |
| |
| if (auto *Where = MSSA->getMemoryAccess(BB->getTerminator())) |
| return moveBefore(What, Where); |
| else |
| return moveTo(What, BB, MemorySSA::InsertionPlace::End); |
| } |
| |
| // All accesses in To used to be in From. Move to end and update access lists. |
| void MemorySSAUpdater::moveAllAccesses(BasicBlock *From, BasicBlock *To, |
| Instruction *Start) { |
| |
| MemorySSA::AccessList *Accs = MSSA->getWritableBlockAccesses(From); |
| if (!Accs) |
| return; |
| |
| assert(Start->getParent() == To && "Incorrect Start instruction"); |
| MemoryAccess *FirstInNew = nullptr; |
| for (Instruction &I : make_range(Start->getIterator(), To->end())) |
| if ((FirstInNew = MSSA->getMemoryAccess(&I))) |
| break; |
| if (FirstInNew) { |
| auto *MUD = cast<MemoryUseOrDef>(FirstInNew); |
| do { |
| auto NextIt = ++MUD->getIterator(); |
| MemoryUseOrDef *NextMUD = (!Accs || NextIt == Accs->end()) |
| ? nullptr |
| : cast<MemoryUseOrDef>(&*NextIt); |
| MSSA->moveTo(MUD, To, MemorySSA::End); |
| // Moving MUD from Accs in the moveTo above, may delete Accs, so we need |
| // to retrieve it again. |
| Accs = MSSA->getWritableBlockAccesses(From); |
| MUD = NextMUD; |
| } while (MUD); |
| } |
| |
| // If all accesses were moved and only a trivial Phi remains, we try to remove |
| // that Phi. This is needed when From is going to be deleted. |
| auto *Defs = MSSA->getWritableBlockDefs(From); |
| if (Defs && !Defs->empty()) |
| if (auto *Phi = dyn_cast<MemoryPhi>(&*Defs->begin())) |
| tryRemoveTrivialPhi(Phi); |
| } |
| |
| void MemorySSAUpdater::moveAllAfterSpliceBlocks(BasicBlock *From, |
| BasicBlock *To, |
| Instruction *Start) { |
| assert(MSSA->getBlockAccesses(To) == nullptr && |
| "To block is expected to be free of MemoryAccesses."); |
| moveAllAccesses(From, To, Start); |
| for (BasicBlock *Succ : successors(To)) |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(Succ)) |
| MPhi->setIncomingBlock(MPhi->getBasicBlockIndex(From), To); |
| } |
| |
| void MemorySSAUpdater::moveAllAfterMergeBlocks(BasicBlock *From, BasicBlock *To, |
| Instruction *Start) { |
| assert(From->getUniquePredecessor() == To && |
| "From block is expected to have a single predecessor (To)."); |
| moveAllAccesses(From, To, Start); |
| for (BasicBlock *Succ : successors(From)) |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(Succ)) |
| MPhi->setIncomingBlock(MPhi->getBasicBlockIndex(From), To); |
| } |
| |
| void MemorySSAUpdater::wireOldPredecessorsToNewImmediatePredecessor( |
| BasicBlock *Old, BasicBlock *New, ArrayRef<BasicBlock *> Preds, |
| bool IdenticalEdgesWereMerged) { |
| assert(!MSSA->getWritableBlockAccesses(New) && |
| "Access list should be null for a new block."); |
| MemoryPhi *Phi = MSSA->getMemoryAccess(Old); |
| if (!Phi) |
| return; |
| if (Old->hasNPredecessors(1)) { |
| assert(pred_size(New) == Preds.size() && |
| "Should have moved all predecessors."); |
| MSSA->moveTo(Phi, New, MemorySSA::Beginning); |
| } else { |
| assert(!Preds.empty() && "Must be moving at least one predecessor to the " |
| "new immediate predecessor."); |
| MemoryPhi *NewPhi = MSSA->createMemoryPhi(New); |
| SmallPtrSet<BasicBlock *, 16> PredsSet(Preds.begin(), Preds.end()); |
| // Currently only support the case of removing a single incoming edge when |
| // identical edges were not merged. |
| if (!IdenticalEdgesWereMerged) |
| assert(PredsSet.size() == Preds.size() && |
| "If identical edges were not merged, we cannot have duplicate " |
| "blocks in the predecessors"); |
| Phi->unorderedDeleteIncomingIf([&](MemoryAccess *MA, BasicBlock *B) { |
| if (PredsSet.count(B)) { |
| NewPhi->addIncoming(MA, B); |
| if (!IdenticalEdgesWereMerged) |
| PredsSet.erase(B); |
| return true; |
| } |
| return false; |
| }); |
| Phi->addIncoming(NewPhi, New); |
| tryRemoveTrivialPhi(NewPhi); |
| } |
| } |
| |
| void MemorySSAUpdater::removeMemoryAccess(MemoryAccess *MA, bool OptimizePhis) { |
| assert(!MSSA->isLiveOnEntryDef(MA) && |
| "Trying to remove the live on entry def"); |
| // We can only delete phi nodes if they have no uses, or we can replace all |
| // uses with a single definition. |
| MemoryAccess *NewDefTarget = nullptr; |
| if (MemoryPhi *MP = dyn_cast<MemoryPhi>(MA)) { |
| // Note that it is sufficient to know that all edges of the phi node have |
| // the same argument. If they do, by the definition of dominance frontiers |
| // (which we used to place this phi), that argument must dominate this phi, |
| // and thus, must dominate the phi's uses, and so we will not hit the assert |
| // below. |
| NewDefTarget = onlySingleValue(MP); |
| assert((NewDefTarget || MP->use_empty()) && |
| "We can't delete this memory phi"); |
| } else { |
| NewDefTarget = cast<MemoryUseOrDef>(MA)->getDefiningAccess(); |
| } |
| |
| SmallSetVector<MemoryPhi *, 4> PhisToCheck; |
| |
| // Re-point the uses at our defining access |
| if (!isa<MemoryUse>(MA) && !MA->use_empty()) { |
| // Reset optimized on users of this store, and reset the uses. |
| // A few notes: |
| // 1. This is a slightly modified version of RAUW to avoid walking the |
| // uses twice here. |
| // 2. If we wanted to be complete, we would have to reset the optimized |
| // flags on users of phi nodes if doing the below makes a phi node have all |
| // the same arguments. Instead, we prefer users to removeMemoryAccess those |
| // phi nodes, because doing it here would be N^3. |
| if (MA->hasValueHandle()) |
| ValueHandleBase::ValueIsRAUWd(MA, NewDefTarget); |
| // Note: We assume MemorySSA is not used in metadata since it's not really |
| // part of the IR. |
| |
| assert(NewDefTarget != MA && "Going into an infinite loop"); |
| while (!MA->use_empty()) { |
| Use &U = *MA->use_begin(); |
| if (auto *MUD = dyn_cast<MemoryUseOrDef>(U.getUser())) |
| MUD->resetOptimized(); |
| if (OptimizePhis) |
| if (MemoryPhi *MP = dyn_cast<MemoryPhi>(U.getUser())) |
| PhisToCheck.insert(MP); |
| U.set(NewDefTarget); |
| } |
| } |
| |
| // The call below to erase will destroy MA, so we can't change the order we |
| // are doing things here |
| MSSA->removeFromLookups(MA); |
| MSSA->removeFromLists(MA); |
| |
| // Optionally optimize Phi uses. This will recursively remove trivial phis. |
| if (!PhisToCheck.empty()) { |
| SmallVector<WeakVH, 16> PhisToOptimize{PhisToCheck.begin(), |
| PhisToCheck.end()}; |
| PhisToCheck.clear(); |
| |
| unsigned PhisSize = PhisToOptimize.size(); |
| while (PhisSize-- > 0) |
| if (MemoryPhi *MP = |
| cast_or_null<MemoryPhi>(PhisToOptimize.pop_back_val())) |
| tryRemoveTrivialPhi(MP); |
| } |
| } |
| |
| void MemorySSAUpdater::removeBlocks( |
| const SmallSetVector<BasicBlock *, 8> &DeadBlocks) { |
| // First delete all uses of BB in MemoryPhis. |
| for (BasicBlock *BB : DeadBlocks) { |
| Instruction *TI = BB->getTerminator(); |
| assert(TI && "Basic block expected to have a terminator instruction"); |
| for (BasicBlock *Succ : successors(TI)) |
| if (!DeadBlocks.count(Succ)) |
| if (MemoryPhi *MP = MSSA->getMemoryAccess(Succ)) { |
| MP->unorderedDeleteIncomingBlock(BB); |
| tryRemoveTrivialPhi(MP); |
| } |
| // Drop all references of all accesses in BB |
| if (MemorySSA::AccessList *Acc = MSSA->getWritableBlockAccesses(BB)) |
| for (MemoryAccess &MA : *Acc) |
| MA.dropAllReferences(); |
| } |
| |
| // Next, delete all memory accesses in each block |
| for (BasicBlock *BB : DeadBlocks) { |
| MemorySSA::AccessList *Acc = MSSA->getWritableBlockAccesses(BB); |
| if (!Acc) |
| continue; |
| for (MemoryAccess &MA : llvm::make_early_inc_range(*Acc)) { |
| MSSA->removeFromLookups(&MA); |
| MSSA->removeFromLists(&MA); |
| } |
| } |
| } |
| |
| void MemorySSAUpdater::tryRemoveTrivialPhis(ArrayRef<WeakVH> UpdatedPHIs) { |
| for (const auto &VH : UpdatedPHIs) |
| if (auto *MPhi = cast_or_null<MemoryPhi>(VH)) |
| tryRemoveTrivialPhi(MPhi); |
| } |
| |
| void MemorySSAUpdater::changeToUnreachable(const Instruction *I) { |
| const BasicBlock *BB = I->getParent(); |
| // Remove memory accesses in BB for I and all following instructions. |
| auto BBI = I->getIterator(), BBE = BB->end(); |
| // FIXME: If this becomes too expensive, iterate until the first instruction |
| // with a memory access, then iterate over MemoryAccesses. |
| while (BBI != BBE) |
| removeMemoryAccess(&*(BBI++)); |
| // Update phis in BB's successors to remove BB. |
| SmallVector<WeakVH, 16> UpdatedPHIs; |
| for (const BasicBlock *Successor : successors(BB)) { |
| removeDuplicatePhiEdgesBetween(BB, Successor); |
| if (MemoryPhi *MPhi = MSSA->getMemoryAccess(Successor)) { |
| MPhi->unorderedDeleteIncomingBlock(BB); |
| UpdatedPHIs.push_back(MPhi); |
| } |
| } |
| // Optimize trivial phis. |
| tryRemoveTrivialPhis(UpdatedPHIs); |
| } |
| |
| MemoryAccess *MemorySSAUpdater::createMemoryAccessInBB( |
| Instruction *I, MemoryAccess *Definition, const BasicBlock *BB, |
| MemorySSA::InsertionPlace Point) { |
| MemoryUseOrDef *NewAccess = MSSA->createDefinedAccess(I, Definition); |
| MSSA->insertIntoListsForBlock(NewAccess, BB, Point); |
| return NewAccess; |
| } |
| |
| MemoryUseOrDef *MemorySSAUpdater::createMemoryAccessBefore( |
| Instruction *I, MemoryAccess *Definition, MemoryUseOrDef *InsertPt) { |
| assert(I->getParent() == InsertPt->getBlock() && |
| "New and old access must be in the same block"); |
| MemoryUseOrDef *NewAccess = MSSA->createDefinedAccess(I, Definition); |
| MSSA->insertIntoListsBefore(NewAccess, InsertPt->getBlock(), |
| InsertPt->getIterator()); |
| return NewAccess; |
| } |
| |
| MemoryUseOrDef *MemorySSAUpdater::createMemoryAccessAfter( |
| Instruction *I, MemoryAccess *Definition, MemoryAccess *InsertPt) { |
| assert(I->getParent() == InsertPt->getBlock() && |
| "New and old access must be in the same block"); |
| MemoryUseOrDef *NewAccess = MSSA->createDefinedAccess(I, Definition); |
| MSSA->insertIntoListsBefore(NewAccess, InsertPt->getBlock(), |
| ++InsertPt->getIterator()); |
| return NewAccess; |
| } |