| //===-- APFloat.cpp - Implement APFloat class -----------------------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements a class to represent arbitrary precision floating | |
| // point values and provide a variety of arithmetic operations on them. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/ADT/APFloat.h" | |
| #include "llvm/ADT/APSInt.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/ADT/FoldingSet.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| #include "llvm/Support/MathExtras.h" | |
| #include <limits.h> | |
| #include <cstring> | |
| using namespace llvm; | |
| #define convolve(lhs, rhs) ((lhs) * 4 + (rhs)) | |
| /* Assumed in hexadecimal significand parsing, and conversion to | |
| hexadecimal strings. */ | |
| #define COMPILE_TIME_ASSERT(cond) extern int CTAssert[(cond) ? 1 : -1] | |
| COMPILE_TIME_ASSERT(integerPartWidth % 4 == 0); | |
| namespace llvm { | |
| /* Represents floating point arithmetic semantics. */ | |
| struct fltSemantics { | |
| /* The largest E such that 2^E is representable; this matches the | |
| definition of IEEE 754. */ | |
| exponent_t maxExponent; | |
| /* The smallest E such that 2^E is a normalized number; this | |
| matches the definition of IEEE 754. */ | |
| exponent_t minExponent; | |
| /* Number of bits in the significand. This includes the integer | |
| bit. */ | |
| unsigned int precision; | |
| /* True if arithmetic is supported. */ | |
| unsigned int arithmeticOK; | |
| }; | |
| const fltSemantics APFloat::IEEEhalf = { 15, -14, 11, true }; | |
| const fltSemantics APFloat::IEEEsingle = { 127, -126, 24, true }; | |
| const fltSemantics APFloat::IEEEdouble = { 1023, -1022, 53, true }; | |
| const fltSemantics APFloat::IEEEquad = { 16383, -16382, 113, true }; | |
| const fltSemantics APFloat::x87DoubleExtended = { 16383, -16382, 64, true }; | |
| const fltSemantics APFloat::Bogus = { 0, 0, 0, true }; | |
| // The PowerPC format consists of two doubles. It does not map cleanly | |
| // onto the usual format above. For now only storage of constants of | |
| // this type is supported, no arithmetic. | |
| const fltSemantics APFloat::PPCDoubleDouble = { 1023, -1022, 106, false }; | |
| /* A tight upper bound on number of parts required to hold the value | |
| pow(5, power) is | |
| power * 815 / (351 * integerPartWidth) + 1 | |
| However, whilst the result may require only this many parts, | |
| because we are multiplying two values to get it, the | |
| multiplication may require an extra part with the excess part | |
| being zero (consider the trivial case of 1 * 1, tcFullMultiply | |
| requires two parts to hold the single-part result). So we add an | |
| extra one to guarantee enough space whilst multiplying. */ | |
| const unsigned int maxExponent = 16383; | |
| const unsigned int maxPrecision = 113; | |
| const unsigned int maxPowerOfFiveExponent = maxExponent + maxPrecision - 1; | |
| const unsigned int maxPowerOfFiveParts = 2 + ((maxPowerOfFiveExponent * 815) | |
| / (351 * integerPartWidth)); | |
| } | |
| /* A bunch of private, handy routines. */ | |
| static inline unsigned int | |
| partCountForBits(unsigned int bits) | |
| { | |
| return ((bits) + integerPartWidth - 1) / integerPartWidth; | |
| } | |
| /* Returns 0U-9U. Return values >= 10U are not digits. */ | |
| static inline unsigned int | |
| decDigitValue(unsigned int c) | |
| { | |
| return c - '0'; | |
| } | |
| static unsigned int | |
| hexDigitValue(unsigned int c) | |
| { | |
| unsigned int r; | |
| r = c - '0'; | |
| if (r <= 9) | |
| return r; | |
| r = c - 'A'; | |
| if (r <= 5) | |
| return r + 10; | |
| r = c - 'a'; | |
| if (r <= 5) | |
| return r + 10; | |
| return -1U; | |
| } | |
| static inline void | |
| assertArithmeticOK(const llvm::fltSemantics &semantics) { | |
| assert(semantics.arithmeticOK && | |
| "Compile-time arithmetic does not support these semantics"); | |
| } | |
| /* Return the value of a decimal exponent of the form | |
| [+-]ddddddd. | |
| If the exponent overflows, returns a large exponent with the | |
| appropriate sign. */ | |
| static int | |
| readExponent(StringRef::iterator begin, StringRef::iterator end) | |
| { | |
| bool isNegative; | |
| unsigned int absExponent; | |
| const unsigned int overlargeExponent = 24000; /* FIXME. */ | |
| StringRef::iterator p = begin; | |
| assert(p != end && "Exponent has no digits"); | |
| isNegative = (*p == '-'); | |
| if (*p == '-' || *p == '+') { | |
| p++; | |
| assert(p != end && "Exponent has no digits"); | |
| } | |
| absExponent = decDigitValue(*p++); | |
| assert(absExponent < 10U && "Invalid character in exponent"); | |
| for (; p != end; ++p) { | |
| unsigned int value; | |
| value = decDigitValue(*p); | |
| assert(value < 10U && "Invalid character in exponent"); | |
| value += absExponent * 10; | |
| if (absExponent >= overlargeExponent) { | |
| absExponent = overlargeExponent; | |
| p = end; /* outwit assert below */ | |
| break; | |
| } | |
| absExponent = value; | |
| } | |
| assert(p == end && "Invalid exponent in exponent"); | |
| if (isNegative) | |
| return -(int) absExponent; | |
| else | |
| return (int) absExponent; | |
| } | |
| /* This is ugly and needs cleaning up, but I don't immediately see | |
| how whilst remaining safe. */ | |
| static int | |
| totalExponent(StringRef::iterator p, StringRef::iterator end, | |
| int exponentAdjustment) | |
| { | |
| int unsignedExponent; | |
| bool negative, overflow; | |
| int exponent = 0; | |
| assert(p != end && "Exponent has no digits"); | |
| negative = *p == '-'; | |
| if (*p == '-' || *p == '+') { | |
| p++; | |
| assert(p != end && "Exponent has no digits"); | |
| } | |
| unsignedExponent = 0; | |
| overflow = false; | |
| for (; p != end; ++p) { | |
| unsigned int value; | |
| value = decDigitValue(*p); | |
| assert(value < 10U && "Invalid character in exponent"); | |
| unsignedExponent = unsignedExponent * 10 + value; | |
| if (unsignedExponent > 32767) | |
| overflow = true; | |
| } | |
| if (exponentAdjustment > 32767 || exponentAdjustment < -32768) | |
| overflow = true; | |
| if (!overflow) { | |
| exponent = unsignedExponent; | |
| if (negative) | |
| exponent = -exponent; | |
| exponent += exponentAdjustment; | |
| if (exponent > 32767 || exponent < -32768) | |
| overflow = true; | |
| } | |
| if (overflow) | |
| exponent = negative ? -32768: 32767; | |
| return exponent; | |
| } | |
| static StringRef::iterator | |
| skipLeadingZeroesAndAnyDot(StringRef::iterator begin, StringRef::iterator end, | |
| StringRef::iterator *dot) | |
| { | |
| StringRef::iterator p = begin; | |
| *dot = end; | |
| while (*p == '0' && p != end) | |
| p++; | |
| if (*p == '.') { | |
| *dot = p++; | |
| assert(end - begin != 1 && "Significand has no digits"); | |
| while (*p == '0' && p != end) | |
| p++; | |
| } | |
| return p; | |
| } | |
| /* Given a normal decimal floating point number of the form | |
| dddd.dddd[eE][+-]ddd | |
| where the decimal point and exponent are optional, fill out the | |
| structure D. Exponent is appropriate if the significand is | |
| treated as an integer, and normalizedExponent if the significand | |
| is taken to have the decimal point after a single leading | |
| non-zero digit. | |
| If the value is zero, V->firstSigDigit points to a non-digit, and | |
| the return exponent is zero. | |
| */ | |
| struct decimalInfo { | |
| const char *firstSigDigit; | |
| const char *lastSigDigit; | |
| int exponent; | |
| int normalizedExponent; | |
| }; | |
| static void | |
| interpretDecimal(StringRef::iterator begin, StringRef::iterator end, | |
| decimalInfo *D) | |
| { | |
| StringRef::iterator dot = end; | |
| StringRef::iterator p = skipLeadingZeroesAndAnyDot (begin, end, &dot); | |
| D->firstSigDigit = p; | |
| D->exponent = 0; | |
| D->normalizedExponent = 0; | |
| for (; p != end; ++p) { | |
| if (*p == '.') { | |
| assert(dot == end && "String contains multiple dots"); | |
| dot = p++; | |
| if (p == end) | |
| break; | |
| } | |
| if (decDigitValue(*p) >= 10U) | |
| break; | |
| } | |
| if (p != end) { | |
| assert((*p == 'e' || *p == 'E') && "Invalid character in significand"); | |
| assert(p != begin && "Significand has no digits"); | |
| assert((dot == end || p - begin != 1) && "Significand has no digits"); | |
| /* p points to the first non-digit in the string */ | |
| D->exponent = readExponent(p + 1, end); | |
| /* Implied decimal point? */ | |
| if (dot == end) | |
| dot = p; | |
| } | |
| /* If number is all zeroes accept any exponent. */ | |
| if (p != D->firstSigDigit) { | |
| /* Drop insignificant trailing zeroes. */ | |
| if (p != begin) { | |
| do | |
| do | |
| p--; | |
| while (p != begin && *p == '0'); | |
| while (p != begin && *p == '.'); | |
| } | |
| /* Adjust the exponents for any decimal point. */ | |
| D->exponent += static_cast<exponent_t>((dot - p) - (dot > p)); | |
| D->normalizedExponent = (D->exponent + | |
| static_cast<exponent_t>((p - D->firstSigDigit) | |
| - (dot > D->firstSigDigit && dot < p))); | |
| } | |
| D->lastSigDigit = p; | |
| } | |
| /* Return the trailing fraction of a hexadecimal number. | |
| DIGITVALUE is the first hex digit of the fraction, P points to | |
| the next digit. */ | |
| static lostFraction | |
| trailingHexadecimalFraction(StringRef::iterator p, StringRef::iterator end, | |
| unsigned int digitValue) | |
| { | |
| unsigned int hexDigit; | |
| /* If the first trailing digit isn't 0 or 8 we can work out the | |
| fraction immediately. */ | |
| if (digitValue > 8) | |
| return lfMoreThanHalf; | |
| else if (digitValue < 8 && digitValue > 0) | |
| return lfLessThanHalf; | |
| /* Otherwise we need to find the first non-zero digit. */ | |
| while (*p == '0') | |
| p++; | |
| assert(p != end && "Invalid trailing hexadecimal fraction!"); | |
| hexDigit = hexDigitValue(*p); | |
| /* If we ran off the end it is exactly zero or one-half, otherwise | |
| a little more. */ | |
| if (hexDigit == -1U) | |
| return digitValue == 0 ? lfExactlyZero: lfExactlyHalf; | |
| else | |
| return digitValue == 0 ? lfLessThanHalf: lfMoreThanHalf; | |
| } | |
| /* Return the fraction lost were a bignum truncated losing the least | |
| significant BITS bits. */ | |
| static lostFraction | |
| lostFractionThroughTruncation(const integerPart *parts, | |
| unsigned int partCount, | |
| unsigned int bits) | |
| { | |
| unsigned int lsb; | |
| lsb = APInt::tcLSB(parts, partCount); | |
| /* Note this is guaranteed true if bits == 0, or LSB == -1U. */ | |
| if (bits <= lsb) | |
| return lfExactlyZero; | |
| if (bits == lsb + 1) | |
| return lfExactlyHalf; | |
| if (bits <= partCount * integerPartWidth && | |
| APInt::tcExtractBit(parts, bits - 1)) | |
| return lfMoreThanHalf; | |
| return lfLessThanHalf; | |
| } | |
| /* Shift DST right BITS bits noting lost fraction. */ | |
| static lostFraction | |
| shiftRight(integerPart *dst, unsigned int parts, unsigned int bits) | |
| { | |
| lostFraction lost_fraction; | |
| lost_fraction = lostFractionThroughTruncation(dst, parts, bits); | |
| APInt::tcShiftRight(dst, parts, bits); | |
| return lost_fraction; | |
| } | |
| /* Combine the effect of two lost fractions. */ | |
| static lostFraction | |
| combineLostFractions(lostFraction moreSignificant, | |
| lostFraction lessSignificant) | |
| { | |
| if (lessSignificant != lfExactlyZero) { | |
| if (moreSignificant == lfExactlyZero) | |
| moreSignificant = lfLessThanHalf; | |
| else if (moreSignificant == lfExactlyHalf) | |
| moreSignificant = lfMoreThanHalf; | |
| } | |
| return moreSignificant; | |
| } | |
| /* The error from the true value, in half-ulps, on multiplying two | |
| floating point numbers, which differ from the value they | |
| approximate by at most HUE1 and HUE2 half-ulps, is strictly less | |
| than the returned value. | |
| See "How to Read Floating Point Numbers Accurately" by William D | |
| Clinger. */ | |
| static unsigned int | |
| HUerrBound(bool inexactMultiply, unsigned int HUerr1, unsigned int HUerr2) | |
| { | |
| assert(HUerr1 < 2 || HUerr2 < 2 || (HUerr1 + HUerr2 < 8)); | |
| if (HUerr1 + HUerr2 == 0) | |
| return inexactMultiply * 2; /* <= inexactMultiply half-ulps. */ | |
| else | |
| return inexactMultiply + 2 * (HUerr1 + HUerr2); | |
| } | |
| /* The number of ulps from the boundary (zero, or half if ISNEAREST) | |
| when the least significant BITS are truncated. BITS cannot be | |
| zero. */ | |
| static integerPart | |
| ulpsFromBoundary(const integerPart *parts, unsigned int bits, bool isNearest) | |
| { | |
| unsigned int count, partBits; | |
| integerPart part, boundary; | |
| assert(bits != 0); | |
| bits--; | |
| count = bits / integerPartWidth; | |
| partBits = bits % integerPartWidth + 1; | |
| part = parts[count] & (~(integerPart) 0 >> (integerPartWidth - partBits)); | |
| if (isNearest) | |
| boundary = (integerPart) 1 << (partBits - 1); | |
| else | |
| boundary = 0; | |
| if (count == 0) { | |
| if (part - boundary <= boundary - part) | |
| return part - boundary; | |
| else | |
| return boundary - part; | |
| } | |
| if (part == boundary) { | |
| while (--count) | |
| if (parts[count]) | |
| return ~(integerPart) 0; /* A lot. */ | |
| return parts[0]; | |
| } else if (part == boundary - 1) { | |
| while (--count) | |
| if (~parts[count]) | |
| return ~(integerPart) 0; /* A lot. */ | |
| return -parts[0]; | |
| } | |
| return ~(integerPart) 0; /* A lot. */ | |
| } | |
| /* Place pow(5, power) in DST, and return the number of parts used. | |
| DST must be at least one part larger than size of the answer. */ | |
| static unsigned int | |
| powerOf5(integerPart *dst, unsigned int power) | |
| { | |
| static const integerPart firstEightPowers[] = { 1, 5, 25, 125, 625, 3125, | |
| 15625, 78125 }; | |
| integerPart pow5s[maxPowerOfFiveParts * 2 + 5]; | |
| pow5s[0] = 78125 * 5; | |
| unsigned int partsCount[16] = { 1 }; | |
| integerPart scratch[maxPowerOfFiveParts], *p1, *p2, *pow5; | |
| unsigned int result; | |
| assert(power <= maxExponent); | |
| p1 = dst; | |
| p2 = scratch; | |
| *p1 = firstEightPowers[power & 7]; | |
| power >>= 3; | |
| result = 1; | |
| pow5 = pow5s; | |
| for (unsigned int n = 0; power; power >>= 1, n++) { | |
| unsigned int pc; | |
| pc = partsCount[n]; | |
| /* Calculate pow(5,pow(2,n+3)) if we haven't yet. */ | |
| if (pc == 0) { | |
| pc = partsCount[n - 1]; | |
| APInt::tcFullMultiply(pow5, pow5 - pc, pow5 - pc, pc, pc); | |
| pc *= 2; | |
| if (pow5[pc - 1] == 0) | |
| pc--; | |
| partsCount[n] = pc; | |
| } | |
| if (power & 1) { | |
| integerPart *tmp; | |
| APInt::tcFullMultiply(p2, p1, pow5, result, pc); | |
| result += pc; | |
| if (p2[result - 1] == 0) | |
| result--; | |
| /* Now result is in p1 with partsCount parts and p2 is scratch | |
| space. */ | |
| tmp = p1, p1 = p2, p2 = tmp; | |
| } | |
| pow5 += pc; | |
| } | |
| if (p1 != dst) | |
| APInt::tcAssign(dst, p1, result); | |
| return result; | |
| } | |
| /* Zero at the end to avoid modular arithmetic when adding one; used | |
| when rounding up during hexadecimal output. */ | |
| static const char hexDigitsLower[] = "0123456789abcdef0"; | |
| static const char hexDigitsUpper[] = "0123456789ABCDEF0"; | |
| static const char infinityL[] = "infinity"; | |
| static const char infinityU[] = "INFINITY"; | |
| static const char NaNL[] = "nan"; | |
| static const char NaNU[] = "NAN"; | |
| /* Write out an integerPart in hexadecimal, starting with the most | |
| significant nibble. Write out exactly COUNT hexdigits, return | |
| COUNT. */ | |
| static unsigned int | |
| partAsHex (char *dst, integerPart part, unsigned int count, | |
| const char *hexDigitChars) | |
| { | |
| unsigned int result = count; | |
| assert(count != 0 && count <= integerPartWidth / 4); | |
| part >>= (integerPartWidth - 4 * count); | |
| while (count--) { | |
| dst[count] = hexDigitChars[part & 0xf]; | |
| part >>= 4; | |
| } | |
| return result; | |
| } | |
| /* Write out an unsigned decimal integer. */ | |
| static char * | |
| writeUnsignedDecimal (char *dst, unsigned int n) | |
| { | |
| char buff[40], *p; | |
| p = buff; | |
| do | |
| *p++ = '0' + n % 10; | |
| while (n /= 10); | |
| do | |
| *dst++ = *--p; | |
| while (p != buff); | |
| return dst; | |
| } | |
| /* Write out a signed decimal integer. */ | |
| static char * | |
| writeSignedDecimal (char *dst, int value) | |
| { | |
| if (value < 0) { | |
| *dst++ = '-'; | |
| dst = writeUnsignedDecimal(dst, -(unsigned) value); | |
| } else | |
| dst = writeUnsignedDecimal(dst, value); | |
| return dst; | |
| } | |
| /* Constructors. */ | |
| void | |
| APFloat::initialize(const fltSemantics *ourSemantics) | |
| { | |
| unsigned int count; | |
| semantics = ourSemantics; | |
| count = partCount(); | |
| if (count > 1) | |
| significand.parts = new integerPart[count]; | |
| } | |
| void | |
| APFloat::freeSignificand() | |
| { | |
| if (partCount() > 1) | |
| delete [] significand.parts; | |
| } | |
| void | |
| APFloat::assign(const APFloat &rhs) | |
| { | |
| assert(semantics == rhs.semantics); | |
| sign = rhs.sign; | |
| category = rhs.category; | |
| exponent = rhs.exponent; | |
| sign2 = rhs.sign2; | |
| exponent2 = rhs.exponent2; | |
| if (category == fcNormal || category == fcNaN) | |
| copySignificand(rhs); | |
| } | |
| void | |
| APFloat::copySignificand(const APFloat &rhs) | |
| { | |
| assert(category == fcNormal || category == fcNaN); | |
| assert(rhs.partCount() >= partCount()); | |
| APInt::tcAssign(significandParts(), rhs.significandParts(), | |
| partCount()); | |
| } | |
| /* Make this number a NaN, with an arbitrary but deterministic value | |
| for the significand. If double or longer, this is a signalling NaN, | |
| which may not be ideal. If float, this is QNaN(0). */ | |
| void APFloat::makeNaN(bool SNaN, bool Negative, const APInt *fill) | |
| { | |
| category = fcNaN; | |
| sign = Negative; | |
| integerPart *significand = significandParts(); | |
| unsigned numParts = partCount(); | |
| // Set the significand bits to the fill. | |
| if (!fill || fill->getNumWords() < numParts) | |
| APInt::tcSet(significand, 0, numParts); | |
| if (fill) { | |
| APInt::tcAssign(significand, fill->getRawData(), | |
| std::min(fill->getNumWords(), numParts)); | |
| // Zero out the excess bits of the significand. | |
| unsigned bitsToPreserve = semantics->precision - 1; | |
| unsigned part = bitsToPreserve / 64; | |
| bitsToPreserve %= 64; | |
| significand[part] &= ((1ULL << bitsToPreserve) - 1); | |
| for (part++; part != numParts; ++part) | |
| significand[part] = 0; | |
| } | |
| unsigned QNaNBit = semantics->precision - 2; | |
| if (SNaN) { | |
| // We always have to clear the QNaN bit to make it an SNaN. | |
| APInt::tcClearBit(significand, QNaNBit); | |
| // If there are no bits set in the payload, we have to set | |
| // *something* to make it a NaN instead of an infinity; | |
| // conventionally, this is the next bit down from the QNaN bit. | |
| if (APInt::tcIsZero(significand, numParts)) | |
| APInt::tcSetBit(significand, QNaNBit - 1); | |
| } else { | |
| // We always have to set the QNaN bit to make it a QNaN. | |
| APInt::tcSetBit(significand, QNaNBit); | |
| } | |
| // For x87 extended precision, we want to make a NaN, not a | |
| // pseudo-NaN. Maybe we should expose the ability to make | |
| // pseudo-NaNs? | |
| if (semantics == &APFloat::x87DoubleExtended) | |
| APInt::tcSetBit(significand, QNaNBit + 1); | |
| } | |
| APFloat APFloat::makeNaN(const fltSemantics &Sem, bool SNaN, bool Negative, | |
| const APInt *fill) { | |
| APFloat value(Sem, uninitialized); | |
| value.makeNaN(SNaN, Negative, fill); | |
| return value; | |
| } | |
| APFloat & | |
| APFloat::operator=(const APFloat &rhs) | |
| { | |
| if (this != &rhs) { | |
| if (semantics != rhs.semantics) { | |
| freeSignificand(); | |
| initialize(rhs.semantics); | |
| } | |
| assign(rhs); | |
| } | |
| return *this; | |
| } | |
| bool | |
| APFloat::bitwiseIsEqual(const APFloat &rhs) const { | |
| if (this == &rhs) | |
| return true; | |
| if (semantics != rhs.semantics || | |
| category != rhs.category || | |
| sign != rhs.sign) | |
| return false; | |
| if (semantics==(const llvm::fltSemantics*)&PPCDoubleDouble && | |
| sign2 != rhs.sign2) | |
| return false; | |
| if (category==fcZero || category==fcInfinity) | |
| return true; | |
| else if (category==fcNormal && exponent!=rhs.exponent) | |
| return false; | |
| else if (semantics==(const llvm::fltSemantics*)&PPCDoubleDouble && | |
| exponent2!=rhs.exponent2) | |
| return false; | |
| else { | |
| int i= partCount(); | |
| const integerPart* p=significandParts(); | |
| const integerPart* q=rhs.significandParts(); | |
| for (; i>0; i--, p++, q++) { | |
| if (*p != *q) | |
| return false; | |
| } | |
| return true; | |
| } | |
| } | |
| APFloat::APFloat(const fltSemantics &ourSemantics, integerPart value) | |
| : exponent2(0), sign2(0) { | |
| assertArithmeticOK(ourSemantics); | |
| initialize(&ourSemantics); | |
| sign = 0; | |
| zeroSignificand(); | |
| exponent = ourSemantics.precision - 1; | |
| significandParts()[0] = value; | |
| normalize(rmNearestTiesToEven, lfExactlyZero); | |
| } | |
| APFloat::APFloat(const fltSemantics &ourSemantics) : exponent2(0), sign2(0) { | |
| assertArithmeticOK(ourSemantics); | |
| initialize(&ourSemantics); | |
| category = fcZero; | |
| sign = false; | |
| } | |
| APFloat::APFloat(const fltSemantics &ourSemantics, uninitializedTag tag) | |
| : exponent2(0), sign2(0) { | |
| assertArithmeticOK(ourSemantics); | |
| // Allocates storage if necessary but does not initialize it. | |
| initialize(&ourSemantics); | |
| } | |
| APFloat::APFloat(const fltSemantics &ourSemantics, | |
| fltCategory ourCategory, bool negative) | |
| : exponent2(0), sign2(0) { | |
| assertArithmeticOK(ourSemantics); | |
| initialize(&ourSemantics); | |
| category = ourCategory; | |
| sign = negative; | |
| if (category == fcNormal) | |
| category = fcZero; | |
| else if (ourCategory == fcNaN) | |
| makeNaN(); | |
| } | |
| APFloat::APFloat(const fltSemantics &ourSemantics, StringRef text) | |
| : exponent2(0), sign2(0) { | |
| assertArithmeticOK(ourSemantics); | |
| initialize(&ourSemantics); | |
| convertFromString(text, rmNearestTiesToEven); | |
| } | |
| APFloat::APFloat(const APFloat &rhs) : exponent2(0), sign2(0) { | |
| initialize(rhs.semantics); | |
| assign(rhs); | |
| } | |
| APFloat::~APFloat() | |
| { | |
| freeSignificand(); | |
| } | |
| // Profile - This method 'profiles' an APFloat for use with FoldingSet. | |
| void APFloat::Profile(FoldingSetNodeID& ID) const { | |
| ID.Add(bitcastToAPInt()); | |
| } | |
| unsigned int | |
| APFloat::partCount() const | |
| { | |
| return partCountForBits(semantics->precision + 1); | |
| } | |
| unsigned int | |
| APFloat::semanticsPrecision(const fltSemantics &semantics) | |
| { | |
| return semantics.precision; | |
| } | |
| const integerPart * | |
| APFloat::significandParts() const | |
| { | |
| return const_cast<APFloat *>(this)->significandParts(); | |
| } | |
| integerPart * | |
| APFloat::significandParts() | |
| { | |
| assert(category == fcNormal || category == fcNaN); | |
| if (partCount() > 1) | |
| return significand.parts; | |
| else | |
| return &significand.part; | |
| } | |
| void | |
| APFloat::zeroSignificand() | |
| { | |
| category = fcNormal; | |
| APInt::tcSet(significandParts(), 0, partCount()); | |
| } | |
| /* Increment an fcNormal floating point number's significand. */ | |
| void | |
| APFloat::incrementSignificand() | |
| { | |
| integerPart carry; | |
| carry = APInt::tcIncrement(significandParts(), partCount()); | |
| /* Our callers should never cause us to overflow. */ | |
| assert(carry == 0); | |
| (void)carry; | |
| } | |
| /* Add the significand of the RHS. Returns the carry flag. */ | |
| integerPart | |
| APFloat::addSignificand(const APFloat &rhs) | |
| { | |
| integerPart *parts; | |
| parts = significandParts(); | |
| assert(semantics == rhs.semantics); | |
| assert(exponent == rhs.exponent); | |
| return APInt::tcAdd(parts, rhs.significandParts(), 0, partCount()); | |
| } | |
| /* Subtract the significand of the RHS with a borrow flag. Returns | |
| the borrow flag. */ | |
| integerPart | |
| APFloat::subtractSignificand(const APFloat &rhs, integerPart borrow) | |
| { | |
| integerPart *parts; | |
| parts = significandParts(); | |
| assert(semantics == rhs.semantics); | |
| assert(exponent == rhs.exponent); | |
| return APInt::tcSubtract(parts, rhs.significandParts(), borrow, | |
| partCount()); | |
| } | |
| /* Multiply the significand of the RHS. If ADDEND is non-NULL, add it | |
| on to the full-precision result of the multiplication. Returns the | |
| lost fraction. */ | |
| lostFraction | |
| APFloat::multiplySignificand(const APFloat &rhs, const APFloat *addend) | |
| { | |
| unsigned int omsb; // One, not zero, based MSB. | |
| unsigned int partsCount, newPartsCount, precision; | |
| integerPart *lhsSignificand; | |
| integerPart scratch[4]; | |
| integerPart *fullSignificand; | |
| lostFraction lost_fraction; | |
| bool ignored; | |
| assert(semantics == rhs.semantics); | |
| precision = semantics->precision; | |
| newPartsCount = partCountForBits(precision * 2); | |
| if (newPartsCount > 4) | |
| fullSignificand = new integerPart[newPartsCount]; | |
| else | |
| fullSignificand = scratch; | |
| lhsSignificand = significandParts(); | |
| partsCount = partCount(); | |
| APInt::tcFullMultiply(fullSignificand, lhsSignificand, | |
| rhs.significandParts(), partsCount, partsCount); | |
| lost_fraction = lfExactlyZero; | |
| omsb = APInt::tcMSB(fullSignificand, newPartsCount) + 1; | |
| exponent += rhs.exponent; | |
| if (addend) { | |
| Significand savedSignificand = significand; | |
| const fltSemantics *savedSemantics = semantics; | |
| fltSemantics extendedSemantics; | |
| opStatus status; | |
| unsigned int extendedPrecision; | |
| /* Normalize our MSB. */ | |
| extendedPrecision = precision + precision - 1; | |
| if (omsb != extendedPrecision) { | |
| APInt::tcShiftLeft(fullSignificand, newPartsCount, | |
| extendedPrecision - omsb); | |
| exponent -= extendedPrecision - omsb; | |
| } | |
| /* Create new semantics. */ | |
| extendedSemantics = *semantics; | |
| extendedSemantics.precision = extendedPrecision; | |
| if (newPartsCount == 1) | |
| significand.part = fullSignificand[0]; | |
| else | |
| significand.parts = fullSignificand; | |
| semantics = &extendedSemantics; | |
| APFloat extendedAddend(*addend); | |
| status = extendedAddend.convert(extendedSemantics, rmTowardZero, &ignored); | |
| assert(status == opOK); | |
| (void)status; | |
| lost_fraction = addOrSubtractSignificand(extendedAddend, false); | |
| /* Restore our state. */ | |
| if (newPartsCount == 1) | |
| fullSignificand[0] = significand.part; | |
| significand = savedSignificand; | |
| semantics = savedSemantics; | |
| omsb = APInt::tcMSB(fullSignificand, newPartsCount) + 1; | |
| } | |
| exponent -= (precision - 1); | |
| if (omsb > precision) { | |
| unsigned int bits, significantParts; | |
| lostFraction lf; | |
| bits = omsb - precision; | |
| significantParts = partCountForBits(omsb); | |
| lf = shiftRight(fullSignificand, significantParts, bits); | |
| lost_fraction = combineLostFractions(lf, lost_fraction); | |
| exponent += bits; | |
| } | |
| APInt::tcAssign(lhsSignificand, fullSignificand, partsCount); | |
| if (newPartsCount > 4) | |
| delete [] fullSignificand; | |
| return lost_fraction; | |
| } | |
| /* Multiply the significands of LHS and RHS to DST. */ | |
| lostFraction | |
| APFloat::divideSignificand(const APFloat &rhs) | |
| { | |
| unsigned int bit, i, partsCount; | |
| const integerPart *rhsSignificand; | |
| integerPart *lhsSignificand, *dividend, *divisor; | |
| integerPart scratch[4]; | |
| lostFraction lost_fraction; | |
| assert(semantics == rhs.semantics); | |
| lhsSignificand = significandParts(); | |
| rhsSignificand = rhs.significandParts(); | |
| partsCount = partCount(); | |
| if (partsCount > 2) | |
| dividend = new integerPart[partsCount * 2]; | |
| else | |
| dividend = scratch; | |
| divisor = dividend + partsCount; | |
| /* Copy the dividend and divisor as they will be modified in-place. */ | |
| for (i = 0; i < partsCount; i++) { | |
| dividend[i] = lhsSignificand[i]; | |
| divisor[i] = rhsSignificand[i]; | |
| lhsSignificand[i] = 0; | |
| } | |
| exponent -= rhs.exponent; | |
| unsigned int precision = semantics->precision; | |
| /* Normalize the divisor. */ | |
| bit = precision - APInt::tcMSB(divisor, partsCount) - 1; | |
| if (bit) { | |
| exponent += bit; | |
| APInt::tcShiftLeft(divisor, partsCount, bit); | |
| } | |
| /* Normalize the dividend. */ | |
| bit = precision - APInt::tcMSB(dividend, partsCount) - 1; | |
| if (bit) { | |
| exponent -= bit; | |
| APInt::tcShiftLeft(dividend, partsCount, bit); | |
| } | |
| /* Ensure the dividend >= divisor initially for the loop below. | |
| Incidentally, this means that the division loop below is | |
| guaranteed to set the integer bit to one. */ | |
| if (APInt::tcCompare(dividend, divisor, partsCount) < 0) { | |
| exponent--; | |
| APInt::tcShiftLeft(dividend, partsCount, 1); | |
| assert(APInt::tcCompare(dividend, divisor, partsCount) >= 0); | |
| } | |
| /* Long division. */ | |
| for (bit = precision; bit; bit -= 1) { | |
| if (APInt::tcCompare(dividend, divisor, partsCount) >= 0) { | |
| APInt::tcSubtract(dividend, divisor, 0, partsCount); | |
| APInt::tcSetBit(lhsSignificand, bit - 1); | |
| } | |
| APInt::tcShiftLeft(dividend, partsCount, 1); | |
| } | |
| /* Figure out the lost fraction. */ | |
| int cmp = APInt::tcCompare(dividend, divisor, partsCount); | |
| if (cmp > 0) | |
| lost_fraction = lfMoreThanHalf; | |
| else if (cmp == 0) | |
| lost_fraction = lfExactlyHalf; | |
| else if (APInt::tcIsZero(dividend, partsCount)) | |
| lost_fraction = lfExactlyZero; | |
| else | |
| lost_fraction = lfLessThanHalf; | |
| if (partsCount > 2) | |
| delete [] dividend; | |
| return lost_fraction; | |
| } | |
| unsigned int | |
| APFloat::significandMSB() const | |
| { | |
| return APInt::tcMSB(significandParts(), partCount()); | |
| } | |
| unsigned int | |
| APFloat::significandLSB() const | |
| { | |
| return APInt::tcLSB(significandParts(), partCount()); | |
| } | |
| /* Note that a zero result is NOT normalized to fcZero. */ | |
| lostFraction | |
| APFloat::shiftSignificandRight(unsigned int bits) | |
| { | |
| /* Our exponent should not overflow. */ | |
| assert((exponent_t) (exponent + bits) >= exponent); | |
| exponent += bits; | |
| return shiftRight(significandParts(), partCount(), bits); | |
| } | |
| /* Shift the significand left BITS bits, subtract BITS from its exponent. */ | |
| void | |
| APFloat::shiftSignificandLeft(unsigned int bits) | |
| { | |
| assert(bits < semantics->precision); | |
| if (bits) { | |
| unsigned int partsCount = partCount(); | |
| APInt::tcShiftLeft(significandParts(), partsCount, bits); | |
| exponent -= bits; | |
| assert(!APInt::tcIsZero(significandParts(), partsCount)); | |
| } | |
| } | |
| APFloat::cmpResult | |
| APFloat::compareAbsoluteValue(const APFloat &rhs) const | |
| { | |
| int compare; | |
| assert(semantics == rhs.semantics); | |
| assert(category == fcNormal); | |
| assert(rhs.category == fcNormal); | |
| compare = exponent - rhs.exponent; | |
| /* If exponents are equal, do an unsigned bignum comparison of the | |
| significands. */ | |
| if (compare == 0) | |
| compare = APInt::tcCompare(significandParts(), rhs.significandParts(), | |
| partCount()); | |
| if (compare > 0) | |
| return cmpGreaterThan; | |
| else if (compare < 0) | |
| return cmpLessThan; | |
| else | |
| return cmpEqual; | |
| } | |
| /* Handle overflow. Sign is preserved. We either become infinity or | |
| the largest finite number. */ | |
| APFloat::opStatus | |
| APFloat::handleOverflow(roundingMode rounding_mode) | |
| { | |
| /* Infinity? */ | |
| if (rounding_mode == rmNearestTiesToEven || | |
| rounding_mode == rmNearestTiesToAway || | |
| (rounding_mode == rmTowardPositive && !sign) || | |
| (rounding_mode == rmTowardNegative && sign)) { | |
| category = fcInfinity; | |
| return (opStatus) (opOverflow | opInexact); | |
| } | |
| /* Otherwise we become the largest finite number. */ | |
| category = fcNormal; | |
| exponent = semantics->maxExponent; | |
| APInt::tcSetLeastSignificantBits(significandParts(), partCount(), | |
| semantics->precision); | |
| return opInexact; | |
| } | |
| /* Returns TRUE if, when truncating the current number, with BIT the | |
| new LSB, with the given lost fraction and rounding mode, the result | |
| would need to be rounded away from zero (i.e., by increasing the | |
| signficand). This routine must work for fcZero of both signs, and | |
| fcNormal numbers. */ | |
| bool | |
| APFloat::roundAwayFromZero(roundingMode rounding_mode, | |
| lostFraction lost_fraction, | |
| unsigned int bit) const | |
| { | |
| /* NaNs and infinities should not have lost fractions. */ | |
| assert(category == fcNormal || category == fcZero); | |
| /* Current callers never pass this so we don't handle it. */ | |
| assert(lost_fraction != lfExactlyZero); | |
| switch (rounding_mode) { | |
| default: | |
| llvm_unreachable(0); | |
| case rmNearestTiesToAway: | |
| return lost_fraction == lfExactlyHalf || lost_fraction == lfMoreThanHalf; | |
| case rmNearestTiesToEven: | |
| if (lost_fraction == lfMoreThanHalf) | |
| return true; | |
| /* Our zeroes don't have a significand to test. */ | |
| if (lost_fraction == lfExactlyHalf && category != fcZero) | |
| return APInt::tcExtractBit(significandParts(), bit); | |
| return false; | |
| case rmTowardZero: | |
| return false; | |
| case rmTowardPositive: | |
| return sign == false; | |
| case rmTowardNegative: | |
| return sign == true; | |
| } | |
| } | |
| APFloat::opStatus | |
| APFloat::normalize(roundingMode rounding_mode, | |
| lostFraction lost_fraction) | |
| { | |
| unsigned int omsb; /* One, not zero, based MSB. */ | |
| int exponentChange; | |
| if (category != fcNormal) | |
| return opOK; | |
| /* Before rounding normalize the exponent of fcNormal numbers. */ | |
| omsb = significandMSB() + 1; | |
| if (omsb) { | |
| /* OMSB is numbered from 1. We want to place it in the integer | |
| bit numbered PRECISION if possible, with a compensating change in | |
| the exponent. */ | |
| exponentChange = omsb - semantics->precision; | |
| /* If the resulting exponent is too high, overflow according to | |
| the rounding mode. */ | |
| if (exponent + exponentChange > semantics->maxExponent) | |
| return handleOverflow(rounding_mode); | |
| /* Subnormal numbers have exponent minExponent, and their MSB | |
| is forced based on that. */ | |
| if (exponent + exponentChange < semantics->minExponent) | |
| exponentChange = semantics->minExponent - exponent; | |
| /* Shifting left is easy as we don't lose precision. */ | |
| if (exponentChange < 0) { | |
| assert(lost_fraction == lfExactlyZero); | |
| shiftSignificandLeft(-exponentChange); | |
| return opOK; | |
| } | |
| if (exponentChange > 0) { | |
| lostFraction lf; | |
| /* Shift right and capture any new lost fraction. */ | |
| lf = shiftSignificandRight(exponentChange); | |
| lost_fraction = combineLostFractions(lf, lost_fraction); | |
| /* Keep OMSB up-to-date. */ | |
| if (omsb > (unsigned) exponentChange) | |
| omsb -= exponentChange; | |
| else | |
| omsb = 0; | |
| } | |
| } | |
| /* Now round the number according to rounding_mode given the lost | |
| fraction. */ | |
| /* As specified in IEEE 754, since we do not trap we do not report | |
| underflow for exact results. */ | |
| if (lost_fraction == lfExactlyZero) { | |
| /* Canonicalize zeroes. */ | |
| if (omsb == 0) | |
| category = fcZero; | |
| return opOK; | |
| } | |
| /* Increment the significand if we're rounding away from zero. */ | |
| if (roundAwayFromZero(rounding_mode, lost_fraction, 0)) { | |
| if (omsb == 0) | |
| exponent = semantics->minExponent; | |
| incrementSignificand(); | |
| omsb = significandMSB() + 1; | |
| /* Did the significand increment overflow? */ | |
| if (omsb == (unsigned) semantics->precision + 1) { | |
| /* Renormalize by incrementing the exponent and shifting our | |
| significand right one. However if we already have the | |
| maximum exponent we overflow to infinity. */ | |
| if (exponent == semantics->maxExponent) { | |
| category = fcInfinity; | |
| return (opStatus) (opOverflow | opInexact); | |
| } | |
| shiftSignificandRight(1); | |
| return opInexact; | |
| } | |
| } | |
| /* The normal case - we were and are not denormal, and any | |
| significand increment above didn't overflow. */ | |
| if (omsb == semantics->precision) | |
| return opInexact; | |
| /* We have a non-zero denormal. */ | |
| assert(omsb < semantics->precision); | |
| /* Canonicalize zeroes. */ | |
| if (omsb == 0) | |
| category = fcZero; | |
| /* The fcZero case is a denormal that underflowed to zero. */ | |
| return (opStatus) (opUnderflow | opInexact); | |
| } | |
| APFloat::opStatus | |
| APFloat::addOrSubtractSpecials(const APFloat &rhs, bool subtract) | |
| { | |
| switch (convolve(category, rhs.category)) { | |
| default: | |
| llvm_unreachable(0); | |
| case convolve(fcNaN, fcZero): | |
| case convolve(fcNaN, fcNormal): | |
| case convolve(fcNaN, fcInfinity): | |
| case convolve(fcNaN, fcNaN): | |
| case convolve(fcNormal, fcZero): | |
| case convolve(fcInfinity, fcNormal): | |
| case convolve(fcInfinity, fcZero): | |
| return opOK; | |
| case convolve(fcZero, fcNaN): | |
| case convolve(fcNormal, fcNaN): | |
| case convolve(fcInfinity, fcNaN): | |
| category = fcNaN; | |
| copySignificand(rhs); | |
| return opOK; | |
| case convolve(fcNormal, fcInfinity): | |
| case convolve(fcZero, fcInfinity): | |
| category = fcInfinity; | |
| sign = rhs.sign ^ subtract; | |
| return opOK; | |
| case convolve(fcZero, fcNormal): | |
| assign(rhs); | |
| sign = rhs.sign ^ subtract; | |
| return opOK; | |
| case convolve(fcZero, fcZero): | |
| /* Sign depends on rounding mode; handled by caller. */ | |
| return opOK; | |
| case convolve(fcInfinity, fcInfinity): | |
| /* Differently signed infinities can only be validly | |
| subtracted. */ | |
| if (((sign ^ rhs.sign)!=0) != subtract) { | |
| makeNaN(); | |
| return opInvalidOp; | |
| } | |
| return opOK; | |
| case convolve(fcNormal, fcNormal): | |
| return opDivByZero; | |
| } | |
| } | |
| /* Add or subtract two normal numbers. */ | |
| lostFraction | |
| APFloat::addOrSubtractSignificand(const APFloat &rhs, bool subtract) | |
| { | |
| integerPart carry; | |
| lostFraction lost_fraction; | |
| int bits; | |
| /* Determine if the operation on the absolute values is effectively | |
| an addition or subtraction. */ | |
| subtract ^= (sign ^ rhs.sign) ? true : false; | |
| /* Are we bigger exponent-wise than the RHS? */ | |
| bits = exponent - rhs.exponent; | |
| /* Subtraction is more subtle than one might naively expect. */ | |
| if (subtract) { | |
| APFloat temp_rhs(rhs); | |
| bool reverse; | |
| if (bits == 0) { | |
| reverse = compareAbsoluteValue(temp_rhs) == cmpLessThan; | |
| lost_fraction = lfExactlyZero; | |
| } else if (bits > 0) { | |
| lost_fraction = temp_rhs.shiftSignificandRight(bits - 1); | |
| shiftSignificandLeft(1); | |
| reverse = false; | |
| } else { | |
| lost_fraction = shiftSignificandRight(-bits - 1); | |
| temp_rhs.shiftSignificandLeft(1); | |
| reverse = true; | |
| } | |
| if (reverse) { | |
| carry = temp_rhs.subtractSignificand | |
| (*this, lost_fraction != lfExactlyZero); | |
| copySignificand(temp_rhs); | |
| sign = !sign; | |
| } else { | |
| carry = subtractSignificand | |
| (temp_rhs, lost_fraction != lfExactlyZero); | |
| } | |
| /* Invert the lost fraction - it was on the RHS and | |
| subtracted. */ | |
| if (lost_fraction == lfLessThanHalf) | |
| lost_fraction = lfMoreThanHalf; | |
| else if (lost_fraction == lfMoreThanHalf) | |
| lost_fraction = lfLessThanHalf; | |
| /* The code above is intended to ensure that no borrow is | |
| necessary. */ | |
| assert(!carry); | |
| (void)carry; | |
| } else { | |
| if (bits > 0) { | |
| APFloat temp_rhs(rhs); | |
| lost_fraction = temp_rhs.shiftSignificandRight(bits); | |
| carry = addSignificand(temp_rhs); | |
| } else { | |
| lost_fraction = shiftSignificandRight(-bits); | |
| carry = addSignificand(rhs); | |
| } | |
| /* We have a guard bit; generating a carry cannot happen. */ | |
| assert(!carry); | |
| (void)carry; | |
| } | |
| return lost_fraction; | |
| } | |
| APFloat::opStatus | |
| APFloat::multiplySpecials(const APFloat &rhs) | |
| { | |
| switch (convolve(category, rhs.category)) { | |
| default: | |
| llvm_unreachable(0); | |
| case convolve(fcNaN, fcZero): | |
| case convolve(fcNaN, fcNormal): | |
| case convolve(fcNaN, fcInfinity): | |
| case convolve(fcNaN, fcNaN): | |
| return opOK; | |
| case convolve(fcZero, fcNaN): | |
| case convolve(fcNormal, fcNaN): | |
| case convolve(fcInfinity, fcNaN): | |
| category = fcNaN; | |
| copySignificand(rhs); | |
| return opOK; | |
| case convolve(fcNormal, fcInfinity): | |
| case convolve(fcInfinity, fcNormal): | |
| case convolve(fcInfinity, fcInfinity): | |
| category = fcInfinity; | |
| return opOK; | |
| case convolve(fcZero, fcNormal): | |
| case convolve(fcNormal, fcZero): | |
| case convolve(fcZero, fcZero): | |
| category = fcZero; | |
| return opOK; | |
| case convolve(fcZero, fcInfinity): | |
| case convolve(fcInfinity, fcZero): | |
| makeNaN(); | |
| return opInvalidOp; | |
| case convolve(fcNormal, fcNormal): | |
| return opOK; | |
| } | |
| } | |
| APFloat::opStatus | |
| APFloat::divideSpecials(const APFloat &rhs) | |
| { | |
| switch (convolve(category, rhs.category)) { | |
| default: | |
| llvm_unreachable(0); | |
| case convolve(fcNaN, fcZero): | |
| case convolve(fcNaN, fcNormal): | |
| case convolve(fcNaN, fcInfinity): | |
| case convolve(fcNaN, fcNaN): | |
| case convolve(fcInfinity, fcZero): | |
| case convolve(fcInfinity, fcNormal): | |
| case convolve(fcZero, fcInfinity): | |
| case convolve(fcZero, fcNormal): | |
| return opOK; | |
| case convolve(fcZero, fcNaN): | |
| case convolve(fcNormal, fcNaN): | |
| case convolve(fcInfinity, fcNaN): | |
| category = fcNaN; | |
| copySignificand(rhs); | |
| return opOK; | |
| case convolve(fcNormal, fcInfinity): | |
| category = fcZero; | |
| return opOK; | |
| case convolve(fcNormal, fcZero): | |
| category = fcInfinity; | |
| return opDivByZero; | |
| case convolve(fcInfinity, fcInfinity): | |
| case convolve(fcZero, fcZero): | |
| makeNaN(); | |
| return opInvalidOp; | |
| case convolve(fcNormal, fcNormal): | |
| return opOK; | |
| } | |
| } | |
| APFloat::opStatus | |
| APFloat::modSpecials(const APFloat &rhs) | |
| { | |
| switch (convolve(category, rhs.category)) { | |
| default: | |
| llvm_unreachable(0); | |
| case convolve(fcNaN, fcZero): | |
| case convolve(fcNaN, fcNormal): | |
| case convolve(fcNaN, fcInfinity): | |
| case convolve(fcNaN, fcNaN): | |
| case convolve(fcZero, fcInfinity): | |
| case convolve(fcZero, fcNormal): | |
| case convolve(fcNormal, fcInfinity): | |
| return opOK; | |
| case convolve(fcZero, fcNaN): | |
| case convolve(fcNormal, fcNaN): | |
| case convolve(fcInfinity, fcNaN): | |
| category = fcNaN; | |
| copySignificand(rhs); | |
| return opOK; | |
| case convolve(fcNormal, fcZero): | |
| case convolve(fcInfinity, fcZero): | |
| case convolve(fcInfinity, fcNormal): | |
| case convolve(fcInfinity, fcInfinity): | |
| case convolve(fcZero, fcZero): | |
| makeNaN(); | |
| return opInvalidOp; | |
| case convolve(fcNormal, fcNormal): | |
| return opOK; | |
| } | |
| } | |
| /* Change sign. */ | |
| void | |
| APFloat::changeSign() | |
| { | |
| /* Look mummy, this one's easy. */ | |
| sign = !sign; | |
| } | |
| void | |
| APFloat::clearSign() | |
| { | |
| /* So is this one. */ | |
| sign = 0; | |
| } | |
| void | |
| APFloat::copySign(const APFloat &rhs) | |
| { | |
| /* And this one. */ | |
| sign = rhs.sign; | |
| } | |
| /* Normalized addition or subtraction. */ | |
| APFloat::opStatus | |
| APFloat::addOrSubtract(const APFloat &rhs, roundingMode rounding_mode, | |
| bool subtract) | |
| { | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| fs = addOrSubtractSpecials(rhs, subtract); | |
| /* This return code means it was not a simple case. */ | |
| if (fs == opDivByZero) { | |
| lostFraction lost_fraction; | |
| lost_fraction = addOrSubtractSignificand(rhs, subtract); | |
| fs = normalize(rounding_mode, lost_fraction); | |
| /* Can only be zero if we lost no fraction. */ | |
| assert(category != fcZero || lost_fraction == lfExactlyZero); | |
| } | |
| /* If two numbers add (exactly) to zero, IEEE 754 decrees it is a | |
| positive zero unless rounding to minus infinity, except that | |
| adding two like-signed zeroes gives that zero. */ | |
| if (category == fcZero) { | |
| if (rhs.category != fcZero || (sign == rhs.sign) == subtract) | |
| sign = (rounding_mode == rmTowardNegative); | |
| } | |
| return fs; | |
| } | |
| /* Normalized addition. */ | |
| APFloat::opStatus | |
| APFloat::add(const APFloat &rhs, roundingMode rounding_mode) | |
| { | |
| return addOrSubtract(rhs, rounding_mode, false); | |
| } | |
| /* Normalized subtraction. */ | |
| APFloat::opStatus | |
| APFloat::subtract(const APFloat &rhs, roundingMode rounding_mode) | |
| { | |
| return addOrSubtract(rhs, rounding_mode, true); | |
| } | |
| /* Normalized multiply. */ | |
| APFloat::opStatus | |
| APFloat::multiply(const APFloat &rhs, roundingMode rounding_mode) | |
| { | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| sign ^= rhs.sign; | |
| fs = multiplySpecials(rhs); | |
| if (category == fcNormal) { | |
| lostFraction lost_fraction = multiplySignificand(rhs, 0); | |
| fs = normalize(rounding_mode, lost_fraction); | |
| if (lost_fraction != lfExactlyZero) | |
| fs = (opStatus) (fs | opInexact); | |
| } | |
| return fs; | |
| } | |
| /* Normalized divide. */ | |
| APFloat::opStatus | |
| APFloat::divide(const APFloat &rhs, roundingMode rounding_mode) | |
| { | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| sign ^= rhs.sign; | |
| fs = divideSpecials(rhs); | |
| if (category == fcNormal) { | |
| lostFraction lost_fraction = divideSignificand(rhs); | |
| fs = normalize(rounding_mode, lost_fraction); | |
| if (lost_fraction != lfExactlyZero) | |
| fs = (opStatus) (fs | opInexact); | |
| } | |
| return fs; | |
| } | |
| /* Normalized remainder. This is not currently correct in all cases. */ | |
| APFloat::opStatus | |
| APFloat::remainder(const APFloat &rhs) | |
| { | |
| opStatus fs; | |
| APFloat V = *this; | |
| unsigned int origSign = sign; | |
| assertArithmeticOK(*semantics); | |
| fs = V.divide(rhs, rmNearestTiesToEven); | |
| if (fs == opDivByZero) | |
| return fs; | |
| int parts = partCount(); | |
| integerPart *x = new integerPart[parts]; | |
| bool ignored; | |
| fs = V.convertToInteger(x, parts * integerPartWidth, true, | |
| rmNearestTiesToEven, &ignored); | |
| if (fs==opInvalidOp) | |
| return fs; | |
| fs = V.convertFromZeroExtendedInteger(x, parts * integerPartWidth, true, | |
| rmNearestTiesToEven); | |
| assert(fs==opOK); // should always work | |
| fs = V.multiply(rhs, rmNearestTiesToEven); | |
| assert(fs==opOK || fs==opInexact); // should not overflow or underflow | |
| fs = subtract(V, rmNearestTiesToEven); | |
| assert(fs==opOK || fs==opInexact); // likewise | |
| if (isZero()) | |
| sign = origSign; // IEEE754 requires this | |
| delete[] x; | |
| return fs; | |
| } | |
| /* Normalized llvm frem (C fmod). | |
| This is not currently correct in all cases. */ | |
| APFloat::opStatus | |
| APFloat::mod(const APFloat &rhs, roundingMode rounding_mode) | |
| { | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| fs = modSpecials(rhs); | |
| if (category == fcNormal && rhs.category == fcNormal) { | |
| APFloat V = *this; | |
| unsigned int origSign = sign; | |
| fs = V.divide(rhs, rmNearestTiesToEven); | |
| if (fs == opDivByZero) | |
| return fs; | |
| int parts = partCount(); | |
| integerPart *x = new integerPart[parts]; | |
| bool ignored; | |
| fs = V.convertToInteger(x, parts * integerPartWidth, true, | |
| rmTowardZero, &ignored); | |
| if (fs==opInvalidOp) | |
| return fs; | |
| fs = V.convertFromZeroExtendedInteger(x, parts * integerPartWidth, true, | |
| rmNearestTiesToEven); | |
| assert(fs==opOK); // should always work | |
| fs = V.multiply(rhs, rounding_mode); | |
| assert(fs==opOK || fs==opInexact); // should not overflow or underflow | |
| fs = subtract(V, rounding_mode); | |
| assert(fs==opOK || fs==opInexact); // likewise | |
| if (isZero()) | |
| sign = origSign; // IEEE754 requires this | |
| delete[] x; | |
| } | |
| return fs; | |
| } | |
| /* Normalized fused-multiply-add. */ | |
| APFloat::opStatus | |
| APFloat::fusedMultiplyAdd(const APFloat &multiplicand, | |
| const APFloat &addend, | |
| roundingMode rounding_mode) | |
| { | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| /* Post-multiplication sign, before addition. */ | |
| sign ^= multiplicand.sign; | |
| /* If and only if all arguments are normal do we need to do an | |
| extended-precision calculation. */ | |
| if (category == fcNormal && | |
| multiplicand.category == fcNormal && | |
| addend.category == fcNormal) { | |
| lostFraction lost_fraction; | |
| lost_fraction = multiplySignificand(multiplicand, &addend); | |
| fs = normalize(rounding_mode, lost_fraction); | |
| if (lost_fraction != lfExactlyZero) | |
| fs = (opStatus) (fs | opInexact); | |
| /* If two numbers add (exactly) to zero, IEEE 754 decrees it is a | |
| positive zero unless rounding to minus infinity, except that | |
| adding two like-signed zeroes gives that zero. */ | |
| if (category == fcZero && sign != addend.sign) | |
| sign = (rounding_mode == rmTowardNegative); | |
| } else { | |
| fs = multiplySpecials(multiplicand); | |
| /* FS can only be opOK or opInvalidOp. There is no more work | |
| to do in the latter case. The IEEE-754R standard says it is | |
| implementation-defined in this case whether, if ADDEND is a | |
| quiet NaN, we raise invalid op; this implementation does so. | |
| If we need to do the addition we can do so with normal | |
| precision. */ | |
| if (fs == opOK) | |
| fs = addOrSubtract(addend, rounding_mode, false); | |
| } | |
| return fs; | |
| } | |
| /* Comparison requires normalized numbers. */ | |
| APFloat::cmpResult | |
| APFloat::compare(const APFloat &rhs) const | |
| { | |
| cmpResult result; | |
| assertArithmeticOK(*semantics); | |
| assert(semantics == rhs.semantics); | |
| switch (convolve(category, rhs.category)) { | |
| default: | |
| llvm_unreachable(0); | |
| case convolve(fcNaN, fcZero): | |
| case convolve(fcNaN, fcNormal): | |
| case convolve(fcNaN, fcInfinity): | |
| case convolve(fcNaN, fcNaN): | |
| case convolve(fcZero, fcNaN): | |
| case convolve(fcNormal, fcNaN): | |
| case convolve(fcInfinity, fcNaN): | |
| return cmpUnordered; | |
| case convolve(fcInfinity, fcNormal): | |
| case convolve(fcInfinity, fcZero): | |
| case convolve(fcNormal, fcZero): | |
| if (sign) | |
| return cmpLessThan; | |
| else | |
| return cmpGreaterThan; | |
| case convolve(fcNormal, fcInfinity): | |
| case convolve(fcZero, fcInfinity): | |
| case convolve(fcZero, fcNormal): | |
| if (rhs.sign) | |
| return cmpGreaterThan; | |
| else | |
| return cmpLessThan; | |
| case convolve(fcInfinity, fcInfinity): | |
| if (sign == rhs.sign) | |
| return cmpEqual; | |
| else if (sign) | |
| return cmpLessThan; | |
| else | |
| return cmpGreaterThan; | |
| case convolve(fcZero, fcZero): | |
| return cmpEqual; | |
| case convolve(fcNormal, fcNormal): | |
| break; | |
| } | |
| /* Two normal numbers. Do they have the same sign? */ | |
| if (sign != rhs.sign) { | |
| if (sign) | |
| result = cmpLessThan; | |
| else | |
| result = cmpGreaterThan; | |
| } else { | |
| /* Compare absolute values; invert result if negative. */ | |
| result = compareAbsoluteValue(rhs); | |
| if (sign) { | |
| if (result == cmpLessThan) | |
| result = cmpGreaterThan; | |
| else if (result == cmpGreaterThan) | |
| result = cmpLessThan; | |
| } | |
| } | |
| return result; | |
| } | |
| /// APFloat::convert - convert a value of one floating point type to another. | |
| /// The return value corresponds to the IEEE754 exceptions. *losesInfo | |
| /// records whether the transformation lost information, i.e. whether | |
| /// converting the result back to the original type will produce the | |
| /// original value (this is almost the same as return value==fsOK, but there | |
| /// are edge cases where this is not so). | |
| APFloat::opStatus | |
| APFloat::convert(const fltSemantics &toSemantics, | |
| roundingMode rounding_mode, bool *losesInfo) | |
| { | |
| lostFraction lostFraction; | |
| unsigned int newPartCount, oldPartCount; | |
| opStatus fs; | |
| assertArithmeticOK(*semantics); | |
| assertArithmeticOK(toSemantics); | |
| lostFraction = lfExactlyZero; | |
| newPartCount = partCountForBits(toSemantics.precision + 1); | |
| oldPartCount = partCount(); | |
| /* Handle storage complications. If our new form is wider, | |
| re-allocate our bit pattern into wider storage. If it is | |
| narrower, we ignore the excess parts, but if narrowing to a | |
| single part we need to free the old storage. | |
| Be careful not to reference significandParts for zeroes | |
| and infinities, since it aborts. */ | |
| if (newPartCount > oldPartCount) { | |
| integerPart *newParts; | |
| newParts = new integerPart[newPartCount]; | |
| APInt::tcSet(newParts, 0, newPartCount); | |
| if (category==fcNormal || category==fcNaN) | |
| APInt::tcAssign(newParts, significandParts(), oldPartCount); | |
| freeSignificand(); | |
| significand.parts = newParts; | |
| } else if (newPartCount < oldPartCount) { | |
| /* Capture any lost fraction through truncation of parts so we get | |
| correct rounding whilst normalizing. */ | |
| if (category==fcNormal) | |
| lostFraction = lostFractionThroughTruncation | |
| (significandParts(), oldPartCount, toSemantics.precision); | |
| if (newPartCount == 1) { | |
| integerPart newPart = 0; | |
| if (category==fcNormal || category==fcNaN) | |
| newPart = significandParts()[0]; | |
| freeSignificand(); | |
| significand.part = newPart; | |
| } | |
| } | |
| if (category == fcNormal) { | |
| /* Re-interpret our bit-pattern. */ | |
| exponent += toSemantics.precision - semantics->precision; | |
| semantics = &toSemantics; | |
| fs = normalize(rounding_mode, lostFraction); | |
| *losesInfo = (fs != opOK); | |
| } else if (category == fcNaN) { | |
| int shift = toSemantics.precision - semantics->precision; | |
| // Do this now so significandParts gets the right answer | |
| const fltSemantics *oldSemantics = semantics; | |
| semantics = &toSemantics; | |
| *losesInfo = false; | |
| // No normalization here, just truncate | |
| if (shift>0) | |
| APInt::tcShiftLeft(significandParts(), newPartCount, shift); | |
| else if (shift < 0) { | |
| unsigned ushift = -shift; | |
| // Figure out if we are losing information. This happens | |
| // if are shifting out something other than 0s, or if the x87 long | |
| // double input did not have its integer bit set (pseudo-NaN), or if the | |
| // x87 long double input did not have its QNan bit set (because the x87 | |
| // hardware sets this bit when converting a lower-precision NaN to | |
| // x87 long double). | |
| if (APInt::tcLSB(significandParts(), newPartCount) < ushift) | |
| *losesInfo = true; | |
| if (oldSemantics == &APFloat::x87DoubleExtended && | |
| (!(*significandParts() & 0x8000000000000000ULL) || | |
| !(*significandParts() & 0x4000000000000000ULL))) | |
| *losesInfo = true; | |
| APInt::tcShiftRight(significandParts(), newPartCount, ushift); | |
| } | |
| // gcc forces the Quiet bit on, which means (float)(double)(float_sNan) | |
| // does not give you back the same bits. This is dubious, and we | |
| // don't currently do it. You're really supposed to get | |
| // an invalid operation signal at runtime, but nobody does that. | |
| fs = opOK; | |
| } else { | |
| semantics = &toSemantics; | |
| fs = opOK; | |
| *losesInfo = false; | |
| } | |
| return fs; | |
| } | |
| /* Convert a floating point number to an integer according to the | |
| rounding mode. If the rounded integer value is out of range this | |
| returns an invalid operation exception and the contents of the | |
| destination parts are unspecified. If the rounded value is in | |
| range but the floating point number is not the exact integer, the C | |
| standard doesn't require an inexact exception to be raised. IEEE | |
| 854 does require it so we do that. | |
| Note that for conversions to integer type the C standard requires | |
| round-to-zero to always be used. */ | |
| APFloat::opStatus | |
| APFloat::convertToSignExtendedInteger(integerPart *parts, unsigned int width, | |
| bool isSigned, | |
| roundingMode rounding_mode, | |
| bool *isExact) const | |
| { | |
| lostFraction lost_fraction; | |
| const integerPart *src; | |
| unsigned int dstPartsCount, truncatedBits; | |
| assertArithmeticOK(*semantics); | |
| *isExact = false; | |
| /* Handle the three special cases first. */ | |
| if (category == fcInfinity || category == fcNaN) | |
| return opInvalidOp; | |
| dstPartsCount = partCountForBits(width); | |
| if (category == fcZero) { | |
| APInt::tcSet(parts, 0, dstPartsCount); | |
| // Negative zero can't be represented as an int. | |
| *isExact = !sign; | |
| return opOK; | |
| } | |
| src = significandParts(); | |
| /* Step 1: place our absolute value, with any fraction truncated, in | |
| the destination. */ | |
| if (exponent < 0) { | |
| /* Our absolute value is less than one; truncate everything. */ | |
| APInt::tcSet(parts, 0, dstPartsCount); | |
| /* For exponent -1 the integer bit represents .5, look at that. | |
| For smaller exponents leftmost truncated bit is 0. */ | |
| truncatedBits = semantics->precision -1U - exponent; | |
| } else { | |
| /* We want the most significant (exponent + 1) bits; the rest are | |
| truncated. */ | |
| unsigned int bits = exponent + 1U; | |
| /* Hopelessly large in magnitude? */ | |
| if (bits > width) | |
| return opInvalidOp; | |
| if (bits < semantics->precision) { | |
| /* We truncate (semantics->precision - bits) bits. */ | |
| truncatedBits = semantics->precision - bits; | |
| APInt::tcExtract(parts, dstPartsCount, src, bits, truncatedBits); | |
| } else { | |
| /* We want at least as many bits as are available. */ | |
| APInt::tcExtract(parts, dstPartsCount, src, semantics->precision, 0); | |
| APInt::tcShiftLeft(parts, dstPartsCount, bits - semantics->precision); | |
| truncatedBits = 0; | |
| } | |
| } | |
| /* Step 2: work out any lost fraction, and increment the absolute | |
| value if we would round away from zero. */ | |
| if (truncatedBits) { | |
| lost_fraction = lostFractionThroughTruncation(src, partCount(), | |
| truncatedBits); | |
| if (lost_fraction != lfExactlyZero && | |
| roundAwayFromZero(rounding_mode, lost_fraction, truncatedBits)) { | |
| if (APInt::tcIncrement(parts, dstPartsCount)) | |
| return opInvalidOp; /* Overflow. */ | |
| } | |
| } else { | |
| lost_fraction = lfExactlyZero; | |
| } | |
| /* Step 3: check if we fit in the destination. */ | |
| unsigned int omsb = APInt::tcMSB(parts, dstPartsCount) + 1; | |
| if (sign) { | |
| if (!isSigned) { | |
| /* Negative numbers cannot be represented as unsigned. */ | |
| if (omsb != 0) | |
| return opInvalidOp; | |
| } else { | |
| /* It takes omsb bits to represent the unsigned integer value. | |
| We lose a bit for the sign, but care is needed as the | |
| maximally negative integer is a special case. */ | |
| if (omsb == width && APInt::tcLSB(parts, dstPartsCount) + 1 != omsb) | |
| return opInvalidOp; | |
| /* This case can happen because of rounding. */ | |
| if (omsb > width) | |
| return opInvalidOp; | |
| } | |
| APInt::tcNegate (parts, dstPartsCount); | |
| } else { | |
| if (omsb >= width + !isSigned) | |
| return opInvalidOp; | |
| } | |
| if (lost_fraction == lfExactlyZero) { | |
| *isExact = true; | |
| return opOK; | |
| } else | |
| return opInexact; | |
| } | |
| /* Same as convertToSignExtendedInteger, except we provide | |
| deterministic values in case of an invalid operation exception, | |
| namely zero for NaNs and the minimal or maximal value respectively | |
| for underflow or overflow. | |
| The *isExact output tells whether the result is exact, in the sense | |
| that converting it back to the original floating point type produces | |
| the original value. This is almost equivalent to result==opOK, | |
| except for negative zeroes. | |
| */ | |
| APFloat::opStatus | |
| APFloat::convertToInteger(integerPart *parts, unsigned int width, | |
| bool isSigned, | |
| roundingMode rounding_mode, bool *isExact) const | |
| { | |
| opStatus fs; | |
| fs = convertToSignExtendedInteger(parts, width, isSigned, rounding_mode, | |
| isExact); | |
| if (fs == opInvalidOp) { | |
| unsigned int bits, dstPartsCount; | |
| dstPartsCount = partCountForBits(width); | |
| if (category == fcNaN) | |
| bits = 0; | |
| else if (sign) | |
| bits = isSigned; | |
| else | |
| bits = width - isSigned; | |
| APInt::tcSetLeastSignificantBits(parts, dstPartsCount, bits); | |
| if (sign && isSigned) | |
| APInt::tcShiftLeft(parts, dstPartsCount, width - 1); | |
| } | |
| return fs; | |
| } | |
| /* Same as convertToInteger(integerPart*, ...), except the result is returned in | |
| an APSInt, whose initial bit-width and signed-ness are used to determine the | |
| precision of the conversion. | |
| */ | |
| APFloat::opStatus | |
| APFloat::convertToInteger(APSInt &result, | |
| roundingMode rounding_mode, bool *isExact) const | |
| { | |
| unsigned bitWidth = result.getBitWidth(); | |
| SmallVector<uint64_t, 4> parts(result.getNumWords()); | |
| opStatus status = convertToInteger( | |
| parts.data(), bitWidth, result.isSigned(), rounding_mode, isExact); | |
| // Keeps the original signed-ness. | |
| result = APInt(bitWidth, parts); | |
| return status; | |
| } | |
| /* Convert an unsigned integer SRC to a floating point number, | |
| rounding according to ROUNDING_MODE. The sign of the floating | |
| point number is not modified. */ | |
| APFloat::opStatus | |
| APFloat::convertFromUnsignedParts(const integerPart *src, | |
| unsigned int srcCount, | |
| roundingMode rounding_mode) | |
| { | |
| unsigned int omsb, precision, dstCount; | |
| integerPart *dst; | |
| lostFraction lost_fraction; | |
| assertArithmeticOK(*semantics); | |
| category = fcNormal; | |
| omsb = APInt::tcMSB(src, srcCount) + 1; | |
| dst = significandParts(); | |
| dstCount = partCount(); | |
| precision = semantics->precision; | |
| /* We want the most significant PRECISION bits of SRC. There may not | |
| be that many; extract what we can. */ | |
| if (precision <= omsb) { | |
| exponent = omsb - 1; | |
| lost_fraction = lostFractionThroughTruncation(src, srcCount, | |
| omsb - precision); | |
| APInt::tcExtract(dst, dstCount, src, precision, omsb - precision); | |
| } else { | |
| exponent = precision - 1; | |
| lost_fraction = lfExactlyZero; | |
| APInt::tcExtract(dst, dstCount, src, omsb, 0); | |
| } | |
| return normalize(rounding_mode, lost_fraction); | |
| } | |
| APFloat::opStatus | |
| APFloat::convertFromAPInt(const APInt &Val, | |
| bool isSigned, | |
| roundingMode rounding_mode) | |
| { | |
| unsigned int partCount = Val.getNumWords(); | |
| APInt api = Val; | |
| sign = false; | |
| if (isSigned && api.isNegative()) { | |
| sign = true; | |
| api = -api; | |
| } | |
| return convertFromUnsignedParts(api.getRawData(), partCount, rounding_mode); | |
| } | |
| /* Convert a two's complement integer SRC to a floating point number, | |
| rounding according to ROUNDING_MODE. ISSIGNED is true if the | |
| integer is signed, in which case it must be sign-extended. */ | |
| APFloat::opStatus | |
| APFloat::convertFromSignExtendedInteger(const integerPart *src, | |
| unsigned int srcCount, | |
| bool isSigned, | |
| roundingMode rounding_mode) | |
| { | |
| opStatus status; | |
| assertArithmeticOK(*semantics); | |
| if (isSigned && | |
| APInt::tcExtractBit(src, srcCount * integerPartWidth - 1)) { | |
| integerPart *copy; | |
| /* If we're signed and negative negate a copy. */ | |
| sign = true; | |
| copy = new integerPart[srcCount]; | |
| APInt::tcAssign(copy, src, srcCount); | |
| APInt::tcNegate(copy, srcCount); | |
| status = convertFromUnsignedParts(copy, srcCount, rounding_mode); | |
| delete [] copy; | |
| } else { | |
| sign = false; | |
| status = convertFromUnsignedParts(src, srcCount, rounding_mode); | |
| } | |
| return status; | |
| } | |
| /* FIXME: should this just take a const APInt reference? */ | |
| APFloat::opStatus | |
| APFloat::convertFromZeroExtendedInteger(const integerPart *parts, | |
| unsigned int width, bool isSigned, | |
| roundingMode rounding_mode) | |
| { | |
| unsigned int partCount = partCountForBits(width); | |
| APInt api = APInt(width, makeArrayRef(parts, partCount)); | |
| sign = false; | |
| if (isSigned && APInt::tcExtractBit(parts, width - 1)) { | |
| sign = true; | |
| api = -api; | |
| } | |
| return convertFromUnsignedParts(api.getRawData(), partCount, rounding_mode); | |
| } | |
| APFloat::opStatus | |
| APFloat::convertFromHexadecimalString(StringRef s, roundingMode rounding_mode) | |
| { | |
| lostFraction lost_fraction = lfExactlyZero; | |
| integerPart *significand; | |
| unsigned int bitPos, partsCount; | |
| StringRef::iterator dot, firstSignificantDigit; | |
| zeroSignificand(); | |
| exponent = 0; | |
| category = fcNormal; | |
| significand = significandParts(); | |
| partsCount = partCount(); | |
| bitPos = partsCount * integerPartWidth; | |
| /* Skip leading zeroes and any (hexa)decimal point. */ | |
| StringRef::iterator begin = s.begin(); | |
| StringRef::iterator end = s.end(); | |
| StringRef::iterator p = skipLeadingZeroesAndAnyDot(begin, end, &dot); | |
| firstSignificantDigit = p; | |
| for (; p != end;) { | |
| integerPart hex_value; | |
| if (*p == '.') { | |
| assert(dot == end && "String contains multiple dots"); | |
| dot = p++; | |
| if (p == end) { | |
| break; | |
| } | |
| } | |
| hex_value = hexDigitValue(*p); | |
| if (hex_value == -1U) { | |
| break; | |
| } | |
| p++; | |
| if (p == end) { | |
| break; | |
| } else { | |
| /* Store the number whilst 4-bit nibbles remain. */ | |
| if (bitPos) { | |
| bitPos -= 4; | |
| hex_value <<= bitPos % integerPartWidth; | |
| significand[bitPos / integerPartWidth] |= hex_value; | |
| } else { | |
| lost_fraction = trailingHexadecimalFraction(p, end, hex_value); | |
| while (p != end && hexDigitValue(*p) != -1U) | |
| p++; | |
| break; | |
| } | |
| } | |
| } | |
| /* Hex floats require an exponent but not a hexadecimal point. */ | |
| assert(p != end && "Hex strings require an exponent"); | |
| assert((*p == 'p' || *p == 'P') && "Invalid character in significand"); | |
| assert(p != begin && "Significand has no digits"); | |
| assert((dot == end || p - begin != 1) && "Significand has no digits"); | |
| /* Ignore the exponent if we are zero. */ | |
| if (p != firstSignificantDigit) { | |
| int expAdjustment; | |
| /* Implicit hexadecimal point? */ | |
| if (dot == end) | |
| dot = p; | |
| /* Calculate the exponent adjustment implicit in the number of | |
| significant digits. */ | |
| expAdjustment = static_cast<int>(dot - firstSignificantDigit); | |
| if (expAdjustment < 0) | |
| expAdjustment++; | |
| expAdjustment = expAdjustment * 4 - 1; | |
| /* Adjust for writing the significand starting at the most | |
| significant nibble. */ | |
| expAdjustment += semantics->precision; | |
| expAdjustment -= partsCount * integerPartWidth; | |
| /* Adjust for the given exponent. */ | |
| exponent = totalExponent(p + 1, end, expAdjustment); | |
| } | |
| return normalize(rounding_mode, lost_fraction); | |
| } | |
| APFloat::opStatus | |
| APFloat::roundSignificandWithExponent(const integerPart *decSigParts, | |
| unsigned sigPartCount, int exp, | |
| roundingMode rounding_mode) | |
| { | |
| unsigned int parts, pow5PartCount; | |
| fltSemantics calcSemantics = { 32767, -32767, 0, true }; | |
| integerPart pow5Parts[maxPowerOfFiveParts]; | |
| bool isNearest; | |
| isNearest = (rounding_mode == rmNearestTiesToEven || | |
| rounding_mode == rmNearestTiesToAway); | |
| parts = partCountForBits(semantics->precision + 11); | |
| /* Calculate pow(5, abs(exp)). */ | |
| pow5PartCount = powerOf5(pow5Parts, exp >= 0 ? exp: -exp); | |
| for (;; parts *= 2) { | |
| opStatus sigStatus, powStatus; | |
| unsigned int excessPrecision, truncatedBits; | |
| calcSemantics.precision = parts * integerPartWidth - 1; | |
| excessPrecision = calcSemantics.precision - semantics->precision; | |
| truncatedBits = excessPrecision; | |
| APFloat decSig(calcSemantics, fcZero, sign); | |
| APFloat pow5(calcSemantics, fcZero, false); | |
| sigStatus = decSig.convertFromUnsignedParts(decSigParts, sigPartCount, | |
| rmNearestTiesToEven); | |
| powStatus = pow5.convertFromUnsignedParts(pow5Parts, pow5PartCount, | |
| rmNearestTiesToEven); | |
| /* Add exp, as 10^n = 5^n * 2^n. */ | |
| decSig.exponent += exp; | |
| lostFraction calcLostFraction; | |
| integerPart HUerr, HUdistance; | |
| unsigned int powHUerr; | |
| if (exp >= 0) { | |
| /* multiplySignificand leaves the precision-th bit set to 1. */ | |
| calcLostFraction = decSig.multiplySignificand(pow5, NULL); | |
| powHUerr = powStatus != opOK; | |
| } else { | |
| calcLostFraction = decSig.divideSignificand(pow5); | |
| /* Denormal numbers have less precision. */ | |
| if (decSig.exponent < semantics->minExponent) { | |
| excessPrecision += (semantics->minExponent - decSig.exponent); | |
| truncatedBits = excessPrecision; | |
| if (excessPrecision > calcSemantics.precision) | |
| excessPrecision = calcSemantics.precision; | |
| } | |
| /* Extra half-ulp lost in reciprocal of exponent. */ | |
| powHUerr = (powStatus == opOK && calcLostFraction == lfExactlyZero) ? 0:2; | |
| } | |
| /* Both multiplySignificand and divideSignificand return the | |
| result with the integer bit set. */ | |
| assert(APInt::tcExtractBit | |
| (decSig.significandParts(), calcSemantics.precision - 1) == 1); | |
| HUerr = HUerrBound(calcLostFraction != lfExactlyZero, sigStatus != opOK, | |
| powHUerr); | |
| HUdistance = 2 * ulpsFromBoundary(decSig.significandParts(), | |
| excessPrecision, isNearest); | |
| /* Are we guaranteed to round correctly if we truncate? */ | |
| if (HUdistance >= HUerr) { | |
| APInt::tcExtract(significandParts(), partCount(), decSig.significandParts(), | |
| calcSemantics.precision - excessPrecision, | |
| excessPrecision); | |
| /* Take the exponent of decSig. If we tcExtract-ed less bits | |
| above we must adjust our exponent to compensate for the | |
| implicit right shift. */ | |
| exponent = (decSig.exponent + semantics->precision | |
| - (calcSemantics.precision - excessPrecision)); | |
| calcLostFraction = lostFractionThroughTruncation(decSig.significandParts(), | |
| decSig.partCount(), | |
| truncatedBits); | |
| return normalize(rounding_mode, calcLostFraction); | |
| } | |
| } | |
| } | |
| APFloat::opStatus | |
| APFloat::convertFromDecimalString(StringRef str, roundingMode rounding_mode) | |
| { | |
| decimalInfo D; | |
| opStatus fs; | |
| /* Scan the text. */ | |
| StringRef::iterator p = str.begin(); | |
| interpretDecimal(p, str.end(), &D); | |
| /* Handle the quick cases. First the case of no significant digits, | |
| i.e. zero, and then exponents that are obviously too large or too | |
| small. Writing L for log 10 / log 2, a number d.ddddd*10^exp | |
| definitely overflows if | |
| (exp - 1) * L >= maxExponent | |
| and definitely underflows to zero where | |
| (exp + 1) * L <= minExponent - precision | |
| With integer arithmetic the tightest bounds for L are | |
| 93/28 < L < 196/59 [ numerator <= 256 ] | |
| 42039/12655 < L < 28738/8651 [ numerator <= 65536 ] | |
| */ | |
| if (decDigitValue(*D.firstSigDigit) >= 10U) { | |
| category = fcZero; | |
| fs = opOK; | |
| /* Check whether the normalized exponent is high enough to overflow | |
| max during the log-rebasing in the max-exponent check below. */ | |
| } else if (D.normalizedExponent - 1 > INT_MAX / 42039) { | |
| fs = handleOverflow(rounding_mode); | |
| /* If it wasn't, then it also wasn't high enough to overflow max | |
| during the log-rebasing in the min-exponent check. Check that it | |
| won't overflow min in either check, then perform the min-exponent | |
| check. */ | |
| } else if (D.normalizedExponent - 1 < INT_MIN / 42039 || | |
| (D.normalizedExponent + 1) * 28738 <= | |
| 8651 * (semantics->minExponent - (int) semantics->precision)) { | |
| /* Underflow to zero and round. */ | |
| zeroSignificand(); | |
| fs = normalize(rounding_mode, lfLessThanHalf); | |
| /* We can finally safely perform the max-exponent check. */ | |
| } else if ((D.normalizedExponent - 1) * 42039 | |
| >= 12655 * semantics->maxExponent) { | |
| /* Overflow and round. */ | |
| fs = handleOverflow(rounding_mode); | |
| } else { | |
| integerPart *decSignificand; | |
| unsigned int partCount; | |
| /* A tight upper bound on number of bits required to hold an | |
| N-digit decimal integer is N * 196 / 59. Allocate enough space | |
| to hold the full significand, and an extra part required by | |
| tcMultiplyPart. */ | |
| partCount = static_cast<unsigned int>(D.lastSigDigit - D.firstSigDigit) + 1; | |
| partCount = partCountForBits(1 + 196 * partCount / 59); | |
| decSignificand = new integerPart[partCount + 1]; | |
| partCount = 0; | |
| /* Convert to binary efficiently - we do almost all multiplication | |
| in an integerPart. When this would overflow do we do a single | |
| bignum multiplication, and then revert again to multiplication | |
| in an integerPart. */ | |
| do { | |
| integerPart decValue, val, multiplier; | |
| val = 0; | |
| multiplier = 1; | |
| do { | |
| if (*p == '.') { | |
| p++; | |
| if (p == str.end()) { | |
| break; | |
| } | |
| } | |
| decValue = decDigitValue(*p++); | |
| assert(decValue < 10U && "Invalid character in significand"); | |
| multiplier *= 10; | |
| val = val * 10 + decValue; | |
| /* The maximum number that can be multiplied by ten with any | |
| digit added without overflowing an integerPart. */ | |
| } while (p <= D.lastSigDigit && multiplier <= (~ (integerPart) 0 - 9) / 10); | |
| /* Multiply out the current part. */ | |
| APInt::tcMultiplyPart(decSignificand, decSignificand, multiplier, val, | |
| partCount, partCount + 1, false); | |
| /* If we used another part (likely but not guaranteed), increase | |
| the count. */ | |
| if (decSignificand[partCount]) | |
| partCount++; | |
| } while (p <= D.lastSigDigit); | |
| category = fcNormal; | |
| fs = roundSignificandWithExponent(decSignificand, partCount, | |
| D.exponent, rounding_mode); | |
| delete [] decSignificand; | |
| } | |
| return fs; | |
| } | |
| APFloat::opStatus | |
| APFloat::convertFromString(StringRef str, roundingMode rounding_mode) | |
| { | |
| assertArithmeticOK(*semantics); | |
| assert(!str.empty() && "Invalid string length"); | |
| /* Handle a leading minus sign. */ | |
| StringRef::iterator p = str.begin(); | |
| size_t slen = str.size(); | |
| sign = *p == '-' ? 1 : 0; | |
| if (*p == '-' || *p == '+') { | |
| p++; | |
| slen--; | |
| assert(slen && "String has no digits"); | |
| } | |
| if (slen >= 2 && p[0] == '0' && (p[1] == 'x' || p[1] == 'X')) { | |
| assert(slen - 2 && "Invalid string"); | |
| return convertFromHexadecimalString(StringRef(p + 2, slen - 2), | |
| rounding_mode); | |
| } | |
| return convertFromDecimalString(StringRef(p, slen), rounding_mode); | |
| } | |
| /* Write out a hexadecimal representation of the floating point value | |
| to DST, which must be of sufficient size, in the C99 form | |
| [-]0xh.hhhhp[+-]d. Return the number of characters written, | |
| excluding the terminating NUL. | |
| If UPPERCASE, the output is in upper case, otherwise in lower case. | |
| HEXDIGITS digits appear altogether, rounding the value if | |
| necessary. If HEXDIGITS is 0, the minimal precision to display the | |
| number precisely is used instead. If nothing would appear after | |
| the decimal point it is suppressed. | |
| The decimal exponent is always printed and has at least one digit. | |
| Zero values display an exponent of zero. Infinities and NaNs | |
| appear as "infinity" or "nan" respectively. | |
| The above rules are as specified by C99. There is ambiguity about | |
| what the leading hexadecimal digit should be. This implementation | |
| uses whatever is necessary so that the exponent is displayed as | |
| stored. This implies the exponent will fall within the IEEE format | |
| range, and the leading hexadecimal digit will be 0 (for denormals), | |
| 1 (normal numbers) or 2 (normal numbers rounded-away-from-zero with | |
| any other digits zero). | |
| */ | |
| unsigned int | |
| APFloat::convertToHexString(char *dst, unsigned int hexDigits, | |
| bool upperCase, roundingMode rounding_mode) const | |
| { | |
| char *p; | |
| assertArithmeticOK(*semantics); | |
| p = dst; | |
| if (sign) | |
| *dst++ = '-'; | |
| switch (category) { | |
| case fcInfinity: | |
| memcpy (dst, upperCase ? infinityU: infinityL, sizeof infinityU - 1); | |
| dst += sizeof infinityL - 1; | |
| break; | |
| case fcNaN: | |
| memcpy (dst, upperCase ? NaNU: NaNL, sizeof NaNU - 1); | |
| dst += sizeof NaNU - 1; | |
| break; | |
| case fcZero: | |
| *dst++ = '0'; | |
| *dst++ = upperCase ? 'X': 'x'; | |
| *dst++ = '0'; | |
| if (hexDigits > 1) { | |
| *dst++ = '.'; | |
| memset (dst, '0', hexDigits - 1); | |
| dst += hexDigits - 1; | |
| } | |
| *dst++ = upperCase ? 'P': 'p'; | |
| *dst++ = '0'; | |
| break; | |
| case fcNormal: | |
| dst = convertNormalToHexString (dst, hexDigits, upperCase, rounding_mode); | |
| break; | |
| } | |
| *dst = 0; | |
| return static_cast<unsigned int>(dst - p); | |
| } | |
| /* Does the hard work of outputting the correctly rounded hexadecimal | |
| form of a normal floating point number with the specified number of | |
| hexadecimal digits. If HEXDIGITS is zero the minimum number of | |
| digits necessary to print the value precisely is output. */ | |
| char * | |
| APFloat::convertNormalToHexString(char *dst, unsigned int hexDigits, | |
| bool upperCase, | |
| roundingMode rounding_mode) const | |
| { | |
| unsigned int count, valueBits, shift, partsCount, outputDigits; | |
| const char *hexDigitChars; | |
| const integerPart *significand; | |
| char *p; | |
| bool roundUp; | |
| *dst++ = '0'; | |
| *dst++ = upperCase ? 'X': 'x'; | |
| roundUp = false; | |
| hexDigitChars = upperCase ? hexDigitsUpper: hexDigitsLower; | |
| significand = significandParts(); | |
| partsCount = partCount(); | |
| /* +3 because the first digit only uses the single integer bit, so | |
| we have 3 virtual zero most-significant-bits. */ | |
| valueBits = semantics->precision + 3; | |
| shift = integerPartWidth - valueBits % integerPartWidth; | |
| /* The natural number of digits required ignoring trailing | |
| insignificant zeroes. */ | |
| outputDigits = (valueBits - significandLSB () + 3) / 4; | |
| /* hexDigits of zero means use the required number for the | |
| precision. Otherwise, see if we are truncating. If we are, | |
| find out if we need to round away from zero. */ | |
| if (hexDigits) { | |
| if (hexDigits < outputDigits) { | |
| /* We are dropping non-zero bits, so need to check how to round. | |
| "bits" is the number of dropped bits. */ | |
| unsigned int bits; | |
| lostFraction fraction; | |
| bits = valueBits - hexDigits * 4; | |
| fraction = lostFractionThroughTruncation (significand, partsCount, bits); | |
| roundUp = roundAwayFromZero(rounding_mode, fraction, bits); | |
| } | |
| outputDigits = hexDigits; | |
| } | |
| /* Write the digits consecutively, and start writing in the location | |
| of the hexadecimal point. We move the most significant digit | |
| left and add the hexadecimal point later. */ | |
| p = ++dst; | |
| count = (valueBits + integerPartWidth - 1) / integerPartWidth; | |
| while (outputDigits && count) { | |
| integerPart part; | |
| /* Put the most significant integerPartWidth bits in "part". */ | |
| if (--count == partsCount) | |
| part = 0; /* An imaginary higher zero part. */ | |
| else | |
| part = significand[count] << shift; | |
| if (count && shift) | |
| part |= significand[count - 1] >> (integerPartWidth - shift); | |
| /* Convert as much of "part" to hexdigits as we can. */ | |
| unsigned int curDigits = integerPartWidth / 4; | |
| if (curDigits > outputDigits) | |
| curDigits = outputDigits; | |
| dst += partAsHex (dst, part, curDigits, hexDigitChars); | |
| outputDigits -= curDigits; | |
| } | |
| if (roundUp) { | |
| char *q = dst; | |
| /* Note that hexDigitChars has a trailing '0'. */ | |
| do { | |
| q--; | |
| *q = hexDigitChars[hexDigitValue (*q) + 1]; | |
| } while (*q == '0'); | |
| assert(q >= p); | |
| } else { | |
| /* Add trailing zeroes. */ | |
| memset (dst, '0', outputDigits); | |
| dst += outputDigits; | |
| } | |
| /* Move the most significant digit to before the point, and if there | |
| is something after the decimal point add it. This must come | |
| after rounding above. */ | |
| p[-1] = p[0]; | |
| if (dst -1 == p) | |
| dst--; | |
| else | |
| p[0] = '.'; | |
| /* Finally output the exponent. */ | |
| *dst++ = upperCase ? 'P': 'p'; | |
| return writeSignedDecimal (dst, exponent); | |
| } | |
| // For good performance it is desirable for different APFloats | |
| // to produce different integers. | |
| uint32_t | |
| APFloat::getHashValue() const | |
| { | |
| if (category==fcZero) return sign<<8 | semantics->precision ; | |
| else if (category==fcInfinity) return sign<<9 | semantics->precision; | |
| else if (category==fcNaN) return 1<<10 | semantics->precision; | |
| else { | |
| uint32_t hash = sign<<11 | semantics->precision | exponent<<12; | |
| const integerPart* p = significandParts(); | |
| for (int i=partCount(); i>0; i--, p++) | |
| hash ^= ((uint32_t)*p) ^ (uint32_t)((*p)>>32); | |
| return hash; | |
| } | |
| } | |
| // Conversion from APFloat to/from host float/double. It may eventually be | |
| // possible to eliminate these and have everybody deal with APFloats, but that | |
| // will take a while. This approach will not easily extend to long double. | |
| // Current implementation requires integerPartWidth==64, which is correct at | |
| // the moment but could be made more general. | |
| // Denormals have exponent minExponent in APFloat, but minExponent-1 in | |
| // the actual IEEE respresentations. We compensate for that here. | |
| APInt | |
| APFloat::convertF80LongDoubleAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&x87DoubleExtended); | |
| assert(partCount()==2); | |
| uint64_t myexponent, mysignificand; | |
| if (category==fcNormal) { | |
| myexponent = exponent+16383; //bias | |
| mysignificand = significandParts()[0]; | |
| if (myexponent==1 && !(mysignificand & 0x8000000000000000ULL)) | |
| myexponent = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0x7fff; | |
| mysignificand = 0x8000000000000000ULL; | |
| } else { | |
| assert(category == fcNaN && "Unknown category"); | |
| myexponent = 0x7fff; | |
| mysignificand = significandParts()[0]; | |
| } | |
| uint64_t words[2]; | |
| words[0] = mysignificand; | |
| words[1] = ((uint64_t)(sign & 1) << 15) | | |
| (myexponent & 0x7fffLL); | |
| return APInt(80, words); | |
| } | |
| APInt | |
| APFloat::convertPPCDoubleDoubleAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&PPCDoubleDouble); | |
| assert(partCount()==2); | |
| uint64_t myexponent, mysignificand, myexponent2, mysignificand2; | |
| if (category==fcNormal) { | |
| myexponent = exponent + 1023; //bias | |
| myexponent2 = exponent2 + 1023; | |
| mysignificand = significandParts()[0]; | |
| mysignificand2 = significandParts()[1]; | |
| if (myexponent==1 && !(mysignificand & 0x10000000000000LL)) | |
| myexponent = 0; // denormal | |
| if (myexponent2==1 && !(mysignificand2 & 0x10000000000000LL)) | |
| myexponent2 = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = 0; | |
| myexponent2 = 0; | |
| mysignificand2 = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0x7ff; | |
| myexponent2 = 0; | |
| mysignificand = 0; | |
| mysignificand2 = 0; | |
| } else { | |
| assert(category == fcNaN && "Unknown category"); | |
| myexponent = 0x7ff; | |
| mysignificand = significandParts()[0]; | |
| myexponent2 = exponent2; | |
| mysignificand2 = significandParts()[1]; | |
| } | |
| uint64_t words[2]; | |
| words[0] = ((uint64_t)(sign & 1) << 63) | | |
| ((myexponent & 0x7ff) << 52) | | |
| (mysignificand & 0xfffffffffffffLL); | |
| words[1] = ((uint64_t)(sign2 & 1) << 63) | | |
| ((myexponent2 & 0x7ff) << 52) | | |
| (mysignificand2 & 0xfffffffffffffLL); | |
| return APInt(128, words); | |
| } | |
| APInt | |
| APFloat::convertQuadrupleAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEquad); | |
| assert(partCount()==2); | |
| uint64_t myexponent, mysignificand, mysignificand2; | |
| if (category==fcNormal) { | |
| myexponent = exponent+16383; //bias | |
| mysignificand = significandParts()[0]; | |
| mysignificand2 = significandParts()[1]; | |
| if (myexponent==1 && !(mysignificand2 & 0x1000000000000LL)) | |
| myexponent = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = mysignificand2 = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0x7fff; | |
| mysignificand = mysignificand2 = 0; | |
| } else { | |
| assert(category == fcNaN && "Unknown category!"); | |
| myexponent = 0x7fff; | |
| mysignificand = significandParts()[0]; | |
| mysignificand2 = significandParts()[1]; | |
| } | |
| uint64_t words[2]; | |
| words[0] = mysignificand; | |
| words[1] = ((uint64_t)(sign & 1) << 63) | | |
| ((myexponent & 0x7fff) << 48) | | |
| (mysignificand2 & 0xffffffffffffLL); | |
| return APInt(128, words); | |
| } | |
| APInt | |
| APFloat::convertDoubleAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEdouble); | |
| assert(partCount()==1); | |
| uint64_t myexponent, mysignificand; | |
| if (category==fcNormal) { | |
| myexponent = exponent+1023; //bias | |
| mysignificand = *significandParts(); | |
| if (myexponent==1 && !(mysignificand & 0x10000000000000LL)) | |
| myexponent = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0x7ff; | |
| mysignificand = 0; | |
| } else { | |
| assert(category == fcNaN && "Unknown category!"); | |
| myexponent = 0x7ff; | |
| mysignificand = *significandParts(); | |
| } | |
| return APInt(64, ((((uint64_t)(sign & 1) << 63) | | |
| ((myexponent & 0x7ff) << 52) | | |
| (mysignificand & 0xfffffffffffffLL)))); | |
| } | |
| APInt | |
| APFloat::convertFloatAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEsingle); | |
| assert(partCount()==1); | |
| uint32_t myexponent, mysignificand; | |
| if (category==fcNormal) { | |
| myexponent = exponent+127; //bias | |
| mysignificand = (uint32_t)*significandParts(); | |
| if (myexponent == 1 && !(mysignificand & 0x800000)) | |
| myexponent = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0xff; | |
| mysignificand = 0; | |
| } else { | |
| assert(category == fcNaN && "Unknown category!"); | |
| myexponent = 0xff; | |
| mysignificand = (uint32_t)*significandParts(); | |
| } | |
| return APInt(32, (((sign&1) << 31) | ((myexponent&0xff) << 23) | | |
| (mysignificand & 0x7fffff))); | |
| } | |
| APInt | |
| APFloat::convertHalfAPFloatToAPInt() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEhalf); | |
| assert(partCount()==1); | |
| uint32_t myexponent, mysignificand; | |
| if (category==fcNormal) { | |
| myexponent = exponent+15; //bias | |
| mysignificand = (uint32_t)*significandParts(); | |
| if (myexponent == 1 && !(mysignificand & 0x400)) | |
| myexponent = 0; // denormal | |
| } else if (category==fcZero) { | |
| myexponent = 0; | |
| mysignificand = 0; | |
| } else if (category==fcInfinity) { | |
| myexponent = 0x1f; | |
| mysignificand = 0; | |
| } else { | |
| assert(category == fcNaN && "Unknown category!"); | |
| myexponent = 0x1f; | |
| mysignificand = (uint32_t)*significandParts(); | |
| } | |
| return APInt(16, (((sign&1) << 15) | ((myexponent&0x1f) << 10) | | |
| (mysignificand & 0x3ff))); | |
| } | |
| // This function creates an APInt that is just a bit map of the floating | |
| // point constant as it would appear in memory. It is not a conversion, | |
| // and treating the result as a normal integer is unlikely to be useful. | |
| APInt | |
| APFloat::bitcastToAPInt() const | |
| { | |
| if (semantics == (const llvm::fltSemantics*)&IEEEhalf) | |
| return convertHalfAPFloatToAPInt(); | |
| if (semantics == (const llvm::fltSemantics*)&IEEEsingle) | |
| return convertFloatAPFloatToAPInt(); | |
| if (semantics == (const llvm::fltSemantics*)&IEEEdouble) | |
| return convertDoubleAPFloatToAPInt(); | |
| if (semantics == (const llvm::fltSemantics*)&IEEEquad) | |
| return convertQuadrupleAPFloatToAPInt(); | |
| if (semantics == (const llvm::fltSemantics*)&PPCDoubleDouble) | |
| return convertPPCDoubleDoubleAPFloatToAPInt(); | |
| assert(semantics == (const llvm::fltSemantics*)&x87DoubleExtended && | |
| "unknown format!"); | |
| return convertF80LongDoubleAPFloatToAPInt(); | |
| } | |
| float | |
| APFloat::convertToFloat() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEsingle && | |
| "Float semantics are not IEEEsingle"); | |
| APInt api = bitcastToAPInt(); | |
| return api.bitsToFloat(); | |
| } | |
| double | |
| APFloat::convertToDouble() const | |
| { | |
| assert(semantics == (const llvm::fltSemantics*)&IEEEdouble && | |
| "Float semantics are not IEEEdouble"); | |
| APInt api = bitcastToAPInt(); | |
| return api.bitsToDouble(); | |
| } | |
| /// Integer bit is explicit in this format. Intel hardware (387 and later) | |
| /// does not support these bit patterns: | |
| /// exponent = all 1's, integer bit 0, significand 0 ("pseudoinfinity") | |
| /// exponent = all 1's, integer bit 0, significand nonzero ("pseudoNaN") | |
| /// exponent = 0, integer bit 1 ("pseudodenormal") | |
| /// exponent!=0 nor all 1's, integer bit 0 ("unnormal") | |
| /// At the moment, the first two are treated as NaNs, the second two as Normal. | |
| void | |
| APFloat::initFromF80LongDoubleAPInt(const APInt &api) | |
| { | |
| assert(api.getBitWidth()==80); | |
| uint64_t i1 = api.getRawData()[0]; | |
| uint64_t i2 = api.getRawData()[1]; | |
| uint64_t myexponent = (i2 & 0x7fff); | |
| uint64_t mysignificand = i1; | |
| initialize(&APFloat::x87DoubleExtended); | |
| assert(partCount()==2); | |
| sign = static_cast<unsigned int>(i2>>15); | |
| if (myexponent==0 && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcZero; | |
| } else if (myexponent==0x7fff && mysignificand==0x8000000000000000ULL) { | |
| // exponent, significand meaningless | |
| category = fcInfinity; | |
| } else if (myexponent==0x7fff && mysignificand!=0x8000000000000000ULL) { | |
| // exponent meaningless | |
| category = fcNaN; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = 0; | |
| } else { | |
| category = fcNormal; | |
| exponent = myexponent - 16383; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = 0; | |
| if (myexponent==0) // denormal | |
| exponent = -16382; | |
| } | |
| } | |
| void | |
| APFloat::initFromPPCDoubleDoubleAPInt(const APInt &api) | |
| { | |
| assert(api.getBitWidth()==128); | |
| uint64_t i1 = api.getRawData()[0]; | |
| uint64_t i2 = api.getRawData()[1]; | |
| uint64_t myexponent = (i1 >> 52) & 0x7ff; | |
| uint64_t mysignificand = i1 & 0xfffffffffffffLL; | |
| uint64_t myexponent2 = (i2 >> 52) & 0x7ff; | |
| uint64_t mysignificand2 = i2 & 0xfffffffffffffLL; | |
| initialize(&APFloat::PPCDoubleDouble); | |
| assert(partCount()==2); | |
| sign = static_cast<unsigned int>(i1>>63); | |
| sign2 = static_cast<unsigned int>(i2>>63); | |
| if (myexponent==0 && mysignificand==0) { | |
| // exponent, significand meaningless | |
| // exponent2 and significand2 are required to be 0; we don't check | |
| category = fcZero; | |
| } else if (myexponent==0x7ff && mysignificand==0) { | |
| // exponent, significand meaningless | |
| // exponent2 and significand2 are required to be 0; we don't check | |
| category = fcInfinity; | |
| } else if (myexponent==0x7ff && mysignificand!=0) { | |
| // exponent meaningless. So is the whole second word, but keep it | |
| // for determinism. | |
| category = fcNaN; | |
| exponent2 = myexponent2; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = mysignificand2; | |
| } else { | |
| category = fcNormal; | |
| // Note there is no category2; the second word is treated as if it is | |
| // fcNormal, although it might be something else considered by itself. | |
| exponent = myexponent - 1023; | |
| exponent2 = myexponent2 - 1023; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = mysignificand2; | |
| if (myexponent==0) // denormal | |
| exponent = -1022; | |
| else | |
| significandParts()[0] |= 0x10000000000000LL; // integer bit | |
| if (myexponent2==0) | |
| exponent2 = -1022; | |
| else | |
| significandParts()[1] |= 0x10000000000000LL; // integer bit | |
| } | |
| } | |
| void | |
| APFloat::initFromQuadrupleAPInt(const APInt &api) | |
| { | |
| assert(api.getBitWidth()==128); | |
| uint64_t i1 = api.getRawData()[0]; | |
| uint64_t i2 = api.getRawData()[1]; | |
| uint64_t myexponent = (i2 >> 48) & 0x7fff; | |
| uint64_t mysignificand = i1; | |
| uint64_t mysignificand2 = i2 & 0xffffffffffffLL; | |
| initialize(&APFloat::IEEEquad); | |
| assert(partCount()==2); | |
| sign = static_cast<unsigned int>(i2>>63); | |
| if (myexponent==0 && | |
| (mysignificand==0 && mysignificand2==0)) { | |
| // exponent, significand meaningless | |
| category = fcZero; | |
| } else if (myexponent==0x7fff && | |
| (mysignificand==0 && mysignificand2==0)) { | |
| // exponent, significand meaningless | |
| category = fcInfinity; | |
| } else if (myexponent==0x7fff && | |
| (mysignificand!=0 || mysignificand2 !=0)) { | |
| // exponent meaningless | |
| category = fcNaN; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = mysignificand2; | |
| } else { | |
| category = fcNormal; | |
| exponent = myexponent - 16383; | |
| significandParts()[0] = mysignificand; | |
| significandParts()[1] = mysignificand2; | |
| if (myexponent==0) // denormal | |
| exponent = -16382; | |
| else | |
| significandParts()[1] |= 0x1000000000000LL; // integer bit | |
| } | |
| } | |
| void | |
| APFloat::initFromDoubleAPInt(const APInt &api) | |
| { | |
| assert(api.getBitWidth()==64); | |
| uint64_t i = *api.getRawData(); | |
| uint64_t myexponent = (i >> 52) & 0x7ff; | |
| uint64_t mysignificand = i & 0xfffffffffffffLL; | |
| initialize(&APFloat::IEEEdouble); | |
| assert(partCount()==1); | |
| sign = static_cast<unsigned int>(i>>63); | |
| if (myexponent==0 && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcZero; | |
| } else if (myexponent==0x7ff && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcInfinity; | |
| } else if (myexponent==0x7ff && mysignificand!=0) { | |
| // exponent meaningless | |
| category = fcNaN; | |
| *significandParts() = mysignificand; | |
| } else { | |
| category = fcNormal; | |
| exponent = myexponent - 1023; | |
| *significandParts() = mysignificand; | |
| if (myexponent==0) // denormal | |
| exponent = -1022; | |
| else | |
| *significandParts() |= 0x10000000000000LL; // integer bit | |
| } | |
| } | |
| void | |
| APFloat::initFromFloatAPInt(const APInt & api) | |
| { | |
| assert(api.getBitWidth()==32); | |
| uint32_t i = (uint32_t)*api.getRawData(); | |
| uint32_t myexponent = (i >> 23) & 0xff; | |
| uint32_t mysignificand = i & 0x7fffff; | |
| initialize(&APFloat::IEEEsingle); | |
| assert(partCount()==1); | |
| sign = i >> 31; | |
| if (myexponent==0 && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcZero; | |
| } else if (myexponent==0xff && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcInfinity; | |
| } else if (myexponent==0xff && mysignificand!=0) { | |
| // sign, exponent, significand meaningless | |
| category = fcNaN; | |
| *significandParts() = mysignificand; | |
| } else { | |
| category = fcNormal; | |
| exponent = myexponent - 127; //bias | |
| *significandParts() = mysignificand; | |
| if (myexponent==0) // denormal | |
| exponent = -126; | |
| else | |
| *significandParts() |= 0x800000; // integer bit | |
| } | |
| } | |
| void | |
| APFloat::initFromHalfAPInt(const APInt & api) | |
| { | |
| assert(api.getBitWidth()==16); | |
| uint32_t i = (uint32_t)*api.getRawData(); | |
| uint32_t myexponent = (i >> 10) & 0x1f; | |
| uint32_t mysignificand = i & 0x3ff; | |
| initialize(&APFloat::IEEEhalf); | |
| assert(partCount()==1); | |
| sign = i >> 15; | |
| if (myexponent==0 && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcZero; | |
| } else if (myexponent==0x1f && mysignificand==0) { | |
| // exponent, significand meaningless | |
| category = fcInfinity; | |
| } else if (myexponent==0x1f && mysignificand!=0) { | |
| // sign, exponent, significand meaningless | |
| category = fcNaN; | |
| *significandParts() = mysignificand; | |
| } else { | |
| category = fcNormal; | |
| exponent = myexponent - 15; //bias | |
| *significandParts() = mysignificand; | |
| if (myexponent==0) // denormal | |
| exponent = -14; | |
| else | |
| *significandParts() |= 0x400; // integer bit | |
| } | |
| } | |
| /// Treat api as containing the bits of a floating point number. Currently | |
| /// we infer the floating point type from the size of the APInt. The | |
| /// isIEEE argument distinguishes between PPC128 and IEEE128 (not meaningful | |
| /// when the size is anything else). | |
| void | |
| APFloat::initFromAPInt(const APInt& api, bool isIEEE) | |
| { | |
| if (api.getBitWidth() == 16) | |
| return initFromHalfAPInt(api); | |
| else if (api.getBitWidth() == 32) | |
| return initFromFloatAPInt(api); | |
| else if (api.getBitWidth()==64) | |
| return initFromDoubleAPInt(api); | |
| else if (api.getBitWidth()==80) | |
| return initFromF80LongDoubleAPInt(api); | |
| else if (api.getBitWidth()==128) | |
| return (isIEEE ? | |
| initFromQuadrupleAPInt(api) : initFromPPCDoubleDoubleAPInt(api)); | |
| else | |
| llvm_unreachable(0); | |
| } | |
| APFloat | |
| APFloat::getAllOnesValue(unsigned BitWidth, bool isIEEE) | |
| { | |
| return APFloat(APInt::getAllOnesValue(BitWidth), isIEEE); | |
| } | |
| APFloat APFloat::getLargest(const fltSemantics &Sem, bool Negative) { | |
| APFloat Val(Sem, fcNormal, Negative); | |
| // We want (in interchange format): | |
| // sign = {Negative} | |
| // exponent = 1..10 | |
| // significand = 1..1 | |
| Val.exponent = Sem.maxExponent; // unbiased | |
| // 1-initialize all bits.... | |
| Val.zeroSignificand(); | |
| integerPart *significand = Val.significandParts(); | |
| unsigned N = partCountForBits(Sem.precision); | |
| for (unsigned i = 0; i != N; ++i) | |
| significand[i] = ~((integerPart) 0); | |
| // ...and then clear the top bits for internal consistency. | |
| if (Sem.precision % integerPartWidth != 0) | |
| significand[N-1] &= | |
| (((integerPart) 1) << (Sem.precision % integerPartWidth)) - 1; | |
| return Val; | |
| } | |
| APFloat APFloat::getSmallest(const fltSemantics &Sem, bool Negative) { | |
| APFloat Val(Sem, fcNormal, Negative); | |
| // We want (in interchange format): | |
| // sign = {Negative} | |
| // exponent = 0..0 | |
| // significand = 0..01 | |
| Val.exponent = Sem.minExponent; // unbiased | |
| Val.zeroSignificand(); | |
| Val.significandParts()[0] = 1; | |
| return Val; | |
| } | |
| APFloat APFloat::getSmallestNormalized(const fltSemantics &Sem, bool Negative) { | |
| APFloat Val(Sem, fcNormal, Negative); | |
| // We want (in interchange format): | |
| // sign = {Negative} | |
| // exponent = 0..0 | |
| // significand = 10..0 | |
| Val.exponent = Sem.minExponent; | |
| Val.zeroSignificand(); | |
| Val.significandParts()[partCountForBits(Sem.precision)-1] |= | |
| (((integerPart) 1) << ((Sem.precision - 1) % integerPartWidth)); | |
| return Val; | |
| } | |
| APFloat::APFloat(const APInt& api, bool isIEEE) : exponent2(0), sign2(0) { | |
| initFromAPInt(api, isIEEE); | |
| } | |
| APFloat::APFloat(float f) : exponent2(0), sign2(0) { | |
| initFromAPInt(APInt::floatToBits(f)); | |
| } | |
| APFloat::APFloat(double d) : exponent2(0), sign2(0) { | |
| initFromAPInt(APInt::doubleToBits(d)); | |
| } | |
| namespace { | |
| static void append(SmallVectorImpl<char> &Buffer, | |
| unsigned N, const char *Str) { | |
| unsigned Start = Buffer.size(); | |
| Buffer.set_size(Start + N); | |
| memcpy(&Buffer[Start], Str, N); | |
| } | |
| template <unsigned N> | |
| void append(SmallVectorImpl<char> &Buffer, const char (&Str)[N]) { | |
| append(Buffer, N, Str); | |
| } | |
| /// Removes data from the given significand until it is no more | |
| /// precise than is required for the desired precision. | |
| void AdjustToPrecision(APInt &significand, | |
| int &exp, unsigned FormatPrecision) { | |
| unsigned bits = significand.getActiveBits(); | |
| // 196/59 is a very slight overestimate of lg_2(10). | |
| unsigned bitsRequired = (FormatPrecision * 196 + 58) / 59; | |
| if (bits <= bitsRequired) return; | |
| unsigned tensRemovable = (bits - bitsRequired) * 59 / 196; | |
| if (!tensRemovable) return; | |
| exp += tensRemovable; | |
| APInt divisor(significand.getBitWidth(), 1); | |
| APInt powten(significand.getBitWidth(), 10); | |
| while (true) { | |
| if (tensRemovable & 1) | |
| divisor *= powten; | |
| tensRemovable >>= 1; | |
| if (!tensRemovable) break; | |
| powten *= powten; | |
| } | |
| significand = significand.udiv(divisor); | |
| // Truncate the significand down to its active bit count, but | |
| // don't try to drop below 32. | |
| unsigned newPrecision = std::max(32U, significand.getActiveBits()); | |
| significand = significand.trunc(newPrecision); | |
| } | |
| void AdjustToPrecision(SmallVectorImpl<char> &buffer, | |
| int &exp, unsigned FormatPrecision) { | |
| unsigned N = buffer.size(); | |
| if (N <= FormatPrecision) return; | |
| // The most significant figures are the last ones in the buffer. | |
| unsigned FirstSignificant = N - FormatPrecision; | |
| // Round. | |
| // FIXME: this probably shouldn't use 'round half up'. | |
| // Rounding down is just a truncation, except we also want to drop | |
| // trailing zeros from the new result. | |
| if (buffer[FirstSignificant - 1] < '5') { | |
| while (buffer[FirstSignificant] == '0') | |
| FirstSignificant++; | |
| exp += FirstSignificant; | |
| buffer.erase(&buffer[0], &buffer[FirstSignificant]); | |
| return; | |
| } | |
| // Rounding up requires a decimal add-with-carry. If we continue | |
| // the carry, the newly-introduced zeros will just be truncated. | |
| for (unsigned I = FirstSignificant; I != N; ++I) { | |
| if (buffer[I] == '9') { | |
| FirstSignificant++; | |
| } else { | |
| buffer[I]++; | |
| break; | |
| } | |
| } | |
| // If we carried through, we have exactly one digit of precision. | |
| if (FirstSignificant == N) { | |
| exp += FirstSignificant; | |
| buffer.clear(); | |
| buffer.push_back('1'); | |
| return; | |
| } | |
| exp += FirstSignificant; | |
| buffer.erase(&buffer[0], &buffer[FirstSignificant]); | |
| } | |
| } | |
| void APFloat::toString(SmallVectorImpl<char> &Str, | |
| unsigned FormatPrecision, | |
| unsigned FormatMaxPadding) const { | |
| switch (category) { | |
| case fcInfinity: | |
| if (isNegative()) | |
| return append(Str, "-Inf"); | |
| else | |
| return append(Str, "+Inf"); | |
| case fcNaN: return append(Str, "NaN"); | |
| case fcZero: | |
| if (isNegative()) | |
| Str.push_back('-'); | |
| if (!FormatMaxPadding) | |
| append(Str, "0.0E+0"); | |
| else | |
| Str.push_back('0'); | |
| return; | |
| case fcNormal: | |
| break; | |
| } | |
| if (isNegative()) | |
| Str.push_back('-'); | |
| // Decompose the number into an APInt and an exponent. | |
| int exp = exponent - ((int) semantics->precision - 1); | |
| APInt significand(semantics->precision, | |
| makeArrayRef(significandParts(), | |
| partCountForBits(semantics->precision))); | |
| // Set FormatPrecision if zero. We want to do this before we | |
| // truncate trailing zeros, as those are part of the precision. | |
| if (!FormatPrecision) { | |
| // It's an interesting question whether to use the nominal | |
| // precision or the active precision here for denormals. | |
| // FormatPrecision = ceil(significandBits / lg_2(10)) | |
| FormatPrecision = (semantics->precision * 59 + 195) / 196; | |
| } | |
| // Ignore trailing binary zeros. | |
| int trailingZeros = significand.countTrailingZeros(); | |
| exp += trailingZeros; | |
| significand = significand.lshr(trailingZeros); | |
| // Change the exponent from 2^e to 10^e. | |
| if (exp == 0) { | |
| // Nothing to do. | |
| } else if (exp > 0) { | |
| // Just shift left. | |
| significand = significand.zext(semantics->precision + exp); | |
| significand <<= exp; | |
| exp = 0; | |
| } else { /* exp < 0 */ | |
| int texp = -exp; | |
| // We transform this using the identity: | |
| // (N)(2^-e) == (N)(5^e)(10^-e) | |
| // This means we have to multiply N (the significand) by 5^e. | |
| // To avoid overflow, we have to operate on numbers large | |
| // enough to store N * 5^e: | |
| // log2(N * 5^e) == log2(N) + e * log2(5) | |
| // <= semantics->precision + e * 137 / 59 | |
| // (log_2(5) ~ 2.321928 < 2.322034 ~ 137/59) | |
| unsigned precision = semantics->precision + (137 * texp + 136) / 59; | |
| // Multiply significand by 5^e. | |
| // N * 5^0101 == N * 5^(1*1) * 5^(0*2) * 5^(1*4) * 5^(0*8) | |
| significand = significand.zext(precision); | |
| APInt five_to_the_i(precision, 5); | |
| while (true) { | |
| if (texp & 1) significand *= five_to_the_i; | |
| texp >>= 1; | |
| if (!texp) break; | |
| five_to_the_i *= five_to_the_i; | |
| } | |
| } | |
| AdjustToPrecision(significand, exp, FormatPrecision); | |
| llvm::SmallVector<char, 256> buffer; | |
| // Fill the buffer. | |
| unsigned precision = significand.getBitWidth(); | |
| APInt ten(precision, 10); | |
| APInt digit(precision, 0); | |
| bool inTrail = true; | |
| while (significand != 0) { | |
| // digit <- significand % 10 | |
| // significand <- significand / 10 | |
| APInt::udivrem(significand, ten, significand, digit); | |
| unsigned d = digit.getZExtValue(); | |
| // Drop trailing zeros. | |
| if (inTrail && !d) exp++; | |
| else { | |
| buffer.push_back((char) ('0' + d)); | |
| inTrail = false; | |
| } | |
| } | |
| assert(!buffer.empty() && "no characters in buffer!"); | |
| // Drop down to FormatPrecision. | |
| // TODO: don't do more precise calculations above than are required. | |
| AdjustToPrecision(buffer, exp, FormatPrecision); | |
| unsigned NDigits = buffer.size(); | |
| // Check whether we should use scientific notation. | |
| bool FormatScientific; | |
| if (!FormatMaxPadding) | |
| FormatScientific = true; | |
| else { | |
| if (exp >= 0) { | |
| // 765e3 --> 765000 | |
| // ^^^ | |
| // But we shouldn't make the number look more precise than it is. | |
| FormatScientific = ((unsigned) exp > FormatMaxPadding || | |
| NDigits + (unsigned) exp > FormatPrecision); | |
| } else { | |
| // Power of the most significant digit. | |
| int MSD = exp + (int) (NDigits - 1); | |
| if (MSD >= 0) { | |
| // 765e-2 == 7.65 | |
| FormatScientific = false; | |
| } else { | |
| // 765e-5 == 0.00765 | |
| // ^ ^^ | |
| FormatScientific = ((unsigned) -MSD) > FormatMaxPadding; | |
| } | |
| } | |
| } | |
| // Scientific formatting is pretty straightforward. | |
| if (FormatScientific) { | |
| exp += (NDigits - 1); | |
| Str.push_back(buffer[NDigits-1]); | |
| Str.push_back('.'); | |
| if (NDigits == 1) | |
| Str.push_back('0'); | |
| else | |
| for (unsigned I = 1; I != NDigits; ++I) | |
| Str.push_back(buffer[NDigits-1-I]); | |
| Str.push_back('E'); | |
| Str.push_back(exp >= 0 ? '+' : '-'); | |
| if (exp < 0) exp = -exp; | |
| SmallVector<char, 6> expbuf; | |
| do { | |
| expbuf.push_back((char) ('0' + (exp % 10))); | |
| exp /= 10; | |
| } while (exp); | |
| for (unsigned I = 0, E = expbuf.size(); I != E; ++I) | |
| Str.push_back(expbuf[E-1-I]); | |
| return; | |
| } | |
| // Non-scientific, positive exponents. | |
| if (exp >= 0) { | |
| for (unsigned I = 0; I != NDigits; ++I) | |
| Str.push_back(buffer[NDigits-1-I]); | |
| for (unsigned I = 0; I != (unsigned) exp; ++I) | |
| Str.push_back('0'); | |
| return; | |
| } | |
| // Non-scientific, negative exponents. | |
| // The number of digits to the left of the decimal point. | |
| int NWholeDigits = exp + (int) NDigits; | |
| unsigned I = 0; | |
| if (NWholeDigits > 0) { | |
| for (; I != (unsigned) NWholeDigits; ++I) | |
| Str.push_back(buffer[NDigits-I-1]); | |
| Str.push_back('.'); | |
| } else { | |
| unsigned NZeros = 1 + (unsigned) -NWholeDigits; | |
| Str.push_back('0'); | |
| Str.push_back('.'); | |
| for (unsigned Z = 1; Z != NZeros; ++Z) | |
| Str.push_back('0'); | |
| } | |
| for (; I != NDigits; ++I) | |
| Str.push_back(buffer[NDigits-I-1]); | |
| } | |
| bool APFloat::getExactInverse(APFloat *inv) const { | |
| // We can only guarantee the existence of an exact inverse for IEEE floats. | |
| if (semantics != &IEEEhalf && semantics != &IEEEsingle && | |
| semantics != &IEEEdouble && semantics != &IEEEquad) | |
| return false; | |
| // Special floats and denormals have no exact inverse. | |
| if (category != fcNormal) | |
| return false; | |
| // Check that the number is a power of two by making sure that only the | |
| // integer bit is set in the significand. | |
| if (significandLSB() != semantics->precision - 1) | |
| return false; | |
| // Get the inverse. | |
| APFloat reciprocal(*semantics, 1ULL); | |
| if (reciprocal.divide(*this, rmNearestTiesToEven) != opOK) | |
| return false; | |
| // Avoid multiplication with a denormal, it is not safe on all platforms and | |
| // may be slower than a normal division. | |
| if (reciprocal.significandMSB() + 1 < reciprocal.semantics->precision) | |
| return false; | |
| assert(reciprocal.category == fcNormal && | |
| reciprocal.significandLSB() == reciprocal.semantics->precision - 1); | |
| if (inv) | |
| *inv = reciprocal; | |
| return true; | |
| } |