| //===-- MipsISelLowering.cpp - Mips DAG Lowering Implementation -----------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file defines the interfaces that Mips uses to lower LLVM code into a | |
| // selection DAG. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #define DEBUG_TYPE "mips-lower" | |
| #include "MipsISelLowering.h" | |
| #include "MipsMachineFunction.h" | |
| #include "MipsTargetMachine.h" | |
| #include "MipsTargetObjectFile.h" | |
| #include "MipsSubtarget.h" | |
| #include "llvm/DerivedTypes.h" | |
| #include "llvm/Function.h" | |
| #include "llvm/GlobalVariable.h" | |
| #include "llvm/Intrinsics.h" | |
| #include "llvm/CallingConv.h" | |
| #include "InstPrinter/MipsInstPrinter.h" | |
| #include "llvm/CodeGen/CallingConvLower.h" | |
| #include "llvm/CodeGen/MachineFrameInfo.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/SelectionDAGISel.h" | |
| #include "llvm/CodeGen/ValueTypes.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| using namespace llvm; | |
| // If I is a shifted mask, set the size (Size) and the first bit of the | |
| // mask (Pos), and return true. | |
| // For example, if I is 0x003ff800, (Pos, Size) = (11, 11). | |
| static bool IsShiftedMask(uint64_t I, uint64_t &Pos, uint64_t &Size) { | |
| if (!isUInt<32>(I) || !isShiftedMask_32(I)) | |
| return false; | |
| Size = CountPopulation_32(I); | |
| Pos = CountTrailingZeros_32(I); | |
| return true; | |
| } | |
| const char *MipsTargetLowering::getTargetNodeName(unsigned Opcode) const { | |
| switch (Opcode) { | |
| case MipsISD::JmpLink: return "MipsISD::JmpLink"; | |
| case MipsISD::Hi: return "MipsISD::Hi"; | |
| case MipsISD::Lo: return "MipsISD::Lo"; | |
| case MipsISD::GPRel: return "MipsISD::GPRel"; | |
| case MipsISD::TlsGd: return "MipsISD::TlsGd"; | |
| case MipsISD::TprelHi: return "MipsISD::TprelHi"; | |
| case MipsISD::TprelLo: return "MipsISD::TprelLo"; | |
| case MipsISD::ThreadPointer: return "MipsISD::ThreadPointer"; | |
| case MipsISD::Ret: return "MipsISD::Ret"; | |
| case MipsISD::FPBrcond: return "MipsISD::FPBrcond"; | |
| case MipsISD::FPCmp: return "MipsISD::FPCmp"; | |
| case MipsISD::CMovFP_T: return "MipsISD::CMovFP_T"; | |
| case MipsISD::CMovFP_F: return "MipsISD::CMovFP_F"; | |
| case MipsISD::FPRound: return "MipsISD::FPRound"; | |
| case MipsISD::MAdd: return "MipsISD::MAdd"; | |
| case MipsISD::MAddu: return "MipsISD::MAddu"; | |
| case MipsISD::MSub: return "MipsISD::MSub"; | |
| case MipsISD::MSubu: return "MipsISD::MSubu"; | |
| case MipsISD::DivRem: return "MipsISD::DivRem"; | |
| case MipsISD::DivRemU: return "MipsISD::DivRemU"; | |
| case MipsISD::BuildPairF64: return "MipsISD::BuildPairF64"; | |
| case MipsISD::ExtractElementF64: return "MipsISD::ExtractElementF64"; | |
| case MipsISD::WrapperPIC: return "MipsISD::WrapperPIC"; | |
| case MipsISD::DynAlloc: return "MipsISD::DynAlloc"; | |
| case MipsISD::Sync: return "MipsISD::Sync"; | |
| case MipsISD::Ext: return "MipsISD::Ext"; | |
| case MipsISD::Ins: return "MipsISD::Ins"; | |
| default: return NULL; | |
| } | |
| } | |
| MipsTargetLowering:: | |
| MipsTargetLowering(MipsTargetMachine &TM) | |
| : TargetLowering(TM, new MipsTargetObjectFile()), | |
| Subtarget(&TM.getSubtarget<MipsSubtarget>()), | |
| HasMips64(Subtarget->hasMips64()), IsN64(Subtarget->isABI_N64()) { | |
| // Mips does not have i1 type, so use i32 for | |
| // setcc operations results (slt, sgt, ...). | |
| setBooleanContents(ZeroOrOneBooleanContent); | |
| setBooleanVectorContents(ZeroOrOneBooleanContent); // FIXME: Is this correct? | |
| // Set up the register classes | |
| addRegisterClass(MVT::i32, Mips::CPURegsRegisterClass); | |
| addRegisterClass(MVT::f32, Mips::FGR32RegisterClass); | |
| if (HasMips64) | |
| addRegisterClass(MVT::i64, Mips::CPU64RegsRegisterClass); | |
| // When dealing with single precision only, use libcalls | |
| if (!Subtarget->isSingleFloat()) { | |
| if (HasMips64) | |
| addRegisterClass(MVT::f64, Mips::FGR64RegisterClass); | |
| else | |
| addRegisterClass(MVT::f64, Mips::AFGR64RegisterClass); | |
| } | |
| // Load extented operations for i1 types must be promoted | |
| setLoadExtAction(ISD::EXTLOAD, MVT::i1, Promote); | |
| setLoadExtAction(ISD::ZEXTLOAD, MVT::i1, Promote); | |
| setLoadExtAction(ISD::SEXTLOAD, MVT::i1, Promote); | |
| // MIPS doesn't have extending float->double load/store | |
| setLoadExtAction(ISD::EXTLOAD, MVT::f32, Expand); | |
| setTruncStoreAction(MVT::f64, MVT::f32, Expand); | |
| // Used by legalize types to correctly generate the setcc result. | |
| // Without this, every float setcc comes with a AND/OR with the result, | |
| // we don't want this, since the fpcmp result goes to a flag register, | |
| // which is used implicitly by brcond and select operations. | |
| AddPromotedToType(ISD::SETCC, MVT::i1, MVT::i32); | |
| // Mips Custom Operations | |
| setOperationAction(ISD::GlobalAddress, MVT::i32, Custom); | |
| setOperationAction(ISD::GlobalAddress, MVT::i64, Custom); | |
| setOperationAction(ISD::BlockAddress, MVT::i32, Custom); | |
| setOperationAction(ISD::GlobalTLSAddress, MVT::i32, Custom); | |
| setOperationAction(ISD::JumpTable, MVT::i32, Custom); | |
| setOperationAction(ISD::ConstantPool, MVT::i32, Custom); | |
| setOperationAction(ISD::SELECT, MVT::f32, Custom); | |
| setOperationAction(ISD::SELECT, MVT::f64, Custom); | |
| setOperationAction(ISD::SELECT, MVT::i32, Custom); | |
| setOperationAction(ISD::BRCOND, MVT::Other, Custom); | |
| setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i32, Custom); | |
| setOperationAction(ISD::VASTART, MVT::Other, Custom); | |
| setOperationAction(ISD::SDIV, MVT::i32, Expand); | |
| setOperationAction(ISD::SREM, MVT::i32, Expand); | |
| setOperationAction(ISD::UDIV, MVT::i32, Expand); | |
| setOperationAction(ISD::UREM, MVT::i32, Expand); | |
| setOperationAction(ISD::SDIV, MVT::i64, Expand); | |
| setOperationAction(ISD::SREM, MVT::i64, Expand); | |
| setOperationAction(ISD::UDIV, MVT::i64, Expand); | |
| setOperationAction(ISD::UREM, MVT::i64, Expand); | |
| // Operations not directly supported by Mips. | |
| setOperationAction(ISD::BR_JT, MVT::Other, Expand); | |
| setOperationAction(ISD::BR_CC, MVT::Other, Expand); | |
| setOperationAction(ISD::SELECT_CC, MVT::Other, Expand); | |
| setOperationAction(ISD::UINT_TO_FP, MVT::i32, Expand); | |
| setOperationAction(ISD::FP_TO_UINT, MVT::i32, Expand); | |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1, Expand); | |
| setOperationAction(ISD::CTPOP, MVT::i32, Expand); | |
| setOperationAction(ISD::CTTZ, MVT::i32, Expand); | |
| setOperationAction(ISD::ROTL, MVT::i32, Expand); | |
| setOperationAction(ISD::ROTL, MVT::i64, Expand); | |
| if (!Subtarget->hasMips32r2()) | |
| setOperationAction(ISD::ROTR, MVT::i32, Expand); | |
| if (!Subtarget->hasMips64r2()) | |
| setOperationAction(ISD::ROTR, MVT::i64, Expand); | |
| setOperationAction(ISD::SHL_PARTS, MVT::i32, Expand); | |
| setOperationAction(ISD::SRA_PARTS, MVT::i32, Expand); | |
| setOperationAction(ISD::SRL_PARTS, MVT::i32, Expand); | |
| setOperationAction(ISD::FCOPYSIGN, MVT::f32, Custom); | |
| setOperationAction(ISD::FCOPYSIGN, MVT::f64, Custom); | |
| setOperationAction(ISD::FSIN, MVT::f32, Expand); | |
| setOperationAction(ISD::FSIN, MVT::f64, Expand); | |
| setOperationAction(ISD::FCOS, MVT::f32, Expand); | |
| setOperationAction(ISD::FCOS, MVT::f64, Expand); | |
| setOperationAction(ISD::FPOWI, MVT::f32, Expand); | |
| setOperationAction(ISD::FPOW, MVT::f32, Expand); | |
| setOperationAction(ISD::FPOW, MVT::f64, Expand); | |
| setOperationAction(ISD::FLOG, MVT::f32, Expand); | |
| setOperationAction(ISD::FLOG2, MVT::f32, Expand); | |
| setOperationAction(ISD::FLOG10, MVT::f32, Expand); | |
| setOperationAction(ISD::FEXP, MVT::f32, Expand); | |
| setOperationAction(ISD::FMA, MVT::f32, Expand); | |
| setOperationAction(ISD::FMA, MVT::f64, Expand); | |
| setOperationAction(ISD::EXCEPTIONADDR, MVT::i32, Expand); | |
| setOperationAction(ISD::EHSELECTION, MVT::i32, Expand); | |
| setOperationAction(ISD::VAARG, MVT::Other, Expand); | |
| setOperationAction(ISD::VACOPY, MVT::Other, Expand); | |
| setOperationAction(ISD::VAEND, MVT::Other, Expand); | |
| // Use the default for now | |
| setOperationAction(ISD::STACKSAVE, MVT::Other, Expand); | |
| setOperationAction(ISD::STACKRESTORE, MVT::Other, Expand); | |
| setOperationAction(ISD::MEMBARRIER, MVT::Other, Custom); | |
| setOperationAction(ISD::ATOMIC_FENCE, MVT::Other, Custom); | |
| setOperationAction(ISD::ATOMIC_LOAD, MVT::i32, Expand); | |
| setOperationAction(ISD::ATOMIC_STORE, MVT::i32, Expand); | |
| setInsertFencesForAtomic(true); | |
| if (Subtarget->isSingleFloat()) | |
| setOperationAction(ISD::SELECT_CC, MVT::f64, Expand); | |
| if (!Subtarget->hasSEInReg()) { | |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i8, Expand); | |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i16, Expand); | |
| } | |
| if (!Subtarget->hasBitCount()) | |
| setOperationAction(ISD::CTLZ, MVT::i32, Expand); | |
| if (!Subtarget->hasSwap()) | |
| setOperationAction(ISD::BSWAP, MVT::i32, Expand); | |
| setTargetDAGCombine(ISD::ADDE); | |
| setTargetDAGCombine(ISD::SUBE); | |
| setTargetDAGCombine(ISD::SDIVREM); | |
| setTargetDAGCombine(ISD::UDIVREM); | |
| setTargetDAGCombine(ISD::SETCC); | |
| setTargetDAGCombine(ISD::AND); | |
| setTargetDAGCombine(ISD::OR); | |
| setMinFunctionAlignment(2); | |
| setStackPointerRegisterToSaveRestore(Mips::SP); | |
| computeRegisterProperties(); | |
| setExceptionPointerRegister(Mips::A0); | |
| setExceptionSelectorRegister(Mips::A1); | |
| } | |
| bool MipsTargetLowering::allowsUnalignedMemoryAccesses(EVT VT) const { | |
| MVT::SimpleValueType SVT = VT.getSimpleVT().SimpleTy; | |
| return SVT == MVT::i64 || SVT == MVT::i32 || SVT == MVT::i16; | |
| } | |
| EVT MipsTargetLowering::getSetCCResultType(EVT VT) const { | |
| return MVT::i32; | |
| } | |
| // SelectMadd - | |
| // Transforms a subgraph in CurDAG if the following pattern is found: | |
| // (addc multLo, Lo0), (adde multHi, Hi0), | |
| // where, | |
| // multHi/Lo: product of multiplication | |
| // Lo0: initial value of Lo register | |
| // Hi0: initial value of Hi register | |
| // Return true if pattern matching was successful. | |
| static bool SelectMadd(SDNode* ADDENode, SelectionDAG* CurDAG) { | |
| // ADDENode's second operand must be a flag output of an ADDC node in order | |
| // for the matching to be successful. | |
| SDNode* ADDCNode = ADDENode->getOperand(2).getNode(); | |
| if (ADDCNode->getOpcode() != ISD::ADDC) | |
| return false; | |
| SDValue MultHi = ADDENode->getOperand(0); | |
| SDValue MultLo = ADDCNode->getOperand(0); | |
| SDNode* MultNode = MultHi.getNode(); | |
| unsigned MultOpc = MultHi.getOpcode(); | |
| // MultHi and MultLo must be generated by the same node, | |
| if (MultLo.getNode() != MultNode) | |
| return false; | |
| // and it must be a multiplication. | |
| if (MultOpc != ISD::SMUL_LOHI && MultOpc != ISD::UMUL_LOHI) | |
| return false; | |
| // MultLo amd MultHi must be the first and second output of MultNode | |
| // respectively. | |
| if (MultHi.getResNo() != 1 || MultLo.getResNo() != 0) | |
| return false; | |
| // Transform this to a MADD only if ADDENode and ADDCNode are the only users | |
| // of the values of MultNode, in which case MultNode will be removed in later | |
| // phases. | |
| // If there exist users other than ADDENode or ADDCNode, this function returns | |
| // here, which will result in MultNode being mapped to a single MULT | |
| // instruction node rather than a pair of MULT and MADD instructions being | |
| // produced. | |
| if (!MultHi.hasOneUse() || !MultLo.hasOneUse()) | |
| return false; | |
| SDValue Chain = CurDAG->getEntryNode(); | |
| DebugLoc dl = ADDENode->getDebugLoc(); | |
| // create MipsMAdd(u) node | |
| MultOpc = MultOpc == ISD::UMUL_LOHI ? MipsISD::MAddu : MipsISD::MAdd; | |
| SDValue MAdd = CurDAG->getNode(MultOpc, dl, | |
| MVT::Glue, | |
| MultNode->getOperand(0),// Factor 0 | |
| MultNode->getOperand(1),// Factor 1 | |
| ADDCNode->getOperand(1),// Lo0 | |
| ADDENode->getOperand(1));// Hi0 | |
| // create CopyFromReg nodes | |
| SDValue CopyFromLo = CurDAG->getCopyFromReg(Chain, dl, Mips::LO, MVT::i32, | |
| MAdd); | |
| SDValue CopyFromHi = CurDAG->getCopyFromReg(CopyFromLo.getValue(1), dl, | |
| Mips::HI, MVT::i32, | |
| CopyFromLo.getValue(2)); | |
| // replace uses of adde and addc here | |
| if (!SDValue(ADDCNode, 0).use_empty()) | |
| CurDAG->ReplaceAllUsesOfValueWith(SDValue(ADDCNode, 0), CopyFromLo); | |
| if (!SDValue(ADDENode, 0).use_empty()) | |
| CurDAG->ReplaceAllUsesOfValueWith(SDValue(ADDENode, 0), CopyFromHi); | |
| return true; | |
| } | |
| // SelectMsub - | |
| // Transforms a subgraph in CurDAG if the following pattern is found: | |
| // (addc Lo0, multLo), (sube Hi0, multHi), | |
| // where, | |
| // multHi/Lo: product of multiplication | |
| // Lo0: initial value of Lo register | |
| // Hi0: initial value of Hi register | |
| // Return true if pattern matching was successful. | |
| static bool SelectMsub(SDNode* SUBENode, SelectionDAG* CurDAG) { | |
| // SUBENode's second operand must be a flag output of an SUBC node in order | |
| // for the matching to be successful. | |
| SDNode* SUBCNode = SUBENode->getOperand(2).getNode(); | |
| if (SUBCNode->getOpcode() != ISD::SUBC) | |
| return false; | |
| SDValue MultHi = SUBENode->getOperand(1); | |
| SDValue MultLo = SUBCNode->getOperand(1); | |
| SDNode* MultNode = MultHi.getNode(); | |
| unsigned MultOpc = MultHi.getOpcode(); | |
| // MultHi and MultLo must be generated by the same node, | |
| if (MultLo.getNode() != MultNode) | |
| return false; | |
| // and it must be a multiplication. | |
| if (MultOpc != ISD::SMUL_LOHI && MultOpc != ISD::UMUL_LOHI) | |
| return false; | |
| // MultLo amd MultHi must be the first and second output of MultNode | |
| // respectively. | |
| if (MultHi.getResNo() != 1 || MultLo.getResNo() != 0) | |
| return false; | |
| // Transform this to a MSUB only if SUBENode and SUBCNode are the only users | |
| // of the values of MultNode, in which case MultNode will be removed in later | |
| // phases. | |
| // If there exist users other than SUBENode or SUBCNode, this function returns | |
| // here, which will result in MultNode being mapped to a single MULT | |
| // instruction node rather than a pair of MULT and MSUB instructions being | |
| // produced. | |
| if (!MultHi.hasOneUse() || !MultLo.hasOneUse()) | |
| return false; | |
| SDValue Chain = CurDAG->getEntryNode(); | |
| DebugLoc dl = SUBENode->getDebugLoc(); | |
| // create MipsSub(u) node | |
| MultOpc = MultOpc == ISD::UMUL_LOHI ? MipsISD::MSubu : MipsISD::MSub; | |
| SDValue MSub = CurDAG->getNode(MultOpc, dl, | |
| MVT::Glue, | |
| MultNode->getOperand(0),// Factor 0 | |
| MultNode->getOperand(1),// Factor 1 | |
| SUBCNode->getOperand(0),// Lo0 | |
| SUBENode->getOperand(0));// Hi0 | |
| // create CopyFromReg nodes | |
| SDValue CopyFromLo = CurDAG->getCopyFromReg(Chain, dl, Mips::LO, MVT::i32, | |
| MSub); | |
| SDValue CopyFromHi = CurDAG->getCopyFromReg(CopyFromLo.getValue(1), dl, | |
| Mips::HI, MVT::i32, | |
| CopyFromLo.getValue(2)); | |
| // replace uses of sube and subc here | |
| if (!SDValue(SUBCNode, 0).use_empty()) | |
| CurDAG->ReplaceAllUsesOfValueWith(SDValue(SUBCNode, 0), CopyFromLo); | |
| if (!SDValue(SUBENode, 0).use_empty()) | |
| CurDAG->ReplaceAllUsesOfValueWith(SDValue(SUBENode, 0), CopyFromHi); | |
| return true; | |
| } | |
| static SDValue PerformADDECombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| if (DCI.isBeforeLegalize()) | |
| return SDValue(); | |
| if (Subtarget->hasMips32() && SelectMadd(N, &DAG)) | |
| return SDValue(N, 0); | |
| return SDValue(); | |
| } | |
| static SDValue PerformSUBECombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| if (DCI.isBeforeLegalize()) | |
| return SDValue(); | |
| if (Subtarget->hasMips32() && SelectMsub(N, &DAG)) | |
| return SDValue(N, 0); | |
| return SDValue(); | |
| } | |
| static SDValue PerformDivRemCombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| if (DCI.isBeforeLegalizeOps()) | |
| return SDValue(); | |
| EVT Ty = N->getValueType(0); | |
| unsigned LO = (Ty == MVT::i32) ? Mips::LO : Mips::LO64; | |
| unsigned HI = (Ty == MVT::i32) ? Mips::HI : Mips::HI64; | |
| unsigned opc = N->getOpcode() == ISD::SDIVREM ? MipsISD::DivRem : | |
| MipsISD::DivRemU; | |
| DebugLoc dl = N->getDebugLoc(); | |
| SDValue DivRem = DAG.getNode(opc, dl, MVT::Glue, | |
| N->getOperand(0), N->getOperand(1)); | |
| SDValue InChain = DAG.getEntryNode(); | |
| SDValue InGlue = DivRem; | |
| // insert MFLO | |
| if (N->hasAnyUseOfValue(0)) { | |
| SDValue CopyFromLo = DAG.getCopyFromReg(InChain, dl, LO, Ty, | |
| InGlue); | |
| DAG.ReplaceAllUsesOfValueWith(SDValue(N, 0), CopyFromLo); | |
| InChain = CopyFromLo.getValue(1); | |
| InGlue = CopyFromLo.getValue(2); | |
| } | |
| // insert MFHI | |
| if (N->hasAnyUseOfValue(1)) { | |
| SDValue CopyFromHi = DAG.getCopyFromReg(InChain, dl, | |
| HI, Ty, InGlue); | |
| DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), CopyFromHi); | |
| } | |
| return SDValue(); | |
| } | |
| static Mips::CondCode FPCondCCodeToFCC(ISD::CondCode CC) { | |
| switch (CC) { | |
| default: llvm_unreachable("Unknown fp condition code!"); | |
| case ISD::SETEQ: | |
| case ISD::SETOEQ: return Mips::FCOND_OEQ; | |
| case ISD::SETUNE: return Mips::FCOND_UNE; | |
| case ISD::SETLT: | |
| case ISD::SETOLT: return Mips::FCOND_OLT; | |
| case ISD::SETGT: | |
| case ISD::SETOGT: return Mips::FCOND_OGT; | |
| case ISD::SETLE: | |
| case ISD::SETOLE: return Mips::FCOND_OLE; | |
| case ISD::SETGE: | |
| case ISD::SETOGE: return Mips::FCOND_OGE; | |
| case ISD::SETULT: return Mips::FCOND_ULT; | |
| case ISD::SETULE: return Mips::FCOND_ULE; | |
| case ISD::SETUGT: return Mips::FCOND_UGT; | |
| case ISD::SETUGE: return Mips::FCOND_UGE; | |
| case ISD::SETUO: return Mips::FCOND_UN; | |
| case ISD::SETO: return Mips::FCOND_OR; | |
| case ISD::SETNE: | |
| case ISD::SETONE: return Mips::FCOND_ONE; | |
| case ISD::SETUEQ: return Mips::FCOND_UEQ; | |
| } | |
| } | |
| // Returns true if condition code has to be inverted. | |
| static bool InvertFPCondCode(Mips::CondCode CC) { | |
| if (CC >= Mips::FCOND_F && CC <= Mips::FCOND_NGT) | |
| return false; | |
| if (CC >= Mips::FCOND_T && CC <= Mips::FCOND_GT) | |
| return true; | |
| assert(false && "Illegal Condition Code"); | |
| return false; | |
| } | |
| // Creates and returns an FPCmp node from a setcc node. | |
| // Returns Op if setcc is not a floating point comparison. | |
| static SDValue CreateFPCmp(SelectionDAG& DAG, const SDValue& Op) { | |
| // must be a SETCC node | |
| if (Op.getOpcode() != ISD::SETCC) | |
| return Op; | |
| SDValue LHS = Op.getOperand(0); | |
| if (!LHS.getValueType().isFloatingPoint()) | |
| return Op; | |
| SDValue RHS = Op.getOperand(1); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| // Assume the 3rd operand is a CondCodeSDNode. Add code to check the type of | |
| // node if necessary. | |
| ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(2))->get(); | |
| return DAG.getNode(MipsISD::FPCmp, dl, MVT::Glue, LHS, RHS, | |
| DAG.getConstant(FPCondCCodeToFCC(CC), MVT::i32)); | |
| } | |
| // Creates and returns a CMovFPT/F node. | |
| static SDValue CreateCMovFP(SelectionDAG& DAG, SDValue Cond, SDValue True, | |
| SDValue False, DebugLoc DL) { | |
| bool invert = InvertFPCondCode((Mips::CondCode) | |
| cast<ConstantSDNode>(Cond.getOperand(2)) | |
| ->getSExtValue()); | |
| return DAG.getNode((invert ? MipsISD::CMovFP_F : MipsISD::CMovFP_T), DL, | |
| True.getValueType(), True, False, Cond); | |
| } | |
| static SDValue PerformSETCCCombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| if (DCI.isBeforeLegalizeOps()) | |
| return SDValue(); | |
| SDValue Cond = CreateFPCmp(DAG, SDValue(N, 0)); | |
| if (Cond.getOpcode() != MipsISD::FPCmp) | |
| return SDValue(); | |
| SDValue True = DAG.getConstant(1, MVT::i32); | |
| SDValue False = DAG.getConstant(0, MVT::i32); | |
| return CreateCMovFP(DAG, Cond, True, False, N->getDebugLoc()); | |
| } | |
| static SDValue PerformANDCombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| // Pattern match EXT. | |
| // $dst = and ((sra or srl) $src , pos), (2**size - 1) | |
| // => ext $dst, $src, size, pos | |
| if (DCI.isBeforeLegalizeOps() || !Subtarget->hasMips32r2()) | |
| return SDValue(); | |
| SDValue ShiftRight = N->getOperand(0), Mask = N->getOperand(1); | |
| // Op's first operand must be a shift right. | |
| if (ShiftRight.getOpcode() != ISD::SRA && ShiftRight.getOpcode() != ISD::SRL) | |
| return SDValue(); | |
| // The second operand of the shift must be an immediate. | |
| uint64_t Pos; | |
| ConstantSDNode *CN; | |
| if (!(CN = dyn_cast<ConstantSDNode>(ShiftRight.getOperand(1)))) | |
| return SDValue(); | |
| Pos = CN->getZExtValue(); | |
| uint64_t SMPos, SMSize; | |
| // Op's second operand must be a shifted mask. | |
| if (!(CN = dyn_cast<ConstantSDNode>(Mask)) || | |
| !IsShiftedMask(CN->getZExtValue(), SMPos, SMSize)) | |
| return SDValue(); | |
| // Return if the shifted mask does not start at bit 0 or the sum of its size | |
| // and Pos exceeds the word's size. | |
| if (SMPos != 0 || Pos + SMSize > 32) | |
| return SDValue(); | |
| return DAG.getNode(MipsISD::Ext, N->getDebugLoc(), MVT::i32, | |
| ShiftRight.getOperand(0), | |
| DAG.getConstant(Pos, MVT::i32), | |
| DAG.getConstant(SMSize, MVT::i32)); | |
| } | |
| static SDValue PerformORCombine(SDNode *N, SelectionDAG& DAG, | |
| TargetLowering::DAGCombinerInfo &DCI, | |
| const MipsSubtarget* Subtarget) { | |
| // Pattern match INS. | |
| // $dst = or (and $src1 , mask0), (and (shl $src, pos), mask1), | |
| // where mask1 = (2**size - 1) << pos, mask0 = ~mask1 | |
| // => ins $dst, $src, size, pos, $src1 | |
| if (DCI.isBeforeLegalizeOps() || !Subtarget->hasMips32r2()) | |
| return SDValue(); | |
| SDValue And0 = N->getOperand(0), And1 = N->getOperand(1); | |
| uint64_t SMPos0, SMSize0, SMPos1, SMSize1; | |
| ConstantSDNode *CN; | |
| // See if Op's first operand matches (and $src1 , mask0). | |
| if (And0.getOpcode() != ISD::AND) | |
| return SDValue(); | |
| if (!(CN = dyn_cast<ConstantSDNode>(And0.getOperand(1))) || | |
| !IsShiftedMask(~CN->getSExtValue(), SMPos0, SMSize0)) | |
| return SDValue(); | |
| // See if Op's second operand matches (and (shl $src, pos), mask1). | |
| if (And1.getOpcode() != ISD::AND) | |
| return SDValue(); | |
| if (!(CN = dyn_cast<ConstantSDNode>(And1.getOperand(1))) || | |
| !IsShiftedMask(CN->getZExtValue(), SMPos1, SMSize1)) | |
| return SDValue(); | |
| // The shift masks must have the same position and size. | |
| if (SMPos0 != SMPos1 || SMSize0 != SMSize1) | |
| return SDValue(); | |
| SDValue Shl = And1.getOperand(0); | |
| if (Shl.getOpcode() != ISD::SHL) | |
| return SDValue(); | |
| if (!(CN = dyn_cast<ConstantSDNode>(Shl.getOperand(1)))) | |
| return SDValue(); | |
| unsigned Shamt = CN->getZExtValue(); | |
| // Return if the shift amount and the first bit position of mask are not the | |
| // same. | |
| if (Shamt != SMPos0) | |
| return SDValue(); | |
| return DAG.getNode(MipsISD::Ins, N->getDebugLoc(), MVT::i32, | |
| Shl.getOperand(0), | |
| DAG.getConstant(SMPos0, MVT::i32), | |
| DAG.getConstant(SMSize0, MVT::i32), | |
| And0.getOperand(0)); | |
| } | |
| SDValue MipsTargetLowering::PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) | |
| const { | |
| SelectionDAG &DAG = DCI.DAG; | |
| unsigned opc = N->getOpcode(); | |
| switch (opc) { | |
| default: break; | |
| case ISD::ADDE: | |
| return PerformADDECombine(N, DAG, DCI, Subtarget); | |
| case ISD::SUBE: | |
| return PerformSUBECombine(N, DAG, DCI, Subtarget); | |
| case ISD::SDIVREM: | |
| case ISD::UDIVREM: | |
| return PerformDivRemCombine(N, DAG, DCI, Subtarget); | |
| case ISD::SETCC: | |
| return PerformSETCCCombine(N, DAG, DCI, Subtarget); | |
| case ISD::AND: | |
| return PerformANDCombine(N, DAG, DCI, Subtarget); | |
| case ISD::OR: | |
| return PerformORCombine(N, DAG, DCI, Subtarget); | |
| } | |
| return SDValue(); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerOperation(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| switch (Op.getOpcode()) | |
| { | |
| case ISD::BRCOND: return LowerBRCOND(Op, DAG); | |
| case ISD::ConstantPool: return LowerConstantPool(Op, DAG); | |
| case ISD::DYNAMIC_STACKALLOC: return LowerDYNAMIC_STACKALLOC(Op, DAG); | |
| case ISD::GlobalAddress: return LowerGlobalAddress(Op, DAG); | |
| case ISD::BlockAddress: return LowerBlockAddress(Op, DAG); | |
| case ISD::GlobalTLSAddress: return LowerGlobalTLSAddress(Op, DAG); | |
| case ISD::JumpTable: return LowerJumpTable(Op, DAG); | |
| case ISD::SELECT: return LowerSELECT(Op, DAG); | |
| case ISD::VASTART: return LowerVASTART(Op, DAG); | |
| case ISD::FCOPYSIGN: return LowerFCOPYSIGN(Op, DAG); | |
| case ISD::FRAMEADDR: return LowerFRAMEADDR(Op, DAG); | |
| case ISD::MEMBARRIER: return LowerMEMBARRIER(Op, DAG); | |
| case ISD::ATOMIC_FENCE: return LowerATOMIC_FENCE(Op, DAG); | |
| } | |
| return SDValue(); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Lower helper functions | |
| //===----------------------------------------------------------------------===// | |
| // AddLiveIn - This helper function adds the specified physical register to the | |
| // MachineFunction as a live in value. It also creates a corresponding | |
| // virtual register for it. | |
| static unsigned | |
| AddLiveIn(MachineFunction &MF, unsigned PReg, TargetRegisterClass *RC) | |
| { | |
| assert(RC->contains(PReg) && "Not the correct regclass!"); | |
| unsigned VReg = MF.getRegInfo().createVirtualRegister(RC); | |
| MF.getRegInfo().addLiveIn(PReg, VReg); | |
| return VReg; | |
| } | |
| // Get fp branch code (not opcode) from condition code. | |
| static Mips::FPBranchCode GetFPBranchCodeFromCond(Mips::CondCode CC) { | |
| if (CC >= Mips::FCOND_F && CC <= Mips::FCOND_NGT) | |
| return Mips::BRANCH_T; | |
| if (CC >= Mips::FCOND_T && CC <= Mips::FCOND_GT) | |
| return Mips::BRANCH_F; | |
| return Mips::BRANCH_INVALID; | |
| } | |
| static MachineBasicBlock* ExpandCondMov(MachineInstr *MI, MachineBasicBlock *BB, | |
| DebugLoc dl, | |
| const MipsSubtarget* Subtarget, | |
| const TargetInstrInfo *TII, | |
| bool isFPCmp, unsigned Opc) { | |
| // There is no need to expand CMov instructions if target has | |
| // conditional moves. | |
| if (Subtarget->hasCondMov()) | |
| return BB; | |
| // To "insert" a SELECT_CC instruction, we actually have to insert the | |
| // diamond control-flow pattern. The incoming instruction knows the | |
| // destination vreg to set, the condition code register to branch on, the | |
| // true/false values to select between, and a branch opcode to use. | |
| const BasicBlock *LLVM_BB = BB->getBasicBlock(); | |
| MachineFunction::iterator It = BB; | |
| ++It; | |
| // thisMBB: | |
| // ... | |
| // TrueVal = ... | |
| // setcc r1, r2, r3 | |
| // bNE r1, r0, copy1MBB | |
| // fallthrough --> copy0MBB | |
| MachineBasicBlock *thisMBB = BB; | |
| MachineFunction *F = BB->getParent(); | |
| MachineBasicBlock *copy0MBB = F->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *sinkMBB = F->CreateMachineBasicBlock(LLVM_BB); | |
| F->insert(It, copy0MBB); | |
| F->insert(It, sinkMBB); | |
| // Transfer the remainder of BB and its successor edges to sinkMBB. | |
| sinkMBB->splice(sinkMBB->begin(), BB, | |
| llvm::next(MachineBasicBlock::iterator(MI)), | |
| BB->end()); | |
| sinkMBB->transferSuccessorsAndUpdatePHIs(BB); | |
| // Next, add the true and fallthrough blocks as its successors. | |
| BB->addSuccessor(copy0MBB); | |
| BB->addSuccessor(sinkMBB); | |
| // Emit the right instruction according to the type of the operands compared | |
| if (isFPCmp) | |
| BuildMI(BB, dl, TII->get(Opc)).addMBB(sinkMBB); | |
| else | |
| BuildMI(BB, dl, TII->get(Opc)).addReg(MI->getOperand(2).getReg()) | |
| .addReg(Mips::ZERO).addMBB(sinkMBB); | |
| // copy0MBB: | |
| // %FalseValue = ... | |
| // # fallthrough to sinkMBB | |
| BB = copy0MBB; | |
| // Update machine-CFG edges | |
| BB->addSuccessor(sinkMBB); | |
| // sinkMBB: | |
| // %Result = phi [ %TrueValue, thisMBB ], [ %FalseValue, copy0MBB ] | |
| // ... | |
| BB = sinkMBB; | |
| if (isFPCmp) | |
| BuildMI(*BB, BB->begin(), dl, | |
| TII->get(Mips::PHI), MI->getOperand(0).getReg()) | |
| .addReg(MI->getOperand(2).getReg()).addMBB(thisMBB) | |
| .addReg(MI->getOperand(1).getReg()).addMBB(copy0MBB); | |
| else | |
| BuildMI(*BB, BB->begin(), dl, | |
| TII->get(Mips::PHI), MI->getOperand(0).getReg()) | |
| .addReg(MI->getOperand(3).getReg()).addMBB(thisMBB) | |
| .addReg(MI->getOperand(1).getReg()).addMBB(copy0MBB); | |
| MI->eraseFromParent(); // The pseudo instruction is gone now. | |
| return BB; | |
| } | |
| MachineBasicBlock * | |
| MipsTargetLowering::EmitInstrWithCustomInserter(MachineInstr *MI, | |
| MachineBasicBlock *BB) const { | |
| const TargetInstrInfo *TII = getTargetMachine().getInstrInfo(); | |
| DebugLoc dl = MI->getDebugLoc(); | |
| switch (MI->getOpcode()) { | |
| default: | |
| assert(false && "Unexpected instr type to insert"); | |
| return NULL; | |
| case Mips::MOVT: | |
| case Mips::MOVT_S: | |
| case Mips::MOVT_D: | |
| return ExpandCondMov(MI, BB, dl, Subtarget, TII, true, Mips::BC1F); | |
| case Mips::MOVF: | |
| case Mips::MOVF_S: | |
| case Mips::MOVF_D: | |
| return ExpandCondMov(MI, BB, dl, Subtarget, TII, true, Mips::BC1T); | |
| case Mips::MOVZ_I: | |
| case Mips::MOVZ_S: | |
| case Mips::MOVZ_D: | |
| return ExpandCondMov(MI, BB, dl, Subtarget, TII, false, Mips::BNE); | |
| case Mips::MOVN_I: | |
| case Mips::MOVN_S: | |
| case Mips::MOVN_D: | |
| return ExpandCondMov(MI, BB, dl, Subtarget, TII, false, Mips::BEQ); | |
| case Mips::ATOMIC_LOAD_ADD_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, Mips::ADDu); | |
| case Mips::ATOMIC_LOAD_ADD_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, Mips::ADDu); | |
| case Mips::ATOMIC_LOAD_ADD_I32: | |
| return EmitAtomicBinary(MI, BB, 4, Mips::ADDu); | |
| case Mips::ATOMIC_LOAD_AND_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, Mips::AND); | |
| case Mips::ATOMIC_LOAD_AND_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, Mips::AND); | |
| case Mips::ATOMIC_LOAD_AND_I32: | |
| return EmitAtomicBinary(MI, BB, 4, Mips::AND); | |
| case Mips::ATOMIC_LOAD_OR_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, Mips::OR); | |
| case Mips::ATOMIC_LOAD_OR_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, Mips::OR); | |
| case Mips::ATOMIC_LOAD_OR_I32: | |
| return EmitAtomicBinary(MI, BB, 4, Mips::OR); | |
| case Mips::ATOMIC_LOAD_XOR_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, Mips::XOR); | |
| case Mips::ATOMIC_LOAD_XOR_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, Mips::XOR); | |
| case Mips::ATOMIC_LOAD_XOR_I32: | |
| return EmitAtomicBinary(MI, BB, 4, Mips::XOR); | |
| case Mips::ATOMIC_LOAD_NAND_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, 0, true); | |
| case Mips::ATOMIC_LOAD_NAND_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, 0, true); | |
| case Mips::ATOMIC_LOAD_NAND_I32: | |
| return EmitAtomicBinary(MI, BB, 4, 0, true); | |
| case Mips::ATOMIC_LOAD_SUB_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, Mips::SUBu); | |
| case Mips::ATOMIC_LOAD_SUB_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, Mips::SUBu); | |
| case Mips::ATOMIC_LOAD_SUB_I32: | |
| return EmitAtomicBinary(MI, BB, 4, Mips::SUBu); | |
| case Mips::ATOMIC_SWAP_I8: | |
| return EmitAtomicBinaryPartword(MI, BB, 1, 0); | |
| case Mips::ATOMIC_SWAP_I16: | |
| return EmitAtomicBinaryPartword(MI, BB, 2, 0); | |
| case Mips::ATOMIC_SWAP_I32: | |
| return EmitAtomicBinary(MI, BB, 4, 0); | |
| case Mips::ATOMIC_CMP_SWAP_I8: | |
| return EmitAtomicCmpSwapPartword(MI, BB, 1); | |
| case Mips::ATOMIC_CMP_SWAP_I16: | |
| return EmitAtomicCmpSwapPartword(MI, BB, 2); | |
| case Mips::ATOMIC_CMP_SWAP_I32: | |
| return EmitAtomicCmpSwap(MI, BB, 4); | |
| } | |
| } | |
| // This function also handles Mips::ATOMIC_SWAP_I32 (when BinOpcode == 0), and | |
| // Mips::ATOMIC_LOAD_NAND_I32 (when Nand == true) | |
| MachineBasicBlock * | |
| MipsTargetLowering::EmitAtomicBinary(MachineInstr *MI, MachineBasicBlock *BB, | |
| unsigned Size, unsigned BinOpcode, | |
| bool Nand) const { | |
| assert(Size == 4 && "Unsupported size for EmitAtomicBinary."); | |
| MachineFunction *MF = BB->getParent(); | |
| MachineRegisterInfo &RegInfo = MF->getRegInfo(); | |
| const TargetRegisterClass *RC = getRegClassFor(MVT::i32); | |
| const TargetInstrInfo *TII = getTargetMachine().getInstrInfo(); | |
| DebugLoc dl = MI->getDebugLoc(); | |
| unsigned OldVal = MI->getOperand(0).getReg(); | |
| unsigned Ptr = MI->getOperand(1).getReg(); | |
| unsigned Incr = MI->getOperand(2).getReg(); | |
| unsigned StoreVal = RegInfo.createVirtualRegister(RC); | |
| unsigned AndRes = RegInfo.createVirtualRegister(RC); | |
| unsigned Success = RegInfo.createVirtualRegister(RC); | |
| // insert new blocks after the current block | |
| const BasicBlock *LLVM_BB = BB->getBasicBlock(); | |
| MachineBasicBlock *loopMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *exitMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineFunction::iterator It = BB; | |
| ++It; | |
| MF->insert(It, loopMBB); | |
| MF->insert(It, exitMBB); | |
| // Transfer the remainder of BB and its successor edges to exitMBB. | |
| exitMBB->splice(exitMBB->begin(), BB, | |
| llvm::next(MachineBasicBlock::iterator(MI)), | |
| BB->end()); | |
| exitMBB->transferSuccessorsAndUpdatePHIs(BB); | |
| // thisMBB: | |
| // ... | |
| // fallthrough --> loopMBB | |
| BB->addSuccessor(loopMBB); | |
| loopMBB->addSuccessor(loopMBB); | |
| loopMBB->addSuccessor(exitMBB); | |
| // loopMBB: | |
| // ll oldval, 0(ptr) | |
| // <binop> storeval, oldval, incr | |
| // sc success, storeval, 0(ptr) | |
| // beq success, $0, loopMBB | |
| BB = loopMBB; | |
| BuildMI(BB, dl, TII->get(Mips::LL), OldVal).addReg(Ptr).addImm(0); | |
| if (Nand) { | |
| // and andres, oldval, incr | |
| // nor storeval, $0, andres | |
| BuildMI(BB, dl, TII->get(Mips::AND), AndRes).addReg(OldVal).addReg(Incr); | |
| BuildMI(BB, dl, TII->get(Mips::NOR), StoreVal) | |
| .addReg(Mips::ZERO).addReg(AndRes); | |
| } else if (BinOpcode) { | |
| // <binop> storeval, oldval, incr | |
| BuildMI(BB, dl, TII->get(BinOpcode), StoreVal).addReg(OldVal).addReg(Incr); | |
| } else { | |
| StoreVal = Incr; | |
| } | |
| BuildMI(BB, dl, TII->get(Mips::SC), Success) | |
| .addReg(StoreVal).addReg(Ptr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::BEQ)) | |
| .addReg(Success).addReg(Mips::ZERO).addMBB(loopMBB); | |
| MI->eraseFromParent(); // The instruction is gone now. | |
| return exitMBB; | |
| } | |
| MachineBasicBlock * | |
| MipsTargetLowering::EmitAtomicBinaryPartword(MachineInstr *MI, | |
| MachineBasicBlock *BB, | |
| unsigned Size, unsigned BinOpcode, | |
| bool Nand) const { | |
| assert((Size == 1 || Size == 2) && | |
| "Unsupported size for EmitAtomicBinaryPartial."); | |
| MachineFunction *MF = BB->getParent(); | |
| MachineRegisterInfo &RegInfo = MF->getRegInfo(); | |
| const TargetRegisterClass *RC = getRegClassFor(MVT::i32); | |
| const TargetInstrInfo *TII = getTargetMachine().getInstrInfo(); | |
| DebugLoc dl = MI->getDebugLoc(); | |
| unsigned Dest = MI->getOperand(0).getReg(); | |
| unsigned Ptr = MI->getOperand(1).getReg(); | |
| unsigned Incr = MI->getOperand(2).getReg(); | |
| unsigned AlignedAddr = RegInfo.createVirtualRegister(RC); | |
| unsigned ShiftAmt = RegInfo.createVirtualRegister(RC); | |
| unsigned Mask = RegInfo.createVirtualRegister(RC); | |
| unsigned Mask2 = RegInfo.createVirtualRegister(RC); | |
| unsigned NewVal = RegInfo.createVirtualRegister(RC); | |
| unsigned OldVal = RegInfo.createVirtualRegister(RC); | |
| unsigned Incr2 = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskLSB2 = RegInfo.createVirtualRegister(RC); | |
| unsigned PtrLSB2 = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskUpper = RegInfo.createVirtualRegister(RC); | |
| unsigned AndRes = RegInfo.createVirtualRegister(RC); | |
| unsigned BinOpRes = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedOldVal0 = RegInfo.createVirtualRegister(RC); | |
| unsigned StoreVal = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedOldVal1 = RegInfo.createVirtualRegister(RC); | |
| unsigned SrlRes = RegInfo.createVirtualRegister(RC); | |
| unsigned SllRes = RegInfo.createVirtualRegister(RC); | |
| unsigned Success = RegInfo.createVirtualRegister(RC); | |
| // insert new blocks after the current block | |
| const BasicBlock *LLVM_BB = BB->getBasicBlock(); | |
| MachineBasicBlock *loopMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *sinkMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *exitMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineFunction::iterator It = BB; | |
| ++It; | |
| MF->insert(It, loopMBB); | |
| MF->insert(It, sinkMBB); | |
| MF->insert(It, exitMBB); | |
| // Transfer the remainder of BB and its successor edges to exitMBB. | |
| exitMBB->splice(exitMBB->begin(), BB, | |
| llvm::next(MachineBasicBlock::iterator(MI)), | |
| BB->end()); | |
| exitMBB->transferSuccessorsAndUpdatePHIs(BB); | |
| BB->addSuccessor(loopMBB); | |
| loopMBB->addSuccessor(loopMBB); | |
| loopMBB->addSuccessor(sinkMBB); | |
| sinkMBB->addSuccessor(exitMBB); | |
| // thisMBB: | |
| // addiu masklsb2,$0,-4 # 0xfffffffc | |
| // and alignedaddr,ptr,masklsb2 | |
| // andi ptrlsb2,ptr,3 | |
| // sll shiftamt,ptrlsb2,3 | |
| // ori maskupper,$0,255 # 0xff | |
| // sll mask,maskupper,shiftamt | |
| // nor mask2,$0,mask | |
| // sll incr2,incr,shiftamt | |
| int64_t MaskImm = (Size == 1) ? 255 : 65535; | |
| BuildMI(BB, dl, TII->get(Mips::ADDiu), MaskLSB2) | |
| .addReg(Mips::ZERO).addImm(-4); | |
| BuildMI(BB, dl, TII->get(Mips::AND), AlignedAddr) | |
| .addReg(Ptr).addReg(MaskLSB2); | |
| BuildMI(BB, dl, TII->get(Mips::ANDi), PtrLSB2).addReg(Ptr).addImm(3); | |
| BuildMI(BB, dl, TII->get(Mips::SLL), ShiftAmt).addReg(PtrLSB2).addImm(3); | |
| BuildMI(BB, dl, TII->get(Mips::ORi), MaskUpper) | |
| .addReg(Mips::ZERO).addImm(MaskImm); | |
| BuildMI(BB, dl, TII->get(Mips::SLLV), Mask) | |
| .addReg(ShiftAmt).addReg(MaskUpper); | |
| BuildMI(BB, dl, TII->get(Mips::NOR), Mask2).addReg(Mips::ZERO).addReg(Mask); | |
| BuildMI(BB, dl, TII->get(Mips::SLLV), Incr2).addReg(ShiftAmt).addReg(Incr); | |
| // atomic.load.binop | |
| // loopMBB: | |
| // ll oldval,0(alignedaddr) | |
| // binop binopres,oldval,incr2 | |
| // and newval,binopres,mask | |
| // and maskedoldval0,oldval,mask2 | |
| // or storeval,maskedoldval0,newval | |
| // sc success,storeval,0(alignedaddr) | |
| // beq success,$0,loopMBB | |
| // atomic.swap | |
| // loopMBB: | |
| // ll oldval,0(alignedaddr) | |
| // and newval,incr2,mask | |
| // and maskedoldval0,oldval,mask2 | |
| // or storeval,maskedoldval0,newval | |
| // sc success,storeval,0(alignedaddr) | |
| // beq success,$0,loopMBB | |
| BB = loopMBB; | |
| BuildMI(BB, dl, TII->get(Mips::LL), OldVal).addReg(AlignedAddr).addImm(0); | |
| if (Nand) { | |
| // and andres, oldval, incr2 | |
| // nor binopres, $0, andres | |
| // and newval, binopres, mask | |
| BuildMI(BB, dl, TII->get(Mips::AND), AndRes).addReg(OldVal).addReg(Incr2); | |
| BuildMI(BB, dl, TII->get(Mips::NOR), BinOpRes) | |
| .addReg(Mips::ZERO).addReg(AndRes); | |
| BuildMI(BB, dl, TII->get(Mips::AND), NewVal).addReg(BinOpRes).addReg(Mask); | |
| } else if (BinOpcode) { | |
| // <binop> binopres, oldval, incr2 | |
| // and newval, binopres, mask | |
| BuildMI(BB, dl, TII->get(BinOpcode), BinOpRes).addReg(OldVal).addReg(Incr2); | |
| BuildMI(BB, dl, TII->get(Mips::AND), NewVal).addReg(BinOpRes).addReg(Mask); | |
| } else {// atomic.swap | |
| // and newval, incr2, mask | |
| BuildMI(BB, dl, TII->get(Mips::AND), NewVal).addReg(Incr2).addReg(Mask); | |
| } | |
| BuildMI(BB, dl, TII->get(Mips::AND), MaskedOldVal0) | |
| .addReg(OldVal).addReg(Mask2); | |
| BuildMI(BB, dl, TII->get(Mips::OR), StoreVal) | |
| .addReg(MaskedOldVal0).addReg(NewVal); | |
| BuildMI(BB, dl, TII->get(Mips::SC), Success) | |
| .addReg(StoreVal).addReg(AlignedAddr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::BEQ)) | |
| .addReg(Success).addReg(Mips::ZERO).addMBB(loopMBB); | |
| // sinkMBB: | |
| // and maskedoldval1,oldval,mask | |
| // srl srlres,maskedoldval1,shiftamt | |
| // sll sllres,srlres,24 | |
| // sra dest,sllres,24 | |
| BB = sinkMBB; | |
| int64_t ShiftImm = (Size == 1) ? 24 : 16; | |
| BuildMI(BB, dl, TII->get(Mips::AND), MaskedOldVal1) | |
| .addReg(OldVal).addReg(Mask); | |
| BuildMI(BB, dl, TII->get(Mips::SRLV), SrlRes) | |
| .addReg(ShiftAmt).addReg(MaskedOldVal1); | |
| BuildMI(BB, dl, TII->get(Mips::SLL), SllRes) | |
| .addReg(SrlRes).addImm(ShiftImm); | |
| BuildMI(BB, dl, TII->get(Mips::SRA), Dest) | |
| .addReg(SllRes).addImm(ShiftImm); | |
| MI->eraseFromParent(); // The instruction is gone now. | |
| return exitMBB; | |
| } | |
| MachineBasicBlock * | |
| MipsTargetLowering::EmitAtomicCmpSwap(MachineInstr *MI, | |
| MachineBasicBlock *BB, | |
| unsigned Size) const { | |
| assert(Size == 4 && "Unsupported size for EmitAtomicCmpSwap."); | |
| MachineFunction *MF = BB->getParent(); | |
| MachineRegisterInfo &RegInfo = MF->getRegInfo(); | |
| const TargetRegisterClass *RC = getRegClassFor(MVT::i32); | |
| const TargetInstrInfo *TII = getTargetMachine().getInstrInfo(); | |
| DebugLoc dl = MI->getDebugLoc(); | |
| unsigned Dest = MI->getOperand(0).getReg(); | |
| unsigned Ptr = MI->getOperand(1).getReg(); | |
| unsigned OldVal = MI->getOperand(2).getReg(); | |
| unsigned NewVal = MI->getOperand(3).getReg(); | |
| unsigned Success = RegInfo.createVirtualRegister(RC); | |
| // insert new blocks after the current block | |
| const BasicBlock *LLVM_BB = BB->getBasicBlock(); | |
| MachineBasicBlock *loop1MBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *loop2MBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *exitMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineFunction::iterator It = BB; | |
| ++It; | |
| MF->insert(It, loop1MBB); | |
| MF->insert(It, loop2MBB); | |
| MF->insert(It, exitMBB); | |
| // Transfer the remainder of BB and its successor edges to exitMBB. | |
| exitMBB->splice(exitMBB->begin(), BB, | |
| llvm::next(MachineBasicBlock::iterator(MI)), | |
| BB->end()); | |
| exitMBB->transferSuccessorsAndUpdatePHIs(BB); | |
| // thisMBB: | |
| // ... | |
| // fallthrough --> loop1MBB | |
| BB->addSuccessor(loop1MBB); | |
| loop1MBB->addSuccessor(exitMBB); | |
| loop1MBB->addSuccessor(loop2MBB); | |
| loop2MBB->addSuccessor(loop1MBB); | |
| loop2MBB->addSuccessor(exitMBB); | |
| // loop1MBB: | |
| // ll dest, 0(ptr) | |
| // bne dest, oldval, exitMBB | |
| BB = loop1MBB; | |
| BuildMI(BB, dl, TII->get(Mips::LL), Dest).addReg(Ptr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::BNE)) | |
| .addReg(Dest).addReg(OldVal).addMBB(exitMBB); | |
| // loop2MBB: | |
| // sc success, newval, 0(ptr) | |
| // beq success, $0, loop1MBB | |
| BB = loop2MBB; | |
| BuildMI(BB, dl, TII->get(Mips::SC), Success) | |
| .addReg(NewVal).addReg(Ptr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::BEQ)) | |
| .addReg(Success).addReg(Mips::ZERO).addMBB(loop1MBB); | |
| MI->eraseFromParent(); // The instruction is gone now. | |
| return exitMBB; | |
| } | |
| MachineBasicBlock * | |
| MipsTargetLowering::EmitAtomicCmpSwapPartword(MachineInstr *MI, | |
| MachineBasicBlock *BB, | |
| unsigned Size) const { | |
| assert((Size == 1 || Size == 2) && | |
| "Unsupported size for EmitAtomicCmpSwapPartial."); | |
| MachineFunction *MF = BB->getParent(); | |
| MachineRegisterInfo &RegInfo = MF->getRegInfo(); | |
| const TargetRegisterClass *RC = getRegClassFor(MVT::i32); | |
| const TargetInstrInfo *TII = getTargetMachine().getInstrInfo(); | |
| DebugLoc dl = MI->getDebugLoc(); | |
| unsigned Dest = MI->getOperand(0).getReg(); | |
| unsigned Ptr = MI->getOperand(1).getReg(); | |
| unsigned CmpVal = MI->getOperand(2).getReg(); | |
| unsigned NewVal = MI->getOperand(3).getReg(); | |
| unsigned AlignedAddr = RegInfo.createVirtualRegister(RC); | |
| unsigned ShiftAmt = RegInfo.createVirtualRegister(RC); | |
| unsigned Mask = RegInfo.createVirtualRegister(RC); | |
| unsigned Mask2 = RegInfo.createVirtualRegister(RC); | |
| unsigned ShiftedCmpVal = RegInfo.createVirtualRegister(RC); | |
| unsigned OldVal = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedOldVal0 = RegInfo.createVirtualRegister(RC); | |
| unsigned ShiftedNewVal = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskLSB2 = RegInfo.createVirtualRegister(RC); | |
| unsigned PtrLSB2 = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskUpper = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedCmpVal = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedNewVal = RegInfo.createVirtualRegister(RC); | |
| unsigned MaskedOldVal1 = RegInfo.createVirtualRegister(RC); | |
| unsigned StoreVal = RegInfo.createVirtualRegister(RC); | |
| unsigned SrlRes = RegInfo.createVirtualRegister(RC); | |
| unsigned SllRes = RegInfo.createVirtualRegister(RC); | |
| unsigned Success = RegInfo.createVirtualRegister(RC); | |
| // insert new blocks after the current block | |
| const BasicBlock *LLVM_BB = BB->getBasicBlock(); | |
| MachineBasicBlock *loop1MBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *loop2MBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *sinkMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineBasicBlock *exitMBB = MF->CreateMachineBasicBlock(LLVM_BB); | |
| MachineFunction::iterator It = BB; | |
| ++It; | |
| MF->insert(It, loop1MBB); | |
| MF->insert(It, loop2MBB); | |
| MF->insert(It, sinkMBB); | |
| MF->insert(It, exitMBB); | |
| // Transfer the remainder of BB and its successor edges to exitMBB. | |
| exitMBB->splice(exitMBB->begin(), BB, | |
| llvm::next(MachineBasicBlock::iterator(MI)), | |
| BB->end()); | |
| exitMBB->transferSuccessorsAndUpdatePHIs(BB); | |
| BB->addSuccessor(loop1MBB); | |
| loop1MBB->addSuccessor(sinkMBB); | |
| loop1MBB->addSuccessor(loop2MBB); | |
| loop2MBB->addSuccessor(loop1MBB); | |
| loop2MBB->addSuccessor(sinkMBB); | |
| sinkMBB->addSuccessor(exitMBB); | |
| // FIXME: computation of newval2 can be moved to loop2MBB. | |
| // thisMBB: | |
| // addiu masklsb2,$0,-4 # 0xfffffffc | |
| // and alignedaddr,ptr,masklsb2 | |
| // andi ptrlsb2,ptr,3 | |
| // sll shiftamt,ptrlsb2,3 | |
| // ori maskupper,$0,255 # 0xff | |
| // sll mask,maskupper,shiftamt | |
| // nor mask2,$0,mask | |
| // andi maskedcmpval,cmpval,255 | |
| // sll shiftedcmpval,maskedcmpval,shiftamt | |
| // andi maskednewval,newval,255 | |
| // sll shiftednewval,maskednewval,shiftamt | |
| int64_t MaskImm = (Size == 1) ? 255 : 65535; | |
| BuildMI(BB, dl, TII->get(Mips::ADDiu), MaskLSB2) | |
| .addReg(Mips::ZERO).addImm(-4); | |
| BuildMI(BB, dl, TII->get(Mips::AND), AlignedAddr) | |
| .addReg(Ptr).addReg(MaskLSB2); | |
| BuildMI(BB, dl, TII->get(Mips::ANDi), PtrLSB2).addReg(Ptr).addImm(3); | |
| BuildMI(BB, dl, TII->get(Mips::SLL), ShiftAmt).addReg(PtrLSB2).addImm(3); | |
| BuildMI(BB, dl, TII->get(Mips::ORi), MaskUpper) | |
| .addReg(Mips::ZERO).addImm(MaskImm); | |
| BuildMI(BB, dl, TII->get(Mips::SLLV), Mask) | |
| .addReg(ShiftAmt).addReg(MaskUpper); | |
| BuildMI(BB, dl, TII->get(Mips::NOR), Mask2).addReg(Mips::ZERO).addReg(Mask); | |
| BuildMI(BB, dl, TII->get(Mips::ANDi), MaskedCmpVal) | |
| .addReg(CmpVal).addImm(MaskImm); | |
| BuildMI(BB, dl, TII->get(Mips::SLLV), ShiftedCmpVal) | |
| .addReg(ShiftAmt).addReg(MaskedCmpVal); | |
| BuildMI(BB, dl, TII->get(Mips::ANDi), MaskedNewVal) | |
| .addReg(NewVal).addImm(MaskImm); | |
| BuildMI(BB, dl, TII->get(Mips::SLLV), ShiftedNewVal) | |
| .addReg(ShiftAmt).addReg(MaskedNewVal); | |
| // loop1MBB: | |
| // ll oldval,0(alginedaddr) | |
| // and maskedoldval0,oldval,mask | |
| // bne maskedoldval0,shiftedcmpval,sinkMBB | |
| BB = loop1MBB; | |
| BuildMI(BB, dl, TII->get(Mips::LL), OldVal).addReg(AlignedAddr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::AND), MaskedOldVal0) | |
| .addReg(OldVal).addReg(Mask); | |
| BuildMI(BB, dl, TII->get(Mips::BNE)) | |
| .addReg(MaskedOldVal0).addReg(ShiftedCmpVal).addMBB(sinkMBB); | |
| // loop2MBB: | |
| // and maskedoldval1,oldval,mask2 | |
| // or storeval,maskedoldval1,shiftednewval | |
| // sc success,storeval,0(alignedaddr) | |
| // beq success,$0,loop1MBB | |
| BB = loop2MBB; | |
| BuildMI(BB, dl, TII->get(Mips::AND), MaskedOldVal1) | |
| .addReg(OldVal).addReg(Mask2); | |
| BuildMI(BB, dl, TII->get(Mips::OR), StoreVal) | |
| .addReg(MaskedOldVal1).addReg(ShiftedNewVal); | |
| BuildMI(BB, dl, TII->get(Mips::SC), Success) | |
| .addReg(StoreVal).addReg(AlignedAddr).addImm(0); | |
| BuildMI(BB, dl, TII->get(Mips::BEQ)) | |
| .addReg(Success).addReg(Mips::ZERO).addMBB(loop1MBB); | |
| // sinkMBB: | |
| // srl srlres,maskedoldval0,shiftamt | |
| // sll sllres,srlres,24 | |
| // sra dest,sllres,24 | |
| BB = sinkMBB; | |
| int64_t ShiftImm = (Size == 1) ? 24 : 16; | |
| BuildMI(BB, dl, TII->get(Mips::SRLV), SrlRes) | |
| .addReg(ShiftAmt).addReg(MaskedOldVal0); | |
| BuildMI(BB, dl, TII->get(Mips::SLL), SllRes) | |
| .addReg(SrlRes).addImm(ShiftImm); | |
| BuildMI(BB, dl, TII->get(Mips::SRA), Dest) | |
| .addReg(SllRes).addImm(ShiftImm); | |
| MI->eraseFromParent(); // The instruction is gone now. | |
| return exitMBB; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Misc Lower Operation implementation | |
| //===----------------------------------------------------------------------===// | |
| SDValue MipsTargetLowering:: | |
| LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| MachineFunction &MF = DAG.getMachineFunction(); | |
| MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); | |
| assert(getTargetMachine().getFrameLowering()->getStackAlignment() >= | |
| cast<ConstantSDNode>(Op.getOperand(2).getNode())->getZExtValue() && | |
| "Cannot lower if the alignment of the allocated space is larger than \ | |
| that of the stack."); | |
| SDValue Chain = Op.getOperand(0); | |
| SDValue Size = Op.getOperand(1); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| // Get a reference from Mips stack pointer | |
| SDValue StackPointer = DAG.getCopyFromReg(Chain, dl, Mips::SP, MVT::i32); | |
| // Subtract the dynamic size from the actual stack size to | |
| // obtain the new stack size. | |
| SDValue Sub = DAG.getNode(ISD::SUB, dl, MVT::i32, StackPointer, Size); | |
| // The Sub result contains the new stack start address, so it | |
| // must be placed in the stack pointer register. | |
| Chain = DAG.getCopyToReg(StackPointer.getValue(1), dl, Mips::SP, Sub, | |
| SDValue()); | |
| // This node always has two return values: a new stack pointer | |
| // value and a chain | |
| SDVTList VTLs = DAG.getVTList(MVT::i32, MVT::Other); | |
| SDValue Ptr = DAG.getFrameIndex(MipsFI->getDynAllocFI(), getPointerTy()); | |
| SDValue Ops[] = { Chain, Ptr, Chain.getValue(1) }; | |
| return DAG.getNode(MipsISD::DynAlloc, dl, VTLs, Ops, 3); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerBRCOND(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| // The first operand is the chain, the second is the condition, the third is | |
| // the block to branch to if the condition is true. | |
| SDValue Chain = Op.getOperand(0); | |
| SDValue Dest = Op.getOperand(2); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| SDValue CondRes = CreateFPCmp(DAG, Op.getOperand(1)); | |
| // Return if flag is not set by a floating point comparison. | |
| if (CondRes.getOpcode() != MipsISD::FPCmp) | |
| return Op; | |
| SDValue CCNode = CondRes.getOperand(2); | |
| Mips::CondCode CC = | |
| (Mips::CondCode)cast<ConstantSDNode>(CCNode)->getZExtValue(); | |
| SDValue BrCode = DAG.getConstant(GetFPBranchCodeFromCond(CC), MVT::i32); | |
| return DAG.getNode(MipsISD::FPBrcond, dl, Op.getValueType(), Chain, BrCode, | |
| Dest, CondRes); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerSELECT(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| SDValue Cond = CreateFPCmp(DAG, Op.getOperand(0)); | |
| // Return if flag is not set by a floating point comparison. | |
| if (Cond.getOpcode() != MipsISD::FPCmp) | |
| return Op; | |
| return CreateCMovFP(DAG, Cond, Op.getOperand(1), Op.getOperand(2), | |
| Op.getDebugLoc()); | |
| } | |
| SDValue MipsTargetLowering::LowerGlobalAddress(SDValue Op, | |
| SelectionDAG &DAG) const { | |
| // FIXME there isn't actually debug info here | |
| DebugLoc dl = Op.getDebugLoc(); | |
| const GlobalValue *GV = cast<GlobalAddressSDNode>(Op)->getGlobal(); | |
| if (getTargetMachine().getRelocationModel() != Reloc::PIC_ && !IsN64) { | |
| SDVTList VTs = DAG.getVTList(MVT::i32); | |
| MipsTargetObjectFile &TLOF = (MipsTargetObjectFile&)getObjFileLowering(); | |
| // %gp_rel relocation | |
| if (TLOF.IsGlobalInSmallSection(GV, getTargetMachine())) { | |
| SDValue GA = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_GPREL); | |
| SDValue GPRelNode = DAG.getNode(MipsISD::GPRel, dl, VTs, &GA, 1); | |
| SDValue GOT = DAG.getGLOBAL_OFFSET_TABLE(MVT::i32); | |
| return DAG.getNode(ISD::ADD, dl, MVT::i32, GOT, GPRelNode); | |
| } | |
| // %hi/%lo relocation | |
| SDValue GAHi = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_ABS_HI); | |
| SDValue GALo = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_ABS_LO); | |
| SDValue HiPart = DAG.getNode(MipsISD::Hi, dl, VTs, &GAHi, 1); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, GALo); | |
| return DAG.getNode(ISD::ADD, dl, MVT::i32, HiPart, Lo); | |
| } | |
| EVT ValTy = Op.getValueType(); | |
| bool HasGotOfst = (GV->hasInternalLinkage() || | |
| (GV->hasLocalLinkage() && !isa<Function>(GV))); | |
| unsigned GotFlag = IsN64 ? | |
| (HasGotOfst ? MipsII::MO_GOT_PAGE : MipsII::MO_GOT_DISP) : | |
| MipsII::MO_GOT; | |
| SDValue GA = DAG.getTargetGlobalAddress(GV, dl, ValTy, 0, GotFlag); | |
| GA = DAG.getNode(MipsISD::WrapperPIC, dl, ValTy, GA); | |
| SDValue ResNode = DAG.getLoad(ValTy, dl, | |
| DAG.getEntryNode(), GA, MachinePointerInfo(), | |
| false, false, 0); | |
| // On functions and global targets not internal linked only | |
| // a load from got/GP is necessary for PIC to work. | |
| if (!HasGotOfst) | |
| return ResNode; | |
| SDValue GALo = DAG.getTargetGlobalAddress(GV, dl, ValTy, 0, | |
| IsN64 ? MipsII::MO_GOT_OFST : | |
| MipsII::MO_ABS_LO); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, ValTy, GALo); | |
| return DAG.getNode(ISD::ADD, dl, ValTy, ResNode, Lo); | |
| } | |
| SDValue MipsTargetLowering::LowerBlockAddress(SDValue Op, | |
| SelectionDAG &DAG) const { | |
| const BlockAddress *BA = cast<BlockAddressSDNode>(Op)->getBlockAddress(); | |
| // FIXME there isn't actually debug info here | |
| DebugLoc dl = Op.getDebugLoc(); | |
| if (getTargetMachine().getRelocationModel() != Reloc::PIC_) { | |
| // %hi/%lo relocation | |
| SDValue BAHi = DAG.getBlockAddress(BA, MVT::i32, true, | |
| MipsII::MO_ABS_HI); | |
| SDValue BALo = DAG.getBlockAddress(BA, MVT::i32, true, | |
| MipsII::MO_ABS_LO); | |
| SDValue Hi = DAG.getNode(MipsISD::Hi, dl, MVT::i32, BAHi); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, BALo); | |
| return DAG.getNode(ISD::ADD, dl, MVT::i32, Hi, Lo); | |
| } | |
| SDValue BAGOTOffset = DAG.getBlockAddress(BA, MVT::i32, true, | |
| MipsII::MO_GOT); | |
| BAGOTOffset = DAG.getNode(MipsISD::WrapperPIC, dl, MVT::i32, BAGOTOffset); | |
| SDValue BALOOffset = DAG.getBlockAddress(BA, MVT::i32, true, | |
| MipsII::MO_ABS_LO); | |
| SDValue Load = DAG.getLoad(MVT::i32, dl, | |
| DAG.getEntryNode(), BAGOTOffset, | |
| MachinePointerInfo(), false, false, 0); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, BALOOffset); | |
| return DAG.getNode(ISD::ADD, dl, MVT::i32, Load, Lo); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| // If the relocation model is PIC, use the General Dynamic TLS Model, | |
| // otherwise use the Initial Exec or Local Exec TLS Model. | |
| // TODO: implement Local Dynamic TLS model | |
| GlobalAddressSDNode *GA = cast<GlobalAddressSDNode>(Op); | |
| DebugLoc dl = GA->getDebugLoc(); | |
| const GlobalValue *GV = GA->getGlobal(); | |
| EVT PtrVT = getPointerTy(); | |
| if (getTargetMachine().getRelocationModel() == Reloc::PIC_) { | |
| // General Dynamic TLS Model | |
| SDValue TGA = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, | |
| 0, MipsII::MO_TLSGD); | |
| SDValue Tlsgd = DAG.getNode(MipsISD::TlsGd, dl, MVT::i32, TGA); | |
| SDValue GP = DAG.getRegister(Mips::GP, MVT::i32); | |
| SDValue Argument = DAG.getNode(ISD::ADD, dl, MVT::i32, GP, Tlsgd); | |
| ArgListTy Args; | |
| ArgListEntry Entry; | |
| Entry.Node = Argument; | |
| Entry.Ty = (Type *) Type::getInt32Ty(*DAG.getContext()); | |
| Args.push_back(Entry); | |
| std::pair<SDValue, SDValue> CallResult = | |
| LowerCallTo(DAG.getEntryNode(), | |
| (Type *) Type::getInt32Ty(*DAG.getContext()), | |
| false, false, false, false, 0, CallingConv::C, false, true, | |
| DAG.getExternalSymbol("__tls_get_addr", PtrVT), Args, DAG, | |
| dl); | |
| return CallResult.first; | |
| } | |
| SDValue Offset; | |
| if (GV->isDeclaration()) { | |
| // Initial Exec TLS Model | |
| SDValue TGA = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_GOTTPREL); | |
| Offset = DAG.getLoad(MVT::i32, dl, | |
| DAG.getEntryNode(), TGA, MachinePointerInfo(), | |
| false, false, 0); | |
| } else { | |
| // Local Exec TLS Model | |
| SDVTList VTs = DAG.getVTList(MVT::i32); | |
| SDValue TGAHi = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_TPREL_HI); | |
| SDValue TGALo = DAG.getTargetGlobalAddress(GV, dl, MVT::i32, 0, | |
| MipsII::MO_TPREL_LO); | |
| SDValue Hi = DAG.getNode(MipsISD::TprelHi, dl, VTs, &TGAHi, 1); | |
| SDValue Lo = DAG.getNode(MipsISD::TprelLo, dl, MVT::i32, TGALo); | |
| Offset = DAG.getNode(ISD::ADD, dl, MVT::i32, Hi, Lo); | |
| } | |
| SDValue ThreadPointer = DAG.getNode(MipsISD::ThreadPointer, dl, PtrVT); | |
| return DAG.getNode(ISD::ADD, dl, PtrVT, ThreadPointer, Offset); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerJumpTable(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| SDValue ResNode; | |
| SDValue HiPart; | |
| // FIXME there isn't actually debug info here | |
| DebugLoc dl = Op.getDebugLoc(); | |
| bool IsPIC = getTargetMachine().getRelocationModel() == Reloc::PIC_; | |
| unsigned char OpFlag = IsPIC ? MipsII::MO_GOT : MipsII::MO_ABS_HI; | |
| EVT PtrVT = Op.getValueType(); | |
| JumpTableSDNode *JT = cast<JumpTableSDNode>(Op); | |
| SDValue JTI = DAG.getTargetJumpTable(JT->getIndex(), PtrVT, OpFlag); | |
| if (!IsPIC) { | |
| SDValue Ops[] = { JTI }; | |
| HiPart = DAG.getNode(MipsISD::Hi, dl, DAG.getVTList(MVT::i32), Ops, 1); | |
| } else {// Emit Load from Global Pointer | |
| JTI = DAG.getNode(MipsISD::WrapperPIC, dl, MVT::i32, JTI); | |
| HiPart = DAG.getLoad(MVT::i32, dl, DAG.getEntryNode(), JTI, | |
| MachinePointerInfo(), | |
| false, false, 0); | |
| } | |
| SDValue JTILo = DAG.getTargetJumpTable(JT->getIndex(), PtrVT, | |
| MipsII::MO_ABS_LO); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, JTILo); | |
| ResNode = DAG.getNode(ISD::ADD, dl, MVT::i32, HiPart, Lo); | |
| return ResNode; | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerConstantPool(SDValue Op, SelectionDAG &DAG) const | |
| { | |
| SDValue ResNode; | |
| ConstantPoolSDNode *N = cast<ConstantPoolSDNode>(Op); | |
| const Constant *C = N->getConstVal(); | |
| // FIXME there isn't actually debug info here | |
| DebugLoc dl = Op.getDebugLoc(); | |
| // gp_rel relocation | |
| // FIXME: we should reference the constant pool using small data sections, | |
| // but the asm printer currently doesn't support this feature without | |
| // hacking it. This feature should come soon so we can uncomment the | |
| // stuff below. | |
| //if (IsInSmallSection(C->getType())) { | |
| // SDValue GPRelNode = DAG.getNode(MipsISD::GPRel, MVT::i32, CP); | |
| // SDValue GOT = DAG.getGLOBAL_OFFSET_TABLE(MVT::i32); | |
| // ResNode = DAG.getNode(ISD::ADD, MVT::i32, GOT, GPRelNode); | |
| if (getTargetMachine().getRelocationModel() != Reloc::PIC_) { | |
| SDValue CPHi = DAG.getTargetConstantPool(C, MVT::i32, N->getAlignment(), | |
| N->getOffset(), MipsII::MO_ABS_HI); | |
| SDValue CPLo = DAG.getTargetConstantPool(C, MVT::i32, N->getAlignment(), | |
| N->getOffset(), MipsII::MO_ABS_LO); | |
| SDValue HiPart = DAG.getNode(MipsISD::Hi, dl, MVT::i32, CPHi); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, CPLo); | |
| ResNode = DAG.getNode(ISD::ADD, dl, MVT::i32, HiPart, Lo); | |
| } else { | |
| SDValue CP = DAG.getTargetConstantPool(C, MVT::i32, N->getAlignment(), | |
| N->getOffset(), MipsII::MO_GOT); | |
| CP = DAG.getNode(MipsISD::WrapperPIC, dl, MVT::i32, CP); | |
| SDValue Load = DAG.getLoad(MVT::i32, dl, DAG.getEntryNode(), | |
| CP, MachinePointerInfo::getConstantPool(), | |
| false, false, 0); | |
| SDValue CPLo = DAG.getTargetConstantPool(C, MVT::i32, N->getAlignment(), | |
| N->getOffset(), MipsII::MO_ABS_LO); | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, CPLo); | |
| ResNode = DAG.getNode(ISD::ADD, dl, MVT::i32, Load, Lo); | |
| } | |
| return ResNode; | |
| } | |
| SDValue MipsTargetLowering::LowerVASTART(SDValue Op, SelectionDAG &DAG) const { | |
| MachineFunction &MF = DAG.getMachineFunction(); | |
| MipsFunctionInfo *FuncInfo = MF.getInfo<MipsFunctionInfo>(); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| SDValue FI = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), | |
| getPointerTy()); | |
| // vastart just stores the address of the VarArgsFrameIndex slot into the | |
| // memory location argument. | |
| const Value *SV = cast<SrcValueSDNode>(Op.getOperand(2))->getValue(); | |
| return DAG.getStore(Op.getOperand(0), dl, FI, Op.getOperand(1), | |
| MachinePointerInfo(SV), | |
| false, false, 0); | |
| } | |
| static SDValue LowerFCOPYSIGN32(SDValue Op, SelectionDAG &DAG) { | |
| // FIXME: Use ext/ins instructions if target architecture is Mips32r2. | |
| DebugLoc dl = Op.getDebugLoc(); | |
| SDValue Op0 = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Op.getOperand(0)); | |
| SDValue Op1 = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Op.getOperand(1)); | |
| SDValue And0 = DAG.getNode(ISD::AND, dl, MVT::i32, Op0, | |
| DAG.getConstant(0x7fffffff, MVT::i32)); | |
| SDValue And1 = DAG.getNode(ISD::AND, dl, MVT::i32, Op1, | |
| DAG.getConstant(0x80000000, MVT::i32)); | |
| SDValue Result = DAG.getNode(ISD::OR, dl, MVT::i32, And0, And1); | |
| return DAG.getNode(ISD::BITCAST, dl, MVT::f32, Result); | |
| } | |
| static SDValue LowerFCOPYSIGN64(SDValue Op, SelectionDAG &DAG, bool isLittle) { | |
| // FIXME: | |
| // Use ext/ins instructions if target architecture is Mips32r2. | |
| // Eliminate redundant mfc1 and mtc1 instructions. | |
| unsigned LoIdx = 0, HiIdx = 1; | |
| if (!isLittle) | |
| std::swap(LoIdx, HiIdx); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| SDValue Word0 = DAG.getNode(MipsISD::ExtractElementF64, dl, MVT::i32, | |
| Op.getOperand(0), | |
| DAG.getConstant(LoIdx, MVT::i32)); | |
| SDValue Hi0 = DAG.getNode(MipsISD::ExtractElementF64, dl, MVT::i32, | |
| Op.getOperand(0), DAG.getConstant(HiIdx, MVT::i32)); | |
| SDValue Hi1 = DAG.getNode(MipsISD::ExtractElementF64, dl, MVT::i32, | |
| Op.getOperand(1), DAG.getConstant(HiIdx, MVT::i32)); | |
| SDValue And0 = DAG.getNode(ISD::AND, dl, MVT::i32, Hi0, | |
| DAG.getConstant(0x7fffffff, MVT::i32)); | |
| SDValue And1 = DAG.getNode(ISD::AND, dl, MVT::i32, Hi1, | |
| DAG.getConstant(0x80000000, MVT::i32)); | |
| SDValue Word1 = DAG.getNode(ISD::OR, dl, MVT::i32, And0, And1); | |
| if (!isLittle) | |
| std::swap(Word0, Word1); | |
| return DAG.getNode(MipsISD::BuildPairF64, dl, MVT::f64, Word0, Word1); | |
| } | |
| SDValue MipsTargetLowering::LowerFCOPYSIGN(SDValue Op, SelectionDAG &DAG) | |
| const { | |
| EVT Ty = Op.getValueType(); | |
| assert(Ty == MVT::f32 || Ty == MVT::f64); | |
| if (Ty == MVT::f32) | |
| return LowerFCOPYSIGN32(Op, DAG); | |
| else | |
| return LowerFCOPYSIGN64(Op, DAG, Subtarget->isLittle()); | |
| } | |
| SDValue MipsTargetLowering:: | |
| LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const { | |
| // check the depth | |
| assert((cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue() == 0) && | |
| "Frame address can only be determined for current frame."); | |
| MachineFrameInfo *MFI = DAG.getMachineFunction().getFrameInfo(); | |
| MFI->setFrameAddressIsTaken(true); | |
| EVT VT = Op.getValueType(); | |
| DebugLoc dl = Op.getDebugLoc(); | |
| SDValue FrameAddr = DAG.getCopyFromReg(DAG.getEntryNode(), dl, Mips::FP, VT); | |
| return FrameAddr; | |
| } | |
| // TODO: set SType according to the desired memory barrier behavior. | |
| SDValue MipsTargetLowering::LowerMEMBARRIER(SDValue Op, | |
| SelectionDAG& DAG) const { | |
| unsigned SType = 0; | |
| DebugLoc dl = Op.getDebugLoc(); | |
| return DAG.getNode(MipsISD::Sync, dl, MVT::Other, Op.getOperand(0), | |
| DAG.getConstant(SType, MVT::i32)); | |
| } | |
| SDValue MipsTargetLowering::LowerATOMIC_FENCE(SDValue Op, | |
| SelectionDAG& DAG) const { | |
| // FIXME: Need pseudo-fence for 'singlethread' fences | |
| // FIXME: Set SType for weaker fences where supported/appropriate. | |
| unsigned SType = 0; | |
| DebugLoc dl = Op.getDebugLoc(); | |
| return DAG.getNode(MipsISD::Sync, dl, MVT::Other, Op.getOperand(0), | |
| DAG.getConstant(SType, MVT::i32)); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Calling Convention Implementation | |
| //===----------------------------------------------------------------------===// | |
| #include "MipsGenCallingConv.inc" | |
| //===----------------------------------------------------------------------===// | |
| // TODO: Implement a generic logic using tblgen that can support this. | |
| // Mips O32 ABI rules: | |
| // --- | |
| // i32 - Passed in A0, A1, A2, A3 and stack | |
| // f32 - Only passed in f32 registers if no int reg has been used yet to hold | |
| // an argument. Otherwise, passed in A1, A2, A3 and stack. | |
| // f64 - Only passed in two aliased f32 registers if no int reg has been used | |
| // yet to hold an argument. Otherwise, use A2, A3 and stack. If A1 is | |
| // not used, it must be shadowed. If only A3 is avaiable, shadow it and | |
| // go to stack. | |
| // | |
| // For vararg functions, all arguments are passed in A0, A1, A2, A3 and stack. | |
| //===----------------------------------------------------------------------===// | |
| static bool CC_MipsO32(unsigned ValNo, MVT ValVT, | |
| MVT LocVT, CCValAssign::LocInfo LocInfo, | |
| ISD::ArgFlagsTy ArgFlags, CCState &State) { | |
| static const unsigned IntRegsSize=4, FloatRegsSize=2; | |
| static const unsigned IntRegs[] = { | |
| Mips::A0, Mips::A1, Mips::A2, Mips::A3 | |
| }; | |
| static const unsigned F32Regs[] = { | |
| Mips::F12, Mips::F14 | |
| }; | |
| static const unsigned F64Regs[] = { | |
| Mips::D6, Mips::D7 | |
| }; | |
| // ByVal Args | |
| if (ArgFlags.isByVal()) { | |
| State.HandleByVal(ValNo, ValVT, LocVT, LocInfo, | |
| 1 /*MinSize*/, 4 /*MinAlign*/, ArgFlags); | |
| unsigned NextReg = (State.getNextStackOffset() + 3) / 4; | |
| for (unsigned r = State.getFirstUnallocated(IntRegs, IntRegsSize); | |
| r < std::min(IntRegsSize, NextReg); ++r) | |
| State.AllocateReg(IntRegs[r]); | |
| return false; | |
| } | |
| // Promote i8 and i16 | |
| if (LocVT == MVT::i8 || LocVT == MVT::i16) { | |
| LocVT = MVT::i32; | |
| if (ArgFlags.isSExt()) | |
| LocInfo = CCValAssign::SExt; | |
| else if (ArgFlags.isZExt()) | |
| LocInfo = CCValAssign::ZExt; | |
| else | |
| LocInfo = CCValAssign::AExt; | |
| } | |
| unsigned Reg; | |
| // f32 and f64 are allocated in A0, A1, A2, A3 when either of the following | |
| // is true: function is vararg, argument is 3rd or higher, there is previous | |
| // argument which is not f32 or f64. | |
| bool AllocateFloatsInIntReg = State.isVarArg() || ValNo > 1 | |
| || State.getFirstUnallocated(F32Regs, FloatRegsSize) != ValNo; | |
| unsigned OrigAlign = ArgFlags.getOrigAlign(); | |
| bool isI64 = (ValVT == MVT::i32 && OrigAlign == 8); | |
| if (ValVT == MVT::i32 || (ValVT == MVT::f32 && AllocateFloatsInIntReg)) { | |
| Reg = State.AllocateReg(IntRegs, IntRegsSize); | |
| // If this is the first part of an i64 arg, | |
| // the allocated register must be either A0 or A2. | |
| if (isI64 && (Reg == Mips::A1 || Reg == Mips::A3)) | |
| Reg = State.AllocateReg(IntRegs, IntRegsSize); | |
| LocVT = MVT::i32; | |
| } else if (ValVT == MVT::f64 && AllocateFloatsInIntReg) { | |
| // Allocate int register and shadow next int register. If first | |
| // available register is Mips::A1 or Mips::A3, shadow it too. | |
| Reg = State.AllocateReg(IntRegs, IntRegsSize); | |
| if (Reg == Mips::A1 || Reg == Mips::A3) | |
| Reg = State.AllocateReg(IntRegs, IntRegsSize); | |
| State.AllocateReg(IntRegs, IntRegsSize); | |
| LocVT = MVT::i32; | |
| } else if (ValVT.isFloatingPoint() && !AllocateFloatsInIntReg) { | |
| // we are guaranteed to find an available float register | |
| if (ValVT == MVT::f32) { | |
| Reg = State.AllocateReg(F32Regs, FloatRegsSize); | |
| // Shadow int register | |
| State.AllocateReg(IntRegs, IntRegsSize); | |
| } else { | |
| Reg = State.AllocateReg(F64Regs, FloatRegsSize); | |
| // Shadow int registers | |
| unsigned Reg2 = State.AllocateReg(IntRegs, IntRegsSize); | |
| if (Reg2 == Mips::A1 || Reg2 == Mips::A3) | |
| State.AllocateReg(IntRegs, IntRegsSize); | |
| State.AllocateReg(IntRegs, IntRegsSize); | |
| } | |
| } else | |
| llvm_unreachable("Cannot handle this ValVT."); | |
| unsigned SizeInBytes = ValVT.getSizeInBits() >> 3; | |
| unsigned Offset = State.AllocateStack(SizeInBytes, OrigAlign); | |
| if (!Reg) | |
| State.addLoc(CCValAssign::getMem(ValNo, ValVT, Offset, LocVT, LocInfo)); | |
| else | |
| State.addLoc(CCValAssign::getReg(ValNo, ValVT, Reg, LocVT, LocInfo)); | |
| return false; // CC must always match | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Call Calling Convention Implementation | |
| //===----------------------------------------------------------------------===// | |
| static const unsigned O32IntRegsSize = 4; | |
| static const unsigned O32IntRegs[] = { | |
| Mips::A0, Mips::A1, Mips::A2, Mips::A3 | |
| }; | |
| // Return next O32 integer argument register. | |
| static unsigned getNextIntArgReg(unsigned Reg) { | |
| assert((Reg == Mips::A0) || (Reg == Mips::A2)); | |
| return (Reg == Mips::A0) ? Mips::A1 : Mips::A3; | |
| } | |
| // Write ByVal Arg to arg registers and stack. | |
| static void | |
| WriteByValArg(SDValue& ByValChain, SDValue Chain, DebugLoc dl, | |
| SmallVector<std::pair<unsigned, SDValue>, 16>& RegsToPass, | |
| SmallVector<SDValue, 8>& MemOpChains, int& LastFI, | |
| MachineFrameInfo *MFI, SelectionDAG &DAG, SDValue Arg, | |
| const CCValAssign &VA, const ISD::ArgFlagsTy& Flags, | |
| MVT PtrType, bool isLittle) { | |
| unsigned LocMemOffset = VA.getLocMemOffset(); | |
| unsigned Offset = 0; | |
| uint32_t RemainingSize = Flags.getByValSize(); | |
| unsigned ByValAlign = Flags.getByValAlign(); | |
| // Copy the first 4 words of byval arg to registers A0 - A3. | |
| // FIXME: Use a stricter alignment if it enables better optimization in passes | |
| // run later. | |
| for (; RemainingSize >= 4 && LocMemOffset < 4 * 4; | |
| Offset += 4, RemainingSize -= 4, LocMemOffset += 4) { | |
| SDValue LoadPtr = DAG.getNode(ISD::ADD, dl, MVT::i32, Arg, | |
| DAG.getConstant(Offset, MVT::i32)); | |
| SDValue LoadVal = DAG.getLoad(MVT::i32, dl, Chain, LoadPtr, | |
| MachinePointerInfo(), | |
| false, false, std::min(ByValAlign, | |
| (unsigned )4)); | |
| MemOpChains.push_back(LoadVal.getValue(1)); | |
| unsigned DstReg = O32IntRegs[LocMemOffset / 4]; | |
| RegsToPass.push_back(std::make_pair(DstReg, LoadVal)); | |
| } | |
| if (RemainingSize == 0) | |
| return; | |
| // If there still is a register available for argument passing, write the | |
| // remaining part of the structure to it using subword loads and shifts. | |
| if (LocMemOffset < 4 * 4) { | |
| assert(RemainingSize <= 3 && RemainingSize >= 1 && | |
| "There must be one to three bytes remaining."); | |
| unsigned LoadSize = (RemainingSize == 3 ? 2 : RemainingSize); | |
| SDValue LoadPtr = DAG.getNode(ISD::ADD, dl, MVT::i32, Arg, | |
| DAG.getConstant(Offset, MVT::i32)); | |
| unsigned Alignment = std::min(ByValAlign, (unsigned )4); | |
| SDValue LoadVal = DAG.getExtLoad(ISD::ZEXTLOAD, dl, MVT::i32, Chain, | |
| LoadPtr, MachinePointerInfo(), | |
| MVT::getIntegerVT(LoadSize * 8), false, | |
| false, Alignment); | |
| MemOpChains.push_back(LoadVal.getValue(1)); | |
| // If target is big endian, shift it to the most significant half-word or | |
| // byte. | |
| if (!isLittle) | |
| LoadVal = DAG.getNode(ISD::SHL, dl, MVT::i32, LoadVal, | |
| DAG.getConstant(32 - LoadSize * 8, MVT::i32)); | |
| Offset += LoadSize; | |
| RemainingSize -= LoadSize; | |
| // Read second subword if necessary. | |
| if (RemainingSize != 0) { | |
| assert(RemainingSize == 1 && "There must be one byte remaining."); | |
| LoadPtr = DAG.getNode(ISD::ADD, dl, MVT::i32, Arg, | |
| DAG.getConstant(Offset, MVT::i32)); | |
| unsigned Alignment = std::min(ByValAlign, (unsigned )2); | |
| SDValue Subword = DAG.getExtLoad(ISD::ZEXTLOAD, dl, MVT::i32, Chain, | |
| LoadPtr, MachinePointerInfo(), | |
| MVT::i8, false, false, Alignment); | |
| MemOpChains.push_back(Subword.getValue(1)); | |
| // Insert the loaded byte to LoadVal. | |
| // FIXME: Use INS if supported by target. | |
| unsigned ShiftAmt = isLittle ? 16 : 8; | |
| SDValue Shift = DAG.getNode(ISD::SHL, dl, MVT::i32, Subword, | |
| DAG.getConstant(ShiftAmt, MVT::i32)); | |
| LoadVal = DAG.getNode(ISD::OR, dl, MVT::i32, LoadVal, Shift); | |
| } | |
| unsigned DstReg = O32IntRegs[LocMemOffset / 4]; | |
| RegsToPass.push_back(std::make_pair(DstReg, LoadVal)); | |
| return; | |
| } | |
| // Create a fixed object on stack at offset LocMemOffset and copy | |
| // remaining part of byval arg to it using memcpy. | |
| SDValue Src = DAG.getNode(ISD::ADD, dl, MVT::i32, Arg, | |
| DAG.getConstant(Offset, MVT::i32)); | |
| LastFI = MFI->CreateFixedObject(RemainingSize, LocMemOffset, true); | |
| SDValue Dst = DAG.getFrameIndex(LastFI, PtrType); | |
| ByValChain = DAG.getMemcpy(ByValChain, dl, Dst, Src, | |
| DAG.getConstant(RemainingSize, MVT::i32), | |
| std::min(ByValAlign, (unsigned)4), | |
| /*isVolatile=*/false, /*AlwaysInline=*/false, | |
| MachinePointerInfo(0), MachinePointerInfo(0)); | |
| } | |
| /// LowerCall - functions arguments are copied from virtual regs to | |
| /// (physical regs)/(stack frame), CALLSEQ_START and CALLSEQ_END are emitted. | |
| /// TODO: isTailCall. | |
| SDValue | |
| MipsTargetLowering::LowerCall(SDValue InChain, SDValue Callee, | |
| CallingConv::ID CallConv, bool isVarArg, | |
| bool &isTailCall, | |
| const SmallVectorImpl<ISD::OutputArg> &Outs, | |
| const SmallVectorImpl<SDValue> &OutVals, | |
| const SmallVectorImpl<ISD::InputArg> &Ins, | |
| DebugLoc dl, SelectionDAG &DAG, | |
| SmallVectorImpl<SDValue> &InVals) const { | |
| // MIPs target does not yet support tail call optimization. | |
| isTailCall = false; | |
| MachineFunction &MF = DAG.getMachineFunction(); | |
| MachineFrameInfo *MFI = MF.getFrameInfo(); | |
| const TargetFrameLowering *TFL = MF.getTarget().getFrameLowering(); | |
| bool IsPIC = getTargetMachine().getRelocationModel() == Reloc::PIC_; | |
| MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); | |
| // Analyze operands of the call, assigning locations to each operand. | |
| SmallVector<CCValAssign, 16> ArgLocs; | |
| CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), | |
| getTargetMachine(), ArgLocs, *DAG.getContext()); | |
| if (Subtarget->isABI_O32()) | |
| CCInfo.AnalyzeCallOperands(Outs, CC_MipsO32); | |
| else | |
| CCInfo.AnalyzeCallOperands(Outs, CC_Mips); | |
| // Get a count of how many bytes are to be pushed on the stack. | |
| unsigned NextStackOffset = CCInfo.getNextStackOffset(); | |
| // Chain is the output chain of the last Load/Store or CopyToReg node. | |
| // ByValChain is the output chain of the last Memcpy node created for copying | |
| // byval arguments to the stack. | |
| SDValue Chain, CallSeqStart, ByValChain; | |
| SDValue NextStackOffsetVal = DAG.getIntPtrConstant(NextStackOffset, true); | |
| Chain = CallSeqStart = DAG.getCALLSEQ_START(InChain, NextStackOffsetVal); | |
| ByValChain = InChain; | |
| // If this is the first call, create a stack frame object that points to | |
| // a location to which .cprestore saves $gp. | |
| if (IsPIC && !MipsFI->getGPFI()) | |
| MipsFI->setGPFI(MFI->CreateFixedObject(4, 0, true)); | |
| // Get the frame index of the stack frame object that points to the location | |
| // of dynamically allocated area on the stack. | |
| int DynAllocFI = MipsFI->getDynAllocFI(); | |
| // Update size of the maximum argument space. | |
| // For O32, a minimum of four words (16 bytes) of argument space is | |
| // allocated. | |
| if (Subtarget->isABI_O32()) | |
| NextStackOffset = std::max(NextStackOffset, (unsigned)16); | |
| unsigned MaxCallFrameSize = MipsFI->getMaxCallFrameSize(); | |
| if (MaxCallFrameSize < NextStackOffset) { | |
| MipsFI->setMaxCallFrameSize(NextStackOffset); | |
| // Set the offsets relative to $sp of the $gp restore slot and dynamically | |
| // allocated stack space. These offsets must be aligned to a boundary | |
| // determined by the stack alignment of the ABI. | |
| unsigned StackAlignment = TFL->getStackAlignment(); | |
| NextStackOffset = (NextStackOffset + StackAlignment - 1) / | |
| StackAlignment * StackAlignment; | |
| if (IsPIC) | |
| MFI->setObjectOffset(MipsFI->getGPFI(), NextStackOffset); | |
| MFI->setObjectOffset(DynAllocFI, NextStackOffset); | |
| } | |
| // With EABI is it possible to have 16 args on registers. | |
| SmallVector<std::pair<unsigned, SDValue>, 16> RegsToPass; | |
| SmallVector<SDValue, 8> MemOpChains; | |
| int FirstFI = -MFI->getNumFixedObjects() - 1, LastFI = 0; | |
| // Walk the register/memloc assignments, inserting copies/loads. | |
| for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) { | |
| SDValue Arg = OutVals[i]; | |
| CCValAssign &VA = ArgLocs[i]; | |
| // Promote the value if needed. | |
| switch (VA.getLocInfo()) { | |
| default: llvm_unreachable("Unknown loc info!"); | |
| case CCValAssign::Full: | |
| if (Subtarget->isABI_O32() && VA.isRegLoc()) { | |
| if (VA.getValVT() == MVT::f32 && VA.getLocVT() == MVT::i32) | |
| Arg = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Arg); | |
| if (VA.getValVT() == MVT::f64 && VA.getLocVT() == MVT::i32) { | |
| SDValue Lo = DAG.getNode(MipsISD::ExtractElementF64, dl, MVT::i32, | |
| Arg, DAG.getConstant(0, MVT::i32)); | |
| SDValue Hi = DAG.getNode(MipsISD::ExtractElementF64, dl, MVT::i32, | |
| Arg, DAG.getConstant(1, MVT::i32)); | |
| if (!Subtarget->isLittle()) | |
| std::swap(Lo, Hi); | |
| unsigned LocRegLo = VA.getLocReg(); | |
| unsigned LocRegHigh = getNextIntArgReg(LocRegLo); | |
| RegsToPass.push_back(std::make_pair(LocRegLo, Lo)); | |
| RegsToPass.push_back(std::make_pair(LocRegHigh, Hi)); | |
| continue; | |
| } | |
| } | |
| break; | |
| case CCValAssign::SExt: | |
| Arg = DAG.getNode(ISD::SIGN_EXTEND, dl, VA.getLocVT(), Arg); | |
| break; | |
| case CCValAssign::ZExt: | |
| Arg = DAG.getNode(ISD::ZERO_EXTEND, dl, VA.getLocVT(), Arg); | |
| break; | |
| case CCValAssign::AExt: | |
| Arg = DAG.getNode(ISD::ANY_EXTEND, dl, VA.getLocVT(), Arg); | |
| break; | |
| } | |
| // Arguments that can be passed on register must be kept at | |
| // RegsToPass vector | |
| if (VA.isRegLoc()) { | |
| RegsToPass.push_back(std::make_pair(VA.getLocReg(), Arg)); | |
| continue; | |
| } | |
| // Register can't get to this point... | |
| assert(VA.isMemLoc()); | |
| // ByVal Arg. | |
| ISD::ArgFlagsTy Flags = Outs[i].Flags; | |
| if (Flags.isByVal()) { | |
| assert(Subtarget->isABI_O32() && | |
| "No support for ByVal args by ABIs other than O32 yet."); | |
| assert(Flags.getByValSize() && | |
| "ByVal args of size 0 should have been ignored by front-end."); | |
| WriteByValArg(ByValChain, Chain, dl, RegsToPass, MemOpChains, LastFI, MFI, | |
| DAG, Arg, VA, Flags, getPointerTy(), Subtarget->isLittle()); | |
| continue; | |
| } | |
| // Create the frame index object for this incoming parameter | |
| LastFI = MFI->CreateFixedObject(VA.getValVT().getSizeInBits()/8, | |
| VA.getLocMemOffset(), true); | |
| SDValue PtrOff = DAG.getFrameIndex(LastFI, getPointerTy()); | |
| // emit ISD::STORE whichs stores the | |
| // parameter value to a stack Location | |
| MemOpChains.push_back(DAG.getStore(Chain, dl, Arg, PtrOff, | |
| MachinePointerInfo(), | |
| false, false, 0)); | |
| } | |
| // Extend range of indices of frame objects for outgoing arguments that were | |
| // created during this function call. Skip this step if no such objects were | |
| // created. | |
| if (LastFI) | |
| MipsFI->extendOutArgFIRange(FirstFI, LastFI); | |
| // If a memcpy has been created to copy a byval arg to a stack, replace the | |
| // chain input of CallSeqStart with ByValChain. | |
| if (InChain != ByValChain) | |
| DAG.UpdateNodeOperands(CallSeqStart.getNode(), ByValChain, | |
| NextStackOffsetVal); | |
| // Transform all store nodes into one single node because all store | |
| // nodes are independent of each other. | |
| if (!MemOpChains.empty()) | |
| Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, | |
| &MemOpChains[0], MemOpChains.size()); | |
| // If the callee is a GlobalAddress/ExternalSymbol node (quite common, every | |
| // direct call is) turn it into a TargetGlobalAddress/TargetExternalSymbol | |
| // node so that legalize doesn't hack it. | |
| unsigned char OpFlag = IsPIC ? MipsII::MO_GOT_CALL : MipsII::MO_NO_FLAG; | |
| bool LoadSymAddr = false; | |
| SDValue CalleeLo; | |
| if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee)) { | |
| if (IsPIC && G->getGlobal()->hasInternalLinkage()) { | |
| Callee = DAG.getTargetGlobalAddress(G->getGlobal(), dl, | |
| getPointerTy(), 0,MipsII:: MO_GOT); | |
| CalleeLo = DAG.getTargetGlobalAddress(G->getGlobal(), dl, getPointerTy(), | |
| 0, MipsII::MO_ABS_LO); | |
| } else { | |
| Callee = DAG.getTargetGlobalAddress(G->getGlobal(), dl, | |
| getPointerTy(), 0, OpFlag); | |
| } | |
| LoadSymAddr = true; | |
| } | |
| else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(Callee)) { | |
| Callee = DAG.getTargetExternalSymbol(S->getSymbol(), | |
| getPointerTy(), OpFlag); | |
| LoadSymAddr = true; | |
| } | |
| SDValue InFlag; | |
| // Create nodes that load address of callee and copy it to T9 | |
| if (IsPIC) { | |
| if (LoadSymAddr) { | |
| // Load callee address | |
| Callee = DAG.getNode(MipsISD::WrapperPIC, dl, MVT::i32, Callee); | |
| SDValue LoadValue = DAG.getLoad(MVT::i32, dl, DAG.getEntryNode(), Callee, | |
| MachinePointerInfo::getGOT(), | |
| false, false, 0); | |
| // Use GOT+LO if callee has internal linkage. | |
| if (CalleeLo.getNode()) { | |
| SDValue Lo = DAG.getNode(MipsISD::Lo, dl, MVT::i32, CalleeLo); | |
| Callee = DAG.getNode(ISD::ADD, dl, MVT::i32, LoadValue, Lo); | |
| } else | |
| Callee = LoadValue; | |
| } | |
| // copy to T9 | |
| Chain = DAG.getCopyToReg(Chain, dl, Mips::T9, Callee, SDValue(0, 0)); | |
| InFlag = Chain.getValue(1); | |
| Callee = DAG.getRegister(Mips::T9, MVT::i32); | |
| } | |
| // Build a sequence of copy-to-reg nodes chained together with token | |
| // chain and flag operands which copy the outgoing args into registers. | |
| // The InFlag in necessary since all emitted instructions must be | |
| // stuck together. | |
| for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) { | |
| Chain = DAG.getCopyToReg(Chain, dl, RegsToPass[i].first, | |
| RegsToPass[i].second, InFlag); | |
| InFlag = Chain.getValue(1); | |
| } | |
| // MipsJmpLink = #chain, #target_address, #opt_in_flags... | |
| // = Chain, Callee, Reg#1, Reg#2, ... | |
| // | |
| // Returns a chain & a flag for retval copy to use. | |
| SDVTList NodeTys = DAG.getVTList(MVT::Other, MVT::Glue); | |
| SmallVector<SDValue, 8> Ops; | |
| Ops.push_back(Chain); | |
| Ops.push_back(Callee); | |
| // Add argument registers to the end of the list so that they are | |
| // known live into the call. | |
| for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) | |
| Ops.push_back(DAG.getRegister(RegsToPass[i].first, | |
| RegsToPass[i].second.getValueType())); | |
| if (InFlag.getNode()) | |
| Ops.push_back(InFlag); | |
| Chain = DAG.getNode(MipsISD::JmpLink, dl, NodeTys, &Ops[0], Ops.size()); | |
| InFlag = Chain.getValue(1); | |
| // Create the CALLSEQ_END node. | |
| Chain = DAG.getCALLSEQ_END(Chain, | |
| DAG.getIntPtrConstant(NextStackOffset, true), | |
| DAG.getIntPtrConstant(0, true), InFlag); | |
| InFlag = Chain.getValue(1); | |
| // Handle result values, copying them out of physregs into vregs that we | |
| // return. | |
| return LowerCallResult(Chain, InFlag, CallConv, isVarArg, | |
| Ins, dl, DAG, InVals); | |
| } | |
| /// LowerCallResult - Lower the result values of a call into the | |
| /// appropriate copies out of appropriate physical registers. | |
| SDValue | |
| MipsTargetLowering::LowerCallResult(SDValue Chain, SDValue InFlag, | |
| CallingConv::ID CallConv, bool isVarArg, | |
| const SmallVectorImpl<ISD::InputArg> &Ins, | |
| DebugLoc dl, SelectionDAG &DAG, | |
| SmallVectorImpl<SDValue> &InVals) const { | |
| // Assign locations to each value returned by this call. | |
| SmallVector<CCValAssign, 16> RVLocs; | |
| CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), | |
| getTargetMachine(), RVLocs, *DAG.getContext()); | |
| CCInfo.AnalyzeCallResult(Ins, RetCC_Mips); | |
| // Copy all of the result registers out of their specified physreg. | |
| for (unsigned i = 0; i != RVLocs.size(); ++i) { | |
| Chain = DAG.getCopyFromReg(Chain, dl, RVLocs[i].getLocReg(), | |
| RVLocs[i].getValVT(), InFlag).getValue(1); | |
| InFlag = Chain.getValue(2); | |
| InVals.push_back(Chain.getValue(0)); | |
| } | |
| return Chain; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Formal Arguments Calling Convention Implementation | |
| //===----------------------------------------------------------------------===// | |
| static void ReadByValArg(MachineFunction &MF, SDValue Chain, DebugLoc dl, | |
| std::vector<SDValue>& OutChains, | |
| SelectionDAG &DAG, unsigned NumWords, SDValue FIN, | |
| const CCValAssign &VA, const ISD::ArgFlagsTy& Flags) { | |
| unsigned LocMem = VA.getLocMemOffset(); | |
| unsigned FirstWord = LocMem / 4; | |
| // copy register A0 - A3 to frame object | |
| for (unsigned i = 0; i < NumWords; ++i) { | |
| unsigned CurWord = FirstWord + i; | |
| if (CurWord >= O32IntRegsSize) | |
| break; | |
| unsigned SrcReg = O32IntRegs[CurWord]; | |
| unsigned Reg = AddLiveIn(MF, SrcReg, Mips::CPURegsRegisterClass); | |
| SDValue StorePtr = DAG.getNode(ISD::ADD, dl, MVT::i32, FIN, | |
| DAG.getConstant(i * 4, MVT::i32)); | |
| SDValue Store = DAG.getStore(Chain, dl, DAG.getRegister(Reg, MVT::i32), | |
| StorePtr, MachinePointerInfo(), false, | |
| false, 0); | |
| OutChains.push_back(Store); | |
| } | |
| } | |
| /// LowerFormalArguments - transform physical registers into virtual registers | |
| /// and generate load operations for arguments places on the stack. | |
| SDValue | |
| MipsTargetLowering::LowerFormalArguments(SDValue Chain, | |
| CallingConv::ID CallConv, | |
| bool isVarArg, | |
| const SmallVectorImpl<ISD::InputArg> | |
| &Ins, | |
| DebugLoc dl, SelectionDAG &DAG, | |
| SmallVectorImpl<SDValue> &InVals) | |
| const { | |
| MachineFunction &MF = DAG.getMachineFunction(); | |
| MachineFrameInfo *MFI = MF.getFrameInfo(); | |
| MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); | |
| MipsFI->setVarArgsFrameIndex(0); | |
| // Used with vargs to acumulate store chains. | |
| std::vector<SDValue> OutChains; | |
| // Assign locations to all of the incoming arguments. | |
| SmallVector<CCValAssign, 16> ArgLocs; | |
| CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), | |
| getTargetMachine(), ArgLocs, *DAG.getContext()); | |
| if (Subtarget->isABI_O32()) | |
| CCInfo.AnalyzeFormalArguments(Ins, CC_MipsO32); | |
| else | |
| CCInfo.AnalyzeFormalArguments(Ins, CC_Mips); | |
| int LastFI = 0;// MipsFI->LastInArgFI is 0 at the entry of this function. | |
| for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) { | |
| CCValAssign &VA = ArgLocs[i]; | |
| // Arguments stored on registers | |
| if (VA.isRegLoc()) { | |
| EVT RegVT = VA.getLocVT(); | |
| unsigned ArgReg = VA.getLocReg(); | |
| TargetRegisterClass *RC = 0; | |
| if (RegVT == MVT::i32) | |
| RC = Mips::CPURegsRegisterClass; | |
| else if (RegVT == MVT::i64) | |
| RC = Mips::CPU64RegsRegisterClass; | |
| else if (RegVT == MVT::f32) | |
| RC = Mips::FGR32RegisterClass; | |
| else if (RegVT == MVT::f64) | |
| RC = HasMips64 ? Mips::FGR64RegisterClass : Mips::AFGR64RegisterClass; | |
| else | |
| llvm_unreachable("RegVT not supported by FormalArguments Lowering"); | |
| // Transform the arguments stored on | |
| // physical registers into virtual ones | |
| unsigned Reg = AddLiveIn(DAG.getMachineFunction(), ArgReg, RC); | |
| SDValue ArgValue = DAG.getCopyFromReg(Chain, dl, Reg, RegVT); | |
| // If this is an 8 or 16-bit value, it has been passed promoted | |
| // to 32 bits. Insert an assert[sz]ext to capture this, then | |
| // truncate to the right size. | |
| if (VA.getLocInfo() != CCValAssign::Full) { | |
| unsigned Opcode = 0; | |
| if (VA.getLocInfo() == CCValAssign::SExt) | |
| Opcode = ISD::AssertSext; | |
| else if (VA.getLocInfo() == CCValAssign::ZExt) | |
| Opcode = ISD::AssertZext; | |
| if (Opcode) | |
| ArgValue = DAG.getNode(Opcode, dl, RegVT, ArgValue, | |
| DAG.getValueType(VA.getValVT())); | |
| ArgValue = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), ArgValue); | |
| } | |
| // Handle O32 ABI cases: i32->f32 and (i32,i32)->f64 | |
| if (Subtarget->isABI_O32()) { | |
| if (RegVT == MVT::i32 && VA.getValVT() == MVT::f32) | |
| ArgValue = DAG.getNode(ISD::BITCAST, dl, MVT::f32, ArgValue); | |
| if (RegVT == MVT::i32 && VA.getValVT() == MVT::f64) { | |
| unsigned Reg2 = AddLiveIn(DAG.getMachineFunction(), | |
| getNextIntArgReg(ArgReg), RC); | |
| SDValue ArgValue2 = DAG.getCopyFromReg(Chain, dl, Reg2, RegVT); | |
| if (!Subtarget->isLittle()) | |
| std::swap(ArgValue, ArgValue2); | |
| ArgValue = DAG.getNode(MipsISD::BuildPairF64, dl, MVT::f64, | |
| ArgValue, ArgValue2); | |
| } | |
| } | |
| InVals.push_back(ArgValue); | |
| } else { // VA.isRegLoc() | |
| // sanity check | |
| assert(VA.isMemLoc()); | |
| ISD::ArgFlagsTy Flags = Ins[i].Flags; | |
| if (Flags.isByVal()) { | |
| assert(Subtarget->isABI_O32() && | |
| "No support for ByVal args by ABIs other than O32 yet."); | |
| assert(Flags.getByValSize() && | |
| "ByVal args of size 0 should have been ignored by front-end."); | |
| unsigned NumWords = (Flags.getByValSize() + 3) / 4; | |
| LastFI = MFI->CreateFixedObject(NumWords * 4, VA.getLocMemOffset(), | |
| true); | |
| SDValue FIN = DAG.getFrameIndex(LastFI, getPointerTy()); | |
| InVals.push_back(FIN); | |
| ReadByValArg(MF, Chain, dl, OutChains, DAG, NumWords, FIN, VA, Flags); | |
| continue; | |
| } | |
| // The stack pointer offset is relative to the caller stack frame. | |
| LastFI = MFI->CreateFixedObject(VA.getValVT().getSizeInBits()/8, | |
| VA.getLocMemOffset(), true); | |
| // Create load nodes to retrieve arguments from the stack | |
| SDValue FIN = DAG.getFrameIndex(LastFI, getPointerTy()); | |
| InVals.push_back(DAG.getLoad(VA.getValVT(), dl, Chain, FIN, | |
| MachinePointerInfo::getFixedStack(LastFI), | |
| false, false, 0)); | |
| } | |
| } | |
| // The mips ABIs for returning structs by value requires that we copy | |
| // the sret argument into $v0 for the return. Save the argument into | |
| // a virtual register so that we can access it from the return points. | |
| if (DAG.getMachineFunction().getFunction()->hasStructRetAttr()) { | |
| unsigned Reg = MipsFI->getSRetReturnReg(); | |
| if (!Reg) { | |
| Reg = MF.getRegInfo().createVirtualRegister(getRegClassFor(MVT::i32)); | |
| MipsFI->setSRetReturnReg(Reg); | |
| } | |
| SDValue Copy = DAG.getCopyToReg(DAG.getEntryNode(), dl, Reg, InVals[0]); | |
| Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, Copy, Chain); | |
| } | |
| if (isVarArg && Subtarget->isABI_O32()) { | |
| // Record the frame index of the first variable argument | |
| // which is a value necessary to VASTART. | |
| unsigned NextStackOffset = CCInfo.getNextStackOffset(); | |
| assert(NextStackOffset % 4 == 0 && | |
| "NextStackOffset must be aligned to 4-byte boundaries."); | |
| LastFI = MFI->CreateFixedObject(4, NextStackOffset, true); | |
| MipsFI->setVarArgsFrameIndex(LastFI); | |
| // If NextStackOffset is smaller than o32's 16-byte reserved argument area, | |
| // copy the integer registers that have not been used for argument passing | |
| // to the caller's stack frame. | |
| for (; NextStackOffset < 16; NextStackOffset += 4) { | |
| TargetRegisterClass *RC = Mips::CPURegsRegisterClass; | |
| unsigned Idx = NextStackOffset / 4; | |
| unsigned Reg = AddLiveIn(DAG.getMachineFunction(), O32IntRegs[Idx], RC); | |
| SDValue ArgValue = DAG.getCopyFromReg(Chain, dl, Reg, MVT::i32); | |
| LastFI = MFI->CreateFixedObject(4, NextStackOffset, true); | |
| SDValue PtrOff = DAG.getFrameIndex(LastFI, getPointerTy()); | |
| OutChains.push_back(DAG.getStore(Chain, dl, ArgValue, PtrOff, | |
| MachinePointerInfo(), | |
| false, false, 0)); | |
| } | |
| } | |
| MipsFI->setLastInArgFI(LastFI); | |
| // All stores are grouped in one node to allow the matching between | |
| // the size of Ins and InVals. This only happens when on varg functions | |
| if (!OutChains.empty()) { | |
| OutChains.push_back(Chain); | |
| Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, | |
| &OutChains[0], OutChains.size()); | |
| } | |
| return Chain; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Return Value Calling Convention Implementation | |
| //===----------------------------------------------------------------------===// | |
| SDValue | |
| MipsTargetLowering::LowerReturn(SDValue Chain, | |
| CallingConv::ID CallConv, bool isVarArg, | |
| const SmallVectorImpl<ISD::OutputArg> &Outs, | |
| const SmallVectorImpl<SDValue> &OutVals, | |
| DebugLoc dl, SelectionDAG &DAG) const { | |
| // CCValAssign - represent the assignment of | |
| // the return value to a location | |
| SmallVector<CCValAssign, 16> RVLocs; | |
| // CCState - Info about the registers and stack slot. | |
| CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), | |
| getTargetMachine(), RVLocs, *DAG.getContext()); | |
| // Analize return values. | |
| CCInfo.AnalyzeReturn(Outs, RetCC_Mips); | |
| // If this is the first return lowered for this function, add | |
| // the regs to the liveout set for the function. | |
| if (DAG.getMachineFunction().getRegInfo().liveout_empty()) { | |
| for (unsigned i = 0; i != RVLocs.size(); ++i) | |
| if (RVLocs[i].isRegLoc()) | |
| DAG.getMachineFunction().getRegInfo().addLiveOut(RVLocs[i].getLocReg()); | |
| } | |
| SDValue Flag; | |
| // Copy the result values into the output registers. | |
| for (unsigned i = 0; i != RVLocs.size(); ++i) { | |
| CCValAssign &VA = RVLocs[i]; | |
| assert(VA.isRegLoc() && "Can only return in registers!"); | |
| Chain = DAG.getCopyToReg(Chain, dl, VA.getLocReg(), | |
| OutVals[i], Flag); | |
| // guarantee that all emitted copies are | |
| // stuck together, avoiding something bad | |
| Flag = Chain.getValue(1); | |
| } | |
| // The mips ABIs for returning structs by value requires that we copy | |
| // the sret argument into $v0 for the return. We saved the argument into | |
| // a virtual register in the entry block, so now we copy the value out | |
| // and into $v0. | |
| if (DAG.getMachineFunction().getFunction()->hasStructRetAttr()) { | |
| MachineFunction &MF = DAG.getMachineFunction(); | |
| MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); | |
| unsigned Reg = MipsFI->getSRetReturnReg(); | |
| if (!Reg) | |
| llvm_unreachable("sret virtual register not created in the entry block"); | |
| SDValue Val = DAG.getCopyFromReg(Chain, dl, Reg, getPointerTy()); | |
| Chain = DAG.getCopyToReg(Chain, dl, Mips::V0, Val, Flag); | |
| Flag = Chain.getValue(1); | |
| } | |
| // Return on Mips is always a "jr $ra" | |
| if (Flag.getNode()) | |
| return DAG.getNode(MipsISD::Ret, dl, MVT::Other, | |
| Chain, DAG.getRegister(Mips::RA, MVT::i32), Flag); | |
| else // Return Void | |
| return DAG.getNode(MipsISD::Ret, dl, MVT::Other, | |
| Chain, DAG.getRegister(Mips::RA, MVT::i32)); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Mips Inline Assembly Support | |
| //===----------------------------------------------------------------------===// | |
| /// getConstraintType - Given a constraint letter, return the type of | |
| /// constraint it is for this target. | |
| MipsTargetLowering::ConstraintType MipsTargetLowering:: | |
| getConstraintType(const std::string &Constraint) const | |
| { | |
| // Mips specific constrainy | |
| // GCC config/mips/constraints.md | |
| // | |
| // 'd' : An address register. Equivalent to r | |
| // unless generating MIPS16 code. | |
| // 'y' : Equivalent to r; retained for | |
| // backwards compatibility. | |
| // 'f' : Floating Point registers. | |
| if (Constraint.size() == 1) { | |
| switch (Constraint[0]) { | |
| default : break; | |
| case 'd': | |
| case 'y': | |
| case 'f': | |
| return C_RegisterClass; | |
| break; | |
| } | |
| } | |
| return TargetLowering::getConstraintType(Constraint); | |
| } | |
| /// Examine constraint type and operand type and determine a weight value. | |
| /// This object must already have been set up with the operand type | |
| /// and the current alternative constraint selected. | |
| TargetLowering::ConstraintWeight | |
| MipsTargetLowering::getSingleConstraintMatchWeight( | |
| AsmOperandInfo &info, const char *constraint) const { | |
| ConstraintWeight weight = CW_Invalid; | |
| Value *CallOperandVal = info.CallOperandVal; | |
| // If we don't have a value, we can't do a match, | |
| // but allow it at the lowest weight. | |
| if (CallOperandVal == NULL) | |
| return CW_Default; | |
| Type *type = CallOperandVal->getType(); | |
| // Look at the constraint type. | |
| switch (*constraint) { | |
| default: | |
| weight = TargetLowering::getSingleConstraintMatchWeight(info, constraint); | |
| break; | |
| case 'd': | |
| case 'y': | |
| if (type->isIntegerTy()) | |
| weight = CW_Register; | |
| break; | |
| case 'f': | |
| if (type->isFloatTy()) | |
| weight = CW_Register; | |
| break; | |
| } | |
| return weight; | |
| } | |
| /// Given a register class constraint, like 'r', if this corresponds directly | |
| /// to an LLVM register class, return a register of 0 and the register class | |
| /// pointer. | |
| std::pair<unsigned, const TargetRegisterClass*> MipsTargetLowering:: | |
| getRegForInlineAsmConstraint(const std::string &Constraint, EVT VT) const | |
| { | |
| if (Constraint.size() == 1) { | |
| switch (Constraint[0]) { | |
| case 'd': // Address register. Same as 'r' unless generating MIPS16 code. | |
| case 'y': // Same as 'r'. Exists for compatibility. | |
| case 'r': | |
| return std::make_pair(0U, Mips::CPURegsRegisterClass); | |
| case 'f': | |
| if (VT == MVT::f32) | |
| return std::make_pair(0U, Mips::FGR32RegisterClass); | |
| if (VT == MVT::f64) | |
| if ((!Subtarget->isSingleFloat()) && (!Subtarget->isFP64bit())) | |
| return std::make_pair(0U, Mips::AFGR64RegisterClass); | |
| break; | |
| } | |
| } | |
| return TargetLowering::getRegForInlineAsmConstraint(Constraint, VT); | |
| } | |
| bool | |
| MipsTargetLowering::isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const { | |
| // The Mips target isn't yet aware of offsets. | |
| return false; | |
| } | |
| bool MipsTargetLowering::isFPImmLegal(const APFloat &Imm, EVT VT) const { | |
| if (VT != MVT::f32 && VT != MVT::f64) | |
| return false; | |
| if (Imm.isNegZero()) | |
| return false; | |
| return Imm.isZero(); | |
| } |