| // Copyright (c) 2018 The Khronos Group Inc. |
| // Copyright (c) 2018 Valve Corporation |
| // Copyright (c) 2018 LunarG Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "instrument_pass.h" |
| |
| #include "source/cfa.h" |
| #include "source/spirv_constant.h" |
| |
| namespace { |
| |
| // Common Parameter Positions |
| static const int kInstCommonParamInstIdx = 0; |
| static const int kInstCommonParamCnt = 1; |
| |
| // Indices of operands in SPIR-V instructions |
| static const int kEntryPointExecutionModelInIdx = 0; |
| static const int kEntryPointFunctionIdInIdx = 1; |
| |
| } // anonymous namespace |
| |
| namespace spvtools { |
| namespace opt { |
| |
| void InstrumentPass::MovePreludeCode( |
| BasicBlock::iterator ref_inst_itr, |
| UptrVectorIterator<BasicBlock> ref_block_itr, |
| std::unique_ptr<BasicBlock>* new_blk_ptr) { |
| same_block_pre_.clear(); |
| same_block_post_.clear(); |
| // Initialize new block. Reuse label from original block. |
| new_blk_ptr->reset(new BasicBlock(std::move(ref_block_itr->GetLabel()))); |
| // Move contents of original ref block up to ref instruction. |
| for (auto cii = ref_block_itr->begin(); cii != ref_inst_itr; |
| cii = ref_block_itr->begin()) { |
| Instruction* inst = &*cii; |
| inst->RemoveFromList(); |
| std::unique_ptr<Instruction> mv_ptr(inst); |
| // Remember same-block ops for possible regeneration. |
| if (IsSameBlockOp(&*mv_ptr)) { |
| auto* sb_inst_ptr = mv_ptr.get(); |
| same_block_pre_[mv_ptr->result_id()] = sb_inst_ptr; |
| } |
| (*new_blk_ptr)->AddInstruction(std::move(mv_ptr)); |
| } |
| } |
| |
| void InstrumentPass::MovePostludeCode( |
| UptrVectorIterator<BasicBlock> ref_block_itr, BasicBlock* new_blk_ptr) { |
| // new_blk_ptr->reset(new BasicBlock(NewLabel(ref_block_itr->id()))); |
| // Move contents of original ref block. |
| for (auto cii = ref_block_itr->begin(); cii != ref_block_itr->end(); |
| cii = ref_block_itr->begin()) { |
| Instruction* inst = &*cii; |
| inst->RemoveFromList(); |
| std::unique_ptr<Instruction> mv_inst(inst); |
| // Regenerate any same-block instruction that has not been seen in the |
| // current block. |
| if (same_block_pre_.size() > 0) { |
| CloneSameBlockOps(&mv_inst, &same_block_post_, &same_block_pre_, |
| new_blk_ptr); |
| // Remember same-block ops in this block. |
| if (IsSameBlockOp(&*mv_inst)) { |
| const uint32_t rid = mv_inst->result_id(); |
| same_block_post_[rid] = rid; |
| } |
| } |
| new_blk_ptr->AddInstruction(std::move(mv_inst)); |
| } |
| } |
| |
| std::unique_ptr<Instruction> InstrumentPass::NewLabel(uint32_t label_id) { |
| std::unique_ptr<Instruction> newLabel( |
| new Instruction(context(), SpvOpLabel, 0, label_id, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*newLabel); |
| return newLabel; |
| } |
| |
| uint32_t InstrumentPass::GenUintCastCode(uint32_t val_id, |
| InstructionBuilder* builder) { |
| // Cast value to 32-bit unsigned if necessary |
| if (get_def_use_mgr()->GetDef(val_id)->type_id() == GetUintId()) |
| return val_id; |
| return builder->AddUnaryOp(GetUintId(), SpvOpBitcast, val_id)->result_id(); |
| } |
| |
| void InstrumentPass::GenDebugOutputFieldCode(uint32_t base_offset_id, |
| uint32_t field_offset, |
| uint32_t field_value_id, |
| InstructionBuilder* builder) { |
| // Cast value to 32-bit unsigned if necessary |
| uint32_t val_id = GenUintCastCode(field_value_id, builder); |
| // Store value |
| Instruction* data_idx_inst = |
| builder->AddBinaryOp(GetUintId(), SpvOpIAdd, base_offset_id, |
| builder->GetUintConstantId(field_offset)); |
| uint32_t buf_id = GetOutputBufferId(); |
| uint32_t buf_uint_ptr_id = GetOutputBufferPtrId(); |
| Instruction* achain_inst = |
| builder->AddTernaryOp(buf_uint_ptr_id, SpvOpAccessChain, buf_id, |
| builder->GetUintConstantId(kDebugOutputDataOffset), |
| data_idx_inst->result_id()); |
| (void)builder->AddBinaryOp(0, SpvOpStore, achain_inst->result_id(), val_id); |
| } |
| |
| void InstrumentPass::GenCommonStreamWriteCode(uint32_t record_sz, |
| uint32_t inst_id, |
| uint32_t stage_idx, |
| uint32_t base_offset_id, |
| InstructionBuilder* builder) { |
| // Store record size |
| GenDebugOutputFieldCode(base_offset_id, kInstCommonOutSize, |
| builder->GetUintConstantId(record_sz), builder); |
| // Store Shader Id |
| GenDebugOutputFieldCode(base_offset_id, kInstCommonOutShaderId, |
| builder->GetUintConstantId(shader_id_), builder); |
| // Store Instruction Idx |
| GenDebugOutputFieldCode(base_offset_id, kInstCommonOutInstructionIdx, inst_id, |
| builder); |
| // Store Stage Idx |
| GenDebugOutputFieldCode(base_offset_id, kInstCommonOutStageIdx, |
| builder->GetUintConstantId(stage_idx), builder); |
| } |
| |
| void InstrumentPass::GenFragCoordEltDebugOutputCode( |
| uint32_t base_offset_id, uint32_t uint_frag_coord_id, uint32_t element, |
| InstructionBuilder* builder) { |
| Instruction* element_val_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, uint_frag_coord_id, element); |
| GenDebugOutputFieldCode(base_offset_id, kInstFragOutFragCoordX + element, |
| element_val_inst->result_id(), builder); |
| } |
| |
| uint32_t InstrumentPass::GenVarLoad(uint32_t var_id, |
| InstructionBuilder* builder) { |
| Instruction* var_inst = get_def_use_mgr()->GetDef(var_id); |
| uint32_t type_id = GetPointeeTypeId(var_inst); |
| Instruction* load_inst = builder->AddUnaryOp(type_id, SpvOpLoad, var_id); |
| return load_inst->result_id(); |
| } |
| |
| void InstrumentPass::GenBuiltinOutputCode(uint32_t builtin_id, |
| uint32_t builtin_off, |
| uint32_t base_offset_id, |
| InstructionBuilder* builder) { |
| // Load and store builtin |
| uint32_t load_id = GenVarLoad(builtin_id, builder); |
| GenDebugOutputFieldCode(base_offset_id, builtin_off, load_id, builder); |
| } |
| |
| void InstrumentPass::GenStageStreamWriteCode(uint32_t stage_idx, |
| uint32_t base_offset_id, |
| InstructionBuilder* builder) { |
| // TODO(greg-lunarg): Add support for all stages |
| switch (stage_idx) { |
| case SpvExecutionModelVertex: { |
| // Load and store VertexId and InstanceId |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInVertexIndex), |
| kInstVertOutVertexIndex, base_offset_id, builder); |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInInstanceIndex), |
| kInstVertOutInstanceIndex, base_offset_id, builder); |
| } break; |
| case SpvExecutionModelGLCompute: { |
| // Load and store GlobalInvocationId. |
| uint32_t load_id = GenVarLoad( |
| context()->GetBuiltinInputVarId(SpvBuiltInGlobalInvocationId), |
| builder); |
| Instruction* x_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, load_id, 0); |
| Instruction* y_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, load_id, 1); |
| Instruction* z_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, load_id, 2); |
| if (version_ == 1) { |
| // For version 1 format, as a stopgap, pack uvec3 into first word: |
| // x << 21 | y << 10 | z. Second word is unused. (DEPRECATED) |
| Instruction* x_shft_inst = builder->AddBinaryOp( |
| GetUintId(), SpvOpShiftLeftLogical, x_inst->result_id(), |
| builder->GetUintConstantId(21)); |
| Instruction* y_shft_inst = builder->AddBinaryOp( |
| GetUintId(), SpvOpShiftLeftLogical, y_inst->result_id(), |
| builder->GetUintConstantId(10)); |
| Instruction* x_or_y_inst = builder->AddBinaryOp( |
| GetUintId(), SpvOpBitwiseOr, x_shft_inst->result_id(), |
| y_shft_inst->result_id()); |
| Instruction* x_or_y_or_z_inst = |
| builder->AddBinaryOp(GetUintId(), SpvOpBitwiseOr, |
| x_or_y_inst->result_id(), z_inst->result_id()); |
| GenDebugOutputFieldCode(base_offset_id, kInstCompOutGlobalInvocationId, |
| x_or_y_or_z_inst->result_id(), builder); |
| } else { |
| // For version 2 format, write all three words |
| GenDebugOutputFieldCode(base_offset_id, kInstCompOutGlobalInvocationIdX, |
| x_inst->result_id(), builder); |
| GenDebugOutputFieldCode(base_offset_id, kInstCompOutGlobalInvocationIdY, |
| y_inst->result_id(), builder); |
| GenDebugOutputFieldCode(base_offset_id, kInstCompOutGlobalInvocationIdZ, |
| z_inst->result_id(), builder); |
| } |
| } break; |
| case SpvExecutionModelGeometry: { |
| // Load and store PrimitiveId and InvocationId. |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInPrimitiveId), |
| kInstGeomOutPrimitiveId, base_offset_id, builder); |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInInvocationId), |
| kInstGeomOutInvocationId, base_offset_id, builder); |
| } break; |
| case SpvExecutionModelTessellationControl: { |
| // Load and store InvocationId and PrimitiveId |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInInvocationId), |
| kInstTessCtlOutInvocationId, base_offset_id, builder); |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInPrimitiveId), |
| kInstTessCtlOutPrimitiveId, base_offset_id, builder); |
| } break; |
| case SpvExecutionModelTessellationEvaluation: { |
| if (version_ == 1) { |
| // For format version 1, load and store InvocationId. |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInInvocationId), |
| kInstTessOutInvocationId, base_offset_id, builder); |
| } else { |
| // For format version 2, load and store PrimitiveId and TessCoord.uv |
| GenBuiltinOutputCode( |
| context()->GetBuiltinInputVarId(SpvBuiltInPrimitiveId), |
| kInstTessEvalOutPrimitiveId, base_offset_id, builder); |
| uint32_t load_id = GenVarLoad( |
| context()->GetBuiltinInputVarId(SpvBuiltInTessCoord), builder); |
| Instruction* uvec3_cast_inst = |
| builder->AddUnaryOp(GetVec3UintId(), SpvOpBitcast, load_id); |
| uint32_t uvec3_cast_id = uvec3_cast_inst->result_id(); |
| Instruction* u_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, uvec3_cast_id, 0); |
| Instruction* v_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, uvec3_cast_id, 1); |
| GenDebugOutputFieldCode(base_offset_id, kInstTessEvalOutTessCoordU, |
| u_inst->result_id(), builder); |
| GenDebugOutputFieldCode(base_offset_id, kInstTessEvalOutTessCoordV, |
| v_inst->result_id(), builder); |
| } |
| } break; |
| case SpvExecutionModelFragment: { |
| // Load FragCoord and convert to Uint |
| Instruction* frag_coord_inst = builder->AddUnaryOp( |
| GetVec4FloatId(), SpvOpLoad, |
| context()->GetBuiltinInputVarId(SpvBuiltInFragCoord)); |
| Instruction* uint_frag_coord_inst = builder->AddUnaryOp( |
| GetVec4UintId(), SpvOpBitcast, frag_coord_inst->result_id()); |
| for (uint32_t u = 0; u < 2u; ++u) |
| GenFragCoordEltDebugOutputCode( |
| base_offset_id, uint_frag_coord_inst->result_id(), u, builder); |
| } break; |
| case SpvExecutionModelRayGenerationNV: |
| case SpvExecutionModelIntersectionNV: |
| case SpvExecutionModelAnyHitNV: |
| case SpvExecutionModelClosestHitNV: |
| case SpvExecutionModelMissNV: |
| case SpvExecutionModelCallableNV: { |
| // Load and store LaunchIdNV. |
| uint32_t launch_id = GenVarLoad( |
| context()->GetBuiltinInputVarId(SpvBuiltInLaunchIdNV), builder); |
| Instruction* x_launch_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, launch_id, 0); |
| Instruction* y_launch_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, launch_id, 1); |
| Instruction* z_launch_inst = builder->AddIdLiteralOp( |
| GetUintId(), SpvOpCompositeExtract, launch_id, 2); |
| GenDebugOutputFieldCode(base_offset_id, kInstRayTracingOutLaunchIdX, |
| x_launch_inst->result_id(), builder); |
| GenDebugOutputFieldCode(base_offset_id, kInstRayTracingOutLaunchIdY, |
| y_launch_inst->result_id(), builder); |
| GenDebugOutputFieldCode(base_offset_id, kInstRayTracingOutLaunchIdZ, |
| z_launch_inst->result_id(), builder); |
| } break; |
| default: { assert(false && "unsupported stage"); } break; |
| } |
| } |
| |
| void InstrumentPass::GenDebugStreamWrite( |
| uint32_t instruction_idx, uint32_t stage_idx, |
| const std::vector<uint32_t>& validation_ids, InstructionBuilder* builder) { |
| // Call debug output function. Pass func_idx, instruction_idx and |
| // validation ids as args. |
| uint32_t val_id_cnt = static_cast<uint32_t>(validation_ids.size()); |
| uint32_t output_func_id = GetStreamWriteFunctionId(stage_idx, val_id_cnt); |
| std::vector<uint32_t> args = {output_func_id, |
| builder->GetUintConstantId(instruction_idx)}; |
| (void)args.insert(args.end(), validation_ids.begin(), validation_ids.end()); |
| (void)builder->AddNaryOp(GetVoidId(), SpvOpFunctionCall, args); |
| } |
| |
| uint32_t InstrumentPass::GenDebugDirectRead( |
| const std::vector<uint32_t>& offset_ids, InstructionBuilder* builder) { |
| // Call debug input function. Pass func_idx and offset ids as args. |
| uint32_t off_id_cnt = static_cast<uint32_t>(offset_ids.size()); |
| uint32_t input_func_id = GetDirectReadFunctionId(off_id_cnt); |
| std::vector<uint32_t> args = {input_func_id}; |
| (void)args.insert(args.end(), offset_ids.begin(), offset_ids.end()); |
| return builder->AddNaryOp(GetUintId(), SpvOpFunctionCall, args)->result_id(); |
| } |
| |
| bool InstrumentPass::IsSameBlockOp(const Instruction* inst) const { |
| return inst->opcode() == SpvOpSampledImage || inst->opcode() == SpvOpImage; |
| } |
| |
| void InstrumentPass::CloneSameBlockOps( |
| std::unique_ptr<Instruction>* inst, |
| std::unordered_map<uint32_t, uint32_t>* same_blk_post, |
| std::unordered_map<uint32_t, Instruction*>* same_blk_pre, |
| BasicBlock* block_ptr) { |
| (*inst)->ForEachInId( |
| [&same_blk_post, &same_blk_pre, &block_ptr, this](uint32_t* iid) { |
| const auto map_itr = (*same_blk_post).find(*iid); |
| if (map_itr == (*same_blk_post).end()) { |
| const auto map_itr2 = (*same_blk_pre).find(*iid); |
| if (map_itr2 != (*same_blk_pre).end()) { |
| // Clone pre-call same-block ops, map result id. |
| const Instruction* in_inst = map_itr2->second; |
| std::unique_ptr<Instruction> sb_inst(in_inst->Clone(context())); |
| CloneSameBlockOps(&sb_inst, same_blk_post, same_blk_pre, block_ptr); |
| const uint32_t rid = sb_inst->result_id(); |
| const uint32_t nid = this->TakeNextId(); |
| get_decoration_mgr()->CloneDecorations(rid, nid); |
| sb_inst->SetResultId(nid); |
| (*same_blk_post)[rid] = nid; |
| *iid = nid; |
| block_ptr->AddInstruction(std::move(sb_inst)); |
| } |
| } else { |
| // Reset same-block op operand. |
| *iid = map_itr->second; |
| } |
| }); |
| } |
| |
| void InstrumentPass::UpdateSucceedingPhis( |
| std::vector<std::unique_ptr<BasicBlock>>& new_blocks) { |
| const auto first_blk = new_blocks.begin(); |
| const auto last_blk = new_blocks.end() - 1; |
| const uint32_t first_id = (*first_blk)->id(); |
| const uint32_t last_id = (*last_blk)->id(); |
| const BasicBlock& const_last_block = *last_blk->get(); |
| const_last_block.ForEachSuccessorLabel( |
| [&first_id, &last_id, this](const uint32_t succ) { |
| BasicBlock* sbp = this->id2block_[succ]; |
| sbp->ForEachPhiInst([&first_id, &last_id, this](Instruction* phi) { |
| bool changed = false; |
| phi->ForEachInId([&first_id, &last_id, &changed](uint32_t* id) { |
| if (*id == first_id) { |
| *id = last_id; |
| changed = true; |
| } |
| }); |
| if (changed) get_def_use_mgr()->AnalyzeInstUse(phi); |
| }); |
| }); |
| } |
| |
| uint32_t InstrumentPass::GetOutputBufferPtrId() { |
| if (output_buffer_ptr_id_ == 0) { |
| output_buffer_ptr_id_ = context()->get_type_mgr()->FindPointerToType( |
| GetUintId(), SpvStorageClassStorageBuffer); |
| } |
| return output_buffer_ptr_id_; |
| } |
| |
| uint32_t InstrumentPass::GetInputBufferTypeId() { |
| return (validation_id_ == kInstValidationIdBuffAddr) ? GetUint64Id() |
| : GetUintId(); |
| } |
| |
| uint32_t InstrumentPass::GetInputBufferPtrId() { |
| if (input_buffer_ptr_id_ == 0) { |
| input_buffer_ptr_id_ = context()->get_type_mgr()->FindPointerToType( |
| GetInputBufferTypeId(), SpvStorageClassStorageBuffer); |
| } |
| return input_buffer_ptr_id_; |
| } |
| |
| uint32_t InstrumentPass::GetOutputBufferBinding() { |
| switch (validation_id_) { |
| case kInstValidationIdBindless: |
| return kDebugOutputBindingStream; |
| case kInstValidationIdBuffAddr: |
| return kDebugOutputBindingStream; |
| default: |
| assert(false && "unexpected validation id"); |
| } |
| return 0; |
| } |
| |
| uint32_t InstrumentPass::GetInputBufferBinding() { |
| switch (validation_id_) { |
| case kInstValidationIdBindless: |
| return kDebugInputBindingBindless; |
| case kInstValidationIdBuffAddr: |
| return kDebugInputBindingBuffAddr; |
| default: |
| assert(false && "unexpected validation id"); |
| } |
| return 0; |
| } |
| |
| analysis::Type* InstrumentPass::GetUintXRuntimeArrayType( |
| uint32_t width, analysis::Type** rarr_ty) { |
| if (*rarr_ty == nullptr) { |
| analysis::DecorationManager* deco_mgr = get_decoration_mgr(); |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Integer uint_ty(width, false); |
| analysis::Type* reg_uint_ty = type_mgr->GetRegisteredType(&uint_ty); |
| analysis::RuntimeArray uint_rarr_ty_tmp(reg_uint_ty); |
| *rarr_ty = type_mgr->GetRegisteredType(&uint_rarr_ty_tmp); |
| uint32_t uint_arr_ty_id = type_mgr->GetTypeInstruction(*rarr_ty); |
| // By the Vulkan spec, a pre-existing RuntimeArray of uint must be part of |
| // a block, and will therefore be decorated with an ArrayStride. Therefore |
| // the undecorated type returned here will not be pre-existing and can |
| // safely be decorated. Since this type is now decorated, it is out of |
| // sync with the TypeManager and therefore the TypeManager must be |
| // invalidated after this pass. |
| assert(context()->get_def_use_mgr()->NumUses(uint_arr_ty_id) == 0 && |
| "used RuntimeArray type returned"); |
| deco_mgr->AddDecorationVal(uint_arr_ty_id, SpvDecorationArrayStride, |
| width / 8u); |
| } |
| return *rarr_ty; |
| } |
| |
| analysis::Type* InstrumentPass::GetUintRuntimeArrayType(uint32_t width) { |
| analysis::Type** rarr_ty = |
| (width == 64) ? &uint64_rarr_ty_ : &uint32_rarr_ty_; |
| return GetUintXRuntimeArrayType(width, rarr_ty); |
| } |
| |
| void InstrumentPass::AddStorageBufferExt() { |
| if (storage_buffer_ext_defined_) return; |
| if (!get_feature_mgr()->HasExtension(kSPV_KHR_storage_buffer_storage_class)) { |
| context()->AddExtension("SPV_KHR_storage_buffer_storage_class"); |
| } |
| storage_buffer_ext_defined_ = true; |
| } |
| |
| // Return id for output buffer |
| uint32_t InstrumentPass::GetOutputBufferId() { |
| if (output_buffer_id_ == 0) { |
| // If not created yet, create one |
| analysis::DecorationManager* deco_mgr = get_decoration_mgr(); |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Type* reg_uint_rarr_ty = GetUintRuntimeArrayType(32); |
| analysis::Integer uint_ty(32, false); |
| analysis::Type* reg_uint_ty = type_mgr->GetRegisteredType(&uint_ty); |
| analysis::Struct buf_ty({reg_uint_ty, reg_uint_rarr_ty}); |
| analysis::Type* reg_buf_ty = type_mgr->GetRegisteredType(&buf_ty); |
| uint32_t obufTyId = type_mgr->GetTypeInstruction(reg_buf_ty); |
| // By the Vulkan spec, a pre-existing struct containing a RuntimeArray |
| // must be a block, and will therefore be decorated with Block. Therefore |
| // the undecorated type returned here will not be pre-existing and can |
| // safely be decorated. Since this type is now decorated, it is out of |
| // sync with the TypeManager and therefore the TypeManager must be |
| // invalidated after this pass. |
| assert(context()->get_def_use_mgr()->NumUses(obufTyId) == 0 && |
| "used struct type returned"); |
| deco_mgr->AddDecoration(obufTyId, SpvDecorationBlock); |
| deco_mgr->AddMemberDecoration(obufTyId, kDebugOutputSizeOffset, |
| SpvDecorationOffset, 0); |
| deco_mgr->AddMemberDecoration(obufTyId, kDebugOutputDataOffset, |
| SpvDecorationOffset, 4); |
| uint32_t obufTyPtrId_ = |
| type_mgr->FindPointerToType(obufTyId, SpvStorageClassStorageBuffer); |
| output_buffer_id_ = TakeNextId(); |
| std::unique_ptr<Instruction> newVarOp(new Instruction( |
| context(), SpvOpVariable, obufTyPtrId_, output_buffer_id_, |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, |
| {SpvStorageClassStorageBuffer}}})); |
| context()->AddGlobalValue(std::move(newVarOp)); |
| deco_mgr->AddDecorationVal(output_buffer_id_, SpvDecorationDescriptorSet, |
| desc_set_); |
| deco_mgr->AddDecorationVal(output_buffer_id_, SpvDecorationBinding, |
| GetOutputBufferBinding()); |
| AddStorageBufferExt(); |
| if (get_module()->version() >= SPV_SPIRV_VERSION_WORD(1, 4)) { |
| // Add the new buffer to all entry points. |
| for (auto& entry : get_module()->entry_points()) { |
| entry.AddOperand({SPV_OPERAND_TYPE_ID, {output_buffer_id_}}); |
| context()->AnalyzeUses(&entry); |
| } |
| } |
| } |
| return output_buffer_id_; |
| } |
| |
| uint32_t InstrumentPass::GetInputBufferId() { |
| if (input_buffer_id_ == 0) { |
| // If not created yet, create one |
| analysis::DecorationManager* deco_mgr = get_decoration_mgr(); |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| uint32_t width = (validation_id_ == kInstValidationIdBuffAddr) ? 64u : 32u; |
| analysis::Type* reg_uint_rarr_ty = GetUintRuntimeArrayType(width); |
| analysis::Struct buf_ty({reg_uint_rarr_ty}); |
| analysis::Type* reg_buf_ty = type_mgr->GetRegisteredType(&buf_ty); |
| uint32_t ibufTyId = type_mgr->GetTypeInstruction(reg_buf_ty); |
| // By the Vulkan spec, a pre-existing struct containing a RuntimeArray |
| // must be a block, and will therefore be decorated with Block. Therefore |
| // the undecorated type returned here will not be pre-existing and can |
| // safely be decorated. Since this type is now decorated, it is out of |
| // sync with the TypeManager and therefore the TypeManager must be |
| // invalidated after this pass. |
| assert(context()->get_def_use_mgr()->NumUses(ibufTyId) == 0 && |
| "used struct type returned"); |
| deco_mgr->AddDecoration(ibufTyId, SpvDecorationBlock); |
| deco_mgr->AddMemberDecoration(ibufTyId, 0, SpvDecorationOffset, 0); |
| uint32_t ibufTyPtrId_ = |
| type_mgr->FindPointerToType(ibufTyId, SpvStorageClassStorageBuffer); |
| input_buffer_id_ = TakeNextId(); |
| std::unique_ptr<Instruction> newVarOp(new Instruction( |
| context(), SpvOpVariable, ibufTyPtrId_, input_buffer_id_, |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, |
| {SpvStorageClassStorageBuffer}}})); |
| context()->AddGlobalValue(std::move(newVarOp)); |
| deco_mgr->AddDecorationVal(input_buffer_id_, SpvDecorationDescriptorSet, |
| desc_set_); |
| deco_mgr->AddDecorationVal(input_buffer_id_, SpvDecorationBinding, |
| GetInputBufferBinding()); |
| AddStorageBufferExt(); |
| if (get_module()->version() >= SPV_SPIRV_VERSION_WORD(1, 4)) { |
| // Add the new buffer to all entry points. |
| for (auto& entry : get_module()->entry_points()) { |
| entry.AddOperand({SPV_OPERAND_TYPE_ID, {input_buffer_id_}}); |
| context()->AnalyzeUses(&entry); |
| } |
| } |
| } |
| return input_buffer_id_; |
| } |
| |
| uint32_t InstrumentPass::GetVec4FloatId() { |
| if (v4float_id_ == 0) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Float float_ty(32); |
| analysis::Type* reg_float_ty = type_mgr->GetRegisteredType(&float_ty); |
| analysis::Vector v4float_ty(reg_float_ty, 4); |
| analysis::Type* reg_v4float_ty = type_mgr->GetRegisteredType(&v4float_ty); |
| v4float_id_ = type_mgr->GetTypeInstruction(reg_v4float_ty); |
| } |
| return v4float_id_; |
| } |
| |
| uint32_t InstrumentPass::GetUintId() { |
| if (uint_id_ == 0) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Integer uint_ty(32, false); |
| analysis::Type* reg_uint_ty = type_mgr->GetRegisteredType(&uint_ty); |
| uint_id_ = type_mgr->GetTypeInstruction(reg_uint_ty); |
| } |
| return uint_id_; |
| } |
| |
| uint32_t InstrumentPass::GetUint64Id() { |
| if (uint64_id_ == 0) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Integer uint64_ty(64, false); |
| analysis::Type* reg_uint64_ty = type_mgr->GetRegisteredType(&uint64_ty); |
| uint64_id_ = type_mgr->GetTypeInstruction(reg_uint64_ty); |
| } |
| return uint64_id_; |
| } |
| |
| uint32_t InstrumentPass::GetVecUintId(uint32_t len) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Integer uint_ty(32, false); |
| analysis::Type* reg_uint_ty = type_mgr->GetRegisteredType(&uint_ty); |
| analysis::Vector v_uint_ty(reg_uint_ty, len); |
| analysis::Type* reg_v_uint_ty = type_mgr->GetRegisteredType(&v_uint_ty); |
| uint32_t v_uint_id = type_mgr->GetTypeInstruction(reg_v_uint_ty); |
| return v_uint_id; |
| } |
| |
| uint32_t InstrumentPass::GetVec4UintId() { |
| if (v4uint_id_ == 0) v4uint_id_ = GetVecUintId(4u); |
| return v4uint_id_; |
| } |
| |
| uint32_t InstrumentPass::GetVec3UintId() { |
| if (v3uint_id_ == 0) v3uint_id_ = GetVecUintId(3u); |
| return v3uint_id_; |
| } |
| |
| uint32_t InstrumentPass::GetBoolId() { |
| if (bool_id_ == 0) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Bool bool_ty; |
| analysis::Type* reg_bool_ty = type_mgr->GetRegisteredType(&bool_ty); |
| bool_id_ = type_mgr->GetTypeInstruction(reg_bool_ty); |
| } |
| return bool_id_; |
| } |
| |
| uint32_t InstrumentPass::GetVoidId() { |
| if (void_id_ == 0) { |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| analysis::Void void_ty; |
| analysis::Type* reg_void_ty = type_mgr->GetRegisteredType(&void_ty); |
| void_id_ = type_mgr->GetTypeInstruction(reg_void_ty); |
| } |
| return void_id_; |
| } |
| |
| uint32_t InstrumentPass::GetStreamWriteFunctionId(uint32_t stage_idx, |
| uint32_t val_spec_param_cnt) { |
| // Total param count is common params plus validation-specific |
| // params |
| uint32_t param_cnt = kInstCommonParamCnt + val_spec_param_cnt; |
| if (output_func_id_ == 0) { |
| // Create function |
| output_func_id_ = TakeNextId(); |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| std::vector<const analysis::Type*> param_types; |
| for (uint32_t c = 0; c < param_cnt; ++c) |
| param_types.push_back(type_mgr->GetType(GetUintId())); |
| analysis::Function func_ty(type_mgr->GetType(GetVoidId()), param_types); |
| analysis::Type* reg_func_ty = type_mgr->GetRegisteredType(&func_ty); |
| std::unique_ptr<Instruction> func_inst(new Instruction( |
| get_module()->context(), SpvOpFunction, GetVoidId(), output_func_id_, |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, |
| {SpvFunctionControlMaskNone}}, |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, |
| {type_mgr->GetTypeInstruction(reg_func_ty)}}})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*func_inst); |
| std::unique_ptr<Function> output_func = |
| MakeUnique<Function>(std::move(func_inst)); |
| // Add parameters |
| std::vector<uint32_t> param_vec; |
| for (uint32_t c = 0; c < param_cnt; ++c) { |
| uint32_t pid = TakeNextId(); |
| param_vec.push_back(pid); |
| std::unique_ptr<Instruction> param_inst( |
| new Instruction(get_module()->context(), SpvOpFunctionParameter, |
| GetUintId(), pid, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*param_inst); |
| output_func->AddParameter(std::move(param_inst)); |
| } |
| // Create first block |
| uint32_t test_blk_id = TakeNextId(); |
| std::unique_ptr<Instruction> test_label(NewLabel(test_blk_id)); |
| std::unique_ptr<BasicBlock> new_blk_ptr = |
| MakeUnique<BasicBlock>(std::move(test_label)); |
| InstructionBuilder builder( |
| context(), &*new_blk_ptr, |
| IRContext::kAnalysisDefUse | IRContext::kAnalysisInstrToBlockMapping); |
| // Gen test if debug output buffer size will not be exceeded. |
| uint32_t val_spec_offset = |
| (version_ == 1) ? kInstStageOutCnt : kInst2StageOutCnt; |
| uint32_t obuf_record_sz = val_spec_offset + val_spec_param_cnt; |
| uint32_t buf_id = GetOutputBufferId(); |
| uint32_t buf_uint_ptr_id = GetOutputBufferPtrId(); |
| Instruction* obuf_curr_sz_ac_inst = |
| builder.AddBinaryOp(buf_uint_ptr_id, SpvOpAccessChain, buf_id, |
| builder.GetUintConstantId(kDebugOutputSizeOffset)); |
| // Fetch the current debug buffer written size atomically, adding the |
| // size of the record to be written. |
| uint32_t obuf_record_sz_id = builder.GetUintConstantId(obuf_record_sz); |
| uint32_t mask_none_id = builder.GetUintConstantId(SpvMemoryAccessMaskNone); |
| uint32_t scope_invok_id = builder.GetUintConstantId(SpvScopeInvocation); |
| Instruction* obuf_curr_sz_inst = builder.AddQuadOp( |
| GetUintId(), SpvOpAtomicIAdd, obuf_curr_sz_ac_inst->result_id(), |
| scope_invok_id, mask_none_id, obuf_record_sz_id); |
| uint32_t obuf_curr_sz_id = obuf_curr_sz_inst->result_id(); |
| // Compute new written size |
| Instruction* obuf_new_sz_inst = |
| builder.AddBinaryOp(GetUintId(), SpvOpIAdd, obuf_curr_sz_id, |
| builder.GetUintConstantId(obuf_record_sz)); |
| // Fetch the data bound |
| Instruction* obuf_bnd_inst = |
| builder.AddIdLiteralOp(GetUintId(), SpvOpArrayLength, |
| GetOutputBufferId(), kDebugOutputDataOffset); |
| // Test that new written size is less than or equal to debug output |
| // data bound |
| Instruction* obuf_safe_inst = builder.AddBinaryOp( |
| GetBoolId(), SpvOpULessThanEqual, obuf_new_sz_inst->result_id(), |
| obuf_bnd_inst->result_id()); |
| uint32_t merge_blk_id = TakeNextId(); |
| uint32_t write_blk_id = TakeNextId(); |
| std::unique_ptr<Instruction> merge_label(NewLabel(merge_blk_id)); |
| std::unique_ptr<Instruction> write_label(NewLabel(write_blk_id)); |
| (void)builder.AddConditionalBranch(obuf_safe_inst->result_id(), |
| write_blk_id, merge_blk_id, merge_blk_id, |
| SpvSelectionControlMaskNone); |
| // Close safety test block and gen write block |
| new_blk_ptr->SetParent(&*output_func); |
| output_func->AddBasicBlock(std::move(new_blk_ptr)); |
| new_blk_ptr = MakeUnique<BasicBlock>(std::move(write_label)); |
| builder.SetInsertPoint(&*new_blk_ptr); |
| // Generate common and stage-specific debug record members |
| GenCommonStreamWriteCode(obuf_record_sz, param_vec[kInstCommonParamInstIdx], |
| stage_idx, obuf_curr_sz_id, &builder); |
| GenStageStreamWriteCode(stage_idx, obuf_curr_sz_id, &builder); |
| // Gen writes of validation specific data |
| for (uint32_t i = 0; i < val_spec_param_cnt; ++i) { |
| GenDebugOutputFieldCode(obuf_curr_sz_id, val_spec_offset + i, |
| param_vec[kInstCommonParamCnt + i], &builder); |
| } |
| // Close write block and gen merge block |
| (void)builder.AddBranch(merge_blk_id); |
| new_blk_ptr->SetParent(&*output_func); |
| output_func->AddBasicBlock(std::move(new_blk_ptr)); |
| new_blk_ptr = MakeUnique<BasicBlock>(std::move(merge_label)); |
| builder.SetInsertPoint(&*new_blk_ptr); |
| // Close merge block and function and add function to module |
| (void)builder.AddNullaryOp(0, SpvOpReturn); |
| new_blk_ptr->SetParent(&*output_func); |
| output_func->AddBasicBlock(std::move(new_blk_ptr)); |
| std::unique_ptr<Instruction> func_end_inst( |
| new Instruction(get_module()->context(), SpvOpFunctionEnd, 0, 0, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*func_end_inst); |
| output_func->SetFunctionEnd(std::move(func_end_inst)); |
| context()->AddFunction(std::move(output_func)); |
| output_func_param_cnt_ = param_cnt; |
| } |
| assert(param_cnt == output_func_param_cnt_ && "bad arg count"); |
| return output_func_id_; |
| } |
| |
| uint32_t InstrumentPass::GetDirectReadFunctionId(uint32_t param_cnt) { |
| uint32_t func_id = param2input_func_id_[param_cnt]; |
| if (func_id != 0) return func_id; |
| // Create input function for param_cnt. |
| func_id = TakeNextId(); |
| analysis::TypeManager* type_mgr = context()->get_type_mgr(); |
| std::vector<const analysis::Type*> param_types; |
| for (uint32_t c = 0; c < param_cnt; ++c) |
| param_types.push_back(type_mgr->GetType(GetUintId())); |
| uint32_t ibuf_type_id = GetInputBufferTypeId(); |
| analysis::Function func_ty(type_mgr->GetType(ibuf_type_id), param_types); |
| analysis::Type* reg_func_ty = type_mgr->GetRegisteredType(&func_ty); |
| std::unique_ptr<Instruction> func_inst(new Instruction( |
| get_module()->context(), SpvOpFunction, ibuf_type_id, func_id, |
| {{spv_operand_type_t::SPV_OPERAND_TYPE_LITERAL_INTEGER, |
| {SpvFunctionControlMaskNone}}, |
| {spv_operand_type_t::SPV_OPERAND_TYPE_ID, |
| {type_mgr->GetTypeInstruction(reg_func_ty)}}})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*func_inst); |
| std::unique_ptr<Function> input_func = |
| MakeUnique<Function>(std::move(func_inst)); |
| // Add parameters |
| std::vector<uint32_t> param_vec; |
| for (uint32_t c = 0; c < param_cnt; ++c) { |
| uint32_t pid = TakeNextId(); |
| param_vec.push_back(pid); |
| std::unique_ptr<Instruction> param_inst(new Instruction( |
| get_module()->context(), SpvOpFunctionParameter, GetUintId(), pid, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*param_inst); |
| input_func->AddParameter(std::move(param_inst)); |
| } |
| // Create block |
| uint32_t blk_id = TakeNextId(); |
| std::unique_ptr<Instruction> blk_label(NewLabel(blk_id)); |
| std::unique_ptr<BasicBlock> new_blk_ptr = |
| MakeUnique<BasicBlock>(std::move(blk_label)); |
| InstructionBuilder builder( |
| context(), &*new_blk_ptr, |
| IRContext::kAnalysisDefUse | IRContext::kAnalysisInstrToBlockMapping); |
| // For each offset parameter, generate new offset with parameter, adding last |
| // loaded value if it exists, and load value from input buffer at new offset. |
| // Return last loaded value. |
| uint32_t buf_id = GetInputBufferId(); |
| uint32_t buf_ptr_id = GetInputBufferPtrId(); |
| uint32_t last_value_id = 0; |
| for (uint32_t p = 0; p < param_cnt; ++p) { |
| uint32_t offset_id; |
| if (p == 0) { |
| offset_id = param_vec[0]; |
| } else { |
| if (ibuf_type_id != GetUintId()) { |
| Instruction* ucvt_inst = |
| builder.AddUnaryOp(GetUintId(), SpvOpUConvert, last_value_id); |
| last_value_id = ucvt_inst->result_id(); |
| } |
| Instruction* offset_inst = builder.AddBinaryOp( |
| GetUintId(), SpvOpIAdd, last_value_id, param_vec[p]); |
| offset_id = offset_inst->result_id(); |
| } |
| Instruction* ac_inst = builder.AddTernaryOp( |
| buf_ptr_id, SpvOpAccessChain, buf_id, |
| builder.GetUintConstantId(kDebugInputDataOffset), offset_id); |
| Instruction* load_inst = |
| builder.AddUnaryOp(ibuf_type_id, SpvOpLoad, ac_inst->result_id()); |
| last_value_id = load_inst->result_id(); |
| } |
| (void)builder.AddInstruction(MakeUnique<Instruction>( |
| context(), SpvOpReturnValue, 0, 0, |
| std::initializer_list<Operand>{{SPV_OPERAND_TYPE_ID, {last_value_id}}})); |
| // Close block and function and add function to module |
| new_blk_ptr->SetParent(&*input_func); |
| input_func->AddBasicBlock(std::move(new_blk_ptr)); |
| std::unique_ptr<Instruction> func_end_inst( |
| new Instruction(get_module()->context(), SpvOpFunctionEnd, 0, 0, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*func_end_inst); |
| input_func->SetFunctionEnd(std::move(func_end_inst)); |
| context()->AddFunction(std::move(input_func)); |
| param2input_func_id_[param_cnt] = func_id; |
| return func_id; |
| } |
| |
| bool InstrumentPass::InstrumentFunction(Function* func, uint32_t stage_idx, |
| InstProcessFunction& pfn) { |
| bool modified = false; |
| // Compute function index |
| uint32_t function_idx = 0; |
| for (auto fii = get_module()->begin(); fii != get_module()->end(); ++fii) { |
| if (&*fii == func) break; |
| ++function_idx; |
| } |
| std::vector<std::unique_ptr<BasicBlock>> new_blks; |
| // Using block iterators here because of block erasures and insertions. |
| for (auto bi = func->begin(); bi != func->end(); ++bi) { |
| for (auto ii = bi->begin(); ii != bi->end();) { |
| // Generate instrumentation if warranted |
| pfn(ii, bi, stage_idx, &new_blks); |
| if (new_blks.size() == 0) { |
| ++ii; |
| continue; |
| } |
| // Add new blocks to label id map |
| for (auto& blk : new_blks) id2block_[blk->id()] = &*blk; |
| // If there are new blocks we know there will always be two or |
| // more, so update succeeding phis with label of new last block. |
| size_t newBlocksSize = new_blks.size(); |
| assert(newBlocksSize > 1); |
| UpdateSucceedingPhis(new_blks); |
| // Replace original block with new block(s) |
| bi = bi.Erase(); |
| for (auto& bb : new_blks) { |
| bb->SetParent(func); |
| } |
| bi = bi.InsertBefore(&new_blks); |
| // Reset block iterator to last new block |
| for (size_t i = 0; i < newBlocksSize - 1; i++) ++bi; |
| modified = true; |
| // Restart instrumenting at beginning of last new block, |
| // but skip over any new phi or copy instruction. |
| ii = bi->begin(); |
| if (ii->opcode() == SpvOpPhi || ii->opcode() == SpvOpCopyObject) ++ii; |
| new_blks.clear(); |
| } |
| } |
| return modified; |
| } |
| |
| bool InstrumentPass::InstProcessCallTreeFromRoots(InstProcessFunction& pfn, |
| std::queue<uint32_t>* roots, |
| uint32_t stage_idx) { |
| bool modified = false; |
| std::unordered_set<uint32_t> done; |
| // Don't process input and output functions |
| for (auto& ifn : param2input_func_id_) done.insert(ifn.second); |
| if (output_func_id_ != 0) done.insert(output_func_id_); |
| // Process all functions from roots |
| while (!roots->empty()) { |
| const uint32_t fi = roots->front(); |
| roots->pop(); |
| if (done.insert(fi).second) { |
| Function* fn = id2function_.at(fi); |
| // Add calls first so we don't add new output function |
| context()->AddCalls(fn, roots); |
| modified = InstrumentFunction(fn, stage_idx, pfn) || modified; |
| } |
| } |
| return modified; |
| } |
| |
| bool InstrumentPass::InstProcessEntryPointCallTree(InstProcessFunction& pfn) { |
| // Make sure all entry points have the same execution model. Do not |
| // instrument if they do not. |
| // TODO(greg-lunarg): Handle mixed stages. Technically, a shader module |
| // can contain entry points with different execution models, although |
| // such modules will likely be rare as GLSL and HLSL are geared toward |
| // one model per module. In such cases we will need |
| // to clone any functions which are in the call trees of entrypoints |
| // with differing execution models. |
| uint32_t ecnt = 0; |
| uint32_t stage = SpvExecutionModelMax; |
| for (auto& e : get_module()->entry_points()) { |
| if (ecnt == 0) |
| stage = e.GetSingleWordInOperand(kEntryPointExecutionModelInIdx); |
| else if (e.GetSingleWordInOperand(kEntryPointExecutionModelInIdx) != stage) |
| return false; |
| ++ecnt; |
| } |
| // Only supporting vertex, fragment and compute shaders at the moment. |
| // TODO(greg-lunarg): Handle all stages. |
| if (stage != SpvExecutionModelVertex && stage != SpvExecutionModelFragment && |
| stage != SpvExecutionModelGeometry && |
| stage != SpvExecutionModelGLCompute && |
| stage != SpvExecutionModelTessellationControl && |
| stage != SpvExecutionModelTessellationEvaluation && |
| stage != SpvExecutionModelRayGenerationNV && |
| stage != SpvExecutionModelIntersectionNV && |
| stage != SpvExecutionModelAnyHitNV && |
| stage != SpvExecutionModelClosestHitNV && |
| stage != SpvExecutionModelMissNV && stage != SpvExecutionModelCallableNV) |
| return false; |
| // Add together the roots of all entry points |
| std::queue<uint32_t> roots; |
| for (auto& e : get_module()->entry_points()) { |
| roots.push(e.GetSingleWordInOperand(kEntryPointFunctionIdInIdx)); |
| } |
| bool modified = InstProcessCallTreeFromRoots(pfn, &roots, stage); |
| return modified; |
| } |
| |
| void InstrumentPass::InitializeInstrument() { |
| output_buffer_id_ = 0; |
| output_buffer_ptr_id_ = 0; |
| input_buffer_ptr_id_ = 0; |
| output_func_id_ = 0; |
| output_func_param_cnt_ = 0; |
| input_buffer_id_ = 0; |
| v4float_id_ = 0; |
| uint_id_ = 0; |
| uint64_id_ = 0; |
| v4uint_id_ = 0; |
| v3uint_id_ = 0; |
| bool_id_ = 0; |
| void_id_ = 0; |
| storage_buffer_ext_defined_ = false; |
| uint32_rarr_ty_ = nullptr; |
| uint64_rarr_ty_ = nullptr; |
| |
| // clear collections |
| id2function_.clear(); |
| id2block_.clear(); |
| |
| // Initialize function and block maps. |
| for (auto& fn : *get_module()) { |
| id2function_[fn.result_id()] = &fn; |
| for (auto& blk : fn) { |
| id2block_[blk.id()] = &blk; |
| } |
| } |
| |
| // Remember original instruction offsets |
| uint32_t module_offset = 0; |
| Module* module = get_module(); |
| for (auto& i : context()->capabilities()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->extensions()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->ext_inst_imports()) { |
| (void)i; |
| ++module_offset; |
| } |
| ++module_offset; // memory_model |
| for (auto& i : module->entry_points()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->execution_modes()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->debugs1()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->debugs2()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->debugs3()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->annotations()) { |
| (void)i; |
| ++module_offset; |
| } |
| for (auto& i : module->types_values()) { |
| module_offset += 1; |
| module_offset += static_cast<uint32_t>(i.dbg_line_insts().size()); |
| } |
| |
| auto curr_fn = get_module()->begin(); |
| for (; curr_fn != get_module()->end(); ++curr_fn) { |
| // Count function instruction |
| module_offset += 1; |
| curr_fn->ForEachParam( |
| [&module_offset](const Instruction*) { module_offset += 1; }, true); |
| for (auto& blk : *curr_fn) { |
| // Count label |
| module_offset += 1; |
| for (auto& inst : blk) { |
| module_offset += static_cast<uint32_t>(inst.dbg_line_insts().size()); |
| uid2offset_[inst.unique_id()] = module_offset; |
| module_offset += 1; |
| } |
| } |
| // Count function end instruction |
| module_offset += 1; |
| } |
| } |
| |
| } // namespace opt |
| } // namespace spvtools |
