third_party/SPIRV-Tools/test/opt/assembly_builder.h - SwiftShader - Git at Google

 // Copyright (c) 2016 Google Inc.
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 #ifndef TEST_OPT_ASSEMBLY_BUILDER_H_
 #define TEST_OPT_ASSEMBLY_BUILDER_H_

 #include <algorithm>
 #include <cstdint>
 #include <sstream>
 #include <string>
 #include <unordered_set>
 #include <vector>

 namespace spvtools {
 namespace opt {

 // A simple SPIR-V assembly code builder for test uses. It builds an SPIR-V
 // assembly module from vectors of assembly strings. It allows users to add
 // instructions to the main function and the type-constants-globals section
 // directly. It relies on OpName instructions and friendly-name disassembling
 // to keep the ID names unchanged after assembling.
 //
 // An assembly module is divided into several sections, matching with the
 // SPIR-V Logical Layout:
 //  Global Preamble:
 //    OpCapability instructions;
 //    OpExtension instructions and OpExtInstImport instructions;
 //    OpMemoryModel instruction;
 //    OpEntryPoint and OpExecutionMode instruction;
 //    OpString, OpSourceExtension, OpSource and OpSourceContinued instructions.
 //  Names:
 //    OpName instructions.
 //  Annotations:
 //    OpDecorate, OpMemberDecorate, OpGroupDecorate, OpGroupMemberDecorate and
 //    OpDecorationGroup.
 //  Types, Constants and Global variables:
 //    Types, constants and global variables declaration instructions.
 //  Main Function:
 //    Main function instructions.
 //  Main Function Postamble:
 //    The return and function end instructions.
 //
 // The assembly code is built by concatenating all the strings in the above
 // sections.
 //
 // Users define the contents in section <Type, Constants and Global Variables>
 // and <Main Function>. The <Names> section is to hold the names for IDs to
 // keep them unchanged before and after assembling. All defined IDs to be added
 // to this code builder will be assigned with a global name through OpName
 // instruction. The name is extracted from the definition instruction.
 //  E.g. adding instruction: %var_a = OpConstant %int 2, will also add an
 //  instruction: OpName %var_a, "var_a".
 //
 // Note that the name must not be used on more than one defined IDs and
 // friendly-name disassembling must be enabled so that OpName instructions will
 // be respected.
 class AssemblyBuilder {
   // The base ID value for spec constants.
   static const uint32_t SPEC_ID_BASE = 200;

  public:
   // Initialize a minimal SPIR-V assembly code as the template. The minimal
   // module contains an empty main function and some predefined names for the
   // main function.
   AssemblyBuilder()
       : spec_id_counter_(SPEC_ID_BASE),
         global_preamble_({
             // clang-format off
                   "OpCapability Shader",
                   "OpCapability Float64",
              "%1 = OpExtInstImport \"GLSL.std.450\"",
                   "OpMemoryModel Logical GLSL450",
                   "OpEntryPoint Vertex %main \"main\"",
             // clang-format on
         }),
         names_(),
         annotations_(),
         types_consts_globals_(),
         main_func_(),
         main_func_postamble_({
             "OpReturn",
             "OpFunctionEnd",
         }) {
     AppendTypesConstantsGlobals({
         "%void = OpTypeVoid",
         "%main_func_type = OpTypeFunction %void",
     });
     AppendInMain({
         "%main = OpFunction %void None %main_func_type",
         "%main_func_entry_block = OpLabel",
     });
   }

   // Appends OpName instructions to this builder. Instruction strings that do
   // not start with 'OpName ' will be skipped. Returns the references of this
   // assembly builder.
   AssemblyBuilder& AppendNames(const std::vector<std::string>& vec_asm_code) {
     for (auto& inst_str : vec_asm_code) {
       if (inst_str.find("OpName ") == 0) {
         names_.push_back(inst_str);
       }
     }
     return *this;
   }

   // Appends instructions to the types-constants-globals section and returns
   // the reference of this assembly builder. IDs defined in the given code will
   // be added to the Names section and then be registered with OpName
   // instruction. Corresponding decoration instruction will be added for spec
   // constants defined with opcode: 'OpSpecConstant'.
   AssemblyBuilder& AppendTypesConstantsGlobals(
       const std::vector<std::string>& vec_asm_code) {
     AddNamesForResultIDsIn(vec_asm_code);
     // Check spec constants defined with OpSpecConstant.
     for (auto& inst_str : vec_asm_code) {
       if (inst_str.find("= OpSpecConstant ") != std::string::npos ||
           inst_str.find("= OpSpecConstantTrue ") != std::string::npos ||
           inst_str.find("= OpSpecConstantFalse ") != std::string::npos) {
         AddSpecIDFor(GetResultIDName(inst_str));
       }
     }
     types_consts_globals_.insert(types_consts_globals_.end(),
                                  vec_asm_code.begin(), vec_asm_code.end());
     return *this;
   }

   // Appends instructions to the main function block, which is already labelled
   // with "main_func_entry_block". Returns the reference of this assembly
   // builder. IDs defined in the given code will be added to the Names section
   // and then be registered with OpName instruction.
   AssemblyBuilder& AppendInMain(const std::vector<std::string>& vec_asm_code) {
     AddNamesForResultIDsIn(vec_asm_code);
     main_func_.insert(main_func_.end(), vec_asm_code.begin(),
                       vec_asm_code.end());
     return *this;
   }

   // Appends annotation instructions to the annotation section, and returns the
   // reference of this assembly builder.
   AssemblyBuilder& AppendAnnotations(
       const std::vector<std::string>& vec_annotations) {
     annotations_.insert(annotations_.end(), vec_annotations.begin(),
                         vec_annotations.end());
     return *this;
   }

   // Pre-pends string to the preamble of the module. Useful for EFFCEE checks.
   AssemblyBuilder& PrependPreamble(const std::vector<std::string>& preamble) {
     preamble_.insert(preamble_.end(), preamble.begin(), preamble.end());
     return *this;
   }

   // Get the SPIR-V assembly code as string.
   std::string GetCode() const {
     std::ostringstream ss;
     for (const auto& line : preamble_) {
       ss << line << std::endl;
     }
     for (const auto& line : global_preamble_) {
       ss << line << std::endl;
     }
     for (const auto& line : names_) {
       ss << line << std::endl;
     }
     for (const auto& line : annotations_) {
       ss << line << std::endl;
     }
     for (const auto& line : types_consts_globals_) {
       ss << line << std::endl;
     }
     for (const auto& line : main_func_) {
       ss << line << std::endl;
     }
     for (const auto& line : main_func_postamble_) {
       ss << line << std::endl;
     }
     return ss.str();
   }

  private:
   // Adds a given name to the Name section with OpName. If the given name has
   // been added before, does nothing.
   void AddOpNameIfNotExist(const std::string& id_name) {
     if (!used_names_.count(id_name)) {
       std::stringstream opname_inst;
       opname_inst << "OpName "
                   << "%" << id_name << " \"" << id_name << "\"";
       names_.emplace_back(opname_inst.str());
       used_names_.insert(id_name);
     }
   }

   // Adds the names in a vector of assembly code strings to the Names section.
   // If a '=' sign is found in an instruction, this instruction will be treated
   // as an ID defining instruction. The ID name used in the instruction will be
   // extracted and added to the Names section.
   void AddNamesForResultIDsIn(const std::vector<std::string>& vec_asm_code) {
     for (const auto& line : vec_asm_code) {
       std::string name = GetResultIDName(line);
       if (!name.empty()) {
         AddOpNameIfNotExist(name);
       }
     }
   }

   // Adds an OpDecorate SpecId instruction for the given ID name.
   void AddSpecIDFor(const std::string& id_name) {
     std::stringstream decorate_inst;
     decorate_inst << "OpDecorate "
                   << "%" << id_name << " SpecId " << spec_id_counter_;
     spec_id_counter_ += 1;
     annotations_.emplace_back(decorate_inst.str());
   }

   // Extracts the ID name from a SPIR-V assembly instruction string. If the
   // instruction is an ID-defining instruction (has result ID), returns the
   // name of the result ID in string. If the instruction does not have result
   // ID, returns an empty string.
   std::string GetResultIDName(const std::string inst_str) {
     std::string name;
     if (inst_str.find('=') != std::string::npos) {
       size_t assign_sign = inst_str.find('=');
       name = inst_str.substr(0, assign_sign);
       name.erase(remove_if(name.begin(), name.end(),
                            [](char c) { return c == ' ' || c == '%'; }),
                  name.end());
     }
     return name;
   }

   uint32_t spec_id_counter_;
   // User-defined preamble.
   std::vector<std::string> preamble_;
   // The vector that contains common preambles shared across all test SPIR-V
   // code.
   std::vector<std::string> global_preamble_;
   // The vector that contains OpName instructions.
   std::vector<std::string> names_;
   // The vector that contains annotation instructions.
   std::vector<std::string> annotations_;
   // The vector that contains the code to declare types, constants and global
   // variables (aka. the Types-Constants-Globals section).
   std::vector<std::string> types_consts_globals_;
   // The vector that contains the code in main function's entry block.
   std::vector<std::string> main_func_;
   // The vector that contains the postamble of main function body.
   std::vector<std::string> main_func_postamble_;
   // All of the defined variable names.
   std::unordered_set<std::string> used_names_;
 };

 }  // namespace opt
 }  // namespace spvtools

 #endif  // TEST_OPT_ASSEMBLY_BUILDER_H_
	// Copyright (c) 2016 Google Inc.
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	#ifndef TEST_OPT_ASSEMBLY_BUILDER_H_
	#define TEST_OPT_ASSEMBLY_BUILDER_H_

	#include <algorithm>
	#include <cstdint>
	#include <sstream>
	#include <string>
	#include <unordered_set>
	#include <vector>

	namespace spvtools {
	namespace opt {

	// A simple SPIR-V assembly code builder for test uses. It builds an SPIR-V
	// assembly module from vectors of assembly strings. It allows users to add
	// instructions to the main function and the type-constants-globals section
	// directly. It relies on OpName instructions and friendly-name disassembling
	// to keep the ID names unchanged after assembling.
	//
	// An assembly module is divided into several sections, matching with the
	// SPIR-V Logical Layout:
	// Global Preamble:
	// OpCapability instructions;
	// OpExtension instructions and OpExtInstImport instructions;
	// OpMemoryModel instruction;
	// OpEntryPoint and OpExecutionMode instruction;
	// OpString, OpSourceExtension, OpSource and OpSourceContinued instructions.
	// Names:
	// OpName instructions.
	// Annotations:
	// OpDecorate, OpMemberDecorate, OpGroupDecorate, OpGroupMemberDecorate and
	// OpDecorationGroup.
	// Types, Constants and Global variables:
	// Types, constants and global variables declaration instructions.
	// Main Function:
	// Main function instructions.
	// Main Function Postamble:
	// The return and function end instructions.
	//
	// The assembly code is built by concatenating all the strings in the above
	// sections.
	//
	// Users define the contents in section <Type, Constants and Global Variables>
	// and <Main Function>. The <Names> section is to hold the names for IDs to
	// keep them unchanged before and after assembling. All defined IDs to be added
	// to this code builder will be assigned with a global name through OpName
	// instruction. The name is extracted from the definition instruction.
	// E.g. adding instruction: %var_a = OpConstant %int 2, will also add an
	// instruction: OpName %var_a, "var_a".
	//
	// Note that the name must not be used on more than one defined IDs and
	// friendly-name disassembling must be enabled so that OpName instructions will
	// be respected.
	class AssemblyBuilder {
	// The base ID value for spec constants.
	static const uint32_t SPEC_ID_BASE = 200;

	public:
	// Initialize a minimal SPIR-V assembly code as the template. The minimal
	// module contains an empty main function and some predefined names for the
	// main function.
	AssemblyBuilder()
	: spec_id_counter_(SPEC_ID_BASE),
	global_preamble_({
	// clang-format off
	"OpCapability Shader",
	"OpCapability Float64",
	"%1 = OpExtInstImport \"GLSL.std.450\"",
	"OpMemoryModel Logical GLSL450",
	"OpEntryPoint Vertex %main \"main\"",
	// clang-format on
	}),
	names_(),
	annotations_(),
	types_consts_globals_(),
	main_func_(),
	main_func_postamble_({
	"OpReturn",
	"OpFunctionEnd",
	}) {
	AppendTypesConstantsGlobals({
	"%void = OpTypeVoid",
	"%main_func_type = OpTypeFunction %void",
	});
	AppendInMain({
	"%main = OpFunction %void None %main_func_type",
	"%main_func_entry_block = OpLabel",
	});
	}

	// Appends OpName instructions to this builder. Instruction strings that do
	// not start with 'OpName ' will be skipped. Returns the references of this
	// assembly builder.
	AssemblyBuilder& AppendNames(const std::vector<std::string>& vec_asm_code) {
	for (auto& inst_str : vec_asm_code) {
	if (inst_str.find("OpName ") == 0) {
	names_.push_back(inst_str);
	}
	}
	return *this;
	}

	// Appends instructions to the types-constants-globals section and returns
	// the reference of this assembly builder. IDs defined in the given code will
	// be added to the Names section and then be registered with OpName
	// instruction. Corresponding decoration instruction will be added for spec
	// constants defined with opcode: 'OpSpecConstant'.
	AssemblyBuilder& AppendTypesConstantsGlobals(
	const std::vector<std::string>& vec_asm_code) {
	AddNamesForResultIDsIn(vec_asm_code);
	// Check spec constants defined with OpSpecConstant.
	for (auto& inst_str : vec_asm_code) {
	if (inst_str.find("= OpSpecConstant ") != std::string::npos \|\|
	inst_str.find("= OpSpecConstantTrue ") != std::string::npos \|\|
	inst_str.find("= OpSpecConstantFalse ") != std::string::npos) {
	AddSpecIDFor(GetResultIDName(inst_str));
	}
	}
	types_consts_globals_.insert(types_consts_globals_.end(),
	vec_asm_code.begin(), vec_asm_code.end());
	return *this;
	}

	// Appends instructions to the main function block, which is already labelled
	// with "main_func_entry_block". Returns the reference of this assembly
	// builder. IDs defined in the given code will be added to the Names section
	// and then be registered with OpName instruction.
	AssemblyBuilder& AppendInMain(const std::vector<std::string>& vec_asm_code) {
	AddNamesForResultIDsIn(vec_asm_code);
	main_func_.insert(main_func_.end(), vec_asm_code.begin(),
	vec_asm_code.end());
	return *this;
	}

	// Appends annotation instructions to the annotation section, and returns the
	// reference of this assembly builder.
	AssemblyBuilder& AppendAnnotations(
	const std::vector<std::string>& vec_annotations) {
	annotations_.insert(annotations_.end(), vec_annotations.begin(),
	vec_annotations.end());
	return *this;
	}

	// Pre-pends string to the preamble of the module. Useful for EFFCEE checks.
	AssemblyBuilder& PrependPreamble(const std::vector<std::string>& preamble) {
	preamble_.insert(preamble_.end(), preamble.begin(), preamble.end());
	return *this;
	}

	// Get the SPIR-V assembly code as string.
	std::string GetCode() const {
	std::ostringstream ss;
	for (const auto& line : preamble_) {
	ss << line << std::endl;
	}
	for (const auto& line : global_preamble_) {
	ss << line << std::endl;
	}
	for (const auto& line : names_) {
	ss << line << std::endl;
	}
	for (const auto& line : annotations_) {
	ss << line << std::endl;
	}
	for (const auto& line : types_consts_globals_) {
	ss << line << std::endl;
	}
	for (const auto& line : main_func_) {
	ss << line << std::endl;
	}
	for (const auto& line : main_func_postamble_) {
	ss << line << std::endl;
	}
	return ss.str();
	}

	private:
	// Adds a given name to the Name section with OpName. If the given name has
	// been added before, does nothing.
	void AddOpNameIfNotExist(const std::string& id_name) {
	if (!used_names_.count(id_name)) {
	std::stringstream opname_inst;
	opname_inst << "OpName "
	<< "%" << id_name << " \"" << id_name << "\"";
	names_.emplace_back(opname_inst.str());
	used_names_.insert(id_name);
	}
	}

	// Adds the names in a vector of assembly code strings to the Names section.
	// If a '=' sign is found in an instruction, this instruction will be treated
	// as an ID defining instruction. The ID name used in the instruction will be
	// extracted and added to the Names section.
	void AddNamesForResultIDsIn(const std::vector<std::string>& vec_asm_code) {
	for (const auto& line : vec_asm_code) {
	std::string name = GetResultIDName(line);
	if (!name.empty()) {
	AddOpNameIfNotExist(name);
	}
	}
	}

	// Adds an OpDecorate SpecId instruction for the given ID name.
	void AddSpecIDFor(const std::string& id_name) {
	std::stringstream decorate_inst;
	decorate_inst << "OpDecorate "
	<< "%" << id_name << " SpecId " << spec_id_counter_;
	spec_id_counter_ += 1;
	annotations_.emplace_back(decorate_inst.str());
	}

	// Extracts the ID name from a SPIR-V assembly instruction string. If the
	// instruction is an ID-defining instruction (has result ID), returns the
	// name of the result ID in string. If the instruction does not have result
	// ID, returns an empty string.
	std::string GetResultIDName(const std::string inst_str) {
	std::string name;
	if (inst_str.find('=') != std::string::npos) {
	size_t assign_sign = inst_str.find('=');
	name = inst_str.substr(0, assign_sign);
	name.erase(remove_if(name.begin(), name.end(),
	[](char c) { return c == ' ' \|\| c == '%'; }),
	name.end());
	}
	return name;
	}

	uint32_t spec_id_counter_;
	// User-defined preamble.
	std::vector<std::string> preamble_;
	// The vector that contains common preambles shared across all test SPIR-V
	// code.
	std::vector<std::string> global_preamble_;
	// The vector that contains OpName instructions.
	std::vector<std::string> names_;
	// The vector that contains annotation instructions.
	std::vector<std::string> annotations_;
	// The vector that contains the code to declare types, constants and global
	// variables (aka. the Types-Constants-Globals section).
	std::vector<std::string> types_consts_globals_;
	// The vector that contains the code in main function's entry block.
	std::vector<std::string> main_func_;
	// The vector that contains the postamble of main function body.
	std::vector<std::string> main_func_postamble_;
	// All of the defined variable names.
	std::unordered_set<std::string> used_names_;
	};

	} // namespace opt
	} // namespace spvtools

	#endif // TEST_OPT_ASSEMBLY_BUILDER_H_