| // Copyright (c) 2016 Google Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Ensures Data Rules are followed according to the specifications. |
| |
| #include "source/val/validate.h" |
| |
| #include <cassert> |
| #include <sstream> |
| #include <string> |
| |
| #include "source/diagnostic.h" |
| #include "source/opcode.h" |
| #include "source/operand.h" |
| #include "source/val/instruction.h" |
| #include "source/val/validation_state.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| // Validates that the number of components in the vector is valid. |
| // Vector types can only be parameterized as having 2, 3, or 4 components. |
| // If the Vector16 capability is added, 8 and 16 components are also allowed. |
| spv_result_t ValidateVecNumComponents(ValidationState_t& _, |
| const Instruction* inst) { |
| // Operand 2 specifies the number of components in the vector. |
| auto num_components = inst->GetOperandAs<const uint32_t>(2); |
| if (num_components == 2 || num_components == 3 || num_components == 4) { |
| return SPV_SUCCESS; |
| } |
| if (num_components == 8 || num_components == 16) { |
| if (_.HasCapability(SpvCapabilityVector16)) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Having " << num_components << " components for " |
| << spvOpcodeString(inst->opcode()) |
| << " requires the Vector16 capability"; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Illegal number of components (" << num_components << ") for " |
| << spvOpcodeString(inst->opcode()); |
| } |
| |
| // Validates that the number of bits specifed for a float type is valid. |
| // Scalar floating-point types can be parameterized only with 32-bits. |
| // Float16 capability allows using a 16-bit OpTypeFloat. |
| // Float16Buffer capability allows creation of a 16-bit OpTypeFloat. |
| // Float64 capability allows using a 64-bit OpTypeFloat. |
| spv_result_t ValidateFloatSize(ValidationState_t& _, const Instruction* inst) { |
| // Operand 1 is the number of bits for this float |
| auto num_bits = inst->GetOperandAs<const uint32_t>(1); |
| if (num_bits == 32) { |
| return SPV_SUCCESS; |
| } |
| if (num_bits == 16) { |
| if (_.features().declare_float16_type) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Using a 16-bit floating point " |
| << "type requires the Float16 or Float16Buffer capability," |
| " or an extension that explicitly enables 16-bit floating point."; |
| } |
| if (num_bits == 64) { |
| if (_.HasCapability(SpvCapabilityFloat64)) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Using a 64-bit floating point " |
| << "type requires the Float64 capability."; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Invalid number of bits (" << num_bits << ") used for OpTypeFloat."; |
| } |
| |
| // Validates that the number of bits specified for an Int type is valid. |
| // Scalar integer types can be parameterized only with 32-bits. |
| // Int8, Int16, and Int64 capabilities allow using 8-bit, 16-bit, and 64-bit |
| // integers, respectively. |
| spv_result_t ValidateIntSize(ValidationState_t& _, const Instruction* inst) { |
| // Operand 1 is the number of bits for this integer. |
| auto num_bits = inst->GetOperandAs<const uint32_t>(1); |
| if (num_bits == 32) { |
| return SPV_SUCCESS; |
| } |
| if (num_bits == 8) { |
| if (_.features().declare_int8_type) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Using an 8-bit integer type requires the Int8 capability," |
| " or an extension that explicitly enables 8-bit integers."; |
| } |
| if (num_bits == 16) { |
| if (_.features().declare_int16_type) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Using a 16-bit integer type requires the Int16 capability," |
| " or an extension that explicitly enables 16-bit integers."; |
| } |
| if (num_bits == 64) { |
| if (_.HasCapability(SpvCapabilityInt64)) { |
| return SPV_SUCCESS; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Using a 64-bit integer type requires the Int64 capability."; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Invalid number of bits (" << num_bits << ") used for OpTypeInt."; |
| } |
| |
| // Validates that the matrix is parameterized with floating-point types. |
| spv_result_t ValidateMatrixColumnType(ValidationState_t& _, |
| const Instruction* inst) { |
| // Find the component type of matrix columns (must be vector). |
| // Operand 1 is the <id> of the type specified for matrix columns. |
| auto type_id = inst->GetOperandAs<const uint32_t>(1); |
| auto col_type_instr = _.FindDef(type_id); |
| if (col_type_instr->opcode() != SpvOpTypeVector) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Columns in a matrix must be of type vector."; |
| } |
| |
| // Trace back once more to find out the type of components in the vector. |
| // Operand 1 is the <id> of the type of data in the vector. |
| auto comp_type_id = |
| col_type_instr->words()[col_type_instr->operands()[1].offset]; |
| auto comp_type_instruction = _.FindDef(comp_type_id); |
| if (comp_type_instruction->opcode() != SpvOpTypeFloat) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) << "Matrix types can only be " |
| "parameterized with " |
| "floating-point types."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Validates that the matrix has 2,3, or 4 columns. |
| spv_result_t ValidateMatrixNumCols(ValidationState_t& _, |
| const Instruction* inst) { |
| // Operand 2 is the number of columns in the matrix. |
| auto num_cols = inst->GetOperandAs<const uint32_t>(2); |
| if (num_cols != 2 && num_cols != 3 && num_cols != 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) << "Matrix types can only be " |
| "parameterized as having " |
| "only 2, 3, or 4 columns."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Validates that OpSpecConstant specializes to either int or float type. |
| spv_result_t ValidateSpecConstNumerical(ValidationState_t& _, |
| const Instruction* inst) { |
| // Operand 0 is the <id> of the type that we're specializing to. |
| auto type_id = inst->GetOperandAs<const uint32_t>(0); |
| auto type_instruction = _.FindDef(type_id); |
| auto type_opcode = type_instruction->opcode(); |
| if (type_opcode != SpvOpTypeInt && type_opcode != SpvOpTypeFloat) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) << "Specialization constant " |
| "must be an integer or " |
| "floating-point number."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Validates that OpSpecConstantTrue and OpSpecConstantFalse specialize to bool. |
| spv_result_t ValidateSpecConstBoolean(ValidationState_t& _, |
| const Instruction* inst) { |
| // Find out the type that we're specializing to. |
| auto type_instruction = _.FindDef(inst->type_id()); |
| if (type_instruction->opcode() != SpvOpTypeBool) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Specialization constant must be a boolean type."; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| // Records the <id> of the forward pointer to be used for validation. |
| spv_result_t ValidateForwardPointer(ValidationState_t& _, |
| const Instruction* inst) { |
| // Record the <id> (which is operand 0) to ensure it's used properly. |
| // OpTypeStruct can only include undefined pointers that are |
| // previously declared as a ForwardPointer |
| return (_.RegisterForwardPointer(inst->GetOperandAs<uint32_t>(0))); |
| } |
| |
| // Validates that any undefined component of the struct is a forward pointer. |
| // It is valid to declare a forward pointer, and use its <id> as one of the |
| // components of a struct. |
| spv_result_t ValidateStruct(ValidationState_t& _, const Instruction* inst) { |
| // Struct components are operands 1, 2, etc. |
| for (unsigned i = 1; i < inst->operands().size(); i++) { |
| auto type_id = inst->GetOperandAs<const uint32_t>(i); |
| auto type_instruction = _.FindDef(type_id); |
| if (type_instruction == nullptr && !_.IsForwardPointer(type_id)) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Forward reference operands in an OpTypeStruct must first be " |
| "declared using OpTypeForwardPointer."; |
| } |
| } |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace |
| |
| // Validates that Data Rules are followed according to the specifications. |
| // (Data Rules subsection of 2.16.1 Universal Validation Rules) |
| spv_result_t DataRulesPass(ValidationState_t& _, const Instruction* inst) { |
| switch (inst->opcode()) { |
| case SpvOpTypeVector: { |
| if (auto error = ValidateVecNumComponents(_, inst)) return error; |
| break; |
| } |
| case SpvOpTypeFloat: { |
| if (auto error = ValidateFloatSize(_, inst)) return error; |
| break; |
| } |
| case SpvOpTypeInt: { |
| if (auto error = ValidateIntSize(_, inst)) return error; |
| break; |
| } |
| case SpvOpTypeMatrix: { |
| if (auto error = ValidateMatrixColumnType(_, inst)) return error; |
| if (auto error = ValidateMatrixNumCols(_, inst)) return error; |
| break; |
| } |
| // TODO(ehsan): Add OpSpecConstantComposite validation code. |
| // TODO(ehsan): Add OpSpecConstantOp validation code (if any). |
| case SpvOpSpecConstant: { |
| if (auto error = ValidateSpecConstNumerical(_, inst)) return error; |
| break; |
| } |
| case SpvOpSpecConstantFalse: |
| case SpvOpSpecConstantTrue: { |
| if (auto error = ValidateSpecConstBoolean(_, inst)) return error; |
| break; |
| } |
| case SpvOpTypeForwardPointer: { |
| if (auto error = ValidateForwardPointer(_, inst)) return error; |
| break; |
| } |
| case SpvOpTypeStruct: { |
| if (auto error = ValidateStruct(_, inst)) return error; |
| break; |
| } |
| // TODO(ehsan): add more data rules validation here. |
| default: { break; } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace val |
| } // namespace spvtools |
