| //===- InstructionSimplify.cpp - Fold instruction operands ----------------===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file implements routines for folding instructions into simpler forms |
| // that do not require creating new instructions. This does constant folding |
| // ("add i32 1, 1" -> "2") but can also handle non-constant operands, either |
| // returning a constant ("and i32 %x, 0" -> "0") or an already existing value |
| // ("and i32 %x, %x" -> "%x"). All operands are assumed to have already been |
| // simplified: This is usually true and assuming it simplifies the logic (if |
| // they have not been simplified then results are correct but maybe suboptimal). |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/Analysis/InstructionSimplify.h" |
| #include "llvm/ADT/SetVector.h" |
| #include "llvm/ADT/Statistic.h" |
| #include "llvm/Analysis/AliasAnalysis.h" |
| #include "llvm/Analysis/AssumptionCache.h" |
| #include "llvm/Analysis/CaptureTracking.h" |
| #include "llvm/Analysis/CmpInstAnalysis.h" |
| #include "llvm/Analysis/ConstantFolding.h" |
| #include "llvm/Analysis/LoopAnalysisManager.h" |
| #include "llvm/Analysis/MemoryBuiltins.h" |
| #include "llvm/Analysis/ValueTracking.h" |
| #include "llvm/Analysis/VectorUtils.h" |
| #include "llvm/IR/ConstantRange.h" |
| #include "llvm/IR/DataLayout.h" |
| #include "llvm/IR/Dominators.h" |
| #include "llvm/IR/GetElementPtrTypeIterator.h" |
| #include "llvm/IR/GlobalAlias.h" |
| #include "llvm/IR/Operator.h" |
| #include "llvm/IR/PatternMatch.h" |
| #include "llvm/IR/ValueHandle.h" |
| #include "llvm/Support/KnownBits.h" |
| #include <algorithm> |
| using namespace llvm; |
| using namespace llvm::PatternMatch; |
| |
| #define DEBUG_TYPE "instsimplify" |
| |
| enum { RecursionLimit = 3 }; |
| |
| STATISTIC(NumExpand, "Number of expansions"); |
| STATISTIC(NumReassoc, "Number of reassociations"); |
| |
| static Value *SimplifyAndInst(Value *, Value *, const SimplifyQuery &, unsigned); |
| static Value *SimplifyBinOp(unsigned, Value *, Value *, const SimplifyQuery &, |
| unsigned); |
| static Value *SimplifyFPBinOp(unsigned, Value *, Value *, const FastMathFlags &, |
| const SimplifyQuery &, unsigned); |
| static Value *SimplifyCmpInst(unsigned, Value *, Value *, const SimplifyQuery &, |
| unsigned); |
| static Value *SimplifyICmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse); |
| static Value *SimplifyOrInst(Value *, Value *, const SimplifyQuery &, unsigned); |
| static Value *SimplifyXorInst(Value *, Value *, const SimplifyQuery &, unsigned); |
| static Value *SimplifyCastInst(unsigned, Value *, Type *, |
| const SimplifyQuery &, unsigned); |
| static Value *SimplifyGEPInst(Type *, ArrayRef<Value *>, const SimplifyQuery &, |
| unsigned); |
| |
| static Value *foldSelectWithBinaryOp(Value *Cond, Value *TrueVal, |
| Value *FalseVal) { |
| BinaryOperator::BinaryOps BinOpCode; |
| if (auto *BO = dyn_cast<BinaryOperator>(Cond)) |
| BinOpCode = BO->getOpcode(); |
| else |
| return nullptr; |
| |
| CmpInst::Predicate ExpectedPred, Pred1, Pred2; |
| if (BinOpCode == BinaryOperator::Or) { |
| ExpectedPred = ICmpInst::ICMP_NE; |
| } else if (BinOpCode == BinaryOperator::And) { |
| ExpectedPred = ICmpInst::ICMP_EQ; |
| } else |
| return nullptr; |
| |
| // %A = icmp eq %TV, %FV |
| // %B = icmp eq %X, %Y (and one of these is a select operand) |
| // %C = and %A, %B |
| // %D = select %C, %TV, %FV |
| // --> |
| // %FV |
| |
| // %A = icmp ne %TV, %FV |
| // %B = icmp ne %X, %Y (and one of these is a select operand) |
| // %C = or %A, %B |
| // %D = select %C, %TV, %FV |
| // --> |
| // %TV |
| Value *X, *Y; |
| if (!match(Cond, m_c_BinOp(m_c_ICmp(Pred1, m_Specific(TrueVal), |
| m_Specific(FalseVal)), |
| m_ICmp(Pred2, m_Value(X), m_Value(Y)))) || |
| Pred1 != Pred2 || Pred1 != ExpectedPred) |
| return nullptr; |
| |
| if (X == TrueVal || X == FalseVal || Y == TrueVal || Y == FalseVal) |
| return BinOpCode == BinaryOperator::Or ? TrueVal : FalseVal; |
| |
| return nullptr; |
| } |
| |
| /// For a boolean type or a vector of boolean type, return false or a vector |
| /// with every element false. |
| static Constant *getFalse(Type *Ty) { |
| return ConstantInt::getFalse(Ty); |
| } |
| |
| /// For a boolean type or a vector of boolean type, return true or a vector |
| /// with every element true. |
| static Constant *getTrue(Type *Ty) { |
| return ConstantInt::getTrue(Ty); |
| } |
| |
| /// isSameCompare - Is V equivalent to the comparison "LHS Pred RHS"? |
| static bool isSameCompare(Value *V, CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS) { |
| CmpInst *Cmp = dyn_cast<CmpInst>(V); |
| if (!Cmp) |
| return false; |
| CmpInst::Predicate CPred = Cmp->getPredicate(); |
| Value *CLHS = Cmp->getOperand(0), *CRHS = Cmp->getOperand(1); |
| if (CPred == Pred && CLHS == LHS && CRHS == RHS) |
| return true; |
| return CPred == CmpInst::getSwappedPredicate(Pred) && CLHS == RHS && |
| CRHS == LHS; |
| } |
| |
| /// Does the given value dominate the specified phi node? |
| static bool valueDominatesPHI(Value *V, PHINode *P, const DominatorTree *DT) { |
| Instruction *I = dyn_cast<Instruction>(V); |
| if (!I) |
| // Arguments and constants dominate all instructions. |
| return true; |
| |
| // If we are processing instructions (and/or basic blocks) that have not been |
| // fully added to a function, the parent nodes may still be null. Simply |
| // return the conservative answer in these cases. |
| if (!I->getParent() || !P->getParent() || !I->getFunction()) |
| return false; |
| |
| // If we have a DominatorTree then do a precise test. |
| if (DT) |
| return DT->dominates(I, P); |
| |
| // Otherwise, if the instruction is in the entry block and is not an invoke, |
| // then it obviously dominates all phi nodes. |
| if (I->getParent() == &I->getFunction()->getEntryBlock() && |
| !isa<InvokeInst>(I)) |
| return true; |
| |
| return false; |
| } |
| |
| /// Simplify "A op (B op' C)" by distributing op over op', turning it into |
| /// "(A op B) op' (A op C)". Here "op" is given by Opcode and "op'" is |
| /// given by OpcodeToExpand, while "A" corresponds to LHS and "B op' C" to RHS. |
| /// Also performs the transform "(A op' B) op C" -> "(A op C) op' (B op C)". |
| /// Returns the simplified value, or null if no simplification was performed. |
| static Value *ExpandBinOp(Instruction::BinaryOps Opcode, Value *LHS, Value *RHS, |
| Instruction::BinaryOps OpcodeToExpand, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| // Check whether the expression has the form "(A op' B) op C". |
| if (BinaryOperator *Op0 = dyn_cast<BinaryOperator>(LHS)) |
| if (Op0->getOpcode() == OpcodeToExpand) { |
| // It does! Try turning it into "(A op C) op' (B op C)". |
| Value *A = Op0->getOperand(0), *B = Op0->getOperand(1), *C = RHS; |
| // Do "A op C" and "B op C" both simplify? |
| if (Value *L = SimplifyBinOp(Opcode, A, C, Q, MaxRecurse)) |
| if (Value *R = SimplifyBinOp(Opcode, B, C, Q, MaxRecurse)) { |
| // They do! Return "L op' R" if it simplifies or is already available. |
| // If "L op' R" equals "A op' B" then "L op' R" is just the LHS. |
| if ((L == A && R == B) || (Instruction::isCommutative(OpcodeToExpand) |
| && L == B && R == A)) { |
| ++NumExpand; |
| return LHS; |
| } |
| // Otherwise return "L op' R" if it simplifies. |
| if (Value *V = SimplifyBinOp(OpcodeToExpand, L, R, Q, MaxRecurse)) { |
| ++NumExpand; |
| return V; |
| } |
| } |
| } |
| |
| // Check whether the expression has the form "A op (B op' C)". |
| if (BinaryOperator *Op1 = dyn_cast<BinaryOperator>(RHS)) |
| if (Op1->getOpcode() == OpcodeToExpand) { |
| // It does! Try turning it into "(A op B) op' (A op C)". |
| Value *A = LHS, *B = Op1->getOperand(0), *C = Op1->getOperand(1); |
| // Do "A op B" and "A op C" both simplify? |
| if (Value *L = SimplifyBinOp(Opcode, A, B, Q, MaxRecurse)) |
| if (Value *R = SimplifyBinOp(Opcode, A, C, Q, MaxRecurse)) { |
| // They do! Return "L op' R" if it simplifies or is already available. |
| // If "L op' R" equals "B op' C" then "L op' R" is just the RHS. |
| if ((L == B && R == C) || (Instruction::isCommutative(OpcodeToExpand) |
| && L == C && R == B)) { |
| ++NumExpand; |
| return RHS; |
| } |
| // Otherwise return "L op' R" if it simplifies. |
| if (Value *V = SimplifyBinOp(OpcodeToExpand, L, R, Q, MaxRecurse)) { |
| ++NumExpand; |
| return V; |
| } |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| /// Generic simplifications for associative binary operations. |
| /// Returns the simpler value, or null if none was found. |
| static Value *SimplifyAssociativeBinOp(Instruction::BinaryOps Opcode, |
| Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| assert(Instruction::isAssociative(Opcode) && "Not an associative operation!"); |
| |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| BinaryOperator *Op0 = dyn_cast<BinaryOperator>(LHS); |
| BinaryOperator *Op1 = dyn_cast<BinaryOperator>(RHS); |
| |
| // Transform: "(A op B) op C" ==> "A op (B op C)" if it simplifies completely. |
| if (Op0 && Op0->getOpcode() == Opcode) { |
| Value *A = Op0->getOperand(0); |
| Value *B = Op0->getOperand(1); |
| Value *C = RHS; |
| |
| // Does "B op C" simplify? |
| if (Value *V = SimplifyBinOp(Opcode, B, C, Q, MaxRecurse)) { |
| // It does! Return "A op V" if it simplifies or is already available. |
| // If V equals B then "A op V" is just the LHS. |
| if (V == B) return LHS; |
| // Otherwise return "A op V" if it simplifies. |
| if (Value *W = SimplifyBinOp(Opcode, A, V, Q, MaxRecurse)) { |
| ++NumReassoc; |
| return W; |
| } |
| } |
| } |
| |
| // Transform: "A op (B op C)" ==> "(A op B) op C" if it simplifies completely. |
| if (Op1 && Op1->getOpcode() == Opcode) { |
| Value *A = LHS; |
| Value *B = Op1->getOperand(0); |
| Value *C = Op1->getOperand(1); |
| |
| // Does "A op B" simplify? |
| if (Value *V = SimplifyBinOp(Opcode, A, B, Q, MaxRecurse)) { |
| // It does! Return "V op C" if it simplifies or is already available. |
| // If V equals B then "V op C" is just the RHS. |
| if (V == B) return RHS; |
| // Otherwise return "V op C" if it simplifies. |
| if (Value *W = SimplifyBinOp(Opcode, V, C, Q, MaxRecurse)) { |
| ++NumReassoc; |
| return W; |
| } |
| } |
| } |
| |
| // The remaining transforms require commutativity as well as associativity. |
| if (!Instruction::isCommutative(Opcode)) |
| return nullptr; |
| |
| // Transform: "(A op B) op C" ==> "(C op A) op B" if it simplifies completely. |
| if (Op0 && Op0->getOpcode() == Opcode) { |
| Value *A = Op0->getOperand(0); |
| Value *B = Op0->getOperand(1); |
| Value *C = RHS; |
| |
| // Does "C op A" simplify? |
| if (Value *V = SimplifyBinOp(Opcode, C, A, Q, MaxRecurse)) { |
| // It does! Return "V op B" if it simplifies or is already available. |
| // If V equals A then "V op B" is just the LHS. |
| if (V == A) return LHS; |
| // Otherwise return "V op B" if it simplifies. |
| if (Value *W = SimplifyBinOp(Opcode, V, B, Q, MaxRecurse)) { |
| ++NumReassoc; |
| return W; |
| } |
| } |
| } |
| |
| // Transform: "A op (B op C)" ==> "B op (C op A)" if it simplifies completely. |
| if (Op1 && Op1->getOpcode() == Opcode) { |
| Value *A = LHS; |
| Value *B = Op1->getOperand(0); |
| Value *C = Op1->getOperand(1); |
| |
| // Does "C op A" simplify? |
| if (Value *V = SimplifyBinOp(Opcode, C, A, Q, MaxRecurse)) { |
| // It does! Return "B op V" if it simplifies or is already available. |
| // If V equals C then "B op V" is just the RHS. |
| if (V == C) return RHS; |
| // Otherwise return "B op V" if it simplifies. |
| if (Value *W = SimplifyBinOp(Opcode, B, V, Q, MaxRecurse)) { |
| ++NumReassoc; |
| return W; |
| } |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| /// In the case of a binary operation with a select instruction as an operand, |
| /// try to simplify the binop by seeing whether evaluating it on both branches |
| /// of the select results in the same value. Returns the common value if so, |
| /// otherwise returns null. |
| static Value *ThreadBinOpOverSelect(Instruction::BinaryOps Opcode, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| SelectInst *SI; |
| if (isa<SelectInst>(LHS)) { |
| SI = cast<SelectInst>(LHS); |
| } else { |
| assert(isa<SelectInst>(RHS) && "No select instruction operand!"); |
| SI = cast<SelectInst>(RHS); |
| } |
| |
| // Evaluate the BinOp on the true and false branches of the select. |
| Value *TV; |
| Value *FV; |
| if (SI == LHS) { |
| TV = SimplifyBinOp(Opcode, SI->getTrueValue(), RHS, Q, MaxRecurse); |
| FV = SimplifyBinOp(Opcode, SI->getFalseValue(), RHS, Q, MaxRecurse); |
| } else { |
| TV = SimplifyBinOp(Opcode, LHS, SI->getTrueValue(), Q, MaxRecurse); |
| FV = SimplifyBinOp(Opcode, LHS, SI->getFalseValue(), Q, MaxRecurse); |
| } |
| |
| // If they simplified to the same value, then return the common value. |
| // If they both failed to simplify then return null. |
| if (TV == FV) |
| return TV; |
| |
| // If one branch simplified to undef, return the other one. |
| if (TV && isa<UndefValue>(TV)) |
| return FV; |
| if (FV && isa<UndefValue>(FV)) |
| return TV; |
| |
| // If applying the operation did not change the true and false select values, |
| // then the result of the binop is the select itself. |
| if (TV == SI->getTrueValue() && FV == SI->getFalseValue()) |
| return SI; |
| |
| // If one branch simplified and the other did not, and the simplified |
| // value is equal to the unsimplified one, return the simplified value. |
| // For example, select (cond, X, X & Z) & Z -> X & Z. |
| if ((FV && !TV) || (TV && !FV)) { |
| // Check that the simplified value has the form "X op Y" where "op" is the |
| // same as the original operation. |
| Instruction *Simplified = dyn_cast<Instruction>(FV ? FV : TV); |
| if (Simplified && Simplified->getOpcode() == unsigned(Opcode)) { |
| // The value that didn't simplify is "UnsimplifiedLHS op UnsimplifiedRHS". |
| // We already know that "op" is the same as for the simplified value. See |
| // if the operands match too. If so, return the simplified value. |
| Value *UnsimplifiedBranch = FV ? SI->getTrueValue() : SI->getFalseValue(); |
| Value *UnsimplifiedLHS = SI == LHS ? UnsimplifiedBranch : LHS; |
| Value *UnsimplifiedRHS = SI == LHS ? RHS : UnsimplifiedBranch; |
| if (Simplified->getOperand(0) == UnsimplifiedLHS && |
| Simplified->getOperand(1) == UnsimplifiedRHS) |
| return Simplified; |
| if (Simplified->isCommutative() && |
| Simplified->getOperand(1) == UnsimplifiedLHS && |
| Simplified->getOperand(0) == UnsimplifiedRHS) |
| return Simplified; |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| /// In the case of a comparison with a select instruction, try to simplify the |
| /// comparison by seeing whether both branches of the select result in the same |
| /// value. Returns the common value if so, otherwise returns null. |
| static Value *ThreadCmpOverSelect(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| // Make sure the select is on the LHS. |
| if (!isa<SelectInst>(LHS)) { |
| std::swap(LHS, RHS); |
| Pred = CmpInst::getSwappedPredicate(Pred); |
| } |
| assert(isa<SelectInst>(LHS) && "Not comparing with a select instruction!"); |
| SelectInst *SI = cast<SelectInst>(LHS); |
| Value *Cond = SI->getCondition(); |
| Value *TV = SI->getTrueValue(); |
| Value *FV = SI->getFalseValue(); |
| |
| // Now that we have "cmp select(Cond, TV, FV), RHS", analyse it. |
| // Does "cmp TV, RHS" simplify? |
| Value *TCmp = SimplifyCmpInst(Pred, TV, RHS, Q, MaxRecurse); |
| if (TCmp == Cond) { |
| // It not only simplified, it simplified to the select condition. Replace |
| // it with 'true'. |
| TCmp = getTrue(Cond->getType()); |
| } else if (!TCmp) { |
| // It didn't simplify. However if "cmp TV, RHS" is equal to the select |
| // condition then we can replace it with 'true'. Otherwise give up. |
| if (!isSameCompare(Cond, Pred, TV, RHS)) |
| return nullptr; |
| TCmp = getTrue(Cond->getType()); |
| } |
| |
| // Does "cmp FV, RHS" simplify? |
| Value *FCmp = SimplifyCmpInst(Pred, FV, RHS, Q, MaxRecurse); |
| if (FCmp == Cond) { |
| // It not only simplified, it simplified to the select condition. Replace |
| // it with 'false'. |
| FCmp = getFalse(Cond->getType()); |
| } else if (!FCmp) { |
| // It didn't simplify. However if "cmp FV, RHS" is equal to the select |
| // condition then we can replace it with 'false'. Otherwise give up. |
| if (!isSameCompare(Cond, Pred, FV, RHS)) |
| return nullptr; |
| FCmp = getFalse(Cond->getType()); |
| } |
| |
| // If both sides simplified to the same value, then use it as the result of |
| // the original comparison. |
| if (TCmp == FCmp) |
| return TCmp; |
| |
| // The remaining cases only make sense if the select condition has the same |
| // type as the result of the comparison, so bail out if this is not so. |
| if (Cond->getType()->isVectorTy() != RHS->getType()->isVectorTy()) |
| return nullptr; |
| // If the false value simplified to false, then the result of the compare |
| // is equal to "Cond && TCmp". This also catches the case when the false |
| // value simplified to false and the true value to true, returning "Cond". |
| if (match(FCmp, m_Zero())) |
| if (Value *V = SimplifyAndInst(Cond, TCmp, Q, MaxRecurse)) |
| return V; |
| // If the true value simplified to true, then the result of the compare |
| // is equal to "Cond || FCmp". |
| if (match(TCmp, m_One())) |
| if (Value *V = SimplifyOrInst(Cond, FCmp, Q, MaxRecurse)) |
| return V; |
| // Finally, if the false value simplified to true and the true value to |
| // false, then the result of the compare is equal to "!Cond". |
| if (match(FCmp, m_One()) && match(TCmp, m_Zero())) |
| if (Value *V = |
| SimplifyXorInst(Cond, Constant::getAllOnesValue(Cond->getType()), |
| Q, MaxRecurse)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| /// In the case of a binary operation with an operand that is a PHI instruction, |
| /// try to simplify the binop by seeing whether evaluating it on the incoming |
| /// phi values yields the same result for every value. If so returns the common |
| /// value, otherwise returns null. |
| static Value *ThreadBinOpOverPHI(Instruction::BinaryOps Opcode, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| PHINode *PI; |
| if (isa<PHINode>(LHS)) { |
| PI = cast<PHINode>(LHS); |
| // Bail out if RHS and the phi may be mutually interdependent due to a loop. |
| if (!valueDominatesPHI(RHS, PI, Q.DT)) |
| return nullptr; |
| } else { |
| assert(isa<PHINode>(RHS) && "No PHI instruction operand!"); |
| PI = cast<PHINode>(RHS); |
| // Bail out if LHS and the phi may be mutually interdependent due to a loop. |
| if (!valueDominatesPHI(LHS, PI, Q.DT)) |
| return nullptr; |
| } |
| |
| // Evaluate the BinOp on the incoming phi values. |
| Value *CommonValue = nullptr; |
| for (Value *Incoming : PI->incoming_values()) { |
| // If the incoming value is the phi node itself, it can safely be skipped. |
| if (Incoming == PI) continue; |
| Value *V = PI == LHS ? |
| SimplifyBinOp(Opcode, Incoming, RHS, Q, MaxRecurse) : |
| SimplifyBinOp(Opcode, LHS, Incoming, Q, MaxRecurse); |
| // If the operation failed to simplify, or simplified to a different value |
| // to previously, then give up. |
| if (!V || (CommonValue && V != CommonValue)) |
| return nullptr; |
| CommonValue = V; |
| } |
| |
| return CommonValue; |
| } |
| |
| /// In the case of a comparison with a PHI instruction, try to simplify the |
| /// comparison by seeing whether comparing with all of the incoming phi values |
| /// yields the same result every time. If so returns the common result, |
| /// otherwise returns null. |
| static Value *ThreadCmpOverPHI(CmpInst::Predicate Pred, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| // Make sure the phi is on the LHS. |
| if (!isa<PHINode>(LHS)) { |
| std::swap(LHS, RHS); |
| Pred = CmpInst::getSwappedPredicate(Pred); |
| } |
| assert(isa<PHINode>(LHS) && "Not comparing with a phi instruction!"); |
| PHINode *PI = cast<PHINode>(LHS); |
| |
| // Bail out if RHS and the phi may be mutually interdependent due to a loop. |
| if (!valueDominatesPHI(RHS, PI, Q.DT)) |
| return nullptr; |
| |
| // Evaluate the BinOp on the incoming phi values. |
| Value *CommonValue = nullptr; |
| for (Value *Incoming : PI->incoming_values()) { |
| // If the incoming value is the phi node itself, it can safely be skipped. |
| if (Incoming == PI) continue; |
| Value *V = SimplifyCmpInst(Pred, Incoming, RHS, Q, MaxRecurse); |
| // If the operation failed to simplify, or simplified to a different value |
| // to previously, then give up. |
| if (!V || (CommonValue && V != CommonValue)) |
| return nullptr; |
| CommonValue = V; |
| } |
| |
| return CommonValue; |
| } |
| |
| static Constant *foldOrCommuteConstant(Instruction::BinaryOps Opcode, |
| Value *&Op0, Value *&Op1, |
| const SimplifyQuery &Q) { |
| if (auto *CLHS = dyn_cast<Constant>(Op0)) { |
| if (auto *CRHS = dyn_cast<Constant>(Op1)) |
| return ConstantFoldBinaryOpOperands(Opcode, CLHS, CRHS, Q.DL); |
| |
| // Canonicalize the constant to the RHS if this is a commutative operation. |
| if (Instruction::isCommutative(Opcode)) |
| std::swap(Op0, Op1); |
| } |
| return nullptr; |
| } |
| |
| /// Given operands for an Add, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyAddInst(Value *Op0, Value *Op1, bool IsNSW, bool IsNUW, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::Add, Op0, Op1, Q)) |
| return C; |
| |
| // X + undef -> undef |
| if (match(Op1, m_Undef())) |
| return Op1; |
| |
| // X + 0 -> X |
| if (match(Op1, m_Zero())) |
| return Op0; |
| |
| // If two operands are negative, return 0. |
| if (isKnownNegation(Op0, Op1)) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X + (Y - X) -> Y |
| // (Y - X) + X -> Y |
| // Eg: X + -X -> 0 |
| Value *Y = nullptr; |
| if (match(Op1, m_Sub(m_Value(Y), m_Specific(Op0))) || |
| match(Op0, m_Sub(m_Value(Y), m_Specific(Op1)))) |
| return Y; |
| |
| // X + ~X -> -1 since ~X = -X-1 |
| Type *Ty = Op0->getType(); |
| if (match(Op0, m_Not(m_Specific(Op1))) || |
| match(Op1, m_Not(m_Specific(Op0)))) |
| return Constant::getAllOnesValue(Ty); |
| |
| // add nsw/nuw (xor Y, signmask), signmask --> Y |
| // The no-wrapping add guarantees that the top bit will be set by the add. |
| // Therefore, the xor must be clearing the already set sign bit of Y. |
| if ((IsNSW || IsNUW) && match(Op1, m_SignMask()) && |
| match(Op0, m_Xor(m_Value(Y), m_SignMask()))) |
| return Y; |
| |
| // add nuw %x, -1 -> -1, because %x can only be 0. |
| if (IsNUW && match(Op1, m_AllOnes())) |
| return Op1; // Which is -1. |
| |
| /// i1 add -> xor. |
| if (MaxRecurse && Op0->getType()->isIntOrIntVectorTy(1)) |
| if (Value *V = SimplifyXorInst(Op0, Op1, Q, MaxRecurse-1)) |
| return V; |
| |
| // Try some generic simplifications for associative operations. |
| if (Value *V = SimplifyAssociativeBinOp(Instruction::Add, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // Threading Add over selects and phi nodes is pointless, so don't bother. |
| // Threading over the select in "A + select(cond, B, C)" means evaluating |
| // "A+B" and "A+C" and seeing if they are equal; but they are equal if and |
| // only if B and C are equal. If B and C are equal then (since we assume |
| // that operands have already been simplified) "select(cond, B, C)" should |
| // have been simplified to the common value of B and C already. Analysing |
| // "A+B" and "A+C" thus gains nothing, but costs compile time. Similarly |
| // for threading over phi nodes. |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyAddInst(Value *Op0, Value *Op1, bool IsNSW, bool IsNUW, |
| const SimplifyQuery &Query) { |
| return ::SimplifyAddInst(Op0, Op1, IsNSW, IsNUW, Query, RecursionLimit); |
| } |
| |
| /// Compute the base pointer and cumulative constant offsets for V. |
| /// |
| /// This strips all constant offsets off of V, leaving it the base pointer, and |
| /// accumulates the total constant offset applied in the returned constant. It |
| /// returns 0 if V is not a pointer, and returns the constant '0' if there are |
| /// no constant offsets applied. |
| /// |
| /// This is very similar to GetPointerBaseWithConstantOffset except it doesn't |
| /// follow non-inbounds geps. This allows it to remain usable for icmp ult/etc. |
| /// folding. |
| static Constant *stripAndComputeConstantOffsets(const DataLayout &DL, Value *&V, |
| bool AllowNonInbounds = false) { |
| assert(V->getType()->isPtrOrPtrVectorTy()); |
| |
| Type *IntPtrTy = DL.getIntPtrType(V->getType())->getScalarType(); |
| APInt Offset = APInt::getNullValue(IntPtrTy->getIntegerBitWidth()); |
| |
| // Even though we don't look through PHI nodes, we could be called on an |
| // instruction in an unreachable block, which may be on a cycle. |
| SmallPtrSet<Value *, 4> Visited; |
| Visited.insert(V); |
| do { |
| if (GEPOperator *GEP = dyn_cast<GEPOperator>(V)) { |
| if ((!AllowNonInbounds && !GEP->isInBounds()) || |
| !GEP->accumulateConstantOffset(DL, Offset)) |
| break; |
| V = GEP->getPointerOperand(); |
| } else if (Operator::getOpcode(V) == Instruction::BitCast) { |
| V = cast<Operator>(V)->getOperand(0); |
| } else if (GlobalAlias *GA = dyn_cast<GlobalAlias>(V)) { |
| if (GA->isInterposable()) |
| break; |
| V = GA->getAliasee(); |
| } else { |
| if (auto CS = CallSite(V)) |
| if (Value *RV = CS.getReturnedArgOperand()) { |
| V = RV; |
| continue; |
| } |
| break; |
| } |
| assert(V->getType()->isPtrOrPtrVectorTy() && "Unexpected operand type!"); |
| } while (Visited.insert(V).second); |
| |
| Constant *OffsetIntPtr = ConstantInt::get(IntPtrTy, Offset); |
| if (V->getType()->isVectorTy()) |
| return ConstantVector::getSplat(V->getType()->getVectorNumElements(), |
| OffsetIntPtr); |
| return OffsetIntPtr; |
| } |
| |
| /// Compute the constant difference between two pointer values. |
| /// If the difference is not a constant, returns zero. |
| static Constant *computePointerDifference(const DataLayout &DL, Value *LHS, |
| Value *RHS) { |
| Constant *LHSOffset = stripAndComputeConstantOffsets(DL, LHS); |
| Constant *RHSOffset = stripAndComputeConstantOffsets(DL, RHS); |
| |
| // If LHS and RHS are not related via constant offsets to the same base |
| // value, there is nothing we can do here. |
| if (LHS != RHS) |
| return nullptr; |
| |
| // Otherwise, the difference of LHS - RHS can be computed as: |
| // LHS - RHS |
| // = (LHSOffset + Base) - (RHSOffset + Base) |
| // = LHSOffset - RHSOffset |
| return ConstantExpr::getSub(LHSOffset, RHSOffset); |
| } |
| |
| /// Given operands for a Sub, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifySubInst(Value *Op0, Value *Op1, bool isNSW, bool isNUW, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::Sub, Op0, Op1, Q)) |
| return C; |
| |
| // X - undef -> undef |
| // undef - X -> undef |
| if (match(Op0, m_Undef()) || match(Op1, m_Undef())) |
| return UndefValue::get(Op0->getType()); |
| |
| // X - 0 -> X |
| if (match(Op1, m_Zero())) |
| return Op0; |
| |
| // X - X -> 0 |
| if (Op0 == Op1) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // Is this a negation? |
| if (match(Op0, m_Zero())) { |
| // 0 - X -> 0 if the sub is NUW. |
| if (isNUW) |
| return Constant::getNullValue(Op0->getType()); |
| |
| KnownBits Known = computeKnownBits(Op1, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (Known.Zero.isMaxSignedValue()) { |
| // Op1 is either 0 or the minimum signed value. If the sub is NSW, then |
| // Op1 must be 0 because negating the minimum signed value is undefined. |
| if (isNSW) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // 0 - X -> X if X is 0 or the minimum signed value. |
| return Op1; |
| } |
| } |
| |
| // (X + Y) - Z -> X + (Y - Z) or Y + (X - Z) if everything simplifies. |
| // For example, (X + Y) - Y -> X; (Y + X) - Y -> X |
| Value *X = nullptr, *Y = nullptr, *Z = Op1; |
| if (MaxRecurse && match(Op0, m_Add(m_Value(X), m_Value(Y)))) { // (X + Y) - Z |
| // See if "V === Y - Z" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, Y, Z, Q, MaxRecurse-1)) |
| // It does! Now see if "X + V" simplifies. |
| if (Value *W = SimplifyBinOp(Instruction::Add, X, V, Q, MaxRecurse-1)) { |
| // It does, we successfully reassociated! |
| ++NumReassoc; |
| return W; |
| } |
| // See if "V === X - Z" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, X, Z, Q, MaxRecurse-1)) |
| // It does! Now see if "Y + V" simplifies. |
| if (Value *W = SimplifyBinOp(Instruction::Add, Y, V, Q, MaxRecurse-1)) { |
| // It does, we successfully reassociated! |
| ++NumReassoc; |
| return W; |
| } |
| } |
| |
| // X - (Y + Z) -> (X - Y) - Z or (X - Z) - Y if everything simplifies. |
| // For example, X - (X + 1) -> -1 |
| X = Op0; |
| if (MaxRecurse && match(Op1, m_Add(m_Value(Y), m_Value(Z)))) { // X - (Y + Z) |
| // See if "V === X - Y" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, X, Y, Q, MaxRecurse-1)) |
| // It does! Now see if "V - Z" simplifies. |
| if (Value *W = SimplifyBinOp(Instruction::Sub, V, Z, Q, MaxRecurse-1)) { |
| // It does, we successfully reassociated! |
| ++NumReassoc; |
| return W; |
| } |
| // See if "V === X - Z" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, X, Z, Q, MaxRecurse-1)) |
| // It does! Now see if "V - Y" simplifies. |
| if (Value *W = SimplifyBinOp(Instruction::Sub, V, Y, Q, MaxRecurse-1)) { |
| // It does, we successfully reassociated! |
| ++NumReassoc; |
| return W; |
| } |
| } |
| |
| // Z - (X - Y) -> (Z - X) + Y if everything simplifies. |
| // For example, X - (X - Y) -> Y. |
| Z = Op0; |
| if (MaxRecurse && match(Op1, m_Sub(m_Value(X), m_Value(Y)))) // Z - (X - Y) |
| // See if "V === Z - X" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, Z, X, Q, MaxRecurse-1)) |
| // It does! Now see if "V + Y" simplifies. |
| if (Value *W = SimplifyBinOp(Instruction::Add, V, Y, Q, MaxRecurse-1)) { |
| // It does, we successfully reassociated! |
| ++NumReassoc; |
| return W; |
| } |
| |
| // trunc(X) - trunc(Y) -> trunc(X - Y) if everything simplifies. |
| if (MaxRecurse && match(Op0, m_Trunc(m_Value(X))) && |
| match(Op1, m_Trunc(m_Value(Y)))) |
| if (X->getType() == Y->getType()) |
| // See if "V === X - Y" simplifies. |
| if (Value *V = SimplifyBinOp(Instruction::Sub, X, Y, Q, MaxRecurse-1)) |
| // It does! Now see if "trunc V" simplifies. |
| if (Value *W = SimplifyCastInst(Instruction::Trunc, V, Op0->getType(), |
| Q, MaxRecurse - 1)) |
| // It does, return the simplified "trunc V". |
| return W; |
| |
| // Variations on GEP(base, I, ...) - GEP(base, i, ...) -> GEP(null, I-i, ...). |
| if (match(Op0, m_PtrToInt(m_Value(X))) && |
| match(Op1, m_PtrToInt(m_Value(Y)))) |
| if (Constant *Result = computePointerDifference(Q.DL, X, Y)) |
| return ConstantExpr::getIntegerCast(Result, Op0->getType(), true); |
| |
| // i1 sub -> xor. |
| if (MaxRecurse && Op0->getType()->isIntOrIntVectorTy(1)) |
| if (Value *V = SimplifyXorInst(Op0, Op1, Q, MaxRecurse-1)) |
| return V; |
| |
| // Threading Sub over selects and phi nodes is pointless, so don't bother. |
| // Threading over the select in "A - select(cond, B, C)" means evaluating |
| // "A-B" and "A-C" and seeing if they are equal; but they are equal if and |
| // only if B and C are equal. If B and C are equal then (since we assume |
| // that operands have already been simplified) "select(cond, B, C)" should |
| // have been simplified to the common value of B and C already. Analysing |
| // "A-B" and "A-C" thus gains nothing, but costs compile time. Similarly |
| // for threading over phi nodes. |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifySubInst(Value *Op0, Value *Op1, bool isNSW, bool isNUW, |
| const SimplifyQuery &Q) { |
| return ::SimplifySubInst(Op0, Op1, isNSW, isNUW, Q, RecursionLimit); |
| } |
| |
| /// Given operands for a Mul, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyMulInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::Mul, Op0, Op1, Q)) |
| return C; |
| |
| // X * undef -> 0 |
| // X * 0 -> 0 |
| if (match(Op1, m_CombineOr(m_Undef(), m_Zero()))) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X * 1 -> X |
| if (match(Op1, m_One())) |
| return Op0; |
| |
| // (X / Y) * Y -> X if the division is exact. |
| Value *X = nullptr; |
| if (match(Op0, m_Exact(m_IDiv(m_Value(X), m_Specific(Op1)))) || // (X / Y) * Y |
| match(Op1, m_Exact(m_IDiv(m_Value(X), m_Specific(Op0))))) // Y * (X / Y) |
| return X; |
| |
| // i1 mul -> and. |
| if (MaxRecurse && Op0->getType()->isIntOrIntVectorTy(1)) |
| if (Value *V = SimplifyAndInst(Op0, Op1, Q, MaxRecurse-1)) |
| return V; |
| |
| // Try some generic simplifications for associative operations. |
| if (Value *V = SimplifyAssociativeBinOp(Instruction::Mul, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // Mul distributes over Add. Try some generic simplifications based on this. |
| if (Value *V = ExpandBinOp(Instruction::Mul, Op0, Op1, Instruction::Add, |
| Q, MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Instruction::Mul, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Instruction::Mul, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyMulInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyMulInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Check for common or similar folds of integer division or integer remainder. |
| /// This applies to all 4 opcodes (sdiv/udiv/srem/urem). |
| static Value *simplifyDivRem(Value *Op0, Value *Op1, bool IsDiv) { |
| Type *Ty = Op0->getType(); |
| |
| // X / undef -> undef |
| // X % undef -> undef |
| if (match(Op1, m_Undef())) |
| return Op1; |
| |
| // X / 0 -> undef |
| // X % 0 -> undef |
| // We don't need to preserve faults! |
| if (match(Op1, m_Zero())) |
| return UndefValue::get(Ty); |
| |
| // If any element of a constant divisor vector is zero or undef, the whole op |
| // is undef. |
| auto *Op1C = dyn_cast<Constant>(Op1); |
| if (Op1C && Ty->isVectorTy()) { |
| unsigned NumElts = Ty->getVectorNumElements(); |
| for (unsigned i = 0; i != NumElts; ++i) { |
| Constant *Elt = Op1C->getAggregateElement(i); |
| if (Elt && (Elt->isNullValue() || isa<UndefValue>(Elt))) |
| return UndefValue::get(Ty); |
| } |
| } |
| |
| // undef / X -> 0 |
| // undef % X -> 0 |
| if (match(Op0, m_Undef())) |
| return Constant::getNullValue(Ty); |
| |
| // 0 / X -> 0 |
| // 0 % X -> 0 |
| if (match(Op0, m_Zero())) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X / X -> 1 |
| // X % X -> 0 |
| if (Op0 == Op1) |
| return IsDiv ? ConstantInt::get(Ty, 1) : Constant::getNullValue(Ty); |
| |
| // X / 1 -> X |
| // X % 1 -> 0 |
| // If this is a boolean op (single-bit element type), we can't have |
| // division-by-zero or remainder-by-zero, so assume the divisor is 1. |
| // Similarly, if we're zero-extending a boolean divisor, then assume it's a 1. |
| Value *X; |
| if (match(Op1, m_One()) || Ty->isIntOrIntVectorTy(1) || |
| (match(Op1, m_ZExt(m_Value(X))) && X->getType()->isIntOrIntVectorTy(1))) |
| return IsDiv ? Op0 : Constant::getNullValue(Ty); |
| |
| return nullptr; |
| } |
| |
| /// Given a predicate and two operands, return true if the comparison is true. |
| /// This is a helper for div/rem simplification where we return some other value |
| /// when we can prove a relationship between the operands. |
| static bool isICmpTrue(ICmpInst::Predicate Pred, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| Value *V = SimplifyICmpInst(Pred, LHS, RHS, Q, MaxRecurse); |
| Constant *C = dyn_cast_or_null<Constant>(V); |
| return (C && C->isAllOnesValue()); |
| } |
| |
| /// Return true if we can simplify X / Y to 0. Remainder can adapt that answer |
| /// to simplify X % Y to X. |
| static bool isDivZero(Value *X, Value *Y, const SimplifyQuery &Q, |
| unsigned MaxRecurse, bool IsSigned) { |
| // Recursion is always used, so bail out at once if we already hit the limit. |
| if (!MaxRecurse--) |
| return false; |
| |
| if (IsSigned) { |
| // |X| / |Y| --> 0 |
| // |
| // We require that 1 operand is a simple constant. That could be extended to |
| // 2 variables if we computed the sign bit for each. |
| // |
| // Make sure that a constant is not the minimum signed value because taking |
| // the abs() of that is undefined. |
| Type *Ty = X->getType(); |
| const APInt *C; |
| if (match(X, m_APInt(C)) && !C->isMinSignedValue()) { |
| // Is the variable divisor magnitude always greater than the constant |
| // dividend magnitude? |
| // |Y| > |C| --> Y < -abs(C) or Y > abs(C) |
| Constant *PosDividendC = ConstantInt::get(Ty, C->abs()); |
| Constant *NegDividendC = ConstantInt::get(Ty, -C->abs()); |
| if (isICmpTrue(CmpInst::ICMP_SLT, Y, NegDividendC, Q, MaxRecurse) || |
| isICmpTrue(CmpInst::ICMP_SGT, Y, PosDividendC, Q, MaxRecurse)) |
| return true; |
| } |
| if (match(Y, m_APInt(C))) { |
| // Special-case: we can't take the abs() of a minimum signed value. If |
| // that's the divisor, then all we have to do is prove that the dividend |
| // is also not the minimum signed value. |
| if (C->isMinSignedValue()) |
| return isICmpTrue(CmpInst::ICMP_NE, X, Y, Q, MaxRecurse); |
| |
| // Is the variable dividend magnitude always less than the constant |
| // divisor magnitude? |
| // |X| < |C| --> X > -abs(C) and X < abs(C) |
| Constant *PosDivisorC = ConstantInt::get(Ty, C->abs()); |
| Constant *NegDivisorC = ConstantInt::get(Ty, -C->abs()); |
| if (isICmpTrue(CmpInst::ICMP_SGT, X, NegDivisorC, Q, MaxRecurse) && |
| isICmpTrue(CmpInst::ICMP_SLT, X, PosDivisorC, Q, MaxRecurse)) |
| return true; |
| } |
| return false; |
| } |
| |
| // IsSigned == false. |
| // Is the dividend unsigned less than the divisor? |
| return isICmpTrue(ICmpInst::ICMP_ULT, X, Y, Q, MaxRecurse); |
| } |
| |
| /// These are simplifications common to SDiv and UDiv. |
| static Value *simplifyDiv(Instruction::BinaryOps Opcode, Value *Op0, Value *Op1, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Opcode, Op0, Op1, Q)) |
| return C; |
| |
| if (Value *V = simplifyDivRem(Op0, Op1, true)) |
| return V; |
| |
| bool IsSigned = Opcode == Instruction::SDiv; |
| |
| // (X * Y) / Y -> X if the multiplication does not overflow. |
| Value *X; |
| if (match(Op0, m_c_Mul(m_Value(X), m_Specific(Op1)))) { |
| auto *Mul = cast<OverflowingBinaryOperator>(Op0); |
| // If the Mul does not overflow, then we are good to go. |
| if ((IsSigned && Mul->hasNoSignedWrap()) || |
| (!IsSigned && Mul->hasNoUnsignedWrap())) |
| return X; |
| // If X has the form X = A / Y, then X * Y cannot overflow. |
| if ((IsSigned && match(X, m_SDiv(m_Value(), m_Specific(Op1)))) || |
| (!IsSigned && match(X, m_UDiv(m_Value(), m_Specific(Op1))))) |
| return X; |
| } |
| |
| // (X rem Y) / Y -> 0 |
| if ((IsSigned && match(Op0, m_SRem(m_Value(), m_Specific(Op1)))) || |
| (!IsSigned && match(Op0, m_URem(m_Value(), m_Specific(Op1))))) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // (X /u C1) /u C2 -> 0 if C1 * C2 overflow |
| ConstantInt *C1, *C2; |
| if (!IsSigned && match(Op0, m_UDiv(m_Value(X), m_ConstantInt(C1))) && |
| match(Op1, m_ConstantInt(C2))) { |
| bool Overflow; |
| (void)C1->getValue().umul_ov(C2->getValue(), Overflow); |
| if (Overflow) |
| return Constant::getNullValue(Op0->getType()); |
| } |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| if (isDivZero(Op0, Op1, Q, MaxRecurse, IsSigned)) |
| return Constant::getNullValue(Op0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// These are simplifications common to SRem and URem. |
| static Value *simplifyRem(Instruction::BinaryOps Opcode, Value *Op0, Value *Op1, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Opcode, Op0, Op1, Q)) |
| return C; |
| |
| if (Value *V = simplifyDivRem(Op0, Op1, false)) |
| return V; |
| |
| // (X % Y) % Y -> X % Y |
| if ((Opcode == Instruction::SRem && |
| match(Op0, m_SRem(m_Value(), m_Specific(Op1)))) || |
| (Opcode == Instruction::URem && |
| match(Op0, m_URem(m_Value(), m_Specific(Op1))))) |
| return Op0; |
| |
| // (X << Y) % X -> 0 |
| if ((Opcode == Instruction::SRem && |
| match(Op0, m_NSWShl(m_Specific(Op1), m_Value()))) || |
| (Opcode == Instruction::URem && |
| match(Op0, m_NUWShl(m_Specific(Op1), m_Value())))) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // If X / Y == 0, then X % Y == X. |
| if (isDivZero(Op0, Op1, Q, MaxRecurse, Opcode == Instruction::SRem)) |
| return Op0; |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an SDiv, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifySDivInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // If two operands are negated and no signed overflow, return -1. |
| if (isKnownNegation(Op0, Op1, /*NeedNSW=*/true)) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| return simplifyDiv(Instruction::SDiv, Op0, Op1, Q, MaxRecurse); |
| } |
| |
| Value *llvm::SimplifySDivInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifySDivInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Given operands for a UDiv, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyUDivInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| return simplifyDiv(Instruction::UDiv, Op0, Op1, Q, MaxRecurse); |
| } |
| |
| Value *llvm::SimplifyUDivInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyUDivInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an SRem, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifySRemInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // If the divisor is 0, the result is undefined, so assume the divisor is -1. |
| // srem Op0, (sext i1 X) --> srem Op0, -1 --> 0 |
| Value *X; |
| if (match(Op1, m_SExt(m_Value(X))) && X->getType()->isIntOrIntVectorTy(1)) |
| return ConstantInt::getNullValue(Op0->getType()); |
| |
| // If the two operands are negated, return 0. |
| if (isKnownNegation(Op0, Op1)) |
| return ConstantInt::getNullValue(Op0->getType()); |
| |
| return simplifyRem(Instruction::SRem, Op0, Op1, Q, MaxRecurse); |
| } |
| |
| Value *llvm::SimplifySRemInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifySRemInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Given operands for a URem, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyURemInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| return simplifyRem(Instruction::URem, Op0, Op1, Q, MaxRecurse); |
| } |
| |
| Value *llvm::SimplifyURemInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyURemInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Returns true if a shift by \c Amount always yields undef. |
| static bool isUndefShift(Value *Amount) { |
| Constant *C = dyn_cast<Constant>(Amount); |
| if (!C) |
| return false; |
| |
| // X shift by undef -> undef because it may shift by the bitwidth. |
| if (isa<UndefValue>(C)) |
| return true; |
| |
| // Shifting by the bitwidth or more is undefined. |
| if (ConstantInt *CI = dyn_cast<ConstantInt>(C)) |
| if (CI->getValue().getLimitedValue() >= |
| CI->getType()->getScalarSizeInBits()) |
| return true; |
| |
| // If all lanes of a vector shift are undefined the whole shift is. |
| if (isa<ConstantVector>(C) || isa<ConstantDataVector>(C)) { |
| for (unsigned I = 0, E = C->getType()->getVectorNumElements(); I != E; ++I) |
| if (!isUndefShift(C->getAggregateElement(I))) |
| return false; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /// Given operands for an Shl, LShr or AShr, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyShift(Instruction::BinaryOps Opcode, Value *Op0, |
| Value *Op1, const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Opcode, Op0, Op1, Q)) |
| return C; |
| |
| // 0 shift by X -> 0 |
| if (match(Op0, m_Zero())) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X shift by 0 -> X |
| // Shift-by-sign-extended bool must be shift-by-0 because shift-by-all-ones |
| // would be poison. |
| Value *X; |
| if (match(Op1, m_Zero()) || |
| (match(Op1, m_SExt(m_Value(X))) && X->getType()->isIntOrIntVectorTy(1))) |
| return Op0; |
| |
| // Fold undefined shifts. |
| if (isUndefShift(Op1)) |
| return UndefValue::get(Op0->getType()); |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // If any bits in the shift amount make that value greater than or equal to |
| // the number of bits in the type, the shift is undefined. |
| KnownBits Known = computeKnownBits(Op1, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (Known.One.getLimitedValue() >= Known.getBitWidth()) |
| return UndefValue::get(Op0->getType()); |
| |
| // If all valid bits in the shift amount are known zero, the first operand is |
| // unchanged. |
| unsigned NumValidShiftBits = Log2_32_Ceil(Known.getBitWidth()); |
| if (Known.countMinTrailingZeros() >= NumValidShiftBits) |
| return Op0; |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an Shl, LShr or AShr, see if we can |
| /// fold the result. If not, this returns null. |
| static Value *SimplifyRightShift(Instruction::BinaryOps Opcode, Value *Op0, |
| Value *Op1, bool isExact, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (Value *V = SimplifyShift(Opcode, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // X >> X -> 0 |
| if (Op0 == Op1) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // undef >> X -> 0 |
| // undef >> X -> undef (if it's exact) |
| if (match(Op0, m_Undef())) |
| return isExact ? Op0 : Constant::getNullValue(Op0->getType()); |
| |
| // The low bit cannot be shifted out of an exact shift if it is set. |
| if (isExact) { |
| KnownBits Op0Known = computeKnownBits(Op0, Q.DL, /*Depth=*/0, Q.AC, Q.CxtI, Q.DT); |
| if (Op0Known.One[0]) |
| return Op0; |
| } |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an Shl, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyShlInst(Value *Op0, Value *Op1, bool isNSW, bool isNUW, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Value *V = SimplifyShift(Instruction::Shl, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| // undef << X -> 0 |
| // undef << X -> undef if (if it's NSW/NUW) |
| if (match(Op0, m_Undef())) |
| return isNSW || isNUW ? Op0 : Constant::getNullValue(Op0->getType()); |
| |
| // (X >> A) << A -> X |
| Value *X; |
| if (match(Op0, m_Exact(m_Shr(m_Value(X), m_Specific(Op1))))) |
| return X; |
| |
| // shl nuw i8 C, %x -> C iff C has sign bit set. |
| if (isNUW && match(Op0, m_Negative())) |
| return Op0; |
| // NOTE: could use computeKnownBits() / LazyValueInfo, |
| // but the cost-benefit analysis suggests it isn't worth it. |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyShlInst(Value *Op0, Value *Op1, bool isNSW, bool isNUW, |
| const SimplifyQuery &Q) { |
| return ::SimplifyShlInst(Op0, Op1, isNSW, isNUW, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an LShr, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyLShrInst(Value *Op0, Value *Op1, bool isExact, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Value *V = SimplifyRightShift(Instruction::LShr, Op0, Op1, isExact, Q, |
| MaxRecurse)) |
| return V; |
| |
| // (X << A) >> A -> X |
| Value *X; |
| if (match(Op0, m_NUWShl(m_Value(X), m_Specific(Op1)))) |
| return X; |
| |
| // ((X << A) | Y) >> A -> X if effective width of Y is not larger than A. |
| // We can return X as we do in the above case since OR alters no bits in X. |
| // SimplifyDemandedBits in InstCombine can do more general optimization for |
| // bit manipulation. This pattern aims to provide opportunities for other |
| // optimizers by supporting a simple but common case in InstSimplify. |
| Value *Y; |
| const APInt *ShRAmt, *ShLAmt; |
| if (match(Op1, m_APInt(ShRAmt)) && |
| match(Op0, m_c_Or(m_NUWShl(m_Value(X), m_APInt(ShLAmt)), m_Value(Y))) && |
| *ShRAmt == *ShLAmt) { |
| const KnownBits YKnown = computeKnownBits(Y, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| const unsigned Width = Op0->getType()->getScalarSizeInBits(); |
| const unsigned EffWidthY = Width - YKnown.countMinLeadingZeros(); |
| if (ShRAmt->uge(EffWidthY)) |
| return X; |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyLShrInst(Value *Op0, Value *Op1, bool isExact, |
| const SimplifyQuery &Q) { |
| return ::SimplifyLShrInst(Op0, Op1, isExact, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an AShr, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyAShrInst(Value *Op0, Value *Op1, bool isExact, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Value *V = SimplifyRightShift(Instruction::AShr, Op0, Op1, isExact, Q, |
| MaxRecurse)) |
| return V; |
| |
| // all ones >>a X -> -1 |
| // Do not return Op0 because it may contain undef elements if it's a vector. |
| if (match(Op0, m_AllOnes())) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| // (X << A) >> A -> X |
| Value *X; |
| if (match(Op0, m_NSWShl(m_Value(X), m_Specific(Op1)))) |
| return X; |
| |
| // Arithmetic shifting an all-sign-bit value is a no-op. |
| unsigned NumSignBits = ComputeNumSignBits(Op0, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (NumSignBits == Op0->getType()->getScalarSizeInBits()) |
| return Op0; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyAShrInst(Value *Op0, Value *Op1, bool isExact, |
| const SimplifyQuery &Q) { |
| return ::SimplifyAShrInst(Op0, Op1, isExact, Q, RecursionLimit); |
| } |
| |
| /// Commuted variants are assumed to be handled by calling this function again |
| /// with the parameters swapped. |
| static Value *simplifyUnsignedRangeCheck(ICmpInst *ZeroICmp, |
| ICmpInst *UnsignedICmp, bool IsAnd) { |
| Value *X, *Y; |
| |
| ICmpInst::Predicate EqPred; |
| if (!match(ZeroICmp, m_ICmp(EqPred, m_Value(Y), m_Zero())) || |
| !ICmpInst::isEquality(EqPred)) |
| return nullptr; |
| |
| ICmpInst::Predicate UnsignedPred; |
| if (match(UnsignedICmp, m_ICmp(UnsignedPred, m_Value(X), m_Specific(Y))) && |
| ICmpInst::isUnsigned(UnsignedPred)) |
| ; |
| else if (match(UnsignedICmp, |
| m_ICmp(UnsignedPred, m_Specific(Y), m_Value(X))) && |
| ICmpInst::isUnsigned(UnsignedPred)) |
| UnsignedPred = ICmpInst::getSwappedPredicate(UnsignedPred); |
| else |
| return nullptr; |
| |
| // X < Y && Y != 0 --> X < Y |
| // X < Y || Y != 0 --> Y != 0 |
| if (UnsignedPred == ICmpInst::ICMP_ULT && EqPred == ICmpInst::ICMP_NE) |
| return IsAnd ? UnsignedICmp : ZeroICmp; |
| |
| // X >= Y || Y != 0 --> true |
| // X >= Y || Y == 0 --> X >= Y |
| if (UnsignedPred == ICmpInst::ICMP_UGE && !IsAnd) { |
| if (EqPred == ICmpInst::ICMP_NE) |
| return getTrue(UnsignedICmp->getType()); |
| return UnsignedICmp; |
| } |
| |
| // X < Y && Y == 0 --> false |
| if (UnsignedPred == ICmpInst::ICMP_ULT && EqPred == ICmpInst::ICMP_EQ && |
| IsAnd) |
| return getFalse(UnsignedICmp->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Commuted variants are assumed to be handled by calling this function again |
| /// with the parameters swapped. |
| static Value *simplifyAndOfICmpsWithSameOperands(ICmpInst *Op0, ICmpInst *Op1) { |
| ICmpInst::Predicate Pred0, Pred1; |
| Value *A ,*B; |
| if (!match(Op0, m_ICmp(Pred0, m_Value(A), m_Value(B))) || |
| !match(Op1, m_ICmp(Pred1, m_Specific(A), m_Specific(B)))) |
| return nullptr; |
| |
| // We have (icmp Pred0, A, B) & (icmp Pred1, A, B). |
| // If Op1 is always implied true by Op0, then Op0 is a subset of Op1, and we |
| // can eliminate Op1 from this 'and'. |
| if (ICmpInst::isImpliedTrueByMatchingCmp(Pred0, Pred1)) |
| return Op0; |
| |
| // Check for any combination of predicates that are guaranteed to be disjoint. |
| if ((Pred0 == ICmpInst::getInversePredicate(Pred1)) || |
| (Pred0 == ICmpInst::ICMP_EQ && ICmpInst::isFalseWhenEqual(Pred1)) || |
| (Pred0 == ICmpInst::ICMP_SLT && Pred1 == ICmpInst::ICMP_SGT) || |
| (Pred0 == ICmpInst::ICMP_ULT && Pred1 == ICmpInst::ICMP_UGT)) |
| return getFalse(Op0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Commuted variants are assumed to be handled by calling this function again |
| /// with the parameters swapped. |
| static Value *simplifyOrOfICmpsWithSameOperands(ICmpInst *Op0, ICmpInst *Op1) { |
| ICmpInst::Predicate Pred0, Pred1; |
| Value *A ,*B; |
| if (!match(Op0, m_ICmp(Pred0, m_Value(A), m_Value(B))) || |
| !match(Op1, m_ICmp(Pred1, m_Specific(A), m_Specific(B)))) |
| return nullptr; |
| |
| // We have (icmp Pred0, A, B) | (icmp Pred1, A, B). |
| // If Op1 is always implied true by Op0, then Op0 is a subset of Op1, and we |
| // can eliminate Op0 from this 'or'. |
| if (ICmpInst::isImpliedTrueByMatchingCmp(Pred0, Pred1)) |
| return Op1; |
| |
| // Check for any combination of predicates that cover the entire range of |
| // possibilities. |
| if ((Pred0 == ICmpInst::getInversePredicate(Pred1)) || |
| (Pred0 == ICmpInst::ICMP_NE && ICmpInst::isTrueWhenEqual(Pred1)) || |
| (Pred0 == ICmpInst::ICMP_SLE && Pred1 == ICmpInst::ICMP_SGE) || |
| (Pred0 == ICmpInst::ICMP_ULE && Pred1 == ICmpInst::ICMP_UGE)) |
| return getTrue(Op0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Test if a pair of compares with a shared operand and 2 constants has an |
| /// empty set intersection, full set union, or if one compare is a superset of |
| /// the other. |
| static Value *simplifyAndOrOfICmpsWithConstants(ICmpInst *Cmp0, ICmpInst *Cmp1, |
| bool IsAnd) { |
| // Look for this pattern: {and/or} (icmp X, C0), (icmp X, C1)). |
| if (Cmp0->getOperand(0) != Cmp1->getOperand(0)) |
| return nullptr; |
| |
| const APInt *C0, *C1; |
| if (!match(Cmp0->getOperand(1), m_APInt(C0)) || |
| !match(Cmp1->getOperand(1), m_APInt(C1))) |
| return nullptr; |
| |
| auto Range0 = ConstantRange::makeExactICmpRegion(Cmp0->getPredicate(), *C0); |
| auto Range1 = ConstantRange::makeExactICmpRegion(Cmp1->getPredicate(), *C1); |
| |
| // For and-of-compares, check if the intersection is empty: |
| // (icmp X, C0) && (icmp X, C1) --> empty set --> false |
| if (IsAnd && Range0.intersectWith(Range1).isEmptySet()) |
| return getFalse(Cmp0->getType()); |
| |
| // For or-of-compares, check if the union is full: |
| // (icmp X, C0) || (icmp X, C1) --> full set --> true |
| if (!IsAnd && Range0.unionWith(Range1).isFullSet()) |
| return getTrue(Cmp0->getType()); |
| |
| // Is one range a superset of the other? |
| // If this is and-of-compares, take the smaller set: |
| // (icmp sgt X, 4) && (icmp sgt X, 42) --> icmp sgt X, 42 |
| // If this is or-of-compares, take the larger set: |
| // (icmp sgt X, 4) || (icmp sgt X, 42) --> icmp sgt X, 4 |
| if (Range0.contains(Range1)) |
| return IsAnd ? Cmp1 : Cmp0; |
| if (Range1.contains(Range0)) |
| return IsAnd ? Cmp0 : Cmp1; |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyAndOrOfICmpsWithZero(ICmpInst *Cmp0, ICmpInst *Cmp1, |
| bool IsAnd) { |
| ICmpInst::Predicate P0 = Cmp0->getPredicate(), P1 = Cmp1->getPredicate(); |
| if (!match(Cmp0->getOperand(1), m_Zero()) || |
| !match(Cmp1->getOperand(1), m_Zero()) || P0 != P1) |
| return nullptr; |
| |
| if ((IsAnd && P0 != ICmpInst::ICMP_NE) || (!IsAnd && P1 != ICmpInst::ICMP_EQ)) |
| return nullptr; |
| |
| // We have either "(X == 0 || Y == 0)" or "(X != 0 && Y != 0)". |
| Value *X = Cmp0->getOperand(0); |
| Value *Y = Cmp1->getOperand(0); |
| |
| // If one of the compares is a masked version of a (not) null check, then |
| // that compare implies the other, so we eliminate the other. Optionally, look |
| // through a pointer-to-int cast to match a null check of a pointer type. |
| |
| // (X == 0) || (([ptrtoint] X & ?) == 0) --> ([ptrtoint] X & ?) == 0 |
| // (X == 0) || ((? & [ptrtoint] X) == 0) --> (? & [ptrtoint] X) == 0 |
| // (X != 0) && (([ptrtoint] X & ?) != 0) --> ([ptrtoint] X & ?) != 0 |
| // (X != 0) && ((? & [ptrtoint] X) != 0) --> (? & [ptrtoint] X) != 0 |
| if (match(Y, m_c_And(m_Specific(X), m_Value())) || |
| match(Y, m_c_And(m_PtrToInt(m_Specific(X)), m_Value()))) |
| return Cmp1; |
| |
| // (([ptrtoint] Y & ?) == 0) || (Y == 0) --> ([ptrtoint] Y & ?) == 0 |
| // ((? & [ptrtoint] Y) == 0) || (Y == 0) --> (? & [ptrtoint] Y) == 0 |
| // (([ptrtoint] Y & ?) != 0) && (Y != 0) --> ([ptrtoint] Y & ?) != 0 |
| // ((? & [ptrtoint] Y) != 0) && (Y != 0) --> (? & [ptrtoint] Y) != 0 |
| if (match(X, m_c_And(m_Specific(Y), m_Value())) || |
| match(X, m_c_And(m_PtrToInt(m_Specific(Y)), m_Value()))) |
| return Cmp0; |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyAndOfICmpsWithAdd(ICmpInst *Op0, ICmpInst *Op1) { |
| // (icmp (add V, C0), C1) & (icmp V, C0) |
| ICmpInst::Predicate Pred0, Pred1; |
| const APInt *C0, *C1; |
| Value *V; |
| if (!match(Op0, m_ICmp(Pred0, m_Add(m_Value(V), m_APInt(C0)), m_APInt(C1)))) |
| return nullptr; |
| |
| if (!match(Op1, m_ICmp(Pred1, m_Specific(V), m_Value()))) |
| return nullptr; |
| |
| auto *AddInst = cast<BinaryOperator>(Op0->getOperand(0)); |
| if (AddInst->getOperand(1) != Op1->getOperand(1)) |
| return nullptr; |
| |
| Type *ITy = Op0->getType(); |
| bool isNSW = AddInst->hasNoSignedWrap(); |
| bool isNUW = AddInst->hasNoUnsignedWrap(); |
| |
| const APInt Delta = *C1 - *C0; |
| if (C0->isStrictlyPositive()) { |
| if (Delta == 2) { |
| if (Pred0 == ICmpInst::ICMP_ULT && Pred1 == ICmpInst::ICMP_SGT) |
| return getFalse(ITy); |
| if (Pred0 == ICmpInst::ICMP_SLT && Pred1 == ICmpInst::ICMP_SGT && isNSW) |
| return getFalse(ITy); |
| } |
| if (Delta == 1) { |
| if (Pred0 == ICmpInst::ICMP_ULE && Pred1 == ICmpInst::ICMP_SGT) |
| return getFalse(ITy); |
| if (Pred0 == ICmpInst::ICMP_SLE && Pred1 == ICmpInst::ICMP_SGT && isNSW) |
| return getFalse(ITy); |
| } |
| } |
| if (C0->getBoolValue() && isNUW) { |
| if (Delta == 2) |
| if (Pred0 == ICmpInst::ICMP_ULT && Pred1 == ICmpInst::ICMP_UGT) |
| return getFalse(ITy); |
| if (Delta == 1) |
| if (Pred0 == ICmpInst::ICMP_ULE && Pred1 == ICmpInst::ICMP_UGT) |
| return getFalse(ITy); |
| } |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyAndOfICmps(ICmpInst *Op0, ICmpInst *Op1) { |
| if (Value *X = simplifyUnsignedRangeCheck(Op0, Op1, /*IsAnd=*/true)) |
| return X; |
| if (Value *X = simplifyUnsignedRangeCheck(Op1, Op0, /*IsAnd=*/true)) |
| return X; |
| |
| if (Value *X = simplifyAndOfICmpsWithSameOperands(Op0, Op1)) |
| return X; |
| if (Value *X = simplifyAndOfICmpsWithSameOperands(Op1, Op0)) |
| return X; |
| |
| if (Value *X = simplifyAndOrOfICmpsWithConstants(Op0, Op1, true)) |
| return X; |
| |
| if (Value *X = simplifyAndOrOfICmpsWithZero(Op0, Op1, true)) |
| return X; |
| |
| if (Value *X = simplifyAndOfICmpsWithAdd(Op0, Op1)) |
| return X; |
| if (Value *X = simplifyAndOfICmpsWithAdd(Op1, Op0)) |
| return X; |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyOrOfICmpsWithAdd(ICmpInst *Op0, ICmpInst *Op1) { |
| // (icmp (add V, C0), C1) | (icmp V, C0) |
| ICmpInst::Predicate Pred0, Pred1; |
| const APInt *C0, *C1; |
| Value *V; |
| if (!match(Op0, m_ICmp(Pred0, m_Add(m_Value(V), m_APInt(C0)), m_APInt(C1)))) |
| return nullptr; |
| |
| if (!match(Op1, m_ICmp(Pred1, m_Specific(V), m_Value()))) |
| return nullptr; |
| |
| auto *AddInst = cast<BinaryOperator>(Op0->getOperand(0)); |
| if (AddInst->getOperand(1) != Op1->getOperand(1)) |
| return nullptr; |
| |
| Type *ITy = Op0->getType(); |
| bool isNSW = AddInst->hasNoSignedWrap(); |
| bool isNUW = AddInst->hasNoUnsignedWrap(); |
| |
| const APInt Delta = *C1 - *C0; |
| if (C0->isStrictlyPositive()) { |
| if (Delta == 2) { |
| if (Pred0 == ICmpInst::ICMP_UGE && Pred1 == ICmpInst::ICMP_SLE) |
| return getTrue(ITy); |
| if (Pred0 == ICmpInst::ICMP_SGE && Pred1 == ICmpInst::ICMP_SLE && isNSW) |
| return getTrue(ITy); |
| } |
| if (Delta == 1) { |
| if (Pred0 == ICmpInst::ICMP_UGT && Pred1 == ICmpInst::ICMP_SLE) |
| return getTrue(ITy); |
| if (Pred0 == ICmpInst::ICMP_SGT && Pred1 == ICmpInst::ICMP_SLE && isNSW) |
| return getTrue(ITy); |
| } |
| } |
| if (C0->getBoolValue() && isNUW) { |
| if (Delta == 2) |
| if (Pred0 == ICmpInst::ICMP_UGE && Pred1 == ICmpInst::ICMP_ULE) |
| return getTrue(ITy); |
| if (Delta == 1) |
| if (Pred0 == ICmpInst::ICMP_UGT && Pred1 == ICmpInst::ICMP_ULE) |
| return getTrue(ITy); |
| } |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyOrOfICmps(ICmpInst *Op0, ICmpInst *Op1) { |
| if (Value *X = simplifyUnsignedRangeCheck(Op0, Op1, /*IsAnd=*/false)) |
| return X; |
| if (Value *X = simplifyUnsignedRangeCheck(Op1, Op0, /*IsAnd=*/false)) |
| return X; |
| |
| if (Value *X = simplifyOrOfICmpsWithSameOperands(Op0, Op1)) |
| return X; |
| if (Value *X = simplifyOrOfICmpsWithSameOperands(Op1, Op0)) |
| return X; |
| |
| if (Value *X = simplifyAndOrOfICmpsWithConstants(Op0, Op1, false)) |
| return X; |
| |
| if (Value *X = simplifyAndOrOfICmpsWithZero(Op0, Op1, false)) |
| return X; |
| |
| if (Value *X = simplifyOrOfICmpsWithAdd(Op0, Op1)) |
| return X; |
| if (Value *X = simplifyOrOfICmpsWithAdd(Op1, Op0)) |
| return X; |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyAndOrOfFCmps(FCmpInst *LHS, FCmpInst *RHS, bool IsAnd) { |
| Value *LHS0 = LHS->getOperand(0), *LHS1 = LHS->getOperand(1); |
| Value *RHS0 = RHS->getOperand(0), *RHS1 = RHS->getOperand(1); |
| if (LHS0->getType() != RHS0->getType()) |
| return nullptr; |
| |
| FCmpInst::Predicate PredL = LHS->getPredicate(), PredR = RHS->getPredicate(); |
| if ((PredL == FCmpInst::FCMP_ORD && PredR == FCmpInst::FCMP_ORD && IsAnd) || |
| (PredL == FCmpInst::FCMP_UNO && PredR == FCmpInst::FCMP_UNO && !IsAnd)) { |
| // (fcmp ord NNAN, X) & (fcmp ord X, Y) --> fcmp ord X, Y |
| // (fcmp ord NNAN, X) & (fcmp ord Y, X) --> fcmp ord Y, X |
| // (fcmp ord X, NNAN) & (fcmp ord X, Y) --> fcmp ord X, Y |
| // (fcmp ord X, NNAN) & (fcmp ord Y, X) --> fcmp ord Y, X |
| // (fcmp uno NNAN, X) | (fcmp uno X, Y) --> fcmp uno X, Y |
| // (fcmp uno NNAN, X) | (fcmp uno Y, X) --> fcmp uno Y, X |
| // (fcmp uno X, NNAN) | (fcmp uno X, Y) --> fcmp uno X, Y |
| // (fcmp uno X, NNAN) | (fcmp uno Y, X) --> fcmp uno Y, X |
| if ((isKnownNeverNaN(LHS0) && (LHS1 == RHS0 || LHS1 == RHS1)) || |
| (isKnownNeverNaN(LHS1) && (LHS0 == RHS0 || LHS0 == RHS1))) |
| return RHS; |
| |
| // (fcmp ord X, Y) & (fcmp ord NNAN, X) --> fcmp ord X, Y |
| // (fcmp ord Y, X) & (fcmp ord NNAN, X) --> fcmp ord Y, X |
| // (fcmp ord X, Y) & (fcmp ord X, NNAN) --> fcmp ord X, Y |
| // (fcmp ord Y, X) & (fcmp ord X, NNAN) --> fcmp ord Y, X |
| // (fcmp uno X, Y) | (fcmp uno NNAN, X) --> fcmp uno X, Y |
| // (fcmp uno Y, X) | (fcmp uno NNAN, X) --> fcmp uno Y, X |
| // (fcmp uno X, Y) | (fcmp uno X, NNAN) --> fcmp uno X, Y |
| // (fcmp uno Y, X) | (fcmp uno X, NNAN) --> fcmp uno Y, X |
| if ((isKnownNeverNaN(RHS0) && (RHS1 == LHS0 || RHS1 == LHS1)) || |
| (isKnownNeverNaN(RHS1) && (RHS0 == LHS0 || RHS0 == LHS1))) |
| return LHS; |
| } |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyAndOrOfCmps(Value *Op0, Value *Op1, bool IsAnd) { |
| // Look through casts of the 'and' operands to find compares. |
| auto *Cast0 = dyn_cast<CastInst>(Op0); |
| auto *Cast1 = dyn_cast<CastInst>(Op1); |
| if (Cast0 && Cast1 && Cast0->getOpcode() == Cast1->getOpcode() && |
| Cast0->getSrcTy() == Cast1->getSrcTy()) { |
| Op0 = Cast0->getOperand(0); |
| Op1 = Cast1->getOperand(0); |
| } |
| |
| Value *V = nullptr; |
| auto *ICmp0 = dyn_cast<ICmpInst>(Op0); |
| auto *ICmp1 = dyn_cast<ICmpInst>(Op1); |
| if (ICmp0 && ICmp1) |
| V = IsAnd ? simplifyAndOfICmps(ICmp0, ICmp1) : |
| simplifyOrOfICmps(ICmp0, ICmp1); |
| |
| auto *FCmp0 = dyn_cast<FCmpInst>(Op0); |
| auto *FCmp1 = dyn_cast<FCmpInst>(Op1); |
| if (FCmp0 && FCmp1) |
| V = simplifyAndOrOfFCmps(FCmp0, FCmp1, IsAnd); |
| |
| if (!V) |
| return nullptr; |
| if (!Cast0) |
| return V; |
| |
| // If we looked through casts, we can only handle a constant simplification |
| // because we are not allowed to create a cast instruction here. |
| if (auto *C = dyn_cast<Constant>(V)) |
| return ConstantExpr::getCast(Cast0->getOpcode(), C, Cast0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an And, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyAndInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::And, Op0, Op1, Q)) |
| return C; |
| |
| // X & undef -> 0 |
| if (match(Op1, m_Undef())) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X & X = X |
| if (Op0 == Op1) |
| return Op0; |
| |
| // X & 0 = 0 |
| if (match(Op1, m_Zero())) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // X & -1 = X |
| if (match(Op1, m_AllOnes())) |
| return Op0; |
| |
| // A & ~A = ~A & A = 0 |
| if (match(Op0, m_Not(m_Specific(Op1))) || |
| match(Op1, m_Not(m_Specific(Op0)))) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // (A | ?) & A = A |
| if (match(Op0, m_c_Or(m_Specific(Op1), m_Value()))) |
| return Op1; |
| |
| // A & (A | ?) = A |
| if (match(Op1, m_c_Or(m_Specific(Op0), m_Value()))) |
| return Op0; |
| |
| // A mask that only clears known zeros of a shifted value is a no-op. |
| Value *X; |
| const APInt *Mask; |
| const APInt *ShAmt; |
| if (match(Op1, m_APInt(Mask))) { |
| // If all bits in the inverted and shifted mask are clear: |
| // and (shl X, ShAmt), Mask --> shl X, ShAmt |
| if (match(Op0, m_Shl(m_Value(X), m_APInt(ShAmt))) && |
| (~(*Mask)).lshr(*ShAmt).isNullValue()) |
| return Op0; |
| |
| // If all bits in the inverted and shifted mask are clear: |
| // and (lshr X, ShAmt), Mask --> lshr X, ShAmt |
| if (match(Op0, m_LShr(m_Value(X), m_APInt(ShAmt))) && |
| (~(*Mask)).shl(*ShAmt).isNullValue()) |
| return Op0; |
| } |
| |
| // A & (-A) = A if A is a power of two or zero. |
| if (match(Op0, m_Neg(m_Specific(Op1))) || |
| match(Op1, m_Neg(m_Specific(Op0)))) { |
| if (isKnownToBeAPowerOfTwo(Op0, Q.DL, /*OrZero*/ true, 0, Q.AC, Q.CxtI, |
| Q.DT)) |
| return Op0; |
| if (isKnownToBeAPowerOfTwo(Op1, Q.DL, /*OrZero*/ true, 0, Q.AC, Q.CxtI, |
| Q.DT)) |
| return Op1; |
| } |
| |
| if (Value *V = simplifyAndOrOfCmps(Op0, Op1, true)) |
| return V; |
| |
| // Try some generic simplifications for associative operations. |
| if (Value *V = SimplifyAssociativeBinOp(Instruction::And, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // And distributes over Or. Try some generic simplifications based on this. |
| if (Value *V = ExpandBinOp(Instruction::And, Op0, Op1, Instruction::Or, |
| Q, MaxRecurse)) |
| return V; |
| |
| // And distributes over Xor. Try some generic simplifications based on this. |
| if (Value *V = ExpandBinOp(Instruction::And, Op0, Op1, Instruction::Xor, |
| Q, MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Instruction::And, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Instruction::And, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // Assuming the effective width of Y is not larger than A, i.e. all bits |
| // from X and Y are disjoint in (X << A) | Y, |
| // if the mask of this AND op covers all bits of X or Y, while it covers |
| // no bits from the other, we can bypass this AND op. E.g., |
| // ((X << A) | Y) & Mask -> Y, |
| // if Mask = ((1 << effective_width_of(Y)) - 1) |
| // ((X << A) | Y) & Mask -> X << A, |
| // if Mask = ((1 << effective_width_of(X)) - 1) << A |
| // SimplifyDemandedBits in InstCombine can optimize the general case. |
| // This pattern aims to help other passes for a common case. |
| Value *Y, *XShifted; |
| if (match(Op1, m_APInt(Mask)) && |
| match(Op0, m_c_Or(m_CombineAnd(m_NUWShl(m_Value(X), m_APInt(ShAmt)), |
| m_Value(XShifted)), |
| m_Value(Y)))) { |
| const unsigned Width = Op0->getType()->getScalarSizeInBits(); |
| const unsigned ShftCnt = ShAmt->getLimitedValue(Width); |
| const KnownBits YKnown = computeKnownBits(Y, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| const unsigned EffWidthY = Width - YKnown.countMinLeadingZeros(); |
| if (EffWidthY <= ShftCnt) { |
| const KnownBits XKnown = computeKnownBits(X, Q.DL, 0, Q.AC, Q.CxtI, |
| Q.DT); |
| const unsigned EffWidthX = Width - XKnown.countMinLeadingZeros(); |
| const APInt EffBitsY = APInt::getLowBitsSet(Width, EffWidthY); |
| const APInt EffBitsX = APInt::getLowBitsSet(Width, EffWidthX) << ShftCnt; |
| // If the mask is extracting all bits from X or Y as is, we can skip |
| // this AND op. |
| if (EffBitsY.isSubsetOf(*Mask) && !EffBitsX.intersects(*Mask)) |
| return Y; |
| if (EffBitsX.isSubsetOf(*Mask) && !EffBitsY.intersects(*Mask)) |
| return XShifted; |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyAndInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyAndInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an Or, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyOrInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::Or, Op0, Op1, Q)) |
| return C; |
| |
| // X | undef -> -1 |
| // X | -1 = -1 |
| // Do not return Op1 because it may contain undef elements if it's a vector. |
| if (match(Op1, m_Undef()) || match(Op1, m_AllOnes())) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| // X | X = X |
| // X | 0 = X |
| if (Op0 == Op1 || match(Op1, m_Zero())) |
| return Op0; |
| |
| // A | ~A = ~A | A = -1 |
| if (match(Op0, m_Not(m_Specific(Op1))) || |
| match(Op1, m_Not(m_Specific(Op0)))) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| // (A & ?) | A = A |
| if (match(Op0, m_c_And(m_Specific(Op1), m_Value()))) |
| return Op1; |
| |
| // A | (A & ?) = A |
| if (match(Op1, m_c_And(m_Specific(Op0), m_Value()))) |
| return Op0; |
| |
| // ~(A & ?) | A = -1 |
| if (match(Op0, m_Not(m_c_And(m_Specific(Op1), m_Value())))) |
| return Constant::getAllOnesValue(Op1->getType()); |
| |
| // A | ~(A & ?) = -1 |
| if (match(Op1, m_Not(m_c_And(m_Specific(Op1), m_Value())))) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| Value *A, *B; |
| // (A & ~B) | (A ^ B) -> (A ^ B) |
| // (~B & A) | (A ^ B) -> (A ^ B) |
| // (A & ~B) | (B ^ A) -> (B ^ A) |
| // (~B & A) | (B ^ A) -> (B ^ A) |
| if (match(Op1, m_Xor(m_Value(A), m_Value(B))) && |
| (match(Op0, m_c_And(m_Specific(A), m_Not(m_Specific(B)))) || |
| match(Op0, m_c_And(m_Not(m_Specific(A)), m_Specific(B))))) |
| return Op1; |
| |
| // Commute the 'or' operands. |
| // (A ^ B) | (A & ~B) -> (A ^ B) |
| // (A ^ B) | (~B & A) -> (A ^ B) |
| // (B ^ A) | (A & ~B) -> (B ^ A) |
| // (B ^ A) | (~B & A) -> (B ^ A) |
| if (match(Op0, m_Xor(m_Value(A), m_Value(B))) && |
| (match(Op1, m_c_And(m_Specific(A), m_Not(m_Specific(B)))) || |
| match(Op1, m_c_And(m_Not(m_Specific(A)), m_Specific(B))))) |
| return Op0; |
| |
| // (A & B) | (~A ^ B) -> (~A ^ B) |
| // (B & A) | (~A ^ B) -> (~A ^ B) |
| // (A & B) | (B ^ ~A) -> (B ^ ~A) |
| // (B & A) | (B ^ ~A) -> (B ^ ~A) |
| if (match(Op0, m_And(m_Value(A), m_Value(B))) && |
| (match(Op1, m_c_Xor(m_Specific(A), m_Not(m_Specific(B)))) || |
| match(Op1, m_c_Xor(m_Not(m_Specific(A)), m_Specific(B))))) |
| return Op1; |
| |
| // (~A ^ B) | (A & B) -> (~A ^ B) |
| // (~A ^ B) | (B & A) -> (~A ^ B) |
| // (B ^ ~A) | (A & B) -> (B ^ ~A) |
| // (B ^ ~A) | (B & A) -> (B ^ ~A) |
| if (match(Op1, m_And(m_Value(A), m_Value(B))) && |
| (match(Op0, m_c_Xor(m_Specific(A), m_Not(m_Specific(B)))) || |
| match(Op0, m_c_Xor(m_Not(m_Specific(A)), m_Specific(B))))) |
| return Op0; |
| |
| if (Value *V = simplifyAndOrOfCmps(Op0, Op1, false)) |
| return V; |
| |
| // Try some generic simplifications for associative operations. |
| if (Value *V = SimplifyAssociativeBinOp(Instruction::Or, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // Or distributes over And. Try some generic simplifications based on this. |
| if (Value *V = ExpandBinOp(Instruction::Or, Op0, Op1, Instruction::And, Q, |
| MaxRecurse)) |
| return V; |
| |
| // If the operation is with the result of a select instruction, check whether |
| // operating on either branch of the select always yields the same value. |
| if (isa<SelectInst>(Op0) || isa<SelectInst>(Op1)) |
| if (Value *V = ThreadBinOpOverSelect(Instruction::Or, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // (A & C1)|(B & C2) |
| const APInt *C1, *C2; |
| if (match(Op0, m_And(m_Value(A), m_APInt(C1))) && |
| match(Op1, m_And(m_Value(B), m_APInt(C2)))) { |
| if (*C1 == ~*C2) { |
| // (A & C1)|(B & C2) |
| // If we have: ((V + N) & C1) | (V & C2) |
| // .. and C2 = ~C1 and C2 is 0+1+ and (N & C2) == 0 |
| // replace with V+N. |
| Value *N; |
| if (C2->isMask() && // C2 == 0+1+ |
| match(A, m_c_Add(m_Specific(B), m_Value(N)))) { |
| // Add commutes, try both ways. |
| if (MaskedValueIsZero(N, *C2, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return A; |
| } |
| // Or commutes, try both ways. |
| if (C1->isMask() && |
| match(B, m_c_Add(m_Specific(A), m_Value(N)))) { |
| // Add commutes, try both ways. |
| if (MaskedValueIsZero(N, *C1, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return B; |
| } |
| } |
| } |
| |
| // If the operation is with the result of a phi instruction, check whether |
| // operating on all incoming values of the phi always yields the same value. |
| if (isa<PHINode>(Op0) || isa<PHINode>(Op1)) |
| if (Value *V = ThreadBinOpOverPHI(Instruction::Or, Op0, Op1, Q, MaxRecurse)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyOrInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyOrInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| /// Given operands for a Xor, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyXorInst(Value *Op0, Value *Op1, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::Xor, Op0, Op1, Q)) |
| return C; |
| |
| // A ^ undef -> undef |
| if (match(Op1, m_Undef())) |
| return Op1; |
| |
| // A ^ 0 = A |
| if (match(Op1, m_Zero())) |
| return Op0; |
| |
| // A ^ A = 0 |
| if (Op0 == Op1) |
| return Constant::getNullValue(Op0->getType()); |
| |
| // A ^ ~A = ~A ^ A = -1 |
| if (match(Op0, m_Not(m_Specific(Op1))) || |
| match(Op1, m_Not(m_Specific(Op0)))) |
| return Constant::getAllOnesValue(Op0->getType()); |
| |
| // Try some generic simplifications for associative operations. |
| if (Value *V = SimplifyAssociativeBinOp(Instruction::Xor, Op0, Op1, Q, |
| MaxRecurse)) |
| return V; |
| |
| // Threading Xor over selects and phi nodes is pointless, so don't bother. |
| // Threading over the select in "A ^ select(cond, B, C)" means evaluating |
| // "A^B" and "A^C" and seeing if they are equal; but they are equal if and |
| // only if B and C are equal. If B and C are equal then (since we assume |
| // that operands have already been simplified) "select(cond, B, C)" should |
| // have been simplified to the common value of B and C already. Analysing |
| // "A^B" and "A^C" thus gains nothing, but costs compile time. Similarly |
| // for threading over phi nodes. |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyXorInst(Value *Op0, Value *Op1, const SimplifyQuery &Q) { |
| return ::SimplifyXorInst(Op0, Op1, Q, RecursionLimit); |
| } |
| |
| |
| static Type *GetCompareTy(Value *Op) { |
| return CmpInst::makeCmpResultType(Op->getType()); |
| } |
| |
| /// Rummage around inside V looking for something equivalent to the comparison |
| /// "LHS Pred RHS". Return such a value if found, otherwise return null. |
| /// Helper function for analyzing max/min idioms. |
| static Value *ExtractEquivalentCondition(Value *V, CmpInst::Predicate Pred, |
| Value *LHS, Value *RHS) { |
| SelectInst *SI = dyn_cast<SelectInst>(V); |
| if (!SI) |
| return nullptr; |
| CmpInst *Cmp = dyn_cast<CmpInst>(SI->getCondition()); |
| if (!Cmp) |
| return nullptr; |
| Value *CmpLHS = Cmp->getOperand(0), *CmpRHS = Cmp->getOperand(1); |
| if (Pred == Cmp->getPredicate() && LHS == CmpLHS && RHS == CmpRHS) |
| return Cmp; |
| if (Pred == CmpInst::getSwappedPredicate(Cmp->getPredicate()) && |
| LHS == CmpRHS && RHS == CmpLHS) |
| return Cmp; |
| return nullptr; |
| } |
| |
| // A significant optimization not implemented here is assuming that alloca |
| // addresses are not equal to incoming argument values. They don't *alias*, |
| // as we say, but that doesn't mean they aren't equal, so we take a |
| // conservative approach. |
| // |
| // This is inspired in part by C++11 5.10p1: |
| // "Two pointers of the same type compare equal if and only if they are both |
| // null, both point to the same function, or both represent the same |
| // address." |
| // |
| // This is pretty permissive. |
| // |
| // It's also partly due to C11 6.5.9p6: |
| // "Two pointers compare equal if and only if both are null pointers, both are |
| // pointers to the same object (including a pointer to an object and a |
| // subobject at its beginning) or function, both are pointers to one past the |
| // last element of the same array object, or one is a pointer to one past the |
| // end of one array object and the other is a pointer to the start of a |
| // different array object that happens to immediately follow the first array |
| // object in the address space.) |
| // |
| // C11's version is more restrictive, however there's no reason why an argument |
| // couldn't be a one-past-the-end value for a stack object in the caller and be |
| // equal to the beginning of a stack object in the callee. |
| // |
| // If the C and C++ standards are ever made sufficiently restrictive in this |
| // area, it may be possible to update LLVM's semantics accordingly and reinstate |
| // this optimization. |
| static Constant * |
| computePointerICmp(const DataLayout &DL, const TargetLibraryInfo *TLI, |
| const DominatorTree *DT, CmpInst::Predicate Pred, |
| AssumptionCache *AC, const Instruction *CxtI, |
| Value *LHS, Value *RHS) { |
| // First, skip past any trivial no-ops. |
| LHS = LHS->stripPointerCasts(); |
| RHS = RHS->stripPointerCasts(); |
| |
| // A non-null pointer is not equal to a null pointer. |
| if (llvm::isKnownNonZero(LHS, DL) && isa<ConstantPointerNull>(RHS) && |
| (Pred == CmpInst::ICMP_EQ || Pred == CmpInst::ICMP_NE)) |
| return ConstantInt::get(GetCompareTy(LHS), |
| !CmpInst::isTrueWhenEqual(Pred)); |
| |
| // We can only fold certain predicates on pointer comparisons. |
| switch (Pred) { |
| default: |
| return nullptr; |
| |
| // Equality comaprisons are easy to fold. |
| case CmpInst::ICMP_EQ: |
| case CmpInst::ICMP_NE: |
| break; |
| |
| // We can only handle unsigned relational comparisons because 'inbounds' on |
| // a GEP only protects against unsigned wrapping. |
| case CmpInst::ICMP_UGT: |
| case CmpInst::ICMP_UGE: |
| case CmpInst::ICMP_ULT: |
| case CmpInst::ICMP_ULE: |
| // However, we have to switch them to their signed variants to handle |
| // negative indices from the base pointer. |
| Pred = ICmpInst::getSignedPredicate(Pred); |
| break; |
| } |
| |
| // Strip off any constant offsets so that we can reason about them. |
| // It's tempting to use getUnderlyingObject or even just stripInBoundsOffsets |
| // here and compare base addresses like AliasAnalysis does, however there are |
| // numerous hazards. AliasAnalysis and its utilities rely on special rules |
| // governing loads and stores which don't apply to icmps. Also, AliasAnalysis |
| // doesn't need to guarantee pointer inequality when it says NoAlias. |
| Constant *LHSOffset = stripAndComputeConstantOffsets(DL, LHS); |
| Constant *RHSOffset = stripAndComputeConstantOffsets(DL, RHS); |
| |
| // If LHS and RHS are related via constant offsets to the same base |
| // value, we can replace it with an icmp which just compares the offsets. |
| if (LHS == RHS) |
| return ConstantExpr::getICmp(Pred, LHSOffset, RHSOffset); |
| |
| // Various optimizations for (in)equality comparisons. |
| if (Pred == CmpInst::ICMP_EQ || Pred == CmpInst::ICMP_NE) { |
| // Different non-empty allocations that exist at the same time have |
| // different addresses (if the program can tell). Global variables always |
| // exist, so they always exist during the lifetime of each other and all |
| // allocas. Two different allocas usually have different addresses... |
| // |
| // However, if there's an @llvm.stackrestore dynamically in between two |
| // allocas, they may have the same address. It's tempting to reduce the |
| // scope of the problem by only looking at *static* allocas here. That would |
| // cover the majority of allocas while significantly reducing the likelihood |
| // of having an @llvm.stackrestore pop up in the middle. However, it's not |
| // actually impossible for an @llvm.stackrestore to pop up in the middle of |
| // an entry block. Also, if we have a block that's not attached to a |
| // function, we can't tell if it's "static" under the current definition. |
| // Theoretically, this problem could be fixed by creating a new kind of |
| // instruction kind specifically for static allocas. Such a new instruction |
| // could be required to be at the top of the entry block, thus preventing it |
| // from being subject to a @llvm.stackrestore. Instcombine could even |
| // convert regular allocas into these special allocas. It'd be nifty. |
| // However, until then, this problem remains open. |
| // |
| // So, we'll assume that two non-empty allocas have different addresses |
| // for now. |
| // |
| // With all that, if the offsets are within the bounds of their allocations |
| // (and not one-past-the-end! so we can't use inbounds!), and their |
| // allocations aren't the same, the pointers are not equal. |
| // |
| // Note that it's not necessary to check for LHS being a global variable |
| // address, due to canonicalization and constant folding. |
| if (isa<AllocaInst>(LHS) && |
| (isa<AllocaInst>(RHS) || isa<GlobalVariable>(RHS))) { |
| ConstantInt *LHSOffsetCI = dyn_cast<ConstantInt>(LHSOffset); |
| ConstantInt *RHSOffsetCI = dyn_cast<ConstantInt>(RHSOffset); |
| uint64_t LHSSize, RHSSize; |
| ObjectSizeOpts Opts; |
| Opts.NullIsUnknownSize = |
| NullPointerIsDefined(cast<AllocaInst>(LHS)->getFunction()); |
| if (LHSOffsetCI && RHSOffsetCI && |
| getObjectSize(LHS, LHSSize, DL, TLI, Opts) && |
| getObjectSize(RHS, RHSSize, DL, TLI, Opts)) { |
| const APInt &LHSOffsetValue = LHSOffsetCI->getValue(); |
| const APInt &RHSOffsetValue = RHSOffsetCI->getValue(); |
| if (!LHSOffsetValue.isNegative() && |
| !RHSOffsetValue.isNegative() && |
| LHSOffsetValue.ult(LHSSize) && |
| RHSOffsetValue.ult(RHSSize)) { |
| return ConstantInt::get(GetCompareTy(LHS), |
| !CmpInst::isTrueWhenEqual(Pred)); |
| } |
| } |
| |
| // Repeat the above check but this time without depending on DataLayout |
| // or being able to compute a precise size. |
| if (!cast<PointerType>(LHS->getType())->isEmptyTy() && |
| !cast<PointerType>(RHS->getType())->isEmptyTy() && |
| LHSOffset->isNullValue() && |
| RHSOffset->isNullValue()) |
| return ConstantInt::get(GetCompareTy(LHS), |
| !CmpInst::isTrueWhenEqual(Pred)); |
| } |
| |
| // Even if an non-inbounds GEP occurs along the path we can still optimize |
| // equality comparisons concerning the result. We avoid walking the whole |
| // chain again by starting where the last calls to |
| // stripAndComputeConstantOffsets left off and accumulate the offsets. |
| Constant *LHSNoBound = stripAndComputeConstantOffsets(DL, LHS, true); |
| Constant *RHSNoBound = stripAndComputeConstantOffsets(DL, RHS, true); |
| if (LHS == RHS) |
| return ConstantExpr::getICmp(Pred, |
| ConstantExpr::getAdd(LHSOffset, LHSNoBound), |
| ConstantExpr::getAdd(RHSOffset, RHSNoBound)); |
| |
| // If one side of the equality comparison must come from a noalias call |
| // (meaning a system memory allocation function), and the other side must |
| // come from a pointer that cannot overlap with dynamically-allocated |
| // memory within the lifetime of the current function (allocas, byval |
| // arguments, globals), then determine the comparison result here. |
| SmallVector<Value *, 8> LHSUObjs, RHSUObjs; |
| GetUnderlyingObjects(LHS, LHSUObjs, DL); |
| GetUnderlyingObjects(RHS, RHSUObjs, DL); |
| |
| // Is the set of underlying objects all noalias calls? |
| auto IsNAC = [](ArrayRef<Value *> Objects) { |
| return all_of(Objects, isNoAliasCall); |
| }; |
| |
| // Is the set of underlying objects all things which must be disjoint from |
| // noalias calls. For allocas, we consider only static ones (dynamic |
| // allocas might be transformed into calls to malloc not simultaneously |
| // live with the compared-to allocation). For globals, we exclude symbols |
| // that might be resolve lazily to symbols in another dynamically-loaded |
| // library (and, thus, could be malloc'ed by the implementation). |
| auto IsAllocDisjoint = [](ArrayRef<Value *> Objects) { |
| return all_of(Objects, [](Value *V) { |
| if (const AllocaInst *AI = dyn_cast<AllocaInst>(V)) |
| return AI->getParent() && AI->getFunction() && AI->isStaticAlloca(); |
| if (const GlobalValue *GV = dyn_cast<GlobalValue>(V)) |
| return (GV->hasLocalLinkage() || GV->hasHiddenVisibility() || |
| GV->hasProtectedVisibility() || GV->hasGlobalUnnamedAddr()) && |
| !GV->isThreadLocal(); |
| if (const Argument *A = dyn_cast<Argument>(V)) |
| return A->hasByValAttr(); |
| return false; |
| }); |
| }; |
| |
| if ((IsNAC(LHSUObjs) && IsAllocDisjoint(RHSUObjs)) || |
| (IsNAC(RHSUObjs) && IsAllocDisjoint(LHSUObjs))) |
| return ConstantInt::get(GetCompareTy(LHS), |
| !CmpInst::isTrueWhenEqual(Pred)); |
| |
| // Fold comparisons for non-escaping pointer even if the allocation call |
| // cannot be elided. We cannot fold malloc comparison to null. Also, the |
| // dynamic allocation call could be either of the operands. |
| Value *MI = nullptr; |
| if (isAllocLikeFn(LHS, TLI) && |
| llvm::isKnownNonZero(RHS, DL, 0, nullptr, CxtI, DT)) |
| MI = LHS; |
| else if (isAllocLikeFn(RHS, TLI) && |
| llvm::isKnownNonZero(LHS, DL, 0, nullptr, CxtI, DT)) |
| MI = RHS; |
| // FIXME: We should also fold the compare when the pointer escapes, but the |
| // compare dominates the pointer escape |
| if (MI && !PointerMayBeCaptured(MI, true, true)) |
| return ConstantInt::get(GetCompareTy(LHS), |
| CmpInst::isFalseWhenEqual(Pred)); |
| } |
| |
| // Otherwise, fail. |
| return nullptr; |
| } |
| |
| /// Fold an icmp when its operands have i1 scalar type. |
| static Value *simplifyICmpOfBools(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q) { |
| Type *ITy = GetCompareTy(LHS); // The return type. |
| Type *OpTy = LHS->getType(); // The operand type. |
| if (!OpTy->isIntOrIntVectorTy(1)) |
| return nullptr; |
| |
| // A boolean compared to true/false can be simplified in 14 out of the 20 |
| // (10 predicates * 2 constants) possible combinations. Cases not handled here |
| // require a 'not' of the LHS, so those must be transformed in InstCombine. |
| if (match(RHS, m_Zero())) { |
| switch (Pred) { |
| case CmpInst::ICMP_NE: // X != 0 -> X |
| case CmpInst::ICMP_UGT: // X >u 0 -> X |
| case CmpInst::ICMP_SLT: // X <s 0 -> X |
| return LHS; |
| |
| case CmpInst::ICMP_ULT: // X <u 0 -> false |
| case CmpInst::ICMP_SGT: // X >s 0 -> false |
| return getFalse(ITy); |
| |
| case CmpInst::ICMP_UGE: // X >=u 0 -> true |
| case CmpInst::ICMP_SLE: // X <=s 0 -> true |
| return getTrue(ITy); |
| |
| default: break; |
| } |
| } else if (match(RHS, m_One())) { |
| switch (Pred) { |
| case CmpInst::ICMP_EQ: // X == 1 -> X |
| case CmpInst::ICMP_UGE: // X >=u 1 -> X |
| case CmpInst::ICMP_SLE: // X <=s -1 -> X |
| return LHS; |
| |
| case CmpInst::ICMP_UGT: // X >u 1 -> false |
| case CmpInst::ICMP_SLT: // X <s -1 -> false |
| return getFalse(ITy); |
| |
| case CmpInst::ICMP_ULE: // X <=u 1 -> true |
| case CmpInst::ICMP_SGE: // X >=s -1 -> true |
| return getTrue(ITy); |
| |
| default: break; |
| } |
| } |
| |
| switch (Pred) { |
| default: |
| break; |
| case ICmpInst::ICMP_UGE: |
| if (isImpliedCondition(RHS, LHS, Q.DL).getValueOr(false)) |
| return getTrue(ITy); |
| break; |
| case ICmpInst::ICMP_SGE: |
| /// For signed comparison, the values for an i1 are 0 and -1 |
| /// respectively. This maps into a truth table of: |
| /// LHS | RHS | LHS >=s RHS | LHS implies RHS |
| /// 0 | 0 | 1 (0 >= 0) | 1 |
| /// 0 | 1 | 1 (0 >= -1) | 1 |
| /// 1 | 0 | 0 (-1 >= 0) | 0 |
| /// 1 | 1 | 1 (-1 >= -1) | 1 |
| if (isImpliedCondition(LHS, RHS, Q.DL).getValueOr(false)) |
| return getTrue(ITy); |
| break; |
| case ICmpInst::ICMP_ULE: |
| if (isImpliedCondition(LHS, RHS, Q.DL).getValueOr(false)) |
| return getTrue(ITy); |
| break; |
| } |
| |
| return nullptr; |
| } |
| |
| /// Try hard to fold icmp with zero RHS because this is a common case. |
| static Value *simplifyICmpWithZero(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q) { |
| if (!match(RHS, m_Zero())) |
| return nullptr; |
| |
| Type *ITy = GetCompareTy(LHS); // The return type. |
| switch (Pred) { |
| default: |
| llvm_unreachable("Unknown ICmp predicate!"); |
| case ICmpInst::ICMP_ULT: |
| return getFalse(ITy); |
| case ICmpInst::ICMP_UGE: |
| return getTrue(ITy); |
| case ICmpInst::ICMP_EQ: |
| case ICmpInst::ICMP_ULE: |
| if (isKnownNonZero(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return getFalse(ITy); |
| break; |
| case ICmpInst::ICMP_NE: |
| case ICmpInst::ICMP_UGT: |
| if (isKnownNonZero(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return getTrue(ITy); |
| break; |
| case ICmpInst::ICMP_SLT: { |
| KnownBits LHSKnown = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (LHSKnown.isNegative()) |
| return getTrue(ITy); |
| if (LHSKnown.isNonNegative()) |
| return getFalse(ITy); |
| break; |
| } |
| case ICmpInst::ICMP_SLE: { |
| KnownBits LHSKnown = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (LHSKnown.isNegative()) |
| return getTrue(ITy); |
| if (LHSKnown.isNonNegative() && |
| isKnownNonZero(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return getFalse(ITy); |
| break; |
| } |
| case ICmpInst::ICMP_SGE: { |
| KnownBits LHSKnown = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (LHSKnown.isNegative()) |
| return getFalse(ITy); |
| if (LHSKnown.isNonNegative()) |
| return getTrue(ITy); |
| break; |
| } |
| case ICmpInst::ICMP_SGT: { |
| KnownBits LHSKnown = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (LHSKnown.isNegative()) |
| return getFalse(ITy); |
| if (LHSKnown.isNonNegative() && |
| isKnownNonZero(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT)) |
| return getTrue(ITy); |
| break; |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| /// Many binary operators with a constant operand have an easy-to-compute |
| /// range of outputs. This can be used to fold a comparison to always true or |
| /// always false. |
| static void setLimitsForBinOp(BinaryOperator &BO, APInt &Lower, APInt &Upper) { |
| unsigned Width = Lower.getBitWidth(); |
| const APInt *C; |
| switch (BO.getOpcode()) { |
| case Instruction::Add: |
| if (match(BO.getOperand(1), m_APInt(C)) && !C->isNullValue()) { |
| // FIXME: If we have both nuw and nsw, we should reduce the range further. |
| if (BO.hasNoUnsignedWrap()) { |
| // 'add nuw x, C' produces [C, UINT_MAX]. |
| Lower = *C; |
| } else if (BO.hasNoSignedWrap()) { |
| if (C->isNegative()) { |
| // 'add nsw x, -C' produces [SINT_MIN, SINT_MAX - C]. |
| Lower = APInt::getSignedMinValue(Width); |
| Upper = APInt::getSignedMaxValue(Width) + *C + 1; |
| } else { |
| // 'add nsw x, +C' produces [SINT_MIN + C, SINT_MAX]. |
| Lower = APInt::getSignedMinValue(Width) + *C; |
| Upper = APInt::getSignedMaxValue(Width) + 1; |
| } |
| } |
| } |
| break; |
| |
| case Instruction::And: |
| if (match(BO.getOperand(1), m_APInt(C))) |
| // 'and x, C' produces [0, C]. |
| Upper = *C + 1; |
| break; |
| |
| case Instruction::Or: |
| if (match(BO.getOperand(1), m_APInt(C))) |
| // 'or x, C' produces [C, UINT_MAX]. |
| Lower = *C; |
| break; |
| |
| case Instruction::AShr: |
| if (match(BO.getOperand(1), m_APInt(C)) && C->ult(Width)) { |
| // 'ashr x, C' produces [INT_MIN >> C, INT_MAX >> C]. |
| Lower = APInt::getSignedMinValue(Width).ashr(*C); |
| Upper = APInt::getSignedMaxValue(Width).ashr(*C) + 1; |
| } else if (match(BO.getOperand(0), m_APInt(C))) { |
| unsigned ShiftAmount = Width - 1; |
| if (!C->isNullValue() && BO.isExact()) |
| ShiftAmount = C->countTrailingZeros(); |
| if (C->isNegative()) { |
| // 'ashr C, x' produces [C, C >> (Width-1)] |
| Lower = *C; |
| Upper = C->ashr(ShiftAmount) + 1; |
| } else { |
| // 'ashr C, x' produces [C >> (Width-1), C] |
| Lower = C->ashr(ShiftAmount); |
| Upper = *C + 1; |
| } |
| } |
| break; |
| |
| case Instruction::LShr: |
| if (match(BO.getOperand(1), m_APInt(C)) && C->ult(Width)) { |
| // 'lshr x, C' produces [0, UINT_MAX >> C]. |
| Upper = APInt::getAllOnesValue(Width).lshr(*C) + 1; |
| } else if (match(BO.getOperand(0), m_APInt(C))) { |
| // 'lshr C, x' produces [C >> (Width-1), C]. |
| unsigned ShiftAmount = Width - 1; |
| if (!C->isNullValue() && BO.isExact()) |
| ShiftAmount = C->countTrailingZeros(); |
| Lower = C->lshr(ShiftAmount); |
| Upper = *C + 1; |
| } |
| break; |
| |
| case Instruction::Shl: |
| if (match(BO.getOperand(0), m_APInt(C))) { |
| if (BO.hasNoUnsignedWrap()) { |
| // 'shl nuw C, x' produces [C, C << CLZ(C)] |
| Lower = *C; |
| Upper = Lower.shl(Lower.countLeadingZeros()) + 1; |
| } else if (BO.hasNoSignedWrap()) { // TODO: What if both nuw+nsw? |
| if (C->isNegative()) { |
| // 'shl nsw C, x' produces [C << CLO(C)-1, C] |
| unsigned ShiftAmount = C->countLeadingOnes() - 1; |
| Lower = C->shl(ShiftAmount); |
| Upper = *C + 1; |
| } else { |
| // 'shl nsw C, x' produces [C, C << CLZ(C)-1] |
| unsigned ShiftAmount = C->countLeadingZeros() - 1; |
| Lower = *C; |
| Upper = C->shl(ShiftAmount) + 1; |
| } |
| } |
| } |
| break; |
| |
| case Instruction::SDiv: |
| if (match(BO.getOperand(1), m_APInt(C))) { |
| APInt IntMin = APInt::getSignedMinValue(Width); |
| APInt IntMax = APInt::getSignedMaxValue(Width); |
| if (C->isAllOnesValue()) { |
| // 'sdiv x, -1' produces [INT_MIN + 1, INT_MAX] |
| // where C != -1 and C != 0 and C != 1 |
| Lower = IntMin + 1; |
| Upper = IntMax + 1; |
| } else if (C->countLeadingZeros() < Width - 1) { |
| // 'sdiv x, C' produces [INT_MIN / C, INT_MAX / C] |
| // where C != -1 and C != 0 and C != 1 |
| Lower = IntMin.sdiv(*C); |
| Upper = IntMax.sdiv(*C); |
| if (Lower.sgt(Upper)) |
| std::swap(Lower, Upper); |
| Upper = Upper + 1; |
| assert(Upper != Lower && "Upper part of range has wrapped!"); |
| } |
| } else if (match(BO.getOperand(0), m_APInt(C))) { |
| if (C->isMinSignedValue()) { |
| // 'sdiv INT_MIN, x' produces [INT_MIN, INT_MIN / -2]. |
| Lower = *C; |
| Upper = Lower.lshr(1) + 1; |
| } else { |
| // 'sdiv C, x' produces [-|C|, |C|]. |
| Upper = C->abs() + 1; |
| Lower = (-Upper) + 1; |
| } |
| } |
| break; |
| |
| case Instruction::UDiv: |
| if (match(BO.getOperand(1), m_APInt(C)) && !C->isNullValue()) { |
| // 'udiv x, C' produces [0, UINT_MAX / C]. |
| Upper = APInt::getMaxValue(Width).udiv(*C) + 1; |
| } else if (match(BO.getOperand(0), m_APInt(C))) { |
| // 'udiv C, x' produces [0, C]. |
| Upper = *C + 1; |
| } |
| break; |
| |
| case Instruction::SRem: |
| if (match(BO.getOperand(1), m_APInt(C))) { |
| // 'srem x, C' produces (-|C|, |C|). |
| Upper = C->abs(); |
| Lower = (-Upper) + 1; |
| } |
| break; |
| |
| case Instruction::URem: |
| if (match(BO.getOperand(1), m_APInt(C))) |
| // 'urem x, C' produces [0, C). |
| Upper = *C; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static Value *simplifyICmpWithConstant(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS) { |
| Type *ITy = GetCompareTy(RHS); // The return type. |
| |
| Value *X; |
| // Sign-bit checks can be optimized to true/false after unsigned |
| // floating-point casts: |
| // icmp slt (bitcast (uitofp X)), 0 --> false |
| // icmp sgt (bitcast (uitofp X)), -1 --> true |
| if (match(LHS, m_BitCast(m_UIToFP(m_Value(X))))) { |
| if (Pred == ICmpInst::ICMP_SLT && match(RHS, m_Zero())) |
| return ConstantInt::getFalse(ITy); |
| if (Pred == ICmpInst::ICMP_SGT && match(RHS, m_AllOnes())) |
| return ConstantInt::getTrue(ITy); |
| } |
| |
| const APInt *C; |
| if (!match(RHS, m_APInt(C))) |
| return nullptr; |
| |
| // Rule out tautological comparisons (eg., ult 0 or uge 0). |
| ConstantRange RHS_CR = ConstantRange::makeExactICmpRegion(Pred, *C); |
| if (RHS_CR.isEmptySet()) |
| return ConstantInt::getFalse(ITy); |
| if (RHS_CR.isFullSet()) |
| return ConstantInt::getTrue(ITy); |
| |
| // Find the range of possible values for binary operators. |
| unsigned Width = C->getBitWidth(); |
| APInt Lower = APInt(Width, 0); |
| APInt Upper = APInt(Width, 0); |
| if (auto *BO = dyn_cast<BinaryOperator>(LHS)) |
| setLimitsForBinOp(*BO, Lower, Upper); |
| |
| ConstantRange LHS_CR = |
| Lower != Upper ? ConstantRange(Lower, Upper) : ConstantRange(Width, true); |
| |
| if (auto *I = dyn_cast<Instruction>(LHS)) |
| if (auto *Ranges = I->getMetadata(LLVMContext::MD_range)) |
| LHS_CR = LHS_CR.intersectWith(getConstantRangeFromMetadata(*Ranges)); |
| |
| if (!LHS_CR.isFullSet()) { |
| if (RHS_CR.contains(LHS_CR)) |
| return ConstantInt::getTrue(ITy); |
| if (RHS_CR.inverse().contains(LHS_CR)) |
| return ConstantInt::getFalse(ITy); |
| } |
| |
| return nullptr; |
| } |
| |
| /// TODO: A large part of this logic is duplicated in InstCombine's |
| /// foldICmpBinOp(). We should be able to share that and avoid the code |
| /// duplication. |
| static Value *simplifyICmpWithBinOp(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| Type *ITy = GetCompareTy(LHS); // The return type. |
| |
| BinaryOperator *LBO = dyn_cast<BinaryOperator>(LHS); |
| BinaryOperator *RBO = dyn_cast<BinaryOperator>(RHS); |
| if (MaxRecurse && (LBO || RBO)) { |
| // Analyze the case when either LHS or RHS is an add instruction. |
| Value *A = nullptr, *B = nullptr, *C = nullptr, *D = nullptr; |
| // LHS = A + B (or A and B are null); RHS = C + D (or C and D are null). |
| bool NoLHSWrapProblem = false, NoRHSWrapProblem = false; |
| if (LBO && LBO->getOpcode() == Instruction::Add) { |
| A = LBO->getOperand(0); |
| B = LBO->getOperand(1); |
| NoLHSWrapProblem = |
| ICmpInst::isEquality(Pred) || |
| (CmpInst::isUnsigned(Pred) && LBO->hasNoUnsignedWrap()) || |
| (CmpInst::isSigned(Pred) && LBO->hasNoSignedWrap()); |
| } |
| if (RBO && RBO->getOpcode() == Instruction::Add) { |
| C = RBO->getOperand(0); |
| D = RBO->getOperand(1); |
| NoRHSWrapProblem = |
| ICmpInst::isEquality(Pred) || |
| (CmpInst::isUnsigned(Pred) && RBO->hasNoUnsignedWrap()) || |
| (CmpInst::isSigned(Pred) && RBO->hasNoSignedWrap()); |
| } |
| |
| // icmp (X+Y), X -> icmp Y, 0 for equalities or if there is no overflow. |
| if ((A == RHS || B == RHS) && NoLHSWrapProblem) |
| if (Value *V = SimplifyICmpInst(Pred, A == RHS ? B : A, |
| Constant::getNullValue(RHS->getType()), Q, |
| MaxRecurse - 1)) |
| return V; |
| |
| // icmp X, (X+Y) -> icmp 0, Y for equalities or if there is no overflow. |
| if ((C == LHS || D == LHS) && NoRHSWrapProblem) |
| if (Value *V = |
| SimplifyICmpInst(Pred, Constant::getNullValue(LHS->getType()), |
| C == LHS ? D : C, Q, MaxRecurse - 1)) |
| return V; |
| |
| // icmp (X+Y), (X+Z) -> icmp Y,Z for equalities or if there is no overflow. |
| if (A && C && (A == C || A == D || B == C || B == D) && NoLHSWrapProblem && |
| NoRHSWrapProblem) { |
| // Determine Y and Z in the form icmp (X+Y), (X+Z). |
| Value *Y, *Z; |
| if (A == C) { |
| // C + B == C + D -> B == D |
| Y = B; |
| Z = D; |
| } else if (A == D) { |
| // D + B == C + D -> B == C |
| Y = B; |
| Z = C; |
| } else if (B == C) { |
| // A + C == C + D -> A == D |
| Y = A; |
| Z = D; |
| } else { |
| assert(B == D); |
| // A + D == C + D -> A == C |
| Y = A; |
| Z = C; |
| } |
| if (Value *V = SimplifyICmpInst(Pred, Y, Z, Q, MaxRecurse - 1)) |
| return V; |
| } |
| } |
| |
| { |
| Value *Y = nullptr; |
| // icmp pred (or X, Y), X |
| if (LBO && match(LBO, m_c_Or(m_Value(Y), m_Specific(RHS)))) { |
| if (Pred == ICmpInst::ICMP_ULT) |
| return getFalse(ITy); |
| if (Pred == ICmpInst::ICMP_UGE) |
| return getTrue(ITy); |
| |
| if (Pred == ICmpInst::ICMP_SLT || Pred == ICmpInst::ICMP_SGE) { |
| KnownBits RHSKnown = computeKnownBits(RHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| KnownBits YKnown = computeKnownBits(Y, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (RHSKnown.isNonNegative() && YKnown.isNegative()) |
| return Pred == ICmpInst::ICMP_SLT ? getTrue(ITy) : getFalse(ITy); |
| if (RHSKnown.isNegative() || YKnown.isNonNegative()) |
| return Pred == ICmpInst::ICMP_SLT ? getFalse(ITy) : getTrue(ITy); |
| } |
| } |
| // icmp pred X, (or X, Y) |
| if (RBO && match(RBO, m_c_Or(m_Value(Y), m_Specific(LHS)))) { |
| if (Pred == ICmpInst::ICMP_ULE) |
| return getTrue(ITy); |
| if (Pred == ICmpInst::ICMP_UGT) |
| return getFalse(ITy); |
| |
| if (Pred == ICmpInst::ICMP_SGT || Pred == ICmpInst::ICMP_SLE) { |
| KnownBits LHSKnown = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| KnownBits YKnown = computeKnownBits(Y, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (LHSKnown.isNonNegative() && YKnown.isNegative()) |
| return Pred == ICmpInst::ICMP_SGT ? getTrue(ITy) : getFalse(ITy); |
| if (LHSKnown.isNegative() || YKnown.isNonNegative()) |
| return Pred == ICmpInst::ICMP_SGT ? getFalse(ITy) : getTrue(ITy); |
| } |
| } |
| } |
| |
| // icmp pred (and X, Y), X |
| if (LBO && match(LBO, m_c_And(m_Value(), m_Specific(RHS)))) { |
| if (Pred == ICmpInst::ICMP_UGT) |
| return getFalse(ITy); |
| if (Pred == ICmpInst::ICMP_ULE) |
| return getTrue(ITy); |
| } |
| // icmp pred X, (and X, Y) |
| if (RBO && match(RBO, m_c_And(m_Value(), m_Specific(LHS)))) { |
| if (Pred == ICmpInst::ICMP_UGE) |
| return getTrue(ITy); |
| if (Pred == ICmpInst::ICMP_ULT) |
| return getFalse(ITy); |
| } |
| |
| // 0 - (zext X) pred C |
| if (!CmpInst::isUnsigned(Pred) && match(LHS, m_Neg(m_ZExt(m_Value())))) { |
| if (ConstantInt *RHSC = dyn_cast<ConstantInt>(RHS)) { |
| if (RHSC->getValue().isStrictlyPositive()) { |
| if (Pred == ICmpInst::ICMP_SLT) |
| return ConstantInt::getTrue(RHSC->getContext()); |
| if (Pred == ICmpInst::ICMP_SGE) |
| return ConstantInt::getFalse(RHSC->getContext()); |
| if (Pred == ICmpInst::ICMP_EQ) |
| return ConstantInt::getFalse(RHSC->getContext()); |
| if (Pred == ICmpInst::ICMP_NE) |
| return ConstantInt::getTrue(RHSC->getContext()); |
| } |
| if (RHSC->getValue().isNonNegative()) { |
| if (Pred == ICmpInst::ICMP_SLE) |
| return ConstantInt::getTrue(RHSC->getContext()); |
| if (Pred == ICmpInst::ICMP_SGT) |
| return ConstantInt::getFalse(RHSC->getContext()); |
| } |
| } |
| } |
| |
| // icmp pred (urem X, Y), Y |
| if (LBO && match(LBO, m_URem(m_Value(), m_Specific(RHS)))) { |
| switch (Pred) { |
| default: |
| break; |
| case ICmpInst::ICMP_SGT: |
| case ICmpInst::ICMP_SGE: { |
| KnownBits Known = computeKnownBits(RHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (!Known.isNonNegative()) |
| break; |
| LLVM_FALLTHROUGH; |
| } |
| case ICmpInst::ICMP_EQ: |
| case ICmpInst::ICMP_UGT: |
| case ICmpInst::ICMP_UGE: |
| return getFalse(ITy); |
| case ICmpInst::ICMP_SLT: |
| case ICmpInst::ICMP_SLE: { |
| KnownBits Known = computeKnownBits(RHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (!Known.isNonNegative()) |
| break; |
| LLVM_FALLTHROUGH; |
| } |
| case ICmpInst::ICMP_NE: |
| case ICmpInst::ICMP_ULT: |
| case ICmpInst::ICMP_ULE: |
| return getTrue(ITy); |
| } |
| } |
| |
| // icmp pred X, (urem Y, X) |
| if (RBO && match(RBO, m_URem(m_Value(), m_Specific(LHS)))) { |
| switch (Pred) { |
| default: |
| break; |
| case ICmpInst::ICMP_SGT: |
| case ICmpInst::ICMP_SGE: { |
| KnownBits Known = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (!Known.isNonNegative()) |
| break; |
| LLVM_FALLTHROUGH; |
| } |
| case ICmpInst::ICMP_NE: |
| case ICmpInst::ICMP_UGT: |
| case ICmpInst::ICMP_UGE: |
| return getTrue(ITy); |
| case ICmpInst::ICMP_SLT: |
| case ICmpInst::ICMP_SLE: { |
| KnownBits Known = computeKnownBits(LHS, Q.DL, 0, Q.AC, Q.CxtI, Q.DT); |
| if (!Known.isNonNegative()) |
| break; |
| LLVM_FALLTHROUGH; |
| } |
| case ICmpInst::ICMP_EQ: |
| case ICmpInst::ICMP_ULT: |
| case ICmpInst::ICMP_ULE: |
| return getFalse(ITy); |
| } |
| } |
| |
| // x >> y <=u x |
| // x udiv y <=u x. |
| if (LBO && (match(LBO, m_LShr(m_Specific(RHS), m_Value())) || |
| match(LBO, m_UDiv(m_Specific(RHS), m_Value())))) { |
| // icmp pred (X op Y), X |
| if (Pred == ICmpInst::ICMP_UGT) |
| return getFalse(ITy); |
| if (Pred == ICmpInst::ICMP_ULE) |
| return getTrue(ITy); |
| } |
| |
| // x >=u x >> y |
| // x >=u x udiv y. |
| if (RBO && (match(RBO, m_LShr(m_Specific(LHS), m_Value())) || |
| match(RBO, m_UDiv(m_Specific(LHS), m_Value())))) { |
| // icmp pred X, (X op Y) |
| if (Pred == ICmpInst::ICMP_ULT) |
| return getFalse(ITy); |
| if (Pred == ICmpInst::ICMP_UGE) |
| return getTrue(ITy); |
| } |
| |
| // handle: |
| // CI2 << X == CI |
| // CI2 << X != CI |
| // |
| // where CI2 is a power of 2 and CI isn't |
| if (auto *CI = dyn_cast<ConstantInt>(RHS)) { |
| const APInt *CI2Val, *CIVal = &CI->getValue(); |
| if (LBO && match(LBO, m_Shl(m_APInt(CI2Val), m_Value())) && |
| CI2Val->isPowerOf2()) { |
| if (!CIVal->isPowerOf2()) { |
| // CI2 << X can equal zero in some circumstances, |
| // this simplification is unsafe if CI is zero. |
| // |
| // We know it is safe if: |
| // - The shift is nsw, we can't shift out the one bit. |
| // - The shift is nuw, we can't shift out the one bit. |
| // - CI2 is one |
| // - CI isn't zero |
| if (LBO->hasNoSignedWrap() || LBO->hasNoUnsignedWrap() || |
| CI2Val->isOneValue() || !CI->isZero()) { |
| if (Pred == ICmpInst::ICMP_EQ) |
| return ConstantInt::getFalse(RHS->getContext()); |
| if (Pred == ICmpInst::ICMP_NE) |
| return ConstantInt::getTrue(RHS->getContext()); |
| } |
| } |
| if (CIVal->isSignMask() && CI2Val->isOneValue()) { |
| if (Pred == ICmpInst::ICMP_UGT) |
| return ConstantInt::getFalse(RHS->getContext()); |
| if (Pred == ICmpInst::ICMP_ULE) |
| return ConstantInt::getTrue(RHS->getContext()); |
| } |
| } |
| } |
| |
| if (MaxRecurse && LBO && RBO && LBO->getOpcode() == RBO->getOpcode() && |
| LBO->getOperand(1) == RBO->getOperand(1)) { |
| switch (LBO->getOpcode()) { |
| default: |
| break; |
| case Instruction::UDiv: |
| case Instruction::LShr: |
| if (ICmpInst::isSigned(Pred) || !LBO->isExact() || !RBO->isExact()) |
| break; |
| if (Value *V = SimplifyICmpInst(Pred, LBO->getOperand(0), |
| RBO->getOperand(0), Q, MaxRecurse - 1)) |
| return V; |
| break; |
| case Instruction::SDiv: |
| if (!ICmpInst::isEquality(Pred) || !LBO->isExact() || !RBO->isExact()) |
| break; |
| if (Value *V = SimplifyICmpInst(Pred, LBO->getOperand(0), |
| RBO->getOperand(0), Q, MaxRecurse - 1)) |
| return V; |
| break; |
| case Instruction::AShr: |
| if (!LBO->isExact() || !RBO->isExact()) |
| break; |
| if (Value *V = SimplifyICmpInst(Pred, LBO->getOperand(0), |
| RBO->getOperand(0), Q, MaxRecurse - 1)) |
| return V; |
| break; |
| case Instruction::Shl: { |
| bool NUW = LBO->hasNoUnsignedWrap() && RBO->hasNoUnsignedWrap(); |
| bool NSW = LBO->hasNoSignedWrap() && RBO->hasNoSignedWrap(); |
| if (!NUW && !NSW) |
| break; |
| if (!NSW && ICmpInst::isSigned(Pred)) |
| break; |
| if (Value *V = SimplifyICmpInst(Pred, LBO->getOperand(0), |
| RBO->getOperand(0), Q, MaxRecurse - 1)) |
| return V; |
| break; |
| } |
| } |
| } |
| return nullptr; |
| } |
| |
| /// Simplify integer comparisons where at least one operand of the compare |
| /// matches an integer min/max idiom. |
| static Value *simplifyICmpWithMinMax(CmpInst::Predicate Pred, Value *LHS, |
| Value *RHS, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| Type *ITy = GetCompareTy(LHS); // The return type. |
| Value *A, *B; |
| CmpInst::Predicate P = CmpInst::BAD_ICMP_PREDICATE; |
| CmpInst::Predicate EqP; // Chosen so that "A == max/min(A,B)" iff "A EqP B". |
| |
| // Signed variants on "max(a,b)>=a -> true". |
| if (match(LHS, m_SMax(m_Value(A), m_Value(B))) && (A == RHS || B == RHS)) { |
| if (A != RHS) |
| std::swap(A, B); // smax(A, B) pred A. |
| EqP = CmpInst::ICMP_SGE; // "A == smax(A, B)" iff "A sge B". |
| // We analyze this as smax(A, B) pred A. |
| P = Pred; |
| } else if (match(RHS, m_SMax(m_Value(A), m_Value(B))) && |
| (A == LHS || B == LHS)) { |
| if (A != LHS) |
| std::swap(A, B); // A pred smax(A, B). |
| EqP = CmpInst::ICMP_SGE; // "A == smax(A, B)" iff "A sge B". |
| // We analyze this as smax(A, B) swapped-pred A. |
| P = CmpInst::getSwappedPredicate(Pred); |
| } else if (match(LHS, m_SMin(m_Value(A), m_Value(B))) && |
| (A == RHS || B == RHS)) { |
| if (A != RHS) |
| std::swap(A, B); // smin(A, B) pred A. |
| EqP = CmpInst::ICMP_SLE; // "A == smin(A, B)" iff "A sle B". |
| // We analyze this as smax(-A, -B) swapped-pred -A. |
| // Note that we do not need to actually form -A or -B thanks to EqP. |
| P = CmpInst::getSwappedPredicate(Pred); |
| } else if (match(RHS, m_SMin(m_Value(A), m_Value(B))) && |
| (A == LHS || B == LHS)) { |
| if (A != LHS) |
| std::swap(A, B); // A pred smin(A, B). |
| EqP = CmpInst::ICMP_SLE; // "A == smin(A, B)" iff "A sle B". |
| // We analyze this as smax(-A, -B) pred -A. |
| // Note that we do not need to actually form -A or -B thanks to EqP. |
| P = Pred; |
| } |
| if (P != CmpInst::BAD_ICMP_PREDICATE) { |
| // Cases correspond to "max(A, B) p A". |
| switch (P) { |
| default: |
| break; |
| case CmpInst::ICMP_EQ: |
| case CmpInst::ICMP_SLE: |
| // Equivalent to "A EqP B". This may be the same as the condition tested |
| // in the max/min; if so, we can just return that. |
| if (Value *V = ExtractEquivalentCondition(LHS, EqP, A, B)) |
| return V; |
| if (Value *V = ExtractEquivalentCondition(RHS, EqP, A, B)) |
| return V; |
| // Otherwise, see if "A EqP B" simplifies. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(EqP, A, B, Q, MaxRecurse - 1)) |
| return V; |
| break; |
| case CmpInst::ICMP_NE: |
| case CmpInst::ICMP_SGT: { |
| CmpInst::Predicate InvEqP = CmpInst::getInversePredicate(EqP); |
| // Equivalent to "A InvEqP B". This may be the same as the condition |
| // tested in the max/min; if so, we can just return that. |
| if (Value *V = ExtractEquivalentCondition(LHS, InvEqP, A, B)) |
| return V; |
| if (Value *V = ExtractEquivalentCondition(RHS, InvEqP, A, B)) |
| return V; |
| // Otherwise, see if "A InvEqP B" simplifies. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(InvEqP, A, B, Q, MaxRecurse - 1)) |
| return V; |
| break; |
| } |
| case CmpInst::ICMP_SGE: |
| // Always true. |
| return getTrue(ITy); |
| case CmpInst::ICMP_SLT: |
| // Always false. |
| return getFalse(ITy); |
| } |
| } |
| |
| // Unsigned variants on "max(a,b)>=a -> true". |
| P = CmpInst::BAD_ICMP_PREDICATE; |
| if (match(LHS, m_UMax(m_Value(A), m_Value(B))) && (A == RHS || B == RHS)) { |
| if (A != RHS) |
| std::swap(A, B); // umax(A, B) pred A. |
| EqP = CmpInst::ICMP_UGE; // "A == umax(A, B)" iff "A uge B". |
| // We analyze this as umax(A, B) pred A. |
| P = Pred; |
| } else if (match(RHS, m_UMax(m_Value(A), m_Value(B))) && |
| (A == LHS || B == LHS)) { |
| if (A != LHS) |
| std::swap(A, B); // A pred umax(A, B). |
| EqP = CmpInst::ICMP_UGE; // "A == umax(A, B)" iff "A uge B". |
| // We analyze this as umax(A, B) swapped-pred A. |
| P = CmpInst::getSwappedPredicate(Pred); |
| } else if (match(LHS, m_UMin(m_Value(A), m_Value(B))) && |
| (A == RHS || B == RHS)) { |
| if (A != RHS) |
| std::swap(A, B); // umin(A, B) pred A. |
| EqP = CmpInst::ICMP_ULE; // "A == umin(A, B)" iff "A ule B". |
| // We analyze this as umax(-A, -B) swapped-pred -A. |
| // Note that we do not need to actually form -A or -B thanks to EqP. |
| P = CmpInst::getSwappedPredicate(Pred); |
| } else if (match(RHS, m_UMin(m_Value(A), m_Value(B))) && |
| (A == LHS || B == LHS)) { |
| if (A != LHS) |
| std::swap(A, B); // A pred umin(A, B). |
| EqP = CmpInst::ICMP_ULE; // "A == umin(A, B)" iff "A ule B". |
| // We analyze this as umax(-A, -B) pred -A. |
| // Note that we do not need to actually form -A or -B thanks to EqP. |
| P = Pred; |
| } |
| if (P != CmpInst::BAD_ICMP_PREDICATE) { |
| // Cases correspond to "max(A, B) p A". |
| switch (P) { |
| default: |
| break; |
| case CmpInst::ICMP_EQ: |
| case CmpInst::ICMP_ULE: |
| // Equivalent to "A EqP B". This may be the same as the condition tested |
| // in the max/min; if so, we can just return that. |
| if (Value *V = ExtractEquivalentCondition(LHS, EqP, A, B)) |
| return V; |
| if (Value *V = ExtractEquivalentCondition(RHS, EqP, A, B)) |
| return V; |
| // Otherwise, see if "A EqP B" simplifies. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(EqP, A, B, Q, MaxRecurse - 1)) |
| return V; |
| break; |
| case CmpInst::ICMP_NE: |
| case CmpInst::ICMP_UGT: { |
| CmpInst::Predicate InvEqP = CmpInst::getInversePredicate(EqP); |
| // Equivalent to "A InvEqP B". This may be the same as the condition |
| // tested in the max/min; if so, we can just return that. |
| if (Value *V = ExtractEquivalentCondition(LHS, InvEqP, A, B)) |
| return V; |
| if (Value *V = ExtractEquivalentCondition(RHS, InvEqP, A, B)) |
| return V; |
| // Otherwise, see if "A InvEqP B" simplifies. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(InvEqP, A, B, Q, MaxRecurse - 1)) |
| return V; |
| break; |
| } |
| case CmpInst::ICMP_UGE: |
| // Always true. |
| return getTrue(ITy); |
| case CmpInst::ICMP_ULT: |
| // Always false. |
| return getFalse(ITy); |
| } |
| } |
| |
| // Variants on "max(x,y) >= min(x,z)". |
| Value *C, *D; |
| if (match(LHS, m_SMax(m_Value(A), m_Value(B))) && |
| match(RHS, m_SMin(m_Value(C), m_Value(D))) && |
| (A == C || A == D || B == C || B == D)) { |
| // max(x, ?) pred min(x, ?). |
| if (Pred == CmpInst::ICMP_SGE) |
| // Always true. |
| return getTrue(ITy); |
| if (Pred == CmpInst::ICMP_SLT) |
| // Always false. |
| return getFalse(ITy); |
| } else if (match(LHS, m_SMin(m_Value(A), m_Value(B))) && |
| match(RHS, m_SMax(m_Value(C), m_Value(D))) && |
| (A == C || A == D || B == C || B == D)) { |
| // min(x, ?) pred max(x, ?). |
| if (Pred == CmpInst::ICMP_SLE) |
| // Always true. |
| return getTrue(ITy); |
| if (Pred == CmpInst::ICMP_SGT) |
| // Always false. |
| return getFalse(ITy); |
| } else if (match(LHS, m_UMax(m_Value(A), m_Value(B))) && |
| match(RHS, m_UMin(m_Value(C), m_Value(D))) && |
| (A == C || A == D || B == C || B == D)) { |
| // max(x, ?) pred min(x, ?). |
| if (Pred == CmpInst::ICMP_UGE) |
| // Always true. |
| return getTrue(ITy); |
| if (Pred == CmpInst::ICMP_ULT) |
| // Always false. |
| return getFalse(ITy); |
| } else if (match(LHS, m_UMin(m_Value(A), m_Value(B))) && |
| match(RHS, m_UMax(m_Value(C), m_Value(D))) && |
| (A == C || A == D || B == C || B == D)) { |
| // min(x, ?) pred max(x, ?). |
| if (Pred == CmpInst::ICMP_ULE) |
| // Always true. |
| return getTrue(ITy); |
| if (Pred == CmpInst::ICMP_UGT) |
| // Always false. |
| return getFalse(ITy); |
| } |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an ICmpInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyICmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| CmpInst::Predicate Pred = (CmpInst::Predicate)Predicate; |
| assert(CmpInst::isIntPredicate(Pred) && "Not an integer compare!"); |
| |
| if (Constant *CLHS = dyn_cast<Constant>(LHS)) { |
| if (Constant *CRHS = dyn_cast<Constant>(RHS)) |
| return ConstantFoldCompareInstOperands(Pred, CLHS, CRHS, Q.DL, Q.TLI); |
| |
| // If we have a constant, make sure it is on the RHS. |
| std::swap(LHS, RHS); |
| Pred = CmpInst::getSwappedPredicate(Pred); |
| } |
| |
| Type *ITy = GetCompareTy(LHS); // The return type. |
| |
| // icmp X, X -> true/false |
| // icmp X, undef -> true/false because undef could be X. |
| if (LHS == RHS || isa<UndefValue>(RHS)) |
| return ConstantInt::get(ITy, CmpInst::isTrueWhenEqual(Pred)); |
| |
| if (Value *V = simplifyICmpOfBools(Pred, LHS, RHS, Q)) |
| return V; |
| |
| if (Value *V = simplifyICmpWithZero(Pred, LHS, RHS, Q)) |
| return V; |
| |
| if (Value *V = simplifyICmpWithConstant(Pred, LHS, RHS)) |
| return V; |
| |
| // If both operands have range metadata, use the metadata |
| // to simplify the comparison. |
| if (isa<Instruction>(RHS) && isa<Instruction>(LHS)) { |
| auto RHS_Instr = cast<Instruction>(RHS); |
| auto LHS_Instr = cast<Instruction>(LHS); |
| |
| if (RHS_Instr->getMetadata(LLVMContext::MD_range) && |
| LHS_Instr->getMetadata(LLVMContext::MD_range)) { |
| auto RHS_CR = getConstantRangeFromMetadata( |
| *RHS_Instr->getMetadata(LLVMContext::MD_range)); |
| auto LHS_CR = getConstantRangeFromMetadata( |
| *LHS_Instr->getMetadata(LLVMContext::MD_range)); |
| |
| auto Satisfied_CR = ConstantRange::makeSatisfyingICmpRegion(Pred, RHS_CR); |
| if (Satisfied_CR.contains(LHS_CR)) |
| return ConstantInt::getTrue(RHS->getContext()); |
| |
| auto InversedSatisfied_CR = ConstantRange::makeSatisfyingICmpRegion( |
| CmpInst::getInversePredicate(Pred), RHS_CR); |
| if (InversedSatisfied_CR.contains(LHS_CR)) |
| return ConstantInt::getFalse(RHS->getContext()); |
| } |
| } |
| |
| // Compare of cast, for example (zext X) != 0 -> X != 0 |
| if (isa<CastInst>(LHS) && (isa<Constant>(RHS) || isa<CastInst>(RHS))) { |
| Instruction *LI = cast<CastInst>(LHS); |
| Value *SrcOp = LI->getOperand(0); |
| Type *SrcTy = SrcOp->getType(); |
| Type *DstTy = LI->getType(); |
| |
| // Turn icmp (ptrtoint x), (ptrtoint/constant) into a compare of the input |
| // if the integer type is the same size as the pointer type. |
| if (MaxRecurse && isa<PtrToIntInst>(LI) && |
| Q.DL.getTypeSizeInBits(SrcTy) == DstTy->getPrimitiveSizeInBits()) { |
| if (Constant *RHSC = dyn_cast<Constant>(RHS)) { |
| // Transfer the cast to the constant. |
| if (Value *V = SimplifyICmpInst(Pred, SrcOp, |
| ConstantExpr::getIntToPtr(RHSC, SrcTy), |
| Q, MaxRecurse-1)) |
| return V; |
| } else if (PtrToIntInst *RI = dyn_cast<PtrToIntInst>(RHS)) { |
| if (RI->getOperand(0)->getType() == SrcTy) |
| // Compare without the cast. |
| if (Value *V = SimplifyICmpInst(Pred, SrcOp, RI->getOperand(0), |
| Q, MaxRecurse-1)) |
| return V; |
| } |
| } |
| |
| if (isa<ZExtInst>(LHS)) { |
| // Turn icmp (zext X), (zext Y) into a compare of X and Y if they have the |
| // same type. |
| if (ZExtInst *RI = dyn_cast<ZExtInst>(RHS)) { |
| if (MaxRecurse && SrcTy == RI->getOperand(0)->getType()) |
| // Compare X and Y. Note that signed predicates become unsigned. |
| if (Value *V = SimplifyICmpInst(ICmpInst::getUnsignedPredicate(Pred), |
| SrcOp, RI->getOperand(0), Q, |
| MaxRecurse-1)) |
| return V; |
| } |
| // Turn icmp (zext X), Cst into a compare of X and Cst if Cst is extended |
| // too. If not, then try to deduce the result of the comparison. |
| else if (ConstantInt *CI = dyn_cast<ConstantInt>(RHS)) { |
| // Compute the constant that would happen if we truncated to SrcTy then |
| // reextended to DstTy. |
| Constant *Trunc = ConstantExpr::getTrunc(CI, SrcTy); |
| Constant *RExt = ConstantExpr::getCast(CastInst::ZExt, Trunc, DstTy); |
| |
| // If the re-extended constant didn't change then this is effectively |
| // also a case of comparing two zero-extended values. |
| if (RExt == CI && MaxRecurse) |
| if (Value *V = SimplifyICmpInst(ICmpInst::getUnsignedPredicate(Pred), |
| SrcOp, Trunc, Q, MaxRecurse-1)) |
| return V; |
| |
| // Otherwise the upper bits of LHS are zero while RHS has a non-zero bit |
| // there. Use this to work out the result of the comparison. |
| if (RExt != CI) { |
| switch (Pred) { |
| default: llvm_unreachable("Unknown ICmp predicate!"); |
| // LHS <u RHS. |
| case ICmpInst::ICMP_EQ: |
| case ICmpInst::ICMP_UGT: |
| case ICmpInst::ICMP_UGE: |
| return ConstantInt::getFalse(CI->getContext()); |
| |
| case ICmpInst::ICMP_NE: |
| case ICmpInst::ICMP_ULT: |
| case ICmpInst::ICMP_ULE: |
| return ConstantInt::getTrue(CI->getContext()); |
| |
| // LHS is non-negative. If RHS is negative then LHS >s LHS. If RHS |
| // is non-negative then LHS <s RHS. |
| case ICmpInst::ICMP_SGT: |
| case ICmpInst::ICMP_SGE: |
| return CI->getValue().isNegative() ? |
| ConstantInt::getTrue(CI->getContext()) : |
| ConstantInt::getFalse(CI->getContext()); |
| |
| case ICmpInst::ICMP_SLT: |
| case ICmpInst::ICMP_SLE: |
| return CI->getValue().isNegative() ? |
| ConstantInt::getFalse(CI->getContext()) : |
| ConstantInt::getTrue(CI->getContext()); |
| } |
| } |
| } |
| } |
| |
| if (isa<SExtInst>(LHS)) { |
| // Turn icmp (sext X), (sext Y) into a compare of X and Y if they have the |
| // same type. |
| if (SExtInst *RI = dyn_cast<SExtInst>(RHS)) { |
| if (MaxRecurse && SrcTy == RI->getOperand(0)->getType()) |
| // Compare X and Y. Note that the predicate does not change. |
| if (Value *V = SimplifyICmpInst(Pred, SrcOp, RI->getOperand(0), |
| Q, MaxRecurse-1)) |
| return V; |
| } |
| // Turn icmp (sext X), Cst into a compare of X and Cst if Cst is extended |
| // too. If not, then try to deduce the result of the comparison. |
| else if (ConstantInt *CI = dyn_cast<ConstantInt>(RHS)) { |
| // Compute the constant that would happen if we truncated to SrcTy then |
| // reextended to DstTy. |
| Constant *Trunc = ConstantExpr::getTrunc(CI, SrcTy); |
| Constant *RExt = ConstantExpr::getCast(CastInst::SExt, Trunc, DstTy); |
| |
| // If the re-extended constant didn't change then this is effectively |
| // also a case of comparing two sign-extended values. |
| if (RExt == CI && MaxRecurse) |
| if (Value *V = SimplifyICmpInst(Pred, SrcOp, Trunc, Q, MaxRecurse-1)) |
| return V; |
| |
| // Otherwise the upper bits of LHS are all equal, while RHS has varying |
| // bits there. Use this to work out the result of the comparison. |
| if (RExt != CI) { |
| switch (Pred) { |
| default: llvm_unreachable("Unknown ICmp predicate!"); |
| case ICmpInst::ICMP_EQ: |
| return ConstantInt::getFalse(CI->getContext()); |
| case ICmpInst::ICMP_NE: |
| return ConstantInt::getTrue(CI->getContext()); |
| |
| // If RHS is non-negative then LHS <s RHS. If RHS is negative then |
| // LHS >s RHS. |
| case ICmpInst::ICMP_SGT: |
| case ICmpInst::ICMP_SGE: |
| return CI->getValue().isNegative() ? |
| ConstantInt::getTrue(CI->getContext()) : |
| ConstantInt::getFalse(CI->getContext()); |
| case ICmpInst::ICMP_SLT: |
| case ICmpInst::ICMP_SLE: |
| return CI->getValue().isNegative() ? |
| ConstantInt::getFalse(CI->getContext()) : |
| ConstantInt::getTrue(CI->getContext()); |
| |
| // If LHS is non-negative then LHS <u RHS. If LHS is negative then |
| // LHS >u RHS. |
| case ICmpInst::ICMP_UGT: |
| case ICmpInst::ICMP_UGE: |
| // Comparison is true iff the LHS <s 0. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(ICmpInst::ICMP_SLT, SrcOp, |
| Constant::getNullValue(SrcTy), |
| Q, MaxRecurse-1)) |
| return V; |
| break; |
| case ICmpInst::ICMP_ULT: |
| case ICmpInst::ICMP_ULE: |
| // Comparison is true iff the LHS >=s 0. |
| if (MaxRecurse) |
| if (Value *V = SimplifyICmpInst(ICmpInst::ICMP_SGE, SrcOp, |
| Constant::getNullValue(SrcTy), |
| Q, MaxRecurse-1)) |
| return V; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| // icmp eq|ne X, Y -> false|true if X != Y |
| if (ICmpInst::isEquality(Pred) && |
| isKnownNonEqual(LHS, RHS, Q.DL, Q.AC, Q.CxtI, Q.DT)) { |
| return Pred == ICmpInst::ICMP_NE ? getTrue(ITy) : getFalse(ITy); |
| } |
| |
| if (Value *V = simplifyICmpWithBinOp(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| if (Value *V = simplifyICmpWithMinMax(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| // Simplify comparisons of related pointers using a powerful, recursive |
| // GEP-walk when we have target data available.. |
| if (LHS->getType()->isPointerTy()) |
| if (auto *C = computePointerICmp(Q.DL, Q.TLI, Q.DT, Pred, Q.AC, Q.CxtI, LHS, |
| RHS)) |
| return C; |
| if (auto *CLHS = dyn_cast<PtrToIntOperator>(LHS)) |
| if (auto *CRHS = dyn_cast<PtrToIntOperator>(RHS)) |
| if (Q.DL.getTypeSizeInBits(CLHS->getPointerOperandType()) == |
| Q.DL.getTypeSizeInBits(CLHS->getType()) && |
| Q.DL.getTypeSizeInBits(CRHS->getPointerOperandType()) == |
| Q.DL.getTypeSizeInBits(CRHS->getType())) |
| if (auto *C = computePointerICmp(Q.DL, Q.TLI, Q.DT, Pred, Q.AC, Q.CxtI, |
| CLHS->getPointerOperand(), |
| CRHS->getPointerOperand())) |
| return C; |
| |
| if (GetElementPtrInst *GLHS = dyn_cast<GetElementPtrInst>(LHS)) { |
| if (GEPOperator *GRHS = dyn_cast<GEPOperator>(RHS)) { |
| if (GLHS->getPointerOperand() == GRHS->getPointerOperand() && |
| GLHS->hasAllConstantIndices() && GRHS->hasAllConstantIndices() && |
| (ICmpInst::isEquality(Pred) || |
| (GLHS->isInBounds() && GRHS->isInBounds() && |
| Pred == ICmpInst::getSignedPredicate(Pred)))) { |
| // The bases are equal and the indices are constant. Build a constant |
| // expression GEP with the same indices and a null base pointer to see |
| // what constant folding can make out of it. |
| Constant *Null = Constant::getNullValue(GLHS->getPointerOperandType()); |
| SmallVector<Value *, 4> IndicesLHS(GLHS->idx_begin(), GLHS->idx_end()); |
| Constant *NewLHS = ConstantExpr::getGetElementPtr( |
| GLHS->getSourceElementType(), Null, IndicesLHS); |
| |
| SmallVector<Value *, 4> IndicesRHS(GRHS->idx_begin(), GRHS->idx_end()); |
| Constant *NewRHS = ConstantExpr::getGetElementPtr( |
| GLHS->getSourceElementType(), Null, IndicesRHS); |
| return ConstantExpr::getICmp(Pred, NewLHS, NewRHS); |
| } |
| } |
| } |
| |
| // If the comparison is with the result of a select instruction, check whether |
| // comparing with either branch of the select always yields the same value. |
| if (isa<SelectInst>(LHS) || isa<SelectInst>(RHS)) |
| if (Value *V = ThreadCmpOverSelect(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| // If the comparison is with the result of a phi instruction, check whether |
| // doing the compare with each incoming phi value yields a common result. |
| if (isa<PHINode>(LHS) || isa<PHINode>(RHS)) |
| if (Value *V = ThreadCmpOverPHI(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyICmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q) { |
| return ::SimplifyICmpInst(Predicate, LHS, RHS, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an FCmpInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyFCmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| FastMathFlags FMF, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| CmpInst::Predicate Pred = (CmpInst::Predicate)Predicate; |
| assert(CmpInst::isFPPredicate(Pred) && "Not an FP compare!"); |
| |
| if (Constant *CLHS = dyn_cast<Constant>(LHS)) { |
| if (Constant *CRHS = dyn_cast<Constant>(RHS)) |
| return ConstantFoldCompareInstOperands(Pred, CLHS, CRHS, Q.DL, Q.TLI); |
| |
| // If we have a constant, make sure it is on the RHS. |
| std::swap(LHS, RHS); |
| Pred = CmpInst::getSwappedPredicate(Pred); |
| } |
| |
| // Fold trivial predicates. |
| Type *RetTy = GetCompareTy(LHS); |
| if (Pred == FCmpInst::FCMP_FALSE) |
| return getFalse(RetTy); |
| if (Pred == FCmpInst::FCMP_TRUE) |
| return getTrue(RetTy); |
| |
| // UNO/ORD predicates can be trivially folded if NaNs are ignored. |
| if (FMF.noNaNs()) { |
| if (Pred == FCmpInst::FCMP_UNO) |
| return getFalse(RetTy); |
| if (Pred == FCmpInst::FCMP_ORD) |
| return getTrue(RetTy); |
| } |
| |
| // NaN is unordered; NaN is not ordered. |
| assert((FCmpInst::isOrdered(Pred) || FCmpInst::isUnordered(Pred)) && |
| "Comparison must be either ordered or unordered"); |
| if (match(RHS, m_NaN())) |
| return ConstantInt::get(RetTy, CmpInst::isUnordered(Pred)); |
| |
| // fcmp pred x, undef and fcmp pred undef, x |
| // fold to true if unordered, false if ordered |
| if (isa<UndefValue>(LHS) || isa<UndefValue>(RHS)) { |
| // Choosing NaN for the undef will always make unordered comparison succeed |
| // and ordered comparison fail. |
| return ConstantInt::get(RetTy, CmpInst::isUnordered(Pred)); |
| } |
| |
| // fcmp x,x -> true/false. Not all compares are foldable. |
| if (LHS == RHS) { |
| if (CmpInst::isTrueWhenEqual(Pred)) |
| return getTrue(RetTy); |
| if (CmpInst::isFalseWhenEqual(Pred)) |
| return getFalse(RetTy); |
| } |
| |
| // Handle fcmp with constant RHS. |
| const APFloat *C; |
| if (match(RHS, m_APFloat(C))) { |
| // Check whether the constant is an infinity. |
| if (C->isInfinity()) { |
| if (C->isNegative()) { |
| switch (Pred) { |
| case FCmpInst::FCMP_OLT: |
| // No value is ordered and less than negative infinity. |
| return getFalse(RetTy); |
| case FCmpInst::FCMP_UGE: |
| // All values are unordered with or at least negative infinity. |
| return getTrue(RetTy); |
| default: |
| break; |
| } |
| } else { |
| switch (Pred) { |
| case FCmpInst::FCMP_OGT: |
| // No value is ordered and greater than infinity. |
| return getFalse(RetTy); |
| case FCmpInst::FCMP_ULE: |
| // All values are unordered with and at most infinity. |
| return getTrue(RetTy); |
| default: |
| break; |
| } |
| } |
| } |
| if (C->isZero()) { |
| switch (Pred) { |
| case FCmpInst::FCMP_UGE: |
| if (CannotBeOrderedLessThanZero(LHS, Q.TLI)) |
| return getTrue(RetTy); |
| break; |
| case FCmpInst::FCMP_OLT: |
| // X < 0 |
| if (CannotBeOrderedLessThanZero(LHS, Q.TLI)) |
| return getFalse(RetTy); |
| break; |
| default: |
| break; |
| } |
| } else if (C->isNegative()) { |
| assert(!C->isNaN() && "Unexpected NaN constant!"); |
| // TODO: We can catch more cases by using a range check rather than |
| // relying on CannotBeOrderedLessThanZero. |
| switch (Pred) { |
| case FCmpInst::FCMP_UGE: |
| case FCmpInst::FCMP_UGT: |
| case FCmpInst::FCMP_UNE: |
| // (X >= 0) implies (X > C) when (C < 0) |
| if (CannotBeOrderedLessThanZero(LHS, Q.TLI)) |
| return getTrue(RetTy); |
| break; |
| case FCmpInst::FCMP_OEQ: |
| case FCmpInst::FCMP_OLE: |
| case FCmpInst::FCMP_OLT: |
| // (X >= 0) implies !(X < C) when (C < 0) |
| if (CannotBeOrderedLessThanZero(LHS, Q.TLI)) |
| return getFalse(RetTy); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| // If the comparison is with the result of a select instruction, check whether |
| // comparing with either branch of the select always yields the same value. |
| if (isa<SelectInst>(LHS) || isa<SelectInst>(RHS)) |
| if (Value *V = ThreadCmpOverSelect(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| // If the comparison is with the result of a phi instruction, check whether |
| // doing the compare with each incoming phi value yields a common result. |
| if (isa<PHINode>(LHS) || isa<PHINode>(RHS)) |
| if (Value *V = ThreadCmpOverPHI(Pred, LHS, RHS, Q, MaxRecurse)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyFCmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| FastMathFlags FMF, const SimplifyQuery &Q) { |
| return ::SimplifyFCmpInst(Predicate, LHS, RHS, FMF, Q, RecursionLimit); |
| } |
| |
| /// See if V simplifies when its operand Op is replaced with RepOp. |
| static const Value *SimplifyWithOpReplaced(Value *V, Value *Op, Value *RepOp, |
| const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| // Trivial replacement. |
| if (V == Op) |
| return RepOp; |
| |
| // We cannot replace a constant, and shouldn't even try. |
| if (isa<Constant>(Op)) |
| return nullptr; |
| |
| auto *I = dyn_cast<Instruction>(V); |
| if (!I) |
| return nullptr; |
| |
| // If this is a binary operator, try to simplify it with the replaced op. |
| if (auto *B = dyn_cast<BinaryOperator>(I)) { |
| // Consider: |
| // %cmp = icmp eq i32 %x, 2147483647 |
| // %add = add nsw i32 %x, 1 |
| // %sel = select i1 %cmp, i32 -2147483648, i32 %add |
| // |
| // We can't replace %sel with %add unless we strip away the flags. |
| if (isa<OverflowingBinaryOperator>(B)) |
| if (B->hasNoSignedWrap() || B->hasNoUnsignedWrap()) |
| return nullptr; |
| if (isa<PossiblyExactOperator>(B)) |
| if (B->isExact()) |
| return nullptr; |
| |
| if (MaxRecurse) { |
| if (B->getOperand(0) == Op) |
| return SimplifyBinOp(B->getOpcode(), RepOp, B->getOperand(1), Q, |
| MaxRecurse - 1); |
| if (B->getOperand(1) == Op) |
| return SimplifyBinOp(B->getOpcode(), B->getOperand(0), RepOp, Q, |
| MaxRecurse - 1); |
| } |
| } |
| |
| // Same for CmpInsts. |
| if (CmpInst *C = dyn_cast<CmpInst>(I)) { |
| if (MaxRecurse) { |
| if (C->getOperand(0) == Op) |
| return SimplifyCmpInst(C->getPredicate(), RepOp, C->getOperand(1), Q, |
| MaxRecurse - 1); |
| if (C->getOperand(1) == Op) |
| return SimplifyCmpInst(C->getPredicate(), C->getOperand(0), RepOp, Q, |
| MaxRecurse - 1); |
| } |
| } |
| |
| // Same for GEPs. |
| if (auto *GEP = dyn_cast<GetElementPtrInst>(I)) { |
| if (MaxRecurse) { |
| SmallVector<Value *, 8> NewOps(GEP->getNumOperands()); |
| transform(GEP->operands(), NewOps.begin(), |
| [&](Value *V) { return V == Op ? RepOp : V; }); |
| return SimplifyGEPInst(GEP->getSourceElementType(), NewOps, Q, |
| MaxRecurse - 1); |
| } |
| } |
| |
| // TODO: We could hand off more cases to instsimplify here. |
| |
| // If all operands are constant after substituting Op for RepOp then we can |
| // constant fold the instruction. |
| if (Constant *CRepOp = dyn_cast<Constant>(RepOp)) { |
| // Build a list of all constant operands. |
| SmallVector<Constant *, 8> ConstOps; |
| for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) { |
| if (I->getOperand(i) == Op) |
| ConstOps.push_back(CRepOp); |
| else if (Constant *COp = dyn_cast<Constant>(I->getOperand(i))) |
| ConstOps.push_back(COp); |
| else |
| break; |
| } |
| |
| // All operands were constants, fold it. |
| if (ConstOps.size() == I->getNumOperands()) { |
| if (CmpInst *C = dyn_cast<CmpInst>(I)) |
| return ConstantFoldCompareInstOperands(C->getPredicate(), ConstOps[0], |
| ConstOps[1], Q.DL, Q.TLI); |
| |
| if (LoadInst *LI = dyn_cast<LoadInst>(I)) |
| if (!LI->isVolatile()) |
| return ConstantFoldLoadFromConstPtr(ConstOps[0], LI->getType(), Q.DL); |
| |
| return ConstantFoldInstOperands(I, ConstOps, Q.DL, Q.TLI); |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| /// Try to simplify a select instruction when its condition operand is an |
| /// integer comparison where one operand of the compare is a constant. |
| static Value *simplifySelectBitTest(Value *TrueVal, Value *FalseVal, Value *X, |
| const APInt *Y, bool TrueWhenUnset) { |
| const APInt *C; |
| |
| // (X & Y) == 0 ? X & ~Y : X --> X |
| // (X & Y) != 0 ? X & ~Y : X --> X & ~Y |
| if (FalseVal == X && match(TrueVal, m_And(m_Specific(X), m_APInt(C))) && |
| *Y == ~*C) |
| return TrueWhenUnset ? FalseVal : TrueVal; |
| |
| // (X & Y) == 0 ? X : X & ~Y --> X & ~Y |
| // (X & Y) != 0 ? X : X & ~Y --> X |
| if (TrueVal == X && match(FalseVal, m_And(m_Specific(X), m_APInt(C))) && |
| *Y == ~*C) |
| return TrueWhenUnset ? FalseVal : TrueVal; |
| |
| if (Y->isPowerOf2()) { |
| // (X & Y) == 0 ? X | Y : X --> X | Y |
| // (X & Y) != 0 ? X | Y : X --> X |
| if (FalseVal == X && match(TrueVal, m_Or(m_Specific(X), m_APInt(C))) && |
| *Y == *C) |
| return TrueWhenUnset ? TrueVal : FalseVal; |
| |
| // (X & Y) == 0 ? X : X | Y --> X |
| // (X & Y) != 0 ? X : X | Y --> X | Y |
| if (TrueVal == X && match(FalseVal, m_Or(m_Specific(X), m_APInt(C))) && |
| *Y == *C) |
| return TrueWhenUnset ? TrueVal : FalseVal; |
| } |
| |
| return nullptr; |
| } |
| |
| /// An alternative way to test if a bit is set or not uses sgt/slt instead of |
| /// eq/ne. |
| static Value *simplifySelectWithFakeICmpEq(Value *CmpLHS, Value *CmpRHS, |
| ICmpInst::Predicate Pred, |
| Value *TrueVal, Value *FalseVal) { |
| Value *X; |
| APInt Mask; |
| if (!decomposeBitTestICmp(CmpLHS, CmpRHS, Pred, X, Mask)) |
| return nullptr; |
| |
| return simplifySelectBitTest(TrueVal, FalseVal, X, &Mask, |
| Pred == ICmpInst::ICMP_EQ); |
| } |
| |
| /// Try to simplify a select instruction when its condition operand is an |
| /// integer comparison. |
| static Value *simplifySelectWithICmpCond(Value *CondVal, Value *TrueVal, |
| Value *FalseVal, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| ICmpInst::Predicate Pred; |
| Value *CmpLHS, *CmpRHS; |
| if (!match(CondVal, m_ICmp(Pred, m_Value(CmpLHS), m_Value(CmpRHS)))) |
| return nullptr; |
| |
| if (ICmpInst::isEquality(Pred) && match(CmpRHS, m_Zero())) { |
| Value *X; |
| const APInt *Y; |
| if (match(CmpLHS, m_And(m_Value(X), m_APInt(Y)))) |
| if (Value *V = simplifySelectBitTest(TrueVal, FalseVal, X, Y, |
| Pred == ICmpInst::ICMP_EQ)) |
| return V; |
| } |
| |
| // Check for other compares that behave like bit test. |
| if (Value *V = simplifySelectWithFakeICmpEq(CmpLHS, CmpRHS, Pred, |
| TrueVal, FalseVal)) |
| return V; |
| |
| // If we have an equality comparison, then we know the value in one of the |
| // arms of the select. See if substituting this value into the arm and |
| // simplifying the result yields the same value as the other arm. |
| if (Pred == ICmpInst::ICMP_EQ) { |
| if (SimplifyWithOpReplaced(FalseVal, CmpLHS, CmpRHS, Q, MaxRecurse) == |
| TrueVal || |
| SimplifyWithOpReplaced(FalseVal, CmpRHS, CmpLHS, Q, MaxRecurse) == |
| TrueVal) |
| return FalseVal; |
| if (SimplifyWithOpReplaced(TrueVal, CmpLHS, CmpRHS, Q, MaxRecurse) == |
| FalseVal || |
| SimplifyWithOpReplaced(TrueVal, CmpRHS, CmpLHS, Q, MaxRecurse) == |
| FalseVal) |
| return FalseVal; |
| } else if (Pred == ICmpInst::ICMP_NE) { |
| if (SimplifyWithOpReplaced(TrueVal, CmpLHS, CmpRHS, Q, MaxRecurse) == |
| FalseVal || |
| SimplifyWithOpReplaced(TrueVal, CmpRHS, CmpLHS, Q, MaxRecurse) == |
| FalseVal) |
| return TrueVal; |
| if (SimplifyWithOpReplaced(FalseVal, CmpLHS, CmpRHS, Q, MaxRecurse) == |
| TrueVal || |
| SimplifyWithOpReplaced(FalseVal, CmpRHS, CmpLHS, Q, MaxRecurse) == |
| TrueVal) |
| return TrueVal; |
| } |
| |
| return nullptr; |
| } |
| |
| /// Given operands for a SelectInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifySelectInst(Value *Cond, Value *TrueVal, Value *FalseVal, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (auto *CondC = dyn_cast<Constant>(Cond)) { |
| if (auto *TrueC = dyn_cast<Constant>(TrueVal)) |
| if (auto *FalseC = dyn_cast<Constant>(FalseVal)) |
| return ConstantFoldSelectInstruction(CondC, TrueC, FalseC); |
| |
| // select undef, X, Y -> X or Y |
| if (isa<UndefValue>(CondC)) |
| return isa<Constant>(FalseVal) ? FalseVal : TrueVal; |
| |
| // TODO: Vector constants with undef elements don't simplify. |
| |
| // select true, X, Y -> X |
| if (CondC->isAllOnesValue()) |
| return TrueVal; |
| // select false, X, Y -> Y |
| if (CondC->isNullValue()) |
| return FalseVal; |
| } |
| |
| // select ?, X, X -> X |
| if (TrueVal == FalseVal) |
| return TrueVal; |
| |
| if (isa<UndefValue>(TrueVal)) // select ?, undef, X -> X |
| return FalseVal; |
| if (isa<UndefValue>(FalseVal)) // select ?, X, undef -> X |
| return TrueVal; |
| |
| if (Value *V = |
| simplifySelectWithICmpCond(Cond, TrueVal, FalseVal, Q, MaxRecurse)) |
| return V; |
| |
| if (Value *V = foldSelectWithBinaryOp(Cond, TrueVal, FalseVal)) |
| return V; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifySelectInst(Value *Cond, Value *TrueVal, Value *FalseVal, |
| const SimplifyQuery &Q) { |
| return ::SimplifySelectInst(Cond, TrueVal, FalseVal, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an GetElementPtrInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyGEPInst(Type *SrcTy, ArrayRef<Value *> Ops, |
| const SimplifyQuery &Q, unsigned) { |
| // The type of the GEP pointer operand. |
| unsigned AS = |
| cast<PointerType>(Ops[0]->getType()->getScalarType())->getAddressSpace(); |
| |
| // getelementptr P -> P. |
| if (Ops.size() == 1) |
| return Ops[0]; |
| |
| // Compute the (pointer) type returned by the GEP instruction. |
| Type *LastType = GetElementPtrInst::getIndexedType(SrcTy, Ops.slice(1)); |
| Type *GEPTy = PointerType::get(LastType, AS); |
| if (VectorType *VT = dyn_cast<VectorType>(Ops[0]->getType())) |
| GEPTy = VectorType::get(GEPTy, VT->getNumElements()); |
| else if (VectorType *VT = dyn_cast<VectorType>(Ops[1]->getType())) |
| GEPTy = VectorType::get(GEPTy, VT->getNumElements()); |
| |
| if (isa<UndefValue>(Ops[0])) |
| return UndefValue::get(GEPTy); |
| |
| if (Ops.size() == 2) { |
| // getelementptr P, 0 -> P. |
| if (match(Ops[1], m_Zero()) && Ops[0]->getType() == GEPTy) |
| return Ops[0]; |
| |
| Type *Ty = SrcTy; |
| if (Ty->isSized()) { |
| Value *P; |
| uint64_t C; |
| uint64_t TyAllocSize = Q.DL.getTypeAllocSize(Ty); |
| // getelementptr P, N -> P if P points to a type of zero size. |
| if (TyAllocSize == 0 && Ops[0]->getType() == GEPTy) |
| return Ops[0]; |
| |
| // The following transforms are only safe if the ptrtoint cast |
| // doesn't truncate the pointers. |
| if (Ops[1]->getType()->getScalarSizeInBits() == |
| Q.DL.getIndexSizeInBits(AS)) { |
| auto PtrToIntOrZero = [GEPTy](Value *P) -> Value * { |
| if (match(P, m_Zero())) |
| return Constant::getNullValue(GEPTy); |
| Value *Temp; |
| if (match(P, m_PtrToInt(m_Value(Temp)))) |
| if (Temp->getType() == GEPTy) |
| return Temp; |
| return nullptr; |
| }; |
| |
| // getelementptr V, (sub P, V) -> P if P points to a type of size 1. |
| if (TyAllocSize == 1 && |
| match(Ops[1], m_Sub(m_Value(P), m_PtrToInt(m_Specific(Ops[0]))))) |
| if (Value *R = PtrToIntOrZero(P)) |
| return R; |
| |
| // getelementptr V, (ashr (sub P, V), C) -> Q |
| // if P points to a type of size 1 << C. |
| if (match(Ops[1], |
| m_AShr(m_Sub(m_Value(P), m_PtrToInt(m_Specific(Ops[0]))), |
| m_ConstantInt(C))) && |
| TyAllocSize == 1ULL << C) |
| if (Value *R = PtrToIntOrZero(P)) |
| return R; |
| |
| // getelementptr V, (sdiv (sub P, V), C) -> Q |
| // if P points to a type of size C. |
| if (match(Ops[1], |
| m_SDiv(m_Sub(m_Value(P), m_PtrToInt(m_Specific(Ops[0]))), |
| m_SpecificInt(TyAllocSize)))) |
| if (Value *R = PtrToIntOrZero(P)) |
| return R; |
| } |
| } |
| } |
| |
| if (Q.DL.getTypeAllocSize(LastType) == 1 && |
| all_of(Ops.slice(1).drop_back(1), |
| [](Value *Idx) { return match(Idx, m_Zero()); })) { |
| unsigned IdxWidth = |
| Q.DL.getIndexSizeInBits(Ops[0]->getType()->getPointerAddressSpace()); |
| if (Q.DL.getTypeSizeInBits(Ops.back()->getType()) == IdxWidth) { |
| APInt BasePtrOffset(IdxWidth, 0); |
| Value *StrippedBasePtr = |
| Ops[0]->stripAndAccumulateInBoundsConstantOffsets(Q.DL, |
| BasePtrOffset); |
| |
| // gep (gep V, C), (sub 0, V) -> C |
| if (match(Ops.back(), |
| m_Sub(m_Zero(), m_PtrToInt(m_Specific(StrippedBasePtr))))) { |
| auto *CI = ConstantInt::get(GEPTy->getContext(), BasePtrOffset); |
| return ConstantExpr::getIntToPtr(CI, GEPTy); |
| } |
| // gep (gep V, C), (xor V, -1) -> C-1 |
| if (match(Ops.back(), |
| m_Xor(m_PtrToInt(m_Specific(StrippedBasePtr)), m_AllOnes()))) { |
| auto *CI = ConstantInt::get(GEPTy->getContext(), BasePtrOffset - 1); |
| return ConstantExpr::getIntToPtr(CI, GEPTy); |
| } |
| } |
| } |
| |
| // Check to see if this is constant foldable. |
| if (!all_of(Ops, [](Value *V) { return isa<Constant>(V); })) |
| return nullptr; |
| |
| auto *CE = ConstantExpr::getGetElementPtr(SrcTy, cast<Constant>(Ops[0]), |
| Ops.slice(1)); |
| if (auto *CEFolded = ConstantFoldConstant(CE, Q.DL)) |
| return CEFolded; |
| return CE; |
| } |
| |
| Value *llvm::SimplifyGEPInst(Type *SrcTy, ArrayRef<Value *> Ops, |
| const SimplifyQuery &Q) { |
| return ::SimplifyGEPInst(SrcTy, Ops, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an InsertValueInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyInsertValueInst(Value *Agg, Value *Val, |
| ArrayRef<unsigned> Idxs, const SimplifyQuery &Q, |
| unsigned) { |
| if (Constant *CAgg = dyn_cast<Constant>(Agg)) |
| if (Constant *CVal = dyn_cast<Constant>(Val)) |
| return ConstantFoldInsertValueInstruction(CAgg, CVal, Idxs); |
| |
| // insertvalue x, undef, n -> x |
| if (match(Val, m_Undef())) |
| return Agg; |
| |
| // insertvalue x, (extractvalue y, n), n |
| if (ExtractValueInst *EV = dyn_cast<ExtractValueInst>(Val)) |
| if (EV->getAggregateOperand()->getType() == Agg->getType() && |
| EV->getIndices() == Idxs) { |
| // insertvalue undef, (extractvalue y, n), n -> y |
| if (match(Agg, m_Undef())) |
| return EV->getAggregateOperand(); |
| |
| // insertvalue y, (extractvalue y, n), n -> y |
| if (Agg == EV->getAggregateOperand()) |
| return Agg; |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyInsertValueInst(Value *Agg, Value *Val, |
| ArrayRef<unsigned> Idxs, |
| const SimplifyQuery &Q) { |
| return ::SimplifyInsertValueInst(Agg, Val, Idxs, Q, RecursionLimit); |
| } |
| |
| Value *llvm::SimplifyInsertElementInst(Value *Vec, Value *Val, Value *Idx, |
| const SimplifyQuery &Q) { |
| // Try to constant fold. |
| auto *VecC = dyn_cast<Constant>(Vec); |
| auto *ValC = dyn_cast<Constant>(Val); |
| auto *IdxC = dyn_cast<Constant>(Idx); |
| if (VecC && ValC && IdxC) |
| return ConstantFoldInsertElementInstruction(VecC, ValC, IdxC); |
| |
| // Fold into undef if index is out of bounds. |
| if (auto *CI = dyn_cast<ConstantInt>(Idx)) { |
| uint64_t NumElements = cast<VectorType>(Vec->getType())->getNumElements(); |
| if (CI->uge(NumElements)) |
| return UndefValue::get(Vec->getType()); |
| } |
| |
| // If index is undef, it might be out of bounds (see above case) |
| if (isa<UndefValue>(Idx)) |
| return UndefValue::get(Vec->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an ExtractValueInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyExtractValueInst(Value *Agg, ArrayRef<unsigned> Idxs, |
| const SimplifyQuery &, unsigned) { |
| if (auto *CAgg = dyn_cast<Constant>(Agg)) |
| return ConstantFoldExtractValueInstruction(CAgg, Idxs); |
| |
| // extractvalue x, (insertvalue y, elt, n), n -> elt |
| unsigned NumIdxs = Idxs.size(); |
| for (auto *IVI = dyn_cast<InsertValueInst>(Agg); IVI != nullptr; |
| IVI = dyn_cast<InsertValueInst>(IVI->getAggregateOperand())) { |
| ArrayRef<unsigned> InsertValueIdxs = IVI->getIndices(); |
| unsigned NumInsertValueIdxs = InsertValueIdxs.size(); |
| unsigned NumCommonIdxs = std::min(NumInsertValueIdxs, NumIdxs); |
| if (InsertValueIdxs.slice(0, NumCommonIdxs) == |
| Idxs.slice(0, NumCommonIdxs)) { |
| if (NumIdxs == NumInsertValueIdxs) |
| return IVI->getInsertedValueOperand(); |
| break; |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyExtractValueInst(Value *Agg, ArrayRef<unsigned> Idxs, |
| const SimplifyQuery &Q) { |
| return ::SimplifyExtractValueInst(Agg, Idxs, Q, RecursionLimit); |
| } |
| |
| /// Given operands for an ExtractElementInst, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyExtractElementInst(Value *Vec, Value *Idx, const SimplifyQuery &, |
| unsigned) { |
| if (auto *CVec = dyn_cast<Constant>(Vec)) { |
| if (auto *CIdx = dyn_cast<Constant>(Idx)) |
| return ConstantFoldExtractElementInstruction(CVec, CIdx); |
| |
| // The index is not relevant if our vector is a splat. |
| if (auto *Splat = CVec->getSplatValue()) |
| return Splat; |
| |
| if (isa<UndefValue>(Vec)) |
| return UndefValue::get(Vec->getType()->getVectorElementType()); |
| } |
| |
| // If extracting a specified index from the vector, see if we can recursively |
| // find a previously computed scalar that was inserted into the vector. |
| if (auto *IdxC = dyn_cast<ConstantInt>(Idx)) { |
| if (IdxC->getValue().uge(Vec->getType()->getVectorNumElements())) |
| // definitely out of bounds, thus undefined result |
| return UndefValue::get(Vec->getType()->getVectorElementType()); |
| if (Value *Elt = findScalarElement(Vec, IdxC->getZExtValue())) |
| return Elt; |
| } |
| |
| // An undef extract index can be arbitrarily chosen to be an out-of-range |
| // index value, which would result in the instruction being undef. |
| if (isa<UndefValue>(Idx)) |
| return UndefValue::get(Vec->getType()->getVectorElementType()); |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyExtractElementInst(Value *Vec, Value *Idx, |
| const SimplifyQuery &Q) { |
| return ::SimplifyExtractElementInst(Vec, Idx, Q, RecursionLimit); |
| } |
| |
| /// See if we can fold the given phi. If not, returns null. |
| static Value *SimplifyPHINode(PHINode *PN, const SimplifyQuery &Q) { |
| // If all of the PHI's incoming values are the same then replace the PHI node |
| // with the common value. |
| Value *CommonValue = nullptr; |
| bool HasUndefInput = false; |
| for (Value *Incoming : PN->incoming_values()) { |
| // If the incoming value is the phi node itself, it can safely be skipped. |
| if (Incoming == PN) continue; |
| if (isa<UndefValue>(Incoming)) { |
| // Remember that we saw an undef value, but otherwise ignore them. |
| HasUndefInput = true; |
| continue; |
| } |
| if (CommonValue && Incoming != CommonValue) |
| return nullptr; // Not the same, bail out. |
| CommonValue = Incoming; |
| } |
| |
| // If CommonValue is null then all of the incoming values were either undef or |
| // equal to the phi node itself. |
| if (!CommonValue) |
| return UndefValue::get(PN->getType()); |
| |
| // If we have a PHI node like phi(X, undef, X), where X is defined by some |
| // instruction, we cannot return X as the result of the PHI node unless it |
| // dominates the PHI block. |
| if (HasUndefInput) |
| return valueDominatesPHI(CommonValue, PN, Q.DT) ? CommonValue : nullptr; |
| |
| return CommonValue; |
| } |
| |
| static Value *SimplifyCastInst(unsigned CastOpc, Value *Op, |
| Type *Ty, const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (auto *C = dyn_cast<Constant>(Op)) |
| return ConstantFoldCastOperand(CastOpc, C, Ty, Q.DL); |
| |
| if (auto *CI = dyn_cast<CastInst>(Op)) { |
| auto *Src = CI->getOperand(0); |
| Type *SrcTy = Src->getType(); |
| Type *MidTy = CI->getType(); |
| Type *DstTy = Ty; |
| if (Src->getType() == Ty) { |
| auto FirstOp = static_cast<Instruction::CastOps>(CI->getOpcode()); |
| auto SecondOp = static_cast<Instruction::CastOps>(CastOpc); |
| Type *SrcIntPtrTy = |
| SrcTy->isPtrOrPtrVectorTy() ? Q.DL.getIntPtrType(SrcTy) : nullptr; |
| Type *MidIntPtrTy = |
| MidTy->isPtrOrPtrVectorTy() ? Q.DL.getIntPtrType(MidTy) : nullptr; |
| Type *DstIntPtrTy = |
| DstTy->isPtrOrPtrVectorTy() ? Q.DL.getIntPtrType(DstTy) : nullptr; |
| if (CastInst::isEliminableCastPair(FirstOp, SecondOp, SrcTy, MidTy, DstTy, |
| SrcIntPtrTy, MidIntPtrTy, |
| DstIntPtrTy) == Instruction::BitCast) |
| return Src; |
| } |
| } |
| |
| // bitcast x -> x |
| if (CastOpc == Instruction::BitCast) |
| if (Op->getType() == Ty) |
| return Op; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyCastInst(unsigned CastOpc, Value *Op, Type *Ty, |
| const SimplifyQuery &Q) { |
| return ::SimplifyCastInst(CastOpc, Op, Ty, Q, RecursionLimit); |
| } |
| |
| /// For the given destination element of a shuffle, peek through shuffles to |
| /// match a root vector source operand that contains that element in the same |
| /// vector lane (ie, the same mask index), so we can eliminate the shuffle(s). |
| static Value *foldIdentityShuffles(int DestElt, Value *Op0, Value *Op1, |
| int MaskVal, Value *RootVec, |
| unsigned MaxRecurse) { |
| if (!MaxRecurse--) |
| return nullptr; |
| |
| // Bail out if any mask value is undefined. That kind of shuffle may be |
| // simplified further based on demanded bits or other folds. |
| if (MaskVal == -1) |
| return nullptr; |
| |
| // The mask value chooses which source operand we need to look at next. |
| int InVecNumElts = Op0->getType()->getVectorNumElements(); |
| int RootElt = MaskVal; |
| Value *SourceOp = Op0; |
| if (MaskVal >= InVecNumElts) { |
| RootElt = MaskVal - InVecNumElts; |
| SourceOp = Op1; |
| } |
| |
| // If the source operand is a shuffle itself, look through it to find the |
| // matching root vector. |
| if (auto *SourceShuf = dyn_cast<ShuffleVectorInst>(SourceOp)) { |
| return foldIdentityShuffles( |
| DestElt, SourceShuf->getOperand(0), SourceShuf->getOperand(1), |
| SourceShuf->getMaskValue(RootElt), RootVec, MaxRecurse); |
| } |
| |
| // TODO: Look through bitcasts? What if the bitcast changes the vector element |
| // size? |
| |
| // The source operand is not a shuffle. Initialize the root vector value for |
| // this shuffle if that has not been done yet. |
| if (!RootVec) |
| RootVec = SourceOp; |
| |
| // Give up as soon as a source operand does not match the existing root value. |
| if (RootVec != SourceOp) |
| return nullptr; |
| |
| // The element must be coming from the same lane in the source vector |
| // (although it may have crossed lanes in intermediate shuffles). |
| if (RootElt != DestElt) |
| return nullptr; |
| |
| return RootVec; |
| } |
| |
| static Value *SimplifyShuffleVectorInst(Value *Op0, Value *Op1, Constant *Mask, |
| Type *RetTy, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| if (isa<UndefValue>(Mask)) |
| return UndefValue::get(RetTy); |
| |
| Type *InVecTy = Op0->getType(); |
| unsigned MaskNumElts = Mask->getType()->getVectorNumElements(); |
| unsigned InVecNumElts = InVecTy->getVectorNumElements(); |
| |
| SmallVector<int, 32> Indices; |
| ShuffleVectorInst::getShuffleMask(Mask, Indices); |
| assert(MaskNumElts == Indices.size() && |
| "Size of Indices not same as number of mask elements?"); |
| |
| // Canonicalization: If mask does not select elements from an input vector, |
| // replace that input vector with undef. |
| bool MaskSelects0 = false, MaskSelects1 = false; |
| for (unsigned i = 0; i != MaskNumElts; ++i) { |
| if (Indices[i] == -1) |
| continue; |
| if ((unsigned)Indices[i] < InVecNumElts) |
| MaskSelects0 = true; |
| else |
| MaskSelects1 = true; |
| } |
| if (!MaskSelects0) |
| Op0 = UndefValue::get(InVecTy); |
| if (!MaskSelects1) |
| Op1 = UndefValue::get(InVecTy); |
| |
| auto *Op0Const = dyn_cast<Constant>(Op0); |
| auto *Op1Const = dyn_cast<Constant>(Op1); |
| |
| // If all operands are constant, constant fold the shuffle. |
| if (Op0Const && Op1Const) |
| return ConstantFoldShuffleVectorInstruction(Op0Const, Op1Const, Mask); |
| |
| // Canonicalization: if only one input vector is constant, it shall be the |
| // second one. |
| if (Op0Const && !Op1Const) { |
| std::swap(Op0, Op1); |
| ShuffleVectorInst::commuteShuffleMask(Indices, InVecNumElts); |
| } |
| |
| // A shuffle of a splat is always the splat itself. Legal if the shuffle's |
| // value type is same as the input vectors' type. |
| if (auto *OpShuf = dyn_cast<ShuffleVectorInst>(Op0)) |
| if (isa<UndefValue>(Op1) && RetTy == InVecTy && |
| OpShuf->getMask()->getSplatValue()) |
| return Op0; |
| |
| // Don't fold a shuffle with undef mask elements. This may get folded in a |
| // better way using demanded bits or other analysis. |
| // TODO: Should we allow this? |
| if (find(Indices, -1) != Indices.end()) |
| return nullptr; |
| |
| // Check if every element of this shuffle can be mapped back to the |
| // corresponding element of a single root vector. If so, we don't need this |
| // shuffle. This handles simple identity shuffles as well as chains of |
| // shuffles that may widen/narrow and/or move elements across lanes and back. |
| Value *RootVec = nullptr; |
| for (unsigned i = 0; i != MaskNumElts; ++i) { |
| // Note that recursion is limited for each vector element, so if any element |
| // exceeds the limit, this will fail to simplify. |
| RootVec = |
| foldIdentityShuffles(i, Op0, Op1, Indices[i], RootVec, MaxRecurse); |
| |
| // We can't replace a widening/narrowing shuffle with one of its operands. |
| if (!RootVec || RootVec->getType() != RetTy) |
| return nullptr; |
| } |
| return RootVec; |
| } |
| |
| /// Given operands for a ShuffleVectorInst, fold the result or return null. |
| Value *llvm::SimplifyShuffleVectorInst(Value *Op0, Value *Op1, Constant *Mask, |
| Type *RetTy, const SimplifyQuery &Q) { |
| return ::SimplifyShuffleVectorInst(Op0, Op1, Mask, RetTy, Q, RecursionLimit); |
| } |
| |
| static Constant *propagateNaN(Constant *In) { |
| // If the input is a vector with undef elements, just return a default NaN. |
| if (!In->isNaN()) |
| return ConstantFP::getNaN(In->getType()); |
| |
| // Propagate the existing NaN constant when possible. |
| // TODO: Should we quiet a signaling NaN? |
| return In; |
| } |
| |
| static Constant *simplifyFPBinop(Value *Op0, Value *Op1) { |
| if (isa<UndefValue>(Op0) || isa<UndefValue>(Op1)) |
| return ConstantFP::getNaN(Op0->getType()); |
| |
| if (match(Op0, m_NaN())) |
| return propagateNaN(cast<Constant>(Op0)); |
| if (match(Op1, m_NaN())) |
| return propagateNaN(cast<Constant>(Op1)); |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an FAdd, see if we can fold the result. If not, this |
| /// returns null. |
| static Value *SimplifyFAddInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::FAdd, Op0, Op1, Q)) |
| return C; |
| |
| if (Constant *C = simplifyFPBinop(Op0, Op1)) |
| return C; |
| |
| // fadd X, -0 ==> X |
| if (match(Op1, m_NegZeroFP())) |
| return Op0; |
| |
| // fadd X, 0 ==> X, when we know X is not -0 |
| if (match(Op1, m_PosZeroFP()) && |
| (FMF.noSignedZeros() || CannotBeNegativeZero(Op0, Q.TLI))) |
| return Op0; |
| |
| // With nnan: (+/-0.0 - X) + X --> 0.0 (and commuted variant) |
| // We don't have to explicitly exclude infinities (ninf): INF + -INF == NaN. |
| // Negative zeros are allowed because we always end up with positive zero: |
| // X = -0.0: (-0.0 - (-0.0)) + (-0.0) == ( 0.0) + (-0.0) == 0.0 |
| // X = -0.0: ( 0.0 - (-0.0)) + (-0.0) == ( 0.0) + (-0.0) == 0.0 |
| // X = 0.0: (-0.0 - ( 0.0)) + ( 0.0) == (-0.0) + ( 0.0) == 0.0 |
| // X = 0.0: ( 0.0 - ( 0.0)) + ( 0.0) == ( 0.0) + ( 0.0) == 0.0 |
| if (FMF.noNaNs() && (match(Op0, m_FSub(m_AnyZeroFP(), m_Specific(Op1))) || |
| match(Op1, m_FSub(m_AnyZeroFP(), m_Specific(Op0))))) |
| return ConstantFP::getNullValue(Op0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Given operands for an FSub, see if we can fold the result. If not, this |
| /// returns null. |
| static Value *SimplifyFSubInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::FSub, Op0, Op1, Q)) |
| return C; |
| |
| if (Constant *C = simplifyFPBinop(Op0, Op1)) |
| return C; |
| |
| // fsub X, +0 ==> X |
| if (match(Op1, m_PosZeroFP())) |
| return Op0; |
| |
| // fsub X, -0 ==> X, when we know X is not -0 |
| if (match(Op1, m_NegZeroFP()) && |
| (FMF.noSignedZeros() || CannotBeNegativeZero(Op0, Q.TLI))) |
| return Op0; |
| |
| // fsub -0.0, (fsub -0.0, X) ==> X |
| Value *X; |
| if (match(Op0, m_NegZeroFP()) && |
| match(Op1, m_FSub(m_NegZeroFP(), m_Value(X)))) |
| return X; |
| |
| // fsub 0.0, (fsub 0.0, X) ==> X if signed zeros are ignored. |
| if (FMF.noSignedZeros() && match(Op0, m_AnyZeroFP()) && |
| match(Op1, m_FSub(m_AnyZeroFP(), m_Value(X)))) |
| return X; |
| |
| // fsub nnan x, x ==> 0.0 |
| if (FMF.noNaNs() && Op0 == Op1) |
| return Constant::getNullValue(Op0->getType()); |
| |
| return nullptr; |
| } |
| |
| /// Given the operands for an FMul, see if we can fold the result |
| static Value *SimplifyFMulInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::FMul, Op0, Op1, Q)) |
| return C; |
| |
| if (Constant *C = simplifyFPBinop(Op0, Op1)) |
| return C; |
| |
| // fmul X, 1.0 ==> X |
| if (match(Op1, m_FPOne())) |
| return Op0; |
| |
| // fmul nnan nsz X, 0 ==> 0 |
| if (FMF.noNaNs() && FMF.noSignedZeros() && match(Op1, m_AnyZeroFP())) |
| return ConstantFP::getNullValue(Op0->getType()); |
| |
| // sqrt(X) * sqrt(X) --> X, if we can: |
| // 1. Remove the intermediate rounding (reassociate). |
| // 2. Ignore non-zero negative numbers because sqrt would produce NAN. |
| // 3. Ignore -0.0 because sqrt(-0.0) == -0.0, but -0.0 * -0.0 == 0.0. |
| Value *X; |
| if (Op0 == Op1 && match(Op0, m_Intrinsic<Intrinsic::sqrt>(m_Value(X))) && |
| FMF.allowReassoc() && FMF.noNaNs() && FMF.noSignedZeros()) |
| return X; |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyFAddInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q) { |
| return ::SimplifyFAddInst(Op0, Op1, FMF, Q, RecursionLimit); |
| } |
| |
| |
| Value *llvm::SimplifyFSubInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q) { |
| return ::SimplifyFSubInst(Op0, Op1, FMF, Q, RecursionLimit); |
| } |
| |
| Value *llvm::SimplifyFMulInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q) { |
| return ::SimplifyFMulInst(Op0, Op1, FMF, Q, RecursionLimit); |
| } |
| |
| static Value *SimplifyFDivInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q, unsigned) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::FDiv, Op0, Op1, Q)) |
| return C; |
| |
| if (Constant *C = simplifyFPBinop(Op0, Op1)) |
| return C; |
| |
| // X / 1.0 -> X |
| if (match(Op1, m_FPOne())) |
| return Op0; |
| |
| // 0 / X -> 0 |
| // Requires that NaNs are off (X could be zero) and signed zeroes are |
| // ignored (X could be positive or negative, so the output sign is unknown). |
| if (FMF.noNaNs() && FMF.noSignedZeros() && match(Op0, m_AnyZeroFP())) |
| return ConstantFP::getNullValue(Op0->getType()); |
| |
| if (FMF.noNaNs()) { |
| // X / X -> 1.0 is legal when NaNs are ignored. |
| // We can ignore infinities because INF/INF is NaN. |
| if (Op0 == Op1) |
| return ConstantFP::get(Op0->getType(), 1.0); |
| |
| // (X * Y) / Y --> X if we can reassociate to the above form. |
| Value *X; |
| if (FMF.allowReassoc() && match(Op0, m_c_FMul(m_Value(X), m_Specific(Op1)))) |
| return X; |
| |
| // -X / X -> -1.0 and |
| // X / -X -> -1.0 are legal when NaNs are ignored. |
| // We can ignore signed zeros because +-0.0/+-0.0 is NaN and ignored. |
| if ((BinaryOperator::isFNeg(Op0, /*IgnoreZeroSign=*/true) && |
| BinaryOperator::getFNegArgument(Op0) == Op1) || |
| (BinaryOperator::isFNeg(Op1, /*IgnoreZeroSign=*/true) && |
| BinaryOperator::getFNegArgument(Op1) == Op0)) |
| return ConstantFP::get(Op0->getType(), -1.0); |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyFDivInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q) { |
| return ::SimplifyFDivInst(Op0, Op1, FMF, Q, RecursionLimit); |
| } |
| |
| static Value *SimplifyFRemInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q, unsigned) { |
| if (Constant *C = foldOrCommuteConstant(Instruction::FRem, Op0, Op1, Q)) |
| return C; |
| |
| if (Constant *C = simplifyFPBinop(Op0, Op1)) |
| return C; |
| |
| // Unlike fdiv, the result of frem always matches the sign of the dividend. |
| // The constant match may include undef elements in a vector, so return a full |
| // zero constant as the result. |
| if (FMF.noNaNs()) { |
| // +0 % X -> 0 |
| if (match(Op0, m_PosZeroFP())) |
| return ConstantFP::getNullValue(Op0->getType()); |
| // -0 % X -> -0 |
| if (match(Op0, m_NegZeroFP())) |
| return ConstantFP::getNegativeZero(Op0->getType()); |
| } |
| |
| return nullptr; |
| } |
| |
| Value *llvm::SimplifyFRemInst(Value *Op0, Value *Op1, FastMathFlags FMF, |
| const SimplifyQuery &Q) { |
| return ::SimplifyFRemInst(Op0, Op1, FMF, Q, RecursionLimit); |
| } |
| |
| //=== Helper functions for higher up the class hierarchy. |
| |
| /// Given operands for a BinaryOperator, see if we can fold the result. |
| /// If not, this returns null. |
| static Value *SimplifyBinOp(unsigned Opcode, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| switch (Opcode) { |
| case Instruction::Add: |
| return SimplifyAddInst(LHS, RHS, false, false, Q, MaxRecurse); |
| case Instruction::Sub: |
| return SimplifySubInst(LHS, RHS, false, false, Q, MaxRecurse); |
| case Instruction::Mul: |
| return SimplifyMulInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::SDiv: |
| return SimplifySDivInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::UDiv: |
| return SimplifyUDivInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::SRem: |
| return SimplifySRemInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::URem: |
| return SimplifyURemInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::Shl: |
| return SimplifyShlInst(LHS, RHS, false, false, Q, MaxRecurse); |
| case Instruction::LShr: |
| return SimplifyLShrInst(LHS, RHS, false, Q, MaxRecurse); |
| case Instruction::AShr: |
| return SimplifyAShrInst(LHS, RHS, false, Q, MaxRecurse); |
| case Instruction::And: |
| return SimplifyAndInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::Or: |
| return SimplifyOrInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::Xor: |
| return SimplifyXorInst(LHS, RHS, Q, MaxRecurse); |
| case Instruction::FAdd: |
| return SimplifyFAddInst(LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| case Instruction::FSub: |
| return SimplifyFSubInst(LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| case Instruction::FMul: |
| return SimplifyFMulInst(LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| case Instruction::FDiv: |
| return SimplifyFDivInst(LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| case Instruction::FRem: |
| return SimplifyFRemInst(LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| default: |
| llvm_unreachable("Unexpected opcode"); |
| } |
| } |
| |
| /// Given operands for a BinaryOperator, see if we can fold the result. |
| /// If not, this returns null. |
| /// In contrast to SimplifyBinOp, try to use FastMathFlag when folding the |
| /// result. In case we don't need FastMathFlags, simply fall to SimplifyBinOp. |
| static Value *SimplifyFPBinOp(unsigned Opcode, Value *LHS, Value *RHS, |
| const FastMathFlags &FMF, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| switch (Opcode) { |
| case Instruction::FAdd: |
| return SimplifyFAddInst(LHS, RHS, FMF, Q, MaxRecurse); |
| case Instruction::FSub: |
| return SimplifyFSubInst(LHS, RHS, FMF, Q, MaxRecurse); |
| case Instruction::FMul: |
| return SimplifyFMulInst(LHS, RHS, FMF, Q, MaxRecurse); |
| case Instruction::FDiv: |
| return SimplifyFDivInst(LHS, RHS, FMF, Q, MaxRecurse); |
| default: |
| return SimplifyBinOp(Opcode, LHS, RHS, Q, MaxRecurse); |
| } |
| } |
| |
| Value *llvm::SimplifyBinOp(unsigned Opcode, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q) { |
| return ::SimplifyBinOp(Opcode, LHS, RHS, Q, RecursionLimit); |
| } |
| |
| Value *llvm::SimplifyFPBinOp(unsigned Opcode, Value *LHS, Value *RHS, |
| FastMathFlags FMF, const SimplifyQuery &Q) { |
| return ::SimplifyFPBinOp(Opcode, LHS, RHS, FMF, Q, RecursionLimit); |
| } |
| |
| /// Given operands for a CmpInst, see if we can fold the result. |
| static Value *SimplifyCmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q, unsigned MaxRecurse) { |
| if (CmpInst::isIntPredicate((CmpInst::Predicate)Predicate)) |
| return SimplifyICmpInst(Predicate, LHS, RHS, Q, MaxRecurse); |
| return SimplifyFCmpInst(Predicate, LHS, RHS, FastMathFlags(), Q, MaxRecurse); |
| } |
| |
| Value *llvm::SimplifyCmpInst(unsigned Predicate, Value *LHS, Value *RHS, |
| const SimplifyQuery &Q) { |
| return ::SimplifyCmpInst(Predicate, LHS, RHS, Q, RecursionLimit); |
| } |
| |
| static bool IsIdempotent(Intrinsic::ID ID) { |
| switch (ID) { |
| default: return false; |
| |
| // Unary idempotent: f(f(x)) = f(x) |
| case Intrinsic::fabs: |
| case Intrinsic::floor: |
| case Intrinsic::ceil: |
| case Intrinsic::trunc: |
| case Intrinsic::rint: |
| case Intrinsic::nearbyint: |
| case Intrinsic::round: |
| case Intrinsic::canonicalize: |
| return true; |
| } |
| } |
| |
| static Value *SimplifyRelativeLoad(Constant *Ptr, Constant *Offset, |
| const DataLayout &DL) { |
| GlobalValue *PtrSym; |
| APInt PtrOffset; |
| if (!IsConstantOffsetFromGlobal(Ptr, PtrSym, PtrOffset, DL)) |
| return nullptr; |
| |
| Type *Int8PtrTy = Type::getInt8PtrTy(Ptr->getContext()); |
| Type *Int32Ty = Type::getInt32Ty(Ptr->getContext()); |
| Type *Int32PtrTy = Int32Ty->getPointerTo(); |
| Type *Int64Ty = Type::getInt64Ty(Ptr->getContext()); |
| |
| auto *OffsetConstInt = dyn_cast<ConstantInt>(Offset); |
| if (!OffsetConstInt || OffsetConstInt->getType()->getBitWidth() > 64) |
| return nullptr; |
| |
| uint64_t OffsetInt = OffsetConstInt->getSExtValue(); |
| if (OffsetInt % 4 != 0) |
| return nullptr; |
| |
| Constant *C = ConstantExpr::getGetElementPtr( |
| Int32Ty, ConstantExpr::getBitCast(Ptr, Int32PtrTy), |
| ConstantInt::get(Int64Ty, OffsetInt / 4)); |
| Constant *Loaded = ConstantFoldLoadFromConstPtr(C, Int32Ty, DL); |
| if (!Loaded) |
| return nullptr; |
| |
| auto *LoadedCE = dyn_cast<ConstantExpr>(Loaded); |
| if (!LoadedCE) |
| return nullptr; |
| |
| if (LoadedCE->getOpcode() == Instruction::Trunc) { |
| LoadedCE = dyn_cast<ConstantExpr>(LoadedCE->getOperand(0)); |
| if (!LoadedCE) |
| return nullptr; |
| } |
| |
| if (LoadedCE->getOpcode() != Instruction::Sub) |
| return nullptr; |
| |
| auto *LoadedLHS = dyn_cast<ConstantExpr>(LoadedCE->getOperand(0)); |
| if (!LoadedLHS || LoadedLHS->getOpcode() != Instruction::PtrToInt) |
| return nullptr; |
| auto *LoadedLHSPtr = LoadedLHS->getOperand(0); |
| |
| Constant *LoadedRHS = LoadedCE->getOperand(1); |
| GlobalValue *LoadedRHSSym; |
| APInt LoadedRHSOffset; |
| if (!IsConstantOffsetFromGlobal(LoadedRHS, LoadedRHSSym, LoadedRHSOffset, |
| DL) || |
| PtrSym != LoadedRHSSym || PtrOffset != LoadedRHSOffset) |
| return nullptr; |
| |
| return ConstantExpr::getBitCast(LoadedLHSPtr, Int8PtrTy); |
| } |
| |
| static bool maskIsAllZeroOrUndef(Value *Mask) { |
| auto *ConstMask = dyn_cast<Constant>(Mask); |
| if (!ConstMask) |
| return false; |
| if (ConstMask->isNullValue() || isa<UndefValue>(ConstMask)) |
| return true; |
| for (unsigned I = 0, E = ConstMask->getType()->getVectorNumElements(); I != E; |
| ++I) { |
| if (auto *MaskElt = ConstMask->getAggregateElement(I)) |
| if (MaskElt->isNullValue() || isa<UndefValue>(MaskElt)) |
| continue; |
| return false; |
| } |
| return true; |
| } |
| |
| static Value *simplifyUnaryIntrinsic(Function *F, Value *Op0, |
| const SimplifyQuery &Q) { |
| // Idempotent functions return the same result when called repeatedly. |
| Intrinsic::ID IID = F->getIntrinsicID(); |
| if (IsIdempotent(IID)) |
| if (auto *II = dyn_cast<IntrinsicInst>(Op0)) |
| if (II->getIntrinsicID() == IID) |
| return II; |
| |
| Value *X; |
| switch (IID) { |
| case Intrinsic::fabs: |
| if (SignBitMustBeZero(Op0, Q.TLI)) return Op0; |
| break; |
| case Intrinsic::bswap: |
| // bswap(bswap(x)) -> x |
| if (match(Op0, m_BSwap(m_Value(X)))) return X; |
| break; |
| case Intrinsic::bitreverse: |
| // bitreverse(bitreverse(x)) -> x |
| if (match(Op0, m_BitReverse(m_Value(X)))) return X; |
| break; |
| case Intrinsic::exp: |
| // exp(log(x)) -> x |
| if (Q.CxtI->hasAllowReassoc() && |
| match(Op0, m_Intrinsic<Intrinsic::log>(m_Value(X)))) return X; |
| break; |
| case Intrinsic::exp2: |
| // exp2(log2(x)) -> x |
| if (Q.CxtI->hasAllowReassoc() && |
| match(Op0, m_Intrinsic<Intrinsic::log2>(m_Value(X)))) return X; |
| break; |
| case Intrinsic::log: |
| // log(exp(x)) -> x |
| if (Q.CxtI->hasAllowReassoc() && |
| match(Op0, m_Intrinsic<Intrinsic::exp>(m_Value(X)))) return X; |
| break; |
| case Intrinsic::log2: |
| // log2(exp2(x)) -> x |
| if (Q.CxtI->hasAllowReassoc() && |
| match(Op0, m_Intrinsic<Intrinsic::exp2>(m_Value(X)))) return X; |
| break; |
| default: |
| break; |
| } |
| |
| return nullptr; |
| } |
| |
| static Value *simplifyBinaryIntrinsic(Function *F, Value *Op0, Value *Op1, |
| const SimplifyQuery &Q) { |
| Intrinsic::ID IID = F->getIntrinsicID(); |
| Type *ReturnType = F->getReturnType(); |
| switch (IID) { |
| case Intrinsic::usub_with_overflow: |
| case Intrinsic::ssub_with_overflow: |
| // X - X -> { 0, false } |
| if (Op0 == Op1) |
| return Constant::getNullValue(ReturnType); |
| // X - undef -> undef |
| // undef - X -> undef |
| if (isa<UndefValue>(Op0) || isa<UndefValue>(Op1)) |
| return UndefValue::get(ReturnType); |
| break; |
| case Intrinsic::uadd_with_overflow: |
| case Intrinsic::sadd_with_overflow: |
| // X + undef -> undef |
| if (isa<UndefValue>(Op0) || isa<UndefValue>(Op1)) |
| return UndefValue::get(ReturnType); |
| break; |
| case Intrinsic::umul_with_overflow: |
| case Intrinsic::smul_with_overflow: |
| // 0 * X -> { 0, false } |
| // X * 0 -> { 0, false } |
| if (match(Op0, m_Zero()) || match(Op1, m_Zero())) |
| return Constant::getNullValue(ReturnType); |
| // undef * X -> { 0, false } |
| // X * undef -> { 0, false } |
| if (match(Op0, m_Undef()) || match(Op1, m_Undef())) |
| return Constant::getNullValue(ReturnType); |
| break; |
| case Intrinsic::load_relative: |
| if (auto *C0 = dyn_cast<Constant>(Op0)) |
| if (auto *C1 = dyn_cast<Constant>(Op1)) |
| return SimplifyRelativeLoad(C0, C1, Q.DL); |
| break; |
| case Intrinsic::powi: |
| if (auto *Power = dyn_cast<ConstantInt>(Op1)) { |
| // powi(x, 0) -> 1.0 |
| if (Power->isZero()) |
| return ConstantFP::get(Op0->getType(), 1.0); |
| // powi(x, 1) -> x |
| if (Power->isOne()) |
| return Op0; |
| } |
| break; |
| case Intrinsic::maxnum: |
| case Intrinsic::minnum: |
| // If one argument is NaN, return the other argument. |
| if (match(Op0, m_NaN())) return Op1; |
| if (match(Op1, m_NaN())) return Op0; |
| break; |
| default: |
| break; |
| } |
| |
| return nullptr; |
| } |
| |
| template <typename IterTy> |
| static Value *simplifyIntrinsic(Function *F, IterTy ArgBegin, IterTy ArgEnd, |
| const SimplifyQuery &Q) { |
| // Intrinsics with no operands have some kind of side effect. Don't simplify. |
| unsigned NumOperands = std::distance(ArgBegin, ArgEnd); |
| if (NumOperands == 0) |
| return nullptr; |
| |
| Intrinsic::ID IID = F->getIntrinsicID(); |
| if (NumOperands == 1) |
| return simplifyUnaryIntrinsic(F, ArgBegin[0], Q); |
| |
| if (NumOperands == 2) |
| return simplifyBinaryIntrinsic(F, ArgBegin[0], ArgBegin[1], Q); |
| |
| // Handle intrinsics with 3 or more arguments. |
| switch (IID) { |
| case Intrinsic::masked_load: { |
| Value *MaskArg = ArgBegin[2]; |
| Value *PassthruArg = ArgBegin[3]; |
| // If the mask is all zeros or undef, the "passthru" argument is the result. |
| if (maskIsAllZeroOrUndef(MaskArg)) |
| return PassthruArg; |
| return nullptr; |
| } |
| case Intrinsic::fshl: |
| case Intrinsic::fshr: { |
| Value *ShAmtArg = ArgBegin[2]; |
| const APInt *ShAmtC; |
| if (match(ShAmtArg, m_APInt(ShAmtC))) { |
| // If there's effectively no shift, return the 1st arg or 2nd arg. |
| // TODO: For vectors, we could check each element of a non-splat constant. |
| APInt BitWidth = APInt(ShAmtC->getBitWidth(), ShAmtC->getBitWidth()); |
| if (ShAmtC->urem(BitWidth).isNullValue()) |
| return ArgBegin[IID == Intrinsic::fshl ? 0 : 1]; |
| } |
| return nullptr; |
| } |
| default: |
| return nullptr; |
| } |
| } |
| |
| template <typename IterTy> |
| static Value *SimplifyCall(ImmutableCallSite CS, Value *V, IterTy ArgBegin, |
| IterTy ArgEnd, const SimplifyQuery &Q, |
| unsigned MaxRecurse) { |
| Type *Ty = V->getType(); |
| if (PointerType *PTy = dyn_cast<PointerType>(Ty)) |
| Ty = PTy->getElementType(); |
| FunctionType *FTy = cast<FunctionType>(Ty); |
| |
| // call undef -> undef |
| // call null -> undef |
| if (isa<UndefValue>(V) || isa<ConstantPointerNull>(V)) |
| return UndefValue::get(FTy->getReturnType()); |
| |
| Function *F = dyn_cast<Function>(V); |
| if (!F) |
| return nullptr; |
| |
| if (F->isIntrinsic()) |
| if (Value *Ret = simplifyIntrinsic(F, ArgBegin, ArgEnd, Q)) |
| return Ret; |
| |
| if (!canConstantFoldCallTo(CS, F)) |
| return nullptr; |
| |
| SmallVector<Constant *, 4> ConstantArgs; |
| ConstantArgs.reserve(ArgEnd - ArgBegin); |
| for (IterTy I = ArgBegin, E = ArgEnd; I != E; ++I) { |
| Constant *C = dyn_cast<Constant>(*I); |
| if (!C) |
| return nullptr; |
| ConstantArgs.push_back(C); |
| } |
| |
| return ConstantFoldCall(CS, F, ConstantArgs, Q.TLI); |
| } |
| |
| Value *llvm::SimplifyCall(ImmutableCallSite CS, Value *V, |
| User::op_iterator ArgBegin, User::op_iterator ArgEnd, |
| const SimplifyQuery &Q) { |
| return ::SimplifyCall(CS, V, ArgBegin, ArgEnd, Q, RecursionLimit); |
| } |
| |
| Value *llvm::SimplifyCall(ImmutableCallSite CS, Value *V, |
| ArrayRef<Value *> Args, const SimplifyQuery &Q) { |
| return ::SimplifyCall(CS, V, Args.begin(), Args.end(), Q, RecursionLimit); |
| } |
| |
| Value *llvm::SimplifyCall(ImmutableCallSite ICS, const SimplifyQuery &Q) { |
| CallSite CS(const_cast<Instruction*>(ICS.getInstruction())); |
| return ::SimplifyCall(CS, CS.getCalledValue(), CS.arg_begin(), CS.arg_end(), |
| Q, RecursionLimit); |
| } |
| |
| /// See if we can compute a simplified version of this instruction. |
| /// If not, this returns null. |
| |
| Value *llvm::SimplifyInstruction(Instruction *I, const SimplifyQuery &SQ, |
| OptimizationRemarkEmitter *ORE) { |
| const SimplifyQuery Q = SQ.CxtI ? SQ : SQ.getWithInstruction(I); |
| Value *Result; |
| |
| switch (I->getOpcode()) { |
| default: |
| Result = ConstantFoldInstruction(I, Q.DL, Q.TLI); |
| break; |
| case Instruction::FAdd: |
| Result = SimplifyFAddInst(I->getOperand(0), I->getOperand(1), |
| I->getFastMathFlags(), Q); |
| break; |
| case Instruction::Add: |
| Result = SimplifyAddInst(I->getOperand(0), I->getOperand(1), |
| cast<BinaryOperator>(I)->hasNoSignedWrap(), |
| cast<BinaryOperator>(I)->hasNoUnsignedWrap(), Q); |
| break; |
| case Instruction::FSub: |
| Result = SimplifyFSubInst(I->getOperand(0), I->getOperand(1), |
| I->getFastMathFlags(), Q); |
| break; |
| case Instruction::Sub: |
| Result = SimplifySubInst(I->getOperand(0), I->getOperand(1), |
| cast<BinaryOperator>(I)->hasNoSignedWrap(), |
| cast<BinaryOperator>(I)->hasNoUnsignedWrap(), Q); |
| break; |
| case Instruction::FMul: |
| Result = SimplifyFMulInst(I->getOperand(0), I->getOperand(1), |
| I->getFastMathFlags(), Q); |
| break; |
| case Instruction::Mul: |
| Result = SimplifyMulInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::SDiv: |
| Result = SimplifySDivInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::UDiv: |
| Result = SimplifyUDivInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::FDiv: |
| Result = SimplifyFDivInst(I->getOperand(0), I->getOperand(1), |
| I->getFastMathFlags(), Q); |
| break; |
| case Instruction::SRem: |
| Result = SimplifySRemInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::URem: |
| Result = SimplifyURemInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::FRem: |
| Result = SimplifyFRemInst(I->getOperand(0), I->getOperand(1), |
| I->getFastMathFlags(), Q); |
| break; |
| case Instruction::Shl: |
| Result = SimplifyShlInst(I->getOperand(0), I->getOperand(1), |
| cast<BinaryOperator>(I)->hasNoSignedWrap(), |
| cast<BinaryOperator>(I)->hasNoUnsignedWrap(), Q); |
| break; |
| case Instruction::LShr: |
| Result = SimplifyLShrInst(I->getOperand(0), I->getOperand(1), |
| cast<BinaryOperator>(I)->isExact(), Q); |
| break; |
| case Instruction::AShr: |
| Result = SimplifyAShrInst(I->getOperand(0), I->getOperand(1), |
| cast<BinaryOperator>(I)->isExact(), Q); |
| break; |
| case Instruction::And: |
| Result = SimplifyAndInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::Or: |
| Result = SimplifyOrInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::Xor: |
| Result = SimplifyXorInst(I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::ICmp: |
| Result = SimplifyICmpInst(cast<ICmpInst>(I)->getPredicate(), |
| I->getOperand(0), I->getOperand(1), Q); |
| break; |
| case Instruction::FCmp: |
| Result = |
| SimplifyFCmpInst(cast<FCmpInst>(I)->getPredicate(), I->getOperand(0), |
| I->getOperand(1), I->getFastMathFlags(), Q); |
| break; |
| case Instruction::Select: |
| Result = SimplifySelectInst(I->getOperand(0), I->getOperand(1), |
| I->getOperand(2), Q); |
| break; |
| case Instruction::GetElementPtr: { |
| SmallVector<Value *, 8> Ops(I->op_begin(), I->op_end()); |
| Result = SimplifyGEPInst(cast<GetElementPtrInst>(I)->getSourceElementType(), |
| Ops, Q); |
| break; |
| } |
| case Instruction::InsertValue: { |
| InsertValueInst *IV = cast<InsertValueInst>(I); |
| Result = SimplifyInsertValueInst(IV->getAggregateOperand(), |
| IV->getInsertedValueOperand(), |
| IV->getIndices(), Q); |
| break; |
| } |
| case Instruction::InsertElement: { |
| auto *IE = cast<InsertElementInst>(I); |
| Result = SimplifyInsertElementInst(IE->getOperand(0), IE->getOperand(1), |
| IE->getOperand(2), Q); |
| break; |
| } |
| case Instruction::ExtractValue: { |
| auto *EVI = cast<ExtractValueInst>(I); |
| Result = SimplifyExtractValueInst(EVI->getAggregateOperand(), |
| EVI->getIndices(), Q); |
| break; |
| } |
| case Instruction::ExtractElement: { |
| auto *EEI = cast<ExtractElementInst>(I); |
| Result = SimplifyExtractElementInst(EEI->getVectorOperand(), |
| EEI->getIndexOperand(), Q); |
| break; |
| } |
| case Instruction::ShuffleVector: { |
| auto *SVI = cast<ShuffleVectorInst>(I); |
| Result = SimplifyShuffleVectorInst(SVI->getOperand(0), SVI->getOperand(1), |
| SVI->getMask(), SVI->getType(), Q); |
| break; |
| } |
| case Instruction::PHI: |
| Result = SimplifyPHINode(cast<PHINode>(I), Q); |
| break; |
| case Instruction::Call: { |
| CallSite CS(cast<CallInst>(I)); |
| Result = SimplifyCall(CS, Q); |
| break; |
| } |
| #define HANDLE_CAST_INST(num, opc, clas) case Instruction::opc: |
| #include "llvm/IR/Instruction.def" |
| #undef HANDLE_CAST_INST |
| Result = |
| SimplifyCastInst(I->getOpcode(), I->getOperand(0), I->getType(), Q); |
| break; |
| case Instruction::Alloca: |
| // No simplifications for Alloca and it can't be constant folded. |
| Result = nullptr; |
| break; |
| } |
| |
| // In general, it is possible for computeKnownBits to determine all bits in a |
| // value even when the operands are not all constants. |
| if (!Result && I->getType()->isIntOrIntVectorTy()) { |
| KnownBits Known = computeKnownBits(I, Q.DL, /*Depth*/ 0, Q.AC, I, Q.DT, ORE); |
| if (Known.isConstant()) |
| Result = ConstantInt::get(I->getType(), Known.getConstant()); |
| } |
| |
| /// If called on unreachable code, the above logic may report that the |
| /// instruction simplified to itself. Make life easier for users by |
| /// detecting that case here, returning a safe value instead. |
| return Result == I ? UndefValue::get(I->getType()) : Result; |
| } |
| |
| /// Implementation of recursive simplification through an instruction's |
| /// uses. |
| /// |
| /// This is the common implementation of the recursive simplification routines. |
| /// If we have a pre-simplified value in 'SimpleV', that is forcibly used to |
| /// replace the instruction 'I'. Otherwise, we simply add 'I' to the list of |
| /// instructions to process and attempt to simplify it using |
| /// InstructionSimplify. |
| /// |
| /// This routine returns 'true' only when *it* simplifies something. The passed |
| /// in simplified value does not count toward this. |
| static bool replaceAndRecursivelySimplifyImpl(Instruction *I, Value *SimpleV, |
| const TargetLibraryInfo *TLI, |
| const DominatorTree *DT, |
| AssumptionCache *AC) { |
| bool Simplified = false; |
| SmallSetVector<Instruction *, 8> Worklist; |
| const DataLayout &DL = I->getModule()->getDataLayout(); |
| |
| // If we have an explicit value to collapse to, do that round of the |
| // simplification loop by hand initially. |
| if (SimpleV) { |
| for (User *U : I->users()) |
| if (U != I) |
| Worklist.insert(cast<Instruction>(U)); |
| |
| // Replace the instruction with its simplified value. |
| I->replaceAllUsesWith(SimpleV); |
| |
| // Gracefully handle edge cases where the instruction is not wired into any |
| // parent block. |
| if (I->getParent() && !I->isEHPad() && !isa<TerminatorInst>(I) && |
| !I->mayHaveSideEffects()) |
| I->eraseFromParent(); |
| } else { |
| Worklist.insert(I); |
| } |
| |
| // Note that we must test the size on each iteration, the worklist can grow. |
| for (unsigned Idx = 0; Idx != Worklist.size(); ++Idx) { |
| I = Worklist[Idx]; |
| |
| // See if this instruction simplifies. |
| SimpleV = SimplifyInstruction(I, {DL, TLI, DT, AC}); |
| if (!SimpleV) |
| continue; |
| |
| Simplified = true; |
| |
| // Stash away all the uses of the old instruction so we can check them for |
| // recursive simplifications after a RAUW. This is cheaper than checking all |
| // uses of To on the recursive step in most cases. |
| for (User *U : I->users()) |
| Worklist.insert(cast<Instruction>(U)); |
| |
| // Replace the instruction with its simplified value. |
| I->replaceAllUsesWith(SimpleV); |
| |
| // Gracefully handle edge cases where the instruction is not wired into any |
| // parent block. |
| if (I->getParent() && !I->isEHPad() && !isa<TerminatorInst>(I) && |
| !I->mayHaveSideEffects()) |
| I->eraseFromParent(); |
| } |
| return Simplified; |
| } |
| |
| bool llvm::recursivelySimplifyInstruction(Instruction *I, |
| const TargetLibraryInfo *TLI, |
| const DominatorTree *DT, |
| AssumptionCache *AC) { |
| return replaceAndRecursivelySimplifyImpl(I, nullptr, TLI, DT, AC); |
| } |
| |
| bool llvm::replaceAndRecursivelySimplify(Instruction *I, Value *SimpleV, |
| const TargetLibraryInfo *TLI, |
| const DominatorTree *DT, |
| AssumptionCache *AC) { |
| assert(I != SimpleV && "replaceAndRecursivelySimplify(X,X) is not valid!"); |
| assert(SimpleV && "Must provide a simplified value."); |
| return replaceAndRecursivelySimplifyImpl(I, SimpleV, TLI, DT, AC); |
| } |
| |
| namespace llvm { |
| const SimplifyQuery getBestSimplifyQuery(Pass &P, Function &F) { |
| auto *DTWP = P.getAnalysisIfAvailable<DominatorTreeWrapperPass>(); |
| auto *DT = DTWP ? &DTWP->getDomTree() : nullptr; |
| auto *TLIWP = P.getAnalysisIfAvailable<TargetLibraryInfoWrapperPass>(); |
| auto *TLI = TLIWP ? &TLIWP->getTLI() : nullptr; |
| auto *ACWP = P.getAnalysisIfAvailable<AssumptionCacheTracker>(); |
| auto *AC = ACWP ? &ACWP->getAssumptionCache(F) : nullptr; |
| return {F.getParent()->getDataLayout(), TLI, DT, AC}; |
| } |
| |
| const SimplifyQuery getBestSimplifyQuery(LoopStandardAnalysisResults &AR, |
| const DataLayout &DL) { |
| return {DL, &AR.TLI, &AR.DT, &AR.AC}; |
| } |
| |
| template <class T, class... TArgs> |
| const SimplifyQuery getBestSimplifyQuery(AnalysisManager<T, TArgs...> &AM, |
| Function &F) { |
| auto *DT = AM.template getCachedResult<DominatorTreeAnalysis>(F); |
| auto *TLI = AM.template getCachedResult<TargetLibraryAnalysis>(F); |
| auto *AC = AM.template getCachedResult<AssumptionAnalysis>(F); |
| return {F.getParent()->getDataLayout(), TLI, DT, AC}; |
| } |
| template const SimplifyQuery getBestSimplifyQuery(AnalysisManager<Function> &, |
| Function &); |
| } |