| //===- SpeculativeExecution.cpp ---------------------------------*- C++ -*-===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This pass hoists instructions to enable speculative execution on | |
| // targets where branches are expensive. This is aimed at GPUs. It | |
| // currently works on simple if-then and if-then-else | |
| // patterns. | |
| // | |
| // Removing branches is not the only motivation for this | |
| // pass. E.g. consider this code and assume that there is no | |
| // addressing mode for multiplying by sizeof(*a): | |
| // | |
| // if (b > 0) | |
| // c = a[i + 1] | |
| // if (d > 0) | |
| // e = a[i + 2] | |
| // | |
| // turns into | |
| // | |
| // p = &a[i + 1]; | |
| // if (b > 0) | |
| // c = *p; | |
| // q = &a[i + 2]; | |
| // if (d > 0) | |
| // e = *q; | |
| // | |
| // which could later be optimized to | |
| // | |
| // r = &a[i]; | |
| // if (b > 0) | |
| // c = r[1]; | |
| // if (d > 0) | |
| // e = r[2]; | |
| // | |
| // Later passes sink back much of the speculated code that did not enable | |
| // further optimization. | |
| // | |
| // This pass is more aggressive than the function SpeculativeyExecuteBB in | |
| // SimplifyCFG. SimplifyCFG will not speculate if no selects are introduced and | |
| // it will speculate at most one instruction. It also will not speculate if | |
| // there is a value defined in the if-block that is only used in the then-block. | |
| // These restrictions make sense since the speculation in SimplifyCFG seems | |
| // aimed at introducing cheap selects, while this pass is intended to do more | |
| // aggressive speculation while counting on later passes to either capitalize on | |
| // that or clean it up. | |
| // | |
| // If the pass was created by calling | |
| // createSpeculativeExecutionIfHasBranchDivergencePass or the | |
| // -spec-exec-only-if-divergent-target option is present, this pass only has an | |
| // effect on targets where TargetTransformInfo::hasBranchDivergence() is true; | |
| // on other targets, it is a nop. | |
| // | |
| // This lets you include this pass unconditionally in the IR pass pipeline, but | |
| // only enable it for relevant targets. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Transforms/Scalar/SpeculativeExecution.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/Analysis/GlobalsModRef.h" | |
| #include "llvm/Analysis/TargetTransformInfo.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/Operator.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| using namespace llvm; | |
| #define DEBUG_TYPE "speculative-execution" | |
| // The risk that speculation will not pay off increases with the | |
| // number of instructions speculated, so we put a limit on that. | |
| static cl::opt<unsigned> SpecExecMaxSpeculationCost( | |
| "spec-exec-max-speculation-cost", cl::init(7), cl::Hidden, | |
| cl::desc("Speculative execution is not applied to basic blocks where " | |
| "the cost of the instructions to speculatively execute " | |
| "exceeds this limit.")); | |
| // Speculating just a few instructions from a larger block tends not | |
| // to be profitable and this limit prevents that. A reason for that is | |
| // that small basic blocks are more likely to be candidates for | |
| // further optimization. | |
| static cl::opt<unsigned> SpecExecMaxNotHoisted( | |
| "spec-exec-max-not-hoisted", cl::init(5), cl::Hidden, | |
| cl::desc("Speculative execution is not applied to basic blocks where the " | |
| "number of instructions that would not be speculatively executed " | |
| "exceeds this limit.")); | |
| static cl::opt<bool> SpecExecOnlyIfDivergentTarget( | |
| "spec-exec-only-if-divergent-target", cl::init(false), cl::Hidden, | |
| cl::desc("Speculative execution is applied only to targets with divergent " | |
| "branches, even if the pass was configured to apply only to all " | |
| "targets.")); | |
| namespace { | |
| class SpeculativeExecutionLegacyPass : public FunctionPass { | |
| public: | |
| static char ID; | |
| explicit SpeculativeExecutionLegacyPass(bool OnlyIfDivergentTarget = false) | |
| : FunctionPass(ID), OnlyIfDivergentTarget(OnlyIfDivergentTarget || | |
| SpecExecOnlyIfDivergentTarget), | |
| Impl(OnlyIfDivergentTarget) {} | |
| void getAnalysisUsage(AnalysisUsage &AU) const override; | |
| bool runOnFunction(Function &F) override; | |
| StringRef getPassName() const override { | |
| if (OnlyIfDivergentTarget) | |
| return "Speculatively execute instructions if target has divergent " | |
| "branches"; | |
| return "Speculatively execute instructions"; | |
| } | |
| private: | |
| // Variable preserved purely for correct name printing. | |
| const bool OnlyIfDivergentTarget; | |
| SpeculativeExecutionPass Impl; | |
| }; | |
| } // namespace | |
| char SpeculativeExecutionLegacyPass::ID = 0; | |
| INITIALIZE_PASS_BEGIN(SpeculativeExecutionLegacyPass, "speculative-execution", | |
| "Speculatively execute instructions", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(TargetTransformInfoWrapperPass) | |
| INITIALIZE_PASS_END(SpeculativeExecutionLegacyPass, "speculative-execution", | |
| "Speculatively execute instructions", false, false) | |
| void SpeculativeExecutionLegacyPass::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.addRequired<TargetTransformInfoWrapperPass>(); | |
| AU.addPreserved<GlobalsAAWrapperPass>(); | |
| AU.setPreservesCFG(); | |
| } | |
| bool SpeculativeExecutionLegacyPass::runOnFunction(Function &F) { | |
| if (skipFunction(F)) | |
| return false; | |
| auto *TTI = &getAnalysis<TargetTransformInfoWrapperPass>().getTTI(F); | |
| return Impl.runImpl(F, TTI); | |
| } | |
| namespace llvm { | |
| bool SpeculativeExecutionPass::runImpl(Function &F, TargetTransformInfo *TTI) { | |
| if (OnlyIfDivergentTarget && !TTI->hasBranchDivergence()) { | |
| LLVM_DEBUG(dbgs() << "Not running SpeculativeExecution because " | |
| "TTI->hasBranchDivergence() is false.\n"); | |
| return false; | |
| } | |
| this->TTI = TTI; | |
| bool Changed = false; | |
| for (auto& B : F) { | |
| Changed |= runOnBasicBlock(B); | |
| } | |
| return Changed; | |
| } | |
| bool SpeculativeExecutionPass::runOnBasicBlock(BasicBlock &B) { | |
| BranchInst *BI = dyn_cast<BranchInst>(B.getTerminator()); | |
| if (BI == nullptr) | |
| return false; | |
| if (BI->getNumSuccessors() != 2) | |
| return false; | |
| BasicBlock &Succ0 = *BI->getSuccessor(0); | |
| BasicBlock &Succ1 = *BI->getSuccessor(1); | |
| if (&B == &Succ0 || &B == &Succ1 || &Succ0 == &Succ1) { | |
| return false; | |
| } | |
| // Hoist from if-then (triangle). | |
| if (Succ0.getSinglePredecessor() != nullptr && | |
| Succ0.getSingleSuccessor() == &Succ1) { | |
| return considerHoistingFromTo(Succ0, B); | |
| } | |
| // Hoist from if-else (triangle). | |
| if (Succ1.getSinglePredecessor() != nullptr && | |
| Succ1.getSingleSuccessor() == &Succ0) { | |
| return considerHoistingFromTo(Succ1, B); | |
| } | |
| // Hoist from if-then-else (diamond), but only if it is equivalent to | |
| // an if-else or if-then due to one of the branches doing nothing. | |
| if (Succ0.getSinglePredecessor() != nullptr && | |
| Succ1.getSinglePredecessor() != nullptr && | |
| Succ1.getSingleSuccessor() != nullptr && | |
| Succ1.getSingleSuccessor() != &B && | |
| Succ1.getSingleSuccessor() == Succ0.getSingleSuccessor()) { | |
| // If a block has only one instruction, then that is a terminator | |
| // instruction so that the block does nothing. This does happen. | |
| if (Succ1.size() == 1) // equivalent to if-then | |
| return considerHoistingFromTo(Succ0, B); | |
| if (Succ0.size() == 1) // equivalent to if-else | |
| return considerHoistingFromTo(Succ1, B); | |
| } | |
| return false; | |
| } | |
| static InstructionCost ComputeSpeculationCost(const Instruction *I, | |
| const TargetTransformInfo &TTI) { | |
| switch (Operator::getOpcode(I)) { | |
| case Instruction::GetElementPtr: | |
| case Instruction::Add: | |
| case Instruction::Mul: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Select: | |
| case Instruction::Shl: | |
| case Instruction::Sub: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::Xor: | |
| case Instruction::ZExt: | |
| case Instruction::SExt: | |
| case Instruction::Call: | |
| case Instruction::BitCast: | |
| case Instruction::PtrToInt: | |
| case Instruction::IntToPtr: | |
| case Instruction::AddrSpaceCast: | |
| case Instruction::FPToUI: | |
| case Instruction::FPToSI: | |
| case Instruction::UIToFP: | |
| case Instruction::SIToFP: | |
| case Instruction::FPExt: | |
| case Instruction::FPTrunc: | |
| case Instruction::FAdd: | |
| case Instruction::FSub: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::FNeg: | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| case Instruction::Trunc: | |
| case Instruction::Freeze: | |
| case Instruction::ExtractElement: | |
| case Instruction::InsertElement: | |
| case Instruction::ShuffleVector: | |
| case Instruction::ExtractValue: | |
| case Instruction::InsertValue: | |
| return TTI.getInstructionCost(I, TargetTransformInfo::TCK_SizeAndLatency); | |
| default: | |
| return InstructionCost::getInvalid(); // Disallow anything not explicitly | |
| // listed. | |
| } | |
| } | |
| bool SpeculativeExecutionPass::considerHoistingFromTo( | |
| BasicBlock &FromBlock, BasicBlock &ToBlock) { | |
| SmallPtrSet<const Instruction *, 8> NotHoisted; | |
| const auto AllPrecedingUsesFromBlockHoisted = [&NotHoisted](const User *U) { | |
| // Debug variable has special operand to check it's not hoisted. | |
| if (const auto *DVI = dyn_cast<DbgVariableIntrinsic>(U)) { | |
| return all_of(DVI->location_ops(), [&NotHoisted](Value *V) { | |
| if (const auto *I = dyn_cast_or_null<Instruction>(V)) { | |
| if (!NotHoisted.contains(I)) | |
| return true; | |
| } | |
| return false; | |
| }); | |
| } | |
| // Usially debug label intrinsic corresponds to label in LLVM IR. In these | |
| // cases we should not move it here. | |
| // TODO: Possible special processing needed to detect it is related to a | |
| // hoisted instruction. | |
| if (isa<DbgLabelInst>(U)) | |
| return false; | |
| for (const Value *V : U->operand_values()) { | |
| if (const Instruction *I = dyn_cast<Instruction>(V)) { | |
| if (NotHoisted.contains(I)) | |
| return false; | |
| } | |
| } | |
| return true; | |
| }; | |
| InstructionCost TotalSpeculationCost = 0; | |
| unsigned NotHoistedInstCount = 0; | |
| for (const auto &I : FromBlock) { | |
| const InstructionCost Cost = ComputeSpeculationCost(&I, *TTI); | |
| if (Cost.isValid() && isSafeToSpeculativelyExecute(&I) && | |
| AllPrecedingUsesFromBlockHoisted(&I)) { | |
| TotalSpeculationCost += Cost; | |
| if (TotalSpeculationCost > SpecExecMaxSpeculationCost) | |
| return false; // too much to hoist | |
| } else { | |
| // Debug info intrinsics should not be counted for threshold. | |
| if (!isa<DbgInfoIntrinsic>(I)) | |
| NotHoistedInstCount++; | |
| if (NotHoistedInstCount > SpecExecMaxNotHoisted) | |
| return false; // too much left behind | |
| NotHoisted.insert(&I); | |
| } | |
| } | |
| for (auto I = FromBlock.begin(); I != FromBlock.end();) { | |
| // We have to increment I before moving Current as moving Current | |
| // changes the list that I is iterating through. | |
| auto Current = I; | |
| ++I; | |
| if (!NotHoisted.count(&*Current)) { | |
| Current->moveBefore(ToBlock.getTerminator()); | |
| } | |
| } | |
| return true; | |
| } | |
| FunctionPass *createSpeculativeExecutionPass() { | |
| return new SpeculativeExecutionLegacyPass(); | |
| } | |
| FunctionPass *createSpeculativeExecutionIfHasBranchDivergencePass() { | |
| return new SpeculativeExecutionLegacyPass(/* OnlyIfDivergentTarget = */ true); | |
| } | |
| SpeculativeExecutionPass::SpeculativeExecutionPass(bool OnlyIfDivergentTarget) | |
| : OnlyIfDivergentTarget(OnlyIfDivergentTarget || | |
| SpecExecOnlyIfDivergentTarget) {} | |
| PreservedAnalyses SpeculativeExecutionPass::run(Function &F, | |
| FunctionAnalysisManager &AM) { | |
| auto *TTI = &AM.getResult<TargetIRAnalysis>(F); | |
| bool Changed = runImpl(F, TTI); | |
| if (!Changed) | |
| return PreservedAnalyses::all(); | |
| PreservedAnalyses PA; | |
| PA.preserveSet<CFGAnalyses>(); | |
| return PA; | |
| } | |
| } // namespace llvm |