| //===- ARMInstrThumb.td - Thumb support for ARM ------------*- tablegen -*-===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file describes the Thumb instruction set. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| //===----------------------------------------------------------------------===// | |
| // Thumb specific DAG Nodes. | |
| // | |
| def ARMtcall : SDNode<"ARMISD::tCALL", SDT_ARMcall, | |
| [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue, | |
| SDNPVariadic]>; | |
| def imm_sr_XFORM: SDNodeXForm<imm, [{ | |
| unsigned Imm = N->getZExtValue(); | |
| return CurDAG->getTargetConstant((Imm == 32 ? 0 : Imm), MVT::i32); | |
| }]>; | |
| def ThumbSRImmAsmOperand: AsmOperandClass { let Name = "ImmThumbSR"; } | |
| def imm_sr : Operand<i32>, PatLeaf<(imm), [{ | |
| uint64_t Imm = N->getZExtValue(); | |
| return Imm > 0 && Imm <= 32; | |
| }], imm_sr_XFORM> { | |
| let PrintMethod = "printThumbSRImm"; | |
| let ParserMatchClass = ThumbSRImmAsmOperand; | |
| } | |
| def imm_neg_XFORM : SDNodeXForm<imm, [{ | |
| return CurDAG->getTargetConstant(-(int)N->getZExtValue(), MVT::i32); | |
| }]>; | |
| def imm_comp_XFORM : SDNodeXForm<imm, [{ | |
| return CurDAG->getTargetConstant(~((uint32_t)N->getZExtValue()), MVT::i32); | |
| }]>; | |
| def imm0_7_neg : PatLeaf<(i32 imm), [{ | |
| return (uint32_t)-N->getZExtValue() < 8; | |
| }], imm_neg_XFORM>; | |
| def imm0_255_comp : PatLeaf<(i32 imm), [{ | |
| return ~((uint32_t)N->getZExtValue()) < 256; | |
| }]>; | |
| def imm8_255 : ImmLeaf<i32, [{ | |
| return Imm >= 8 && Imm < 256; | |
| }]>; | |
| def imm8_255_neg : PatLeaf<(i32 imm), [{ | |
| unsigned Val = -N->getZExtValue(); | |
| return Val >= 8 && Val < 256; | |
| }], imm_neg_XFORM>; | |
| // Break imm's up into two pieces: an immediate + a left shift. This uses | |
| // thumb_immshifted to match and thumb_immshifted_val and thumb_immshifted_shamt | |
| // to get the val/shift pieces. | |
| def thumb_immshifted : PatLeaf<(imm), [{ | |
| return ARM_AM::isThumbImmShiftedVal((unsigned)N->getZExtValue()); | |
| }]>; | |
| def thumb_immshifted_val : SDNodeXForm<imm, [{ | |
| unsigned V = ARM_AM::getThumbImmNonShiftedVal((unsigned)N->getZExtValue()); | |
| return CurDAG->getTargetConstant(V, MVT::i32); | |
| }]>; | |
| def thumb_immshifted_shamt : SDNodeXForm<imm, [{ | |
| unsigned V = ARM_AM::getThumbImmValShift((unsigned)N->getZExtValue()); | |
| return CurDAG->getTargetConstant(V, MVT::i32); | |
| }]>; | |
| // ADR instruction labels. | |
| def t_adrlabel : Operand<i32> { | |
| let EncoderMethod = "getThumbAdrLabelOpValue"; | |
| } | |
| // Scaled 4 immediate. | |
| def t_imm0_1020s4_asmoperand: AsmOperandClass { let Name = "Imm0_1020s4"; } | |
| def t_imm0_1020s4 : Operand<i32> { | |
| let PrintMethod = "printThumbS4ImmOperand"; | |
| let ParserMatchClass = t_imm0_1020s4_asmoperand; | |
| let OperandType = "OPERAND_IMMEDIATE"; | |
| } | |
| def t_imm0_508s4_asmoperand: AsmOperandClass { let Name = "Imm0_508s4"; } | |
| def t_imm0_508s4 : Operand<i32> { | |
| let PrintMethod = "printThumbS4ImmOperand"; | |
| let ParserMatchClass = t_imm0_508s4_asmoperand; | |
| let OperandType = "OPERAND_IMMEDIATE"; | |
| } | |
| // Define Thumb specific addressing modes. | |
| let OperandType = "OPERAND_PCREL" in { | |
| def t_brtarget : Operand<OtherVT> { | |
| let EncoderMethod = "getThumbBRTargetOpValue"; | |
| let DecoderMethod = "DecodeThumbBROperand"; | |
| } | |
| def t_bcctarget : Operand<i32> { | |
| let EncoderMethod = "getThumbBCCTargetOpValue"; | |
| let DecoderMethod = "DecodeThumbBCCTargetOperand"; | |
| } | |
| def t_cbtarget : Operand<i32> { | |
| let EncoderMethod = "getThumbCBTargetOpValue"; | |
| let DecoderMethod = "DecodeThumbCmpBROperand"; | |
| } | |
| def t_bltarget : Operand<i32> { | |
| let EncoderMethod = "getThumbBLTargetOpValue"; | |
| let DecoderMethod = "DecodeThumbBLTargetOperand"; | |
| } | |
| def t_blxtarget : Operand<i32> { | |
| let EncoderMethod = "getThumbBLXTargetOpValue"; | |
| let DecoderMethod = "DecodeThumbBLXOffset"; | |
| } | |
| } | |
| // t_addrmode_rr := reg + reg | |
| // | |
| def t_addrmode_rr_asm_operand : AsmOperandClass { let Name = "MemThumbRR"; } | |
| def t_addrmode_rr : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeRR", []> { | |
| let EncoderMethod = "getThumbAddrModeRegRegOpValue"; | |
| let PrintMethod = "printThumbAddrModeRROperand"; | |
| let DecoderMethod = "DecodeThumbAddrModeRR"; | |
| let ParserMatchClass = t_addrmode_rr_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, tGPR:$offsreg); | |
| } | |
| // t_addrmode_rrs := reg + reg | |
| // | |
| // We use separate scaled versions because the Select* functions need | |
| // to explicitly check for a matching constant and return false here so that | |
| // the reg+imm forms will match instead. This is a horrible way to do that, | |
| // as it forces tight coupling between the methods, but it's how selectiondag | |
| // currently works. | |
| def t_addrmode_rrs1 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeRI5S1", []> { | |
| let EncoderMethod = "getThumbAddrModeRegRegOpValue"; | |
| let PrintMethod = "printThumbAddrModeRROperand"; | |
| let DecoderMethod = "DecodeThumbAddrModeRR"; | |
| let ParserMatchClass = t_addrmode_rr_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, tGPR:$offsreg); | |
| } | |
| def t_addrmode_rrs2 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeRI5S2", []> { | |
| let EncoderMethod = "getThumbAddrModeRegRegOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeRR"; | |
| let PrintMethod = "printThumbAddrModeRROperand"; | |
| let ParserMatchClass = t_addrmode_rr_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, tGPR:$offsreg); | |
| } | |
| def t_addrmode_rrs4 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeRI5S4", []> { | |
| let EncoderMethod = "getThumbAddrModeRegRegOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeRR"; | |
| let PrintMethod = "printThumbAddrModeRROperand"; | |
| let ParserMatchClass = t_addrmode_rr_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, tGPR:$offsreg); | |
| } | |
| // t_addrmode_is4 := reg + imm5 * 4 | |
| // | |
| def t_addrmode_is4_asm_operand : AsmOperandClass { let Name = "MemThumbRIs4"; } | |
| def t_addrmode_is4 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeImm5S4", []> { | |
| let EncoderMethod = "getAddrModeISOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeIS"; | |
| let PrintMethod = "printThumbAddrModeImm5S4Operand"; | |
| let ParserMatchClass = t_addrmode_is4_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, i32imm:$offsimm); | |
| } | |
| // t_addrmode_is2 := reg + imm5 * 2 | |
| // | |
| def t_addrmode_is2_asm_operand : AsmOperandClass { let Name = "MemThumbRIs2"; } | |
| def t_addrmode_is2 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeImm5S2", []> { | |
| let EncoderMethod = "getAddrModeISOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeIS"; | |
| let PrintMethod = "printThumbAddrModeImm5S2Operand"; | |
| let ParserMatchClass = t_addrmode_is2_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, i32imm:$offsimm); | |
| } | |
| // t_addrmode_is1 := reg + imm5 | |
| // | |
| def t_addrmode_is1_asm_operand : AsmOperandClass { let Name = "MemThumbRIs1"; } | |
| def t_addrmode_is1 : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeImm5S1", []> { | |
| let EncoderMethod = "getAddrModeISOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeIS"; | |
| let PrintMethod = "printThumbAddrModeImm5S1Operand"; | |
| let ParserMatchClass = t_addrmode_is1_asm_operand; | |
| let MIOperandInfo = (ops tGPR:$base, i32imm:$offsimm); | |
| } | |
| // t_addrmode_sp := sp + imm8 * 4 | |
| // | |
| // FIXME: This really shouldn't have an explicit SP operand at all. It should | |
| // be implicit, just like in the instruction encoding itself. | |
| def t_addrmode_sp_asm_operand : AsmOperandClass { let Name = "MemThumbSPI"; } | |
| def t_addrmode_sp : Operand<i32>, | |
| ComplexPattern<i32, 2, "SelectThumbAddrModeSP", []> { | |
| let EncoderMethod = "getAddrModeThumbSPOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModeSP"; | |
| let PrintMethod = "printThumbAddrModeSPOperand"; | |
| let ParserMatchClass = t_addrmode_sp_asm_operand; | |
| let MIOperandInfo = (ops GPR:$base, i32imm:$offsimm); | |
| } | |
| // t_addrmode_pc := <label> => pc + imm8 * 4 | |
| // | |
| def t_addrmode_pc : Operand<i32> { | |
| let EncoderMethod = "getAddrModePCOpValue"; | |
| let DecoderMethod = "DecodeThumbAddrModePC"; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Miscellaneous Instructions. | |
| // | |
| // FIXME: Marking these as hasSideEffects is necessary to prevent machine DCE | |
| // from removing one half of the matched pairs. That breaks PEI, which assumes | |
| // these will always be in pairs, and asserts if it finds otherwise. Better way? | |
| let Defs = [SP], Uses = [SP], hasSideEffects = 1 in { | |
| def tADJCALLSTACKUP : | |
| PseudoInst<(outs), (ins i32imm:$amt1, i32imm:$amt2), NoItinerary, | |
| [(ARMcallseq_end imm:$amt1, imm:$amt2)]>, | |
| Requires<[IsThumb, IsThumb1Only]>; | |
| def tADJCALLSTACKDOWN : | |
| PseudoInst<(outs), (ins i32imm:$amt), NoItinerary, | |
| [(ARMcallseq_start imm:$amt)]>, | |
| Requires<[IsThumb, IsThumb1Only]>; | |
| } | |
| class T1SystemEncoding<bits<8> opc> | |
| : T1Encoding<0b101111> { | |
| let Inst{9-8} = 0b11; | |
| let Inst{7-0} = opc; | |
| } | |
| def tNOP : T1pI<(outs), (ins), NoItinerary, "nop", "", []>, | |
| T1SystemEncoding<0x00>, // A8.6.110 | |
| Requires<[IsThumb2]>; | |
| def tYIELD : T1pI<(outs), (ins), NoItinerary, "yield", "", []>, | |
| T1SystemEncoding<0x10>; // A8.6.410 | |
| def tWFE : T1pI<(outs), (ins), NoItinerary, "wfe", "", []>, | |
| T1SystemEncoding<0x20>; // A8.6.408 | |
| def tWFI : T1pI<(outs), (ins), NoItinerary, "wfi", "", []>, | |
| T1SystemEncoding<0x30>; // A8.6.409 | |
| def tSEV : T1pI<(outs), (ins), NoItinerary, "sev", "", []>, | |
| T1SystemEncoding<0x40>; // A8.6.157 | |
| // The imm operand $val can be used by a debugger to store more information | |
| // about the breakpoint. | |
| def tBKPT : T1I<(outs), (ins imm0_255:$val), NoItinerary, "bkpt\t$val", | |
| []>, | |
| T1Encoding<0b101111> { | |
| let Inst{9-8} = 0b10; | |
| // A8.6.22 | |
| bits<8> val; | |
| let Inst{7-0} = val; | |
| } | |
| def tSETEND : T1I<(outs), (ins setend_op:$end), NoItinerary, "setend\t$end", | |
| []>, T1Encoding<0b101101> { | |
| bits<1> end; | |
| // A8.6.156 | |
| let Inst{9-5} = 0b10010; | |
| let Inst{4} = 1; | |
| let Inst{3} = end; | |
| let Inst{2-0} = 0b000; | |
| } | |
| // Change Processor State is a system instruction -- for disassembly only. | |
| def tCPS : T1I<(outs), (ins imod_op:$imod, iflags_op:$iflags), | |
| NoItinerary, "cps$imod $iflags", []>, | |
| T1Misc<0b0110011> { | |
| // A8.6.38 & B6.1.1 | |
| bit imod; | |
| bits<3> iflags; | |
| let Inst{4} = imod; | |
| let Inst{3} = 0; | |
| let Inst{2-0} = iflags; | |
| let DecoderMethod = "DecodeThumbCPS"; | |
| } | |
| // For both thumb1 and thumb2. | |
| let isNotDuplicable = 1, isCodeGenOnly = 1 in | |
| def tPICADD : TIt<(outs GPR:$dst), (ins GPR:$lhs, pclabel:$cp), IIC_iALUr, "", | |
| [(set GPR:$dst, (ARMpic_add GPR:$lhs, imm:$cp))]>, | |
| T1Special<{0,0,?,?}> { | |
| // A8.6.6 | |
| bits<3> dst; | |
| let Inst{6-3} = 0b1111; // Rm = pc | |
| let Inst{2-0} = dst; | |
| } | |
| // ADD <Rd>, sp, #<imm8> | |
| // FIXME: This should not be marked as having side effects, and it should be | |
| // rematerializable. Clearing the side effect bit causes miscompilations, | |
| // probably because the instruction can be moved around. | |
| def tADDrSPi : T1pI<(outs tGPR:$dst), (ins GPRsp:$sp, t_imm0_1020s4:$imm), | |
| IIC_iALUi, "add", "\t$dst, $sp, $imm", []>, | |
| T1Encoding<{1,0,1,0,1,?}> { | |
| // A6.2 & A8.6.8 | |
| bits<3> dst; | |
| bits<8> imm; | |
| let Inst{10-8} = dst; | |
| let Inst{7-0} = imm; | |
| let DecoderMethod = "DecodeThumbAddSpecialReg"; | |
| } | |
| // ADD sp, sp, #<imm7> | |
| def tADDspi : T1pIt<(outs GPRsp:$Rdn), (ins GPRsp:$Rn, t_imm0_508s4:$imm), | |
| IIC_iALUi, "add", "\t$Rdn, $imm", []>, | |
| T1Misc<{0,0,0,0,0,?,?}> { | |
| // A6.2.5 & A8.6.8 | |
| bits<7> imm; | |
| let Inst{6-0} = imm; | |
| let DecoderMethod = "DecodeThumbAddSPImm"; | |
| } | |
| // SUB sp, sp, #<imm7> | |
| // FIXME: The encoding and the ASM string don't match up. | |
| def tSUBspi : T1pIt<(outs GPRsp:$Rdn), (ins GPRsp:$Rn, t_imm0_508s4:$imm), | |
| IIC_iALUi, "sub", "\t$Rdn, $imm", []>, | |
| T1Misc<{0,0,0,0,1,?,?}> { | |
| // A6.2.5 & A8.6.214 | |
| bits<7> imm; | |
| let Inst{6-0} = imm; | |
| let DecoderMethod = "DecodeThumbAddSPImm"; | |
| } | |
| // Can optionally specify SP as a three operand instruction. | |
| def : tInstAlias<"add${p} sp, sp, $imm", | |
| (tADDspi SP, t_imm0_508s4:$imm, pred:$p)>; | |
| def : tInstAlias<"sub${p} sp, sp, $imm", | |
| (tSUBspi SP, t_imm0_508s4:$imm, pred:$p)>; | |
| // ADD <Rm>, sp | |
| def tADDrSP : T1pIt<(outs GPR:$Rdn), (ins GPR:$Rn, GPRsp:$sp), IIC_iALUr, | |
| "add", "\t$Rdn, $sp, $Rn", []>, | |
| T1Special<{0,0,?,?}> { | |
| // A8.6.9 Encoding T1 | |
| bits<4> Rdn; | |
| let Inst{7} = Rdn{3}; | |
| let Inst{6-3} = 0b1101; | |
| let Inst{2-0} = Rdn{2-0}; | |
| let DecoderMethod = "DecodeThumbAddSPReg"; | |
| } | |
| // ADD sp, <Rm> | |
| def tADDspr : T1pIt<(outs GPRsp:$Rdn), (ins GPRsp:$Rn, GPR:$Rm), IIC_iALUr, | |
| "add", "\t$Rdn, $Rm", []>, | |
| T1Special<{0,0,?,?}> { | |
| // A8.6.9 Encoding T2 | |
| bits<4> Rm; | |
| let Inst{7} = 1; | |
| let Inst{6-3} = Rm; | |
| let Inst{2-0} = 0b101; | |
| let DecoderMethod = "DecodeThumbAddSPReg"; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Control Flow Instructions. | |
| // | |
| // Indirect branches | |
| let isBranch = 1, isTerminator = 1, isBarrier = 1, isIndirectBranch = 1 in { | |
| def tBX : TI<(outs), (ins GPR:$Rm, pred:$p), IIC_Br, "bx${p}\t$Rm", []>, | |
| T1Special<{1,1,0,?}> { | |
| // A6.2.3 & A8.6.25 | |
| bits<4> Rm; | |
| let Inst{6-3} = Rm; | |
| let Inst{2-0} = 0b000; | |
| } | |
| } | |
| let isReturn = 1, isTerminator = 1, isBarrier = 1 in { | |
| def tBX_RET : tPseudoExpand<(outs), (ins pred:$p), 2, IIC_Br, | |
| [(ARMretflag)], (tBX LR, pred:$p)>; | |
| // Alternative return instruction used by vararg functions. | |
| def tBX_RET_vararg : tPseudoExpand<(outs), (ins tGPR:$Rm, pred:$p), | |
| 2, IIC_Br, [], | |
| (tBX GPR:$Rm, pred:$p)>; | |
| } | |
| // All calls clobber the non-callee saved registers. SP is marked as a use to | |
| // prevent stack-pointer assignments that appear immediately before calls from | |
| // potentially appearing dead. | |
| let isCall = 1, | |
| // On non-Darwin platforms R9 is callee-saved. | |
| Defs = [R0, R1, R2, R3, R12, LR, QQQQ0, QQQQ2, QQQQ3, CPSR, FPSCR], | |
| Uses = [SP] in { | |
| // Also used for Thumb2 | |
| def tBL : TIx2<0b11110, 0b11, 1, | |
| (outs), (ins pred:$p, t_bltarget:$func, variable_ops), IIC_Br, | |
| "bl${p}\t$func", | |
| [(ARMtcall tglobaladdr:$func)]>, | |
| Requires<[IsThumb, IsNotDarwin]> { | |
| bits<22> func; | |
| let Inst{26} = func{21}; | |
| let Inst{25-16} = func{20-11}; | |
| let Inst{13} = 1; | |
| let Inst{11} = 1; | |
| let Inst{10-0} = func{10-0}; | |
| } | |
| // ARMv5T and above, also used for Thumb2 | |
| def tBLXi : TIx2<0b11110, 0b11, 0, | |
| (outs), (ins pred:$p, t_blxtarget:$func, variable_ops), IIC_Br, | |
| "blx${p}\t$func", | |
| [(ARMcall tglobaladdr:$func)]>, | |
| Requires<[IsThumb, HasV5T, IsNotDarwin]> { | |
| bits<21> func; | |
| let Inst{25-16} = func{20-11}; | |
| let Inst{13} = 1; | |
| let Inst{11} = 1; | |
| let Inst{10-1} = func{10-1}; | |
| let Inst{0} = 0; // func{0} is assumed zero | |
| } | |
| // Also used for Thumb2 | |
| def tBLXr : TI<(outs), (ins pred:$p, GPR:$func, variable_ops), IIC_Br, | |
| "blx${p}\t$func", | |
| [(ARMtcall GPR:$func)]>, | |
| Requires<[IsThumb, HasV5T, IsNotDarwin]>, | |
| T1Special<{1,1,1,?}> { // A6.2.3 & A8.6.24; | |
| bits<4> func; | |
| let Inst{6-3} = func; | |
| let Inst{2-0} = 0b000; | |
| } | |
| // ARMv4T | |
| def tBX_CALL : tPseudoInst<(outs), (ins tGPR:$func, variable_ops), | |
| 4, IIC_Br, | |
| [(ARMcall_nolink tGPR:$func)]>, | |
| Requires<[IsThumb, IsThumb1Only, IsNotDarwin]>; | |
| } | |
| let isCall = 1, | |
| // On Darwin R9 is call-clobbered. | |
| // R7 is marked as a use to prevent frame-pointer assignments from being | |
| // moved above / below calls. | |
| Defs = [R0, R1, R2, R3, R9, R12, LR, QQQQ0, QQQQ2, QQQQ3, CPSR, FPSCR], | |
| Uses = [R7, SP] in { | |
| // Also used for Thumb2 | |
| def tBLr9 : tPseudoExpand<(outs), (ins pred:$p, t_bltarget:$func, variable_ops), | |
| 4, IIC_Br, [(ARMtcall tglobaladdr:$func)], | |
| (tBL pred:$p, t_bltarget:$func)>, | |
| Requires<[IsThumb, IsDarwin]>; | |
| // ARMv5T and above, also used for Thumb2 | |
| def tBLXi_r9 : tPseudoExpand<(outs), (ins pred:$p, t_blxtarget:$func, variable_ops), | |
| 4, IIC_Br, [(ARMcall tglobaladdr:$func)], | |
| (tBLXi pred:$p, t_blxtarget:$func)>, | |
| Requires<[IsThumb, HasV5T, IsDarwin]>; | |
| // Also used for Thumb2 | |
| def tBLXr_r9 : tPseudoExpand<(outs), (ins pred:$p, GPR:$func, variable_ops), | |
| 2, IIC_Br, [(ARMtcall GPR:$func)], | |
| (tBLXr pred:$p, GPR:$func)>, | |
| Requires<[IsThumb, HasV5T, IsDarwin]>; | |
| // ARMv4T | |
| def tBXr9_CALL : tPseudoInst<(outs), (ins tGPR:$func, variable_ops), | |
| 4, IIC_Br, | |
| [(ARMcall_nolink tGPR:$func)]>, | |
| Requires<[IsThumb, IsThumb1Only, IsDarwin]>; | |
| } | |
| let isBranch = 1, isTerminator = 1, isBarrier = 1 in { | |
| let isPredicable = 1 in | |
| def tB : T1pI<(outs), (ins t_brtarget:$target), IIC_Br, | |
| "b", "\t$target", [(br bb:$target)]>, | |
| T1Encoding<{1,1,1,0,0,?}> { | |
| bits<11> target; | |
| let Inst{10-0} = target; | |
| } | |
| // Far jump | |
| // Just a pseudo for a tBL instruction. Needed to let regalloc know about | |
| // the clobber of LR. | |
| let Defs = [LR] in | |
| def tBfar : tPseudoExpand<(outs), (ins t_bltarget:$target, pred:$p), | |
| 4, IIC_Br, [], (tBL pred:$p, t_bltarget:$target)>; | |
| def tBR_JTr : tPseudoInst<(outs), | |
| (ins tGPR:$target, i32imm:$jt, i32imm:$id), | |
| 0, IIC_Br, | |
| [(ARMbrjt tGPR:$target, tjumptable:$jt, imm:$id)]> { | |
| list<Predicate> Predicates = [IsThumb, IsThumb1Only]; | |
| } | |
| } | |
| // FIXME: should be able to write a pattern for ARMBrcond, but can't use | |
| // a two-value operand where a dag node expects two operands. :( | |
| let isBranch = 1, isTerminator = 1 in | |
| def tBcc : T1I<(outs), (ins t_bcctarget:$target, pred:$p), IIC_Br, | |
| "b${p}\t$target", | |
| [/*(ARMbrcond bb:$target, imm:$cc)*/]>, | |
| T1BranchCond<{1,1,0,1}> { | |
| bits<4> p; | |
| bits<8> target; | |
| let Inst{11-8} = p; | |
| let Inst{7-0} = target; | |
| } | |
| // Tail calls | |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1 in { | |
| // Darwin versions. | |
| let Defs = [R0, R1, R2, R3, R9, R12, QQQQ0, QQQQ2, QQQQ3, PC], | |
| Uses = [SP] in { | |
| // tTAILJMPd: Darwin version uses a Thumb2 branch (no Thumb1 tail calls | |
| // on Darwin), so it's in ARMInstrThumb2.td. | |
| def tTAILJMPr : tPseudoExpand<(outs), (ins tcGPR:$dst, variable_ops), | |
| 4, IIC_Br, [], | |
| (tBX GPR:$dst, (ops 14, zero_reg))>, | |
| Requires<[IsThumb, IsDarwin]>; | |
| } | |
| // Non-Darwin versions (the difference is R9). | |
| let Defs = [R0, R1, R2, R3, R12, QQQQ0, QQQQ2, QQQQ3, PC], | |
| Uses = [SP] in { | |
| def tTAILJMPdND : tPseudoExpand<(outs), | |
| (ins t_brtarget:$dst, pred:$p, variable_ops), | |
| 4, IIC_Br, [], | |
| (tB t_brtarget:$dst, pred:$p)>, | |
| Requires<[IsThumb, IsNotDarwin]>; | |
| def tTAILJMPrND : tPseudoExpand<(outs), (ins tcGPR:$dst, variable_ops), | |
| 4, IIC_Br, [], | |
| (tBX GPR:$dst, (ops 14, zero_reg))>, | |
| Requires<[IsThumb, IsNotDarwin]>; | |
| } | |
| } | |
| // A8.6.218 Supervisor Call (Software Interrupt) | |
| // A8.6.16 B: Encoding T1 | |
| // If Inst{11-8} == 0b1111 then SEE SVC | |
| let isCall = 1, Uses = [SP] in | |
| def tSVC : T1pI<(outs), (ins imm0_255:$imm), IIC_Br, | |
| "svc", "\t$imm", []>, Encoding16 { | |
| bits<8> imm; | |
| let Inst{15-12} = 0b1101; | |
| let Inst{11-8} = 0b1111; | |
| let Inst{7-0} = imm; | |
| } | |
| // The assembler uses 0xDEFE for a trap instruction. | |
| let isBarrier = 1, isTerminator = 1 in | |
| def tTRAP : TI<(outs), (ins), IIC_Br, | |
| "trap", [(trap)]>, Encoding16 { | |
| let Inst = 0xdefe; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Load Store Instructions. | |
| // | |
| // Loads: reg/reg and reg/imm5 | |
| let canFoldAsLoad = 1, isReMaterializable = 1 in | |
| multiclass thumb_ld_rr_ri_enc<bits<3> reg_opc, bits<4> imm_opc, | |
| Operand AddrMode_r, Operand AddrMode_i, | |
| AddrMode am, InstrItinClass itin_r, | |
| InstrItinClass itin_i, string asm, | |
| PatFrag opnode> { | |
| def r : // reg/reg | |
| T1pILdStEncode<reg_opc, | |
| (outs tGPR:$Rt), (ins AddrMode_r:$addr), | |
| am, itin_r, asm, "\t$Rt, $addr", | |
| [(set tGPR:$Rt, (opnode AddrMode_r:$addr))]>; | |
| def i : // reg/imm5 | |
| T1pILdStEncodeImm<imm_opc, 1 /* Load */, | |
| (outs tGPR:$Rt), (ins AddrMode_i:$addr), | |
| am, itin_i, asm, "\t$Rt, $addr", | |
| [(set tGPR:$Rt, (opnode AddrMode_i:$addr))]>; | |
| } | |
| // Stores: reg/reg and reg/imm5 | |
| multiclass thumb_st_rr_ri_enc<bits<3> reg_opc, bits<4> imm_opc, | |
| Operand AddrMode_r, Operand AddrMode_i, | |
| AddrMode am, InstrItinClass itin_r, | |
| InstrItinClass itin_i, string asm, | |
| PatFrag opnode> { | |
| def r : // reg/reg | |
| T1pILdStEncode<reg_opc, | |
| (outs), (ins tGPR:$Rt, AddrMode_r:$addr), | |
| am, itin_r, asm, "\t$Rt, $addr", | |
| [(opnode tGPR:$Rt, AddrMode_r:$addr)]>; | |
| def i : // reg/imm5 | |
| T1pILdStEncodeImm<imm_opc, 0 /* Store */, | |
| (outs), (ins tGPR:$Rt, AddrMode_i:$addr), | |
| am, itin_i, asm, "\t$Rt, $addr", | |
| [(opnode tGPR:$Rt, AddrMode_i:$addr)]>; | |
| } | |
| // A8.6.57 & A8.6.60 | |
| defm tLDR : thumb_ld_rr_ri_enc<0b100, 0b0110, t_addrmode_rrs4, | |
| t_addrmode_is4, AddrModeT1_4, | |
| IIC_iLoad_r, IIC_iLoad_i, "ldr", | |
| UnOpFrag<(load node:$Src)>>; | |
| // A8.6.64 & A8.6.61 | |
| defm tLDRB : thumb_ld_rr_ri_enc<0b110, 0b0111, t_addrmode_rrs1, | |
| t_addrmode_is1, AddrModeT1_1, | |
| IIC_iLoad_bh_r, IIC_iLoad_bh_i, "ldrb", | |
| UnOpFrag<(zextloadi8 node:$Src)>>; | |
| // A8.6.76 & A8.6.73 | |
| defm tLDRH : thumb_ld_rr_ri_enc<0b101, 0b1000, t_addrmode_rrs2, | |
| t_addrmode_is2, AddrModeT1_2, | |
| IIC_iLoad_bh_r, IIC_iLoad_bh_i, "ldrh", | |
| UnOpFrag<(zextloadi16 node:$Src)>>; | |
| let AddedComplexity = 10 in | |
| def tLDRSB : // A8.6.80 | |
| T1pILdStEncode<0b011, (outs tGPR:$Rt), (ins t_addrmode_rr:$addr), | |
| AddrModeT1_1, IIC_iLoad_bh_r, | |
| "ldrsb", "\t$Rt, $addr", | |
| [(set tGPR:$Rt, (sextloadi8 t_addrmode_rr:$addr))]>; | |
| let AddedComplexity = 10 in | |
| def tLDRSH : // A8.6.84 | |
| T1pILdStEncode<0b111, (outs tGPR:$Rt), (ins t_addrmode_rr:$addr), | |
| AddrModeT1_2, IIC_iLoad_bh_r, | |
| "ldrsh", "\t$Rt, $addr", | |
| [(set tGPR:$Rt, (sextloadi16 t_addrmode_rr:$addr))]>; | |
| let canFoldAsLoad = 1 in | |
| def tLDRspi : T1pIs<(outs tGPR:$Rt), (ins t_addrmode_sp:$addr), IIC_iLoad_i, | |
| "ldr", "\t$Rt, $addr", | |
| [(set tGPR:$Rt, (load t_addrmode_sp:$addr))]>, | |
| T1LdStSP<{1,?,?}> { | |
| bits<3> Rt; | |
| bits<8> addr; | |
| let Inst{10-8} = Rt; | |
| let Inst{7-0} = addr; | |
| } | |
| // Load tconstpool | |
| // FIXME: Use ldr.n to work around a Darwin assembler bug. | |
| let canFoldAsLoad = 1, isReMaterializable = 1, isCodeGenOnly = 1 in | |
| def tLDRpci : T1pIs<(outs tGPR:$Rt), (ins t_addrmode_pc:$addr), IIC_iLoad_i, | |
| "ldr", ".n\t$Rt, $addr", | |
| [(set tGPR:$Rt, (load (ARMWrapper tconstpool:$addr)))]>, | |
| T1Encoding<{0,1,0,0,1,?}> { | |
| // A6.2 & A8.6.59 | |
| bits<3> Rt; | |
| bits<8> addr; | |
| let Inst{10-8} = Rt; | |
| let Inst{7-0} = addr; | |
| } | |
| // FIXME: Remove this entry when the above ldr.n workaround is fixed. | |
| // For disassembly use only. | |
| def tLDRpciDIS : T1pIs<(outs tGPR:$Rt), (ins t_addrmode_pc:$addr), IIC_iLoad_i, | |
| "ldr", "\t$Rt, $addr", | |
| [/* disassembly only */]>, | |
| T1Encoding<{0,1,0,0,1,?}> { | |
| // A6.2 & A8.6.59 | |
| bits<3> Rt; | |
| bits<8> addr; | |
| let Inst{10-8} = Rt; | |
| let Inst{7-0} = addr; | |
| } | |
| // A8.6.194 & A8.6.192 | |
| defm tSTR : thumb_st_rr_ri_enc<0b000, 0b0110, t_addrmode_rrs4, | |
| t_addrmode_is4, AddrModeT1_4, | |
| IIC_iStore_r, IIC_iStore_i, "str", | |
| BinOpFrag<(store node:$LHS, node:$RHS)>>; | |
| // A8.6.197 & A8.6.195 | |
| defm tSTRB : thumb_st_rr_ri_enc<0b010, 0b0111, t_addrmode_rrs1, | |
| t_addrmode_is1, AddrModeT1_1, | |
| IIC_iStore_bh_r, IIC_iStore_bh_i, "strb", | |
| BinOpFrag<(truncstorei8 node:$LHS, node:$RHS)>>; | |
| // A8.6.207 & A8.6.205 | |
| defm tSTRH : thumb_st_rr_ri_enc<0b001, 0b1000, t_addrmode_rrs2, | |
| t_addrmode_is2, AddrModeT1_2, | |
| IIC_iStore_bh_r, IIC_iStore_bh_i, "strh", | |
| BinOpFrag<(truncstorei16 node:$LHS, node:$RHS)>>; | |
| def tSTRspi : T1pIs<(outs), (ins tGPR:$Rt, t_addrmode_sp:$addr), IIC_iStore_i, | |
| "str", "\t$Rt, $addr", | |
| [(store tGPR:$Rt, t_addrmode_sp:$addr)]>, | |
| T1LdStSP<{0,?,?}> { | |
| bits<3> Rt; | |
| bits<8> addr; | |
| let Inst{10-8} = Rt; | |
| let Inst{7-0} = addr; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Load / store multiple Instructions. | |
| // | |
| // These require base address to be written back or one of the loaded regs. | |
| let neverHasSideEffects = 1 in { | |
| let mayLoad = 1, hasExtraDefRegAllocReq = 1 in | |
| def tLDMIA : T1I<(outs), (ins tGPR:$Rn, pred:$p, reglist:$regs, variable_ops), | |
| IIC_iLoad_m, "ldm${p}\t$Rn, $regs", []>, T1Encoding<{1,1,0,0,1,?}> { | |
| bits<3> Rn; | |
| bits<8> regs; | |
| let Inst{10-8} = Rn; | |
| let Inst{7-0} = regs; | |
| } | |
| // Writeback version is just a pseudo, as there's no encoding difference. | |
| // Writeback happens iff the base register is not in the destination register | |
| // list. | |
| def tLDMIA_UPD : | |
| InstTemplate<AddrModeNone, 0, IndexModeNone, Pseudo, GenericDomain, | |
| "$Rn = $wb", IIC_iLoad_mu>, | |
| PseudoInstExpansion<(tLDMIA tGPR:$Rn, pred:$p, reglist:$regs)> { | |
| let Size = 2; | |
| let OutOperandList = (outs GPR:$wb); | |
| let InOperandList = (ins GPR:$Rn, pred:$p, reglist:$regs, variable_ops); | |
| let Pattern = []; | |
| let isCodeGenOnly = 1; | |
| let isPseudo = 1; | |
| list<Predicate> Predicates = [IsThumb]; | |
| } | |
| // There is no non-writeback version of STM for Thumb. | |
| let mayStore = 1, hasExtraSrcRegAllocReq = 1 in | |
| def tSTMIA_UPD : Thumb1I<(outs GPR:$wb), | |
| (ins tGPR:$Rn, pred:$p, reglist:$regs, variable_ops), | |
| AddrModeNone, 2, IIC_iStore_mu, | |
| "stm${p}\t$Rn!, $regs", "$Rn = $wb", []>, | |
| T1Encoding<{1,1,0,0,0,?}> { | |
| bits<3> Rn; | |
| bits<8> regs; | |
| let Inst{10-8} = Rn; | |
| let Inst{7-0} = regs; | |
| } | |
| } // neverHasSideEffects | |
| def : InstAlias<"ldm${p} $Rn!, $regs", | |
| (tLDMIA tGPR:$Rn, pred:$p, reglist:$regs)>, | |
| Requires<[IsThumb, IsThumb1Only]>; | |
| let mayLoad = 1, Uses = [SP], Defs = [SP], hasExtraDefRegAllocReq = 1 in | |
| def tPOP : T1I<(outs), (ins pred:$p, reglist:$regs, variable_ops), | |
| IIC_iPop, | |
| "pop${p}\t$regs", []>, | |
| T1Misc<{1,1,0,?,?,?,?}> { | |
| bits<16> regs; | |
| let Inst{8} = regs{15}; | |
| let Inst{7-0} = regs{7-0}; | |
| } | |
| let mayStore = 1, Uses = [SP], Defs = [SP], hasExtraSrcRegAllocReq = 1 in | |
| def tPUSH : T1I<(outs), (ins pred:$p, reglist:$regs, variable_ops), | |
| IIC_iStore_m, | |
| "push${p}\t$regs", []>, | |
| T1Misc<{0,1,0,?,?,?,?}> { | |
| bits<16> regs; | |
| let Inst{8} = regs{14}; | |
| let Inst{7-0} = regs{7-0}; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Arithmetic Instructions. | |
| // | |
| // Helper classes for encoding T1pI patterns: | |
| class T1pIDPEncode<bits<4> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1pI<oops, iops, itin, opc, asm, pattern>, | |
| T1DataProcessing<opA> { | |
| bits<3> Rm; | |
| bits<3> Rn; | |
| let Inst{5-3} = Rm; | |
| let Inst{2-0} = Rn; | |
| } | |
| class T1pIMiscEncode<bits<7> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1pI<oops, iops, itin, opc, asm, pattern>, | |
| T1Misc<opA> { | |
| bits<3> Rm; | |
| bits<3> Rd; | |
| let Inst{5-3} = Rm; | |
| let Inst{2-0} = Rd; | |
| } | |
| // Helper classes for encoding T1sI patterns: | |
| class T1sIDPEncode<bits<4> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1sI<oops, iops, itin, opc, asm, pattern>, | |
| T1DataProcessing<opA> { | |
| bits<3> Rd; | |
| bits<3> Rn; | |
| let Inst{5-3} = Rn; | |
| let Inst{2-0} = Rd; | |
| } | |
| class T1sIGenEncode<bits<5> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1sI<oops, iops, itin, opc, asm, pattern>, | |
| T1General<opA> { | |
| bits<3> Rm; | |
| bits<3> Rn; | |
| bits<3> Rd; | |
| let Inst{8-6} = Rm; | |
| let Inst{5-3} = Rn; | |
| let Inst{2-0} = Rd; | |
| } | |
| class T1sIGenEncodeImm<bits<5> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1sI<oops, iops, itin, opc, asm, pattern>, | |
| T1General<opA> { | |
| bits<3> Rd; | |
| bits<3> Rm; | |
| let Inst{5-3} = Rm; | |
| let Inst{2-0} = Rd; | |
| } | |
| // Helper classes for encoding T1sIt patterns: | |
| class T1sItDPEncode<bits<4> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1sIt<oops, iops, itin, opc, asm, pattern>, | |
| T1DataProcessing<opA> { | |
| bits<3> Rdn; | |
| bits<3> Rm; | |
| let Inst{5-3} = Rm; | |
| let Inst{2-0} = Rdn; | |
| } | |
| class T1sItGenEncodeImm<bits<5> opA, dag oops, dag iops, InstrItinClass itin, | |
| string opc, string asm, list<dag> pattern> | |
| : T1sIt<oops, iops, itin, opc, asm, pattern>, | |
| T1General<opA> { | |
| bits<3> Rdn; | |
| bits<8> imm8; | |
| let Inst{10-8} = Rdn; | |
| let Inst{7-0} = imm8; | |
| } | |
| // Add with carry register | |
| let isCommutable = 1, Uses = [CPSR] in | |
| def tADC : // A8.6.2 | |
| T1sItDPEncode<0b0101, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), IIC_iALUr, | |
| "adc", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (adde tGPR:$Rn, tGPR:$Rm))]>; | |
| // Add immediate | |
| def tADDi3 : // A8.6.4 T1 | |
| T1sIGenEncodeImm<0b01110, (outs tGPR:$Rd), (ins tGPR:$Rm, imm0_7:$imm3), | |
| IIC_iALUi, | |
| "add", "\t$Rd, $Rm, $imm3", | |
| [(set tGPR:$Rd, (add tGPR:$Rm, imm0_7:$imm3))]> { | |
| bits<3> imm3; | |
| let Inst{8-6} = imm3; | |
| } | |
| def tADDi8 : // A8.6.4 T2 | |
| T1sItGenEncodeImm<{1,1,0,?,?}, (outs tGPR:$Rdn), | |
| (ins tGPR:$Rn, imm0_255:$imm8), IIC_iALUi, | |
| "add", "\t$Rdn, $imm8", | |
| [(set tGPR:$Rdn, (add tGPR:$Rn, imm8_255:$imm8))]>; | |
| // Add register | |
| let isCommutable = 1 in | |
| def tADDrr : // A8.6.6 T1 | |
| T1sIGenEncode<0b01100, (outs tGPR:$Rd), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iALUr, | |
| "add", "\t$Rd, $Rn, $Rm", | |
| [(set tGPR:$Rd, (add tGPR:$Rn, tGPR:$Rm))]>; | |
| let neverHasSideEffects = 1 in | |
| def tADDhirr : T1pIt<(outs GPR:$Rdn), (ins GPR:$Rn, GPR:$Rm), IIC_iALUr, | |
| "add", "\t$Rdn, $Rm", []>, | |
| T1Special<{0,0,?,?}> { | |
| // A8.6.6 T2 | |
| bits<4> Rdn; | |
| bits<4> Rm; | |
| let Inst{7} = Rdn{3}; | |
| let Inst{6-3} = Rm; | |
| let Inst{2-0} = Rdn{2-0}; | |
| } | |
| // AND register | |
| let isCommutable = 1 in | |
| def tAND : // A8.6.12 | |
| T1sItDPEncode<0b0000, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iBITr, | |
| "and", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (and tGPR:$Rn, tGPR:$Rm))]>; | |
| // ASR immediate | |
| def tASRri : // A8.6.14 | |
| T1sIGenEncodeImm<{0,1,0,?,?}, (outs tGPR:$Rd), (ins tGPR:$Rm, imm_sr:$imm5), | |
| IIC_iMOVsi, | |
| "asr", "\t$Rd, $Rm, $imm5", | |
| [(set tGPR:$Rd, (sra tGPR:$Rm, (i32 imm_sr:$imm5)))]> { | |
| bits<5> imm5; | |
| let Inst{10-6} = imm5; | |
| } | |
| // ASR register | |
| def tASRrr : // A8.6.15 | |
| T1sItDPEncode<0b0100, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iMOVsr, | |
| "asr", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (sra tGPR:$Rn, tGPR:$Rm))]>; | |
| // BIC register | |
| def tBIC : // A8.6.20 | |
| T1sItDPEncode<0b1110, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iBITr, | |
| "bic", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (and tGPR:$Rn, (not tGPR:$Rm)))]>; | |
| // CMN register | |
| let isCompare = 1, Defs = [CPSR] in { | |
| //FIXME: Disable CMN, as CCodes are backwards from compare expectations | |
| // Compare-to-zero still works out, just not the relationals | |
| //def tCMN : // A8.6.33 | |
| // T1pIDPEncode<0b1011, (outs), (ins tGPR:$lhs, tGPR:$rhs), | |
| // IIC_iCMPr, | |
| // "cmn", "\t$lhs, $rhs", | |
| // [(ARMcmp tGPR:$lhs, (ineg tGPR:$rhs))]>; | |
| def tCMNz : // A8.6.33 | |
| T1pIDPEncode<0b1011, (outs), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iCMPr, | |
| "cmn", "\t$Rn, $Rm", | |
| [(ARMcmpZ tGPR:$Rn, (ineg tGPR:$Rm))]>; | |
| } // isCompare = 1, Defs = [CPSR] | |
| // CMP immediate | |
| let isCompare = 1, Defs = [CPSR] in { | |
| def tCMPi8 : T1pI<(outs), (ins tGPR:$Rn, imm0_255:$imm8), IIC_iCMPi, | |
| "cmp", "\t$Rn, $imm8", | |
| [(ARMcmp tGPR:$Rn, imm0_255:$imm8)]>, | |
| T1General<{1,0,1,?,?}> { | |
| // A8.6.35 | |
| bits<3> Rn; | |
| bits<8> imm8; | |
| let Inst{10-8} = Rn; | |
| let Inst{7-0} = imm8; | |
| } | |
| // CMP register | |
| def tCMPr : // A8.6.36 T1 | |
| T1pIDPEncode<0b1010, (outs), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iCMPr, | |
| "cmp", "\t$Rn, $Rm", | |
| [(ARMcmp tGPR:$Rn, tGPR:$Rm)]>; | |
| def tCMPhir : T1pI<(outs), (ins GPR:$Rn, GPR:$Rm), IIC_iCMPr, | |
| "cmp", "\t$Rn, $Rm", []>, | |
| T1Special<{0,1,?,?}> { | |
| // A8.6.36 T2 | |
| bits<4> Rm; | |
| bits<4> Rn; | |
| let Inst{7} = Rn{3}; | |
| let Inst{6-3} = Rm; | |
| let Inst{2-0} = Rn{2-0}; | |
| } | |
| } // isCompare = 1, Defs = [CPSR] | |
| // XOR register | |
| let isCommutable = 1 in | |
| def tEOR : // A8.6.45 | |
| T1sItDPEncode<0b0001, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iBITr, | |
| "eor", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (xor tGPR:$Rn, tGPR:$Rm))]>; | |
| // LSL immediate | |
| def tLSLri : // A8.6.88 | |
| T1sIGenEncodeImm<{0,0,0,?,?}, (outs tGPR:$Rd), (ins tGPR:$Rm, imm0_31:$imm5), | |
| IIC_iMOVsi, | |
| "lsl", "\t$Rd, $Rm, $imm5", | |
| [(set tGPR:$Rd, (shl tGPR:$Rm, (i32 imm:$imm5)))]> { | |
| bits<5> imm5; | |
| let Inst{10-6} = imm5; | |
| } | |
| // LSL register | |
| def tLSLrr : // A8.6.89 | |
| T1sItDPEncode<0b0010, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iMOVsr, | |
| "lsl", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (shl tGPR:$Rn, tGPR:$Rm))]>; | |
| // LSR immediate | |
| def tLSRri : // A8.6.90 | |
| T1sIGenEncodeImm<{0,0,1,?,?}, (outs tGPR:$Rd), (ins tGPR:$Rm, imm_sr:$imm5), | |
| IIC_iMOVsi, | |
| "lsr", "\t$Rd, $Rm, $imm5", | |
| [(set tGPR:$Rd, (srl tGPR:$Rm, (i32 imm_sr:$imm5)))]> { | |
| bits<5> imm5; | |
| let Inst{10-6} = imm5; | |
| } | |
| // LSR register | |
| def tLSRrr : // A8.6.91 | |
| T1sItDPEncode<0b0011, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iMOVsr, | |
| "lsr", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (srl tGPR:$Rn, tGPR:$Rm))]>; | |
| // Move register | |
| let isMoveImm = 1 in | |
| def tMOVi8 : T1sI<(outs tGPR:$Rd), (ins imm0_255:$imm8), IIC_iMOVi, | |
| "mov", "\t$Rd, $imm8", | |
| [(set tGPR:$Rd, imm0_255:$imm8)]>, | |
| T1General<{1,0,0,?,?}> { | |
| // A8.6.96 | |
| bits<3> Rd; | |
| bits<8> imm8; | |
| let Inst{10-8} = Rd; | |
| let Inst{7-0} = imm8; | |
| } | |
| // Because we have an explicit tMOVSr below, we need an alias to handle | |
| // the immediate "movs" form here. Blech. | |
| def : tInstAlias <"movs $Rdn, $imm", | |
| (tMOVi8 tGPR:$Rdn, CPSR, imm0_255:$imm, 14, 0)>; | |
| // A7-73: MOV(2) - mov setting flag. | |
| let neverHasSideEffects = 1 in { | |
| def tMOVr : Thumb1pI<(outs GPR:$Rd), (ins GPR:$Rm), AddrModeNone, | |
| 2, IIC_iMOVr, | |
| "mov", "\t$Rd, $Rm", "", []>, | |
| T1Special<{1,0,?,?}> { | |
| // A8.6.97 | |
| bits<4> Rd; | |
| bits<4> Rm; | |
| let Inst{7} = Rd{3}; | |
| let Inst{6-3} = Rm; | |
| let Inst{2-0} = Rd{2-0}; | |
| } | |
| let Defs = [CPSR] in | |
| def tMOVSr : T1I<(outs tGPR:$Rd), (ins tGPR:$Rm), IIC_iMOVr, | |
| "movs\t$Rd, $Rm", []>, Encoding16 { | |
| // A8.6.97 | |
| bits<3> Rd; | |
| bits<3> Rm; | |
| let Inst{15-6} = 0b0000000000; | |
| let Inst{5-3} = Rm; | |
| let Inst{2-0} = Rd; | |
| } | |
| } // neverHasSideEffects | |
| // Multiply register | |
| let isCommutable = 1 in | |
| def tMUL : // A8.6.105 T1 | |
| Thumb1sI<(outs tGPR:$Rd), (ins tGPR:$Rn, tGPR:$Rm), AddrModeNone, 2, | |
| IIC_iMUL32, "mul", "\t$Rd, $Rn, $Rm", "$Rm = $Rd", | |
| [(set tGPR:$Rd, (mul tGPR:$Rn, tGPR:$Rm))]>, | |
| T1DataProcessing<0b1101> { | |
| bits<3> Rd; | |
| bits<3> Rn; | |
| let Inst{5-3} = Rn; | |
| let Inst{2-0} = Rd; | |
| let AsmMatchConverter = "cvtThumbMultiply"; | |
| } | |
| def :tInstAlias<"mul${s}${p} $Rdm, $Rn", (tMUL tGPR:$Rdm, s_cc_out:$s, tGPR:$Rn, | |
| pred:$p)>; | |
| // Move inverse register | |
| def tMVN : // A8.6.107 | |
| T1sIDPEncode<0b1111, (outs tGPR:$Rd), (ins tGPR:$Rn), IIC_iMVNr, | |
| "mvn", "\t$Rd, $Rn", | |
| [(set tGPR:$Rd, (not tGPR:$Rn))]>; | |
| // Bitwise or register | |
| let isCommutable = 1 in | |
| def tORR : // A8.6.114 | |
| T1sItDPEncode<0b1100, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iBITr, | |
| "orr", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (or tGPR:$Rn, tGPR:$Rm))]>; | |
| // Swaps | |
| def tREV : // A8.6.134 | |
| T1pIMiscEncode<{1,0,1,0,0,0,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "rev", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (bswap tGPR:$Rm))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def tREV16 : // A8.6.135 | |
| T1pIMiscEncode<{1,0,1,0,0,1,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "rev16", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (rotr (bswap tGPR:$Rm), (i32 16)))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def tREVSH : // A8.6.136 | |
| T1pIMiscEncode<{1,0,1,0,1,1,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "revsh", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (sra (bswap tGPR:$Rm), (i32 16)))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| // Rotate right register | |
| def tROR : // A8.6.139 | |
| T1sItDPEncode<0b0111, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iMOVsr, | |
| "ror", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (rotr tGPR:$Rn, tGPR:$Rm))]>; | |
| // Negate register | |
| def tRSB : // A8.6.141 | |
| T1sIDPEncode<0b1001, (outs tGPR:$Rd), (ins tGPR:$Rn), | |
| IIC_iALUi, | |
| "rsb", "\t$Rd, $Rn, #0", | |
| [(set tGPR:$Rd, (ineg tGPR:$Rn))]>; | |
| def : tInstAlias<"neg${s}${p} $Rd, $Rm", | |
| (tRSB tGPR:$Rd, s_cc_out:$s, tGPR:$Rm, pred:$p)>; | |
| // Subtract with carry register | |
| let Uses = [CPSR] in | |
| def tSBC : // A8.6.151 | |
| T1sItDPEncode<0b0110, (outs tGPR:$Rdn), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iALUr, | |
| "sbc", "\t$Rdn, $Rm", | |
| [(set tGPR:$Rdn, (sube tGPR:$Rn, tGPR:$Rm))]>; | |
| // Subtract immediate | |
| def tSUBi3 : // A8.6.210 T1 | |
| T1sIGenEncodeImm<0b01111, (outs tGPR:$Rd), (ins tGPR:$Rm, imm0_7:$imm3), | |
| IIC_iALUi, | |
| "sub", "\t$Rd, $Rm, $imm3", | |
| [(set tGPR:$Rd, (add tGPR:$Rm, imm0_7_neg:$imm3))]> { | |
| bits<3> imm3; | |
| let Inst{8-6} = imm3; | |
| } | |
| def tSUBi8 : // A8.6.210 T2 | |
| T1sItGenEncodeImm<{1,1,1,?,?}, (outs tGPR:$Rdn), | |
| (ins tGPR:$Rn, imm0_255:$imm8), IIC_iALUi, | |
| "sub", "\t$Rdn, $imm8", | |
| [(set tGPR:$Rdn, (add tGPR:$Rn, imm8_255_neg:$imm8))]>; | |
| // Subtract register | |
| def tSUBrr : // A8.6.212 | |
| T1sIGenEncode<0b01101, (outs tGPR:$Rd), (ins tGPR:$Rn, tGPR:$Rm), | |
| IIC_iALUr, | |
| "sub", "\t$Rd, $Rn, $Rm", | |
| [(set tGPR:$Rd, (sub tGPR:$Rn, tGPR:$Rm))]>; | |
| // Sign-extend byte | |
| def tSXTB : // A8.6.222 | |
| T1pIMiscEncode<{0,0,1,0,0,1,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "sxtb", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (sext_inreg tGPR:$Rm, i8))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| // Sign-extend short | |
| def tSXTH : // A8.6.224 | |
| T1pIMiscEncode<{0,0,1,0,0,0,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "sxth", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (sext_inreg tGPR:$Rm, i16))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| // Test | |
| let isCompare = 1, isCommutable = 1, Defs = [CPSR] in | |
| def tTST : // A8.6.230 | |
| T1pIDPEncode<0b1000, (outs), (ins tGPR:$Rn, tGPR:$Rm), IIC_iTSTr, | |
| "tst", "\t$Rn, $Rm", | |
| [(ARMcmpZ (and_su tGPR:$Rn, tGPR:$Rm), 0)]>; | |
| // Zero-extend byte | |
| def tUXTB : // A8.6.262 | |
| T1pIMiscEncode<{0,0,1,0,1,1,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "uxtb", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (and tGPR:$Rm, 0xFF))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| // Zero-extend short | |
| def tUXTH : // A8.6.264 | |
| T1pIMiscEncode<{0,0,1,0,1,0,?}, (outs tGPR:$Rd), (ins tGPR:$Rm), | |
| IIC_iUNAr, | |
| "uxth", "\t$Rd, $Rm", | |
| [(set tGPR:$Rd, (and tGPR:$Rm, 0xFFFF))]>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| // Conditional move tMOVCCr - Used to implement the Thumb SELECT_CC operation. | |
| // Expanded after instruction selection into a branch sequence. | |
| let usesCustomInserter = 1 in // Expanded after instruction selection. | |
| def tMOVCCr_pseudo : | |
| PseudoInst<(outs tGPR:$dst), (ins tGPR:$false, tGPR:$true, pred:$cc), | |
| NoItinerary, | |
| [/*(set tGPR:$dst, (ARMcmov tGPR:$false, tGPR:$true, imm:$cc))*/]>; | |
| // tLEApcrel - Load a pc-relative address into a register without offending the | |
| // assembler. | |
| def tADR : T1I<(outs tGPR:$Rd), (ins t_adrlabel:$addr, pred:$p), | |
| IIC_iALUi, "adr{$p}\t$Rd, $addr", []>, | |
| T1Encoding<{1,0,1,0,0,?}> { | |
| bits<3> Rd; | |
| bits<8> addr; | |
| let Inst{10-8} = Rd; | |
| let Inst{7-0} = addr; | |
| let DecoderMethod = "DecodeThumbAddSpecialReg"; | |
| } | |
| let neverHasSideEffects = 1, isReMaterializable = 1 in | |
| def tLEApcrel : tPseudoInst<(outs tGPR:$Rd), (ins i32imm:$label, pred:$p), | |
| 2, IIC_iALUi, []>; | |
| def tLEApcrelJT : tPseudoInst<(outs tGPR:$Rd), | |
| (ins i32imm:$label, nohash_imm:$id, pred:$p), | |
| 2, IIC_iALUi, []>; | |
| //===----------------------------------------------------------------------===// | |
| // TLS Instructions | |
| // | |
| // __aeabi_read_tp preserves the registers r1-r3. | |
| // This is a pseudo inst so that we can get the encoding right, | |
| // complete with fixup for the aeabi_read_tp function. | |
| let isCall = 1, Defs = [R0, R12, LR, CPSR], Uses = [SP] in | |
| def tTPsoft : tPseudoInst<(outs), (ins), 4, IIC_Br, | |
| [(set R0, ARMthread_pointer)]>; | |
| //===----------------------------------------------------------------------===// | |
| // SJLJ Exception handling intrinsics | |
| // | |
| // eh_sjlj_setjmp() is an instruction sequence to store the return address and | |
| // save #0 in R0 for the non-longjmp case. Since by its nature we may be coming | |
| // from some other function to get here, and we're using the stack frame for the | |
| // containing function to save/restore registers, we can't keep anything live in | |
| // regs across the eh_sjlj_setjmp(), else it will almost certainly have been | |
| // tromped upon when we get here from a longjmp(). We force everything out of | |
| // registers except for our own input by listing the relevant registers in | |
| // Defs. By doing so, we also cause the prologue/epilogue code to actively | |
| // preserve all of the callee-saved resgisters, which is exactly what we want. | |
| // $val is a scratch register for our use. | |
| let Defs = [ R0, R1, R2, R3, R4, R5, R6, R7, R12, CPSR ], | |
| hasSideEffects = 1, isBarrier = 1, isCodeGenOnly = 1 in | |
| def tInt_eh_sjlj_setjmp : ThumbXI<(outs),(ins tGPR:$src, tGPR:$val), | |
| AddrModeNone, 0, NoItinerary, "","", | |
| [(set R0, (ARMeh_sjlj_setjmp tGPR:$src, tGPR:$val))]>; | |
| // FIXME: Non-Darwin version(s) | |
| let isBarrier = 1, hasSideEffects = 1, isTerminator = 1, isCodeGenOnly = 1, | |
| Defs = [ R7, LR, SP ] in | |
| def tInt_eh_sjlj_longjmp : XI<(outs), (ins GPR:$src, GPR:$scratch), | |
| AddrModeNone, 0, IndexModeNone, | |
| Pseudo, NoItinerary, "", "", | |
| [(ARMeh_sjlj_longjmp GPR:$src, GPR:$scratch)]>, | |
| Requires<[IsThumb, IsDarwin]>; | |
| //===----------------------------------------------------------------------===// | |
| // Non-Instruction Patterns | |
| // | |
| // Comparisons | |
| def : T1Pat<(ARMcmpZ tGPR:$Rn, imm0_255:$imm8), | |
| (tCMPi8 tGPR:$Rn, imm0_255:$imm8)>; | |
| def : T1Pat<(ARMcmpZ tGPR:$Rn, tGPR:$Rm), | |
| (tCMPr tGPR:$Rn, tGPR:$Rm)>; | |
| // Add with carry | |
| def : T1Pat<(addc tGPR:$lhs, imm0_7:$rhs), | |
| (tADDi3 tGPR:$lhs, imm0_7:$rhs)>; | |
| def : T1Pat<(addc tGPR:$lhs, imm8_255:$rhs), | |
| (tADDi8 tGPR:$lhs, imm8_255:$rhs)>; | |
| def : T1Pat<(addc tGPR:$lhs, tGPR:$rhs), | |
| (tADDrr tGPR:$lhs, tGPR:$rhs)>; | |
| // Subtract with carry | |
| def : T1Pat<(addc tGPR:$lhs, imm0_7_neg:$rhs), | |
| (tSUBi3 tGPR:$lhs, imm0_7_neg:$rhs)>; | |
| def : T1Pat<(addc tGPR:$lhs, imm8_255_neg:$rhs), | |
| (tSUBi8 tGPR:$lhs, imm8_255_neg:$rhs)>; | |
| def : T1Pat<(subc tGPR:$lhs, tGPR:$rhs), | |
| (tSUBrr tGPR:$lhs, tGPR:$rhs)>; | |
| // ConstantPool, GlobalAddress | |
| def : T1Pat<(ARMWrapper tglobaladdr :$dst), (tLEApcrel tglobaladdr :$dst)>; | |
| def : T1Pat<(ARMWrapper tconstpool :$dst), (tLEApcrel tconstpool :$dst)>; | |
| // JumpTable | |
| def : T1Pat<(ARMWrapperJT tjumptable:$dst, imm:$id), | |
| (tLEApcrelJT tjumptable:$dst, imm:$id)>; | |
| // Direct calls | |
| def : T1Pat<(ARMtcall texternalsym:$func), (tBL texternalsym:$func)>, | |
| Requires<[IsThumb, IsNotDarwin]>; | |
| def : T1Pat<(ARMtcall texternalsym:$func), (tBLr9 texternalsym:$func)>, | |
| Requires<[IsThumb, IsDarwin]>; | |
| def : Tv5Pat<(ARMcall texternalsym:$func), (tBLXi texternalsym:$func)>, | |
| Requires<[IsThumb, HasV5T, IsNotDarwin]>; | |
| def : Tv5Pat<(ARMcall texternalsym:$func), (tBLXi_r9 texternalsym:$func)>, | |
| Requires<[IsThumb, HasV5T, IsDarwin]>; | |
| // Indirect calls to ARM routines | |
| def : Tv5Pat<(ARMcall GPR:$dst), (tBLXr GPR:$dst)>, | |
| Requires<[IsThumb, HasV5T, IsNotDarwin]>; | |
| def : Tv5Pat<(ARMcall GPR:$dst), (tBLXr_r9 GPR:$dst)>, | |
| Requires<[IsThumb, HasV5T, IsDarwin]>; | |
| // zextload i1 -> zextload i8 | |
| def : T1Pat<(zextloadi1 t_addrmode_rrs1:$addr), | |
| (tLDRBr t_addrmode_rrs1:$addr)>; | |
| def : T1Pat<(zextloadi1 t_addrmode_is1:$addr), | |
| (tLDRBi t_addrmode_is1:$addr)>; | |
| // extload -> zextload | |
| def : T1Pat<(extloadi1 t_addrmode_rrs1:$addr), (tLDRBr t_addrmode_rrs1:$addr)>; | |
| def : T1Pat<(extloadi1 t_addrmode_is1:$addr), (tLDRBi t_addrmode_is1:$addr)>; | |
| def : T1Pat<(extloadi8 t_addrmode_rrs1:$addr), (tLDRBr t_addrmode_rrs1:$addr)>; | |
| def : T1Pat<(extloadi8 t_addrmode_is1:$addr), (tLDRBi t_addrmode_is1:$addr)>; | |
| def : T1Pat<(extloadi16 t_addrmode_rrs2:$addr), (tLDRHr t_addrmode_rrs2:$addr)>; | |
| def : T1Pat<(extloadi16 t_addrmode_is2:$addr), (tLDRHi t_addrmode_is2:$addr)>; | |
| // If it's impossible to use [r,r] address mode for sextload, select to | |
| // ldr{b|h} + sxt{b|h} instead. | |
| def : T1Pat<(sextloadi8 t_addrmode_is1:$addr), | |
| (tSXTB (tLDRBi t_addrmode_is1:$addr))>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def : T1Pat<(sextloadi8 t_addrmode_rrs1:$addr), | |
| (tSXTB (tLDRBr t_addrmode_rrs1:$addr))>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def : T1Pat<(sextloadi16 t_addrmode_is2:$addr), | |
| (tSXTH (tLDRHi t_addrmode_is2:$addr))>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def : T1Pat<(sextloadi16 t_addrmode_rrs2:$addr), | |
| (tSXTH (tLDRHr t_addrmode_rrs2:$addr))>, | |
| Requires<[IsThumb, IsThumb1Only, HasV6]>; | |
| def : T1Pat<(sextloadi8 t_addrmode_rrs1:$addr), | |
| (tASRri (tLSLri (tLDRBr t_addrmode_rrs1:$addr), 24), 24)>; | |
| def : T1Pat<(sextloadi8 t_addrmode_is1:$addr), | |
| (tASRri (tLSLri (tLDRBi t_addrmode_is1:$addr), 24), 24)>; | |
| def : T1Pat<(sextloadi16 t_addrmode_rrs2:$addr), | |
| (tASRri (tLSLri (tLDRHr t_addrmode_rrs2:$addr), 16), 16)>; | |
| def : T1Pat<(sextloadi16 t_addrmode_is2:$addr), | |
| (tASRri (tLSLri (tLDRHi t_addrmode_is2:$addr), 16), 16)>; | |
| def : T1Pat<(atomic_load_8 t_addrmode_is1:$src), | |
| (tLDRBi t_addrmode_is1:$src)>; | |
| def : T1Pat<(atomic_load_8 t_addrmode_rrs1:$src), | |
| (tLDRBr t_addrmode_rrs1:$src)>; | |
| def : T1Pat<(atomic_load_16 t_addrmode_is2:$src), | |
| (tLDRHi t_addrmode_is2:$src)>; | |
| def : T1Pat<(atomic_load_16 t_addrmode_rrs2:$src), | |
| (tLDRHr t_addrmode_rrs2:$src)>; | |
| def : T1Pat<(atomic_load_32 t_addrmode_is4:$src), | |
| (tLDRi t_addrmode_is4:$src)>; | |
| def : T1Pat<(atomic_load_32 t_addrmode_rrs4:$src), | |
| (tLDRr t_addrmode_rrs4:$src)>; | |
| def : T1Pat<(atomic_store_8 t_addrmode_is1:$ptr, tGPR:$val), | |
| (tSTRBi tGPR:$val, t_addrmode_is1:$ptr)>; | |
| def : T1Pat<(atomic_store_8 t_addrmode_rrs1:$ptr, tGPR:$val), | |
| (tSTRBr tGPR:$val, t_addrmode_rrs1:$ptr)>; | |
| def : T1Pat<(atomic_store_16 t_addrmode_is2:$ptr, tGPR:$val), | |
| (tSTRHi tGPR:$val, t_addrmode_is2:$ptr)>; | |
| def : T1Pat<(atomic_store_16 t_addrmode_rrs2:$ptr, tGPR:$val), | |
| (tSTRHr tGPR:$val, t_addrmode_rrs2:$ptr)>; | |
| def : T1Pat<(atomic_store_32 t_addrmode_is4:$ptr, tGPR:$val), | |
| (tSTRi tGPR:$val, t_addrmode_is4:$ptr)>; | |
| def : T1Pat<(atomic_store_32 t_addrmode_rrs4:$ptr, tGPR:$val), | |
| (tSTRr tGPR:$val, t_addrmode_rrs4:$ptr)>; | |
| // Large immediate handling. | |
| // Two piece imms. | |
| def : T1Pat<(i32 thumb_immshifted:$src), | |
| (tLSLri (tMOVi8 (thumb_immshifted_val imm:$src)), | |
| (thumb_immshifted_shamt imm:$src))>; | |
| def : T1Pat<(i32 imm0_255_comp:$src), | |
| (tMVN (tMOVi8 (imm_comp_XFORM imm:$src)))>; | |
| // Pseudo instruction that combines ldr from constpool and add pc. This should | |
| // be expanded into two instructions late to allow if-conversion and | |
| // scheduling. | |
| let isReMaterializable = 1 in | |
| def tLDRpci_pic : PseudoInst<(outs GPR:$dst), (ins i32imm:$addr, pclabel:$cp), | |
| NoItinerary, | |
| [(set GPR:$dst, (ARMpic_add (load (ARMWrapper tconstpool:$addr)), | |
| imm:$cp))]>, | |
| Requires<[IsThumb, IsThumb1Only]>; | |
| // Pseudo-instruction for merged POP and return. | |
| // FIXME: remove when we have a way to marking a MI with these properties. | |
| let isReturn = 1, isTerminator = 1, isBarrier = 1, mayLoad = 1, | |
| hasExtraDefRegAllocReq = 1 in | |
| def tPOP_RET : tPseudoExpand<(outs), (ins pred:$p, reglist:$regs, variable_ops), | |
| 2, IIC_iPop_Br, [], | |
| (tPOP pred:$p, reglist:$regs)>; | |
| // Indirect branch using "mov pc, $Rm" | |
| let isBranch = 1, isTerminator = 1, isBarrier = 1, isIndirectBranch = 1 in { | |
| def tBRIND : tPseudoExpand<(outs), (ins GPR:$Rm, pred:$p), | |
| 2, IIC_Br, [(brind GPR:$Rm)], | |
| (tMOVr PC, GPR:$Rm, pred:$p)>; | |
| } | |
| // In Thumb1, "nop" is encoded as a "mov r8, r8". Technically, the bf00 | |
| // encoding is available on ARMv6K, but we don't differentiate that finely. | |
| def : InstAlias<"nop", (tMOVr R8, R8, 14, 0)>,Requires<[IsThumb, IsThumb1Only]>; | |
| // For round-trip assembly/disassembly, we have to handle a CPS instruction | |
| // without any iflags. That's not, strictly speaking, valid syntax, but it's | |
| // a useful extention and assembles to defined behaviour (the insn does | |
| // nothing). | |
| def : tInstAlias<"cps$imod", (tCPS imod_op:$imod, 0)>; | |
| def : tInstAlias<"cps$imod", (tCPS imod_op:$imod, 0)>; |