| //===- BasicAliasAnalysis.cpp - Stateless Alias Analysis Impl -------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file defines the primary stateless implementation of the | |
| // Alias Analysis interface that implements identities (two different | |
| // globals cannot alias, etc), but does no stateful analysis. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Analysis/BasicAliasAnalysis.h" | |
| #include "llvm/ADT/APInt.h" | |
| #include "llvm/ADT/ScopeExit.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/Analysis/AliasAnalysis.h" | |
| #include "llvm/Analysis/AssumptionCache.h" | |
| #include "llvm/Analysis/CFG.h" | |
| #include "llvm/Analysis/CaptureTracking.h" | |
| #include "llvm/Analysis/MemoryBuiltins.h" | |
| #include "llvm/Analysis/MemoryLocation.h" | |
| #include "llvm/Analysis/TargetLibraryInfo.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/IR/Argument.h" | |
| #include "llvm/IR/Attributes.h" | |
| #include "llvm/IR/Constant.h" | |
| #include "llvm/IR/ConstantRange.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DataLayout.h" | |
| #include "llvm/IR/DerivedTypes.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/GetElementPtrTypeIterator.h" | |
| #include "llvm/IR/GlobalAlias.h" | |
| #include "llvm/IR/GlobalVariable.h" | |
| #include "llvm/IR/InstrTypes.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/Intrinsics.h" | |
| #include "llvm/IR/Operator.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/IR/User.h" | |
| #include "llvm/IR/Value.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/KnownBits.h" | |
| #include "llvm/Support/SaveAndRestore.h" | |
| #include <cassert> | |
| #include <cstdint> | |
| #include <cstdlib> | |
| #include <optional> | |
| #include <utility> | |
| #define DEBUG_TYPE "basicaa" | |
| using namespace llvm; | |
| /// Enable analysis of recursive PHI nodes. | |
| static cl::opt<bool> EnableRecPhiAnalysis("basic-aa-recphi", cl::Hidden, | |
| cl::init(true)); | |
| static cl::opt<bool> EnableSeparateStorageAnalysis("basic-aa-separate-storage", | |
| cl::Hidden, cl::init(false)); | |
| /// SearchLimitReached / SearchTimes shows how often the limit of | |
| /// to decompose GEPs is reached. It will affect the precision | |
| /// of basic alias analysis. | |
| STATISTIC(SearchLimitReached, "Number of times the limit to " | |
| "decompose GEPs is reached"); | |
| STATISTIC(SearchTimes, "Number of times a GEP is decomposed"); | |
| // The max limit of the search depth in DecomposeGEPExpression() and | |
| // getUnderlyingObject(). | |
| static const unsigned MaxLookupSearchDepth = 6; | |
| bool BasicAAResult::invalidate(Function &Fn, const PreservedAnalyses &PA, | |
| FunctionAnalysisManager::Invalidator &Inv) { | |
| // We don't care if this analysis itself is preserved, it has no state. But | |
| // we need to check that the analyses it depends on have been. Note that we | |
| // may be created without handles to some analyses and in that case don't | |
| // depend on them. | |
| if (Inv.invalidate<AssumptionAnalysis>(Fn, PA) || | |
| (DT && Inv.invalidate<DominatorTreeAnalysis>(Fn, PA))) | |
| return true; | |
| // Otherwise this analysis result remains valid. | |
| return false; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Useful predicates | |
| //===----------------------------------------------------------------------===// | |
| /// Returns the size of the object specified by V or UnknownSize if unknown. | |
| static uint64_t getObjectSize(const Value *V, const DataLayout &DL, | |
| const TargetLibraryInfo &TLI, | |
| bool NullIsValidLoc, | |
| bool RoundToAlign = false) { | |
| uint64_t Size; | |
| ObjectSizeOpts Opts; | |
| Opts.RoundToAlign = RoundToAlign; | |
| Opts.NullIsUnknownSize = NullIsValidLoc; | |
| if (getObjectSize(V, Size, DL, &TLI, Opts)) | |
| return Size; | |
| return MemoryLocation::UnknownSize; | |
| } | |
| /// Returns true if we can prove that the object specified by V is smaller than | |
| /// Size. | |
| static bool isObjectSmallerThan(const Value *V, uint64_t Size, | |
| const DataLayout &DL, | |
| const TargetLibraryInfo &TLI, | |
| bool NullIsValidLoc) { | |
| // Note that the meanings of the "object" are slightly different in the | |
| // following contexts: | |
| // c1: llvm::getObjectSize() | |
| // c2: llvm.objectsize() intrinsic | |
| // c3: isObjectSmallerThan() | |
| // c1 and c2 share the same meaning; however, the meaning of "object" in c3 | |
| // refers to the "entire object". | |
| // | |
| // Consider this example: | |
| // char *p = (char*)malloc(100) | |
| // char *q = p+80; | |
| // | |
| // In the context of c1 and c2, the "object" pointed by q refers to the | |
| // stretch of memory of q[0:19]. So, getObjectSize(q) should return 20. | |
| // | |
| // However, in the context of c3, the "object" refers to the chunk of memory | |
| // being allocated. So, the "object" has 100 bytes, and q points to the middle | |
| // the "object". In case q is passed to isObjectSmallerThan() as the 1st | |
| // parameter, before the llvm::getObjectSize() is called to get the size of | |
| // entire object, we should: | |
| // - either rewind the pointer q to the base-address of the object in | |
| // question (in this case rewind to p), or | |
| // - just give up. It is up to caller to make sure the pointer is pointing | |
| // to the base address the object. | |
| // | |
| // We go for 2nd option for simplicity. | |
| if (!isIdentifiedObject(V)) | |
| return false; | |
| // This function needs to use the aligned object size because we allow | |
| // reads a bit past the end given sufficient alignment. | |
| uint64_t ObjectSize = getObjectSize(V, DL, TLI, NullIsValidLoc, | |
| /*RoundToAlign*/ true); | |
| return ObjectSize != MemoryLocation::UnknownSize && ObjectSize < Size; | |
| } | |
| /// Return the minimal extent from \p V to the end of the underlying object, | |
| /// assuming the result is used in an aliasing query. E.g., we do use the query | |
| /// location size and the fact that null pointers cannot alias here. | |
| static uint64_t getMinimalExtentFrom(const Value &V, | |
| const LocationSize &LocSize, | |
| const DataLayout &DL, | |
| bool NullIsValidLoc) { | |
| // If we have dereferenceability information we know a lower bound for the | |
| // extent as accesses for a lower offset would be valid. We need to exclude | |
| // the "or null" part if null is a valid pointer. We can ignore frees, as an | |
| // access after free would be undefined behavior. | |
| bool CanBeNull, CanBeFreed; | |
| uint64_t DerefBytes = | |
| V.getPointerDereferenceableBytes(DL, CanBeNull, CanBeFreed); | |
| DerefBytes = (CanBeNull && NullIsValidLoc) ? 0 : DerefBytes; | |
| // If queried with a precise location size, we assume that location size to be | |
| // accessed, thus valid. | |
| if (LocSize.isPrecise()) | |
| DerefBytes = std::max(DerefBytes, LocSize.getValue()); | |
| return DerefBytes; | |
| } | |
| /// Returns true if we can prove that the object specified by V has size Size. | |
| static bool isObjectSize(const Value *V, uint64_t Size, const DataLayout &DL, | |
| const TargetLibraryInfo &TLI, bool NullIsValidLoc) { | |
| uint64_t ObjectSize = getObjectSize(V, DL, TLI, NullIsValidLoc); | |
| return ObjectSize != MemoryLocation::UnknownSize && ObjectSize == Size; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // CaptureInfo implementations | |
| //===----------------------------------------------------------------------===// | |
| CaptureInfo::~CaptureInfo() = default; | |
| bool SimpleCaptureInfo::isNotCapturedBeforeOrAt(const Value *Object, | |
| const Instruction *I) { | |
| return isNonEscapingLocalObject(Object, &IsCapturedCache); | |
| } | |
| bool EarliestEscapeInfo::isNotCapturedBeforeOrAt(const Value *Object, | |
| const Instruction *I) { | |
| if (!isIdentifiedFunctionLocal(Object)) | |
| return false; | |
| auto Iter = EarliestEscapes.insert({Object, nullptr}); | |
| if (Iter.second) { | |
| Instruction *EarliestCapture = FindEarliestCapture( | |
| Object, *const_cast<Function *>(I->getFunction()), | |
| /*ReturnCaptures=*/false, /*StoreCaptures=*/true, DT, EphValues); | |
| if (EarliestCapture) { | |
| auto Ins = Inst2Obj.insert({EarliestCapture, {}}); | |
| Ins.first->second.push_back(Object); | |
| } | |
| Iter.first->second = EarliestCapture; | |
| } | |
| // No capturing instruction. | |
| if (!Iter.first->second) | |
| return true; | |
| return I != Iter.first->second && | |
| !isPotentiallyReachable(Iter.first->second, I, nullptr, &DT, &LI); | |
| } | |
| void EarliestEscapeInfo::removeInstruction(Instruction *I) { | |
| auto Iter = Inst2Obj.find(I); | |
| if (Iter != Inst2Obj.end()) { | |
| for (const Value *Obj : Iter->second) | |
| EarliestEscapes.erase(Obj); | |
| Inst2Obj.erase(I); | |
| } | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // GetElementPtr Instruction Decomposition and Analysis | |
| //===----------------------------------------------------------------------===// | |
| namespace { | |
| /// Represents zext(sext(trunc(V))). | |
| struct CastedValue { | |
| const Value *V; | |
| unsigned ZExtBits = 0; | |
| unsigned SExtBits = 0; | |
| unsigned TruncBits = 0; | |
| explicit CastedValue(const Value *V) : V(V) {} | |
| explicit CastedValue(const Value *V, unsigned ZExtBits, unsigned SExtBits, | |
| unsigned TruncBits) | |
| : V(V), ZExtBits(ZExtBits), SExtBits(SExtBits), TruncBits(TruncBits) {} | |
| unsigned getBitWidth() const { | |
| return V->getType()->getPrimitiveSizeInBits() - TruncBits + ZExtBits + | |
| SExtBits; | |
| } | |
| CastedValue withValue(const Value *NewV) const { | |
| return CastedValue(NewV, ZExtBits, SExtBits, TruncBits); | |
| } | |
| /// Replace V with zext(NewV) | |
| CastedValue withZExtOfValue(const Value *NewV) const { | |
| unsigned ExtendBy = V->getType()->getPrimitiveSizeInBits() - | |
| NewV->getType()->getPrimitiveSizeInBits(); | |
| if (ExtendBy <= TruncBits) | |
| return CastedValue(NewV, ZExtBits, SExtBits, TruncBits - ExtendBy); | |
| // zext(sext(zext(NewV))) == zext(zext(zext(NewV))) | |
| ExtendBy -= TruncBits; | |
| return CastedValue(NewV, ZExtBits + SExtBits + ExtendBy, 0, 0); | |
| } | |
| /// Replace V with sext(NewV) | |
| CastedValue withSExtOfValue(const Value *NewV) const { | |
| unsigned ExtendBy = V->getType()->getPrimitiveSizeInBits() - | |
| NewV->getType()->getPrimitiveSizeInBits(); | |
| if (ExtendBy <= TruncBits) | |
| return CastedValue(NewV, ZExtBits, SExtBits, TruncBits - ExtendBy); | |
| // zext(sext(sext(NewV))) | |
| ExtendBy -= TruncBits; | |
| return CastedValue(NewV, ZExtBits, SExtBits + ExtendBy, 0); | |
| } | |
| APInt evaluateWith(APInt N) const { | |
| assert(N.getBitWidth() == V->getType()->getPrimitiveSizeInBits() && | |
| "Incompatible bit width"); | |
| if (TruncBits) N = N.trunc(N.getBitWidth() - TruncBits); | |
| if (SExtBits) N = N.sext(N.getBitWidth() + SExtBits); | |
| if (ZExtBits) N = N.zext(N.getBitWidth() + ZExtBits); | |
| return N; | |
| } | |
| ConstantRange evaluateWith(ConstantRange N) const { | |
| assert(N.getBitWidth() == V->getType()->getPrimitiveSizeInBits() && | |
| "Incompatible bit width"); | |
| if (TruncBits) N = N.truncate(N.getBitWidth() - TruncBits); | |
| if (SExtBits) N = N.signExtend(N.getBitWidth() + SExtBits); | |
| if (ZExtBits) N = N.zeroExtend(N.getBitWidth() + ZExtBits); | |
| return N; | |
| } | |
| bool canDistributeOver(bool NUW, bool NSW) const { | |
| // zext(x op<nuw> y) == zext(x) op<nuw> zext(y) | |
| // sext(x op<nsw> y) == sext(x) op<nsw> sext(y) | |
| // trunc(x op y) == trunc(x) op trunc(y) | |
| return (!ZExtBits || NUW) && (!SExtBits || NSW); | |
| } | |
| bool hasSameCastsAs(const CastedValue &Other) const { | |
| return ZExtBits == Other.ZExtBits && SExtBits == Other.SExtBits && | |
| TruncBits == Other.TruncBits; | |
| } | |
| }; | |
| /// Represents zext(sext(trunc(V))) * Scale + Offset. | |
| struct LinearExpression { | |
| CastedValue Val; | |
| APInt Scale; | |
| APInt Offset; | |
| /// True if all operations in this expression are NSW. | |
| bool IsNSW; | |
| LinearExpression(const CastedValue &Val, const APInt &Scale, | |
| const APInt &Offset, bool IsNSW) | |
| : Val(Val), Scale(Scale), Offset(Offset), IsNSW(IsNSW) {} | |
| LinearExpression(const CastedValue &Val) : Val(Val), IsNSW(true) { | |
| unsigned BitWidth = Val.getBitWidth(); | |
| Scale = APInt(BitWidth, 1); | |
| Offset = APInt(BitWidth, 0); | |
| } | |
| LinearExpression mul(const APInt &Other, bool MulIsNSW) const { | |
| // The check for zero offset is necessary, because generally | |
| // (X +nsw Y) *nsw Z does not imply (X *nsw Z) +nsw (Y *nsw Z). | |
| bool NSW = IsNSW && (Other.isOne() || (MulIsNSW && Offset.isZero())); | |
| return LinearExpression(Val, Scale * Other, Offset * Other, NSW); | |
| } | |
| }; | |
| } | |
| /// Analyzes the specified value as a linear expression: "A*V + B", where A and | |
| /// B are constant integers. | |
| static LinearExpression GetLinearExpression( | |
| const CastedValue &Val, const DataLayout &DL, unsigned Depth, | |
| AssumptionCache *AC, DominatorTree *DT) { | |
| // Limit our recursion depth. | |
| if (Depth == 6) | |
| return Val; | |
| if (const ConstantInt *Const = dyn_cast<ConstantInt>(Val.V)) | |
| return LinearExpression(Val, APInt(Val.getBitWidth(), 0), | |
| Val.evaluateWith(Const->getValue()), true); | |
| if (const BinaryOperator *BOp = dyn_cast<BinaryOperator>(Val.V)) { | |
| if (ConstantInt *RHSC = dyn_cast<ConstantInt>(BOp->getOperand(1))) { | |
| APInt RHS = Val.evaluateWith(RHSC->getValue()); | |
| // The only non-OBO case we deal with is or, and only limited to the | |
| // case where it is both nuw and nsw. | |
| bool NUW = true, NSW = true; | |
| if (isa<OverflowingBinaryOperator>(BOp)) { | |
| NUW &= BOp->hasNoUnsignedWrap(); | |
| NSW &= BOp->hasNoSignedWrap(); | |
| } | |
| if (!Val.canDistributeOver(NUW, NSW)) | |
| return Val; | |
| // While we can distribute over trunc, we cannot preserve nowrap flags | |
| // in that case. | |
| if (Val.TruncBits) | |
| NUW = NSW = false; | |
| LinearExpression E(Val); | |
| switch (BOp->getOpcode()) { | |
| default: | |
| // We don't understand this instruction, so we can't decompose it any | |
| // further. | |
| return Val; | |
| case Instruction::Or: | |
| // X|C == X+C if all the bits in C are unset in X. Otherwise we can't | |
| // analyze it. | |
| if (!MaskedValueIsZero(BOp->getOperand(0), RHSC->getValue(), DL, 0, AC, | |
| BOp, DT)) | |
| return Val; | |
| [[fallthrough]]; | |
| case Instruction::Add: { | |
| E = GetLinearExpression(Val.withValue(BOp->getOperand(0)), DL, | |
| Depth + 1, AC, DT); | |
| E.Offset += RHS; | |
| E.IsNSW &= NSW; | |
| break; | |
| } | |
| case Instruction::Sub: { | |
| E = GetLinearExpression(Val.withValue(BOp->getOperand(0)), DL, | |
| Depth + 1, AC, DT); | |
| E.Offset -= RHS; | |
| E.IsNSW &= NSW; | |
| break; | |
| } | |
| case Instruction::Mul: | |
| E = GetLinearExpression(Val.withValue(BOp->getOperand(0)), DL, | |
| Depth + 1, AC, DT) | |
| .mul(RHS, NSW); | |
| break; | |
| case Instruction::Shl: | |
| // We're trying to linearize an expression of the kind: | |
| // shl i8 -128, 36 | |
| // where the shift count exceeds the bitwidth of the type. | |
| // We can't decompose this further (the expression would return | |
| // a poison value). | |
| if (RHS.getLimitedValue() > Val.getBitWidth()) | |
| return Val; | |
| E = GetLinearExpression(Val.withValue(BOp->getOperand(0)), DL, | |
| Depth + 1, AC, DT); | |
| E.Offset <<= RHS.getLimitedValue(); | |
| E.Scale <<= RHS.getLimitedValue(); | |
| E.IsNSW &= NSW; | |
| break; | |
| } | |
| return E; | |
| } | |
| } | |
| if (isa<ZExtInst>(Val.V)) | |
| return GetLinearExpression( | |
| Val.withZExtOfValue(cast<CastInst>(Val.V)->getOperand(0)), | |
| DL, Depth + 1, AC, DT); | |
| if (isa<SExtInst>(Val.V)) | |
| return GetLinearExpression( | |
| Val.withSExtOfValue(cast<CastInst>(Val.V)->getOperand(0)), | |
| DL, Depth + 1, AC, DT); | |
| return Val; | |
| } | |
| /// To ensure a pointer offset fits in an integer of size IndexSize | |
| /// (in bits) when that size is smaller than the maximum index size. This is | |
| /// an issue, for example, in particular for 32b pointers with negative indices | |
| /// that rely on two's complement wrap-arounds for precise alias information | |
| /// where the maximum index size is 64b. | |
| static APInt adjustToIndexSize(const APInt &Offset, unsigned IndexSize) { | |
| assert(IndexSize <= Offset.getBitWidth() && "Invalid IndexSize!"); | |
| unsigned ShiftBits = Offset.getBitWidth() - IndexSize; | |
| return (Offset << ShiftBits).ashr(ShiftBits); | |
| } | |
| namespace { | |
| // A linear transformation of a Value; this class represents | |
| // ZExt(SExt(Trunc(V, TruncBits), SExtBits), ZExtBits) * Scale. | |
| struct VariableGEPIndex { | |
| CastedValue Val; | |
| APInt Scale; | |
| // Context instruction to use when querying information about this index. | |
| const Instruction *CxtI; | |
| /// True if all operations in this expression are NSW. | |
| bool IsNSW; | |
| void dump() const { | |
| print(dbgs()); | |
| dbgs() << "\n"; | |
| } | |
| void print(raw_ostream &OS) const { | |
| OS << "(V=" << Val.V->getName() | |
| << ", zextbits=" << Val.ZExtBits | |
| << ", sextbits=" << Val.SExtBits | |
| << ", truncbits=" << Val.TruncBits | |
| << ", scale=" << Scale << ")"; | |
| } | |
| }; | |
| } | |
| // Represents the internal structure of a GEP, decomposed into a base pointer, | |
| // constant offsets, and variable scaled indices. | |
| struct BasicAAResult::DecomposedGEP { | |
| // Base pointer of the GEP | |
| const Value *Base; | |
| // Total constant offset from base. | |
| APInt Offset; | |
| // Scaled variable (non-constant) indices. | |
| SmallVector<VariableGEPIndex, 4> VarIndices; | |
| // Are all operations inbounds GEPs or non-indexing operations? | |
| // (std::nullopt iff expression doesn't involve any geps) | |
| std::optional<bool> InBounds; | |
| void dump() const { | |
| print(dbgs()); | |
| dbgs() << "\n"; | |
| } | |
| void print(raw_ostream &OS) const { | |
| OS << "(DecomposedGEP Base=" << Base->getName() | |
| << ", Offset=" << Offset | |
| << ", VarIndices=["; | |
| for (size_t i = 0; i < VarIndices.size(); i++) { | |
| if (i != 0) | |
| OS << ", "; | |
| VarIndices[i].print(OS); | |
| } | |
| OS << "])"; | |
| } | |
| }; | |
| /// If V is a symbolic pointer expression, decompose it into a base pointer | |
| /// with a constant offset and a number of scaled symbolic offsets. | |
| /// | |
| /// The scaled symbolic offsets (represented by pairs of a Value* and a scale | |
| /// in the VarIndices vector) are Value*'s that are known to be scaled by the | |
| /// specified amount, but which may have other unrepresented high bits. As | |
| /// such, the gep cannot necessarily be reconstructed from its decomposed form. | |
| BasicAAResult::DecomposedGEP | |
| BasicAAResult::DecomposeGEPExpression(const Value *V, const DataLayout &DL, | |
| AssumptionCache *AC, DominatorTree *DT) { | |
| // Limit recursion depth to limit compile time in crazy cases. | |
| unsigned MaxLookup = MaxLookupSearchDepth; | |
| SearchTimes++; | |
| const Instruction *CxtI = dyn_cast<Instruction>(V); | |
| unsigned MaxIndexSize = DL.getMaxIndexSizeInBits(); | |
| DecomposedGEP Decomposed; | |
| Decomposed.Offset = APInt(MaxIndexSize, 0); | |
| do { | |
| // See if this is a bitcast or GEP. | |
| const Operator *Op = dyn_cast<Operator>(V); | |
| if (!Op) { | |
| // The only non-operator case we can handle are GlobalAliases. | |
| if (const GlobalAlias *GA = dyn_cast<GlobalAlias>(V)) { | |
| if (!GA->isInterposable()) { | |
| V = GA->getAliasee(); | |
| continue; | |
| } | |
| } | |
| Decomposed.Base = V; | |
| return Decomposed; | |
| } | |
| if (Op->getOpcode() == Instruction::BitCast || | |
| Op->getOpcode() == Instruction::AddrSpaceCast) { | |
| V = Op->getOperand(0); | |
| continue; | |
| } | |
| const GEPOperator *GEPOp = dyn_cast<GEPOperator>(Op); | |
| if (!GEPOp) { | |
| if (const auto *PHI = dyn_cast<PHINode>(V)) { | |
| // Look through single-arg phi nodes created by LCSSA. | |
| if (PHI->getNumIncomingValues() == 1) { | |
| V = PHI->getIncomingValue(0); | |
| continue; | |
| } | |
| } else if (const auto *Call = dyn_cast<CallBase>(V)) { | |
| // CaptureTracking can know about special capturing properties of some | |
| // intrinsics like launder.invariant.group, that can't be expressed with | |
| // the attributes, but have properties like returning aliasing pointer. | |
| // Because some analysis may assume that nocaptured pointer is not | |
| // returned from some special intrinsic (because function would have to | |
| // be marked with returns attribute), it is crucial to use this function | |
| // because it should be in sync with CaptureTracking. Not using it may | |
| // cause weird miscompilations where 2 aliasing pointers are assumed to | |
| // noalias. | |
| if (auto *RP = getArgumentAliasingToReturnedPointer(Call, false)) { | |
| V = RP; | |
| continue; | |
| } | |
| } | |
| Decomposed.Base = V; | |
| return Decomposed; | |
| } | |
| // Track whether we've seen at least one in bounds gep, and if so, whether | |
| // all geps parsed were in bounds. | |
| if (Decomposed.InBounds == std::nullopt) | |
| Decomposed.InBounds = GEPOp->isInBounds(); | |
| else if (!GEPOp->isInBounds()) | |
| Decomposed.InBounds = false; | |
| assert(GEPOp->getSourceElementType()->isSized() && "GEP must be sized"); | |
| unsigned AS = GEPOp->getPointerAddressSpace(); | |
| // Walk the indices of the GEP, accumulating them into BaseOff/VarIndices. | |
| gep_type_iterator GTI = gep_type_begin(GEPOp); | |
| unsigned IndexSize = DL.getIndexSizeInBits(AS); | |
| // Assume all GEP operands are constants until proven otherwise. | |
| bool GepHasConstantOffset = true; | |
| for (User::const_op_iterator I = GEPOp->op_begin() + 1, E = GEPOp->op_end(); | |
| I != E; ++I, ++GTI) { | |
| const Value *Index = *I; | |
| // Compute the (potentially symbolic) offset in bytes for this index. | |
| if (StructType *STy = GTI.getStructTypeOrNull()) { | |
| // For a struct, add the member offset. | |
| unsigned FieldNo = cast<ConstantInt>(Index)->getZExtValue(); | |
| if (FieldNo == 0) | |
| continue; | |
| Decomposed.Offset += DL.getStructLayout(STy)->getElementOffset(FieldNo); | |
| continue; | |
| } | |
| // For an array/pointer, add the element offset, explicitly scaled. | |
| if (const ConstantInt *CIdx = dyn_cast<ConstantInt>(Index)) { | |
| if (CIdx->isZero()) | |
| continue; | |
| // Don't attempt to analyze GEPs if the scalable index is not zero. | |
| TypeSize AllocTypeSize = DL.getTypeAllocSize(GTI.getIndexedType()); | |
| if (AllocTypeSize.isScalable()) { | |
| Decomposed.Base = V; | |
| return Decomposed; | |
| } | |
| Decomposed.Offset += AllocTypeSize.getFixedValue() * | |
| CIdx->getValue().sextOrTrunc(MaxIndexSize); | |
| continue; | |
| } | |
| TypeSize AllocTypeSize = DL.getTypeAllocSize(GTI.getIndexedType()); | |
| if (AllocTypeSize.isScalable()) { | |
| Decomposed.Base = V; | |
| return Decomposed; | |
| } | |
| GepHasConstantOffset = false; | |
| // If the integer type is smaller than the index size, it is implicitly | |
| // sign extended or truncated to index size. | |
| unsigned Width = Index->getType()->getIntegerBitWidth(); | |
| unsigned SExtBits = IndexSize > Width ? IndexSize - Width : 0; | |
| unsigned TruncBits = IndexSize < Width ? Width - IndexSize : 0; | |
| LinearExpression LE = GetLinearExpression( | |
| CastedValue(Index, 0, SExtBits, TruncBits), DL, 0, AC, DT); | |
| // Scale by the type size. | |
| unsigned TypeSize = AllocTypeSize.getFixedValue(); | |
| LE = LE.mul(APInt(IndexSize, TypeSize), GEPOp->isInBounds()); | |
| Decomposed.Offset += LE.Offset.sext(MaxIndexSize); | |
| APInt Scale = LE.Scale.sext(MaxIndexSize); | |
| // If we already had an occurrence of this index variable, merge this | |
| // scale into it. For example, we want to handle: | |
| // A[x][x] -> x*16 + x*4 -> x*20 | |
| // This also ensures that 'x' only appears in the index list once. | |
| for (unsigned i = 0, e = Decomposed.VarIndices.size(); i != e; ++i) { | |
| if (Decomposed.VarIndices[i].Val.V == LE.Val.V && | |
| Decomposed.VarIndices[i].Val.hasSameCastsAs(LE.Val)) { | |
| Scale += Decomposed.VarIndices[i].Scale; | |
| Decomposed.VarIndices.erase(Decomposed.VarIndices.begin() + i); | |
| break; | |
| } | |
| } | |
| // Make sure that we have a scale that makes sense for this target's | |
| // index size. | |
| Scale = adjustToIndexSize(Scale, IndexSize); | |
| if (!!Scale) { | |
| VariableGEPIndex Entry = {LE.Val, Scale, CxtI, LE.IsNSW}; | |
| Decomposed.VarIndices.push_back(Entry); | |
| } | |
| } | |
| // Take care of wrap-arounds | |
| if (GepHasConstantOffset) | |
| Decomposed.Offset = adjustToIndexSize(Decomposed.Offset, IndexSize); | |
| // Analyze the base pointer next. | |
| V = GEPOp->getOperand(0); | |
| } while (--MaxLookup); | |
| // If the chain of expressions is too deep, just return early. | |
| Decomposed.Base = V; | |
| SearchLimitReached++; | |
| return Decomposed; | |
| } | |
| ModRefInfo BasicAAResult::getModRefInfoMask(const MemoryLocation &Loc, | |
| AAQueryInfo &AAQI, | |
| bool IgnoreLocals) { | |
| assert(Visited.empty() && "Visited must be cleared after use!"); | |
| auto _ = make_scope_exit([&] { Visited.clear(); }); | |
| unsigned MaxLookup = 8; | |
| SmallVector<const Value *, 16> Worklist; | |
| Worklist.push_back(Loc.Ptr); | |
| ModRefInfo Result = ModRefInfo::NoModRef; | |
| do { | |
| const Value *V = getUnderlyingObject(Worklist.pop_back_val()); | |
| if (!Visited.insert(V).second) | |
| continue; | |
| // Ignore allocas if we were instructed to do so. | |
| if (IgnoreLocals && isa<AllocaInst>(V)) | |
| continue; | |
| // If the location points to memory that is known to be invariant for | |
| // the life of the underlying SSA value, then we can exclude Mod from | |
| // the set of valid memory effects. | |
| // | |
| // An argument that is marked readonly and noalias is known to be | |
| // invariant while that function is executing. | |
| if (const Argument *Arg = dyn_cast<Argument>(V)) { | |
| if (Arg->hasNoAliasAttr() && Arg->onlyReadsMemory()) { | |
| Result |= ModRefInfo::Ref; | |
| continue; | |
| } | |
| } | |
| // A global constant can't be mutated. | |
| if (const GlobalVariable *GV = dyn_cast<GlobalVariable>(V)) { | |
| // Note: this doesn't require GV to be "ODR" because it isn't legal for a | |
| // global to be marked constant in some modules and non-constant in | |
| // others. GV may even be a declaration, not a definition. | |
| if (!GV->isConstant()) | |
| return AAResultBase::getModRefInfoMask(Loc, AAQI, IgnoreLocals); | |
| continue; | |
| } | |
| // If both select values point to local memory, then so does the select. | |
| if (const SelectInst *SI = dyn_cast<SelectInst>(V)) { | |
| Worklist.push_back(SI->getTrueValue()); | |
| Worklist.push_back(SI->getFalseValue()); | |
| continue; | |
| } | |
| // If all values incoming to a phi node point to local memory, then so does | |
| // the phi. | |
| if (const PHINode *PN = dyn_cast<PHINode>(V)) { | |
| // Don't bother inspecting phi nodes with many operands. | |
| if (PN->getNumIncomingValues() > MaxLookup) | |
| return AAResultBase::getModRefInfoMask(Loc, AAQI, IgnoreLocals); | |
| append_range(Worklist, PN->incoming_values()); | |
| continue; | |
| } | |
| // Otherwise be conservative. | |
| return AAResultBase::getModRefInfoMask(Loc, AAQI, IgnoreLocals); | |
| } while (!Worklist.empty() && --MaxLookup); | |
| // If we hit the maximum number of instructions to examine, be conservative. | |
| if (!Worklist.empty()) | |
| return AAResultBase::getModRefInfoMask(Loc, AAQI, IgnoreLocals); | |
| return Result; | |
| } | |
| static bool isIntrinsicCall(const CallBase *Call, Intrinsic::ID IID) { | |
| const IntrinsicInst *II = dyn_cast<IntrinsicInst>(Call); | |
| return II && II->getIntrinsicID() == IID; | |
| } | |
| /// Returns the behavior when calling the given call site. | |
| MemoryEffects BasicAAResult::getMemoryEffects(const CallBase *Call, | |
| AAQueryInfo &AAQI) { | |
| MemoryEffects Min = Call->getAttributes().getMemoryEffects(); | |
| if (const Function *F = dyn_cast<Function>(Call->getCalledOperand())) { | |
| MemoryEffects FuncME = AAQI.AAR.getMemoryEffects(F); | |
| // Operand bundles on the call may also read or write memory, in addition | |
| // to the behavior of the called function. | |
| if (Call->hasReadingOperandBundles()) | |
| FuncME |= MemoryEffects::readOnly(); | |
| if (Call->hasClobberingOperandBundles()) | |
| FuncME |= MemoryEffects::writeOnly(); | |
| Min &= FuncME; | |
| } | |
| return Min; | |
| } | |
| /// Returns the behavior when calling the given function. For use when the call | |
| /// site is not known. | |
| MemoryEffects BasicAAResult::getMemoryEffects(const Function *F) { | |
| switch (F->getIntrinsicID()) { | |
| case Intrinsic::experimental_guard: | |
| case Intrinsic::experimental_deoptimize: | |
| // These intrinsics can read arbitrary memory, and additionally modref | |
| // inaccessible memory to model control dependence. | |
| return MemoryEffects::readOnly() | | |
| MemoryEffects::inaccessibleMemOnly(ModRefInfo::ModRef); | |
| } | |
| return F->getMemoryEffects(); | |
| } | |
| ModRefInfo BasicAAResult::getArgModRefInfo(const CallBase *Call, | |
| unsigned ArgIdx) { | |
| if (Call->paramHasAttr(ArgIdx, Attribute::WriteOnly)) | |
| return ModRefInfo::Mod; | |
| if (Call->paramHasAttr(ArgIdx, Attribute::ReadOnly)) | |
| return ModRefInfo::Ref; | |
| if (Call->paramHasAttr(ArgIdx, Attribute::ReadNone)) | |
| return ModRefInfo::NoModRef; | |
| return AAResultBase::getArgModRefInfo(Call, ArgIdx); | |
| } | |
| #ifndef NDEBUG | |
| static const Function *getParent(const Value *V) { | |
| if (const Instruction *inst = dyn_cast<Instruction>(V)) { | |
| if (!inst->getParent()) | |
| return nullptr; | |
| return inst->getParent()->getParent(); | |
| } | |
| if (const Argument *arg = dyn_cast<Argument>(V)) | |
| return arg->getParent(); | |
| return nullptr; | |
| } | |
| static bool notDifferentParent(const Value *O1, const Value *O2) { | |
| const Function *F1 = getParent(O1); | |
| const Function *F2 = getParent(O2); | |
| return !F1 || !F2 || F1 == F2; | |
| } | |
| #endif | |
| AliasResult BasicAAResult::alias(const MemoryLocation &LocA, | |
| const MemoryLocation &LocB, AAQueryInfo &AAQI, | |
| const Instruction *CtxI) { | |
| assert(notDifferentParent(LocA.Ptr, LocB.Ptr) && | |
| "BasicAliasAnalysis doesn't support interprocedural queries."); | |
| return aliasCheck(LocA.Ptr, LocA.Size, LocB.Ptr, LocB.Size, AAQI, CtxI); | |
| } | |
| /// Checks to see if the specified callsite can clobber the specified memory | |
| /// object. | |
| /// | |
| /// Since we only look at local properties of this function, we really can't | |
| /// say much about this query. We do, however, use simple "address taken" | |
| /// analysis on local objects. | |
| ModRefInfo BasicAAResult::getModRefInfo(const CallBase *Call, | |
| const MemoryLocation &Loc, | |
| AAQueryInfo &AAQI) { | |
| assert(notDifferentParent(Call, Loc.Ptr) && | |
| "AliasAnalysis query involving multiple functions!"); | |
| const Value *Object = getUnderlyingObject(Loc.Ptr); | |
| // Calls marked 'tail' cannot read or write allocas from the current frame | |
| // because the current frame might be destroyed by the time they run. However, | |
| // a tail call may use an alloca with byval. Calling with byval copies the | |
| // contents of the alloca into argument registers or stack slots, so there is | |
| // no lifetime issue. | |
| if (isa<AllocaInst>(Object)) | |
| if (const CallInst *CI = dyn_cast<CallInst>(Call)) | |
| if (CI->isTailCall() && | |
| !CI->getAttributes().hasAttrSomewhere(Attribute::ByVal)) | |
| return ModRefInfo::NoModRef; | |
| // Stack restore is able to modify unescaped dynamic allocas. Assume it may | |
| // modify them even though the alloca is not escaped. | |
| if (auto *AI = dyn_cast<AllocaInst>(Object)) | |
| if (!AI->isStaticAlloca() && isIntrinsicCall(Call, Intrinsic::stackrestore)) | |
| return ModRefInfo::Mod; | |
| // If the pointer is to a locally allocated object that does not escape, | |
| // then the call can not mod/ref the pointer unless the call takes the pointer | |
| // as an argument, and itself doesn't capture it. | |
| if (!isa<Constant>(Object) && Call != Object && | |
| AAQI.CI->isNotCapturedBeforeOrAt(Object, Call)) { | |
| // Optimistically assume that call doesn't touch Object and check this | |
| // assumption in the following loop. | |
| ModRefInfo Result = ModRefInfo::NoModRef; | |
| unsigned OperandNo = 0; | |
| for (auto CI = Call->data_operands_begin(), CE = Call->data_operands_end(); | |
| CI != CE; ++CI, ++OperandNo) { | |
| // Only look at the no-capture or byval pointer arguments. If this | |
| // pointer were passed to arguments that were neither of these, then it | |
| // couldn't be no-capture. | |
| if (!(*CI)->getType()->isPointerTy() || | |
| (!Call->doesNotCapture(OperandNo) && OperandNo < Call->arg_size() && | |
| !Call->isByValArgument(OperandNo))) | |
| continue; | |
| // Call doesn't access memory through this operand, so we don't care | |
| // if it aliases with Object. | |
| if (Call->doesNotAccessMemory(OperandNo)) | |
| continue; | |
| // If this is a no-capture pointer argument, see if we can tell that it | |
| // is impossible to alias the pointer we're checking. | |
| AliasResult AR = | |
| AAQI.AAR.alias(MemoryLocation::getBeforeOrAfter(*CI), | |
| MemoryLocation::getBeforeOrAfter(Object), AAQI); | |
| // Operand doesn't alias 'Object', continue looking for other aliases | |
| if (AR == AliasResult::NoAlias) | |
| continue; | |
| // Operand aliases 'Object', but call doesn't modify it. Strengthen | |
| // initial assumption and keep looking in case if there are more aliases. | |
| if (Call->onlyReadsMemory(OperandNo)) { | |
| Result |= ModRefInfo::Ref; | |
| continue; | |
| } | |
| // Operand aliases 'Object' but call only writes into it. | |
| if (Call->onlyWritesMemory(OperandNo)) { | |
| Result |= ModRefInfo::Mod; | |
| continue; | |
| } | |
| // This operand aliases 'Object' and call reads and writes into it. | |
| // Setting ModRef will not yield an early return below, MustAlias is not | |
| // used further. | |
| Result = ModRefInfo::ModRef; | |
| break; | |
| } | |
| // Early return if we improved mod ref information | |
| if (!isModAndRefSet(Result)) | |
| return Result; | |
| } | |
| // If the call is malloc/calloc like, we can assume that it doesn't | |
| // modify any IR visible value. This is only valid because we assume these | |
| // routines do not read values visible in the IR. TODO: Consider special | |
| // casing realloc and strdup routines which access only their arguments as | |
| // well. Or alternatively, replace all of this with inaccessiblememonly once | |
| // that's implemented fully. | |
| if (isMallocOrCallocLikeFn(Call, &TLI)) { | |
| // Be conservative if the accessed pointer may alias the allocation - | |
| // fallback to the generic handling below. | |
| if (AAQI.AAR.alias(MemoryLocation::getBeforeOrAfter(Call), Loc, AAQI) == | |
| AliasResult::NoAlias) | |
| return ModRefInfo::NoModRef; | |
| } | |
| // Like assumes, invariant.start intrinsics were also marked as arbitrarily | |
| // writing so that proper control dependencies are maintained but they never | |
| // mod any particular memory location visible to the IR. | |
| // *Unlike* assumes (which are now modeled as NoModRef), invariant.start | |
| // intrinsic is now modeled as reading memory. This prevents hoisting the | |
| // invariant.start intrinsic over stores. Consider: | |
| // *ptr = 40; | |
| // *ptr = 50; | |
| // invariant_start(ptr) | |
| // int val = *ptr; | |
| // print(val); | |
| // | |
| // This cannot be transformed to: | |
| // | |
| // *ptr = 40; | |
| // invariant_start(ptr) | |
| // *ptr = 50; | |
| // int val = *ptr; | |
| // print(val); | |
| // | |
| // The transformation will cause the second store to be ignored (based on | |
| // rules of invariant.start) and print 40, while the first program always | |
| // prints 50. | |
| if (isIntrinsicCall(Call, Intrinsic::invariant_start)) | |
| return ModRefInfo::Ref; | |
| // The AAResultBase base class has some smarts, lets use them. | |
| return AAResultBase::getModRefInfo(Call, Loc, AAQI); | |
| } | |
| ModRefInfo BasicAAResult::getModRefInfo(const CallBase *Call1, | |
| const CallBase *Call2, | |
| AAQueryInfo &AAQI) { | |
| // Guard intrinsics are marked as arbitrarily writing so that proper control | |
| // dependencies are maintained but they never mods any particular memory | |
| // location. | |
| // | |
| // *Unlike* assumes, guard intrinsics are modeled as reading memory since the | |
| // heap state at the point the guard is issued needs to be consistent in case | |
| // the guard invokes the "deopt" continuation. | |
| // NB! This function is *not* commutative, so we special case two | |
| // possibilities for guard intrinsics. | |
| if (isIntrinsicCall(Call1, Intrinsic::experimental_guard)) | |
| return isModSet(getMemoryEffects(Call2, AAQI).getModRef()) | |
| ? ModRefInfo::Ref | |
| : ModRefInfo::NoModRef; | |
| if (isIntrinsicCall(Call2, Intrinsic::experimental_guard)) | |
| return isModSet(getMemoryEffects(Call1, AAQI).getModRef()) | |
| ? ModRefInfo::Mod | |
| : ModRefInfo::NoModRef; | |
| // The AAResultBase base class has some smarts, lets use them. | |
| return AAResultBase::getModRefInfo(Call1, Call2, AAQI); | |
| } | |
| /// Return true if we know V to the base address of the corresponding memory | |
| /// object. This implies that any address less than V must be out of bounds | |
| /// for the underlying object. Note that just being isIdentifiedObject() is | |
| /// not enough - For example, a negative offset from a noalias argument or call | |
| /// can be inbounds w.r.t the actual underlying object. | |
| static bool isBaseOfObject(const Value *V) { | |
| // TODO: We can handle other cases here | |
| // 1) For GC languages, arguments to functions are often required to be | |
| // base pointers. | |
| // 2) Result of allocation routines are often base pointers. Leverage TLI. | |
| return (isa<AllocaInst>(V) || isa<GlobalVariable>(V)); | |
| } | |
| /// Provides a bunch of ad-hoc rules to disambiguate a GEP instruction against | |
| /// another pointer. | |
| /// | |
| /// We know that V1 is a GEP, but we don't know anything about V2. | |
| /// UnderlyingV1 is getUnderlyingObject(GEP1), UnderlyingV2 is the same for | |
| /// V2. | |
| AliasResult BasicAAResult::aliasGEP( | |
| const GEPOperator *GEP1, LocationSize V1Size, | |
| const Value *V2, LocationSize V2Size, | |
| const Value *UnderlyingV1, const Value *UnderlyingV2, AAQueryInfo &AAQI) { | |
| if (!V1Size.hasValue() && !V2Size.hasValue()) { | |
| // TODO: This limitation exists for compile-time reasons. Relax it if we | |
| // can avoid exponential pathological cases. | |
| if (!isa<GEPOperator>(V2)) | |
| return AliasResult::MayAlias; | |
| // If both accesses have unknown size, we can only check whether the base | |
| // objects don't alias. | |
| AliasResult BaseAlias = | |
| AAQI.AAR.alias(MemoryLocation::getBeforeOrAfter(UnderlyingV1), | |
| MemoryLocation::getBeforeOrAfter(UnderlyingV2), AAQI); | |
| return BaseAlias == AliasResult::NoAlias ? AliasResult::NoAlias | |
| : AliasResult::MayAlias; | |
| } | |
| DecomposedGEP DecompGEP1 = DecomposeGEPExpression(GEP1, DL, &AC, DT); | |
| DecomposedGEP DecompGEP2 = DecomposeGEPExpression(V2, DL, &AC, DT); | |
| // Bail if we were not able to decompose anything. | |
| if (DecompGEP1.Base == GEP1 && DecompGEP2.Base == V2) | |
| return AliasResult::MayAlias; | |
| // Subtract the GEP2 pointer from the GEP1 pointer to find out their | |
| // symbolic difference. | |
| subtractDecomposedGEPs(DecompGEP1, DecompGEP2, AAQI); | |
| // If an inbounds GEP would have to start from an out of bounds address | |
| // for the two to alias, then we can assume noalias. | |
| if (*DecompGEP1.InBounds && DecompGEP1.VarIndices.empty() && | |
| V2Size.hasValue() && DecompGEP1.Offset.sge(V2Size.getValue()) && | |
| isBaseOfObject(DecompGEP2.Base)) | |
| return AliasResult::NoAlias; | |
| if (isa<GEPOperator>(V2)) { | |
| // Symmetric case to above. | |
| if (*DecompGEP2.InBounds && DecompGEP1.VarIndices.empty() && | |
| V1Size.hasValue() && DecompGEP1.Offset.sle(-V1Size.getValue()) && | |
| isBaseOfObject(DecompGEP1.Base)) | |
| return AliasResult::NoAlias; | |
| } | |
| // For GEPs with identical offsets, we can preserve the size and AAInfo | |
| // when performing the alias check on the underlying objects. | |
| if (DecompGEP1.Offset == 0 && DecompGEP1.VarIndices.empty()) | |
| return AAQI.AAR.alias(MemoryLocation(DecompGEP1.Base, V1Size), | |
| MemoryLocation(DecompGEP2.Base, V2Size), AAQI); | |
| // Do the base pointers alias? | |
| AliasResult BaseAlias = | |
| AAQI.AAR.alias(MemoryLocation::getBeforeOrAfter(DecompGEP1.Base), | |
| MemoryLocation::getBeforeOrAfter(DecompGEP2.Base), AAQI); | |
| // If we get a No or May, then return it immediately, no amount of analysis | |
| // will improve this situation. | |
| if (BaseAlias != AliasResult::MustAlias) { | |
| assert(BaseAlias == AliasResult::NoAlias || | |
| BaseAlias == AliasResult::MayAlias); | |
| return BaseAlias; | |
| } | |
| // If there is a constant difference between the pointers, but the difference | |
| // is less than the size of the associated memory object, then we know | |
| // that the objects are partially overlapping. If the difference is | |
| // greater, we know they do not overlap. | |
| if (DecompGEP1.VarIndices.empty()) { | |
| APInt &Off = DecompGEP1.Offset; | |
| // Initialize for Off >= 0 (V2 <= GEP1) case. | |
| const Value *LeftPtr = V2; | |
| const Value *RightPtr = GEP1; | |
| LocationSize VLeftSize = V2Size; | |
| LocationSize VRightSize = V1Size; | |
| const bool Swapped = Off.isNegative(); | |
| if (Swapped) { | |
| // Swap if we have the situation where: | |
| // + + | |
| // | BaseOffset | | |
| // ---------------->| | |
| // |-->V1Size |-------> V2Size | |
| // GEP1 V2 | |
| std::swap(LeftPtr, RightPtr); | |
| std::swap(VLeftSize, VRightSize); | |
| Off = -Off; | |
| } | |
| if (!VLeftSize.hasValue()) | |
| return AliasResult::MayAlias; | |
| const uint64_t LSize = VLeftSize.getValue(); | |
| if (Off.ult(LSize)) { | |
| // Conservatively drop processing if a phi was visited and/or offset is | |
| // too big. | |
| AliasResult AR = AliasResult::PartialAlias; | |
| if (VRightSize.hasValue() && Off.ule(INT32_MAX) && | |
| (Off + VRightSize.getValue()).ule(LSize)) { | |
| // Memory referenced by right pointer is nested. Save the offset in | |
| // cache. Note that originally offset estimated as GEP1-V2, but | |
| // AliasResult contains the shift that represents GEP1+Offset=V2. | |
| AR.setOffset(-Off.getSExtValue()); | |
| AR.swap(Swapped); | |
| } | |
| return AR; | |
| } | |
| return AliasResult::NoAlias; | |
| } | |
| // We need to know both acess sizes for all the following heuristics. | |
| if (!V1Size.hasValue() || !V2Size.hasValue()) | |
| return AliasResult::MayAlias; | |
| APInt GCD; | |
| ConstantRange OffsetRange = ConstantRange(DecompGEP1.Offset); | |
| for (unsigned i = 0, e = DecompGEP1.VarIndices.size(); i != e; ++i) { | |
| const VariableGEPIndex &Index = DecompGEP1.VarIndices[i]; | |
| const APInt &Scale = Index.Scale; | |
| APInt ScaleForGCD = Scale; | |
| if (!Index.IsNSW) | |
| ScaleForGCD = APInt::getOneBitSet(Scale.getBitWidth(), | |
| Scale.countTrailingZeros()); | |
| if (i == 0) | |
| GCD = ScaleForGCD.abs(); | |
| else | |
| GCD = APIntOps::GreatestCommonDivisor(GCD, ScaleForGCD.abs()); | |
| ConstantRange CR = computeConstantRange(Index.Val.V, /* ForSigned */ false, | |
| true, &AC, Index.CxtI); | |
| KnownBits Known = | |
| computeKnownBits(Index.Val.V, DL, 0, &AC, Index.CxtI, DT); | |
| CR = CR.intersectWith( | |
| ConstantRange::fromKnownBits(Known, /* Signed */ true), | |
| ConstantRange::Signed); | |
| CR = Index.Val.evaluateWith(CR).sextOrTrunc(OffsetRange.getBitWidth()); | |
| assert(OffsetRange.getBitWidth() == Scale.getBitWidth() && | |
| "Bit widths are normalized to MaxIndexSize"); | |
| if (Index.IsNSW) | |
| OffsetRange = OffsetRange.add(CR.smul_sat(ConstantRange(Scale))); | |
| else | |
| OffsetRange = OffsetRange.add(CR.smul_fast(ConstantRange(Scale))); | |
| } | |
| // We now have accesses at two offsets from the same base: | |
| // 1. (...)*GCD + DecompGEP1.Offset with size V1Size | |
| // 2. 0 with size V2Size | |
| // Using arithmetic modulo GCD, the accesses are at | |
| // [ModOffset..ModOffset+V1Size) and [0..V2Size). If the first access fits | |
| // into the range [V2Size..GCD), then we know they cannot overlap. | |
| APInt ModOffset = DecompGEP1.Offset.srem(GCD); | |
| if (ModOffset.isNegative()) | |
| ModOffset += GCD; // We want mod, not rem. | |
| if (ModOffset.uge(V2Size.getValue()) && | |
| (GCD - ModOffset).uge(V1Size.getValue())) | |
| return AliasResult::NoAlias; | |
| // Compute ranges of potentially accessed bytes for both accesses. If the | |
| // interseciton is empty, there can be no overlap. | |
| unsigned BW = OffsetRange.getBitWidth(); | |
| ConstantRange Range1 = OffsetRange.add( | |
| ConstantRange(APInt(BW, 0), APInt(BW, V1Size.getValue()))); | |
| ConstantRange Range2 = | |
| ConstantRange(APInt(BW, 0), APInt(BW, V2Size.getValue())); | |
| if (Range1.intersectWith(Range2).isEmptySet()) | |
| return AliasResult::NoAlias; | |
| // Try to determine the range of values for VarIndex such that | |
| // VarIndex <= -MinAbsVarIndex || MinAbsVarIndex <= VarIndex. | |
| std::optional<APInt> MinAbsVarIndex; | |
| if (DecompGEP1.VarIndices.size() == 1) { | |
| // VarIndex = Scale*V. | |
| const VariableGEPIndex &Var = DecompGEP1.VarIndices[0]; | |
| if (Var.Val.TruncBits == 0 && | |
| isKnownNonZero(Var.Val.V, DL, 0, &AC, Var.CxtI, DT)) { | |
| // If V != 0, then abs(VarIndex) > 0. | |
| MinAbsVarIndex = APInt(Var.Scale.getBitWidth(), 1); | |
| // Check if abs(V*Scale) >= abs(Scale) holds in the presence of | |
| // potentially wrapping math. | |
| auto MultiplyByScaleNoWrap = [](const VariableGEPIndex &Var) { | |
| if (Var.IsNSW) | |
| return true; | |
| int ValOrigBW = Var.Val.V->getType()->getPrimitiveSizeInBits(); | |
| // If Scale is small enough so that abs(V*Scale) >= abs(Scale) holds. | |
| // The max value of abs(V) is 2^ValOrigBW - 1. Multiplying with a | |
| // constant smaller than 2^(bitwidth(Val) - ValOrigBW) won't wrap. | |
| int MaxScaleValueBW = Var.Val.getBitWidth() - ValOrigBW; | |
| if (MaxScaleValueBW <= 0) | |
| return false; | |
| return Var.Scale.ule( | |
| APInt::getMaxValue(MaxScaleValueBW).zext(Var.Scale.getBitWidth())); | |
| }; | |
| // Refine MinAbsVarIndex, if abs(Scale*V) >= abs(Scale) holds in the | |
| // presence of potentially wrapping math. | |
| if (MultiplyByScaleNoWrap(Var)) { | |
| // If V != 0 then abs(VarIndex) >= abs(Scale). | |
| MinAbsVarIndex = Var.Scale.abs(); | |
| } | |
| } | |
| } else if (DecompGEP1.VarIndices.size() == 2) { | |
| // VarIndex = Scale*V0 + (-Scale)*V1. | |
| // If V0 != V1 then abs(VarIndex) >= abs(Scale). | |
| // Check that MayBeCrossIteration is false, to avoid reasoning about | |
| // inequality of values across loop iterations. | |
| const VariableGEPIndex &Var0 = DecompGEP1.VarIndices[0]; | |
| const VariableGEPIndex &Var1 = DecompGEP1.VarIndices[1]; | |
| if (Var0.Scale == -Var1.Scale && Var0.Val.TruncBits == 0 && | |
| Var0.Val.hasSameCastsAs(Var1.Val) && !AAQI.MayBeCrossIteration && | |
| isKnownNonEqual(Var0.Val.V, Var1.Val.V, DL, &AC, /* CxtI */ nullptr, | |
| DT)) | |
| MinAbsVarIndex = Var0.Scale.abs(); | |
| } | |
| if (MinAbsVarIndex) { | |
| // The constant offset will have added at least +/-MinAbsVarIndex to it. | |
| APInt OffsetLo = DecompGEP1.Offset - *MinAbsVarIndex; | |
| APInt OffsetHi = DecompGEP1.Offset + *MinAbsVarIndex; | |
| // We know that Offset <= OffsetLo || Offset >= OffsetHi | |
| if (OffsetLo.isNegative() && (-OffsetLo).uge(V1Size.getValue()) && | |
| OffsetHi.isNonNegative() && OffsetHi.uge(V2Size.getValue())) | |
| return AliasResult::NoAlias; | |
| } | |
| if (constantOffsetHeuristic(DecompGEP1, V1Size, V2Size, &AC, DT, AAQI)) | |
| return AliasResult::NoAlias; | |
| // Statically, we can see that the base objects are the same, but the | |
| // pointers have dynamic offsets which we can't resolve. And none of our | |
| // little tricks above worked. | |
| return AliasResult::MayAlias; | |
| } | |
| static AliasResult MergeAliasResults(AliasResult A, AliasResult B) { | |
| // If the results agree, take it. | |
| if (A == B) | |
| return A; | |
| // A mix of PartialAlias and MustAlias is PartialAlias. | |
| if ((A == AliasResult::PartialAlias && B == AliasResult::MustAlias) || | |
| (B == AliasResult::PartialAlias && A == AliasResult::MustAlias)) | |
| return AliasResult::PartialAlias; | |
| // Otherwise, we don't know anything. | |
| return AliasResult::MayAlias; | |
| } | |
| /// Provides a bunch of ad-hoc rules to disambiguate a Select instruction | |
| /// against another. | |
| AliasResult | |
| BasicAAResult::aliasSelect(const SelectInst *SI, LocationSize SISize, | |
| const Value *V2, LocationSize V2Size, | |
| AAQueryInfo &AAQI) { | |
| // If the values are Selects with the same condition, we can do a more precise | |
| // check: just check for aliases between the values on corresponding arms. | |
| if (const SelectInst *SI2 = dyn_cast<SelectInst>(V2)) | |
| if (isValueEqualInPotentialCycles(SI->getCondition(), SI2->getCondition(), | |
| AAQI)) { | |
| AliasResult Alias = | |
| AAQI.AAR.alias(MemoryLocation(SI->getTrueValue(), SISize), | |
| MemoryLocation(SI2->getTrueValue(), V2Size), AAQI); | |
| if (Alias == AliasResult::MayAlias) | |
| return AliasResult::MayAlias; | |
| AliasResult ThisAlias = | |
| AAQI.AAR.alias(MemoryLocation(SI->getFalseValue(), SISize), | |
| MemoryLocation(SI2->getFalseValue(), V2Size), AAQI); | |
| return MergeAliasResults(ThisAlias, Alias); | |
| } | |
| // If both arms of the Select node NoAlias or MustAlias V2, then returns | |
| // NoAlias / MustAlias. Otherwise, returns MayAlias. | |
| AliasResult Alias = AAQI.AAR.alias(MemoryLocation(SI->getTrueValue(), SISize), | |
| MemoryLocation(V2, V2Size), AAQI); | |
| if (Alias == AliasResult::MayAlias) | |
| return AliasResult::MayAlias; | |
| AliasResult ThisAlias = | |
| AAQI.AAR.alias(MemoryLocation(SI->getFalseValue(), SISize), | |
| MemoryLocation(V2, V2Size), AAQI); | |
| return MergeAliasResults(ThisAlias, Alias); | |
| } | |
| /// Provide a bunch of ad-hoc rules to disambiguate a PHI instruction against | |
| /// another. | |
| AliasResult BasicAAResult::aliasPHI(const PHINode *PN, LocationSize PNSize, | |
| const Value *V2, LocationSize V2Size, | |
| AAQueryInfo &AAQI) { | |
| if (!PN->getNumIncomingValues()) | |
| return AliasResult::NoAlias; | |
| // If the values are PHIs in the same block, we can do a more precise | |
| // as well as efficient check: just check for aliases between the values | |
| // on corresponding edges. | |
| if (const PHINode *PN2 = dyn_cast<PHINode>(V2)) | |
| if (PN2->getParent() == PN->getParent()) { | |
| std::optional<AliasResult> Alias; | |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) { | |
| AliasResult ThisAlias = AAQI.AAR.alias( | |
| MemoryLocation(PN->getIncomingValue(i), PNSize), | |
| MemoryLocation( | |
| PN2->getIncomingValueForBlock(PN->getIncomingBlock(i)), V2Size), | |
| AAQI); | |
| if (Alias) | |
| *Alias = MergeAliasResults(*Alias, ThisAlias); | |
| else | |
| Alias = ThisAlias; | |
| if (*Alias == AliasResult::MayAlias) | |
| break; | |
| } | |
| return *Alias; | |
| } | |
| SmallVector<Value *, 4> V1Srcs; | |
| // If a phi operand recurses back to the phi, we can still determine NoAlias | |
| // if we don't alias the underlying objects of the other phi operands, as we | |
| // know that the recursive phi needs to be based on them in some way. | |
| bool isRecursive = false; | |
| auto CheckForRecPhi = [&](Value *PV) { | |
| if (!EnableRecPhiAnalysis) | |
| return false; | |
| if (getUnderlyingObject(PV) == PN) { | |
| isRecursive = true; | |
| return true; | |
| } | |
| return false; | |
| }; | |
| SmallPtrSet<Value *, 4> UniqueSrc; | |
| Value *OnePhi = nullptr; | |
| for (Value *PV1 : PN->incoming_values()) { | |
| // Skip the phi itself being the incoming value. | |
| if (PV1 == PN) | |
| continue; | |
| if (isa<PHINode>(PV1)) { | |
| if (OnePhi && OnePhi != PV1) { | |
| // To control potential compile time explosion, we choose to be | |
| // conserviate when we have more than one Phi input. It is important | |
| // that we handle the single phi case as that lets us handle LCSSA | |
| // phi nodes and (combined with the recursive phi handling) simple | |
| // pointer induction variable patterns. | |
| return AliasResult::MayAlias; | |
| } | |
| OnePhi = PV1; | |
| } | |
| if (CheckForRecPhi(PV1)) | |
| continue; | |
| if (UniqueSrc.insert(PV1).second) | |
| V1Srcs.push_back(PV1); | |
| } | |
| if (OnePhi && UniqueSrc.size() > 1) | |
| // Out of an abundance of caution, allow only the trivial lcssa and | |
| // recursive phi cases. | |
| return AliasResult::MayAlias; | |
| // If V1Srcs is empty then that means that the phi has no underlying non-phi | |
| // value. This should only be possible in blocks unreachable from the entry | |
| // block, but return MayAlias just in case. | |
| if (V1Srcs.empty()) | |
| return AliasResult::MayAlias; | |
| // If this PHI node is recursive, indicate that the pointer may be moved | |
| // across iterations. We can only prove NoAlias if different underlying | |
| // objects are involved. | |
| if (isRecursive) | |
| PNSize = LocationSize::beforeOrAfterPointer(); | |
| // In the recursive alias queries below, we may compare values from two | |
| // different loop iterations. | |
| SaveAndRestore SavedMayBeCrossIteration(AAQI.MayBeCrossIteration, true); | |
| AliasResult Alias = AAQI.AAR.alias(MemoryLocation(V1Srcs[0], PNSize), | |
| MemoryLocation(V2, V2Size), AAQI); | |
| // Early exit if the check of the first PHI source against V2 is MayAlias. | |
| // Other results are not possible. | |
| if (Alias == AliasResult::MayAlias) | |
| return AliasResult::MayAlias; | |
| // With recursive phis we cannot guarantee that MustAlias/PartialAlias will | |
| // remain valid to all elements and needs to conservatively return MayAlias. | |
| if (isRecursive && Alias != AliasResult::NoAlias) | |
| return AliasResult::MayAlias; | |
| // If all sources of the PHI node NoAlias or MustAlias V2, then returns | |
| // NoAlias / MustAlias. Otherwise, returns MayAlias. | |
| for (unsigned i = 1, e = V1Srcs.size(); i != e; ++i) { | |
| Value *V = V1Srcs[i]; | |
| AliasResult ThisAlias = AAQI.AAR.alias( | |
| MemoryLocation(V, PNSize), MemoryLocation(V2, V2Size), AAQI); | |
| Alias = MergeAliasResults(ThisAlias, Alias); | |
| if (Alias == AliasResult::MayAlias) | |
| break; | |
| } | |
| return Alias; | |
| } | |
| /// Provides a bunch of ad-hoc rules to disambiguate in common cases, such as | |
| /// array references. | |
| AliasResult BasicAAResult::aliasCheck(const Value *V1, LocationSize V1Size, | |
| const Value *V2, LocationSize V2Size, | |
| AAQueryInfo &AAQI, | |
| const Instruction *CtxI) { | |
| // If either of the memory references is empty, it doesn't matter what the | |
| // pointer values are. | |
| if (V1Size.isZero() || V2Size.isZero()) | |
| return AliasResult::NoAlias; | |
| // Strip off any casts if they exist. | |
| V1 = V1->stripPointerCastsForAliasAnalysis(); | |
| V2 = V2->stripPointerCastsForAliasAnalysis(); | |
| // If V1 or V2 is undef, the result is NoAlias because we can always pick a | |
| // value for undef that aliases nothing in the program. | |
| if (isa<UndefValue>(V1) || isa<UndefValue>(V2)) | |
| return AliasResult::NoAlias; | |
| // Are we checking for alias of the same value? | |
| // Because we look 'through' phi nodes, we could look at "Value" pointers from | |
| // different iterations. We must therefore make sure that this is not the | |
| // case. The function isValueEqualInPotentialCycles ensures that this cannot | |
| // happen by looking at the visited phi nodes and making sure they cannot | |
| // reach the value. | |
| if (isValueEqualInPotentialCycles(V1, V2, AAQI)) | |
| return AliasResult::MustAlias; | |
| if (!V1->getType()->isPointerTy() || !V2->getType()->isPointerTy()) | |
| return AliasResult::NoAlias; // Scalars cannot alias each other | |
| // Figure out what objects these things are pointing to if we can. | |
| const Value *O1 = getUnderlyingObject(V1, MaxLookupSearchDepth); | |
| const Value *O2 = getUnderlyingObject(V2, MaxLookupSearchDepth); | |
| // Null values in the default address space don't point to any object, so they | |
| // don't alias any other pointer. | |
| if (const ConstantPointerNull *CPN = dyn_cast<ConstantPointerNull>(O1)) | |
| if (!NullPointerIsDefined(&F, CPN->getType()->getAddressSpace())) | |
| return AliasResult::NoAlias; | |
| if (const ConstantPointerNull *CPN = dyn_cast<ConstantPointerNull>(O2)) | |
| if (!NullPointerIsDefined(&F, CPN->getType()->getAddressSpace())) | |
| return AliasResult::NoAlias; | |
| if (O1 != O2) { | |
| // If V1/V2 point to two different objects, we know that we have no alias. | |
| if (isIdentifiedObject(O1) && isIdentifiedObject(O2)) | |
| return AliasResult::NoAlias; | |
| // Constant pointers can't alias with non-const isIdentifiedObject objects. | |
| if ((isa<Constant>(O1) && isIdentifiedObject(O2) && !isa<Constant>(O2)) || | |
| (isa<Constant>(O2) && isIdentifiedObject(O1) && !isa<Constant>(O1))) | |
| return AliasResult::NoAlias; | |
| // Function arguments can't alias with things that are known to be | |
| // unambigously identified at the function level. | |
| if ((isa<Argument>(O1) && isIdentifiedFunctionLocal(O2)) || | |
| (isa<Argument>(O2) && isIdentifiedFunctionLocal(O1))) | |
| return AliasResult::NoAlias; | |
| // If one pointer is the result of a call/invoke or load and the other is a | |
| // non-escaping local object within the same function, then we know the | |
| // object couldn't escape to a point where the call could return it. | |
| // | |
| // Note that if the pointers are in different functions, there are a | |
| // variety of complications. A call with a nocapture argument may still | |
| // temporary store the nocapture argument's value in a temporary memory | |
| // location if that memory location doesn't escape. Or it may pass a | |
| // nocapture value to other functions as long as they don't capture it. | |
| if (isEscapeSource(O1) && | |
| AAQI.CI->isNotCapturedBeforeOrAt(O2, cast<Instruction>(O1))) | |
| return AliasResult::NoAlias; | |
| if (isEscapeSource(O2) && | |
| AAQI.CI->isNotCapturedBeforeOrAt(O1, cast<Instruction>(O2))) | |
| return AliasResult::NoAlias; | |
| } | |
| // If the size of one access is larger than the entire object on the other | |
| // side, then we know such behavior is undefined and can assume no alias. | |
| bool NullIsValidLocation = NullPointerIsDefined(&F); | |
| if ((isObjectSmallerThan( | |
| O2, getMinimalExtentFrom(*V1, V1Size, DL, NullIsValidLocation), DL, | |
| TLI, NullIsValidLocation)) || | |
| (isObjectSmallerThan( | |
| O1, getMinimalExtentFrom(*V2, V2Size, DL, NullIsValidLocation), DL, | |
| TLI, NullIsValidLocation))) | |
| return AliasResult::NoAlias; | |
| if (CtxI && EnableSeparateStorageAnalysis) { | |
| for (auto &AssumeVH : AC.assumptions()) { | |
| if (!AssumeVH) | |
| continue; | |
| AssumeInst *Assume = cast<AssumeInst>(AssumeVH); | |
| for (unsigned Idx = 0; Idx < Assume->getNumOperandBundles(); Idx++) { | |
| OperandBundleUse OBU = Assume->getOperandBundleAt(Idx); | |
| if (OBU.getTagName() == "separate_storage") { | |
| assert(OBU.Inputs.size() == 2); | |
| const Value *Hint1 = OBU.Inputs[0].get(); | |
| const Value *Hint2 = OBU.Inputs[1].get(); | |
| const Value *HintO1 = getUnderlyingObject(Hint1); | |
| const Value *HintO2 = getUnderlyingObject(Hint2); | |
| if (((O1 == HintO1 && O2 == HintO2) || | |
| (O1 == HintO2 && O2 == HintO1)) && | |
| isValidAssumeForContext(Assume, CtxI, DT)) | |
| return AliasResult::NoAlias; | |
| } | |
| } | |
| } | |
| } | |
| // If one the accesses may be before the accessed pointer, canonicalize this | |
| // by using unknown after-pointer sizes for both accesses. This is | |
| // equivalent, because regardless of which pointer is lower, one of them | |
| // will always came after the other, as long as the underlying objects aren't | |
| // disjoint. We do this so that the rest of BasicAA does not have to deal | |
| // with accesses before the base pointer, and to improve cache utilization by | |
| // merging equivalent states. | |
| if (V1Size.mayBeBeforePointer() || V2Size.mayBeBeforePointer()) { | |
| V1Size = LocationSize::afterPointer(); | |
| V2Size = LocationSize::afterPointer(); | |
| } | |
| // FIXME: If this depth limit is hit, then we may cache sub-optimal results | |
| // for recursive queries. For this reason, this limit is chosen to be large | |
| // enough to be very rarely hit, while still being small enough to avoid | |
| // stack overflows. | |
| if (AAQI.Depth >= 512) | |
| return AliasResult::MayAlias; | |
| // Check the cache before climbing up use-def chains. This also terminates | |
| // otherwise infinitely recursive queries. Include MayBeCrossIteration in the | |
| // cache key, because some cases where MayBeCrossIteration==false returns | |
| // MustAlias or NoAlias may become MayAlias under MayBeCrossIteration==true. | |
| AAQueryInfo::LocPair Locs({V1, V1Size, AAQI.MayBeCrossIteration}, | |
| {V2, V2Size, AAQI.MayBeCrossIteration}); | |
| const bool Swapped = V1 > V2; | |
| if (Swapped) | |
| std::swap(Locs.first, Locs.second); | |
| const auto &Pair = AAQI.AliasCache.try_emplace( | |
| Locs, AAQueryInfo::CacheEntry{AliasResult::NoAlias, 0}); | |
| if (!Pair.second) { | |
| auto &Entry = Pair.first->second; | |
| if (!Entry.isDefinitive()) { | |
| // Remember that we used an assumption. | |
| ++Entry.NumAssumptionUses; | |
| ++AAQI.NumAssumptionUses; | |
| } | |
| // Cache contains sorted {V1,V2} pairs but we should return original order. | |
| auto Result = Entry.Result; | |
| Result.swap(Swapped); | |
| return Result; | |
| } | |
| int OrigNumAssumptionUses = AAQI.NumAssumptionUses; | |
| unsigned OrigNumAssumptionBasedResults = AAQI.AssumptionBasedResults.size(); | |
| AliasResult Result = | |
| aliasCheckRecursive(V1, V1Size, V2, V2Size, AAQI, O1, O2); | |
| auto It = AAQI.AliasCache.find(Locs); | |
| assert(It != AAQI.AliasCache.end() && "Must be in cache"); | |
| auto &Entry = It->second; | |
| // Check whether a NoAlias assumption has been used, but disproven. | |
| bool AssumptionDisproven = | |
| Entry.NumAssumptionUses > 0 && Result != AliasResult::NoAlias; | |
| if (AssumptionDisproven) | |
| Result = AliasResult::MayAlias; | |
| // This is a definitive result now, when considered as a root query. | |
| AAQI.NumAssumptionUses -= Entry.NumAssumptionUses; | |
| Entry.Result = Result; | |
| // Cache contains sorted {V1,V2} pairs. | |
| Entry.Result.swap(Swapped); | |
| Entry.NumAssumptionUses = -1; | |
| // If the assumption has been disproven, remove any results that may have | |
| // been based on this assumption. Do this after the Entry updates above to | |
| // avoid iterator invalidation. | |
| if (AssumptionDisproven) | |
| while (AAQI.AssumptionBasedResults.size() > OrigNumAssumptionBasedResults) | |
| AAQI.AliasCache.erase(AAQI.AssumptionBasedResults.pop_back_val()); | |
| // The result may still be based on assumptions higher up in the chain. | |
| // Remember it, so it can be purged from the cache later. | |
| if (OrigNumAssumptionUses != AAQI.NumAssumptionUses && | |
| Result != AliasResult::MayAlias) | |
| AAQI.AssumptionBasedResults.push_back(Locs); | |
| return Result; | |
| } | |
| AliasResult BasicAAResult::aliasCheckRecursive( | |
| const Value *V1, LocationSize V1Size, | |
| const Value *V2, LocationSize V2Size, | |
| AAQueryInfo &AAQI, const Value *O1, const Value *O2) { | |
| if (const GEPOperator *GV1 = dyn_cast<GEPOperator>(V1)) { | |
| AliasResult Result = aliasGEP(GV1, V1Size, V2, V2Size, O1, O2, AAQI); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } else if (const GEPOperator *GV2 = dyn_cast<GEPOperator>(V2)) { | |
| AliasResult Result = aliasGEP(GV2, V2Size, V1, V1Size, O2, O1, AAQI); | |
| Result.swap(); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } | |
| if (const PHINode *PN = dyn_cast<PHINode>(V1)) { | |
| AliasResult Result = aliasPHI(PN, V1Size, V2, V2Size, AAQI); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } else if (const PHINode *PN = dyn_cast<PHINode>(V2)) { | |
| AliasResult Result = aliasPHI(PN, V2Size, V1, V1Size, AAQI); | |
| Result.swap(); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } | |
| if (const SelectInst *S1 = dyn_cast<SelectInst>(V1)) { | |
| AliasResult Result = aliasSelect(S1, V1Size, V2, V2Size, AAQI); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } else if (const SelectInst *S2 = dyn_cast<SelectInst>(V2)) { | |
| AliasResult Result = aliasSelect(S2, V2Size, V1, V1Size, AAQI); | |
| Result.swap(); | |
| if (Result != AliasResult::MayAlias) | |
| return Result; | |
| } | |
| // If both pointers are pointing into the same object and one of them | |
| // accesses the entire object, then the accesses must overlap in some way. | |
| if (O1 == O2) { | |
| bool NullIsValidLocation = NullPointerIsDefined(&F); | |
| if (V1Size.isPrecise() && V2Size.isPrecise() && | |
| (isObjectSize(O1, V1Size.getValue(), DL, TLI, NullIsValidLocation) || | |
| isObjectSize(O2, V2Size.getValue(), DL, TLI, NullIsValidLocation))) | |
| return AliasResult::PartialAlias; | |
| } | |
| return AliasResult::MayAlias; | |
| } | |
| /// Check whether two Values can be considered equivalent. | |
| /// | |
| /// If the values may come from different cycle iterations, this will also | |
| /// check that the values are not part of cycle. We have to do this because we | |
| /// are looking through phi nodes, that is we say | |
| /// noalias(V, phi(VA, VB)) if noalias(V, VA) and noalias(V, VB). | |
| bool BasicAAResult::isValueEqualInPotentialCycles(const Value *V, | |
| const Value *V2, | |
| const AAQueryInfo &AAQI) { | |
| if (V != V2) | |
| return false; | |
| if (!AAQI.MayBeCrossIteration) | |
| return true; | |
| // Non-instructions and instructions in the entry block cannot be part of | |
| // a loop. | |
| const Instruction *Inst = dyn_cast<Instruction>(V); | |
| if (!Inst || Inst->getParent()->isEntryBlock()) | |
| return true; | |
| // Check whether the instruction is part of a cycle, by checking whether the | |
| // block can (non-trivially) reach itself. | |
| BasicBlock *BB = const_cast<BasicBlock *>(Inst->getParent()); | |
| SmallVector<BasicBlock *> Succs(successors(BB)); | |
| return !Succs.empty() && | |
| !isPotentiallyReachableFromMany(Succs, BB, nullptr, DT); | |
| } | |
| /// Computes the symbolic difference between two de-composed GEPs. | |
| void BasicAAResult::subtractDecomposedGEPs(DecomposedGEP &DestGEP, | |
| const DecomposedGEP &SrcGEP, | |
| const AAQueryInfo &AAQI) { | |
| DestGEP.Offset -= SrcGEP.Offset; | |
| for (const VariableGEPIndex &Src : SrcGEP.VarIndices) { | |
| // Find V in Dest. This is N^2, but pointer indices almost never have more | |
| // than a few variable indexes. | |
| bool Found = false; | |
| for (auto I : enumerate(DestGEP.VarIndices)) { | |
| VariableGEPIndex &Dest = I.value(); | |
| if (!isValueEqualInPotentialCycles(Dest.Val.V, Src.Val.V, AAQI) || | |
| !Dest.Val.hasSameCastsAs(Src.Val)) | |
| continue; | |
| // If we found it, subtract off Scale V's from the entry in Dest. If it | |
| // goes to zero, remove the entry. | |
| if (Dest.Scale != Src.Scale) { | |
| Dest.Scale -= Src.Scale; | |
| Dest.IsNSW = false; | |
| } else { | |
| DestGEP.VarIndices.erase(DestGEP.VarIndices.begin() + I.index()); | |
| } | |
| Found = true; | |
| break; | |
| } | |
| // If we didn't consume this entry, add it to the end of the Dest list. | |
| if (!Found) { | |
| VariableGEPIndex Entry = {Src.Val, -Src.Scale, Src.CxtI, Src.IsNSW}; | |
| DestGEP.VarIndices.push_back(Entry); | |
| } | |
| } | |
| } | |
| bool BasicAAResult::constantOffsetHeuristic(const DecomposedGEP &GEP, | |
| LocationSize MaybeV1Size, | |
| LocationSize MaybeV2Size, | |
| AssumptionCache *AC, | |
| DominatorTree *DT, | |
| const AAQueryInfo &AAQI) { | |
| if (GEP.VarIndices.size() != 2 || !MaybeV1Size.hasValue() || | |
| !MaybeV2Size.hasValue()) | |
| return false; | |
| const uint64_t V1Size = MaybeV1Size.getValue(); | |
| const uint64_t V2Size = MaybeV2Size.getValue(); | |
| const VariableGEPIndex &Var0 = GEP.VarIndices[0], &Var1 = GEP.VarIndices[1]; | |
| if (Var0.Val.TruncBits != 0 || !Var0.Val.hasSameCastsAs(Var1.Val) || | |
| Var0.Scale != -Var1.Scale || | |
| Var0.Val.V->getType() != Var1.Val.V->getType()) | |
| return false; | |
| // We'll strip off the Extensions of Var0 and Var1 and do another round | |
| // of GetLinearExpression decomposition. In the example above, if Var0 | |
| // is zext(%x + 1) we should get V1 == %x and V1Offset == 1. | |
| LinearExpression E0 = | |
| GetLinearExpression(CastedValue(Var0.Val.V), DL, 0, AC, DT); | |
| LinearExpression E1 = | |
| GetLinearExpression(CastedValue(Var1.Val.V), DL, 0, AC, DT); | |
| if (E0.Scale != E1.Scale || !E0.Val.hasSameCastsAs(E1.Val) || | |
| !isValueEqualInPotentialCycles(E0.Val.V, E1.Val.V, AAQI)) | |
| return false; | |
| // We have a hit - Var0 and Var1 only differ by a constant offset! | |
| // If we've been sext'ed then zext'd the maximum difference between Var0 and | |
| // Var1 is possible to calculate, but we're just interested in the absolute | |
| // minimum difference between the two. The minimum distance may occur due to | |
| // wrapping; consider "add i3 %i, 5": if %i == 7 then 7 + 5 mod 8 == 4, and so | |
| // the minimum distance between %i and %i + 5 is 3. | |
| APInt MinDiff = E0.Offset - E1.Offset, Wrapped = -MinDiff; | |
| MinDiff = APIntOps::umin(MinDiff, Wrapped); | |
| APInt MinDiffBytes = | |
| MinDiff.zextOrTrunc(Var0.Scale.getBitWidth()) * Var0.Scale.abs(); | |
| // We can't definitely say whether GEP1 is before or after V2 due to wrapping | |
| // arithmetic (i.e. for some values of GEP1 and V2 GEP1 < V2, and for other | |
| // values GEP1 > V2). We'll therefore only declare NoAlias if both V1Size and | |
| // V2Size can fit in the MinDiffBytes gap. | |
| return MinDiffBytes.uge(V1Size + GEP.Offset.abs()) && | |
| MinDiffBytes.uge(V2Size + GEP.Offset.abs()); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // BasicAliasAnalysis Pass | |
| //===----------------------------------------------------------------------===// | |
| AnalysisKey BasicAA::Key; | |
| BasicAAResult BasicAA::run(Function &F, FunctionAnalysisManager &AM) { | |
| auto &TLI = AM.getResult<TargetLibraryAnalysis>(F); | |
| auto &AC = AM.getResult<AssumptionAnalysis>(F); | |
| auto *DT = &AM.getResult<DominatorTreeAnalysis>(F); | |
| return BasicAAResult(F.getParent()->getDataLayout(), F, TLI, AC, DT); | |
| } | |
| BasicAAWrapperPass::BasicAAWrapperPass() : FunctionPass(ID) { | |
| initializeBasicAAWrapperPassPass(*PassRegistry::getPassRegistry()); | |
| } | |
| char BasicAAWrapperPass::ID = 0; | |
| void BasicAAWrapperPass::anchor() {} | |
| INITIALIZE_PASS_BEGIN(BasicAAWrapperPass, "basic-aa", | |
| "Basic Alias Analysis (stateless AA impl)", true, true) | |
| INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker) | |
| INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfoWrapperPass) | |
| INITIALIZE_PASS_END(BasicAAWrapperPass, "basic-aa", | |
| "Basic Alias Analysis (stateless AA impl)", true, true) | |
| FunctionPass *llvm::createBasicAAWrapperPass() { | |
| return new BasicAAWrapperPass(); | |
| } | |
| bool BasicAAWrapperPass::runOnFunction(Function &F) { | |
| auto &ACT = getAnalysis<AssumptionCacheTracker>(); | |
| auto &TLIWP = getAnalysis<TargetLibraryInfoWrapperPass>(); | |
| auto &DTWP = getAnalysis<DominatorTreeWrapperPass>(); | |
| Result.reset(new BasicAAResult(F.getParent()->getDataLayout(), F, | |
| TLIWP.getTLI(F), ACT.getAssumptionCache(F), | |
| &DTWP.getDomTree())); | |
| return false; | |
| } | |
| void BasicAAWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.setPreservesAll(); | |
| AU.addRequiredTransitive<AssumptionCacheTracker>(); | |
| AU.addRequiredTransitive<DominatorTreeWrapperPass>(); | |
| AU.addRequiredTransitive<TargetLibraryInfoWrapperPass>(); | |
| } | |
| BasicAAResult llvm::createLegacyPMBasicAAResult(Pass &P, Function &F) { | |
| return BasicAAResult( | |
| F.getParent()->getDataLayout(), F, | |
| P.getAnalysis<TargetLibraryInfoWrapperPass>().getTLI(F), | |
| P.getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F)); | |
| } |