| //===- ARMInstrFormats.td - ARM Instruction Formats ----------*- tablegen -*-=// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // |
| // ARM Instruction Format Definitions. |
| // |
| |
| // Format specifies the encoding used by the instruction. This is part of the |
| // ad-hoc solution used to emit machine instruction encodings by our machine |
| // code emitter. |
| class Format<bits<6> val> { |
| bits<6> Value = val; |
| } |
| |
| def Pseudo : Format<0>; |
| def MulFrm : Format<1>; |
| def BrFrm : Format<2>; |
| def BrMiscFrm : Format<3>; |
| |
| def DPFrm : Format<4>; |
| def DPSoRegRegFrm : Format<5>; |
| |
| def LdFrm : Format<6>; |
| def StFrm : Format<7>; |
| def LdMiscFrm : Format<8>; |
| def StMiscFrm : Format<9>; |
| def LdStMulFrm : Format<10>; |
| |
| def LdStExFrm : Format<11>; |
| |
| def ArithMiscFrm : Format<12>; |
| def SatFrm : Format<13>; |
| def ExtFrm : Format<14>; |
| |
| def VFPUnaryFrm : Format<15>; |
| def VFPBinaryFrm : Format<16>; |
| def VFPConv1Frm : Format<17>; |
| def VFPConv2Frm : Format<18>; |
| def VFPConv3Frm : Format<19>; |
| def VFPConv4Frm : Format<20>; |
| def VFPConv5Frm : Format<21>; |
| def VFPLdStFrm : Format<22>; |
| def VFPLdStMulFrm : Format<23>; |
| def VFPMiscFrm : Format<24>; |
| |
| def ThumbFrm : Format<25>; |
| def MiscFrm : Format<26>; |
| |
| def NGetLnFrm : Format<27>; |
| def NSetLnFrm : Format<28>; |
| def NDupFrm : Format<29>; |
| def NLdStFrm : Format<30>; |
| def N1RegModImmFrm: Format<31>; |
| def N2RegFrm : Format<32>; |
| def NVCVTFrm : Format<33>; |
| def NVDupLnFrm : Format<34>; |
| def N2RegVShLFrm : Format<35>; |
| def N2RegVShRFrm : Format<36>; |
| def N3RegFrm : Format<37>; |
| def N3RegVShFrm : Format<38>; |
| def NVExtFrm : Format<39>; |
| def NVMulSLFrm : Format<40>; |
| def NVTBLFrm : Format<41>; |
| def DPSoRegImmFrm : Format<42>; |
| |
| // Misc flags. |
| |
| // The instruction has an Rn register operand. |
| // UnaryDP - Indicates this is a unary data processing instruction, i.e. |
| // it doesn't have a Rn operand. |
| class UnaryDP { bit isUnaryDataProc = 1; } |
| |
| // Xform16Bit - Indicates this Thumb2 instruction may be transformed into |
| // a 16-bit Thumb instruction if certain conditions are met. |
| class Xform16Bit { bit canXformTo16Bit = 1; } |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Instruction flags. These need to match ARMBaseInstrInfo.h. |
| // |
| |
| // FIXME: Once the JIT is MC-ized, these can go away. |
| // Addressing mode. |
| class AddrMode<bits<5> val> { |
| bits<5> Value = val; |
| } |
| def AddrModeNone : AddrMode<0>; |
| def AddrMode1 : AddrMode<1>; |
| def AddrMode2 : AddrMode<2>; |
| def AddrMode3 : AddrMode<3>; |
| def AddrMode4 : AddrMode<4>; |
| def AddrMode5 : AddrMode<5>; |
| def AddrMode6 : AddrMode<6>; |
| def AddrModeT1_1 : AddrMode<7>; |
| def AddrModeT1_2 : AddrMode<8>; |
| def AddrModeT1_4 : AddrMode<9>; |
| def AddrModeT1_s : AddrMode<10>; |
| def AddrModeT2_i12 : AddrMode<11>; |
| def AddrModeT2_i8 : AddrMode<12>; |
| def AddrModeT2_so : AddrMode<13>; |
| def AddrModeT2_pc : AddrMode<14>; |
| def AddrModeT2_i8s4 : AddrMode<15>; |
| def AddrMode_i12 : AddrMode<16>; |
| |
| // Load / store index mode. |
| class IndexMode<bits<2> val> { |
| bits<2> Value = val; |
| } |
| def IndexModeNone : IndexMode<0>; |
| def IndexModePre : IndexMode<1>; |
| def IndexModePost : IndexMode<2>; |
| def IndexModeUpd : IndexMode<3>; |
| |
| // Instruction execution domain. |
| class Domain<bits<3> val> { |
| bits<3> Value = val; |
| } |
| def GenericDomain : Domain<0>; |
| def VFPDomain : Domain<1>; // Instructions in VFP domain only |
| def NeonDomain : Domain<2>; // Instructions in Neon domain only |
| def VFPNeonDomain : Domain<3>; // Instructions in both VFP & Neon domains |
| def VFPNeonA8Domain : Domain<5>; // Instructions in VFP & Neon under A8 |
| |
| //===----------------------------------------------------------------------===// |
| // ARM special operands. |
| // |
| |
| // ARM imod and iflag operands, used only by the CPS instruction. |
| def imod_op : Operand<i32> { |
| let PrintMethod = "printCPSIMod"; |
| } |
| |
| def ProcIFlagsOperand : AsmOperandClass { |
| let Name = "ProcIFlags"; |
| let ParserMethod = "parseProcIFlagsOperand"; |
| } |
| def iflags_op : Operand<i32> { |
| let PrintMethod = "printCPSIFlag"; |
| let ParserMatchClass = ProcIFlagsOperand; |
| } |
| |
| // ARM Predicate operand. Default to 14 = always (AL). Second part is CC |
| // register whose default is 0 (no register). |
| def CondCodeOperand : AsmOperandClass { let Name = "CondCode"; } |
| def pred : PredicateOperand<OtherVT, (ops i32imm, i32imm), |
| (ops (i32 14), (i32 zero_reg))> { |
| let PrintMethod = "printPredicateOperand"; |
| let ParserMatchClass = CondCodeOperand; |
| let DecoderMethod = "DecodePredicateOperand"; |
| } |
| |
| // Conditional code result for instructions whose 's' bit is set, e.g. subs. |
| def CCOutOperand : AsmOperandClass { let Name = "CCOut"; } |
| def cc_out : OptionalDefOperand<OtherVT, (ops CCR), (ops (i32 zero_reg))> { |
| let EncoderMethod = "getCCOutOpValue"; |
| let PrintMethod = "printSBitModifierOperand"; |
| let ParserMatchClass = CCOutOperand; |
| let DecoderMethod = "DecodeCCOutOperand"; |
| } |
| |
| // Same as cc_out except it defaults to setting CPSR. |
| def s_cc_out : OptionalDefOperand<OtherVT, (ops CCR), (ops (i32 CPSR))> { |
| let EncoderMethod = "getCCOutOpValue"; |
| let PrintMethod = "printSBitModifierOperand"; |
| let ParserMatchClass = CCOutOperand; |
| let DecoderMethod = "DecodeCCOutOperand"; |
| } |
| |
| // ARM special operands for disassembly only. |
| // |
| def SetEndAsmOperand : AsmOperandClass { |
| let Name = "SetEndImm"; |
| let ParserMethod = "parseSetEndImm"; |
| } |
| def setend_op : Operand<i32> { |
| let PrintMethod = "printSetendOperand"; |
| let ParserMatchClass = SetEndAsmOperand; |
| } |
| |
| def MSRMaskOperand : AsmOperandClass { |
| let Name = "MSRMask"; |
| let ParserMethod = "parseMSRMaskOperand"; |
| } |
| def msr_mask : Operand<i32> { |
| let PrintMethod = "printMSRMaskOperand"; |
| let DecoderMethod = "DecodeMSRMask"; |
| let ParserMatchClass = MSRMaskOperand; |
| } |
| |
| // Shift Right Immediate - A shift right immediate is encoded differently from |
| // other shift immediates. The imm6 field is encoded like so: |
| // |
| // Offset Encoding |
| // 8 imm6<5:3> = '001', 8 - <imm> is encoded in imm6<2:0> |
| // 16 imm6<5:4> = '01', 16 - <imm> is encoded in imm6<3:0> |
| // 32 imm6<5> = '1', 32 - <imm> is encoded in imm6<4:0> |
| // 64 64 - <imm> is encoded in imm6<5:0> |
| def shr_imm8 : Operand<i32> { |
| let EncoderMethod = "getShiftRight8Imm"; |
| let DecoderMethod = "DecodeShiftRight8Imm"; |
| } |
| def shr_imm16 : Operand<i32> { |
| let EncoderMethod = "getShiftRight16Imm"; |
| let DecoderMethod = "DecodeShiftRight16Imm"; |
| } |
| def shr_imm32 : Operand<i32> { |
| let EncoderMethod = "getShiftRight32Imm"; |
| let DecoderMethod = "DecodeShiftRight32Imm"; |
| } |
| def shr_imm64 : Operand<i32> { |
| let EncoderMethod = "getShiftRight64Imm"; |
| let DecoderMethod = "DecodeShiftRight64Imm"; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Assembler alias templates. |
| // |
| class ARMInstAlias<string Asm, dag Result, bit Emit = 0b1> |
| : InstAlias<Asm, Result, Emit>, Requires<[IsARM]>; |
| class tInstAlias<string Asm, dag Result, bit Emit = 0b1> |
| : InstAlias<Asm, Result, Emit>, Requires<[IsThumb]>; |
| class t2InstAlias<string Asm, dag Result, bit Emit = 0b1> |
| : InstAlias<Asm, Result, Emit>, Requires<[IsThumb2]>; |
| class VFP2InstAlias<string Asm, dag Result, bit Emit = 0b1> |
| : InstAlias<Asm, Result, Emit>, Requires<[HasVFP2]>; |
| class VFP3InstAlias<string Asm, dag Result, bit Emit = 0b1> |
| : InstAlias<Asm, Result, Emit>, Requires<[HasVFP3]>; |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Instruction templates. |
| // |
| |
| |
| class InstTemplate<AddrMode am, int sz, IndexMode im, |
| Format f, Domain d, string cstr, InstrItinClass itin> |
| : Instruction { |
| let Namespace = "ARM"; |
| |
| AddrMode AM = am; |
| int Size = sz; |
| IndexMode IM = im; |
| bits<2> IndexModeBits = IM.Value; |
| Format F = f; |
| bits<6> Form = F.Value; |
| Domain D = d; |
| bit isUnaryDataProc = 0; |
| bit canXformTo16Bit = 0; |
| // The instruction is a 16-bit flag setting Thumb instruction. Used |
| // by the parser to determine whether to require the 'S' suffix on the |
| // mnemonic (when not in an IT block) or preclude it (when in an IT block). |
| bit thumbArithFlagSetting = 0; |
| |
| // If this is a pseudo instruction, mark it isCodeGenOnly. |
| let isCodeGenOnly = !eq(!cast<string>(f), "Pseudo"); |
| |
| // The layout of TSFlags should be kept in sync with ARMBaseInfo.h. |
| let TSFlags{4-0} = AM.Value; |
| let TSFlags{6-5} = IndexModeBits; |
| let TSFlags{12-7} = Form; |
| let TSFlags{13} = isUnaryDataProc; |
| let TSFlags{14} = canXformTo16Bit; |
| let TSFlags{17-15} = D.Value; |
| let TSFlags{18} = thumbArithFlagSetting; |
| |
| let Constraints = cstr; |
| let Itinerary = itin; |
| } |
| |
| class Encoding { |
| field bits<32> Inst; |
| } |
| |
| class InstARM<AddrMode am, int sz, IndexMode im, |
| Format f, Domain d, string cstr, InstrItinClass itin> |
| : InstTemplate<am, sz, im, f, d, cstr, itin>, Encoding { |
| let DecoderNamespace = "ARM"; |
| } |
| |
| // This Encoding-less class is used by Thumb1 to specify the encoding bits later |
| // on by adding flavors to specific instructions. |
| class InstThumb<AddrMode am, int sz, IndexMode im, |
| Format f, Domain d, string cstr, InstrItinClass itin> |
| : InstTemplate<am, sz, im, f, d, cstr, itin> { |
| let DecoderNamespace = "Thumb"; |
| } |
| |
| class PseudoInst<dag oops, dag iops, InstrItinClass itin, list<dag> pattern> |
| : InstTemplate<AddrModeNone, 0, IndexModeNone, Pseudo, |
| GenericDomain, "", itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let Pattern = pattern; |
| let isCodeGenOnly = 1; |
| let isPseudo = 1; |
| } |
| |
| // PseudoInst that's ARM-mode only. |
| class ARMPseudoInst<dag oops, dag iops, int sz, InstrItinClass itin, |
| list<dag> pattern> |
| : PseudoInst<oops, iops, itin, pattern> { |
| let Size = sz; |
| list<Predicate> Predicates = [IsARM]; |
| } |
| |
| // PseudoInst that's Thumb-mode only. |
| class tPseudoInst<dag oops, dag iops, int sz, InstrItinClass itin, |
| list<dag> pattern> |
| : PseudoInst<oops, iops, itin, pattern> { |
| let Size = sz; |
| list<Predicate> Predicates = [IsThumb]; |
| } |
| |
| // PseudoInst that's Thumb2-mode only. |
| class t2PseudoInst<dag oops, dag iops, int sz, InstrItinClass itin, |
| list<dag> pattern> |
| : PseudoInst<oops, iops, itin, pattern> { |
| let Size = sz; |
| list<Predicate> Predicates = [IsThumb2]; |
| } |
| |
| class ARMPseudoExpand<dag oops, dag iops, int sz, |
| InstrItinClass itin, list<dag> pattern, |
| dag Result> |
| : ARMPseudoInst<oops, iops, sz, itin, pattern>, |
| PseudoInstExpansion<Result>; |
| |
| class tPseudoExpand<dag oops, dag iops, int sz, |
| InstrItinClass itin, list<dag> pattern, |
| dag Result> |
| : tPseudoInst<oops, iops, sz, itin, pattern>, |
| PseudoInstExpansion<Result>; |
| |
| class t2PseudoExpand<dag oops, dag iops, int sz, |
| InstrItinClass itin, list<dag> pattern, |
| dag Result> |
| : t2PseudoInst<oops, iops, sz, itin, pattern>, |
| PseudoInstExpansion<Result>; |
| |
| // Almost all ARM instructions are predicable. |
| class I<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, |
| list<dag> pattern> |
| : InstARM<am, sz, im, f, GenericDomain, cstr, itin> { |
| bits<4> p; |
| let Inst{31-28} = p; |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsARM]; |
| } |
| |
| // A few are not predicable |
| class InoP<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, |
| list<dag> pattern> |
| : InstARM<am, sz, im, f, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = !strconcat(opc, asm); |
| let Pattern = pattern; |
| let isPredicable = 0; |
| list<Predicate> Predicates = [IsARM]; |
| } |
| |
| // Same as I except it can optionally modify CPSR. Note it's modeled as an input |
| // operand since by default it's a zero register. It will become an implicit def |
| // once it's "flipped". |
| class sI<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, |
| list<dag> pattern> |
| : InstARM<am, sz, im, f, GenericDomain, cstr, itin> { |
| bits<4> p; // Predicate operand |
| bits<1> s; // condition-code set flag ('1' if the insn should set the flags) |
| let Inst{31-28} = p; |
| let Inst{20} = s; |
| |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p, cc_out:$s)); |
| let AsmString = !strconcat(opc, "${s}${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsARM]; |
| } |
| |
| // Special cases |
| class XI<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, im, f, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsARM]; |
| } |
| |
| class AI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern>; |
| class AsI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : sI<oops, iops, AddrModeNone, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern>; |
| class AXI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : XI<oops, iops, AddrModeNone, 4, IndexModeNone, f, itin, |
| asm, "", pattern>; |
| class AInoP<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : InoP<oops, iops, AddrModeNone, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern>; |
| |
| // Ctrl flow instructions |
| class ABI<bits<4> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, BrFrm, itin, |
| opc, asm, "", pattern> { |
| let Inst{27-24} = opcod; |
| } |
| class ABXI<bits<4> opcod, dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : XI<oops, iops, AddrModeNone, 4, IndexModeNone, BrFrm, itin, |
| asm, "", pattern> { |
| let Inst{27-24} = opcod; |
| } |
| |
| // BR_JT instructions |
| class JTI<dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : XI<oops, iops, AddrModeNone, 0, IndexModeNone, BrMiscFrm, itin, |
| asm, "", pattern>; |
| |
| // Atomic load/store instructions |
| class AIldrex<bits<2> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, LdStExFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rt; |
| bits<4> addr; |
| let Inst{27-23} = 0b00011; |
| let Inst{22-21} = opcod; |
| let Inst{20} = 1; |
| let Inst{19-16} = addr; |
| let Inst{15-12} = Rt; |
| let Inst{11-0} = 0b111110011111; |
| } |
| class AIstrex<bits<2> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, LdStExFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rd; |
| bits<4> Rt; |
| bits<4> addr; |
| let Inst{27-23} = 0b00011; |
| let Inst{22-21} = opcod; |
| let Inst{20} = 0; |
| let Inst{19-16} = addr; |
| let Inst{15-12} = Rd; |
| let Inst{11-4} = 0b11111001; |
| let Inst{3-0} = Rt; |
| } |
| class AIswp<bit b, dag oops, dag iops, string opc, list<dag> pattern> |
| : AI<oops, iops, MiscFrm, NoItinerary, opc, "\t$Rt, $Rt2, $addr", pattern> { |
| bits<4> Rt; |
| bits<4> Rt2; |
| bits<4> addr; |
| let Inst{27-23} = 0b00010; |
| let Inst{22} = b; |
| let Inst{21-20} = 0b00; |
| let Inst{19-16} = addr; |
| let Inst{15-12} = Rt; |
| let Inst{11-4} = 0b00001001; |
| let Inst{3-0} = Rt2; |
| } |
| |
| // addrmode1 instructions |
| class AI1<bits<4> opcod, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrMode1, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern> { |
| let Inst{24-21} = opcod; |
| let Inst{27-26} = 0b00; |
| } |
| class AsI1<bits<4> opcod, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : sI<oops, iops, AddrMode1, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern> { |
| let Inst{24-21} = opcod; |
| let Inst{27-26} = 0b00; |
| } |
| class AXI1<bits<4> opcod, dag oops, dag iops, Format f, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : XI<oops, iops, AddrMode1, 4, IndexModeNone, f, itin, |
| asm, "", pattern> { |
| let Inst{24-21} = opcod; |
| let Inst{27-26} = 0b00; |
| } |
| |
| // loads |
| |
| // LDR/LDRB/STR/STRB/... |
| class AI2ldst<bits<3> op, bit isLd, bit isByte, dag oops, dag iops, AddrMode am, |
| Format f, InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : I<oops, iops, am, 4, IndexModeNone, f, itin, opc, asm, |
| "", pattern> { |
| let Inst{27-25} = op; |
| let Inst{24} = 1; // 24 == P |
| // 23 == U |
| let Inst{22} = isByte; |
| let Inst{21} = 0; // 21 == W |
| let Inst{20} = isLd; |
| } |
| // Indexed load/stores |
| class AI2ldstidx<bit isLd, bit isByte, bit isPre, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : I<oops, iops, AddrMode2, 4, im, f, itin, |
| opc, asm, cstr, pattern> { |
| bits<4> Rt; |
| let Inst{27-26} = 0b01; |
| let Inst{24} = isPre; // P bit |
| let Inst{22} = isByte; // B bit |
| let Inst{21} = isPre; // W bit |
| let Inst{20} = isLd; // L bit |
| let Inst{15-12} = Rt; |
| } |
| class AI2stridx_reg<bit isByte, bit isPre, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : AI2ldstidx<0, isByte, isPre, oops, iops, im, f, itin, opc, asm, cstr, |
| pattern> { |
| // AM2 store w/ two operands: (GPR, am2offset) |
| // {12} isAdd |
| // {11-0} imm12/Rm |
| bits<14> offset; |
| bits<4> Rn; |
| let Inst{25} = 1; |
| let Inst{23} = offset{12}; |
| let Inst{19-16} = Rn; |
| let Inst{11-5} = offset{11-5}; |
| let Inst{4} = 0; |
| let Inst{3-0} = offset{3-0}; |
| } |
| |
| class AI2stridx_imm<bit isByte, bit isPre, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : AI2ldstidx<0, isByte, isPre, oops, iops, im, f, itin, opc, asm, cstr, |
| pattern> { |
| // AM2 store w/ two operands: (GPR, am2offset) |
| // {12} isAdd |
| // {11-0} imm12/Rm |
| bits<14> offset; |
| bits<4> Rn; |
| let Inst{25} = 0; |
| let Inst{23} = offset{12}; |
| let Inst{19-16} = Rn; |
| let Inst{11-0} = offset{11-0}; |
| } |
| |
| |
| // FIXME: Merge with the above class when addrmode2 gets used for STR, STRB |
| // but for now use this class for STRT and STRBT. |
| class AI2stridxT<bit isByte, bit isPre, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : AI2ldstidx<0, isByte, isPre, oops, iops, im, f, itin, opc, asm, cstr, |
| pattern> { |
| // AM2 store w/ two operands: (GPR, am2offset) |
| // {17-14} Rn |
| // {13} 1 == Rm, 0 == imm12 |
| // {12} isAdd |
| // {11-0} imm12/Rm |
| bits<18> addr; |
| let Inst{25} = addr{13}; |
| let Inst{23} = addr{12}; |
| let Inst{19-16} = addr{17-14}; |
| let Inst{11-0} = addr{11-0}; |
| } |
| |
| // addrmode3 instructions |
| class AI3ld<bits<4> op, bit op20, dag oops, dag iops, Format f, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrMode3, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern> { |
| bits<14> addr; |
| bits<4> Rt; |
| let Inst{27-25} = 0b000; |
| let Inst{24} = 1; // P bit |
| let Inst{23} = addr{8}; // U bit |
| let Inst{22} = addr{13}; // 1 == imm8, 0 == Rm |
| let Inst{21} = 0; // W bit |
| let Inst{20} = op20; // L bit |
| let Inst{19-16} = addr{12-9}; // Rn |
| let Inst{15-12} = Rt; // Rt |
| let Inst{11-8} = addr{7-4}; // imm7_4/zero |
| let Inst{7-4} = op; |
| let Inst{3-0} = addr{3-0}; // imm3_0/Rm |
| |
| let DecoderMethod = "DecodeAddrMode3Instruction"; |
| } |
| |
| class AI3ldstidx<bits<4> op, bit op20, bit isPre, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : I<oops, iops, AddrMode3, 4, im, f, itin, |
| opc, asm, cstr, pattern> { |
| bits<4> Rt; |
| let Inst{27-25} = 0b000; |
| let Inst{24} = isPre; // P bit |
| let Inst{21} = isPre; // W bit |
| let Inst{20} = op20; // L bit |
| let Inst{15-12} = Rt; // Rt |
| let Inst{7-4} = op; |
| } |
| |
| // FIXME: Merge with the above class when addrmode2 gets used for LDR, LDRB |
| // but for now use this class for LDRSBT, LDRHT, LDSHT. |
| class AI3ldstidxT<bits<4> op, bit isLoad, dag oops, dag iops, |
| IndexMode im, Format f, InstrItinClass itin, string opc, |
| string asm, string cstr, list<dag> pattern> |
| : I<oops, iops, AddrMode3, 4, im, f, itin, opc, asm, cstr, pattern> { |
| // {13} 1 == imm8, 0 == Rm |
| // {12-9} Rn |
| // {8} isAdd |
| // {7-4} imm7_4/zero |
| // {3-0} imm3_0/Rm |
| bits<4> addr; |
| bits<4> Rt; |
| let Inst{27-25} = 0b000; |
| let Inst{24} = 0; // P bit |
| let Inst{21} = 1; |
| let Inst{20} = isLoad; // L bit |
| let Inst{19-16} = addr; // Rn |
| let Inst{15-12} = Rt; // Rt |
| let Inst{7-4} = op; |
| } |
| |
| // stores |
| class AI3str<bits<4> op, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrMode3, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern> { |
| bits<14> addr; |
| bits<4> Rt; |
| let Inst{27-25} = 0b000; |
| let Inst{24} = 1; // P bit |
| let Inst{23} = addr{8}; // U bit |
| let Inst{22} = addr{13}; // 1 == imm8, 0 == Rm |
| let Inst{21} = 0; // W bit |
| let Inst{20} = 0; // L bit |
| let Inst{19-16} = addr{12-9}; // Rn |
| let Inst{15-12} = Rt; // Rt |
| let Inst{11-8} = addr{7-4}; // imm7_4/zero |
| let Inst{7-4} = op; |
| let Inst{3-0} = addr{3-0}; // imm3_0/Rm |
| let DecoderMethod = "DecodeAddrMode3Instruction"; |
| } |
| |
| // addrmode4 instructions |
| class AXI4<dag oops, dag iops, IndexMode im, Format f, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : XI<oops, iops, AddrMode4, 4, im, f, itin, asm, cstr, pattern> { |
| bits<4> p; |
| bits<16> regs; |
| bits<4> Rn; |
| let Inst{31-28} = p; |
| let Inst{27-25} = 0b100; |
| let Inst{22} = 0; // S bit |
| let Inst{19-16} = Rn; |
| let Inst{15-0} = regs; |
| } |
| |
| // Unsigned multiply, multiply-accumulate instructions. |
| class AMul1I<bits<7> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, MulFrm, itin, |
| opc, asm, "", pattern> { |
| let Inst{7-4} = 0b1001; |
| let Inst{20} = 0; // S bit |
| let Inst{27-21} = opcod; |
| } |
| class AsMul1I<bits<7> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : sI<oops, iops, AddrModeNone, 4, IndexModeNone, MulFrm, itin, |
| opc, asm, "", pattern> { |
| let Inst{7-4} = 0b1001; |
| let Inst{27-21} = opcod; |
| } |
| |
| // Most significant word multiply |
| class AMul2I<bits<7> opcod, bits<4> opc7_4, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, MulFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rd; |
| bits<4> Rn; |
| bits<4> Rm; |
| let Inst{7-4} = opc7_4; |
| let Inst{20} = 1; |
| let Inst{27-21} = opcod; |
| let Inst{19-16} = Rd; |
| let Inst{11-8} = Rm; |
| let Inst{3-0} = Rn; |
| } |
| // MSW multiple w/ Ra operand |
| class AMul2Ia<bits<7> opcod, bits<4> opc7_4, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AMul2I<opcod, opc7_4, oops, iops, itin, opc, asm, pattern> { |
| bits<4> Ra; |
| let Inst{15-12} = Ra; |
| } |
| |
| // SMUL<x><y> / SMULW<y> / SMLA<x><y> / SMLAW<x><y> |
| class AMulxyIbase<bits<7> opcod, bits<2> bit6_5, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, MulFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rn; |
| bits<4> Rm; |
| let Inst{4} = 0; |
| let Inst{7} = 1; |
| let Inst{20} = 0; |
| let Inst{27-21} = opcod; |
| let Inst{6-5} = bit6_5; |
| let Inst{11-8} = Rm; |
| let Inst{3-0} = Rn; |
| } |
| class AMulxyI<bits<7> opcod, bits<2> bit6_5, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AMulxyIbase<opcod, bit6_5, oops, iops, itin, opc, asm, pattern> { |
| bits<4> Rd; |
| let Inst{19-16} = Rd; |
| } |
| |
| // AMulxyI with Ra operand |
| class AMulxyIa<bits<7> opcod, bits<2> bit6_5, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AMulxyI<opcod, bit6_5, oops, iops, itin, opc, asm, pattern> { |
| bits<4> Ra; |
| let Inst{15-12} = Ra; |
| } |
| // SMLAL* |
| class AMulxyI64<bits<7> opcod, bits<2> bit6_5, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AMulxyIbase<opcod, bit6_5, oops, iops, itin, opc, asm, pattern> { |
| bits<4> RdLo; |
| bits<4> RdHi; |
| let Inst{19-16} = RdHi; |
| let Inst{15-12} = RdLo; |
| } |
| |
| // Extend instructions. |
| class AExtI<bits<8> opcod, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, ExtFrm, itin, |
| opc, asm, "", pattern> { |
| // All AExtI instructions have Rd and Rm register operands. |
| bits<4> Rd; |
| bits<4> Rm; |
| let Inst{15-12} = Rd; |
| let Inst{3-0} = Rm; |
| let Inst{7-4} = 0b0111; |
| let Inst{9-8} = 0b00; |
| let Inst{27-20} = opcod; |
| } |
| |
| // Misc Arithmetic instructions. |
| class AMiscA1I<bits<8> opcod, bits<4> opc7_4, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, ArithMiscFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rd; |
| bits<4> Rm; |
| let Inst{27-20} = opcod; |
| let Inst{19-16} = 0b1111; |
| let Inst{15-12} = Rd; |
| let Inst{11-8} = 0b1111; |
| let Inst{7-4} = opc7_4; |
| let Inst{3-0} = Rm; |
| } |
| |
| // PKH instructions |
| def PKHLSLAsmOperand : AsmOperandClass { |
| let Name = "PKHLSLImm"; |
| let ParserMethod = "parsePKHLSLImm"; |
| } |
| def pkh_lsl_amt: Operand<i32>, ImmLeaf<i32, [{ return Imm >= 0 && Imm < 32; }]>{ |
| let PrintMethod = "printPKHLSLShiftImm"; |
| let ParserMatchClass = PKHLSLAsmOperand; |
| } |
| def PKHASRAsmOperand : AsmOperandClass { |
| let Name = "PKHASRImm"; |
| let ParserMethod = "parsePKHASRImm"; |
| } |
| def pkh_asr_amt: Operand<i32>, ImmLeaf<i32, [{ return Imm > 0 && Imm <= 32; }]>{ |
| let PrintMethod = "printPKHASRShiftImm"; |
| let ParserMatchClass = PKHASRAsmOperand; |
| } |
| |
| class APKHI<bits<8> opcod, bit tb, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : I<oops, iops, AddrModeNone, 4, IndexModeNone, ArithMiscFrm, itin, |
| opc, asm, "", pattern> { |
| bits<4> Rd; |
| bits<4> Rn; |
| bits<4> Rm; |
| bits<5> sh; |
| let Inst{27-20} = opcod; |
| let Inst{19-16} = Rn; |
| let Inst{15-12} = Rd; |
| let Inst{11-7} = sh; |
| let Inst{6} = tb; |
| let Inst{5-4} = 0b01; |
| let Inst{3-0} = Rm; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| |
| // ARMPat - Same as Pat<>, but requires that the compiler be in ARM mode. |
| class ARMPat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsARM]; |
| } |
| class ARMV5TPat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsARM, HasV5T]; |
| } |
| class ARMV5TEPat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsARM, HasV5TE]; |
| } |
| class ARMV6Pat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsARM, HasV6]; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Thumb Instruction Format Definitions. |
| // |
| |
| class ThumbI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, string asm, string cstr, list<dag> pattern> |
| : InstThumb<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb]; |
| } |
| |
| // TI - Thumb instruction. |
| class TI<dag oops, dag iops, InstrItinClass itin, string asm, list<dag> pattern> |
| : ThumbI<oops, iops, AddrModeNone, 2, itin, asm, "", pattern>; |
| |
| // Two-address instructions |
| class TIt<dag oops, dag iops, InstrItinClass itin, string asm, |
| list<dag> pattern> |
| : ThumbI<oops, iops, AddrModeNone, 2, itin, asm, "$lhs = $dst", |
| pattern>; |
| |
| // tBL, tBX 32-bit instructions |
| class TIx2<bits<5> opcod1, bits<2> opcod2, bit opcod3, |
| dag oops, dag iops, InstrItinClass itin, string asm, |
| list<dag> pattern> |
| : ThumbI<oops, iops, AddrModeNone, 4, itin, asm, "", pattern>, |
| Encoding { |
| let Inst{31-27} = opcod1; |
| let Inst{15-14} = opcod2; |
| let Inst{12} = opcod3; |
| } |
| |
| // BR_JT instructions |
| class TJTI<dag oops, dag iops, InstrItinClass itin, string asm, |
| list<dag> pattern> |
| : ThumbI<oops, iops, AddrModeNone, 0, itin, asm, "", pattern>; |
| |
| // Thumb1 only |
| class Thumb1I<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, string asm, string cstr, list<dag> pattern> |
| : InstThumb<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; |
| } |
| |
| class T1I<dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : Thumb1I<oops, iops, AddrModeNone, 2, itin, asm, "", pattern>; |
| class T1Ix2<dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : Thumb1I<oops, iops, AddrModeNone, 4, itin, asm, "", pattern>; |
| |
| // Two-address instructions |
| class T1It<dag oops, dag iops, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : Thumb1I<oops, iops, AddrModeNone, 2, itin, |
| asm, cstr, pattern>; |
| |
| // Thumb1 instruction that can either be predicated or set CPSR. |
| class Thumb1sI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstThumb<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = !con(oops, (outs s_cc_out:$s)); |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${s}${p}", asm); |
| let Pattern = pattern; |
| let thumbArithFlagSetting = 1; |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; |
| let DecoderNamespace = "ThumbSBit"; |
| } |
| |
| class T1sI<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb1sI<oops, iops, AddrModeNone, 2, itin, opc, asm, "", pattern>; |
| |
| // Two-address instructions |
| class T1sIt<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb1sI<oops, iops, AddrModeNone, 2, itin, opc, asm, |
| "$Rn = $Rdn", pattern>; |
| |
| // Thumb1 instruction that can be predicated. |
| class Thumb1pI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstThumb<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; |
| } |
| |
| class T1pI<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb1pI<oops, iops, AddrModeNone, 2, itin, opc, asm, "", pattern>; |
| |
| // Two-address instructions |
| class T1pIt<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb1pI<oops, iops, AddrModeNone, 2, itin, opc, asm, |
| "$Rn = $Rdn", pattern>; |
| |
| class T1pIs<dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : Thumb1pI<oops, iops, AddrModeT1_s, 2, itin, opc, asm, "", pattern>; |
| |
| class Encoding16 : Encoding { |
| let Inst{31-16} = 0x0000; |
| } |
| |
| // A6.2 16-bit Thumb instruction encoding |
| class T1Encoding<bits<6> opcode> : Encoding16 { |
| let Inst{15-10} = opcode; |
| } |
| |
| // A6.2.1 Shift (immediate), add, subtract, move, and compare encoding. |
| class T1General<bits<5> opcode> : Encoding16 { |
| let Inst{15-14} = 0b00; |
| let Inst{13-9} = opcode; |
| } |
| |
| // A6.2.2 Data-processing encoding. |
| class T1DataProcessing<bits<4> opcode> : Encoding16 { |
| let Inst{15-10} = 0b010000; |
| let Inst{9-6} = opcode; |
| } |
| |
| // A6.2.3 Special data instructions and branch and exchange encoding. |
| class T1Special<bits<4> opcode> : Encoding16 { |
| let Inst{15-10} = 0b010001; |
| let Inst{9-6} = opcode; |
| } |
| |
| // A6.2.4 Load/store single data item encoding. |
| class T1LoadStore<bits<4> opA, bits<3> opB> : Encoding16 { |
| let Inst{15-12} = opA; |
| let Inst{11-9} = opB; |
| } |
| class T1LdStSP<bits<3> opB> : T1LoadStore<0b1001, opB>; // SP relative |
| |
| class T1BranchCond<bits<4> opcode> : Encoding16 { |
| let Inst{15-12} = opcode; |
| } |
| |
| // Helper classes to encode Thumb1 loads and stores. For immediates, the |
| // following bits are used for "opA" (see A6.2.4): |
| // |
| // 0b0110 => Immediate, 4 bytes |
| // 0b1000 => Immediate, 2 bytes |
| // 0b0111 => Immediate, 1 byte |
| class T1pILdStEncode<bits<3> opcode, dag oops, dag iops, AddrMode am, |
| InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : Thumb1pI<oops, iops, am, 2, itin, opc, asm, "", pattern>, |
| T1LoadStore<0b0101, opcode> { |
| bits<3> Rt; |
| bits<8> addr; |
| let Inst{8-6} = addr{5-3}; // Rm |
| let Inst{5-3} = addr{2-0}; // Rn |
| let Inst{2-0} = Rt; |
| } |
| class T1pILdStEncodeImm<bits<4> opA, bit opB, dag oops, dag iops, AddrMode am, |
| InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : Thumb1pI<oops, iops, am, 2, itin, opc, asm, "", pattern>, |
| T1LoadStore<opA, {opB,?,?}> { |
| bits<3> Rt; |
| bits<8> addr; |
| let Inst{10-6} = addr{7-3}; // imm5 |
| let Inst{5-3} = addr{2-0}; // Rn |
| let Inst{2-0} = Rt; |
| } |
| |
| // A6.2.5 Miscellaneous 16-bit instructions encoding. |
| class T1Misc<bits<7> opcode> : Encoding16 { |
| let Inst{15-12} = 0b1011; |
| let Inst{11-5} = opcode; |
| } |
| |
| // Thumb2I - Thumb2 instruction. Almost all Thumb2 instructions are predicable. |
| class Thumb2I<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb2]; |
| let DecoderNamespace = "Thumb2"; |
| } |
| |
| // Same as Thumb2I except it can optionally modify CPSR. Note it's modeled as an |
| // input operand since by default it's a zero register. It will become an |
| // implicit def once it's "flipped". |
| // |
| // FIXME: This uses unified syntax so {s} comes before {p}. We should make it |
| // more consistent. |
| class Thumb2sI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| bits<1> s; // condition-code set flag ('1' if the insn should set the flags) |
| let Inst{20} = s; |
| |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p, cc_out:$s)); |
| let AsmString = !strconcat(opc, "${s}${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb2]; |
| let DecoderNamespace = "Thumb2"; |
| } |
| |
| // Special cases |
| class Thumb2XI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb2]; |
| let DecoderNamespace = "Thumb2"; |
| } |
| |
| class ThumbXI<dag oops, dag iops, AddrMode am, int sz, |
| InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, IndexModeNone, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; |
| let DecoderNamespace = "Thumb"; |
| } |
| |
| class T2I<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeNone, 4, itin, opc, asm, "", pattern>; |
| class T2Ii12<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_i12, 4, itin, opc, asm, "",pattern>; |
| class T2Ii8<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_i8, 4, itin, opc, asm, "", pattern>; |
| class T2Iso<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_so, 4, itin, opc, asm, "", pattern>; |
| class T2Ipc<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_pc, 4, itin, opc, asm, "", pattern>; |
| class T2Ii8s4<bit P, bit W, bit isLoad, dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_i8s4, 4, itin, opc, asm, cstr, |
| pattern> { |
| bits<4> Rt; |
| bits<4> Rt2; |
| bits<13> addr; |
| let Inst{31-25} = 0b1110100; |
| let Inst{24} = P; |
| let Inst{23} = addr{8}; |
| let Inst{22} = 1; |
| let Inst{21} = W; |
| let Inst{20} = isLoad; |
| let Inst{19-16} = addr{12-9}; |
| let Inst{15-12} = Rt{3-0}; |
| let Inst{11-8} = Rt2{3-0}; |
| let Inst{7-0} = addr{7-0}; |
| } |
| class T2Ii8s4post<bit P, bit W, bit isLoad, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, string cstr, |
| list<dag> pattern> |
| : Thumb2I<oops, iops, AddrModeT2_i8s4, 4, itin, opc, asm, cstr, |
| pattern> { |
| bits<4> Rt; |
| bits<4> Rt2; |
| bits<4> addr; |
| bits<9> imm; |
| let Inst{31-25} = 0b1110100; |
| let Inst{24} = P; |
| let Inst{23} = imm{8}; |
| let Inst{22} = 1; |
| let Inst{21} = W; |
| let Inst{20} = isLoad; |
| let Inst{19-16} = addr; |
| let Inst{15-12} = Rt{3-0}; |
| let Inst{11-8} = Rt2{3-0}; |
| let Inst{7-0} = imm{7-0}; |
| } |
| |
| class T2sI<dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : Thumb2sI<oops, iops, AddrModeNone, 4, itin, opc, asm, "", pattern>; |
| |
| class T2XI<dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : Thumb2XI<oops, iops, AddrModeNone, 4, itin, asm, "", pattern>; |
| class T2JTI<dag oops, dag iops, InstrItinClass itin, |
| string asm, list<dag> pattern> |
| : Thumb2XI<oops, iops, AddrModeNone, 0, itin, asm, "", pattern>; |
| |
| // Move to/from coprocessor instructions |
| class T2Cop<bits<4> opc, dag oops, dag iops, string asm, list<dag> pattern> |
| : T2XI <oops, iops, NoItinerary, asm, pattern>, Requires<[IsThumb2]> { |
| let Inst{31-28} = opc; |
| } |
| |
| // Two-address instructions |
| class T2XIt<dag oops, dag iops, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : Thumb2XI<oops, iops, AddrModeNone, 4, itin, asm, cstr, pattern>; |
| |
| // T2Ipreldst - Thumb2 pre-indexed load / store instructions. |
| class T2Ipreldst<bit signed, bits<2> opcod, bit load, bit pre, |
| dag oops, dag iops, |
| AddrMode am, IndexMode im, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstARM<am, 4, im, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb2]; |
| let DecoderNamespace = "Thumb2"; |
| |
| bits<4> Rt; |
| bits<13> addr; |
| let Inst{31-27} = 0b11111; |
| let Inst{26-25} = 0b00; |
| let Inst{24} = signed; |
| let Inst{23} = 0; |
| let Inst{22-21} = opcod; |
| let Inst{20} = load; |
| let Inst{19-16} = addr{12-9}; |
| let Inst{15-12} = Rt{3-0}; |
| let Inst{11} = 1; |
| // (P, W) = (1, 1) Pre-indexed or (0, 1) Post-indexed |
| let Inst{10} = pre; // The P bit. |
| let Inst{9} = addr{8}; // Sign bit |
| let Inst{8} = 1; // The W bit. |
| let Inst{7-0} = addr{7-0}; |
| |
| let DecoderMethod = "DecodeT2LdStPre"; |
| } |
| |
| // T2Ipostldst - Thumb2 post-indexed load / store instructions. |
| class T2Ipostldst<bit signed, bits<2> opcod, bit load, bit pre, |
| dag oops, dag iops, |
| AddrMode am, IndexMode im, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstARM<am, 4, im, ThumbFrm, GenericDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [IsThumb2]; |
| let DecoderNamespace = "Thumb2"; |
| |
| bits<4> Rt; |
| bits<4> Rn; |
| bits<9> offset; |
| let Inst{31-27} = 0b11111; |
| let Inst{26-25} = 0b00; |
| let Inst{24} = signed; |
| let Inst{23} = 0; |
| let Inst{22-21} = opcod; |
| let Inst{20} = load; |
| let Inst{19-16} = Rn; |
| let Inst{15-12} = Rt{3-0}; |
| let Inst{11} = 1; |
| // (P, W) = (1, 1) Pre-indexed or (0, 1) Post-indexed |
| let Inst{10} = pre; // The P bit. |
| let Inst{9} = offset{8}; // Sign bit |
| let Inst{8} = 1; // The W bit. |
| let Inst{7-0} = offset{7-0}; |
| |
| let DecoderMethod = "DecodeT2LdStPre"; |
| } |
| |
| // Tv5Pat - Same as Pat<>, but requires V5T Thumb mode. |
| class Tv5Pat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only, HasV5T]; |
| } |
| |
| // T1Pat - Same as Pat<>, but requires that the compiler be in Thumb1 mode. |
| class T1Pat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; |
| } |
| |
| // T2v6Pat - Same as Pat<>, but requires V6T2 Thumb2 mode. |
| class T2v6Pat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsThumb2, HasV6T2]; |
| } |
| |
| // T2Pat - Same as Pat<>, but requires that the compiler be in Thumb2 mode. |
| class T2Pat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [IsThumb2]; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // ARM VFP Instruction templates. |
| // |
| |
| // Almost all VFP instructions are predicable. |
| class VFPI<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, im, f, VFPDomain, cstr, itin> { |
| bits<4> p; |
| let Inst{31-28} = p; |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", asm); |
| let Pattern = pattern; |
| let PostEncoderMethod = "VFPThumb2PostEncoder"; |
| let DecoderNamespace = "VFP"; |
| list<Predicate> Predicates = [HasVFP2]; |
| } |
| |
| // Special cases |
| class VFPXI<dag oops, dag iops, AddrMode am, int sz, |
| IndexMode im, Format f, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : InstARM<am, sz, im, f, VFPDomain, cstr, itin> { |
| bits<4> p; |
| let Inst{31-28} = p; |
| let OutOperandList = oops; |
| let InOperandList = iops; |
| let AsmString = asm; |
| let Pattern = pattern; |
| let PostEncoderMethod = "VFPThumb2PostEncoder"; |
| let DecoderNamespace = "VFP"; |
| list<Predicate> Predicates = [HasVFP2]; |
| } |
| |
| class VFPAI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : VFPI<oops, iops, AddrModeNone, 4, IndexModeNone, f, itin, |
| opc, asm, "", pattern> { |
| let PostEncoderMethod = "VFPThumb2PostEncoder"; |
| } |
| |
| // ARM VFP addrmode5 loads and stores |
| class ADI5<bits<4> opcod1, bits<2> opcod2, dag oops, dag iops, |
| InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : VFPI<oops, iops, AddrMode5, 4, IndexModeNone, |
| VFPLdStFrm, itin, opc, asm, "", pattern> { |
| // Instruction operands. |
| bits<5> Dd; |
| bits<13> addr; |
| |
| // Encode instruction operands. |
| let Inst{23} = addr{8}; // U (add = (U == '1')) |
| let Inst{22} = Dd{4}; |
| let Inst{19-16} = addr{12-9}; // Rn |
| let Inst{15-12} = Dd{3-0}; |
| let Inst{7-0} = addr{7-0}; // imm8 |
| |
| // TODO: Mark the instructions with the appropriate subtarget info. |
| let Inst{27-24} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 1; // Double precision |
| |
| // Loads & stores operate on both NEON and VFP pipelines. |
| let D = VFPNeonDomain; |
| } |
| |
| class ASI5<bits<4> opcod1, bits<2> opcod2, dag oops, dag iops, |
| InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : VFPI<oops, iops, AddrMode5, 4, IndexModeNone, |
| VFPLdStFrm, itin, opc, asm, "", pattern> { |
| // Instruction operands. |
| bits<5> Sd; |
| bits<13> addr; |
| |
| // Encode instruction operands. |
| let Inst{23} = addr{8}; // U (add = (U == '1')) |
| let Inst{22} = Sd{0}; |
| let Inst{19-16} = addr{12-9}; // Rn |
| let Inst{15-12} = Sd{4-1}; |
| let Inst{7-0} = addr{7-0}; // imm8 |
| |
| // TODO: Mark the instructions with the appropriate subtarget info. |
| let Inst{27-24} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 0; // Single precision |
| |
| // Loads & stores operate on both NEON and VFP pipelines. |
| let D = VFPNeonDomain; |
| } |
| |
| // VFP Load / store multiple pseudo instructions. |
| class PseudoVFPLdStM<dag oops, dag iops, InstrItinClass itin, string cstr, |
| list<dag> pattern> |
| : InstARM<AddrMode4, 4, IndexModeNone, Pseudo, VFPNeonDomain, |
| cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [HasVFP2]; |
| } |
| |
| // Load / store multiple |
| class AXDI4<dag oops, dag iops, IndexMode im, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : VFPXI<oops, iops, AddrMode4, 4, im, |
| VFPLdStMulFrm, itin, asm, cstr, pattern> { |
| // Instruction operands. |
| bits<4> Rn; |
| bits<13> regs; |
| |
| // Encode instruction operands. |
| let Inst{19-16} = Rn; |
| let Inst{22} = regs{12}; |
| let Inst{15-12} = regs{11-8}; |
| let Inst{7-0} = regs{7-0}; |
| |
| // TODO: Mark the instructions with the appropriate subtarget info. |
| let Inst{27-25} = 0b110; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 1; // Double precision |
| } |
| |
| class AXSI4<dag oops, dag iops, IndexMode im, InstrItinClass itin, |
| string asm, string cstr, list<dag> pattern> |
| : VFPXI<oops, iops, AddrMode4, 4, im, |
| VFPLdStMulFrm, itin, asm, cstr, pattern> { |
| // Instruction operands. |
| bits<4> Rn; |
| bits<13> regs; |
| |
| // Encode instruction operands. |
| let Inst{19-16} = Rn; |
| let Inst{22} = regs{8}; |
| let Inst{15-12} = regs{12-9}; |
| let Inst{7-0} = regs{7-0}; |
| |
| // TODO: Mark the instructions with the appropriate subtarget info. |
| let Inst{27-25} = 0b110; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 0; // Single precision |
| } |
| |
| // Double precision, unary |
| class ADuI<bits<5> opcod1, bits<2> opcod2, bits<4> opcod3, bits<2> opcod4, |
| bit opcod5, dag oops, dag iops, InstrItinClass itin, string opc, |
| string asm, list<dag> pattern> |
| : VFPAI<oops, iops, VFPUnaryFrm, itin, opc, asm, pattern> { |
| // Instruction operands. |
| bits<5> Dd; |
| bits<5> Dm; |
| |
| // Encode instruction operands. |
| let Inst{3-0} = Dm{3-0}; |
| let Inst{5} = Dm{4}; |
| let Inst{15-12} = Dd{3-0}; |
| let Inst{22} = Dd{4}; |
| |
| let Inst{27-23} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{19-16} = opcod3; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 1; // Double precision |
| let Inst{7-6} = opcod4; |
| let Inst{4} = opcod5; |
| } |
| |
| // Double precision, binary |
| class ADbI<bits<5> opcod1, bits<2> opcod2, bit op6, bit op4, dag oops, |
| dag iops, InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : VFPAI<oops, iops, VFPBinaryFrm, itin, opc, asm, pattern> { |
| // Instruction operands. |
| bits<5> Dd; |
| bits<5> Dn; |
| bits<5> Dm; |
| |
| // Encode instruction operands. |
| let Inst{3-0} = Dm{3-0}; |
| let Inst{5} = Dm{4}; |
| let Inst{19-16} = Dn{3-0}; |
| let Inst{7} = Dn{4}; |
| let Inst{15-12} = Dd{3-0}; |
| let Inst{22} = Dd{4}; |
| |
| let Inst{27-23} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 1; // Double precision |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| } |
| |
| // Single precision, unary |
| class ASuI<bits<5> opcod1, bits<2> opcod2, bits<4> opcod3, bits<2> opcod4, |
| bit opcod5, dag oops, dag iops, InstrItinClass itin, string opc, |
| string asm, list<dag> pattern> |
| : VFPAI<oops, iops, VFPUnaryFrm, itin, opc, asm, pattern> { |
| // Instruction operands. |
| bits<5> Sd; |
| bits<5> Sm; |
| |
| // Encode instruction operands. |
| let Inst{3-0} = Sm{4-1}; |
| let Inst{5} = Sm{0}; |
| let Inst{15-12} = Sd{4-1}; |
| let Inst{22} = Sd{0}; |
| |
| let Inst{27-23} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{19-16} = opcod3; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 0; // Single precision |
| let Inst{7-6} = opcod4; |
| let Inst{4} = opcod5; |
| } |
| |
| // Single precision unary, if no NEON. Same as ASuI except not available if |
| // NEON is enabled. |
| class ASuIn<bits<5> opcod1, bits<2> opcod2, bits<4> opcod3, bits<2> opcod4, |
| bit opcod5, dag oops, dag iops, InstrItinClass itin, string opc, |
| string asm, list<dag> pattern> |
| : ASuI<opcod1, opcod2, opcod3, opcod4, opcod5, oops, iops, itin, opc, asm, |
| pattern> { |
| list<Predicate> Predicates = [HasVFP2,DontUseNEONForFP]; |
| } |
| |
| // Single precision, binary |
| class ASbI<bits<5> opcod1, bits<2> opcod2, bit op6, bit op4, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : VFPAI<oops, iops, VFPBinaryFrm, itin, opc, asm, pattern> { |
| // Instruction operands. |
| bits<5> Sd; |
| bits<5> Sn; |
| bits<5> Sm; |
| |
| // Encode instruction operands. |
| let Inst{3-0} = Sm{4-1}; |
| let Inst{5} = Sm{0}; |
| let Inst{19-16} = Sn{4-1}; |
| let Inst{7} = Sn{0}; |
| let Inst{15-12} = Sd{4-1}; |
| let Inst{22} = Sd{0}; |
| |
| let Inst{27-23} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{11-9} = 0b101; |
| let Inst{8} = 0; // Single precision |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| } |
| |
| // Single precision binary, if no NEON. Same as ASbI except not available if |
| // NEON is enabled. |
| class ASbIn<bits<5> opcod1, bits<2> opcod2, bit op6, bit op4, dag oops, |
| dag iops, InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : ASbI<opcod1, opcod2, op6, op4, oops, iops, itin, opc, asm, pattern> { |
| list<Predicate> Predicates = [HasVFP2,DontUseNEONForFP]; |
| |
| // Instruction operands. |
| bits<5> Sd; |
| bits<5> Sn; |
| bits<5> Sm; |
| |
| // Encode instruction operands. |
| let Inst{3-0} = Sm{4-1}; |
| let Inst{5} = Sm{0}; |
| let Inst{19-16} = Sn{4-1}; |
| let Inst{7} = Sn{0}; |
| let Inst{15-12} = Sd{4-1}; |
| let Inst{22} = Sd{0}; |
| } |
| |
| // VFP conversion instructions |
| class AVConv1I<bits<5> opcod1, bits<2> opcod2, bits<4> opcod3, bits<4> opcod4, |
| dag oops, dag iops, InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : VFPAI<oops, iops, VFPConv1Frm, itin, opc, asm, pattern> { |
| let Inst{27-23} = opcod1; |
| let Inst{21-20} = opcod2; |
| let Inst{19-16} = opcod3; |
| let Inst{11-8} = opcod4; |
| let Inst{6} = 1; |
| let Inst{4} = 0; |
| } |
| |
| // VFP conversion between floating-point and fixed-point |
| class AVConv1XI<bits<5> op1, bits<2> op2, bits<4> op3, bits<4> op4, bit op5, |
| dag oops, dag iops, InstrItinClass itin, string opc, string asm, |
| list<dag> pattern> |
| : AVConv1I<op1, op2, op3, op4, oops, iops, itin, opc, asm, pattern> { |
| // size (fixed-point number): sx == 0 ? 16 : 32 |
| let Inst{7} = op5; // sx |
| } |
| |
| // VFP conversion instructions, if no NEON |
| class AVConv1In<bits<5> opcod1, bits<2> opcod2, bits<4> opcod3, bits<4> opcod4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : AVConv1I<opcod1, opcod2, opcod3, opcod4, oops, iops, itin, opc, asm, |
| pattern> { |
| list<Predicate> Predicates = [HasVFP2,DontUseNEONForFP]; |
| } |
| |
| class AVConvXI<bits<8> opcod1, bits<4> opcod2, dag oops, dag iops, Format f, |
| InstrItinClass itin, |
| string opc, string asm, list<dag> pattern> |
| : VFPAI<oops, iops, f, itin, opc, asm, pattern> { |
| let Inst{27-20} = opcod1; |
| let Inst{11-8} = opcod2; |
| let Inst{4} = 1; |
| } |
| |
| class AVConv2I<bits<8> opcod1, bits<4> opcod2, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AVConvXI<opcod1, opcod2, oops, iops, VFPConv2Frm, itin, opc, asm, pattern>; |
| |
| class AVConv3I<bits<8> opcod1, bits<4> opcod2, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AVConvXI<opcod1, opcod2, oops, iops, VFPConv3Frm, itin, opc, asm, pattern>; |
| |
| class AVConv4I<bits<8> opcod1, bits<4> opcod2, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AVConvXI<opcod1, opcod2, oops, iops, VFPConv4Frm, itin, opc, asm, pattern>; |
| |
| class AVConv5I<bits<8> opcod1, bits<4> opcod2, dag oops, dag iops, |
| InstrItinClass itin, string opc, string asm, list<dag> pattern> |
| : AVConvXI<opcod1, opcod2, oops, iops, VFPConv5Frm, itin, opc, asm, pattern>; |
| |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // ARM NEON Instruction templates. |
| // |
| |
| class NeonI<dag oops, dag iops, AddrMode am, IndexMode im, Format f, |
| InstrItinClass itin, string opc, string dt, string asm, string cstr, |
| list<dag> pattern> |
| : InstARM<am, 4, im, f, NeonDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", ".", dt, "\t", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [HasNEON]; |
| let DecoderNamespace = "NEON"; |
| } |
| |
| // Same as NeonI except it does not have a "data type" specifier. |
| class NeonXI<dag oops, dag iops, AddrMode am, IndexMode im, Format f, |
| InstrItinClass itin, string opc, string asm, string cstr, |
| list<dag> pattern> |
| : InstARM<am, 4, im, f, NeonDomain, cstr, itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", "\t", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [HasNEON]; |
| let DecoderNamespace = "NEON"; |
| } |
| |
| class NLdSt<bit op23, bits<2> op21_20, bits<4> op11_8, bits<4> op7_4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : NeonI<oops, iops, AddrMode6, IndexModeNone, NLdStFrm, itin, opc, dt, asm, |
| cstr, pattern> { |
| let Inst{31-24} = 0b11110100; |
| let Inst{23} = op23; |
| let Inst{21-20} = op21_20; |
| let Inst{11-8} = op11_8; |
| let Inst{7-4} = op7_4; |
| |
| let PostEncoderMethod = "NEONThumb2LoadStorePostEncoder"; |
| let DecoderNamespace = "NEONLoadStore"; |
| |
| bits<5> Vd; |
| bits<6> Rn; |
| bits<4> Rm; |
| |
| let Inst{22} = Vd{4}; |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{19-16} = Rn{3-0}; |
| let Inst{3-0} = Rm{3-0}; |
| } |
| |
| class NLdStLn<bit op23, bits<2> op21_20, bits<4> op11_8, bits<4> op7_4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : NLdSt<op23, op21_20, op11_8, op7_4, oops, iops, itin, opc, |
| dt, asm, cstr, pattern> { |
| bits<3> lane; |
| } |
| |
| class PseudoNLdSt<dag oops, dag iops, InstrItinClass itin, string cstr> |
| : InstARM<AddrMode6, 4, IndexModeNone, Pseudo, NeonDomain, cstr, |
| itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| list<Predicate> Predicates = [HasNEON]; |
| } |
| |
| class PseudoNeonI<dag oops, dag iops, InstrItinClass itin, string cstr, |
| list<dag> pattern> |
| : InstARM<AddrModeNone, 4, IndexModeNone, Pseudo, NeonDomain, cstr, |
| itin> { |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [HasNEON]; |
| } |
| |
| class NDataI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : NeonI<oops, iops, AddrModeNone, IndexModeNone, f, itin, opc, dt, asm, cstr, |
| pattern> { |
| let Inst{31-25} = 0b1111001; |
| let PostEncoderMethod = "NEONThumb2DataIPostEncoder"; |
| let DecoderNamespace = "NEONData"; |
| } |
| |
| class NDataXI<dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : NeonXI<oops, iops, AddrModeNone, IndexModeNone, f, itin, opc, asm, |
| cstr, pattern> { |
| let Inst{31-25} = 0b1111001; |
| let PostEncoderMethod = "NEONThumb2DataIPostEncoder"; |
| let DecoderNamespace = "NEONData"; |
| } |
| |
| // NEON "one register and a modified immediate" format. |
| class N1ModImm<bit op23, bits<3> op21_19, bits<4> op11_8, bit op7, bit op6, |
| bit op5, bit op4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, |
| list<dag> pattern> |
| : NDataI<oops, iops, N1RegModImmFrm, itin, opc, dt, asm, cstr, pattern> { |
| let Inst{23} = op23; |
| let Inst{21-19} = op21_19; |
| let Inst{11-8} = op11_8; |
| let Inst{7} = op7; |
| let Inst{6} = op6; |
| let Inst{5} = op5; |
| let Inst{4} = op4; |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<13> SIMM; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{24} = SIMM{7}; |
| let Inst{18-16} = SIMM{6-4}; |
| let Inst{3-0} = SIMM{3-0}; |
| let DecoderMethod = "DecodeNEONModImmInstruction"; |
| } |
| |
| // NEON 2 vector register format. |
| class N2V<bits<2> op24_23, bits<2> op21_20, bits<2> op19_18, bits<2> op17_16, |
| bits<5> op11_7, bit op6, bit op4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : NDataI<oops, iops, N2RegFrm, itin, opc, dt, asm, cstr, pattern> { |
| let Inst{24-23} = op24_23; |
| let Inst{21-20} = op21_20; |
| let Inst{19-18} = op19_18; |
| let Inst{17-16} = op17_16; |
| let Inst{11-7} = op11_7; |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vm; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = Vm{4}; |
| } |
| |
| // Same as N2V except it doesn't have a datatype suffix. |
| class N2VX<bits<2> op24_23, bits<2> op21_20, bits<2> op19_18, bits<2> op17_16, |
| bits<5> op11_7, bit op6, bit op4, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : NDataXI<oops, iops, N2RegFrm, itin, opc, asm, cstr, pattern> { |
| let Inst{24-23} = op24_23; |
| let Inst{21-20} = op21_20; |
| let Inst{19-18} = op19_18; |
| let Inst{17-16} = op17_16; |
| let Inst{11-7} = op11_7; |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vm; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = Vm{4}; |
| } |
| |
| // NEON 2 vector register with immediate. |
| class N2VImm<bit op24, bit op23, bits<4> op11_8, bit op7, bit op6, bit op4, |
| dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : NDataI<oops, iops, f, itin, opc, dt, asm, cstr, pattern> { |
| let Inst{24} = op24; |
| let Inst{23} = op23; |
| let Inst{11-8} = op11_8; |
| let Inst{7} = op7; |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vm; |
| bits<6> SIMM; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = Vm{4}; |
| let Inst{21-16} = SIMM{5-0}; |
| } |
| |
| // NEON 3 vector register format. |
| |
| class N3VCommon<bit op24, bit op23, bits<2> op21_20, bits<4> op11_8, bit op6, |
| bit op4, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, |
| list<dag> pattern> |
| : NDataI<oops, iops, f, itin, opc, dt, asm, cstr, pattern> { |
| let Inst{24} = op24; |
| let Inst{23} = op23; |
| let Inst{21-20} = op21_20; |
| let Inst{11-8} = op11_8; |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| } |
| |
| class N3V<bit op24, bit op23, bits<2> op21_20, bits<4> op11_8, bit op6, bit op4, |
| dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, list<dag> pattern> |
| : N3VCommon<op24, op23, op21_20, op11_8, op6, op4, |
| oops, iops, f, itin, opc, dt, asm, cstr, pattern> { |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vn; |
| bits<5> Vm; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{19-16} = Vn{3-0}; |
| let Inst{7} = Vn{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = Vm{4}; |
| } |
| |
| class N3VLane32<bit op24, bit op23, bits<2> op21_20, bits<4> op11_8, bit op6, |
| bit op4, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, |
| list<dag> pattern> |
| : N3VCommon<op24, op23, op21_20, op11_8, op6, op4, |
| oops, iops, f, itin, opc, dt, asm, cstr, pattern> { |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vn; |
| bits<5> Vm; |
| bit lane; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{19-16} = Vn{3-0}; |
| let Inst{7} = Vn{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = lane; |
| } |
| |
| class N3VLane16<bit op24, bit op23, bits<2> op21_20, bits<4> op11_8, bit op6, |
| bit op4, dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, string cstr, |
| list<dag> pattern> |
| : N3VCommon<op24, op23, op21_20, op11_8, op6, op4, |
| oops, iops, f, itin, opc, dt, asm, cstr, pattern> { |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vn; |
| bits<5> Vm; |
| bits<2> lane; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{19-16} = Vn{3-0}; |
| let Inst{7} = Vn{4}; |
| let Inst{2-0} = Vm{2-0}; |
| let Inst{5} = lane{1}; |
| let Inst{3} = lane{0}; |
| } |
| |
| // Same as N3V except it doesn't have a data type suffix. |
| class N3VX<bit op24, bit op23, bits<2> op21_20, bits<4> op11_8, bit op6, |
| bit op4, |
| dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string asm, string cstr, list<dag> pattern> |
| : NDataXI<oops, iops, f, itin, opc, asm, cstr, pattern> { |
| let Inst{24} = op24; |
| let Inst{23} = op23; |
| let Inst{21-20} = op21_20; |
| let Inst{11-8} = op11_8; |
| let Inst{6} = op6; |
| let Inst{4} = op4; |
| |
| // Instruction operands. |
| bits<5> Vd; |
| bits<5> Vn; |
| bits<5> Vm; |
| |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{22} = Vd{4}; |
| let Inst{19-16} = Vn{3-0}; |
| let Inst{7} = Vn{4}; |
| let Inst{3-0} = Vm{3-0}; |
| let Inst{5} = Vm{4}; |
| } |
| |
| // NEON VMOVs between scalar and core registers. |
| class NVLaneOp<bits<8> opcod1, bits<4> opcod2, bits<2> opcod3, |
| dag oops, dag iops, Format f, InstrItinClass itin, |
| string opc, string dt, string asm, list<dag> pattern> |
| : InstARM<AddrModeNone, 4, IndexModeNone, f, NeonDomain, |
| "", itin> { |
| let Inst{27-20} = opcod1; |
| let Inst{11-8} = opcod2; |
| let Inst{6-5} = opcod3; |
| let Inst{4} = 1; |
| // A8.6.303, A8.6.328, A8.6.329 |
| let Inst{3-0} = 0b0000; |
| |
| let OutOperandList = oops; |
| let InOperandList = !con(iops, (ins pred:$p)); |
| let AsmString = !strconcat(opc, "${p}", ".", dt, "\t", asm); |
| let Pattern = pattern; |
| list<Predicate> Predicates = [HasNEON]; |
| |
| let PostEncoderMethod = "NEONThumb2DupPostEncoder"; |
| let DecoderNamespace = "NEONDup"; |
| |
| bits<5> V; |
| bits<4> R; |
| bits<4> p; |
| bits<4> lane; |
| |
| let Inst{31-28} = p{3-0}; |
| let Inst{7} = V{4}; |
| let Inst{19-16} = V{3-0}; |
| let Inst{15-12} = R{3-0}; |
| } |
| class NVGetLane<bits<8> opcod1, bits<4> opcod2, bits<2> opcod3, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, list<dag> pattern> |
| : NVLaneOp<opcod1, opcod2, opcod3, oops, iops, NGetLnFrm, itin, |
| opc, dt, asm, pattern>; |
| class NVSetLane<bits<8> opcod1, bits<4> opcod2, bits<2> opcod3, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, list<dag> pattern> |
| : NVLaneOp<opcod1, opcod2, opcod3, oops, iops, NSetLnFrm, itin, |
| opc, dt, asm, pattern>; |
| class NVDup<bits<8> opcod1, bits<4> opcod2, bits<2> opcod3, |
| dag oops, dag iops, InstrItinClass itin, |
| string opc, string dt, string asm, list<dag> pattern> |
| : NVLaneOp<opcod1, opcod2, opcod3, oops, iops, NDupFrm, itin, |
| opc, dt, asm, pattern>; |
| |
| // Vector Duplicate Lane (from scalar to all elements) |
| class NVDupLane<bits<4> op19_16, bit op6, dag oops, dag iops, |
| InstrItinClass itin, string opc, string dt, string asm, |
| list<dag> pattern> |
| : NDataI<oops, iops, NVDupLnFrm, itin, opc, dt, asm, "", pattern> { |
| let Inst{24-23} = 0b11; |
| let Inst{21-20} = 0b11; |
| let Inst{19-16} = op19_16; |
| let Inst{11-7} = 0b11000; |
| let Inst{6} = op6; |
| let Inst{4} = 0; |
| |
| bits<5> Vd; |
| bits<5> Vm; |
| |
| let Inst{22} = Vd{4}; |
| let Inst{15-12} = Vd{3-0}; |
| let Inst{5} = Vm{4}; |
| let Inst{3-0} = Vm{3-0}; |
| } |
| |
| // NEONFPPat - Same as Pat<>, but requires that the compiler be using NEON |
| // for single-precision FP. |
| class NEONFPPat<dag pattern, dag result> : Pat<pattern, result> { |
| list<Predicate> Predicates = [HasNEON,UseNEONForFP]; |
| } |