| // Copyright (c) 2017 The Khronos Group Inc. |
| // Copyright (c) 2017 Valve Corporation |
| // Copyright (c) 2017 LunarG Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "source/opt/mem_pass.h" |
| |
| #include <memory> |
| #include <set> |
| #include <vector> |
| |
| #include "OpenCLDebugInfo100.h" |
| #include "source/cfa.h" |
| #include "source/opt/basic_block.h" |
| #include "source/opt/dominator_analysis.h" |
| #include "source/opt/ir_context.h" |
| #include "source/opt/iterator.h" |
| |
| namespace spvtools { |
| namespace opt { |
| |
| namespace { |
| |
| const uint32_t kCopyObjectOperandInIdx = 0; |
| const uint32_t kTypePointerStorageClassInIdx = 0; |
| const uint32_t kTypePointerTypeIdInIdx = 1; |
| |
| } // namespace |
| |
| bool MemPass::IsBaseTargetType(const Instruction* typeInst) const { |
| switch (typeInst->opcode()) { |
| case SpvOpTypeInt: |
| case SpvOpTypeFloat: |
| case SpvOpTypeBool: |
| case SpvOpTypeVector: |
| case SpvOpTypeMatrix: |
| case SpvOpTypeImage: |
| case SpvOpTypeSampler: |
| case SpvOpTypeSampledImage: |
| case SpvOpTypePointer: |
| return true; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| bool MemPass::IsTargetType(const Instruction* typeInst) const { |
| if (IsBaseTargetType(typeInst)) return true; |
| if (typeInst->opcode() == SpvOpTypeArray) { |
| if (!IsTargetType( |
| get_def_use_mgr()->GetDef(typeInst->GetSingleWordOperand(1)))) { |
| return false; |
| } |
| return true; |
| } |
| if (typeInst->opcode() != SpvOpTypeStruct) return false; |
| // All struct members must be math type |
| return typeInst->WhileEachInId([this](const uint32_t* tid) { |
| Instruction* compTypeInst = get_def_use_mgr()->GetDef(*tid); |
| if (!IsTargetType(compTypeInst)) return false; |
| return true; |
| }); |
| } |
| |
| bool MemPass::IsNonPtrAccessChain(const SpvOp opcode) const { |
| return opcode == SpvOpAccessChain || opcode == SpvOpInBoundsAccessChain; |
| } |
| |
| bool MemPass::IsPtr(uint32_t ptrId) { |
| uint32_t varId = ptrId; |
| Instruction* ptrInst = get_def_use_mgr()->GetDef(varId); |
| while (ptrInst->opcode() == SpvOpCopyObject) { |
| varId = ptrInst->GetSingleWordInOperand(kCopyObjectOperandInIdx); |
| ptrInst = get_def_use_mgr()->GetDef(varId); |
| } |
| const SpvOp op = ptrInst->opcode(); |
| if (op == SpvOpVariable || IsNonPtrAccessChain(op)) return true; |
| if (op != SpvOpFunctionParameter) return false; |
| const uint32_t varTypeId = ptrInst->type_id(); |
| const Instruction* varTypeInst = get_def_use_mgr()->GetDef(varTypeId); |
| return varTypeInst->opcode() == SpvOpTypePointer; |
| } |
| |
| Instruction* MemPass::GetPtr(uint32_t ptrId, uint32_t* varId) { |
| *varId = ptrId; |
| Instruction* ptrInst = get_def_use_mgr()->GetDef(*varId); |
| Instruction* varInst; |
| |
| if (ptrInst->opcode() == SpvOpConstantNull) { |
| *varId = 0; |
| return ptrInst; |
| } |
| |
| if (ptrInst->opcode() != SpvOpVariable && |
| ptrInst->opcode() != SpvOpFunctionParameter) { |
| varInst = ptrInst->GetBaseAddress(); |
| } else { |
| varInst = ptrInst; |
| } |
| if (varInst->opcode() == SpvOpVariable) { |
| *varId = varInst->result_id(); |
| } else { |
| *varId = 0; |
| } |
| |
| while (ptrInst->opcode() == SpvOpCopyObject) { |
| uint32_t temp = ptrInst->GetSingleWordInOperand(0); |
| ptrInst = get_def_use_mgr()->GetDef(temp); |
| } |
| |
| return ptrInst; |
| } |
| |
| Instruction* MemPass::GetPtr(Instruction* ip, uint32_t* varId) { |
| assert(ip->opcode() == SpvOpStore || ip->opcode() == SpvOpLoad || |
| ip->opcode() == SpvOpImageTexelPointer || ip->IsAtomicWithLoad()); |
| |
| // All of these opcode place the pointer in position 0. |
| const uint32_t ptrId = ip->GetSingleWordInOperand(0); |
| return GetPtr(ptrId, varId); |
| } |
| |
| bool MemPass::HasOnlyNamesAndDecorates(uint32_t id) const { |
| return get_def_use_mgr()->WhileEachUser(id, [this](Instruction* user) { |
| SpvOp op = user->opcode(); |
| if (op != SpvOpName && !IsNonTypeDecorate(op)) { |
| return false; |
| } |
| return true; |
| }); |
| } |
| |
| void MemPass::KillAllInsts(BasicBlock* bp, bool killLabel) { |
| bp->KillAllInsts(killLabel); |
| } |
| |
| bool MemPass::HasLoads(uint32_t varId) const { |
| return !get_def_use_mgr()->WhileEachUser(varId, [this](Instruction* user) { |
| SpvOp op = user->opcode(); |
| // TODO(): The following is slightly conservative. Could be |
| // better handling of non-store/name. |
| if (IsNonPtrAccessChain(op) || op == SpvOpCopyObject) { |
| if (HasLoads(user->result_id())) { |
| return false; |
| } |
| } else if (op != SpvOpStore && op != SpvOpName && !IsNonTypeDecorate(op)) { |
| return false; |
| } |
| return true; |
| }); |
| } |
| |
| bool MemPass::IsLiveVar(uint32_t varId) const { |
| const Instruction* varInst = get_def_use_mgr()->GetDef(varId); |
| // assume live if not a variable eg. function parameter |
| if (varInst->opcode() != SpvOpVariable) return true; |
| // non-function scope vars are live |
| const uint32_t varTypeId = varInst->type_id(); |
| const Instruction* varTypeInst = get_def_use_mgr()->GetDef(varTypeId); |
| if (varTypeInst->GetSingleWordInOperand(kTypePointerStorageClassInIdx) != |
| SpvStorageClassFunction) |
| return true; |
| // test if variable is loaded from |
| return HasLoads(varId); |
| } |
| |
| void MemPass::AddStores(uint32_t ptr_id, std::queue<Instruction*>* insts) { |
| get_def_use_mgr()->ForEachUser(ptr_id, [this, insts](Instruction* user) { |
| SpvOp op = user->opcode(); |
| if (IsNonPtrAccessChain(op)) { |
| AddStores(user->result_id(), insts); |
| } else if (op == SpvOpStore) { |
| insts->push(user); |
| } |
| }); |
| } |
| |
| void MemPass::DCEInst(Instruction* inst, |
| const std::function<void(Instruction*)>& call_back) { |
| std::queue<Instruction*> deadInsts; |
| deadInsts.push(inst); |
| while (!deadInsts.empty()) { |
| Instruction* di = deadInsts.front(); |
| // Don't delete labels |
| if (di->opcode() == SpvOpLabel) { |
| deadInsts.pop(); |
| continue; |
| } |
| // Remember operands |
| std::set<uint32_t> ids; |
| di->ForEachInId([&ids](uint32_t* iid) { ids.insert(*iid); }); |
| uint32_t varId = 0; |
| // Remember variable if dead load |
| if (di->opcode() == SpvOpLoad) (void)GetPtr(di, &varId); |
| if (call_back) { |
| call_back(di); |
| } |
| context()->KillInst(di); |
| // For all operands with no remaining uses, add their instruction |
| // to the dead instruction queue. |
| for (auto id : ids) |
| if (HasOnlyNamesAndDecorates(id)) { |
| Instruction* odi = get_def_use_mgr()->GetDef(id); |
| if (context()->IsCombinatorInstruction(odi)) deadInsts.push(odi); |
| } |
| // if a load was deleted and it was the variable's |
| // last load, add all its stores to dead queue |
| if (varId != 0 && !IsLiveVar(varId)) AddStores(varId, &deadInsts); |
| deadInsts.pop(); |
| } |
| } |
| |
| MemPass::MemPass() {} |
| |
| bool MemPass::HasOnlySupportedRefs(uint32_t varId) { |
| return get_def_use_mgr()->WhileEachUser(varId, [this](Instruction* user) { |
| auto dbg_op = user->GetOpenCL100DebugOpcode(); |
| if (dbg_op == OpenCLDebugInfo100DebugDeclare || |
| dbg_op == OpenCLDebugInfo100DebugValue) { |
| return true; |
| } |
| SpvOp op = user->opcode(); |
| if (op != SpvOpStore && op != SpvOpLoad && op != SpvOpName && |
| !IsNonTypeDecorate(op)) { |
| return false; |
| } |
| return true; |
| }); |
| } |
| |
| uint32_t MemPass::Type2Undef(uint32_t type_id) { |
| const auto uitr = type2undefs_.find(type_id); |
| if (uitr != type2undefs_.end()) return uitr->second; |
| const uint32_t undefId = TakeNextId(); |
| if (undefId == 0) { |
| return 0; |
| } |
| |
| std::unique_ptr<Instruction> undef_inst( |
| new Instruction(context(), SpvOpUndef, type_id, undefId, {})); |
| get_def_use_mgr()->AnalyzeInstDefUse(&*undef_inst); |
| get_module()->AddGlobalValue(std::move(undef_inst)); |
| type2undefs_[type_id] = undefId; |
| return undefId; |
| } |
| |
| bool MemPass::IsTargetVar(uint32_t varId) { |
| if (varId == 0) { |
| return false; |
| } |
| |
| if (seen_non_target_vars_.find(varId) != seen_non_target_vars_.end()) |
| return false; |
| if (seen_target_vars_.find(varId) != seen_target_vars_.end()) return true; |
| const Instruction* varInst = get_def_use_mgr()->GetDef(varId); |
| if (varInst->opcode() != SpvOpVariable) return false; |
| const uint32_t varTypeId = varInst->type_id(); |
| const Instruction* varTypeInst = get_def_use_mgr()->GetDef(varTypeId); |
| if (varTypeInst->GetSingleWordInOperand(kTypePointerStorageClassInIdx) != |
| SpvStorageClassFunction) { |
| seen_non_target_vars_.insert(varId); |
| return false; |
| } |
| const uint32_t varPteTypeId = |
| varTypeInst->GetSingleWordInOperand(kTypePointerTypeIdInIdx); |
| Instruction* varPteTypeInst = get_def_use_mgr()->GetDef(varPteTypeId); |
| if (!IsTargetType(varPteTypeInst)) { |
| seen_non_target_vars_.insert(varId); |
| return false; |
| } |
| seen_target_vars_.insert(varId); |
| return true; |
| } |
| |
| // Remove all |phi| operands coming from unreachable blocks (i.e., blocks not in |
| // |reachable_blocks|). There are two types of removal that this function can |
| // perform: |
| // |
| // 1- Any operand that comes directly from an unreachable block is completely |
| // removed. Since the block is unreachable, the edge between the unreachable |
| // block and the block holding |phi| has been removed. |
| // |
| // 2- Any operand that comes via a live block and was defined at an unreachable |
| // block gets its value replaced with an OpUndef value. Since the argument |
| // was generated in an unreachable block, it no longer exists, so it cannot |
| // be referenced. However, since the value does not reach |phi| directly |
| // from the unreachable block, the operand cannot be removed from |phi|. |
| // Therefore, we replace the argument value with OpUndef. |
| // |
| // For example, in the switch() below, assume that we want to remove the |
| // argument with value %11 coming from block %41. |
| // |
| // [ ... ] |
| // %41 = OpLabel <--- Unreachable block |
| // %11 = OpLoad %int %y |
| // [ ... ] |
| // OpSelectionMerge %16 None |
| // OpSwitch %12 %16 10 %13 13 %14 18 %15 |
| // %13 = OpLabel |
| // OpBranch %16 |
| // %14 = OpLabel |
| // OpStore %outparm %int_14 |
| // OpBranch %16 |
| // %15 = OpLabel |
| // OpStore %outparm %int_15 |
| // OpBranch %16 |
| // %16 = OpLabel |
| // %30 = OpPhi %int %11 %41 %int_42 %13 %11 %14 %11 %15 |
| // |
| // Since %41 is now an unreachable block, the first operand of |phi| needs to |
| // be removed completely. But the operands (%11 %14) and (%11 %15) cannot be |
| // removed because %14 and %15 are reachable blocks. Since %11 no longer exist, |
| // in those arguments, we replace all references to %11 with an OpUndef value. |
| // This results in |phi| looking like: |
| // |
| // %50 = OpUndef %int |
| // [ ... ] |
| // %30 = OpPhi %int %int_42 %13 %50 %14 %50 %15 |
| void MemPass::RemovePhiOperands( |
| Instruction* phi, const std::unordered_set<BasicBlock*>& reachable_blocks) { |
| std::vector<Operand> keep_operands; |
| uint32_t type_id = 0; |
| // The id of an undefined value we've generated. |
| uint32_t undef_id = 0; |
| |
| // Traverse all the operands in |phi|. Build the new operand vector by adding |
| // all the original operands from |phi| except the unwanted ones. |
| for (uint32_t i = 0; i < phi->NumOperands();) { |
| if (i < 2) { |
| // The first two arguments are always preserved. |
| keep_operands.push_back(phi->GetOperand(i)); |
| ++i; |
| continue; |
| } |
| |
| // The remaining Phi arguments come in pairs. Index 'i' contains the |
| // variable id, index 'i + 1' is the originating block id. |
| assert(i % 2 == 0 && i < phi->NumOperands() - 1 && |
| "malformed Phi arguments"); |
| |
| BasicBlock* in_block = cfg()->block(phi->GetSingleWordOperand(i + 1)); |
| if (reachable_blocks.find(in_block) == reachable_blocks.end()) { |
| // If the incoming block is unreachable, remove both operands as this |
| // means that the |phi| has lost an incoming edge. |
| i += 2; |
| continue; |
| } |
| |
| // In all other cases, the operand must be kept but may need to be changed. |
| uint32_t arg_id = phi->GetSingleWordOperand(i); |
| Instruction* arg_def_instr = get_def_use_mgr()->GetDef(arg_id); |
| BasicBlock* def_block = context()->get_instr_block(arg_def_instr); |
| if (def_block && |
| reachable_blocks.find(def_block) == reachable_blocks.end()) { |
| // If the current |phi| argument was defined in an unreachable block, it |
| // means that this |phi| argument is no longer defined. Replace it with |
| // |undef_id|. |
| if (!undef_id) { |
| type_id = arg_def_instr->type_id(); |
| undef_id = Type2Undef(type_id); |
| } |
| keep_operands.push_back( |
| Operand(spv_operand_type_t::SPV_OPERAND_TYPE_ID, {undef_id})); |
| } else { |
| // Otherwise, the argument comes from a reachable block or from no block |
| // at all (meaning that it was defined in the global section of the |
| // program). In both cases, keep the argument intact. |
| keep_operands.push_back(phi->GetOperand(i)); |
| } |
| |
| keep_operands.push_back(phi->GetOperand(i + 1)); |
| |
| i += 2; |
| } |
| |
| context()->ForgetUses(phi); |
| phi->ReplaceOperands(keep_operands); |
| context()->AnalyzeUses(phi); |
| } |
| |
| void MemPass::RemoveBlock(Function::iterator* bi) { |
| auto& rm_block = **bi; |
| |
| // Remove instructions from the block. |
| rm_block.ForEachInst([&rm_block, this](Instruction* inst) { |
| // Note that we do not kill the block label instruction here. The label |
| // instruction is needed to identify the block, which is needed by the |
| // removal of phi operands. |
| if (inst != rm_block.GetLabelInst()) { |
| context()->KillInst(inst); |
| } |
| }); |
| |
| // Remove the label instruction last. |
| auto label = rm_block.GetLabelInst(); |
| context()->KillInst(label); |
| |
| *bi = bi->Erase(); |
| } |
| |
| bool MemPass::RemoveUnreachableBlocks(Function* func) { |
| bool modified = false; |
| |
| // Mark reachable all blocks reachable from the function's entry block. |
| std::unordered_set<BasicBlock*> reachable_blocks; |
| std::unordered_set<BasicBlock*> visited_blocks; |
| std::queue<BasicBlock*> worklist; |
| reachable_blocks.insert(func->entry().get()); |
| |
| // Initially mark the function entry point as reachable. |
| worklist.push(func->entry().get()); |
| |
| auto mark_reachable = [&reachable_blocks, &visited_blocks, &worklist, |
| this](uint32_t label_id) { |
| auto successor = cfg()->block(label_id); |
| if (visited_blocks.count(successor) == 0) { |
| reachable_blocks.insert(successor); |
| worklist.push(successor); |
| visited_blocks.insert(successor); |
| } |
| }; |
| |
| // Transitively mark all blocks reachable from the entry as reachable. |
| while (!worklist.empty()) { |
| BasicBlock* block = worklist.front(); |
| worklist.pop(); |
| |
| // All the successors of a live block are also live. |
| static_cast<const BasicBlock*>(block)->ForEachSuccessorLabel( |
| mark_reachable); |
| |
| // All the Merge and ContinueTarget blocks of a live block are also live. |
| block->ForMergeAndContinueLabel(mark_reachable); |
| } |
| |
| // Update operands of Phi nodes that reference unreachable blocks. |
| for (auto& block : *func) { |
| // If the block is about to be removed, don't bother updating its |
| // Phi instructions. |
| if (reachable_blocks.count(&block) == 0) { |
| continue; |
| } |
| |
| // If the block is reachable and has Phi instructions, remove all |
| // operands from its Phi instructions that reference unreachable blocks. |
| // If the block has no Phi instructions, this is a no-op. |
| block.ForEachPhiInst([&reachable_blocks, this](Instruction* phi) { |
| RemovePhiOperands(phi, reachable_blocks); |
| }); |
| } |
| |
| // Erase unreachable blocks. |
| for (auto ebi = func->begin(); ebi != func->end();) { |
| if (reachable_blocks.count(&*ebi) == 0) { |
| RemoveBlock(&ebi); |
| modified = true; |
| } else { |
| ++ebi; |
| } |
| } |
| |
| return modified; |
| } |
| |
| bool MemPass::CFGCleanup(Function* func) { |
| bool modified = false; |
| modified |= RemoveUnreachableBlocks(func); |
| return modified; |
| } |
| |
| void MemPass::CollectTargetVars(Function* func) { |
| seen_target_vars_.clear(); |
| seen_non_target_vars_.clear(); |
| type2undefs_.clear(); |
| |
| // Collect target (and non-) variable sets. Remove variables with |
| // non-load/store refs from target variable set |
| for (auto& blk : *func) { |
| for (auto& inst : blk) { |
| switch (inst.opcode()) { |
| case SpvOpStore: |
| case SpvOpLoad: { |
| uint32_t varId; |
| (void)GetPtr(&inst, &varId); |
| if (!IsTargetVar(varId)) break; |
| if (HasOnlySupportedRefs(varId)) break; |
| seen_non_target_vars_.insert(varId); |
| seen_target_vars_.erase(varId); |
| } break; |
| default: |
| break; |
| } |
| } |
| } |
| } |
| |
| } // namespace opt |
| } // namespace spvtools |