| //===- GVN.cpp - Eliminate redundant values and loads ---------------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This pass performs global value numbering to eliminate fully redundant | |
| // instructions. It also performs simple dead load elimination. | |
| // | |
| // Note that this pass does the value numbering itself; it does not use the | |
| // ValueNumbering analysis passes. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Transforms/Scalar/GVN.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/DepthFirstIterator.h" | |
| #include "llvm/ADT/Hashing.h" | |
| #include "llvm/ADT/MapVector.h" | |
| #include "llvm/ADT/PostOrderIterator.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SetVector.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/Analysis/AliasAnalysis.h" | |
| #include "llvm/Analysis/AssumeBundleQueries.h" | |
| #include "llvm/Analysis/AssumptionCache.h" | |
| #include "llvm/Analysis/CFG.h" | |
| #include "llvm/Analysis/DomTreeUpdater.h" | |
| #include "llvm/Analysis/GlobalsModRef.h" | |
| #include "llvm/Analysis/InstructionPrecedenceTracking.h" | |
| #include "llvm/Analysis/InstructionSimplify.h" | |
| #include "llvm/Analysis/LoopInfo.h" | |
| #include "llvm/Analysis/MemoryBuiltins.h" | |
| #include "llvm/Analysis/MemoryDependenceAnalysis.h" | |
| #include "llvm/Analysis/MemorySSA.h" | |
| #include "llvm/Analysis/MemorySSAUpdater.h" | |
| #include "llvm/Analysis/OptimizationRemarkEmitter.h" | |
| #include "llvm/Analysis/PHITransAddr.h" | |
| #include "llvm/Analysis/TargetLibraryInfo.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/IR/Attributes.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/Constant.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/InstrTypes.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/LLVMContext.h" | |
| #include "llvm/IR/Metadata.h" | |
| #include "llvm/IR/Module.h" | |
| #include "llvm/IR/PassManager.h" | |
| #include "llvm/IR/PatternMatch.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/IR/Use.h" | |
| #include "llvm/IR/Value.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include "llvm/Transforms/Utils/AssumeBundleBuilder.h" | |
| #include "llvm/Transforms/Utils/BasicBlockUtils.h" | |
| #include "llvm/Transforms/Utils/Local.h" | |
| #include "llvm/Transforms/Utils/SSAUpdater.h" | |
| #include "llvm/Transforms/Utils/VNCoercion.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <cstdint> | |
| #include <optional> | |
| #include <utility> | |
| using namespace llvm; | |
| using namespace llvm::gvn; | |
| using namespace llvm::VNCoercion; | |
| using namespace PatternMatch; | |
| #define DEBUG_TYPE "gvn" | |
| STATISTIC(NumGVNInstr, "Number of instructions deleted"); | |
| STATISTIC(NumGVNLoad, "Number of loads deleted"); | |
| STATISTIC(NumGVNPRE, "Number of instructions PRE'd"); | |
| STATISTIC(NumGVNBlocks, "Number of blocks merged"); | |
| STATISTIC(NumGVNSimpl, "Number of instructions simplified"); | |
| STATISTIC(NumGVNEqProp, "Number of equalities propagated"); | |
| STATISTIC(NumPRELoad, "Number of loads PRE'd"); | |
| STATISTIC(NumPRELoopLoad, "Number of loop loads PRE'd"); | |
| STATISTIC(IsValueFullyAvailableInBlockNumSpeculationsMax, | |
| "Number of blocks speculated as available in " | |
| "IsValueFullyAvailableInBlock(), max"); | |
| STATISTIC(MaxBBSpeculationCutoffReachedTimes, | |
| "Number of times we we reached gvn-max-block-speculations cut-off " | |
| "preventing further exploration"); | |
| static cl::opt<bool> GVNEnablePRE("enable-pre", cl::init(true), cl::Hidden); | |
| static cl::opt<bool> GVNEnableLoadPRE("enable-load-pre", cl::init(true)); | |
| static cl::opt<bool> GVNEnableLoadInLoopPRE("enable-load-in-loop-pre", | |
| cl::init(true)); | |
| static cl::opt<bool> | |
| GVNEnableSplitBackedgeInLoadPRE("enable-split-backedge-in-load-pre", | |
| cl::init(false)); | |
| static cl::opt<bool> GVNEnableMemDep("enable-gvn-memdep", cl::init(true)); | |
| static cl::opt<uint32_t> MaxNumDeps( | |
| "gvn-max-num-deps", cl::Hidden, cl::init(100), | |
| cl::desc("Max number of dependences to attempt Load PRE (default = 100)")); | |
| // This is based on IsValueFullyAvailableInBlockNumSpeculationsMax stat. | |
| static cl::opt<uint32_t> MaxBBSpeculations( | |
| "gvn-max-block-speculations", cl::Hidden, cl::init(600), | |
| cl::desc("Max number of blocks we're willing to speculate on (and recurse " | |
| "into) when deducing if a value is fully available or not in GVN " | |
| "(default = 600)")); | |
| static cl::opt<uint32_t> MaxNumVisitedInsts( | |
| "gvn-max-num-visited-insts", cl::Hidden, cl::init(100), | |
| cl::desc("Max number of visited instructions when trying to find " | |
| "dominating value of select dependency (default = 100)")); | |
| struct llvm::GVNPass::Expression { | |
| uint32_t opcode; | |
| bool commutative = false; | |
| // The type is not necessarily the result type of the expression, it may be | |
| // any additional type needed to disambiguate the expression. | |
| Type *type = nullptr; | |
| SmallVector<uint32_t, 4> varargs; | |
| Expression(uint32_t o = ~2U) : opcode(o) {} | |
| bool operator==(const Expression &other) const { | |
| if (opcode != other.opcode) | |
| return false; | |
| if (opcode == ~0U || opcode == ~1U) | |
| return true; | |
| if (type != other.type) | |
| return false; | |
| if (varargs != other.varargs) | |
| return false; | |
| return true; | |
| } | |
| friend hash_code hash_value(const Expression &Value) { | |
| return hash_combine( | |
| Value.opcode, Value.type, | |
| hash_combine_range(Value.varargs.begin(), Value.varargs.end())); | |
| } | |
| }; | |
| namespace llvm { | |
| template <> struct DenseMapInfo<GVNPass::Expression> { | |
| static inline GVNPass::Expression getEmptyKey() { return ~0U; } | |
| static inline GVNPass::Expression getTombstoneKey() { return ~1U; } | |
| static unsigned getHashValue(const GVNPass::Expression &e) { | |
| using llvm::hash_value; | |
| return static_cast<unsigned>(hash_value(e)); | |
| } | |
| static bool isEqual(const GVNPass::Expression &LHS, | |
| const GVNPass::Expression &RHS) { | |
| return LHS == RHS; | |
| } | |
| }; | |
| } // end namespace llvm | |
| /// Represents a particular available value that we know how to materialize. | |
| /// Materialization of an AvailableValue never fails. An AvailableValue is | |
| /// implicitly associated with a rematerialization point which is the | |
| /// location of the instruction from which it was formed. | |
| struct llvm::gvn::AvailableValue { | |
| enum class ValType { | |
| SimpleVal, // A simple offsetted value that is accessed. | |
| LoadVal, // A value produced by a load. | |
| MemIntrin, // A memory intrinsic which is loaded from. | |
| UndefVal, // A UndefValue representing a value from dead block (which | |
| // is not yet physically removed from the CFG). | |
| SelectVal, // A pointer select which is loaded from and for which the load | |
| // can be replace by a value select. | |
| }; | |
| /// Val - The value that is live out of the block. | |
| Value *Val; | |
| /// Kind of the live-out value. | |
| ValType Kind; | |
| /// Offset - The byte offset in Val that is interesting for the load query. | |
| unsigned Offset = 0; | |
| /// V1, V2 - The dominating non-clobbered values of SelectVal. | |
| Value *V1 = nullptr, *V2 = nullptr; | |
| static AvailableValue get(Value *V, unsigned Offset = 0) { | |
| AvailableValue Res; | |
| Res.Val = V; | |
| Res.Kind = ValType::SimpleVal; | |
| Res.Offset = Offset; | |
| return Res; | |
| } | |
| static AvailableValue getMI(MemIntrinsic *MI, unsigned Offset = 0) { | |
| AvailableValue Res; | |
| Res.Val = MI; | |
| Res.Kind = ValType::MemIntrin; | |
| Res.Offset = Offset; | |
| return Res; | |
| } | |
| static AvailableValue getLoad(LoadInst *Load, unsigned Offset = 0) { | |
| AvailableValue Res; | |
| Res.Val = Load; | |
| Res.Kind = ValType::LoadVal; | |
| Res.Offset = Offset; | |
| return Res; | |
| } | |
| static AvailableValue getUndef() { | |
| AvailableValue Res; | |
| Res.Val = nullptr; | |
| Res.Kind = ValType::UndefVal; | |
| Res.Offset = 0; | |
| return Res; | |
| } | |
| static AvailableValue getSelect(SelectInst *Sel, Value *V1, Value *V2) { | |
| AvailableValue Res; | |
| Res.Val = Sel; | |
| Res.Kind = ValType::SelectVal; | |
| Res.Offset = 0; | |
| Res.V1 = V1; | |
| Res.V2 = V2; | |
| return Res; | |
| } | |
| bool isSimpleValue() const { return Kind == ValType::SimpleVal; } | |
| bool isCoercedLoadValue() const { return Kind == ValType::LoadVal; } | |
| bool isMemIntrinValue() const { return Kind == ValType::MemIntrin; } | |
| bool isUndefValue() const { return Kind == ValType::UndefVal; } | |
| bool isSelectValue() const { return Kind == ValType::SelectVal; } | |
| Value *getSimpleValue() const { | |
| assert(isSimpleValue() && "Wrong accessor"); | |
| return Val; | |
| } | |
| LoadInst *getCoercedLoadValue() const { | |
| assert(isCoercedLoadValue() && "Wrong accessor"); | |
| return cast<LoadInst>(Val); | |
| } | |
| MemIntrinsic *getMemIntrinValue() const { | |
| assert(isMemIntrinValue() && "Wrong accessor"); | |
| return cast<MemIntrinsic>(Val); | |
| } | |
| SelectInst *getSelectValue() const { | |
| assert(isSelectValue() && "Wrong accessor"); | |
| return cast<SelectInst>(Val); | |
| } | |
| /// Emit code at the specified insertion point to adjust the value defined | |
| /// here to the specified type. This handles various coercion cases. | |
| Value *MaterializeAdjustedValue(LoadInst *Load, Instruction *InsertPt, | |
| GVNPass &gvn) const; | |
| }; | |
| /// Represents an AvailableValue which can be rematerialized at the end of | |
| /// the associated BasicBlock. | |
| struct llvm::gvn::AvailableValueInBlock { | |
| /// BB - The basic block in question. | |
| BasicBlock *BB = nullptr; | |
| /// AV - The actual available value | |
| AvailableValue AV; | |
| static AvailableValueInBlock get(BasicBlock *BB, AvailableValue &&AV) { | |
| AvailableValueInBlock Res; | |
| Res.BB = BB; | |
| Res.AV = std::move(AV); | |
| return Res; | |
| } | |
| static AvailableValueInBlock get(BasicBlock *BB, Value *V, | |
| unsigned Offset = 0) { | |
| return get(BB, AvailableValue::get(V, Offset)); | |
| } | |
| static AvailableValueInBlock getUndef(BasicBlock *BB) { | |
| return get(BB, AvailableValue::getUndef()); | |
| } | |
| static AvailableValueInBlock getSelect(BasicBlock *BB, SelectInst *Sel, | |
| Value *V1, Value *V2) { | |
| return get(BB, AvailableValue::getSelect(Sel, V1, V2)); | |
| } | |
| /// Emit code at the end of this block to adjust the value defined here to | |
| /// the specified type. This handles various coercion cases. | |
| Value *MaterializeAdjustedValue(LoadInst *Load, GVNPass &gvn) const { | |
| return AV.MaterializeAdjustedValue(Load, BB->getTerminator(), gvn); | |
| } | |
| }; | |
| //===----------------------------------------------------------------------===// | |
| // ValueTable Internal Functions | |
| //===----------------------------------------------------------------------===// | |
| GVNPass::Expression GVNPass::ValueTable::createExpr(Instruction *I) { | |
| Expression e; | |
| e.type = I->getType(); | |
| e.opcode = I->getOpcode(); | |
| if (const GCRelocateInst *GCR = dyn_cast<GCRelocateInst>(I)) { | |
| // gc.relocate is 'special' call: its second and third operands are | |
| // not real values, but indices into statepoint's argument list. | |
| // Use the refered to values for purposes of identity. | |
| e.varargs.push_back(lookupOrAdd(GCR->getOperand(0))); | |
| e.varargs.push_back(lookupOrAdd(GCR->getBasePtr())); | |
| e.varargs.push_back(lookupOrAdd(GCR->getDerivedPtr())); | |
| } else { | |
| for (Use &Op : I->operands()) | |
| e.varargs.push_back(lookupOrAdd(Op)); | |
| } | |
| if (I->isCommutative()) { | |
| // Ensure that commutative instructions that only differ by a permutation | |
| // of their operands get the same value number by sorting the operand value | |
| // numbers. Since commutative operands are the 1st two operands it is more | |
| // efficient to sort by hand rather than using, say, std::sort. | |
| assert(I->getNumOperands() >= 2 && "Unsupported commutative instruction!"); | |
| if (e.varargs[0] > e.varargs[1]) | |
| std::swap(e.varargs[0], e.varargs[1]); | |
| e.commutative = true; | |
| } | |
| if (auto *C = dyn_cast<CmpInst>(I)) { | |
| // Sort the operand value numbers so x<y and y>x get the same value number. | |
| CmpInst::Predicate Predicate = C->getPredicate(); | |
| if (e.varargs[0] > e.varargs[1]) { | |
| std::swap(e.varargs[0], e.varargs[1]); | |
| Predicate = CmpInst::getSwappedPredicate(Predicate); | |
| } | |
| e.opcode = (C->getOpcode() << 8) | Predicate; | |
| e.commutative = true; | |
| } else if (auto *E = dyn_cast<InsertValueInst>(I)) { | |
| e.varargs.append(E->idx_begin(), E->idx_end()); | |
| } else if (auto *SVI = dyn_cast<ShuffleVectorInst>(I)) { | |
| ArrayRef<int> ShuffleMask = SVI->getShuffleMask(); | |
| e.varargs.append(ShuffleMask.begin(), ShuffleMask.end()); | |
| } | |
| return e; | |
| } | |
| GVNPass::Expression GVNPass::ValueTable::createCmpExpr( | |
| unsigned Opcode, CmpInst::Predicate Predicate, Value *LHS, Value *RHS) { | |
| assert((Opcode == Instruction::ICmp || Opcode == Instruction::FCmp) && | |
| "Not a comparison!"); | |
| Expression e; | |
| e.type = CmpInst::makeCmpResultType(LHS->getType()); | |
| e.varargs.push_back(lookupOrAdd(LHS)); | |
| e.varargs.push_back(lookupOrAdd(RHS)); | |
| // Sort the operand value numbers so x<y and y>x get the same value number. | |
| if (e.varargs[0] > e.varargs[1]) { | |
| std::swap(e.varargs[0], e.varargs[1]); | |
| Predicate = CmpInst::getSwappedPredicate(Predicate); | |
| } | |
| e.opcode = (Opcode << 8) | Predicate; | |
| e.commutative = true; | |
| return e; | |
| } | |
| GVNPass::Expression | |
| GVNPass::ValueTable::createExtractvalueExpr(ExtractValueInst *EI) { | |
| assert(EI && "Not an ExtractValueInst?"); | |
| Expression e; | |
| e.type = EI->getType(); | |
| e.opcode = 0; | |
| WithOverflowInst *WO = dyn_cast<WithOverflowInst>(EI->getAggregateOperand()); | |
| if (WO != nullptr && EI->getNumIndices() == 1 && *EI->idx_begin() == 0) { | |
| // EI is an extract from one of our with.overflow intrinsics. Synthesize | |
| // a semantically equivalent expression instead of an extract value | |
| // expression. | |
| e.opcode = WO->getBinaryOp(); | |
| e.varargs.push_back(lookupOrAdd(WO->getLHS())); | |
| e.varargs.push_back(lookupOrAdd(WO->getRHS())); | |
| return e; | |
| } | |
| // Not a recognised intrinsic. Fall back to producing an extract value | |
| // expression. | |
| e.opcode = EI->getOpcode(); | |
| for (Use &Op : EI->operands()) | |
| e.varargs.push_back(lookupOrAdd(Op)); | |
| append_range(e.varargs, EI->indices()); | |
| return e; | |
| } | |
| GVNPass::Expression GVNPass::ValueTable::createGEPExpr(GetElementPtrInst *GEP) { | |
| Expression E; | |
| Type *PtrTy = GEP->getType()->getScalarType(); | |
| const DataLayout &DL = GEP->getModule()->getDataLayout(); | |
| unsigned BitWidth = DL.getIndexTypeSizeInBits(PtrTy); | |
| MapVector<Value *, APInt> VariableOffsets; | |
| APInt ConstantOffset(BitWidth, 0); | |
| if (PtrTy->isOpaquePointerTy() && | |
| GEP->collectOffset(DL, BitWidth, VariableOffsets, ConstantOffset)) { | |
| // For opaque pointers, convert into offset representation, to recognize | |
| // equivalent address calculations that use different type encoding. | |
| LLVMContext &Context = GEP->getContext(); | |
| E.opcode = GEP->getOpcode(); | |
| E.type = nullptr; | |
| E.varargs.push_back(lookupOrAdd(GEP->getPointerOperand())); | |
| for (const auto &Pair : VariableOffsets) { | |
| E.varargs.push_back(lookupOrAdd(Pair.first)); | |
| E.varargs.push_back(lookupOrAdd(ConstantInt::get(Context, Pair.second))); | |
| } | |
| if (!ConstantOffset.isZero()) | |
| E.varargs.push_back( | |
| lookupOrAdd(ConstantInt::get(Context, ConstantOffset))); | |
| } else { | |
| // If converting to offset representation fails (for typed pointers and | |
| // scalable vectors), fall back to type-based implementation: | |
| E.opcode = GEP->getOpcode(); | |
| E.type = GEP->getSourceElementType(); | |
| for (Use &Op : GEP->operands()) | |
| E.varargs.push_back(lookupOrAdd(Op)); | |
| } | |
| return E; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // ValueTable External Functions | |
| //===----------------------------------------------------------------------===// | |
| GVNPass::ValueTable::ValueTable() = default; | |
| GVNPass::ValueTable::ValueTable(const ValueTable &) = default; | |
| GVNPass::ValueTable::ValueTable(ValueTable &&) = default; | |
| GVNPass::ValueTable::~ValueTable() = default; | |
| GVNPass::ValueTable & | |
| GVNPass::ValueTable::operator=(const GVNPass::ValueTable &Arg) = default; | |
| /// add - Insert a value into the table with a specified value number. | |
| void GVNPass::ValueTable::add(Value *V, uint32_t num) { | |
| valueNumbering.insert(std::make_pair(V, num)); | |
| if (PHINode *PN = dyn_cast<PHINode>(V)) | |
| NumberingPhi[num] = PN; | |
| } | |
| uint32_t GVNPass::ValueTable::lookupOrAddCall(CallInst *C) { | |
| if (AA->doesNotAccessMemory(C) && | |
| // FIXME: Currently the calls which may access the thread id may | |
| // be considered as not accessing the memory. But this is | |
| // problematic for coroutines, since coroutines may resume in a | |
| // different thread. So we disable the optimization here for the | |
| // correctness. However, it may block many other correct | |
| // optimizations. Revert this one when we detect the memory | |
| // accessing kind more precisely. | |
| !C->getFunction()->isPresplitCoroutine()) { | |
| Expression exp = createExpr(C); | |
| uint32_t e = assignExpNewValueNum(exp).first; | |
| valueNumbering[C] = e; | |
| return e; | |
| } else if (MD && AA->onlyReadsMemory(C) && | |
| // FIXME: Currently the calls which may access the thread id may | |
| // be considered as not accessing the memory. But this is | |
| // problematic for coroutines, since coroutines may resume in a | |
| // different thread. So we disable the optimization here for the | |
| // correctness. However, it may block many other correct | |
| // optimizations. Revert this one when we detect the memory | |
| // accessing kind more precisely. | |
| !C->getFunction()->isPresplitCoroutine()) { | |
| Expression exp = createExpr(C); | |
| auto ValNum = assignExpNewValueNum(exp); | |
| if (ValNum.second) { | |
| valueNumbering[C] = ValNum.first; | |
| return ValNum.first; | |
| } | |
| MemDepResult local_dep = MD->getDependency(C); | |
| if (!local_dep.isDef() && !local_dep.isNonLocal()) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| if (local_dep.isDef()) { | |
| // For masked load/store intrinsics, the local_dep may actually be | |
| // a normal load or store instruction. | |
| CallInst *local_cdep = dyn_cast<CallInst>(local_dep.getInst()); | |
| if (!local_cdep || local_cdep->arg_size() != C->arg_size()) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| for (unsigned i = 0, e = C->arg_size(); i < e; ++i) { | |
| uint32_t c_vn = lookupOrAdd(C->getArgOperand(i)); | |
| uint32_t cd_vn = lookupOrAdd(local_cdep->getArgOperand(i)); | |
| if (c_vn != cd_vn) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| } | |
| uint32_t v = lookupOrAdd(local_cdep); | |
| valueNumbering[C] = v; | |
| return v; | |
| } | |
| // Non-local case. | |
| const MemoryDependenceResults::NonLocalDepInfo &deps = | |
| MD->getNonLocalCallDependency(C); | |
| // FIXME: Move the checking logic to MemDep! | |
| CallInst* cdep = nullptr; | |
| // Check to see if we have a single dominating call instruction that is | |
| // identical to C. | |
| for (const NonLocalDepEntry &I : deps) { | |
| if (I.getResult().isNonLocal()) | |
| continue; | |
| // We don't handle non-definitions. If we already have a call, reject | |
| // instruction dependencies. | |
| if (!I.getResult().isDef() || cdep != nullptr) { | |
| cdep = nullptr; | |
| break; | |
| } | |
| CallInst *NonLocalDepCall = dyn_cast<CallInst>(I.getResult().getInst()); | |
| // FIXME: All duplicated with non-local case. | |
| if (NonLocalDepCall && DT->properlyDominates(I.getBB(), C->getParent())) { | |
| cdep = NonLocalDepCall; | |
| continue; | |
| } | |
| cdep = nullptr; | |
| break; | |
| } | |
| if (!cdep) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| if (cdep->arg_size() != C->arg_size()) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| for (unsigned i = 0, e = C->arg_size(); i < e; ++i) { | |
| uint32_t c_vn = lookupOrAdd(C->getArgOperand(i)); | |
| uint32_t cd_vn = lookupOrAdd(cdep->getArgOperand(i)); | |
| if (c_vn != cd_vn) { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| } | |
| uint32_t v = lookupOrAdd(cdep); | |
| valueNumbering[C] = v; | |
| return v; | |
| } else { | |
| valueNumbering[C] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| } | |
| /// Returns true if a value number exists for the specified value. | |
| bool GVNPass::ValueTable::exists(Value *V) const { | |
| return valueNumbering.count(V) != 0; | |
| } | |
| /// lookup_or_add - Returns the value number for the specified value, assigning | |
| /// it a new number if it did not have one before. | |
| uint32_t GVNPass::ValueTable::lookupOrAdd(Value *V) { | |
| DenseMap<Value*, uint32_t>::iterator VI = valueNumbering.find(V); | |
| if (VI != valueNumbering.end()) | |
| return VI->second; | |
| auto *I = dyn_cast<Instruction>(V); | |
| if (!I) { | |
| valueNumbering[V] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| Expression exp; | |
| switch (I->getOpcode()) { | |
| case Instruction::Call: | |
| return lookupOrAddCall(cast<CallInst>(I)); | |
| case Instruction::FNeg: | |
| case Instruction::Add: | |
| case Instruction::FAdd: | |
| case Instruction::Sub: | |
| case Instruction::FSub: | |
| case Instruction::Mul: | |
| case Instruction::FMul: | |
| case Instruction::UDiv: | |
| case Instruction::SDiv: | |
| case Instruction::FDiv: | |
| case Instruction::URem: | |
| case Instruction::SRem: | |
| case Instruction::FRem: | |
| case Instruction::Shl: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Xor: | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| case Instruction::Trunc: | |
| case Instruction::ZExt: | |
| case Instruction::SExt: | |
| case Instruction::FPToUI: | |
| case Instruction::FPToSI: | |
| case Instruction::UIToFP: | |
| case Instruction::SIToFP: | |
| case Instruction::FPTrunc: | |
| case Instruction::FPExt: | |
| case Instruction::PtrToInt: | |
| case Instruction::IntToPtr: | |
| case Instruction::AddrSpaceCast: | |
| case Instruction::BitCast: | |
| case Instruction::Select: | |
| case Instruction::Freeze: | |
| case Instruction::ExtractElement: | |
| case Instruction::InsertElement: | |
| case Instruction::ShuffleVector: | |
| case Instruction::InsertValue: | |
| exp = createExpr(I); | |
| break; | |
| case Instruction::GetElementPtr: | |
| exp = createGEPExpr(cast<GetElementPtrInst>(I)); | |
| break; | |
| case Instruction::ExtractValue: | |
| exp = createExtractvalueExpr(cast<ExtractValueInst>(I)); | |
| break; | |
| case Instruction::PHI: | |
| valueNumbering[V] = nextValueNumber; | |
| NumberingPhi[nextValueNumber] = cast<PHINode>(V); | |
| return nextValueNumber++; | |
| default: | |
| valueNumbering[V] = nextValueNumber; | |
| return nextValueNumber++; | |
| } | |
| uint32_t e = assignExpNewValueNum(exp).first; | |
| valueNumbering[V] = e; | |
| return e; | |
| } | |
| /// Returns the value number of the specified value. Fails if | |
| /// the value has not yet been numbered. | |
| uint32_t GVNPass::ValueTable::lookup(Value *V, bool Verify) const { | |
| DenseMap<Value*, uint32_t>::const_iterator VI = valueNumbering.find(V); | |
| if (Verify) { | |
| assert(VI != valueNumbering.end() && "Value not numbered?"); | |
| return VI->second; | |
| } | |
| return (VI != valueNumbering.end()) ? VI->second : 0; | |
| } | |
| /// Returns the value number of the given comparison, | |
| /// assigning it a new number if it did not have one before. Useful when | |
| /// we deduced the result of a comparison, but don't immediately have an | |
| /// instruction realizing that comparison to hand. | |
| uint32_t GVNPass::ValueTable::lookupOrAddCmp(unsigned Opcode, | |
| CmpInst::Predicate Predicate, | |
| Value *LHS, Value *RHS) { | |
| Expression exp = createCmpExpr(Opcode, Predicate, LHS, RHS); | |
| return assignExpNewValueNum(exp).first; | |
| } | |
| /// Remove all entries from the ValueTable. | |
| void GVNPass::ValueTable::clear() { | |
| valueNumbering.clear(); | |
| expressionNumbering.clear(); | |
| NumberingPhi.clear(); | |
| PhiTranslateTable.clear(); | |
| nextValueNumber = 1; | |
| Expressions.clear(); | |
| ExprIdx.clear(); | |
| nextExprNumber = 0; | |
| } | |
| /// Remove a value from the value numbering. | |
| void GVNPass::ValueTable::erase(Value *V) { | |
| uint32_t Num = valueNumbering.lookup(V); | |
| valueNumbering.erase(V); | |
| // If V is PHINode, V <--> value number is an one-to-one mapping. | |
| if (isa<PHINode>(V)) | |
| NumberingPhi.erase(Num); | |
| } | |
| /// verifyRemoved - Verify that the value is removed from all internal data | |
| /// structures. | |
| void GVNPass::ValueTable::verifyRemoved(const Value *V) const { | |
| for (DenseMap<Value*, uint32_t>::const_iterator | |
| I = valueNumbering.begin(), E = valueNumbering.end(); I != E; ++I) { | |
| assert(I->first != V && "Inst still occurs in value numbering map!"); | |
| } | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // GVN Pass | |
| //===----------------------------------------------------------------------===// | |
| bool GVNPass::isPREEnabled() const { | |
| return Options.AllowPRE.value_or(GVNEnablePRE); | |
| } | |
| bool GVNPass::isLoadPREEnabled() const { | |
| return Options.AllowLoadPRE.value_or(GVNEnableLoadPRE); | |
| } | |
| bool GVNPass::isLoadInLoopPREEnabled() const { | |
| return Options.AllowLoadInLoopPRE.value_or(GVNEnableLoadInLoopPRE); | |
| } | |
| bool GVNPass::isLoadPRESplitBackedgeEnabled() const { | |
| return Options.AllowLoadPRESplitBackedge.value_or( | |
| GVNEnableSplitBackedgeInLoadPRE); | |
| } | |
| bool GVNPass::isMemDepEnabled() const { | |
| return Options.AllowMemDep.value_or(GVNEnableMemDep); | |
| } | |
| PreservedAnalyses GVNPass::run(Function &F, FunctionAnalysisManager &AM) { | |
| // FIXME: The order of evaluation of these 'getResult' calls is very | |
| // significant! Re-ordering these variables will cause GVN when run alone to | |
| // be less effective! We should fix memdep and basic-aa to not exhibit this | |
| // behavior, but until then don't change the order here. | |
| auto &AC = AM.getResult<AssumptionAnalysis>(F); | |
| auto &DT = AM.getResult<DominatorTreeAnalysis>(F); | |
| auto &TLI = AM.getResult<TargetLibraryAnalysis>(F); | |
| auto &AA = AM.getResult<AAManager>(F); | |
| auto *MemDep = | |
| isMemDepEnabled() ? &AM.getResult<MemoryDependenceAnalysis>(F) : nullptr; | |
| auto *LI = AM.getCachedResult<LoopAnalysis>(F); | |
| auto *MSSA = AM.getCachedResult<MemorySSAAnalysis>(F); | |
| auto &ORE = AM.getResult<OptimizationRemarkEmitterAnalysis>(F); | |
| bool Changed = runImpl(F, AC, DT, TLI, AA, MemDep, LI, &ORE, | |
| MSSA ? &MSSA->getMSSA() : nullptr); | |
| if (!Changed) | |
| return PreservedAnalyses::all(); | |
| PreservedAnalyses PA; | |
| PA.preserve<DominatorTreeAnalysis>(); | |
| PA.preserve<TargetLibraryAnalysis>(); | |
| if (MSSA) | |
| PA.preserve<MemorySSAAnalysis>(); | |
| if (LI) | |
| PA.preserve<LoopAnalysis>(); | |
| return PA; | |
| } | |
| void GVNPass::printPipeline( | |
| raw_ostream &OS, function_ref<StringRef(StringRef)> MapClassName2PassName) { | |
| static_cast<PassInfoMixin<GVNPass> *>(this)->printPipeline( | |
| OS, MapClassName2PassName); | |
| OS << "<"; | |
| if (Options.AllowPRE != std::nullopt) | |
| OS << (*Options.AllowPRE ? "" : "no-") << "pre;"; | |
| if (Options.AllowLoadPRE != std::nullopt) | |
| OS << (*Options.AllowLoadPRE ? "" : "no-") << "load-pre;"; | |
| if (Options.AllowLoadPRESplitBackedge != std::nullopt) | |
| OS << (*Options.AllowLoadPRESplitBackedge ? "" : "no-") | |
| << "split-backedge-load-pre;"; | |
| if (Options.AllowMemDep != std::nullopt) | |
| OS << (*Options.AllowMemDep ? "" : "no-") << "memdep"; | |
| OS << ">"; | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| LLVM_DUMP_METHOD void GVNPass::dump(DenseMap<uint32_t, Value *> &d) const { | |
| errs() << "{\n"; | |
| for (auto &I : d) { | |
| errs() << I.first << "\n"; | |
| I.second->dump(); | |
| } | |
| errs() << "}\n"; | |
| } | |
| #endif | |
| enum class AvailabilityState : char { | |
| /// We know the block *is not* fully available. This is a fixpoint. | |
| Unavailable = 0, | |
| /// We know the block *is* fully available. This is a fixpoint. | |
| Available = 1, | |
| /// We do not know whether the block is fully available or not, | |
| /// but we are currently speculating that it will be. | |
| /// If it would have turned out that the block was, in fact, not fully | |
| /// available, this would have been cleaned up into an Unavailable. | |
| SpeculativelyAvailable = 2, | |
| }; | |
| /// Return true if we can prove that the value | |
| /// we're analyzing is fully available in the specified block. As we go, keep | |
| /// track of which blocks we know are fully alive in FullyAvailableBlocks. This | |
| /// map is actually a tri-state map with the following values: | |
| /// 0) we know the block *is not* fully available. | |
| /// 1) we know the block *is* fully available. | |
| /// 2) we do not know whether the block is fully available or not, but we are | |
| /// currently speculating that it will be. | |
| static bool IsValueFullyAvailableInBlock( | |
| BasicBlock *BB, | |
| DenseMap<BasicBlock *, AvailabilityState> &FullyAvailableBlocks) { | |
| SmallVector<BasicBlock *, 32> Worklist; | |
| std::optional<BasicBlock *> UnavailableBB; | |
| // The number of times we didn't find an entry for a block in a map and | |
| // optimistically inserted an entry marking block as speculatively available. | |
| unsigned NumNewNewSpeculativelyAvailableBBs = 0; | |
| #ifndef NDEBUG | |
| SmallSet<BasicBlock *, 32> NewSpeculativelyAvailableBBs; | |
| SmallVector<BasicBlock *, 32> AvailableBBs; | |
| #endif | |
| Worklist.emplace_back(BB); | |
| while (!Worklist.empty()) { | |
| BasicBlock *CurrBB = Worklist.pop_back_val(); // LoadFO - depth-first! | |
| // Optimistically assume that the block is Speculatively Available and check | |
| // to see if we already know about this block in one lookup. | |
| std::pair<DenseMap<BasicBlock *, AvailabilityState>::iterator, bool> IV = | |
| FullyAvailableBlocks.try_emplace( | |
| CurrBB, AvailabilityState::SpeculativelyAvailable); | |
| AvailabilityState &State = IV.first->second; | |
| // Did the entry already exist for this block? | |
| if (!IV.second) { | |
| if (State == AvailabilityState::Unavailable) { | |
| UnavailableBB = CurrBB; | |
| break; // Backpropagate unavailability info. | |
| } | |
| #ifndef NDEBUG | |
| AvailableBBs.emplace_back(CurrBB); | |
| #endif | |
| continue; // Don't recurse further, but continue processing worklist. | |
| } | |
| // No entry found for block. | |
| ++NumNewNewSpeculativelyAvailableBBs; | |
| bool OutOfBudget = NumNewNewSpeculativelyAvailableBBs > MaxBBSpeculations; | |
| // If we have exhausted our budget, mark this block as unavailable. | |
| // Also, if this block has no predecessors, the value isn't live-in here. | |
| if (OutOfBudget || pred_empty(CurrBB)) { | |
| MaxBBSpeculationCutoffReachedTimes += (int)OutOfBudget; | |
| State = AvailabilityState::Unavailable; | |
| UnavailableBB = CurrBB; | |
| break; // Backpropagate unavailability info. | |
| } | |
| // Tentatively consider this block as speculatively available. | |
| #ifndef NDEBUG | |
| NewSpeculativelyAvailableBBs.insert(CurrBB); | |
| #endif | |
| // And further recurse into block's predecessors, in depth-first order! | |
| Worklist.append(pred_begin(CurrBB), pred_end(CurrBB)); | |
| } | |
| #if LLVM_ENABLE_STATS | |
| IsValueFullyAvailableInBlockNumSpeculationsMax.updateMax( | |
| NumNewNewSpeculativelyAvailableBBs); | |
| #endif | |
| // If the block isn't marked as fixpoint yet | |
| // (the Unavailable and Available states are fixpoints) | |
| auto MarkAsFixpointAndEnqueueSuccessors = | |
| [&](BasicBlock *BB, AvailabilityState FixpointState) { | |
| auto It = FullyAvailableBlocks.find(BB); | |
| if (It == FullyAvailableBlocks.end()) | |
| return; // Never queried this block, leave as-is. | |
| switch (AvailabilityState &State = It->second) { | |
| case AvailabilityState::Unavailable: | |
| case AvailabilityState::Available: | |
| return; // Don't backpropagate further, continue processing worklist. | |
| case AvailabilityState::SpeculativelyAvailable: // Fix it! | |
| State = FixpointState; | |
| #ifndef NDEBUG | |
| assert(NewSpeculativelyAvailableBBs.erase(BB) && | |
| "Found a speculatively available successor leftover?"); | |
| #endif | |
| // Queue successors for further processing. | |
| Worklist.append(succ_begin(BB), succ_end(BB)); | |
| return; | |
| } | |
| }; | |
| if (UnavailableBB) { | |
| // Okay, we have encountered an unavailable block. | |
| // Mark speculatively available blocks reachable from UnavailableBB as | |
| // unavailable as well. Paths are terminated when they reach blocks not in | |
| // FullyAvailableBlocks or they are not marked as speculatively available. | |
| Worklist.clear(); | |
| Worklist.append(succ_begin(*UnavailableBB), succ_end(*UnavailableBB)); | |
| while (!Worklist.empty()) | |
| MarkAsFixpointAndEnqueueSuccessors(Worklist.pop_back_val(), | |
| AvailabilityState::Unavailable); | |
| } | |
| #ifndef NDEBUG | |
| Worklist.clear(); | |
| for (BasicBlock *AvailableBB : AvailableBBs) | |
| Worklist.append(succ_begin(AvailableBB), succ_end(AvailableBB)); | |
| while (!Worklist.empty()) | |
| MarkAsFixpointAndEnqueueSuccessors(Worklist.pop_back_val(), | |
| AvailabilityState::Available); | |
| assert(NewSpeculativelyAvailableBBs.empty() && | |
| "Must have fixed all the new speculatively available blocks."); | |
| #endif | |
| return !UnavailableBB; | |
| } | |
| /// Given a set of loads specified by ValuesPerBlock, | |
| /// construct SSA form, allowing us to eliminate Load. This returns the value | |
| /// that should be used at Load's definition site. | |
| static Value * | |
| ConstructSSAForLoadSet(LoadInst *Load, | |
| SmallVectorImpl<AvailableValueInBlock> &ValuesPerBlock, | |
| GVNPass &gvn) { | |
| // Check for the fully redundant, dominating load case. In this case, we can | |
| // just use the dominating value directly. | |
| if (ValuesPerBlock.size() == 1 && | |
| gvn.getDominatorTree().properlyDominates(ValuesPerBlock[0].BB, | |
| Load->getParent())) { | |
| assert(!ValuesPerBlock[0].AV.isUndefValue() && | |
| "Dead BB dominate this block"); | |
| return ValuesPerBlock[0].MaterializeAdjustedValue(Load, gvn); | |
| } | |
| // Otherwise, we have to construct SSA form. | |
| SmallVector<PHINode*, 8> NewPHIs; | |
| SSAUpdater SSAUpdate(&NewPHIs); | |
| SSAUpdate.Initialize(Load->getType(), Load->getName()); | |
| for (const AvailableValueInBlock &AV : ValuesPerBlock) { | |
| BasicBlock *BB = AV.BB; | |
| if (AV.AV.isUndefValue()) | |
| continue; | |
| if (SSAUpdate.HasValueForBlock(BB)) | |
| continue; | |
| // If the value is the load that we will be eliminating, and the block it's | |
| // available in is the block that the load is in, then don't add it as | |
| // SSAUpdater will resolve the value to the relevant phi which may let it | |
| // avoid phi construction entirely if there's actually only one value. | |
| if (BB == Load->getParent() && | |
| ((AV.AV.isSimpleValue() && AV.AV.getSimpleValue() == Load) || | |
| (AV.AV.isCoercedLoadValue() && AV.AV.getCoercedLoadValue() == Load))) | |
| continue; | |
| SSAUpdate.AddAvailableValue(BB, AV.MaterializeAdjustedValue(Load, gvn)); | |
| } | |
| // Perform PHI construction. | |
| return SSAUpdate.GetValueInMiddleOfBlock(Load->getParent()); | |
| } | |
| Value *AvailableValue::MaterializeAdjustedValue(LoadInst *Load, | |
| Instruction *InsertPt, | |
| GVNPass &gvn) const { | |
| Value *Res; | |
| Type *LoadTy = Load->getType(); | |
| const DataLayout &DL = Load->getModule()->getDataLayout(); | |
| if (isSimpleValue()) { | |
| Res = getSimpleValue(); | |
| if (Res->getType() != LoadTy) { | |
| Res = getStoreValueForLoad(Res, Offset, LoadTy, InsertPt, DL); | |
| LLVM_DEBUG(dbgs() << "GVN COERCED NONLOCAL VAL:\nOffset: " << Offset | |
| << " " << *getSimpleValue() << '\n' | |
| << *Res << '\n' | |
| << "\n\n\n"); | |
| } | |
| } else if (isCoercedLoadValue()) { | |
| LoadInst *CoercedLoad = getCoercedLoadValue(); | |
| if (CoercedLoad->getType() == LoadTy && Offset == 0) { | |
| Res = CoercedLoad; | |
| } else { | |
| Res = getLoadValueForLoad(CoercedLoad, Offset, LoadTy, InsertPt, DL); | |
| // We would like to use gvn.markInstructionForDeletion here, but we can't | |
| // because the load is already memoized into the leader map table that GVN | |
| // tracks. It is potentially possible to remove the load from the table, | |
| // but then there all of the operations based on it would need to be | |
| // rehashed. Just leave the dead load around. | |
| gvn.getMemDep().removeInstruction(CoercedLoad); | |
| LLVM_DEBUG(dbgs() << "GVN COERCED NONLOCAL LOAD:\nOffset: " << Offset | |
| << " " << *getCoercedLoadValue() << '\n' | |
| << *Res << '\n' | |
| << "\n\n\n"); | |
| } | |
| } else if (isMemIntrinValue()) { | |
| Res = getMemInstValueForLoad(getMemIntrinValue(), Offset, LoadTy, | |
| InsertPt, DL); | |
| LLVM_DEBUG(dbgs() << "GVN COERCED NONLOCAL MEM INTRIN:\nOffset: " << Offset | |
| << " " << *getMemIntrinValue() << '\n' | |
| << *Res << '\n' | |
| << "\n\n\n"); | |
| } else if (isSelectValue()) { | |
| // Introduce a new value select for a load from an eligible pointer select. | |
| SelectInst *Sel = getSelectValue(); | |
| assert(V1 && V2 && "both value operands of the select must be present"); | |
| Res = SelectInst::Create(Sel->getCondition(), V1, V2, "", Sel); | |
| } else { | |
| llvm_unreachable("Should not materialize value from dead block"); | |
| } | |
| assert(Res && "failed to materialize?"); | |
| return Res; | |
| } | |
| static bool isLifetimeStart(const Instruction *Inst) { | |
| if (const IntrinsicInst* II = dyn_cast<IntrinsicInst>(Inst)) | |
| return II->getIntrinsicID() == Intrinsic::lifetime_start; | |
| return false; | |
| } | |
| /// Assuming To can be reached from both From and Between, does Between lie on | |
| /// every path from From to To? | |
| static bool liesBetween(const Instruction *From, Instruction *Between, | |
| const Instruction *To, DominatorTree *DT) { | |
| if (From->getParent() == Between->getParent()) | |
| return DT->dominates(From, Between); | |
| SmallSet<BasicBlock *, 1> Exclusion; | |
| Exclusion.insert(Between->getParent()); | |
| return !isPotentiallyReachable(From, To, &Exclusion, DT); | |
| } | |
| /// Try to locate the three instruction involved in a missed | |
| /// load-elimination case that is due to an intervening store. | |
| static void reportMayClobberedLoad(LoadInst *Load, MemDepResult DepInfo, | |
| DominatorTree *DT, | |
| OptimizationRemarkEmitter *ORE) { | |
| using namespace ore; | |
| Instruction *OtherAccess = nullptr; | |
| OptimizationRemarkMissed R(DEBUG_TYPE, "LoadClobbered", Load); | |
| R << "load of type " << NV("Type", Load->getType()) << " not eliminated" | |
| << setExtraArgs(); | |
| for (auto *U : Load->getPointerOperand()->users()) { | |
| if (U != Load && (isa<LoadInst>(U) || isa<StoreInst>(U))) { | |
| auto *I = cast<Instruction>(U); | |
| if (I->getFunction() == Load->getFunction() && DT->dominates(I, Load)) { | |
| // Use the most immediately dominating value | |
| if (OtherAccess) { | |
| if (DT->dominates(OtherAccess, I)) | |
| OtherAccess = I; | |
| else | |
| assert(U == OtherAccess || DT->dominates(I, OtherAccess)); | |
| } else | |
| OtherAccess = I; | |
| } | |
| } | |
| } | |
| if (!OtherAccess) { | |
| // There is no dominating use, check if we can find a closest non-dominating | |
| // use that lies between any other potentially available use and Load. | |
| for (auto *U : Load->getPointerOperand()->users()) { | |
| if (U != Load && (isa<LoadInst>(U) || isa<StoreInst>(U))) { | |
| auto *I = cast<Instruction>(U); | |
| if (I->getFunction() == Load->getFunction() && | |
| isPotentiallyReachable(I, Load, nullptr, DT)) { | |
| if (OtherAccess) { | |
| if (liesBetween(OtherAccess, I, Load, DT)) { | |
| OtherAccess = I; | |
| } else if (!liesBetween(I, OtherAccess, Load, DT)) { | |
| // These uses are both partially available at Load were it not for | |
| // the clobber, but neither lies strictly after the other. | |
| OtherAccess = nullptr; | |
| break; | |
| } // else: keep current OtherAccess since it lies between U and Load | |
| } else { | |
| OtherAccess = I; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (OtherAccess) | |
| R << " in favor of " << NV("OtherAccess", OtherAccess); | |
| R << " because it is clobbered by " << NV("ClobberedBy", DepInfo.getInst()); | |
| ORE->emit(R); | |
| } | |
| // Find non-clobbered value for Loc memory location in extended basic block | |
| // (chain of basic blocks with single predecessors) starting From instruction. | |
| static Value *findDominatingValue(const MemoryLocation &Loc, Type *LoadTy, | |
| Instruction *From, AAResults *AA) { | |
| uint32_t NumVisitedInsts = 0; | |
| BasicBlock *FromBB = From->getParent(); | |
| BatchAAResults BatchAA(*AA); | |
| for (BasicBlock *BB = FromBB; BB; BB = BB->getSinglePredecessor()) | |
| for (auto I = BB == FromBB ? From->getReverseIterator() : BB->rbegin(), | |
| E = BB->rend(); | |
| I != E; ++I) { | |
| // Stop the search if limit is reached. | |
| if (++NumVisitedInsts > MaxNumVisitedInsts) | |
| return nullptr; | |
| Instruction *Inst = &*I; | |
| if (isModSet(BatchAA.getModRefInfo(Inst, Loc))) | |
| return nullptr; | |
| if (auto *LI = dyn_cast<LoadInst>(Inst)) | |
| if (LI->getPointerOperand() == Loc.Ptr && LI->getType() == LoadTy) | |
| return LI; | |
| } | |
| return nullptr; | |
| } | |
| std::optional<AvailableValue> | |
| GVNPass::AnalyzeLoadAvailability(LoadInst *Load, MemDepResult DepInfo, | |
| Value *Address) { | |
| assert(Load->isUnordered() && "rules below are incorrect for ordered access"); | |
| assert(DepInfo.isLocal() && "expected a local dependence"); | |
| Instruction *DepInst = DepInfo.getInst(); | |
| const DataLayout &DL = Load->getModule()->getDataLayout(); | |
| if (DepInfo.isClobber()) { | |
| // If the dependence is to a store that writes to a superset of the bits | |
| // read by the load, we can extract the bits we need for the load from the | |
| // stored value. | |
| if (StoreInst *DepSI = dyn_cast<StoreInst>(DepInst)) { | |
| // Can't forward from non-atomic to atomic without violating memory model. | |
| if (Address && Load->isAtomic() <= DepSI->isAtomic()) { | |
| int Offset = | |
| analyzeLoadFromClobberingStore(Load->getType(), Address, DepSI, DL); | |
| if (Offset != -1) | |
| return AvailableValue::get(DepSI->getValueOperand(), Offset); | |
| } | |
| } | |
| // Check to see if we have something like this: | |
| // load i32* P | |
| // load i8* (P+1) | |
| // if we have this, replace the later with an extraction from the former. | |
| if (LoadInst *DepLoad = dyn_cast<LoadInst>(DepInst)) { | |
| // If this is a clobber and L is the first instruction in its block, then | |
| // we have the first instruction in the entry block. | |
| // Can't forward from non-atomic to atomic without violating memory model. | |
| if (DepLoad != Load && Address && | |
| Load->isAtomic() <= DepLoad->isAtomic()) { | |
| Type *LoadType = Load->getType(); | |
| int Offset = -1; | |
| // If MD reported clobber, check it was nested. | |
| if (DepInfo.isClobber() && | |
| canCoerceMustAliasedValueToLoad(DepLoad, LoadType, DL)) { | |
| const auto ClobberOff = MD->getClobberOffset(DepLoad); | |
| // GVN has no deal with a negative offset. | |
| Offset = (ClobberOff == std::nullopt || *ClobberOff < 0) | |
| ? -1 | |
| : *ClobberOff; | |
| } | |
| if (Offset == -1) | |
| Offset = | |
| analyzeLoadFromClobberingLoad(LoadType, Address, DepLoad, DL); | |
| if (Offset != -1) | |
| return AvailableValue::getLoad(DepLoad, Offset); | |
| } | |
| } | |
| // If the clobbering value is a memset/memcpy/memmove, see if we can | |
| // forward a value on from it. | |
| if (MemIntrinsic *DepMI = dyn_cast<MemIntrinsic>(DepInst)) { | |
| if (Address && !Load->isAtomic()) { | |
| int Offset = analyzeLoadFromClobberingMemInst(Load->getType(), Address, | |
| DepMI, DL); | |
| if (Offset != -1) | |
| return AvailableValue::getMI(DepMI, Offset); | |
| } | |
| } | |
| // Nothing known about this clobber, have to be conservative | |
| LLVM_DEBUG( | |
| // fast print dep, using operator<< on instruction is too slow. | |
| dbgs() << "GVN: load "; Load->printAsOperand(dbgs()); | |
| dbgs() << " is clobbered by " << *DepInst << '\n';); | |
| if (ORE->allowExtraAnalysis(DEBUG_TYPE)) | |
| reportMayClobberedLoad(Load, DepInfo, DT, ORE); | |
| return std::nullopt; | |
| } | |
| assert(DepInfo.isDef() && "follows from above"); | |
| // Loading the alloca -> undef. | |
| // Loading immediately after lifetime begin -> undef. | |
| if (isa<AllocaInst>(DepInst) || isLifetimeStart(DepInst)) | |
| return AvailableValue::get(UndefValue::get(Load->getType())); | |
| if (Constant *InitVal = | |
| getInitialValueOfAllocation(DepInst, TLI, Load->getType())) | |
| return AvailableValue::get(InitVal); | |
| if (StoreInst *S = dyn_cast<StoreInst>(DepInst)) { | |
| // Reject loads and stores that are to the same address but are of | |
| // different types if we have to. If the stored value is convertable to | |
| // the loaded value, we can reuse it. | |
| if (!canCoerceMustAliasedValueToLoad(S->getValueOperand(), Load->getType(), | |
| DL)) | |
| return std::nullopt; | |
| // Can't forward from non-atomic to atomic without violating memory model. | |
| if (S->isAtomic() < Load->isAtomic()) | |
| return std::nullopt; | |
| return AvailableValue::get(S->getValueOperand()); | |
| } | |
| if (LoadInst *LD = dyn_cast<LoadInst>(DepInst)) { | |
| // If the types mismatch and we can't handle it, reject reuse of the load. | |
| // If the stored value is larger or equal to the loaded value, we can reuse | |
| // it. | |
| if (!canCoerceMustAliasedValueToLoad(LD, Load->getType(), DL)) | |
| return std::nullopt; | |
| // Can't forward from non-atomic to atomic without violating memory model. | |
| if (LD->isAtomic() < Load->isAtomic()) | |
| return std::nullopt; | |
| return AvailableValue::getLoad(LD); | |
| } | |
| // Check if load with Addr dependent from select can be converted to select | |
| // between load values. There must be no instructions between the found | |
| // loads and DepInst that may clobber the loads. | |
| if (auto *Sel = dyn_cast<SelectInst>(DepInst)) { | |
| assert(Sel->getType() == Load->getPointerOperandType()); | |
| auto Loc = MemoryLocation::get(Load); | |
| Value *V1 = | |
| findDominatingValue(Loc.getWithNewPtr(Sel->getTrueValue()), | |
| Load->getType(), DepInst, getAliasAnalysis()); | |
| if (!V1) | |
| return std::nullopt; | |
| Value *V2 = | |
| findDominatingValue(Loc.getWithNewPtr(Sel->getFalseValue()), | |
| Load->getType(), DepInst, getAliasAnalysis()); | |
| if (!V2) | |
| return std::nullopt; | |
| return AvailableValue::getSelect(Sel, V1, V2); | |
| } | |
| // Unknown def - must be conservative | |
| LLVM_DEBUG( | |
| // fast print dep, using operator<< on instruction is too slow. | |
| dbgs() << "GVN: load "; Load->printAsOperand(dbgs()); | |
| dbgs() << " has unknown def " << *DepInst << '\n';); | |
| return std::nullopt; | |
| } | |
| void GVNPass::AnalyzeLoadAvailability(LoadInst *Load, LoadDepVect &Deps, | |
| AvailValInBlkVect &ValuesPerBlock, | |
| UnavailBlkVect &UnavailableBlocks) { | |
| // Filter out useless results (non-locals, etc). Keep track of the blocks | |
| // where we have a value available in repl, also keep track of whether we see | |
| // dependencies that produce an unknown value for the load (such as a call | |
| // that could potentially clobber the load). | |
| for (const auto &Dep : Deps) { | |
| BasicBlock *DepBB = Dep.getBB(); | |
| MemDepResult DepInfo = Dep.getResult(); | |
| if (DeadBlocks.count(DepBB)) { | |
| // Dead dependent mem-op disguise as a load evaluating the same value | |
| // as the load in question. | |
| ValuesPerBlock.push_back(AvailableValueInBlock::getUndef(DepBB)); | |
| continue; | |
| } | |
| if (!DepInfo.isLocal()) { | |
| UnavailableBlocks.push_back(DepBB); | |
| continue; | |
| } | |
| // The address being loaded in this non-local block may not be the same as | |
| // the pointer operand of the load if PHI translation occurs. Make sure | |
| // to consider the right address. | |
| if (auto AV = AnalyzeLoadAvailability(Load, DepInfo, Dep.getAddress())) { | |
| // subtlety: because we know this was a non-local dependency, we know | |
| // it's safe to materialize anywhere between the instruction within | |
| // DepInfo and the end of it's block. | |
| ValuesPerBlock.push_back( | |
| AvailableValueInBlock::get(DepBB, std::move(*AV))); | |
| } else { | |
| UnavailableBlocks.push_back(DepBB); | |
| } | |
| } | |
| assert(Deps.size() == ValuesPerBlock.size() + UnavailableBlocks.size() && | |
| "post condition violation"); | |
| } | |
| void GVNPass::eliminatePartiallyRedundantLoad( | |
| LoadInst *Load, AvailValInBlkVect &ValuesPerBlock, | |
| MapVector<BasicBlock *, Value *> &AvailableLoads) { | |
| for (const auto &AvailableLoad : AvailableLoads) { | |
| BasicBlock *UnavailableBlock = AvailableLoad.first; | |
| Value *LoadPtr = AvailableLoad.second; | |
| auto *NewLoad = | |
| new LoadInst(Load->getType(), LoadPtr, Load->getName() + ".pre", | |
| Load->isVolatile(), Load->getAlign(), Load->getOrdering(), | |
| Load->getSyncScopeID(), UnavailableBlock->getTerminator()); | |
| NewLoad->setDebugLoc(Load->getDebugLoc()); | |
| if (MSSAU) { | |
| auto *MSSA = MSSAU->getMemorySSA(); | |
| // Get the defining access of the original load or use the load if it is a | |
| // MemoryDef (e.g. because it is volatile). The inserted loads are | |
| // guaranteed to load from the same definition. | |
| auto *LoadAcc = MSSA->getMemoryAccess(Load); | |
| auto *DefiningAcc = | |
| isa<MemoryDef>(LoadAcc) ? LoadAcc : LoadAcc->getDefiningAccess(); | |
| auto *NewAccess = MSSAU->createMemoryAccessInBB( | |
| NewLoad, DefiningAcc, NewLoad->getParent(), | |
| MemorySSA::BeforeTerminator); | |
| if (auto *NewDef = dyn_cast<MemoryDef>(NewAccess)) | |
| MSSAU->insertDef(NewDef, /*RenameUses=*/true); | |
| else | |
| MSSAU->insertUse(cast<MemoryUse>(NewAccess), /*RenameUses=*/true); | |
| } | |
| // Transfer the old load's AA tags to the new load. | |
| AAMDNodes Tags = Load->getAAMetadata(); | |
| if (Tags) | |
| NewLoad->setAAMetadata(Tags); | |
| if (auto *MD = Load->getMetadata(LLVMContext::MD_invariant_load)) | |
| NewLoad->setMetadata(LLVMContext::MD_invariant_load, MD); | |
| if (auto *InvGroupMD = Load->getMetadata(LLVMContext::MD_invariant_group)) | |
| NewLoad->setMetadata(LLVMContext::MD_invariant_group, InvGroupMD); | |
| if (auto *RangeMD = Load->getMetadata(LLVMContext::MD_range)) | |
| NewLoad->setMetadata(LLVMContext::MD_range, RangeMD); | |
| if (auto *AccessMD = Load->getMetadata(LLVMContext::MD_access_group)) | |
| if (LI && | |
| LI->getLoopFor(Load->getParent()) == LI->getLoopFor(UnavailableBlock)) | |
| NewLoad->setMetadata(LLVMContext::MD_access_group, AccessMD); | |
| // We do not propagate the old load's debug location, because the new | |
| // load now lives in a different BB, and we want to avoid a jumpy line | |
| // table. | |
| // FIXME: How do we retain source locations without causing poor debugging | |
| // behavior? | |
| // Add the newly created load. | |
| ValuesPerBlock.push_back( | |
| AvailableValueInBlock::get(UnavailableBlock, NewLoad)); | |
| MD->invalidateCachedPointerInfo(LoadPtr); | |
| LLVM_DEBUG(dbgs() << "GVN INSERTED " << *NewLoad << '\n'); | |
| } | |
| // Perform PHI construction. | |
| Value *V = ConstructSSAForLoadSet(Load, ValuesPerBlock, *this); | |
| Load->replaceAllUsesWith(V); | |
| if (isa<PHINode>(V)) | |
| V->takeName(Load); | |
| if (Instruction *I = dyn_cast<Instruction>(V)) | |
| I->setDebugLoc(Load->getDebugLoc()); | |
| if (V->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(V); | |
| markInstructionForDeletion(Load); | |
| ORE->emit([&]() { | |
| return OptimizationRemark(DEBUG_TYPE, "LoadPRE", Load) | |
| << "load eliminated by PRE"; | |
| }); | |
| } | |
| bool GVNPass::PerformLoadPRE(LoadInst *Load, AvailValInBlkVect &ValuesPerBlock, | |
| UnavailBlkVect &UnavailableBlocks) { | |
| // Okay, we have *some* definitions of the value. This means that the value | |
| // is available in some of our (transitive) predecessors. Lets think about | |
| // doing PRE of this load. This will involve inserting a new load into the | |
| // predecessor when it's not available. We could do this in general, but | |
| // prefer to not increase code size. As such, we only do this when we know | |
| // that we only have to insert *one* load (which means we're basically moving | |
| // the load, not inserting a new one). | |
| SmallPtrSet<BasicBlock *, 4> Blockers(UnavailableBlocks.begin(), | |
| UnavailableBlocks.end()); | |
| // Let's find the first basic block with more than one predecessor. Walk | |
| // backwards through predecessors if needed. | |
| BasicBlock *LoadBB = Load->getParent(); | |
| BasicBlock *TmpBB = LoadBB; | |
| // Check that there is no implicit control flow instructions above our load in | |
| // its block. If there is an instruction that doesn't always pass the | |
| // execution to the following instruction, then moving through it may become | |
| // invalid. For example: | |
| // | |
| // int arr[LEN]; | |
| // int index = ???; | |
| // ... | |
| // guard(0 <= index && index < LEN); | |
| // use(arr[index]); | |
| // | |
| // It is illegal to move the array access to any point above the guard, | |
| // because if the index is out of bounds we should deoptimize rather than | |
| // access the array. | |
| // Check that there is no guard in this block above our instruction. | |
| bool MustEnsureSafetyOfSpeculativeExecution = | |
| ICF->isDominatedByICFIFromSameBlock(Load); | |
| while (TmpBB->getSinglePredecessor()) { | |
| TmpBB = TmpBB->getSinglePredecessor(); | |
| if (TmpBB == LoadBB) // Infinite (unreachable) loop. | |
| return false; | |
| if (Blockers.count(TmpBB)) | |
| return false; | |
| // If any of these blocks has more than one successor (i.e. if the edge we | |
| // just traversed was critical), then there are other paths through this | |
| // block along which the load may not be anticipated. Hoisting the load | |
| // above this block would be adding the load to execution paths along | |
| // which it was not previously executed. | |
| if (TmpBB->getTerminator()->getNumSuccessors() != 1) | |
| return false; | |
| // Check that there is no implicit control flow in a block above. | |
| MustEnsureSafetyOfSpeculativeExecution = | |
| MustEnsureSafetyOfSpeculativeExecution || ICF->hasICF(TmpBB); | |
| } | |
| assert(TmpBB); | |
| LoadBB = TmpBB; | |
| // Check to see how many predecessors have the loaded value fully | |
| // available. | |
| MapVector<BasicBlock *, Value *> PredLoads; | |
| DenseMap<BasicBlock *, AvailabilityState> FullyAvailableBlocks; | |
| for (const AvailableValueInBlock &AV : ValuesPerBlock) | |
| FullyAvailableBlocks[AV.BB] = AvailabilityState::Available; | |
| for (BasicBlock *UnavailableBB : UnavailableBlocks) | |
| FullyAvailableBlocks[UnavailableBB] = AvailabilityState::Unavailable; | |
| SmallVector<BasicBlock *, 4> CriticalEdgePred; | |
| for (BasicBlock *Pred : predecessors(LoadBB)) { | |
| // If any predecessor block is an EH pad that does not allow non-PHI | |
| // instructions before the terminator, we can't PRE the load. | |
| if (Pred->getTerminator()->isEHPad()) { | |
| LLVM_DEBUG( | |
| dbgs() << "COULD NOT PRE LOAD BECAUSE OF AN EH PAD PREDECESSOR '" | |
| << Pred->getName() << "': " << *Load << '\n'); | |
| return false; | |
| } | |
| if (IsValueFullyAvailableInBlock(Pred, FullyAvailableBlocks)) { | |
| continue; | |
| } | |
| if (Pred->getTerminator()->getNumSuccessors() != 1) { | |
| if (isa<IndirectBrInst>(Pred->getTerminator())) { | |
| LLVM_DEBUG( | |
| dbgs() << "COULD NOT PRE LOAD BECAUSE OF INDBR CRITICAL EDGE '" | |
| << Pred->getName() << "': " << *Load << '\n'); | |
| return false; | |
| } | |
| if (LoadBB->isEHPad()) { | |
| LLVM_DEBUG( | |
| dbgs() << "COULD NOT PRE LOAD BECAUSE OF AN EH PAD CRITICAL EDGE '" | |
| << Pred->getName() << "': " << *Load << '\n'); | |
| return false; | |
| } | |
| // Do not split backedge as it will break the canonical loop form. | |
| if (!isLoadPRESplitBackedgeEnabled()) | |
| if (DT->dominates(LoadBB, Pred)) { | |
| LLVM_DEBUG( | |
| dbgs() | |
| << "COULD NOT PRE LOAD BECAUSE OF A BACKEDGE CRITICAL EDGE '" | |
| << Pred->getName() << "': " << *Load << '\n'); | |
| return false; | |
| } | |
| CriticalEdgePred.push_back(Pred); | |
| } else { | |
| // Only add the predecessors that will not be split for now. | |
| PredLoads[Pred] = nullptr; | |
| } | |
| } | |
| // Decide whether PRE is profitable for this load. | |
| unsigned NumUnavailablePreds = PredLoads.size() + CriticalEdgePred.size(); | |
| assert(NumUnavailablePreds != 0 && | |
| "Fully available value should already be eliminated!"); | |
| // If this load is unavailable in multiple predecessors, reject it. | |
| // FIXME: If we could restructure the CFG, we could make a common pred with | |
| // all the preds that don't have an available Load and insert a new load into | |
| // that one block. | |
| if (NumUnavailablePreds != 1) | |
| return false; | |
| // Now we know where we will insert load. We must ensure that it is safe | |
| // to speculatively execute the load at that points. | |
| if (MustEnsureSafetyOfSpeculativeExecution) { | |
| if (CriticalEdgePred.size()) | |
| if (!isSafeToSpeculativelyExecute(Load, LoadBB->getFirstNonPHI(), AC, DT)) | |
| return false; | |
| for (auto &PL : PredLoads) | |
| if (!isSafeToSpeculativelyExecute(Load, PL.first->getTerminator(), AC, | |
| DT)) | |
| return false; | |
| } | |
| // Split critical edges, and update the unavailable predecessors accordingly. | |
| for (BasicBlock *OrigPred : CriticalEdgePred) { | |
| BasicBlock *NewPred = splitCriticalEdges(OrigPred, LoadBB); | |
| assert(!PredLoads.count(OrigPred) && "Split edges shouldn't be in map!"); | |
| PredLoads[NewPred] = nullptr; | |
| LLVM_DEBUG(dbgs() << "Split critical edge " << OrigPred->getName() << "->" | |
| << LoadBB->getName() << '\n'); | |
| } | |
| // Check if the load can safely be moved to all the unavailable predecessors. | |
| bool CanDoPRE = true; | |
| const DataLayout &DL = Load->getModule()->getDataLayout(); | |
| SmallVector<Instruction*, 8> NewInsts; | |
| for (auto &PredLoad : PredLoads) { | |
| BasicBlock *UnavailablePred = PredLoad.first; | |
| // Do PHI translation to get its value in the predecessor if necessary. The | |
| // returned pointer (if non-null) is guaranteed to dominate UnavailablePred. | |
| // We do the translation for each edge we skipped by going from Load's block | |
| // to LoadBB, otherwise we might miss pieces needing translation. | |
| // If all preds have a single successor, then we know it is safe to insert | |
| // the load on the pred (?!?), so we can insert code to materialize the | |
| // pointer if it is not available. | |
| Value *LoadPtr = Load->getPointerOperand(); | |
| BasicBlock *Cur = Load->getParent(); | |
| while (Cur != LoadBB) { | |
| PHITransAddr Address(LoadPtr, DL, AC); | |
| LoadPtr = Address.PHITranslateWithInsertion( | |
| Cur, Cur->getSinglePredecessor(), *DT, NewInsts); | |
| if (!LoadPtr) { | |
| CanDoPRE = false; | |
| break; | |
| } | |
| Cur = Cur->getSinglePredecessor(); | |
| } | |
| if (LoadPtr) { | |
| PHITransAddr Address(LoadPtr, DL, AC); | |
| LoadPtr = Address.PHITranslateWithInsertion(LoadBB, UnavailablePred, *DT, | |
| NewInsts); | |
| } | |
| // If we couldn't find or insert a computation of this phi translated value, | |
| // we fail PRE. | |
| if (!LoadPtr) { | |
| LLVM_DEBUG(dbgs() << "COULDN'T INSERT PHI TRANSLATED VALUE OF: " | |
| << *Load->getPointerOperand() << "\n"); | |
| CanDoPRE = false; | |
| break; | |
| } | |
| PredLoad.second = LoadPtr; | |
| } | |
| if (!CanDoPRE) { | |
| while (!NewInsts.empty()) { | |
| // Erase instructions generated by the failed PHI translation before | |
| // trying to number them. PHI translation might insert instructions | |
| // in basic blocks other than the current one, and we delete them | |
| // directly, as markInstructionForDeletion only allows removing from the | |
| // current basic block. | |
| NewInsts.pop_back_val()->eraseFromParent(); | |
| } | |
| // HINT: Don't revert the edge-splitting as following transformation may | |
| // also need to split these critical edges. | |
| return !CriticalEdgePred.empty(); | |
| } | |
| // Okay, we can eliminate this load by inserting a reload in the predecessor | |
| // and using PHI construction to get the value in the other predecessors, do | |
| // it. | |
| LLVM_DEBUG(dbgs() << "GVN REMOVING PRE LOAD: " << *Load << '\n'); | |
| LLVM_DEBUG(if (!NewInsts.empty()) dbgs() << "INSERTED " << NewInsts.size() | |
| << " INSTS: " << *NewInsts.back() | |
| << '\n'); | |
| // Assign value numbers to the new instructions. | |
| for (Instruction *I : NewInsts) { | |
| // Instructions that have been inserted in predecessor(s) to materialize | |
| // the load address do not retain their original debug locations. Doing | |
| // so could lead to confusing (but correct) source attributions. | |
| I->updateLocationAfterHoist(); | |
| // FIXME: We really _ought_ to insert these value numbers into their | |
| // parent's availability map. However, in doing so, we risk getting into | |
| // ordering issues. If a block hasn't been processed yet, we would be | |
| // marking a value as AVAIL-IN, which isn't what we intend. | |
| VN.lookupOrAdd(I); | |
| } | |
| eliminatePartiallyRedundantLoad(Load, ValuesPerBlock, PredLoads); | |
| ++NumPRELoad; | |
| return true; | |
| } | |
| bool GVNPass::performLoopLoadPRE(LoadInst *Load, | |
| AvailValInBlkVect &ValuesPerBlock, | |
| UnavailBlkVect &UnavailableBlocks) { | |
| if (!LI) | |
| return false; | |
| const Loop *L = LI->getLoopFor(Load->getParent()); | |
| // TODO: Generalize to other loop blocks that dominate the latch. | |
| if (!L || L->getHeader() != Load->getParent()) | |
| return false; | |
| BasicBlock *Preheader = L->getLoopPreheader(); | |
| BasicBlock *Latch = L->getLoopLatch(); | |
| if (!Preheader || !Latch) | |
| return false; | |
| Value *LoadPtr = Load->getPointerOperand(); | |
| // Must be available in preheader. | |
| if (!L->isLoopInvariant(LoadPtr)) | |
| return false; | |
| // We plan to hoist the load to preheader without introducing a new fault. | |
| // In order to do it, we need to prove that we cannot side-exit the loop | |
| // once loop header is first entered before execution of the load. | |
| if (ICF->isDominatedByICFIFromSameBlock(Load)) | |
| return false; | |
| BasicBlock *LoopBlock = nullptr; | |
| for (auto *Blocker : UnavailableBlocks) { | |
| // Blockers from outside the loop are handled in preheader. | |
| if (!L->contains(Blocker)) | |
| continue; | |
| // Only allow one loop block. Loop header is not less frequently executed | |
| // than each loop block, and likely it is much more frequently executed. But | |
| // in case of multiple loop blocks, we need extra information (such as block | |
| // frequency info) to understand whether it is profitable to PRE into | |
| // multiple loop blocks. | |
| if (LoopBlock) | |
| return false; | |
| // Do not sink into inner loops. This may be non-profitable. | |
| if (L != LI->getLoopFor(Blocker)) | |
| return false; | |
| // Blocks that dominate the latch execute on every single iteration, maybe | |
| // except the last one. So PREing into these blocks doesn't make much sense | |
| // in most cases. But the blocks that do not necessarily execute on each | |
| // iteration are sometimes much colder than the header, and this is when | |
| // PRE is potentially profitable. | |
| if (DT->dominates(Blocker, Latch)) | |
| return false; | |
| // Make sure that the terminator itself doesn't clobber. | |
| if (Blocker->getTerminator()->mayWriteToMemory()) | |
| return false; | |
| LoopBlock = Blocker; | |
| } | |
| if (!LoopBlock) | |
| return false; | |
| // Make sure the memory at this pointer cannot be freed, therefore we can | |
| // safely reload from it after clobber. | |
| if (LoadPtr->canBeFreed()) | |
| return false; | |
| // TODO: Support critical edge splitting if blocker has more than 1 successor. | |
| MapVector<BasicBlock *, Value *> AvailableLoads; | |
| AvailableLoads[LoopBlock] = LoadPtr; | |
| AvailableLoads[Preheader] = LoadPtr; | |
| LLVM_DEBUG(dbgs() << "GVN REMOVING PRE LOOP LOAD: " << *Load << '\n'); | |
| eliminatePartiallyRedundantLoad(Load, ValuesPerBlock, AvailableLoads); | |
| ++NumPRELoopLoad; | |
| return true; | |
| } | |
| static void reportLoadElim(LoadInst *Load, Value *AvailableValue, | |
| OptimizationRemarkEmitter *ORE) { | |
| using namespace ore; | |
| ORE->emit([&]() { | |
| return OptimizationRemark(DEBUG_TYPE, "LoadElim", Load) | |
| << "load of type " << NV("Type", Load->getType()) << " eliminated" | |
| << setExtraArgs() << " in favor of " | |
| << NV("InfavorOfValue", AvailableValue); | |
| }); | |
| } | |
| /// Attempt to eliminate a load whose dependencies are | |
| /// non-local by performing PHI construction. | |
| bool GVNPass::processNonLocalLoad(LoadInst *Load) { | |
| // non-local speculations are not allowed under asan. | |
| if (Load->getParent()->getParent()->hasFnAttribute( | |
| Attribute::SanitizeAddress) || | |
| Load->getParent()->getParent()->hasFnAttribute( | |
| Attribute::SanitizeHWAddress)) | |
| return false; | |
| // Step 1: Find the non-local dependencies of the load. | |
| LoadDepVect Deps; | |
| MD->getNonLocalPointerDependency(Load, Deps); | |
| // If we had to process more than one hundred blocks to find the | |
| // dependencies, this load isn't worth worrying about. Optimizing | |
| // it will be too expensive. | |
| unsigned NumDeps = Deps.size(); | |
| if (NumDeps > MaxNumDeps) | |
| return false; | |
| // If we had a phi translation failure, we'll have a single entry which is a | |
| // clobber in the current block. Reject this early. | |
| if (NumDeps == 1 && | |
| !Deps[0].getResult().isDef() && !Deps[0].getResult().isClobber()) { | |
| LLVM_DEBUG(dbgs() << "GVN: non-local load "; Load->printAsOperand(dbgs()); | |
| dbgs() << " has unknown dependencies\n";); | |
| return false; | |
| } | |
| bool Changed = false; | |
| // If this load follows a GEP, see if we can PRE the indices before analyzing. | |
| if (GetElementPtrInst *GEP = | |
| dyn_cast<GetElementPtrInst>(Load->getOperand(0))) { | |
| for (Use &U : GEP->indices()) | |
| if (Instruction *I = dyn_cast<Instruction>(U.get())) | |
| Changed |= performScalarPRE(I); | |
| } | |
| // Step 2: Analyze the availability of the load | |
| AvailValInBlkVect ValuesPerBlock; | |
| UnavailBlkVect UnavailableBlocks; | |
| AnalyzeLoadAvailability(Load, Deps, ValuesPerBlock, UnavailableBlocks); | |
| // If we have no predecessors that produce a known value for this load, exit | |
| // early. | |
| if (ValuesPerBlock.empty()) | |
| return Changed; | |
| // Step 3: Eliminate fully redundancy. | |
| // | |
| // If all of the instructions we depend on produce a known value for this | |
| // load, then it is fully redundant and we can use PHI insertion to compute | |
| // its value. Insert PHIs and remove the fully redundant value now. | |
| if (UnavailableBlocks.empty()) { | |
| LLVM_DEBUG(dbgs() << "GVN REMOVING NONLOCAL LOAD: " << *Load << '\n'); | |
| // Perform PHI construction. | |
| Value *V = ConstructSSAForLoadSet(Load, ValuesPerBlock, *this); | |
| Load->replaceAllUsesWith(V); | |
| if (isa<PHINode>(V)) | |
| V->takeName(Load); | |
| if (Instruction *I = dyn_cast<Instruction>(V)) | |
| // If instruction I has debug info, then we should not update it. | |
| // Also, if I has a null DebugLoc, then it is still potentially incorrect | |
| // to propagate Load's DebugLoc because Load may not post-dominate I. | |
| if (Load->getDebugLoc() && Load->getParent() == I->getParent()) | |
| I->setDebugLoc(Load->getDebugLoc()); | |
| if (V->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(V); | |
| markInstructionForDeletion(Load); | |
| ++NumGVNLoad; | |
| reportLoadElim(Load, V, ORE); | |
| return true; | |
| } | |
| // Step 4: Eliminate partial redundancy. | |
| if (!isPREEnabled() || !isLoadPREEnabled()) | |
| return Changed; | |
| if (!isLoadInLoopPREEnabled() && LI && LI->getLoopFor(Load->getParent())) | |
| return Changed; | |
| if (performLoopLoadPRE(Load, ValuesPerBlock, UnavailableBlocks) || | |
| PerformLoadPRE(Load, ValuesPerBlock, UnavailableBlocks)) | |
| return true; | |
| return Changed; | |
| } | |
| static bool impliesEquivalanceIfTrue(CmpInst* Cmp) { | |
| if (Cmp->getPredicate() == CmpInst::Predicate::ICMP_EQ) | |
| return true; | |
| // Floating point comparisons can be equal, but not equivalent. Cases: | |
| // NaNs for unordered operators | |
| // +0.0 vs 0.0 for all operators | |
| if (Cmp->getPredicate() == CmpInst::Predicate::FCMP_OEQ || | |
| (Cmp->getPredicate() == CmpInst::Predicate::FCMP_UEQ && | |
| Cmp->getFastMathFlags().noNaNs())) { | |
| Value *LHS = Cmp->getOperand(0); | |
| Value *RHS = Cmp->getOperand(1); | |
| // If we can prove either side non-zero, then equality must imply | |
| // equivalence. | |
| // FIXME: We should do this optimization if 'no signed zeros' is | |
| // applicable via an instruction-level fast-math-flag or some other | |
| // indicator that relaxed FP semantics are being used. | |
| if (isa<ConstantFP>(LHS) && !cast<ConstantFP>(LHS)->isZero()) | |
| return true; | |
| if (isa<ConstantFP>(RHS) && !cast<ConstantFP>(RHS)->isZero()) | |
| return true;; | |
| // TODO: Handle vector floating point constants | |
| } | |
| return false; | |
| } | |
| static bool impliesEquivalanceIfFalse(CmpInst* Cmp) { | |
| if (Cmp->getPredicate() == CmpInst::Predicate::ICMP_NE) | |
| return true; | |
| // Floating point comparisons can be equal, but not equivelent. Cases: | |
| // NaNs for unordered operators | |
| // +0.0 vs 0.0 for all operators | |
| if ((Cmp->getPredicate() == CmpInst::Predicate::FCMP_ONE && | |
| Cmp->getFastMathFlags().noNaNs()) || | |
| Cmp->getPredicate() == CmpInst::Predicate::FCMP_UNE) { | |
| Value *LHS = Cmp->getOperand(0); | |
| Value *RHS = Cmp->getOperand(1); | |
| // If we can prove either side non-zero, then equality must imply | |
| // equivalence. | |
| // FIXME: We should do this optimization if 'no signed zeros' is | |
| // applicable via an instruction-level fast-math-flag or some other | |
| // indicator that relaxed FP semantics are being used. | |
| if (isa<ConstantFP>(LHS) && !cast<ConstantFP>(LHS)->isZero()) | |
| return true; | |
| if (isa<ConstantFP>(RHS) && !cast<ConstantFP>(RHS)->isZero()) | |
| return true;; | |
| // TODO: Handle vector floating point constants | |
| } | |
| return false; | |
| } | |
| static bool hasUsersIn(Value *V, BasicBlock *BB) { | |
| return llvm::any_of(V->users(), [BB](User *U) { | |
| auto *I = dyn_cast<Instruction>(U); | |
| return I && I->getParent() == BB; | |
| }); | |
| } | |
| bool GVNPass::processAssumeIntrinsic(AssumeInst *IntrinsicI) { | |
| Value *V = IntrinsicI->getArgOperand(0); | |
| if (ConstantInt *Cond = dyn_cast<ConstantInt>(V)) { | |
| if (Cond->isZero()) { | |
| Type *Int8Ty = Type::getInt8Ty(V->getContext()); | |
| // Insert a new store to null instruction before the load to indicate that | |
| // this code is not reachable. FIXME: We could insert unreachable | |
| // instruction directly because we can modify the CFG. | |
| auto *NewS = new StoreInst(PoisonValue::get(Int8Ty), | |
| Constant::getNullValue(Int8Ty->getPointerTo()), | |
| IntrinsicI); | |
| if (MSSAU) { | |
| const MemoryUseOrDef *FirstNonDom = nullptr; | |
| const auto *AL = | |
| MSSAU->getMemorySSA()->getBlockAccesses(IntrinsicI->getParent()); | |
| // If there are accesses in the current basic block, find the first one | |
| // that does not come before NewS. The new memory access is inserted | |
| // after the found access or before the terminator if no such access is | |
| // found. | |
| if (AL) { | |
| for (const auto &Acc : *AL) { | |
| if (auto *Current = dyn_cast<MemoryUseOrDef>(&Acc)) | |
| if (!Current->getMemoryInst()->comesBefore(NewS)) { | |
| FirstNonDom = Current; | |
| break; | |
| } | |
| } | |
| } | |
| // This added store is to null, so it will never executed and we can | |
| // just use the LiveOnEntry def as defining access. | |
| auto *NewDef = | |
| FirstNonDom ? MSSAU->createMemoryAccessBefore( | |
| NewS, MSSAU->getMemorySSA()->getLiveOnEntryDef(), | |
| const_cast<MemoryUseOrDef *>(FirstNonDom)) | |
| : MSSAU->createMemoryAccessInBB( | |
| NewS, MSSAU->getMemorySSA()->getLiveOnEntryDef(), | |
| NewS->getParent(), MemorySSA::BeforeTerminator); | |
| MSSAU->insertDef(cast<MemoryDef>(NewDef), /*RenameUses=*/false); | |
| } | |
| } | |
| if (isAssumeWithEmptyBundle(*IntrinsicI)) | |
| markInstructionForDeletion(IntrinsicI); | |
| return false; | |
| } else if (isa<Constant>(V)) { | |
| // If it's not false, and constant, it must evaluate to true. This means our | |
| // assume is assume(true), and thus, pointless, and we don't want to do | |
| // anything more here. | |
| return false; | |
| } | |
| Constant *True = ConstantInt::getTrue(V->getContext()); | |
| bool Changed = false; | |
| for (BasicBlock *Successor : successors(IntrinsicI->getParent())) { | |
| BasicBlockEdge Edge(IntrinsicI->getParent(), Successor); | |
| // This property is only true in dominated successors, propagateEquality | |
| // will check dominance for us. | |
| Changed |= propagateEquality(V, True, Edge, false); | |
| } | |
| // We can replace assume value with true, which covers cases like this: | |
| // call void @llvm.assume(i1 %cmp) | |
| // br i1 %cmp, label %bb1, label %bb2 ; will change %cmp to true | |
| ReplaceOperandsWithMap[V] = True; | |
| // Similarly, after assume(!NotV) we know that NotV == false. | |
| Value *NotV; | |
| if (match(V, m_Not(m_Value(NotV)))) | |
| ReplaceOperandsWithMap[NotV] = ConstantInt::getFalse(V->getContext()); | |
| // If we find an equality fact, canonicalize all dominated uses in this block | |
| // to one of the two values. We heuristically choice the "oldest" of the | |
| // two where age is determined by value number. (Note that propagateEquality | |
| // above handles the cross block case.) | |
| // | |
| // Key case to cover are: | |
| // 1) | |
| // %cmp = fcmp oeq float 3.000000e+00, %0 ; const on lhs could happen | |
| // call void @llvm.assume(i1 %cmp) | |
| // ret float %0 ; will change it to ret float 3.000000e+00 | |
| // 2) | |
| // %load = load float, float* %addr | |
| // %cmp = fcmp oeq float %load, %0 | |
| // call void @llvm.assume(i1 %cmp) | |
| // ret float %load ; will change it to ret float %0 | |
| if (auto *CmpI = dyn_cast<CmpInst>(V)) { | |
| if (impliesEquivalanceIfTrue(CmpI)) { | |
| Value *CmpLHS = CmpI->getOperand(0); | |
| Value *CmpRHS = CmpI->getOperand(1); | |
| // Heuristically pick the better replacement -- the choice of heuristic | |
| // isn't terribly important here, but the fact we canonicalize on some | |
| // replacement is for exposing other simplifications. | |
| // TODO: pull this out as a helper function and reuse w/existing | |
| // (slightly different) logic. | |
| if (isa<Constant>(CmpLHS) && !isa<Constant>(CmpRHS)) | |
| std::swap(CmpLHS, CmpRHS); | |
| if (!isa<Instruction>(CmpLHS) && isa<Instruction>(CmpRHS)) | |
| std::swap(CmpLHS, CmpRHS); | |
| if ((isa<Argument>(CmpLHS) && isa<Argument>(CmpRHS)) || | |
| (isa<Instruction>(CmpLHS) && isa<Instruction>(CmpRHS))) { | |
| // Move the 'oldest' value to the right-hand side, using the value | |
| // number as a proxy for age. | |
| uint32_t LVN = VN.lookupOrAdd(CmpLHS); | |
| uint32_t RVN = VN.lookupOrAdd(CmpRHS); | |
| if (LVN < RVN) | |
| std::swap(CmpLHS, CmpRHS); | |
| } | |
| // Handle degenerate case where we either haven't pruned a dead path or a | |
| // removed a trivial assume yet. | |
| if (isa<Constant>(CmpLHS) && isa<Constant>(CmpRHS)) | |
| return Changed; | |
| LLVM_DEBUG(dbgs() << "Replacing dominated uses of " | |
| << *CmpLHS << " with " | |
| << *CmpRHS << " in block " | |
| << IntrinsicI->getParent()->getName() << "\n"); | |
| // Setup the replacement map - this handles uses within the same block | |
| if (hasUsersIn(CmpLHS, IntrinsicI->getParent())) | |
| ReplaceOperandsWithMap[CmpLHS] = CmpRHS; | |
| // NOTE: The non-block local cases are handled by the call to | |
| // propagateEquality above; this block is just about handling the block | |
| // local cases. TODO: There's a bunch of logic in propagateEqualiy which | |
| // isn't duplicated for the block local case, can we share it somehow? | |
| } | |
| } | |
| return Changed; | |
| } | |
| static void patchAndReplaceAllUsesWith(Instruction *I, Value *Repl) { | |
| patchReplacementInstruction(I, Repl); | |
| I->replaceAllUsesWith(Repl); | |
| } | |
| /// Attempt to eliminate a load, first by eliminating it | |
| /// locally, and then attempting non-local elimination if that fails. | |
| bool GVNPass::processLoad(LoadInst *L) { | |
| if (!MD) | |
| return false; | |
| // This code hasn't been audited for ordered or volatile memory access | |
| if (!L->isUnordered()) | |
| return false; | |
| if (L->use_empty()) { | |
| markInstructionForDeletion(L); | |
| return true; | |
| } | |
| // ... to a pointer that has been loaded from before... | |
| MemDepResult Dep = MD->getDependency(L); | |
| // If it is defined in another block, try harder. | |
| if (Dep.isNonLocal()) | |
| return processNonLocalLoad(L); | |
| // Only handle the local case below | |
| if (!Dep.isLocal()) { | |
| // This might be a NonFuncLocal or an Unknown | |
| LLVM_DEBUG( | |
| // fast print dep, using operator<< on instruction is too slow. | |
| dbgs() << "GVN: load "; L->printAsOperand(dbgs()); | |
| dbgs() << " has unknown dependence\n";); | |
| return false; | |
| } | |
| auto AV = AnalyzeLoadAvailability(L, Dep, L->getPointerOperand()); | |
| if (!AV) | |
| return false; | |
| Value *AvailableValue = AV->MaterializeAdjustedValue(L, L, *this); | |
| // Replace the load! | |
| patchAndReplaceAllUsesWith(L, AvailableValue); | |
| markInstructionForDeletion(L); | |
| if (MSSAU) | |
| MSSAU->removeMemoryAccess(L); | |
| ++NumGVNLoad; | |
| reportLoadElim(L, AvailableValue, ORE); | |
| // Tell MDA to reexamine the reused pointer since we might have more | |
| // information after forwarding it. | |
| if (MD && AvailableValue->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(AvailableValue); | |
| return true; | |
| } | |
| /// Return a pair the first field showing the value number of \p Exp and the | |
| /// second field showing whether it is a value number newly created. | |
| std::pair<uint32_t, bool> | |
| GVNPass::ValueTable::assignExpNewValueNum(Expression &Exp) { | |
| uint32_t &e = expressionNumbering[Exp]; | |
| bool CreateNewValNum = !e; | |
| if (CreateNewValNum) { | |
| Expressions.push_back(Exp); | |
| if (ExprIdx.size() < nextValueNumber + 1) | |
| ExprIdx.resize(nextValueNumber * 2); | |
| e = nextValueNumber; | |
| ExprIdx[nextValueNumber++] = nextExprNumber++; | |
| } | |
| return {e, CreateNewValNum}; | |
| } | |
| /// Return whether all the values related with the same \p num are | |
| /// defined in \p BB. | |
| bool GVNPass::ValueTable::areAllValsInBB(uint32_t Num, const BasicBlock *BB, | |
| GVNPass &Gvn) { | |
| LeaderTableEntry *Vals = &Gvn.LeaderTable[Num]; | |
| while (Vals && Vals->BB == BB) | |
| Vals = Vals->Next; | |
| return !Vals; | |
| } | |
| /// Wrap phiTranslateImpl to provide caching functionality. | |
| uint32_t GVNPass::ValueTable::phiTranslate(const BasicBlock *Pred, | |
| const BasicBlock *PhiBlock, | |
| uint32_t Num, GVNPass &Gvn) { | |
| auto FindRes = PhiTranslateTable.find({Num, Pred}); | |
| if (FindRes != PhiTranslateTable.end()) | |
| return FindRes->second; | |
| uint32_t NewNum = phiTranslateImpl(Pred, PhiBlock, Num, Gvn); | |
| PhiTranslateTable.insert({{Num, Pred}, NewNum}); | |
| return NewNum; | |
| } | |
| // Return true if the value number \p Num and NewNum have equal value. | |
| // Return false if the result is unknown. | |
| bool GVNPass::ValueTable::areCallValsEqual(uint32_t Num, uint32_t NewNum, | |
| const BasicBlock *Pred, | |
| const BasicBlock *PhiBlock, | |
| GVNPass &Gvn) { | |
| CallInst *Call = nullptr; | |
| LeaderTableEntry *Vals = &Gvn.LeaderTable[Num]; | |
| while (Vals) { | |
| Call = dyn_cast<CallInst>(Vals->Val); | |
| if (Call && Call->getParent() == PhiBlock) | |
| break; | |
| Vals = Vals->Next; | |
| } | |
| if (AA->doesNotAccessMemory(Call)) | |
| return true; | |
| if (!MD || !AA->onlyReadsMemory(Call)) | |
| return false; | |
| MemDepResult local_dep = MD->getDependency(Call); | |
| if (!local_dep.isNonLocal()) | |
| return false; | |
| const MemoryDependenceResults::NonLocalDepInfo &deps = | |
| MD->getNonLocalCallDependency(Call); | |
| // Check to see if the Call has no function local clobber. | |
| for (const NonLocalDepEntry &D : deps) { | |
| if (D.getResult().isNonFuncLocal()) | |
| return true; | |
| } | |
| return false; | |
| } | |
| /// Translate value number \p Num using phis, so that it has the values of | |
| /// the phis in BB. | |
| uint32_t GVNPass::ValueTable::phiTranslateImpl(const BasicBlock *Pred, | |
| const BasicBlock *PhiBlock, | |
| uint32_t Num, GVNPass &Gvn) { | |
| if (PHINode *PN = NumberingPhi[Num]) { | |
| for (unsigned i = 0; i != PN->getNumIncomingValues(); ++i) { | |
| if (PN->getParent() == PhiBlock && PN->getIncomingBlock(i) == Pred) | |
| if (uint32_t TransVal = lookup(PN->getIncomingValue(i), false)) | |
| return TransVal; | |
| } | |
| return Num; | |
| } | |
| // If there is any value related with Num is defined in a BB other than | |
| // PhiBlock, it cannot depend on a phi in PhiBlock without going through | |
| // a backedge. We can do an early exit in that case to save compile time. | |
| if (!areAllValsInBB(Num, PhiBlock, Gvn)) | |
| return Num; | |
| if (Num >= ExprIdx.size() || ExprIdx[Num] == 0) | |
| return Num; | |
| Expression Exp = Expressions[ExprIdx[Num]]; | |
| for (unsigned i = 0; i < Exp.varargs.size(); i++) { | |
| // For InsertValue and ExtractValue, some varargs are index numbers | |
| // instead of value numbers. Those index numbers should not be | |
| // translated. | |
| if ((i > 1 && Exp.opcode == Instruction::InsertValue) || | |
| (i > 0 && Exp.opcode == Instruction::ExtractValue) || | |
| (i > 1 && Exp.opcode == Instruction::ShuffleVector)) | |
| continue; | |
| Exp.varargs[i] = phiTranslate(Pred, PhiBlock, Exp.varargs[i], Gvn); | |
| } | |
| if (Exp.commutative) { | |
| assert(Exp.varargs.size() >= 2 && "Unsupported commutative instruction!"); | |
| if (Exp.varargs[0] > Exp.varargs[1]) { | |
| std::swap(Exp.varargs[0], Exp.varargs[1]); | |
| uint32_t Opcode = Exp.opcode >> 8; | |
| if (Opcode == Instruction::ICmp || Opcode == Instruction::FCmp) | |
| Exp.opcode = (Opcode << 8) | | |
| CmpInst::getSwappedPredicate( | |
| static_cast<CmpInst::Predicate>(Exp.opcode & 255)); | |
| } | |
| } | |
| if (uint32_t NewNum = expressionNumbering[Exp]) { | |
| if (Exp.opcode == Instruction::Call && NewNum != Num) | |
| return areCallValsEqual(Num, NewNum, Pred, PhiBlock, Gvn) ? NewNum : Num; | |
| return NewNum; | |
| } | |
| return Num; | |
| } | |
| /// Erase stale entry from phiTranslate cache so phiTranslate can be computed | |
| /// again. | |
| void GVNPass::ValueTable::eraseTranslateCacheEntry( | |
| uint32_t Num, const BasicBlock &CurrBlock) { | |
| for (const BasicBlock *Pred : predecessors(&CurrBlock)) | |
| PhiTranslateTable.erase({Num, Pred}); | |
| } | |
| // In order to find a leader for a given value number at a | |
| // specific basic block, we first obtain the list of all Values for that number, | |
| // and then scan the list to find one whose block dominates the block in | |
| // question. This is fast because dominator tree queries consist of only | |
| // a few comparisons of DFS numbers. | |
| Value *GVNPass::findLeader(const BasicBlock *BB, uint32_t num) { | |
| LeaderTableEntry Vals = LeaderTable[num]; | |
| if (!Vals.Val) return nullptr; | |
| Value *Val = nullptr; | |
| if (DT->dominates(Vals.BB, BB)) { | |
| Val = Vals.Val; | |
| if (isa<Constant>(Val)) return Val; | |
| } | |
| LeaderTableEntry* Next = Vals.Next; | |
| while (Next) { | |
| if (DT->dominates(Next->BB, BB)) { | |
| if (isa<Constant>(Next->Val)) return Next->Val; | |
| if (!Val) Val = Next->Val; | |
| } | |
| Next = Next->Next; | |
| } | |
| return Val; | |
| } | |
| /// There is an edge from 'Src' to 'Dst'. Return | |
| /// true if every path from the entry block to 'Dst' passes via this edge. In | |
| /// particular 'Dst' must not be reachable via another edge from 'Src'. | |
| static bool isOnlyReachableViaThisEdge(const BasicBlockEdge &E, | |
| DominatorTree *DT) { | |
| // While in theory it is interesting to consider the case in which Dst has | |
| // more than one predecessor, because Dst might be part of a loop which is | |
| // only reachable from Src, in practice it is pointless since at the time | |
| // GVN runs all such loops have preheaders, which means that Dst will have | |
| // been changed to have only one predecessor, namely Src. | |
| const BasicBlock *Pred = E.getEnd()->getSinglePredecessor(); | |
| assert((!Pred || Pred == E.getStart()) && | |
| "No edge between these basic blocks!"); | |
| return Pred != nullptr; | |
| } | |
| void GVNPass::assignBlockRPONumber(Function &F) { | |
| BlockRPONumber.clear(); | |
| uint32_t NextBlockNumber = 1; | |
| ReversePostOrderTraversal<Function *> RPOT(&F); | |
| for (BasicBlock *BB : RPOT) | |
| BlockRPONumber[BB] = NextBlockNumber++; | |
| InvalidBlockRPONumbers = false; | |
| } | |
| bool GVNPass::replaceOperandsForInBlockEquality(Instruction *Instr) const { | |
| bool Changed = false; | |
| for (unsigned OpNum = 0; OpNum < Instr->getNumOperands(); ++OpNum) { | |
| Value *Operand = Instr->getOperand(OpNum); | |
| auto it = ReplaceOperandsWithMap.find(Operand); | |
| if (it != ReplaceOperandsWithMap.end()) { | |
| LLVM_DEBUG(dbgs() << "GVN replacing: " << *Operand << " with " | |
| << *it->second << " in instruction " << *Instr << '\n'); | |
| Instr->setOperand(OpNum, it->second); | |
| Changed = true; | |
| } | |
| } | |
| return Changed; | |
| } | |
| /// The given values are known to be equal in every block | |
| /// dominated by 'Root'. Exploit this, for example by replacing 'LHS' with | |
| /// 'RHS' everywhere in the scope. Returns whether a change was made. | |
| /// If DominatesByEdge is false, then it means that we will propagate the RHS | |
| /// value starting from the end of Root.Start. | |
| bool GVNPass::propagateEquality(Value *LHS, Value *RHS, | |
| const BasicBlockEdge &Root, | |
| bool DominatesByEdge) { | |
| SmallVector<std::pair<Value*, Value*>, 4> Worklist; | |
| Worklist.push_back(std::make_pair(LHS, RHS)); | |
| bool Changed = false; | |
| // For speed, compute a conservative fast approximation to | |
| // DT->dominates(Root, Root.getEnd()); | |
| const bool RootDominatesEnd = isOnlyReachableViaThisEdge(Root, DT); | |
| while (!Worklist.empty()) { | |
| std::pair<Value*, Value*> Item = Worklist.pop_back_val(); | |
| LHS = Item.first; RHS = Item.second; | |
| if (LHS == RHS) | |
| continue; | |
| assert(LHS->getType() == RHS->getType() && "Equality but unequal types!"); | |
| // Don't try to propagate equalities between constants. | |
| if (isa<Constant>(LHS) && isa<Constant>(RHS)) | |
| continue; | |
| // Prefer a constant on the right-hand side, or an Argument if no constants. | |
| if (isa<Constant>(LHS) || (isa<Argument>(LHS) && !isa<Constant>(RHS))) | |
| std::swap(LHS, RHS); | |
| assert((isa<Argument>(LHS) || isa<Instruction>(LHS)) && "Unexpected value!"); | |
| // If there is no obvious reason to prefer the left-hand side over the | |
| // right-hand side, ensure the longest lived term is on the right-hand side, | |
| // so the shortest lived term will be replaced by the longest lived. | |
| // This tends to expose more simplifications. | |
| uint32_t LVN = VN.lookupOrAdd(LHS); | |
| if ((isa<Argument>(LHS) && isa<Argument>(RHS)) || | |
| (isa<Instruction>(LHS) && isa<Instruction>(RHS))) { | |
| // Move the 'oldest' value to the right-hand side, using the value number | |
| // as a proxy for age. | |
| uint32_t RVN = VN.lookupOrAdd(RHS); | |
| if (LVN < RVN) { | |
| std::swap(LHS, RHS); | |
| LVN = RVN; | |
| } | |
| } | |
| // If value numbering later sees that an instruction in the scope is equal | |
| // to 'LHS' then ensure it will be turned into 'RHS'. In order to preserve | |
| // the invariant that instructions only occur in the leader table for their | |
| // own value number (this is used by removeFromLeaderTable), do not do this | |
| // if RHS is an instruction (if an instruction in the scope is morphed into | |
| // LHS then it will be turned into RHS by the next GVN iteration anyway, so | |
| // using the leader table is about compiling faster, not optimizing better). | |
| // The leader table only tracks basic blocks, not edges. Only add to if we | |
| // have the simple case where the edge dominates the end. | |
| if (RootDominatesEnd && !isa<Instruction>(RHS)) | |
| addToLeaderTable(LVN, RHS, Root.getEnd()); | |
| // Replace all occurrences of 'LHS' with 'RHS' everywhere in the scope. As | |
| // LHS always has at least one use that is not dominated by Root, this will | |
| // never do anything if LHS has only one use. | |
| if (!LHS->hasOneUse()) { | |
| unsigned NumReplacements = | |
| DominatesByEdge | |
| ? replaceDominatedUsesWith(LHS, RHS, *DT, Root) | |
| : replaceDominatedUsesWith(LHS, RHS, *DT, Root.getStart()); | |
| Changed |= NumReplacements > 0; | |
| NumGVNEqProp += NumReplacements; | |
| // Cached information for anything that uses LHS will be invalid. | |
| if (MD) | |
| MD->invalidateCachedPointerInfo(LHS); | |
| } | |
| // Now try to deduce additional equalities from this one. For example, if | |
| // the known equality was "(A != B)" == "false" then it follows that A and B | |
| // are equal in the scope. Only boolean equalities with an explicit true or | |
| // false RHS are currently supported. | |
| if (!RHS->getType()->isIntegerTy(1)) | |
| // Not a boolean equality - bail out. | |
| continue; | |
| ConstantInt *CI = dyn_cast<ConstantInt>(RHS); | |
| if (!CI) | |
| // RHS neither 'true' nor 'false' - bail out. | |
| continue; | |
| // Whether RHS equals 'true'. Otherwise it equals 'false'. | |
| bool isKnownTrue = CI->isMinusOne(); | |
| bool isKnownFalse = !isKnownTrue; | |
| // If "A && B" is known true then both A and B are known true. If "A || B" | |
| // is known false then both A and B are known false. | |
| Value *A, *B; | |
| if ((isKnownTrue && match(LHS, m_LogicalAnd(m_Value(A), m_Value(B)))) || | |
| (isKnownFalse && match(LHS, m_LogicalOr(m_Value(A), m_Value(B))))) { | |
| Worklist.push_back(std::make_pair(A, RHS)); | |
| Worklist.push_back(std::make_pair(B, RHS)); | |
| continue; | |
| } | |
| // If we are propagating an equality like "(A == B)" == "true" then also | |
| // propagate the equality A == B. When propagating a comparison such as | |
| // "(A >= B)" == "true", replace all instances of "A < B" with "false". | |
| if (CmpInst *Cmp = dyn_cast<CmpInst>(LHS)) { | |
| Value *Op0 = Cmp->getOperand(0), *Op1 = Cmp->getOperand(1); | |
| // If "A == B" is known true, or "A != B" is known false, then replace | |
| // A with B everywhere in the scope. For floating point operations, we | |
| // have to be careful since equality does not always imply equivalance. | |
| if ((isKnownTrue && impliesEquivalanceIfTrue(Cmp)) || | |
| (isKnownFalse && impliesEquivalanceIfFalse(Cmp))) | |
| Worklist.push_back(std::make_pair(Op0, Op1)); | |
| // If "A >= B" is known true, replace "A < B" with false everywhere. | |
| CmpInst::Predicate NotPred = Cmp->getInversePredicate(); | |
| Constant *NotVal = ConstantInt::get(Cmp->getType(), isKnownFalse); | |
| // Since we don't have the instruction "A < B" immediately to hand, work | |
| // out the value number that it would have and use that to find an | |
| // appropriate instruction (if any). | |
| uint32_t NextNum = VN.getNextUnusedValueNumber(); | |
| uint32_t Num = VN.lookupOrAddCmp(Cmp->getOpcode(), NotPred, Op0, Op1); | |
| // If the number we were assigned was brand new then there is no point in | |
| // looking for an instruction realizing it: there cannot be one! | |
| if (Num < NextNum) { | |
| Value *NotCmp = findLeader(Root.getEnd(), Num); | |
| if (NotCmp && isa<Instruction>(NotCmp)) { | |
| unsigned NumReplacements = | |
| DominatesByEdge | |
| ? replaceDominatedUsesWith(NotCmp, NotVal, *DT, Root) | |
| : replaceDominatedUsesWith(NotCmp, NotVal, *DT, | |
| Root.getStart()); | |
| Changed |= NumReplacements > 0; | |
| NumGVNEqProp += NumReplacements; | |
| // Cached information for anything that uses NotCmp will be invalid. | |
| if (MD) | |
| MD->invalidateCachedPointerInfo(NotCmp); | |
| } | |
| } | |
| // Ensure that any instruction in scope that gets the "A < B" value number | |
| // is replaced with false. | |
| // The leader table only tracks basic blocks, not edges. Only add to if we | |
| // have the simple case where the edge dominates the end. | |
| if (RootDominatesEnd) | |
| addToLeaderTable(Num, NotVal, Root.getEnd()); | |
| continue; | |
| } | |
| } | |
| return Changed; | |
| } | |
| /// When calculating availability, handle an instruction | |
| /// by inserting it into the appropriate sets | |
| bool GVNPass::processInstruction(Instruction *I) { | |
| // Ignore dbg info intrinsics. | |
| if (isa<DbgInfoIntrinsic>(I)) | |
| return false; | |
| // If the instruction can be easily simplified then do so now in preference | |
| // to value numbering it. Value numbering often exposes redundancies, for | |
| // example if it determines that %y is equal to %x then the instruction | |
| // "%z = and i32 %x, %y" becomes "%z = and i32 %x, %x" which we now simplify. | |
| const DataLayout &DL = I->getModule()->getDataLayout(); | |
| if (Value *V = simplifyInstruction(I, {DL, TLI, DT, AC})) { | |
| bool Changed = false; | |
| if (!I->use_empty()) { | |
| // Simplification can cause a special instruction to become not special. | |
| // For example, devirtualization to a willreturn function. | |
| ICF->removeUsersOf(I); | |
| I->replaceAllUsesWith(V); | |
| Changed = true; | |
| } | |
| if (isInstructionTriviallyDead(I, TLI)) { | |
| markInstructionForDeletion(I); | |
| Changed = true; | |
| } | |
| if (Changed) { | |
| if (MD && V->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(V); | |
| ++NumGVNSimpl; | |
| return true; | |
| } | |
| } | |
| if (auto *Assume = dyn_cast<AssumeInst>(I)) | |
| return processAssumeIntrinsic(Assume); | |
| if (LoadInst *Load = dyn_cast<LoadInst>(I)) { | |
| if (processLoad(Load)) | |
| return true; | |
| unsigned Num = VN.lookupOrAdd(Load); | |
| addToLeaderTable(Num, Load, Load->getParent()); | |
| return false; | |
| } | |
| // For conditional branches, we can perform simple conditional propagation on | |
| // the condition value itself. | |
| if (BranchInst *BI = dyn_cast<BranchInst>(I)) { | |
| if (!BI->isConditional()) | |
| return false; | |
| if (isa<Constant>(BI->getCondition())) | |
| return processFoldableCondBr(BI); | |
| Value *BranchCond = BI->getCondition(); | |
| BasicBlock *TrueSucc = BI->getSuccessor(0); | |
| BasicBlock *FalseSucc = BI->getSuccessor(1); | |
| // Avoid multiple edges early. | |
| if (TrueSucc == FalseSucc) | |
| return false; | |
| BasicBlock *Parent = BI->getParent(); | |
| bool Changed = false; | |
| Value *TrueVal = ConstantInt::getTrue(TrueSucc->getContext()); | |
| BasicBlockEdge TrueE(Parent, TrueSucc); | |
| Changed |= propagateEquality(BranchCond, TrueVal, TrueE, true); | |
| Value *FalseVal = ConstantInt::getFalse(FalseSucc->getContext()); | |
| BasicBlockEdge FalseE(Parent, FalseSucc); | |
| Changed |= propagateEquality(BranchCond, FalseVal, FalseE, true); | |
| return Changed; | |
| } | |
| // For switches, propagate the case values into the case destinations. | |
| if (SwitchInst *SI = dyn_cast<SwitchInst>(I)) { | |
| Value *SwitchCond = SI->getCondition(); | |
| BasicBlock *Parent = SI->getParent(); | |
| bool Changed = false; | |
| // Remember how many outgoing edges there are to every successor. | |
| SmallDenseMap<BasicBlock *, unsigned, 16> SwitchEdges; | |
| for (unsigned i = 0, n = SI->getNumSuccessors(); i != n; ++i) | |
| ++SwitchEdges[SI->getSuccessor(i)]; | |
| for (SwitchInst::CaseIt i = SI->case_begin(), e = SI->case_end(); | |
| i != e; ++i) { | |
| BasicBlock *Dst = i->getCaseSuccessor(); | |
| // If there is only a single edge, propagate the case value into it. | |
| if (SwitchEdges.lookup(Dst) == 1) { | |
| BasicBlockEdge E(Parent, Dst); | |
| Changed |= propagateEquality(SwitchCond, i->getCaseValue(), E, true); | |
| } | |
| } | |
| return Changed; | |
| } | |
| // Instructions with void type don't return a value, so there's | |
| // no point in trying to find redundancies in them. | |
| if (I->getType()->isVoidTy()) | |
| return false; | |
| uint32_t NextNum = VN.getNextUnusedValueNumber(); | |
| unsigned Num = VN.lookupOrAdd(I); | |
| // Allocations are always uniquely numbered, so we can save time and memory | |
| // by fast failing them. | |
| if (isa<AllocaInst>(I) || I->isTerminator() || isa<PHINode>(I)) { | |
| addToLeaderTable(Num, I, I->getParent()); | |
| return false; | |
| } | |
| // If the number we were assigned was a brand new VN, then we don't | |
| // need to do a lookup to see if the number already exists | |
| // somewhere in the domtree: it can't! | |
| if (Num >= NextNum) { | |
| addToLeaderTable(Num, I, I->getParent()); | |
| return false; | |
| } | |
| // Perform fast-path value-number based elimination of values inherited from | |
| // dominators. | |
| Value *Repl = findLeader(I->getParent(), Num); | |
| if (!Repl) { | |
| // Failure, just remember this instance for future use. | |
| addToLeaderTable(Num, I, I->getParent()); | |
| return false; | |
| } else if (Repl == I) { | |
| // If I was the result of a shortcut PRE, it might already be in the table | |
| // and the best replacement for itself. Nothing to do. | |
| return false; | |
| } | |
| // Remove it! | |
| patchAndReplaceAllUsesWith(I, Repl); | |
| if (MD && Repl->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(Repl); | |
| markInstructionForDeletion(I); | |
| return true; | |
| } | |
| /// runOnFunction - This is the main transformation entry point for a function. | |
| bool GVNPass::runImpl(Function &F, AssumptionCache &RunAC, DominatorTree &RunDT, | |
| const TargetLibraryInfo &RunTLI, AAResults &RunAA, | |
| MemoryDependenceResults *RunMD, LoopInfo *LI, | |
| OptimizationRemarkEmitter *RunORE, MemorySSA *MSSA) { | |
| AC = &RunAC; | |
| DT = &RunDT; | |
| VN.setDomTree(DT); | |
| TLI = &RunTLI; | |
| VN.setAliasAnalysis(&RunAA); | |
| MD = RunMD; | |
| ImplicitControlFlowTracking ImplicitCFT; | |
| ICF = &ImplicitCFT; | |
| this->LI = LI; | |
| VN.setMemDep(MD); | |
| ORE = RunORE; | |
| InvalidBlockRPONumbers = true; | |
| MemorySSAUpdater Updater(MSSA); | |
| MSSAU = MSSA ? &Updater : nullptr; | |
| bool Changed = false; | |
| bool ShouldContinue = true; | |
| DomTreeUpdater DTU(DT, DomTreeUpdater::UpdateStrategy::Eager); | |
| // Merge unconditional branches, allowing PRE to catch more | |
| // optimization opportunities. | |
| for (BasicBlock &BB : llvm::make_early_inc_range(F)) { | |
| bool removedBlock = MergeBlockIntoPredecessor(&BB, &DTU, LI, MSSAU, MD); | |
| if (removedBlock) | |
| ++NumGVNBlocks; | |
| Changed |= removedBlock; | |
| } | |
| unsigned Iteration = 0; | |
| while (ShouldContinue) { | |
| LLVM_DEBUG(dbgs() << "GVN iteration: " << Iteration << "\n"); | |
| (void) Iteration; | |
| ShouldContinue = iterateOnFunction(F); | |
| Changed |= ShouldContinue; | |
| ++Iteration; | |
| } | |
| if (isPREEnabled()) { | |
| // Fabricate val-num for dead-code in order to suppress assertion in | |
| // performPRE(). | |
| assignValNumForDeadCode(); | |
| bool PREChanged = true; | |
| while (PREChanged) { | |
| PREChanged = performPRE(F); | |
| Changed |= PREChanged; | |
| } | |
| } | |
| // FIXME: Should perform GVN again after PRE does something. PRE can move | |
| // computations into blocks where they become fully redundant. Note that | |
| // we can't do this until PRE's critical edge splitting updates memdep. | |
| // Actually, when this happens, we should just fully integrate PRE into GVN. | |
| cleanupGlobalSets(); | |
| // Do not cleanup DeadBlocks in cleanupGlobalSets() as it's called for each | |
| // iteration. | |
| DeadBlocks.clear(); | |
| if (MSSA && VerifyMemorySSA) | |
| MSSA->verifyMemorySSA(); | |
| return Changed; | |
| } | |
| bool GVNPass::processBlock(BasicBlock *BB) { | |
| // FIXME: Kill off InstrsToErase by doing erasing eagerly in a helper function | |
| // (and incrementing BI before processing an instruction). | |
| assert(InstrsToErase.empty() && | |
| "We expect InstrsToErase to be empty across iterations"); | |
| if (DeadBlocks.count(BB)) | |
| return false; | |
| // Clearing map before every BB because it can be used only for single BB. | |
| ReplaceOperandsWithMap.clear(); | |
| bool ChangedFunction = false; | |
| // Since we may not have visited the input blocks of the phis, we can't | |
| // use our normal hash approach for phis. Instead, simply look for | |
| // obvious duplicates. The first pass of GVN will tend to create | |
| // identical phis, and the second or later passes can eliminate them. | |
| ChangedFunction |= EliminateDuplicatePHINodes(BB); | |
| for (BasicBlock::iterator BI = BB->begin(), BE = BB->end(); | |
| BI != BE;) { | |
| if (!ReplaceOperandsWithMap.empty()) | |
| ChangedFunction |= replaceOperandsForInBlockEquality(&*BI); | |
| ChangedFunction |= processInstruction(&*BI); | |
| if (InstrsToErase.empty()) { | |
| ++BI; | |
| continue; | |
| } | |
| // If we need some instructions deleted, do it now. | |
| NumGVNInstr += InstrsToErase.size(); | |
| // Avoid iterator invalidation. | |
| bool AtStart = BI == BB->begin(); | |
| if (!AtStart) | |
| --BI; | |
| for (auto *I : InstrsToErase) { | |
| assert(I->getParent() == BB && "Removing instruction from wrong block?"); | |
| LLVM_DEBUG(dbgs() << "GVN removed: " << *I << '\n'); | |
| salvageKnowledge(I, AC); | |
| salvageDebugInfo(*I); | |
| if (MD) MD->removeInstruction(I); | |
| if (MSSAU) | |
| MSSAU->removeMemoryAccess(I); | |
| LLVM_DEBUG(verifyRemoved(I)); | |
| ICF->removeInstruction(I); | |
| I->eraseFromParent(); | |
| } | |
| InstrsToErase.clear(); | |
| if (AtStart) | |
| BI = BB->begin(); | |
| else | |
| ++BI; | |
| } | |
| return ChangedFunction; | |
| } | |
| // Instantiate an expression in a predecessor that lacked it. | |
| bool GVNPass::performScalarPREInsertion(Instruction *Instr, BasicBlock *Pred, | |
| BasicBlock *Curr, unsigned int ValNo) { | |
| // Because we are going top-down through the block, all value numbers | |
| // will be available in the predecessor by the time we need them. Any | |
| // that weren't originally present will have been instantiated earlier | |
| // in this loop. | |
| bool success = true; | |
| for (unsigned i = 0, e = Instr->getNumOperands(); i != e; ++i) { | |
| Value *Op = Instr->getOperand(i); | |
| if (isa<Argument>(Op) || isa<Constant>(Op) || isa<GlobalValue>(Op)) | |
| continue; | |
| // This could be a newly inserted instruction, in which case, we won't | |
| // find a value number, and should give up before we hurt ourselves. | |
| // FIXME: Rewrite the infrastructure to let it easier to value number | |
| // and process newly inserted instructions. | |
| if (!VN.exists(Op)) { | |
| success = false; | |
| break; | |
| } | |
| uint32_t TValNo = | |
| VN.phiTranslate(Pred, Curr, VN.lookup(Op), *this); | |
| if (Value *V = findLeader(Pred, TValNo)) { | |
| Instr->setOperand(i, V); | |
| } else { | |
| success = false; | |
| break; | |
| } | |
| } | |
| // Fail out if we encounter an operand that is not available in | |
| // the PRE predecessor. This is typically because of loads which | |
| // are not value numbered precisely. | |
| if (!success) | |
| return false; | |
| Instr->insertBefore(Pred->getTerminator()); | |
| Instr->setName(Instr->getName() + ".pre"); | |
| Instr->setDebugLoc(Instr->getDebugLoc()); | |
| ICF->insertInstructionTo(Instr, Pred); | |
| unsigned Num = VN.lookupOrAdd(Instr); | |
| VN.add(Instr, Num); | |
| // Update the availability map to include the new instruction. | |
| addToLeaderTable(Num, Instr, Pred); | |
| return true; | |
| } | |
| bool GVNPass::performScalarPRE(Instruction *CurInst) { | |
| if (isa<AllocaInst>(CurInst) || CurInst->isTerminator() || | |
| isa<PHINode>(CurInst) || CurInst->getType()->isVoidTy() || | |
| CurInst->mayReadFromMemory() || CurInst->mayHaveSideEffects() || | |
| isa<DbgInfoIntrinsic>(CurInst)) | |
| return false; | |
| // Don't do PRE on compares. The PHI would prevent CodeGenPrepare from | |
| // sinking the compare again, and it would force the code generator to | |
| // move the i1 from processor flags or predicate registers into a general | |
| // purpose register. | |
| if (isa<CmpInst>(CurInst)) | |
| return false; | |
| // Don't do PRE on GEPs. The inserted PHI would prevent CodeGenPrepare from | |
| // sinking the addressing mode computation back to its uses. Extending the | |
| // GEP's live range increases the register pressure, and therefore it can | |
| // introduce unnecessary spills. | |
| // | |
| // This doesn't prevent Load PRE. PHI translation will make the GEP available | |
| // to the load by moving it to the predecessor block if necessary. | |
| if (isa<GetElementPtrInst>(CurInst)) | |
| return false; | |
| if (auto *CallB = dyn_cast<CallBase>(CurInst)) { | |
| // We don't currently value number ANY inline asm calls. | |
| if (CallB->isInlineAsm()) | |
| return false; | |
| // Don't do PRE on convergent calls. | |
| if (CallB->isConvergent()) | |
| return false; | |
| } | |
| uint32_t ValNo = VN.lookup(CurInst); | |
| // Look for the predecessors for PRE opportunities. We're | |
| // only trying to solve the basic diamond case, where | |
| // a value is computed in the successor and one predecessor, | |
| // but not the other. We also explicitly disallow cases | |
| // where the successor is its own predecessor, because they're | |
| // more complicated to get right. | |
| unsigned NumWith = 0; | |
| unsigned NumWithout = 0; | |
| BasicBlock *PREPred = nullptr; | |
| BasicBlock *CurrentBlock = CurInst->getParent(); | |
| // Update the RPO numbers for this function. | |
| if (InvalidBlockRPONumbers) | |
| assignBlockRPONumber(*CurrentBlock->getParent()); | |
| SmallVector<std::pair<Value *, BasicBlock *>, 8> predMap; | |
| for (BasicBlock *P : predecessors(CurrentBlock)) { | |
| // We're not interested in PRE where blocks with predecessors that are | |
| // not reachable. | |
| if (!DT->isReachableFromEntry(P)) { | |
| NumWithout = 2; | |
| break; | |
| } | |
| // It is not safe to do PRE when P->CurrentBlock is a loop backedge. | |
| assert(BlockRPONumber.count(P) && BlockRPONumber.count(CurrentBlock) && | |
| "Invalid BlockRPONumber map."); | |
| if (BlockRPONumber[P] >= BlockRPONumber[CurrentBlock]) { | |
| NumWithout = 2; | |
| break; | |
| } | |
| uint32_t TValNo = VN.phiTranslate(P, CurrentBlock, ValNo, *this); | |
| Value *predV = findLeader(P, TValNo); | |
| if (!predV) { | |
| predMap.push_back(std::make_pair(static_cast<Value *>(nullptr), P)); | |
| PREPred = P; | |
| ++NumWithout; | |
| } else if (predV == CurInst) { | |
| /* CurInst dominates this predecessor. */ | |
| NumWithout = 2; | |
| break; | |
| } else { | |
| predMap.push_back(std::make_pair(predV, P)); | |
| ++NumWith; | |
| } | |
| } | |
| // Don't do PRE when it might increase code size, i.e. when | |
| // we would need to insert instructions in more than one pred. | |
| if (NumWithout > 1 || NumWith == 0) | |
| return false; | |
| // We may have a case where all predecessors have the instruction, | |
| // and we just need to insert a phi node. Otherwise, perform | |
| // insertion. | |
| Instruction *PREInstr = nullptr; | |
| if (NumWithout != 0) { | |
| if (!isSafeToSpeculativelyExecute(CurInst)) { | |
| // It is only valid to insert a new instruction if the current instruction | |
| // is always executed. An instruction with implicit control flow could | |
| // prevent us from doing it. If we cannot speculate the execution, then | |
| // PRE should be prohibited. | |
| if (ICF->isDominatedByICFIFromSameBlock(CurInst)) | |
| return false; | |
| } | |
| // Don't do PRE across indirect branch. | |
| if (isa<IndirectBrInst>(PREPred->getTerminator())) | |
| return false; | |
| // We can't do PRE safely on a critical edge, so instead we schedule | |
| // the edge to be split and perform the PRE the next time we iterate | |
| // on the function. | |
| unsigned SuccNum = GetSuccessorNumber(PREPred, CurrentBlock); | |
| if (isCriticalEdge(PREPred->getTerminator(), SuccNum)) { | |
| toSplit.push_back(std::make_pair(PREPred->getTerminator(), SuccNum)); | |
| return false; | |
| } | |
| // We need to insert somewhere, so let's give it a shot | |
| PREInstr = CurInst->clone(); | |
| if (!performScalarPREInsertion(PREInstr, PREPred, CurrentBlock, ValNo)) { | |
| // If we failed insertion, make sure we remove the instruction. | |
| LLVM_DEBUG(verifyRemoved(PREInstr)); | |
| PREInstr->deleteValue(); | |
| return false; | |
| } | |
| } | |
| // Either we should have filled in the PRE instruction, or we should | |
| // not have needed insertions. | |
| assert(PREInstr != nullptr || NumWithout == 0); | |
| ++NumGVNPRE; | |
| // Create a PHI to make the value available in this block. | |
| PHINode *Phi = | |
| PHINode::Create(CurInst->getType(), predMap.size(), | |
| CurInst->getName() + ".pre-phi", &CurrentBlock->front()); | |
| for (unsigned i = 0, e = predMap.size(); i != e; ++i) { | |
| if (Value *V = predMap[i].first) { | |
| // If we use an existing value in this phi, we have to patch the original | |
| // value because the phi will be used to replace a later value. | |
| patchReplacementInstruction(CurInst, V); | |
| Phi->addIncoming(V, predMap[i].second); | |
| } else | |
| Phi->addIncoming(PREInstr, PREPred); | |
| } | |
| VN.add(Phi, ValNo); | |
| // After creating a new PHI for ValNo, the phi translate result for ValNo will | |
| // be changed, so erase the related stale entries in phi translate cache. | |
| VN.eraseTranslateCacheEntry(ValNo, *CurrentBlock); | |
| addToLeaderTable(ValNo, Phi, CurrentBlock); | |
| Phi->setDebugLoc(CurInst->getDebugLoc()); | |
| CurInst->replaceAllUsesWith(Phi); | |
| if (MD && Phi->getType()->isPtrOrPtrVectorTy()) | |
| MD->invalidateCachedPointerInfo(Phi); | |
| VN.erase(CurInst); | |
| removeFromLeaderTable(ValNo, CurInst, CurrentBlock); | |
| LLVM_DEBUG(dbgs() << "GVN PRE removed: " << *CurInst << '\n'); | |
| if (MD) | |
| MD->removeInstruction(CurInst); | |
| if (MSSAU) | |
| MSSAU->removeMemoryAccess(CurInst); | |
| LLVM_DEBUG(verifyRemoved(CurInst)); | |
| // FIXME: Intended to be markInstructionForDeletion(CurInst), but it causes | |
| // some assertion failures. | |
| ICF->removeInstruction(CurInst); | |
| CurInst->eraseFromParent(); | |
| ++NumGVNInstr; | |
| return true; | |
| } | |
| /// Perform a purely local form of PRE that looks for diamond | |
| /// control flow patterns and attempts to perform simple PRE at the join point. | |
| bool GVNPass::performPRE(Function &F) { | |
| bool Changed = false; | |
| for (BasicBlock *CurrentBlock : depth_first(&F.getEntryBlock())) { | |
| // Nothing to PRE in the entry block. | |
| if (CurrentBlock == &F.getEntryBlock()) | |
| continue; | |
| // Don't perform PRE on an EH pad. | |
| if (CurrentBlock->isEHPad()) | |
| continue; | |
| for (BasicBlock::iterator BI = CurrentBlock->begin(), | |
| BE = CurrentBlock->end(); | |
| BI != BE;) { | |
| Instruction *CurInst = &*BI++; | |
| Changed |= performScalarPRE(CurInst); | |
| } | |
| } | |
| if (splitCriticalEdges()) | |
| Changed = true; | |
| return Changed; | |
| } | |
| /// Split the critical edge connecting the given two blocks, and return | |
| /// the block inserted to the critical edge. | |
| BasicBlock *GVNPass::splitCriticalEdges(BasicBlock *Pred, BasicBlock *Succ) { | |
| // GVN does not require loop-simplify, do not try to preserve it if it is not | |
| // possible. | |
| BasicBlock *BB = SplitCriticalEdge( | |
| Pred, Succ, | |
| CriticalEdgeSplittingOptions(DT, LI, MSSAU).unsetPreserveLoopSimplify()); | |
| if (BB) { | |
| if (MD) | |
| MD->invalidateCachedPredecessors(); | |
| InvalidBlockRPONumbers = true; | |
| } | |
| return BB; | |
| } | |
| /// Split critical edges found during the previous | |
| /// iteration that may enable further optimization. | |
| bool GVNPass::splitCriticalEdges() { | |
| if (toSplit.empty()) | |
| return false; | |
| bool Changed = false; | |
| do { | |
| std::pair<Instruction *, unsigned> Edge = toSplit.pop_back_val(); | |
| Changed |= SplitCriticalEdge(Edge.first, Edge.second, | |
| CriticalEdgeSplittingOptions(DT, LI, MSSAU)) != | |
| nullptr; | |
| } while (!toSplit.empty()); | |
| if (Changed) { | |
| if (MD) | |
| MD->invalidateCachedPredecessors(); | |
| InvalidBlockRPONumbers = true; | |
| } | |
| return Changed; | |
| } | |
| /// Executes one iteration of GVN | |
| bool GVNPass::iterateOnFunction(Function &F) { | |
| cleanupGlobalSets(); | |
| // Top-down walk of the dominator tree | |
| bool Changed = false; | |
| // Needed for value numbering with phi construction to work. | |
| // RPOT walks the graph in its constructor and will not be invalidated during | |
| // processBlock. | |
| ReversePostOrderTraversal<Function *> RPOT(&F); | |
| for (BasicBlock *BB : RPOT) | |
| Changed |= processBlock(BB); | |
| return Changed; | |
| } | |
| void GVNPass::cleanupGlobalSets() { | |
| VN.clear(); | |
| LeaderTable.clear(); | |
| BlockRPONumber.clear(); | |
| TableAllocator.Reset(); | |
| ICF->clear(); | |
| InvalidBlockRPONumbers = true; | |
| } | |
| /// Verify that the specified instruction does not occur in our | |
| /// internal data structures. | |
| void GVNPass::verifyRemoved(const Instruction *Inst) const { | |
| VN.verifyRemoved(Inst); | |
| // Walk through the value number scope to make sure the instruction isn't | |
| // ferreted away in it. | |
| for (const auto &I : LeaderTable) { | |
| const LeaderTableEntry *Node = &I.second; | |
| assert(Node->Val != Inst && "Inst still in value numbering scope!"); | |
| while (Node->Next) { | |
| Node = Node->Next; | |
| assert(Node->Val != Inst && "Inst still in value numbering scope!"); | |
| } | |
| } | |
| } | |
| /// BB is declared dead, which implied other blocks become dead as well. This | |
| /// function is to add all these blocks to "DeadBlocks". For the dead blocks' | |
| /// live successors, update their phi nodes by replacing the operands | |
| /// corresponding to dead blocks with UndefVal. | |
| void GVNPass::addDeadBlock(BasicBlock *BB) { | |
| SmallVector<BasicBlock *, 4> NewDead; | |
| SmallSetVector<BasicBlock *, 4> DF; | |
| NewDead.push_back(BB); | |
| while (!NewDead.empty()) { | |
| BasicBlock *D = NewDead.pop_back_val(); | |
| if (DeadBlocks.count(D)) | |
| continue; | |
| // All blocks dominated by D are dead. | |
| SmallVector<BasicBlock *, 8> Dom; | |
| DT->getDescendants(D, Dom); | |
| DeadBlocks.insert(Dom.begin(), Dom.end()); | |
| // Figure out the dominance-frontier(D). | |
| for (BasicBlock *B : Dom) { | |
| for (BasicBlock *S : successors(B)) { | |
| if (DeadBlocks.count(S)) | |
| continue; | |
| bool AllPredDead = true; | |
| for (BasicBlock *P : predecessors(S)) | |
| if (!DeadBlocks.count(P)) { | |
| AllPredDead = false; | |
| break; | |
| } | |
| if (!AllPredDead) { | |
| // S could be proved dead later on. That is why we don't update phi | |
| // operands at this moment. | |
| DF.insert(S); | |
| } else { | |
| // While S is not dominated by D, it is dead by now. This could take | |
| // place if S already have a dead predecessor before D is declared | |
| // dead. | |
| NewDead.push_back(S); | |
| } | |
| } | |
| } | |
| } | |
| // For the dead blocks' live successors, update their phi nodes by replacing | |
| // the operands corresponding to dead blocks with UndefVal. | |
| for (BasicBlock *B : DF) { | |
| if (DeadBlocks.count(B)) | |
| continue; | |
| // First, split the critical edges. This might also create additional blocks | |
| // to preserve LoopSimplify form and adjust edges accordingly. | |
| SmallVector<BasicBlock *, 4> Preds(predecessors(B)); | |
| for (BasicBlock *P : Preds) { | |
| if (!DeadBlocks.count(P)) | |
| continue; | |
| if (llvm::is_contained(successors(P), B) && | |
| isCriticalEdge(P->getTerminator(), B)) { | |
| if (BasicBlock *S = splitCriticalEdges(P, B)) | |
| DeadBlocks.insert(P = S); | |
| } | |
| } | |
| // Now poison the incoming values from the dead predecessors. | |
| for (BasicBlock *P : predecessors(B)) { | |
| if (!DeadBlocks.count(P)) | |
| continue; | |
| for (PHINode &Phi : B->phis()) { | |
| Phi.setIncomingValueForBlock(P, PoisonValue::get(Phi.getType())); | |
| if (MD) | |
| MD->invalidateCachedPointerInfo(&Phi); | |
| } | |
| } | |
| } | |
| } | |
| // If the given branch is recognized as a foldable branch (i.e. conditional | |
| // branch with constant condition), it will perform following analyses and | |
| // transformation. | |
| // 1) If the dead out-coming edge is a critical-edge, split it. Let | |
| // R be the target of the dead out-coming edge. | |
| // 1) Identify the set of dead blocks implied by the branch's dead outcoming | |
| // edge. The result of this step will be {X| X is dominated by R} | |
| // 2) Identify those blocks which haves at least one dead predecessor. The | |
| // result of this step will be dominance-frontier(R). | |
| // 3) Update the PHIs in DF(R) by replacing the operands corresponding to | |
| // dead blocks with "UndefVal" in an hope these PHIs will optimized away. | |
| // | |
| // Return true iff *NEW* dead code are found. | |
| bool GVNPass::processFoldableCondBr(BranchInst *BI) { | |
| if (!BI || BI->isUnconditional()) | |
| return false; | |
| // If a branch has two identical successors, we cannot declare either dead. | |
| if (BI->getSuccessor(0) == BI->getSuccessor(1)) | |
| return false; | |
| ConstantInt *Cond = dyn_cast<ConstantInt>(BI->getCondition()); | |
| if (!Cond) | |
| return false; | |
| BasicBlock *DeadRoot = | |
| Cond->getZExtValue() ? BI->getSuccessor(1) : BI->getSuccessor(0); | |
| if (DeadBlocks.count(DeadRoot)) | |
| return false; | |
| if (!DeadRoot->getSinglePredecessor()) | |
| DeadRoot = splitCriticalEdges(BI->getParent(), DeadRoot); | |
| addDeadBlock(DeadRoot); | |
| return true; | |
| } | |
| // performPRE() will trigger assert if it comes across an instruction without | |
| // associated val-num. As it normally has far more live instructions than dead | |
| // instructions, it makes more sense just to "fabricate" a val-number for the | |
| // dead code than checking if instruction involved is dead or not. | |
| void GVNPass::assignValNumForDeadCode() { | |
| for (BasicBlock *BB : DeadBlocks) { | |
| for (Instruction &Inst : *BB) { | |
| unsigned ValNum = VN.lookupOrAdd(&Inst); | |
| addToLeaderTable(ValNum, &Inst, BB); | |
| } | |
| } | |
| } | |
| class llvm::gvn::GVNLegacyPass : public FunctionPass { | |
| public: | |
| static char ID; // Pass identification, replacement for typeid | |
| explicit GVNLegacyPass(bool NoMemDepAnalysis = !GVNEnableMemDep) | |
| : FunctionPass(ID), Impl(GVNOptions().setMemDep(!NoMemDepAnalysis)) { | |
| initializeGVNLegacyPassPass(*PassRegistry::getPassRegistry()); | |
| } | |
| bool runOnFunction(Function &F) override { | |
| if (skipFunction(F)) | |
| return false; | |
| auto *LIWP = getAnalysisIfAvailable<LoopInfoWrapperPass>(); | |
| auto *MSSAWP = getAnalysisIfAvailable<MemorySSAWrapperPass>(); | |
| return Impl.runImpl( | |
| F, getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F), | |
| getAnalysis<DominatorTreeWrapperPass>().getDomTree(), | |
| getAnalysis<TargetLibraryInfoWrapperPass>().getTLI(F), | |
| getAnalysis<AAResultsWrapperPass>().getAAResults(), | |
| Impl.isMemDepEnabled() | |
| ? &getAnalysis<MemoryDependenceWrapperPass>().getMemDep() | |
| : nullptr, | |
| LIWP ? &LIWP->getLoopInfo() : nullptr, | |
| &getAnalysis<OptimizationRemarkEmitterWrapperPass>().getORE(), | |
| MSSAWP ? &MSSAWP->getMSSA() : nullptr); | |
| } | |
| void getAnalysisUsage(AnalysisUsage &AU) const override { | |
| AU.addRequired<AssumptionCacheTracker>(); | |
| AU.addRequired<DominatorTreeWrapperPass>(); | |
| AU.addRequired<TargetLibraryInfoWrapperPass>(); | |
| AU.addRequired<LoopInfoWrapperPass>(); | |
| if (Impl.isMemDepEnabled()) | |
| AU.addRequired<MemoryDependenceWrapperPass>(); | |
| AU.addRequired<AAResultsWrapperPass>(); | |
| AU.addPreserved<DominatorTreeWrapperPass>(); | |
| AU.addPreserved<GlobalsAAWrapperPass>(); | |
| AU.addPreserved<TargetLibraryInfoWrapperPass>(); | |
| AU.addPreserved<LoopInfoWrapperPass>(); | |
| AU.addRequired<OptimizationRemarkEmitterWrapperPass>(); | |
| AU.addPreserved<MemorySSAWrapperPass>(); | |
| } | |
| private: | |
| GVNPass Impl; | |
| }; | |
| char GVNLegacyPass::ID = 0; | |
| INITIALIZE_PASS_BEGIN(GVNLegacyPass, "gvn", "Global Value Numbering", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker) | |
| INITIALIZE_PASS_DEPENDENCY(MemoryDependenceWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfoWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(AAResultsWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(GlobalsAAWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(OptimizationRemarkEmitterWrapperPass) | |
| INITIALIZE_PASS_END(GVNLegacyPass, "gvn", "Global Value Numbering", false, false) | |
| // The public interface to this file... | |
| FunctionPass *llvm::createGVNPass(bool NoMemDepAnalysis) { | |
| return new GVNLegacyPass(NoMemDepAnalysis); | |
| } |