third_party/LLVM/test/Transforms/IndVarSimplify/no-iv-rewrite.ll - SwiftShader - Git at Google

 ; RUN: opt < %s -indvars -enable-iv-rewrite=false -S | FileCheck %s
 ;
 ; Make sure that indvars isn't inserting canonical IVs.
 ; This is kinda hard to do until linear function test replacement is removed.

 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64"

 define i32 @sum(i32* %arr, i32 %n) nounwind {
 entry:
   %precond = icmp slt i32 0, %n
   br i1 %precond, label %ph, label %return

 ph:
   br label %loop

 ; CHECK: loop:
 ;
 ; We should only have 2 IVs.
 ; CHECK: phi
 ; CHECK: phi
 ; CHECK-NOT: phi
 ;
 ; sext should be eliminated while preserving gep inboundsness.
 ; CHECK-NOT: sext
 ; CHECK: getelementptr inbounds
 ; CHECK: exit:
 loop:
   %i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
   %s.01 = phi i32 [ 0, %ph ], [ %sinc, %loop ]
   %ofs = sext i32 %i.02 to i64
   %adr = getelementptr inbounds i32* %arr, i64 %ofs
   %val = load i32* %adr
   %sinc = add nsw i32 %s.01, %val
   %iinc = add nsw i32 %i.02, 1
   %cond = icmp slt i32 %iinc, %n
   br i1 %cond, label %loop, label %exit

 exit:
   %s.lcssa = phi i32 [ %sinc, %loop ]
   br label %return

 return:
   %s.0.lcssa = phi i32 [ %s.lcssa, %exit ], [ 0, %entry ]
   ret i32 %s.0.lcssa
 }

 define i64 @suml(i32* %arr, i32 %n) nounwind {
 entry:
   %precond = icmp slt i32 0, %n
   br i1 %precond, label %ph, label %return

 ph:
   br label %loop

 ; CHECK: loop:
 ;
 ; We should only have 2 IVs.
 ; CHECK: phi
 ; CHECK: phi
 ; CHECK-NOT: phi
 ;
 ; %ofs sext should be eliminated while preserving gep inboundsness.
 ; CHECK-NOT: sext
 ; CHECK: getelementptr inbounds
 ; %vall sext should obviously not be eliminated
 ; CHECK: sext
 ; CHECK: exit:
 loop:
   %i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
   %s.01 = phi i64 [ 0, %ph ], [ %sinc, %loop ]
   %ofs = sext i32 %i.02 to i64
   %adr = getelementptr inbounds i32* %arr, i64 %ofs
   %val = load i32* %adr
   %vall = sext i32 %val to i64
   %sinc = add nsw i64 %s.01, %vall
   %iinc = add nsw i32 %i.02, 1
   %cond = icmp slt i32 %iinc, %n
   br i1 %cond, label %loop, label %exit

 exit:
   %s.lcssa = phi i64 [ %sinc, %loop ]
   br label %return

 return:
   %s.0.lcssa = phi i64 [ %s.lcssa, %exit ], [ 0, %entry ]
   ret i64 %s.0.lcssa
 }

 define void @outofbounds(i32* %first, i32* %last, i32 %idx) nounwind {
   %precond = icmp ne i32* %first, %last
   br i1 %precond, label %ph, label %return

 ; CHECK: ph:
 ; It's not indvars' job to perform LICM on %ofs
 ; CHECK-NOT: sext
 ph:
   br label %loop

 ; CHECK: loop:
 ;
 ; Preserve exactly one pointer type IV.
 ; CHECK: phi i32*
 ; CHECK-NOT: phi
 ;
 ; Don't create any extra adds.
 ; CHECK-NOT: add
 ;
 ; Preserve gep inboundsness, and don't factor it.
 ; CHECK: getelementptr inbounds i32* %ptriv, i32 1
 ; CHECK-NOT: add
 ; CHECK: exit:
 loop:
   %ptriv = phi i32* [ %first, %ph ], [ %ptrpost, %loop ]
   %ofs = sext i32 %idx to i64
   %adr = getelementptr inbounds i32* %ptriv, i64 %ofs
   store i32 3, i32* %adr
   %ptrpost = getelementptr inbounds i32* %ptriv, i32 1
   %cond = icmp ne i32* %ptrpost, %last
   br i1 %cond, label %loop, label %exit

 exit:
   br label %return

 return:
   ret void
 }

 %structI = type { i32 }

 define void @bitcastiv(i32 %start, i32 %limit, i32 %step, %structI* %base)
 nounwind
 {
 entry:
   br label %loop

 ; CHECK: loop:
 ;
 ; Preserve casts
 ; CHECK: phi i32
 ; CHECK: bitcast
 ; CHECK: getelementptr
 ; CHECK: exit:
 loop:
   %iv = phi i32 [%start, %entry], [%next, %loop]
   %p = phi %structI* [%base, %entry], [%pinc, %loop]
   %adr = getelementptr %structI* %p, i32 0, i32 0
   store i32 3, i32* %adr
   %pp = bitcast %structI* %p to i32*
   store i32 4, i32* %pp
   %pinc = getelementptr %structI* %p, i32 1
   %next = add i32 %iv, 1
   %cond = icmp ne i32 %next, %limit
   br i1 %cond, label %loop, label %exit

 exit:
   ret void
 }

 define void @maxvisitor(i32 %limit, i32* %base) nounwind {
 entry:
  br label %loop

 ; Test inserting a truncate at a phi use.
 ;
 ; CHECK: loop:
 ; CHECK: phi i64
 ; CHECK: trunc
 ; CHECK: exit:
 loop:
   %idx = phi i32 [ 0, %entry ], [ %idx.next, %loop.inc ]
   %max = phi i32 [ 0, %entry ], [ %max.next, %loop.inc ]
   %idxprom = sext i32 %idx to i64
   %adr = getelementptr inbounds i32* %base, i64 %idxprom
   %val = load i32* %adr
   %cmp19 = icmp sgt i32 %val, %max
   br i1 %cmp19, label %if.then, label %if.else

 if.then:
   br label %loop.inc

 if.else:
   br label %loop.inc

 loop.inc:
   %max.next = phi i32 [ %idx, %if.then ], [ %max, %if.else ]
   %idx.next = add nsw i32 %idx, 1
   %cmp = icmp slt i32 %idx.next, %limit
   br i1 %cmp, label %loop, label %exit

 exit:
   ret void
 }

 define void @identityphi(i32 %limit) nounwind {
 entry:
   br label %loop

 ; Test an edge case of removing an identity phi that directly feeds
 ; back to the loop iv.
 ;
 ; CHECK: loop:
 ; CHECK: phi i32
 ; CHECK-NOT: phi
 ; CHECK: exit:
 loop:
   %iv = phi i32 [ 0, %entry], [ %iv.next, %control ]
   br i1 undef, label %if.then, label %control

 if.then:
   br label %control

 control:
   %iv.next = phi i32 [ %iv, %loop ], [ undef, %if.then ]
   %cmp = icmp slt i32 %iv.next, %limit
   br i1 %cmp, label %loop, label %exit

 exit:
   ret void
 }

 define i64 @cloneOr(i32 %limit, i64* %base) nounwind {
 entry:
   ; ensure that the loop can't overflow
   %halfLim = ashr i32 %limit, 2
   br label %loop

 ; Test cloning an or, which is not an OverflowBinaryOperator.
 ;
 ; CHECK: loop:
 ; CHECK: phi i64
 ; CHECK-NOT: sext
 ; CHECK: or i64
 ; CHECK: exit:
 loop:
   %iv = phi i32 [ 0, %entry], [ %iv.next, %loop ]
   %t1 = sext i32 %iv to i64
   %adr = getelementptr i64* %base, i64 %t1
   %val = load i64* %adr
   %t2 = or i32 %iv, 1
   %t3 = sext i32 %t2 to i64
   %iv.next = add i32 %iv, 2
   %cmp = icmp slt i32 %iv.next, %halfLim
   br i1 %cmp, label %loop, label %exit

 exit:
   %result = and i64 %val, %t3
   ret i64 %result
 }

 ; The i induction variable looks like a wrap-around, but it really is just
 ; a simple affine IV.  Make sure that indvars simplifies through.
 define i32 @indirectRecurrence() nounwind {
 entry:
   br label %loop

 ; ReplaceLoopExitValue should fold the return value to constant 9.
 ; CHECK: loop:
 ; CHECK: phi i32
 ; CHECK: ret i32 9
 loop:
   %j.0 = phi i32 [ 1, %entry ], [ %j.next, %cond_true ]
   %i.0 = phi i32 [ 0, %entry ], [ %j.0, %cond_true ]
   %tmp = icmp ne i32 %j.0, 10
   br i1 %tmp, label %cond_true, label %return

 cond_true:
   %j.next = add i32 %j.0, 1
   br label %loop

 return:
   ret i32 %i.0
 }

 ; Eliminate the congruent phis j, k, and l.
 ; Eliminate the redundant IV increments k.next and l.next.
 ; Two phis should remain, one starting at %init, and one at %init1.
 ; Two increments should remain, one by %step and one by %step1.
 ; CHECK: loop:
 ; CHECK: phi i32
 ; CHECK: phi i32
 ; CHECK-NOT: phi
 ; CHECK: add i32
 ; CHECK: add i32
 ; CHECK: add i32
 ; CHECK-NOT: add
 ; CHECK: return:
 ;
 ; Five live-outs should remain.
 ; CHECK: lcssa = phi
 ; CHECK: lcssa = phi
 ; CHECK: lcssa = phi
 ; CHECK: lcssa = phi
 ; CHECK: lcssa = phi
 ; CHECK-NOT: phi
 ; CHECK: ret
 define i32 @isomorphic(i32 %init, i32 %step, i32 %lim) nounwind {
 entry:
   %step1 = add i32 %step, 1
   %init1 = add i32 %init, %step1
   %l.0 = sub i32 %init1, %step1
   br label %loop

 loop:
   %ii = phi i32 [ %init1, %entry ], [ %ii.next, %loop ]
   %i = phi i32 [ %init, %entry ], [ %ii, %loop ]
   %j = phi i32 [ %init, %entry ], [ %j.next, %loop ]
   %k = phi i32 [ %init1, %entry ], [ %k.next, %loop ]
   %l = phi i32 [ %l.0, %entry ], [ %l.next, %loop ]
   %ii.next = add i32 %ii, %step1
   %j.next = add i32 %j, %step1
   %k.next = add i32 %k, %step1
   %l.step = add i32 %l, %step
   %l.next = add i32 %l.step, 1
   %cmp = icmp ne i32 %ii.next, %lim
   br i1 %cmp, label %loop, label %return

 return:
   %sum1 = add i32 %i, %j.next
   %sum2 = add i32 %sum1, %k.next
   %sum3 = add i32 %sum1, %l.step
   %sum4 = add i32 %sum1, %l.next
   ret i32 %sum4
 }

 ; Test a GEP IV that is derived from another GEP IV by a nop gep that
 ; lowers the type without changing the expression.
 %structIF = type { i32, float }

 define void @congruentgepiv(%structIF* %base) nounwind uwtable ssp {
 entry:
   %first = getelementptr inbounds %structIF* %base, i64 0, i32 0
   br label %loop

 ; CHECK: loop:
 ; CHECK: phi %structIF*
 ; CHECK: phi i32*
 ; CHECK: getelementptr inbounds
 ; CHECK: getelementptr inbounds
 ; CHECK: exit:
 loop:
   %ptr.iv = phi %structIF* [ %ptr.inc, %latch ], [ %base, %entry ]
   %next = phi i32* [ %next.inc, %latch ], [ %first, %entry ]
   store i32 4, i32* %next
   br i1 undef, label %latch, label %exit

 latch:                         ; preds = %for.inc50.i
   %ptr.inc = getelementptr inbounds %structIF* %ptr.iv, i64 1
   %next.inc = getelementptr inbounds %structIF* %ptr.inc, i64 0, i32 0
   br label %loop

 exit:
   ret void
 }

 ; Test a widened IV that is used by a phi on different paths within the loop.
 ;
 ; CHECK: for.body:
 ; CHECK: phi i64
 ; CHECK: trunc i64
 ; CHECK: if.then:
 ; CHECK: for.inc:
 ; CHECK: phi i32
 ; CHECK: for.end:
 define void @phiUsesTrunc() nounwind {
 entry:
   br i1 undef, label %for.body, label %for.end

 for.body:
   %iv = phi i32 [ %inc, %for.inc ], [ 1, %entry ]
   br i1 undef, label %if.then, label %if.else

 if.then:
   br i1 undef, label %if.then33, label %for.inc

 if.then33:
   br label %for.inc

 if.else:
   br i1 undef, label %if.then97, label %for.inc

 if.then97:
   %idxprom100 = sext i32 %iv to i64
   br label %for.inc

 for.inc:
   %kmin.1 = phi i32 [ %iv, %if.then33 ], [ 0, %if.then ], [ %iv, %if.then97 ], [ 0, %if.else ]
   %inc = add nsw i32 %iv, 1
   br i1 undef, label %for.body, label %for.end

 for.end:
   ret void
 }
	; RUN: opt < %s -indvars -enable-iv-rewrite=false -S \| FileCheck %s
	;
	; Make sure that indvars isn't inserting canonical IVs.
	; This is kinda hard to do until linear function test replacement is removed.

	target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64"

	define i32 @sum(i32* %arr, i32 %n) nounwind {
	entry:
	%precond = icmp slt i32 0, %n
	br i1 %precond, label %ph, label %return

	ph:
	br label %loop

	; CHECK: loop:
	;
	; We should only have 2 IVs.
	; CHECK: phi
	; CHECK: phi
	; CHECK-NOT: phi
	;
	; sext should be eliminated while preserving gep inboundsness.
	; CHECK-NOT: sext
	; CHECK: getelementptr inbounds
	; CHECK: exit:
	loop:
	%i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
	%s.01 = phi i32 [ 0, %ph ], [ %sinc, %loop ]
	%ofs = sext i32 %i.02 to i64
	%adr = getelementptr inbounds i32* %arr, i64 %ofs
	%val = load i32* %adr
	%sinc = add nsw i32 %s.01, %val
	%iinc = add nsw i32 %i.02, 1
	%cond = icmp slt i32 %iinc, %n
	br i1 %cond, label %loop, label %exit

	exit:
	%s.lcssa = phi i32 [ %sinc, %loop ]
	br label %return

	return:
	%s.0.lcssa = phi i32 [ %s.lcssa, %exit ], [ 0, %entry ]
	ret i32 %s.0.lcssa
	}

	define i64 @suml(i32* %arr, i32 %n) nounwind {
	entry:
	%precond = icmp slt i32 0, %n
	br i1 %precond, label %ph, label %return

	ph:
	br label %loop

	; CHECK: loop:
	;
	; We should only have 2 IVs.
	; CHECK: phi
	; CHECK: phi
	; CHECK-NOT: phi
	;
	; %ofs sext should be eliminated while preserving gep inboundsness.
	; CHECK-NOT: sext
	; CHECK: getelementptr inbounds
	; %vall sext should obviously not be eliminated
	; CHECK: sext
	; CHECK: exit:
	loop:
	%i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
	%s.01 = phi i64 [ 0, %ph ], [ %sinc, %loop ]
	%ofs = sext i32 %i.02 to i64
	%adr = getelementptr inbounds i32* %arr, i64 %ofs
	%val = load i32* %adr
	%vall = sext i32 %val to i64
	%sinc = add nsw i64 %s.01, %vall
	%iinc = add nsw i32 %i.02, 1
	%cond = icmp slt i32 %iinc, %n
	br i1 %cond, label %loop, label %exit

	exit:
	%s.lcssa = phi i64 [ %sinc, %loop ]
	br label %return

	return:
	%s.0.lcssa = phi i64 [ %s.lcssa, %exit ], [ 0, %entry ]
	ret i64 %s.0.lcssa
	}

	define void @outofbounds(i32* %first, i32* %last, i32 %idx) nounwind {
	%precond = icmp ne i32* %first, %last
	br i1 %precond, label %ph, label %return

	; CHECK: ph:
	; It's not indvars' job to perform LICM on %ofs
	; CHECK-NOT: sext
	ph:
	br label %loop

	; CHECK: loop:
	;
	; Preserve exactly one pointer type IV.
	; CHECK: phi i32*
	; CHECK-NOT: phi
	;
	; Don't create any extra adds.
	; CHECK-NOT: add
	;
	; Preserve gep inboundsness, and don't factor it.
	; CHECK: getelementptr inbounds i32* %ptriv, i32 1
	; CHECK-NOT: add
	; CHECK: exit:
	loop:
	%ptriv = phi i32* [ %first, %ph ], [ %ptrpost, %loop ]
	%ofs = sext i32 %idx to i64
	%adr = getelementptr inbounds i32* %ptriv, i64 %ofs
	store i32 3, i32* %adr
	%ptrpost = getelementptr inbounds i32* %ptriv, i32 1
	%cond = icmp ne i32* %ptrpost, %last
	br i1 %cond, label %loop, label %exit

	exit:
	br label %return

	return:
	ret void
	}

	%structI = type { i32 }

	define void @bitcastiv(i32 %start, i32 %limit, i32 %step, %structI* %base)
	nounwind
	{
	entry:
	br label %loop

	; CHECK: loop:
	;
	; Preserve casts
	; CHECK: phi i32
	; CHECK: bitcast
	; CHECK: getelementptr
	; CHECK: exit:
	loop:
	%iv = phi i32 [%start, %entry], [%next, %loop]
	%p = phi %structI* [%base, %entry], [%pinc, %loop]
	%adr = getelementptr %structI* %p, i32 0, i32 0
	store i32 3, i32* %adr
	%pp = bitcast %structI* %p to i32*
	store i32 4, i32* %pp
	%pinc = getelementptr %structI* %p, i32 1
	%next = add i32 %iv, 1
	%cond = icmp ne i32 %next, %limit
	br i1 %cond, label %loop, label %exit

	exit:
	ret void
	}

	define void @maxvisitor(i32 %limit, i32* %base) nounwind {
	entry:
	br label %loop

	; Test inserting a truncate at a phi use.
	;
	; CHECK: loop:
	; CHECK: phi i64
	; CHECK: trunc
	; CHECK: exit:
	loop:
	%idx = phi i32 [ 0, %entry ], [ %idx.next, %loop.inc ]
	%max = phi i32 [ 0, %entry ], [ %max.next, %loop.inc ]
	%idxprom = sext i32 %idx to i64
	%adr = getelementptr inbounds i32* %base, i64 %idxprom
	%val = load i32* %adr
	%cmp19 = icmp sgt i32 %val, %max
	br i1 %cmp19, label %if.then, label %if.else

	if.then:
	br label %loop.inc

	if.else:
	br label %loop.inc

	loop.inc:
	%max.next = phi i32 [ %idx, %if.then ], [ %max, %if.else ]
	%idx.next = add nsw i32 %idx, 1
	%cmp = icmp slt i32 %idx.next, %limit
	br i1 %cmp, label %loop, label %exit

	exit:
	ret void
	}

	define void @identityphi(i32 %limit) nounwind {
	entry:
	br label %loop

	; Test an edge case of removing an identity phi that directly feeds
	; back to the loop iv.
	;
	; CHECK: loop:
	; CHECK: phi i32
	; CHECK-NOT: phi
	; CHECK: exit:
	loop:
	%iv = phi i32 [ 0, %entry], [ %iv.next, %control ]
	br i1 undef, label %if.then, label %control

	if.then:
	br label %control

	control:
	%iv.next = phi i32 [ %iv, %loop ], [ undef, %if.then ]
	%cmp = icmp slt i32 %iv.next, %limit
	br i1 %cmp, label %loop, label %exit

	exit:
	ret void
	}

	define i64 @cloneOr(i32 %limit, i64* %base) nounwind {
	entry:
	; ensure that the loop can't overflow
	%halfLim = ashr i32 %limit, 2
	br label %loop

	; Test cloning an or, which is not an OverflowBinaryOperator.
	;
	; CHECK: loop:
	; CHECK: phi i64
	; CHECK-NOT: sext
	; CHECK: or i64
	; CHECK: exit:
	loop:
	%iv = phi i32 [ 0, %entry], [ %iv.next, %loop ]
	%t1 = sext i32 %iv to i64
	%adr = getelementptr i64* %base, i64 %t1
	%val = load i64* %adr
	%t2 = or i32 %iv, 1
	%t3 = sext i32 %t2 to i64
	%iv.next = add i32 %iv, 2
	%cmp = icmp slt i32 %iv.next, %halfLim
	br i1 %cmp, label %loop, label %exit

	exit:
	%result = and i64 %val, %t3
	ret i64 %result
	}

	; The i induction variable looks like a wrap-around, but it really is just
	; a simple affine IV. Make sure that indvars simplifies through.
	define i32 @indirectRecurrence() nounwind {
	entry:
	br label %loop

	; ReplaceLoopExitValue should fold the return value to constant 9.
	; CHECK: loop:
	; CHECK: phi i32
	; CHECK: ret i32 9
	loop:
	%j.0 = phi i32 [ 1, %entry ], [ %j.next, %cond_true ]
	%i.0 = phi i32 [ 0, %entry ], [ %j.0, %cond_true ]
	%tmp = icmp ne i32 %j.0, 10
	br i1 %tmp, label %cond_true, label %return

	cond_true:
	%j.next = add i32 %j.0, 1
	br label %loop

	return:
	ret i32 %i.0
	}

	; Eliminate the congruent phis j, k, and l.
	; Eliminate the redundant IV increments k.next and l.next.
	; Two phis should remain, one starting at %init, and one at %init1.
	; Two increments should remain, one by %step and one by %step1.
	; CHECK: loop:
	; CHECK: phi i32
	; CHECK: phi i32
	; CHECK-NOT: phi
	; CHECK: add i32
	; CHECK: add i32
	; CHECK: add i32
	; CHECK-NOT: add
	; CHECK: return:
	;
	; Five live-outs should remain.
	; CHECK: lcssa = phi
	; CHECK: lcssa = phi
	; CHECK: lcssa = phi
	; CHECK: lcssa = phi
	; CHECK: lcssa = phi
	; CHECK-NOT: phi
	; CHECK: ret
	define i32 @isomorphic(i32 %init, i32 %step, i32 %lim) nounwind {
	entry:
	%step1 = add i32 %step, 1
	%init1 = add i32 %init, %step1
	%l.0 = sub i32 %init1, %step1
	br label %loop

	loop:
	%ii = phi i32 [ %init1, %entry ], [ %ii.next, %loop ]
	%i = phi i32 [ %init, %entry ], [ %ii, %loop ]
	%j = phi i32 [ %init, %entry ], [ %j.next, %loop ]
	%k = phi i32 [ %init1, %entry ], [ %k.next, %loop ]
	%l = phi i32 [ %l.0, %entry ], [ %l.next, %loop ]
	%ii.next = add i32 %ii, %step1
	%j.next = add i32 %j, %step1
	%k.next = add i32 %k, %step1
	%l.step = add i32 %l, %step
	%l.next = add i32 %l.step, 1
	%cmp = icmp ne i32 %ii.next, %lim
	br i1 %cmp, label %loop, label %return

	return:
	%sum1 = add i32 %i, %j.next
	%sum2 = add i32 %sum1, %k.next
	%sum3 = add i32 %sum1, %l.step
	%sum4 = add i32 %sum1, %l.next
	ret i32 %sum4
	}

	; Test a GEP IV that is derived from another GEP IV by a nop gep that
	; lowers the type without changing the expression.
	%structIF = type { i32, float }

	define void @congruentgepiv(%structIF* %base) nounwind uwtable ssp {
	entry:
	%first = getelementptr inbounds %structIF* %base, i64 0, i32 0
	br label %loop

	; CHECK: loop:
	; CHECK: phi %structIF*
	; CHECK: phi i32*
	; CHECK: getelementptr inbounds
	; CHECK: getelementptr inbounds
	; CHECK: exit:
	loop:
	%ptr.iv = phi %structIF* [ %ptr.inc, %latch ], [ %base, %entry ]
	%next = phi i32* [ %next.inc, %latch ], [ %first, %entry ]
	store i32 4, i32* %next
	br i1 undef, label %latch, label %exit

	latch: ; preds = %for.inc50.i
	%ptr.inc = getelementptr inbounds %structIF* %ptr.iv, i64 1
	%next.inc = getelementptr inbounds %structIF* %ptr.inc, i64 0, i32 0
	br label %loop

	exit:
	ret void
	}

	; Test a widened IV that is used by a phi on different paths within the loop.
	;
	; CHECK: for.body:
	; CHECK: phi i64
	; CHECK: trunc i64
	; CHECK: if.then:
	; CHECK: for.inc:
	; CHECK: phi i32
	; CHECK: for.end:
	define void @phiUsesTrunc() nounwind {
	entry:
	br i1 undef, label %for.body, label %for.end

	for.body:
	%iv = phi i32 [ %inc, %for.inc ], [ 1, %entry ]
	br i1 undef, label %if.then, label %if.else

	if.then:
	br i1 undef, label %if.then33, label %for.inc

	if.then33:
	br label %for.inc

	if.else:
	br i1 undef, label %if.then97, label %for.inc

	if.then97:
	%idxprom100 = sext i32 %iv to i64
	br label %for.inc

	for.inc:
	%kmin.1 = phi i32 [ %iv, %if.then33 ], [ 0, %if.then ], [ %iv, %if.then97 ], [ 0, %if.else ]
	%inc = add nsw i32 %iv, 1
	br i1 undef, label %for.body, label %for.end

	for.end:
	ret void
	}