| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=sandybridge -instruction-tables < %s | FileCheck %s |
| |
| addsubpd %xmm0, %xmm2 |
| addsubpd (%rax), %xmm2 |
| |
| addsubps %xmm0, %xmm2 |
| addsubps (%rax), %xmm2 |
| |
| haddpd %xmm0, %xmm2 |
| haddpd (%rax), %xmm2 |
| |
| haddps %xmm0, %xmm2 |
| haddps (%rax), %xmm2 |
| |
| hsubpd %xmm0, %xmm2 |
| hsubpd (%rax), %xmm2 |
| |
| hsubps %xmm0, %xmm2 |
| hsubps (%rax), %xmm2 |
| |
| lddqu (%rax), %xmm2 |
| |
| movddup %xmm0, %xmm2 |
| movddup (%rax), %xmm2 |
| |
| movshdup %xmm0, %xmm2 |
| movshdup (%rax), %xmm2 |
| |
| movsldup %xmm0, %xmm2 |
| movsldup (%rax), %xmm2 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 3 1.00 addsubpd %xmm0, %xmm2 |
| # CHECK-NEXT: 2 9 1.00 * addsubpd (%rax), %xmm2 |
| # CHECK-NEXT: 1 3 1.00 addsubps %xmm0, %xmm2 |
| # CHECK-NEXT: 2 9 1.00 * addsubps (%rax), %xmm2 |
| # CHECK-NEXT: 3 5 2.00 haddpd %xmm0, %xmm2 |
| # CHECK-NEXT: 4 11 2.00 * haddpd (%rax), %xmm2 |
| # CHECK-NEXT: 3 5 2.00 haddps %xmm0, %xmm2 |
| # CHECK-NEXT: 4 11 2.00 * haddps (%rax), %xmm2 |
| # CHECK-NEXT: 3 5 2.00 hsubpd %xmm0, %xmm2 |
| # CHECK-NEXT: 4 11 2.00 * hsubpd (%rax), %xmm2 |
| # CHECK-NEXT: 3 5 2.00 hsubps %xmm0, %xmm2 |
| # CHECK-NEXT: 4 11 2.00 * hsubps (%rax), %xmm2 |
| # CHECK-NEXT: 1 6 0.50 * lddqu (%rax), %xmm2 |
| # CHECK-NEXT: 1 1 1.00 movddup %xmm0, %xmm2 |
| # CHECK-NEXT: 1 6 0.50 * movddup (%rax), %xmm2 |
| # CHECK-NEXT: 1 1 1.00 movshdup %xmm0, %xmm2 |
| # CHECK-NEXT: 1 6 0.50 * movshdup (%rax), %xmm2 |
| # CHECK-NEXT: 1 1 1.00 movsldup %xmm0, %xmm2 |
| # CHECK-NEXT: 1 6 0.50 * movsldup (%rax), %xmm2 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - SBDivider |
| # CHECK-NEXT: [1] - SBFPDivider |
| # CHECK-NEXT: [2] - SBPort0 |
| # CHECK-NEXT: [3] - SBPort1 |
| # CHECK-NEXT: [4] - SBPort4 |
| # CHECK-NEXT: [5] - SBPort5 |
| # CHECK-NEXT: [6.0] - SBPort23 |
| # CHECK-NEXT: [6.1] - SBPort23 |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] |
| # CHECK-NEXT: - - - 12.00 - 19.00 5.00 5.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions: |
| # CHECK-NEXT: - - - 1.00 - - - - addsubpd %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - - 0.50 0.50 addsubpd (%rax), %xmm2 |
| # CHECK-NEXT: - - - 1.00 - - - - addsubps %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - - 0.50 0.50 addsubps (%rax), %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 - - haddpd %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 0.50 0.50 haddpd (%rax), %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 - - haddps %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 0.50 0.50 haddps (%rax), %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 - - hsubpd %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 0.50 0.50 hsubpd (%rax), %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 - - hsubps %xmm0, %xmm2 |
| # CHECK-NEXT: - - - 1.00 - 2.00 0.50 0.50 hsubps (%rax), %xmm2 |
| # CHECK-NEXT: - - - - - - 0.50 0.50 lddqu (%rax), %xmm2 |
| # CHECK-NEXT: - - - - - 1.00 - - movddup %xmm0, %xmm2 |
| # CHECK-NEXT: - - - - - - 0.50 0.50 movddup (%rax), %xmm2 |
| # CHECK-NEXT: - - - - - 1.00 - - movshdup %xmm0, %xmm2 |
| # CHECK-NEXT: - - - - - - 0.50 0.50 movshdup (%rax), %xmm2 |
| # CHECK-NEXT: - - - - - 1.00 - - movsldup %xmm0, %xmm2 |
| # CHECK-NEXT: - - - - - - 0.50 0.50 movsldup (%rax), %xmm2 |
