| ; RUN: llc -march=mips -relocation-model=static < %s | FileCheck --check-prefixes=ALL,SYM32,O32 %s |
| ; RUN: llc -march=mipsel -relocation-model=static < %s | FileCheck --check-prefixes=ALL,SYM32,O32 %s |
| |
| ; RUN-TODO: llc -march=mips64 -relocation-model=static -target-abi n32 < %s | FileCheck --check-prefixes=ALL,SYM32,O32 %s |
| ; RUN-TODO: llc -march=mips64el -relocation-model=static -target-abi n32 < %s | FileCheck --check-prefixes=ALL,SYM32,O32 %s |
| |
| ; RUN: llc -march=mips64 -relocation-model=static -target-abi n32 < %s | FileCheck --check-prefixes=ALL,SYM32,NEW %s |
| ; RUN: llc -march=mips64el -relocation-model=static -target-abi n32 < %s | FileCheck --check-prefixes=ALL,SYM32,NEW %s |
| |
| ; RUN: llc -march=mips64 -relocation-model=static -target-abi n64 < %s | FileCheck --check-prefixes=ALL,SYM64,NEW %s |
| ; RUN: llc -march=mips64el -relocation-model=static -target-abi n64 < %s | FileCheck --check-prefixes=ALL,SYM64,NEW %s |
| |
| ; Test the integer arguments for all ABI's and byte orders as specified by |
| ; section 5 of MD00305 (MIPS ABIs Described). |
| ; |
| ; N32/N64 are identical in this area so their checks have been combined into |
| ; the 'NEW' prefix (the N stands for New). |
| ; |
| ; Varargs are covered in arguments-hard-float-varargs.ll. |
| |
| @bytes = global [11 x i8] zeroinitializer |
| @dwords = global [11 x i64] zeroinitializer |
| @floats = global [11 x float] zeroinitializer |
| @doubles = global [11 x double] zeroinitializer |
| |
| define void @align_to_arg_slots(i8 signext %a, i8 signext %b, i8 signext %c, |
| i8 signext %d, i8 signext %e, i8 signext %f, |
| i8 signext %g, i8 signext %h, i8 signext %i, |
| i8 signext %j) nounwind { |
| entry: |
| %0 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 1 |
| store volatile i8 %a, i8* %0 |
| %1 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 2 |
| store volatile i8 %b, i8* %1 |
| %2 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 3 |
| store volatile i8 %c, i8* %2 |
| %3 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 4 |
| store volatile i8 %d, i8* %3 |
| %4 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 5 |
| store volatile i8 %e, i8* %4 |
| %5 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 6 |
| store volatile i8 %f, i8* %5 |
| %6 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 7 |
| store volatile i8 %g, i8* %6 |
| %7 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 8 |
| store volatile i8 %h, i8* %7 |
| %8 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 9 |
| store volatile i8 %i, i8* %8 |
| %9 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 10 |
| store volatile i8 %j, i8* %9 |
| ret void |
| } |
| |
| ; ALL-LABEL: align_to_arg_slots: |
| ; We won't test the way the global address is calculated in this test. This is |
| ; just to get the register number for the other checks. |
| ; SYM32-DAG: addiu [[R1:\$[0-9]+]], ${{[0-9]+}}, %lo(bytes) |
| ; SYM64-DAG: daddiu [[R1:\$[0-9]+]], ${{[0-9]+}}, %lo(bytes) |
| |
| ; The first four arguments are the same in O32/N32/N64 |
| ; ALL-DAG: sb $4, 1([[R1]]) |
| ; ALL-DAG: sb $5, 2([[R1]]) |
| ; ALL-DAG: sb $6, 3([[R1]]) |
| ; ALL-DAG: sb $7, 4([[R1]]) |
| |
| ; N32/N64 get an extra four arguments in registers |
| ; O32 starts loading from the stack. The addresses start at 16 because space is |
| ; always reserved for the first four arguments. |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 16($sp) |
| ; O32-DAG: sb [[R3]], 5([[R1]]) |
| ; NEW-DAG: sb $8, 5([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 20($sp) |
| ; O32-DAG: sb [[R3]], 6([[R1]]) |
| ; NEW-DAG: sb $9, 6([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 24($sp) |
| ; O32-DAG: sb [[R3]], 7([[R1]]) |
| ; NEW-DAG: sb $10, 7([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 28($sp) |
| ; O32-DAG: sb [[R3]], 8([[R1]]) |
| ; NEW-DAG: sb $11, 8([[R1]]) |
| |
| ; O32/N32/N64 are accessing the stack at this point. |
| ; Unlike O32, N32/N64 do not reserve space for the arguments. |
| ; increase by 4 for O32 and 8 for N32/N64. |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 32($sp) |
| ; O32-DAG: sb [[R3]], 9([[R1]]) |
| ; NEW-DAG: ld [[R3:\$[0-9]+]], 0($sp) |
| ; NEW-DAG: sb [[R3]], 9([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 36($sp) |
| ; O32-DAG: sb [[R3]], 10([[R1]]) |
| ; NEW-DAG: ld [[R3:\$[0-9]+]], 8($sp) |
| ; NEW-DAG: sb [[R3]], 10([[R1]]) |
| |
| define void @slot_skipping(i8 signext %a, i64 signext %b, i8 signext %c, |
| i8 signext %d, i8 signext %e, i8 signext %f, |
| i8 signext %g, i64 signext %i, i8 signext %j) nounwind { |
| entry: |
| %0 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 1 |
| store volatile i8 %a, i8* %0 |
| %1 = getelementptr [11 x i64], [11 x i64]* @dwords, i32 0, i32 1 |
| store volatile i64 %b, i64* %1 |
| %2 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 2 |
| store volatile i8 %c, i8* %2 |
| %3 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 3 |
| store volatile i8 %d, i8* %3 |
| %4 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 4 |
| store volatile i8 %e, i8* %4 |
| %5 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 5 |
| store volatile i8 %f, i8* %5 |
| %6 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 6 |
| store volatile i8 %g, i8* %6 |
| %7 = getelementptr [11 x i64], [11 x i64]* @dwords, i32 0, i32 2 |
| store volatile i64 %i, i64* %7 |
| %8 = getelementptr [11 x i8], [11 x i8]* @bytes, i32 0, i32 7 |
| store volatile i8 %j, i8* %8 |
| ret void |
| } |
| |
| ; ALL-LABEL: slot_skipping: |
| ; We won't test the way the global address is calculated in this test. This is |
| ; just to get the register number for the other checks. |
| ; SYM32-DAG: addiu [[R1:\$[0-9]+]], ${{[0-9]+}}, %lo(bytes) |
| ; SYM64-DAG: daddiu [[R1:\$[0-9]+]], ${{[0-9]+}}, %lo(bytes) |
| ; SYM32-DAG: addiu [[R2:\$[0-9]+]], ${{[0-9]+}}, %lo(dwords) |
| ; SYM64-DAG: daddiu [[R2:\$[0-9]+]], ${{[0-9]+}}, %lo(dwords) |
| |
| ; The first argument is the same in O32/N32/N64. |
| ; ALL-DAG: sb $4, 1([[R1]]) |
| |
| ; The second slot is insufficiently aligned for i64 on O32 so it is skipped. |
| ; Also, i64 occupies two slots on O32 and only one for N32/N64. |
| ; O32-DAG: sw $6, 8([[R2]]) |
| ; O32-DAG: sw $7, 12([[R2]]) |
| ; NEW-DAG: sd $5, 8([[R2]]) |
| |
| ; N32/N64 get an extra four arguments in registers and still have two left from |
| ; the first four. |
| ; O32 starts loading from the stack. The addresses start at 16 because space is |
| ; always reserved for the first four arguments. |
| ; It's not clear why O32 uses lbu for this argument, but it's not wrong so we'll |
| ; accept it for now. The only IR difference is that this argument has |
| ; anyext from i8 and align 8 on it. |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 16($sp) |
| ; O32-DAG: sb [[R3]], 2([[R1]]) |
| ; NEW-DAG: sb $6, 2([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 20($sp) |
| ; O32-DAG: sb [[R3]], 3([[R1]]) |
| ; NEW-DAG: sb $7, 3([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 24($sp) |
| ; O32-DAG: sb [[R3]], 4([[R1]]) |
| ; NEW-DAG: sb $8, 4([[R1]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 28($sp) |
| ; O32-DAG: sb [[R3]], 5([[R1]]) |
| ; NEW-DAG: sb $9, 5([[R1]]) |
| |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 32($sp) |
| ; O32-DAG: sb [[R3]], 6([[R1]]) |
| ; NEW-DAG: sb $10, 6([[R1]]) |
| |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 40($sp) |
| ; O32-DAG: sw [[R3]], 16([[R2]]) |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 44($sp) |
| ; O32-DAG: sw [[R3]], 20([[R2]]) |
| ; NEW-DAG: sd $11, 16([[R2]]) |
| |
| ; O32/N32/N64 are accessing the stack at this point. |
| ; Unlike O32, N32/N64 do not reserve space for the arguments. |
| ; increase by 4 for O32 and 8 for N32/N64. |
| ; O32-DAG: lw [[R3:\$[0-9]+]], 48($sp) |
| ; O32-DAG: sb [[R3]], 7([[R1]]) |
| ; NEW-DAG: ld [[R3:\$[0-9]+]], 0($sp) |
| ; NEW-DAG: sb [[R3]], 7([[R1]]) |