| // Copyright (c) 2018 Google LLC. |
| // Modifications Copyright (C) 2020 Advanced Micro Devices, Inc. All rights |
| // reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Tests validation rules of GLSL.450.std and OpenCL.std extended instructions. |
| // Doesn't test OpenCL.std vector size 2, 3, 4, 8 or 16 rules (not supported |
| // by standard SPIR-V). |
| |
| #include <cstring> |
| #include <sstream> |
| #include <string> |
| #include <tuple> |
| #include <utility> |
| #include <vector> |
| |
| #include "gmock/gmock.h" |
| #include "source/spirv_target_env.h" |
| #include "test/unit_spirv.h" |
| #include "test/val/val_code_generator.h" |
| #include "test/val/val_fixtures.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| struct TestResult { |
| TestResult(spv_result_t in_validation_result = SPV_SUCCESS, |
| const char* in_error_str = nullptr, |
| const char* in_error_str2 = nullptr) |
| : validation_result(in_validation_result), |
| error_str(in_error_str), |
| error_str2(in_error_str2) {} |
| spv_result_t validation_result; |
| const char* error_str; |
| const char* error_str2; |
| }; |
| |
| using ::testing::Combine; |
| using ::testing::HasSubstr; |
| using ::testing::Not; |
| using ::testing::Values; |
| using ::testing::ValuesIn; |
| |
| using ValidateBuiltIns = spvtest::ValidateBase<bool>; |
| using ValidateVulkanSubgroupBuiltIns = |
| spvtest::ValidateBase<std::tuple<const char*, const char*, const char*, |
| const char*, const char*, TestResult>>; |
| using ValidateVulkanCombineBuiltInExecutionModelDataTypeResult = |
| spvtest::ValidateBase<std::tuple<const char*, const char*, const char*, |
| const char*, const char*, TestResult>>; |
| using ValidateVulkanCombineBuiltInArrayedVariable = |
| spvtest::ValidateBase<std::tuple<const char*, const char*, const char*, |
| const char*, const char*, TestResult>>; |
| using ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult = |
| spvtest::ValidateBase< |
| std::tuple<const char*, const char*, const char*, const char*, |
| const char*, const char*, const char*, TestResult>>; |
| |
| using ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult = |
| spvtest::ValidateBase<std::tuple<spv_target_env, const char*, const char*, |
| const char*, const char*, const char*, |
| const char*, const char*, TestResult>>; |
| |
| bool InitializerRequired(const char* const storage_class) { |
| return (strncmp(storage_class, "Output", 6) == 0 || |
| strncmp(storage_class, "Private", 7) == 0 || |
| strncmp(storage_class, "Function", 8) == 0); |
| } |
| |
| CodeGenerator GetInMainCodeGenerator(const char* const built_in, |
| const char* const execution_model, |
| const char* const storage_class, |
| const char* const capabilities, |
| const char* const extensions, |
| const char* const data_type) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| if (capabilities) { |
| generator.capabilities_ += capabilities; |
| } |
| if (extensions) { |
| generator.extensions_ += extensions; |
| } |
| |
| generator.before_types_ = R"(OpDecorate %built_in_type Block |
| OpMemberDecorate %built_in_type 0 BuiltIn )"; |
| generator.before_types_ += built_in; |
| generator.before_types_ += "\n"; |
| |
| std::ostringstream after_types; |
| |
| after_types << "%built_in_type = OpTypeStruct " << data_type << "\n"; |
| if (InitializerRequired(storage_class)) { |
| after_types << "%built_in_null = OpConstantNull %built_in_type\n"; |
| } |
| after_types << "%built_in_ptr = OpTypePointer " << storage_class |
| << " %built_in_type\n"; |
| after_types << "%built_in_var = OpVariable %built_in_ptr " << storage_class; |
| if (InitializerRequired(storage_class)) { |
| after_types << " %built_in_null"; |
| } |
| after_types << "\n"; |
| after_types << "%data_ptr = OpTypePointer " << storage_class << " " |
| << data_type << "\n"; |
| generator.after_types_ = after_types.str(); |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = execution_model; |
| if (strncmp(storage_class, "Input", 5) == 0 || |
| strncmp(storage_class, "Output", 6) == 0) { |
| entry_point.interfaces = "%built_in_var"; |
| } |
| |
| std::ostringstream execution_modes; |
| if (0 == std::strcmp(execution_model, "Fragment")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OriginUpperLeft\n"; |
| if (0 == std::strcmp(built_in, "FragDepth")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " DepthReplacing\n"; |
| } |
| } |
| if (0 == std::strcmp(execution_model, "Geometry")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " InputPoints\n"; |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OutputPoints\n"; |
| } |
| if (0 == std::strcmp(execution_model, "GLCompute")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " LocalSize 1 1 1\n"; |
| } |
| entry_point.execution_modes = execution_modes.str(); |
| |
| entry_point.body = R"( |
| %ptr = OpAccessChain %data_ptr %built_in_var %u32_0 |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_P(ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, InMain) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const vuid = std::get<4>(GetParam()); |
| const TestResult& test_result = std::get<5>(GetParam()); |
| |
| CodeGenerator generator = GetInMainCodeGenerator( |
| built_in, execution_model, storage_class, NULL, NULL, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| TEST_P( |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| InMain) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const capabilities = std::get<4>(GetParam()); |
| const char* const extensions = std::get<5>(GetParam()); |
| const char* const vuid = std::get<6>(GetParam()); |
| const TestResult& test_result = std::get<7>(GetParam()); |
| |
| CodeGenerator generator = |
| GetInMainCodeGenerator(built_in, execution_model, storage_class, |
| capabilities, extensions, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| TEST_P( |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| InMain) { |
| const spv_target_env env = std::get<0>(GetParam()); |
| const char* const built_in = std::get<1>(GetParam()); |
| const char* const execution_model = std::get<2>(GetParam()); |
| const char* const storage_class = std::get<3>(GetParam()); |
| const char* const data_type = std::get<4>(GetParam()); |
| const char* const capabilities = std::get<5>(GetParam()); |
| const char* const extensions = std::get<6>(GetParam()); |
| const char* const vuid = std::get<7>(GetParam()); |
| const TestResult& test_result = std::get<8>(GetParam()); |
| |
| CodeGenerator generator = |
| GetInMainCodeGenerator(built_in, execution_model, storage_class, |
| capabilities, extensions, data_type); |
| |
| CompileSuccessfully(generator.Build(), env); |
| ASSERT_EQ(test_result.validation_result, ValidateInstructions(env)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| CodeGenerator GetInFunctionCodeGenerator(const char* const built_in, |
| const char* const execution_model, |
| const char* const storage_class, |
| const char* const capabilities, |
| const char* const extensions, |
| const char* const data_type) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| if (capabilities) { |
| generator.capabilities_ += capabilities; |
| } |
| if (extensions) { |
| generator.extensions_ += extensions; |
| } |
| |
| generator.before_types_ = R"(OpDecorate %built_in_type Block |
| OpMemberDecorate %built_in_type 0 BuiltIn )"; |
| generator.before_types_ += built_in; |
| generator.before_types_ += "\n"; |
| |
| std::ostringstream after_types; |
| after_types << "%built_in_type = OpTypeStruct " << data_type << "\n"; |
| if (InitializerRequired(storage_class)) { |
| after_types << "%built_in_null = OpConstantNull %built_in_type\n"; |
| } |
| after_types << "%built_in_ptr = OpTypePointer " << storage_class |
| << " %built_in_type\n"; |
| after_types << "%built_in_var = OpVariable %built_in_ptr " << storage_class; |
| if (InitializerRequired(storage_class)) { |
| after_types << " %built_in_null"; |
| } |
| after_types << "\n"; |
| after_types << "%data_ptr = OpTypePointer " << storage_class << " " |
| << data_type << "\n"; |
| generator.after_types_ = after_types.str(); |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = execution_model; |
| if (strncmp(storage_class, "Input", 5) == 0 || |
| strncmp(storage_class, "Output", 6) == 0) { |
| entry_point.interfaces = "%built_in_var"; |
| } |
| |
| std::ostringstream execution_modes; |
| if (0 == std::strcmp(execution_model, "Fragment")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OriginUpperLeft\n"; |
| if (0 == std::strcmp(built_in, "FragDepth")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " DepthReplacing\n"; |
| } |
| } |
| if (0 == std::strcmp(execution_model, "Geometry")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " InputPoints\n"; |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OutputPoints\n"; |
| } |
| if (0 == std::strcmp(execution_model, "GLCompute")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " LocalSize 1 1 1\n"; |
| } |
| entry_point.execution_modes = execution_modes.str(); |
| |
| entry_point.body = R"( |
| %val2 = OpFunctionCall %void %foo |
| )"; |
| |
| std::string function_body = R"( |
| %foo = OpFunction %void None %func |
| %foo_entry = OpLabel |
| %ptr = OpAccessChain %data_ptr %built_in_var %u32_0 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| generator.add_at_the_end_ = function_body; |
| |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_P(ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, InFunction) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const vuid = std::get<4>(GetParam()); |
| const TestResult& test_result = std::get<5>(GetParam()); |
| |
| CodeGenerator generator = GetInFunctionCodeGenerator( |
| built_in, execution_model, storage_class, NULL, NULL, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| TEST_P( |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| InFunction) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const capabilities = std::get<4>(GetParam()); |
| const char* const extensions = std::get<5>(GetParam()); |
| const char* const vuid = std::get<6>(GetParam()); |
| const TestResult& test_result = std::get<7>(GetParam()); |
| |
| CodeGenerator generator = |
| GetInFunctionCodeGenerator(built_in, execution_model, storage_class, |
| capabilities, extensions, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| CodeGenerator GetVariableCodeGenerator(const char* const built_in, |
| const char* const execution_model, |
| const char* const storage_class, |
| const char* const capabilities, |
| const char* const extensions, |
| const char* const data_type) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| if (capabilities) { |
| generator.capabilities_ += capabilities; |
| } |
| if (extensions) { |
| generator.extensions_ += extensions; |
| } |
| |
| generator.before_types_ = "OpDecorate %built_in_var BuiltIn "; |
| generator.before_types_ += built_in; |
| generator.before_types_ += "\n"; |
| if ((0 == std::strcmp(storage_class, "Input")) && |
| (0 == std::strcmp(execution_model, "Fragment"))) { |
| // ensure any needed input types that might require Flat |
| generator.before_types_ += "OpDecorate %built_in_var Flat\n"; |
| } |
| |
| std::ostringstream after_types; |
| if (InitializerRequired(storage_class)) { |
| after_types << "%built_in_null = OpConstantNull " << data_type << "\n"; |
| } |
| after_types << "%built_in_ptr = OpTypePointer " << storage_class << " " |
| << data_type << "\n"; |
| after_types << "%built_in_var = OpVariable %built_in_ptr " << storage_class; |
| if (InitializerRequired(storage_class)) { |
| after_types << " %built_in_null"; |
| } |
| after_types << "\n"; |
| generator.after_types_ = after_types.str(); |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = execution_model; |
| if (strncmp(storage_class, "Input", 5) == 0 || |
| strncmp(storage_class, "Output", 6) == 0) { |
| entry_point.interfaces = "%built_in_var"; |
| } |
| // Any kind of reference would do. |
| entry_point.body = R"( |
| %val = OpBitcast %u32 %built_in_var |
| )"; |
| |
| std::ostringstream execution_modes; |
| if (0 == std::strcmp(execution_model, "Fragment")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OriginUpperLeft\n"; |
| if (0 == std::strcmp(built_in, "FragDepth")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " DepthReplacing\n"; |
| } |
| } |
| if (0 == std::strcmp(execution_model, "Geometry")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " InputPoints\n"; |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OutputPoints\n"; |
| } |
| if (0 == std::strcmp(execution_model, "GLCompute")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " LocalSize 1 1 1\n"; |
| } |
| entry_point.execution_modes = execution_modes.str(); |
| |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_P(ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, Variable) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const vuid = std::get<4>(GetParam()); |
| const TestResult& test_result = std::get<5>(GetParam()); |
| |
| CodeGenerator generator = GetVariableCodeGenerator( |
| built_in, execution_model, storage_class, NULL, NULL, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| TEST_P( |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Variable) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const capabilities = std::get<4>(GetParam()); |
| const char* const extensions = std::get<5>(GetParam()); |
| const char* const vuid = std::get<6>(GetParam()); |
| const TestResult& test_result = std::get<7>(GetParam()); |
| |
| CodeGenerator generator = |
| GetVariableCodeGenerator(built_in, execution_model, storage_class, |
| capabilities, extensions, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), |
| Values("Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Output"), Values("%f32arr2", "%f32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), |
| Values("Fragment", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%f32arr2", "%f32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), |
| Values("Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Private"), Values("%f32arr2", "%f32arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04190 " |
| "VUID-CullDistance-CullDistance-04199"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input or Output storage " |
| "class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceFragmentOutput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Fragment"), |
| Values("Output"), Values("%f32arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04189 " |
| "VUID-CullDistance-CullDistance-04198"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance " |
| "to be used for variables with Output storage class if " |
| "execution model is Fragment.", |
| "which is called with execution model Fragment.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIdVertexInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("VertexId"), Values("Vertex"), Values("Input"), Values("%u32"), |
| Values(nullptr), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow BuiltIn VertexId to be " |
| "used.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceVertexInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Vertex"), |
| Values("Input"), Values("%f32arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04188 " |
| "VUID-CullDistance-CullDistance-04197"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow BuiltIn ClipDistance/CullDistance " |
| "to be used for variables with Input storage class if " |
| "execution model is Vertex.", |
| "which is called with execution model Vertex.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("GLCompute"), |
| Values("Input", "Output"), Values("%f32arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04187 " |
| "VUID-CullDistance-CullDistance-04196"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment, Vertex, TessellationControl, " |
| "TessellationEvaluation or Geometry execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceNotArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Fragment"), |
| Values("Input"), Values("%f32vec2", "%f32vec4", "%f32"), |
| Values("VUID-ClipDistance-ClipDistance-04191 " |
| "VUID-CullDistance-CullDistance-04200"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float array", |
| "is not an array")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceNotFloatArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Fragment"), |
| Values("Input"), Values("%u32arr2", "%u64arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04191 " |
| "VUID-CullDistance-CullDistance-04200"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float array", |
| "components are not float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceNotF32Array, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Fragment"), |
| Values("Input"), Values("%f64arr2", "%f64arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04191 " |
| "VUID-CullDistance-CullDistance-04200"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float array", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32vec4"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("FragCoord"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%f32vec4"), |
| Values("VUID-FragCoord-FragCoord-04210"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordNotInput, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragCoord"), Values("Fragment"), Values("Output"), |
| Values("%f32vec4"), Values("VUID-FragCoord-FragCoord-04211"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32arr4", "%u32vec4"), |
| Values("VUID-FragCoord-FragCoord-04212"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordNotFloatVec4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32vec3"), Values("VUID-FragCoord-FragCoord-04212"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragCoordNotF32Vec4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragCoord"), Values("Fragment"), Values("Input"), |
| Values("%f64vec4"), Values("VUID-FragCoord-FragCoord-04212"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragDepthSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragDepth"), Values("Fragment"), Values("Output"), |
| Values("%f32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragDepthNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("FragDepth"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Output"), Values("%f32"), |
| Values("VUID-FragDepth-FragDepth-04213"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragDepthNotOutput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragDepth"), Values("Fragment"), Values("Input"), |
| Values("%f32"), Values("VUID-FragDepth-FragDepth-04214"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Output storage class", |
| "uses storage class Input")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragDepthNotFloatScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragDepth"), Values("Fragment"), Values("Output"), |
| Values("%f32vec4", "%u32"), |
| Values("VUID-FragDepth-FragDepth-04215"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "is not a float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragDepthNotF32, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FragDepth"), Values("Fragment"), Values("Output"), |
| Values("%f64"), Values("VUID-FragDepth-FragDepth-04215"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FrontFacingAndHelperInvocationSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FrontFacing", "HelperInvocation"), Values("Fragment"), |
| Values("Input"), Values("%bool"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FrontFacingAndHelperInvocationNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("FrontFacing", "HelperInvocation"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%bool"), |
| Values("VUID-FrontFacing-FrontFacing-04229 " |
| "VUID-HelperInvocation-HelperInvocation-04239"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FrontFacingAndHelperInvocationNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FrontFacing", "HelperInvocation"), Values("Fragment"), |
| Values("Output"), Values("%bool"), |
| Values("VUID-FrontFacing-FrontFacing-04230 " |
| "VUID-HelperInvocation-HelperInvocation-04240"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FrontFacingAndHelperInvocationNotBool, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("FrontFacing", "HelperInvocation"), Values("Fragment"), |
| Values("Input"), Values("%f32", "%u32"), |
| Values("VUID-FrontFacing-FrontFacing-04231 " |
| "VUID-HelperInvocation-HelperInvocation-04241"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a bool scalar", |
| "is not a bool scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3Success, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("GLCompute"), Values("Input"), Values("%u32vec3"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3NotGLCompute, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("Vertex", "Fragment", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32vec3"), |
| Values("VUID-GlobalInvocationId-GlobalInvocationId-04236 " |
| "VUID-LocalInvocationId-LocalInvocationId-04281 " |
| "VUID-NumWorkgroups-NumWorkgroups-04296 " |
| "VUID-WorkgroupId-WorkgroupId-04422"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with GLCompute, MeshNV, " |
| "TaskNV, MeshEXT or TaskEXT execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3NotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("GLCompute"), Values("Output"), Values("%u32vec3"), |
| Values("VUID-GlobalInvocationId-GlobalInvocationId-04237 " |
| "VUID-LocalInvocationId-LocalInvocationId-04282 " |
| "VUID-NumWorkgroups-NumWorkgroups-04297 " |
| "VUID-WorkgroupId-WorkgroupId-04423"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3NotIntVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("GLCompute"), Values("Input"), |
| Values("%u32arr3", "%f32vec3"), |
| Values("VUID-GlobalInvocationId-GlobalInvocationId-04238 " |
| "VUID-LocalInvocationId-LocalInvocationId-04283 " |
| "VUID-NumWorkgroups-NumWorkgroups-04298 " |
| "VUID-WorkgroupId-WorkgroupId-04424"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit int vector", |
| "is not an int vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3NotIntVec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("GLCompute"), Values("Input"), Values("%u32vec4"), |
| Values("VUID-GlobalInvocationId-GlobalInvocationId-04238 " |
| "VUID-LocalInvocationId-LocalInvocationId-04283 " |
| "VUID-NumWorkgroups-NumWorkgroups-04298 " |
| "VUID-WorkgroupId-WorkgroupId-04424"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit int vector", |
| "has 4 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ComputeShaderInputInt32Vec3NotInt32Vec, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("GlobalInvocationId", "LocalInvocationId", "NumWorkgroups", |
| "WorkgroupId"), |
| Values("GLCompute"), Values("Input"), Values("%u64vec3"), |
| Values("VUID-GlobalInvocationId-GlobalInvocationId-04238 " |
| "VUID-LocalInvocationId-LocalInvocationId-04283 " |
| "VUID-NumWorkgroups-NumWorkgroups-04298 " |
| "VUID-WorkgroupId-WorkgroupId-04424"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit int vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InvocationIdSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InvocationId"), Values("Geometry", "TessellationControl"), |
| Values("Input"), Values("%u32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InvocationIdInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InvocationId"), |
| Values("Vertex", "Fragment", "GLCompute", "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), |
| Values("VUID-InvocationId-InvocationId-04257"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with TessellationControl or " |
| "Geometry execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InvocationIdNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InvocationId"), Values("Geometry", "TessellationControl"), |
| Values("Output"), Values("%u32"), |
| Values("VUID-InvocationId-InvocationId-04258"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InvocationIdNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InvocationId"), Values("Geometry", "TessellationControl"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("VUID-InvocationId-InvocationId-04259"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InvocationIdNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InvocationId"), Values("Geometry", "TessellationControl"), |
| Values("Input"), Values("%u64"), |
| Values("VUID-InvocationId-InvocationId-04259"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InstanceIndexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InstanceIndex"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InstanceIndexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InstanceIndex"), |
| Values("Geometry", "Fragment", "GLCompute", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), |
| Values("VUID-InstanceIndex-InstanceIndex-04263"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InstanceIndexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InstanceIndex"), Values("Vertex"), Values("Output"), |
| Values("%u32"), Values("VUID-InstanceIndex-InstanceIndex-04264"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InstanceIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InstanceIndex"), Values("Vertex"), Values("Input"), |
| Values("%f32", "%u32vec3"), |
| Values("VUID-InstanceIndex-InstanceIndex-04265"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| InstanceIndexNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("InstanceIndex"), Values("Vertex"), Values("Input"), |
| Values("%u64"), Values("VUID-InstanceIndex-InstanceIndex-04265"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Layer", "ViewportIndex"), Values("Fragment"), |
| Values("Input"), Values("%u32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Layer", "ViewportIndex"), Values("Geometry"), |
| Values("Output"), Values("%u32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("Layer", "ViewportIndex"), |
| Values("TessellationControl", "GLCompute"), Values("Input"), |
| Values("%u32"), |
| Values("VUID-Layer-Layer-04272 VUID-ViewportIndex-ViewportIndex-04404"), |
| Values( |
| TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex, TessellationEvaluation, " |
| "Geometry, or Fragment execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewportIndexExecutionModelEnabledByCapability, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("ViewportIndex"), Values("Vertex", "TessellationEvaluation"), |
| Values("Output"), Values("%u32"), |
| Values("VUID-ViewportIndex-ViewportIndex-04405"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "ShaderViewportIndexLayerEXT or ShaderViewportIndex")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerExecutionModelEnabledByCapability, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Layer"), Values("Vertex", "TessellationEvaluation"), |
| Values("Output"), Values("%u32"), Values("VUID-Layer-Layer-04273"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "ShaderViewportIndexLayerEXT or ShaderLayer")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexFragmentNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("Layer", "ViewportIndex"), Values("Fragment"), Values("Output"), |
| Values("%u32"), |
| Values("VUID-Layer-Layer-04275 VUID-ViewportIndex-ViewportIndex-04407"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Output storage class if execution model is Fragment", |
| "which is called with execution model Fragment")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexGeometryNotOutput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("Layer", "ViewportIndex"), |
| Values("Vertex", "TessellationEvaluation", "Geometry"), Values("Input"), |
| Values("%u32"), |
| Values("VUID-Layer-Layer-04274 VUID-ViewportIndex-ViewportIndex-04406"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Input storage class if execution model is Vertex, " |
| "TessellationEvaluation, Geometry, MeshNV or MeshEXT", |
| "which is called with execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("Layer", "ViewportIndex"), Values("Fragment"), Values("Input"), |
| Values("%f32", "%u32vec3"), |
| Values("VUID-Layer-Layer-04276 VUID-ViewportIndex-ViewportIndex-04408"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerAndViewportIndexNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("Layer", "ViewportIndex"), Values("Fragment"), Values("Input"), |
| Values("%u64"), |
| Values("VUID-Layer-Layer-04276 VUID-ViewportIndex-ViewportIndex-04408"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LayerCapability, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("Layer"), Values("Vertex"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability ShaderLayer\n"), Values(nullptr), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewportIndexCapability, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("ViewportIndex"), |
| Values("Vertex"), Values("Output"), Values("%u32"), |
| Values("OpCapability ShaderViewportIndex\n"), Values(nullptr), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PatchVerticesSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PatchVertices"), |
| Values("TessellationEvaluation", "TessellationControl"), |
| Values("Input"), Values("%u32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PatchVerticesInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PatchVertices"), |
| Values("Vertex", "Fragment", "GLCompute", "Geometry"), |
| Values("Input"), Values("%u32"), |
| Values("VUID-PatchVertices-PatchVertices-04308"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with TessellationControl or " |
| "TessellationEvaluation execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PatchVerticesNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PatchVertices"), |
| Values("TessellationEvaluation", "TessellationControl"), |
| Values("Output"), Values("%u32"), |
| Values("VUID-PatchVertices-PatchVertices-04309"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PatchVerticesNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PatchVertices"), |
| Values("TessellationEvaluation", "TessellationControl"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("VUID-PatchVertices-PatchVertices-04310"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PatchVerticesNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PatchVertices"), |
| Values("TessellationEvaluation", "TessellationControl"), |
| Values("Input"), Values("%u64"), |
| Values("VUID-PatchVertices-PatchVertices-04310"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32vec2"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("PointCoord"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%f32vec2"), |
| Values("VUID-PointCoord-PointCoord-04311"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointCoord"), Values("Fragment"), Values("Output"), |
| Values("%f32vec2"), Values("VUID-PointCoord-PointCoord-04312"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32arr2", "%u32vec2"), |
| Values("VUID-PointCoord-PointCoord-04313"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordNotFloatVec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32vec3"), Values("VUID-PointCoord-PointCoord-04313"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointCoordNotF32Vec4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointCoord"), Values("Fragment"), Values("Input"), |
| Values("%f64vec2"), Values("VUID-PointCoord-PointCoord-04313"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), |
| Values("Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Output"), Values("%f32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), |
| Values("Geometry", "TessellationControl", "TessellationEvaluation"), |
| Values("Input"), Values("%f32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeVertexInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), Values("Vertex"), Values("Input"), |
| Values("%f32"), Values("VUID-PointSize-PointSize-04315"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow BuiltIn PointSize " |
| "to be used for variables with Input storage class if " |
| "execution model is Vertex.", |
| "which is called with execution model Vertex.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), Values("GLCompute", "Fragment"), |
| Values("Input", "Output"), Values("%f32"), |
| Values("VUID-PointSize-PointSize-04314"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex, TessellationControl, " |
| "TessellationEvaluation or Geometry execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeNotFloatScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), Values("Vertex"), Values("Output"), |
| Values("%f32vec4", "%u32"), |
| Values("VUID-PointSize-PointSize-04317"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "is not a float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeNotF32, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PointSize"), Values("Vertex"), Values("Output"), |
| Values("%f64"), Values("VUID-PointSize-PointSize-04317"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), |
| Values("Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Output"), Values("%f32vec4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), |
| Values("Geometry", "TessellationControl", "TessellationEvaluation"), |
| Values("Input"), Values("%f32vec4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), |
| Values("Geometry", "TessellationControl", "TessellationEvaluation"), |
| Values("Private"), Values("%f32vec4"), |
| Values("VUID-Position-Position-04320"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn Position to be only used for " |
| "variables with Input or Output storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionVertexInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), Values("Vertex"), Values("Input"), |
| Values("%f32vec4"), Values("VUID-Position-Position-04319"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow BuiltIn Position " |
| "to be used for variables with Input storage class if " |
| "execution model is Vertex.", |
| "which is called with execution model Vertex.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), Values("GLCompute", "Fragment"), |
| Values("Input", "Output"), Values("%f32vec4"), |
| Values("VUID-Position-Position-04318"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex, TessellationControl, " |
| "TessellationEvaluation or Geometry execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), Values("Geometry"), Values("Input"), |
| Values("%f32arr4", "%u32vec4"), |
| Values("VUID-Position-Position-04321"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionNotFloatVec4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), Values("Geometry"), Values("Input"), |
| Values("%f32vec3"), Values("VUID-Position-Position-04321"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionNotF32Vec4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("Position"), Values("Geometry"), Values("Input"), |
| Values("%f64vec4"), Values("VUID-Position-Position-04321"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PrimitiveId"), |
| Values("Fragment", "TessellationControl", "TessellationEvaluation", |
| "Geometry"), |
| Values("Input"), Values("%u32"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PrimitiveId"), Values("Geometry"), Values("Output"), |
| Values("%u32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("PrimitiveId"), Values("Vertex", "GLCompute"), Values("Input"), |
| Values("%u32"), Values("VUID-PrimitiveId-PrimitiveId-04330"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment, TessellationControl, " |
| "TessellationEvaluation, Geometry, MeshNV, MeshEXT, " |
| "IntersectionKHR, " |
| "AnyHitKHR, and ClosestHitKHR execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdFragmentNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("PrimitiveId"), Values("Fragment"), Values("Output"), |
| Values("%u32"), Values("VUID-PrimitiveId-PrimitiveId-04334"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Output storage class if execution model is Fragment", |
| "which is called with execution model Fragment")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdTessellationNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PrimitiveId"), |
| Values("TessellationControl", "TessellationEvaluation"), |
| Values("Output"), Values("%u32"), |
| Values("VUID-PrimitiveId-PrimitiveId-04334"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Output storage class if execution model is Tessellation", |
| "which is called with execution model Tessellation")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PrimitiveId"), Values("Fragment"), Values("Input"), |
| Values("%f32", "%u32vec3"), |
| Values("VUID-PrimitiveId-PrimitiveId-04337"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("PrimitiveId"), Values("Fragment"), Values("Input"), |
| Values("%u64"), Values("VUID-PrimitiveId-PrimitiveId-04337"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleIdSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleId"), Values("Fragment"), Values("Input"), |
| Values("%u32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleIdInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("SampleId"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), Values("VUID-SampleId-SampleId-04354"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleIdNotInput, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("SampleId"), Values("Fragment"), Values("Output"), |
| Values("%u32"), Values("VUID-SampleId-SampleId-04355"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn SampleId to be only used " |
| "for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleIdNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleId"), Values("Fragment"), Values("Input"), |
| Values("%f32", "%u32vec3"), Values("VUID-SampleId-SampleId-04356"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleIdNotInt32, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleId"), Values("Fragment"), Values("Input"), |
| Values("%u64"), Values("VUID-SampleId-SampleId-04356"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleMask"), Values("Fragment"), Values("Input", "Output"), |
| Values("%u32arr2", "%u32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("SampleMask"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32arr2"), |
| Values("VUID-SampleMask-SampleMask-04357"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskWrongStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleMask"), Values("Fragment"), Values("Workgroup"), |
| Values("%u32arr2"), Values("VUID-SampleMask-SampleMask-04358"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn SampleMask to be only used for " |
| "variables with Input or Output storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskNotArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleMask"), Values("Fragment"), Values("Input"), |
| Values("%f32", "%u32vec3"), |
| Values("VUID-SampleMask-SampleMask-04359"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int array", |
| "is not an array")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskNotIntArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleMask"), Values("Fragment"), Values("Input"), |
| Values("%f32arr2"), Values("VUID-SampleMask-SampleMask-04359"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int array", |
| "components are not int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SampleMaskNotInt32Array, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SampleMask"), Values("Fragment"), Values("Input"), |
| Values("%u64arr2"), Values("VUID-SampleMask-SampleMask-04359"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int array", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SamplePosition"), Values("Fragment"), Values("Input"), |
| Values("%f32vec2"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("SamplePosition"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%f32vec2"), |
| Values("VUID-SamplePosition-SamplePosition-04360"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SamplePosition"), Values("Fragment"), Values("Output"), |
| Values("%f32vec2"), |
| Values("VUID-SamplePosition-SamplePosition-04361"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SamplePosition"), Values("Fragment"), Values("Input"), |
| Values("%f32arr2", "%u32vec4"), |
| Values("VUID-SamplePosition-SamplePosition-04362"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionNotFloatVec2, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SamplePosition"), Values("Fragment"), Values("Input"), |
| Values("%f32vec3"), |
| Values("VUID-SamplePosition-SamplePosition-04362"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SamplePositionNotF32Vec2, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("SamplePosition"), Values("Fragment"), Values("Input"), |
| Values("%f64vec2"), |
| Values("VUID-SamplePosition-SamplePosition-04362"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordSuccess, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessCoord"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32vec3"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("TessCoord"), |
| Values("Vertex", "GLCompute", "Geometry", "TessellationControl", |
| "Fragment"), |
| Values("Input"), Values("%f32vec3"), |
| Values("VUID-TessCoord-TessCoord-04387"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be used only with TessellationEvaluation execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordNotInput, ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessCoord"), Values("Fragment"), Values("Output"), |
| Values("%f32vec3"), Values("VUID-TessCoord-TessCoord-04388"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32arr3", "%u32vec4"), |
| Values("VUID-TessCoord-TessCoord-04389"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordNotFloatVec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessCoord"), Values("Fragment"), Values("Input"), |
| Values("%f32vec2"), Values("VUID-TessCoord-TessCoord-04389"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector", |
| "has 2 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessCoordNotF32Vec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessCoord"), Values("Fragment"), Values("Input"), |
| Values("%f64vec3"), Values("VUID-TessCoord-TessCoord-04389"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterTeseInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterTescOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationControl"), |
| Values("Output"), Values("%f32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), |
| Values("Vertex", "GLCompute", "Geometry", "Fragment"), |
| Values("Input"), Values("%f32arr4"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04390"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with TessellationControl or " |
| "TessellationEvaluation execution models.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterOutputTese, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Output"), Values("%f32arr4"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04392"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used for variables with Output storage class if execution " |
| "model is TessellationEvaluation.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterInputTesc, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationControl"), |
| Values("Input"), Values("%f32arr4"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04391"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used for variables with Input storage class if execution " |
| "model is TessellationControl.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterNotArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32vec4", "%f32"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04393"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float array", |
| "is not an array")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterNotFloatArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%u32arr4"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04393"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float array", |
| "components are not float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterNotFloatArr4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32arr3"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04393"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float array", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelOuterNotF32Arr4, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelOuter"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f64arr4"), |
| Values("VUID-TessLevelOuter-TessLevelOuter-04393"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float array", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerTeseInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32arr2"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerTescOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationControl"), |
| Values("Output"), Values("%f32arr2"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), |
| Values("Vertex", "GLCompute", "Geometry", "Fragment"), |
| Values("Input"), Values("%f32arr2"), |
| Values("VUID-TessLevelInner-TessLevelInner-04394"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with TessellationControl or " |
| "TessellationEvaluation execution models.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerOutputTese, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Output"), Values("%f32arr2"), |
| Values("VUID-TessLevelInner-TessLevelInner-04396"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used for variables with Output storage class if execution " |
| "model is TessellationEvaluation.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerInputTesc, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationControl"), |
| Values("Input"), Values("%f32arr2"), |
| Values("VUID-TessLevelInner-TessLevelInner-04395"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec doesn't allow TessLevelOuter/TessLevelInner to be " |
| "used for variables with Input storage class if execution " |
| "model is TessellationControl.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerNotArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32vec2", "%f32"), |
| Values("VUID-TessLevelInner-TessLevelInner-04397"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float array", |
| "is not an array")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerNotFloatArray, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%u32arr2"), |
| Values("VUID-TessLevelInner-TessLevelInner-04397"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float array", |
| "components are not float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerNotFloatArr2, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f32arr3"), |
| Values("VUID-TessLevelInner-TessLevelInner-04397"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float array", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| TessLevelInnerNotF32Arr2, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("TessLevelInner"), Values("TessellationEvaluation"), |
| Values("Input"), Values("%f64arr2"), |
| Values("VUID-TessLevelInner-TessLevelInner-04397"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 2-component 32-bit float array", |
| "has components with bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIndexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("VertexIndex"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIndexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("VertexIndex"), |
| Values("Fragment", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), |
| Values("VUID-VertexIndex-VertexIndex-04398"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIndexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine( |
| Values("VertexIndex"), Values("Vertex"), Values("Output"), |
| Values("%u32"), Values("VUID-VertexIndex-VertexIndex-04399"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn VertexIndex to be only " |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("VertexIndex"), Values("Vertex"), Values("Input"), |
| Values("%f32", "%u32vec3"), |
| Values("VUID-VertexIndex-VertexIndex-04400"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| VertexIndexNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeResult, |
| Combine(Values("VertexIndex"), Values("Vertex"), Values("Input"), |
| Values("%u64"), Values("VUID-VertexIndex-VertexIndex-04400"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaseInstanceOrVertexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("BaseInstance", "BaseVertex"), Values("Vertex"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaseInstanceOrVertexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("BaseInstance", "BaseVertex"), |
| Values("Fragment", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-BaseInstance-BaseInstance-04181 " |
| "VUID-BaseVertex-BaseVertex-04184"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaseInstanceOrVertexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("BaseInstance", "BaseVertex"), Values("Vertex"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-BaseInstance-BaseInstance-04182 " |
| "VUID-BaseVertex-BaseVertex-04185"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaseInstanceOrVertexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("BaseInstance", "BaseVertex"), Values("Vertex"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-BaseInstance-BaseInstance-04183 " |
| "VUID-BaseVertex-BaseVertex-04186"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DrawIndexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DrawIndex"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DrawIndexMeshSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("DrawIndex"), Values("MeshNV", "TaskNV"), Values("Input"), |
| Values("%u32"), Values("OpCapability MeshShadingNV\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\nOpExtension " |
| "\"SPV_NV_mesh_shader\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DrawIndexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("DrawIndex"), |
| Values("Fragment", "GLCompute", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-DrawIndex-DrawIndex-04207"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be used only with Vertex, MeshNV, TaskNV , MeshEXT or TaskEXT " |
| "execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DrawIndexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DrawIndex"), Values("Vertex"), Values("Output"), |
| Values("%u32"), Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-DrawIndex-DrawIndex-04208"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DrawIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DrawIndex"), Values("Vertex"), Values("Input"), |
| Values("%f32", "%u32vec3"), Values("OpCapability DrawParameters\n"), |
| Values("OpExtension \"SPV_KHR_shader_draw_parameters\"\n"), |
| Values("VUID-DrawIndex-DrawIndex-04209"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewIndexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ViewIndex"), |
| Values("Fragment", "Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation"), |
| Values("Input"), Values("%u32"), Values("OpCapability MultiView\n"), |
| Values("OpExtension \"SPV_KHR_multiview\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewIndexInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ViewIndex"), Values("GLCompute"), Values("Input"), |
| Values("%u32"), Values("OpCapability MultiView\n"), |
| Values("OpExtension \"SPV_KHR_multiview\"\n"), |
| Values("VUID-ViewIndex-ViewIndex-04401"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be not be used with GLCompute execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewIndexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ViewIndex"), Values("Vertex"), Values("Output"), |
| Values("%u32"), Values("OpCapability MultiView\n"), |
| Values("OpExtension \"SPV_KHR_multiview\"\n"), |
| Values("VUID-ViewIndex-ViewIndex-04402"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ViewIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ViewIndex"), Values("Vertex"), Values("Input"), |
| Values("%f32", "%u32vec3"), Values("OpCapability MultiView\n"), |
| Values("OpExtension \"SPV_KHR_multiview\"\n"), |
| Values("VUID-ViewIndex-ViewIndex-04403"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DeviceIndexSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DeviceIndex"), |
| Values("Fragment", "Vertex", "Geometry", "TessellationControl", |
| "TessellationEvaluation", "GLCompute"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability DeviceGroup\n"), |
| Values("OpExtension \"SPV_KHR_device_group\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DeviceIndexNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DeviceIndex"), Values("Fragment", "Vertex", "GLCompute"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability DeviceGroup\n"), |
| Values("OpExtension \"SPV_KHR_device_group\"\n"), |
| Values("VUID-DeviceIndex-DeviceIndex-04205"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| DeviceIndexNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("DeviceIndex"), Values("Fragment", "Vertex", "GLCompute"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability DeviceGroup\n"), |
| Values("OpExtension \"SPV_KHR_device_group\"\n"), |
| Values("VUID-DeviceIndex-DeviceIndex-04206"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // Test HitKind in NV RT shaders |
| INSTANTIATE_TEST_SUITE_P( |
| HitKindNVSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitKindNV"), |
| Values("AnyHitNV", "ClosestHitNV"), Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| // HitKind is valid in AH, CH shaders as input i32 scalar |
| INSTANTIATE_TEST_SUITE_P( |
| HitKindSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitKindKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR"), Values("Input"), |
| Values("%u32"), Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| HitKindNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitKindKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "IntersectionKHR", |
| "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-HitKindKHR-HitKindKHR-04242"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| HitKindNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitKindKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR"), Values("Output"), |
| Values("%u32"), Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-HitKindKHR-HitKindKHR-04243"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| HitKindNotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitKindKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR"), Values("Input"), |
| Values("%f32", "%u32vec3"), Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-HitKindKHR-HitKindKHR-04244"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // Ensure HitT is not supported in KHR RT shaders |
| INSTANTIATE_TEST_SUITE_P( |
| HitTNVNotSupportedInKHR, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitTNV"), |
| Values("AnyHitKHR", "ClosestHitKHR"), Values("Input"), |
| Values("%u32"), Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult( |
| SPV_ERROR_INVALID_CAPABILITY, |
| "of MemberDecorate requires one of these capabilities")))); |
| |
| // HitT is valid in AH, CH shaders as input f32 scalar (NV RT only) |
| INSTANTIATE_TEST_SUITE_P( |
| HitTNVSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitTNV"), |
| Values("AnyHitNV", "ClosestHitNV"), Values("Input"), Values("%f32"), |
| Values("OpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| HitTNVNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitTNV"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationNV", "IntersectionNV", "MissNV", |
| "CallableNV"), |
| Values("Input"), Values("%f32"), |
| Values("OpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_ray_tracing\"\n"), |
| Values("VUID-HitTNV-HitTNV-04245"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| HitTNVNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitTNV"), |
| Values("AnyHitNV", "ClosestHitNV"), Values("Output"), |
| Values("%f32"), Values("OpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_ray_tracing\"\n"), |
| Values("VUID-HitTNV-HitTNV-04246"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| INSTANTIATE_TEST_SUITE_P( |
| HitTNVNotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("HitTNV"), |
| Values("AnyHitNV", "ClosestHitNV"), Values("Input"), |
| Values("%u32", "%f32vec3"), Values("OpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_ray_tracing\"\n"), |
| Values("VUID-HitTNV-HitTNV-04247"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "is not a float scalar")))); |
| |
| // InstanceCustomIndexKHR, InstanceId, PrimitiveId, RayGeometryIndexKHR are |
| // valid in IS, AH, CH shaders as input i32 scalars |
| INSTANTIATE_TEST_SUITE_P( |
| RTBuiltIn3StageI32Success, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("InstanceCustomIndexKHR", "RayGeometryIndexKHR", |
| "InstanceId", "PrimitiveId"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTBuiltIn3StageI32NotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("InstanceCustomIndexKHR", "RayGeometryIndexKHR", |
| "InstanceId"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-InstanceCustomIndexKHR-InstanceCustomIndexKHR-04251 " |
| "VUID-RayGeometryIndexKHR-RayGeometryIndexKHR-04345 " |
| "VUID-InstanceId-InstanceId-04254 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTBuiltIn3StageI32NotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("InstanceCustomIndexKHR", "RayGeometryIndexKHR", |
| "InstanceId"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-InstanceCustomIndexKHR-InstanceCustomIndexKHR-04252 " |
| "VUID-RayGeometryIndexKHR-RayGeometryIndexKHR-04346 " |
| "VUID-InstanceId-InstanceId-04255 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTBuiltIn3StageI32NotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("InstanceCustomIndexKHR", "RayGeometryIndexKHR", |
| "InstanceId"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-InstanceCustomIndexKHR-InstanceCustomIndexKHR-04253 " |
| "VUID-RayGeometryIndexKHR-RayGeometryIndexKHR-04347 " |
| "VUID-InstanceId-InstanceId-04256 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // PrimitiveId needs special negative testing because it has non-RT uses |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdRTNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values(SPV_ENV_VULKAN_1_2), Values("PrimitiveId"), |
| Values("RayGenerationKHR", "MissKHR", "CallableKHR"), Values("Input"), |
| Values("%u32"), Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-PrimitiveId-PrimitiveId-04330"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with Fragment, TessellationControl, " |
| "TessellationEvaluation, Geometry, MeshNV, MeshEXT, " |
| "IntersectionKHR, " |
| "AnyHitKHR, and ClosestHitKHR execution models")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdRTNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("PrimitiveId"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-PrimitiveId-PrimitiveId-04334"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Output storage class if execution model is ")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveIdRTNotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("PrimitiveId"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-PrimitiveId-PrimitiveId-04337"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // ObjectRayDirectionKHR and ObjectRayOriginKHR valid |
| // in IS, AH, CH shaders as input 32-bit float vec3 |
| INSTANTIATE_TEST_SUITE_P( |
| ObjectRayDirectionAndOriginSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectRayDirectionKHR", "ObjectRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ObjectRayDirectionAndOriginNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectRayDirectionKHR", "ObjectRayOriginKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectRayDirectionKHR-ObjectRayDirectionKHR-04299 " |
| "VUID-ObjectRayOriginKHR-ObjectRayOriginKHR-04302 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ObjectRayDirectionAndOriginNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectRayDirectionKHR", "ObjectRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Output"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectRayDirectionKHR-ObjectRayDirectionKHR-04300 " |
| "VUID-ObjectRayOriginKHR-ObjectRayOriginKHR-04303 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ObjectRayDirectionAndOriginNotFloatVec3, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectRayDirectionKHR", "ObjectRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%u32vec3", "%f32", "%f32vec2", "%f32vec4"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectRayDirectionKHR-ObjectRayDirectionKHR-04301 " |
| "VUID-ObjectRayOriginKHR-ObjectRayOriginKHR-04304 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector")))); |
| |
| // ObjectToWorldKHR and WorldToObjectKHR valid |
| // in IS, AH, CH shaders as input mat4x3 |
| INSTANTIATE_TEST_SUITE_P( |
| RTObjectMatrixSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectToWorldKHR", "WorldToObjectKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%f32mat34"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTObjectMatrixNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectToWorldKHR", "WorldToObjectKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%f32mat34"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectToWorldKHR-ObjectToWorldKHR-04305 " |
| "VUID-WorldToObjectKHR-WorldToObjectKHR-04434 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTObjectMatrixNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectToWorldKHR", "WorldToObjectKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Output"), Values("%f32mat34"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectToWorldKHR-ObjectToWorldKHR-04306 " |
| "VUID-WorldToObjectKHR-WorldToObjectKHR-04435 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RTObjectMatrixNotMat4x3, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("ObjectToWorldKHR", "WorldToObjectKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR"), |
| Values("Input"), Values("%f32mat43", "%f32mat44", "%f32vec4"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-ObjectToWorldKHR-ObjectToWorldKHR-04307 " |
| "VUID-WorldToObjectKHR-WorldToObjectKHR-04436 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "variable needs to be a matrix with " |
| "4 columns of 3-component vectors of 32-bit floats")))); |
| |
| // IncomingRayFlagsKHR is valid |
| // in IS, AH, CH, MS shaders as an input i32 scalar |
| INSTANTIATE_TEST_SUITE_P( |
| IncomingRayFlagsSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("IncomingRayFlagsKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| IncomingRayFlagsNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("IncomingRayFlagsKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "CallableKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04248 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04348 " |
| "VUID-RayTminKHR-RayTminKHR-04351 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| IncomingRayFlagsNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("IncomingRayFlagsKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04249 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04349 " |
| "VUID-RayTminKHR-RayTminKHR-04352 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| INSTANTIATE_TEST_SUITE_P( |
| IncomingRayFlagsNotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("IncomingRayFlagsKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04250 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04350 " |
| "VUID-RayTminKHR-RayTminKHR-04353 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // CullMaskKHR is valid |
| // in IS, AH, CH, MS shaders as an input i32 scalar |
| INSTANTIATE_TEST_SUITE_P( |
| CullMaskSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("CullMaskKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\nOpCapability RayCullMaskKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\nOpExtension " |
| "\"SPV_KHR_ray_cull_mask\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| CullMaskNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("CullMaskKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "CallableKHR"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\nOpCapability RayCullMaskKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\nOpExtension " |
| "\"SPV_KHR_ray_cull_mask\"\n"), |
| Values("VUID-CullMaskKHR-CullMaskKHR-06735 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04348 " |
| "VUID-RayTminKHR-RayTminKHR-04351 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ICullMaskNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("CullMaskKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability RayTracingKHR\nOpCapability RayCullMaskKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\nOpExtension " |
| "\"SPV_KHR_ray_cull_mask\"\n"), |
| Values("VUID-CullMaskKHR-CullMaskKHR-06736 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04349 " |
| "VUID-RayTminKHR-RayTminKHR-04352 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| INSTANTIATE_TEST_SUITE_P( |
| CullMaskNotIntScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("CullMaskKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability RayTracingKHR\nOpCapability RayCullMaskKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\nOpExtension " |
| "\"SPV_KHR_ray_cull_mask\"\n"), |
| Values("VUID-CullMaskKHR-CullMaskKHR-06737 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04350 " |
| "VUID-RayTminKHR-RayTminKHR-04353 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| // RayTmaxKHR, RayTminKHR are all valid |
| // in IS, AH, CH, MS shaders as input f32 scalars |
| INSTANTIATE_TEST_SUITE_P( |
| RayTSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("RayTmaxKHR", "RayTminKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%f32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RayTNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("RayTmaxKHR", "RayTminKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "CallableKHR"), |
| Values("Input"), Values("%f32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04248 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04348 " |
| "VUID-RayTminKHR-RayTminKHR-04351 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| RayTNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("RayTmaxKHR", "RayTminKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Output"), Values("%f32"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04249 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04349 " |
| "VUID-RayTminKHR-RayTminKHR-04352 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| INSTANTIATE_TEST_SUITE_P( |
| RayTNotFloatScalar, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("RayTmaxKHR", "RayTminKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%u32", "%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-IncomingRayFlagsKHR-IncomingRayFlagsKHR-04250 " |
| "VUID-RayTmaxKHR-RayTmaxKHR-04350 " |
| "VUID-RayTminKHR-RayTminKHR-04353 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "is not a float scalar")))); |
| |
| // WorldRayDirectionKHR and WorldRayOriginKHR are valid |
| // in IS, AH, CH, MS shaders as input 32-bit float vec3 |
| INSTANTIATE_TEST_SUITE_P( |
| WorldRayDirectionAndOriginSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("WorldRayDirectionKHR", "WorldRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| WorldRayDirectionAndOriginNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("WorldRayDirectionKHR", "WorldRayOriginKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute", "RayGenerationKHR", "CallableKHR"), |
| Values("Input"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-WorldRayDirectionKHR-WorldRayDirectionKHR-04428 " |
| "VUID-WorldRayOriginKHR-WorldRayOriginKHR-04431 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| WorldRayDirectionAndOriginNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), |
| Values("WorldRayDirectionKHR", "WorldRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Output"), Values("%f32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-WorldRayDirectionKHR-WorldRayDirectionKHR-04429 " |
| "VUID-WorldRayOriginKHR-WorldRayOriginKHR-04432 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| WorldRayDirectionAndOriginNotFloatVec3, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values(SPV_ENV_VULKAN_1_2), |
| Values("WorldRayDirectionKHR", "WorldRayOriginKHR"), |
| Values("AnyHitKHR", "ClosestHitKHR", "IntersectionKHR", "MissKHR"), |
| Values("Input"), Values("%u32vec3", "%f32", "%f32vec2", "%f32vec4"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-WorldRayDirectionKHR-WorldRayDirectionKHR-04430 " |
| "VUID-WorldRayOriginKHR-WorldRayOriginKHR-04433 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector")))); |
| |
| // LaunchIdKHR and LaunchSizeKHR are valid |
| // in RG, IS, AH, CH, MS shaders as input 32-bit ivec3 |
| INSTANTIATE_TEST_SUITE_P( |
| LaunchRTSuccess, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("LaunchIdKHR", "LaunchSizeKHR"), |
| Values("RayGenerationKHR", "AnyHitKHR", "ClosestHitKHR", |
| "IntersectionKHR", "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LaunchRTNotExecutionMode, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("LaunchIdKHR", "LaunchSizeKHR"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "Fragment", |
| "GLCompute"), |
| Values("Input"), Values("%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-LaunchIdKHR-LaunchIdKHR-04266 " |
| "VUID-LaunchSizeKHR-LaunchSizeKHR-04269 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec does not allow BuiltIn", |
| "to be used with the execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LaunchRTNotInput, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("LaunchIdKHR", "LaunchSizeKHR"), |
| Values("RayGenerationKHR", "AnyHitKHR", "ClosestHitKHR", |
| "IntersectionKHR", "MissKHR", "CallableKHR"), |
| Values("Output"), Values("%u32vec3"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-LaunchIdKHR-LaunchIdKHR-04267 " |
| "VUID-LaunchSizeKHR-LaunchSizeKHR-04270 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows", |
| "used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| LaunchRTNotIntVec3, |
| ValidateGenericCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values(SPV_ENV_VULKAN_1_2), Values("LaunchIdKHR", "LaunchSizeKHR"), |
| Values("RayGenerationKHR", "AnyHitKHR", "ClosestHitKHR", |
| "IntersectionKHR", "MissKHR", "CallableKHR"), |
| Values("Input"), Values("%f32vec3", "%u32", "%u32vec2", "%u32vec4"), |
| Values("OpCapability RayTracingKHR\n"), |
| Values("OpExtension \"SPV_KHR_ray_tracing\"\n"), |
| Values("VUID-LaunchIdKHR-LaunchIdKHR-04268 " |
| "VUID-LaunchSizeKHR-LaunchSizeKHR-04271 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit int vector")))); |
| |
| CodeGenerator GetArrayedVariableCodeGenerator(const char* const built_in, |
| const char* const execution_model, |
| const char* const storage_class, |
| const char* const data_type) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = "OpDecorate %built_in_var BuiltIn "; |
| generator.before_types_ += built_in; |
| generator.before_types_ += "\n"; |
| |
| std::ostringstream after_types; |
| after_types << "%built_in_array = OpTypeArray " << data_type << " %u32_3\n"; |
| if (InitializerRequired(storage_class)) { |
| after_types << "%built_in_array_null = OpConstantNull %built_in_array\n"; |
| } |
| |
| after_types << "%built_in_ptr = OpTypePointer " << storage_class |
| << " %built_in_array\n"; |
| after_types << "%built_in_var = OpVariable %built_in_ptr " << storage_class; |
| if (InitializerRequired(storage_class)) { |
| after_types << " %built_in_array_null"; |
| } |
| after_types << "\n"; |
| generator.after_types_ = after_types.str(); |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = execution_model; |
| entry_point.interfaces = "%built_in_var"; |
| // Any kind of reference would do. |
| entry_point.body = R"( |
| %val = OpBitcast %u32 %built_in_var |
| )"; |
| |
| std::ostringstream execution_modes; |
| if (0 == std::strcmp(execution_model, "Fragment")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OriginUpperLeft\n"; |
| if (0 == std::strcmp(built_in, "FragDepth")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " DepthReplacing\n"; |
| } |
| } |
| if (0 == std::strcmp(execution_model, "Geometry")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " InputPoints\n"; |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OutputPoints\n"; |
| } |
| if (0 == std::strcmp(execution_model, "GLCompute")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " LocalSize 1 1 1\n"; |
| } |
| entry_point.execution_modes = execution_modes.str(); |
| |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_P(ValidateVulkanCombineBuiltInArrayedVariable, Variable) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const vuid = std::get<4>(GetParam()); |
| const TestResult& test_result = std::get<5>(GetParam()); |
| |
| CodeGenerator generator = GetArrayedVariableCodeGenerator( |
| built_in, execution_model, storage_class, data_type); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeArrayedF32TessControl, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("PointSize"), Values("TessellationControl"), Values("Input"), |
| Values("%f32"), Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeArrayedF64TessControl, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("PointSize"), Values("TessellationControl"), Values("Input"), |
| Values("%f64"), Values("VUID-PointSize-PointSize-04317"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PointSizeArrayedF32Vertex, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("PointSize"), Values("Vertex"), Values("Output"), |
| Values("%f32"), Values("VUID-PointSize-PointSize-04317"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float scalar", |
| "is not a float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P(PositionArrayedF32Vec4TessControl, |
| ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("Position"), |
| Values("TessellationControl"), Values("Input"), |
| Values("%f32vec4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionArrayedF32Vec3TessControl, |
| ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("Position"), Values("TessellationControl"), Values("Input"), |
| Values("%f32vec3"), Values("VUID-Position-Position-04321"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "has 3 components")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PositionArrayedF32Vec4Vertex, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("Position"), Values("Vertex"), Values("Output"), |
| Values("%f32vec4"), Values("VUID-Position-Position-04321"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit float vector", |
| "is not a float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceOutputSuccess, |
| ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("ClipDistance", "CullDistance"), |
| Values("Geometry", "TessellationControl", "TessellationEvaluation"), |
| Values("Output"), Values("%f32arr2", "%f32arr4"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceVertexInput, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("ClipDistance", "CullDistance"), Values("Fragment"), |
| Values("Input"), Values("%f32arr4"), |
| Values("VUID-ClipDistance-ClipDistance-04191 " |
| "VUID-CullDistance-CullDistance-04200"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float array", |
| "components are not float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ClipAndCullDistanceNotArray, ValidateVulkanCombineBuiltInArrayedVariable, |
| Combine(Values("ClipDistance", "CullDistance"), |
| Values("Geometry", "TessellationControl", "TessellationEvaluation"), |
| Values("Input"), Values("%f32vec2", "%f32vec4"), |
| Values("VUID-ClipDistance-ClipDistance-04191 " |
| "VUID-CullDistance-CullDistance-04200"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit float array", |
| "components are not float scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability ShaderSMBuiltinsNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsInputMeshSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("MeshNV", "TaskNV"), Values("Input"), Values("%u32"), |
| Values("OpCapability ShaderSMBuiltinsNV\nOpCapability MeshShadingNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\nOpExtension " |
| "\"SPV_NV_mesh_shader\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsInputRaySuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("RayGenerationNV", "IntersectionNV", "AnyHitNV", "ClosestHitNV", |
| "MissNV", "CallableNV"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability ShaderSMBuiltinsNV\nOpCapability RayTracingNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\nOpExtension " |
| "\"SPV_NV_ray_tracing\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability ShaderSMBuiltinsNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\n"), |
| Values(nullptr), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability ShaderSMBuiltinsNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\n"), |
| Values(nullptr), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SMBuiltinsNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("SMCountNV", "SMIDNV", "WarpsPerSMNV", "WarpIDNV"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%u64"), |
| Values("OpCapability ShaderSMBuiltinsNV\n"), |
| Values("OpExtension \"SPV_NV_shader_sm_builtins\"\n"), |
| Values(nullptr), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ArmCoreBuiltinsInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("CoreIDARM", "CoreCountARM", "CoreMaxIDARM", "WarpIDARM", |
| "WarpMaxIDARM"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability CoreBuiltinsARM\n"), |
| Values("OpExtension \"SPV_ARM_core_builtins\"\n"), Values(nullptr), |
| Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ArmCoreBuiltinsNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("CoreIDARM", "CoreCountARM", "CoreMaxIDARM", "WarpIDARM", |
| "WarpMaxIDARM"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability CoreBuiltinsARM\n"), |
| Values("OpExtension \"SPV_ARM_core_builtins\"\n"), Values(nullptr), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class", |
| "uses storage class Output")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ArmCoreBuiltinsNotIntScalar, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("CoreIDARM", "CoreCountARM", "CoreMaxIDARM", "WarpIDARM", |
| "WarpMaxIDARM"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%f32", "%u32vec3"), |
| Values("OpCapability CoreBuiltinsARM\n"), |
| Values("OpExtension \"SPV_ARM_core_builtins\"\n"), Values(nullptr), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "is not an int scalar")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ArmCoreBuiltinsNotInt32, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("CoreIDARM", "CoreCountARM", "CoreMaxIDARM", "WarpIDARM", |
| "WarpMaxIDARM"), |
| Values("Vertex", "Fragment", "TessellationControl", |
| "TessellationEvaluation", "Geometry", "GLCompute"), |
| Values("Input"), Values("%u64"), |
| Values("OpCapability CoreBuiltinsARM\n"), |
| Values("OpExtension \"SPV_ARM_core_builtins\"\n"), Values(nullptr), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int scalar", |
| "has bit width 64")))); |
| |
| CodeGenerator GetWorkgroupSizeSuccessGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec3 %u32_1 %u32_1 %u32_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u32vec3 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanWorkgroupSizeSuccess) { |
| CodeGenerator generator = GetWorkgroupSizeSuccessGenerator(); |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| } |
| |
| CodeGenerator GetWorkgroupSizeFragmentGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec3 %u32_1 %u32_1 %u32_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Fragment"; |
| entry_point.execution_modes = "OpExecutionMode %main OriginUpperLeft"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u32vec3 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanWorkgroupSizeFragment) { |
| CodeGenerator generator = GetWorkgroupSizeFragmentGenerator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec allows BuiltIn WorkgroupSize to be used " |
| "only with GLCompute, MeshNV, TaskNV, MeshEXT or " |
| "TaskEXT execution model")); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("is referencing ID <2> (OpConstantComposite) which is " |
| "decorated with BuiltIn WorkgroupSize in function <1> " |
| "called with execution model Fragment")); |
| EXPECT_THAT(getDiagnosticString(), |
| AnyVUID("VUID-WorkgroupSize-WorkgroupSize-04425 " |
| "VUID-WorkgroupSize-WorkgroupSize-04427")); |
| } |
| |
| TEST_F(ValidateBuiltIns, WorkgroupSizeNotConstant) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %copy BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec3 %u32_1 %u32_1 %u32_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u32vec3 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("BuiltIns can only target variables, structure " |
| "members or constants")); |
| } |
| |
| CodeGenerator GetWorkgroupSizeNotVectorGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstant %u32 16 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u32 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanWorkgroupSizeNotVector) { |
| CodeGenerator generator = GetWorkgroupSizeNotVectorGenerator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("According to the Vulkan spec BuiltIn WorkgroupSize " |
| "variable needs to be a 3-component 32-bit int vector. " |
| "ID <2> (OpConstant) is not an int vector.")); |
| EXPECT_THAT(getDiagnosticString(), |
| AnyVUID("VUID-WorkgroupSize-WorkgroupSize-04427")); |
| } |
| |
| CodeGenerator GetWorkgroupSizeNotIntVectorGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %f32vec3 %f32_1 %f32_1 %f32_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %f32vec3 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanWorkgroupSizeNotIntVector) { |
| CodeGenerator generator = GetWorkgroupSizeNotIntVectorGenerator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("According to the Vulkan spec BuiltIn WorkgroupSize " |
| "variable needs to be a 3-component 32-bit int vector. " |
| "ID <2> (OpConstantComposite) is not an int vector.")); |
| EXPECT_THAT(getDiagnosticString(), |
| AnyVUID("VUID-WorkgroupSize-WorkgroupSize-04427")); |
| } |
| |
| CodeGenerator GetWorkgroupSizeNotVec3Generator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec2 %u32_1 %u32_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u32vec2 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanWorkgroupSizeNotVec3) { |
| CodeGenerator generator = GetWorkgroupSizeNotVec3Generator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("According to the Vulkan spec BuiltIn WorkgroupSize " |
| "variable needs to be a 3-component 32-bit int vector. " |
| "ID <2> (OpConstantComposite) has 2 components.")); |
| EXPECT_THAT(getDiagnosticString(), |
| AnyVUID("VUID-WorkgroupSize-WorkgroupSize-04427")); |
| } |
| |
| TEST_F(ValidateBuiltIns, WorkgroupSizeNotInt32Vec) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u64vec3 %u64_1 %u64_1 %u64_1 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| %copy = OpCopyObject %u64vec3 %workgroup_size |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("According to the Vulkan spec BuiltIn WorkgroupSize variable " |
| "needs to be a 3-component 32-bit int vector. ID <2> " |
| "(OpConstantComposite) has components with bit width 64.")); |
| EXPECT_THAT(getDiagnosticString(), |
| AnyVUID("VUID-WorkgroupSize-WorkgroupSize-04427")); |
| } |
| |
| TEST_F(ValidateBuiltIns, WorkgroupSizePrivateVar) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec3 %u32_1 %u32_1 %u32_1 |
| %private_ptr_u32vec3 = OpTypePointer Private %u32vec3 |
| %var = OpVariable %private_ptr_u32vec3 Private %workgroup_size |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.body = R"( |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| } |
| |
| TEST_F(ValidateBuiltIns, GeometryPositionInOutSuccess) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %input_type Block |
| OpMemberDecorate %input_type 0 BuiltIn Position |
| OpDecorate %output_type Block |
| OpMemberDecorate %output_type 0 BuiltIn Position |
| )"; |
| |
| generator.after_types_ = R"( |
| %input_type = OpTypeStruct %f32vec4 |
| %arrayed_input_type = OpTypeArray %input_type %u32_3 |
| %input_ptr = OpTypePointer Input %arrayed_input_type |
| %input = OpVariable %input_ptr Input |
| %input_f32vec4_ptr = OpTypePointer Input %f32vec4 |
| %output_type = OpTypeStruct %f32vec4 |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output |
| %output_f32vec4_ptr = OpTypePointer Output %f32vec4 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Geometry"; |
| entry_point.interfaces = "%input %output"; |
| entry_point.body = R"( |
| %input_pos = OpAccessChain %input_f32vec4_ptr %input %u32_0 %u32_0 |
| %output_pos = OpAccessChain %output_f32vec4_ptr %output %u32_0 |
| %pos = OpLoad %f32vec4 %input_pos |
| OpStore %output_pos %pos |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| generator.entry_points_[0].execution_modes = |
| "OpExecutionMode %main InputPoints\nOpExecutionMode %main OutputPoints\n"; |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| } |
| |
| TEST_F(ValidateBuiltIns, WorkgroupIdNotVec3) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %workgroup_size BuiltIn WorkgroupSize |
| OpDecorate %workgroup_id BuiltIn WorkgroupId |
| )"; |
| |
| generator.after_types_ = R"( |
| %workgroup_size = OpConstantComposite %u32vec3 %u32_1 %u32_1 %u32_1 |
| %input_ptr = OpTypePointer Input %u32vec2 |
| %workgroup_id = OpVariable %input_ptr Input |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "GLCompute"; |
| entry_point.interfaces = "%workgroup_id"; |
| entry_point.body = R"( |
| %copy_size = OpCopyObject %u32vec3 %workgroup_size |
| %load_id = OpLoad %u32vec2 %workgroup_id |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("According to the Vulkan spec BuiltIn WorkgroupId " |
| "variable needs to be a 3-component 32-bit int vector. " |
| "ID <2> (OpVariable) has 2 components.")); |
| } |
| |
| TEST_F(ValidateBuiltIns, TwoBuiltInsFirstFails) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %input_type Block |
| OpDecorate %output_type Block |
| OpMemberDecorate %input_type 0 BuiltIn FragCoord |
| OpMemberDecorate %output_type 0 BuiltIn Position |
| )"; |
| |
| generator.after_types_ = R"( |
| %input_type = OpTypeStruct %f32vec4 |
| %input_ptr = OpTypePointer Input %input_type |
| %input = OpVariable %input_ptr Input |
| %input_f32vec4_ptr = OpTypePointer Input %f32vec4 |
| %output_type = OpTypeStruct %f32vec4 |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output |
| %output_f32vec4_ptr = OpTypePointer Output %f32vec4 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Geometry"; |
| entry_point.interfaces = "%input %output"; |
| entry_point.body = R"( |
| %input_pos = OpAccessChain %input_f32vec4_ptr %input %u32_0 |
| %output_pos = OpAccessChain %output_f32vec4_ptr %output %u32_0 |
| %pos = OpLoad %f32vec4 %input_pos |
| OpStore %output_pos %pos |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| generator.entry_points_[0].execution_modes = |
| "OpExecutionMode %main InputPoints\nOpExecutionMode %main OutputPoints\n"; |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec allows BuiltIn FragCoord to be used only " |
| "with Fragment execution model")); |
| } |
| |
| TEST_F(ValidateBuiltIns, TwoBuiltInsSecondFails) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %input_type Block |
| OpDecorate %output_type Block |
| OpMemberDecorate %input_type 0 BuiltIn Position |
| OpMemberDecorate %output_type 0 BuiltIn FragCoord |
| )"; |
| |
| generator.after_types_ = R"( |
| %input_type = OpTypeStruct %f32vec4 |
| %input_ptr = OpTypePointer Input %input_type |
| %input = OpVariable %input_ptr Input |
| %input_f32vec4_ptr = OpTypePointer Input %f32vec4 |
| %output_type = OpTypeStruct %f32vec4 |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output |
| %output_f32vec4_ptr = OpTypePointer Output %f32vec4 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Geometry"; |
| entry_point.interfaces = "%input %output"; |
| entry_point.body = R"( |
| %input_pos = OpAccessChain %input_f32vec4_ptr %input %u32_0 |
| %output_pos = OpAccessChain %output_f32vec4_ptr %output %u32_0 |
| %pos = OpLoad %f32vec4 %input_pos |
| OpStore %output_pos %pos |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| generator.entry_points_[0].execution_modes = |
| "OpExecutionMode %main InputPoints\nOpExecutionMode %main OutputPoints\n"; |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec allows BuiltIn FragCoord to be only used " |
| "for variables with Input storage class")); |
| } |
| |
| TEST_F(ValidateBuiltIns, VertexPositionVariableSuccess) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %position BuiltIn Position |
| )"; |
| |
| generator.after_types_ = R"( |
| %f32vec4_ptr_output = OpTypePointer Output %f32vec4 |
| %position = OpVariable %f32vec4_ptr_output Output |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Vertex"; |
| entry_point.interfaces = "%position"; |
| entry_point.body = R"( |
| OpStore %position %f32vec4_0123 |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| } |
| |
| TEST_F(ValidateBuiltIns, FragmentPositionTwoEntryPoints) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.before_types_ = R"( |
| OpDecorate %output_type Block |
| OpMemberDecorate %output_type 0 BuiltIn Position |
| )"; |
| |
| generator.after_types_ = R"( |
| %output_type = OpTypeStruct %f32vec4 |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output |
| %output_f32vec4_ptr = OpTypePointer Output %f32vec4 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "vmain"; |
| entry_point.execution_model = "Vertex"; |
| entry_point.interfaces = "%output"; |
| entry_point.body = R"( |
| %val1 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| entry_point.name = "fmain"; |
| entry_point.execution_model = "Fragment"; |
| entry_point.interfaces = "%output"; |
| entry_point.execution_modes = "OpExecutionMode %fmain OriginUpperLeft"; |
| entry_point.body = R"( |
| %val2 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| generator.add_at_the_end_ = R"( |
| %foo = OpFunction %void None %func |
| %foo_entry = OpLabel |
| %position = OpAccessChain %output_f32vec4_ptr %output %u32_0 |
| OpStore %position %f32vec4_0123 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec allows BuiltIn Position to be used only " |
| "with Vertex, TessellationControl, " |
| "TessellationEvaluation or Geometry execution models")); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("called with execution model Fragment")); |
| } |
| |
| CodeGenerator GetNoDepthReplacingGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %output_type Block |
| OpMemberDecorate %output_type 0 BuiltIn FragDepth |
| )"; |
| |
| generator.after_types_ = R"( |
| %output_type = OpTypeStruct %f32 |
| %output_null = OpConstantNull %output_type |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output %output_null |
| %output_f32_ptr = OpTypePointer Output %f32 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = "Fragment"; |
| entry_point.interfaces = "%output"; |
| entry_point.execution_modes = "OpExecutionMode %main OriginUpperLeft"; |
| entry_point.body = R"( |
| %val2 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| const std::string function_body = R"( |
| %foo = OpFunction %void None %func |
| %foo_entry = OpLabel |
| %frag_depth = OpAccessChain %output_f32_ptr %output %u32_0 |
| OpStore %frag_depth %f32_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| generator.add_at_the_end_ = function_body; |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, VulkanFragmentFragDepthNoDepthReplacing) { |
| CodeGenerator generator = GetNoDepthReplacingGenerator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec requires DepthReplacing execution mode to " |
| "be declared when using BuiltIn FragDepth")); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("VUID-FragDepth-FragDepth-04216")); |
| } |
| |
| CodeGenerator GetOneMainHasDepthReplacingOtherHasntGenerator() { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| |
| generator.before_types_ = R"( |
| OpDecorate %output_type Block |
| OpMemberDecorate %output_type 0 BuiltIn FragDepth |
| )"; |
| |
| generator.after_types_ = R"( |
| %output_type = OpTypeStruct %f32 |
| %output_null = OpConstantNull %output_type |
| %output_ptr = OpTypePointer Output %output_type |
| %output = OpVariable %output_ptr Output %output_null |
| %output_f32_ptr = OpTypePointer Output %f32 |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main_d_r"; |
| entry_point.execution_model = "Fragment"; |
| entry_point.interfaces = "%output"; |
| entry_point.execution_modes = |
| "OpExecutionMode %main_d_r OriginUpperLeft\n" |
| "OpExecutionMode %main_d_r DepthReplacing"; |
| entry_point.body = R"( |
| %val2 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| entry_point.name = "main_no_d_r"; |
| entry_point.execution_model = "Fragment"; |
| entry_point.interfaces = "%output"; |
| entry_point.execution_modes = "OpExecutionMode %main_no_d_r OriginUpperLeft"; |
| entry_point.body = R"( |
| %val3 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| const std::string function_body = R"( |
| %foo = OpFunction %void None %func |
| %foo_entry = OpLabel |
| %frag_depth = OpAccessChain %output_f32_ptr %output %u32_0 |
| OpStore %frag_depth %f32_1 |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| generator.add_at_the_end_ = function_body; |
| |
| return generator; |
| } |
| |
| TEST_F(ValidateBuiltIns, |
| VulkanFragmentFragDepthOneMainHasDepthReplacingOtherHasnt) { |
| CodeGenerator generator = GetOneMainHasDepthReplacingOtherHasntGenerator(); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("Vulkan spec requires DepthReplacing execution mode to " |
| "be declared when using BuiltIn FragDepth")); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("VUID-FragDepth-FragDepth-04216")); |
| } |
| |
| TEST_F(ValidateBuiltIns, AllowInstanceIdWithIntersectionShader) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.capabilities_ += R"( |
| OpCapability RayTracingNV |
| )"; |
| |
| generator.extensions_ = R"( |
| OpExtension "SPV_NV_ray_tracing" |
| )"; |
| |
| generator.before_types_ = R"( |
| OpDecorate %input_type Block |
| OpMemberDecorate %input_type 0 BuiltIn InstanceId |
| )"; |
| |
| generator.after_types_ = R"( |
| %input_type = OpTypeStruct %u32 |
| %input_ptr = OpTypePointer Input %input_type |
| %input = OpVariable %input_ptr Input |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main_d_r"; |
| entry_point.execution_model = "IntersectionNV"; |
| entry_point.interfaces = "%input"; |
| entry_point.body = R"( |
| %val2 = OpFunctionCall %void %foo |
| )"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| generator.add_at_the_end_ = R"( |
| %foo = OpFunction %void None %func |
| %foo_entry = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_0); |
| EXPECT_THAT(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_0)); |
| } |
| |
| TEST_F(ValidateBuiltIns, ValidBuiltinsForMeshShader) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.capabilities_ += R"( |
| OpCapability MeshShadingNV |
| )"; |
| |
| generator.extensions_ = R"( |
| OpExtension "SPV_NV_mesh_shader" |
| )"; |
| |
| generator.before_types_ = R"( |
| OpDecorate %gl_PrimitiveID BuiltIn PrimitiveId |
| OpDecorate %gl_PrimitiveID PerPrimitiveNV |
| OpDecorate %gl_Layer BuiltIn Layer |
| OpDecorate %gl_Layer PerPrimitiveNV |
| OpDecorate %gl_ViewportIndex BuiltIn ViewportIndex |
| OpDecorate %gl_ViewportIndex PerPrimitiveNV |
| )"; |
| |
| generator.after_types_ = R"( |
| %u32_81 = OpConstant %u32 81 |
| %_arr_int_uint_81 = OpTypeArray %i32 %u32_81 |
| %_ptr_Output__arr_int_uint_81 = OpTypePointer Output %_arr_int_uint_81 |
| %gl_PrimitiveID = OpVariable %_ptr_Output__arr_int_uint_81 Output |
| %gl_Layer = OpVariable %_ptr_Output__arr_int_uint_81 Output |
| %gl_ViewportIndex = OpVariable %_ptr_Output__arr_int_uint_81 Output |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main_d_r"; |
| entry_point.execution_model = "MeshNV"; |
| entry_point.interfaces = "%gl_PrimitiveID %gl_Layer %gl_ViewportIndex"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_1); |
| ASSERT_EQ(SPV_SUCCESS, ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| } |
| |
| TEST_F(ValidateBuiltIns, InvalidBuiltinsForMeshShader) { |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.capabilities_ += R"( |
| OpCapability MeshShadingNV |
| )"; |
| |
| generator.extensions_ = R"( |
| OpExtension "SPV_NV_mesh_shader" |
| )"; |
| |
| generator.before_types_ = R"( |
| OpDecorate %gl_PrimitiveID BuiltIn PrimitiveId |
| OpDecorate %gl_PrimitiveID PerPrimitiveNV |
| OpDecorate %gl_Layer BuiltIn Layer |
| OpDecorate %gl_Layer PerPrimitiveNV |
| OpDecorate %gl_ViewportIndex BuiltIn ViewportIndex |
| OpDecorate %gl_ViewportIndex PerPrimitiveNV |
| )"; |
| |
| generator.after_types_ = R"( |
| %u32_81 = OpConstant %u32 81 |
| %_arr_float_uint_81 = OpTypeArray %f32 %u32_81 |
| %_ptr_Output__arr_float_uint_81 = OpTypePointer Output %_arr_float_uint_81 |
| %gl_PrimitiveID = OpVariable %_ptr_Output__arr_float_uint_81 Output |
| %gl_Layer = OpVariable %_ptr_Output__arr_float_uint_81 Output |
| %gl_ViewportIndex = OpVariable %_ptr_Output__arr_float_uint_81 Output |
| )"; |
| |
| EntryPoint entry_point; |
| entry_point.name = "main_d_r"; |
| entry_point.execution_model = "MeshNV"; |
| entry_point.interfaces = "%gl_PrimitiveID %gl_Layer %gl_ViewportIndex"; |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_1); |
| ASSERT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("needs to be a 32-bit int scalar")); |
| EXPECT_THAT(getDiagnosticString(), HasSubstr("is not an int scalar")); |
| } |
| |
| TEST_P(ValidateVulkanSubgroupBuiltIns, InMain) { |
| const char* const built_in = std::get<0>(GetParam()); |
| const char* const execution_model = std::get<1>(GetParam()); |
| const char* const storage_class = std::get<2>(GetParam()); |
| const char* const data_type = std::get<3>(GetParam()); |
| const char* const vuid = std::get<4>(GetParam()); |
| const TestResult& test_result = std::get<5>(GetParam()); |
| |
| CodeGenerator generator = CodeGenerator::GetDefaultShaderCodeGenerator(); |
| generator.capabilities_ += R"( |
| OpCapability GroupNonUniformBallot |
| )"; |
| |
| generator.before_types_ = "OpDecorate %built_in_var BuiltIn "; |
| generator.before_types_ += built_in; |
| generator.before_types_ += "\n"; |
| |
| std::ostringstream after_types; |
| after_types << "%built_in_ptr = OpTypePointer " << storage_class << " " |
| << data_type << "\n"; |
| after_types << "%built_in_var = OpVariable %built_in_ptr " << storage_class; |
| after_types << "\n"; |
| generator.after_types_ = after_types.str(); |
| |
| EntryPoint entry_point; |
| entry_point.name = "main"; |
| entry_point.execution_model = execution_model; |
| if (strncmp(storage_class, "Input", 5) == 0 || |
| strncmp(storage_class, "Output", 6) == 0) { |
| entry_point.interfaces = "%built_in_var"; |
| } |
| entry_point.body = |
| std::string("%ld = OpLoad ") + data_type + " %built_in_var\n"; |
| |
| std::ostringstream execution_modes; |
| if (0 == std::strcmp(execution_model, "Fragment")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OriginUpperLeft\n"; |
| if (0 == std::strcmp(built_in, "FragDepth")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " DepthReplacing\n"; |
| } |
| } |
| if (0 == std::strcmp(execution_model, "Geometry")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " InputPoints\n"; |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " OutputPoints\n"; |
| } |
| if (0 == std::strcmp(execution_model, "GLCompute")) { |
| execution_modes << "OpExecutionMode %" << entry_point.name |
| << " LocalSize 1 1 1\n"; |
| } |
| entry_point.execution_modes = execution_modes.str(); |
| |
| generator.entry_points_.push_back(std::move(entry_point)); |
| |
| CompileSuccessfully(generator.Build(), SPV_ENV_VULKAN_1_1); |
| ASSERT_EQ(test_result.validation_result, |
| ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| if (test_result.error_str) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str)); |
| } |
| if (test_result.error_str2) { |
| EXPECT_THAT(getDiagnosticString(), HasSubstr(test_result.error_str2)); |
| } |
| if (vuid) { |
| EXPECT_THAT(getDiagnosticString(), AnyVUID(vuid)); |
| } |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupMaskNotVec4, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupEqMask", "SubgroupGeMask", "SubgroupGtMask", |
| "SubgroupLeMask", "SubgroupLtMask"), |
| Values("GLCompute"), Values("Input"), Values("%u32vec3"), |
| Values("VUID-SubgroupEqMask-SubgroupEqMask-04371 " |
| "VUID-SubgroupGeMask-SubgroupGeMask-04373 " |
| "VUID-SubgroupGtMask-SubgroupGtMask-04375 " |
| "VUID-SubgroupLeMask-SubgroupLeMask-04377 " |
| "VUID-SubgroupLtMask-SubgroupLtMask-04379"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit int vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupMaskNotU32, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupEqMask", "SubgroupGeMask", "SubgroupGtMask", |
| "SubgroupLeMask", "SubgroupLtMask"), |
| Values("GLCompute"), Values("Input"), Values("%f32vec4"), |
| Values("VUID-SubgroupEqMask-SubgroupEqMask-04371 " |
| "VUID-SubgroupGeMask-SubgroupGeMask-04373 " |
| "VUID-SubgroupGtMask-SubgroupGtMask-04375 " |
| "VUID-SubgroupLeMask-SubgroupLeMask-04377 " |
| "VUID-SubgroupLtMask-SubgroupLtMask-04379"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 4-component 32-bit int vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupMaskNotInput, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupEqMask", "SubgroupGeMask", "SubgroupGtMask", |
| "SubgroupLeMask", "SubgroupLtMask"), |
| Values("GLCompute"), Values("Output", "Workgroup", "Private"), |
| Values("%u32vec4"), |
| Values("VUID-SubgroupEqMask-SubgroupEqMask-04370 " |
| "VUID-SubgroupGeMask-SubgroupGeMask-04372 " |
| "VUID-SubgroupGtMask-SubgroupGtMask-04374 " |
| "VUID-SubgroupLeMask-SubgroupLeMask-04376 " |
| "VUID-SubgroupLtMask-SubgroupLtMask-04378"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P(SubgroupMaskOk, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupEqMask", "SubgroupGeMask", |
| "SubgroupGtMask", "SubgroupLeMask", |
| "SubgroupLtMask"), |
| Values("GLCompute"), Values("Input"), |
| Values("%u32vec4"), Values(nullptr), |
| Values(TestResult(SPV_SUCCESS, "")))); |
| |
| TEST_F(ValidateBuiltIns, SubgroupMaskMemberDecorate) { |
| const std::string text = R"( |
| OpCapability Shader |
| OpCapability GroupNonUniformBallot |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %foo "foo" |
| OpExecutionMode %foo LocalSize 1 1 1 |
| OpDecorate %struct Block |
| OpMemberDecorate %struct 0 BuiltIn SubgroupEqMask |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %struct = OpTypeStruct %int |
| %void_fn = OpTypeFunction %void |
| %foo = OpFunction %void None %void_fn |
| %entry = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(text, SPV_ENV_VULKAN_1_1); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr( |
| "BuiltIn SubgroupEqMask cannot be used as a member decoration")); |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupInvocationIdAndSizeNotU32, ValidateVulkanSubgroupBuiltIns, |
| Combine( |
| Values("SubgroupLocalInvocationId", "SubgroupSize"), |
| Values("GLCompute"), Values("Input"), Values("%f32"), |
| Values("VUID-SubgroupLocalInvocationId-SubgroupLocalInvocationId-04381 " |
| "VUID-SubgroupSize-SubgroupSize-04383"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupInvocationIdAndSizeNotInput, ValidateVulkanSubgroupBuiltIns, |
| Combine( |
| Values("SubgroupLocalInvocationId", "SubgroupSize"), |
| Values("GLCompute"), Values("Output", "Workgroup", "Private"), |
| Values("%u32"), |
| Values("VUID-SubgroupLocalInvocationId-SubgroupLocalInvocationId-04380 " |
| "VUID-SubgroupSize-SubgroupSize-04382"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupInvocationIdAndSizeOk, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupLocalInvocationId", "SubgroupSize"), |
| Values("GLCompute"), Values("Input"), Values("%u32"), |
| Values(nullptr), Values(TestResult(SPV_SUCCESS, "")))); |
| |
| TEST_F(ValidateBuiltIns, SubgroupSizeMemberDecorate) { |
| const std::string text = R"( |
| OpCapability Shader |
| OpCapability GroupNonUniform |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %foo "foo" |
| OpExecutionMode %foo LocalSize 1 1 1 |
| OpDecorate %struct Block |
| OpMemberDecorate %struct 0 BuiltIn SubgroupSize |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %struct = OpTypeStruct %int |
| %void_fn = OpTypeFunction %void |
| %foo = OpFunction %void None %void_fn |
| %entry = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(text, SPV_ENV_VULKAN_1_1); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("BuiltIn SubgroupSize cannot be used as a member decoration")); |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupNumAndIdNotCompute, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupId", "NumSubgroups"), Values("Vertex"), |
| Values("Input"), Values("%u32"), |
| Values("VUID-SubgroupId-SubgroupId-04367 " |
| "VUID-NumSubgroups-NumSubgroups-04293"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "to be used only with GLCompute, MeshNV, " |
| "TaskNV, MeshEXT or TaskEXT execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupNumAndIdNotU32, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupId", "NumSubgroups"), Values("GLCompute"), |
| Values("Input"), Values("%f32"), |
| Values("VUID-SubgroupId-SubgroupId-04369 " |
| "VUID-NumSubgroups-NumSubgroups-04295"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 32-bit int")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SubgroupNumAndIdNotInput, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupId", "NumSubgroups"), Values("GLCompute"), |
| Values("Output", "Workgroup", "Private"), Values("%u32"), |
| Values("VUID-SubgroupId-SubgroupId-04368 " |
| "VUID-NumSubgroups-NumSubgroups-04294"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "to be only used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P(SubgroupNumAndIdOk, ValidateVulkanSubgroupBuiltIns, |
| Combine(Values("SubgroupId", "NumSubgroups"), |
| Values("GLCompute"), Values("Input"), |
| Values("%u32"), Values(nullptr), |
| Values(TestResult(SPV_SUCCESS, "")))); |
| |
| TEST_F(ValidateBuiltIns, SubgroupIdMemberDecorate) { |
| const std::string text = R"( |
| OpCapability Shader |
| OpCapability GroupNonUniform |
| OpMemoryModel Logical GLSL450 |
| OpEntryPoint GLCompute %foo "foo" |
| OpExecutionMode %foo LocalSize 1 1 1 |
| OpDecorate %struct Block |
| OpMemberDecorate %struct 0 BuiltIn SubgroupId |
| %void = OpTypeVoid |
| %int = OpTypeInt 32 0 |
| %struct = OpTypeStruct %int |
| %void_fn = OpTypeFunction %void |
| %foo = OpFunction %void None %void_fn |
| %entry = OpLabel |
| OpReturn |
| OpFunctionEnd |
| )"; |
| |
| CompileSuccessfully(text, SPV_ENV_VULKAN_1_1); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions(SPV_ENV_VULKAN_1_1)); |
| EXPECT_THAT( |
| getDiagnosticString(), |
| HasSubstr("BuiltIn SubgroupId cannot be used as a member decoration")); |
| } |
| |
| TEST_F(ValidateBuiltIns, TargetIsType) { |
| const std::string text = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| OpDecorate %void BuiltIn Position |
| %void = OpTypeVoid |
| )"; |
| |
| CompileSuccessfully(text); |
| EXPECT_EQ(SPV_ERROR_INVALID_DATA, ValidateInstructions()); |
| EXPECT_THAT(getDiagnosticString(), |
| HasSubstr("BuiltIns can only target variables, structure members " |
| "or constants")); |
| } |
| |
| TEST_F(ValidateBuiltIns, TargetIsVariable) { |
| const std::string text = R"( |
| OpCapability Shader |
| OpCapability Linkage |
| OpMemoryModel Logical GLSL450 |
| OpDecorate %wg_var BuiltIn Position |
| %int = OpTypeInt 32 0 |
| %int_wg_ptr = OpTypePointer Workgroup %int |
| %wg_var = OpVariable %int_wg_ptr Workgroup |
| )"; |
| |
| CompileSuccessfully(text); |
| EXPECT_EQ(SPV_SUCCESS, ValidateInstructions()); |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveShadingRateOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("PrimitiveShadingRateKHR"), Values("Vertex", "Geometry"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveShadingRateMeshOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("PrimitiveShadingRateKHR"), Values("MeshNV"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability FragmentShadingRateKHR\nOpCapability " |
| "MeshShadingNV\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\nOpExtension " |
| "\"SPV_NV_mesh_shader\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveShadingRateInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("PrimitiveShadingRateKHR"), Values("Fragment"), Values("Output"), |
| Values("%u32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-PrimitiveShadingRateKHR-PrimitiveShadingRateKHR-04484 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn PrimitiveShadingRateKHR to be used " |
| "only with Vertex, Geometry, or MeshNV execution models.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveShadingRateInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("PrimitiveShadingRateKHR"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-PrimitiveShadingRateKHR-PrimitiveShadingRateKHR-04485 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn PrimitiveShadingRateKHR to be only " |
| "used for variables with Output storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| PrimitiveShadingRateInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("PrimitiveShadingRateKHR"), Values("Vertex"), Values("Output"), |
| Values("%f32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-PrimitiveShadingRateKHR-PrimitiveShadingRateKHR-04486 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn PrimitiveShadingRateKHR " |
| "variable needs to be a 32-bit int scalar.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ShadingRateInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ShadingRateKHR"), Values("Fragment"), Values("Input"), |
| Values("%u32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ShadingRateInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ShadingRateKHR"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-ShadingRateKHR-ShadingRateKHR-04490 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn ShadingRateKHR to be used " |
| "only with the Fragment execution model.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ShadingRateInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("ShadingRateKHR"), Values("Fragment"), Values("Output"), |
| Values("%u32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-ShadingRateKHR-ShadingRateKHR-04491 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn ShadingRateKHR to be only " |
| "used for variables with Input storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| ShadingRateInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("ShadingRateKHR"), Values("Fragment"), Values("Input"), |
| Values("%f32"), Values("OpCapability FragmentShadingRateKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shading_rate\"\n"), |
| Values("VUID-ShadingRateKHR-ShadingRateKHR-04492 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn ShadingRateKHR " |
| "variable needs to be a 32-bit int scalar.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragInvocationCountInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragInvocationCountEXT"), Values("Fragment"), |
| Values("Input"), Values("%u32"), |
| Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragInvocationCountInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("FragInvocationCountEXT"), Values("Vertex"), Values("Input"), |
| Values("%u32"), Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragInvocationCountEXT-FragInvocationCountEXT-04217"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragInvocationCountEXT " |
| "to be used only with Fragment execution model.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragInvocationCountInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragInvocationCountEXT"), Values("Fragment"), |
| Values("Output"), Values("%u32"), |
| Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragInvocationCountEXT-FragInvocationCountEXT-04218"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragInvocationCountEXT to be only " |
| "used for variables with Input storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragInvocationCountInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragInvocationCountEXT"), Values("Fragment"), |
| Values("Input"), Values("%f32"), |
| Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragInvocationCountEXT-FragInvocationCountEXT-04219"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn FragInvocationCountEXT " |
| "variable needs to be a 32-bit int scalar.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragSizeInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragSizeEXT"), Values("Fragment"), Values("Input"), |
| Values("%u32vec2"), Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragSizeInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragSizeEXT"), Values("Vertex"), Values("Input"), |
| Values("%u32vec2"), Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragSizeEXT-FragSizeEXT-04220"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragSizeEXT to be " |
| "used only with Fragment execution model.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragSizeInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("FragSizeEXT"), Values("Fragment"), Values("Output"), |
| Values("%u32vec2"), Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragSizeEXT-FragSizeEXT-04221"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragSizeEXT to be only " |
| "used for variables with Input storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragSizeInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragSizeEXT"), Values("Fragment"), Values("Input"), |
| Values("%u32vec3"), Values("OpCapability FragmentDensityEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_invocation_density\"\n"), |
| Values("VUID-FragSizeEXT-FragSizeEXT-04222"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn FragSizeEXT variable " |
| "needs to be a 2-component 32-bit int vector.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragStencilRefOutputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragStencilRefEXT"), Values("Fragment"), Values("Output"), |
| Values("%u32", "%u64"), Values("OpCapability StencilExportEXT\n"), |
| Values("OpExtension \"SPV_EXT_shader_stencil_export\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragStencilRefInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragStencilRefEXT"), Values("Vertex"), Values("Output"), |
| Values("%u32", "%u64"), Values("OpCapability StencilExportEXT\n"), |
| Values("OpExtension \"SPV_EXT_shader_stencil_export\"\n"), |
| Values("VUID-FragStencilRefEXT-FragStencilRefEXT-04223"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragStencilRefEXT to " |
| "be used only with Fragment execution model.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragStencilRefInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragStencilRefEXT"), Values("Fragment"), Values("Input"), |
| Values("%u32", "%u64"), Values("OpCapability StencilExportEXT\n"), |
| Values("OpExtension \"SPV_EXT_shader_stencil_export\"\n"), |
| Values("VUID-FragStencilRefEXT-FragStencilRefEXT-04224"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FragStencilRefEXT to be only used " |
| "for variables with Output storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FragStencilRefInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FragStencilRefEXT"), Values("Fragment"), Values("Output"), |
| Values("%f32", "%f64", "%u32vec2"), |
| Values("OpCapability StencilExportEXT\n"), |
| Values("OpExtension \"SPV_EXT_shader_stencil_export\"\n"), |
| Values("VUID-FragStencilRefEXT-FragStencilRefEXT-04225"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn FragStencilRefEXT " |
| "variable needs to be a int scalar.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FullyCoveredEXTInputSuccess, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FullyCoveredEXT"), Values("Fragment"), Values("Input"), |
| Values("%bool"), Values("OpCapability FragmentFullyCoveredEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_fully_covered\"\n"), |
| Values(nullptr), Values(TestResult()))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FullyCoveredEXTInvalidExecutionModel, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FullyCoveredEXT"), Values("Vertex"), Values("Input"), |
| Values("%bool"), Values("OpCapability FragmentFullyCoveredEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_fully_covered\"\n"), |
| Values("VUID-FullyCoveredEXT-FullyCoveredEXT-04232"), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FullyCoveredEXT to " |
| "be used only with Fragment execution model.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FullyCoveredEXTInvalidStorageClass, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FullyCoveredEXT"), Values("Fragment"), Values("Output"), |
| Values("%bool"), Values("OpCapability FragmentFullyCoveredEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_fully_covered\"\n"), |
| Values("VUID-FullyCoveredEXT-FullyCoveredEXT-04233"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "Vulkan spec allows BuiltIn FullyCoveredEXT to be only used " |
| "for variables with Input storage class.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| FullyCoveredEXTInvalidType, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("FullyCoveredEXT"), Values("Fragment"), Values("Input"), |
| Values("%f32"), Values("OpCapability FragmentFullyCoveredEXT\n"), |
| Values("OpExtension \"SPV_EXT_fragment_fully_covered\"\n"), |
| Values("VUID-FullyCoveredEXT-FullyCoveredEXT-04234"), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, |
| "According to the Vulkan spec BuiltIn FullyCoveredEXT variable " |
| "needs to be a bool scalar.")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaryCoordNotFragment, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("BaryCoordKHR", "BaryCoordNoPerspKHR"), Values("Vertex"), |
| Values("Input"), Values("%f32vec3"), |
| Values("OpCapability FragmentBarycentricKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shader_barycentric\"\n"), |
| Values("VUID-BaryCoordKHR-BaryCoordKHR-04154 " |
| "VUID-BaryCoordNoPerspKHR-BaryCoordNoPerspKHR-04160 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, "Vulkan spec allows BuiltIn", |
| "to be used only with Fragment execution model")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaryCoordNotInput, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine(Values("BaryCoordKHR", "BaryCoordNoPerspKHR"), Values("Fragment"), |
| Values("Output"), Values("%f32vec3"), |
| Values("OpCapability FragmentBarycentricKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shader_barycentric\"\n"), |
| Values("VUID-BaryCoordKHR-BaryCoordKHR-04155 " |
| "VUID-BaryCoordNoPerspKHR-BaryCoordNoPerspKHR-04161 "), |
| Values(TestResult( |
| SPV_ERROR_INVALID_DATA, "Vulkan spec allows BuiltIn", |
| "to be only used for variables with Input storage class")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaryCoordNotFloatVector, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("BaryCoordKHR", "BaryCoordNoPerspKHR"), Values("Fragment"), |
| Values("Output"), Values("%f32arr3", "%u32vec4"), |
| Values("OpCapability FragmentBarycentricKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shader_barycentric\"\n"), |
| Values("VUID-BaryCoordKHR-BaryCoordKHR-04156 " |
| "VUID-BaryCoordNoPerspKHR-BaryCoordNoPerspKHR-04162 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaryCoordNotFloatVec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("BaryCoordKHR", "BaryCoordNoPerspKHR"), Values("Fragment"), |
| Values("Output"), Values("%f32vec2"), |
| Values("OpCapability FragmentBarycentricKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shader_barycentric\"\n"), |
| Values("VUID-BaryCoordKHR-BaryCoordKHR-04156 " |
| "VUID-BaryCoordNoPerspKHR-BaryCoordNoPerspKHR-04162 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector")))); |
| |
| INSTANTIATE_TEST_SUITE_P( |
| BaryCoordNotF32Vec3, |
| ValidateVulkanCombineBuiltInExecutionModelDataTypeCapabilityExtensionResult, |
| Combine( |
| Values("BaryCoordKHR", "BaryCoordNoPerspKHR"), Values("Fragment"), |
| Values("Output"), Values("%f64vec3"), |
| Values("OpCapability FragmentBarycentricKHR\n"), |
| Values("OpExtension \"SPV_KHR_fragment_shader_barycentric\"\n"), |
| Values("VUID-BaryCoordKHR-BaryCoordKHR-04156 " |
| "VUID-BaryCoordNoPerspKHR-BaryCoordNoPerspKHR-04162 "), |
| Values(TestResult(SPV_ERROR_INVALID_DATA, |
| "needs to be a 3-component 32-bit float vector")))); |
| |
| } // namespace |
| } // namespace val |
| } // namespace spvtools |
