| ; RUN: llc < %s -mtriple=x86_64-unknown-linux-gnu | FileCheck %s -check-prefix=NORMAL -check-prefix=NORMALFP |
| ; RUN: llc < %s -mtriple=x86_64-windows | FileCheck %s -check-prefix=NOPUSH |
| ; RUN: llc < %s -mtriple=x86_64-apple-darwin | FileCheck %s -check-prefix=NOPUSH -check-prefix=NORMALFP |
| ; RUN: llc < %s -mtriple=x86_64-unknown-linux-gnu -no-x86-call-frame-opt | FileCheck %s -check-prefix=NOPUSH |
| |
| declare void @seven_params(i32 %a, i64 %b, i32 %c, i64 %d, i32 %e, i64 %f, i32 %g) |
| declare void @eightparams(i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h) |
| declare void @eightparams16(i16 %a, i16 %b, i16 %c, i16 %d, i16 %e, i16 %f, i16 %g, i16 %h) |
| declare void @eightparams64(i64 %a, i64 %b, i64 %c, i64 %d, i64 %e, i64 %f, i64 %g, i64 %h) |
| declare void @ten_params(i32 %a, i64 %b, i32 %c, i64 %d, i32 %e, i64 %f, i32 %g, i64 %h, i32 %i, i64 %j) |
| declare void @ten_params_ptr(i32 %a, i64 %b, i32 %c, i64 %d, i32 %e, i64 %f, i32 %g, i8* %h, i32 %i, i64 %j) |
| declare void @cannot_push(float %a, float %b, float %c, float %d, float %e, float %f, float %g, float %h, float %i) |
| |
| ; We should get pushes for the last 4 parameters. Test that the |
| ; in-register parameters are all in the right places, and check |
| ; that the stack manipulations are correct and correctly |
| ; described by the DWARF directives. Test that the switch |
| ; to disable the optimization works and that the optimization |
| ; doesn't kick in on Windows64 where it is not allowed. |
| ; NORMAL-LABEL: test1 |
| ; NORMAL: pushq |
| ; NORMAL-DAG: movl $1, %edi |
| ; NORMAL-DAG: movl $2, %esi |
| ; NORMAL-DAG: movl $3, %edx |
| ; NORMAL-DAG: movl $4, %ecx |
| ; NORMAL-DAG: movl $5, %r8d |
| ; NORMAL-DAG: movl $6, %r9d |
| ; NORMAL: pushq $10 |
| ; NORMAL: .cfi_adjust_cfa_offset 8 |
| ; NORMAL: pushq $9 |
| ; NORMAL: .cfi_adjust_cfa_offset 8 |
| ; NORMAL: pushq $8 |
| ; NORMAL: .cfi_adjust_cfa_offset 8 |
| ; NORMAL: pushq $7 |
| ; NORMAL: .cfi_adjust_cfa_offset 8 |
| ; NORMAL: callq ten_params |
| ; NORMAL: addq $32, %rsp |
| ; NORMAL: .cfi_adjust_cfa_offset -32 |
| ; NORMAL: popq |
| ; NORMAL: retq |
| ; NOPUSH-LABEL: test1 |
| ; NOPUSH-NOT: pushq |
| ; NOPUSH: retq |
| define void @test1() { |
| entry: |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 8, i32 9, i64 10) |
| ret void |
| } |
| |
| ; The presence of a frame pointer should not prevent pushes. But we |
| ; don't need the CFI directives in that case. |
| ; Also check that we generate the right pushes for >8bit immediates. |
| ; NORMALFP-LABEL: test2 |
| ; NORMALFP: pushq $10000 |
| ; NORMALFP-NEXT: pushq $9000 |
| ; NORMALFP-NEXT: pushq $8000 |
| ; NORMALFP-NEXT: pushq $7000 |
| ; NORMALFP-NEXT: callq {{_?}}ten_params |
| define void @test2(i32 %k) { |
| entry: |
| %a = alloca i32, i32 %k |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7000, i64 8000, i32 9000, i64 10000) |
| ret void |
| } |
| |
| ; Parameters 7 & 8 should push a 64-bit register. |
| ; TODO: Note that the regular expressions disallow r8 and r9. That's fine for |
| ; now, because the pushes will always follow the moves into r8 and r9. |
| ; Eventually, though, we want to be able to schedule the pushes better. |
| ; In this example, it will save two copies, because we have to move the |
| ; incoming parameters out of %rdi and %rsi to make room for the outgoing |
| ; parameters. |
| ; NORMAL-LABEL: test3 |
| ; NORMAL: pushq $10000 |
| ; NORMAL: pushq $9000 |
| ; NORMAL: pushq %r{{..}} |
| ; NORMAL: pushq %r{{..}} |
| ; NORMAL: callq ten_params |
| define void @test3(i32 %a, i64 %b) { |
| entry: |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 %a, i64 %b, i32 9000, i64 10000) |
| ret void |
| } |
| |
| ; Check that we avoid the optimization for just one push. |
| ; NORMAL-LABEL: test4 |
| ; NORMAL: movl $7, (%rsp) |
| ; NORMAL: callq seven_params |
| define void @test4() { |
| entry: |
| call void @seven_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7) |
| ret void |
| } |
| |
| ; Check that pushing link-time constant addresses works correctly |
| ; NORMAL-LABEL: test5 |
| ; NORMAL: pushq $10 |
| ; NORMAL: pushq $9 |
| ; NORMAL: pushq $ext |
| ; NORMAL: pushq $7 |
| ; NORMAL: callq ten_params_ptr |
| @ext = external constant i8 |
| define void @test5() { |
| entry: |
| call void @ten_params_ptr(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i8* @ext, i32 9, i64 10) |
| ret void |
| } |
| |
| ; Check that we fuse 64-bit loads but not 32-bit loads into PUSH mem. |
| ; NORMAL-LABEL: test6 |
| ; NORMAL: movq %rsi, [[REG64:%.+]] |
| ; NORMAL: pushq $10 |
| ; NORMAL: pushq $9 |
| ; NORMAL: pushq ([[REG64]]) |
| ; NORMAL: pushq {{%r..}} |
| ; NORMAL: callq ten_params |
| define void @test6(i32* %p32, i64* %p64) { |
| entry: |
| %v32 = load i32, i32* %p32 |
| %v64 = load i64, i64* %p64 |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 %v32, i64 %v64, i32 9, i64 10) |
| ret void |
| } |
| |
| ; Fold stack-relative loads into the push with correct offsets. |
| ; Do the same for an indirect call whose address is loaded from the stack. |
| ; On entry, %p7 is at 8(%rsp) and %p8 is at 16(%rsp). Prior to the call |
| ; sequence, 72 bytes are allocated to the stack, 48 for register saves and |
| ; 24 for local storage and alignment, so %p7 is at 80(%rsp) and %p8 is at |
| ; 88(%rsp). The call address can be stored anywhere in the local space but |
| ; happens to be stored at 8(%rsp). Each push bumps these offsets up by |
| ; 8 bytes. |
| ; NORMAL-LABEL: test7 |
| ; NORMAL: movq %r{{.*}}, 8(%rsp) {{.*Spill$}} |
| ; NORMAL: pushq 88(%rsp) |
| ; NORMAL: pushq $9 |
| ; NORMAL: pushq 96(%rsp) |
| ; NORMAL: pushq $7 |
| ; NORMAL: callq *40(%rsp) |
| define void @test7(i64 %p1, i64 %p2, i64 %p3, i64 %p4, i64 %p5, i64 %p6, i64 %p7, i64 %p8) { |
| entry: |
| %stack_fptr = alloca void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64)* |
| store void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64)* @ten_params, void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64)** %stack_fptr |
| %ten_params_ptr = load volatile void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64)*, void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64)** %stack_fptr |
| call void asm sideeffect "nop", "~{ax},~{bx},~{cx},~{dx},~{bp},~{si},~{di},~{r8},~{r9},~{r10},~{r11},~{r12},~{r13},~{r14},~{r15}"() |
| call void (i32, i64, i32, i64, i32, i64, i32, i64, i32, i64) %ten_params_ptr(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 %p7, i32 9, i64 %p8) |
| ret void |
| } |
| |
| ; We can't fold the load from the global into the push because of |
| ; interference from the store |
| ; NORMAL-LABEL: test8 |
| ; NORMAL: movq the_global(%rip), [[REG:%r.+]] |
| ; NORMAL: movq $42, the_global |
| ; NORMAL: pushq $10 |
| ; NORMAL: pushq $9 |
| ; NORMAL: pushq [[REG]] |
| ; NORMAL: pushq $7 |
| ; NORMAL: callq ten_params |
| @the_global = external global i64 |
| define void @test8() { |
| %myload = load i64, i64* @the_global |
| store i64 42, i64* @the_global |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 %myload, i32 9, i64 10) |
| ret void |
| } |
| |
| |
| ; Converting one function call to use pushes negatively affects |
| ; other calls that pass arguments on the stack without pushes. |
| ; If the cost outweighs the benefit, avoid using pushes. |
| ; NORMAL-LABEL: test9 |
| ; NORMAL: callq cannot_push |
| ; NORMAL-NOT: push |
| ; NORMAL: callq ten_params |
| define void @test9(float %p1) { |
| call void @cannot_push(float 1.0e0, float 2.0e0, float 3.0e0, float 4.0e0, float 5.0e0, float 6.0e0, float 7.0e0, float 8.0e0, float %p1) |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 8, i32 9, i64 10) |
| call void @cannot_push(float 1.0e0, float 2.0e0, float 3.0e0, float 4.0e0, float 5.0e0, float 6.0e0, float 7.0e0, float 8.0e0, float %p1) |
| ret void |
| } |
| |
| ; But if the benefit outweighs the cost, use pushes. |
| ; NORMAL-LABEL: test10 |
| ; NORMAL: callq cannot_push |
| ; NORMAL: pushq $10 |
| ; NORMAL: pushq $9 |
| ; NORMAL: pushq $8 |
| ; NORMAL: pushq $7 |
| ; NORMAL: callq ten_params |
| define void @test10(float %p1) { |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 8, i32 9, i64 10) |
| call void @cannot_push(float 1.0e0, float 2.0e0, float 3.0e0, float 4.0e0, float 5.0e0, float 6.0e0, float 7.0e0, float 8.0e0, float %p1) |
| call void @ten_params(i32 1, i64 2, i32 3, i64 4, i32 5, i64 6, i32 7, i64 8, i32 9, i64 10) |
| ret void |
| } |
| |
| ; NORMAL-LABEL: pr34863_16 |
| ; NORMAL: pushq ${{-1|65535}} |
| ; NORMAL-NEXT: pushq $0 |
| ; NORMAL-NEXT: call |
| define void @pr34863_16(i16 %x) minsize nounwind { |
| entry: |
| tail call void @eightparams16(i16 %x, i16 %x, i16 %x, i16 %x, i16 %x, i16 %x, i16 0, i16 -1) |
| ret void |
| } |
| |
| ; NORMAL-LABEL: pr34863_32 |
| ; NORMAL: pushq ${{-1|65535}} |
| ; NORMAL-NEXT: pushq $0 |
| ; NORMAL-NEXT: call |
| define void @pr34863_32(i32 %x) minsize nounwind { |
| entry: |
| tail call void @eightparams(i32 %x, i32 %x, i32 %x, i32 %x, i32 %x, i32 %x, i32 0, i32 -1) |
| ret void |
| } |
| |
| ; NORMAL-LABEL: pr34863_64 |
| ; NORMAL: pushq ${{-1|65535}} |
| ; NORMAL-NEXT: pushq $0 |
| ; NORMAL-NEXT: call |
| define void @pr34863_64(i64 %x) minsize nounwind { |
| entry: |
| tail call void @eightparams64(i64 %x, i64 %x, i64 %x, i64 %x, i64 %x, i64 %x, i64 0, i64 -1) |
| ret void |
| } |