| ; Test all condition-code masks that are relevant for CRJ. |
| ; |
| ; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s |
| |
| declare i32 @foo() |
| @g1 = global i16 0 |
| |
| define void @f1(i32 %target) { |
| ; CHECK-LABEL: f1: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crje %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp eq i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| define void @f2(i32 %target) { |
| ; CHECK-LABEL: f2: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crjlh %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp ne i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| define void @f3(i32 %target) { |
| ; CHECK-LABEL: f3: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crjle %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp sle i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| define void @f4(i32 %target) { |
| ; CHECK-LABEL: f4: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crjl %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp slt i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| define void @f5(i32 %target) { |
| ; CHECK-LABEL: f5: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crjh %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp sgt i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| define void @f6(i32 %target) { |
| ; CHECK-LABEL: f6: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: crjhe %r2, {{%r[0-9]+}}, .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %cond = icmp sge i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| ; Check that CRJ is used for checking equality with a zero-extending |
| ; character load. |
| define void @f7(i8 *%targetptr) { |
| ; CHECK-LABEL: f7: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: llc [[REG:%r[0-5]]], |
| ; CHECK: crje %r2, [[REG]], .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %byte = load i8, i8 *%targetptr |
| %target = zext i8 %byte to i32 |
| %cond = icmp eq i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| ; ...and zero-extending i16 loads. |
| define void @f8(i16 *%targetptr) { |
| ; CHECK-LABEL: f8: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: llh [[REG:%r[0-5]]], |
| ; CHECK: crje %r2, [[REG]], .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %half = load i16, i16 *%targetptr |
| %target = zext i16 %half to i32 |
| %cond = icmp eq i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| ; ...unless the address is a global. |
| define void @f9(i16 *%targetptr) { |
| ; CHECK-LABEL: f9: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK: clhrl %r2, g1 |
| ; CHECK: je .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %half = load i16, i16 *@g1 |
| %target = zext i16 %half to i32 |
| %cond = icmp eq i32 %val, %target |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| ; Check that CRJ is used for checking order between two zero-extending |
| ; byte loads, even if the original comparison was unsigned. |
| define void @f10(i8 *%targetptr1) { |
| ; CHECK-LABEL: f10: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK-DAG: llc [[REG1:%r[0-5]]], 0( |
| ; CHECK-DAG: llc [[REG2:%r[0-5]]], 1( |
| ; CHECK: crjl [[REG1]], [[REG2]], .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %targetptr2 = getelementptr i8, i8 *%targetptr1, i64 1 |
| %byte1 = load i8, i8 *%targetptr1 |
| %byte2 = load i8, i8 *%targetptr2 |
| %ext1 = zext i8 %byte1 to i32 |
| %ext2 = zext i8 %byte2 to i32 |
| %cond = icmp ult i32 %ext1, %ext2 |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |
| |
| ; ...likewise halfword loads. |
| define void @f11(i16 *%targetptr1) { |
| ; CHECK-LABEL: f11: |
| ; CHECK: .cfi_def_cfa_offset |
| ; CHECK: .L[[LABEL:.*]]: |
| ; CHECK-DAG: llh [[REG1:%r[0-5]]], 0( |
| ; CHECK-DAG: llh [[REG2:%r[0-5]]], 2( |
| ; CHECK: crjl [[REG1]], [[REG2]], .L[[LABEL]] |
| br label %loop |
| loop: |
| %val = call i32 @foo() |
| %targetptr2 = getelementptr i16, i16 *%targetptr1, i64 1 |
| %half1 = load i16, i16 *%targetptr1 |
| %half2 = load i16, i16 *%targetptr2 |
| %ext1 = zext i16 %half1 to i32 |
| %ext2 = zext i16 %half2 to i32 |
| %cond = icmp ult i32 %ext1, %ext2 |
| br i1 %cond, label %loop, label %exit |
| exit: |
| ret void |
| } |