blob: 2f0d4e9f2579623af964b48ed17a45fe355085ed [file] [log] [blame]
; RUN: llc -mtriple=riscv32 -mattr=+c -filetype=obj \
; RUN: -disable-block-placement < %s \
; RUN: | llvm-objdump -d -triple=riscv32 -mattr=+c -riscv-no-aliases - \
; RUN: | FileCheck -check-prefix=RV32IC %s
; This acts as a sanity check for the codegen instruction compression path,
; verifying that the assembled file contains compressed instructions when
; expected. Handling of the compressed ISA is implemented so the same
; transformation patterns should be used whether compressing an input .s file or
; compressing codegen output. This file contains sanity checks to ensure that is
; working as expected. Particular care should be taken to test pseudo
; instructions.
; Note: TODOs in this file are only appropriate if they highlight a case where
; a generated instruction that can be compressed by an existing pattern isn't.
; It may be useful to have tests that indicate where better compression would be
; possible if alternative codegen choices were made, but they belong in a
; different test file.
define i32 @simple_arith(i32 %a, i32 %b) nounwind {
; RV32IC-LABEL: simple_arith:
; RV32IC: c.srai a1, 9
; RV32IC-NEXT: addi a2, a0, 1
; RV32IC-NEXT: c.andi a2, 11
; RV32IC-NEXT: c.slli a2, 7
; RV32IC-NEXT: c.add a1, a2
; RV32IC-NEXT: sub a0, a1, a0
; RV32IC-NEXT: c.jr ra
%1 = add i32 %a, 1
%2 = and i32 %1, 11
%3 = shl i32 %2, 7
%4 = ashr i32 %b, 9
%5 = add i32 %3, %4
%6 = sub i32 %5, %a
ret i32 %6
}
define i32 @select(i32 %a, i32 *%b) nounwind {
; RV32IC-LABEL: select:
; RV32IC: c.lw a2, 0(a1)
; RV32IC-NEXT: c.beqz a2, 4
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: c.bnez a2, 4
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: bltu a2, a0, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: bgeu a0, a2, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: bltu a0, a2, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: bgeu a2, a0, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: blt a2, a0, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: bge a0, a2, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a2, 0(a1)
; RV32IC-NEXT: blt a0, a2, 6
; RV32IC-NEXT: c.mv a0, a2
; RV32IC-NEXT: c.lw a1, 0(a1)
; RV32IC-NEXT: bge a1, a0, 6
; RV32IC-NEXT: c.mv a0, a1
; RV32IC-NEXT: c.jr ra
%val1 = load volatile i32, i32* %b
%tst1 = icmp eq i32 0, %val1
%val2 = select i1 %tst1, i32 %a, i32 %val1
%val3 = load volatile i32, i32* %b
%tst2 = icmp ne i32 0, %val3
%val4 = select i1 %tst2, i32 %val2, i32 %val3
%val5 = load volatile i32, i32* %b
%tst3 = icmp ugt i32 %val4, %val5
%val6 = select i1 %tst3, i32 %val4, i32 %val5
%val7 = load volatile i32, i32* %b
%tst4 = icmp uge i32 %val6, %val7
%val8 = select i1 %tst4, i32 %val6, i32 %val7
%val9 = load volatile i32, i32* %b
%tst5 = icmp ult i32 %val8, %val9
%val10 = select i1 %tst5, i32 %val8, i32 %val9
%val11 = load volatile i32, i32* %b
%tst6 = icmp ule i32 %val10, %val11
%val12 = select i1 %tst6, i32 %val10, i32 %val11
%val13 = load volatile i32, i32* %b
%tst7 = icmp sgt i32 %val12, %val13
%val14 = select i1 %tst7, i32 %val12, i32 %val13
%val15 = load volatile i32, i32* %b
%tst8 = icmp sge i32 %val14, %val15
%val16 = select i1 %tst8, i32 %val14, i32 %val15
%val17 = load volatile i32, i32* %b
%tst9 = icmp slt i32 %val16, %val17
%val18 = select i1 %tst9, i32 %val16, i32 %val17
%val19 = load volatile i32, i32* %b
%tst10 = icmp sle i32 %val18, %val19
%val20 = select i1 %tst10, i32 %val18, i32 %val19
ret i32 %val20
}
define i32 @pos_tiny() nounwind {
; RV32IC-LABEL: pos_tiny:
; RV32IC: c.li a0, 18
; RV32IC-NEXT: c.jr ra
ret i32 18
}
define i32 @pos_i32() nounwind {
; RV32IC-LABEL: pos_i32:
; RV32IC: lui a0, 423811
; RV32IC-NEXT: addi a0, a0, -1297
; RV32IC-NEXT: c.jr ra
ret i32 1735928559
}
define i32 @pos_i32_half_compressible() nounwind {
; RV32IC-LABEL: pos_i32_half_compressible:
; RV32IC: lui a0, 423810
; RV32IC-NEXT: c.addi a0, 28
; RV32IC-NEXT: c.jr ra
ret i32 1735925788
}
define i32 @neg_tiny() nounwind {
; RV32IC-LABEL: neg_tiny:
; RV32IC: c.li a0, -19
; RV32IC-NEXT: c.jr ra
ret i32 -19
}
define i32 @neg_i32() nounwind {
; RV32IC-LABEL: neg_i32:
; RV32IC: lui a0, 912092
; RV32IC-NEXT: addi a0, a0, -273
; RV32IC-NEXT: c.jr ra
ret i32 -559038737
}
define i32 @pos_i32_hi20_only() nounwind {
; RV32IC-LABEL: pos_i32_hi20_only:
; RV32IC: c.lui a0, 16
; RV32IC-NEXT: c.jr ra
ret i32 65536
}
define i32 @neg_i32_hi20_only() nounwind {
; RV32IC-LABEL: neg_i32_hi20_only:
; RV32IC: c.lui a0, 1048560
; RV32IC-NEXT: c.jr ra
ret i32 -65536
}