| //===-- X86FastISel.cpp - X86 FastISel implementation ---------------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file defines the X86-specific support for the FastISel class. Much | |
| // of the target-specific code is generated by tablegen in the file | |
| // X86GenFastISel.inc, which is #included here. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "X86.h" | |
| #include "X86InstrBuilder.h" | |
| #include "X86ISelLowering.h" | |
| #include "X86RegisterInfo.h" | |
| #include "X86Subtarget.h" | |
| #include "X86TargetMachine.h" | |
| #include "llvm/CallingConv.h" | |
| #include "llvm/DerivedTypes.h" | |
| #include "llvm/GlobalVariable.h" | |
| #include "llvm/GlobalAlias.h" | |
| #include "llvm/Instructions.h" | |
| #include "llvm/IntrinsicInst.h" | |
| #include "llvm/Operator.h" | |
| #include "llvm/CodeGen/Analysis.h" | |
| #include "llvm/CodeGen/FastISel.h" | |
| #include "llvm/CodeGen/FunctionLoweringInfo.h" | |
| #include "llvm/CodeGen/MachineConstantPool.h" | |
| #include "llvm/CodeGen/MachineFrameInfo.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/Support/CallSite.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| #include "llvm/Support/GetElementPtrTypeIterator.h" | |
| #include "llvm/Target/TargetOptions.h" | |
| using namespace llvm; | |
| namespace { | |
| class X86FastISel : public FastISel { | |
| /// Subtarget - Keep a pointer to the X86Subtarget around so that we can | |
| /// make the right decision when generating code for different targets. | |
| const X86Subtarget *Subtarget; | |
| /// StackPtr - Register used as the stack pointer. | |
| /// | |
| unsigned StackPtr; | |
| /// X86ScalarSSEf32, X86ScalarSSEf64 - Select between SSE or x87 | |
| /// floating point ops. | |
| /// When SSE is available, use it for f32 operations. | |
| /// When SSE2 is available, use it for f64 operations. | |
| bool X86ScalarSSEf64; | |
| bool X86ScalarSSEf32; | |
| public: | |
| explicit X86FastISel(FunctionLoweringInfo &funcInfo) : FastISel(funcInfo) { | |
| Subtarget = &TM.getSubtarget<X86Subtarget>(); | |
| StackPtr = Subtarget->is64Bit() ? X86::RSP : X86::ESP; | |
| X86ScalarSSEf64 = Subtarget->hasSSE2() || Subtarget->hasAVX(); | |
| X86ScalarSSEf32 = Subtarget->hasSSE1() || Subtarget->hasAVX(); | |
| } | |
| virtual bool TargetSelectInstruction(const Instruction *I); | |
| /// TryToFoldLoad - The specified machine instr operand is a vreg, and that | |
| /// vreg is being provided by the specified load instruction. If possible, | |
| /// try to fold the load as an operand to the instruction, returning true if | |
| /// possible. | |
| virtual bool TryToFoldLoad(MachineInstr *MI, unsigned OpNo, | |
| const LoadInst *LI); | |
| #include "X86GenFastISel.inc" | |
| private: | |
| bool X86FastEmitCompare(const Value *LHS, const Value *RHS, EVT VT); | |
| bool X86FastEmitLoad(EVT VT, const X86AddressMode &AM, unsigned &RR); | |
| bool X86FastEmitStore(EVT VT, const Value *Val, const X86AddressMode &AM); | |
| bool X86FastEmitStore(EVT VT, unsigned Val, const X86AddressMode &AM); | |
| bool X86FastEmitExtend(ISD::NodeType Opc, EVT DstVT, unsigned Src, EVT SrcVT, | |
| unsigned &ResultReg); | |
| bool X86SelectAddress(const Value *V, X86AddressMode &AM); | |
| bool X86SelectCallAddress(const Value *V, X86AddressMode &AM); | |
| bool X86SelectLoad(const Instruction *I); | |
| bool X86SelectStore(const Instruction *I); | |
| bool X86SelectRet(const Instruction *I); | |
| bool X86SelectCmp(const Instruction *I); | |
| bool X86SelectZExt(const Instruction *I); | |
| bool X86SelectBranch(const Instruction *I); | |
| bool X86SelectShift(const Instruction *I); | |
| bool X86SelectSelect(const Instruction *I); | |
| bool X86SelectTrunc(const Instruction *I); | |
| bool X86SelectFPExt(const Instruction *I); | |
| bool X86SelectFPTrunc(const Instruction *I); | |
| bool X86VisitIntrinsicCall(const IntrinsicInst &I); | |
| bool X86SelectCall(const Instruction *I); | |
| bool DoSelectCall(const Instruction *I, const char *MemIntName); | |
| const X86InstrInfo *getInstrInfo() const { | |
| return getTargetMachine()->getInstrInfo(); | |
| } | |
| const X86TargetMachine *getTargetMachine() const { | |
| return static_cast<const X86TargetMachine *>(&TM); | |
| } | |
| unsigned TargetMaterializeConstant(const Constant *C); | |
| unsigned TargetMaterializeAlloca(const AllocaInst *C); | |
| unsigned TargetMaterializeFloatZero(const ConstantFP *CF); | |
| /// isScalarFPTypeInSSEReg - Return true if the specified scalar FP type is | |
| /// computed in an SSE register, not on the X87 floating point stack. | |
| bool isScalarFPTypeInSSEReg(EVT VT) const { | |
| return (VT == MVT::f64 && X86ScalarSSEf64) || // f64 is when SSE2 | |
| (VT == MVT::f32 && X86ScalarSSEf32); // f32 is when SSE1 | |
| } | |
| bool isTypeLegal(Type *Ty, MVT &VT, bool AllowI1 = false); | |
| bool IsMemcpySmall(uint64_t Len); | |
| bool TryEmitSmallMemcpy(X86AddressMode DestAM, | |
| X86AddressMode SrcAM, uint64_t Len); | |
| }; | |
| } // end anonymous namespace. | |
| bool X86FastISel::isTypeLegal(Type *Ty, MVT &VT, bool AllowI1) { | |
| EVT evt = TLI.getValueType(Ty, /*HandleUnknown=*/true); | |
| if (evt == MVT::Other || !evt.isSimple()) | |
| // Unhandled type. Halt "fast" selection and bail. | |
| return false; | |
| VT = evt.getSimpleVT(); | |
| // For now, require SSE/SSE2 for performing floating-point operations, | |
| // since x87 requires additional work. | |
| if (VT == MVT::f64 && !X86ScalarSSEf64) | |
| return false; | |
| if (VT == MVT::f32 && !X86ScalarSSEf32) | |
| return false; | |
| // Similarly, no f80 support yet. | |
| if (VT == MVT::f80) | |
| return false; | |
| // We only handle legal types. For example, on x86-32 the instruction | |
| // selector contains all of the 64-bit instructions from x86-64, | |
| // under the assumption that i64 won't be used if the target doesn't | |
| // support it. | |
| return (AllowI1 && VT == MVT::i1) || TLI.isTypeLegal(VT); | |
| } | |
| #include "X86GenCallingConv.inc" | |
| /// X86FastEmitLoad - Emit a machine instruction to load a value of type VT. | |
| /// The address is either pre-computed, i.e. Ptr, or a GlobalAddress, i.e. GV. | |
| /// Return true and the result register by reference if it is possible. | |
| bool X86FastISel::X86FastEmitLoad(EVT VT, const X86AddressMode &AM, | |
| unsigned &ResultReg) { | |
| // Get opcode and regclass of the output for the given load instruction. | |
| unsigned Opc = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| switch (VT.getSimpleVT().SimpleTy) { | |
| default: return false; | |
| case MVT::i1: | |
| case MVT::i8: | |
| Opc = X86::MOV8rm; | |
| RC = X86::GR8RegisterClass; | |
| break; | |
| case MVT::i16: | |
| Opc = X86::MOV16rm; | |
| RC = X86::GR16RegisterClass; | |
| break; | |
| case MVT::i32: | |
| Opc = X86::MOV32rm; | |
| RC = X86::GR32RegisterClass; | |
| break; | |
| case MVT::i64: | |
| // Must be in x86-64 mode. | |
| Opc = X86::MOV64rm; | |
| RC = X86::GR64RegisterClass; | |
| break; | |
| case MVT::f32: | |
| if (X86ScalarSSEf32) { | |
| Opc = Subtarget->hasAVX() ? X86::VMOVSSrm : X86::MOVSSrm; | |
| RC = X86::FR32RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp32m; | |
| RC = X86::RFP32RegisterClass; | |
| } | |
| break; | |
| case MVT::f64: | |
| if (X86ScalarSSEf64) { | |
| Opc = Subtarget->hasAVX() ? X86::VMOVSDrm : X86::MOVSDrm; | |
| RC = X86::FR64RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp64m; | |
| RC = X86::RFP64RegisterClass; | |
| } | |
| break; | |
| case MVT::f80: | |
| // No f80 support yet. | |
| return false; | |
| } | |
| ResultReg = createResultReg(RC); | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, | |
| DL, TII.get(Opc), ResultReg), AM); | |
| return true; | |
| } | |
| /// X86FastEmitStore - Emit a machine instruction to store a value Val of | |
| /// type VT. The address is either pre-computed, consisted of a base ptr, Ptr | |
| /// and a displacement offset, or a GlobalAddress, | |
| /// i.e. V. Return true if it is possible. | |
| bool | |
| X86FastISel::X86FastEmitStore(EVT VT, unsigned Val, const X86AddressMode &AM) { | |
| // Get opcode and regclass of the output for the given store instruction. | |
| unsigned Opc = 0; | |
| switch (VT.getSimpleVT().SimpleTy) { | |
| case MVT::f80: // No f80 support yet. | |
| default: return false; | |
| case MVT::i1: { | |
| // Mask out all but lowest bit. | |
| unsigned AndResult = createResultReg(X86::GR8RegisterClass); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(X86::AND8ri), AndResult).addReg(Val).addImm(1); | |
| Val = AndResult; | |
| } | |
| // FALLTHROUGH, handling i1 as i8. | |
| case MVT::i8: Opc = X86::MOV8mr; break; | |
| case MVT::i16: Opc = X86::MOV16mr; break; | |
| case MVT::i32: Opc = X86::MOV32mr; break; | |
| case MVT::i64: Opc = X86::MOV64mr; break; // Must be in x86-64 mode. | |
| case MVT::f32: | |
| Opc = X86ScalarSSEf32 ? | |
| (Subtarget->hasAVX() ? X86::VMOVSSmr : X86::MOVSSmr) : X86::ST_Fp32m; | |
| break; | |
| case MVT::f64: | |
| Opc = X86ScalarSSEf64 ? | |
| (Subtarget->hasAVX() ? X86::VMOVSDmr : X86::MOVSDmr) : X86::ST_Fp64m; | |
| break; | |
| } | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, | |
| DL, TII.get(Opc)), AM).addReg(Val); | |
| return true; | |
| } | |
| bool X86FastISel::X86FastEmitStore(EVT VT, const Value *Val, | |
| const X86AddressMode &AM) { | |
| // Handle 'null' like i32/i64 0. | |
| if (isa<ConstantPointerNull>(Val)) | |
| Val = Constant::getNullValue(TD.getIntPtrType(Val->getContext())); | |
| // If this is a store of a simple constant, fold the constant into the store. | |
| if (const ConstantInt *CI = dyn_cast<ConstantInt>(Val)) { | |
| unsigned Opc = 0; | |
| bool Signed = true; | |
| switch (VT.getSimpleVT().SimpleTy) { | |
| default: break; | |
| case MVT::i1: Signed = false; // FALLTHROUGH to handle as i8. | |
| case MVT::i8: Opc = X86::MOV8mi; break; | |
| case MVT::i16: Opc = X86::MOV16mi; break; | |
| case MVT::i32: Opc = X86::MOV32mi; break; | |
| case MVT::i64: | |
| // Must be a 32-bit sign extended value. | |
| if ((int)CI->getSExtValue() == CI->getSExtValue()) | |
| Opc = X86::MOV64mi32; | |
| break; | |
| } | |
| if (Opc) { | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, | |
| DL, TII.get(Opc)), AM) | |
| .addImm(Signed ? (uint64_t) CI->getSExtValue() : | |
| CI->getZExtValue()); | |
| return true; | |
| } | |
| } | |
| unsigned ValReg = getRegForValue(Val); | |
| if (ValReg == 0) | |
| return false; | |
| return X86FastEmitStore(VT, ValReg, AM); | |
| } | |
| /// X86FastEmitExtend - Emit a machine instruction to extend a value Src of | |
| /// type SrcVT to type DstVT using the specified extension opcode Opc (e.g. | |
| /// ISD::SIGN_EXTEND). | |
| bool X86FastISel::X86FastEmitExtend(ISD::NodeType Opc, EVT DstVT, | |
| unsigned Src, EVT SrcVT, | |
| unsigned &ResultReg) { | |
| unsigned RR = FastEmit_r(SrcVT.getSimpleVT(), DstVT.getSimpleVT(), Opc, | |
| Src, /*TODO: Kill=*/false); | |
| if (RR != 0) { | |
| ResultReg = RR; | |
| return true; | |
| } else | |
| return false; | |
| } | |
| /// X86SelectAddress - Attempt to fill in an address from the given value. | |
| /// | |
| bool X86FastISel::X86SelectAddress(const Value *V, X86AddressMode &AM) { | |
| const User *U = NULL; | |
| unsigned Opcode = Instruction::UserOp1; | |
| if (const Instruction *I = dyn_cast<Instruction>(V)) { | |
| // Don't walk into other basic blocks; it's possible we haven't | |
| // visited them yet, so the instructions may not yet be assigned | |
| // virtual registers. | |
| if (FuncInfo.StaticAllocaMap.count(static_cast<const AllocaInst *>(V)) || | |
| FuncInfo.MBBMap[I->getParent()] == FuncInfo.MBB) { | |
| Opcode = I->getOpcode(); | |
| U = I; | |
| } | |
| } else if (const ConstantExpr *C = dyn_cast<ConstantExpr>(V)) { | |
| Opcode = C->getOpcode(); | |
| U = C; | |
| } | |
| if (PointerType *Ty = dyn_cast<PointerType>(V->getType())) | |
| if (Ty->getAddressSpace() > 255) | |
| // Fast instruction selection doesn't support the special | |
| // address spaces. | |
| return false; | |
| switch (Opcode) { | |
| default: break; | |
| case Instruction::BitCast: | |
| // Look past bitcasts. | |
| return X86SelectAddress(U->getOperand(0), AM); | |
| case Instruction::IntToPtr: | |
| // Look past no-op inttoptrs. | |
| if (TLI.getValueType(U->getOperand(0)->getType()) == TLI.getPointerTy()) | |
| return X86SelectAddress(U->getOperand(0), AM); | |
| break; | |
| case Instruction::PtrToInt: | |
| // Look past no-op ptrtoints. | |
| if (TLI.getValueType(U->getType()) == TLI.getPointerTy()) | |
| return X86SelectAddress(U->getOperand(0), AM); | |
| break; | |
| case Instruction::Alloca: { | |
| // Do static allocas. | |
| const AllocaInst *A = cast<AllocaInst>(V); | |
| DenseMap<const AllocaInst*, int>::iterator SI = | |
| FuncInfo.StaticAllocaMap.find(A); | |
| if (SI != FuncInfo.StaticAllocaMap.end()) { | |
| AM.BaseType = X86AddressMode::FrameIndexBase; | |
| AM.Base.FrameIndex = SI->second; | |
| return true; | |
| } | |
| break; | |
| } | |
| case Instruction::Add: { | |
| // Adds of constants are common and easy enough. | |
| if (const ConstantInt *CI = dyn_cast<ConstantInt>(U->getOperand(1))) { | |
| uint64_t Disp = (int32_t)AM.Disp + (uint64_t)CI->getSExtValue(); | |
| // They have to fit in the 32-bit signed displacement field though. | |
| if (isInt<32>(Disp)) { | |
| AM.Disp = (uint32_t)Disp; | |
| return X86SelectAddress(U->getOperand(0), AM); | |
| } | |
| } | |
| break; | |
| } | |
| case Instruction::GetElementPtr: { | |
| X86AddressMode SavedAM = AM; | |
| // Pattern-match simple GEPs. | |
| uint64_t Disp = (int32_t)AM.Disp; | |
| unsigned IndexReg = AM.IndexReg; | |
| unsigned Scale = AM.Scale; | |
| gep_type_iterator GTI = gep_type_begin(U); | |
| // Iterate through the indices, folding what we can. Constants can be | |
| // folded, and one dynamic index can be handled, if the scale is supported. | |
| for (User::const_op_iterator i = U->op_begin() + 1, e = U->op_end(); | |
| i != e; ++i, ++GTI) { | |
| const Value *Op = *i; | |
| if (StructType *STy = dyn_cast<StructType>(*GTI)) { | |
| const StructLayout *SL = TD.getStructLayout(STy); | |
| Disp += SL->getElementOffset(cast<ConstantInt>(Op)->getZExtValue()); | |
| continue; | |
| } | |
| // A array/variable index is always of the form i*S where S is the | |
| // constant scale size. See if we can push the scale into immediates. | |
| uint64_t S = TD.getTypeAllocSize(GTI.getIndexedType()); | |
| for (;;) { | |
| if (const ConstantInt *CI = dyn_cast<ConstantInt>(Op)) { | |
| // Constant-offset addressing. | |
| Disp += CI->getSExtValue() * S; | |
| break; | |
| } | |
| if (isa<AddOperator>(Op) && | |
| (!isa<Instruction>(Op) || | |
| FuncInfo.MBBMap[cast<Instruction>(Op)->getParent()] | |
| == FuncInfo.MBB) && | |
| isa<ConstantInt>(cast<AddOperator>(Op)->getOperand(1))) { | |
| // An add (in the same block) with a constant operand. Fold the | |
| // constant. | |
| ConstantInt *CI = | |
| cast<ConstantInt>(cast<AddOperator>(Op)->getOperand(1)); | |
| Disp += CI->getSExtValue() * S; | |
| // Iterate on the other operand. | |
| Op = cast<AddOperator>(Op)->getOperand(0); | |
| continue; | |
| } | |
| if (IndexReg == 0 && | |
| (!AM.GV || !Subtarget->isPICStyleRIPRel()) && | |
| (S == 1 || S == 2 || S == 4 || S == 8)) { | |
| // Scaled-index addressing. | |
| Scale = S; | |
| IndexReg = getRegForGEPIndex(Op).first; | |
| if (IndexReg == 0) | |
| return false; | |
| break; | |
| } | |
| // Unsupported. | |
| goto unsupported_gep; | |
| } | |
| } | |
| // Check for displacement overflow. | |
| if (!isInt<32>(Disp)) | |
| break; | |
| // Ok, the GEP indices were covered by constant-offset and scaled-index | |
| // addressing. Update the address state and move on to examining the base. | |
| AM.IndexReg = IndexReg; | |
| AM.Scale = Scale; | |
| AM.Disp = (uint32_t)Disp; | |
| if (X86SelectAddress(U->getOperand(0), AM)) | |
| return true; | |
| // If we couldn't merge the gep value into this addr mode, revert back to | |
| // our address and just match the value instead of completely failing. | |
| AM = SavedAM; | |
| break; | |
| unsupported_gep: | |
| // Ok, the GEP indices weren't all covered. | |
| break; | |
| } | |
| } | |
| // Handle constant address. | |
| if (const GlobalValue *GV = dyn_cast<GlobalValue>(V)) { | |
| // Can't handle alternate code models yet. | |
| if (TM.getCodeModel() != CodeModel::Small) | |
| return false; | |
| // Can't handle TLS yet. | |
| if (const GlobalVariable *GVar = dyn_cast<GlobalVariable>(GV)) | |
| if (GVar->isThreadLocal()) | |
| return false; | |
| // Can't handle TLS yet, part 2 (this is slightly crazy, but this is how | |
| // it works...). | |
| if (const GlobalAlias *GA = dyn_cast<GlobalAlias>(GV)) | |
| if (const GlobalVariable *GVar = | |
| dyn_cast_or_null<GlobalVariable>(GA->resolveAliasedGlobal(false))) | |
| if (GVar->isThreadLocal()) | |
| return false; | |
| // RIP-relative addresses can't have additional register operands, so if | |
| // we've already folded stuff into the addressing mode, just force the | |
| // global value into its own register, which we can use as the basereg. | |
| if (!Subtarget->isPICStyleRIPRel() || | |
| (AM.Base.Reg == 0 && AM.IndexReg == 0)) { | |
| // Okay, we've committed to selecting this global. Set up the address. | |
| AM.GV = GV; | |
| // Allow the subtarget to classify the global. | |
| unsigned char GVFlags = Subtarget->ClassifyGlobalReference(GV, TM); | |
| // If this reference is relative to the pic base, set it now. | |
| if (isGlobalRelativeToPICBase(GVFlags)) { | |
| // FIXME: How do we know Base.Reg is free?? | |
| AM.Base.Reg = getInstrInfo()->getGlobalBaseReg(FuncInfo.MF); | |
| } | |
| // Unless the ABI requires an extra load, return a direct reference to | |
| // the global. | |
| if (!isGlobalStubReference(GVFlags)) { | |
| if (Subtarget->isPICStyleRIPRel()) { | |
| // Use rip-relative addressing if we can. Above we verified that the | |
| // base and index registers are unused. | |
| assert(AM.Base.Reg == 0 && AM.IndexReg == 0); | |
| AM.Base.Reg = X86::RIP; | |
| } | |
| AM.GVOpFlags = GVFlags; | |
| return true; | |
| } | |
| // Ok, we need to do a load from a stub. If we've already loaded from | |
| // this stub, reuse the loaded pointer, otherwise emit the load now. | |
| DenseMap<const Value*, unsigned>::iterator I = LocalValueMap.find(V); | |
| unsigned LoadReg; | |
| if (I != LocalValueMap.end() && I->second != 0) { | |
| LoadReg = I->second; | |
| } else { | |
| // Issue load from stub. | |
| unsigned Opc = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| X86AddressMode StubAM; | |
| StubAM.Base.Reg = AM.Base.Reg; | |
| StubAM.GV = GV; | |
| StubAM.GVOpFlags = GVFlags; | |
| // Prepare for inserting code in the local-value area. | |
| SavePoint SaveInsertPt = enterLocalValueArea(); | |
| if (TLI.getPointerTy() == MVT::i64) { | |
| Opc = X86::MOV64rm; | |
| RC = X86::GR64RegisterClass; | |
| if (Subtarget->isPICStyleRIPRel()) | |
| StubAM.Base.Reg = X86::RIP; | |
| } else { | |
| Opc = X86::MOV32rm; | |
| RC = X86::GR32RegisterClass; | |
| } | |
| LoadReg = createResultReg(RC); | |
| MachineInstrBuilder LoadMI = | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(Opc), LoadReg); | |
| addFullAddress(LoadMI, StubAM); | |
| // Ok, back to normal mode. | |
| leaveLocalValueArea(SaveInsertPt); | |
| // Prevent loading GV stub multiple times in same MBB. | |
| LocalValueMap[V] = LoadReg; | |
| } | |
| // Now construct the final address. Note that the Disp, Scale, | |
| // and Index values may already be set here. | |
| AM.Base.Reg = LoadReg; | |
| AM.GV = 0; | |
| return true; | |
| } | |
| } | |
| // If all else fails, try to materialize the value in a register. | |
| if (!AM.GV || !Subtarget->isPICStyleRIPRel()) { | |
| if (AM.Base.Reg == 0) { | |
| AM.Base.Reg = getRegForValue(V); | |
| return AM.Base.Reg != 0; | |
| } | |
| if (AM.IndexReg == 0) { | |
| assert(AM.Scale == 1 && "Scale with no index!"); | |
| AM.IndexReg = getRegForValue(V); | |
| return AM.IndexReg != 0; | |
| } | |
| } | |
| return false; | |
| } | |
| /// X86SelectCallAddress - Attempt to fill in an address from the given value. | |
| /// | |
| bool X86FastISel::X86SelectCallAddress(const Value *V, X86AddressMode &AM) { | |
| const User *U = NULL; | |
| unsigned Opcode = Instruction::UserOp1; | |
| if (const Instruction *I = dyn_cast<Instruction>(V)) { | |
| Opcode = I->getOpcode(); | |
| U = I; | |
| } else if (const ConstantExpr *C = dyn_cast<ConstantExpr>(V)) { | |
| Opcode = C->getOpcode(); | |
| U = C; | |
| } | |
| switch (Opcode) { | |
| default: break; | |
| case Instruction::BitCast: | |
| // Look past bitcasts. | |
| return X86SelectCallAddress(U->getOperand(0), AM); | |
| case Instruction::IntToPtr: | |
| // Look past no-op inttoptrs. | |
| if (TLI.getValueType(U->getOperand(0)->getType()) == TLI.getPointerTy()) | |
| return X86SelectCallAddress(U->getOperand(0), AM); | |
| break; | |
| case Instruction::PtrToInt: | |
| // Look past no-op ptrtoints. | |
| if (TLI.getValueType(U->getType()) == TLI.getPointerTy()) | |
| return X86SelectCallAddress(U->getOperand(0), AM); | |
| break; | |
| } | |
| // Handle constant address. | |
| if (const GlobalValue *GV = dyn_cast<GlobalValue>(V)) { | |
| // Can't handle alternate code models yet. | |
| if (TM.getCodeModel() != CodeModel::Small) | |
| return false; | |
| // RIP-relative addresses can't have additional register operands. | |
| if (Subtarget->isPICStyleRIPRel() && | |
| (AM.Base.Reg != 0 || AM.IndexReg != 0)) | |
| return false; | |
| // Can't handle DLLImport. | |
| if (GV->hasDLLImportLinkage()) | |
| return false; | |
| // Can't handle TLS. | |
| if (const GlobalVariable *GVar = dyn_cast<GlobalVariable>(GV)) | |
| if (GVar->isThreadLocal()) | |
| return false; | |
| // Okay, we've committed to selecting this global. Set up the basic address. | |
| AM.GV = GV; | |
| // No ABI requires an extra load for anything other than DLLImport, which | |
| // we rejected above. Return a direct reference to the global. | |
| if (Subtarget->isPICStyleRIPRel()) { | |
| // Use rip-relative addressing if we can. Above we verified that the | |
| // base and index registers are unused. | |
| assert(AM.Base.Reg == 0 && AM.IndexReg == 0); | |
| AM.Base.Reg = X86::RIP; | |
| } else if (Subtarget->isPICStyleStubPIC()) { | |
| AM.GVOpFlags = X86II::MO_PIC_BASE_OFFSET; | |
| } else if (Subtarget->isPICStyleGOT()) { | |
| AM.GVOpFlags = X86II::MO_GOTOFF; | |
| } | |
| return true; | |
| } | |
| // If all else fails, try to materialize the value in a register. | |
| if (!AM.GV || !Subtarget->isPICStyleRIPRel()) { | |
| if (AM.Base.Reg == 0) { | |
| AM.Base.Reg = getRegForValue(V); | |
| return AM.Base.Reg != 0; | |
| } | |
| if (AM.IndexReg == 0) { | |
| assert(AM.Scale == 1 && "Scale with no index!"); | |
| AM.IndexReg = getRegForValue(V); | |
| return AM.IndexReg != 0; | |
| } | |
| } | |
| return false; | |
| } | |
| /// X86SelectStore - Select and emit code to implement store instructions. | |
| bool X86FastISel::X86SelectStore(const Instruction *I) { | |
| // Atomic stores need special handling. | |
| if (cast<StoreInst>(I)->isAtomic()) | |
| return false; | |
| MVT VT; | |
| if (!isTypeLegal(I->getOperand(0)->getType(), VT, /*AllowI1=*/true)) | |
| return false; | |
| X86AddressMode AM; | |
| if (!X86SelectAddress(I->getOperand(1), AM)) | |
| return false; | |
| return X86FastEmitStore(VT, I->getOperand(0), AM); | |
| } | |
| /// X86SelectRet - Select and emit code to implement ret instructions. | |
| bool X86FastISel::X86SelectRet(const Instruction *I) { | |
| const ReturnInst *Ret = cast<ReturnInst>(I); | |
| const Function &F = *I->getParent()->getParent(); | |
| if (!FuncInfo.CanLowerReturn) | |
| return false; | |
| CallingConv::ID CC = F.getCallingConv(); | |
| if (CC != CallingConv::C && | |
| CC != CallingConv::Fast && | |
| CC != CallingConv::X86_FastCall) | |
| return false; | |
| if (Subtarget->isTargetWin64()) | |
| return false; | |
| // Don't handle popping bytes on return for now. | |
| if (FuncInfo.MF->getInfo<X86MachineFunctionInfo>() | |
| ->getBytesToPopOnReturn() != 0) | |
| return 0; | |
| // fastcc with -tailcallopt is intended to provide a guaranteed | |
| // tail call optimization. Fastisel doesn't know how to do that. | |
| if (CC == CallingConv::Fast && GuaranteedTailCallOpt) | |
| return false; | |
| // Let SDISel handle vararg functions. | |
| if (F.isVarArg()) | |
| return false; | |
| if (Ret->getNumOperands() > 0) { | |
| SmallVector<ISD::OutputArg, 4> Outs; | |
| GetReturnInfo(F.getReturnType(), F.getAttributes().getRetAttributes(), | |
| Outs, TLI); | |
| // Analyze operands of the call, assigning locations to each operand. | |
| SmallVector<CCValAssign, 16> ValLocs; | |
| CCState CCInfo(CC, F.isVarArg(), *FuncInfo.MF, TM, ValLocs, | |
| I->getContext()); | |
| CCInfo.AnalyzeReturn(Outs, RetCC_X86); | |
| const Value *RV = Ret->getOperand(0); | |
| unsigned Reg = getRegForValue(RV); | |
| if (Reg == 0) | |
| return false; | |
| // Only handle a single return value for now. | |
| if (ValLocs.size() != 1) | |
| return false; | |
| CCValAssign &VA = ValLocs[0]; | |
| // Don't bother handling odd stuff for now. | |
| if (VA.getLocInfo() != CCValAssign::Full) | |
| return false; | |
| // Only handle register returns for now. | |
| if (!VA.isRegLoc()) | |
| return false; | |
| // The calling-convention tables for x87 returns don't tell | |
| // the whole story. | |
| if (VA.getLocReg() == X86::ST0 || VA.getLocReg() == X86::ST1) | |
| return false; | |
| unsigned SrcReg = Reg + VA.getValNo(); | |
| EVT SrcVT = TLI.getValueType(RV->getType()); | |
| EVT DstVT = VA.getValVT(); | |
| // Special handling for extended integers. | |
| if (SrcVT != DstVT) { | |
| if (SrcVT != MVT::i1 && SrcVT != MVT::i8 && SrcVT != MVT::i16) | |
| return false; | |
| if (!Outs[0].Flags.isZExt() && !Outs[0].Flags.isSExt()) | |
| return false; | |
| assert(DstVT == MVT::i32 && "X86 should always ext to i32"); | |
| if (SrcVT == MVT::i1) { | |
| if (Outs[0].Flags.isSExt()) | |
| return false; | |
| SrcReg = FastEmitZExtFromI1(MVT::i8, SrcReg, /*TODO: Kill=*/false); | |
| SrcVT = MVT::i8; | |
| } | |
| unsigned Op = Outs[0].Flags.isZExt() ? ISD::ZERO_EXTEND : | |
| ISD::SIGN_EXTEND; | |
| SrcReg = FastEmit_r(SrcVT.getSimpleVT(), DstVT.getSimpleVT(), Op, | |
| SrcReg, /*TODO: Kill=*/false); | |
| } | |
| // Make the copy. | |
| unsigned DstReg = VA.getLocReg(); | |
| const TargetRegisterClass* SrcRC = MRI.getRegClass(SrcReg); | |
| // Avoid a cross-class copy. This is very unlikely. | |
| if (!SrcRC->contains(DstReg)) | |
| return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| DstReg).addReg(SrcReg); | |
| // Mark the register as live out of the function. | |
| MRI.addLiveOut(VA.getLocReg()); | |
| } | |
| // Now emit the RET. | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::RET)); | |
| return true; | |
| } | |
| /// X86SelectLoad - Select and emit code to implement load instructions. | |
| /// | |
| bool X86FastISel::X86SelectLoad(const Instruction *I) { | |
| // Atomic loads need special handling. | |
| if (cast<LoadInst>(I)->isAtomic()) | |
| return false; | |
| MVT VT; | |
| if (!isTypeLegal(I->getType(), VT, /*AllowI1=*/true)) | |
| return false; | |
| X86AddressMode AM; | |
| if (!X86SelectAddress(I->getOperand(0), AM)) | |
| return false; | |
| unsigned ResultReg = 0; | |
| if (X86FastEmitLoad(VT, AM, ResultReg)) { | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static unsigned X86ChooseCmpOpcode(EVT VT, const X86Subtarget *Subtarget) { | |
| bool HasAVX = Subtarget->hasAVX(); | |
| bool X86ScalarSSEf32 = HasAVX || Subtarget->hasSSE1(); | |
| bool X86ScalarSSEf64 = HasAVX || Subtarget->hasSSE2(); | |
| switch (VT.getSimpleVT().SimpleTy) { | |
| default: return 0; | |
| case MVT::i8: return X86::CMP8rr; | |
| case MVT::i16: return X86::CMP16rr; | |
| case MVT::i32: return X86::CMP32rr; | |
| case MVT::i64: return X86::CMP64rr; | |
| case MVT::f32: | |
| return X86ScalarSSEf32 ? (HasAVX ? X86::VUCOMISSrr : X86::UCOMISSrr) : 0; | |
| case MVT::f64: | |
| return X86ScalarSSEf64 ? (HasAVX ? X86::VUCOMISDrr : X86::UCOMISDrr) : 0; | |
| } | |
| } | |
| /// X86ChooseCmpImmediateOpcode - If we have a comparison with RHS as the RHS | |
| /// of the comparison, return an opcode that works for the compare (e.g. | |
| /// CMP32ri) otherwise return 0. | |
| static unsigned X86ChooseCmpImmediateOpcode(EVT VT, const ConstantInt *RHSC) { | |
| switch (VT.getSimpleVT().SimpleTy) { | |
| // Otherwise, we can't fold the immediate into this comparison. | |
| default: return 0; | |
| case MVT::i8: return X86::CMP8ri; | |
| case MVT::i16: return X86::CMP16ri; | |
| case MVT::i32: return X86::CMP32ri; | |
| case MVT::i64: | |
| // 64-bit comparisons are only valid if the immediate fits in a 32-bit sext | |
| // field. | |
| if ((int)RHSC->getSExtValue() == RHSC->getSExtValue()) | |
| return X86::CMP64ri32; | |
| return 0; | |
| } | |
| } | |
| bool X86FastISel::X86FastEmitCompare(const Value *Op0, const Value *Op1, | |
| EVT VT) { | |
| unsigned Op0Reg = getRegForValue(Op0); | |
| if (Op0Reg == 0) return false; | |
| // Handle 'null' like i32/i64 0. | |
| if (isa<ConstantPointerNull>(Op1)) | |
| Op1 = Constant::getNullValue(TD.getIntPtrType(Op0->getContext())); | |
| // We have two options: compare with register or immediate. If the RHS of | |
| // the compare is an immediate that we can fold into this compare, use | |
| // CMPri, otherwise use CMPrr. | |
| if (const ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) { | |
| if (unsigned CompareImmOpc = X86ChooseCmpImmediateOpcode(VT, Op1C)) { | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(CompareImmOpc)) | |
| .addReg(Op0Reg) | |
| .addImm(Op1C->getSExtValue()); | |
| return true; | |
| } | |
| } | |
| unsigned CompareOpc = X86ChooseCmpOpcode(VT, Subtarget); | |
| if (CompareOpc == 0) return false; | |
| unsigned Op1Reg = getRegForValue(Op1); | |
| if (Op1Reg == 0) return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(CompareOpc)) | |
| .addReg(Op0Reg) | |
| .addReg(Op1Reg); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectCmp(const Instruction *I) { | |
| const CmpInst *CI = cast<CmpInst>(I); | |
| MVT VT; | |
| if (!isTypeLegal(I->getOperand(0)->getType(), VT)) | |
| return false; | |
| unsigned ResultReg = createResultReg(&X86::GR8RegClass); | |
| unsigned SetCCOpc; | |
| bool SwapArgs; // false -> compare Op0, Op1. true -> compare Op1, Op0. | |
| switch (CI->getPredicate()) { | |
| case CmpInst::FCMP_OEQ: { | |
| if (!X86FastEmitCompare(CI->getOperand(0), CI->getOperand(1), VT)) | |
| return false; | |
| unsigned EReg = createResultReg(&X86::GR8RegClass); | |
| unsigned NPReg = createResultReg(&X86::GR8RegClass); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::SETEr), EReg); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(X86::SETNPr), NPReg); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(X86::AND8rr), ResultReg).addReg(NPReg).addReg(EReg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| case CmpInst::FCMP_UNE: { | |
| if (!X86FastEmitCompare(CI->getOperand(0), CI->getOperand(1), VT)) | |
| return false; | |
| unsigned NEReg = createResultReg(&X86::GR8RegClass); | |
| unsigned PReg = createResultReg(&X86::GR8RegClass); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::SETNEr), NEReg); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::SETPr), PReg); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::OR8rr),ResultReg) | |
| .addReg(PReg).addReg(NEReg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| case CmpInst::FCMP_OGT: SwapArgs = false; SetCCOpc = X86::SETAr; break; | |
| case CmpInst::FCMP_OGE: SwapArgs = false; SetCCOpc = X86::SETAEr; break; | |
| case CmpInst::FCMP_OLT: SwapArgs = true; SetCCOpc = X86::SETAr; break; | |
| case CmpInst::FCMP_OLE: SwapArgs = true; SetCCOpc = X86::SETAEr; break; | |
| case CmpInst::FCMP_ONE: SwapArgs = false; SetCCOpc = X86::SETNEr; break; | |
| case CmpInst::FCMP_ORD: SwapArgs = false; SetCCOpc = X86::SETNPr; break; | |
| case CmpInst::FCMP_UNO: SwapArgs = false; SetCCOpc = X86::SETPr; break; | |
| case CmpInst::FCMP_UEQ: SwapArgs = false; SetCCOpc = X86::SETEr; break; | |
| case CmpInst::FCMP_UGT: SwapArgs = true; SetCCOpc = X86::SETBr; break; | |
| case CmpInst::FCMP_UGE: SwapArgs = true; SetCCOpc = X86::SETBEr; break; | |
| case CmpInst::FCMP_ULT: SwapArgs = false; SetCCOpc = X86::SETBr; break; | |
| case CmpInst::FCMP_ULE: SwapArgs = false; SetCCOpc = X86::SETBEr; break; | |
| case CmpInst::ICMP_EQ: SwapArgs = false; SetCCOpc = X86::SETEr; break; | |
| case CmpInst::ICMP_NE: SwapArgs = false; SetCCOpc = X86::SETNEr; break; | |
| case CmpInst::ICMP_UGT: SwapArgs = false; SetCCOpc = X86::SETAr; break; | |
| case CmpInst::ICMP_UGE: SwapArgs = false; SetCCOpc = X86::SETAEr; break; | |
| case CmpInst::ICMP_ULT: SwapArgs = false; SetCCOpc = X86::SETBr; break; | |
| case CmpInst::ICMP_ULE: SwapArgs = false; SetCCOpc = X86::SETBEr; break; | |
| case CmpInst::ICMP_SGT: SwapArgs = false; SetCCOpc = X86::SETGr; break; | |
| case CmpInst::ICMP_SGE: SwapArgs = false; SetCCOpc = X86::SETGEr; break; | |
| case CmpInst::ICMP_SLT: SwapArgs = false; SetCCOpc = X86::SETLr; break; | |
| case CmpInst::ICMP_SLE: SwapArgs = false; SetCCOpc = X86::SETLEr; break; | |
| default: | |
| return false; | |
| } | |
| const Value *Op0 = CI->getOperand(0), *Op1 = CI->getOperand(1); | |
| if (SwapArgs) | |
| std::swap(Op0, Op1); | |
| // Emit a compare of Op0/Op1. | |
| if (!X86FastEmitCompare(Op0, Op1, VT)) | |
| return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(SetCCOpc), ResultReg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectZExt(const Instruction *I) { | |
| // Handle zero-extension from i1 to i8, which is common. | |
| if (!I->getOperand(0)->getType()->isIntegerTy(1)) | |
| return false; | |
| EVT DstVT = TLI.getValueType(I->getType()); | |
| if (!TLI.isTypeLegal(DstVT)) | |
| return false; | |
| unsigned ResultReg = getRegForValue(I->getOperand(0)); | |
| if (ResultReg == 0) | |
| return false; | |
| // Set the high bits to zero. | |
| ResultReg = FastEmitZExtFromI1(MVT::i8, ResultReg, /*TODO: Kill=*/false); | |
| if (ResultReg == 0) | |
| return false; | |
| if (DstVT != MVT::i8) { | |
| ResultReg = FastEmit_r(MVT::i8, DstVT.getSimpleVT(), ISD::ZERO_EXTEND, | |
| ResultReg, /*Kill=*/true); | |
| if (ResultReg == 0) | |
| return false; | |
| } | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectBranch(const Instruction *I) { | |
| // Unconditional branches are selected by tablegen-generated code. | |
| // Handle a conditional branch. | |
| const BranchInst *BI = cast<BranchInst>(I); | |
| MachineBasicBlock *TrueMBB = FuncInfo.MBBMap[BI->getSuccessor(0)]; | |
| MachineBasicBlock *FalseMBB = FuncInfo.MBBMap[BI->getSuccessor(1)]; | |
| // Fold the common case of a conditional branch with a comparison | |
| // in the same block (values defined on other blocks may not have | |
| // initialized registers). | |
| if (const CmpInst *CI = dyn_cast<CmpInst>(BI->getCondition())) { | |
| if (CI->hasOneUse() && CI->getParent() == I->getParent()) { | |
| EVT VT = TLI.getValueType(CI->getOperand(0)->getType()); | |
| // Try to take advantage of fallthrough opportunities. | |
| CmpInst::Predicate Predicate = CI->getPredicate(); | |
| if (FuncInfo.MBB->isLayoutSuccessor(TrueMBB)) { | |
| std::swap(TrueMBB, FalseMBB); | |
| Predicate = CmpInst::getInversePredicate(Predicate); | |
| } | |
| bool SwapArgs; // false -> compare Op0, Op1. true -> compare Op1, Op0. | |
| unsigned BranchOpc; // Opcode to jump on, e.g. "X86::JA" | |
| switch (Predicate) { | |
| case CmpInst::FCMP_OEQ: | |
| std::swap(TrueMBB, FalseMBB); | |
| Predicate = CmpInst::FCMP_UNE; | |
| // FALL THROUGH | |
| case CmpInst::FCMP_UNE: SwapArgs = false; BranchOpc = X86::JNE_4; break; | |
| case CmpInst::FCMP_OGT: SwapArgs = false; BranchOpc = X86::JA_4; break; | |
| case CmpInst::FCMP_OGE: SwapArgs = false; BranchOpc = X86::JAE_4; break; | |
| case CmpInst::FCMP_OLT: SwapArgs = true; BranchOpc = X86::JA_4; break; | |
| case CmpInst::FCMP_OLE: SwapArgs = true; BranchOpc = X86::JAE_4; break; | |
| case CmpInst::FCMP_ONE: SwapArgs = false; BranchOpc = X86::JNE_4; break; | |
| case CmpInst::FCMP_ORD: SwapArgs = false; BranchOpc = X86::JNP_4; break; | |
| case CmpInst::FCMP_UNO: SwapArgs = false; BranchOpc = X86::JP_4; break; | |
| case CmpInst::FCMP_UEQ: SwapArgs = false; BranchOpc = X86::JE_4; break; | |
| case CmpInst::FCMP_UGT: SwapArgs = true; BranchOpc = X86::JB_4; break; | |
| case CmpInst::FCMP_UGE: SwapArgs = true; BranchOpc = X86::JBE_4; break; | |
| case CmpInst::FCMP_ULT: SwapArgs = false; BranchOpc = X86::JB_4; break; | |
| case CmpInst::FCMP_ULE: SwapArgs = false; BranchOpc = X86::JBE_4; break; | |
| case CmpInst::ICMP_EQ: SwapArgs = false; BranchOpc = X86::JE_4; break; | |
| case CmpInst::ICMP_NE: SwapArgs = false; BranchOpc = X86::JNE_4; break; | |
| case CmpInst::ICMP_UGT: SwapArgs = false; BranchOpc = X86::JA_4; break; | |
| case CmpInst::ICMP_UGE: SwapArgs = false; BranchOpc = X86::JAE_4; break; | |
| case CmpInst::ICMP_ULT: SwapArgs = false; BranchOpc = X86::JB_4; break; | |
| case CmpInst::ICMP_ULE: SwapArgs = false; BranchOpc = X86::JBE_4; break; | |
| case CmpInst::ICMP_SGT: SwapArgs = false; BranchOpc = X86::JG_4; break; | |
| case CmpInst::ICMP_SGE: SwapArgs = false; BranchOpc = X86::JGE_4; break; | |
| case CmpInst::ICMP_SLT: SwapArgs = false; BranchOpc = X86::JL_4; break; | |
| case CmpInst::ICMP_SLE: SwapArgs = false; BranchOpc = X86::JLE_4; break; | |
| default: | |
| return false; | |
| } | |
| const Value *Op0 = CI->getOperand(0), *Op1 = CI->getOperand(1); | |
| if (SwapArgs) | |
| std::swap(Op0, Op1); | |
| // Emit a compare of the LHS and RHS, setting the flags. | |
| if (!X86FastEmitCompare(Op0, Op1, VT)) | |
| return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(BranchOpc)) | |
| .addMBB(TrueMBB); | |
| if (Predicate == CmpInst::FCMP_UNE) { | |
| // X86 requires a second branch to handle UNE (and OEQ, | |
| // which is mapped to UNE above). | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::JP_4)) | |
| .addMBB(TrueMBB); | |
| } | |
| FastEmitBranch(FalseMBB, DL); | |
| FuncInfo.MBB->addSuccessor(TrueMBB); | |
| return true; | |
| } | |
| } else if (TruncInst *TI = dyn_cast<TruncInst>(BI->getCondition())) { | |
| // Handle things like "%cond = trunc i32 %X to i1 / br i1 %cond", which | |
| // typically happen for _Bool and C++ bools. | |
| MVT SourceVT; | |
| if (TI->hasOneUse() && TI->getParent() == I->getParent() && | |
| isTypeLegal(TI->getOperand(0)->getType(), SourceVT)) { | |
| unsigned TestOpc = 0; | |
| switch (SourceVT.SimpleTy) { | |
| default: break; | |
| case MVT::i8: TestOpc = X86::TEST8ri; break; | |
| case MVT::i16: TestOpc = X86::TEST16ri; break; | |
| case MVT::i32: TestOpc = X86::TEST32ri; break; | |
| case MVT::i64: TestOpc = X86::TEST64ri32; break; | |
| } | |
| if (TestOpc) { | |
| unsigned OpReg = getRegForValue(TI->getOperand(0)); | |
| if (OpReg == 0) return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TestOpc)) | |
| .addReg(OpReg).addImm(1); | |
| unsigned JmpOpc = X86::JNE_4; | |
| if (FuncInfo.MBB->isLayoutSuccessor(TrueMBB)) { | |
| std::swap(TrueMBB, FalseMBB); | |
| JmpOpc = X86::JE_4; | |
| } | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(JmpOpc)) | |
| .addMBB(TrueMBB); | |
| FastEmitBranch(FalseMBB, DL); | |
| FuncInfo.MBB->addSuccessor(TrueMBB); | |
| return true; | |
| } | |
| } | |
| } | |
| // Otherwise do a clumsy setcc and re-test it. | |
| // Note that i1 essentially gets ANY_EXTEND'ed to i8 where it isn't used | |
| // in an explicit cast, so make sure to handle that correctly. | |
| unsigned OpReg = getRegForValue(BI->getCondition()); | |
| if (OpReg == 0) return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::TEST8ri)) | |
| .addReg(OpReg).addImm(1); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::JNE_4)) | |
| .addMBB(TrueMBB); | |
| FastEmitBranch(FalseMBB, DL); | |
| FuncInfo.MBB->addSuccessor(TrueMBB); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectShift(const Instruction *I) { | |
| unsigned CReg = 0, OpReg = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| if (I->getType()->isIntegerTy(8)) { | |
| CReg = X86::CL; | |
| RC = &X86::GR8RegClass; | |
| switch (I->getOpcode()) { | |
| case Instruction::LShr: OpReg = X86::SHR8rCL; break; | |
| case Instruction::AShr: OpReg = X86::SAR8rCL; break; | |
| case Instruction::Shl: OpReg = X86::SHL8rCL; break; | |
| default: return false; | |
| } | |
| } else if (I->getType()->isIntegerTy(16)) { | |
| CReg = X86::CX; | |
| RC = &X86::GR16RegClass; | |
| switch (I->getOpcode()) { | |
| case Instruction::LShr: OpReg = X86::SHR16rCL; break; | |
| case Instruction::AShr: OpReg = X86::SAR16rCL; break; | |
| case Instruction::Shl: OpReg = X86::SHL16rCL; break; | |
| default: return false; | |
| } | |
| } else if (I->getType()->isIntegerTy(32)) { | |
| CReg = X86::ECX; | |
| RC = &X86::GR32RegClass; | |
| switch (I->getOpcode()) { | |
| case Instruction::LShr: OpReg = X86::SHR32rCL; break; | |
| case Instruction::AShr: OpReg = X86::SAR32rCL; break; | |
| case Instruction::Shl: OpReg = X86::SHL32rCL; break; | |
| default: return false; | |
| } | |
| } else if (I->getType()->isIntegerTy(64)) { | |
| CReg = X86::RCX; | |
| RC = &X86::GR64RegClass; | |
| switch (I->getOpcode()) { | |
| case Instruction::LShr: OpReg = X86::SHR64rCL; break; | |
| case Instruction::AShr: OpReg = X86::SAR64rCL; break; | |
| case Instruction::Shl: OpReg = X86::SHL64rCL; break; | |
| default: return false; | |
| } | |
| } else { | |
| return false; | |
| } | |
| MVT VT; | |
| if (!isTypeLegal(I->getType(), VT)) | |
| return false; | |
| unsigned Op0Reg = getRegForValue(I->getOperand(0)); | |
| if (Op0Reg == 0) return false; | |
| unsigned Op1Reg = getRegForValue(I->getOperand(1)); | |
| if (Op1Reg == 0) return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| CReg).addReg(Op1Reg); | |
| // The shift instruction uses X86::CL. If we defined a super-register | |
| // of X86::CL, emit a subreg KILL to precisely describe what we're doing here. | |
| if (CReg != X86::CL) | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(TargetOpcode::KILL), X86::CL) | |
| .addReg(CReg, RegState::Kill); | |
| unsigned ResultReg = createResultReg(RC); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(OpReg), ResultReg) | |
| .addReg(Op0Reg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectSelect(const Instruction *I) { | |
| MVT VT; | |
| if (!isTypeLegal(I->getType(), VT)) | |
| return false; | |
| // We only use cmov here, if we don't have a cmov instruction bail. | |
| if (!Subtarget->hasCMov()) return false; | |
| unsigned Opc = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| if (VT == MVT::i16) { | |
| Opc = X86::CMOVE16rr; | |
| RC = &X86::GR16RegClass; | |
| } else if (VT == MVT::i32) { | |
| Opc = X86::CMOVE32rr; | |
| RC = &X86::GR32RegClass; | |
| } else if (VT == MVT::i64) { | |
| Opc = X86::CMOVE64rr; | |
| RC = &X86::GR64RegClass; | |
| } else { | |
| return false; | |
| } | |
| unsigned Op0Reg = getRegForValue(I->getOperand(0)); | |
| if (Op0Reg == 0) return false; | |
| unsigned Op1Reg = getRegForValue(I->getOperand(1)); | |
| if (Op1Reg == 0) return false; | |
| unsigned Op2Reg = getRegForValue(I->getOperand(2)); | |
| if (Op2Reg == 0) return false; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::TEST8rr)) | |
| .addReg(Op0Reg).addReg(Op0Reg); | |
| unsigned ResultReg = createResultReg(RC); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(Opc), ResultReg) | |
| .addReg(Op1Reg).addReg(Op2Reg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| bool X86FastISel::X86SelectFPExt(const Instruction *I) { | |
| // fpext from float to double. | |
| if (X86ScalarSSEf64 && | |
| I->getType()->isDoubleTy()) { | |
| const Value *V = I->getOperand(0); | |
| if (V->getType()->isFloatTy()) { | |
| unsigned OpReg = getRegForValue(V); | |
| if (OpReg == 0) return false; | |
| unsigned ResultReg = createResultReg(X86::FR64RegisterClass); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(X86::CVTSS2SDrr), ResultReg) | |
| .addReg(OpReg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| bool X86FastISel::X86SelectFPTrunc(const Instruction *I) { | |
| if (X86ScalarSSEf64) { | |
| if (I->getType()->isFloatTy()) { | |
| const Value *V = I->getOperand(0); | |
| if (V->getType()->isDoubleTy()) { | |
| unsigned OpReg = getRegForValue(V); | |
| if (OpReg == 0) return false; | |
| unsigned ResultReg = createResultReg(X86::FR32RegisterClass); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(X86::CVTSD2SSrr), ResultReg) | |
| .addReg(OpReg); | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| } | |
| } | |
| return false; | |
| } | |
| bool X86FastISel::X86SelectTrunc(const Instruction *I) { | |
| EVT SrcVT = TLI.getValueType(I->getOperand(0)->getType()); | |
| EVT DstVT = TLI.getValueType(I->getType()); | |
| // This code only handles truncation to byte. | |
| if (DstVT != MVT::i8 && DstVT != MVT::i1) | |
| return false; | |
| if (!TLI.isTypeLegal(SrcVT)) | |
| return false; | |
| unsigned InputReg = getRegForValue(I->getOperand(0)); | |
| if (!InputReg) | |
| // Unhandled operand. Halt "fast" selection and bail. | |
| return false; | |
| if (SrcVT == MVT::i8) { | |
| // Truncate from i8 to i1; no code needed. | |
| UpdateValueMap(I, InputReg); | |
| return true; | |
| } | |
| if (!Subtarget->is64Bit()) { | |
| // If we're on x86-32; we can't extract an i8 from a general register. | |
| // First issue a copy to GR16_ABCD or GR32_ABCD. | |
| const TargetRegisterClass *CopyRC = (SrcVT == MVT::i16) | |
| ? X86::GR16_ABCDRegisterClass : X86::GR32_ABCDRegisterClass; | |
| unsigned CopyReg = createResultReg(CopyRC); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| CopyReg).addReg(InputReg); | |
| InputReg = CopyReg; | |
| } | |
| // Issue an extract_subreg. | |
| unsigned ResultReg = FastEmitInst_extractsubreg(MVT::i8, | |
| InputReg, /*Kill=*/true, | |
| X86::sub_8bit); | |
| if (!ResultReg) | |
| return false; | |
| UpdateValueMap(I, ResultReg); | |
| return true; | |
| } | |
| bool X86FastISel::IsMemcpySmall(uint64_t Len) { | |
| return Len <= (Subtarget->is64Bit() ? 32 : 16); | |
| } | |
| bool X86FastISel::TryEmitSmallMemcpy(X86AddressMode DestAM, | |
| X86AddressMode SrcAM, uint64_t Len) { | |
| // Make sure we don't bloat code by inlining very large memcpy's. | |
| if (!IsMemcpySmall(Len)) | |
| return false; | |
| bool i64Legal = Subtarget->is64Bit(); | |
| // We don't care about alignment here since we just emit integer accesses. | |
| while (Len) { | |
| MVT VT; | |
| if (Len >= 8 && i64Legal) | |
| VT = MVT::i64; | |
| else if (Len >= 4) | |
| VT = MVT::i32; | |
| else if (Len >= 2) | |
| VT = MVT::i16; | |
| else { | |
| assert(Len == 1); | |
| VT = MVT::i8; | |
| } | |
| unsigned Reg; | |
| bool RV = X86FastEmitLoad(VT, SrcAM, Reg); | |
| RV &= X86FastEmitStore(VT, Reg, DestAM); | |
| assert(RV && "Failed to emit load or store??"); | |
| unsigned Size = VT.getSizeInBits()/8; | |
| Len -= Size; | |
| DestAM.Disp += Size; | |
| SrcAM.Disp += Size; | |
| } | |
| return true; | |
| } | |
| bool X86FastISel::X86VisitIntrinsicCall(const IntrinsicInst &I) { | |
| // FIXME: Handle more intrinsics. | |
| switch (I.getIntrinsicID()) { | |
| default: return false; | |
| case Intrinsic::memcpy: { | |
| const MemCpyInst &MCI = cast<MemCpyInst>(I); | |
| // Don't handle volatile or variable length memcpys. | |
| if (MCI.isVolatile()) | |
| return false; | |
| if (isa<ConstantInt>(MCI.getLength())) { | |
| // Small memcpy's are common enough that we want to do them | |
| // without a call if possible. | |
| uint64_t Len = cast<ConstantInt>(MCI.getLength())->getZExtValue(); | |
| if (IsMemcpySmall(Len)) { | |
| X86AddressMode DestAM, SrcAM; | |
| if (!X86SelectAddress(MCI.getRawDest(), DestAM) || | |
| !X86SelectAddress(MCI.getRawSource(), SrcAM)) | |
| return false; | |
| TryEmitSmallMemcpy(DestAM, SrcAM, Len); | |
| return true; | |
| } | |
| } | |
| unsigned SizeWidth = Subtarget->is64Bit() ? 64 : 32; | |
| if (!MCI.getLength()->getType()->isIntegerTy(SizeWidth)) | |
| return false; | |
| if (MCI.getSourceAddressSpace() > 255 || MCI.getDestAddressSpace() > 255) | |
| return false; | |
| return DoSelectCall(&I, "memcpy"); | |
| } | |
| case Intrinsic::memset: { | |
| const MemSetInst &MSI = cast<MemSetInst>(I); | |
| if (MSI.isVolatile()) | |
| return false; | |
| unsigned SizeWidth = Subtarget->is64Bit() ? 64 : 32; | |
| if (!MSI.getLength()->getType()->isIntegerTy(SizeWidth)) | |
| return false; | |
| if (MSI.getDestAddressSpace() > 255) | |
| return false; | |
| return DoSelectCall(&I, "memset"); | |
| } | |
| case Intrinsic::stackprotector: { | |
| // Emit code inline code to store the stack guard onto the stack. | |
| EVT PtrTy = TLI.getPointerTy(); | |
| const Value *Op1 = I.getArgOperand(0); // The guard's value. | |
| const AllocaInst *Slot = cast<AllocaInst>(I.getArgOperand(1)); | |
| // Grab the frame index. | |
| X86AddressMode AM; | |
| if (!X86SelectAddress(Slot, AM)) return false; | |
| if (!X86FastEmitStore(PtrTy, Op1, AM)) return false; | |
| return true; | |
| } | |
| case Intrinsic::dbg_declare: { | |
| const DbgDeclareInst *DI = cast<DbgDeclareInst>(&I); | |
| X86AddressMode AM; | |
| assert(DI->getAddress() && "Null address should be checked earlier!"); | |
| if (!X86SelectAddress(DI->getAddress(), AM)) | |
| return false; | |
| const MCInstrDesc &II = TII.get(TargetOpcode::DBG_VALUE); | |
| // FIXME may need to add RegState::Debug to any registers produced, | |
| // although ESP/EBP should be the only ones at the moment. | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, II), AM). | |
| addImm(0).addMetadata(DI->getVariable()); | |
| return true; | |
| } | |
| case Intrinsic::trap: { | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::TRAP)); | |
| return true; | |
| } | |
| case Intrinsic::sadd_with_overflow: | |
| case Intrinsic::uadd_with_overflow: { | |
| // FIXME: Should fold immediates. | |
| // Replace "add with overflow" intrinsics with an "add" instruction followed | |
| // by a seto/setc instruction. | |
| const Function *Callee = I.getCalledFunction(); | |
| Type *RetTy = | |
| cast<StructType>(Callee->getReturnType())->getTypeAtIndex(unsigned(0)); | |
| MVT VT; | |
| if (!isTypeLegal(RetTy, VT)) | |
| return false; | |
| const Value *Op1 = I.getArgOperand(0); | |
| const Value *Op2 = I.getArgOperand(1); | |
| unsigned Reg1 = getRegForValue(Op1); | |
| unsigned Reg2 = getRegForValue(Op2); | |
| if (Reg1 == 0 || Reg2 == 0) | |
| // FIXME: Handle values *not* in registers. | |
| return false; | |
| unsigned OpC = 0; | |
| if (VT == MVT::i32) | |
| OpC = X86::ADD32rr; | |
| else if (VT == MVT::i64) | |
| OpC = X86::ADD64rr; | |
| else | |
| return false; | |
| // The call to CreateRegs builds two sequential registers, to store the | |
| // both the the returned values. | |
| unsigned ResultReg = FuncInfo.CreateRegs(I.getType()); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(OpC), ResultReg) | |
| .addReg(Reg1).addReg(Reg2); | |
| unsigned Opc = X86::SETBr; | |
| if (I.getIntrinsicID() == Intrinsic::sadd_with_overflow) | |
| Opc = X86::SETOr; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(Opc), ResultReg+1); | |
| UpdateValueMap(&I, ResultReg, 2); | |
| return true; | |
| } | |
| } | |
| } | |
| bool X86FastISel::X86SelectCall(const Instruction *I) { | |
| const CallInst *CI = cast<CallInst>(I); | |
| const Value *Callee = CI->getCalledValue(); | |
| // Can't handle inline asm yet. | |
| if (isa<InlineAsm>(Callee)) | |
| return false; | |
| // Handle intrinsic calls. | |
| if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(CI)) | |
| return X86VisitIntrinsicCall(*II); | |
| return DoSelectCall(I, 0); | |
| } | |
| // Select either a call, or an llvm.memcpy/memmove/memset intrinsic | |
| bool X86FastISel::DoSelectCall(const Instruction *I, const char *MemIntName) { | |
| const CallInst *CI = cast<CallInst>(I); | |
| const Value *Callee = CI->getCalledValue(); | |
| // Handle only C and fastcc calling conventions for now. | |
| ImmutableCallSite CS(CI); | |
| CallingConv::ID CC = CS.getCallingConv(); | |
| if (CC != CallingConv::C && CC != CallingConv::Fast && | |
| CC != CallingConv::X86_FastCall) | |
| return false; | |
| // fastcc with -tailcallopt is intended to provide a guaranteed | |
| // tail call optimization. Fastisel doesn't know how to do that. | |
| if (CC == CallingConv::Fast && GuaranteedTailCallOpt) | |
| return false; | |
| PointerType *PT = cast<PointerType>(CS.getCalledValue()->getType()); | |
| FunctionType *FTy = cast<FunctionType>(PT->getElementType()); | |
| bool isVarArg = FTy->isVarArg(); | |
| // Don't know how to handle Win64 varargs yet. Nothing special needed for | |
| // x86-32. Special handling for x86-64 is implemented. | |
| if (isVarArg && Subtarget->isTargetWin64()) | |
| return false; | |
| // Fast-isel doesn't know about callee-pop yet. | |
| if (X86::isCalleePop(CC, Subtarget->is64Bit(), isVarArg, | |
| GuaranteedTailCallOpt)) | |
| return false; | |
| // Check whether the function can return without sret-demotion. | |
| SmallVector<ISD::OutputArg, 4> Outs; | |
| SmallVector<uint64_t, 4> Offsets; | |
| GetReturnInfo(I->getType(), CS.getAttributes().getRetAttributes(), | |
| Outs, TLI, &Offsets); | |
| bool CanLowerReturn = TLI.CanLowerReturn(CS.getCallingConv(), | |
| *FuncInfo.MF, FTy->isVarArg(), | |
| Outs, FTy->getContext()); | |
| if (!CanLowerReturn) | |
| return false; | |
| // Materialize callee address in a register. FIXME: GV address can be | |
| // handled with a CALLpcrel32 instead. | |
| X86AddressMode CalleeAM; | |
| if (!X86SelectCallAddress(Callee, CalleeAM)) | |
| return false; | |
| unsigned CalleeOp = 0; | |
| const GlobalValue *GV = 0; | |
| if (CalleeAM.GV != 0) { | |
| GV = CalleeAM.GV; | |
| } else if (CalleeAM.Base.Reg != 0) { | |
| CalleeOp = CalleeAM.Base.Reg; | |
| } else | |
| return false; | |
| // Deal with call operands first. | |
| SmallVector<const Value *, 8> ArgVals; | |
| SmallVector<unsigned, 8> Args; | |
| SmallVector<MVT, 8> ArgVTs; | |
| SmallVector<ISD::ArgFlagsTy, 8> ArgFlags; | |
| Args.reserve(CS.arg_size()); | |
| ArgVals.reserve(CS.arg_size()); | |
| ArgVTs.reserve(CS.arg_size()); | |
| ArgFlags.reserve(CS.arg_size()); | |
| for (ImmutableCallSite::arg_iterator i = CS.arg_begin(), e = CS.arg_end(); | |
| i != e; ++i) { | |
| // If we're lowering a mem intrinsic instead of a regular call, skip the | |
| // last two arguments, which should not passed to the underlying functions. | |
| if (MemIntName && e-i <= 2) | |
| break; | |
| Value *ArgVal = *i; | |
| ISD::ArgFlagsTy Flags; | |
| unsigned AttrInd = i - CS.arg_begin() + 1; | |
| if (CS.paramHasAttr(AttrInd, Attribute::SExt)) | |
| Flags.setSExt(); | |
| if (CS.paramHasAttr(AttrInd, Attribute::ZExt)) | |
| Flags.setZExt(); | |
| if (CS.paramHasAttr(AttrInd, Attribute::ByVal)) { | |
| PointerType *Ty = cast<PointerType>(ArgVal->getType()); | |
| Type *ElementTy = Ty->getElementType(); | |
| unsigned FrameSize = TD.getTypeAllocSize(ElementTy); | |
| unsigned FrameAlign = CS.getParamAlignment(AttrInd); | |
| if (!FrameAlign) | |
| FrameAlign = TLI.getByValTypeAlignment(ElementTy); | |
| Flags.setByVal(); | |
| Flags.setByValSize(FrameSize); | |
| Flags.setByValAlign(FrameAlign); | |
| if (!IsMemcpySmall(FrameSize)) | |
| return false; | |
| } | |
| if (CS.paramHasAttr(AttrInd, Attribute::InReg)) | |
| Flags.setInReg(); | |
| if (CS.paramHasAttr(AttrInd, Attribute::Nest)) | |
| Flags.setNest(); | |
| // If this is an i1/i8/i16 argument, promote to i32 to avoid an extra | |
| // instruction. This is safe because it is common to all fastisel supported | |
| // calling conventions on x86. | |
| if (ConstantInt *CI = dyn_cast<ConstantInt>(ArgVal)) { | |
| if (CI->getBitWidth() == 1 || CI->getBitWidth() == 8 || | |
| CI->getBitWidth() == 16) { | |
| if (Flags.isSExt()) | |
| ArgVal = ConstantExpr::getSExt(CI,Type::getInt32Ty(CI->getContext())); | |
| else | |
| ArgVal = ConstantExpr::getZExt(CI,Type::getInt32Ty(CI->getContext())); | |
| } | |
| } | |
| unsigned ArgReg; | |
| // Passing bools around ends up doing a trunc to i1 and passing it. | |
| // Codegen this as an argument + "and 1". | |
| if (ArgVal->getType()->isIntegerTy(1) && isa<TruncInst>(ArgVal) && | |
| cast<TruncInst>(ArgVal)->getParent() == I->getParent() && | |
| ArgVal->hasOneUse()) { | |
| ArgVal = cast<TruncInst>(ArgVal)->getOperand(0); | |
| ArgReg = getRegForValue(ArgVal); | |
| if (ArgReg == 0) return false; | |
| MVT ArgVT; | |
| if (!isTypeLegal(ArgVal->getType(), ArgVT)) return false; | |
| ArgReg = FastEmit_ri(ArgVT, ArgVT, ISD::AND, ArgReg, | |
| ArgVal->hasOneUse(), 1); | |
| } else { | |
| ArgReg = getRegForValue(ArgVal); | |
| } | |
| if (ArgReg == 0) return false; | |
| Type *ArgTy = ArgVal->getType(); | |
| MVT ArgVT; | |
| if (!isTypeLegal(ArgTy, ArgVT)) | |
| return false; | |
| if (ArgVT == MVT::x86mmx) | |
| return false; | |
| unsigned OriginalAlignment = TD.getABITypeAlignment(ArgTy); | |
| Flags.setOrigAlign(OriginalAlignment); | |
| Args.push_back(ArgReg); | |
| ArgVals.push_back(ArgVal); | |
| ArgVTs.push_back(ArgVT); | |
| ArgFlags.push_back(Flags); | |
| } | |
| // Analyze operands of the call, assigning locations to each operand. | |
| SmallVector<CCValAssign, 16> ArgLocs; | |
| CCState CCInfo(CC, isVarArg, *FuncInfo.MF, TM, ArgLocs, | |
| I->getParent()->getContext()); | |
| // Allocate shadow area for Win64 | |
| if (Subtarget->isTargetWin64()) | |
| CCInfo.AllocateStack(32, 8); | |
| CCInfo.AnalyzeCallOperands(ArgVTs, ArgFlags, CC_X86); | |
| // Get a count of how many bytes are to be pushed on the stack. | |
| unsigned NumBytes = CCInfo.getNextStackOffset(); | |
| // Issue CALLSEQ_START | |
| unsigned AdjStackDown = TII.getCallFrameSetupOpcode(); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(AdjStackDown)) | |
| .addImm(NumBytes); | |
| // Process argument: walk the register/memloc assignments, inserting | |
| // copies / loads. | |
| SmallVector<unsigned, 4> RegArgs; | |
| for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) { | |
| CCValAssign &VA = ArgLocs[i]; | |
| unsigned Arg = Args[VA.getValNo()]; | |
| EVT ArgVT = ArgVTs[VA.getValNo()]; | |
| // Promote the value if needed. | |
| switch (VA.getLocInfo()) { | |
| default: llvm_unreachable("Unknown loc info!"); | |
| case CCValAssign::Full: break; | |
| case CCValAssign::SExt: { | |
| assert(VA.getLocVT().isInteger() && !VA.getLocVT().isVector() && | |
| "Unexpected extend"); | |
| bool Emitted = X86FastEmitExtend(ISD::SIGN_EXTEND, VA.getLocVT(), | |
| Arg, ArgVT, Arg); | |
| assert(Emitted && "Failed to emit a sext!"); (void)Emitted; | |
| ArgVT = VA.getLocVT(); | |
| break; | |
| } | |
| case CCValAssign::ZExt: { | |
| assert(VA.getLocVT().isInteger() && !VA.getLocVT().isVector() && | |
| "Unexpected extend"); | |
| bool Emitted = X86FastEmitExtend(ISD::ZERO_EXTEND, VA.getLocVT(), | |
| Arg, ArgVT, Arg); | |
| assert(Emitted && "Failed to emit a zext!"); (void)Emitted; | |
| ArgVT = VA.getLocVT(); | |
| break; | |
| } | |
| case CCValAssign::AExt: { | |
| assert(VA.getLocVT().isInteger() && !VA.getLocVT().isVector() && | |
| "Unexpected extend"); | |
| bool Emitted = X86FastEmitExtend(ISD::ANY_EXTEND, VA.getLocVT(), | |
| Arg, ArgVT, Arg); | |
| if (!Emitted) | |
| Emitted = X86FastEmitExtend(ISD::ZERO_EXTEND, VA.getLocVT(), | |
| Arg, ArgVT, Arg); | |
| if (!Emitted) | |
| Emitted = X86FastEmitExtend(ISD::SIGN_EXTEND, VA.getLocVT(), | |
| Arg, ArgVT, Arg); | |
| assert(Emitted && "Failed to emit a aext!"); (void)Emitted; | |
| ArgVT = VA.getLocVT(); | |
| break; | |
| } | |
| case CCValAssign::BCvt: { | |
| unsigned BC = FastEmit_r(ArgVT.getSimpleVT(), VA.getLocVT(), | |
| ISD::BITCAST, Arg, /*TODO: Kill=*/false); | |
| assert(BC != 0 && "Failed to emit a bitcast!"); | |
| Arg = BC; | |
| ArgVT = VA.getLocVT(); | |
| break; | |
| } | |
| } | |
| if (VA.isRegLoc()) { | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| VA.getLocReg()).addReg(Arg); | |
| RegArgs.push_back(VA.getLocReg()); | |
| } else { | |
| unsigned LocMemOffset = VA.getLocMemOffset(); | |
| X86AddressMode AM; | |
| AM.Base.Reg = StackPtr; | |
| AM.Disp = LocMemOffset; | |
| const Value *ArgVal = ArgVals[VA.getValNo()]; | |
| ISD::ArgFlagsTy Flags = ArgFlags[VA.getValNo()]; | |
| if (Flags.isByVal()) { | |
| X86AddressMode SrcAM; | |
| SrcAM.Base.Reg = Arg; | |
| bool Res = TryEmitSmallMemcpy(AM, SrcAM, Flags.getByValSize()); | |
| assert(Res && "memcpy length already checked!"); (void)Res; | |
| } else if (isa<ConstantInt>(ArgVal) || isa<ConstantPointerNull>(ArgVal)) { | |
| // If this is a really simple value, emit this with the Value* version | |
| // of X86FastEmitStore. If it isn't simple, we don't want to do this, | |
| // as it can cause us to reevaluate the argument. | |
| X86FastEmitStore(ArgVT, ArgVal, AM); | |
| } else { | |
| X86FastEmitStore(ArgVT, Arg, AM); | |
| } | |
| } | |
| } | |
| // ELF / PIC requires GOT in the EBX register before function calls via PLT | |
| // GOT pointer. | |
| if (Subtarget->isPICStyleGOT()) { | |
| unsigned Base = getInstrInfo()->getGlobalBaseReg(FuncInfo.MF); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| X86::EBX).addReg(Base); | |
| } | |
| if (Subtarget->is64Bit() && isVarArg && !Subtarget->isTargetWin64()) { | |
| // Count the number of XMM registers allocated. | |
| static const unsigned XMMArgRegs[] = { | |
| X86::XMM0, X86::XMM1, X86::XMM2, X86::XMM3, | |
| X86::XMM4, X86::XMM5, X86::XMM6, X86::XMM7 | |
| }; | |
| unsigned NumXMMRegs = CCInfo.getFirstUnallocated(XMMArgRegs, 8); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::MOV8ri), | |
| X86::AL).addImm(NumXMMRegs); | |
| } | |
| // Issue the call. | |
| MachineInstrBuilder MIB; | |
| if (CalleeOp) { | |
| // Register-indirect call. | |
| unsigned CallOpc; | |
| if (Subtarget->isTargetWin64()) | |
| CallOpc = X86::WINCALL64r; | |
| else if (Subtarget->is64Bit()) | |
| CallOpc = X86::CALL64r; | |
| else | |
| CallOpc = X86::CALL32r; | |
| MIB = BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(CallOpc)) | |
| .addReg(CalleeOp); | |
| } else { | |
| // Direct call. | |
| assert(GV && "Not a direct call"); | |
| unsigned CallOpc; | |
| if (Subtarget->isTargetWin64()) | |
| CallOpc = X86::WINCALL64pcrel32; | |
| else if (Subtarget->is64Bit()) | |
| CallOpc = X86::CALL64pcrel32; | |
| else | |
| CallOpc = X86::CALLpcrel32; | |
| // See if we need any target-specific flags on the GV operand. | |
| unsigned char OpFlags = 0; | |
| // On ELF targets, in both X86-64 and X86-32 mode, direct calls to | |
| // external symbols most go through the PLT in PIC mode. If the symbol | |
| // has hidden or protected visibility, or if it is static or local, then | |
| // we don't need to use the PLT - we can directly call it. | |
| if (Subtarget->isTargetELF() && | |
| TM.getRelocationModel() == Reloc::PIC_ && | |
| GV->hasDefaultVisibility() && !GV->hasLocalLinkage()) { | |
| OpFlags = X86II::MO_PLT; | |
| } else if (Subtarget->isPICStyleStubAny() && | |
| (GV->isDeclaration() || GV->isWeakForLinker()) && | |
| (!Subtarget->getTargetTriple().isMacOSX() || | |
| Subtarget->getTargetTriple().isMacOSXVersionLT(10, 5))) { | |
| // PC-relative references to external symbols should go through $stub, | |
| // unless we're building with the leopard linker or later, which | |
| // automatically synthesizes these stubs. | |
| OpFlags = X86II::MO_DARWIN_STUB; | |
| } | |
| MIB = BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(CallOpc)); | |
| if (MemIntName) | |
| MIB.addExternalSymbol(MemIntName, OpFlags); | |
| else | |
| MIB.addGlobalAddress(GV, 0, OpFlags); | |
| } | |
| // Add an implicit use GOT pointer in EBX. | |
| if (Subtarget->isPICStyleGOT()) | |
| MIB.addReg(X86::EBX); | |
| if (Subtarget->is64Bit() && isVarArg && !Subtarget->isTargetWin64()) | |
| MIB.addReg(X86::AL); | |
| // Add implicit physical register uses to the call. | |
| for (unsigned i = 0, e = RegArgs.size(); i != e; ++i) | |
| MIB.addReg(RegArgs[i]); | |
| // Issue CALLSEQ_END | |
| unsigned AdjStackUp = TII.getCallFrameDestroyOpcode(); | |
| unsigned NumBytesCallee = 0; | |
| if (!Subtarget->is64Bit() && CS.paramHasAttr(1, Attribute::StructRet)) | |
| NumBytesCallee = 4; | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(AdjStackUp)) | |
| .addImm(NumBytes).addImm(NumBytesCallee); | |
| // Build info for return calling conv lowering code. | |
| // FIXME: This is practically a copy-paste from TargetLowering::LowerCallTo. | |
| SmallVector<ISD::InputArg, 32> Ins; | |
| SmallVector<EVT, 4> RetTys; | |
| ComputeValueVTs(TLI, I->getType(), RetTys); | |
| for (unsigned i = 0, e = RetTys.size(); i != e; ++i) { | |
| EVT VT = RetTys[i]; | |
| EVT RegisterVT = TLI.getRegisterType(I->getParent()->getContext(), VT); | |
| unsigned NumRegs = TLI.getNumRegisters(I->getParent()->getContext(), VT); | |
| for (unsigned j = 0; j != NumRegs; ++j) { | |
| ISD::InputArg MyFlags; | |
| MyFlags.VT = RegisterVT.getSimpleVT(); | |
| MyFlags.Used = !CS.getInstruction()->use_empty(); | |
| if (CS.paramHasAttr(0, Attribute::SExt)) | |
| MyFlags.Flags.setSExt(); | |
| if (CS.paramHasAttr(0, Attribute::ZExt)) | |
| MyFlags.Flags.setZExt(); | |
| if (CS.paramHasAttr(0, Attribute::InReg)) | |
| MyFlags.Flags.setInReg(); | |
| Ins.push_back(MyFlags); | |
| } | |
| } | |
| // Now handle call return values. | |
| SmallVector<unsigned, 4> UsedRegs; | |
| SmallVector<CCValAssign, 16> RVLocs; | |
| CCState CCRetInfo(CC, false, *FuncInfo.MF, TM, RVLocs, | |
| I->getParent()->getContext()); | |
| unsigned ResultReg = FuncInfo.CreateRegs(I->getType()); | |
| CCRetInfo.AnalyzeCallResult(Ins, RetCC_X86); | |
| for (unsigned i = 0; i != RVLocs.size(); ++i) { | |
| EVT CopyVT = RVLocs[i].getValVT(); | |
| unsigned CopyReg = ResultReg + i; | |
| // If this is a call to a function that returns an fp value on the x87 fp | |
| // stack, but where we prefer to use the value in xmm registers, copy it | |
| // out as F80 and use a truncate to move it from fp stack reg to xmm reg. | |
| if ((RVLocs[i].getLocReg() == X86::ST0 || | |
| RVLocs[i].getLocReg() == X86::ST1)) { | |
| if (isScalarFPTypeInSSEReg(RVLocs[i].getValVT())) { | |
| CopyVT = MVT::f80; | |
| CopyReg = createResultReg(X86::RFP80RegisterClass); | |
| } | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(X86::FpPOP_RETVAL), | |
| CopyReg); | |
| } else { | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(TargetOpcode::COPY), | |
| CopyReg).addReg(RVLocs[i].getLocReg()); | |
| UsedRegs.push_back(RVLocs[i].getLocReg()); | |
| } | |
| if (CopyVT != RVLocs[i].getValVT()) { | |
| // Round the F80 the right size, which also moves to the appropriate xmm | |
| // register. This is accomplished by storing the F80 value in memory and | |
| // then loading it back. Ewww... | |
| EVT ResVT = RVLocs[i].getValVT(); | |
| unsigned Opc = ResVT == MVT::f32 ? X86::ST_Fp80m32 : X86::ST_Fp80m64; | |
| unsigned MemSize = ResVT.getSizeInBits()/8; | |
| int FI = MFI.CreateStackObject(MemSize, MemSize, false); | |
| addFrameReference(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(Opc)), FI) | |
| .addReg(CopyReg); | |
| Opc = ResVT == MVT::f32 ? X86::MOVSSrm : X86::MOVSDrm; | |
| addFrameReference(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(Opc), ResultReg + i), FI); | |
| } | |
| } | |
| if (RVLocs.size()) | |
| UpdateValueMap(I, ResultReg, RVLocs.size()); | |
| // Set all unused physreg defs as dead. | |
| static_cast<MachineInstr *>(MIB)->setPhysRegsDeadExcept(UsedRegs, TRI); | |
| return true; | |
| } | |
| bool | |
| X86FastISel::TargetSelectInstruction(const Instruction *I) { | |
| switch (I->getOpcode()) { | |
| default: break; | |
| case Instruction::Load: | |
| return X86SelectLoad(I); | |
| case Instruction::Store: | |
| return X86SelectStore(I); | |
| case Instruction::Ret: | |
| return X86SelectRet(I); | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| return X86SelectCmp(I); | |
| case Instruction::ZExt: | |
| return X86SelectZExt(I); | |
| case Instruction::Br: | |
| return X86SelectBranch(I); | |
| case Instruction::Call: | |
| return X86SelectCall(I); | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::Shl: | |
| return X86SelectShift(I); | |
| case Instruction::Select: | |
| return X86SelectSelect(I); | |
| case Instruction::Trunc: | |
| return X86SelectTrunc(I); | |
| case Instruction::FPExt: | |
| return X86SelectFPExt(I); | |
| case Instruction::FPTrunc: | |
| return X86SelectFPTrunc(I); | |
| case Instruction::IntToPtr: // Deliberate fall-through. | |
| case Instruction::PtrToInt: { | |
| EVT SrcVT = TLI.getValueType(I->getOperand(0)->getType()); | |
| EVT DstVT = TLI.getValueType(I->getType()); | |
| if (DstVT.bitsGT(SrcVT)) | |
| return X86SelectZExt(I); | |
| if (DstVT.bitsLT(SrcVT)) | |
| return X86SelectTrunc(I); | |
| unsigned Reg = getRegForValue(I->getOperand(0)); | |
| if (Reg == 0) return false; | |
| UpdateValueMap(I, Reg); | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| unsigned X86FastISel::TargetMaterializeConstant(const Constant *C) { | |
| MVT VT; | |
| if (!isTypeLegal(C->getType(), VT)) | |
| return false; | |
| // Get opcode and regclass of the output for the given load instruction. | |
| unsigned Opc = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| switch (VT.SimpleTy) { | |
| default: return false; | |
| case MVT::i8: | |
| Opc = X86::MOV8rm; | |
| RC = X86::GR8RegisterClass; | |
| break; | |
| case MVT::i16: | |
| Opc = X86::MOV16rm; | |
| RC = X86::GR16RegisterClass; | |
| break; | |
| case MVT::i32: | |
| Opc = X86::MOV32rm; | |
| RC = X86::GR32RegisterClass; | |
| break; | |
| case MVT::i64: | |
| // Must be in x86-64 mode. | |
| Opc = X86::MOV64rm; | |
| RC = X86::GR64RegisterClass; | |
| break; | |
| case MVT::f32: | |
| if (X86ScalarSSEf32) { | |
| Opc = Subtarget->hasAVX() ? X86::VMOVSSrm : X86::MOVSSrm; | |
| RC = X86::FR32RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp32m; | |
| RC = X86::RFP32RegisterClass; | |
| } | |
| break; | |
| case MVT::f64: | |
| if (X86ScalarSSEf64) { | |
| Opc = Subtarget->hasAVX() ? X86::VMOVSDrm : X86::MOVSDrm; | |
| RC = X86::FR64RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp64m; | |
| RC = X86::RFP64RegisterClass; | |
| } | |
| break; | |
| case MVT::f80: | |
| // No f80 support yet. | |
| return false; | |
| } | |
| // Materialize addresses with LEA instructions. | |
| if (isa<GlobalValue>(C)) { | |
| X86AddressMode AM; | |
| if (X86SelectAddress(C, AM)) { | |
| // If the expression is just a basereg, then we're done, otherwise we need | |
| // to emit an LEA. | |
| if (AM.BaseType == X86AddressMode::RegBase && | |
| AM.IndexReg == 0 && AM.Disp == 0 && AM.GV == 0) | |
| return AM.Base.Reg; | |
| Opc = TLI.getPointerTy() == MVT::i32 ? X86::LEA32r : X86::LEA64r; | |
| unsigned ResultReg = createResultReg(RC); | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(Opc), ResultReg), AM); | |
| return ResultReg; | |
| } | |
| return 0; | |
| } | |
| // MachineConstantPool wants an explicit alignment. | |
| unsigned Align = TD.getPrefTypeAlignment(C->getType()); | |
| if (Align == 0) { | |
| // Alignment of vector types. FIXME! | |
| Align = TD.getTypeAllocSize(C->getType()); | |
| } | |
| // x86-32 PIC requires a PIC base register for constant pools. | |
| unsigned PICBase = 0; | |
| unsigned char OpFlag = 0; | |
| if (Subtarget->isPICStyleStubPIC()) { // Not dynamic-no-pic | |
| OpFlag = X86II::MO_PIC_BASE_OFFSET; | |
| PICBase = getInstrInfo()->getGlobalBaseReg(FuncInfo.MF); | |
| } else if (Subtarget->isPICStyleGOT()) { | |
| OpFlag = X86II::MO_GOTOFF; | |
| PICBase = getInstrInfo()->getGlobalBaseReg(FuncInfo.MF); | |
| } else if (Subtarget->isPICStyleRIPRel() && | |
| TM.getCodeModel() == CodeModel::Small) { | |
| PICBase = X86::RIP; | |
| } | |
| // Create the load from the constant pool. | |
| unsigned MCPOffset = MCP.getConstantPoolIndex(C, Align); | |
| unsigned ResultReg = createResultReg(RC); | |
| addConstantPoolReference(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(Opc), ResultReg), | |
| MCPOffset, PICBase, OpFlag); | |
| return ResultReg; | |
| } | |
| unsigned X86FastISel::TargetMaterializeAlloca(const AllocaInst *C) { | |
| // Fail on dynamic allocas. At this point, getRegForValue has already | |
| // checked its CSE maps, so if we're here trying to handle a dynamic | |
| // alloca, we're not going to succeed. X86SelectAddress has a | |
| // check for dynamic allocas, because it's called directly from | |
| // various places, but TargetMaterializeAlloca also needs a check | |
| // in order to avoid recursion between getRegForValue, | |
| // X86SelectAddrss, and TargetMaterializeAlloca. | |
| if (!FuncInfo.StaticAllocaMap.count(C)) | |
| return 0; | |
| X86AddressMode AM; | |
| if (!X86SelectAddress(C, AM)) | |
| return 0; | |
| unsigned Opc = Subtarget->is64Bit() ? X86::LEA64r : X86::LEA32r; | |
| TargetRegisterClass* RC = TLI.getRegClassFor(TLI.getPointerTy()); | |
| unsigned ResultReg = createResultReg(RC); | |
| addFullAddress(BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, | |
| TII.get(Opc), ResultReg), AM); | |
| return ResultReg; | |
| } | |
| unsigned X86FastISel::TargetMaterializeFloatZero(const ConstantFP *CF) { | |
| MVT VT; | |
| if (!isTypeLegal(CF->getType(), VT)) | |
| return false; | |
| // Get opcode and regclass for the given zero. | |
| unsigned Opc = 0; | |
| const TargetRegisterClass *RC = NULL; | |
| switch (VT.SimpleTy) { | |
| default: return false; | |
| case MVT::f32: | |
| if (X86ScalarSSEf32) { | |
| Opc = X86::FsFLD0SS; | |
| RC = X86::FR32RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp032; | |
| RC = X86::RFP32RegisterClass; | |
| } | |
| break; | |
| case MVT::f64: | |
| if (X86ScalarSSEf64) { | |
| Opc = X86::FsFLD0SD; | |
| RC = X86::FR64RegisterClass; | |
| } else { | |
| Opc = X86::LD_Fp064; | |
| RC = X86::RFP64RegisterClass; | |
| } | |
| break; | |
| case MVT::f80: | |
| // No f80 support yet. | |
| return false; | |
| } | |
| unsigned ResultReg = createResultReg(RC); | |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DL, TII.get(Opc), ResultReg); | |
| return ResultReg; | |
| } | |
| /// TryToFoldLoad - The specified machine instr operand is a vreg, and that | |
| /// vreg is being provided by the specified load instruction. If possible, | |
| /// try to fold the load as an operand to the instruction, returning true if | |
| /// possible. | |
| bool X86FastISel::TryToFoldLoad(MachineInstr *MI, unsigned OpNo, | |
| const LoadInst *LI) { | |
| X86AddressMode AM; | |
| if (!X86SelectAddress(LI->getOperand(0), AM)) | |
| return false; | |
| X86InstrInfo &XII = (X86InstrInfo&)TII; | |
| unsigned Size = TD.getTypeAllocSize(LI->getType()); | |
| unsigned Alignment = LI->getAlignment(); | |
| SmallVector<MachineOperand, 8> AddrOps; | |
| AM.getFullAddress(AddrOps); | |
| MachineInstr *Result = | |
| XII.foldMemoryOperandImpl(*FuncInfo.MF, MI, OpNo, AddrOps, Size, Alignment); | |
| if (Result == 0) return false; | |
| FuncInfo.MBB->insert(FuncInfo.InsertPt, Result); | |
| MI->eraseFromParent(); | |
| return true; | |
| } | |
| namespace llvm { | |
| llvm::FastISel *X86::createFastISel(FunctionLoweringInfo &funcInfo) { | |
| return new X86FastISel(funcInfo); | |
| } | |
| } |