| //===- ObjCARCOpts.cpp - ObjC ARC Optimization ----------------------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| /// \file | |
| /// This file defines ObjC ARC optimizations. ARC stands for Automatic | |
| /// Reference Counting and is a system for managing reference counts for objects | |
| /// in Objective C. | |
| /// | |
| /// The optimizations performed include elimination of redundant, partially | |
| /// redundant, and inconsequential reference count operations, elimination of | |
| /// redundant weak pointer operations, and numerous minor simplifications. | |
| /// | |
| /// WARNING: This file knows about certain library functions. It recognizes them | |
| /// by name, and hardwires knowledge of their semantics. | |
| /// | |
| /// WARNING: This file knows about how certain Objective-C library functions are | |
| /// used. Naive LLVM IR transformations which would otherwise be | |
| /// behavior-preserving may break these assumptions. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "ARCRuntimeEntryPoints.h" | |
| #include "BlotMapVector.h" | |
| #include "DependencyAnalysis.h" | |
| #include "ObjCARC.h" | |
| #include "ProvenanceAnalysis.h" | |
| #include "PtrState.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/Analysis/AliasAnalysis.h" | |
| #include "llvm/Analysis/EHPersonalities.h" | |
| #include "llvm/Analysis/ObjCARCAliasAnalysis.h" | |
| #include "llvm/Analysis/ObjCARCAnalysisUtils.h" | |
| #include "llvm/Analysis/ObjCARCInstKind.h" | |
| #include "llvm/Analysis/ObjCARCUtil.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/CFG.h" | |
| #include "llvm/IR/Constant.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DerivedTypes.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/GlobalVariable.h" | |
| #include "llvm/IR/InstIterator.h" | |
| #include "llvm/IR/InstrTypes.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/LLVMContext.h" | |
| #include "llvm/IR/Metadata.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/IR/User.h" | |
| #include "llvm/IR/Value.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include "llvm/Transforms/ObjCARC.h" | |
| #include <cassert> | |
| #include <iterator> | |
| #include <utility> | |
| using namespace llvm; | |
| using namespace llvm::objcarc; | |
| #define DEBUG_TYPE "objc-arc-opts" | |
| static cl::opt<unsigned> MaxPtrStates("arc-opt-max-ptr-states", | |
| cl::Hidden, | |
| cl::desc("Maximum number of ptr states the optimizer keeps track of"), | |
| cl::init(4095)); | |
| /// \defgroup ARCUtilities Utility declarations/definitions specific to ARC. | |
| /// @{ | |
| /// This is similar to GetRCIdentityRoot but it stops as soon | |
| /// as it finds a value with multiple uses. | |
| static const Value *FindSingleUseIdentifiedObject(const Value *Arg) { | |
| // ConstantData (like ConstantPointerNull and UndefValue) is used across | |
| // modules. It's never a single-use value. | |
| if (isa<ConstantData>(Arg)) | |
| return nullptr; | |
| if (Arg->hasOneUse()) { | |
| if (const BitCastInst *BC = dyn_cast<BitCastInst>(Arg)) | |
| return FindSingleUseIdentifiedObject(BC->getOperand(0)); | |
| if (const GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Arg)) | |
| if (GEP->hasAllZeroIndices()) | |
| return FindSingleUseIdentifiedObject(GEP->getPointerOperand()); | |
| if (IsForwarding(GetBasicARCInstKind(Arg))) | |
| return FindSingleUseIdentifiedObject( | |
| cast<CallInst>(Arg)->getArgOperand(0)); | |
| if (!IsObjCIdentifiedObject(Arg)) | |
| return nullptr; | |
| return Arg; | |
| } | |
| // If we found an identifiable object but it has multiple uses, but they are | |
| // trivial uses, we can still consider this to be a single-use value. | |
| if (IsObjCIdentifiedObject(Arg)) { | |
| for (const User *U : Arg->users()) | |
| if (!U->use_empty() || GetRCIdentityRoot(U) != Arg) | |
| return nullptr; | |
| return Arg; | |
| } | |
| return nullptr; | |
| } | |
| /// @} | |
| /// | |
| /// \defgroup ARCOpt ARC Optimization. | |
| /// @{ | |
| // TODO: On code like this: | |
| // | |
| // objc_retain(%x) | |
| // stuff_that_cannot_release() | |
| // objc_autorelease(%x) | |
| // stuff_that_cannot_release() | |
| // objc_retain(%x) | |
| // stuff_that_cannot_release() | |
| // objc_autorelease(%x) | |
| // | |
| // The second retain and autorelease can be deleted. | |
| // TODO: It should be possible to delete | |
| // objc_autoreleasePoolPush and objc_autoreleasePoolPop | |
| // pairs if nothing is actually autoreleased between them. Also, autorelease | |
| // calls followed by objc_autoreleasePoolPop calls (perhaps in ObjC++ code | |
| // after inlining) can be turned into plain release calls. | |
| // TODO: Critical-edge splitting. If the optimial insertion point is | |
| // a critical edge, the current algorithm has to fail, because it doesn't | |
| // know how to split edges. It should be possible to make the optimizer | |
| // think in terms of edges, rather than blocks, and then split critical | |
| // edges on demand. | |
| // TODO: OptimizeSequences could generalized to be Interprocedural. | |
| // TODO: Recognize that a bunch of other objc runtime calls have | |
| // non-escaping arguments and non-releasing arguments, and may be | |
| // non-autoreleasing. | |
| // TODO: Sink autorelease calls as far as possible. Unfortunately we | |
| // usually can't sink them past other calls, which would be the main | |
| // case where it would be useful. | |
| // TODO: The pointer returned from objc_loadWeakRetained is retained. | |
| // TODO: Delete release+retain pairs (rare). | |
| STATISTIC(NumNoops, "Number of no-op objc calls eliminated"); | |
| STATISTIC(NumPartialNoops, "Number of partially no-op objc calls eliminated"); | |
| STATISTIC(NumAutoreleases,"Number of autoreleases converted to releases"); | |
| STATISTIC(NumRets, "Number of return value forwarding " | |
| "retain+autoreleases eliminated"); | |
| STATISTIC(NumRRs, "Number of retain+release paths eliminated"); | |
| STATISTIC(NumPeeps, "Number of calls peephole-optimized"); | |
| #ifndef NDEBUG | |
| STATISTIC(NumRetainsBeforeOpt, | |
| "Number of retains before optimization"); | |
| STATISTIC(NumReleasesBeforeOpt, | |
| "Number of releases before optimization"); | |
| STATISTIC(NumRetainsAfterOpt, | |
| "Number of retains after optimization"); | |
| STATISTIC(NumReleasesAfterOpt, | |
| "Number of releases after optimization"); | |
| #endif | |
| namespace { | |
| /// Per-BasicBlock state. | |
| class BBState { | |
| /// The number of unique control paths from the entry which can reach this | |
| /// block. | |
| unsigned TopDownPathCount = 0; | |
| /// The number of unique control paths to exits from this block. | |
| unsigned BottomUpPathCount = 0; | |
| /// The top-down traversal uses this to record information known about a | |
| /// pointer at the bottom of each block. | |
| BlotMapVector<const Value *, TopDownPtrState> PerPtrTopDown; | |
| /// The bottom-up traversal uses this to record information known about a | |
| /// pointer at the top of each block. | |
| BlotMapVector<const Value *, BottomUpPtrState> PerPtrBottomUp; | |
| /// Effective predecessors of the current block ignoring ignorable edges and | |
| /// ignored backedges. | |
| SmallVector<BasicBlock *, 2> Preds; | |
| /// Effective successors of the current block ignoring ignorable edges and | |
| /// ignored backedges. | |
| SmallVector<BasicBlock *, 2> Succs; | |
| public: | |
| static const unsigned OverflowOccurredValue; | |
| BBState() = default; | |
| using top_down_ptr_iterator = decltype(PerPtrTopDown)::iterator; | |
| using const_top_down_ptr_iterator = decltype(PerPtrTopDown)::const_iterator; | |
| top_down_ptr_iterator top_down_ptr_begin() { return PerPtrTopDown.begin(); } | |
| top_down_ptr_iterator top_down_ptr_end() { return PerPtrTopDown.end(); } | |
| const_top_down_ptr_iterator top_down_ptr_begin() const { | |
| return PerPtrTopDown.begin(); | |
| } | |
| const_top_down_ptr_iterator top_down_ptr_end() const { | |
| return PerPtrTopDown.end(); | |
| } | |
| bool hasTopDownPtrs() const { | |
| return !PerPtrTopDown.empty(); | |
| } | |
| unsigned top_down_ptr_list_size() const { | |
| return std::distance(top_down_ptr_begin(), top_down_ptr_end()); | |
| } | |
| using bottom_up_ptr_iterator = decltype(PerPtrBottomUp)::iterator; | |
| using const_bottom_up_ptr_iterator = | |
| decltype(PerPtrBottomUp)::const_iterator; | |
| bottom_up_ptr_iterator bottom_up_ptr_begin() { | |
| return PerPtrBottomUp.begin(); | |
| } | |
| bottom_up_ptr_iterator bottom_up_ptr_end() { return PerPtrBottomUp.end(); } | |
| const_bottom_up_ptr_iterator bottom_up_ptr_begin() const { | |
| return PerPtrBottomUp.begin(); | |
| } | |
| const_bottom_up_ptr_iterator bottom_up_ptr_end() const { | |
| return PerPtrBottomUp.end(); | |
| } | |
| bool hasBottomUpPtrs() const { | |
| return !PerPtrBottomUp.empty(); | |
| } | |
| unsigned bottom_up_ptr_list_size() const { | |
| return std::distance(bottom_up_ptr_begin(), bottom_up_ptr_end()); | |
| } | |
| /// Mark this block as being an entry block, which has one path from the | |
| /// entry by definition. | |
| void SetAsEntry() { TopDownPathCount = 1; } | |
| /// Mark this block as being an exit block, which has one path to an exit by | |
| /// definition. | |
| void SetAsExit() { BottomUpPathCount = 1; } | |
| /// Attempt to find the PtrState object describing the top down state for | |
| /// pointer Arg. Return a new initialized PtrState describing the top down | |
| /// state for Arg if we do not find one. | |
| TopDownPtrState &getPtrTopDownState(const Value *Arg) { | |
| return PerPtrTopDown[Arg]; | |
| } | |
| /// Attempt to find the PtrState object describing the bottom up state for | |
| /// pointer Arg. Return a new initialized PtrState describing the bottom up | |
| /// state for Arg if we do not find one. | |
| BottomUpPtrState &getPtrBottomUpState(const Value *Arg) { | |
| return PerPtrBottomUp[Arg]; | |
| } | |
| /// Attempt to find the PtrState object describing the bottom up state for | |
| /// pointer Arg. | |
| bottom_up_ptr_iterator findPtrBottomUpState(const Value *Arg) { | |
| return PerPtrBottomUp.find(Arg); | |
| } | |
| void clearBottomUpPointers() { | |
| PerPtrBottomUp.clear(); | |
| } | |
| void clearTopDownPointers() { | |
| PerPtrTopDown.clear(); | |
| } | |
| void InitFromPred(const BBState &Other); | |
| void InitFromSucc(const BBState &Other); | |
| void MergePred(const BBState &Other); | |
| void MergeSucc(const BBState &Other); | |
| /// Compute the number of possible unique paths from an entry to an exit | |
| /// which pass through this block. This is only valid after both the | |
| /// top-down and bottom-up traversals are complete. | |
| /// | |
| /// Returns true if overflow occurred. Returns false if overflow did not | |
| /// occur. | |
| bool GetAllPathCountWithOverflow(unsigned &PathCount) const { | |
| if (TopDownPathCount == OverflowOccurredValue || | |
| BottomUpPathCount == OverflowOccurredValue) | |
| return true; | |
| unsigned long long Product = | |
| (unsigned long long)TopDownPathCount*BottomUpPathCount; | |
| // Overflow occurred if any of the upper bits of Product are set or if all | |
| // the lower bits of Product are all set. | |
| return (Product >> 32) || | |
| ((PathCount = Product) == OverflowOccurredValue); | |
| } | |
| // Specialized CFG utilities. | |
| using edge_iterator = SmallVectorImpl<BasicBlock *>::const_iterator; | |
| edge_iterator pred_begin() const { return Preds.begin(); } | |
| edge_iterator pred_end() const { return Preds.end(); } | |
| edge_iterator succ_begin() const { return Succs.begin(); } | |
| edge_iterator succ_end() const { return Succs.end(); } | |
| void addSucc(BasicBlock *Succ) { Succs.push_back(Succ); } | |
| void addPred(BasicBlock *Pred) { Preds.push_back(Pred); } | |
| bool isExit() const { return Succs.empty(); } | |
| }; | |
| } // end anonymous namespace | |
| const unsigned BBState::OverflowOccurredValue = 0xffffffff; | |
| namespace llvm { | |
| raw_ostream &operator<<(raw_ostream &OS, | |
| BBState &BBState) LLVM_ATTRIBUTE_UNUSED; | |
| } // end namespace llvm | |
| void BBState::InitFromPred(const BBState &Other) { | |
| PerPtrTopDown = Other.PerPtrTopDown; | |
| TopDownPathCount = Other.TopDownPathCount; | |
| } | |
| void BBState::InitFromSucc(const BBState &Other) { | |
| PerPtrBottomUp = Other.PerPtrBottomUp; | |
| BottomUpPathCount = Other.BottomUpPathCount; | |
| } | |
| /// The top-down traversal uses this to merge information about predecessors to | |
| /// form the initial state for a new block. | |
| void BBState::MergePred(const BBState &Other) { | |
| if (TopDownPathCount == OverflowOccurredValue) | |
| return; | |
| // Other.TopDownPathCount can be 0, in which case it is either dead or a | |
| // loop backedge. Loop backedges are special. | |
| TopDownPathCount += Other.TopDownPathCount; | |
| // In order to be consistent, we clear the top down pointers when by adding | |
| // TopDownPathCount becomes OverflowOccurredValue even though "true" overflow | |
| // has not occurred. | |
| if (TopDownPathCount == OverflowOccurredValue) { | |
| clearTopDownPointers(); | |
| return; | |
| } | |
| // Check for overflow. If we have overflow, fall back to conservative | |
| // behavior. | |
| if (TopDownPathCount < Other.TopDownPathCount) { | |
| TopDownPathCount = OverflowOccurredValue; | |
| clearTopDownPointers(); | |
| return; | |
| } | |
| // For each entry in the other set, if our set has an entry with the same key, | |
| // merge the entries. Otherwise, copy the entry and merge it with an empty | |
| // entry. | |
| for (auto MI = Other.top_down_ptr_begin(), ME = Other.top_down_ptr_end(); | |
| MI != ME; ++MI) { | |
| auto Pair = PerPtrTopDown.insert(*MI); | |
| Pair.first->second.Merge(Pair.second ? TopDownPtrState() : MI->second, | |
| /*TopDown=*/true); | |
| } | |
| // For each entry in our set, if the other set doesn't have an entry with the | |
| // same key, force it to merge with an empty entry. | |
| for (auto MI = top_down_ptr_begin(), ME = top_down_ptr_end(); MI != ME; ++MI) | |
| if (Other.PerPtrTopDown.find(MI->first) == Other.PerPtrTopDown.end()) | |
| MI->second.Merge(TopDownPtrState(), /*TopDown=*/true); | |
| } | |
| /// The bottom-up traversal uses this to merge information about successors to | |
| /// form the initial state for a new block. | |
| void BBState::MergeSucc(const BBState &Other) { | |
| if (BottomUpPathCount == OverflowOccurredValue) | |
| return; | |
| // Other.BottomUpPathCount can be 0, in which case it is either dead or a | |
| // loop backedge. Loop backedges are special. | |
| BottomUpPathCount += Other.BottomUpPathCount; | |
| // In order to be consistent, we clear the top down pointers when by adding | |
| // BottomUpPathCount becomes OverflowOccurredValue even though "true" overflow | |
| // has not occurred. | |
| if (BottomUpPathCount == OverflowOccurredValue) { | |
| clearBottomUpPointers(); | |
| return; | |
| } | |
| // Check for overflow. If we have overflow, fall back to conservative | |
| // behavior. | |
| if (BottomUpPathCount < Other.BottomUpPathCount) { | |
| BottomUpPathCount = OverflowOccurredValue; | |
| clearBottomUpPointers(); | |
| return; | |
| } | |
| // For each entry in the other set, if our set has an entry with the | |
| // same key, merge the entries. Otherwise, copy the entry and merge | |
| // it with an empty entry. | |
| for (auto MI = Other.bottom_up_ptr_begin(), ME = Other.bottom_up_ptr_end(); | |
| MI != ME; ++MI) { | |
| auto Pair = PerPtrBottomUp.insert(*MI); | |
| Pair.first->second.Merge(Pair.second ? BottomUpPtrState() : MI->second, | |
| /*TopDown=*/false); | |
| } | |
| // For each entry in our set, if the other set doesn't have an entry | |
| // with the same key, force it to merge with an empty entry. | |
| for (auto MI = bottom_up_ptr_begin(), ME = bottom_up_ptr_end(); MI != ME; | |
| ++MI) | |
| if (Other.PerPtrBottomUp.find(MI->first) == Other.PerPtrBottomUp.end()) | |
| MI->second.Merge(BottomUpPtrState(), /*TopDown=*/false); | |
| } | |
| raw_ostream &llvm::operator<<(raw_ostream &OS, BBState &BBInfo) { | |
| // Dump the pointers we are tracking. | |
| OS << " TopDown State:\n"; | |
| if (!BBInfo.hasTopDownPtrs()) { | |
| LLVM_DEBUG(dbgs() << " NONE!\n"); | |
| } else { | |
| for (auto I = BBInfo.top_down_ptr_begin(), E = BBInfo.top_down_ptr_end(); | |
| I != E; ++I) { | |
| const PtrState &P = I->second; | |
| OS << " Ptr: " << *I->first | |
| << "\n KnownSafe: " << (P.IsKnownSafe()?"true":"false") | |
| << "\n ImpreciseRelease: " | |
| << (P.IsTrackingImpreciseReleases()?"true":"false") << "\n" | |
| << " HasCFGHazards: " | |
| << (P.IsCFGHazardAfflicted()?"true":"false") << "\n" | |
| << " KnownPositive: " | |
| << (P.HasKnownPositiveRefCount()?"true":"false") << "\n" | |
| << " Seq: " | |
| << P.GetSeq() << "\n"; | |
| } | |
| } | |
| OS << " BottomUp State:\n"; | |
| if (!BBInfo.hasBottomUpPtrs()) { | |
| LLVM_DEBUG(dbgs() << " NONE!\n"); | |
| } else { | |
| for (auto I = BBInfo.bottom_up_ptr_begin(), E = BBInfo.bottom_up_ptr_end(); | |
| I != E; ++I) { | |
| const PtrState &P = I->second; | |
| OS << " Ptr: " << *I->first | |
| << "\n KnownSafe: " << (P.IsKnownSafe()?"true":"false") | |
| << "\n ImpreciseRelease: " | |
| << (P.IsTrackingImpreciseReleases()?"true":"false") << "\n" | |
| << " HasCFGHazards: " | |
| << (P.IsCFGHazardAfflicted()?"true":"false") << "\n" | |
| << " KnownPositive: " | |
| << (P.HasKnownPositiveRefCount()?"true":"false") << "\n" | |
| << " Seq: " | |
| << P.GetSeq() << "\n"; | |
| } | |
| } | |
| return OS; | |
| } | |
| namespace { | |
| /// The main ARC optimization pass. | |
| class ObjCARCOpt { | |
| bool Changed = false; | |
| bool CFGChanged = false; | |
| ProvenanceAnalysis PA; | |
| /// A cache of references to runtime entry point constants. | |
| ARCRuntimeEntryPoints EP; | |
| /// A cache of MDKinds that can be passed into other functions to propagate | |
| /// MDKind identifiers. | |
| ARCMDKindCache MDKindCache; | |
| BundledRetainClaimRVs *BundledInsts = nullptr; | |
| /// A flag indicating whether the optimization that removes or moves | |
| /// retain/release pairs should be performed. | |
| bool DisableRetainReleasePairing = false; | |
| /// Flags which determine whether each of the interesting runtime functions | |
| /// is in fact used in the current function. | |
| unsigned UsedInThisFunction; | |
| DenseMap<BasicBlock *, ColorVector> BlockEHColors; | |
| bool OptimizeRetainRVCall(Function &F, Instruction *RetainRV); | |
| void OptimizeAutoreleaseRVCall(Function &F, Instruction *AutoreleaseRV, | |
| ARCInstKind &Class); | |
| void OptimizeIndividualCalls(Function &F); | |
| /// Optimize an individual call, optionally passing the | |
| /// GetArgRCIdentityRoot if it has already been computed. | |
| void OptimizeIndividualCallImpl(Function &F, Instruction *Inst, | |
| ARCInstKind Class, const Value *Arg); | |
| /// Try to optimize an AutoreleaseRV with a RetainRV or UnsafeClaimRV. If the | |
| /// optimization occurs, returns true to indicate that the caller should | |
| /// assume the instructions are dead. | |
| bool OptimizeInlinedAutoreleaseRVCall(Function &F, Instruction *Inst, | |
| const Value *&Arg, ARCInstKind Class, | |
| Instruction *AutoreleaseRV, | |
| const Value *&AutoreleaseRVArg); | |
| void CheckForCFGHazards(const BasicBlock *BB, | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BBState &MyStates) const; | |
| bool VisitInstructionBottomUp(Instruction *Inst, BasicBlock *BB, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| BBState &MyStates); | |
| bool VisitBottomUp(BasicBlock *BB, | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains); | |
| bool VisitInstructionTopDown( | |
| Instruction *Inst, DenseMap<Value *, RRInfo> &Releases, BBState &MyStates, | |
| const DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots); | |
| bool VisitTopDown( | |
| BasicBlock *BB, DenseMap<const BasicBlock *, BBState> &BBStates, | |
| DenseMap<Value *, RRInfo> &Releases, | |
| const DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots); | |
| bool Visit(Function &F, DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases); | |
| void MoveCalls(Value *Arg, RRInfo &RetainsToMove, RRInfo &ReleasesToMove, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, | |
| SmallVectorImpl<Instruction *> &DeadInsts, Module *M); | |
| bool PairUpRetainsAndReleases(DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, Module *M, | |
| Instruction *Retain, | |
| SmallVectorImpl<Instruction *> &DeadInsts, | |
| RRInfo &RetainsToMove, RRInfo &ReleasesToMove, | |
| Value *Arg, bool KnownSafe, | |
| bool &AnyPairsCompletelyEliminated); | |
| bool PerformCodePlacement(DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, Module *M); | |
| void OptimizeWeakCalls(Function &F); | |
| bool OptimizeSequences(Function &F); | |
| void OptimizeReturns(Function &F); | |
| template <typename PredicateT> | |
| static void cloneOpBundlesIf(CallBase *CI, | |
| SmallVectorImpl<OperandBundleDef> &OpBundles, | |
| PredicateT Predicate) { | |
| for (unsigned I = 0, E = CI->getNumOperandBundles(); I != E; ++I) { | |
| OperandBundleUse B = CI->getOperandBundleAt(I); | |
| if (Predicate(B)) | |
| OpBundles.emplace_back(B); | |
| } | |
| } | |
| void addOpBundleForFunclet(BasicBlock *BB, | |
| SmallVectorImpl<OperandBundleDef> &OpBundles) { | |
| if (!BlockEHColors.empty()) { | |
| const ColorVector &CV = BlockEHColors.find(BB)->second; | |
| assert(CV.size() > 0 && "Uncolored block"); | |
| for (BasicBlock *EHPadBB : CV) | |
| if (auto *EHPad = dyn_cast<FuncletPadInst>(EHPadBB->getFirstNonPHI())) { | |
| OpBundles.emplace_back("funclet", EHPad); | |
| return; | |
| } | |
| } | |
| } | |
| #ifndef NDEBUG | |
| void GatherStatistics(Function &F, bool AfterOptimization = false); | |
| #endif | |
| public: | |
| void init(Function &F); | |
| bool run(Function &F, AAResults &AA); | |
| bool hasCFGChanged() const { return CFGChanged; } | |
| }; | |
| } // end anonymous namespace | |
| /// Turn objc_retainAutoreleasedReturnValue into objc_retain if the operand is | |
| /// not a return value. | |
| bool | |
| ObjCARCOpt::OptimizeRetainRVCall(Function &F, Instruction *RetainRV) { | |
| // Check for the argument being from an immediately preceding call or invoke. | |
| const Value *Arg = GetArgRCIdentityRoot(RetainRV); | |
| if (const Instruction *Call = dyn_cast<CallBase>(Arg)) { | |
| if (Call->getParent() == RetainRV->getParent()) { | |
| BasicBlock::const_iterator I(Call); | |
| ++I; | |
| while (IsNoopInstruction(&*I)) | |
| ++I; | |
| if (&*I == RetainRV) | |
| return false; | |
| } else if (const InvokeInst *II = dyn_cast<InvokeInst>(Call)) { | |
| BasicBlock *RetainRVParent = RetainRV->getParent(); | |
| if (II->getNormalDest() == RetainRVParent) { | |
| BasicBlock::const_iterator I = RetainRVParent->begin(); | |
| while (IsNoopInstruction(&*I)) | |
| ++I; | |
| if (&*I == RetainRV) | |
| return false; | |
| } | |
| } | |
| } | |
| assert(!BundledInsts->contains(RetainRV) && | |
| "a bundled retainRV's argument should be a call"); | |
| // Turn it to a plain objc_retain. | |
| Changed = true; | |
| ++NumPeeps; | |
| LLVM_DEBUG(dbgs() << "Transforming objc_retainAutoreleasedReturnValue => " | |
| "objc_retain since the operand is not a return value.\n" | |
| "Old = " | |
| << *RetainRV << "\n"); | |
| Function *NewDecl = EP.get(ARCRuntimeEntryPointKind::Retain); | |
| cast<CallInst>(RetainRV)->setCalledFunction(NewDecl); | |
| LLVM_DEBUG(dbgs() << "New = " << *RetainRV << "\n"); | |
| return false; | |
| } | |
| bool ObjCARCOpt::OptimizeInlinedAutoreleaseRVCall( | |
| Function &F, Instruction *Inst, const Value *&Arg, ARCInstKind Class, | |
| Instruction *AutoreleaseRV, const Value *&AutoreleaseRVArg) { | |
| if (BundledInsts->contains(Inst)) | |
| return false; | |
| // Must be in the same basic block. | |
| assert(Inst->getParent() == AutoreleaseRV->getParent()); | |
| // Must operate on the same root. | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| AutoreleaseRVArg = GetArgRCIdentityRoot(AutoreleaseRV); | |
| if (Arg != AutoreleaseRVArg) { | |
| // If there isn't an exact match, check if we have equivalent PHIs. | |
| const PHINode *PN = dyn_cast<PHINode>(Arg); | |
| if (!PN) | |
| return false; | |
| SmallVector<const Value *, 4> ArgUsers; | |
| getEquivalentPHIs(*PN, ArgUsers); | |
| if (!llvm::is_contained(ArgUsers, AutoreleaseRVArg)) | |
| return false; | |
| } | |
| // Okay, this is a match. Merge them. | |
| ++NumPeeps; | |
| LLVM_DEBUG(dbgs() << "Found inlined objc_autoreleaseReturnValue '" | |
| << *AutoreleaseRV << "' paired with '" << *Inst << "'\n"); | |
| // Delete the RV pair, starting with the AutoreleaseRV. | |
| AutoreleaseRV->replaceAllUsesWith( | |
| cast<CallInst>(AutoreleaseRV)->getArgOperand(0)); | |
| Changed = true; | |
| EraseInstruction(AutoreleaseRV); | |
| if (Class == ARCInstKind::RetainRV) { | |
| // AutoreleaseRV and RetainRV cancel out. Delete the RetainRV. | |
| Inst->replaceAllUsesWith(cast<CallInst>(Inst)->getArgOperand(0)); | |
| EraseInstruction(Inst); | |
| return true; | |
| } | |
| // UnsafeClaimRV is a frontend peephole for RetainRV + Release. Since the | |
| // AutoreleaseRV and RetainRV cancel out, replace UnsafeClaimRV with Release. | |
| assert(Class == ARCInstKind::UnsafeClaimRV); | |
| Value *CallArg = cast<CallInst>(Inst)->getArgOperand(0); | |
| CallInst *Release = CallInst::Create( | |
| EP.get(ARCRuntimeEntryPointKind::Release), CallArg, "", Inst); | |
| assert(IsAlwaysTail(ARCInstKind::UnsafeClaimRV) && | |
| "Expected UnsafeClaimRV to be safe to tail call"); | |
| Release->setTailCall(); | |
| Inst->replaceAllUsesWith(CallArg); | |
| EraseInstruction(Inst); | |
| // Run the normal optimizations on Release. | |
| OptimizeIndividualCallImpl(F, Release, ARCInstKind::Release, Arg); | |
| return true; | |
| } | |
| /// Turn objc_autoreleaseReturnValue into objc_autorelease if the result is not | |
| /// used as a return value. | |
| void ObjCARCOpt::OptimizeAutoreleaseRVCall(Function &F, | |
| Instruction *AutoreleaseRV, | |
| ARCInstKind &Class) { | |
| // Check for a return of the pointer value. | |
| const Value *Ptr = GetArgRCIdentityRoot(AutoreleaseRV); | |
| // If the argument is ConstantPointerNull or UndefValue, its other users | |
| // aren't actually interesting to look at. | |
| if (isa<ConstantData>(Ptr)) | |
| return; | |
| SmallVector<const Value *, 2> Users; | |
| Users.push_back(Ptr); | |
| // Add PHIs that are equivalent to Ptr to Users. | |
| if (const PHINode *PN = dyn_cast<PHINode>(Ptr)) | |
| getEquivalentPHIs(*PN, Users); | |
| do { | |
| Ptr = Users.pop_back_val(); | |
| for (const User *U : Ptr->users()) { | |
| if (isa<ReturnInst>(U) || GetBasicARCInstKind(U) == ARCInstKind::RetainRV) | |
| return; | |
| if (isa<BitCastInst>(U)) | |
| Users.push_back(U); | |
| } | |
| } while (!Users.empty()); | |
| Changed = true; | |
| ++NumPeeps; | |
| LLVM_DEBUG( | |
| dbgs() << "Transforming objc_autoreleaseReturnValue => " | |
| "objc_autorelease since its operand is not used as a return " | |
| "value.\n" | |
| "Old = " | |
| << *AutoreleaseRV << "\n"); | |
| CallInst *AutoreleaseRVCI = cast<CallInst>(AutoreleaseRV); | |
| Function *NewDecl = EP.get(ARCRuntimeEntryPointKind::Autorelease); | |
| AutoreleaseRVCI->setCalledFunction(NewDecl); | |
| AutoreleaseRVCI->setTailCall(false); // Never tail call objc_autorelease. | |
| Class = ARCInstKind::Autorelease; | |
| LLVM_DEBUG(dbgs() << "New: " << *AutoreleaseRV << "\n"); | |
| } | |
| /// Visit each call, one at a time, and make simplifications without doing any | |
| /// additional analysis. | |
| void ObjCARCOpt::OptimizeIndividualCalls(Function &F) { | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::OptimizeIndividualCalls ==\n"); | |
| // Reset all the flags in preparation for recomputing them. | |
| UsedInThisFunction = 0; | |
| // Store any delayed AutoreleaseRV intrinsics, so they can be easily paired | |
| // with RetainRV and UnsafeClaimRV. | |
| Instruction *DelayedAutoreleaseRV = nullptr; | |
| const Value *DelayedAutoreleaseRVArg = nullptr; | |
| auto setDelayedAutoreleaseRV = [&](Instruction *AutoreleaseRV) { | |
| assert(!DelayedAutoreleaseRV || !AutoreleaseRV); | |
| DelayedAutoreleaseRV = AutoreleaseRV; | |
| DelayedAutoreleaseRVArg = nullptr; | |
| }; | |
| auto optimizeDelayedAutoreleaseRV = [&]() { | |
| if (!DelayedAutoreleaseRV) | |
| return; | |
| OptimizeIndividualCallImpl(F, DelayedAutoreleaseRV, | |
| ARCInstKind::AutoreleaseRV, | |
| DelayedAutoreleaseRVArg); | |
| setDelayedAutoreleaseRV(nullptr); | |
| }; | |
| auto shouldDelayAutoreleaseRV = [&](Instruction *NonARCInst) { | |
| // Nothing to delay, but we may as well skip the logic below. | |
| if (!DelayedAutoreleaseRV) | |
| return true; | |
| // If we hit the end of the basic block we're not going to find an RV-pair. | |
| // Stop delaying. | |
| if (NonARCInst->isTerminator()) | |
| return false; | |
| // Given the frontend rules for emitting AutoreleaseRV, RetainRV, and | |
| // UnsafeClaimRV, it's probably safe to skip over even opaque function calls | |
| // here since OptimizeInlinedAutoreleaseRVCall will confirm that they | |
| // have the same RCIdentityRoot. However, what really matters is | |
| // skipping instructions or intrinsics that the inliner could leave behind; | |
| // be conservative for now and don't skip over opaque calls, which could | |
| // potentially include other ARC calls. | |
| auto *CB = dyn_cast<CallBase>(NonARCInst); | |
| if (!CB) | |
| return true; | |
| return CB->getIntrinsicID() != Intrinsic::not_intrinsic; | |
| }; | |
| // Visit all objc_* calls in F. | |
| for (inst_iterator I = inst_begin(&F), E = inst_end(&F); I != E; ) { | |
| Instruction *Inst = &*I++; | |
| if (auto *CI = dyn_cast<CallInst>(Inst)) | |
| if (objcarc::hasAttachedCallOpBundle(CI)) { | |
| BundledInsts->insertRVCall(&*I, CI); | |
| Changed = true; | |
| } | |
| ARCInstKind Class = GetBasicARCInstKind(Inst); | |
| // Skip this loop if this instruction isn't itself an ARC intrinsic. | |
| const Value *Arg = nullptr; | |
| switch (Class) { | |
| default: | |
| optimizeDelayedAutoreleaseRV(); | |
| break; | |
| case ARCInstKind::CallOrUser: | |
| case ARCInstKind::User: | |
| case ARCInstKind::None: | |
| // This is a non-ARC instruction. If we're delaying an AutoreleaseRV, | |
| // check if it's safe to skip over it; if not, optimize the AutoreleaseRV | |
| // now. | |
| if (!shouldDelayAutoreleaseRV(Inst)) | |
| optimizeDelayedAutoreleaseRV(); | |
| continue; | |
| case ARCInstKind::AutoreleaseRV: | |
| optimizeDelayedAutoreleaseRV(); | |
| setDelayedAutoreleaseRV(Inst); | |
| continue; | |
| case ARCInstKind::RetainRV: | |
| case ARCInstKind::UnsafeClaimRV: | |
| if (DelayedAutoreleaseRV) { | |
| // We have a potential RV pair. Check if they cancel out. | |
| if (OptimizeInlinedAutoreleaseRVCall(F, Inst, Arg, Class, | |
| DelayedAutoreleaseRV, | |
| DelayedAutoreleaseRVArg)) { | |
| setDelayedAutoreleaseRV(nullptr); | |
| continue; | |
| } | |
| optimizeDelayedAutoreleaseRV(); | |
| } | |
| break; | |
| } | |
| OptimizeIndividualCallImpl(F, Inst, Class, Arg); | |
| } | |
| // Catch the final delayed AutoreleaseRV. | |
| optimizeDelayedAutoreleaseRV(); | |
| } | |
| /// This function returns true if the value is inert. An ObjC ARC runtime call | |
| /// taking an inert operand can be safely deleted. | |
| static bool isInertARCValue(Value *V, SmallPtrSet<Value *, 1> &VisitedPhis) { | |
| V = V->stripPointerCasts(); | |
| if (IsNullOrUndef(V)) | |
| return true; | |
| // See if this is a global attribute annotated with an 'objc_arc_inert'. | |
| if (auto *GV = dyn_cast<GlobalVariable>(V)) | |
| if (GV->hasAttribute("objc_arc_inert")) | |
| return true; | |
| if (auto PN = dyn_cast<PHINode>(V)) { | |
| // Ignore this phi if it has already been discovered. | |
| if (!VisitedPhis.insert(PN).second) | |
| return true; | |
| // Look through phis's operands. | |
| for (Value *Opnd : PN->incoming_values()) | |
| if (!isInertARCValue(Opnd, VisitedPhis)) | |
| return false; | |
| return true; | |
| } | |
| return false; | |
| } | |
| void ObjCARCOpt::OptimizeIndividualCallImpl(Function &F, Instruction *Inst, | |
| ARCInstKind Class, | |
| const Value *Arg) { | |
| LLVM_DEBUG(dbgs() << "Visiting: Class: " << Class << "; " << *Inst << "\n"); | |
| // We can delete this call if it takes an inert value. | |
| SmallPtrSet<Value *, 1> VisitedPhis; | |
| if (BundledInsts->contains(Inst)) { | |
| UsedInThisFunction |= 1 << unsigned(Class); | |
| return; | |
| } | |
| if (IsNoopOnGlobal(Class)) | |
| if (isInertARCValue(Inst->getOperand(0), VisitedPhis)) { | |
| if (!Inst->getType()->isVoidTy()) | |
| Inst->replaceAllUsesWith(Inst->getOperand(0)); | |
| Inst->eraseFromParent(); | |
| Changed = true; | |
| return; | |
| } | |
| switch (Class) { | |
| default: | |
| break; | |
| // Delete no-op casts. These function calls have special semantics, but | |
| // the semantics are entirely implemented via lowering in the front-end, | |
| // so by the time they reach the optimizer, they are just no-op calls | |
| // which return their argument. | |
| // | |
| // There are gray areas here, as the ability to cast reference-counted | |
| // pointers to raw void* and back allows code to break ARC assumptions, | |
| // however these are currently considered to be unimportant. | |
| case ARCInstKind::NoopCast: | |
| Changed = true; | |
| ++NumNoops; | |
| LLVM_DEBUG(dbgs() << "Erasing no-op cast: " << *Inst << "\n"); | |
| EraseInstruction(Inst); | |
| return; | |
| // If the pointer-to-weak-pointer is null, it's undefined behavior. | |
| case ARCInstKind::StoreWeak: | |
| case ARCInstKind::LoadWeak: | |
| case ARCInstKind::LoadWeakRetained: | |
| case ARCInstKind::InitWeak: | |
| case ARCInstKind::DestroyWeak: { | |
| CallInst *CI = cast<CallInst>(Inst); | |
| if (IsNullOrUndef(CI->getArgOperand(0))) { | |
| Changed = true; | |
| new StoreInst(ConstantInt::getTrue(CI->getContext()), | |
| UndefValue::get(Type::getInt1PtrTy(CI->getContext())), CI); | |
| Value *NewValue = UndefValue::get(CI->getType()); | |
| LLVM_DEBUG( | |
| dbgs() << "A null pointer-to-weak-pointer is undefined behavior." | |
| "\nOld = " | |
| << *CI << "\nNew = " << *NewValue << "\n"); | |
| CI->replaceAllUsesWith(NewValue); | |
| CI->eraseFromParent(); | |
| return; | |
| } | |
| break; | |
| } | |
| case ARCInstKind::CopyWeak: | |
| case ARCInstKind::MoveWeak: { | |
| CallInst *CI = cast<CallInst>(Inst); | |
| if (IsNullOrUndef(CI->getArgOperand(0)) || | |
| IsNullOrUndef(CI->getArgOperand(1))) { | |
| Changed = true; | |
| new StoreInst(ConstantInt::getTrue(CI->getContext()), | |
| UndefValue::get(Type::getInt1PtrTy(CI->getContext())), CI); | |
| Value *NewValue = UndefValue::get(CI->getType()); | |
| LLVM_DEBUG( | |
| dbgs() << "A null pointer-to-weak-pointer is undefined behavior." | |
| "\nOld = " | |
| << *CI << "\nNew = " << *NewValue << "\n"); | |
| CI->replaceAllUsesWith(NewValue); | |
| CI->eraseFromParent(); | |
| return; | |
| } | |
| break; | |
| } | |
| case ARCInstKind::RetainRV: | |
| if (OptimizeRetainRVCall(F, Inst)) | |
| return; | |
| break; | |
| case ARCInstKind::AutoreleaseRV: | |
| OptimizeAutoreleaseRVCall(F, Inst, Class); | |
| break; | |
| } | |
| // objc_autorelease(x) -> objc_release(x) if x is otherwise unused. | |
| if (IsAutorelease(Class) && Inst->use_empty()) { | |
| CallInst *Call = cast<CallInst>(Inst); | |
| const Value *Arg = Call->getArgOperand(0); | |
| Arg = FindSingleUseIdentifiedObject(Arg); | |
| if (Arg) { | |
| Changed = true; | |
| ++NumAutoreleases; | |
| // Create the declaration lazily. | |
| LLVMContext &C = Inst->getContext(); | |
| Function *Decl = EP.get(ARCRuntimeEntryPointKind::Release); | |
| CallInst *NewCall = | |
| CallInst::Create(Decl, Call->getArgOperand(0), "", Call); | |
| NewCall->setMetadata(MDKindCache.get(ARCMDKindID::ImpreciseRelease), | |
| MDNode::get(C, std::nullopt)); | |
| LLVM_DEBUG(dbgs() << "Replacing autorelease{,RV}(x) with objc_release(x) " | |
| "since x is otherwise unused.\nOld: " | |
| << *Call << "\nNew: " << *NewCall << "\n"); | |
| EraseInstruction(Call); | |
| Inst = NewCall; | |
| Class = ARCInstKind::Release; | |
| } | |
| } | |
| // For functions which can never be passed stack arguments, add | |
| // a tail keyword. | |
| if (IsAlwaysTail(Class) && !cast<CallInst>(Inst)->isNoTailCall()) { | |
| Changed = true; | |
| LLVM_DEBUG( | |
| dbgs() << "Adding tail keyword to function since it can never be " | |
| "passed stack args: " | |
| << *Inst << "\n"); | |
| cast<CallInst>(Inst)->setTailCall(); | |
| } | |
| // Ensure that functions that can never have a "tail" keyword due to the | |
| // semantics of ARC truly do not do so. | |
| if (IsNeverTail(Class)) { | |
| Changed = true; | |
| LLVM_DEBUG(dbgs() << "Removing tail keyword from function: " << *Inst | |
| << "\n"); | |
| cast<CallInst>(Inst)->setTailCall(false); | |
| } | |
| // Set nounwind as needed. | |
| if (IsNoThrow(Class)) { | |
| Changed = true; | |
| LLVM_DEBUG(dbgs() << "Found no throw class. Setting nounwind on: " << *Inst | |
| << "\n"); | |
| cast<CallInst>(Inst)->setDoesNotThrow(); | |
| } | |
| // Note: This catches instructions unrelated to ARC. | |
| if (!IsNoopOnNull(Class)) { | |
| UsedInThisFunction |= 1 << unsigned(Class); | |
| return; | |
| } | |
| // If we haven't already looked up the root, look it up now. | |
| if (!Arg) | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| // ARC calls with null are no-ops. Delete them. | |
| if (IsNullOrUndef(Arg)) { | |
| Changed = true; | |
| ++NumNoops; | |
| LLVM_DEBUG(dbgs() << "ARC calls with null are no-ops. Erasing: " << *Inst | |
| << "\n"); | |
| EraseInstruction(Inst); | |
| return; | |
| } | |
| // Keep track of which of retain, release, autorelease, and retain_block | |
| // are actually present in this function. | |
| UsedInThisFunction |= 1 << unsigned(Class); | |
| // If Arg is a PHI, and one or more incoming values to the | |
| // PHI are null, and the call is control-equivalent to the PHI, and there | |
| // are no relevant side effects between the PHI and the call, and the call | |
| // is not a release that doesn't have the clang.imprecise_release tag, the | |
| // call could be pushed up to just those paths with non-null incoming | |
| // values. For now, don't bother splitting critical edges for this. | |
| if (Class == ARCInstKind::Release && | |
| !Inst->getMetadata(MDKindCache.get(ARCMDKindID::ImpreciseRelease))) | |
| return; | |
| SmallVector<std::pair<Instruction *, const Value *>, 4> Worklist; | |
| Worklist.push_back(std::make_pair(Inst, Arg)); | |
| do { | |
| std::pair<Instruction *, const Value *> Pair = Worklist.pop_back_val(); | |
| Inst = Pair.first; | |
| Arg = Pair.second; | |
| const PHINode *PN = dyn_cast<PHINode>(Arg); | |
| if (!PN) | |
| continue; | |
| // Determine if the PHI has any null operands, or any incoming | |
| // critical edges. | |
| bool HasNull = false; | |
| bool HasCriticalEdges = false; | |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) { | |
| Value *Incoming = GetRCIdentityRoot(PN->getIncomingValue(i)); | |
| if (IsNullOrUndef(Incoming)) | |
| HasNull = true; | |
| else if (PN->getIncomingBlock(i)->getTerminator()->getNumSuccessors() != | |
| 1) { | |
| HasCriticalEdges = true; | |
| break; | |
| } | |
| } | |
| // If we have null operands and no critical edges, optimize. | |
| if (HasCriticalEdges) | |
| continue; | |
| if (!HasNull) | |
| continue; | |
| Instruction *DepInst = nullptr; | |
| // Check that there is nothing that cares about the reference | |
| // count between the call and the phi. | |
| switch (Class) { | |
| case ARCInstKind::Retain: | |
| case ARCInstKind::RetainBlock: | |
| // These can always be moved up. | |
| break; | |
| case ARCInstKind::Release: | |
| // These can't be moved across things that care about the retain | |
| // count. | |
| DepInst = findSingleDependency(NeedsPositiveRetainCount, Arg, | |
| Inst->getParent(), Inst, PA); | |
| break; | |
| case ARCInstKind::Autorelease: | |
| // These can't be moved across autorelease pool scope boundaries. | |
| DepInst = findSingleDependency(AutoreleasePoolBoundary, Arg, | |
| Inst->getParent(), Inst, PA); | |
| break; | |
| case ARCInstKind::UnsafeClaimRV: | |
| case ARCInstKind::RetainRV: | |
| case ARCInstKind::AutoreleaseRV: | |
| // Don't move these; the RV optimization depends on the autoreleaseRV | |
| // being tail called, and the retainRV being immediately after a call | |
| // (which might still happen if we get lucky with codegen layout, but | |
| // it's not worth taking the chance). | |
| continue; | |
| default: | |
| llvm_unreachable("Invalid dependence flavor"); | |
| } | |
| if (DepInst != PN) | |
| continue; | |
| Changed = true; | |
| ++NumPartialNoops; | |
| // Clone the call into each predecessor that has a non-null value. | |
| CallInst *CInst = cast<CallInst>(Inst); | |
| Type *ParamTy = CInst->getArgOperand(0)->getType(); | |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) { | |
| Value *Incoming = GetRCIdentityRoot(PN->getIncomingValue(i)); | |
| if (IsNullOrUndef(Incoming)) | |
| continue; | |
| Value *Op = PN->getIncomingValue(i); | |
| Instruction *InsertPos = &PN->getIncomingBlock(i)->back(); | |
| SmallVector<OperandBundleDef, 1> OpBundles; | |
| cloneOpBundlesIf(CInst, OpBundles, [](const OperandBundleUse &B) { | |
| return B.getTagID() != LLVMContext::OB_funclet; | |
| }); | |
| addOpBundleForFunclet(InsertPos->getParent(), OpBundles); | |
| CallInst *Clone = CallInst::Create(CInst, OpBundles); | |
| if (Op->getType() != ParamTy) | |
| Op = new BitCastInst(Op, ParamTy, "", InsertPos); | |
| Clone->setArgOperand(0, Op); | |
| Clone->insertBefore(InsertPos); | |
| LLVM_DEBUG(dbgs() << "Cloning " << *CInst << "\n" | |
| "And inserting clone at " | |
| << *InsertPos << "\n"); | |
| Worklist.push_back(std::make_pair(Clone, Incoming)); | |
| } | |
| // Erase the original call. | |
| LLVM_DEBUG(dbgs() << "Erasing: " << *CInst << "\n"); | |
| EraseInstruction(CInst); | |
| } while (!Worklist.empty()); | |
| } | |
| /// If we have a top down pointer in the S_Use state, make sure that there are | |
| /// no CFG hazards by checking the states of various bottom up pointers. | |
| static void CheckForUseCFGHazard(const Sequence SuccSSeq, | |
| const bool SuccSRRIKnownSafe, | |
| TopDownPtrState &S, | |
| bool &SomeSuccHasSame, | |
| bool &AllSuccsHaveSame, | |
| bool &NotAllSeqEqualButKnownSafe, | |
| bool &ShouldContinue) { | |
| switch (SuccSSeq) { | |
| case S_CanRelease: { | |
| if (!S.IsKnownSafe() && !SuccSRRIKnownSafe) { | |
| S.ClearSequenceProgress(); | |
| break; | |
| } | |
| S.SetCFGHazardAfflicted(true); | |
| ShouldContinue = true; | |
| break; | |
| } | |
| case S_Use: | |
| SomeSuccHasSame = true; | |
| break; | |
| case S_Stop: | |
| case S_MovableRelease: | |
| if (!S.IsKnownSafe() && !SuccSRRIKnownSafe) | |
| AllSuccsHaveSame = false; | |
| else | |
| NotAllSeqEqualButKnownSafe = true; | |
| break; | |
| case S_Retain: | |
| llvm_unreachable("bottom-up pointer in retain state!"); | |
| case S_None: | |
| llvm_unreachable("This should have been handled earlier."); | |
| } | |
| } | |
| /// If we have a Top Down pointer in the S_CanRelease state, make sure that | |
| /// there are no CFG hazards by checking the states of various bottom up | |
| /// pointers. | |
| static void CheckForCanReleaseCFGHazard(const Sequence SuccSSeq, | |
| const bool SuccSRRIKnownSafe, | |
| TopDownPtrState &S, | |
| bool &SomeSuccHasSame, | |
| bool &AllSuccsHaveSame, | |
| bool &NotAllSeqEqualButKnownSafe) { | |
| switch (SuccSSeq) { | |
| case S_CanRelease: | |
| SomeSuccHasSame = true; | |
| break; | |
| case S_Stop: | |
| case S_MovableRelease: | |
| case S_Use: | |
| if (!S.IsKnownSafe() && !SuccSRRIKnownSafe) | |
| AllSuccsHaveSame = false; | |
| else | |
| NotAllSeqEqualButKnownSafe = true; | |
| break; | |
| case S_Retain: | |
| llvm_unreachable("bottom-up pointer in retain state!"); | |
| case S_None: | |
| llvm_unreachable("This should have been handled earlier."); | |
| } | |
| } | |
| /// Check for critical edges, loop boundaries, irreducible control flow, or | |
| /// other CFG structures where moving code across the edge would result in it | |
| /// being executed more. | |
| void | |
| ObjCARCOpt::CheckForCFGHazards(const BasicBlock *BB, | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BBState &MyStates) const { | |
| // If any top-down local-use or possible-dec has a succ which is earlier in | |
| // the sequence, forget it. | |
| for (auto I = MyStates.top_down_ptr_begin(), E = MyStates.top_down_ptr_end(); | |
| I != E; ++I) { | |
| TopDownPtrState &S = I->second; | |
| const Sequence Seq = I->second.GetSeq(); | |
| // We only care about S_Retain, S_CanRelease, and S_Use. | |
| if (Seq == S_None) | |
| continue; | |
| // Make sure that if extra top down states are added in the future that this | |
| // code is updated to handle it. | |
| assert((Seq == S_Retain || Seq == S_CanRelease || Seq == S_Use) && | |
| "Unknown top down sequence state."); | |
| const Value *Arg = I->first; | |
| bool SomeSuccHasSame = false; | |
| bool AllSuccsHaveSame = true; | |
| bool NotAllSeqEqualButKnownSafe = false; | |
| for (const BasicBlock *Succ : successors(BB)) { | |
| // If VisitBottomUp has pointer information for this successor, take | |
| // what we know about it. | |
| const DenseMap<const BasicBlock *, BBState>::iterator BBI = | |
| BBStates.find(Succ); | |
| assert(BBI != BBStates.end()); | |
| const BottomUpPtrState &SuccS = BBI->second.getPtrBottomUpState(Arg); | |
| const Sequence SuccSSeq = SuccS.GetSeq(); | |
| // If bottom up, the pointer is in an S_None state, clear the sequence | |
| // progress since the sequence in the bottom up state finished | |
| // suggesting a mismatch in between retains/releases. This is true for | |
| // all three cases that we are handling here: S_Retain, S_Use, and | |
| // S_CanRelease. | |
| if (SuccSSeq == S_None) { | |
| S.ClearSequenceProgress(); | |
| continue; | |
| } | |
| // If we have S_Use or S_CanRelease, perform our check for cfg hazard | |
| // checks. | |
| const bool SuccSRRIKnownSafe = SuccS.IsKnownSafe(); | |
| // *NOTE* We do not use Seq from above here since we are allowing for | |
| // S.GetSeq() to change while we are visiting basic blocks. | |
| switch(S.GetSeq()) { | |
| case S_Use: { | |
| bool ShouldContinue = false; | |
| CheckForUseCFGHazard(SuccSSeq, SuccSRRIKnownSafe, S, SomeSuccHasSame, | |
| AllSuccsHaveSame, NotAllSeqEqualButKnownSafe, | |
| ShouldContinue); | |
| if (ShouldContinue) | |
| continue; | |
| break; | |
| } | |
| case S_CanRelease: | |
| CheckForCanReleaseCFGHazard(SuccSSeq, SuccSRRIKnownSafe, S, | |
| SomeSuccHasSame, AllSuccsHaveSame, | |
| NotAllSeqEqualButKnownSafe); | |
| break; | |
| case S_Retain: | |
| case S_None: | |
| case S_Stop: | |
| case S_MovableRelease: | |
| break; | |
| } | |
| } | |
| // If the state at the other end of any of the successor edges | |
| // matches the current state, require all edges to match. This | |
| // guards against loops in the middle of a sequence. | |
| if (SomeSuccHasSame && !AllSuccsHaveSame) { | |
| S.ClearSequenceProgress(); | |
| } else if (NotAllSeqEqualButKnownSafe) { | |
| // If we would have cleared the state foregoing the fact that we are known | |
| // safe, stop code motion. This is because whether or not it is safe to | |
| // remove RR pairs via KnownSafe is an orthogonal concept to whether we | |
| // are allowed to perform code motion. | |
| S.SetCFGHazardAfflicted(true); | |
| } | |
| } | |
| } | |
| bool ObjCARCOpt::VisitInstructionBottomUp( | |
| Instruction *Inst, BasicBlock *BB, BlotMapVector<Value *, RRInfo> &Retains, | |
| BBState &MyStates) { | |
| bool NestingDetected = false; | |
| ARCInstKind Class = GetARCInstKind(Inst); | |
| const Value *Arg = nullptr; | |
| LLVM_DEBUG(dbgs() << " Class: " << Class << "\n"); | |
| switch (Class) { | |
| case ARCInstKind::Release: { | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| BottomUpPtrState &S = MyStates.getPtrBottomUpState(Arg); | |
| NestingDetected |= S.InitBottomUp(MDKindCache, Inst); | |
| break; | |
| } | |
| case ARCInstKind::RetainBlock: | |
| // In OptimizeIndividualCalls, we have strength reduced all optimizable | |
| // objc_retainBlocks to objc_retains. Thus at this point any | |
| // objc_retainBlocks that we see are not optimizable. | |
| break; | |
| case ARCInstKind::Retain: | |
| case ARCInstKind::RetainRV: { | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| BottomUpPtrState &S = MyStates.getPtrBottomUpState(Arg); | |
| if (S.MatchWithRetain()) { | |
| // Don't do retain+release tracking for ARCInstKind::RetainRV, because | |
| // it's better to let it remain as the first instruction after a call. | |
| if (Class != ARCInstKind::RetainRV) { | |
| LLVM_DEBUG(dbgs() << " Matching with: " << *Inst << "\n"); | |
| Retains[Inst] = S.GetRRInfo(); | |
| } | |
| S.ClearSequenceProgress(); | |
| } | |
| // A retain moving bottom up can be a use. | |
| break; | |
| } | |
| case ARCInstKind::AutoreleasepoolPop: | |
| // Conservatively, clear MyStates for all known pointers. | |
| MyStates.clearBottomUpPointers(); | |
| return NestingDetected; | |
| case ARCInstKind::AutoreleasepoolPush: | |
| case ARCInstKind::None: | |
| // These are irrelevant. | |
| return NestingDetected; | |
| default: | |
| break; | |
| } | |
| // Consider any other possible effects of this instruction on each | |
| // pointer being tracked. | |
| for (auto MI = MyStates.bottom_up_ptr_begin(), | |
| ME = MyStates.bottom_up_ptr_end(); | |
| MI != ME; ++MI) { | |
| const Value *Ptr = MI->first; | |
| if (Ptr == Arg) | |
| continue; // Handled above. | |
| BottomUpPtrState &S = MI->second; | |
| if (S.HandlePotentialAlterRefCount(Inst, Ptr, PA, Class)) | |
| continue; | |
| S.HandlePotentialUse(BB, Inst, Ptr, PA, Class); | |
| } | |
| return NestingDetected; | |
| } | |
| bool ObjCARCOpt::VisitBottomUp(BasicBlock *BB, | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains) { | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::VisitBottomUp ==\n"); | |
| bool NestingDetected = false; | |
| BBState &MyStates = BBStates[BB]; | |
| // Merge the states from each successor to compute the initial state | |
| // for the current block. | |
| BBState::edge_iterator SI(MyStates.succ_begin()), | |
| SE(MyStates.succ_end()); | |
| if (SI != SE) { | |
| const BasicBlock *Succ = *SI; | |
| DenseMap<const BasicBlock *, BBState>::iterator I = BBStates.find(Succ); | |
| assert(I != BBStates.end()); | |
| MyStates.InitFromSucc(I->second); | |
| ++SI; | |
| for (; SI != SE; ++SI) { | |
| Succ = *SI; | |
| I = BBStates.find(Succ); | |
| assert(I != BBStates.end()); | |
| MyStates.MergeSucc(I->second); | |
| } | |
| } | |
| LLVM_DEBUG(dbgs() << "Before:\n" | |
| << BBStates[BB] << "\n" | |
| << "Performing Dataflow:\n"); | |
| // Visit all the instructions, bottom-up. | |
| for (BasicBlock::iterator I = BB->end(), E = BB->begin(); I != E; --I) { | |
| Instruction *Inst = &*std::prev(I); | |
| // Invoke instructions are visited as part of their successors (below). | |
| if (isa<InvokeInst>(Inst)) | |
| continue; | |
| LLVM_DEBUG(dbgs() << " Visiting " << *Inst << "\n"); | |
| NestingDetected |= VisitInstructionBottomUp(Inst, BB, Retains, MyStates); | |
| // Bail out if the number of pointers being tracked becomes too large so | |
| // that this pass can complete in a reasonable amount of time. | |
| if (MyStates.bottom_up_ptr_list_size() > MaxPtrStates) { | |
| DisableRetainReleasePairing = true; | |
| return false; | |
| } | |
| } | |
| // If there's a predecessor with an invoke, visit the invoke as if it were | |
| // part of this block, since we can't insert code after an invoke in its own | |
| // block, and we don't want to split critical edges. | |
| for (BBState::edge_iterator PI(MyStates.pred_begin()), | |
| PE(MyStates.pred_end()); PI != PE; ++PI) { | |
| BasicBlock *Pred = *PI; | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(&Pred->back())) | |
| NestingDetected |= VisitInstructionBottomUp(II, BB, Retains, MyStates); | |
| } | |
| LLVM_DEBUG(dbgs() << "\nFinal State:\n" << BBStates[BB] << "\n"); | |
| return NestingDetected; | |
| } | |
| // Fill ReleaseInsertPtToRCIdentityRoots, which is a map from insertion points | |
| // to the set of RC identity roots that would be released by the release calls | |
| // moved to the insertion points. | |
| static void collectReleaseInsertPts( | |
| const BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots) { | |
| for (const auto &P : Retains) { | |
| // Retains is a map from an objc_retain call to a RRInfo of the RC identity | |
| // root of the call. Get the RC identity root of the objc_retain call. | |
| Instruction *Retain = cast<Instruction>(P.first); | |
| Value *Root = GetRCIdentityRoot(Retain->getOperand(0)); | |
| // Collect all the insertion points of the objc_release calls that release | |
| // the RC identity root of the objc_retain call. | |
| for (const Instruction *InsertPt : P.second.ReverseInsertPts) | |
| ReleaseInsertPtToRCIdentityRoots[InsertPt].insert(Root); | |
| } | |
| } | |
| // Get the RC identity roots from an insertion point of an objc_release call. | |
| // Return nullptr if the passed instruction isn't an insertion point. | |
| static const SmallPtrSet<const Value *, 2> * | |
| getRCIdentityRootsFromReleaseInsertPt( | |
| const Instruction *InsertPt, | |
| const DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots) { | |
| auto I = ReleaseInsertPtToRCIdentityRoots.find(InsertPt); | |
| if (I == ReleaseInsertPtToRCIdentityRoots.end()) | |
| return nullptr; | |
| return &I->second; | |
| } | |
| bool ObjCARCOpt::VisitInstructionTopDown( | |
| Instruction *Inst, DenseMap<Value *, RRInfo> &Releases, BBState &MyStates, | |
| const DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots) { | |
| bool NestingDetected = false; | |
| ARCInstKind Class = GetARCInstKind(Inst); | |
| const Value *Arg = nullptr; | |
| // Make sure a call to objc_retain isn't moved past insertion points of calls | |
| // to objc_release. | |
| if (const SmallPtrSet<const Value *, 2> *Roots = | |
| getRCIdentityRootsFromReleaseInsertPt( | |
| Inst, ReleaseInsertPtToRCIdentityRoots)) | |
| for (const auto *Root : *Roots) { | |
| TopDownPtrState &S = MyStates.getPtrTopDownState(Root); | |
| // Disable code motion if the current position is S_Retain to prevent | |
| // moving the objc_retain call past objc_release calls. If it's | |
| // S_CanRelease or larger, it's not necessary to disable code motion as | |
| // the insertion points that prevent the objc_retain call from moving down | |
| // should have been set already. | |
| if (S.GetSeq() == S_Retain) | |
| S.SetCFGHazardAfflicted(true); | |
| } | |
| LLVM_DEBUG(dbgs() << " Class: " << Class << "\n"); | |
| switch (Class) { | |
| case ARCInstKind::RetainBlock: | |
| // In OptimizeIndividualCalls, we have strength reduced all optimizable | |
| // objc_retainBlocks to objc_retains. Thus at this point any | |
| // objc_retainBlocks that we see are not optimizable. We need to break since | |
| // a retain can be a potential use. | |
| break; | |
| case ARCInstKind::Retain: | |
| case ARCInstKind::RetainRV: { | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| TopDownPtrState &S = MyStates.getPtrTopDownState(Arg); | |
| NestingDetected |= S.InitTopDown(Class, Inst); | |
| // A retain can be a potential use; proceed to the generic checking | |
| // code below. | |
| break; | |
| } | |
| case ARCInstKind::Release: { | |
| Arg = GetArgRCIdentityRoot(Inst); | |
| TopDownPtrState &S = MyStates.getPtrTopDownState(Arg); | |
| // Try to form a tentative pair in between this release instruction and the | |
| // top down pointers that we are tracking. | |
| if (S.MatchWithRelease(MDKindCache, Inst)) { | |
| // If we succeed, copy S's RRInfo into the Release -> {Retain Set | |
| // Map}. Then we clear S. | |
| LLVM_DEBUG(dbgs() << " Matching with: " << *Inst << "\n"); | |
| Releases[Inst] = S.GetRRInfo(); | |
| S.ClearSequenceProgress(); | |
| } | |
| break; | |
| } | |
| case ARCInstKind::AutoreleasepoolPop: | |
| // Conservatively, clear MyStates for all known pointers. | |
| MyStates.clearTopDownPointers(); | |
| return false; | |
| case ARCInstKind::AutoreleasepoolPush: | |
| case ARCInstKind::None: | |
| // These can not be uses of | |
| return false; | |
| default: | |
| break; | |
| } | |
| // Consider any other possible effects of this instruction on each | |
| // pointer being tracked. | |
| for (auto MI = MyStates.top_down_ptr_begin(), | |
| ME = MyStates.top_down_ptr_end(); | |
| MI != ME; ++MI) { | |
| const Value *Ptr = MI->first; | |
| if (Ptr == Arg) | |
| continue; // Handled above. | |
| TopDownPtrState &S = MI->second; | |
| if (S.HandlePotentialAlterRefCount(Inst, Ptr, PA, Class, *BundledInsts)) | |
| continue; | |
| S.HandlePotentialUse(Inst, Ptr, PA, Class); | |
| } | |
| return NestingDetected; | |
| } | |
| bool ObjCARCOpt::VisitTopDown( | |
| BasicBlock *BB, DenseMap<const BasicBlock *, BBState> &BBStates, | |
| DenseMap<Value *, RRInfo> &Releases, | |
| const DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| &ReleaseInsertPtToRCIdentityRoots) { | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::VisitTopDown ==\n"); | |
| bool NestingDetected = false; | |
| BBState &MyStates = BBStates[BB]; | |
| // Merge the states from each predecessor to compute the initial state | |
| // for the current block. | |
| BBState::edge_iterator PI(MyStates.pred_begin()), | |
| PE(MyStates.pred_end()); | |
| if (PI != PE) { | |
| const BasicBlock *Pred = *PI; | |
| DenseMap<const BasicBlock *, BBState>::iterator I = BBStates.find(Pred); | |
| assert(I != BBStates.end()); | |
| MyStates.InitFromPred(I->second); | |
| ++PI; | |
| for (; PI != PE; ++PI) { | |
| Pred = *PI; | |
| I = BBStates.find(Pred); | |
| assert(I != BBStates.end()); | |
| MyStates.MergePred(I->second); | |
| } | |
| } | |
| // Check that BB and MyStates have the same number of predecessors. This | |
| // prevents retain calls that live outside a loop from being moved into the | |
| // loop. | |
| if (!BB->hasNPredecessors(MyStates.pred_end() - MyStates.pred_begin())) | |
| for (auto I = MyStates.top_down_ptr_begin(), | |
| E = MyStates.top_down_ptr_end(); | |
| I != E; ++I) | |
| I->second.SetCFGHazardAfflicted(true); | |
| LLVM_DEBUG(dbgs() << "Before:\n" | |
| << BBStates[BB] << "\n" | |
| << "Performing Dataflow:\n"); | |
| // Visit all the instructions, top-down. | |
| for (Instruction &Inst : *BB) { | |
| LLVM_DEBUG(dbgs() << " Visiting " << Inst << "\n"); | |
| NestingDetected |= VisitInstructionTopDown( | |
| &Inst, Releases, MyStates, ReleaseInsertPtToRCIdentityRoots); | |
| // Bail out if the number of pointers being tracked becomes too large so | |
| // that this pass can complete in a reasonable amount of time. | |
| if (MyStates.top_down_ptr_list_size() > MaxPtrStates) { | |
| DisableRetainReleasePairing = true; | |
| return false; | |
| } | |
| } | |
| LLVM_DEBUG(dbgs() << "\nState Before Checking for CFG Hazards:\n" | |
| << BBStates[BB] << "\n\n"); | |
| CheckForCFGHazards(BB, BBStates, MyStates); | |
| LLVM_DEBUG(dbgs() << "Final State:\n" << BBStates[BB] << "\n"); | |
| return NestingDetected; | |
| } | |
| static void | |
| ComputePostOrders(Function &F, | |
| SmallVectorImpl<BasicBlock *> &PostOrder, | |
| SmallVectorImpl<BasicBlock *> &ReverseCFGPostOrder, | |
| unsigned NoObjCARCExceptionsMDKind, | |
| DenseMap<const BasicBlock *, BBState> &BBStates) { | |
| /// The visited set, for doing DFS walks. | |
| SmallPtrSet<BasicBlock *, 16> Visited; | |
| // Do DFS, computing the PostOrder. | |
| SmallPtrSet<BasicBlock *, 16> OnStack; | |
| SmallVector<std::pair<BasicBlock *, succ_iterator>, 16> SuccStack; | |
| // Functions always have exactly one entry block, and we don't have | |
| // any other block that we treat like an entry block. | |
| BasicBlock *EntryBB = &F.getEntryBlock(); | |
| BBState &MyStates = BBStates[EntryBB]; | |
| MyStates.SetAsEntry(); | |
| Instruction *EntryTI = EntryBB->getTerminator(); | |
| SuccStack.push_back(std::make_pair(EntryBB, succ_iterator(EntryTI))); | |
| Visited.insert(EntryBB); | |
| OnStack.insert(EntryBB); | |
| do { | |
| dfs_next_succ: | |
| BasicBlock *CurrBB = SuccStack.back().first; | |
| succ_iterator SE(CurrBB->getTerminator(), false); | |
| while (SuccStack.back().second != SE) { | |
| BasicBlock *SuccBB = *SuccStack.back().second++; | |
| if (Visited.insert(SuccBB).second) { | |
| SuccStack.push_back( | |
| std::make_pair(SuccBB, succ_iterator(SuccBB->getTerminator()))); | |
| BBStates[CurrBB].addSucc(SuccBB); | |
| BBState &SuccStates = BBStates[SuccBB]; | |
| SuccStates.addPred(CurrBB); | |
| OnStack.insert(SuccBB); | |
| goto dfs_next_succ; | |
| } | |
| if (!OnStack.count(SuccBB)) { | |
| BBStates[CurrBB].addSucc(SuccBB); | |
| BBStates[SuccBB].addPred(CurrBB); | |
| } | |
| } | |
| OnStack.erase(CurrBB); | |
| PostOrder.push_back(CurrBB); | |
| SuccStack.pop_back(); | |
| } while (!SuccStack.empty()); | |
| Visited.clear(); | |
| // Do reverse-CFG DFS, computing the reverse-CFG PostOrder. | |
| // Functions may have many exits, and there also blocks which we treat | |
| // as exits due to ignored edges. | |
| SmallVector<std::pair<BasicBlock *, BBState::edge_iterator>, 16> PredStack; | |
| for (BasicBlock &ExitBB : F) { | |
| BBState &MyStates = BBStates[&ExitBB]; | |
| if (!MyStates.isExit()) | |
| continue; | |
| MyStates.SetAsExit(); | |
| PredStack.push_back(std::make_pair(&ExitBB, MyStates.pred_begin())); | |
| Visited.insert(&ExitBB); | |
| while (!PredStack.empty()) { | |
| reverse_dfs_next_succ: | |
| BBState::edge_iterator PE = BBStates[PredStack.back().first].pred_end(); | |
| while (PredStack.back().second != PE) { | |
| BasicBlock *BB = *PredStack.back().second++; | |
| if (Visited.insert(BB).second) { | |
| PredStack.push_back(std::make_pair(BB, BBStates[BB].pred_begin())); | |
| goto reverse_dfs_next_succ; | |
| } | |
| } | |
| ReverseCFGPostOrder.push_back(PredStack.pop_back_val().first); | |
| } | |
| } | |
| } | |
| // Visit the function both top-down and bottom-up. | |
| bool ObjCARCOpt::Visit(Function &F, | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases) { | |
| // Use reverse-postorder traversals, because we magically know that loops | |
| // will be well behaved, i.e. they won't repeatedly call retain on a single | |
| // pointer without doing a release. We can't use the ReversePostOrderTraversal | |
| // class here because we want the reverse-CFG postorder to consider each | |
| // function exit point, and we want to ignore selected cycle edges. | |
| SmallVector<BasicBlock *, 16> PostOrder; | |
| SmallVector<BasicBlock *, 16> ReverseCFGPostOrder; | |
| ComputePostOrders(F, PostOrder, ReverseCFGPostOrder, | |
| MDKindCache.get(ARCMDKindID::NoObjCARCExceptions), | |
| BBStates); | |
| // Use reverse-postorder on the reverse CFG for bottom-up. | |
| bool BottomUpNestingDetected = false; | |
| for (BasicBlock *BB : llvm::reverse(ReverseCFGPostOrder)) { | |
| BottomUpNestingDetected |= VisitBottomUp(BB, BBStates, Retains); | |
| if (DisableRetainReleasePairing) | |
| return false; | |
| } | |
| DenseMap<const Instruction *, SmallPtrSet<const Value *, 2>> | |
| ReleaseInsertPtToRCIdentityRoots; | |
| collectReleaseInsertPts(Retains, ReleaseInsertPtToRCIdentityRoots); | |
| // Use reverse-postorder for top-down. | |
| bool TopDownNestingDetected = false; | |
| for (BasicBlock *BB : llvm::reverse(PostOrder)) { | |
| TopDownNestingDetected |= | |
| VisitTopDown(BB, BBStates, Releases, ReleaseInsertPtToRCIdentityRoots); | |
| if (DisableRetainReleasePairing) | |
| return false; | |
| } | |
| return TopDownNestingDetected && BottomUpNestingDetected; | |
| } | |
| /// Move the calls in RetainsToMove and ReleasesToMove. | |
| void ObjCARCOpt::MoveCalls(Value *Arg, RRInfo &RetainsToMove, | |
| RRInfo &ReleasesToMove, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, | |
| SmallVectorImpl<Instruction *> &DeadInsts, | |
| Module *M) { | |
| Type *ArgTy = Arg->getType(); | |
| Type *ParamTy = PointerType::getUnqual(Type::getInt8Ty(ArgTy->getContext())); | |
| LLVM_DEBUG(dbgs() << "== ObjCARCOpt::MoveCalls ==\n"); | |
| // Insert the new retain and release calls. | |
| for (Instruction *InsertPt : ReleasesToMove.ReverseInsertPts) { | |
| Value *MyArg = ArgTy == ParamTy ? Arg : | |
| new BitCastInst(Arg, ParamTy, "", InsertPt); | |
| Function *Decl = EP.get(ARCRuntimeEntryPointKind::Retain); | |
| SmallVector<OperandBundleDef, 1> BundleList; | |
| addOpBundleForFunclet(InsertPt->getParent(), BundleList); | |
| CallInst *Call = CallInst::Create(Decl, MyArg, BundleList, "", InsertPt); | |
| Call->setDoesNotThrow(); | |
| Call->setTailCall(); | |
| LLVM_DEBUG(dbgs() << "Inserting new Retain: " << *Call | |
| << "\n" | |
| "At insertion point: " | |
| << *InsertPt << "\n"); | |
| } | |
| for (Instruction *InsertPt : RetainsToMove.ReverseInsertPts) { | |
| Value *MyArg = ArgTy == ParamTy ? Arg : | |
| new BitCastInst(Arg, ParamTy, "", InsertPt); | |
| Function *Decl = EP.get(ARCRuntimeEntryPointKind::Release); | |
| SmallVector<OperandBundleDef, 1> BundleList; | |
| addOpBundleForFunclet(InsertPt->getParent(), BundleList); | |
| CallInst *Call = CallInst::Create(Decl, MyArg, BundleList, "", InsertPt); | |
| // Attach a clang.imprecise_release metadata tag, if appropriate. | |
| if (MDNode *M = ReleasesToMove.ReleaseMetadata) | |
| Call->setMetadata(MDKindCache.get(ARCMDKindID::ImpreciseRelease), M); | |
| Call->setDoesNotThrow(); | |
| if (ReleasesToMove.IsTailCallRelease) | |
| Call->setTailCall(); | |
| LLVM_DEBUG(dbgs() << "Inserting new Release: " << *Call | |
| << "\n" | |
| "At insertion point: " | |
| << *InsertPt << "\n"); | |
| } | |
| // Delete the original retain and release calls. | |
| for (Instruction *OrigRetain : RetainsToMove.Calls) { | |
| Retains.blot(OrigRetain); | |
| DeadInsts.push_back(OrigRetain); | |
| LLVM_DEBUG(dbgs() << "Deleting retain: " << *OrigRetain << "\n"); | |
| } | |
| for (Instruction *OrigRelease : ReleasesToMove.Calls) { | |
| Releases.erase(OrigRelease); | |
| DeadInsts.push_back(OrigRelease); | |
| LLVM_DEBUG(dbgs() << "Deleting release: " << *OrigRelease << "\n"); | |
| } | |
| } | |
| bool ObjCARCOpt::PairUpRetainsAndReleases( | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, Module *M, | |
| Instruction *Retain, | |
| SmallVectorImpl<Instruction *> &DeadInsts, RRInfo &RetainsToMove, | |
| RRInfo &ReleasesToMove, Value *Arg, bool KnownSafe, | |
| bool &AnyPairsCompletelyEliminated) { | |
| // If a pair happens in a region where it is known that the reference count | |
| // is already incremented, we can similarly ignore possible decrements unless | |
| // we are dealing with a retainable object with multiple provenance sources. | |
| bool KnownSafeTD = true, KnownSafeBU = true; | |
| bool CFGHazardAfflicted = false; | |
| // Connect the dots between the top-down-collected RetainsToMove and | |
| // bottom-up-collected ReleasesToMove to form sets of related calls. | |
| // This is an iterative process so that we connect multiple releases | |
| // to multiple retains if needed. | |
| unsigned OldDelta = 0; | |
| unsigned NewDelta = 0; | |
| unsigned OldCount = 0; | |
| unsigned NewCount = 0; | |
| bool FirstRelease = true; | |
| for (SmallVector<Instruction *, 4> NewRetains{Retain};;) { | |
| SmallVector<Instruction *, 4> NewReleases; | |
| for (Instruction *NewRetain : NewRetains) { | |
| auto It = Retains.find(NewRetain); | |
| assert(It != Retains.end()); | |
| const RRInfo &NewRetainRRI = It->second; | |
| KnownSafeTD &= NewRetainRRI.KnownSafe; | |
| CFGHazardAfflicted |= NewRetainRRI.CFGHazardAfflicted; | |
| for (Instruction *NewRetainRelease : NewRetainRRI.Calls) { | |
| auto Jt = Releases.find(NewRetainRelease); | |
| if (Jt == Releases.end()) | |
| return false; | |
| const RRInfo &NewRetainReleaseRRI = Jt->second; | |
| // If the release does not have a reference to the retain as well, | |
| // something happened which is unaccounted for. Do not do anything. | |
| // | |
| // This can happen if we catch an additive overflow during path count | |
| // merging. | |
| if (!NewRetainReleaseRRI.Calls.count(NewRetain)) | |
| return false; | |
| if (ReleasesToMove.Calls.insert(NewRetainRelease).second) { | |
| // If we overflow when we compute the path count, don't remove/move | |
| // anything. | |
| const BBState &NRRBBState = BBStates[NewRetainRelease->getParent()]; | |
| unsigned PathCount = BBState::OverflowOccurredValue; | |
| if (NRRBBState.GetAllPathCountWithOverflow(PathCount)) | |
| return false; | |
| assert(PathCount != BBState::OverflowOccurredValue && | |
| "PathCount at this point can not be " | |
| "OverflowOccurredValue."); | |
| OldDelta -= PathCount; | |
| // Merge the ReleaseMetadata and IsTailCallRelease values. | |
| if (FirstRelease) { | |
| ReleasesToMove.ReleaseMetadata = | |
| NewRetainReleaseRRI.ReleaseMetadata; | |
| ReleasesToMove.IsTailCallRelease = | |
| NewRetainReleaseRRI.IsTailCallRelease; | |
| FirstRelease = false; | |
| } else { | |
| if (ReleasesToMove.ReleaseMetadata != | |
| NewRetainReleaseRRI.ReleaseMetadata) | |
| ReleasesToMove.ReleaseMetadata = nullptr; | |
| if (ReleasesToMove.IsTailCallRelease != | |
| NewRetainReleaseRRI.IsTailCallRelease) | |
| ReleasesToMove.IsTailCallRelease = false; | |
| } | |
| // Collect the optimal insertion points. | |
| if (!KnownSafe) | |
| for (Instruction *RIP : NewRetainReleaseRRI.ReverseInsertPts) { | |
| if (ReleasesToMove.ReverseInsertPts.insert(RIP).second) { | |
| // If we overflow when we compute the path count, don't | |
| // remove/move anything. | |
| const BBState &RIPBBState = BBStates[RIP->getParent()]; | |
| PathCount = BBState::OverflowOccurredValue; | |
| if (RIPBBState.GetAllPathCountWithOverflow(PathCount)) | |
| return false; | |
| assert(PathCount != BBState::OverflowOccurredValue && | |
| "PathCount at this point can not be " | |
| "OverflowOccurredValue."); | |
| NewDelta -= PathCount; | |
| } | |
| } | |
| NewReleases.push_back(NewRetainRelease); | |
| } | |
| } | |
| } | |
| NewRetains.clear(); | |
| if (NewReleases.empty()) break; | |
| // Back the other way. | |
| for (Instruction *NewRelease : NewReleases) { | |
| auto It = Releases.find(NewRelease); | |
| assert(It != Releases.end()); | |
| const RRInfo &NewReleaseRRI = It->second; | |
| KnownSafeBU &= NewReleaseRRI.KnownSafe; | |
| CFGHazardAfflicted |= NewReleaseRRI.CFGHazardAfflicted; | |
| for (Instruction *NewReleaseRetain : NewReleaseRRI.Calls) { | |
| auto Jt = Retains.find(NewReleaseRetain); | |
| if (Jt == Retains.end()) | |
| return false; | |
| const RRInfo &NewReleaseRetainRRI = Jt->second; | |
| // If the retain does not have a reference to the release as well, | |
| // something happened which is unaccounted for. Do not do anything. | |
| // | |
| // This can happen if we catch an additive overflow during path count | |
| // merging. | |
| if (!NewReleaseRetainRRI.Calls.count(NewRelease)) | |
| return false; | |
| if (RetainsToMove.Calls.insert(NewReleaseRetain).second) { | |
| // If we overflow when we compute the path count, don't remove/move | |
| // anything. | |
| const BBState &NRRBBState = BBStates[NewReleaseRetain->getParent()]; | |
| unsigned PathCount = BBState::OverflowOccurredValue; | |
| if (NRRBBState.GetAllPathCountWithOverflow(PathCount)) | |
| return false; | |
| assert(PathCount != BBState::OverflowOccurredValue && | |
| "PathCount at this point can not be " | |
| "OverflowOccurredValue."); | |
| OldDelta += PathCount; | |
| OldCount += PathCount; | |
| // Collect the optimal insertion points. | |
| if (!KnownSafe) | |
| for (Instruction *RIP : NewReleaseRetainRRI.ReverseInsertPts) { | |
| if (RetainsToMove.ReverseInsertPts.insert(RIP).second) { | |
| // If we overflow when we compute the path count, don't | |
| // remove/move anything. | |
| const BBState &RIPBBState = BBStates[RIP->getParent()]; | |
| PathCount = BBState::OverflowOccurredValue; | |
| if (RIPBBState.GetAllPathCountWithOverflow(PathCount)) | |
| return false; | |
| assert(PathCount != BBState::OverflowOccurredValue && | |
| "PathCount at this point can not be " | |
| "OverflowOccurredValue."); | |
| NewDelta += PathCount; | |
| NewCount += PathCount; | |
| } | |
| } | |
| NewRetains.push_back(NewReleaseRetain); | |
| } | |
| } | |
| } | |
| if (NewRetains.empty()) break; | |
| } | |
| // We can only remove pointers if we are known safe in both directions. | |
| bool UnconditionallySafe = KnownSafeTD && KnownSafeBU; | |
| if (UnconditionallySafe) { | |
| RetainsToMove.ReverseInsertPts.clear(); | |
| ReleasesToMove.ReverseInsertPts.clear(); | |
| NewCount = 0; | |
| } else { | |
| // Determine whether the new insertion points we computed preserve the | |
| // balance of retain and release calls through the program. | |
| // TODO: If the fully aggressive solution isn't valid, try to find a | |
| // less aggressive solution which is. | |
| if (NewDelta != 0) | |
| return false; | |
| // At this point, we are not going to remove any RR pairs, but we still are | |
| // able to move RR pairs. If one of our pointers is afflicted with | |
| // CFGHazards, we cannot perform such code motion so exit early. | |
| const bool WillPerformCodeMotion = | |
| !RetainsToMove.ReverseInsertPts.empty() || | |
| !ReleasesToMove.ReverseInsertPts.empty(); | |
| if (CFGHazardAfflicted && WillPerformCodeMotion) | |
| return false; | |
| } | |
| // Determine whether the original call points are balanced in the retain and | |
| // release calls through the program. If not, conservatively don't touch | |
| // them. | |
| // TODO: It's theoretically possible to do code motion in this case, as | |
| // long as the existing imbalances are maintained. | |
| if (OldDelta != 0) | |
| return false; | |
| Changed = true; | |
| assert(OldCount != 0 && "Unreachable code?"); | |
| NumRRs += OldCount - NewCount; | |
| // Set to true if we completely removed any RR pairs. | |
| AnyPairsCompletelyEliminated = NewCount == 0; | |
| // We can move calls! | |
| return true; | |
| } | |
| /// Identify pairings between the retains and releases, and delete and/or move | |
| /// them. | |
| bool ObjCARCOpt::PerformCodePlacement( | |
| DenseMap<const BasicBlock *, BBState> &BBStates, | |
| BlotMapVector<Value *, RRInfo> &Retains, | |
| DenseMap<Value *, RRInfo> &Releases, Module *M) { | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::PerformCodePlacement ==\n"); | |
| bool AnyPairsCompletelyEliminated = false; | |
| SmallVector<Instruction *, 8> DeadInsts; | |
| // Visit each retain. | |
| for (BlotMapVector<Value *, RRInfo>::const_iterator I = Retains.begin(), | |
| E = Retains.end(); | |
| I != E; ++I) { | |
| Value *V = I->first; | |
| if (!V) continue; // blotted | |
| Instruction *Retain = cast<Instruction>(V); | |
| LLVM_DEBUG(dbgs() << "Visiting: " << *Retain << "\n"); | |
| Value *Arg = GetArgRCIdentityRoot(Retain); | |
| // If the object being released is in static or stack storage, we know it's | |
| // not being managed by ObjC reference counting, so we can delete pairs | |
| // regardless of what possible decrements or uses lie between them. | |
| bool KnownSafe = isa<Constant>(Arg) || isa<AllocaInst>(Arg); | |
| // A constant pointer can't be pointing to an object on the heap. It may | |
| // be reference-counted, but it won't be deleted. | |
| if (const LoadInst *LI = dyn_cast<LoadInst>(Arg)) | |
| if (const GlobalVariable *GV = | |
| dyn_cast<GlobalVariable>( | |
| GetRCIdentityRoot(LI->getPointerOperand()))) | |
| if (GV->isConstant()) | |
| KnownSafe = true; | |
| // Connect the dots between the top-down-collected RetainsToMove and | |
| // bottom-up-collected ReleasesToMove to form sets of related calls. | |
| RRInfo RetainsToMove, ReleasesToMove; | |
| bool PerformMoveCalls = PairUpRetainsAndReleases( | |
| BBStates, Retains, Releases, M, Retain, DeadInsts, | |
| RetainsToMove, ReleasesToMove, Arg, KnownSafe, | |
| AnyPairsCompletelyEliminated); | |
| if (PerformMoveCalls) { | |
| // Ok, everything checks out and we're all set. Let's move/delete some | |
| // code! | |
| MoveCalls(Arg, RetainsToMove, ReleasesToMove, | |
| Retains, Releases, DeadInsts, M); | |
| } | |
| } | |
| // Now that we're done moving everything, we can delete the newly dead | |
| // instructions, as we no longer need them as insert points. | |
| while (!DeadInsts.empty()) | |
| EraseInstruction(DeadInsts.pop_back_val()); | |
| return AnyPairsCompletelyEliminated; | |
| } | |
| /// Weak pointer optimizations. | |
| void ObjCARCOpt::OptimizeWeakCalls(Function &F) { | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::OptimizeWeakCalls ==\n"); | |
| // First, do memdep-style RLE and S2L optimizations. We can't use memdep | |
| // itself because it uses AliasAnalysis and we need to do provenance | |
| // queries instead. | |
| for (inst_iterator I = inst_begin(&F), E = inst_end(&F); I != E; ) { | |
| Instruction *Inst = &*I++; | |
| LLVM_DEBUG(dbgs() << "Visiting: " << *Inst << "\n"); | |
| ARCInstKind Class = GetBasicARCInstKind(Inst); | |
| if (Class != ARCInstKind::LoadWeak && | |
| Class != ARCInstKind::LoadWeakRetained) | |
| continue; | |
| // Delete objc_loadWeak calls with no users. | |
| if (Class == ARCInstKind::LoadWeak && Inst->use_empty()) { | |
| Inst->eraseFromParent(); | |
| Changed = true; | |
| continue; | |
| } | |
| // TODO: For now, just look for an earlier available version of this value | |
| // within the same block. Theoretically, we could do memdep-style non-local | |
| // analysis too, but that would want caching. A better approach would be to | |
| // use the technique that EarlyCSE uses. | |
| inst_iterator Current = std::prev(I); | |
| BasicBlock *CurrentBB = &*Current.getBasicBlockIterator(); | |
| for (BasicBlock::iterator B = CurrentBB->begin(), | |
| J = Current.getInstructionIterator(); | |
| J != B; --J) { | |
| Instruction *EarlierInst = &*std::prev(J); | |
| ARCInstKind EarlierClass = GetARCInstKind(EarlierInst); | |
| switch (EarlierClass) { | |
| case ARCInstKind::LoadWeak: | |
| case ARCInstKind::LoadWeakRetained: { | |
| // If this is loading from the same pointer, replace this load's value | |
| // with that one. | |
| CallInst *Call = cast<CallInst>(Inst); | |
| CallInst *EarlierCall = cast<CallInst>(EarlierInst); | |
| Value *Arg = Call->getArgOperand(0); | |
| Value *EarlierArg = EarlierCall->getArgOperand(0); | |
| switch (PA.getAA()->alias(Arg, EarlierArg)) { | |
| case AliasResult::MustAlias: | |
| Changed = true; | |
| // If the load has a builtin retain, insert a plain retain for it. | |
| if (Class == ARCInstKind::LoadWeakRetained) { | |
| Function *Decl = EP.get(ARCRuntimeEntryPointKind::Retain); | |
| CallInst *CI = CallInst::Create(Decl, EarlierCall, "", Call); | |
| CI->setTailCall(); | |
| } | |
| // Zap the fully redundant load. | |
| Call->replaceAllUsesWith(EarlierCall); | |
| Call->eraseFromParent(); | |
| goto clobbered; | |
| case AliasResult::MayAlias: | |
| case AliasResult::PartialAlias: | |
| goto clobbered; | |
| case AliasResult::NoAlias: | |
| break; | |
| } | |
| break; | |
| } | |
| case ARCInstKind::StoreWeak: | |
| case ARCInstKind::InitWeak: { | |
| // If this is storing to the same pointer and has the same size etc. | |
| // replace this load's value with the stored value. | |
| CallInst *Call = cast<CallInst>(Inst); | |
| CallInst *EarlierCall = cast<CallInst>(EarlierInst); | |
| Value *Arg = Call->getArgOperand(0); | |
| Value *EarlierArg = EarlierCall->getArgOperand(0); | |
| switch (PA.getAA()->alias(Arg, EarlierArg)) { | |
| case AliasResult::MustAlias: | |
| Changed = true; | |
| // If the load has a builtin retain, insert a plain retain for it. | |
| if (Class == ARCInstKind::LoadWeakRetained) { | |
| Function *Decl = EP.get(ARCRuntimeEntryPointKind::Retain); | |
| CallInst *CI = CallInst::Create(Decl, EarlierCall, "", Call); | |
| CI->setTailCall(); | |
| } | |
| // Zap the fully redundant load. | |
| Call->replaceAllUsesWith(EarlierCall->getArgOperand(1)); | |
| Call->eraseFromParent(); | |
| goto clobbered; | |
| case AliasResult::MayAlias: | |
| case AliasResult::PartialAlias: | |
| goto clobbered; | |
| case AliasResult::NoAlias: | |
| break; | |
| } | |
| break; | |
| } | |
| case ARCInstKind::MoveWeak: | |
| case ARCInstKind::CopyWeak: | |
| // TOOD: Grab the copied value. | |
| goto clobbered; | |
| case ARCInstKind::AutoreleasepoolPush: | |
| case ARCInstKind::None: | |
| case ARCInstKind::IntrinsicUser: | |
| case ARCInstKind::User: | |
| // Weak pointers are only modified through the weak entry points | |
| // (and arbitrary calls, which could call the weak entry points). | |
| break; | |
| default: | |
| // Anything else could modify the weak pointer. | |
| goto clobbered; | |
| } | |
| } | |
| clobbered:; | |
| } | |
| // Then, for each destroyWeak with an alloca operand, check to see if | |
| // the alloca and all its users can be zapped. | |
| for (Instruction &Inst : llvm::make_early_inc_range(instructions(F))) { | |
| ARCInstKind Class = GetBasicARCInstKind(&Inst); | |
| if (Class != ARCInstKind::DestroyWeak) | |
| continue; | |
| CallInst *Call = cast<CallInst>(&Inst); | |
| Value *Arg = Call->getArgOperand(0); | |
| if (AllocaInst *Alloca = dyn_cast<AllocaInst>(Arg)) { | |
| for (User *U : Alloca->users()) { | |
| const Instruction *UserInst = cast<Instruction>(U); | |
| switch (GetBasicARCInstKind(UserInst)) { | |
| case ARCInstKind::InitWeak: | |
| case ARCInstKind::StoreWeak: | |
| case ARCInstKind::DestroyWeak: | |
| continue; | |
| default: | |
| goto done; | |
| } | |
| } | |
| Changed = true; | |
| for (User *U : llvm::make_early_inc_range(Alloca->users())) { | |
| CallInst *UserInst = cast<CallInst>(U); | |
| switch (GetBasicARCInstKind(UserInst)) { | |
| case ARCInstKind::InitWeak: | |
| case ARCInstKind::StoreWeak: | |
| // These functions return their second argument. | |
| UserInst->replaceAllUsesWith(UserInst->getArgOperand(1)); | |
| break; | |
| case ARCInstKind::DestroyWeak: | |
| // No return value. | |
| break; | |
| default: | |
| llvm_unreachable("alloca really is used!"); | |
| } | |
| UserInst->eraseFromParent(); | |
| } | |
| Alloca->eraseFromParent(); | |
| done:; | |
| } | |
| } | |
| } | |
| /// Identify program paths which execute sequences of retains and releases which | |
| /// can be eliminated. | |
| bool ObjCARCOpt::OptimizeSequences(Function &F) { | |
| // Releases, Retains - These are used to store the results of the main flow | |
| // analysis. These use Value* as the key instead of Instruction* so that the | |
| // map stays valid when we get around to rewriting code and calls get | |
| // replaced by arguments. | |
| DenseMap<Value *, RRInfo> Releases; | |
| BlotMapVector<Value *, RRInfo> Retains; | |
| // This is used during the traversal of the function to track the | |
| // states for each identified object at each block. | |
| DenseMap<const BasicBlock *, BBState> BBStates; | |
| // Analyze the CFG of the function, and all instructions. | |
| bool NestingDetected = Visit(F, BBStates, Retains, Releases); | |
| if (DisableRetainReleasePairing) | |
| return false; | |
| // Transform. | |
| bool AnyPairsCompletelyEliminated = PerformCodePlacement(BBStates, Retains, | |
| Releases, | |
| F.getParent()); | |
| return AnyPairsCompletelyEliminated && NestingDetected; | |
| } | |
| /// Check if there is a dependent call earlier that does not have anything in | |
| /// between the Retain and the call that can affect the reference count of their | |
| /// shared pointer argument. Note that Retain need not be in BB. | |
| static CallInst *HasSafePathToPredecessorCall(const Value *Arg, | |
| Instruction *Retain, | |
| ProvenanceAnalysis &PA) { | |
| auto *Call = dyn_cast_or_null<CallInst>(findSingleDependency( | |
| CanChangeRetainCount, Arg, Retain->getParent(), Retain, PA)); | |
| // Check that the pointer is the return value of the call. | |
| if (!Call || Arg != Call) | |
| return nullptr; | |
| // Check that the call is a regular call. | |
| ARCInstKind Class = GetBasicARCInstKind(Call); | |
| return Class == ARCInstKind::CallOrUser || Class == ARCInstKind::Call | |
| ? Call | |
| : nullptr; | |
| } | |
| /// Find a dependent retain that precedes the given autorelease for which there | |
| /// is nothing in between the two instructions that can affect the ref count of | |
| /// Arg. | |
| static CallInst * | |
| FindPredecessorRetainWithSafePath(const Value *Arg, BasicBlock *BB, | |
| Instruction *Autorelease, | |
| ProvenanceAnalysis &PA) { | |
| auto *Retain = dyn_cast_or_null<CallInst>( | |
| findSingleDependency(CanChangeRetainCount, Arg, BB, Autorelease, PA)); | |
| // Check that we found a retain with the same argument. | |
| if (!Retain || !IsRetain(GetBasicARCInstKind(Retain)) || | |
| GetArgRCIdentityRoot(Retain) != Arg) { | |
| return nullptr; | |
| } | |
| return Retain; | |
| } | |
| /// Look for an ``autorelease'' instruction dependent on Arg such that there are | |
| /// no instructions dependent on Arg that need a positive ref count in between | |
| /// the autorelease and the ret. | |
| static CallInst * | |
| FindPredecessorAutoreleaseWithSafePath(const Value *Arg, BasicBlock *BB, | |
| ReturnInst *Ret, | |
| ProvenanceAnalysis &PA) { | |
| SmallPtrSet<Instruction *, 4> DepInsts; | |
| auto *Autorelease = dyn_cast_or_null<CallInst>( | |
| findSingleDependency(NeedsPositiveRetainCount, Arg, BB, Ret, PA)); | |
| if (!Autorelease) | |
| return nullptr; | |
| ARCInstKind AutoreleaseClass = GetBasicARCInstKind(Autorelease); | |
| if (!IsAutorelease(AutoreleaseClass)) | |
| return nullptr; | |
| if (GetArgRCIdentityRoot(Autorelease) != Arg) | |
| return nullptr; | |
| return Autorelease; | |
| } | |
| /// Look for this pattern: | |
| /// \code | |
| /// %call = call i8* @something(...) | |
| /// %2 = call i8* @objc_retain(i8* %call) | |
| /// %3 = call i8* @objc_autorelease(i8* %2) | |
| /// ret i8* %3 | |
| /// \endcode | |
| /// And delete the retain and autorelease. | |
| void ObjCARCOpt::OptimizeReturns(Function &F) { | |
| if (!F.getReturnType()->isPointerTy()) | |
| return; | |
| LLVM_DEBUG(dbgs() << "\n== ObjCARCOpt::OptimizeReturns ==\n"); | |
| for (BasicBlock &BB: F) { | |
| ReturnInst *Ret = dyn_cast<ReturnInst>(&BB.back()); | |
| if (!Ret) | |
| continue; | |
| LLVM_DEBUG(dbgs() << "Visiting: " << *Ret << "\n"); | |
| const Value *Arg = GetRCIdentityRoot(Ret->getOperand(0)); | |
| // Look for an ``autorelease'' instruction that is a predecessor of Ret and | |
| // dependent on Arg such that there are no instructions dependent on Arg | |
| // that need a positive ref count in between the autorelease and Ret. | |
| CallInst *Autorelease = | |
| FindPredecessorAutoreleaseWithSafePath(Arg, &BB, Ret, PA); | |
| if (!Autorelease) | |
| continue; | |
| CallInst *Retain = FindPredecessorRetainWithSafePath( | |
| Arg, Autorelease->getParent(), Autorelease, PA); | |
| if (!Retain) | |
| continue; | |
| // Check that there is nothing that can affect the reference count | |
| // between the retain and the call. Note that Retain need not be in BB. | |
| CallInst *Call = HasSafePathToPredecessorCall(Arg, Retain, PA); | |
| // Don't remove retainRV/autoreleaseRV pairs if the call isn't a tail call. | |
| if (!Call || | |
| (!Call->isTailCall() && | |
| GetBasicARCInstKind(Retain) == ARCInstKind::RetainRV && | |
| GetBasicARCInstKind(Autorelease) == ARCInstKind::AutoreleaseRV)) | |
| continue; | |
| // If so, we can zap the retain and autorelease. | |
| Changed = true; | |
| ++NumRets; | |
| LLVM_DEBUG(dbgs() << "Erasing: " << *Retain << "\nErasing: " << *Autorelease | |
| << "\n"); | |
| BundledInsts->eraseInst(Retain); | |
| EraseInstruction(Autorelease); | |
| } | |
| } | |
| #ifndef NDEBUG | |
| void | |
| ObjCARCOpt::GatherStatistics(Function &F, bool AfterOptimization) { | |
| Statistic &NumRetains = | |
| AfterOptimization ? NumRetainsAfterOpt : NumRetainsBeforeOpt; | |
| Statistic &NumReleases = | |
| AfterOptimization ? NumReleasesAfterOpt : NumReleasesBeforeOpt; | |
| for (inst_iterator I = inst_begin(&F), E = inst_end(&F); I != E; ) { | |
| Instruction *Inst = &*I++; | |
| switch (GetBasicARCInstKind(Inst)) { | |
| default: | |
| break; | |
| case ARCInstKind::Retain: | |
| ++NumRetains; | |
| break; | |
| case ARCInstKind::Release: | |
| ++NumReleases; | |
| break; | |
| } | |
| } | |
| } | |
| #endif | |
| void ObjCARCOpt::init(Function &F) { | |
| if (!EnableARCOpts) | |
| return; | |
| // Intuitively, objc_retain and others are nocapture, however in practice | |
| // they are not, because they return their argument value. And objc_release | |
| // calls finalizers which can have arbitrary side effects. | |
| MDKindCache.init(F.getParent()); | |
| // Initialize our runtime entry point cache. | |
| EP.init(F.getParent()); | |
| // Compute which blocks are in which funclet. | |
| if (F.hasPersonalityFn() && | |
| isScopedEHPersonality(classifyEHPersonality(F.getPersonalityFn()))) | |
| BlockEHColors = colorEHFunclets(F); | |
| } | |
| bool ObjCARCOpt::run(Function &F, AAResults &AA) { | |
| if (!EnableARCOpts) | |
| return false; | |
| Changed = CFGChanged = false; | |
| BundledRetainClaimRVs BRV(/*ContractPass=*/false); | |
| BundledInsts = &BRV; | |
| LLVM_DEBUG(dbgs() << "<<< ObjCARCOpt: Visiting Function: " << F.getName() | |
| << " >>>" | |
| "\n"); | |
| std::pair<bool, bool> R = BundledInsts->insertAfterInvokes(F, nullptr); | |
| Changed |= R.first; | |
| CFGChanged |= R.second; | |
| PA.setAA(&AA); | |
| #ifndef NDEBUG | |
| if (AreStatisticsEnabled()) { | |
| GatherStatistics(F, false); | |
| } | |
| #endif | |
| // This pass performs several distinct transformations. As a compile-time aid | |
| // when compiling code that isn't ObjC, skip these if the relevant ObjC | |
| // library functions aren't declared. | |
| // Preliminary optimizations. This also computes UsedInThisFunction. | |
| OptimizeIndividualCalls(F); | |
| // Optimizations for weak pointers. | |
| if (UsedInThisFunction & ((1 << unsigned(ARCInstKind::LoadWeak)) | | |
| (1 << unsigned(ARCInstKind::LoadWeakRetained)) | | |
| (1 << unsigned(ARCInstKind::StoreWeak)) | | |
| (1 << unsigned(ARCInstKind::InitWeak)) | | |
| (1 << unsigned(ARCInstKind::CopyWeak)) | | |
| (1 << unsigned(ARCInstKind::MoveWeak)) | | |
| (1 << unsigned(ARCInstKind::DestroyWeak)))) | |
| OptimizeWeakCalls(F); | |
| // Optimizations for retain+release pairs. | |
| if (UsedInThisFunction & ((1 << unsigned(ARCInstKind::Retain)) | | |
| (1 << unsigned(ARCInstKind::RetainRV)) | | |
| (1 << unsigned(ARCInstKind::RetainBlock)))) | |
| if (UsedInThisFunction & (1 << unsigned(ARCInstKind::Release))) | |
| // Run OptimizeSequences until it either stops making changes or | |
| // no retain+release pair nesting is detected. | |
| while (OptimizeSequences(F)) {} | |
| // Optimizations if objc_autorelease is used. | |
| if (UsedInThisFunction & ((1 << unsigned(ARCInstKind::Autorelease)) | | |
| (1 << unsigned(ARCInstKind::AutoreleaseRV)))) | |
| OptimizeReturns(F); | |
| // Gather statistics after optimization. | |
| #ifndef NDEBUG | |
| if (AreStatisticsEnabled()) { | |
| GatherStatistics(F, true); | |
| } | |
| #endif | |
| LLVM_DEBUG(dbgs() << "\n"); | |
| return Changed; | |
| } | |
| /// @} | |
| /// | |
| PreservedAnalyses ObjCARCOptPass::run(Function &F, | |
| FunctionAnalysisManager &AM) { | |
| ObjCARCOpt OCAO; | |
| OCAO.init(F); | |
| bool Changed = OCAO.run(F, AM.getResult<AAManager>(F)); | |
| bool CFGChanged = OCAO.hasCFGChanged(); | |
| if (Changed) { | |
| PreservedAnalyses PA; | |
| if (!CFGChanged) | |
| PA.preserveSet<CFGAnalyses>(); | |
| return PA; | |
| } | |
| return PreservedAnalyses::all(); | |
| } |