src/Pipeline/SetupRoutine.cpp

// Copyright 2016 The SwiftShader Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//    http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include <Device/Vertex.hpp>
#include "SetupRoutine.hpp"

#include "Constants.hpp"
#include "Device/Primitive.hpp"
#include "Device/Polygon.hpp"
#include "Device/Renderer.hpp"
#include "Reactor/Reactor.hpp"

namespace sw {

SetupRoutine::SetupRoutine(const SetupProcessor::State &state) : state(state)
{
}

SetupRoutine::~SetupRoutine()
{
}

void SetupRoutine::generate()
{
	SetupFunction function;
	{
		Pointer<Byte> primitive(function.Arg<0>());
		Pointer<Byte> tri(function.Arg<1>());
		Pointer<Byte> polygon(function.Arg<2>());
		Pointer<Byte> data(function.Arg<3>());

		Pointer<Byte> constants = *Pointer<Pointer<Byte> >(data + OFFSET(DrawData,constants));

		const bool point = state.isDrawPoint;
		const bool line = state.isDrawLine;
		const bool triangle = state.isDrawTriangle;

		const int V0 = OFFSET(Triangle,v0);
		const int V1 = (triangle || line) ? OFFSET(Triangle,v1) : OFFSET(Triangle,v0);
		const int V2 = triangle ? OFFSET(Triangle,v2) : (line ? OFFSET(Triangle,v1) : OFFSET(Triangle,v0));

		Pointer<Byte> v0 = tri + V0;
		Pointer<Byte> v1 = tri + V1;
		Pointer<Byte> v2 = tri + V2;

		Array<Int> X(16);
		Array<Int> Y(16);

		X[0] = *Pointer<Int>(v0 + OFFSET(Vertex,projected.x));
		X[1] = *Pointer<Int>(v1 + OFFSET(Vertex,projected.x));
		X[2] = *Pointer<Int>(v2 + OFFSET(Vertex,projected.x));

		Y[0] = *Pointer<Int>(v0 + OFFSET(Vertex,projected.y));
		Y[1] = *Pointer<Int>(v1 + OFFSET(Vertex,projected.y));
		Y[2] = *Pointer<Int>(v2 + OFFSET(Vertex,projected.y));

		Int d = 1;     // Winding direction

		// Culling
		if(triangle)
		{
			Float x0 = Float(X[0]);
			Float x1 = Float(X[1]);
			Float x2 = Float(X[2]);

			Float y0 = Float(Y[0]);
			Float y1 = Float(Y[1]);
			Float y2 = Float(Y[2]);

			Float A = (y0 - y2) * x1 + (y2 - y1) * x0 + (y1 - y0) * x2;   // Area

			If(A == 0.0f)
			{
				Return(0);
			}

			Int w0w1w2 = *Pointer<Int>(v0 + OFFSET(Vertex, w)) ^
			             *Pointer<Int>(v1 + OFFSET(Vertex, w)) ^
			             *Pointer<Int>(v2 + OFFSET(Vertex, w));

			A = IfThenElse(w0w1w2 < 0, -A, A);

			Bool frontFacing = (state.frontFace == VK_FRONT_FACE_COUNTER_CLOCKWISE) ? A > 0.0f : A < 0.0f;

			if(state.cullMode & VK_CULL_MODE_FRONT_BIT)
			{
				If(frontFacing) Return(0);
			}
			if(state.cullMode & VK_CULL_MODE_BACK_BIT)
			{
				If(!frontFacing) Return(0);
			}

			d = IfThenElse(A > 0.0f, d, Int(0));

			If(frontFacing)
			{
				*Pointer<Byte8>(primitive + OFFSET(Primitive,clockwiseMask)) = Byte8(0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
				*Pointer<Byte8>(primitive + OFFSET(Primitive,invClockwiseMask)) = Byte8(0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
			}
			Else
			{
				*Pointer<Byte8>(primitive + OFFSET(Primitive,clockwiseMask)) = Byte8(0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
				*Pointer<Byte8>(primitive + OFFSET(Primitive,invClockwiseMask)) = Byte8(0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
			}
		}
		else
		{
			*Pointer<Byte8>(primitive + OFFSET(Primitive,clockwiseMask)) = Byte8(0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
			*Pointer<Byte8>(primitive + OFFSET(Primitive,invClockwiseMask)) = Byte8(0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
		}

		Int n = *Pointer<Int>(polygon + OFFSET(Polygon,n));
		Int m = *Pointer<Int>(polygon + OFFSET(Polygon,i));

		If(m != 0 || Bool(!triangle))   // Clipped triangle; reproject
		{
			Pointer<Byte> V = polygon + OFFSET(Polygon,P) + m * sizeof(void*) * 16;

			Int i = 0;

			Do
			{
				Pointer<Float4> p = *Pointer<Pointer<Float4> >(V + i * sizeof(void*));
				Float4 v = *Pointer<Float4>(p, 16);

				Float w = v.w;
				Float rhw = IfThenElse(w != 0.0f, 1.0f / w, Float(1.0f));

				X[i] = RoundInt(*Pointer<Float>(data + OFFSET(DrawData,X0xF)) + v.x * rhw * *Pointer<Float>(data + OFFSET(DrawData,WxF)));
				Y[i] = RoundInt(*Pointer<Float>(data + OFFSET(DrawData,Y0xF)) + v.y * rhw * *Pointer<Float>(data + OFFSET(DrawData,HxF)));

				i++;
			}
			Until(i >= n);
		}

		// Vertical range
		Int yMin = Y[0];
		Int yMax = Y[0];

		Int i = 1;

		Do
		{
			yMin = Min(Y[i], yMin);
			yMax = Max(Y[i], yMax);

			i++;
		}
		Until(i >= n);

		constexpr int subPixB = vk::SUBPIXEL_PRECISION_BITS;
		constexpr int subPixM = vk::SUBPIXEL_PRECISION_MASK;
		constexpr float subPixF = vk::SUBPIXEL_PRECISION_FACTOR;

		if(state.multiSample > 1)
		{
			yMin = (yMin + Constants::yMinMultiSampleOffset) >> subPixB;
			yMax = (yMax + Constants::yMaxMultiSampleOffset) >> subPixB;
		}
		else
		{
			yMin = (yMin + subPixM) >> subPixB;
			yMax = (yMax + subPixM) >> subPixB;
		}

		yMin = Max(yMin, *Pointer<Int>(data + OFFSET(DrawData,scissorY0)));
		yMax = Min(yMax, *Pointer<Int>(data + OFFSET(DrawData,scissorY1)));

		// If yMin and yMax are initially negative, the scissor clamping above will typically result
		// in yMin == 0 and yMax unchanged. We bail as we don't need to rasterize this primitive, and
		// code below assumes yMin < yMax.
		If(yMin >= yMax)
		{
			Return(0);
		}

		For(Int q = 0, q < state.multiSample, q++)
		{
			Array<Int> Xq(16);
			Array<Int> Yq(16);

			Int i = 0;

			Do
			{
				Xq[i] = X[i];
				Yq[i] = Y[i];

				if(state.multiSample > 1)
				{
					Xq[i] = Xq[i] + *Pointer<Int>(constants + OFFSET(Constants,Xf) + q * sizeof(int));
					Yq[i] = Yq[i] + *Pointer<Int>(constants + OFFSET(Constants,Yf) + q * sizeof(int));
				}

				i++;
			}
			Until(i >= n);

			Pointer<Byte> leftEdge = Pointer<Byte>(primitive + OFFSET(Primitive,outline->left)) + q * sizeof(Primitive);
			Pointer<Byte> rightEdge = Pointer<Byte>(primitive + OFFSET(Primitive,outline->right)) + q * sizeof(Primitive);

			if(state.multiSample > 1)
			{
				Int xMin = *Pointer<Int>(data + OFFSET(DrawData, scissorX0));
				Int xMax = *Pointer<Int>(data + OFFSET(DrawData, scissorX1));
				Short x = Short(Clamp((X[0] + subPixM) >> subPixB, xMin, xMax));

				For(Int y = yMin - 1, y < yMax + 1, y++)
				{
					*Pointer<Short>(leftEdge + y * sizeof(Primitive::Span)) = x;
					*Pointer<Short>(rightEdge + y * sizeof(Primitive::Span)) = x;
				}
			}

			Xq[n] = Xq[0];
			Yq[n] = Yq[0];

			// Rasterize
			{
				Int i = 0;

				Do
				{
					edge(primitive, data, Xq[i + 1 - d], Yq[i + 1 - d], Xq[i + d], Yq[i + d], q);

					i++;
				}
				Until(i >= n);
			}

			if(state.multiSample == 1)
			{
				For(, yMin < yMax && *Pointer<Short>(leftEdge + yMin * sizeof(Primitive::Span)) == *Pointer<Short>(rightEdge + yMin * sizeof(Primitive::Span)), yMin++)
				{
					// Increments yMin
				}

				For(, yMax > yMin && *Pointer<Short>(leftEdge + (yMax - 1) * sizeof(Primitive::Span)) == *Pointer<Short>(rightEdge + (yMax - 1) * sizeof(Primitive::Span)), yMax--)
				{
					// Decrements yMax
				}

				If(yMin == yMax)
				{
					Return(0);
				}

				*Pointer<Short>(leftEdge + (yMin - 1) * sizeof(Primitive::Span)) = *Pointer<Short>(leftEdge + yMin * sizeof(Primitive::Span));
				*Pointer<Short>(rightEdge + (yMin - 1) * sizeof(Primitive::Span)) = *Pointer<Short>(leftEdge + yMin * sizeof(Primitive::Span));
				*Pointer<Short>(leftEdge + yMax * sizeof(Primitive::Span)) = *Pointer<Short>(leftEdge + (yMax - 1) * sizeof(Primitive::Span));
				*Pointer<Short>(rightEdge + yMax * sizeof(Primitive::Span)) = *Pointer<Short>(leftEdge + (yMax - 1) * sizeof(Primitive::Span));
			}
		}

		*Pointer<Int>(primitive + OFFSET(Primitive,yMin)) = yMin;
		*Pointer<Int>(primitive + OFFSET(Primitive,yMax)) = yMax;

		// Sort by minimum y
		if(triangle)
		{
			Float y0 = *Pointer<Float>(v0 + OFFSET(Vertex, y));
			Float y1 = *Pointer<Float>(v1 + OFFSET(Vertex, y));
			Float y2 = *Pointer<Float>(v2 + OFFSET(Vertex, y));

			Float yMin = Min(Min(y0, y1), y2);

			conditionalRotate1(yMin == y1, v0, v1, v2);
			conditionalRotate2(yMin == y2, v0, v1, v2);
		}

		// Sort by maximum w
		if(triangle)
		{
			Float w0 = *Pointer<Float>(v0 + OFFSET(Vertex, w));
			Float w1 = *Pointer<Float>(v1 + OFFSET(Vertex, w));
			Float w2 = *Pointer<Float>(v2 + OFFSET(Vertex, w));

			Float wMax = Max(Max(w0, w1), w2);

			conditionalRotate1(wMax == w1, v0, v1, v2);
			conditionalRotate2(wMax == w2, v0, v1, v2);
		}

		Float w0 = *Pointer<Float>(v0 + OFFSET(Vertex, w));
		Float w1 = *Pointer<Float>(v1 + OFFSET(Vertex, w));
		Float w2 = *Pointer<Float>(v2 + OFFSET(Vertex, w));

		Float4 w012;

		w012.x = w0;
		w012.y = w1;
		w012.z = w2;
		w012.w = 1;

		Float rhw0 = *Pointer<Float>(v0 + OFFSET(Vertex,projected.w));

		Int X0 = *Pointer<Int>(v0 + OFFSET(Vertex,projected.x));
		Int X1 = *Pointer<Int>(v1 + OFFSET(Vertex,projected.x));
		Int X2 = *Pointer<Int>(v2 + OFFSET(Vertex,projected.x));

		Int Y0 = *Pointer<Int>(v0 + OFFSET(Vertex,projected.y));
		Int Y1 = *Pointer<Int>(v1 + OFFSET(Vertex,projected.y));
		Int Y2 = *Pointer<Int>(v2 + OFFSET(Vertex,projected.y));

		if(point)
		{
			*Pointer<Float>(primitive + OFFSET(Primitive, pointCoordX)) = Float(1.0f / subPixF) * Float(X0);
			*Pointer<Float>(primitive + OFFSET(Primitive, pointCoordY)) = Float(1.0f / subPixF) * Float(Y0);
		}

		if(line)
		{
			X2 = X1 + Y1 - Y0;
			Y2 = Y1 + X0 - X1;
		}

		Float dx = Float(X0) * (1.0f / subPixF);
		Float dy = Float(Y0) * (1.0f / subPixF);

		X1 -= X0;
		Y1 -= Y0;

		X2 -= X0;
		Y2 -= Y0;

		Float x1 = w1 * (1.0f / subPixF) * Float(X1);
		Float y1 = w1 * (1.0f / subPixF) * Float(Y1);

		Float x2 = w2 * (1.0f / subPixF) * Float(X2);
		Float y2 = w2 * (1.0f / subPixF) * Float(Y2);

		Float a = x1 * y2 - x2 * y1;

		Float4 xQuad = Float4(0, 1, 0, 1) - Float4(dx);
		Float4 yQuad = Float4(0, 0, 1, 1) - Float4(dy);

		*Pointer<Float4>(primitive + OFFSET(Primitive,xQuad), 16) = xQuad;
		*Pointer<Float4>(primitive + OFFSET(Primitive,yQuad), 16) = yQuad;

		Float4 M[3];

		M[0] = Float4(0, 0, 0, 0);
		M[1] = Float4(0, 0, 0, 0);
		M[2] = Float4(0, 0, 0, 0);

		M[0].z = rhw0;

		If(a != 0.0f)
		{
			Float A = 1.0f / a;
			Float D = A * rhw0;

			M[0].x = (y1 * w2 - y2 * w1) * D;
			M[0].y = (x2 * w1 - x1 * w2) * D;
		//	M[0].z = rhw0;
		//	M[0].w = 0;

			M[1].x = y2 * A;
			M[1].y = -x2 * A;
		//	M[1].z = 0;
		//	M[1].w = 0;

			M[2].x = -y1 * A;
			M[2].y = x1 * A;
		//	M[2].z = 0;
		//	M[2].w = 0;
		}

		if(state.interpolateW)
		{
			Float4 ABC = M[0] + M[1] + M[2];

			Float4 A = ABC.x;
			Float4 B = ABC.y;
			Float4 C = ABC.z;

			*Pointer<Float4>(primitive + OFFSET(Primitive,w.A), 16) = A;
			*Pointer<Float4>(primitive + OFFSET(Primitive,w.B), 16) = B;
			*Pointer<Float4>(primitive + OFFSET(Primitive,w.C), 16) = C;
		}

		if(state.interpolateZ)
		{
			Float z0 = *Pointer<Float>(v0 + OFFSET(Vertex,projected.z));
			Float z1 = *Pointer<Float>(v1 + OFFSET(Vertex,projected.z));
			Float z2 = *Pointer<Float>(v2 + OFFSET(Vertex,projected.z));

			z1 -= z0;
			z2 -= z0;

			Float4 A;
			Float4 B;
			Float4 C;

			if(!point)
			{
				Float x1 = Float(X1) * (1.0f / subPixF);
				Float y1 = Float(Y1) * (1.0f / subPixF);
				Float x2 = Float(X2) * (1.0f / subPixF);
				Float y2 = Float(Y2) * (1.0f / subPixF);

				Float D = *Pointer<Float>(data + OFFSET(DrawData,depthRange)) / (x1 * y2 - x2 * y1);

				Float a = (y2 * z1 - y1 * z2) * D;
				Float b = (x1 * z2 - x2 * z1) * D;

				A = Float4(a);
				B = Float4(b);
			}
			else
			{
				A = Float4(0, 0, 0, 0);
				B = Float4(0, 0, 0, 0);
			}

			*Pointer<Float4>(primitive + OFFSET(Primitive,z.A), 16) = A;
			*Pointer<Float4>(primitive + OFFSET(Primitive,z.B), 16) = B;

			Float c = z0;

			if(state.applySlopeDepthBias)
			{
				Float bias = Max(Abs(Float(A.x)), Abs(Float(B.x)));
				bias *= *Pointer<Float>(data + OFFSET(DrawData,slopeDepthBias));

				c += bias;
			}

			C = Float4(c * *Pointer<Float>(data + OFFSET(DrawData,depthRange)) + *Pointer<Float>(data + OFFSET(DrawData,depthNear)));

			*Pointer<Float4>(primitive + OFFSET(Primitive,z.C), 16) = C;
		}

		for(int interpolant = 0; interpolant < MAX_INTERFACE_COMPONENTS; interpolant++)
		{
			if(state.gradient[interpolant].Type != SpirvShader::ATTRIBTYPE_UNUSED)
			{
				setupGradient(primitive, tri, w012, M, v0, v1, v2,
						OFFSET(Vertex, v[interpolant]),
						OFFSET(Primitive, V[interpolant]),
						state.gradient[interpolant].Flat,
						!state.gradient[interpolant].NoPerspective);
			}
		}

		for(unsigned int i = 0; i < state.numClipDistances; i++)
		{
			setupGradient(primitive, tri, w012, M, v0, v1, v2,
					OFFSET(Vertex, clipDistance[i]),
					OFFSET(Primitive, clipDistance[i]),
					false, true);
		}

		for(unsigned int i = 0; i < state.numCullDistances; i++)
		{
			setupGradient(primitive, tri, w012, M, v0, v1, v2,
					OFFSET(Vertex, cullDistance[i]),
					OFFSET(Primitive, cullDistance[i]),
					false, true);
		}

		Return(1);
	}

	routine = function("SetupRoutine");
}

void SetupRoutine::setupGradient(Pointer<Byte> &primitive, Pointer<Byte> &triangle, Float4 &w012, Float4 (&m)[3], Pointer<Byte> &v0, Pointer<Byte> &v1, Pointer<Byte> &v2, int attribute, int planeEquation, bool flat, bool perspective)
{
	if(!flat)
	{
		Float4 i;
		i.x = *Pointer<Float>(v0 + attribute);
		i.y = *Pointer<Float>(v1 + attribute);
		i.z = *Pointer<Float>(v2 + attribute);
		i.w = 0;

		if(!perspective)
		{
			i *= w012;
		}

		Float4 A = i.xxxx * m[0];
		Float4 B = i.yyyy * m[1];
		Float4 C = i.zzzz * m[2];

		C = A + B + C;

		A = C.xxxx;
		B = C.yyyy;
		C = C.zzzz;

		*Pointer<Float4>(primitive + planeEquation + 0, 16) = A;
		*Pointer<Float4>(primitive + planeEquation + 16, 16) = B;
		*Pointer<Float4>(primitive + planeEquation + 32, 16) = C;
	}
	else
	{
		int leadingVertex = OFFSET(Triangle,v0);
		Float C = *Pointer<Float>(triangle + leadingVertex + attribute);

		*Pointer<Float4>(primitive + planeEquation + 0, 16) = Float4(0, 0, 0, 0);
		*Pointer<Float4>(primitive + planeEquation + 16, 16) = Float4(0, 0, 0, 0);
		*Pointer<Float4>(primitive + planeEquation + 32, 16) = Float4(C);
	}
}

void SetupRoutine::edge(Pointer<Byte> &primitive, Pointer<Byte> &data, const Int &Xa, const Int &Ya, const Int &Xb, const Int &Yb, Int &q)
{
	If(Ya != Yb)
	{
		Bool swap = Yb < Ya;

		Int X1 = IfThenElse(swap, Xb, Xa);
		Int X2 = IfThenElse(swap, Xa, Xb);
		Int Y1 = IfThenElse(swap, Yb, Ya);
		Int Y2 = IfThenElse(swap, Ya, Yb);

		constexpr int subPixB = vk::SUBPIXEL_PRECISION_BITS;
		constexpr int subPixM = vk::SUBPIXEL_PRECISION_MASK;

		Int y1 = Max((Y1 + subPixM) >> subPixB, *Pointer<Int>(data + OFFSET(DrawData,scissorY0)));
		Int y2 = Min((Y2 + subPixM) >> subPixB, *Pointer<Int>(data + OFFSET(DrawData,scissorY1)));

		If(y1 < y2)
		{
			Int xMin = *Pointer<Int>(data + OFFSET(DrawData,scissorX0));
			Int xMax = *Pointer<Int>(data + OFFSET(DrawData,scissorX1));

			Pointer<Byte> leftEdge = primitive + q * sizeof(Primitive) + OFFSET(Primitive,outline->left);
			Pointer<Byte> rightEdge = primitive + q * sizeof(Primitive) + OFFSET(Primitive,outline->right);
			Pointer<Byte> edge = IfThenElse(swap, rightEdge, leftEdge);

			// Deltas
			Int DX12 = X2 - X1;
			Int DY12 = Y2 - Y1;

			Int FDX12 = DX12 << subPixB;
			Int FDY12 = DY12 << subPixB;

			Int X = DX12 * ((y1 << subPixB) - Y1) + (X1 & subPixM) * DY12;
			Int x = (X1 >> subPixB) + X / FDY12;   // Edge
			Int d = X % FDY12;               // Error-term
			Int ceil = -d >> 31;             // Ceiling division: remainder <= 0
			x -= ceil;
			d -= ceil & FDY12;

			Int Q = FDX12 / FDY12;   // Edge-step
			Int R = FDX12 % FDY12;   // Error-step
			Int floor = R >> 31;     // Flooring division: remainder >= 0
			Q += floor;
			R += floor & FDY12;

			Int D = FDY12;   // Error-overflow
			Int y = y1;

			Do
			{
				*Pointer<Short>(edge + y * sizeof(Primitive::Span)) = Short(Clamp(x, xMin, xMax));

				x += Q;
				d += R;

				Int overflow = -d >> 31;

				d -= D & overflow;
				x -= overflow;

				y++;
			}
			Until(y >= y2);
		}
	}
}

void SetupRoutine::conditionalRotate1(Bool condition, Pointer<Byte> &v0, Pointer<Byte> &v1, Pointer<Byte> &v2)
{
	#if 0   // Rely on LLVM optimization
		If(condition)
		{
			Pointer<Byte> vX;

			vX = v0;
			v0 = v1;
			v1 = v2;
			v2 = vX;
		}
	#else
		Pointer<Byte> vX = v0;
		v0 = IfThenElse(condition, v1, v0);
		v1 = IfThenElse(condition, v2, v1);
		v2 = IfThenElse(condition, vX, v2);
	#endif
}

void SetupRoutine::conditionalRotate2(Bool condition, Pointer<Byte> &v0, Pointer<Byte> &v1, Pointer<Byte> &v2)
{
	#if 0   // Rely on LLVM optimization
		If(condition)
		{
			Pointer<Byte> vX;

			vX = v2;
			v2 = v1;
			v1 = v0;
			v0 = vX;
		}
	#else
		Pointer<Byte> vX = v2;
		v2 = IfThenElse(condition, v1, v2);
		v1 = IfThenElse(condition, v0, v1);
		v0 = IfThenElse(condition, vX, v0);
	#endif
}

SetupFunction::RoutineType SetupRoutine::getRoutine()
{
	return routine;
}

}  // namespace sw