| // Copyright (c) 2018 The Khronos Group Inc. | |
| // Copyright (c) 2018 Valve Corporation | |
| // Copyright (c) 2018 LunarG Inc. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "source/opt/dead_insert_elim_pass.h" | |
| #include "source/opt/composite.h" | |
| #include "source/opt/ir_context.h" | |
| #include "source/opt/iterator.h" | |
| #include "spirv/1.2/GLSL.std.450.h" | |
| namespace spvtools { | |
| namespace opt { | |
| namespace { | |
| constexpr uint32_t kTypeVectorCountInIdx = 1; | |
| constexpr uint32_t kTypeMatrixCountInIdx = 1; | |
| constexpr uint32_t kTypeArrayLengthIdInIdx = 1; | |
| constexpr uint32_t kTypeIntWidthInIdx = 0; | |
| constexpr uint32_t kConstantValueInIdx = 0; | |
| constexpr uint32_t kInsertObjectIdInIdx = 0; | |
| constexpr uint32_t kInsertCompositeIdInIdx = 1; | |
| } // namespace | |
| uint32_t DeadInsertElimPass::NumComponents(Instruction* typeInst) { | |
| switch (typeInst->opcode()) { | |
| case spv::Op::OpTypeVector: { | |
| return typeInst->GetSingleWordInOperand(kTypeVectorCountInIdx); | |
| } break; | |
| case spv::Op::OpTypeMatrix: { | |
| return typeInst->GetSingleWordInOperand(kTypeMatrixCountInIdx); | |
| } break; | |
| case spv::Op::OpTypeArray: { | |
| uint32_t lenId = | |
| typeInst->GetSingleWordInOperand(kTypeArrayLengthIdInIdx); | |
| Instruction* lenInst = get_def_use_mgr()->GetDef(lenId); | |
| if (lenInst->opcode() != spv::Op::OpConstant) return 0; | |
| uint32_t lenTypeId = lenInst->type_id(); | |
| Instruction* lenTypeInst = get_def_use_mgr()->GetDef(lenTypeId); | |
| // TODO(greg-lunarg): Support non-32-bit array length | |
| if (lenTypeInst->GetSingleWordInOperand(kTypeIntWidthInIdx) != 32) | |
| return 0; | |
| return lenInst->GetSingleWordInOperand(kConstantValueInIdx); | |
| } break; | |
| case spv::Op::OpTypeStruct: { | |
| return typeInst->NumInOperands(); | |
| } break; | |
| default: { return 0; } break; | |
| } | |
| } | |
| void DeadInsertElimPass::MarkInsertChain( | |
| Instruction* insertChain, std::vector<uint32_t>* pExtIndices, | |
| uint32_t extOffset, std::unordered_set<uint32_t>* visited_phis) { | |
| // Not currently optimizing array inserts. | |
| Instruction* typeInst = get_def_use_mgr()->GetDef(insertChain->type_id()); | |
| if (typeInst->opcode() == spv::Op::OpTypeArray) return; | |
| // Insert chains are only composed of inserts and phis | |
| if (insertChain->opcode() != spv::Op::OpCompositeInsert && | |
| insertChain->opcode() != spv::Op::OpPhi) | |
| return; | |
| // If extract indices are empty, mark all subcomponents if type | |
| // is constant length. | |
| if (pExtIndices == nullptr) { | |
| uint32_t cnum = NumComponents(typeInst); | |
| if (cnum > 0) { | |
| std::vector<uint32_t> extIndices; | |
| for (uint32_t i = 0; i < cnum; i++) { | |
| extIndices.clear(); | |
| extIndices.push_back(i); | |
| std::unordered_set<uint32_t> sub_visited_phis; | |
| MarkInsertChain(insertChain, &extIndices, 0, &sub_visited_phis); | |
| } | |
| return; | |
| } | |
| } | |
| Instruction* insInst = insertChain; | |
| while (insInst->opcode() == spv::Op::OpCompositeInsert) { | |
| // If no extract indices, mark insert and inserted object (which might | |
| // also be an insert chain) and continue up the chain though the input | |
| // composite. | |
| // | |
| // Note: We mark inserted objects in this function (rather than in | |
| // EliminateDeadInsertsOnePass) because in some cases, we can do it | |
| // more accurately here. | |
| if (pExtIndices == nullptr) { | |
| liveInserts_.insert(insInst->result_id()); | |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); | |
| std::unordered_set<uint32_t> obj_visited_phis; | |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, | |
| &obj_visited_phis); | |
| // If extract indices match insert, we are done. Mark insert and | |
| // inserted object. | |
| } else if (ExtInsMatch(*pExtIndices, insInst, extOffset)) { | |
| liveInserts_.insert(insInst->result_id()); | |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); | |
| std::unordered_set<uint32_t> obj_visited_phis; | |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, | |
| &obj_visited_phis); | |
| break; | |
| // If non-matching intersection, mark insert | |
| } else if (ExtInsConflict(*pExtIndices, insInst, extOffset)) { | |
| liveInserts_.insert(insInst->result_id()); | |
| // If more extract indices than insert, we are done. Use remaining | |
| // extract indices to mark inserted object. | |
| uint32_t numInsertIndices = insInst->NumInOperands() - 2; | |
| if (pExtIndices->size() - extOffset > numInsertIndices) { | |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); | |
| std::unordered_set<uint32_t> obj_visited_phis; | |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), pExtIndices, | |
| extOffset + numInsertIndices, &obj_visited_phis); | |
| break; | |
| // If fewer extract indices than insert, also mark inserted object and | |
| // continue up chain. | |
| } else { | |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); | |
| std::unordered_set<uint32_t> obj_visited_phis; | |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, | |
| &obj_visited_phis); | |
| } | |
| } | |
| // Get next insert in chain | |
| const uint32_t compId = | |
| insInst->GetSingleWordInOperand(kInsertCompositeIdInIdx); | |
| insInst = get_def_use_mgr()->GetDef(compId); | |
| } | |
| // If insert chain ended with phi, do recursive call on each operand | |
| if (insInst->opcode() != spv::Op::OpPhi) return; | |
| // Mark phi visited to prevent potential infinite loop. If phi is already | |
| // visited, return to avoid infinite loop. | |
| if (visited_phis->count(insInst->result_id()) != 0) return; | |
| visited_phis->insert(insInst->result_id()); | |
| // Phis may have duplicate inputs values for different edges, prune incoming | |
| // ids lists before recursing. | |
| std::vector<uint32_t> ids; | |
| for (uint32_t i = 0; i < insInst->NumInOperands(); i += 2) { | |
| ids.push_back(insInst->GetSingleWordInOperand(i)); | |
| } | |
| std::sort(ids.begin(), ids.end()); | |
| auto new_end = std::unique(ids.begin(), ids.end()); | |
| for (auto id_iter = ids.begin(); id_iter != new_end; ++id_iter) { | |
| Instruction* pi = get_def_use_mgr()->GetDef(*id_iter); | |
| MarkInsertChain(pi, pExtIndices, extOffset, visited_phis); | |
| } | |
| } | |
| bool DeadInsertElimPass::EliminateDeadInserts(Function* func) { | |
| bool modified = false; | |
| bool lastmodified = true; | |
| // Each pass can delete dead instructions, thus potentially revealing | |
| // new dead insertions ie insertions with no uses. | |
| while (lastmodified) { | |
| lastmodified = EliminateDeadInsertsOnePass(func); | |
| modified |= lastmodified; | |
| } | |
| return modified; | |
| } | |
| bool DeadInsertElimPass::EliminateDeadInsertsOnePass(Function* func) { | |
| bool modified = false; | |
| liveInserts_.clear(); | |
| visitedPhis_.clear(); | |
| // Mark all live inserts | |
| for (auto bi = func->begin(); bi != func->end(); ++bi) { | |
| for (auto ii = bi->begin(); ii != bi->end(); ++ii) { | |
| // Only process Inserts and composite Phis | |
| spv::Op op = ii->opcode(); | |
| Instruction* typeInst = get_def_use_mgr()->GetDef(ii->type_id()); | |
| if (op != spv::Op::OpCompositeInsert && | |
| (op != spv::Op::OpPhi || !spvOpcodeIsComposite(typeInst->opcode()))) | |
| continue; | |
| // The marking algorithm can be expensive for large arrays and the | |
| // efficacy of eliminating dead inserts into arrays is questionable. | |
| // Skip optimizing array inserts for now. Just mark them live. | |
| // TODO(greg-lunarg): Eliminate dead array inserts | |
| if (op == spv::Op::OpCompositeInsert) { | |
| if (typeInst->opcode() == spv::Op::OpTypeArray) { | |
| liveInserts_.insert(ii->result_id()); | |
| continue; | |
| } | |
| } | |
| const uint32_t id = ii->result_id(); | |
| get_def_use_mgr()->ForEachUser(id, [&ii, this](Instruction* user) { | |
| if (user->IsCommonDebugInstr()) return; | |
| switch (user->opcode()) { | |
| case spv::Op::OpCompositeInsert: | |
| case spv::Op::OpPhi: | |
| // Use by insert or phi does not initiate marking | |
| break; | |
| case spv::Op::OpCompositeExtract: { | |
| // Capture extract indices | |
| std::vector<uint32_t> extIndices; | |
| uint32_t icnt = 0; | |
| user->ForEachInOperand([&icnt, &extIndices](const uint32_t* idp) { | |
| if (icnt > 0) extIndices.push_back(*idp); | |
| ++icnt; | |
| }); | |
| // Mark all inserts in chain that intersect with extract | |
| std::unordered_set<uint32_t> visited_phis; | |
| MarkInsertChain(&*ii, &extIndices, 0, &visited_phis); | |
| } break; | |
| default: { | |
| // Mark inserts in chain for all components | |
| MarkInsertChain(&*ii, nullptr, 0, nullptr); | |
| } break; | |
| } | |
| }); | |
| } | |
| } | |
| // Find and disconnect dead inserts | |
| std::vector<Instruction*> dead_instructions; | |
| for (auto bi = func->begin(); bi != func->end(); ++bi) { | |
| for (auto ii = bi->begin(); ii != bi->end(); ++ii) { | |
| if (ii->opcode() != spv::Op::OpCompositeInsert) continue; | |
| const uint32_t id = ii->result_id(); | |
| if (liveInserts_.find(id) != liveInserts_.end()) continue; | |
| const uint32_t replId = | |
| ii->GetSingleWordInOperand(kInsertCompositeIdInIdx); | |
| (void)context()->ReplaceAllUsesWith(id, replId); | |
| dead_instructions.push_back(&*ii); | |
| modified = true; | |
| } | |
| } | |
| // DCE dead inserts | |
| while (!dead_instructions.empty()) { | |
| Instruction* inst = dead_instructions.back(); | |
| dead_instructions.pop_back(); | |
| DCEInst(inst, [&dead_instructions](Instruction* other_inst) { | |
| auto i = std::find(dead_instructions.begin(), dead_instructions.end(), | |
| other_inst); | |
| if (i != dead_instructions.end()) { | |
| dead_instructions.erase(i); | |
| } | |
| }); | |
| } | |
| return modified; | |
| } | |
| Pass::Status DeadInsertElimPass::Process() { | |
| // Process all entry point functions. | |
| ProcessFunction pfn = [this](Function* fp) { | |
| return EliminateDeadInserts(fp); | |
| }; | |
| bool modified = context()->ProcessReachableCallTree(pfn); | |
| return modified ? Status::SuccessWithChange : Status::SuccessWithoutChange; | |
| } | |
| } // namespace opt | |
| } // namespace spvtools |