third_party/llvm-7.0/llvm/docs/SourceLevelDebugging.rst

================================
Source Level Debugging with LLVM
================================

.. contents::
   :local:

Introduction
============

This document is the central repository for all information pertaining to debug
information in LLVM.  It describes the :ref:`actual format that the LLVM debug
information takes <format>`, which is useful for those interested in creating
front-ends or dealing directly with the information.  Further, this document
provides specific examples of what debug information for C/C++ looks like.

Philosophy behind LLVM debugging information
--------------------------------------------

The idea of the LLVM debugging information is to capture how the important
pieces of the source-language's Abstract Syntax Tree map onto LLVM code.
Several design aspects have shaped the solution that appears here.  The
important ones are:

* Debugging information should have very little impact on the rest of the
  compiler.  No transformations, analyses, or code generators should need to
  be modified because of debugging information.

* LLVM optimizations should interact in :ref:`well-defined and easily described
  ways <intro_debugopt>` with the debugging information.

* Because LLVM is designed to support arbitrary programming languages,
  LLVM-to-LLVM tools should not need to know anything about the semantics of
  the source-level-language.

* Source-level languages are often **widely** different from one another.
  LLVM should not put any restrictions of the flavor of the source-language,
  and the debugging information should work with any language.

* With code generator support, it should be possible to use an LLVM compiler
  to compile a program to native machine code and standard debugging
  formats.  This allows compatibility with traditional machine-code level
  debuggers, like GDB or DBX.

The approach used by the LLVM implementation is to use a small set of
:ref:`intrinsic functions <format_common_intrinsics>` to define a mapping
between LLVM program objects and the source-level objects.  The description of
the source-level program is maintained in LLVM metadata in an
:ref:`implementation-defined format <ccxx_frontend>` (the C/C++ front-end
currently uses working draft 7 of the `DWARF 3 standard
<http://www.eagercon.com/dwarf/dwarf3std.htm>`_).

When a program is being debugged, a debugger interacts with the user and turns
the stored debug information into source-language specific information.  As
such, a debugger must be aware of the source-language, and is thus tied to a
specific language or family of languages.

Debug information consumers
---------------------------

The role of debug information is to provide meta information normally stripped
away during the compilation process.  This meta information provides an LLVM
user a relationship between generated code and the original program source
code.

Currently, there are two backend consumers of debug info: DwarfDebug and
CodeViewDebug. DwarfDebug produces DWARF suitable for use with GDB, LLDB, and
other DWARF-based debuggers. :ref:`CodeViewDebug <codeview>` produces CodeView,
the Microsoft debug info format, which is usable with Microsoft debuggers such
as Visual Studio and WinDBG. LLVM's debug information format is mostly derived
from and inspired by DWARF, but it is feasible to translate into other target
debug info formats such as STABS.

It would also be reasonable to use debug information to feed profiling tools
for analysis of generated code, or, tools for reconstructing the original
source from generated code.

.. _intro_debugopt:

Debug information and optimizations
-----------------------------------

An extremely high priority of LLVM debugging information is to make it interact
well with optimizations and analysis.  In particular, the LLVM debug
information provides the following guarantees:

* LLVM debug information **always provides information to accurately read
  the source-level state of the program**, regardless of which LLVM
  optimizations have been run, and without any modification to the
  optimizations themselves.  However, some optimizations may impact the
  ability to modify the current state of the program with a debugger, such
  as setting program variables, or calling functions that have been
  deleted.

* As desired, LLVM optimizations can be upgraded to be aware of debugging
  information, allowing them to update the debugging information as they
  perform aggressive optimizations.  This means that, with effort, the LLVM
  optimizers could optimize debug code just as well as non-debug code.

* LLVM debug information does not prevent optimizations from
  happening (for example inlining, basic block reordering/merging/cleanup,
  tail duplication, etc).

* LLVM debug information is automatically optimized along with the rest of
  the program, using existing facilities.  For example, duplicate
  information is automatically merged by the linker, and unused information
  is automatically removed.

Basically, the debug information allows you to compile a program with
"``-O0 -g``" and get full debug information, allowing you to arbitrarily modify
the program as it executes from a debugger.  Compiling a program with
"``-O3 -g``" gives you full debug information that is always available and
accurate for reading (e.g., you get accurate stack traces despite tail call
elimination and inlining), but you might lose the ability to modify the program
and call functions which were optimized out of the program, or inlined away
completely.

The :ref:`LLVM test suite <test-suite-quickstart>` provides a framework to test
optimizer's handling of debugging information.  It can be run like this:

.. code-block:: bash

  % cd llvm/projects/test-suite/MultiSource/Benchmarks  # or some other level
  % make TEST=dbgopt

This will test impact of debugging information on optimization passes.  If
debugging information influences optimization passes then it will be reported
as a failure.  See :doc:`TestingGuide` for more information on LLVM test
infrastructure and how to run various tests.

.. _format:

Debugging information format
============================

LLVM debugging information has been carefully designed to make it possible for
the optimizer to optimize the program and debugging information without
necessarily having to know anything about debugging information.  In
particular, the use of metadata avoids duplicated debugging information from
the beginning, and the global dead code elimination pass automatically deletes
debugging information for a function if it decides to delete the function.

To do this, most of the debugging information (descriptors for types,
variables, functions, source files, etc) is inserted by the language front-end
in the form of LLVM metadata.

Debug information is designed to be agnostic about the target debugger and
debugging information representation (e.g. DWARF/Stabs/etc).  It uses a generic
pass to decode the information that represents variables, types, functions,
namespaces, etc: this allows for arbitrary source-language semantics and
type-systems to be used, as long as there is a module written for the target
debugger to interpret the information.

To provide basic functionality, the LLVM debugger does have to make some
assumptions about the source-level language being debugged, though it keeps
these to a minimum.  The only common features that the LLVM debugger assumes
exist are `source files <LangRef.html#difile>`_, and `program objects
<LangRef.html#diglobalvariable>`_.  These abstract objects are used by a
debugger to form stack traces, show information about local variables, etc.

This section of the documentation first describes the representation aspects
common to any source-language.  :ref:`ccxx_frontend` describes the data layout
conventions used by the C and C++ front-ends.

Debug information descriptors are `specialized metadata nodes
<LangRef.html#specialized-metadata>`_, first-class subclasses of ``Metadata``.

.. _format_common_intrinsics:

Debugger intrinsic functions
----------------------------

LLVM uses several intrinsic functions (name prefixed with "``llvm.dbg``") to
track source local variables through optimization and code generation.

``llvm.dbg.addr``
^^^^^^^^^^^^^^^^^^^^

.. code-block:: llvm

  void @llvm.dbg.addr(metadata, metadata, metadata)

This intrinsic provides information about a local element (e.g., variable).
The first argument is metadata holding the address of variable, typically a
static alloca in the function entry block.  The second argument is a
`local variable <LangRef.html#dilocalvariable>`_ containing a description of
the variable.  The third argument is a `complex expression
<LangRef.html#diexpression>`_.  An `llvm.dbg.addr` intrinsic describes the
*address* of a source variable.

.. code-block:: text

    %i.addr = alloca i32, align 4
    call void @llvm.dbg.addr(metadata i32* %i.addr, metadata !1,
                             metadata !DIExpression()), !dbg !2
    !1 = !DILocalVariable(name: "i", ...) ; int i
    !2 = !DILocation(...)
    ...
    %buffer = alloca [256 x i8], align 8
    ; The address of i is buffer+64.
    call void @llvm.dbg.addr(metadata [256 x i8]* %buffer, metadata !3,
                             metadata !DIExpression(DW_OP_plus, 64)), !dbg !4
    !3 = !DILocalVariable(name: "i", ...) ; int i
    !4 = !DILocation(...)

A frontend should generate exactly one call to ``llvm.dbg.addr`` at the point
of declaration of a source variable. Optimization passes that fully promote the
variable from memory to SSA values will replace this call with possibly
multiple calls to `llvm.dbg.value`. Passes that delete stores are effectively
partial promotion, and they will insert a mix of calls to ``llvm.dbg.value``
and ``llvm.dbg.addr`` to track the source variable value when it is available.
After optimization, there may be multiple calls to ``llvm.dbg.addr`` describing
the program points where the variables lives in memory. All calls for the same
concrete source variable must agree on the memory location.


``llvm.dbg.declare``
^^^^^^^^^^^^^^^^^^^^

.. code-block:: llvm

  void @llvm.dbg.declare(metadata, metadata, metadata)

This intrinsic is identical to `llvm.dbg.addr`, except that there can only be
one call to `llvm.dbg.declare` for a given concrete `local variable
<LangRef.html#dilocalvariable>`_. It is not control-dependent, meaning that if
a call to `llvm.dbg.declare` exists and has a valid location argument, that
address is considered to be the true home of the variable across its entire
lifetime. This makes it hard for optimizations to preserve accurate debug info
in the presence of ``llvm.dbg.declare``, so we are transitioning away from it,
and we plan to deprecate it in future LLVM releases.


``llvm.dbg.value``
^^^^^^^^^^^^^^^^^^

.. code-block:: llvm

  void @llvm.dbg.value(metadata, metadata, metadata)

This intrinsic provides information when a user source variable is set to a new
value.  The first argument is the new value (wrapped as metadata).  The second
argument is a `local variable <LangRef.html#dilocalvariable>`_ containing a
description of the variable.  The third argument is a `complex expression
<LangRef.html#diexpression>`_.

An `llvm.dbg.value` intrinsic describes the *value* of a source variable
directly, not its address.  Note that the value operand of this intrinsic may
be indirect (i.e, a pointer to the source variable), provided that interpreting
the complex expression derives the direct value.

Object lifetimes and scoping
============================

In many languages, the local variables in functions can have their lifetimes or
scopes limited to a subset of a function.  In the C family of languages, for
example, variables are only live (readable and writable) within the source
block that they are defined in.  In functional languages, values are only
readable after they have been defined.  Though this is a very obvious concept,
it is non-trivial to model in LLVM, because it has no notion of scoping in this
sense, and does not want to be tied to a language's scoping rules.

In order to handle this, the LLVM debug format uses the metadata attached to
llvm instructions to encode line number and scoping information.  Consider the
following C fragment, for example:

.. code-block:: c

  1.  void foo() {
  2.    int X = 21;
  3.    int Y = 22;
  4.    {
  5.      int Z = 23;
  6.      Z = X;
  7.    }
  8.    X = Y;
  9.  }

.. FIXME: Update the following example to use llvm.dbg.addr once that is the
   default in clang.

Compiled to LLVM, this function would be represented like this:

.. code-block:: text

  ; Function Attrs: nounwind ssp uwtable
  define void @foo() #0 !dbg !4 {
  entry:
    %X = alloca i32, align 4
    %Y = alloca i32, align 4
    %Z = alloca i32, align 4
    call void @llvm.dbg.declare(metadata i32* %X, metadata !11, metadata !13), !dbg !14
    store i32 21, i32* %X, align 4, !dbg !14
    call void @llvm.dbg.declare(metadata i32* %Y, metadata !15, metadata !13), !dbg !16
    store i32 22, i32* %Y, align 4, !dbg !16
    call void @llvm.dbg.declare(metadata i32* %Z, metadata !17, metadata !13), !dbg !19
    store i32 23, i32* %Z, align 4, !dbg !19
    %0 = load i32, i32* %X, align 4, !dbg !20
    store i32 %0, i32* %Z, align 4, !dbg !21
    %1 = load i32, i32* %Y, align 4, !dbg !22
    store i32 %1, i32* %X, align 4, !dbg !23
    ret void, !dbg !24
  }

  ; Function Attrs: nounwind readnone
  declare void @llvm.dbg.declare(metadata, metadata, metadata) #1

  attributes #0 = { nounwind ssp uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
  attributes #1 = { nounwind readnone }

  !llvm.dbg.cu = !{!0}
  !llvm.module.flags = !{!7, !8, !9}
  !llvm.ident = !{!10}

  !0 = !DICompileUnit(language: DW_LANG_C99, file: !1, producer: "clang version 3.7.0 (trunk 231150) (llvm/trunk 231154)", isOptimized: false, runtimeVersion: 0, emissionKind: FullDebug, enums: !2, retainedTypes: !2, subprograms: !3, globals: !2, imports: !2)
  !1 = !DIFile(filename: "/dev/stdin", directory: "/Users/dexonsmith/data/llvm/debug-info")
  !2 = !{}
  !3 = !{!4}
  !4 = distinct !DISubprogram(name: "foo", scope: !1, file: !1, line: 1, type: !5, isLocal: false, isDefinition: true, scopeLine: 1, isOptimized: false, variables: !2)
  !5 = !DISubroutineType(types: !6)
  !6 = !{null}
  !7 = !{i32 2, !"Dwarf Version", i32 2}
  !8 = !{i32 2, !"Debug Info Version", i32 3}
  !9 = !{i32 1, !"PIC Level", i32 2}
  !10 = !{!"clang version 3.7.0 (trunk 231150) (llvm/trunk 231154)"}
  !11 = !DILocalVariable(name: "X", scope: !4, file: !1, line: 2, type: !12)
  !12 = !DIBasicType(name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
  !13 = !DIExpression()
  !14 = !DILocation(line: 2, column: 9, scope: !4)
  !15 = !DILocalVariable(name: "Y", scope: !4, file: !1, line: 3, type: !12)
  !16 = !DILocation(line: 3, column: 9, scope: !4)
  !17 = !DILocalVariable(name: "Z", scope: !18, file: !1, line: 5, type: !12)
  !18 = distinct !DILexicalBlock(scope: !4, file: !1, line: 4, column: 5)
  !19 = !DILocation(line: 5, column: 11, scope: !18)
  !20 = !DILocation(line: 6, column: 11, scope: !18)
  !21 = !DILocation(line: 6, column: 9, scope: !18)
  !22 = !DILocation(line: 8, column: 9, scope: !4)
  !23 = !DILocation(line: 8, column: 7, scope: !4)
  !24 = !DILocation(line: 9, column: 3, scope: !4)


This example illustrates a few important details about LLVM debugging
information.  In particular, it shows how the ``llvm.dbg.declare`` intrinsic and
location information, which are attached to an instruction, are applied
together to allow a debugger to analyze the relationship between statements,
variable definitions, and the code used to implement the function.

.. code-block:: llvm

  call void @llvm.dbg.declare(metadata i32* %X, metadata !11, metadata !13), !dbg !14
    ; [debug line = 2:7] [debug variable = X]

The first intrinsic ``%llvm.dbg.declare`` encodes debugging information for the
variable ``X``.  The metadata ``!dbg !14`` attached to the intrinsic provides
scope information for the variable ``X``.

.. code-block:: text

  !14 = !DILocation(line: 2, column: 9, scope: !4)
  !4 = distinct !DISubprogram(name: "foo", scope: !1, file: !1, line: 1, type: !5,
                              isLocal: false, isDefinition: true, scopeLine: 1,
                              isOptimized: false, variables: !2)

Here ``!14`` is metadata providing `location information
<LangRef.html#dilocation>`_.  In this example, scope is encoded by ``!4``, a
`subprogram descriptor <LangRef.html#disubprogram>`_.  This way the location
information attached to the intrinsics indicates that the variable ``X`` is
declared at line number 2 at a function level scope in function ``foo``.

Now lets take another example.

.. code-block:: llvm

  call void @llvm.dbg.declare(metadata i32* %Z, metadata !17, metadata !13), !dbg !19
    ; [debug line = 5:9] [debug variable = Z]

The third intrinsic ``%llvm.dbg.declare`` encodes debugging information for
variable ``Z``.  The metadata ``!dbg !19`` attached to the intrinsic provides
scope information for the variable ``Z``.

.. code-block:: text

  !18 = distinct !DILexicalBlock(scope: !4, file: !1, line: 4, column: 5)
  !19 = !DILocation(line: 5, column: 11, scope: !18)

Here ``!19`` indicates that ``Z`` is declared at line number 5 and column
number 0 inside of lexical scope ``!18``.  The lexical scope itself resides
inside of subprogram ``!4`` described above.

The scope information attached with each instruction provides a straightforward
way to find instructions covered by a scope.

.. _ccxx_frontend:

C/C++ front-end specific debug information
==========================================

The C and C++ front-ends represent information about the program in a format
that is effectively identical to `DWARF 3.0
<http://www.eagercon.com/dwarf/dwarf3std.htm>`_ in terms of information
content.  This allows code generators to trivially support native debuggers by
generating standard dwarf information, and contains enough information for
non-dwarf targets to translate it as needed.

This section describes the forms used to represent C and C++ programs.  Other
languages could pattern themselves after this (which itself is tuned to
representing programs in the same way that DWARF 3 does), or they could choose
to provide completely different forms if they don't fit into the DWARF model.
As support for debugging information gets added to the various LLVM
source-language front-ends, the information used should be documented here.

The following sections provide examples of a few C/C++ constructs and the debug
information that would best describe those constructs.  The canonical
references are the ``DIDescriptor`` classes defined in
``include/llvm/IR/DebugInfo.h`` and the implementations of the helper functions
in ``lib/IR/DIBuilder.cpp``.

C/C++ source file information
-----------------------------

``llvm::Instruction`` provides easy access to metadata attached with an
instruction.  One can extract line number information encoded in LLVM IR using
``Instruction::getDebugLoc()`` and ``DILocation::getLine()``.

.. code-block:: c++

  if (DILocation *Loc = I->getDebugLoc()) { // Here I is an LLVM instruction
    unsigned Line = Loc->getLine();
    StringRef File = Loc->getFilename();
    StringRef Dir = Loc->getDirectory();
  }

C/C++ global variable information
---------------------------------

Given an integer global variable declared as follows:

.. code-block:: c

  _Alignas(8) int MyGlobal = 100;

a C/C++ front-end would generate the following descriptors:

.. code-block:: text

  ;;
  ;; Define the global itself.
  ;;
  @MyGlobal = global i32 100, align 8, !dbg !0

  ;;
  ;; List of debug info of globals
  ;;
  !llvm.dbg.cu = !{!1}

  ;; Some unrelated metadata.
  !llvm.module.flags = !{!6, !7}
  !llvm.ident = !{!8}

  ;; Define the global variable itself
  !0 = distinct !DIGlobalVariable(name: "MyGlobal", scope: !1, file: !2, line: 1, type: !5, isLocal: false, isDefinition: true, align: 64)

  ;; Define the compile unit.
  !1 = distinct !DICompileUnit(language: DW_LANG_C99, file: !2,
                               producer: "clang version 4.0.0 (http://llvm.org/git/clang.git ae4deadbea242e8ea517eef662c30443f75bd086) (http://llvm.org/git/llvm.git 818b4c1539df3e51dc7e62c89ead4abfd348827d)",
                               isOptimized: false, runtimeVersion: 0, emissionKind: FullDebug,
                               enums: !3, globals: !4)

  ;;
  ;; Define the file
  ;;
  !2 = !DIFile(filename: "/dev/stdin",
               directory: "/Users/dexonsmith/data/llvm/debug-info")

  ;; An empty array.
  !3 = !{}

  ;; The Array of Global Variables
  !4 = !{!0}

  ;;
  ;; Define the type
  ;;
  !5 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed)

  ;; Dwarf version to output.
  !6 = !{i32 2, !"Dwarf Version", i32 4}

  ;; Debug info schema version.
  !7 = !{i32 2, !"Debug Info Version", i32 3}

  ;; Compiler identification
  !8 = !{!"clang version 4.0.0 (http://llvm.org/git/clang.git ae4deadbea242e8ea517eef662c30443f75bd086) (http://llvm.org/git/llvm.git 818b4c1539df3e51dc7e62c89ead4abfd348827d)"}


The align value in DIGlobalVariable description specifies variable alignment in
case it was forced by C11 _Alignas(), C++11 alignas() keywords or compiler
attribute __attribute__((aligned ())). In other case (when this field is missing)
alignment is considered default. This is used when producing DWARF output
for DW_AT_alignment value.

C/C++ function information
--------------------------

Given a function declared as follows:

.. code-block:: c

  int main(int argc, char *argv[]) {
    return 0;
  }

a C/C++ front-end would generate the following descriptors:

.. code-block:: text

  ;;
  ;; Define the anchor for subprograms.
  ;;
  !4 = !DISubprogram(name: "main", scope: !1, file: !1, line: 1, type: !5,
                     isLocal: false, isDefinition: true, scopeLine: 1,
                     flags: DIFlagPrototyped, isOptimized: false,
                     variables: !2)

  ;;
  ;; Define the subprogram itself.
  ;;
  define i32 @main(i32 %argc, i8** %argv) !dbg !4 {
  ...
  }

Debugging information format
============================

Debugging Information Extension for Objective C Properties
----------------------------------------------------------

Introduction
^^^^^^^^^^^^

Objective C provides a simpler way to declare and define accessor methods using
declared properties.  The language provides features to declare a property and
to let compiler synthesize accessor methods.

The debugger lets developer inspect Objective C interfaces and their instance
variables and class variables.  However, the debugger does not know anything
about the properties defined in Objective C interfaces.  The debugger consumes
information generated by compiler in DWARF format.  The format does not support
encoding of Objective C properties.  This proposal describes DWARF extensions to
encode Objective C properties, which the debugger can use to let developers
inspect Objective C properties.

Proposal
^^^^^^^^

Objective C properties exist separately from class members.  A property can be
defined only by "setter" and "getter" selectors, and be calculated anew on each
access.  Or a property can just be a direct access to some declared ivar.
Finally it can have an ivar "automatically synthesized" for it by the compiler,
in which case the property can be referred to in user code directly using the
standard C dereference syntax as well as through the property "dot" syntax, but
there is no entry in the ``@interface`` declaration corresponding to this ivar.

To facilitate debugging, these properties we will add a new DWARF TAG into the
``DW_TAG_structure_type`` definition for the class to hold the description of a
given property, and a set of DWARF attributes that provide said description.
The property tag will also contain the name and declared type of the property.

If there is a related ivar, there will also be a DWARF property attribute placed
in the ``DW_TAG_member`` DIE for that ivar referring back to the property TAG
for that property.  And in the case where the compiler synthesizes the ivar
directly, the compiler is expected to generate a ``DW_TAG_member`` for that
ivar (with the ``DW_AT_artificial`` set to 1), whose name will be the name used
to access this ivar directly in code, and with the property attribute pointing
back to the property it is backing.

The following examples will serve as illustration for our discussion:

.. code-block:: objc

  @interface I1 {
    int n2;
  }

  @property int p1;
  @property int p2;
  @end

  @implementation I1
  @synthesize p1;
  @synthesize p2 = n2;
  @end

This produces the following DWARF (this is a "pseudo dwarfdump" output):

.. code-block:: none

  0x00000100:  TAG_structure_type [7] *
                 AT_APPLE_runtime_class( 0x10 )
                 AT_name( "I1" )
                 AT_decl_file( "Objc_Property.m" )
                 AT_decl_line( 3 )

  0x00000110    TAG_APPLE_property
                  AT_name ( "p1" )
                  AT_type ( {0x00000150} ( int ) )

  0x00000120:   TAG_APPLE_property
                  AT_name ( "p2" )
                  AT_type ( {0x00000150} ( int ) )

  0x00000130:   TAG_member [8]
                  AT_name( "_p1" )
                  AT_APPLE_property ( {0x00000110} "p1" )
                  AT_type( {0x00000150} ( int ) )
                  AT_artificial ( 0x1 )

  0x00000140:    TAG_member [8]
                   AT_name( "n2" )
                   AT_APPLE_property ( {0x00000120} "p2" )
                   AT_type( {0x00000150} ( int ) )

  0x00000150:  AT_type( ( int ) )

Note, the current convention is that the name of the ivar for an
auto-synthesized property is the name of the property from which it derives
with an underscore prepended, as is shown in the example.  But we actually
don't need to know this convention, since we are given the name of the ivar
directly.

Also, it is common practice in ObjC to have different property declarations in
the @interface and @implementation - e.g. to provide a read-only property in
the interface,and a read-write interface in the implementation.  In that case,
the compiler should emit whichever property declaration will be in force in the
current translation unit.

Developers can decorate a property with attributes which are encoded using
``DW_AT_APPLE_property_attribute``.

.. code-block:: objc

  @property (readonly, nonatomic) int pr;

.. code-block:: none

  TAG_APPLE_property [8]
    AT_name( "pr" )
    AT_type ( {0x00000147} (int) )
    AT_APPLE_property_attribute (DW_APPLE_PROPERTY_readonly, DW_APPLE_PROPERTY_nonatomic)

The setter and getter method names are attached to the property using
``DW_AT_APPLE_property_setter`` and ``DW_AT_APPLE_property_getter`` attributes.

.. code-block:: objc

  @interface I1
  @property (setter=myOwnP3Setter:) int p3;
  -(void)myOwnP3Setter:(int)a;
  @end

  @implementation I1
  @synthesize p3;
  -(void)myOwnP3Setter:(int)a{ }
  @end

The DWARF for this would be:

.. code-block:: none

  0x000003bd: TAG_structure_type [7] *
                AT_APPLE_runtime_class( 0x10 )
                AT_name( "I1" )
                AT_decl_file( "Objc_Property.m" )
                AT_decl_line( 3 )

  0x000003cd      TAG_APPLE_property
                    AT_name ( "p3" )
                    AT_APPLE_property_setter ( "myOwnP3Setter:" )
                    AT_type( {0x00000147} ( int ) )

  0x000003f3:     TAG_member [8]
                    AT_name( "_p3" )
                    AT_type ( {0x00000147} ( int ) )
                    AT_APPLE_property ( {0x000003cd} )
                    AT_artificial ( 0x1 )

New DWARF Tags
^^^^^^^^^^^^^^

+-----------------------+--------+
| TAG                   | Value  |
+=======================+========+
| DW_TAG_APPLE_property | 0x4200 |
+-----------------------+--------+

New DWARF Attributes
^^^^^^^^^^^^^^^^^^^^

+--------------------------------+--------+-----------+
| Attribute                      | Value  | Classes   |
+================================+========+===========+
| DW_AT_APPLE_property           | 0x3fed | Reference |
+--------------------------------+--------+-----------+
| DW_AT_APPLE_property_getter    | 0x3fe9 | String    |
+--------------------------------+--------+-----------+
| DW_AT_APPLE_property_setter    | 0x3fea | String    |
+--------------------------------+--------+-----------+
| DW_AT_APPLE_property_attribute | 0x3feb | Constant  |
+--------------------------------+--------+-----------+

New DWARF Constants
^^^^^^^^^^^^^^^^^^^

+--------------------------------------+-------+
| Name                                 | Value |
+======================================+=======+
| DW_APPLE_PROPERTY_readonly           | 0x01  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_getter             | 0x02  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_assign             | 0x04  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_readwrite          | 0x08  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_retain             | 0x10  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_copy               | 0x20  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_nonatomic          | 0x40  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_setter             | 0x80  |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_atomic             | 0x100 |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_weak               | 0x200 |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_strong             | 0x400 |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_unsafe_unretained  | 0x800 |
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_nullability        | 0x1000|
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_null_resettable    | 0x2000|
+--------------------------------------+-------+
| DW_APPLE_PROPERTY_class              | 0x4000|
+--------------------------------------+-------+

Name Accelerator Tables
-----------------------

Introduction
^^^^^^^^^^^^

The "``.debug_pubnames``" and "``.debug_pubtypes``" formats are not what a
debugger needs.  The "``pub``" in the section name indicates that the entries
in the table are publicly visible names only.  This means no static or hidden
functions show up in the "``.debug_pubnames``".  No static variables or private
class variables are in the "``.debug_pubtypes``".  Many compilers add different
things to these tables, so we can't rely upon the contents between gcc, icc, or
clang.

The typical query given by users tends not to match up with the contents of
these tables.  For example, the DWARF spec states that "In the case of the name
of a function member or static data member of a C++ structure, class or union,
the name presented in the "``.debug_pubnames``" section is not the simple name
given by the ``DW_AT_name attribute`` of the referenced debugging information
entry, but rather the fully qualified name of the data or function member."
So the only names in these tables for complex C++ entries is a fully
qualified name.  Debugger users tend not to enter their search strings as
"``a::b::c(int,const Foo&) const``", but rather as "``c``", "``b::c``" , or
"``a::b::c``".  So the name entered in the name table must be demangled in
order to chop it up appropriately and additional names must be manually entered
into the table to make it effective as a name lookup table for debuggers to
use.

All debuggers currently ignore the "``.debug_pubnames``" table as a result of
its inconsistent and useless public-only name content making it a waste of
space in the object file.  These tables, when they are written to disk, are not
sorted in any way, leaving every debugger to do its own parsing and sorting.
These tables also include an inlined copy of the string values in the table
itself making the tables much larger than they need to be on disk, especially
for large C++ programs.

Can't we just fix the sections by adding all of the names we need to this
table? No, because that is not what the tables are defined to contain and we
won't know the difference between the old bad tables and the new good tables.
At best we could make our own renamed sections that contain all of the data we
need.

These tables are also insufficient for what a debugger like LLDB needs.  LLDB
uses clang for its expression parsing where LLDB acts as a PCH.  LLDB is then
often asked to look for type "``foo``" or namespace "``bar``", or list items in
namespace "``baz``".  Namespaces are not included in the pubnames or pubtypes
tables.  Since clang asks a lot of questions when it is parsing an expression,
we need to be very fast when looking up names, as it happens a lot.  Having new
accelerator tables that are optimized for very quick lookups will benefit this
type of debugging experience greatly.

We would like to generate name lookup tables that can be mapped into memory
from disk, and used as is, with little or no up-front parsing.  We would also
be able to control the exact content of these different tables so they contain
exactly what we need.  The Name Accelerator Tables were designed to fix these
issues.  In order to solve these issues we need to:

* Have a format that can be mapped into memory from disk and used as is
* Lookups should be very fast
* Extensible table format so these tables can be made by many producers
* Contain all of the names needed for typical lookups out of the box
* Strict rules for the contents of tables

Table size is important and the accelerator table format should allow the reuse
of strings from common string tables so the strings for the names are not
duplicated.  We also want to make sure the table is ready to be used as-is by
simply mapping the table into memory with minimal header parsing.

The name lookups need to be fast and optimized for the kinds of lookups that
debuggers tend to do.  Optimally we would like to touch as few parts of the
mapped table as possible when doing a name lookup and be able to quickly find
the name entry we are looking for, or discover there are no matches.  In the
case of debuggers we optimized for lookups that fail most of the time.

Each table that is defined should have strict rules on exactly what is in the
accelerator tables and documented so clients can rely on the content.

Hash Tables
^^^^^^^^^^^

Standard Hash Tables
""""""""""""""""""""

Typical hash tables have a header, buckets, and each bucket points to the
bucket contents:

.. code-block:: none

  .------------.
  |  HEADER    |
  |------------|
  |  BUCKETS   |
  |------------|
  |  DATA      |
  `------------'

The BUCKETS are an array of offsets to DATA for each hash:

.. code-block:: none

  .------------.
  | 0x00001000 | BUCKETS[0]
  | 0x00002000 | BUCKETS[1]
  | 0x00002200 | BUCKETS[2]
  | 0x000034f0 | BUCKETS[3]
  |            | ...
  | 0xXXXXXXXX | BUCKETS[n_buckets]
  '------------'

So for ``bucket[3]`` in the example above, we have an offset into the table
0x000034f0 which points to a chain of entries for the bucket.  Each bucket must
contain a next pointer, full 32 bit hash value, the string itself, and the data
for the current string value.

.. code-block:: none

              .------------.
  0x000034f0: | 0x00003500 | next pointer
              | 0x12345678 | 32 bit hash
              | "erase"    | string value
              | data[n]    | HashData for this bucket
              |------------|
  0x00003500: | 0x00003550 | next pointer
              | 0x29273623 | 32 bit hash
              | "dump"     | string value
              | data[n]    | HashData for this bucket
              |------------|
  0x00003550: | 0x00000000 | next pointer
              | 0x82638293 | 32 bit hash
              | "main"     | string value
              | data[n]    | HashData for this bucket
              `------------'

The problem with this layout for debuggers is that we need to optimize for the
negative lookup case where the symbol we're searching for is not present.  So
if we were to lookup "``printf``" in the table above, we would make a 32-bit
hash for "``printf``", it might match ``bucket[3]``.  We would need to go to
the offset 0x000034f0 and start looking to see if our 32 bit hash matches.  To
do so, we need to read the next pointer, then read the hash, compare it, and
skip to the next bucket.  Each time we are skipping many bytes in memory and
touching new pages just to do the compare on the full 32 bit hash.  All of
these accesses then tell us that we didn't have a match.

Name Hash Tables
""""""""""""""""

To solve the issues mentioned above we have structured the hash tables a bit
differently: a header, buckets, an array of all unique 32 bit hash values,
followed by an array of hash value data offsets, one for each hash value, then
the data for all hash values:

.. code-block:: none

  .-------------.
  |  HEADER     |
  |-------------|
  |  BUCKETS    |
  |-------------|
  |  HASHES     |
  |-------------|
  |  OFFSETS    |
  |-------------|
  |  DATA       |
  `-------------'

The ``BUCKETS`` in the name tables are an index into the ``HASHES`` array.  By
making all of the full 32 bit hash values contiguous in memory, we allow
ourselves to efficiently check for a match while touching as little memory as
possible.  Most often checking the 32 bit hash values is as far as the lookup
goes.  If it does match, it usually is a match with no collisions.  So for a
table with "``n_buckets``" buckets, and "``n_hashes``" unique 32 bit hash
values, we can clarify the contents of the ``BUCKETS``, ``HASHES`` and
``OFFSETS`` as:

.. code-block:: none

  .-------------------------.
  |  HEADER.magic           | uint32_t
  |  HEADER.version         | uint16_t
  |  HEADER.hash_function   | uint16_t
  |  HEADER.bucket_count    | uint32_t
  |  HEADER.hashes_count    | uint32_t
  |  HEADER.header_data_len | uint32_t
  |  HEADER_DATA            | HeaderData
  |-------------------------|
  |  BUCKETS                | uint32_t[n_buckets] // 32 bit hash indexes
  |-------------------------|
  |  HASHES                 | uint32_t[n_hashes] // 32 bit hash values
  |-------------------------|
  |  OFFSETS                | uint32_t[n_hashes] // 32 bit offsets to hash value data
  |-------------------------|
  |  ALL HASH DATA          |
  `-------------------------'

So taking the exact same data from the standard hash example above we end up
with:

.. code-block:: none

              .------------.
              | HEADER     |
              |------------|
              |          0 | BUCKETS[0]
              |          2 | BUCKETS[1]
              |          5 | BUCKETS[2]
              |          6 | BUCKETS[3]
              |            | ...
              |        ... | BUCKETS[n_buckets]
              |------------|
              | 0x........ | HASHES[0]
              | 0x........ | HASHES[1]
              | 0x........ | HASHES[2]
              | 0x........ | HASHES[3]
              | 0x........ | HASHES[4]
              | 0x........ | HASHES[5]
              | 0x12345678 | HASHES[6]    hash for BUCKETS[3]
              | 0x29273623 | HASHES[7]    hash for BUCKETS[3]
              | 0x82638293 | HASHES[8]    hash for BUCKETS[3]
              | 0x........ | HASHES[9]
              | 0x........ | HASHES[10]
              | 0x........ | HASHES[11]
              | 0x........ | HASHES[12]
              | 0x........ | HASHES[13]
              | 0x........ | HASHES[n_hashes]
              |------------|
              | 0x........ | OFFSETS[0]
              | 0x........ | OFFSETS[1]
              | 0x........ | OFFSETS[2]
              | 0x........ | OFFSETS[3]
              | 0x........ | OFFSETS[4]
              | 0x........ | OFFSETS[5]
              | 0x000034f0 | OFFSETS[6]   offset for BUCKETS[3]
              | 0x00003500 | OFFSETS[7]   offset for BUCKETS[3]
              | 0x00003550 | OFFSETS[8]   offset for BUCKETS[3]
              | 0x........ | OFFSETS[9]
              | 0x........ | OFFSETS[10]
              | 0x........ | OFFSETS[11]
              | 0x........ | OFFSETS[12]
              | 0x........ | OFFSETS[13]
              | 0x........ | OFFSETS[n_hashes]
              |------------|
              |            |
              |            |
              |            |
              |            |
              |            |
              |------------|
  0x000034f0: | 0x00001203 | .debug_str ("erase")
              | 0x00000004 | A 32 bit array count - number of HashData with name "erase"
              | 0x........ | HashData[0]
              | 0x........ | HashData[1]
              | 0x........ | HashData[2]
              | 0x........ | HashData[3]
              | 0x00000000 | String offset into .debug_str (terminate data for hash)
              |------------|
  0x00003500: | 0x00001203 | String offset into .debug_str ("collision")
              | 0x00000002 | A 32 bit array count - number of HashData with name "collision"
              | 0x........ | HashData[0]
              | 0x........ | HashData[1]
              | 0x00001203 | String offset into .debug_str ("dump")
              | 0x00000003 | A 32 bit array count - number of HashData with name "dump"
              | 0x........ | HashData[0]
              | 0x........ | HashData[1]
              | 0x........ | HashData[2]
              | 0x00000000 | String offset into .debug_str (terminate data for hash)
              |------------|
  0x00003550: | 0x00001203 | String offset into .debug_str ("main")
              | 0x00000009 | A 32 bit array count - number of HashData with name "main"
              | 0x........ | HashData[0]
              | 0x........ | HashData[1]
              | 0x........ | HashData[2]
              | 0x........ | HashData[3]
              | 0x........ | HashData[4]
              | 0x........ | HashData[5]
              | 0x........ | HashData[6]
              | 0x........ | HashData[7]
              | 0x........ | HashData[8]
              | 0x00000000 | String offset into .debug_str (terminate data for hash)
              `------------'

So we still have all of the same data, we just organize it more efficiently for
debugger lookup.  If we repeat the same "``printf``" lookup from above, we
would hash "``printf``" and find it matches ``BUCKETS[3]`` by taking the 32 bit
hash value and modulo it by ``n_buckets``.  ``BUCKETS[3]`` contains "6" which
is the index into the ``HASHES`` table.  We would then compare any consecutive
32 bit hashes values in the ``HASHES`` array as long as the hashes would be in
``BUCKETS[3]``.  We do this by verifying that each subsequent hash value modulo
``n_buckets`` is still 3.  In the case of a failed lookup we would access the
memory for ``BUCKETS[3]``, and then compare a few consecutive 32 bit hashes
before we know that we have no match.  We don't end up marching through
multiple words of memory and we really keep the number of processor data cache
lines being accessed as small as possible.

The string hash that is used for these lookup tables is the Daniel J.
Bernstein hash which is also used in the ELF ``GNU_HASH`` sections.  It is a
very good hash for all kinds of names in programs with very few hash
collisions.

Empty buckets are designated by using an invalid hash index of ``UINT32_MAX``.

Details
^^^^^^^

These name hash tables are designed to be generic where specializations of the
table get to define additional data that goes into the header ("``HeaderData``"),
how the string value is stored ("``KeyType``") and the content of the data for each
hash value.

Header Layout
"""""""""""""

The header has a fixed part, and the specialized part.  The exact format of the
header is:

.. code-block:: c

  struct Header
  {
    uint32_t   magic;           // 'HASH' magic value to allow endian detection
    uint16_t   version;         // Version number
    uint16_t   hash_function;   // The hash function enumeration that was used
    uint32_t   bucket_count;    // The number of buckets in this hash table
    uint32_t   hashes_count;    // The total number of unique hash values and hash data offsets in this table
    uint32_t   header_data_len; // The bytes to skip to get to the hash indexes (buckets) for correct alignment
                                // Specifically the length of the following HeaderData field - this does not
                                // include the size of the preceding fields
    HeaderData header_data;     // Implementation specific header data
  };

The header starts with a 32 bit "``magic``" value which must be ``'HASH'``
encoded as an ASCII integer.  This allows the detection of the start of the
hash table and also allows the table's byte order to be determined so the table
can be correctly extracted.  The "``magic``" value is followed by a 16 bit
``version`` number which allows the table to be revised and modified in the
future.  The current version number is 1. ``hash_function`` is a ``uint16_t``
enumeration that specifies which hash function was used to produce this table.
The current values for the hash function enumerations include:

.. code-block:: c

  enum HashFunctionType
  {
    eHashFunctionDJB = 0u, // Daniel J Bernstein hash function
  };

``bucket_count`` is a 32 bit unsigned integer that represents how many buckets
are in the ``BUCKETS`` array.  ``hashes_count`` is the number of unique 32 bit
hash values that are in the ``HASHES`` array, and is the same number of offsets
are contained in the ``OFFSETS`` array.  ``header_data_len`` specifies the size
in bytes of the ``HeaderData`` that is filled in by specialized versions of
this table.

Fixed Lookup
""""""""""""

The header is followed by the buckets, hashes, offsets, and hash value data.

.. code-block:: c

  struct FixedTable
  {
    uint32_t buckets[Header.bucket_count];  // An array of hash indexes into the "hashes[]" array below
    uint32_t hashes [Header.hashes_count];  // Every unique 32 bit hash for the entire table is in this table
    uint32_t offsets[Header.hashes_count];  // An offset that corresponds to each item in the "hashes[]" array above
  };

``buckets`` is an array of 32 bit indexes into the ``hashes`` array.  The
``hashes`` array contains all of the 32 bit hash values for all names in the
hash table.  Each hash in the ``hashes`` table has an offset in the ``offsets``
array that points to the data for the hash value.

This table setup makes it very easy to repurpose these tables to contain
different data, while keeping the lookup mechanism the same for all tables.
This layout also makes it possible to save the table to disk and map it in
later and do very efficient name lookups with little or no parsing.

DWARF lookup tables can be implemented in a variety of ways and can store a lot
of information for each name.  We want to make the DWARF tables extensible and
able to store the data efficiently so we have used some of the DWARF features
that enable efficient data storage to define exactly what kind of data we store
for each name.

The ``HeaderData`` contains a definition of the contents of each HashData chunk.
We might want to store an offset to all of the debug information entries (DIEs)
for each name.  To keep things extensible, we create a list of items, or
Atoms, that are contained in the data for each name.  First comes the type of
the data in each atom:

.. code-block:: c

  enum AtomType
  {
    eAtomTypeNULL       = 0u,
    eAtomTypeDIEOffset  = 1u,   // DIE offset, check form for encoding
    eAtomTypeCUOffset   = 2u,   // DIE offset of the compiler unit header that contains the item in question
    eAtomTypeTag        = 3u,   // DW_TAG_xxx value, should be encoded as DW_FORM_data1 (if no tags exceed 255) or DW_FORM_data2
    eAtomTypeNameFlags  = 4u,   // Flags from enum NameFlags
    eAtomTypeTypeFlags  = 5u,   // Flags from enum TypeFlags
  };

The enumeration values and their meanings are:

.. code-block:: none

  eAtomTypeNULL       - a termination atom that specifies the end of the atom list
  eAtomTypeDIEOffset  - an offset into the .debug_info section for the DWARF DIE for this name
  eAtomTypeCUOffset   - an offset into the .debug_info section for the CU that contains the DIE
  eAtomTypeDIETag     - The DW_TAG_XXX enumeration value so you don't have to parse the DWARF to see what it is
  eAtomTypeNameFlags  - Flags for functions and global variables (isFunction, isInlined, isExternal...)
  eAtomTypeTypeFlags  - Flags for types (isCXXClass, isObjCClass, ...)

Then we allow each atom type to define the atom type and how the data for each
atom type data is encoded:

.. code-block:: c

  struct Atom
  {
    uint16_t type;  // AtomType enum value
    uint16_t form;  // DWARF DW_FORM_XXX defines
  };

The ``form`` type above is from the DWARF specification and defines the exact
encoding of the data for the Atom type.  See the DWARF specification for the
``DW_FORM_`` definitions.

.. code-block:: c

  struct HeaderData
  {
    uint32_t die_offset_base;
    uint32_t atom_count;
    Atoms    atoms[atom_count0];
  };

``HeaderData`` defines the base DIE offset that should be added to any atoms
that are encoded using the ``DW_FORM_ref1``, ``DW_FORM_ref2``,
``DW_FORM_ref4``, ``DW_FORM_ref8`` or ``DW_FORM_ref_udata``.  It also defines
what is contained in each ``HashData`` object -- ``Atom.form`` tells us how large
each field will be in the ``HashData`` and the ``Atom.type`` tells us how this data
should be interpreted.

For the current implementations of the "``.apple_names``" (all functions +
globals), the "``.apple_types``" (names of all types that are defined), and
the "``.apple_namespaces``" (all namespaces), we currently set the ``Atom``
array to be:

.. code-block:: c

  HeaderData.atom_count = 1;
  HeaderData.atoms[0].type = eAtomTypeDIEOffset;
  HeaderData.atoms[0].form = DW_FORM_data4;

This defines the contents to be the DIE offset (eAtomTypeDIEOffset) that is
encoded as a 32 bit value (DW_FORM_data4).  This allows a single name to have
multiple matching DIEs in a single file, which could come up with an inlined
function for instance.  Future tables could include more information about the
DIE such as flags indicating if the DIE is a function, method, block,
or inlined.

The KeyType for the DWARF table is a 32 bit string table offset into the
".debug_str" table.  The ".debug_str" is the string table for the DWARF which
may already contain copies of all of the strings.  This helps make sure, with
help from the compiler, that we reuse the strings between all of the DWARF
sections and keeps the hash table size down.  Another benefit to having the
compiler generate all strings as DW_FORM_strp in the debug info, is that
DWARF parsing can be made much faster.

After a lookup is made, we get an offset into the hash data.  The hash data
needs to be able to deal with 32 bit hash collisions, so the chunk of data
at the offset in the hash data consists of a triple:

.. code-block:: c

  uint32_t str_offset
  uint32_t hash_data_count
  HashData[hash_data_count]

If "str_offset" is zero, then the bucket contents are done. 99.9% of the
hash data chunks contain a single item (no 32 bit hash collision):

.. code-block:: none

  .------------.
  | 0x00001023 | uint32_t KeyType (.debug_str[0x0001023] => "main")
  | 0x00000004 | uint32_t HashData count
  | 0x........ | uint32_t HashData[0] DIE offset
  | 0x........ | uint32_t HashData[1] DIE offset
  | 0x........ | uint32_t HashData[2] DIE offset
  | 0x........ | uint32_t HashData[3] DIE offset
  | 0x00000000 | uint32_t KeyType (end of hash chain)
  `------------'

If there are collisions, you will have multiple valid string offsets:

.. code-block:: none

  .------------.
  | 0x00001023 | uint32_t KeyType (.debug_str[0x0001023] => "main")
  | 0x00000004 | uint32_t HashData count
  | 0x........ | uint32_t HashData[0] DIE offset
  | 0x........ | uint32_t HashData[1] DIE offset
  | 0x........ | uint32_t HashData[2] DIE offset
  | 0x........ | uint32_t HashData[3] DIE offset
  | 0x00002023 | uint32_t KeyType (.debug_str[0x0002023] => "print")
  | 0x00000002 | uint32_t HashData count
  | 0x........ | uint32_t HashData[0] DIE offset
  | 0x........ | uint32_t HashData[1] DIE offset
  | 0x00000000 | uint32_t KeyType (end of hash chain)
  `------------'

Current testing with real world C++ binaries has shown that there is around 1
32 bit hash collision per 100,000 name entries.

Contents
^^^^^^^^

As we said, we want to strictly define exactly what is included in the
different tables.  For DWARF, we have 3 tables: "``.apple_names``",
"``.apple_types``", and "``.apple_namespaces``".

"``.apple_names``" sections should contain an entry for each DWARF DIE whose
``DW_TAG`` is a ``DW_TAG_label``, ``DW_TAG_inlined_subroutine``, or
``DW_TAG_subprogram`` that has address attributes: ``DW_AT_low_pc``,
``DW_AT_high_pc``, ``DW_AT_ranges`` or ``DW_AT_entry_pc``.  It also contains
``DW_TAG_variable`` DIEs that have a ``DW_OP_addr`` in the location (global and
static variables).  All global and static variables should be included,
including those scoped within functions and classes.  For example using the
following code:

.. code-block:: c

  static int var = 0;

  void f ()
  {
    static int var = 0;
  }

Both of the static ``var`` variables would be included in the table.  All
functions should emit both their full names and their basenames.  For C or C++,
the full name is the mangled name (if available) which is usually in the
``DW_AT_MIPS_linkage_name`` attribute, and the ``DW_AT_name`` contains the
function basename.  If global or static variables have a mangled name in a
``DW_AT_MIPS_linkage_name`` attribute, this should be emitted along with the
simple name found in the ``DW_AT_name`` attribute.

"``.apple_types``" sections should contain an entry for each DWARF DIE whose
tag is one of:

* DW_TAG_array_type
* DW_TAG_class_type
* DW_TAG_enumeration_type
* DW_TAG_pointer_type
* DW_TAG_reference_type
* DW_TAG_string_type
* DW_TAG_structure_type
* DW_TAG_subroutine_type
* DW_TAG_typedef
* DW_TAG_union_type
* DW_TAG_ptr_to_member_type
* DW_TAG_set_type
* DW_TAG_subrange_type
* DW_TAG_base_type
* DW_TAG_const_type
* DW_TAG_file_type
* DW_TAG_namelist
* DW_TAG_packed_type
* DW_TAG_volatile_type
* DW_TAG_restrict_type
* DW_TAG_atomic_type
* DW_TAG_interface_type
* DW_TAG_unspecified_type
* DW_TAG_shared_type

Only entries with a ``DW_AT_name`` attribute are included, and the entry must
not be a forward declaration (``DW_AT_declaration`` attribute with a non-zero
value).  For example, using the following code:

.. code-block:: c

  int main ()
  {
    int *b = 0;
    return *b;
  }

We get a few type DIEs:

.. code-block:: none

  0x00000067:     TAG_base_type [5]
                  AT_encoding( DW_ATE_signed )
                  AT_name( "int" )
                  AT_byte_size( 0x04 )

  0x0000006e:     TAG_pointer_type [6]
                  AT_type( {0x00000067} ( int ) )
                  AT_byte_size( 0x08 )

The DW_TAG_pointer_type is not included because it does not have a ``DW_AT_name``.

"``.apple_namespaces``" section should contain all ``DW_TAG_namespace`` DIEs.
If we run into a namespace that has no name this is an anonymous namespace, and
the name should be output as "``(anonymous namespace)``" (without the quotes).
Why?  This matches the output of the ``abi::cxa_demangle()`` that is in the
standard C++ library that demangles mangled names.


Language Extensions and File Format Changes
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Objective-C Extensions
""""""""""""""""""""""

"``.apple_objc``" section should contain all ``DW_TAG_subprogram`` DIEs for an
Objective-C class.  The name used in the hash table is the name of the
Objective-C class itself.  If the Objective-C class has a category, then an
entry is made for both the class name without the category, and for the class
name with the category.  So if we have a DIE at offset 0x1234 with a name of
method "``-[NSString(my_additions) stringWithSpecialString:]``", we would add
an entry for "``NSString``" that points to DIE 0x1234, and an entry for
"``NSString(my_additions)``" that points to 0x1234.  This allows us to quickly
track down all Objective-C methods for an Objective-C class when doing
expressions.  It is needed because of the dynamic nature of Objective-C where
anyone can add methods to a class.  The DWARF for Objective-C methods is also
emitted differently from C++ classes where the methods are not usually
contained in the class definition, they are scattered about across one or more
compile units.  Categories can also be defined in different shared libraries.
So we need to be able to quickly find all of the methods and class functions
given the Objective-C class name, or quickly find all methods and class
functions for a class + category name.  This table does not contain any
selector names, it just maps Objective-C class names (or class names +
category) to all of the methods and class functions.  The selectors are added
as function basenames in the "``.debug_names``" section.

In the "``.apple_names``" section for Objective-C functions, the full name is
the entire function name with the brackets ("``-[NSString
stringWithCString:]``") and the basename is the selector only
("``stringWithCString:``").

Mach-O Changes
""""""""""""""

The sections names for the apple hash tables are for non-mach-o files.  For
mach-o files, the sections should be contained in the ``__DWARF`` segment with
names as follows:

* "``.apple_names``" -> "``__apple_names``"
* "``.apple_types``" -> "``__apple_types``"
* "``.apple_namespaces``" -> "``__apple_namespac``" (16 character limit)
* "``.apple_objc``" -> "``__apple_objc``"

.. _codeview:

CodeView Debug Info Format
==========================

LLVM supports emitting CodeView, the Microsoft debug info format, and this
section describes the design and implementation of that support.

Format Background
-----------------

CodeView as a format is clearly oriented around C++ debugging, and in C++, the
majority of debug information tends to be type information. Therefore, the
overriding design constraint of CodeView is the separation of type information
from other "symbol" information so that type information can be efficiently
merged across translation units. Both type information and symbol information is
generally stored as a sequence of records, where each record begins with a
16-bit record size and a 16-bit record kind.

Type information is usually stored in the ``.debug$T`` section of the object
file.  All other debug info, such as line info, string table, symbol info, and
inlinee info, is stored in one or more ``.debug$S`` sections. There may only be
one ``.debug$T`` section per object file, since all other debug info refers to
it. If a PDB (enabled by the ``/Zi`` MSVC option) was used during compilation,
the ``.debug$T`` section will contain only an ``LF_TYPESERVER2`` record pointing
to the PDB. When using PDBs, symbol information appears to remain in the object
file ``.debug$S`` sections.

Type records are referred to by their index, which is the number of records in
the stream before a given record plus ``0x1000``. Many common basic types, such
as the basic integral types and unqualified pointers to them, are represented
using type indices less than ``0x1000``. Such basic types are built in to
CodeView consumers and do not require type records.

Each type record may only contain type indices that are less than its own type
index. This ensures that the graph of type stream references is acyclic. While
the source-level type graph may contain cycles through pointer types (consider a
linked list struct), these cycles are removed from the type stream by always
referring to the forward declaration record of user-defined record types. Only
"symbol" records in the ``.debug$S`` streams may refer to complete,
non-forward-declaration type records.

Working with CodeView
---------------------

These are instructions for some common tasks for developers working to improve
LLVM's CodeView support. Most of them revolve around using the CodeView dumper
embedded in ``llvm-readobj``.

* Testing MSVC's output::

    $ cl -c -Z7 foo.cpp # Use /Z7 to keep types in the object file
    $ llvm-readobj -codeview foo.obj

* Getting LLVM IR debug info out of Clang::

    $ clang -g -gcodeview --target=x86_64-windows-msvc foo.cpp -S -emit-llvm

  Use this to generate LLVM IR for LLVM test cases.

* Generate and dump CodeView from LLVM IR metadata::

    $ llc foo.ll -filetype=obj -o foo.obj
    $ llvm-readobj -codeview foo.obj > foo.txt

  Use this pattern in lit test cases and FileCheck the output of llvm-readobj

Improving LLVM's CodeView support is a process of finding interesting type
records, constructing a C++ test case that makes MSVC emit those records,
dumping the records, understanding them, and then generating equivalent records
in LLVM's backend.

Testing Debug Info Preservation in Optimizations
================================================

The following paragraphs are an introduction to the debugify utility
and examples of how to use it in regression tests to check debug info
preservation after optimizations.

The ``debugify`` utility
------------------------

The ``debugify`` synthetic debug info testing utility consists of two
main parts. The ``debugify`` pass and the ``check-debugify`` one. They are
meant to be used with ``opt`` for development purposes.

The first applies synthetic debug information to every instruction of the module,
while the latter checks that this DI is still available after an optimization
has occurred, reporting any errors/warnings while doing so.

The instructions are assigned sequentially increasing line locations,
and are immediately used by debug value intrinsics when possible.

For example, here is a module before:

.. code-block:: llvm

   define dso_local void @f(i32* %x) {
   entry:
     %x.addr = alloca i32*, align 8
     store i32* %x, i32** %x.addr, align 8
     %0 = load i32*, i32** %x.addr, align 8
     store i32 10, i32* %0, align 4
     ret void
   }

and after running ``opt -debugify``  on it we get:

.. code-block:: llvm

   define dso_local void @f(i32* %x) !dbg !6 {
   entry:
     %x.addr = alloca i32*, align 8, !dbg !12
     call void @llvm.dbg.value(metadata i32** %x.addr, metadata !9, metadata !DIExpression()), !dbg !12
     store i32* %x, i32** %x.addr, align 8, !dbg !13
     %0 = load i32*, i32** %x.addr, align 8, !dbg !14
     call void @llvm.dbg.value(metadata i32* %0, metadata !11, metadata !DIExpression()), !dbg !14
     store i32 10, i32* %0, align 4, !dbg !15
     ret void, !dbg !16
   }

   !llvm.dbg.cu = !{!0}
   !llvm.debugify = !{!3, !4}
   !llvm.module.flags = !{!5}

   !0 = distinct !DICompileUnit(language: DW_LANG_C, file: !1, producer: "debugify", isOptimized: true, runtimeVersion: 0, emissionKind: FullDebug, enums: !2)
   !1 = !DIFile(filename: "debugify-sample.ll", directory: "/")
   !2 = !{}
   !3 = !{i32 5}
   !4 = !{i32 2}
   !5 = !{i32 2, !"Debug Info Version", i32 3}
   !6 = distinct !DISubprogram(name: "f", linkageName: "f", scope: null, file: !1, line: 1, type: !7, isLocal: false, isDefinition: true, scopeLine: 1, isOptimized: true, unit: !0, retainedNodes: !8)
   !7 = !DISubroutineType(types: !2)
   !8 = !{!9, !11}
   !9 = !DILocalVariable(name: "1", scope: !6, file: !1, line: 1, type: !10)
   !10 = !DIBasicType(name: "ty64", size: 64, encoding: DW_ATE_unsigned)
   !11 = !DILocalVariable(name: "2", scope: !6, file: !1, line: 3, type: !10)
   !12 = !DILocation(line: 1, column: 1, scope: !6)
   !13 = !DILocation(line: 2, column: 1, scope: !6)
   !14 = !DILocation(line: 3, column: 1, scope: !6)
   !15 = !DILocation(line: 4, column: 1, scope: !6)
   !16 = !DILocation(line: 5, column: 1, scope: !6)

The following is an example of the -check-debugify output:

.. code-block:: none

   $ opt -enable-debugify -loop-vectorize llvm/test/Transforms/LoopVectorize/i8-induction.ll -disable-output
   ERROR: Instruction with empty DebugLoc in function f --  %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]

Errors/warnings can range from instructions with empty debug location to an
instruction having a type that's incompatible with the source variable it describes,
all the way to missing lines and missing debug value intrinsics.

Fixing errors
^^^^^^^^^^^^^

Each of the errors above has a relevant API available to fix it.

* In the case of missing debug location, ``Instruction::setDebugLoc`` or possibly
  ``IRBuilder::setCurrentDebugLocation`` when using a Builder and the new location
  should be reused.

* When a debug value has incompatible type ``llvm::replaceAllDbgUsesWith`` can be used.
  After a RAUW call an incompatible type error can occur because RAUW does not handle
  widening and narrowing of variables while ``llvm::replaceAllDbgUsesWith`` does. It is
  also capable of changing the DWARF expression used by the debugger to describe the variable.
  It also prevents use-before-def by salvaging or deleting invalid debug values.

* When a debug value is missing ``llvm::salvageDebugInfo`` can be used when no replacement
  exists, or ``llvm::replaceAllDbgUsesWith`` when a replacement exists.

Using ``debugify``
------------------

In order for ``check-debugify`` to work, the DI must be coming from
``debugify``. Thus, modules with existing DI will be skipped.

The most straightforward way to use ``debugify`` is as follows::

  $ opt -debugify -pass-to-test -check-debugify sample.ll

This will inject synthetic DI to ``sample.ll`` run the ``pass-to-test``
and then check for missing DI.

Some other ways to run debugify are avaliable:

.. code-block:: bash

   # Same as the above example.
   $ opt -enable-debugify -pass-to-test sample.ll

   # Suppresses verbose debugify output.
   $ opt -enable-debugify -debugify-quiet -pass-to-test sample.ll

   # Prepend -debugify before and append -check-debugify -strip after
   # each pass on the pipeline (similar to -verify-each).
   $ opt -debugify-each -O2 sample.ll

``debugify`` can also be used to test a backend, e.g:

.. code-block:: bash

   $ opt -debugify < sample.ll | llc -o -

``debugify`` in regression tests
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ``-debugify`` pass is especially helpful when it comes to testing that
a given pass preserves DI while transforming the module. For this to work,
the ``-debugify`` output must be stable enough to use in regression tests.
Changes to this pass are not allowed to break existing tests.

It allows us to test for DI loss in the same tests we check that the
transformation is actually doing what it should.

Here is an example from ``test/Transforms/InstCombine/cast-mul-select.ll``:

.. code-block:: llvm

   ; RUN: opt < %s -debugify -instcombine -S | FileCheck %s --check-prefix=DEBUGINFO

   define i32 @mul(i32 %x, i32 %y) {
   ; DBGINFO-LABEL: @mul(
   ; DBGINFO-NEXT:    [[C:%.*]] = mul i32 {{.*}}
   ; DBGINFO-NEXT:    call void @llvm.dbg.value(metadata i32 [[C]]
   ; DBGINFO-NEXT:    [[D:%.*]] = and i32 {{.*}}
   ; DBGINFO-NEXT:    call void @llvm.dbg.value(metadata i32 [[D]]

     %A = trunc i32 %x to i8
     %B = trunc i32 %y to i8
     %C = mul i8 %A, %B
     %D = zext i8 %C to i32
     ret i32 %D
   }

Here we test that the two ``dbg.value`` instrinsics are preserved and
are correctly pointing to the ``[[C]]`` and ``[[D]]`` variables.

.. note::

   Note, that when writing this kind of regression tests, it is important
   to make them as robust as possible. That's why we should try to avoid
   hardcoding line/variable numbers in check lines. If for example you test
   for a ``DILocation`` to have a specific line number, and someone later adds
   an instruction before the one we check the test will fail. In the cases this
   can't be avoided (say, if a test wouldn't be precise enough), moving the
   test to it's own file is preferred.