| //===- HexagonGenInsert.cpp -----------------------------------------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "BitTracker.h" | |
| #include "HexagonBitTracker.h" | |
| #include "HexagonInstrInfo.h" | |
| #include "HexagonRegisterInfo.h" | |
| #include "HexagonSubtarget.h" | |
| #include "llvm/ADT/BitVector.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/GraphTraits.h" | |
| #include "llvm/ADT/PostOrderIterator.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/CodeGen/MachineBasicBlock.h" | |
| #include "llvm/CodeGen/MachineDominators.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineFunctionPass.h" | |
| #include "llvm/CodeGen/MachineInstr.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineOperand.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/TargetRegisterInfo.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/MathExtras.h" | |
| #include "llvm/Support/Timer.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <cstdint> | |
| #include <iterator> | |
| #include <utility> | |
| #include <vector> | |
| #define DEBUG_TYPE "hexinsert" | |
| using namespace llvm; | |
| static cl::opt<unsigned> VRegIndexCutoff("insert-vreg-cutoff", cl::init(~0U), | |
| cl::Hidden, cl::ZeroOrMore, cl::desc("Vreg# cutoff for insert generation.")); | |
| // The distance cutoff is selected based on the precheckin-perf results: | |
| // cutoffs 20, 25, 35, and 40 are worse than 30. | |
| static cl::opt<unsigned> VRegDistCutoff("insert-dist-cutoff", cl::init(30U), | |
| cl::Hidden, cl::ZeroOrMore, cl::desc("Vreg distance cutoff for insert " | |
| "generation.")); | |
| // Limit the container sizes for extreme cases where we run out of memory. | |
| static cl::opt<unsigned> MaxORLSize("insert-max-orl", cl::init(4096), | |
| cl::Hidden, cl::ZeroOrMore, cl::desc("Maximum size of OrderedRegisterList")); | |
| static cl::opt<unsigned> MaxIFMSize("insert-max-ifmap", cl::init(1024), | |
| cl::Hidden, cl::ZeroOrMore, cl::desc("Maximum size of IFMap")); | |
| static cl::opt<bool> OptTiming("insert-timing", cl::init(false), cl::Hidden, | |
| cl::ZeroOrMore, cl::desc("Enable timing of insert generation")); | |
| static cl::opt<bool> OptTimingDetail("insert-timing-detail", cl::init(false), | |
| cl::Hidden, cl::ZeroOrMore, cl::desc("Enable detailed timing of insert " | |
| "generation")); | |
| static cl::opt<bool> OptSelectAll0("insert-all0", cl::init(false), cl::Hidden, | |
| cl::ZeroOrMore); | |
| static cl::opt<bool> OptSelectHas0("insert-has0", cl::init(false), cl::Hidden, | |
| cl::ZeroOrMore); | |
| // Whether to construct constant values via "insert". Could eliminate constant | |
| // extenders, but often not practical. | |
| static cl::opt<bool> OptConst("insert-const", cl::init(false), cl::Hidden, | |
| cl::ZeroOrMore); | |
| // The preprocessor gets confused when the DEBUG macro is passed larger | |
| // chunks of code. Use this function to detect debugging. | |
| inline static bool isDebug() { | |
| #ifndef NDEBUG | |
| return DebugFlag && isCurrentDebugType(DEBUG_TYPE); | |
| #else | |
| return false; | |
| #endif | |
| } | |
| namespace { | |
| // Set of virtual registers, based on BitVector. | |
| struct RegisterSet : private BitVector { | |
| RegisterSet() = default; | |
| explicit RegisterSet(unsigned s, bool t = false) : BitVector(s, t) {} | |
| RegisterSet(const RegisterSet &RS) : BitVector(RS) {} | |
| RegisterSet &operator=(const RegisterSet &RS) { | |
| BitVector::operator=(RS); | |
| return *this; | |
| } | |
| using BitVector::clear; | |
| unsigned find_first() const { | |
| int First = BitVector::find_first(); | |
| if (First < 0) | |
| return 0; | |
| return x2v(First); | |
| } | |
| unsigned find_next(unsigned Prev) const { | |
| int Next = BitVector::find_next(v2x(Prev)); | |
| if (Next < 0) | |
| return 0; | |
| return x2v(Next); | |
| } | |
| RegisterSet &insert(unsigned R) { | |
| unsigned Idx = v2x(R); | |
| ensure(Idx); | |
| return static_cast<RegisterSet&>(BitVector::set(Idx)); | |
| } | |
| RegisterSet &remove(unsigned R) { | |
| unsigned Idx = v2x(R); | |
| if (Idx >= size()) | |
| return *this; | |
| return static_cast<RegisterSet&>(BitVector::reset(Idx)); | |
| } | |
| RegisterSet &insert(const RegisterSet &Rs) { | |
| return static_cast<RegisterSet&>(BitVector::operator|=(Rs)); | |
| } | |
| RegisterSet &remove(const RegisterSet &Rs) { | |
| return static_cast<RegisterSet&>(BitVector::reset(Rs)); | |
| } | |
| reference operator[](unsigned R) { | |
| unsigned Idx = v2x(R); | |
| ensure(Idx); | |
| return BitVector::operator[](Idx); | |
| } | |
| bool operator[](unsigned R) const { | |
| unsigned Idx = v2x(R); | |
| assert(Idx < size()); | |
| return BitVector::operator[](Idx); | |
| } | |
| bool has(unsigned R) const { | |
| unsigned Idx = v2x(R); | |
| if (Idx >= size()) | |
| return false; | |
| return BitVector::test(Idx); | |
| } | |
| bool empty() const { | |
| return !BitVector::any(); | |
| } | |
| bool includes(const RegisterSet &Rs) const { | |
| // A.BitVector::test(B) <=> A-B != {} | |
| return !Rs.BitVector::test(*this); | |
| } | |
| bool intersects(const RegisterSet &Rs) const { | |
| return BitVector::anyCommon(Rs); | |
| } | |
| private: | |
| void ensure(unsigned Idx) { | |
| if (size() <= Idx) | |
| resize(std::max(Idx+1, 32U)); | |
| } | |
| static inline unsigned v2x(unsigned v) { | |
| return Register::virtReg2Index(v); | |
| } | |
| static inline unsigned x2v(unsigned x) { | |
| return Register::index2VirtReg(x); | |
| } | |
| }; | |
| struct PrintRegSet { | |
| PrintRegSet(const RegisterSet &S, const TargetRegisterInfo *RI) | |
| : RS(S), TRI(RI) {} | |
| friend raw_ostream &operator<< (raw_ostream &OS, | |
| const PrintRegSet &P); | |
| private: | |
| const RegisterSet &RS; | |
| const TargetRegisterInfo *TRI; | |
| }; | |
| raw_ostream &operator<< (raw_ostream &OS, const PrintRegSet &P) { | |
| OS << '{'; | |
| for (unsigned R = P.RS.find_first(); R; R = P.RS.find_next(R)) | |
| OS << ' ' << printReg(R, P.TRI); | |
| OS << " }"; | |
| return OS; | |
| } | |
| // A convenience class to associate unsigned numbers (such as virtual | |
| // registers) with unsigned numbers. | |
| struct UnsignedMap : public DenseMap<unsigned,unsigned> { | |
| UnsignedMap() = default; | |
| private: | |
| using BaseType = DenseMap<unsigned, unsigned>; | |
| }; | |
| // A utility to establish an ordering between virtual registers: | |
| // VRegA < VRegB <=> RegisterOrdering[VRegA] < RegisterOrdering[VRegB] | |
| // This is meant as a cache for the ordering of virtual registers defined | |
| // by a potentially expensive comparison function, or obtained by a proce- | |
| // dure that should not be repeated each time two registers are compared. | |
| struct RegisterOrdering : public UnsignedMap { | |
| RegisterOrdering() = default; | |
| unsigned operator[](unsigned VR) const { | |
| const_iterator F = find(VR); | |
| assert(F != end()); | |
| return F->second; | |
| } | |
| // Add operator(), so that objects of this class can be used as | |
| // comparators in std::sort et al. | |
| bool operator() (unsigned VR1, unsigned VR2) const { | |
| return operator[](VR1) < operator[](VR2); | |
| } | |
| }; | |
| // Ordering of bit values. This class does not have operator[], but | |
| // is supplies a comparison operator() for use in std:: algorithms. | |
| // The order is as follows: | |
| // - 0 < 1 < ref | |
| // - ref1 < ref2, if ord(ref1.Reg) < ord(ref2.Reg), | |
| // or ord(ref1.Reg) == ord(ref2.Reg), and ref1.Pos < ref2.Pos. | |
| struct BitValueOrdering { | |
| BitValueOrdering(const RegisterOrdering &RB) : BaseOrd(RB) {} | |
| bool operator() (const BitTracker::BitValue &V1, | |
| const BitTracker::BitValue &V2) const; | |
| const RegisterOrdering &BaseOrd; | |
| }; | |
| } // end anonymous namespace | |
| bool BitValueOrdering::operator() (const BitTracker::BitValue &V1, | |
| const BitTracker::BitValue &V2) const { | |
| if (V1 == V2) | |
| return false; | |
| // V1==0 => true, V2==0 => false | |
| if (V1.is(0) || V2.is(0)) | |
| return V1.is(0); | |
| // Neither of V1,V2 is 0, and V1!=V2. | |
| // V2==1 => false, V1==1 => true | |
| if (V2.is(1) || V1.is(1)) | |
| return !V2.is(1); | |
| // Both V1,V2 are refs. | |
| unsigned Ind1 = BaseOrd[V1.RefI.Reg], Ind2 = BaseOrd[V2.RefI.Reg]; | |
| if (Ind1 != Ind2) | |
| return Ind1 < Ind2; | |
| // If V1.Pos==V2.Pos | |
| assert(V1.RefI.Pos != V2.RefI.Pos && "Bit values should be different"); | |
| return V1.RefI.Pos < V2.RefI.Pos; | |
| } | |
| namespace { | |
| // Cache for the BitTracker's cell map. Map lookup has a logarithmic | |
| // complexity, this class will memoize the lookup results to reduce | |
| // the access time for repeated lookups of the same cell. | |
| struct CellMapShadow { | |
| CellMapShadow(const BitTracker &T) : BT(T) {} | |
| const BitTracker::RegisterCell &lookup(unsigned VR) { | |
| unsigned RInd = Register::virtReg2Index(VR); | |
| // Grow the vector to at least 32 elements. | |
| if (RInd >= CVect.size()) | |
| CVect.resize(std::max(RInd+16, 32U), nullptr); | |
| const BitTracker::RegisterCell *CP = CVect[RInd]; | |
| if (CP == nullptr) | |
| CP = CVect[RInd] = &BT.lookup(VR); | |
| return *CP; | |
| } | |
| const BitTracker &BT; | |
| private: | |
| using CellVectType = std::vector<const BitTracker::RegisterCell *>; | |
| CellVectType CVect; | |
| }; | |
| // Comparator class for lexicographic ordering of virtual registers | |
| // according to the corresponding BitTracker::RegisterCell objects. | |
| struct RegisterCellLexCompare { | |
| RegisterCellLexCompare(const BitValueOrdering &BO, CellMapShadow &M) | |
| : BitOrd(BO), CM(M) {} | |
| bool operator() (unsigned VR1, unsigned VR2) const; | |
| private: | |
| const BitValueOrdering &BitOrd; | |
| CellMapShadow &CM; | |
| }; | |
| // Comparator class for lexicographic ordering of virtual registers | |
| // according to the specified bits of the corresponding BitTracker:: | |
| // RegisterCell objects. | |
| // Specifically, this class will be used to compare bit B of a register | |
| // cell for a selected virtual register R with bit N of any register | |
| // other than R. | |
| struct RegisterCellBitCompareSel { | |
| RegisterCellBitCompareSel(unsigned R, unsigned B, unsigned N, | |
| const BitValueOrdering &BO, CellMapShadow &M) | |
| : SelR(R), SelB(B), BitN(N), BitOrd(BO), CM(M) {} | |
| bool operator() (unsigned VR1, unsigned VR2) const; | |
| private: | |
| const unsigned SelR, SelB; | |
| const unsigned BitN; | |
| const BitValueOrdering &BitOrd; | |
| CellMapShadow &CM; | |
| }; | |
| } // end anonymous namespace | |
| bool RegisterCellLexCompare::operator() (unsigned VR1, unsigned VR2) const { | |
| // Ordering of registers, made up from two given orderings: | |
| // - the ordering of the register numbers, and | |
| // - the ordering of register cells. | |
| // Def. R1 < R2 if: | |
| // - cell(R1) < cell(R2), or | |
| // - cell(R1) == cell(R2), and index(R1) < index(R2). | |
| // | |
| // For register cells, the ordering is lexicographic, with index 0 being | |
| // the most significant. | |
| if (VR1 == VR2) | |
| return false; | |
| const BitTracker::RegisterCell &RC1 = CM.lookup(VR1), &RC2 = CM.lookup(VR2); | |
| uint16_t W1 = RC1.width(), W2 = RC2.width(); | |
| for (uint16_t i = 0, w = std::min(W1, W2); i < w; ++i) { | |
| const BitTracker::BitValue &V1 = RC1[i], &V2 = RC2[i]; | |
| if (V1 != V2) | |
| return BitOrd(V1, V2); | |
| } | |
| // Cells are equal up until the common length. | |
| if (W1 != W2) | |
| return W1 < W2; | |
| return BitOrd.BaseOrd[VR1] < BitOrd.BaseOrd[VR2]; | |
| } | |
| bool RegisterCellBitCompareSel::operator() (unsigned VR1, unsigned VR2) const { | |
| if (VR1 == VR2) | |
| return false; | |
| const BitTracker::RegisterCell &RC1 = CM.lookup(VR1); | |
| const BitTracker::RegisterCell &RC2 = CM.lookup(VR2); | |
| uint16_t W1 = RC1.width(), W2 = RC2.width(); | |
| uint16_t Bit1 = (VR1 == SelR) ? SelB : BitN; | |
| uint16_t Bit2 = (VR2 == SelR) ? SelB : BitN; | |
| // If Bit1 exceeds the width of VR1, then: | |
| // - return false, if at the same time Bit2 exceeds VR2, or | |
| // - return true, otherwise. | |
| // (I.e. "a bit value that does not exist is less than any bit value | |
| // that does exist".) | |
| if (W1 <= Bit1) | |
| return Bit2 < W2; | |
| // If Bit1 is within VR1, but Bit2 is not within VR2, return false. | |
| if (W2 <= Bit2) | |
| return false; | |
| const BitTracker::BitValue &V1 = RC1[Bit1], V2 = RC2[Bit2]; | |
| if (V1 != V2) | |
| return BitOrd(V1, V2); | |
| return false; | |
| } | |
| namespace { | |
| class OrderedRegisterList { | |
| using ListType = std::vector<unsigned>; | |
| const unsigned MaxSize; | |
| public: | |
| OrderedRegisterList(const RegisterOrdering &RO) | |
| : MaxSize(MaxORLSize), Ord(RO) {} | |
| void insert(unsigned VR); | |
| void remove(unsigned VR); | |
| unsigned operator[](unsigned Idx) const { | |
| assert(Idx < Seq.size()); | |
| return Seq[Idx]; | |
| } | |
| unsigned size() const { | |
| return Seq.size(); | |
| } | |
| using iterator = ListType::iterator; | |
| using const_iterator = ListType::const_iterator; | |
| iterator begin() { return Seq.begin(); } | |
| iterator end() { return Seq.end(); } | |
| const_iterator begin() const { return Seq.begin(); } | |
| const_iterator end() const { return Seq.end(); } | |
| // Convenience function to convert an iterator to the corresponding index. | |
| unsigned idx(iterator It) const { return It-begin(); } | |
| private: | |
| ListType Seq; | |
| const RegisterOrdering &Ord; | |
| }; | |
| struct PrintORL { | |
| PrintORL(const OrderedRegisterList &L, const TargetRegisterInfo *RI) | |
| : RL(L), TRI(RI) {} | |
| friend raw_ostream &operator<< (raw_ostream &OS, const PrintORL &P); | |
| private: | |
| const OrderedRegisterList &RL; | |
| const TargetRegisterInfo *TRI; | |
| }; | |
| raw_ostream &operator<< (raw_ostream &OS, const PrintORL &P) { | |
| OS << '('; | |
| OrderedRegisterList::const_iterator B = P.RL.begin(), E = P.RL.end(); | |
| for (OrderedRegisterList::const_iterator I = B; I != E; ++I) { | |
| if (I != B) | |
| OS << ", "; | |
| OS << printReg(*I, P.TRI); | |
| } | |
| OS << ')'; | |
| return OS; | |
| } | |
| } // end anonymous namespace | |
| void OrderedRegisterList::insert(unsigned VR) { | |
| iterator L = llvm::lower_bound(Seq, VR, Ord); | |
| if (L == Seq.end()) | |
| Seq.push_back(VR); | |
| else | |
| Seq.insert(L, VR); | |
| unsigned S = Seq.size(); | |
| if (S > MaxSize) | |
| Seq.resize(MaxSize); | |
| assert(Seq.size() <= MaxSize); | |
| } | |
| void OrderedRegisterList::remove(unsigned VR) { | |
| iterator L = llvm::lower_bound(Seq, VR, Ord); | |
| if (L != Seq.end()) | |
| Seq.erase(L); | |
| } | |
| namespace { | |
| // A record of the insert form. The fields correspond to the operands | |
| // of the "insert" instruction: | |
| // ... = insert(SrcR, InsR, #Wdh, #Off) | |
| struct IFRecord { | |
| IFRecord(unsigned SR = 0, unsigned IR = 0, uint16_t W = 0, uint16_t O = 0) | |
| : SrcR(SR), InsR(IR), Wdh(W), Off(O) {} | |
| unsigned SrcR, InsR; | |
| uint16_t Wdh, Off; | |
| }; | |
| struct PrintIFR { | |
| PrintIFR(const IFRecord &R, const TargetRegisterInfo *RI) | |
| : IFR(R), TRI(RI) {} | |
| private: | |
| friend raw_ostream &operator<< (raw_ostream &OS, const PrintIFR &P); | |
| const IFRecord &IFR; | |
| const TargetRegisterInfo *TRI; | |
| }; | |
| raw_ostream &operator<< (raw_ostream &OS, const PrintIFR &P) { | |
| unsigned SrcR = P.IFR.SrcR, InsR = P.IFR.InsR; | |
| OS << '(' << printReg(SrcR, P.TRI) << ',' << printReg(InsR, P.TRI) | |
| << ",#" << P.IFR.Wdh << ",#" << P.IFR.Off << ')'; | |
| return OS; | |
| } | |
| using IFRecordWithRegSet = std::pair<IFRecord, RegisterSet>; | |
| } // end anonymous namespace | |
| namespace llvm { | |
| void initializeHexagonGenInsertPass(PassRegistry&); | |
| FunctionPass *createHexagonGenInsert(); | |
| } // end namespace llvm | |
| namespace { | |
| class HexagonGenInsert : public MachineFunctionPass { | |
| public: | |
| static char ID; | |
| HexagonGenInsert() : MachineFunctionPass(ID) { | |
| initializeHexagonGenInsertPass(*PassRegistry::getPassRegistry()); | |
| } | |
| StringRef getPassName() const override { | |
| return "Hexagon generate \"insert\" instructions"; | |
| } | |
| void getAnalysisUsage(AnalysisUsage &AU) const override { | |
| AU.addRequired<MachineDominatorTree>(); | |
| AU.addPreserved<MachineDominatorTree>(); | |
| MachineFunctionPass::getAnalysisUsage(AU); | |
| } | |
| bool runOnMachineFunction(MachineFunction &MF) override; | |
| private: | |
| using PairMapType = DenseMap<std::pair<unsigned, unsigned>, unsigned>; | |
| void buildOrderingMF(RegisterOrdering &RO) const; | |
| void buildOrderingBT(RegisterOrdering &RB, RegisterOrdering &RO) const; | |
| bool isIntClass(const TargetRegisterClass *RC) const; | |
| bool isConstant(unsigned VR) const; | |
| bool isSmallConstant(unsigned VR) const; | |
| bool isValidInsertForm(unsigned DstR, unsigned SrcR, unsigned InsR, | |
| uint16_t L, uint16_t S) const; | |
| bool findSelfReference(unsigned VR) const; | |
| bool findNonSelfReference(unsigned VR) const; | |
| void getInstrDefs(const MachineInstr *MI, RegisterSet &Defs) const; | |
| void getInstrUses(const MachineInstr *MI, RegisterSet &Uses) const; | |
| unsigned distance(const MachineBasicBlock *FromB, | |
| const MachineBasicBlock *ToB, const UnsignedMap &RPO, | |
| PairMapType &M) const; | |
| unsigned distance(MachineBasicBlock::const_iterator FromI, | |
| MachineBasicBlock::const_iterator ToI, const UnsignedMap &RPO, | |
| PairMapType &M) const; | |
| bool findRecordInsertForms(unsigned VR, OrderedRegisterList &AVs); | |
| void collectInBlock(MachineBasicBlock *B, OrderedRegisterList &AVs); | |
| void findRemovableRegisters(unsigned VR, IFRecord IF, | |
| RegisterSet &RMs) const; | |
| void computeRemovableRegisters(); | |
| void pruneEmptyLists(); | |
| void pruneCoveredSets(unsigned VR); | |
| void pruneUsesTooFar(unsigned VR, const UnsignedMap &RPO, PairMapType &M); | |
| void pruneRegCopies(unsigned VR); | |
| void pruneCandidates(); | |
| void selectCandidates(); | |
| bool generateInserts(); | |
| bool removeDeadCode(MachineDomTreeNode *N); | |
| // IFRecord coupled with a set of potentially removable registers: | |
| using IFListType = std::vector<IFRecordWithRegSet>; | |
| using IFMapType = DenseMap<unsigned, IFListType>; // vreg -> IFListType | |
| void dump_map() const; | |
| const HexagonInstrInfo *HII = nullptr; | |
| const HexagonRegisterInfo *HRI = nullptr; | |
| MachineFunction *MFN; | |
| MachineRegisterInfo *MRI; | |
| MachineDominatorTree *MDT; | |
| CellMapShadow *CMS; | |
| RegisterOrdering BaseOrd; | |
| RegisterOrdering CellOrd; | |
| IFMapType IFMap; | |
| }; | |
| } // end anonymous namespace | |
| char HexagonGenInsert::ID = 0; | |
| void HexagonGenInsert::dump_map() const { | |
| using iterator = IFMapType::const_iterator; | |
| for (iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| dbgs() << " " << printReg(I->first, HRI) << ":\n"; | |
| const IFListType &LL = I->second; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) | |
| dbgs() << " " << PrintIFR(LL[i].first, HRI) << ", " | |
| << PrintRegSet(LL[i].second, HRI) << '\n'; | |
| } | |
| } | |
| void HexagonGenInsert::buildOrderingMF(RegisterOrdering &RO) const { | |
| unsigned Index = 0; | |
| using mf_iterator = MachineFunction::const_iterator; | |
| for (mf_iterator A = MFN->begin(), Z = MFN->end(); A != Z; ++A) { | |
| const MachineBasicBlock &B = *A; | |
| if (!CMS->BT.reached(&B)) | |
| continue; | |
| using mb_iterator = MachineBasicBlock::const_iterator; | |
| for (mb_iterator I = B.begin(), E = B.end(); I != E; ++I) { | |
| const MachineInstr *MI = &*I; | |
| for (unsigned i = 0, n = MI->getNumOperands(); i < n; ++i) { | |
| const MachineOperand &MO = MI->getOperand(i); | |
| if (MO.isReg() && MO.isDef()) { | |
| Register R = MO.getReg(); | |
| assert(MO.getSubReg() == 0 && "Unexpected subregister in definition"); | |
| if (Register::isVirtualRegister(R)) | |
| RO.insert(std::make_pair(R, Index++)); | |
| } | |
| } | |
| } | |
| } | |
| // Since some virtual registers may have had their def and uses eliminated, | |
| // they are no longer referenced in the code, and so they will not appear | |
| // in the map. | |
| } | |
| void HexagonGenInsert::buildOrderingBT(RegisterOrdering &RB, | |
| RegisterOrdering &RO) const { | |
| // Create a vector of all virtual registers (collect them from the base | |
| // ordering RB), and then sort it using the RegisterCell comparator. | |
| BitValueOrdering BVO(RB); | |
| RegisterCellLexCompare LexCmp(BVO, *CMS); | |
| using SortableVectorType = std::vector<unsigned>; | |
| SortableVectorType VRs; | |
| for (RegisterOrdering::iterator I = RB.begin(), E = RB.end(); I != E; ++I) | |
| VRs.push_back(I->first); | |
| llvm::sort(VRs, LexCmp); | |
| // Transfer the results to the outgoing register ordering. | |
| for (unsigned i = 0, n = VRs.size(); i < n; ++i) | |
| RO.insert(std::make_pair(VRs[i], i)); | |
| } | |
| inline bool HexagonGenInsert::isIntClass(const TargetRegisterClass *RC) const { | |
| return RC == &Hexagon::IntRegsRegClass || RC == &Hexagon::DoubleRegsRegClass; | |
| } | |
| bool HexagonGenInsert::isConstant(unsigned VR) const { | |
| const BitTracker::RegisterCell &RC = CMS->lookup(VR); | |
| uint16_t W = RC.width(); | |
| for (uint16_t i = 0; i < W; ++i) { | |
| const BitTracker::BitValue &BV = RC[i]; | |
| if (BV.is(0) || BV.is(1)) | |
| continue; | |
| return false; | |
| } | |
| return true; | |
| } | |
| bool HexagonGenInsert::isSmallConstant(unsigned VR) const { | |
| const BitTracker::RegisterCell &RC = CMS->lookup(VR); | |
| uint16_t W = RC.width(); | |
| if (W > 64) | |
| return false; | |
| uint64_t V = 0, B = 1; | |
| for (uint16_t i = 0; i < W; ++i) { | |
| const BitTracker::BitValue &BV = RC[i]; | |
| if (BV.is(1)) | |
| V |= B; | |
| else if (!BV.is(0)) | |
| return false; | |
| B <<= 1; | |
| } | |
| // For 32-bit registers, consider: Rd = #s16. | |
| if (W == 32) | |
| return isInt<16>(V); | |
| // For 64-bit registers, it's Rdd = #s8 or Rdd = combine(#s8,#s8) | |
| return isInt<8>(Lo_32(V)) && isInt<8>(Hi_32(V)); | |
| } | |
| bool HexagonGenInsert::isValidInsertForm(unsigned DstR, unsigned SrcR, | |
| unsigned InsR, uint16_t L, uint16_t S) const { | |
| const TargetRegisterClass *DstRC = MRI->getRegClass(DstR); | |
| const TargetRegisterClass *SrcRC = MRI->getRegClass(SrcR); | |
| const TargetRegisterClass *InsRC = MRI->getRegClass(InsR); | |
| // Only integet (32-/64-bit) register classes. | |
| if (!isIntClass(DstRC) || !isIntClass(SrcRC) || !isIntClass(InsRC)) | |
| return false; | |
| // The "source" register must be of the same class as DstR. | |
| if (DstRC != SrcRC) | |
| return false; | |
| if (DstRC == InsRC) | |
| return true; | |
| // A 64-bit register can only be generated from other 64-bit registers. | |
| if (DstRC == &Hexagon::DoubleRegsRegClass) | |
| return false; | |
| // Otherwise, the L and S cannot span 32-bit word boundary. | |
| if (S < 32 && S+L > 32) | |
| return false; | |
| return true; | |
| } | |
| bool HexagonGenInsert::findSelfReference(unsigned VR) const { | |
| const BitTracker::RegisterCell &RC = CMS->lookup(VR); | |
| for (uint16_t i = 0, w = RC.width(); i < w; ++i) { | |
| const BitTracker::BitValue &V = RC[i]; | |
| if (V.Type == BitTracker::BitValue::Ref && V.RefI.Reg == VR) | |
| return true; | |
| } | |
| return false; | |
| } | |
| bool HexagonGenInsert::findNonSelfReference(unsigned VR) const { | |
| BitTracker::RegisterCell RC = CMS->lookup(VR); | |
| for (uint16_t i = 0, w = RC.width(); i < w; ++i) { | |
| const BitTracker::BitValue &V = RC[i]; | |
| if (V.Type == BitTracker::BitValue::Ref && V.RefI.Reg != VR) | |
| return true; | |
| } | |
| return false; | |
| } | |
| void HexagonGenInsert::getInstrDefs(const MachineInstr *MI, | |
| RegisterSet &Defs) const { | |
| for (unsigned i = 0, n = MI->getNumOperands(); i < n; ++i) { | |
| const MachineOperand &MO = MI->getOperand(i); | |
| if (!MO.isReg() || !MO.isDef()) | |
| continue; | |
| Register R = MO.getReg(); | |
| if (!Register::isVirtualRegister(R)) | |
| continue; | |
| Defs.insert(R); | |
| } | |
| } | |
| void HexagonGenInsert::getInstrUses(const MachineInstr *MI, | |
| RegisterSet &Uses) const { | |
| for (unsigned i = 0, n = MI->getNumOperands(); i < n; ++i) { | |
| const MachineOperand &MO = MI->getOperand(i); | |
| if (!MO.isReg() || !MO.isUse()) | |
| continue; | |
| Register R = MO.getReg(); | |
| if (!Register::isVirtualRegister(R)) | |
| continue; | |
| Uses.insert(R); | |
| } | |
| } | |
| unsigned HexagonGenInsert::distance(const MachineBasicBlock *FromB, | |
| const MachineBasicBlock *ToB, const UnsignedMap &RPO, | |
| PairMapType &M) const { | |
| // Forward distance from the end of a block to the beginning of it does | |
| // not make sense. This function should not be called with FromB == ToB. | |
| assert(FromB != ToB); | |
| unsigned FromN = FromB->getNumber(), ToN = ToB->getNumber(); | |
| // If we have already computed it, return the cached result. | |
| PairMapType::iterator F = M.find(std::make_pair(FromN, ToN)); | |
| if (F != M.end()) | |
| return F->second; | |
| unsigned ToRPO = RPO.lookup(ToN); | |
| unsigned MaxD = 0; | |
| using pred_iterator = MachineBasicBlock::const_pred_iterator; | |
| for (pred_iterator I = ToB->pred_begin(), E = ToB->pred_end(); I != E; ++I) { | |
| const MachineBasicBlock *PB = *I; | |
| // Skip back edges. Also, if FromB is a predecessor of ToB, the distance | |
| // along that path will be 0, and we don't need to do any calculations | |
| // on it. | |
| if (PB == FromB || RPO.lookup(PB->getNumber()) >= ToRPO) | |
| continue; | |
| unsigned D = PB->size() + distance(FromB, PB, RPO, M); | |
| if (D > MaxD) | |
| MaxD = D; | |
| } | |
| // Memoize the result for later lookup. | |
| M.insert(std::make_pair(std::make_pair(FromN, ToN), MaxD)); | |
| return MaxD; | |
| } | |
| unsigned HexagonGenInsert::distance(MachineBasicBlock::const_iterator FromI, | |
| MachineBasicBlock::const_iterator ToI, const UnsignedMap &RPO, | |
| PairMapType &M) const { | |
| const MachineBasicBlock *FB = FromI->getParent(), *TB = ToI->getParent(); | |
| if (FB == TB) | |
| return std::distance(FromI, ToI); | |
| unsigned D1 = std::distance(TB->begin(), ToI); | |
| unsigned D2 = distance(FB, TB, RPO, M); | |
| unsigned D3 = std::distance(FromI, FB->end()); | |
| return D1+D2+D3; | |
| } | |
| bool HexagonGenInsert::findRecordInsertForms(unsigned VR, | |
| OrderedRegisterList &AVs) { | |
| if (isDebug()) { | |
| dbgs() << __func__ << ": " << printReg(VR, HRI) | |
| << " AVs: " << PrintORL(AVs, HRI) << "\n"; | |
| } | |
| if (AVs.size() == 0) | |
| return false; | |
| using iterator = OrderedRegisterList::iterator; | |
| BitValueOrdering BVO(BaseOrd); | |
| const BitTracker::RegisterCell &RC = CMS->lookup(VR); | |
| uint16_t W = RC.width(); | |
| using RSRecord = std::pair<unsigned, uint16_t>; // (reg,shift) | |
| using RSListType = std::vector<RSRecord>; | |
| // Have a map, with key being the matching prefix length, and the value | |
| // being the list of pairs (R,S), where R's prefix matches VR at S. | |
| // (DenseMap<uint16_t,RSListType> fails to instantiate.) | |
| using LRSMapType = DenseMap<unsigned, RSListType>; | |
| LRSMapType LM; | |
| // Conceptually, rotate the cell RC right (i.e. towards the LSB) by S, | |
| // and find matching prefixes from AVs with the rotated RC. Such a prefix | |
| // would match a string of bits (of length L) in RC starting at S. | |
| for (uint16_t S = 0; S < W; ++S) { | |
| iterator B = AVs.begin(), E = AVs.end(); | |
| // The registers in AVs are ordered according to the lexical order of | |
| // the corresponding register cells. This means that the range of regis- | |
| // ters in AVs that match a prefix of length L+1 will be contained in | |
| // the range that matches a prefix of length L. This means that we can | |
| // keep narrowing the search space as the prefix length goes up. This | |
| // helps reduce the overall complexity of the search. | |
| uint16_t L; | |
| for (L = 0; L < W-S; ++L) { | |
| // Compare against VR's bits starting at S, which emulates rotation | |
| // of VR by S. | |
| RegisterCellBitCompareSel RCB(VR, S+L, L, BVO, *CMS); | |
| iterator NewB = std::lower_bound(B, E, VR, RCB); | |
| iterator NewE = std::upper_bound(NewB, E, VR, RCB); | |
| // For the registers that are eliminated from the next range, L is | |
| // the longest prefix matching VR at position S (their prefixes | |
| // differ from VR at S+L). If L>0, record this information for later | |
| // use. | |
| if (L > 0) { | |
| for (iterator I = B; I != NewB; ++I) | |
| LM[L].push_back(std::make_pair(*I, S)); | |
| for (iterator I = NewE; I != E; ++I) | |
| LM[L].push_back(std::make_pair(*I, S)); | |
| } | |
| B = NewB, E = NewE; | |
| if (B == E) | |
| break; | |
| } | |
| // Record the final register range. If this range is non-empty, then | |
| // L=W-S. | |
| assert(B == E || L == W-S); | |
| if (B != E) { | |
| for (iterator I = B; I != E; ++I) | |
| LM[L].push_back(std::make_pair(*I, S)); | |
| // If B!=E, then we found a range of registers whose prefixes cover the | |
| // rest of VR from position S. There is no need to further advance S. | |
| break; | |
| } | |
| } | |
| if (isDebug()) { | |
| dbgs() << "Prefixes matching register " << printReg(VR, HRI) << "\n"; | |
| for (LRSMapType::iterator I = LM.begin(), E = LM.end(); I != E; ++I) { | |
| dbgs() << " L=" << I->first << ':'; | |
| const RSListType &LL = I->second; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) | |
| dbgs() << " (" << printReg(LL[i].first, HRI) << ",@" | |
| << LL[i].second << ')'; | |
| dbgs() << '\n'; | |
| } | |
| } | |
| bool Recorded = false; | |
| for (iterator I = AVs.begin(), E = AVs.end(); I != E; ++I) { | |
| unsigned SrcR = *I; | |
| int FDi = -1, LDi = -1; // First/last different bit. | |
| const BitTracker::RegisterCell &AC = CMS->lookup(SrcR); | |
| uint16_t AW = AC.width(); | |
| for (uint16_t i = 0, w = std::min(W, AW); i < w; ++i) { | |
| if (RC[i] == AC[i]) | |
| continue; | |
| if (FDi == -1) | |
| FDi = i; | |
| LDi = i; | |
| } | |
| if (FDi == -1) | |
| continue; // TODO (future): Record identical registers. | |
| // Look for a register whose prefix could patch the range [FD..LD] | |
| // where VR and SrcR differ. | |
| uint16_t FD = FDi, LD = LDi; // Switch to unsigned type. | |
| uint16_t MinL = LD-FD+1; | |
| for (uint16_t L = MinL; L < W; ++L) { | |
| LRSMapType::iterator F = LM.find(L); | |
| if (F == LM.end()) | |
| continue; | |
| RSListType &LL = F->second; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) { | |
| uint16_t S = LL[i].second; | |
| // MinL is the minimum length of the prefix. Any length above MinL | |
| // allows some flexibility as to where the prefix can start: | |
| // given the extra length EL=L-MinL, the prefix must start between | |
| // max(0,FD-EL) and FD. | |
| if (S > FD) // Starts too late. | |
| continue; | |
| uint16_t EL = L-MinL; | |
| uint16_t LowS = (EL < FD) ? FD-EL : 0; | |
| if (S < LowS) // Starts too early. | |
| continue; | |
| unsigned InsR = LL[i].first; | |
| if (!isValidInsertForm(VR, SrcR, InsR, L, S)) | |
| continue; | |
| if (isDebug()) { | |
| dbgs() << printReg(VR, HRI) << " = insert(" << printReg(SrcR, HRI) | |
| << ',' << printReg(InsR, HRI) << ",#" << L << ",#" | |
| << S << ")\n"; | |
| } | |
| IFRecordWithRegSet RR(IFRecord(SrcR, InsR, L, S), RegisterSet()); | |
| IFMap[VR].push_back(RR); | |
| Recorded = true; | |
| } | |
| } | |
| } | |
| return Recorded; | |
| } | |
| void HexagonGenInsert::collectInBlock(MachineBasicBlock *B, | |
| OrderedRegisterList &AVs) { | |
| if (isDebug()) | |
| dbgs() << "visiting block " << printMBBReference(*B) << "\n"; | |
| // First, check if this block is reachable at all. If not, the bit tracker | |
| // will not have any information about registers in it. | |
| if (!CMS->BT.reached(B)) | |
| return; | |
| bool DoConst = OptConst; | |
| // Keep a separate set of registers defined in this block, so that we | |
| // can remove them from the list of available registers once all DT | |
| // successors have been processed. | |
| RegisterSet BlockDefs, InsDefs; | |
| for (MachineBasicBlock::iterator I = B->begin(), E = B->end(); I != E; ++I) { | |
| MachineInstr *MI = &*I; | |
| InsDefs.clear(); | |
| getInstrDefs(MI, InsDefs); | |
| // Leave those alone. They are more transparent than "insert". | |
| bool Skip = MI->isCopy() || MI->isRegSequence(); | |
| if (!Skip) { | |
| // Visit all defined registers, and attempt to find the corresponding | |
| // "insert" representations. | |
| for (unsigned VR = InsDefs.find_first(); VR; VR = InsDefs.find_next(VR)) { | |
| // Do not collect registers that are known to be compile-time cons- | |
| // tants, unless requested. | |
| if (!DoConst && isConstant(VR)) | |
| continue; | |
| // If VR's cell contains a reference to VR, then VR cannot be defined | |
| // via "insert". If VR is a constant that can be generated in a single | |
| // instruction (without constant extenders), generating it via insert | |
| // makes no sense. | |
| if (findSelfReference(VR) || isSmallConstant(VR)) | |
| continue; | |
| findRecordInsertForms(VR, AVs); | |
| // Stop if the map size is too large. | |
| if (IFMap.size() > MaxIFMSize) | |
| return; | |
| } | |
| } | |
| // Insert the defined registers into the list of available registers | |
| // after they have been processed. | |
| for (unsigned VR = InsDefs.find_first(); VR; VR = InsDefs.find_next(VR)) | |
| AVs.insert(VR); | |
| BlockDefs.insert(InsDefs); | |
| } | |
| for (auto *DTN : children<MachineDomTreeNode*>(MDT->getNode(B))) { | |
| MachineBasicBlock *SB = DTN->getBlock(); | |
| collectInBlock(SB, AVs); | |
| } | |
| for (unsigned VR = BlockDefs.find_first(); VR; VR = BlockDefs.find_next(VR)) | |
| AVs.remove(VR); | |
| } | |
| void HexagonGenInsert::findRemovableRegisters(unsigned VR, IFRecord IF, | |
| RegisterSet &RMs) const { | |
| // For a given register VR and a insert form, find the registers that are | |
| // used by the current definition of VR, and which would no longer be | |
| // needed for it after the definition of VR is replaced with the insert | |
| // form. These are the registers that could potentially become dead. | |
| RegisterSet Regs[2]; | |
| unsigned S = 0; // Register set selector. | |
| Regs[S].insert(VR); | |
| while (!Regs[S].empty()) { | |
| // Breadth-first search. | |
| unsigned OtherS = 1-S; | |
| Regs[OtherS].clear(); | |
| for (unsigned R = Regs[S].find_first(); R; R = Regs[S].find_next(R)) { | |
| Regs[S].remove(R); | |
| if (R == IF.SrcR || R == IF.InsR) | |
| continue; | |
| // Check if a given register has bits that are references to any other | |
| // registers. This is to detect situations where the instruction that | |
| // defines register R takes register Q as an operand, but R itself does | |
| // not contain any bits from Q. Loads are examples of how this could | |
| // happen: | |
| // R = load Q | |
| // In this case (assuming we do not have any knowledge about the loaded | |
| // value), we must not treat R as a "conveyance" of the bits from Q. | |
| // (The information in BT about R's bits would have them as constants, | |
| // in case of zero-extending loads, or refs to R.) | |
| if (!findNonSelfReference(R)) | |
| continue; | |
| RMs.insert(R); | |
| const MachineInstr *DefI = MRI->getVRegDef(R); | |
| assert(DefI); | |
| // Do not iterate past PHI nodes to avoid infinite loops. This can | |
| // make the final set a bit less accurate, but the removable register | |
| // sets are an approximation anyway. | |
| if (DefI->isPHI()) | |
| continue; | |
| getInstrUses(DefI, Regs[OtherS]); | |
| } | |
| S = OtherS; | |
| } | |
| // The register VR is added to the list as a side-effect of the algorithm, | |
| // but it is not "potentially removable". A potentially removable register | |
| // is one that may become unused (dead) after conversion to the insert form | |
| // IF, and obviously VR (or its replacement) will not become dead by apply- | |
| // ing IF. | |
| RMs.remove(VR); | |
| } | |
| void HexagonGenInsert::computeRemovableRegisters() { | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| IFListType &LL = I->second; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) | |
| findRemovableRegisters(I->first, LL[i].first, LL[i].second); | |
| } | |
| } | |
| void HexagonGenInsert::pruneEmptyLists() { | |
| // Remove all entries from the map, where the register has no insert forms | |
| // associated with it. | |
| using IterListType = SmallVector<IFMapType::iterator, 16>; | |
| IterListType Prune; | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| if (I->second.empty()) | |
| Prune.push_back(I); | |
| } | |
| for (unsigned i = 0, n = Prune.size(); i < n; ++i) | |
| IFMap.erase(Prune[i]); | |
| } | |
| void HexagonGenInsert::pruneCoveredSets(unsigned VR) { | |
| IFMapType::iterator F = IFMap.find(VR); | |
| assert(F != IFMap.end()); | |
| IFListType &LL = F->second; | |
| // First, examine the IF candidates for register VR whose removable-regis- | |
| // ter sets are empty. This means that a given candidate will not help eli- | |
| // minate any registers, but since "insert" is not a constant-extendable | |
| // instruction, using such a candidate may reduce code size if the defini- | |
| // tion of VR is constant-extended. | |
| // If there exists a candidate with a non-empty set, the ones with empty | |
| // sets will not be used and can be removed. | |
| MachineInstr *DefVR = MRI->getVRegDef(VR); | |
| bool DefEx = HII->isConstExtended(*DefVR); | |
| bool HasNE = false; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) { | |
| if (LL[i].second.empty()) | |
| continue; | |
| HasNE = true; | |
| break; | |
| } | |
| if (!DefEx || HasNE) { | |
| // The definition of VR is not constant-extended, or there is a candidate | |
| // with a non-empty set. Remove all candidates with empty sets. | |
| auto IsEmpty = [] (const IFRecordWithRegSet &IR) -> bool { | |
| return IR.second.empty(); | |
| }; | |
| auto End = llvm::remove_if(LL, IsEmpty); | |
| if (End != LL.end()) | |
| LL.erase(End, LL.end()); | |
| } else { | |
| // The definition of VR is constant-extended, and all candidates have | |
| // empty removable-register sets. Pick the maximum candidate, and remove | |
| // all others. The "maximum" does not have any special meaning here, it | |
| // is only so that the candidate that will remain on the list is selec- | |
| // ted deterministically. | |
| IFRecord MaxIF = LL[0].first; | |
| for (unsigned i = 1, n = LL.size(); i < n; ++i) { | |
| // If LL[MaxI] < LL[i], then MaxI = i. | |
| const IFRecord &IF = LL[i].first; | |
| unsigned M0 = BaseOrd[MaxIF.SrcR], M1 = BaseOrd[MaxIF.InsR]; | |
| unsigned R0 = BaseOrd[IF.SrcR], R1 = BaseOrd[IF.InsR]; | |
| if (M0 > R0) | |
| continue; | |
| if (M0 == R0) { | |
| if (M1 > R1) | |
| continue; | |
| if (M1 == R1) { | |
| if (MaxIF.Wdh > IF.Wdh) | |
| continue; | |
| if (MaxIF.Wdh == IF.Wdh && MaxIF.Off >= IF.Off) | |
| continue; | |
| } | |
| } | |
| // MaxIF < IF. | |
| MaxIF = IF; | |
| } | |
| // Remove everything except the maximum candidate. All register sets | |
| // are empty, so no need to preserve anything. | |
| LL.clear(); | |
| LL.push_back(std::make_pair(MaxIF, RegisterSet())); | |
| } | |
| // Now, remove those whose sets of potentially removable registers are | |
| // contained in another IF candidate for VR. For example, given these | |
| // candidates for %45, | |
| // %45: | |
| // (%44,%41,#9,#8), { %42 } | |
| // (%43,%41,#9,#8), { %42 %44 } | |
| // remove the first one, since it is contained in the second one. | |
| for (unsigned i = 0, n = LL.size(); i < n; ) { | |
| const RegisterSet &RMi = LL[i].second; | |
| unsigned j = 0; | |
| while (j < n) { | |
| if (j != i && LL[j].second.includes(RMi)) | |
| break; | |
| j++; | |
| } | |
| if (j == n) { // RMi not contained in anything else. | |
| i++; | |
| continue; | |
| } | |
| LL.erase(LL.begin()+i); | |
| n = LL.size(); | |
| } | |
| } | |
| void HexagonGenInsert::pruneUsesTooFar(unsigned VR, const UnsignedMap &RPO, | |
| PairMapType &M) { | |
| IFMapType::iterator F = IFMap.find(VR); | |
| assert(F != IFMap.end()); | |
| IFListType &LL = F->second; | |
| unsigned Cutoff = VRegDistCutoff; | |
| const MachineInstr *DefV = MRI->getVRegDef(VR); | |
| for (unsigned i = LL.size(); i > 0; --i) { | |
| unsigned SR = LL[i-1].first.SrcR, IR = LL[i-1].first.InsR; | |
| const MachineInstr *DefS = MRI->getVRegDef(SR); | |
| const MachineInstr *DefI = MRI->getVRegDef(IR); | |
| unsigned DSV = distance(DefS, DefV, RPO, M); | |
| if (DSV < Cutoff) { | |
| unsigned DIV = distance(DefI, DefV, RPO, M); | |
| if (DIV < Cutoff) | |
| continue; | |
| } | |
| LL.erase(LL.begin()+(i-1)); | |
| } | |
| } | |
| void HexagonGenInsert::pruneRegCopies(unsigned VR) { | |
| IFMapType::iterator F = IFMap.find(VR); | |
| assert(F != IFMap.end()); | |
| IFListType &LL = F->second; | |
| auto IsCopy = [] (const IFRecordWithRegSet &IR) -> bool { | |
| return IR.first.Wdh == 32 && (IR.first.Off == 0 || IR.first.Off == 32); | |
| }; | |
| auto End = llvm::remove_if(LL, IsCopy); | |
| if (End != LL.end()) | |
| LL.erase(End, LL.end()); | |
| } | |
| void HexagonGenInsert::pruneCandidates() { | |
| // Remove candidates that are not beneficial, regardless of the final | |
| // selection method. | |
| // First, remove candidates whose potentially removable set is a subset | |
| // of another candidate's set. | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) | |
| pruneCoveredSets(I->first); | |
| UnsignedMap RPO; | |
| using RPOTType = ReversePostOrderTraversal<const MachineFunction *>; | |
| RPOTType RPOT(MFN); | |
| unsigned RPON = 0; | |
| for (RPOTType::rpo_iterator I = RPOT.begin(), E = RPOT.end(); I != E; ++I) | |
| RPO[(*I)->getNumber()] = RPON++; | |
| PairMapType Memo; // Memoization map for distance calculation. | |
| // Remove candidates that would use registers defined too far away. | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) | |
| pruneUsesTooFar(I->first, RPO, Memo); | |
| pruneEmptyLists(); | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) | |
| pruneRegCopies(I->first); | |
| } | |
| namespace { | |
| // Class for comparing IF candidates for registers that have multiple of | |
| // them. The smaller the candidate, according to this ordering, the better. | |
| // First, compare the number of zeros in the associated potentially remova- | |
| // ble register sets. "Zero" indicates that the register is very likely to | |
| // become dead after this transformation. | |
| // Second, compare "averages", i.e. use-count per size. The lower wins. | |
| // After that, it does not really matter which one is smaller. Resolve | |
| // the tie in some deterministic way. | |
| struct IFOrdering { | |
| IFOrdering(const UnsignedMap &UC, const RegisterOrdering &BO) | |
| : UseC(UC), BaseOrd(BO) {} | |
| bool operator() (const IFRecordWithRegSet &A, | |
| const IFRecordWithRegSet &B) const; | |
| private: | |
| void stats(const RegisterSet &Rs, unsigned &Size, unsigned &Zero, | |
| unsigned &Sum) const; | |
| const UnsignedMap &UseC; | |
| const RegisterOrdering &BaseOrd; | |
| }; | |
| } // end anonymous namespace | |
| bool IFOrdering::operator() (const IFRecordWithRegSet &A, | |
| const IFRecordWithRegSet &B) const { | |
| unsigned SizeA = 0, ZeroA = 0, SumA = 0; | |
| unsigned SizeB = 0, ZeroB = 0, SumB = 0; | |
| stats(A.second, SizeA, ZeroA, SumA); | |
| stats(B.second, SizeB, ZeroB, SumB); | |
| // We will pick the minimum element. The more zeros, the better. | |
| if (ZeroA != ZeroB) | |
| return ZeroA > ZeroB; | |
| // Compare SumA/SizeA with SumB/SizeB, lower is better. | |
| uint64_t AvgA = SumA*SizeB, AvgB = SumB*SizeA; | |
| if (AvgA != AvgB) | |
| return AvgA < AvgB; | |
| // The sets compare identical so far. Resort to comparing the IF records. | |
| // The actual values don't matter, this is only for determinism. | |
| unsigned OSA = BaseOrd[A.first.SrcR], OSB = BaseOrd[B.first.SrcR]; | |
| if (OSA != OSB) | |
| return OSA < OSB; | |
| unsigned OIA = BaseOrd[A.first.InsR], OIB = BaseOrd[B.first.InsR]; | |
| if (OIA != OIB) | |
| return OIA < OIB; | |
| if (A.first.Wdh != B.first.Wdh) | |
| return A.first.Wdh < B.first.Wdh; | |
| return A.first.Off < B.first.Off; | |
| } | |
| void IFOrdering::stats(const RegisterSet &Rs, unsigned &Size, unsigned &Zero, | |
| unsigned &Sum) const { | |
| for (unsigned R = Rs.find_first(); R; R = Rs.find_next(R)) { | |
| UnsignedMap::const_iterator F = UseC.find(R); | |
| assert(F != UseC.end()); | |
| unsigned UC = F->second; | |
| if (UC == 0) | |
| Zero++; | |
| Sum += UC; | |
| Size++; | |
| } | |
| } | |
| void HexagonGenInsert::selectCandidates() { | |
| // Some registers may have multiple valid candidates. Pick the best one | |
| // (or decide not to use any). | |
| // Compute the "removability" measure of R: | |
| // For each potentially removable register R, record the number of regis- | |
| // ters with IF candidates, where R appears in at least one set. | |
| RegisterSet AllRMs; | |
| UnsignedMap UseC, RemC; | |
| IFMapType::iterator End = IFMap.end(); | |
| for (IFMapType::iterator I = IFMap.begin(); I != End; ++I) { | |
| const IFListType &LL = I->second; | |
| RegisterSet TT; | |
| for (unsigned i = 0, n = LL.size(); i < n; ++i) | |
| TT.insert(LL[i].second); | |
| for (unsigned R = TT.find_first(); R; R = TT.find_next(R)) | |
| RemC[R]++; | |
| AllRMs.insert(TT); | |
| } | |
| for (unsigned R = AllRMs.find_first(); R; R = AllRMs.find_next(R)) { | |
| using use_iterator = MachineRegisterInfo::use_nodbg_iterator; | |
| using InstrSet = SmallSet<const MachineInstr *, 16>; | |
| InstrSet UIs; | |
| // Count as the number of instructions in which R is used, not the | |
| // number of operands. | |
| use_iterator E = MRI->use_nodbg_end(); | |
| for (use_iterator I = MRI->use_nodbg_begin(R); I != E; ++I) | |
| UIs.insert(I->getParent()); | |
| unsigned C = UIs.size(); | |
| // Calculate a measure, which is the number of instructions using R, | |
| // minus the "removability" count computed earlier. | |
| unsigned D = RemC[R]; | |
| UseC[R] = (C > D) ? C-D : 0; // doz | |
| } | |
| bool SelectAll0 = OptSelectAll0, SelectHas0 = OptSelectHas0; | |
| if (!SelectAll0 && !SelectHas0) | |
| SelectAll0 = true; | |
| // The smaller the number UseC for a given register R, the "less used" | |
| // R is aside from the opportunities for removal offered by generating | |
| // "insert" instructions. | |
| // Iterate over the IF map, and for those registers that have multiple | |
| // candidates, pick the minimum one according to IFOrdering. | |
| IFOrdering IFO(UseC, BaseOrd); | |
| for (IFMapType::iterator I = IFMap.begin(); I != End; ++I) { | |
| IFListType &LL = I->second; | |
| if (LL.empty()) | |
| continue; | |
| // Get the minimum element, remember it and clear the list. If the | |
| // element found is adequate, we will put it back on the list, other- | |
| // wise the list will remain empty, and the entry for this register | |
| // will be removed (i.e. this register will not be replaced by insert). | |
| IFListType::iterator MinI = std::min_element(LL.begin(), LL.end(), IFO); | |
| assert(MinI != LL.end()); | |
| IFRecordWithRegSet M = *MinI; | |
| LL.clear(); | |
| // We want to make sure that this replacement will have a chance to be | |
| // beneficial, and that means that we want to have indication that some | |
| // register will be removed. The most likely registers to be eliminated | |
| // are the use operands in the definition of I->first. Accept/reject a | |
| // candidate based on how many of its uses it can potentially eliminate. | |
| RegisterSet Us; | |
| const MachineInstr *DefI = MRI->getVRegDef(I->first); | |
| getInstrUses(DefI, Us); | |
| bool Accept = false; | |
| if (SelectAll0) { | |
| bool All0 = true; | |
| for (unsigned R = Us.find_first(); R; R = Us.find_next(R)) { | |
| if (UseC[R] == 0) | |
| continue; | |
| All0 = false; | |
| break; | |
| } | |
| Accept = All0; | |
| } else if (SelectHas0) { | |
| bool Has0 = false; | |
| for (unsigned R = Us.find_first(); R; R = Us.find_next(R)) { | |
| if (UseC[R] != 0) | |
| continue; | |
| Has0 = true; | |
| break; | |
| } | |
| Accept = Has0; | |
| } | |
| if (Accept) | |
| LL.push_back(M); | |
| } | |
| // Remove candidates that add uses of removable registers, unless the | |
| // removable registers are among replacement candidates. | |
| // Recompute the removable registers, since some candidates may have | |
| // been eliminated. | |
| AllRMs.clear(); | |
| for (IFMapType::iterator I = IFMap.begin(); I != End; ++I) { | |
| const IFListType &LL = I->second; | |
| if (!LL.empty()) | |
| AllRMs.insert(LL[0].second); | |
| } | |
| for (IFMapType::iterator I = IFMap.begin(); I != End; ++I) { | |
| IFListType &LL = I->second; | |
| if (LL.empty()) | |
| continue; | |
| unsigned SR = LL[0].first.SrcR, IR = LL[0].first.InsR; | |
| if (AllRMs[SR] || AllRMs[IR]) | |
| LL.clear(); | |
| } | |
| pruneEmptyLists(); | |
| } | |
| bool HexagonGenInsert::generateInserts() { | |
| // Create a new register for each one from IFMap, and store them in the | |
| // map. | |
| UnsignedMap RegMap; | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| unsigned VR = I->first; | |
| const TargetRegisterClass *RC = MRI->getRegClass(VR); | |
| Register NewVR = MRI->createVirtualRegister(RC); | |
| RegMap[VR] = NewVR; | |
| } | |
| // We can generate the "insert" instructions using potentially stale re- | |
| // gisters: SrcR and InsR for a given VR may be among other registers that | |
| // are also replaced. This is fine, we will do the mass "rauw" a bit later. | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| MachineInstr *MI = MRI->getVRegDef(I->first); | |
| MachineBasicBlock &B = *MI->getParent(); | |
| DebugLoc DL = MI->getDebugLoc(); | |
| unsigned NewR = RegMap[I->first]; | |
| bool R32 = MRI->getRegClass(NewR) == &Hexagon::IntRegsRegClass; | |
| const MCInstrDesc &D = R32 ? HII->get(Hexagon::S2_insert) | |
| : HII->get(Hexagon::S2_insertp); | |
| IFRecord IF = I->second[0].first; | |
| unsigned Wdh = IF.Wdh, Off = IF.Off; | |
| unsigned InsS = 0; | |
| if (R32 && MRI->getRegClass(IF.InsR) == &Hexagon::DoubleRegsRegClass) { | |
| InsS = Hexagon::isub_lo; | |
| if (Off >= 32) { | |
| InsS = Hexagon::isub_hi; | |
| Off -= 32; | |
| } | |
| } | |
| // Advance to the proper location for inserting instructions. This could | |
| // be B.end(). | |
| MachineBasicBlock::iterator At = MI; | |
| if (MI->isPHI()) | |
| At = B.getFirstNonPHI(); | |
| BuildMI(B, At, DL, D, NewR) | |
| .addReg(IF.SrcR) | |
| .addReg(IF.InsR, 0, InsS) | |
| .addImm(Wdh) | |
| .addImm(Off); | |
| MRI->clearKillFlags(IF.SrcR); | |
| MRI->clearKillFlags(IF.InsR); | |
| } | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| MachineInstr *DefI = MRI->getVRegDef(I->first); | |
| MRI->replaceRegWith(I->first, RegMap[I->first]); | |
| DefI->eraseFromParent(); | |
| } | |
| return true; | |
| } | |
| bool HexagonGenInsert::removeDeadCode(MachineDomTreeNode *N) { | |
| bool Changed = false; | |
| for (auto *DTN : children<MachineDomTreeNode*>(N)) | |
| Changed |= removeDeadCode(DTN); | |
| MachineBasicBlock *B = N->getBlock(); | |
| std::vector<MachineInstr*> Instrs; | |
| for (auto I = B->rbegin(), E = B->rend(); I != E; ++I) | |
| Instrs.push_back(&*I); | |
| for (auto I = Instrs.begin(), E = Instrs.end(); I != E; ++I) { | |
| MachineInstr *MI = *I; | |
| unsigned Opc = MI->getOpcode(); | |
| // Do not touch lifetime markers. This is why the target-independent DCE | |
| // cannot be used. | |
| if (Opc == TargetOpcode::LIFETIME_START || | |
| Opc == TargetOpcode::LIFETIME_END) | |
| continue; | |
| bool Store = false; | |
| if (MI->isInlineAsm() || !MI->isSafeToMove(nullptr, Store)) | |
| continue; | |
| bool AllDead = true; | |
| SmallVector<unsigned,2> Regs; | |
| for (const MachineOperand &MO : MI->operands()) { | |
| if (!MO.isReg() || !MO.isDef()) | |
| continue; | |
| Register R = MO.getReg(); | |
| if (!Register::isVirtualRegister(R) || !MRI->use_nodbg_empty(R)) { | |
| AllDead = false; | |
| break; | |
| } | |
| Regs.push_back(R); | |
| } | |
| if (!AllDead) | |
| continue; | |
| B->erase(MI); | |
| for (unsigned I = 0, N = Regs.size(); I != N; ++I) | |
| MRI->markUsesInDebugValueAsUndef(Regs[I]); | |
| Changed = true; | |
| } | |
| return Changed; | |
| } | |
| bool HexagonGenInsert::runOnMachineFunction(MachineFunction &MF) { | |
| if (skipFunction(MF.getFunction())) | |
| return false; | |
| bool Timing = OptTiming, TimingDetail = Timing && OptTimingDetail; | |
| bool Changed = false; | |
| // Sanity check: one, but not both. | |
| assert(!OptSelectAll0 || !OptSelectHas0); | |
| IFMap.clear(); | |
| BaseOrd.clear(); | |
| CellOrd.clear(); | |
| const auto &ST = MF.getSubtarget<HexagonSubtarget>(); | |
| HII = ST.getInstrInfo(); | |
| HRI = ST.getRegisterInfo(); | |
| MFN = &MF; | |
| MRI = &MF.getRegInfo(); | |
| MDT = &getAnalysis<MachineDominatorTree>(); | |
| // Clean up before any further processing, so that dead code does not | |
| // get used in a newly generated "insert" instruction. Have a custom | |
| // version of DCE that preserves lifetime markers. Without it, merging | |
| // of stack objects can fail to recognize and merge disjoint objects | |
| // leading to unnecessary stack growth. | |
| Changed = removeDeadCode(MDT->getRootNode()); | |
| const HexagonEvaluator HE(*HRI, *MRI, *HII, MF); | |
| BitTracker BTLoc(HE, MF); | |
| BTLoc.trace(isDebug()); | |
| BTLoc.run(); | |
| CellMapShadow MS(BTLoc); | |
| CMS = &MS; | |
| buildOrderingMF(BaseOrd); | |
| buildOrderingBT(BaseOrd, CellOrd); | |
| if (isDebug()) { | |
| dbgs() << "Cell ordering:\n"; | |
| for (RegisterOrdering::iterator I = CellOrd.begin(), E = CellOrd.end(); | |
| I != E; ++I) { | |
| unsigned VR = I->first, Pos = I->second; | |
| dbgs() << printReg(VR, HRI) << " -> " << Pos << "\n"; | |
| } | |
| } | |
| // Collect candidates for conversion into the insert forms. | |
| MachineBasicBlock *RootB = MDT->getRoot(); | |
| OrderedRegisterList AvailR(CellOrd); | |
| const char *const TGName = "hexinsert"; | |
| const char *const TGDesc = "Generate Insert Instructions"; | |
| { | |
| NamedRegionTimer _T("collection", "collection", TGName, TGDesc, | |
| TimingDetail); | |
| collectInBlock(RootB, AvailR); | |
| // Complete the information gathered in IFMap. | |
| computeRemovableRegisters(); | |
| } | |
| if (isDebug()) { | |
| dbgs() << "Candidates after collection:\n"; | |
| dump_map(); | |
| } | |
| if (IFMap.empty()) | |
| return Changed; | |
| { | |
| NamedRegionTimer _T("pruning", "pruning", TGName, TGDesc, TimingDetail); | |
| pruneCandidates(); | |
| } | |
| if (isDebug()) { | |
| dbgs() << "Candidates after pruning:\n"; | |
| dump_map(); | |
| } | |
| if (IFMap.empty()) | |
| return Changed; | |
| { | |
| NamedRegionTimer _T("selection", "selection", TGName, TGDesc, TimingDetail); | |
| selectCandidates(); | |
| } | |
| if (isDebug()) { | |
| dbgs() << "Candidates after selection:\n"; | |
| dump_map(); | |
| } | |
| // Filter out vregs beyond the cutoff. | |
| if (VRegIndexCutoff.getPosition()) { | |
| unsigned Cutoff = VRegIndexCutoff; | |
| using IterListType = SmallVector<IFMapType::iterator, 16>; | |
| IterListType Out; | |
| for (IFMapType::iterator I = IFMap.begin(), E = IFMap.end(); I != E; ++I) { | |
| unsigned Idx = Register::virtReg2Index(I->first); | |
| if (Idx >= Cutoff) | |
| Out.push_back(I); | |
| } | |
| for (unsigned i = 0, n = Out.size(); i < n; ++i) | |
| IFMap.erase(Out[i]); | |
| } | |
| if (IFMap.empty()) | |
| return Changed; | |
| { | |
| NamedRegionTimer _T("generation", "generation", TGName, TGDesc, | |
| TimingDetail); | |
| generateInserts(); | |
| } | |
| return true; | |
| } | |
| FunctionPass *llvm::createHexagonGenInsert() { | |
| return new HexagonGenInsert(); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Public Constructor Functions | |
| //===----------------------------------------------------------------------===// | |
| INITIALIZE_PASS_BEGIN(HexagonGenInsert, "hexinsert", | |
| "Hexagon generate \"insert\" instructions", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree) | |
| INITIALIZE_PASS_END(HexagonGenInsert, "hexinsert", | |
| "Hexagon generate \"insert\" instructions", false, false) |