| // Copyright (c) 2018 Google LLC. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Validates correctness of built-in variables. |
| |
| #include "source/val/validate.h" |
| |
| #include <functional> |
| #include <list> |
| #include <map> |
| #include <set> |
| #include <sstream> |
| #include <stack> |
| #include <string> |
| #include <unordered_map> |
| #include <vector> |
| |
| #include "source/diagnostic.h" |
| #include "source/opcode.h" |
| #include "source/spirv_target_env.h" |
| #include "source/util/bitutils.h" |
| #include "source/val/instruction.h" |
| #include "source/val/validation_state.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| // Returns a short textual description of the id defined by the given |
| // instruction. |
| std::string GetIdDesc(const Instruction& inst) { |
| std::ostringstream ss; |
| ss << "ID <" << inst.id() << "> (Op" << spvOpcodeString(inst.opcode()) << ")"; |
| return ss.str(); |
| } |
| |
| // Gets underlying data type which is |
| // - member type if instruction is OpTypeStruct |
| // (member index is taken from decoration). |
| // - data type if id creates a pointer. |
| // - type of the constant if instruction is OpConst or OpSpecConst. |
| // |
| // Fails in any other case. The function is based on built-ins allowed by |
| // the Vulkan spec. |
| // TODO: If non-Vulkan validation rules are added then it might need |
| // to be refactored. |
| spv_result_t GetUnderlyingType(ValidationState_t& _, |
| const Decoration& decoration, |
| const Instruction& inst, |
| uint32_t* underlying_type) { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| if (inst.opcode() != SpvOpTypeStruct) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << "Attempted to get underlying data type via member index for " |
| "non-struct type."; |
| } |
| *underlying_type = inst.word(decoration.struct_member_index() + 2); |
| return SPV_SUCCESS; |
| } |
| |
| if (inst.opcode() == SpvOpTypeStruct) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << " did not find an member index to get underlying data type for " |
| "struct type."; |
| } |
| |
| if (spvOpcodeIsConstant(inst.opcode())) { |
| *underlying_type = inst.type_id(); |
| return SPV_SUCCESS; |
| } |
| |
| uint32_t storage_class = 0; |
| if (!_.GetPointerTypeInfo(inst.type_id(), underlying_type, &storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << GetIdDesc(inst) |
| << " is decorated with BuiltIn. BuiltIn decoration should only be " |
| "applied to struct types, variables and constants."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Returns Storage Class used by the instruction if applicable. |
| // Returns SpvStorageClassMax if not. |
| SpvStorageClass GetStorageClass(const Instruction& inst) { |
| switch (inst.opcode()) { |
| case SpvOpTypePointer: |
| case SpvOpTypeForwardPointer: { |
| return SpvStorageClass(inst.word(2)); |
| } |
| case SpvOpVariable: { |
| return SpvStorageClass(inst.word(3)); |
| } |
| case SpvOpGenericCastToPtrExplicit: { |
| return SpvStorageClass(inst.word(4)); |
| } |
| default: { break; } |
| } |
| return SpvStorageClassMax; |
| } |
| |
| bool IsBuiltInValidForWebGPU(SpvBuiltIn label) { |
| switch (label) { |
| case SpvBuiltInPosition: |
| case SpvBuiltInVertexIndex: |
| case SpvBuiltInInstanceIndex: |
| case SpvBuiltInFrontFacing: |
| case SpvBuiltInFragCoord: |
| case SpvBuiltInFragDepth: |
| case SpvBuiltInNumWorkgroups: |
| case SpvBuiltInWorkgroupSize: |
| case SpvBuiltInLocalInvocationId: |
| case SpvBuiltInGlobalInvocationId: |
| case SpvBuiltInLocalInvocationIndex: { |
| return true; |
| } |
| default: |
| break; |
| } |
| |
| return false; |
| } |
| |
| // Helper class managing validation of built-ins. |
| // TODO: Generic functionality of this class can be moved into |
| // ValidationState_t to be made available to other users. |
| class BuiltInsValidator { |
| public: |
| BuiltInsValidator(ValidationState_t& vstate) : _(vstate) {} |
| |
| // Run validation. |
| spv_result_t Run(); |
| |
| private: |
| // Goes through all decorations in the module, if decoration is BuiltIn |
| // calls ValidateSingleBuiltInAtDefinition(). |
| spv_result_t ValidateBuiltInsAtDefinition(); |
| |
| // Validates the instruction defining an id with built-in decoration. |
| // Can be called multiple times for the same id, if multiple built-ins are |
| // specified. Seeds id_to_at_reference_checks_ with decorated ids if needed. |
| spv_result_t ValidateSingleBuiltInAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| // The following section contains functions which are called when id defined |
| // by |inst| is decorated with BuiltIn |decoration|. |
| // Most functions are specific to a single built-in and have naming scheme: |
| // ValidateXYZAtDefinition. Some functions are common to multiple kinds of |
| // BuiltIn. |
| spv_result_t ValidateClipOrCullDistanceAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateFragCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFragDepthAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateFrontFacingAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateHelperInvocationAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateInvocationIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateInstanceIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateLayerOrViewportIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidatePatchVerticesAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePointCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePointSizeAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePositionAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidatePrimitiveIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSampleIdAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSampleMaskAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateSamplePositionAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessCoordAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessLevelOuterAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateTessLevelInnerAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateVertexIndexAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| spv_result_t ValidateVertexIdOrInstanceIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateLocalInvocationIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateWorkgroupSizeAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for GlobalInvocationId, LocalInvocationId, NumWorkgroups, WorkgroupId. |
| spv_result_t ValidateComputeShaderI32Vec3InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst); |
| spv_result_t ValidateSMBuiltinsAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| // Used for SubgroupEqMask, SubgroupGeMask, SubgroupGtMask, SubgroupLtMask, |
| // SubgroupLeMask. |
| spv_result_t ValidateI32Vec4InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for SubgroupLocalInvocationId, SubgroupSize. |
| spv_result_t ValidateI32InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| // Used for SubgroupId, NumSubgroups. |
| spv_result_t ValidateComputeI32InputAtDefinition(const Decoration& decoration, |
| const Instruction& inst); |
| |
| // The following section contains functions which are called when id defined |
| // by |referenced_inst| is |
| // 1. referenced by |referenced_from_inst| |
| // 2. dependent on |built_in_inst| which is decorated with BuiltIn |
| // |decoration|. Most functions are specific to a single built-in and have |
| // naming scheme: ValidateXYZAtReference. Some functions are common to |
| // multiple kinds of BuiltIn. |
| spv_result_t ValidateFragCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFragDepthAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateFrontFacingAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateHelperInvocationAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateInvocationIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateInstanceIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateInstanceIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePatchVerticesAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePointCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePointSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidatePrimitiveIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSampleIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSampleMaskAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSamplePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateTessCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateTessLevelAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateLocalInvocationIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateVertexIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateLayerOrViewportIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateWorkgroupSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateClipOrCullDistanceAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Used for GlobalInvocationId, LocalInvocationId, NumWorkgroups, WorkgroupId. |
| spv_result_t ValidateComputeShaderI32Vec3InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| // Used for SubgroupId and NumSubgroups. |
| spv_result_t ValidateComputeI32InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| spv_result_t ValidateSMBuiltinsAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // Validates that |built_in_inst| is not (even indirectly) referenced from |
| // within a function which can be called with |execution_model|. |
| // |
| // |comment| - text explaining why the restriction was imposed. |
| // |decoration| - BuiltIn decoration which causes the restriction. |
| // |referenced_inst| - instruction which is dependent on |built_in_inst| and |
| // defines the id which was referenced. |
| // |referenced_from_inst| - instruction which references id defined by |
| // |referenced_inst| from within a function. |
| spv_result_t ValidateNotCalledWithExecutionModel( |
| const char* comment, SpvExecutionModel execution_model, |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst); |
| |
| // The following section contains functions which check that the decorated |
| // variable has the type specified in the function name. |diag| would be |
| // called with a corresponding error message, if validation is not successful. |
| spv_result_t ValidateBool( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateI32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| spv_result_t ValidateF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| spv_result_t ValidateF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32VecHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| // If |num_components| is zero, the number of components is not checked. |
| spv_result_t ValidateF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateOptionalArrayedF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag); |
| spv_result_t ValidateF32ArrHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type); |
| |
| // Generates strings like "Member #0 of struct ID <2>". |
| std::string GetDefinitionDesc(const Decoration& decoration, |
| const Instruction& inst) const; |
| |
| // Generates strings like "ID <51> (OpTypePointer) is referencing ID <2> |
| // (OpTypeStruct) which is decorated with BuiltIn Position". |
| std::string GetReferenceDesc( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst, |
| SpvExecutionModel execution_model = SpvExecutionModelMax) const; |
| |
| // Generates strings like "ID <51> (OpTypePointer) uses storage class |
| // UniformConstant". |
| std::string GetStorageClassDesc(const Instruction& inst) const; |
| |
| // Updates inner working of the class. Is called sequentially for every |
| // instruction. |
| void Update(const Instruction& inst); |
| |
| ValidationState_t& _; |
| |
| // Mapping id -> list of rules which validate instruction referencing the |
| // id. Rules can create new rules and add them to this container. |
| // Using std::map, and not std::unordered_map to avoid iterator invalidation |
| // during rehashing. |
| std::map<uint32_t, std::list<std::function<spv_result_t(const Instruction&)>>> |
| id_to_at_reference_checks_; |
| |
| // Id of the function we are currently inside. 0 if not inside a function. |
| uint32_t function_id_ = 0; |
| |
| // Entry points which can (indirectly) call the current function. |
| // The pointer either points to a vector inside to function_to_entry_points_ |
| // or to no_entry_points_. The pointer is guaranteed to never be null. |
| const std::vector<uint32_t> no_entry_points; |
| const std::vector<uint32_t>* entry_points_ = &no_entry_points; |
| |
| // Execution models with which the current function can be called. |
| std::set<SpvExecutionModel> execution_models_; |
| }; |
| |
| void BuiltInsValidator::Update(const Instruction& inst) { |
| const SpvOp opcode = inst.opcode(); |
| if (opcode == SpvOpFunction) { |
| // Entering a function. |
| assert(function_id_ == 0); |
| function_id_ = inst.id(); |
| execution_models_.clear(); |
| entry_points_ = &_.FunctionEntryPoints(function_id_); |
| // Collect execution models from all entry points from which the current |
| // function can be called. |
| for (const uint32_t entry_point : *entry_points_) { |
| if (const auto* models = _.GetExecutionModels(entry_point)) { |
| execution_models_.insert(models->begin(), models->end()); |
| } |
| } |
| } |
| |
| if (opcode == SpvOpFunctionEnd) { |
| // Exiting a function. |
| assert(function_id_ != 0); |
| function_id_ = 0; |
| entry_points_ = &no_entry_points; |
| execution_models_.clear(); |
| } |
| } |
| |
| std::string BuiltInsValidator::GetDefinitionDesc( |
| const Decoration& decoration, const Instruction& inst) const { |
| std::ostringstream ss; |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| assert(inst.opcode() == SpvOpTypeStruct); |
| ss << "Member #" << decoration.struct_member_index(); |
| ss << " of struct ID <" << inst.id() << ">"; |
| } else { |
| ss << GetIdDesc(inst); |
| } |
| return ss.str(); |
| } |
| |
| std::string BuiltInsValidator::GetReferenceDesc( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, const Instruction& referenced_from_inst, |
| SpvExecutionModel execution_model) const { |
| std::ostringstream ss; |
| ss << GetIdDesc(referenced_from_inst) << " is referencing " |
| << GetIdDesc(referenced_inst); |
| if (built_in_inst.id() != referenced_inst.id()) { |
| ss << " which is dependent on " << GetIdDesc(built_in_inst); |
| } |
| |
| ss << " which is decorated with BuiltIn "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]); |
| if (function_id_) { |
| ss << " in function <" << function_id_ << ">"; |
| if (execution_model != SpvExecutionModelMax) { |
| ss << " called with execution model "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_EXECUTION_MODEL, |
| execution_model); |
| } |
| } |
| ss << "."; |
| return ss.str(); |
| } |
| |
| std::string BuiltInsValidator::GetStorageClassDesc( |
| const Instruction& inst) const { |
| std::ostringstream ss; |
| ss << GetIdDesc(inst) << " uses storage class "; |
| ss << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_STORAGE_CLASS, |
| GetStorageClass(inst)); |
| ss << "."; |
| return ss.str(); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateBool( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| if (!_.IsBoolScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not a bool scalar."); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateI32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedI32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == SpvOpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateI32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsIntScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an int scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has bit width " << bit_width |
| << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == SpvOpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateF32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32Helper(decoration, inst, diag, underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Helper( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsFloatScalarType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " is not a float scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has bit width " << bit_width |
| << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| if (!_.IsIntVectorType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an int vector."); |
| } |
| |
| const uint32_t actual_num_components = _.GetDimension(underlying_type); |
| if (_.GetDimension(underlying_type) != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip the array, if present. |
| if (_.GetIdOpcode(underlying_type) == SpvOpTypeArray) { |
| underlying_type = _.FindDef(underlying_type)->word(2u); |
| } |
| |
| return ValidateF32VecHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Vec( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32VecHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32VecHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| if (!_.IsFloatVectorType(underlying_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " is not a float vector."); |
| } |
| |
| const uint32_t actual_num_components = _.GetDimension(underlying_type); |
| if (_.GetDimension(underlying_type) != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(underlying_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| const Instruction* const type_inst = _.FindDef(underlying_type); |
| if (type_inst->opcode() != SpvOpTypeArray) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an array."); |
| } |
| |
| const uint32_t component_type = type_inst->word(2); |
| if (!_.IsIntScalarType(component_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " components are not int scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(component_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| return ValidateF32ArrHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateOptionalArrayedF32Arr( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag) { |
| uint32_t underlying_type = 0; |
| if (spv_result_t error = |
| GetUnderlyingType(_, decoration, inst, &underlying_type)) { |
| return error; |
| } |
| |
| // Strip an extra layer of arraying if present. |
| if (_.GetIdOpcode(underlying_type) == SpvOpTypeArray) { |
| uint32_t subtype = _.FindDef(underlying_type)->word(2u); |
| if (_.GetIdOpcode(subtype) == SpvOpTypeArray) { |
| underlying_type = subtype; |
| } |
| } |
| |
| return ValidateF32ArrHelper(decoration, inst, num_components, diag, |
| underlying_type); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateF32ArrHelper( |
| const Decoration& decoration, const Instruction& inst, |
| uint32_t num_components, |
| const std::function<spv_result_t(const std::string& message)>& diag, |
| uint32_t underlying_type) { |
| const Instruction* const type_inst = _.FindDef(underlying_type); |
| if (type_inst->opcode() != SpvOpTypeArray) { |
| return diag(GetDefinitionDesc(decoration, inst) + " is not an array."); |
| } |
| |
| const uint32_t component_type = type_inst->word(2); |
| if (!_.IsFloatScalarType(component_type)) { |
| return diag(GetDefinitionDesc(decoration, inst) + |
| " components are not float scalar."); |
| } |
| |
| const uint32_t bit_width = _.GetBitWidth(component_type); |
| if (bit_width != 32) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) |
| << " has components with bit width " << bit_width << "."; |
| return diag(ss.str()); |
| } |
| |
| if (num_components != 0) { |
| uint64_t actual_num_components = 0; |
| if (!_.GetConstantValUint64(type_inst->word(3), &actual_num_components)) { |
| assert(0 && "Array type definition is corrupt"); |
| } |
| if (actual_num_components != num_components) { |
| std::ostringstream ss; |
| ss << GetDefinitionDesc(decoration, inst) << " has " |
| << actual_num_components << " components."; |
| return diag(ss.str()); |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateNotCalledWithExecutionModel( |
| const char* comment, SpvExecutionModel execution_model, |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (function_id_) { |
| if (execution_models_.count(execution_model)) { |
| const char* execution_model_str = _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_EXECUTION_MODEL, execution_model); |
| const char* built_in_str = _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, decoration.params()[0]); |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << comment << " " << GetIdDesc(referenced_inst) << " depends on " |
| << GetIdDesc(built_in_inst) << " which is decorated with BuiltIn " |
| << built_in_str << "." |
| << " Id <" << referenced_inst.id() << "> is later referenced by " |
| << GetIdDesc(referenced_from_inst) << " in function <" |
| << function_id_ << "> which is called with execution model " |
| << execution_model_str << "."; |
| } |
| } else { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| comment, execution_model, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateClipOrCullDistanceAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidateClipOrCullDistanceAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateClipOrCullDistanceAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input or Output storage " |
| "class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassInput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Input storage class if execution model is " |
| "Vertex.", |
| SpvExecutionModelVertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| if (storage_class == SpvStorageClassOutput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance to be " |
| "used for variables with Output storage class if execution model is " |
| "Fragment.", |
| SpvExecutionModelFragment, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelFragment: |
| case SpvExecutionModelVertex: { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelMeshNV: { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The outer level of array is applied on the variable. |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32Arr( |
| decoration, built_in_inst, /* Any number of components */ 0, |
| [this, &decoration, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit float array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with Fragment, Vertex, " |
| "TessellationControl, TessellationEvaluation or Geometry " |
| "execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateClipOrCullDistanceAtReference, |
| this, decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 4, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FragCoord " |
| "variable needs to be a 4-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFragCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragCoord to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFragCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragDepthAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FragDepth " |
| "variable needs to be a 32-bit float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFragDepthAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFragDepthAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragDepth to be only used for " |
| "variables with Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FragDepth to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| |
| for (const uint32_t entry_point : *entry_points_) { |
| // Every entry point from which this function is called needs to have |
| // Execution Mode DepthReplacing. |
| const auto* modes = _.GetExecutionModes(entry_point); |
| if (!modes || !modes->count(SpvExecutionModeDepthReplacing)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec requires DepthReplacing execution mode to be " |
| "declared when using BuiltIn FragDepth. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFragDepthAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFrontFacingAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateBool( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn FrontFacing " |
| "variable needs to be a bool scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateFrontFacingAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateFrontFacingAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FrontFacing to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn FrontFacing to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateFrontFacingAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateHelperInvocationAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateBool( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn HelperInvocation " |
| "variable needs to be a bool scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateHelperInvocationAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateHelperInvocationAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn HelperInvocation to be only used " |
| "for variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn HelperInvocation to be used only " |
| "with Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateHelperInvocationAtReference, this, |
| decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInvocationIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn InvocationId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateInvocationIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInvocationIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn InvocationId to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelTessellationControl && |
| execution_model != SpvExecutionModelGeometry) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn InvocationId to be used only " |
| "with TessellationControl or Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateInvocationIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInstanceIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn InstanceIndex " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateInstanceIndexAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInstanceIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn InstanceIndex to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelVertex) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn InstanceIndex to be used only " |
| "with Vertex execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateInstanceIndexAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePatchVerticesAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn PatchVertices " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePatchVerticesAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePatchVerticesAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PatchVertices to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelTessellationControl && |
| execution_model != SpvExecutionModelTessellationEvaluation) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PatchVertices to be used only " |
| "with TessellationControl or TessellationEvaluation " |
| "execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePatchVerticesAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn PointCoord " |
| "variable needs to be a 2-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePointCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PointCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PointCoord to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePointCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointSizeAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidatePointSizeAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePointSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PointSize to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassInput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn PointSize to be used for " |
| "variables with Input storage class if execution model is Vertex.", |
| SpvExecutionModelVertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelVertex: { |
| if (spv_result_t error = ValidateF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn PointSize " |
| "variable needs to be a 32-bit float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelMeshNV: { |
| // PointSize can be a per-vertex variable for tessellation control, |
| // tessellation evaluation and geometry shader stages. In such cases |
| // variables will have an array of 32-bit floats. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The array is on the variable, so this must be a 32-bit float. |
| if (spv_result_t error = ValidateF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn " |
| "PointSize variable needs to be a 32-bit " |
| "float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32( |
| decoration, built_in_inst, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn " |
| "PointSize variable needs to be a 32-bit " |
| "float scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PointSize to be used only with " |
| "Vertex, TessellationControl, TessellationEvaluation or " |
| "Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePointSizeAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePositionAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| // Seed at reference checks with this built-in. |
| return ValidatePositionAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn Position to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassInput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn Position to be used for variables " |
| "with Input storage class if execution model is Vertex.", |
| SpvExecutionModelVertex, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelVertex: { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| case SpvExecutionModelMeshNV: { |
| // Position can be a per-vertex variable for tessellation control, |
| // tessellation evaluation, geometry and mesh shader stages. In such |
| // cases variables will have an array of 4-component 32-bit float |
| // vectors. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // The array is on the variable, so this must be a 4-component |
| // 32-bit float vector. |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit " |
| "float vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, |
| &referenced_from_inst) |
| << "According to the Vulkan spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit " |
| "float vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn Position to be used only " |
| "with Vertex, TessellationControl, TessellationEvaluation" |
| " or Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (spvIsWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "WebGPU spec allows BuiltIn Position to be only used for " |
| "variables with Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelVertex: { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, built_in_inst, 4, |
| [this, &referenced_from_inst]( |
| const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "According to the WebGPU spec BuiltIn Position " |
| "variable needs to be a 4-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| break; |
| } |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "WebGPU spec allows BuiltIn Position to be used only " |
| "with the Vertex execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePositionAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePrimitiveIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| // PrimitiveId can be a per-primitive variable for mesh shader stage. |
| // In such cases variable will have an array of 32-bit integers. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // This must be a 32-bit int scalar. |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn PrimitiveId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn PrimitiveId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidatePrimitiveIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidatePrimitiveIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PrimitiveId to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassOutput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "TessellationControl.", |
| SpvExecutionModelTessellationControl, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "TessellationEvaluation.", |
| SpvExecutionModelTessellationEvaluation, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn PrimitiveId to be used for " |
| "variables with Output storage class if execution model is " |
| "Fragment.", |
| SpvExecutionModelFragment, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelFragment: |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelMeshNV: |
| case SpvExecutionModelRayGenerationNV: |
| case SpvExecutionModelIntersectionNV: |
| case SpvExecutionModelAnyHitNV: |
| case SpvExecutionModelClosestHitNV: |
| case SpvExecutionModelMissNV: |
| case SpvExecutionModelCallableNV: { |
| // Ok. |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn PrimitiveId to be used only " |
| "with Fragment, TessellationControl, " |
| "TessellationEvaluation or Geometry execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidatePrimitiveIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn SampleId " |
| "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSampleIdAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SampleId to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SampleId to be used only with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSampleIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleMaskAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32Arr( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn SampleMask " |
| "variable needs to be a 32-bit int array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSampleMaskAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSampleMaskAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SampleMask to be only used for " |
| "variables with Input or Output storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SampleMask to be used only " |
| "with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSampleMaskAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSamplePositionAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn SamplePosition " |
| "variable needs to be a 2-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSamplePositionAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSamplePositionAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SamplePosition to be only used " |
| "for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelFragment) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn SamplePosition to be used only " |
| "with " |
| "Fragment execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSamplePositionAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessCoordAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Vec( |
| decoration, inst, 3, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn TessCoord " |
| "variable needs to be a 3-component 32-bit float " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessCoordAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessCoordAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn TessCoord to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelTessellationEvaluation) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn TessCoord to be used only with " |
| "TessellationEvaluation execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateTessCoordAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelOuterAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, inst, 4, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn TessLevelOuter " |
| "variable needs to be a 4-component 32-bit float " |
| "array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessLevelAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelInnerAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateF32Arr( |
| decoration, inst, 2, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn TessLevelOuter " |
| "variable needs to be a 2-component 32-bit float " |
| "array. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateTessLevelAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateTessLevelAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input or Output storage " |
| "class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassInput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used " |
| "for variables with Input storage class if execution model is " |
| "TessellationControl.", |
| SpvExecutionModelTessellationControl, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| if (storage_class == SpvStorageClassOutput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used " |
| "for variables with Output storage class if execution model is " |
| "TessellationEvaluation.", |
| SpvExecutionModelTessellationEvaluation, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: { |
| // Ok. |
| break; |
| } |
| |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with TessellationControl or " |
| "TessellationEvaluation execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateTessLevelAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateVertexIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn VertexIndex variable needs to be a " |
| "32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateVertexIndexAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateVertexIdOrInstanceIdAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| const SpvBuiltIn label = SpvBuiltIn(decoration.params()[0]); |
| bool allow_instance_id = _.HasCapability(SpvCapabilityRayTracingNV) && |
| label == SpvBuiltInInstanceId; |
| if (spvIsVulkanEnv(_.context()->target_env) && !allow_instance_id) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "Vulkan spec doesn't allow BuiltIn VertexId/InstanceId " |
| "to be used."; |
| } |
| |
| if (label == SpvBuiltInInstanceId) { |
| return ValidateInstanceIdAtReference(decoration, inst, inst, inst); |
| } |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateInstanceIdAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelIntersectionNV: |
| case SpvExecutionModelClosestHitNV: |
| case SpvExecutionModelAnyHitNV: |
| // Do nothing, valid stages |
| break; |
| default: |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn InstanceId to be used " |
| "only with IntersectionNV, ClosestHitNV and AnyHitNV " |
| "execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst); |
| break; |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateInstanceIdAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateLocalInvocationIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the WebGPU spec BuiltIn " |
| "LocalInvocationIndex variable needs to be a 32-bit " |
| "int." |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateLocalInvocationIndexAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateLocalInvocationIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "WebGPU spec allows BuiltIn LocalInvocationIndex to be only " |
| "used for variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelGLCompute) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "WebGPU spec allows BuiltIn VertexIndex to be used only " |
| "with GLCompute execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateLocalInvocationIndexAtReference, |
| this, decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateVertexIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn VertexIndex to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelVertex) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn VertexIndex to be used only with " |
| "Vertex execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateVertexIndexAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateLayerOrViewportIndexAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| // This can be a per-primitive variable for mesh shader stage. |
| // In such cases variable will have an array of 32-bit integers. |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| // This must be a 32-bit int scalar. |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, decoration.params()[0]) |
| << "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } else { |
| if (spv_result_t error = ValidateOptionalArrayedI32( |
| decoration, inst, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the Vulkan spec BuiltIn " |
| << _.grammar().lookupOperandName( |
| SPV_OPERAND_TYPE_BUILT_IN, decoration.params()[0]) |
| << "variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateLayerOrViewportIndexAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateLayerOrViewportIndexAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput && |
| storage_class != SpvStorageClassOutput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input or Output storage " |
| "class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| if (storage_class == SpvStorageClassInput) { |
| assert(function_id_ == 0); |
| for (const auto em : |
| {SpvExecutionModelVertex, SpvExecutionModelTessellationEvaluation, |
| SpvExecutionModelGeometry}) { |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateNotCalledWithExecutionModel, |
| this, |
| "Vulkan spec doesn't allow BuiltIn Layer and " |
| "ViewportIndex to be " |
| "used for variables with Input storage class if " |
| "execution model is Vertex, TessellationEvaluation, or " |
| "Geometry.", |
| em, decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| } |
| |
| if (storage_class == SpvStorageClassOutput) { |
| assert(function_id_ == 0); |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateNotCalledWithExecutionModel, this, |
| "Vulkan spec doesn't allow BuiltIn Layer and " |
| "ViewportIndex to be " |
| "used for variables with Output storage class if " |
| "execution model is " |
| "Fragment.", |
| SpvExecutionModelFragment, decoration, built_in_inst, |
| referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| switch (execution_model) { |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelFragment: |
| case SpvExecutionModelMeshNV: |
| // Ok. |
| break; |
| case SpvExecutionModelVertex: |
| case SpvExecutionModelTessellationEvaluation: { |
| if (!_.HasCapability(SpvCapabilityShaderViewportIndexLayerEXT)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Using BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " in Vertex or Tessellation execution model requires " |
| "the ShaderViewportIndexLayerEXT capability."; |
| } |
| break; |
| } |
| default: { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << "Vulkan spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with Vertex, TessellationEvaluation, " |
| "Geometry, or Fragment execution models. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateLayerOrViewportIndexAtReference, |
| this, decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateComputeShaderI32Vec3InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32Vec( |
| decoration, inst, 3, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 3-component 32-bit int " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateComputeShaderI32Vec3InputAtReference(decoration, inst, inst, |
| inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateComputeShaderI32Vec3InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| bool has_vulkan_model = execution_model == SpvExecutionModelGLCompute || |
| execution_model == SpvExecutionModelTaskNV || |
| execution_model == SpvExecutionModelMeshNV; |
| bool has_webgpu_model = execution_model == SpvExecutionModelGLCompute; |
| if ((spvIsVulkanEnv(_.context()->target_env) && !has_vulkan_model) || |
| (spvIsWebGPUEnv(_.context()->target_env) && !has_webgpu_model)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with GLCompute execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateComputeShaderI32Vec3InputAtReference, this, |
| decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateComputeI32InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " cannot be used as a member decoration "; |
| } |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit int " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateComputeI32InputAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateComputeI32InputAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| bool has_vulkan_model = execution_model == SpvExecutionModelGLCompute || |
| execution_model == SpvExecutionModelTaskNV || |
| execution_model == SpvExecutionModelMeshNV; |
| if (spvIsVulkanEnv(_.context()->target_env) && !has_vulkan_model) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with GLCompute execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back( |
| std::bind(&BuiltInsValidator::ValidateComputeI32InputAtReference, this, |
| decoration, built_in_inst, referenced_from_inst, |
| std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " cannot be used as a member decoration "; |
| } |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit int. " << message; |
| })) { |
| return error; |
| } |
| |
| const SpvStorageClass storage_class = GetStorageClass(inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input storage class. " |
| << GetReferenceDesc(decoration, inst, inst, inst) << " " |
| << GetStorageClassDesc(inst); |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateI32Vec4InputAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (decoration.struct_member_index() != Decoration::kInvalidMember) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " cannot be used as a member decoration "; |
| } |
| if (spv_result_t error = ValidateI32Vec( |
| decoration, inst, 4, |
| [this, &decoration, |
| &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 4-component 32-bit int " |
| "vector. " |
| << message; |
| })) { |
| return error; |
| } |
| |
| const SpvStorageClass storage_class = GetStorageClass(inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for variables with Input storage class. " |
| << GetReferenceDesc(decoration, inst, inst, inst) << " " |
| << GetStorageClassDesc(inst); |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateWorkgroupSizeAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| if (spvIsVulkanEnv(_.context()->target_env) && |
| !spvOpcodeIsConstant(inst.opcode())) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "Vulkan spec requires BuiltIn WorkgroupSize to be a " |
| "constant. " |
| << GetIdDesc(inst) << " is not a constant."; |
| } |
| |
| if (spv_result_t error = ValidateI32Vec( |
| decoration, inst, 3, |
| [this, &inst](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn WorkgroupSize variable needs to be a " |
| "3-component 32-bit int vector. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateWorkgroupSizeAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateWorkgroupSizeAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| for (const SpvExecutionModel execution_model : execution_models_) { |
| if (execution_model != SpvExecutionModelGLCompute) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be used only with GLCompute execution model. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst, execution_model); |
| } |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateWorkgroupSizeAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSMBuiltinsAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (spv_result_t error = ValidateI32( |
| decoration, inst, |
| [this, &inst, |
| &decoration](const std::string& message) -> spv_result_t { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "According to the " |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " variable needs to be a 32-bit int scalar. " |
| << message; |
| })) { |
| return error; |
| } |
| } |
| |
| // Seed at reference checks with this built-in. |
| return ValidateSMBuiltinsAtReference(decoration, inst, inst, inst); |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSMBuiltinsAtReference( |
| const Decoration& decoration, const Instruction& built_in_inst, |
| const Instruction& referenced_inst, |
| const Instruction& referenced_from_inst) { |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| const SpvStorageClass storage_class = GetStorageClass(referenced_from_inst); |
| if (storage_class != SpvStorageClassMax && |
| storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &referenced_from_inst) |
| << spvLogStringForEnv(_.context()->target_env) |
| << " spec allows BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]) |
| << " to be only used for " |
| "variables with Input storage class. " |
| << GetReferenceDesc(decoration, built_in_inst, referenced_inst, |
| referenced_from_inst) |
| << " " << GetStorageClassDesc(referenced_from_inst); |
| } |
| } |
| |
| if (function_id_ == 0) { |
| // Propagate this rule to all dependant ids in the global scope. |
| id_to_at_reference_checks_[referenced_from_inst.id()].push_back(std::bind( |
| &BuiltInsValidator::ValidateSMBuiltinsAtReference, this, decoration, |
| built_in_inst, referenced_from_inst, std::placeholders::_1)); |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateSingleBuiltInAtDefinition( |
| const Decoration& decoration, const Instruction& inst) { |
| const SpvBuiltIn label = SpvBuiltIn(decoration.params()[0]); |
| |
| // Builtins can only be applied to variables, structures or constants. |
| auto target_opcode = inst.opcode(); |
| if (target_opcode != SpvOpTypeStruct && target_opcode != SpvOpVariable && |
| !spvOpcodeIsConstant(target_opcode)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "BuiltIns can only target variables, structs or constants"; |
| } |
| |
| if (!spvIsVulkanOrWebGPUEnv(_.context()->target_env)) { |
| // Early return. All currently implemented rules are based on Vulkan or |
| // WebGPU spec. |
| // |
| // TODO: If you are adding validation rules for environments other than |
| // Vulkan or WebGPU (or general rules which are not environment |
| // independent), then you need to modify or remove this condition. Consider |
| // also adding early returns into BuiltIn-specific rules, so that the system |
| // doesn't spawn new rules which don't do anything. |
| return SPV_SUCCESS; |
| } |
| |
| if (spvIsWebGPUEnv(_.context()->target_env) && |
| !IsBuiltInValidForWebGPU(label)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, &inst) |
| << "WebGPU does not allow BuiltIn " |
| << _.grammar().lookupOperandName(SPV_OPERAND_TYPE_BUILT_IN, |
| decoration.params()[0]); |
| } |
| |
| // If you are adding a new BuiltIn enum, please register it here. |
| // If the newly added enum has validation rules associated with it |
| // consider leaving a TODO and/or creating an issue. |
| switch (label) { |
| case SpvBuiltInClipDistance: |
| case SpvBuiltInCullDistance: { |
| return ValidateClipOrCullDistanceAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInFragCoord: { |
| return ValidateFragCoordAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInFragDepth: { |
| return ValidateFragDepthAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInFrontFacing: { |
| return ValidateFrontFacingAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInGlobalInvocationId: |
| case SpvBuiltInLocalInvocationId: |
| case SpvBuiltInNumWorkgroups: |
| case SpvBuiltInWorkgroupId: { |
| return ValidateComputeShaderI32Vec3InputAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInHelperInvocation: { |
| return ValidateHelperInvocationAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInInvocationId: { |
| return ValidateInvocationIdAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInInstanceIndex: { |
| return ValidateInstanceIndexAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInLayer: |
| case SpvBuiltInViewportIndex: { |
| return ValidateLayerOrViewportIndexAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInPatchVertices: { |
| return ValidatePatchVerticesAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInPointCoord: { |
| return ValidatePointCoordAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInPointSize: { |
| return ValidatePointSizeAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInPosition: { |
| return ValidatePositionAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInPrimitiveId: { |
| return ValidatePrimitiveIdAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSampleId: { |
| return ValidateSampleIdAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSampleMask: { |
| return ValidateSampleMaskAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSamplePosition: { |
| return ValidateSamplePositionAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSubgroupId: |
| case SpvBuiltInNumSubgroups: { |
| return ValidateComputeI32InputAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSubgroupLocalInvocationId: |
| case SpvBuiltInSubgroupSize: { |
| return ValidateI32InputAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInSubgroupEqMask: |
| case SpvBuiltInSubgroupGeMask: |
| case SpvBuiltInSubgroupGtMask: |
| case SpvBuiltInSubgroupLeMask: |
| case SpvBuiltInSubgroupLtMask: { |
| return ValidateI32Vec4InputAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInTessCoord: { |
| return ValidateTessCoordAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInTessLevelOuter: { |
| return ValidateTessLevelOuterAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInTessLevelInner: { |
| return ValidateTessLevelInnerAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInVertexIndex: { |
| return ValidateVertexIndexAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInWorkgroupSize: { |
| return ValidateWorkgroupSizeAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInVertexId: |
| case SpvBuiltInInstanceId: { |
| return ValidateVertexIdOrInstanceIdAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInLocalInvocationIndex: { |
| return ValidateLocalInvocationIndexAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInWarpsPerSMNV: |
| case SpvBuiltInSMCountNV: |
| case SpvBuiltInWarpIDNV: |
| case SpvBuiltInSMIDNV: { |
| return ValidateSMBuiltinsAtDefinition(decoration, inst); |
| } |
| case SpvBuiltInWorkDim: |
| case SpvBuiltInGlobalSize: |
| case SpvBuiltInEnqueuedWorkgroupSize: |
| case SpvBuiltInGlobalOffset: |
| case SpvBuiltInGlobalLinearId: |
| case SpvBuiltInSubgroupMaxSize: |
| case SpvBuiltInNumEnqueuedSubgroups: |
| case SpvBuiltInBaseVertex: |
| case SpvBuiltInBaseInstance: |
| case SpvBuiltInDrawIndex: |
| case SpvBuiltInDeviceIndex: |
| case SpvBuiltInViewIndex: |
| case SpvBuiltInBaryCoordNoPerspAMD: |
| case SpvBuiltInBaryCoordNoPerspCentroidAMD: |
| case SpvBuiltInBaryCoordNoPerspSampleAMD: |
| case SpvBuiltInBaryCoordSmoothAMD: |
| case SpvBuiltInBaryCoordSmoothCentroidAMD: |
| case SpvBuiltInBaryCoordSmoothSampleAMD: |
| case SpvBuiltInBaryCoordPullModelAMD: |
| case SpvBuiltInFragStencilRefEXT: |
| case SpvBuiltInViewportMaskNV: |
| case SpvBuiltInSecondaryPositionNV: |
| case SpvBuiltInSecondaryViewportMaskNV: |
| case SpvBuiltInPositionPerViewNV: |
| case SpvBuiltInViewportMaskPerViewNV: |
| case SpvBuiltInFullyCoveredEXT: |
| case SpvBuiltInMax: |
| case SpvBuiltInTaskCountNV: |
| case SpvBuiltInPrimitiveCountNV: |
| case SpvBuiltInPrimitiveIndicesNV: |
| case SpvBuiltInClipDistancePerViewNV: |
| case SpvBuiltInCullDistancePerViewNV: |
| case SpvBuiltInLayerPerViewNV: |
| case SpvBuiltInMeshViewCountNV: |
| case SpvBuiltInMeshViewIndicesNV: |
| case SpvBuiltInBaryCoordNV: |
| case SpvBuiltInBaryCoordNoPerspNV: |
| case SpvBuiltInFragmentSizeNV: // alias SpvBuiltInFragSizeEXT |
| case SpvBuiltInInvocationsPerPixelNV: // alias |
| // SpvBuiltInFragInvocationCountEXT |
| case SpvBuiltInLaunchIdNV: |
| case SpvBuiltInLaunchSizeNV: |
| case SpvBuiltInWorldRayOriginNV: |
| case SpvBuiltInWorldRayDirectionNV: |
| case SpvBuiltInObjectRayOriginNV: |
| case SpvBuiltInObjectRayDirectionNV: |
| case SpvBuiltInRayTminNV: |
| case SpvBuiltInRayTmaxNV: |
| case SpvBuiltInInstanceCustomIndexNV: |
| case SpvBuiltInObjectToWorldNV: |
| case SpvBuiltInWorldToObjectNV: |
| case SpvBuiltInHitTNV: |
| case SpvBuiltInHitKindNV: |
| case SpvBuiltInIncomingRayFlagsNV: { |
| // No validation rules (for the moment). |
| break; |
| } |
| } |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::ValidateBuiltInsAtDefinition() { |
| for (const auto& kv : _.id_decorations()) { |
| const uint32_t id = kv.first; |
| const auto& decorations = kv.second; |
| if (decorations.empty()) { |
| continue; |
| } |
| |
| const Instruction* inst = _.FindDef(id); |
| assert(inst); |
| |
| for (const auto& decoration : kv.second) { |
| if (decoration.dec_type() != SpvDecorationBuiltIn) { |
| continue; |
| } |
| |
| if (spv_result_t error = |
| ValidateSingleBuiltInAtDefinition(decoration, *inst)) { |
| return error; |
| } |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t BuiltInsValidator::Run() { |
| // First pass: validate all built-ins at definition and seed |
| // id_to_at_reference_checks_ with built-ins. |
| if (auto error = ValidateBuiltInsAtDefinition()) { |
| return error; |
| } |
| |
| if (id_to_at_reference_checks_.empty()) { |
| // No validation tasks were seeded. Nothing else to do. |
| return SPV_SUCCESS; |
| } |
| |
| // Second pass: validate every id reference in the module using |
| // rules in id_to_at_reference_checks_. |
| for (const Instruction& inst : _.ordered_instructions()) { |
| Update(inst); |
| |
| std::set<uint32_t> already_checked; |
| |
| for (const auto& operand : inst.operands()) { |
| if (!spvIsIdType(operand.type)) { |
| // Not id. |
| continue; |
| } |
| |
| const uint32_t id = inst.word(operand.offset); |
| if (id == inst.id()) { |
| // No need to check result id. |
| continue; |
| } |
| |
| if (!already_checked.insert(id).second) { |
| // The instruction has already referenced this id. |
| continue; |
| } |
| |
| // Instruction references the id. Run all checks associated with the id |
| // on the instruction. id_to_at_reference_checks_ can be modified in the |
| // process, iterators are safe because it's a tree-based map. |
| const auto it = id_to_at_reference_checks_.find(id); |
| if (it != id_to_at_reference_checks_.end()) { |
| for (const auto& check : it->second) { |
| if (spv_result_t error = check(inst)) { |
| return error; |
| } |
| } |
| } |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace |
| |
| // Validates correctness of built-in variables. |
| spv_result_t ValidateBuiltIns(ValidationState_t& _) { |
| BuiltInsValidator validator(_); |
| return validator.Run(); |
| } |
| |
| } // namespace val |
| } // namespace spvtools |
