| // Copyright (c) 2015-2016 The Khronos Group Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include <sstream> |
| #include <string> |
| #include <vector> |
| |
| #include "gmock/gmock.h" |
| #include "test/test_fixture.h" |
| #include "test/unit_spirv.h" |
| #include "test/val/val_fixtures.h" |
| |
| // NOTE: The tests in this file are ONLY testing ID usage, there for the input |
| // SPIR-V does not follow the logical layout rules from the spec in all cases in |
| // order to makes the tests smaller. Validation of the whole module is handled |
| // in stages, ID validation is only one of these stages. All validation stages |
| // are stand alone. |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| using spvtest::ScopedContext; |
| using ::testing::HasSubstr; |
| using ::testing::ValuesIn; |
| |
| using ValidateIdWithMessage = spvtest::ValidateBase<bool>; |
| |
| std::string kOpCapabilitySetupWithoutVector16 = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability Int8 |
| OpCapability Int16 |
| OpCapability Int64 |
| OpCapability Float64 |
| OpCapability LiteralSampler |
| OpCapability Pipes |
| OpCapability DeviceEnqueue |
| )"; |
| |
| std::string kOpCapabilitySetup = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability Int8 |
| OpCapability Int16 |
| OpCapability Int64 |
| OpCapability Float64 |
| OpCapability LiteralSampler |
| OpCapability Pipes |
| OpCapability DeviceEnqueue |
| OpCapability Vector16 |
| )"; |
| |
| std::string kOpVariablePtrSetUp = R"( |
| OpCapability VariablePointers |
| OpExtension "SPV_KHR_variable_pointers" |
| )"; |
| |
| std::string kGLSL450MemoryModel = |
| kOpCapabilitySetup + kOpVariablePtrSetUp + R"( |
| OpMemoryModel Logical GLSL450 |
| )"; |
| |
| std::string kGLSL450MemoryModelWithoutVector16 = |
| kOpCapabilitySetupWithoutVector16 + kOpVariablePtrSetUp + R"( |
| OpMemoryModel Logical GLSL450 |
| )"; |
| |
| std::string kNoKernelGLSL450MemoryModel = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability Int8 |
| OpCapability Int16 |
| OpCapability Int64 |
| OpCapability Float64 |
| OpMemoryModel Logical GLSL450 |
| )"; |
| |
| std::string kOpenCLMemoryModel32 = R"( |
| OpCapability Addresses |
| OpCapability Linkage |
| OpCapability Kernel |
| %1 = OpExtInstImport "OpenCL.std" |
| OpMemoryModel Physical32 OpenCL |
| )"; |
| |
| std::string kOpenCLMemoryModel64 = R"( |
| OpCapability Addresses |
| OpCapability Linkage |
| OpCapability Kernel |
| OpCapability Int64 |
| %1 = OpExtInstImport "OpenCL.std" |
| OpMemoryModel Physical64 OpenCL |
| )"; |
| |
| std::string sampledImageSetup = R"( |
| %void = OpTypeVoid |
| %typeFuncVoid = OpTypeFunction %void |
| %float = OpTypeFloat 32 |
| %v4float = OpTypeVector %float 4 |
| %image_type = OpTypeImage %float 2D 0 0 0 1 Unknown |
| %_ptr_UniformConstant_img = OpTypePointer UniformConstant %image_type |
| %tex = OpVariable %_ptr_UniformConstant_img UniformConstant |
| %sampler_type = OpTypeSampler |
| %_ptr_UniformConstant_sam = OpTypePointer UniformConstant %sampler_type |
| %s = OpVariable %_ptr_UniformConstant_sam UniformConstant |
| %sampled_image_type = OpTypeSampledImage %image_type |
| %v2float = OpTypeVector %float 2 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %const_vec_1_1 = OpConstantComposite %v2float %float_1 %float_1 |
| %const_vec_2_2 = OpConstantComposite %v2float %float_2 %float_2 |
| %bool_type = OpTypeBool |
| %spec_true = OpSpecConstantTrue %bool_type |
| %main = OpFunction %void None %typeFuncVoid |
| %label_1 = OpLabel |
| %image_inst = OpLoad %image_type %tex |
| %sampler_inst = OpLoad %sampler_type %s |
| )"; |
| |
| std::string BranchConditionalSetup = R"( |
| OpCapability Shader |
| %1 = OpExtInstImport "GLSL.std.450" |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Fragment %main "main" |
| OpExecutionMode %main OriginUpperLeft |
| OpSource GLSL 140 |
| OpName %main "main" |
| |
| ; type definitions |
| %bool = OpTypeBool |
| %uint = OpTypeInt 32 0 |
| %int = OpTypeInt 32 1 |
| %float = OpTypeFloat 32 |
| %v4float = OpTypeVector %float 4 |
| |
| ; constants |
| %true = OpConstantTrue %bool |
| %i0 = OpConstant %int 0 |
| %i1 = OpConstant %int 1 |
| %f0 = OpConstant %float 0 |
| %f1 = OpConstant %float 1 |
| |
| |
| ; main function header |
| %void = OpTypeVoid |
| %voidfunc = OpTypeFunction %void |
| %main = OpFunction %void None %voidfunc |
| %lmain = OpLabel |
| )"; |
| |
| std::string BranchConditionalTail = R"( |
| %target_t = OpLabel |
| OpNop |
| OpBranch %end |
| %target_f = OpLabel |
| OpNop |
| OpBranch %end |
| |
| %end = OpLabel |
| |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| // TODO: OpUndef |
| |
| TEST_F(ValidateIdWithMessage, OpName) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpName %2 "name" |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer UniformConstant %1 |
| %3 = OpVariable %2 UniformConstant)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpMemberNameGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberName %2 0 "foo" |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeStruct %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpMemberNameTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberName %1 0 "foo" |
| %1 = OpTypeInt 32 0)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpMemberName Type <id> '1[%uint]' is not a struct type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpMemberNameMemberBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberName %1 1 "foo" |
| %2 = OpTypeInt 32 0 |
| %1 = OpTypeStruct %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpMemberName Member <id> '1[%_struct_1]' index is larger " |
| "than Type <id> '1[%_struct_1]'s member count.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLineGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpString "/path/to/source.file" |
| OpLine %1 0 0 |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Input %2 |
| %4 = OpVariable %3 Input)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLineFileBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| OpLine %1 0 0 |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpLine Target <id> '1[%uint]' is not an OpString.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpDecorateGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %2 GLSLShared |
| %1 = OpTypeInt 64 0 |
| %2 = OpTypeStruct %1 %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpDecorateBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %1 GLSLShared)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("forward referenced IDs have not been defined")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpMemberDecorateGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %2 0 RelaxedPrecision |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeStruct %1 %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpMemberDecorateBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 RelaxedPrecision |
| %1 = OpTypeInt 32 0)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpMemberDecorate Structure type <id> '1[%uint]' is " |
| "not a struct type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpMemberDecorateMemberBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 3 RelaxedPrecision |
| %int = OpTypeInt 32 0 |
| %1 = OpTypeStruct %int %int)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Index 3 provided in OpMemberDecorate for struct <id> " |
| "1[%_struct_1] is out of bounds. The structure has 2 " |
| "members. Largest valid index is 1.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpGroupDecorateGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpDecorationGroup |
| OpDecorate %1 RelaxedPrecision |
| OpDecorate %1 GLSLShared |
| OpGroupDecorate %1 %3 %4 |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 42 |
| %4 = OpConstant %2 23)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpDecorationGroupBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpDecorationGroup |
| OpDecorate %1 RelaxedPrecision |
| OpDecorate %1 GLSLShared |
| OpMemberDecorate %1 0 Constant |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Result id of OpDecorationGroup can only " |
| "be targeted by OpName, OpGroupDecorate, " |
| "OpDecorate, OpDecorateId, and OpGroupMemberDecorate")); |
| } |
| TEST_F(ValidateIdWithMessage, OpGroupDecorateDecorationGroupBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| %1 = OpExtInstImport "GLSL.std.450" |
| OpMemoryModel Logical GLSL450 |
| OpGroupDecorate %1 %2 %3 |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 42)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpGroupDecorate Decoration group <id> '1[%1]' is not " |
| "a decoration group.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpGroupDecorateTargetBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpDecorationGroup |
| OpDecorate %1 RelaxedPrecision |
| OpDecorate %1 GLSLShared |
| OpGroupDecorate %1 %3 |
| %2 = OpTypeInt 32 0)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("forward referenced IDs have not been defined")); |
| } |
| TEST_F(ValidateIdWithMessage, OpGroupMemberDecorateDecorationGroupBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| %1 = OpExtInstImport "GLSL.std.450" |
| OpMemoryModel Logical GLSL450 |
| OpGroupMemberDecorate %1 %2 0 |
| %2 = OpTypeInt 32 0)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpGroupMemberDecorate Decoration group <id> '1[%1]' " |
| "is not a decoration group.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpGroupMemberDecorateIdNotStructBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpDecorationGroup |
| OpGroupMemberDecorate %1 %2 0 |
| %2 = OpTypeInt 32 0)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpGroupMemberDecorate Structure type <id> '2[%uint]' " |
| "is not a struct type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpGroupMemberDecorateIndexOutOfBoundBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %1 Offset 0 |
| %1 = OpDecorationGroup |
| OpGroupMemberDecorate %1 %struct 3 |
| %float = OpTypeFloat 32 |
| %struct = OpTypeStruct %float %float %float |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Index 3 provided in OpGroupMemberDecorate for struct " |
| "<id> 2[%_struct_2] is out of bounds. The structure " |
| "has 3 members. Largest valid index is 2.")); |
| } |
| |
| // TODO: OpExtInst |
| |
| TEST_F(ValidateIdWithMessage, OpEntryPointGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %3 "" |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpEntryPointFunctionBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %1 "" |
| %1 = OpTypeVoid)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpEntryPoint Entry Point <id> '1[%void]' is not a " |
| "function.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpEntryPointParameterCountBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %3 "" |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpEntryPoint Entry Point <id> '1[%1]'s function " |
| "parameter count is not zero")); |
| } |
| TEST_F(ValidateIdWithMessage, OpEntryPointReturnTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %3 "" |
| %1 = OpTypeInt 32 0 |
| %ret = OpConstant %1 0 |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturnValue %ret |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpEntryPoint Entry Point <id> '1[%1]'s function " |
| "return type is not void.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpEntryPointInterfaceIsNotVariableTypeBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Geometry |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Geometry %main "main" %ptr_builtin_1 |
| OpExecutionMode %main InputPoints |
| OpExecutionMode %main OutputPoints |
| OpMemberDecorate %struct_1 0 BuiltIn InvocationId |
| %int = OpTypeInt 32 1 |
| %void = OpTypeVoid |
| %func = OpTypeFunction %void |
| %struct_1 = OpTypeStruct %int |
| %ptr_builtin_1 = OpTypePointer Input %struct_1 |
| %main = OpFunction %void None %func |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Interfaces passed to OpEntryPoint must be of type " |
| "OpTypeVariable. Found OpTypePointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpEntryPointInterfaceStorageClassBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Geometry |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Geometry %main "main" %in_1 |
| OpExecutionMode %main InputPoints |
| OpExecutionMode %main OutputPoints |
| OpMemberDecorate %struct_1 0 BuiltIn InvocationId |
| %int = OpTypeInt 32 1 |
| %void = OpTypeVoid |
| %func = OpTypeFunction %void |
| %struct_1 = OpTypeStruct %int |
| %ptr_builtin_1 = OpTypePointer Uniform %struct_1 |
| %in_1 = OpVariable %ptr_builtin_1 Uniform |
| %main = OpFunction %void None %func |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpEntryPoint interfaces must be OpVariables with " |
| "Storage Class of Input(1) or Output(3). Found Storage " |
| "Class 2 for Entry Point id 1.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpExecutionModeGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %3 "" |
| OpExecutionMode %3 LocalSize 1 1 1 |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpExecutionModeEntryPointMissing) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpExecutionMode %3 LocalSize 1 1 1 |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpExecutionMode Entry Point <id> '1[%1]' is not the " |
| "Entry Point operand of an OpEntryPoint.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpExecutionModeEntryPointBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpEntryPoint GLCompute %3 "" %a |
| OpExecutionMode %a LocalSize 1 1 1 |
| %void = OpTypeVoid |
| %ptr = OpTypePointer Input %void |
| %a = OpVariable %ptr Input |
| %2 = OpTypeFunction %void |
| %3 = OpFunction %void None %2 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpExecutionMode Entry Point <id> '2[%2]' is not the " |
| "Entry Point operand of an OpEntryPoint.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorFloat) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorInt) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeVector %1 4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorUInt) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 64 0 |
| %2 = OpTypeVector %1 4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorBool) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpTypeVector %1 4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorComponentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypePointer UniformConstant %1 |
| %3 = OpTypeVector %2 4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpTypeVector Component Type <id> " |
| "'2[%_ptr_UniformConstant_float]' is not a scalar type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorColumnCountLessThanTwoBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Illegal number of components (1) for TypeVector\n %v1float = " |
| "OpTypeVector %float 1\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorColumnCountGreaterThanFourBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Illegal number of components (5) for TypeVector\n %v5float = " |
| "OpTypeVector %float 5\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorColumnCountEightWithoutVector16Bad) { |
| std::string spirv = kGLSL450MemoryModelWithoutVector16 + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 8)"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Having 8 components for TypeVector requires the Vector16 " |
| "capability\n %v8float = OpTypeVector %float 8\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| OpTypeVectorColumnCountSixteenWithoutVector16Bad) { |
| std::string spirv = kGLSL450MemoryModelWithoutVector16 + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 16)"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Having 16 components for TypeVector requires the Vector16 " |
| "capability\n %v16float = OpTypeVector %float 16\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeVectorColumnCountOfEightWithVector16Good) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 8)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| OpTypeVectorColumnCountOfSixteenWithVector16Good) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 16)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeMatrixGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 2 |
| %3 = OpTypeMatrix %2 3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeMatrixColumnTypeNonVectorBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeMatrix %1 3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("olumns in a matrix must be of type vector.\n %mat3float = " |
| "OpTypeMatrix %float 3\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeMatrixVectorTypeNonFloatBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 16 0 |
| %2 = OpTypeVector %1 2 |
| %3 = OpTypeMatrix %2 2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Matrix types can only be parameterized with floating-point " |
| "types.\n %mat2v2ushort = OpTypeMatrix %v2ushort 2\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeMatrixColumnCountLessThanTwoBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 2 |
| %3 = OpTypeMatrix %2 1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Matrix types can only be parameterized as having only 2, 3, " |
| "or 4 columns.\n %mat1v2float = OpTypeMatrix %v2float 1\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeMatrixColumnCountGreaterThanFourBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 2 |
| %3 = OpTypeMatrix %2 8)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Matrix types can only be parameterized as having only 2, 3, " |
| "or 4 columns.\n %mat8v2float = OpTypeMatrix %v2float 8\n")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeSamplerGood) { |
| // In Rev31, OpTypeSampler takes no arguments. |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %s = OpTypeSampler)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeArrayGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 1 |
| %3 = OpTypeArray %1 %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeArrayElementTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 1 |
| %3 = OpTypeArray %2 %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypeArray Element Type <id> '2[%uint_1]' is not a " |
| "type.")); |
| } |
| |
| // Signed or unsigned. |
| enum Signed { kSigned, kUnsigned }; |
| |
| // Creates an assembly snippet declaring OpTypeArray with the given length. |
| std::string MakeArrayLength(const std::string& len, Signed isSigned, |
| int width) { |
| std::ostringstream ss; |
| ss << R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Int16 |
| OpCapability Int64 |
| )"; |
| ss << "OpMemoryModel Logical GLSL450\n"; |
| ss << " %t = OpTypeInt " << width << (isSigned == kSigned ? " 1" : " 0"); |
| ss << " %l = OpConstant %t " << len; |
| ss << " %a = OpTypeArray %t %l"; |
| return ss.str(); |
| } |
| |
| // Tests OpTypeArray. Parameter is the width (in bits) of the array-length's |
| // type. |
| class OpTypeArrayLengthTest |
| : public spvtest::TextToBinaryTestBase<::testing::TestWithParam<int>> { |
| protected: |
| OpTypeArrayLengthTest() |
| : position_(spv_position_t{0, 0, 0}), |
| diagnostic_(spvDiagnosticCreate(&position_, "")) {} |
| |
| ~OpTypeArrayLengthTest() { spvDiagnosticDestroy(diagnostic_); } |
| |
| // Runs spvValidate() on v, printing any errors via spvDiagnosticPrint(). |
| spv_result_t Val(const SpirvVector& v, const std::string& expected_err = "") { |
| spv_const_binary_t cbinary{v.data(), v.size()}; |
| spvDiagnosticDestroy(diagnostic_); |
| diagnostic_ = nullptr; |
| const auto status = |
| spvValidate(ScopedContext().context, &cbinary, &diagnostic_); |
| if (status != SPV_SUCCESS) { |
| spvDiagnosticPrint(diagnostic_); |
| EXPECT_THAT(std::string(diagnostic_->error), |
| testing::ContainsRegex(expected_err)); |
| } |
| return status; |
| } |
| |
| private: |
| spv_position_t position_; // For creating diagnostic_. |
| spv_diagnostic diagnostic_; |
| }; |
| |
| TEST_P(OpTypeArrayLengthTest, LengthPositive) { |
| const int width = GetParam(); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("1", kSigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("1", kUnsigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("2", kSigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("2", kUnsigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("55", kSigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("55", kUnsigned, width)))); |
| const std::string fpad(width / 4 - 1, 'F'); |
| EXPECT_EQ( |
| SPV_SUCCESS, |
| Val(CompileSuccessfully(MakeArrayLength("0x7" + fpad, kSigned, width)))); |
| EXPECT_EQ(SPV_SUCCESS, Val(CompileSuccessfully( |
| MakeArrayLength("0xF" + fpad, kUnsigned, width)))); |
| } |
| |
| TEST_P(OpTypeArrayLengthTest, LengthZero) { |
| const int width = GetParam(); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength("0", kSigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength("0", kUnsigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| } |
| |
| TEST_P(OpTypeArrayLengthTest, LengthNegative) { |
| const int width = GetParam(); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength("-1", kSigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength("-2", kSigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength("-123", kSigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| const std::string neg_max = "0x8" + std::string(width / 4 - 1, '0'); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, |
| Val(CompileSuccessfully(MakeArrayLength(neg_max, kSigned, width)), |
| "OpTypeArray Length <id> '2\\[%.*\\]' default value must be at " |
| "least 1.")); |
| } |
| |
| // The only valid widths for integers are 8, 16, 32, and 64. |
| // Since the Int8 capability requires the Kernel capability, and the Kernel |
| // capability prohibits usage of signed integers, we can skip 8-bit integers |
| // here since the purpose of these tests is to check the validity of |
| // OpTypeArray, not OpTypeInt. |
| INSTANTIATE_TEST_SUITE_P(Widths, OpTypeArrayLengthTest, |
| ValuesIn(std::vector<int>{16, 32, 64})); |
| |
| TEST_F(ValidateIdWithMessage, OpTypeArrayLengthNull) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %i32 = OpTypeInt 32 0 |
| %len = OpConstantNull %i32 |
| %ary = OpTypeArray %i32 %len)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "OpTypeArray Length <id> '2[%2]' default value must be at least 1.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeArrayLengthSpecConst) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %i32 = OpTypeInt 32 0 |
| %len = OpSpecConstant %i32 2 |
| %ary = OpTypeArray %i32 %len)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeArrayLengthSpecConstOp) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %i32 = OpTypeInt 32 0 |
| %c1 = OpConstant %i32 1 |
| %c2 = OpConstant %i32 2 |
| %len = OpSpecConstantOp %i32 IAdd %c1 %c2 |
| %ary = OpTypeArray %i32 %len)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeRuntimeArrayGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeRuntimeArray %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpTypeRuntimeArrayBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 0 |
| %3 = OpTypeRuntimeArray %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpTypeRuntimeArray Element Type <id> '2[%uint_0]' is not a " |
| "type.")); |
| } |
| // TODO: Object of this type can only be created with OpVariable using the |
| // Unifrom Storage Class |
| |
| TEST_F(ValidateIdWithMessage, OpTypeStructGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeFloat 64 |
| %3 = OpTypePointer Input %1 |
| %4 = OpTypeStruct %1 %2 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpTypeStructMemberTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeFloat 64 |
| %3 = OpConstant %2 0.0 |
| %4 = OpTypeStruct %1 %2 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypeStruct Member Type <id> '3[%double_0]' is not " |
| "a type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeStructOpaqueTypeBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Vertex %main "main" |
| %1 = OpTypeSampler |
| %2 = OpTypeStruct %1 |
| %void = OpTypeVoid |
| %3 = OpTypeFunction %void |
| %main = OpFunction %void None %3 |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str(), SPV_ENV_VULKAN_1_0); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypeStruct must not contain an opaque type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypePointerGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer Input %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpTypePointerBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 0 |
| %3 = OpTypePointer Input %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypePointer Type <id> '2[%uint_0]' is not a " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeFunctionGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpTypeFunctionReturnTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 0 |
| %3 = OpTypeFunction %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypeFunction Return Type <id> '2[%uint_0]' is not " |
| "a type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpTypeFunctionParameterBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 0 |
| %4 = OpTypeFunction %1 %2 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpTypeFunction Parameter Type <id> '3[%uint_0]' is not a " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeFunctionParameterTypeVoidBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %4 = OpTypeFunction %1 %2 %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpTypeFunction Parameter Type <id> '1[%void]' cannot " |
| "be OpTypeVoid.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypePipeGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 16 |
| %3 = OpTypePipe ReadOnly)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantTrueGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpConstantTrue %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantTrueBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpConstantTrue %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantTrue Result Type <id> '1[%void]' is not a boolean " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantFalseGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpConstantTrue %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantFalseBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpConstantFalse %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantFalse Result Type <id> '1[%void]' is not a boolean " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpConstant !1 !0)"; |
| // The expected failure code is implementation dependent (currently |
| // INVALID_BINARY because the binary parser catches these cases) and may |
| // change over time, but this must always fail. |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_BINARY, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeVectorGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpConstant %1 3.14 |
| %4 = OpConstantComposite %2 %3 %3 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeVectorWithUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpConstant %1 3.14 |
| %9 = OpUndef %1 |
| %4 = OpConstantComposite %2 %3 %3 %3 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeVectorResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpConstant %1 3.14 |
| %4 = OpConstantComposite %1 %3 %3 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantComposite Result Type <id> '1[%float]' is not a " |
| "composite type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeVectorConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %4 = OpTypeInt 32 0 |
| %3 = OpConstant %1 3.14 |
| %5 = OpConstant %4 42 ; bad type for constant value |
| %6 = OpConstantComposite %2 %3 %5 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '5[%uint_42]'s type " |
| "does not match Result Type <id> '2[%v4float]'s vector " |
| "element type.")); |
| } |
| TEST_F(ValidateIdWithMessage, |
| OpConstantCompositeVectorConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %4 = OpTypeInt 32 0 |
| %3 = OpConstant %1 3.14 |
| %5 = OpUndef %4 ; bad type for undef value |
| %6 = OpConstantComposite %2 %3 %5 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '5[%5]'s type does not " |
| "match Result Type <id> '2[%v4float]'s vector element type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeMatrixGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpConstant %1 0.0 |
| %6 = OpConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpConstantComposite %2 %5 %5 %5 %4 |
| %10 = OpConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeMatrixUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpConstant %1 0.0 |
| %6 = OpConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpUndef %2 |
| %10 = OpConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeMatrixConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %11 = OpTypeVector %1 3 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpConstant %1 0.0 |
| %6 = OpConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpConstantComposite %11 %5 %5 %5 |
| %10 = OpConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '10[%10]' vector " |
| "component count does not match Result Type <id> " |
| "'4[%mat4v4float]'s vector component count.")); |
| } |
| TEST_F(ValidateIdWithMessage, |
| OpConstantCompositeMatrixConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %11 = OpTypeVector %1 3 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpConstant %1 0.0 |
| %6 = OpConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpUndef %11 |
| %10 = OpConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '10[%10]' vector " |
| "component count does not match Result Type <id> " |
| "'4[%mat4v4float]'s vector component count.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpConstantComposite %3 %2 %2 %2 %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayWithUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %9 = OpUndef %1 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpConstantComposite %3 %2 %2 %2 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayConstConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpConstantComposite %3 %2 %2 %2 %1)"; // Uses a type as operand |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("Operand 1[%uint] cannot be a " |
| "type")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayConstConstituentBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpTypePointer Uniform %1 |
| %5 = OpVariable %4 Uniform |
| %6 = OpConstantComposite %3 %2 %2 %2 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '5[%5]' is not a " |
| "constant or undef.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpConstant %5 3.14 ; bad type for const value |
| %4 = OpConstantComposite %3 %2 %2 %2 %6)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> " |
| "'5[%float_3_1400001]'s type does not match Result " |
| "Type <id> '3[%_arr_uint_uint_4]'s array element " |
| "type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeArrayConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpUndef %5 ; bad type for undef |
| %4 = OpConstantComposite %3 %2 %2 %2 %6)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> " |
| "'5[%5]'s type does not match Result " |
| "Type <id> '3[%_arr_uint_uint_4]'s array element " |
| "type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeStructGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpConstant %2 4300000000 |
| %6 = OpConstantComposite %3 %4 %4 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeStructUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpUndef %2 |
| %6 = OpConstantComposite %3 %4 %4 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeStructMemberTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpConstant %2 4300000000 |
| %6 = OpConstantComposite %3 %4 %5 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> " |
| "'5[%ulong_4300000000]' type does not match the " |
| "Result Type <id> '3[%_struct_3]'s member type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantCompositeStructMemberUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpUndef %2 |
| %6 = OpConstantComposite %3 %4 %5 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantComposite Constituent <id> '5[%5]' type " |
| "does not match the Result Type <id> '3[%_struct_3]'s " |
| "member type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantSamplerGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %float = OpTypeFloat 32 |
| %samplerType = OpTypeSampler |
| %3 = OpConstantSampler %samplerType ClampToEdge 0 Nearest)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpConstantSamplerResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpConstantSampler %1 Clamp 0 Nearest)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "OpConstantSampler Result Type <id> '1[%float]' is not a sampler " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantNullGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpConstantNull %1 |
| %3 = OpTypeInt 32 0 |
| %4 = OpConstantNull %3 |
| %5 = OpTypeFloat 32 |
| %6 = OpConstantNull %5 |
| %7 = OpTypePointer UniformConstant %3 |
| %8 = OpConstantNull %7 |
| %9 = OpTypeEvent |
| %10 = OpConstantNull %9 |
| %11 = OpTypeDeviceEvent |
| %12 = OpConstantNull %11 |
| %13 = OpTypeReserveId |
| %14 = OpConstantNull %13 |
| %15 = OpTypeQueue |
| %16 = OpConstantNull %15 |
| %17 = OpTypeVector %5 2 |
| %18 = OpConstantNull %17 |
| %19 = OpTypeMatrix %17 2 |
| %20 = OpConstantNull %19 |
| %25 = OpConstant %3 8 |
| %21 = OpTypeArray %3 %25 |
| %22 = OpConstantNull %21 |
| %23 = OpTypeStruct %3 %5 %1 |
| %24 = OpConstantNull %23 |
| %26 = OpTypeArray %17 %25 |
| %27 = OpConstantNull %26 |
| %28 = OpTypeStruct %7 %26 %26 %1 |
| %29 = OpConstantNull %28 |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantNullBasicBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpConstantNull %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpConstantNull Result Type <id> '1[%void]' cannot have a null " |
| "value.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantNullArrayBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeSampler |
| %4 = OpConstant %2 4 |
| %5 = OpTypeArray %3 %4 |
| %6 = OpConstantNull %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "OpConstantNull Result Type <id> '4[%_arr_2_uint_4]' cannot have a " |
| "null value.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantNullStructBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %2 = OpTypeSampler |
| %3 = OpTypeStruct %2 %2 |
| %4 = OpConstantNull %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpConstantNull Result Type <id> '2[%_struct_2]' " |
| "cannot have a null value.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpConstantNullRuntimeArrayBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %bool = OpTypeBool |
| %array = OpTypeRuntimeArray %bool |
| %null = OpConstantNull %array)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "OpConstantNull Result Type <id> '2[%_runtimearr_bool]' cannot have " |
| "a null value.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpSpecConstantTrueGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpSpecConstantTrue %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpSpecConstantTrueBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpSpecConstantTrue %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Specialization constant must be a boolean type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpSpecConstantFalseGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeBool |
| %2 = OpSpecConstantFalse %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpSpecConstantFalseBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpSpecConstantFalse %1)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Specialization constant must be a boolean type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpSpecConstantGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpSpecConstant %1 42)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpSpecConstantBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpSpecConstant !1 !4)"; |
| // The expected failure code is implementation dependent (currently |
| // INVALID_BINARY because the binary parser catches these cases) and may |
| // change over time, but this must always fail. |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_BINARY, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Type Id 1 is not a scalar numeric type")); |
| } |
| |
| // Valid: SpecConstantComposite specializes to a vector. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeVectorGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpSpecConstant %1 3.14 |
| %4 = OpConstant %1 3.14 |
| %5 = OpSpecConstantComposite %2 %3 %3 %4 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Valid: Vector of floats and Undefs. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeVectorWithUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpSpecConstant %1 3.14 |
| %5 = OpConstant %1 3.14 |
| %9 = OpUndef %1 |
| %4 = OpSpecConstantComposite %2 %3 %5 %3 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: result type is float. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeVectorResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpSpecConstant %1 3.14 |
| %4 = OpSpecConstantComposite %1 %3 %3 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("is not a composite type")); |
| } |
| |
| // Invalid: Vector contains a mix of Int and Float. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeVectorConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %4 = OpTypeInt 32 0 |
| %3 = OpSpecConstant %1 3.14 |
| %5 = OpConstant %4 42 ; bad type for constant value |
| %6 = OpSpecConstantComposite %2 %3 %5 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> " |
| "'5[%uint_42]'s type does not match Result Type <id> " |
| "'2[%v4float]'s vector element type.")); |
| } |
| |
| // Invalid: Constituent is not a constant |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeVectorConstituentNotConstantBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeInt 32 0 |
| %4 = OpSpecConstant %1 3.14 |
| %5 = OpTypePointer Uniform %1 |
| %6 = OpVariable %5 Uniform |
| %7 = OpSpecConstantComposite %2 %6 %4 %4 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '6[%6]' is " |
| "not a constant or undef.")); |
| } |
| |
| // Invalid: Vector contains a mix of Undef-int and Float. |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeVectorConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %4 = OpTypeInt 32 0 |
| %3 = OpSpecConstant %1 3.14 |
| %5 = OpUndef %4 ; bad type for undef value |
| %6 = OpSpecConstantComposite %2 %3 %5 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]'s " |
| "type does not match Result Type <id> '2[%v4float]'s " |
| "vector element type.")); |
| } |
| |
| // Invalid: Vector expects 3 components, but 4 specified. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeVectorNumComponentsBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 3 |
| %3 = OpConstant %1 3.14 |
| %5 = OpSpecConstant %1 4.0 |
| %6 = OpSpecConstantComposite %2 %3 %5 %3 %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> count does " |
| "not match Result Type <id> '2[%v3float]'s vector " |
| "component count.")); |
| } |
| |
| // Valid: 4x4 matrix of floats |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpSpecConstant %1 0.0 |
| %6 = OpSpecConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpSpecConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpSpecConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpSpecConstantComposite %2 %5 %5 %5 %4 |
| %10 = OpSpecConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Valid: Matrix in which one column is Undef |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpConstant %1 1.0 |
| %5 = OpSpecConstant %1 0.0 |
| %6 = OpSpecConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpSpecConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpSpecConstantComposite %2 %5 %5 %4 %5 |
| %9 = OpUndef %2 |
| %10 = OpSpecConstantComposite %3 %6 %7 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: Matrix in which the sizes of column vectors are not equal. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeVector %1 3 |
| %4 = OpTypeMatrix %2 4 |
| %5 = OpSpecConstant %1 1.0 |
| %6 = OpConstant %1 0.0 |
| %7 = OpSpecConstantComposite %2 %5 %6 %6 %6 |
| %8 = OpSpecConstantComposite %2 %6 %5 %6 %6 |
| %9 = OpSpecConstantComposite %2 %6 %6 %5 %6 |
| %10 = OpSpecConstantComposite %3 %6 %6 %6 |
| %11 = OpSpecConstantComposite %4 %7 %8 %9 %10)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '10[%10]' " |
| "vector component count does not match Result Type " |
| "<id> '4[%mat4v4float]'s vector component count.")); |
| } |
| |
| // Invalid: Matrix type expects 4 columns but only 3 specified. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixNumColsBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeMatrix %2 4 |
| %4 = OpSpecConstant %1 1.0 |
| %5 = OpConstant %1 0.0 |
| %6 = OpSpecConstantComposite %2 %4 %5 %5 %5 |
| %7 = OpSpecConstantComposite %2 %5 %4 %5 %5 |
| %8 = OpSpecConstantComposite %2 %5 %5 %4 %5 |
| %10 = OpSpecConstantComposite %3 %6 %7 %8)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> count does " |
| "not match Result Type <id> '3[%mat4v4float]'s matrix column " |
| "count.")); |
| } |
| |
| // Invalid: Composite contains a non-const/undef component |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeMatrixConstituentNotConstBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpConstant %1 0.0 |
| %3 = OpTypeVector %1 4 |
| %4 = OpTypeMatrix %3 4 |
| %5 = OpSpecConstantComposite %3 %2 %2 %2 %2 |
| %6 = OpTypePointer Uniform %1 |
| %7 = OpVariable %6 Uniform |
| %8 = OpSpecConstantComposite %4 %5 %5 %5 %7)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '7[%7]' is " |
| "not a constant or undef.")); |
| } |
| |
| // Invalid: Composite contains a column that is *not* a vector (it's an array) |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixColTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeInt 32 0 |
| %3 = OpSpecConstant %2 4 |
| %4 = OpConstant %1 0.0 |
| %5 = OpTypeVector %1 4 |
| %6 = OpTypeArray %2 %3 |
| %7 = OpTypeMatrix %5 4 |
| %8 = OpSpecConstantComposite %6 %3 %3 %3 %3 |
| %9 = OpSpecConstantComposite %5 %4 %4 %4 %4 |
| %10 = OpSpecConstantComposite %7 %9 %9 %9 %8)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '8[%8]' type " |
| "does not match Result Type <id> '7[%mat4v4float]'s " |
| "matrix column type.")); |
| } |
| |
| // Invalid: Matrix with an Undef column of the wrong size. |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeMatrixConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeVector %1 4 |
| %3 = OpTypeVector %1 3 |
| %4 = OpTypeMatrix %2 4 |
| %5 = OpSpecConstant %1 1.0 |
| %6 = OpSpecConstant %1 0.0 |
| %7 = OpSpecConstantComposite %2 %5 %6 %6 %6 |
| %8 = OpSpecConstantComposite %2 %6 %5 %6 %6 |
| %9 = OpSpecConstantComposite %2 %6 %6 %5 %6 |
| %10 = OpUndef %3 |
| %11 = OpSpecConstantComposite %4 %7 %8 %9 %10)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '10[%10]' " |
| "vector component count does not match Result Type " |
| "<id> '4[%mat4v4float]'s vector component count.")); |
| } |
| |
| // Invalid: Matrix in which some columns are Int and some are Float. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeMatrixColumnTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeFloat 32 |
| %3 = OpTypeVector %1 2 |
| %4 = OpTypeVector %2 2 |
| %5 = OpTypeMatrix %4 2 |
| %6 = OpSpecConstant %1 42 |
| %7 = OpConstant %2 3.14 |
| %8 = OpSpecConstantComposite %3 %6 %6 |
| %9 = OpSpecConstantComposite %4 %7 %7 |
| %10 = OpSpecConstantComposite %5 %8 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '8[%8]' " |
| "component type does not match Result Type <id> " |
| "'5[%mat2v2float]'s matrix column component type.")); |
| } |
| |
| // Valid: Array of integers |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeArrayGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpSpecConstant %1 4 |
| %5 = OpConstant %1 5 |
| %3 = OpTypeArray %1 %2 |
| %6 = OpTypeArray %1 %5 |
| %4 = OpSpecConstantComposite %3 %2 %2 %2 %2 |
| %7 = OpSpecConstantComposite %3 %5 %5 %5 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: Expecting an array of 4 components, but 3 specified. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeArrayNumComponentsBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpSpecConstantComposite %3 %2 %2 %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent count does not " |
| "match Result Type <id> '3[%_arr_uint_uint_4]'s array " |
| "length.")); |
| } |
| |
| // Valid: Array of Integers and Undef-int |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeArrayWithUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpSpecConstant %1 4 |
| %9 = OpUndef %1 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpSpecConstantComposite %3 %2 %2 %2 %9)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: Array uses a type as operand. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeArrayConstConstituentBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpTypePointer Uniform %1 |
| %5 = OpVariable %4 Uniform |
| %6 = OpSpecConstantComposite %3 %2 %2 %2 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]' is " |
| "not a constant or undef.")); |
| } |
| |
| // Invalid: Array has a mix of Int and Float components. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeArrayConstituentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %4 = OpTypeFloat 32 |
| %5 = OpSpecConstant %4 3.14 ; bad type for const value |
| %6 = OpSpecConstantComposite %3 %2 %2 %2 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]'s " |
| "type does not match Result Type <id> " |
| "'3[%_arr_uint_uint_4]'s array element type.")); |
| } |
| |
| // Invalid: Array has a mix of Int and Undef-float. |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeArrayConstituentUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpSpecConstant %1 4 |
| %3 = OpTypeArray %1 %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpUndef %5 ; bad type for undef |
| %4 = OpSpecConstantComposite %3 %2 %2 %2 %6)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]'s " |
| "type does not match Result Type <id> " |
| "'3[%_arr_uint_2]'s array element type.")); |
| } |
| |
| // Valid: Struct of {Int32,Int32,Int64}. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeStructGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpSpecConstant %2 4300000000 |
| %6 = OpSpecConstantComposite %3 %4 %4 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: missing one int32 struct member. |
| TEST_F(ValidateIdWithMessage, |
| OpSpecConstantCompositeStructMissingComponentBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %3 = OpTypeStruct %1 %1 %1 |
| %4 = OpConstant %1 42 |
| %5 = OpSpecConstant %1 430 |
| %6 = OpSpecConstantComposite %3 %4 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> " |
| "'2[%_struct_2]' count does not match Result Type " |
| "<id> '2[%_struct_2]'s struct member count.")); |
| } |
| |
| // Valid: Struct uses Undef-int64. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeStructUndefGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpSpecConstant %1 42 |
| %5 = OpUndef %2 |
| %6 = OpSpecConstantComposite %3 %4 %4 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: Composite contains non-const/undef component. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeStructNonConstBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpSpecConstant %1 42 |
| %5 = OpUndef %2 |
| %6 = OpTypePointer Uniform %1 |
| %7 = OpVariable %6 Uniform |
| %8 = OpSpecConstantComposite %3 %4 %7 %5)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '7[%7]' is " |
| "not a constant or undef.")); |
| } |
| |
| // Invalid: Struct component type does not match expected specialization type. |
| // Second component was expected to be Int32, but got Int64. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeStructMemberTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpConstant %1 42 |
| %5 = OpSpecConstant %2 4300000000 |
| %6 = OpSpecConstantComposite %3 %4 %5 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]' type " |
| "does not match the Result Type <id> '3[%_struct_3]'s " |
| "member type.")); |
| } |
| |
| // Invalid: Undef-int64 used when Int32 was expected. |
| TEST_F(ValidateIdWithMessage, OpSpecConstantCompositeStructMemberUndefTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeInt 64 0 |
| %3 = OpTypeStruct %1 %1 %2 |
| %4 = OpSpecConstant %1 42 |
| %5 = OpUndef %2 |
| %6 = OpSpecConstantComposite %3 %4 %5 %4)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpSpecConstantComposite Constituent <id> '5[%5]' type " |
| "does not match the Result Type <id> '3[%_struct_3]'s " |
| "member type.")); |
| } |
| |
| // TODO: OpSpecConstantOp |
| |
| TEST_F(ValidateIdWithMessage, OpVariableGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer Input %1 |
| %3 = OpVariable %2 Input)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpVariableInitializerConstantGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer Input %1 |
| %3 = OpConstant %1 42 |
| %4 = OpVariable %2 Input %3)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpVariableInitializerGlobalVariableGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer Uniform %1 |
| %3 = OpVariable %2 Uniform |
| %4 = OpTypePointer Private %2 ; pointer to pointer |
| %5 = OpVariable %4 Private %3 |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| // TODO: Positive test OpVariable with OpConstantNull of OpTypePointer |
| TEST_F(ValidateIdWithMessage, OpVariableResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpVariable %1 Input)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpVariable Result Type <id> '1[%uint]' is not a pointer " |
| "type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpVariableInitializerIsTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypePointer Input %1 |
| %3 = OpVariable %2 Input %2)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("Operand 2[%_ptr_Input_uint] " |
| "cannot be a type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableInitializerIsFunctionVarBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ptrint = OpTypePointer Function %int |
| %ptrptrint = OpTypePointer Function %ptrint |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %var = OpVariable %ptrint Function |
| %varinit = OpVariable %ptrptrint Function %var ; Can't initialize function variable. |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpVariable Initializer <id> '8[%8]' is not a constant " |
| "or module-scope variable")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableInitializerIsModuleVarGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ptrint = OpTypePointer Uniform %int |
| %mvar = OpVariable %ptrint Uniform |
| %ptrptrint = OpTypePointer Function %ptrint |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %goodvar = OpVariable %ptrptrint Function %mvar ; This is ok |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableContainsBoolBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %bool = OpTypeBool |
| %int = OpTypeInt 32 0 |
| %block = OpTypeStruct %bool %int |
| %_ptr_Uniform_block = OpTypePointer Uniform %block |
| %var = OpVariable %_ptr_Uniform_block Uniform |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %load = OpLoad %block %var |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("If OpTypeBool is stored in conjunction with OpVariable" |
| ", it can only be used with non-externally visible " |
| "shader Storage Classes: Workgroup, CrossWorkgroup, " |
| "Private, and Function")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableContainsBoolPointerGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %bool = OpTypeBool |
| %boolptr = OpTypePointer Uniform %bool |
| %int = OpTypeInt 32 0 |
| %block = OpTypeStruct %boolptr %int |
| %_ptr_Uniform_block = OpTypePointer Uniform %block |
| %var = OpVariable %_ptr_Uniform_block Uniform |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %load = OpLoad %block %var |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableContainsBuiltinBoolGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %input 0 BuiltIn FrontFacing |
| %bool = OpTypeBool |
| %input = OpTypeStruct %bool |
| %_ptr_input = OpTypePointer Input %input |
| %var = OpVariable %_ptr_input Input |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %load = OpLoad %input %var |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariableContainsRayPayloadBoolGood) { |
| std::string spirv = R"( |
| OpCapability RayTracingNV |
| OpCapability Shader |
| OpCapability Linkage |
| OpExtension "SPV_NV_ray_tracing" |
| OpMemoryModel Logical GLSL450 |
| %bool = OpTypeBool |
| %PerRayData = OpTypeStruct %bool |
| %_ptr_PerRayData = OpTypePointer RayPayloadNV %PerRayData |
| %var = OpVariable %_ptr_PerRayData RayPayloadNV |
| %void = OpTypeVoid |
| %fnty = OpTypeFunction %void |
| %main = OpFunction %void None %fnty |
| %entry = OpLabel |
| %load = OpLoad %PerRayData %var |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariablePointerNoVariablePointersBad) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %_ptr_workgroup_int = OpTypePointer Workgroup %int |
| %_ptr_function_ptr = OpTypePointer Function %_ptr_workgroup_int |
| %voidfn = OpTypeFunction %void |
| %func = OpFunction %void None %voidfn |
| %entry = OpLabel |
| %var = OpVariable %_ptr_function_ptr Function |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "In Logical addressing, variables may not allocate a pointer type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| OpVariablePointerNoVariablePointersRelaxedLogicalGood) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %_ptr_workgroup_int = OpTypePointer Workgroup %int |
| %_ptr_function_ptr = OpTypePointer Function %_ptr_workgroup_int |
| %voidfn = OpTypeFunction %void |
| %func = OpFunction %void None %voidfn |
| %entry = OpLabel |
| %var = OpVariable %_ptr_function_ptr Function |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| auto options = getValidatorOptions(); |
| options->relax_logical_pointer = true; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpFunctionWithNonMemoryObject) { |
| // DXC generates code that looks like when given something like: |
| // T t; |
| // t.s.fn_1(); |
| // This needs to be accepted before legalization takes place, so we |
| // will include it with the relaxed logical pointer. |
| |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Vertex %1 "main" |
| OpSource HLSL 600 |
| %int = OpTypeInt 32 1 |
| %int_0 = OpConstant %int 0 |
| %void = OpTypeVoid |
| %9 = OpTypeFunction %void |
| %_struct_5 = OpTypeStruct |
| %_struct_6 = OpTypeStruct %_struct_5 |
| %_ptr_Function__struct_6 = OpTypePointer Function %_struct_6 |
| %_ptr_Function__struct_5 = OpTypePointer Function %_struct_5 |
| %23 = OpTypeFunction %void %_ptr_Function__struct_5 |
| %1 = OpFunction %void None %9 |
| %10 = OpLabel |
| %11 = OpVariable %_ptr_Function__struct_6 Function |
| %20 = OpAccessChain %_ptr_Function__struct_5 %11 %int_0 |
| %21 = OpFunctionCall %void %12 %20 |
| OpReturn |
| OpFunctionEnd |
| %12 = OpFunction %void None %23 |
| %13 = OpFunctionParameter %_ptr_Function__struct_5 |
| %14 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| auto options = getValidatorOptions(); |
| options->relax_logical_pointer = true; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| OpVariablePointerVariablePointersStorageBufferGood) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VariablePointersStorageBuffer |
| OpExtension "SPV_KHR_variable_pointers" |
| OpMemoryModel Logical GLSL450 |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %_ptr_workgroup_int = OpTypePointer Workgroup %int |
| %_ptr_function_ptr = OpTypePointer Function %_ptr_workgroup_int |
| %voidfn = OpTypeFunction %void |
| %func = OpFunction %void None %voidfn |
| %entry = OpLabel |
| %var = OpVariable %_ptr_function_ptr Function |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariablePointerVariablePointersGood) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VariablePointers |
| OpExtension "SPV_KHR_variable_pointers" |
| OpMemoryModel Logical GLSL450 |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %_ptr_workgroup_int = OpTypePointer Workgroup %int |
| %_ptr_function_ptr = OpTypePointer Function %_ptr_workgroup_int |
| %voidfn = OpTypeFunction %void |
| %func = OpFunction %void None %voidfn |
| %entry = OpLabel |
| %var = OpVariable %_ptr_function_ptr Function |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVariablePointerVariablePointersBad) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VariablePointers |
| OpExtension "SPV_KHR_variable_pointers" |
| OpMemoryModel Logical GLSL450 |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %_ptr_workgroup_int = OpTypePointer Workgroup %int |
| %_ptr_uniform_ptr = OpTypePointer Uniform %_ptr_workgroup_int |
| %var = OpVariable %_ptr_uniform_ptr Uniform |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("In Logical addressing with variable pointers, " |
| "variables that allocate pointers must be in Function " |
| "or Private storage classes")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLoadGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpVariable %3 UniformConstant |
| %6 = OpFunction %1 None %4 |
| %7 = OpLabel |
| %8 = OpLoad %2 %5 |
| %9 = OpReturn |
| %10 = OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // TODO: Add tests that exercise VariablePointersStorageBuffer instead of |
| // VariablePointers. |
| void createVariablePointerSpirvProgram(std::ostringstream* spirv, |
| std::string result_strategy, |
| bool use_varptr_cap, |
| bool add_helper_function) { |
| *spirv << "OpCapability Shader "; |
| if (use_varptr_cap) { |
| *spirv << "OpCapability VariablePointers "; |
| *spirv << "OpExtension \"SPV_KHR_variable_pointers\" "; |
| } |
| *spirv << "OpExtension \"SPV_KHR_storage_buffer_storage_class\" "; |
| *spirv << R"( |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %main "main" |
| %void = OpTypeVoid |
| %voidf = OpTypeFunction %void |
| %bool = OpTypeBool |
| %i32 = OpTypeInt 32 1 |
| %f32 = OpTypeFloat 32 |
| %f32ptr = OpTypePointer StorageBuffer %f32 |
| %i = OpConstant %i32 1 |
| %zero = OpConstant %i32 0 |
| %float_1 = OpConstant %f32 1.0 |
| %ptr1 = OpVariable %f32ptr StorageBuffer |
| %ptr2 = OpVariable %f32ptr StorageBuffer |
| )"; |
| if (add_helper_function) { |
| *spirv << R"( |
| ; //////////////////////////////////////////////////////////// |
| ;;;; Function that returns a pointer |
| ; //////////////////////////////////////////////////////////// |
| %selector_func_type = OpTypeFunction %f32ptr %bool %f32ptr %f32ptr |
| %choose_input_func = OpFunction %f32ptr None %selector_func_type |
| %is_neg_param = OpFunctionParameter %bool |
| %first_ptr_param = OpFunctionParameter %f32ptr |
| %second_ptr_param = OpFunctionParameter %f32ptr |
| %selector_func_begin = OpLabel |
| %result_ptr = OpSelect %f32ptr %is_neg_param %first_ptr_param %second_ptr_param |
| OpReturnValue %result_ptr |
| OpFunctionEnd |
| )"; |
| } |
| *spirv << R"( |
| %main = OpFunction %void None %voidf |
| %label = OpLabel |
| )"; |
| *spirv << result_strategy; |
| *spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| } |
| |
| // With the VariablePointer Capability, OpLoad should allow loading a |
| // VaiablePointer. In this test the variable pointer is obtained by an OpSelect |
| TEST_F(ValidateIdWithMessage, OpLoadVarPtrOpSelectGood) { |
| std::string result_strategy = R"( |
| %isneg = OpSLessThan %bool %i %zero |
| %varptr = OpSelect %f32ptr %isneg %ptr1 %ptr2 |
| %result = OpLoad %f32 %varptr |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| true /* Add VariablePointers Capability? */, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Without the VariablePointers Capability, OpLoad will not allow loading |
| // through a variable pointer. |
| // Disabled since using OpSelect with pointers without VariablePointers will |
| // fail LogicalsPass. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpLoadVarPtrOpSelectBad) { |
| std::string result_strategy = R"( |
| %isneg = OpSLessThan %bool %i %zero |
| %varptr = OpSelect %f32ptr %isneg %ptr1 %ptr2 |
| %result = OpLoad %f32 %varptr |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| false /* Add VariablePointers Capability?*/, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("is not a logical pointer.")); |
| } |
| |
| // With the VariablePointer Capability, OpLoad should allow loading a |
| // VaiablePointer. In this test the variable pointer is obtained by an OpPhi |
| TEST_F(ValidateIdWithMessage, OpLoadVarPtrOpPhiGood) { |
| std::string result_strategy = R"( |
| %is_neg = OpSLessThan %bool %i %zero |
| OpSelectionMerge %end_label None |
| OpBranchConditional %is_neg %take_ptr_1 %take_ptr_2 |
| %take_ptr_1 = OpLabel |
| OpBranch %end_label |
| %take_ptr_2 = OpLabel |
| OpBranch %end_label |
| %end_label = OpLabel |
| %varptr = OpPhi %f32ptr %ptr1 %take_ptr_1 %ptr2 %take_ptr_2 |
| %result = OpLoad %f32 %varptr |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| true /* Add VariablePointers Capability?*/, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Without the VariablePointers Capability, OpPhi can have a pointer result |
| // type. |
| TEST_F(ValidateIdWithMessage, OpPhiBad) { |
| std::string result_strategy = R"( |
| %is_neg = OpSLessThan %bool %i %zero |
| OpSelectionMerge %end_label None |
| OpBranchConditional %is_neg %take_ptr_1 %take_ptr_2 |
| %take_ptr_1 = OpLabel |
| OpBranch %end_label |
| %take_ptr_2 = OpLabel |
| OpBranch %end_label |
| %end_label = OpLabel |
| %varptr = OpPhi %f32ptr %ptr1 %take_ptr_1 %ptr2 %take_ptr_2 |
| %result = OpLoad %f32 %varptr |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| false /* Add VariablePointers Capability?*/, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Using pointers with OpPhi requires capability " |
| "VariablePointers or VariablePointersStorageBuffer")); |
| } |
| |
| // With the VariablePointer Capability, OpLoad should allow loading through a |
| // VaiablePointer. In this test the variable pointer is obtained from an |
| // OpFunctionCall (return value from a function) |
| TEST_F(ValidateIdWithMessage, OpLoadVarPtrOpFunctionCallGood) { |
| std::ostringstream spirv; |
| std::string result_strategy = R"( |
| %isneg = OpSLessThan %bool %i %zero |
| %varptr = OpFunctionCall %f32ptr %choose_input_func %isneg %ptr1 %ptr2 |
| %result = OpLoad %f32 %varptr |
| )"; |
| |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| true /* Add VariablePointers Capability?*/, |
| true /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLoadResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpVariable %3 UniformConstant |
| %6 = OpFunction %1 None %4 |
| %7 = OpLabel |
| %8 = OpLoad %3 %5 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpLoad Result Type <id> " |
| "'3[%_ptr_UniformConstant_uint]' does not match " |
| "Pointer <id> '5[%5]'s type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLoadPointerBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpFunction %1 None %4 |
| %6 = OpLabel |
| %7 = OpLoad %2 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| // Prove that SSA checks trigger for a bad Id value. |
| // The next test case show the not-a-logical-pointer case. |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("ID 8[%8] has not been " |
| "defined")); |
| } |
| |
| // Disabled as bitcasting type to object is now not valid. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpLoadLogicalPointerBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypePointer UniformConstant %2 |
| %5 = OpTypePointer UniformConstant %3 |
| %6 = OpTypeFunction %1 |
| %7 = OpFunction %1 None %6 |
| %8 = OpLabel |
| %9 = OpBitcast %5 %4 ; Not valid in logical addressing |
| %10 = OpLoad %3 %9 ; Should trigger message |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| // Once we start checking bitcasts, we might catch that |
| // as the error first, instead of catching it here. |
| // I don't know if it's possible to generate a bad case |
| // if/when the validator is complete. |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpLoad Pointer <id> '9' is not a logical pointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 |
| %6 = OpVariable %3 Uniform |
| %7 = OpFunction %1 None %4 |
| %8 = OpLabel |
| OpStore %6 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpStorePointerBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 |
| %6 = OpVariable %3 UniformConstant |
| %7 = OpConstant %2 0 |
| %8 = OpFunction %1 None %4 |
| %9 = OpLabel |
| OpStore %7 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '7[%uint_0]' is not a logical " |
| "pointer.")); |
| } |
| |
| // Disabled as bitcasting type to object is now not valid. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpStoreLogicalPointerBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypePointer UniformConstant %2 |
| %5 = OpTypePointer UniformConstant %3 |
| %6 = OpTypeFunction %1 |
| %7 = OpConstantNull %5 |
| %8 = OpFunction %1 None %6 |
| %9 = OpLabel |
| %10 = OpBitcast %5 %4 ; Not valid in logical addressing |
| %11 = OpStore %10 %7 ; Should trigger message |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '10' is not a logical pointer.")); |
| } |
| |
| // Without the VariablePointer Capability, OpStore should may not store |
| // through a variable pointer. |
| // Disabled since using OpSelect with pointers without VariablePointers will |
| // fail LogicalsPass. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpStoreVarPtrBad) { |
| std::string result_strategy = R"( |
| %isneg = OpSLessThan %bool %i %zero |
| %varptr = OpSelect %f32ptr %isneg %ptr1 %ptr2 |
| OpStore %varptr %float_1 |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram( |
| &spirv, result_strategy, false /* Add VariablePointers Capability? */, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("is not a logical pointer.")); |
| } |
| |
| // With the VariablePointer Capability, OpStore should allow storing through a |
| // variable pointer. |
| TEST_F(ValidateIdWithMessage, OpStoreVarPtrGood) { |
| std::string result_strategy = R"( |
| %isneg = OpSLessThan %bool %i %zero |
| %varptr = OpSelect %f32ptr %isneg %ptr1 %ptr2 |
| OpStore %varptr %float_1 |
| )"; |
| |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, result_strategy, |
| true /* Add VariablePointers Capability? */, |
| false /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreObjectGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 |
| %6 = OpVariable %3 Uniform |
| %7 = OpFunction %1 None %4 |
| %8 = OpLabel |
| %9 = OpUndef %1 |
| OpStore %6 %9 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Object <id> '9[%9]'s type is void.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpStoreTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %9 = OpTypeFloat 32 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %9 3.14 |
| %6 = OpVariable %3 Uniform |
| %7 = OpFunction %1 None %4 |
| %8 = OpLabel |
| OpStore %6 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '7[%7]'s type does not match " |
| "Object <id> '6[%float_3_1400001]'s type.")); |
| } |
| |
| // The next series of test check test a relaxation of the rules for stores to |
| // structs. The first test checks that we get a failure when the option is not |
| // set to relax the rule. |
| // TODO: Add tests for layout compatible arrays and matricies when the validator |
| // relaxes the rules for them as well. Also need test to check for layout |
| // decorations specific to those types. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeBadStruct) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 0 |
| OpMemberDecorate %1 1 Offset 4 |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 4 |
| %3 = OpTypeVoid |
| %4 = OpTypeFloat 32 |
| %1 = OpTypeStruct %4 %4 |
| %5 = OpTypePointer Uniform %1 |
| %2 = OpTypeStruct %4 %4 |
| %6 = OpTypeFunction %3 |
| %7 = OpConstant %4 3.14 |
| %8 = OpVariable %5 Uniform |
| %9 = OpFunction %3 None %6 |
| %10 = OpLabel |
| %11 = OpCompositeConstruct %2 %7 %7 |
| OpStore %8 %11 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '8[%8]'s type does not match " |
| "Object <id> '11[%11]'s type.")); |
| } |
| |
| // Same code as the last test. The difference is that we relax the rule. |
| // Because the structs %3 and %5 are defined the same way. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeRelaxedStruct) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 0 |
| OpMemberDecorate %1 1 Offset 4 |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 4 |
| %3 = OpTypeVoid |
| %4 = OpTypeFloat 32 |
| %1 = OpTypeStruct %4 %4 |
| %5 = OpTypePointer Uniform %1 |
| %2 = OpTypeStruct %4 %4 |
| %6 = OpTypeFunction %3 |
| %7 = OpConstant %4 3.14 |
| %8 = OpVariable %5 Uniform |
| %9 = OpFunction %3 None %6 |
| %10 = OpLabel |
| %11 = OpCompositeConstruct %2 %7 %7 |
| OpStore %8 %11 |
| OpReturn |
| OpFunctionEnd)"; |
| spvValidatorOptionsSetRelaxStoreStruct(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Same code as the last test excect for an extra decoration on one of the |
| // members. With the relaxed rules, the code is still valid. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeRelaxedStructWithExtraDecoration) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 0 |
| OpMemberDecorate %1 1 Offset 4 |
| OpMemberDecorate %1 0 RelaxedPrecision |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 4 |
| %3 = OpTypeVoid |
| %4 = OpTypeFloat 32 |
| %1 = OpTypeStruct %4 %4 |
| %5 = OpTypePointer Uniform %1 |
| %2 = OpTypeStruct %4 %4 |
| %6 = OpTypeFunction %3 |
| %7 = OpConstant %4 3.14 |
| %8 = OpVariable %5 Uniform |
| %9 = OpFunction %3 None %6 |
| %10 = OpLabel |
| %11 = OpCompositeConstruct %2 %7 %7 |
| OpStore %8 %11 |
| OpReturn |
| OpFunctionEnd)"; |
| spvValidatorOptionsSetRelaxStoreStruct(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // This test check that we recursively traverse the struct to check if they are |
| // interchangable. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeRelaxedNestedStruct) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 0 |
| OpMemberDecorate %1 1 Offset 4 |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 8 |
| OpMemberDecorate %3 0 Offset 0 |
| OpMemberDecorate %3 1 Offset 4 |
| OpMemberDecorate %4 0 Offset 0 |
| OpMemberDecorate %4 1 Offset 8 |
| %5 = OpTypeVoid |
| %6 = OpTypeInt 32 0 |
| %7 = OpTypeFloat 32 |
| %1 = OpTypeStruct %7 %6 |
| %2 = OpTypeStruct %1 %1 |
| %8 = OpTypePointer Uniform %2 |
| %3 = OpTypeStruct %7 %6 |
| %4 = OpTypeStruct %3 %3 |
| %9 = OpTypeFunction %5 |
| %10 = OpConstant %6 7 |
| %11 = OpConstant %7 3.14 |
| %12 = OpConstantComposite %3 %11 %10 |
| %13 = OpVariable %8 Uniform |
| %14 = OpFunction %5 None %9 |
| %15 = OpLabel |
| %16 = OpCompositeConstruct %4 %12 %12 |
| OpStore %13 %16 |
| OpReturn |
| OpFunctionEnd)"; |
| spvValidatorOptionsSetRelaxStoreStruct(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // This test check that the even with the relaxed rules an error is identified |
| // if the members of the struct are in a different order. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeBadRelaxedStruct1) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 0 |
| OpMemberDecorate %1 1 Offset 4 |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 8 |
| OpMemberDecorate %3 0 Offset 0 |
| OpMemberDecorate %3 1 Offset 4 |
| OpMemberDecorate %4 0 Offset 0 |
| OpMemberDecorate %4 1 Offset 8 |
| %5 = OpTypeVoid |
| %6 = OpTypeInt 32 0 |
| %7 = OpTypeFloat 32 |
| %1 = OpTypeStruct %6 %7 |
| %2 = OpTypeStruct %1 %1 |
| %8 = OpTypePointer Uniform %2 |
| %3 = OpTypeStruct %7 %6 |
| %4 = OpTypeStruct %3 %3 |
| %9 = OpTypeFunction %5 |
| %10 = OpConstant %6 7 |
| %11 = OpConstant %7 3.14 |
| %12 = OpConstantComposite %3 %11 %10 |
| %13 = OpVariable %8 Uniform |
| %14 = OpFunction %5 None %9 |
| %15 = OpLabel |
| %16 = OpCompositeConstruct %4 %12 %12 |
| OpStore %13 %16 |
| OpReturn |
| OpFunctionEnd)"; |
| spvValidatorOptionsSetRelaxStoreStruct(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '13[%13]'s layout does not match Object " |
| "<id> '16[%16]'s layout.")); |
| } |
| |
| // This test check that the even with the relaxed rules an error is identified |
| // if the members of the struct are at different offsets. |
| TEST_F(ValidateIdWithMessage, OpStoreTypeBadRelaxedStruct2) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpMemberDecorate %1 0 Offset 4 |
| OpMemberDecorate %1 1 Offset 0 |
| OpMemberDecorate %2 0 Offset 0 |
| OpMemberDecorate %2 1 Offset 8 |
| OpMemberDecorate %3 0 Offset 0 |
| OpMemberDecorate %3 1 Offset 4 |
| OpMemberDecorate %4 0 Offset 0 |
| OpMemberDecorate %4 1 Offset 8 |
| %5 = OpTypeVoid |
| %6 = OpTypeInt 32 0 |
| %7 = OpTypeFloat 32 |
| %1 = OpTypeStruct %7 %6 |
| %2 = OpTypeStruct %1 %1 |
| %8 = OpTypePointer Uniform %2 |
| %3 = OpTypeStruct %7 %6 |
| %4 = OpTypeStruct %3 %3 |
| %9 = OpTypeFunction %5 |
| %10 = OpConstant %6 7 |
| %11 = OpConstant %7 3.14 |
| %12 = OpConstantComposite %3 %11 %10 |
| %13 = OpVariable %8 Uniform |
| %14 = OpFunction %5 None %9 |
| %15 = OpLabel |
| %16 = OpCompositeConstruct %4 %12 %12 |
| OpStore %13 %16 |
| OpReturn |
| OpFunctionEnd)"; |
| spvValidatorOptionsSetRelaxStoreStruct(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpStore Pointer <id> '13[%13]'s layout does not match Object " |
| "<id> '16[%16]'s layout.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreTypeRelaxedLogicalPointerReturnPointer) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| %1 = OpTypeInt 32 1 |
| %2 = OpTypePointer Function %1 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpFunction %2 None %3 |
| %5 = OpFunctionParameter %2 |
| %6 = OpLabel |
| OpReturnValue %5 |
| OpFunctionEnd)"; |
| |
| spvValidatorOptionsSetRelaxLogicalPointer(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreTypeRelaxedLogicalPointerAllocPointer) { |
| const std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 1 |
| %3 = OpTypeFunction %1 ; void(void) |
| %4 = OpTypePointer Uniform %2 ; int* |
| %5 = OpTypePointer Private %4 ; int** (Private) |
| %6 = OpTypePointer Function %4 ; int** (Function) |
| %7 = OpVariable %5 Private |
| %8 = OpFunction %1 None %3 |
| %9 = OpLabel |
| %10 = OpVariable %6 Function |
| OpReturn |
| OpFunctionEnd)"; |
| |
| spvValidatorOptionsSetRelaxLogicalPointer(options_, true); |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreVoid) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 |
| %6 = OpVariable %3 Uniform |
| %7 = OpFunction %1 None %4 |
| %8 = OpLabel |
| %9 = OpFunctionCall %1 %7 |
| OpStore %6 %9 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpStore Object <id> '8[%8]'s type is void.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreLabel) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 |
| %6 = OpVariable %3 Uniform |
| %7 = OpFunction %1 None %4 |
| %8 = OpLabel |
| OpStore %6 %8 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Operand 7[%7] requires a type")); |
| } |
| |
| // TODO: enable when this bug is fixed: |
| // https://cvs.khronos.org/bugzilla/show_bug.cgi?id=15404 |
| TEST_F(ValidateIdWithMessage, DISABLED_OpStoreFunction) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypeFunction %2 |
| %5 = OpConstant %2 123 |
| %6 = OpVariable %3 UniformConstant |
| %7 = OpFunction %2 None %4 |
| %8 = OpLabel |
| OpStore %6 %7 |
| OpReturnValue %5 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpStoreBuiltin) { |
| std::string spirv = R"( |
| OpCapability Shader |
| %1 = OpExtInstImport "GLSL.std.450" |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %main "main" %gl_GlobalInvocationID |
| OpExecutionMode %main LocalSize 1 1 1 |
| OpSource GLSL 450 |
| OpName %main "main" |
| |
| OpName %gl_GlobalInvocationID "gl_GlobalInvocationID" |
| OpDecorate %gl_GlobalInvocationID BuiltIn GlobalInvocationId |
| |
| %int = OpTypeInt 32 1 |
| %uint = OpTypeInt 32 0 |
| %v3uint = OpTypeVector %uint 3 |
| %_ptr_Input_v3uint = OpTypePointer Input %v3uint |
| %gl_GlobalInvocationID = OpVariable %_ptr_Input_v3uint Input |
| |
| %zero = OpConstant %uint 0 |
| %v3uint_000 = OpConstantComposite %v3uint %zero %zero %zero |
| |
| %void = OpTypeVoid |
| %voidfunc = OpTypeFunction %void |
| %main = OpFunction %void None %voidfunc |
| %lmain = OpLabel |
| |
| OpStore %gl_GlobalInvocationID %v3uint_000 |
| |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("storage class is read-only")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpConstant %2 42 |
| %5 = OpVariable %3 UniformConstant %4 |
| %6 = OpTypePointer Function %2 |
| %7 = OpTypeFunction %1 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| %10 = OpVariable %6 Function |
| OpCopyMemory %10 %5 None |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryNonPointerTarget) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 %2 %3 |
| %5 = OpFunction %1 None %4 |
| %6 = OpFunctionParameter %2 |
| %7 = OpFunctionParameter %3 |
| %8 = OpLabel |
| OpCopyMemory %6 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Target operand <id> '6[%6]' is not a pointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryNonPointerSource) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpTypeFunction %1 %2 %3 |
| %5 = OpFunction %1 None %4 |
| %6 = OpFunctionParameter %2 |
| %7 = OpFunctionParameter %3 |
| %8 = OpLabel |
| OpCopyMemory %7 %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Source operand <id> '6[%6]' is not a pointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpConstant %2 42 |
| %5 = OpVariable %3 UniformConstant %4 |
| %11 = OpTypeFloat 32 |
| %6 = OpTypePointer Function %11 |
| %7 = OpTypeFunction %1 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| %10 = OpVariable %6 Function |
| OpCopyMemory %10 %5 None |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Target <id> '5[%5]'s type does not match " |
| "Source <id> '2[%uint]'s type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryVoidTarget) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %1 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFunction %1 %3 %4 |
| %6 = OpFunction %1 None %5 |
| %7 = OpFunctionParameter %3 |
| %8 = OpFunctionParameter %4 |
| %9 = OpLabel |
| OpCopyMemory %7 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Target operand <id> '7[%7]' cannot be a void " |
| "pointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemoryVoidSource) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %1 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFunction %1 %3 %4 |
| %6 = OpFunction %1 None %5 |
| %7 = OpFunctionParameter %3 |
| %8 = OpFunctionParameter %4 |
| %9 = OpLabel |
| OpCopyMemory %8 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Source operand <id> '7[%7]' cannot be a void " |
| "pointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypePointer Function %2 |
| %5 = OpConstant %2 4 |
| %6 = OpVariable %3 UniformConstant %5 |
| %7 = OpTypeFunction %1 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| %10 = OpVariable %4 Function |
| OpCopyMemorySized %10 %6 %5 None |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedTargetBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypePointer Function %2 |
| %5 = OpConstant %2 4 |
| %6 = OpVariable %3 UniformConstant %5 |
| %7 = OpTypeFunction %1 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| OpCopyMemorySized %5 %5 %5 None |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Target operand <id> '5[%uint_4]' is not a pointer.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSourceBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypePointer Function %2 |
| %5 = OpConstant %2 4 |
| %6 = OpTypeFunction %1 |
| %7 = OpFunction %1 None %6 |
| %8 = OpLabel |
| %9 = OpVariable %4 Function |
| OpCopyMemorySized %9 %5 %5 None |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Source operand <id> '5[%uint_4]' is not a pointer.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypePointer Function %2 |
| %5 = OpConstant %2 4 |
| %6 = OpVariable %3 UniformConstant %5 |
| %7 = OpTypeFunction %1 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| %10 = OpVariable %4 Function |
| OpCopyMemorySized %10 %6 %6 None |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Size operand <id> '6[%6]' must be a scalar integer type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer UniformConstant %2 |
| %4 = OpTypePointer Function %2 |
| %5 = OpConstant %2 4 |
| %6 = OpVariable %3 UniformConstant %5 |
| %7 = OpTypeFunction %1 |
| %11 = OpTypeFloat 32 |
| %12 = OpConstant %11 1.0 |
| %8 = OpFunction %1 None %7 |
| %9 = OpLabel |
| %10 = OpVariable %4 Function |
| OpCopyMemorySized %10 %6 %12 None |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Size operand <id> '9[%float_1]' must be a scalar integer " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeConstantNull) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstantNull %2 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Size operand <id> '3[%3]' cannot be a constant " |
| "zero.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeConstantZero) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 0 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Size operand <id> '3[%uint_0]' cannot be a constant " |
| "zero.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeConstantZero64) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 64 0 |
| %3 = OpConstant %2 0 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Size operand <id> '3[%ulong_0]' cannot be a constant " |
| "zero.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeConstantNegative) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 1 |
| %3 = OpConstant %2 -1 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Size operand <id> '3[%int_n1]' cannot have the sign bit set " |
| "to 1.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeConstantNegative64) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 64 1 |
| %3 = OpConstant %2 -1 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Size operand <id> '3[%long_n1]' cannot have the sign bit set " |
| "to 1.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeUnsignedNegative) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 2147483648 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpCopyMemorySizedSizeUnsignedNegative64) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 64 0 |
| %3 = OpConstant %2 9223372036854775808 |
| %4 = OpTypePointer Uniform %2 |
| %5 = OpTypeFloat 32 |
| %6 = OpTypePointer UniformConstant %5 |
| %7 = OpTypeFunction %1 %4 %6 |
| %8 = OpFunction %1 None %7 |
| %9 = OpFunctionParameter %4 |
| %10 = OpFunctionParameter %6 |
| %11 = OpLabel |
| OpCopyMemorySized %9 %10 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| const char kDeeplyNestedStructureSetup[] = R"( |
| %void = OpTypeVoid |
| %void_f = OpTypeFunction %void |
| %int = OpTypeInt 32 0 |
| %float = OpTypeFloat 32 |
| %v3float = OpTypeVector %float 3 |
| %mat4x3 = OpTypeMatrix %v3float 4 |
| %_ptr_Private_mat4x3 = OpTypePointer Private %mat4x3 |
| %_ptr_Private_float = OpTypePointer Private %float |
| %my_matrix = OpVariable %_ptr_Private_mat4x3 Private |
| %my_float_var = OpVariable %_ptr_Private_float Private |
| %_ptr_Function_float = OpTypePointer Function %float |
| %int_0 = OpConstant %int 0 |
| %int_1 = OpConstant %int 1 |
| %int_2 = OpConstant %int 2 |
| %int_3 = OpConstant %int 3 |
| %int_5 = OpConstant %int 5 |
| |
| ; Making the following nested structures. |
| ; |
| ; struct S { |
| ; bool b; |
| ; vec4 v[5]; |
| ; int i; |
| ; mat4x3 m[5]; |
| ; } |
| ; uniform blockName { |
| ; S s; |
| ; bool cond; |
| ; RunTimeArray arr; |
| ; } |
| |
| %f32arr = OpTypeRuntimeArray %float |
| %v4float = OpTypeVector %float 4 |
| %array5_mat4x3 = OpTypeArray %mat4x3 %int_5 |
| %array5_vec4 = OpTypeArray %v4float %int_5 |
| %_ptr_Uniform_float = OpTypePointer Uniform %float |
| %_ptr_Function_vec4 = OpTypePointer Function %v4float |
| %_ptr_Uniform_vec4 = OpTypePointer Uniform %v4float |
| %struct_s = OpTypeStruct %int %array5_vec4 %int %array5_mat4x3 |
| %struct_blockName = OpTypeStruct %struct_s %int %f32arr |
| %_ptr_Uniform_blockName = OpTypePointer Uniform %struct_blockName |
| %_ptr_Uniform_struct_s = OpTypePointer Uniform %struct_s |
| %_ptr_Uniform_array5_mat4x3 = OpTypePointer Uniform %array5_mat4x3 |
| %_ptr_Uniform_mat4x3 = OpTypePointer Uniform %mat4x3 |
| %_ptr_Uniform_v3float = OpTypePointer Uniform %v3float |
| %blockName_var = OpVariable %_ptr_Uniform_blockName Uniform |
| %spec_int = OpSpecConstant %int 2 |
| %float_0 = OpConstant %float 0 |
| %func = OpFunction %void None %void_f |
| %my_label = OpLabel |
| )"; |
| |
| // In what follows, Access Chain Instruction refers to one of the following: |
| // OpAccessChain, OpInBoundsAccessChain, OpPtrAccessChain, and |
| // OpInBoundsPtrAccessChain |
| using AccessChainInstructionTest = spvtest::ValidateBase<std::string>; |
| |
| // Determines whether the access chain instruction requires the 'element id' |
| // argument. |
| bool AccessChainRequiresElemId(const std::string& instr) { |
| return (instr == "OpPtrAccessChain" || instr == "OpInBoundsPtrAccessChain"); |
| } |
| |
| // Valid: Access a float in a matrix using an access chain instruction. |
| TEST_P(AccessChainInstructionTest, AccessChainGood) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + |
| "%float_entry = " + instr + |
| R"( %_ptr_Private_float %my_matrix )" + elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid. The result type of an access chain instruction must be a pointer. |
| TEST_P(AccessChainInstructionTest, AccessChainResultTypeBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %float_entry = )" + |
| instr + |
| R"( %float %my_matrix )" + elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| const std::string expected_err = "The Result Type of " + instr + |
| " <id> '36[%36]' must be " |
| "OpTypePointer. Found OpTypeFloat."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid. The base type of an access chain instruction must be a pointer. |
| TEST_P(AccessChainInstructionTest, AccessChainBaseTypeVoidBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %float_entry = )" + |
| instr + " %_ptr_Private_float %void " + elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("Operand 1[%void] cannot be a " |
| "type")); |
| } |
| |
| // Invalid. The base type of an access chain instruction must be a pointer. |
| TEST_P(AccessChainInstructionTest, AccessChainBaseTypeNonPtrVariableBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_float %_ptr_Private_float )" + |
| elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Operand 8[%_ptr_Private_float] cannot be a type")); |
| } |
| |
| // Invalid: The storage class of Base and Result do not match. |
| TEST_P(AccessChainInstructionTest, |
| AccessChainResultAndBaseStorageClassDoesntMatchBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Function_float %my_matrix )" + elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = |
| "The result pointer storage class and base pointer storage class in " + |
| instr + " do not match."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid. The base type of an access chain instruction must point to a |
| // composite object. |
| TEST_P(AccessChainInstructionTest, |
| AccessChainBasePtrNotPointingToCompositeBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_float %my_float_var )" + elem + |
| R"(%int_0 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = instr + |
| " reached non-composite type while " |
| "indexes still remain to be traversed."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Valid. No Indexes were passed to the access chain instruction. The Result |
| // Type is the same as the Base type. |
| TEST_P(AccessChainInstructionTest, AccessChainNoIndexesGood) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_float %my_float_var )" + elem + |
| R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid. No Indexes were passed to the access chain instruction, but the |
| // Result Type is different from the Base type. |
| TEST_P(AccessChainInstructionTest, AccessChainNoIndexesBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_mat4x3 %my_float_var )" + elem + |
| R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("result type (OpTypeMatrix) does not match the type that " |
| "results from indexing into the base <id> (OpTypeFloat).")); |
| } |
| |
| // Valid: 255 indexes passed to the access chain instruction. Limit is 255. |
| TEST_P(AccessChainInstructionTest, AccessChainTooManyIndexesGood) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? " %int_0 " : ""; |
| int depth = 255; |
| std::string header = kGLSL450MemoryModel + kDeeplyNestedStructureSetup; |
| header.erase(header.find("%func")); |
| std::ostringstream spirv; |
| spirv << header << "\n"; |
| |
| // Build nested structures. Struct 'i' contains struct 'i-1' |
| spirv << "%s_depth_1 = OpTypeStruct %float\n"; |
| for (int i = 2; i <= depth; ++i) { |
| spirv << "%s_depth_" << i << " = OpTypeStruct %s_depth_" << i - 1 << "\n"; |
| } |
| |
| // Define Pointer and Variable to use for the AccessChain instruction. |
| spirv << "%_ptr_Uniform_deep_struct = OpTypePointer Uniform %s_depth_" |
| << depth << "\n"; |
| spirv << "%deep_var = OpVariable %_ptr_Uniform_deep_struct Uniform\n"; |
| |
| // Function Start |
| spirv << R"( |
| %func = OpFunction %void None %void_f |
| %my_label = OpLabel |
| )"; |
| |
| // AccessChain with 'n' indexes (n = depth) |
| spirv << "%entry = " << instr << " %_ptr_Uniform_float %deep_var" << elem; |
| for (int i = 0; i < depth; ++i) { |
| spirv << " %int_0"; |
| } |
| |
| // Function end |
| spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: 256 indexes passed to the access chain instruction. Limit is 255. |
| TEST_P(AccessChainInstructionTest, AccessChainTooManyIndexesBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? " %int_0 " : ""; |
| std::ostringstream spirv; |
| spirv << kGLSL450MemoryModel << kDeeplyNestedStructureSetup; |
| spirv << "%entry = " << instr << " %_ptr_Private_float %my_matrix" << elem; |
| for (int i = 0; i < 256; ++i) { |
| spirv << " %int_0"; |
| } |
| spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = "The number of indexes in " + instr + |
| " may not exceed 255. Found 256 indexes."; |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Valid: 10 indexes passed to the access chain instruction. (Custom limit: 10) |
| TEST_P(AccessChainInstructionTest, CustomizedAccessChainTooManyIndexesGood) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? " %int_0 " : ""; |
| int depth = 10; |
| std::string header = kGLSL450MemoryModel + kDeeplyNestedStructureSetup; |
| header.erase(header.find("%func")); |
| std::ostringstream spirv; |
| spirv << header << "\n"; |
| |
| // Build nested structures. Struct 'i' contains struct 'i-1' |
| spirv << "%s_depth_1 = OpTypeStruct %float\n"; |
| for (int i = 2; i <= depth; ++i) { |
| spirv << "%s_depth_" << i << " = OpTypeStruct %s_depth_" << i - 1 << "\n"; |
| } |
| |
| // Define Pointer and Variable to use for the AccessChain instruction. |
| spirv << "%_ptr_Uniform_deep_struct = OpTypePointer Uniform %s_depth_" |
| << depth << "\n"; |
| spirv << "%deep_var = OpVariable %_ptr_Uniform_deep_struct Uniform\n"; |
| |
| // Function Start |
| spirv << R"( |
| %func = OpFunction %void None %void_f |
| %my_label = OpLabel |
| )"; |
| |
| // AccessChain with 'n' indexes (n = depth) |
| spirv << "%entry = " << instr << " %_ptr_Uniform_float %deep_var" << elem; |
| for (int i = 0; i < depth; ++i) { |
| spirv << " %int_0"; |
| } |
| |
| // Function end |
| spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| spvValidatorOptionsSetUniversalLimit( |
| options_, spv_validator_limit_max_access_chain_indexes, 10u); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: 11 indexes passed to the access chain instruction. Custom Limit:10 |
| TEST_P(AccessChainInstructionTest, CustomizedAccessChainTooManyIndexesBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? " %int_0 " : ""; |
| std::ostringstream spirv; |
| spirv << kGLSL450MemoryModel << kDeeplyNestedStructureSetup; |
| spirv << "%entry = " << instr << " %_ptr_Private_float %my_matrix" << elem; |
| for (int i = 0; i < 11; ++i) { |
| spirv << " %int_0"; |
| } |
| spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = "The number of indexes in " + instr + |
| " may not exceed 10. Found 11 indexes."; |
| spvValidatorOptionsSetUniversalLimit( |
| options_, spv_validator_limit_max_access_chain_indexes, 10u); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: Index passed to the access chain instruction is float (must be |
| // integer). |
| TEST_P(AccessChainInstructionTest, AccessChainUndefinedIndexBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_float %my_matrix )" + elem + |
| R"(%float_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = |
| "Indexes passed to " + instr + " must be of type integer."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: The index argument that indexes into a struct must be of type |
| // OpConstant. |
| TEST_P(AccessChainInstructionTest, AccessChainStructIndexNotConstantBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %f = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_0 %spec_int %int_2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = |
| "The <id> passed to " + instr + |
| " to index into a structure must be an OpConstant."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: Indexing up to a vec4 granularity, but result type expected float. |
| TEST_P(AccessChainInstructionTest, |
| AccessChainStructResultTypeDoesntMatchIndexedTypeBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_0 %int_1 %int_2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = instr + |
| " result type (OpTypeFloat) does not match " |
| "the type that results from indexing into " |
| "the base <id> (OpTypeVector)."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: Reach non-composite type (bool) when unused indexes remain. |
| TEST_P(AccessChainInstructionTest, AccessChainStructTooManyIndexesBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_0 %int_2 %int_2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = instr + |
| " reached non-composite type while " |
| "indexes still remain to be traversed."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: Trying to find index 3 of the struct that has only 3 members. |
| TEST_P(AccessChainInstructionTest, AccessChainStructIndexOutOfBoundBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_3 %int_2 %int_2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = "Index is out of bounds: " + instr + |
| " can not find index 3 into the structure " |
| "<id> '25[%_struct_25]'. This structure " |
| "has 3 members. Largest valid index is 2."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Valid: Tests that we can index into Struct, Array, Matrix, and Vector! |
| TEST_P(AccessChainInstructionTest, AccessChainIndexIntoAllTypesGood) { |
| // indexes that we are passing are: 0, 3, 1, 2, 0 |
| // 0 will select the struct_s within the base struct (blockName) |
| // 3 will select the Array that contains 5 matrices |
| // 1 will select the Matrix that is at index 1 of the array |
| // 2 will select the column (which is a vector) within the matrix at index 2 |
| // 0 will select the element at the index 0 of the vector. (which is a float). |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::ostringstream spirv; |
| spirv << kGLSL450MemoryModel << kDeeplyNestedStructureSetup << std::endl; |
| spirv << "%ss = " << instr << " %_ptr_Uniform_struct_s %blockName_var " |
| << elem << "%int_0" << std::endl; |
| spirv << "%sa = " << instr << " %_ptr_Uniform_array5_mat4x3 %blockName_var " |
| << elem << "%int_0 %int_3" << std::endl; |
| spirv << "%sm = " << instr << " %_ptr_Uniform_mat4x3 %blockName_var " << elem |
| << "%int_0 %int_3 %int_1" << std::endl; |
| spirv << "%sc = " << instr << " %_ptr_Uniform_v3float %blockName_var " << elem |
| << "%int_0 %int_3 %int_1 %int_2" << std::endl; |
| spirv << "%entry = " << instr << " %_ptr_Uniform_float %blockName_var " |
| << elem << "%int_0 %int_3 %int_1 %int_2 %int_0" << std::endl; |
| spirv << R"( |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Valid: Access an element of OpTypeRuntimeArray. |
| TEST_P(AccessChainInstructionTest, AccessChainIndexIntoRuntimeArrayGood) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %runtime_arr_entry = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_2 %int_0 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: Unused index when accessing OpTypeRuntimeArray. |
| TEST_P(AccessChainInstructionTest, AccessChainIndexIntoRuntimeArrayBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %runtime_arr_entry = )" + |
| instr + R"( %_ptr_Uniform_float %blockName_var )" + elem + |
| R"(%int_2 %int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = |
| instr + |
| " reached non-composite type while indexes still remain to be traversed."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: Reached scalar type before arguments to the access chain instruction |
| // finished. |
| TEST_P(AccessChainInstructionTest, AccessChainMatrixMoreArgsThanNeededBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_float %my_matrix )" + elem + |
| R"(%int_0 %int_1 %int_0 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = instr + |
| " reached non-composite type while " |
| "indexes still remain to be traversed."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Invalid: The result type and the type indexed into do not match. |
| TEST_P(AccessChainInstructionTest, |
| AccessChainResultTypeDoesntMatchIndexedTypeBad) { |
| const std::string instr = GetParam(); |
| const std::string elem = AccessChainRequiresElemId(instr) ? "%int_0 " : ""; |
| std::string spirv = kGLSL450MemoryModel + kDeeplyNestedStructureSetup + R"( |
| %entry = )" + |
| instr + R"( %_ptr_Private_mat4x3 %my_matrix )" + elem + |
| R"(%int_0 %int_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| const std::string expected_err = instr + |
| " result type (OpTypeMatrix) does not match " |
| "the type that results from indexing into " |
| "the base <id> (OpTypeFloat)."; |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(expected_err)); |
| } |
| |
| // Run tests for Access Chain Instructions. |
| INSTANTIATE_TEST_SUITE_P( |
| CheckAccessChainInstructions, AccessChainInstructionTest, |
| ::testing::Values("OpAccessChain", "OpInBoundsAccessChain", |
| "OpPtrAccessChain", "OpInBoundsPtrAccessChain")); |
| |
| // TODO: OpArrayLength |
| // TODO: OpImagePointer |
| // TODO: OpGenericPtrMemSemantics |
| |
| TEST_F(ValidateIdWithMessage, OpFunctionGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %1 %2 %2 |
| %4 = OpFunction %1 None %3 |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpConstant %2 42 |
| %4 = OpTypeFunction %1 %2 %2 |
| %5 = OpFunction %2 None %4 |
| %6 = OpLabel |
| OpReturnValue %3 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpFunction Result Type <id> '2[%uint]' does not " |
| "match the Function Type's return type <id> " |
| "'1[%void]'.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpReturnValueTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeInt 32 0 |
| %2 = OpTypeFloat 32 |
| %3 = OpConstant %2 0 |
| %4 = OpTypeFunction %1 |
| %5 = OpFunction %1 None %4 |
| %6 = OpLabel |
| OpReturnValue %3 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpReturnValue Value <id> '3[%float_0]'s type does " |
| "not match OpFunction's return type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionFunctionTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %4 = OpFunction %1 None %2 |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpFunction Function Type <id> '2[%uint]' is not a function " |
| "type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpFunctionUseBad) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeFloat 32 |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| OpReturnValue %3 |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Invalid use of function result id 3[%3].")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpFunctionParameterGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %1 %2 |
| %4 = OpFunction %1 None %3 |
| %5 = OpFunctionParameter %2 |
| %6 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionParameterMultipleGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %1 %2 %2 |
| %4 = OpFunction %1 None %3 |
| %5 = OpFunctionParameter %2 |
| %6 = OpFunctionParameter %2 |
| %7 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionParameterResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %1 %2 |
| %4 = OpFunction %1 None %3 |
| %5 = OpFunctionParameter %1 |
| %6 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpFunctionParameter Result Type <id> '1[%void]' does not " |
| "match the OpTypeFunction parameter type of the same index.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpFunctionCallGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 ;21 |
| |
| %6 = OpFunction %2 None %3 |
| %7 = OpFunctionParameter %2 |
| %8 = OpLabel |
| OpReturnValue %7 |
| OpFunctionEnd |
| |
| %10 = OpFunction %1 None %4 |
| %11 = OpLabel |
| %12 = OpFunctionCall %2 %6 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionCallResultTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 ;21 |
| |
| %6 = OpFunction %2 None %3 |
| %7 = OpFunctionParameter %2 |
| %8 = OpLabel |
| %9 = OpIAdd %2 %7 %7 |
| OpReturnValue %9 |
| OpFunctionEnd |
| |
| %10 = OpFunction %1 None %4 |
| %11 = OpLabel |
| %12 = OpFunctionCall %1 %6 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpFunctionCall Result Type <id> '1[%void]'s type " |
| "does not match Function <id> '2[%uint]'s return " |
| "type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionCallFunctionBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 ;21 |
| |
| %10 = OpFunction %1 None %4 |
| %11 = OpLabel |
| %12 = OpFunctionCall %2 %5 %5 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpFunctionCall Function <id> '5[%uint_42]' is not a " |
| "function.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpFunctionCallArgumentTypeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 |
| |
| %13 = OpTypeFloat 32 |
| %14 = OpConstant %13 3.14 |
| |
| %6 = OpFunction %2 None %3 |
| %7 = OpFunctionParameter %2 |
| %8 = OpLabel |
| %9 = OpIAdd %2 %7 %7 |
| OpReturnValue %9 |
| OpFunctionEnd |
| |
| %10 = OpFunction %1 None %4 |
| %11 = OpLabel |
| %12 = OpFunctionCall %2 %6 %14 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpFunctionCall Argument <id> '7[%float_3_1400001]'s " |
| "type does not match Function <id> '2[%uint]'s " |
| "parameter type.")); |
| } |
| |
| // Valid: OpSampledImage result <id> is used in the same block by |
| // OpImageSampleImplictLod |
| TEST_F(ValidateIdWithMessage, OpSampledImageGood) { |
| std::string spirv = kGLSL450MemoryModel + sampledImageSetup + R"( |
| %smpld_img = OpSampledImage %sampled_image_type %image_inst %sampler_inst |
| %si_lod = OpImageSampleImplicitLod %v4float %smpld_img %const_vec_1_1 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Invalid: OpSampledImage result <id> is defined in one block and used in a |
| // different block. |
| TEST_F(ValidateIdWithMessage, OpSampledImageUsedInDifferentBlockBad) { |
| std::string spirv = kGLSL450MemoryModel + sampledImageSetup + R"( |
| %smpld_img = OpSampledImage %sampled_image_type %image_inst %sampler_inst |
| OpBranch %label_2 |
| %label_2 = OpLabel |
| %si_lod = OpImageSampleImplicitLod %v4float %smpld_img %const_vec_1_1 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("All OpSampledImage instructions must be in the same block in " |
| "which their Result <id> are consumed. OpSampledImage Result " |
| "Type <id> '23[%23]' has a consumer in a different basic " |
| "block. The consumer instruction <id> is '25[%25]'.")); |
| } |
| |
| // Invalid: OpSampledImage result <id> is used by OpSelect |
| // Note: According to the Spec, OpSelect parameters must be either a scalar or a |
| // vector. Therefore, OpTypeSampledImage is an illegal parameter for OpSelect. |
| // However, the OpSelect validation does not catch this today. Therefore, it is |
| // caught by the OpSampledImage validation. If the OpSelect validation code is |
| // updated, the error message for this test may change. |
| // |
| // Disabled since OpSelect catches this now. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpSampledImageUsedInOpSelectBad) { |
| std::string spirv = kGLSL450MemoryModel + sampledImageSetup + R"( |
| %smpld_img = OpSampledImage %sampled_image_type %image_inst %sampler_inst |
| %select_img = OpSelect %sampled_image_type %spec_true %smpld_img %smpld_img |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Result <id> from OpSampledImage instruction must not " |
| "appear as operands of OpSelect. Found result <id> " |
| "'23' as an operand of <id> '24'.")); |
| } |
| |
| // Valid: Get a float in a matrix using CompositeExtract. |
| // Valid: Insert float into a matrix using CompositeInsert. |
| TEST_F(ValidateIdWithMessage, CompositeExtractInsertGood) { |
| std::ostringstream spirv; |
| spirv << kGLSL450MemoryModel << kDeeplyNestedStructureSetup << std::endl; |
| spirv << "%matrix = OpLoad %mat4x3 %my_matrix" << std::endl; |
| spirv << "%float_entry = OpCompositeExtract %float %matrix 0 1" << std::endl; |
| |
| // To test CompositeInsert, insert the object back in after extraction. |
| spirv << "%new_composite = OpCompositeInsert %mat4x3 %float_entry %matrix 0 1" |
| << std::endl; |
| spirv << R"(OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| #if 0 |
| TEST_F(ValidateIdWithMessage, OpFunctionCallArgumentCountBar) { |
| const char *spirv = R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 %2 |
| %4 = OpTypeFunction %1 |
| %5 = OpConstant %2 42 ;21 |
| |
| %6 = OpFunction %2 None %3 |
| %7 = OpFunctionParameter %2 |
| %8 = OpLabel |
| %9 = OpLoad %2 %7 |
| OpReturnValue %9 |
| OpFunctionEnd |
| |
| %10 = OpFunction %1 None %4 |
| %11 = OpLabel |
| OpReturn |
| %12 = OpFunctionCall %2 %6 %5 |
| OpFunctionEnd)"; |
| CHECK(spirv, SPV_ERROR_INVALID_ID); |
| } |
| #endif |
| |
| // TODO: The many things that changed with how images are used. |
| // TODO: OpTextureSample |
| // TODO: OpTextureSampleDref |
| // TODO: OpTextureSampleLod |
| // TODO: OpTextureSampleProj |
| // TODO: OpTextureSampleGrad |
| // TODO: OpTextureSampleOffset |
| // TODO: OpTextureSampleProjLod |
| // TODO: OpTextureSampleProjGrad |
| // TODO: OpTextureSampleLodOffset |
| // TODO: OpTextureSampleProjOffset |
| // TODO: OpTextureSampleGradOffset |
| // TODO: OpTextureSampleProjLodOffset |
| // TODO: OpTextureSampleProjGradOffset |
| // TODO: OpTextureFetchTexelLod |
| // TODO: OpTextureFetchTexelOffset |
| // TODO: OpTextureFetchSample |
| // TODO: OpTextureFetchTexel |
| // TODO: OpTextureGather |
| // TODO: OpTextureGatherOffset |
| // TODO: OpTextureGatherOffsets |
| // TODO: OpTextureQuerySizeLod |
| // TODO: OpTextureQuerySize |
| // TODO: OpTextureQueryLevels |
| // TODO: OpTextureQuerySamples |
| // TODO: OpConvertUToF |
| // TODO: OpConvertFToS |
| // TODO: OpConvertSToF |
| // TODO: OpConvertUToF |
| // TODO: OpUConvert |
| // TODO: OpSConvert |
| // TODO: OpFConvert |
| // TODO: OpConvertPtrToU |
| // TODO: OpConvertUToPtr |
| // TODO: OpPtrCastToGeneric |
| // TODO: OpGenericCastToPtr |
| // TODO: OpBitcast |
| // TODO: OpGenericCastToPtrExplicit |
| // TODO: OpSatConvertSToU |
| // TODO: OpSatConvertUToS |
| // TODO: OpVectorExtractDynamic |
| // TODO: OpVectorInsertDynamic |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleIntGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec3 = OpTypeVector %int 3 |
| %ivec4 = OpTypeVector %int 4 |
| %ptr_ivec3 = OpTypePointer Function %ivec3 |
| %undef = OpUndef %ivec4 |
| %int_42 = OpConstant %int 42 |
| %int_0 = OpConstant %int 0 |
| %int_2 = OpConstant %int 2 |
| %1 = OpConstantComposite %ivec3 %int_42 %int_0 %int_2 |
| %2 = OpTypeFunction %ivec3 |
| %3 = OpFunction %ivec3 None %2 |
| %4 = OpLabel |
| %var = OpVariable %ptr_ivec3 Function %1 |
| %5 = OpLoad %ivec3 %var |
| %6 = OpVectorShuffle %ivec3 %5 %undef 2 1 0 |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleFloatGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %float = OpTypeFloat 32 |
| %vec2 = OpTypeVector %float 2 |
| %vec3 = OpTypeVector %float 3 |
| %vec4 = OpTypeVector %float 4 |
| %ptr_vec2 = OpTypePointer Function %vec2 |
| %ptr_vec3 = OpTypePointer Function %vec3 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %vec2 %float_2 %float_1 |
| %2 = OpConstantComposite %vec3 %float_1 %float_2 %float_2 |
| %3 = OpTypeFunction %vec4 |
| %4 = OpFunction %vec4 None %3 |
| %5 = OpLabel |
| %var = OpVariable %ptr_vec2 Function %1 |
| %var2 = OpVariable %ptr_vec3 Function %2 |
| %6 = OpLoad %vec2 %var |
| %7 = OpLoad %vec3 %var2 |
| %8 = OpVectorShuffle %vec4 %6 %7 4 3 1 0xffffffff |
| OpReturnValue %8 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleScalarResultType) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %float = OpTypeFloat 32 |
| %vec2 = OpTypeVector %float 2 |
| %ptr_vec2 = OpTypePointer Function %vec2 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %vec2 %float_2 %float_1 |
| %2 = OpTypeFunction %float |
| %3 = OpFunction %float None %2 |
| %4 = OpLabel |
| %var = OpVariable %ptr_vec2 Function %1 |
| %5 = OpLoad %vec2 %var |
| %6 = OpVectorShuffle %float %5 %5 0 |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Result Type of OpVectorShuffle must be OpTypeVector.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleComponentCount) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec3 = OpTypeVector %int 3 |
| %ptr_ivec3 = OpTypePointer Function %ivec3 |
| %int_42 = OpConstant %int 42 |
| %int_0 = OpConstant %int 0 |
| %int_2 = OpConstant %int 2 |
| %1 = OpConstantComposite %ivec3 %int_42 %int_0 %int_2 |
| %2 = OpTypeFunction %ivec3 |
| %3 = OpFunction %ivec3 None %2 |
| %4 = OpLabel |
| %var = OpVariable %ptr_ivec3 Function %1 |
| %5 = OpLoad %ivec3 %var |
| %6 = OpVectorShuffle %ivec3 %5 %5 0 1 |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpVectorShuffle component literals count does not match " |
| "Result Type <id> '2[%v3uint]'s vector component count.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleVector1Type) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec2 = OpTypeVector %int 2 |
| %ptr_int = OpTypePointer Function %int |
| %undef = OpUndef %ivec2 |
| %int_42 = OpConstant %int 42 |
| %2 = OpTypeFunction %ivec2 |
| %3 = OpFunction %ivec2 None %2 |
| %4 = OpLabel |
| %var = OpVariable %ptr_int Function %int_42 |
| %5 = OpLoad %int %var |
| %6 = OpVectorShuffle %ivec2 %5 %undef 0 0 |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The type of Vector 1 must be OpTypeVector.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleVector2Type) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec2 = OpTypeVector %int 2 |
| %ptr_ivec2 = OpTypePointer Function %ivec2 |
| %undef = OpUndef %int |
| %int_42 = OpConstant %int 42 |
| %1 = OpConstantComposite %ivec2 %int_42 %int_42 |
| %2 = OpTypeFunction %ivec2 |
| %3 = OpFunction %ivec2 None %2 |
| %4 = OpLabel |
| %var = OpVariable %ptr_ivec2 Function %1 |
| %5 = OpLoad %ivec2 %var |
| %6 = OpVectorShuffle %ivec2 %5 %undef 0 1 |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The type of Vector 2 must be OpTypeVector.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleVector1ComponentType) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec3 = OpTypeVector %int 3 |
| %ptr_ivec3 = OpTypePointer Function %ivec3 |
| %int_42 = OpConstant %int 42 |
| %int_0 = OpConstant %int 0 |
| %int_2 = OpConstant %int 2 |
| %float = OpTypeFloat 32 |
| %vec3 = OpTypeVector %float 3 |
| %vec4 = OpTypeVector %float 4 |
| %ptr_vec3 = OpTypePointer Function %vec3 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %ivec3 %int_42 %int_0 %int_2 |
| %2 = OpConstantComposite %vec3 %float_1 %float_2 %float_2 |
| %3 = OpTypeFunction %vec4 |
| %4 = OpFunction %vec4 None %3 |
| %5 = OpLabel |
| %var = OpVariable %ptr_ivec3 Function %1 |
| %var2 = OpVariable %ptr_vec3 Function %2 |
| %6 = OpLoad %ivec3 %var |
| %7 = OpLoad %vec3 %var2 |
| %8 = OpVectorShuffle %vec4 %6 %7 4 3 1 0 |
| OpReturnValue %8 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The Component Type of Vector 1 must be the same as " |
| "ResultType.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleVector2ComponentType) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %int = OpTypeInt 32 0 |
| %ivec3 = OpTypeVector %int 3 |
| %ptr_ivec3 = OpTypePointer Function %ivec3 |
| %int_42 = OpConstant %int 42 |
| %int_0 = OpConstant %int 0 |
| %int_2 = OpConstant %int 2 |
| %float = OpTypeFloat 32 |
| %vec3 = OpTypeVector %float 3 |
| %vec4 = OpTypeVector %float 4 |
| %ptr_vec3 = OpTypePointer Function %vec3 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %ivec3 %int_42 %int_0 %int_2 |
| %2 = OpConstantComposite %vec3 %float_1 %float_2 %float_2 |
| %3 = OpTypeFunction %vec4 |
| %4 = OpFunction %vec4 None %3 |
| %5 = OpLabel |
| %var = OpVariable %ptr_ivec3 Function %1 |
| %var2 = OpVariable %ptr_vec3 Function %2 |
| %6 = OpLoad %vec3 %var2 |
| %7 = OpLoad %ivec3 %var |
| %8 = OpVectorShuffle %vec4 %6 %7 4 3 1 0 |
| OpReturnValue %8 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The Component Type of Vector 2 must be the same as " |
| "ResultType.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpVectorShuffleLiterals) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %float = OpTypeFloat 32 |
| %vec2 = OpTypeVector %float 2 |
| %vec3 = OpTypeVector %float 3 |
| %vec4 = OpTypeVector %float 4 |
| %ptr_vec2 = OpTypePointer Function %vec2 |
| %ptr_vec3 = OpTypePointer Function %vec3 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %vec2 %float_2 %float_1 |
| %2 = OpConstantComposite %vec3 %float_1 %float_2 %float_2 |
| %3 = OpTypeFunction %vec4 |
| %4 = OpFunction %vec4 None %3 |
| %5 = OpLabel |
| %var = OpVariable %ptr_vec2 Function %1 |
| %var2 = OpVariable %ptr_vec3 Function %2 |
| %6 = OpLoad %vec2 %var |
| %7 = OpLoad %vec3 %var2 |
| %8 = OpVectorShuffle %vec4 %6 %7 0 8 2 6 |
| OpReturnValue %8 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "Component index 8 is out of bounds for combined (Vector1 + Vector2) " |
| "size of 5.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, WebGPUOpVectorShuffle0xFFFFFFFFLiteralBad) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %float = OpTypeFloat 32 |
| %vec2 = OpTypeVector %float 2 |
| %vec3 = OpTypeVector %float 3 |
| %vec4 = OpTypeVector %float 4 |
| %ptr_vec2 = OpTypePointer Function %vec2 |
| %ptr_vec3 = OpTypePointer Function %vec3 |
| %float_1 = OpConstant %float 1 |
| %float_2 = OpConstant %float 2 |
| %1 = OpConstantComposite %vec2 %float_2 %float_1 |
| %2 = OpConstantComposite %vec3 %float_1 %float_2 %float_2 |
| %3 = OpTypeFunction %vec4 |
| %4 = OpFunction %vec4 None %3 |
| %5 = OpLabel |
| %var = OpVariable %ptr_vec2 Function %1 |
| %var2 = OpVariable %ptr_vec3 Function %2 |
| %6 = OpLoad %vec2 %var |
| %7 = OpLoad %vec3 %var2 |
| %8 = OpVectorShuffle %vec4 %6 %7 4 3 1 0xffffffff |
| OpReturnValue %8 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str(), SPV_ENV_WEBGPU_0); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_WEBGPU_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Component literal at operand 3 cannot be 0xFFFFFFFF in" |
| " WebGPU execution environment.")); |
| } |
| |
| // TODO: OpCompositeConstruct |
| // TODO: OpCompositeExtract |
| // TODO: OpCompositeInsert |
| // TODO: OpCopyObject |
| // TODO: OpTranspose |
| // TODO: OpSNegate |
| // TODO: OpFNegate |
| // TODO: OpNot |
| // TODO: OpIAdd |
| // TODO: OpFAdd |
| // TODO: OpISub |
| // TODO: OpFSub |
| // TODO: OpIMul |
| // TODO: OpFMul |
| // TODO: OpUDiv |
| // TODO: OpSDiv |
| // TODO: OpFDiv |
| // TODO: OpUMod |
| // TODO: OpSRem |
| // TODO: OpSMod |
| // TODO: OpFRem |
| // TODO: OpFMod |
| // TODO: OpVectorTimesScalar |
| // TODO: OpMatrixTimesScalar |
| // TODO: OpVectorTimesMatrix |
| // TODO: OpMatrixTimesVector |
| // TODO: OpMatrixTimesMatrix |
| // TODO: OpOuterProduct |
| // TODO: OpDot |
| // TODO: OpShiftRightLogical |
| // TODO: OpShiftRightArithmetic |
| // TODO: OpShiftLeftLogical |
| // TODO: OpBitwiseOr |
| // TODO: OpBitwiseXor |
| // TODO: OpBitwiseAnd |
| // TODO: OpAny |
| // TODO: OpAll |
| // TODO: OpIsNan |
| // TODO: OpIsInf |
| // TODO: OpIsFinite |
| // TODO: OpIsNormal |
| // TODO: OpSignBitSet |
| // TODO: OpLessOrGreater |
| // TODO: OpOrdered |
| // TODO: OpUnordered |
| // TODO: OpLogicalOr |
| // TODO: OpLogicalXor |
| // TODO: OpLogicalAnd |
| // TODO: OpSelect |
| // TODO: OpIEqual |
| // TODO: OpFOrdEqual |
| // TODO: OpFUnordEqual |
| // TODO: OpINotEqual |
| // TODO: OpFOrdNotEqual |
| // TODO: OpFUnordNotEqual |
| // TODO: OpULessThan |
| // TODO: OpSLessThan |
| // TODO: OpFOrdLessThan |
| // TODO: OpFUnordLessThan |
| // TODO: OpUGreaterThan |
| // TODO: OpSGreaterThan |
| // TODO: OpFOrdGreaterThan |
| // TODO: OpFUnordGreaterThan |
| // TODO: OpULessThanEqual |
| // TODO: OpSLessThanEqual |
| // TODO: OpFOrdLessThanEqual |
| // TODO: OpFUnordLessThanEqual |
| // TODO: OpUGreaterThanEqual |
| // TODO: OpSGreaterThanEqual |
| // TODO: OpFOrdGreaterThanEqual |
| // TODO: OpFUnordGreaterThanEqual |
| // TODO: OpDPdx |
| // TODO: OpDPdy |
| // TODO: OpFWidth |
| // TODO: OpDPdxFine |
| // TODO: OpDPdyFine |
| // TODO: OpFwidthFine |
| // TODO: OpDPdxCoarse |
| // TODO: OpDPdyCoarse |
| // TODO: OpFwidthCoarse |
| // TODO: OpLoopMerge |
| // TODO: OpSelectionMerge |
| // TODO: OpBranch |
| |
| TEST_F(ValidateIdWithMessage, OpPhiNotAType) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranch %8 |
| %8 = OpLabel |
| %9 = OpPhi %3 %3 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("ID 3[%true] is not a type " |
| "id")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiSamePredecessor) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranchConditional %3 %8 %8 |
| %8 = OpLabel |
| %9 = OpPhi %2 %3 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiOddArgumentNumber) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranch %8 |
| %8 = OpLabel |
| %9 = OpPhi %2 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi does not have an equal number of incoming " |
| "values and basic blocks.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiTooFewPredecessors) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranch %8 |
| %8 = OpLabel |
| %9 = OpPhi %2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi's number of incoming blocks (0) does not match " |
| "block's predecessor count (1).")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiTooManyPredecessors) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranch %8 |
| %9 = OpLabel |
| OpReturn |
| %8 = OpLabel |
| %10 = OpPhi %2 %3 %7 %3 %9 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi's number of incoming blocks (2) does not match " |
| "block's predecessor count (1).")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiMismatchedTypes) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeInt 32 0 |
| %6 = OpConstant %5 0 |
| %7 = OpTypeFunction %4 |
| %8 = OpFunction %4 None %7 |
| %9 = OpLabel |
| OpBranchConditional %3 %10 %11 |
| %11 = OpLabel |
| OpBranch %10 |
| %10 = OpLabel |
| %12 = OpPhi %2 %3 %9 %6 %11 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi's result type <id> 2[%bool] does not match " |
| "incoming value <id> 6[%uint_0] type <id> " |
| "5[%uint].")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiPredecessorNotABlock) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranchConditional %3 %8 %9 |
| %9 = OpLabel |
| OpBranch %11 |
| %11 = OpLabel |
| OpBranch %8 |
| %8 = OpLabel |
| %10 = OpPhi %2 %3 %7 %3 %3 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi's incoming basic block <id> 3[%true] is not an " |
| "OpLabel.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPhiNotAPredecessor) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| %2 = OpTypeBool |
| %3 = OpConstantTrue %2 |
| %4 = OpTypeVoid |
| %5 = OpTypeFunction %4 |
| %6 = OpFunction %4 None %5 |
| %7 = OpLabel |
| OpBranchConditional %3 %8 %9 |
| %9 = OpLabel |
| OpBranch %11 |
| %11 = OpLabel |
| OpBranch %8 |
| %8 = OpLabel |
| %10 = OpPhi %2 %3 %7 %3 %9 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpPhi's incoming basic block <id> 9[%9] is not a " |
| "predecessor of <id> 8[%8].")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditionalGood) { |
| std::string spirv = BranchConditionalSetup + R"( |
| %branch_cond = OpINotEqual %bool %i0 %i1 |
| OpSelectionMerge %end None |
| OpBranchConditional %branch_cond %target_t %target_f |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateAndRetrieveValidationState()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditionalWithWeightsGood) { |
| std::string spirv = BranchConditionalSetup + R"( |
| %branch_cond = OpINotEqual %bool %i0 %i1 |
| OpSelectionMerge %end None |
| OpBranchConditional %branch_cond %target_t %target_f 1 1 |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateAndRetrieveValidationState()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_CondIsScalarInt) { |
| std::string spirv = BranchConditionalSetup + R"( |
| OpSelectionMerge %end None |
| OpBranchConditional %i0 %target_t %target_f |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "Condition operand for OpBranchConditional must be of boolean type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_TrueTargetIsNotLabel) { |
| std::string spirv = BranchConditionalSetup + R"( |
| OpSelectionMerge %end None |
| OpBranchConditional %true %i0 %target_f |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The 'True Label' operand for OpBranchConditional must " |
| "be the ID of an OpLabel instruction")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_FalseTargetIsNotLabel) { |
| std::string spirv = BranchConditionalSetup + R"( |
| OpSelectionMerge %end None |
| OpBranchConditional %true %target_t %i0 |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("The 'False Label' operand for OpBranchConditional " |
| "must be the ID of an OpLabel instruction")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_NotEnoughWeights) { |
| std::string spirv = BranchConditionalSetup + R"( |
| %branch_cond = OpINotEqual %bool %i0 %i1 |
| OpSelectionMerge %end None |
| OpBranchConditional %branch_cond %target_t %target_f 1 |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpBranchConditional requires either 3 or 5 parameters")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_TooManyWeights) { |
| std::string spirv = BranchConditionalSetup + R"( |
| %branch_cond = OpINotEqual %bool %i0 %i1 |
| OpSelectionMerge %end None |
| OpBranchConditional %branch_cond %target_t %target_f 1 2 3 |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpBranchConditional requires either 3 or 5 parameters")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpBranchConditional_ConditionIsAType) { |
| std::string spirv = BranchConditionalSetup + R"( |
| OpBranchConditional %bool %target_t %target_f |
| )" + BranchConditionalTail; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("Operand 3[%bool] cannot be a " |
| "type")); |
| } |
| |
| // TODO: OpSwitch |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueConstantGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 |
| %4 = OpConstant %2 42 |
| %5 = OpFunction %2 None %3 |
| %6 = OpLabel |
| OpReturnValue %4 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueVariableGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 ;10 |
| %3 = OpTypeFunction %2 |
| %8 = OpTypePointer Function %2 ;18 |
| %4 = OpConstant %2 42 ;22 |
| %5 = OpFunction %2 None %3 ;27 |
| %6 = OpLabel ;29 |
| %7 = OpVariable %8 Function %4 ;34 |
| %9 = OpLoad %2 %7 |
| OpReturnValue %9 ;36 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueExpressionGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 |
| %4 = OpConstant %2 42 |
| %5 = OpFunction %2 None %3 |
| %6 = OpLabel |
| %7 = OpIAdd %2 %4 %4 |
| OpReturnValue %7 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueIsType) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 |
| %5 = OpFunction %2 None %3 |
| %6 = OpLabel |
| OpReturnValue %1 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("Operand 1[%void] cannot be a " |
| "type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueIsLabel) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 |
| %5 = OpFunction %2 None %3 |
| %6 = OpLabel |
| OpReturnValue %6 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Operand 5[%5] requires a type")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueIsVoid) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %1 |
| %5 = OpFunction %1 None %3 |
| %6 = OpLabel |
| %7 = OpFunctionCall %1 %5 |
| OpReturnValue %7 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpReturnValue value's type <id> '1[%void]' is missing or " |
| "void.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueIsVariableInPhysical) { |
| // It's valid to return a pointer in a physical addressing model. |
| std::string spirv = kOpCapabilitySetup + R"( |
| OpMemoryModel Physical32 OpenCL |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Function %2 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %3 None %4 |
| %6 = OpLabel |
| %7 = OpVariable %3 Function |
| OpReturnValue %7 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpReturnValueIsVariableInLogical) { |
| // It's invalid to return a pointer in a physical addressing model. |
| std::string spirv = kOpCapabilitySetup + R"( |
| OpMemoryModel Logical GLSL450 |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Function %2 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %3 None %4 |
| %6 = OpLabel |
| %7 = OpVariable %3 Function |
| OpReturnValue %7 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpReturnValue value's type <id> " |
| "'3[%_ptr_Function_uint]' is a pointer, which is " |
| "invalid in the Logical addressing model.")); |
| } |
| |
| // With the VariablePointer Capability, the return value of a function is |
| // allowed to be a pointer. |
| TEST_F(ValidateIdWithMessage, OpReturnValueVarPtrGood) { |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, |
| "" /* Instructions to add to "main" */, |
| true /* Add VariablePointers Capability?*/, |
| true /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| // Without the VariablePointer Capability, the return value of a function is |
| // *not* allowed to be a pointer. |
| // Disabled since using OpSelect with pointers without VariablePointers will |
| // fail LogicalsPass. |
| TEST_F(ValidateIdWithMessage, DISABLED_OpReturnValueVarPtrBad) { |
| std::ostringstream spirv; |
| createVariablePointerSpirvProgram(&spirv, |
| "" /* Instructions to add to "main" */, |
| false /* Add VariablePointers Capability?*/, |
| true /* Use Helper Function? */); |
| CompileSuccessfully(spirv.str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpReturnValue value's type <id> '7' is a pointer, " |
| "which is invalid in the Logical addressing model.")); |
| } |
| |
| // TODO: enable when this bug is fixed: |
| // https://cvs.khronos.org/bugzilla/show_bug.cgi?id=15404 |
| TEST_F(ValidateIdWithMessage, DISABLED_OpReturnValueIsFunction) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypeFunction %2 |
| %5 = OpFunction %2 None %3 |
| %6 = OpLabel |
| OpReturnValue %5 |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, UndefinedTypeId) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %s = OpTypeStruct %i32 |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Forward reference operands in an OpTypeStruct must " |
| "first be declared using OpTypeForwardPointer.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, UndefinedIdScope) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %u32 = OpTypeInt 32 0 |
| %memsem = OpConstant %u32 0 |
| %void = OpTypeVoid |
| %void_f = OpTypeFunction %void |
| %f = OpFunction %void None %void_f |
| %l = OpLabel |
| OpMemoryBarrier %undef %memsem |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("ID 7[%7] has not been " |
| "defined")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, UndefinedIdMemSem) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %u32 = OpTypeInt 32 0 |
| %scope = OpConstant %u32 0 |
| %void = OpTypeVoid |
| %void_f = OpTypeFunction %void |
| %f = OpFunction %void None %void_f |
| %l = OpLabel |
| OpMemoryBarrier %scope %undef |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("ID 7[%7] has not been " |
| "defined")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| KernelOpEntryPointAndOpInBoundsPtrAccessChainGood) { |
| std::string spirv = kOpenCLMemoryModel32 + R"( |
| OpEntryPoint Kernel %2 "simple_kernel" |
| OpSource OpenCL_C 200000 |
| OpDecorate %3 BuiltIn GlobalInvocationId |
| OpDecorate %3 Constant |
| OpDecorate %4 FuncParamAttr NoCapture |
| OpDecorate %3 LinkageAttributes "__spirv_GlobalInvocationId" Import |
| %5 = OpTypeInt 32 0 |
| %6 = OpTypeVector %5 3 |
| %7 = OpTypePointer UniformConstant %6 |
| %3 = OpVariable %7 UniformConstant |
| %8 = OpTypeVoid |
| %9 = OpTypeStruct %5 |
| %10 = OpTypePointer CrossWorkgroup %9 |
| %11 = OpTypeFunction %8 %10 |
| %12 = OpConstant %5 0 |
| %13 = OpTypePointer CrossWorkgroup %5 |
| %14 = OpConstant %5 42 |
| %2 = OpFunction %8 None %11 |
| %4 = OpFunctionParameter %10 |
| %15 = OpLabel |
| %16 = OpLoad %6 %3 Aligned 0 |
| %17 = OpCompositeExtract %5 %16 0 |
| %18 = OpInBoundsPtrAccessChain %13 %4 %17 %12 |
| OpStore %18 %14 Aligned 4 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpPtrAccessChainGood) { |
| std::string spirv = kOpenCLMemoryModel64 + R"( |
| OpEntryPoint Kernel %2 "another_kernel" |
| OpSource OpenCL_C 200000 |
| OpDecorate %3 BuiltIn GlobalInvocationId |
| OpDecorate %3 Constant |
| OpDecorate %4 FuncParamAttr NoCapture |
| OpDecorate %3 LinkageAttributes "__spirv_GlobalInvocationId" Import |
| %5 = OpTypeInt 64 0 |
| %6 = OpTypeVector %5 3 |
| %7 = OpTypePointer UniformConstant %6 |
| %3 = OpVariable %7 UniformConstant |
| %8 = OpTypeVoid |
| %9 = OpTypeInt 32 0 |
| %10 = OpTypeStruct %9 |
| %11 = OpTypePointer CrossWorkgroup %10 |
| %12 = OpTypeFunction %8 %11 |
| %13 = OpConstant %5 4294967295 |
| %14 = OpConstant %9 0 |
| %15 = OpTypePointer CrossWorkgroup %9 |
| %16 = OpConstant %9 42 |
| %2 = OpFunction %8 None %12 |
| %4 = OpFunctionParameter %11 |
| %17 = OpLabel |
| %18 = OpLoad %6 %3 Aligned 0 |
| %19 = OpCompositeExtract %5 %18 0 |
| %20 = OpBitwiseAnd %5 %19 %13 |
| %21 = OpPtrAccessChain %15 %4 %20 %14 |
| OpStore %21 %16 Aligned 4 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, StgBufOpPtrAccessChainGood) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VariablePointersStorageBuffer |
| OpExtension "SPV_KHR_variable_pointers" |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %3 "" |
| %int = OpTypeInt 32 0 |
| %int_2 = OpConstant %int 2 |
| %int_4 = OpConstant %int 4 |
| %struct = OpTypeStruct %int |
| %array = OpTypeArray %struct %int_4 |
| %ptr = OpTypePointer StorageBuffer %array |
| %var = OpVariable %ptr StorageBuffer |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpFunction %1 None %2 |
| %4 = OpLabel |
| %5 = OpPtrAccessChain %ptr %var %int_2 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpLoadBitcastPointerGood) { |
| std::string spirv = kOpenCLMemoryModel64 + R"( |
| %2 = OpTypeVoid |
| %3 = OpTypeInt 32 0 |
| %4 = OpTypeFloat 32 |
| %5 = OpTypePointer UniformConstant %3 |
| %6 = OpTypePointer UniformConstant %4 |
| %7 = OpVariable %5 UniformConstant |
| %8 = OpTypeFunction %2 |
| %9 = OpFunction %2 None %8 |
| %10 = OpLabel |
| %11 = OpBitcast %6 %7 |
| %12 = OpLoad %4 %11 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpLoadBitcastNonPointerBad) { |
| std::string spirv = kOpenCLMemoryModel64 + R"( |
| %2 = OpTypeVoid |
| %3 = OpTypeInt 32 0 |
| %4 = OpTypeFloat 32 |
| %5 = OpTypePointer UniformConstant %3 |
| %6 = OpTypeFunction %2 |
| %7 = OpVariable %5 UniformConstant |
| %8 = OpFunction %2 None %6 |
| %9 = OpLabel |
| %10 = OpLoad %3 %7 |
| %11 = OpBitcast %4 %10 |
| %12 = OpLoad %3 %11 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpLoad type for pointer <id> '11[%11]' is not a pointer " |
| "type.")); |
| } |
| TEST_F(ValidateIdWithMessage, OpStoreBitcastPointerGood) { |
| std::string spirv = kOpenCLMemoryModel64 + R"( |
| %2 = OpTypeVoid |
| %3 = OpTypeInt 32 0 |
| %4 = OpTypeFloat 32 |
| %5 = OpTypePointer Function %3 |
| %6 = OpTypePointer Function %4 |
| %7 = OpTypeFunction %2 |
| %8 = OpConstant %3 42 |
| %9 = OpFunction %2 None %7 |
| %10 = OpLabel |
| %11 = OpVariable %6 Function |
| %12 = OpBitcast %5 %11 |
| OpStore %12 %8 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| TEST_F(ValidateIdWithMessage, OpStoreBitcastNonPointerBad) { |
| std::string spirv = kOpenCLMemoryModel64 + R"( |
| %2 = OpTypeVoid |
| %3 = OpTypeInt 32 0 |
| %4 = OpTypeFloat 32 |
| %5 = OpTypePointer Function %4 |
| %6 = OpTypeFunction %2 |
| %7 = OpConstant %4 42 |
| %8 = OpFunction %2 None %6 |
| %9 = OpLabel |
| %10 = OpVariable %5 Function |
| %11 = OpBitcast %3 %7 |
| OpStore %11 %7 |
| OpReturn |
| OpFunctionEnd)"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("OpStore type for pointer <id> '11[%11]' is not a pointer " |
| "type.")); |
| } |
| |
| // Result <id> resulting from an instruction within a function may not be used |
| // outside that function. |
| TEST_F(ValidateIdWithMessage, ResultIdUsedOutsideOfFunctionBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeInt 32 0 |
| %4 = OpTypePointer Function %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| %7 = OpVariable %4 Function |
| OpReturn |
| OpFunctionEnd |
| %8 = OpFunction %1 None %2 |
| %9 = OpLabel |
| %10 = OpLoad %3 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "ID 7[%7] defined in block 6[%6] does not dominate its use in block " |
| "9[%9]")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, SpecIdTargetNotSpecializationConstant) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %1 SpecId 200 |
| %void = OpTypeVoid |
| %2 = OpTypeFunction %void |
| %int = OpTypeInt 32 0 |
| %1 = OpConstant %int 3 |
| %main = OpFunction %void None %2 |
| %4 = OpLabel |
| OpReturnValue %1 |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpDecorate SpecId decoration target <id> " |
| "'1[%uint_3]' is not a scalar specialization " |
| "constant.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, SpecIdTargetOpSpecConstantOpBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %1 SpecId 200 |
| %void = OpTypeVoid |
| %2 = OpTypeFunction %void |
| %int = OpTypeInt 32 0 |
| %3 = OpConstant %int 1 |
| %4 = OpConstant %int 2 |
| %1 = OpSpecConstantOp %int IAdd %3 %4 |
| %main = OpFunction %void None %2 |
| %6 = OpLabel |
| OpReturnValue %3 |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpDecorate SpecId decoration target <id> '1[%1]' is " |
| "not a scalar specialization constant.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, SpecIdTargetOpSpecConstantCompositeBad) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %1 SpecId 200 |
| %void = OpTypeVoid |
| %2 = OpTypeFunction %void |
| %int = OpTypeInt 32 0 |
| %3 = OpConstant %int 1 |
| %1 = OpSpecConstantComposite %int |
| %main = OpFunction %void None %2 |
| %4 = OpLabel |
| OpReturnValue %3 |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("OpDecorate SpecId decoration target <id> '1[%1]' is " |
| "not a scalar specialization constant.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, SpecIdTargetGood) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| OpDecorate %3 SpecId 200 |
| OpDecorate %4 SpecId 201 |
| OpDecorate %5 SpecId 202 |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %int = OpTypeInt 32 0 |
| %bool = OpTypeBool |
| %3 = OpSpecConstant %int 3 |
| %4 = OpSpecConstantTrue %bool |
| %5 = OpSpecConstantFalse %bool |
| %main = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_SUCCESS, ValidateAndRetrieveValidationState()); |
| } |
| |
| TEST_F(ValidateIdWithMessage, CorrectErrorForShuffle) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %uint = OpTypeInt 32 0 |
| %float = OpTypeFloat 32 |
| %v4float = OpTypeVector %float 4 |
| %v2float = OpTypeVector %float 2 |
| %void = OpTypeVoid |
| %548 = OpTypeFunction %void |
| %CS = OpFunction %void None %548 |
| %550 = OpLabel |
| %6275 = OpUndef %v2float |
| %6280 = OpUndef %v2float |
| %6282 = OpVectorShuffle %v4float %6275 %6280 0 1 4 5 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv.c_str()); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "Component index 4 is out of bounds for combined (Vector1 + Vector2) " |
| "size of 4.")); |
| EXPECT_EQ(25, getErrorPosition().index); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VoidStructMember) { |
| const std::string spirv = kGLSL450MemoryModel + R"( |
| %void = OpTypeVoid |
| %struct = OpTypeStruct %void |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Structures cannot contain a void type.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, TypeFunctionBadUse) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypePointer Function %2 |
| %4 = OpFunction %1 None %2 |
| %5 = OpLabel |
| OpReturn |
| OpFunctionEnd)"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Invalid use of function type result id 2[%2].")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, BadTypeId) { |
| std::string spirv = kGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpConstant %3 0 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| %7 = OpUndef %4 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("ID 4[%float_0] is not a type " |
| "id")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelLoadMakePointerVisibleGood) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 2 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| %9 = OpLoad %2 %4 NonPrivatePointerKHR|MakePointerVisibleKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelLoadMakePointerVisibleMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 2 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| %9 = OpLoad %2 %4 MakePointerVisibleKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerVisibleKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelLoadNonPrivatePointerBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Private %2 |
| %4 = OpVariable %3 Private |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 2 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| %9 = OpLoad %2 %4 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelLoadMakePointerAvailableCannotBeUsed) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 2 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| %9 = OpLoad %2 %4 NonPrivatePointerKHR|MakePointerAvailableKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("MakePointerAvailableKHR cannot be used with OpLoad")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelStoreMakePointerAvailableGood) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpVariable %3 Uniform |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 5 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| OpStore %4 %6 NonPrivatePointerKHR|MakePointerAvailableKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelStoreMakePointerAvailableMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpVariable %3 Uniform |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 5 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| OpStore %4 %6 MakePointerAvailableKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerAvailableKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelStoreNonPrivatePointerBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Output %2 |
| %4 = OpVariable %3 Output |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 5 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| OpStore %4 %6 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelStoreMakePointerVisibleCannotBeUsed) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability VulkanMemoryModelKHR |
| OpCapability Linkage |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Uniform %2 |
| %4 = OpVariable %3 Uniform |
| %5 = OpTypeFunction %1 |
| %6 = OpConstant %2 5 |
| %7 = OpFunction %1 None %5 |
| %8 = OpLabel |
| OpStore %4 %6 NonPrivatePointerKHR|MakePointerVisibleKHR %6 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("MakePointerVisibleKHR cannot be used with OpStore.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelCopyMemoryAvailable) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 NonPrivatePointerKHR|MakePointerAvailableKHR %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelCopyMemoryVisible) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 NonPrivatePointerKHR|MakePointerVisibleKHR %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelCopyMemoryAvailableAndVisible) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 NonPrivatePointerKHR|MakePointerAvailableKHR|MakePointerVisibleKHR %7 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemoryAvailableMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 MakePointerAvailableKHR %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerAvailableKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemoryVisibleMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 MakePointerVisibleKHR %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerVisibleKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemoryAvailableBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Output %2 |
| %4 = OpVariable %3 Output |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemoryVisibleBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Input %2 |
| %6 = OpVariable %5 Input |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemory %4 %6 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelCopyMemorySizedAvailable) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 NonPrivatePointerKHR|MakePointerAvailableKHR %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, VulkanMemoryModelCopyMemorySizedVisible) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 NonPrivatePointerKHR|MakePointerVisibleKHR %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemorySizedAvailableAndVisible) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 NonPrivatePointerKHR|MakePointerAvailableKHR|MakePointerVisibleKHR %7 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemorySizedAvailableMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 MakePointerAvailableKHR %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerAvailableKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemorySizedVisibleMissingNonPrivatePointer) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 MakePointerVisibleKHR %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR must be specified if " |
| "MakePointerVisibleKHR is specified.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemorySizedAvailableBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Output %2 |
| %4 = OpVariable %3 Output |
| %5 = OpTypePointer Uniform %2 |
| %6 = OpVariable %5 Uniform |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, |
| VulkanMemoryModelCopyMemorySizedVisibleBadStorageClass) { |
| std::string spirv = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpCapability Addresses |
| OpCapability VulkanMemoryModelKHR |
| OpExtension "SPV_KHR_vulkan_memory_model" |
| OpMemoryModel Logical VulkanKHR |
| %1 = OpTypeVoid |
| %2 = OpTypeInt 32 0 |
| %3 = OpTypePointer Workgroup %2 |
| %4 = OpVariable %3 Workgroup |
| %5 = OpTypePointer Input %2 |
| %6 = OpVariable %5 Input |
| %7 = OpConstant %2 2 |
| %8 = OpConstant %2 5 |
| %9 = OpTypeFunction %1 |
| %10 = OpFunction %1 None %9 |
| %11 = OpLabel |
| OpCopyMemorySized %4 %6 %7 NonPrivatePointerKHR |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("NonPrivatePointerKHR requires a pointer in Uniform, " |
| "Workgroup, CrossWorkgroup, Generic, Image or " |
| "StorageBuffer storage classes.")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock1) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| %7 = OpLabel |
| %8 = OpFunctionCall %3 %9 |
| OpUnreachable |
| OpFunctionEnd |
| %9 = OpFunction %3 None %4 |
| %10 = OpLabel |
| OpReturnValue %8 |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("ID 8[%8] defined in block 7[%7] does not dominate its " |
| "use in block 10[%10]\n %10 = OpLabel")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock2) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| %7 = OpLabel |
| %8 = OpFunctionCall %3 %9 |
| OpUnreachable |
| OpFunctionEnd |
| %9 = OpFunction %3 None %4 |
| %10 = OpLabel |
| OpReturnValue %8 |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("ID 8[%8] defined in block 7[%7] does not dominate its " |
| "use in block 10[%10]\n %10 = OpLabel")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock3) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| %7 = OpLabel |
| %8 = OpFunctionCall %3 %9 |
| OpReturn |
| OpFunctionEnd |
| %9 = OpFunction %3 None %4 |
| %10 = OpLabel |
| OpReturnValue %8 |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("ID 8[%8] defined in block 7[%7] does not dominate its " |
| "use in block 10[%10]\n %10 = OpLabel")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock4) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| %7 = OpLabel |
| %8 = OpUndef %3 |
| %9 = OpCopyObject %3 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock5) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpReturn |
| %7 = OpLabel |
| %8 = OpUndef %3 |
| OpBranch %9 |
| %9 = OpLabel |
| %10 = OpCopyObject %3 %8 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, IdDefInUnreachableBlock6) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| OpBranch %7 |
| %8 = OpLabel |
| %9 = OpUndef %3 |
| OpBranch %7 |
| %7 = OpLabel |
| %10 = OpCopyObject %3 %9 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("ID 9[%9] defined in block 8[%8] does not dominate its " |
| "use in block 7[%7]\n %7 = OpLabel")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, ReachableDefUnreachableUse) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %1 = OpTypeVoid |
| %2 = OpTypeFunction %1 |
| %3 = OpTypeFloat 32 |
| %4 = OpTypeFunction %3 |
| %5 = OpFunction %1 None %2 |
| %6 = OpLabel |
| %7 = OpUndef %3 |
| OpReturn |
| %8 = OpLabel |
| %9 = OpCopyObject %3 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| } |
| |
| TEST_F(ValidateIdWithMessage, UnreachableDefUsedInPhi) { |
| const std::string spirv = kNoKernelGLSL450MemoryModel + R"( |
| %void = OpTypeVoid |
| %3 = OpTypeFunction %void |
| %float = OpTypeFloat 32 |
| %bool = OpTypeBool |
| %6 = OpTypeFunction %float |
| %1 = OpFunction %void None %3 |
| %7 = OpLabel |
| %8 = OpUndef %bool |
| OpSelectionMerge %9 None |
| OpBranchConditional %8 %10 %9 |
| %10 = OpLabel |
| %11 = OpUndef %float |
| OpBranch %9 |
| %12 = OpLabel |
| %13 = OpUndef %float |
| OpUnreachable |
| %9 = OpLabel |
| %14 = OpPhi %float %11 %10 %13 %7 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("In OpPhi instruction 14[%14], ID 13[%13] definition does not " |
| "dominate its parent 7[%7]\n %14 = OpPhi %float %11 %10 %13 " |
| "%7")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeForwardPointerNotAPointerType) { |
| std::string spirv = R"( |
| OpCapability GenericPointer |
| OpCapability VariablePointersStorageBuffer |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Fragment %1 "main" |
| OpExecutionMode %1 OriginLowerLeft |
| OpTypeForwardPointer %2 CrossWorkgroup |
| %2 = OpTypeVoid |
| %3 = OpTypeFunction %2 |
| %1 = OpFunction %2 DontInline %3 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Pointer type in OpTypeForwardPointer is not a pointer " |
| "type.\n OpTypeForwardPointer %void CrossWorkgroup")); |
| } |
| |
| TEST_F(ValidateIdWithMessage, OpTypeForwardPointerWrongStorageClass) { |
| std::string spirv = R"( |
| OpCapability GenericPointer |
| OpCapability VariablePointersStorageBuffer |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint Fragment %1 "main" |
| OpExecutionMode %1 OriginLowerLeft |
| OpTypeForwardPointer %2 CrossWorkgroup |
| %int = OpTypeInt 32 1 |
| %2 = OpTypePointer Function %int |
| %void = OpTypeVoid |
| %3 = OpTypeFunction %void |
| %1 = OpFunction %void None %3 |
| %4 = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(spirv, SPV_ENV_UNIVERSAL_1_3); |
| EXPECT_EQ(SPV_ERROR_INVALID_ID, ValidateInstructions(SPV_ENV_UNIVERSAL_1_3)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("Storage class in OpTypeForwardPointer does not match the " |
| "pointer definition.\n OpTypeForwardPointer " |
| "%_ptr_Function_int CrossWorkgroup")); |
| } |
| } // namespace |
| } // namespace val |
| } // namespace spvtools |