| //====- X86FlagsCopyLowering.cpp - Lowers COPY nodes of EFLAGS ------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| /// \file | |
| /// | |
| /// Lowers COPY nodes of EFLAGS by directly extracting and preserving individual | |
| /// flag bits. | |
| /// | |
| /// We have to do this by carefully analyzing and rewriting the usage of the | |
| /// copied EFLAGS register because there is no general way to rematerialize the | |
| /// entire EFLAGS register safely and efficiently. Using `popf` both forces | |
| /// dynamic stack adjustment and can create correctness issues due to IF, TF, | |
| /// and other non-status flags being overwritten. Using sequences involving | |
| /// SAHF don't work on all x86 processors and are often quite slow compared to | |
| /// directly testing a single status preserved in its own GPR. | |
| /// | |
| //===----------------------------------------------------------------------===// | |
| #include "X86.h" | |
| #include "X86InstrBuilder.h" | |
| #include "X86InstrInfo.h" | |
| #include "X86Subtarget.h" | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/PostOrderIterator.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/ScopeExit.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/SparseBitVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/CodeGen/MachineBasicBlock.h" | |
| #include "llvm/CodeGen/MachineConstantPool.h" | |
| #include "llvm/CodeGen/MachineDominators.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineFunctionPass.h" | |
| #include "llvm/CodeGen/MachineInstr.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineModuleInfo.h" | |
| #include "llvm/CodeGen/MachineOperand.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/MachineSSAUpdater.h" | |
| #include "llvm/CodeGen/TargetInstrInfo.h" | |
| #include "llvm/CodeGen/TargetRegisterInfo.h" | |
| #include "llvm/CodeGen/TargetSchedule.h" | |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/MC/MCSchedule.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <iterator> | |
| #include <utility> | |
| using namespace llvm; | |
| #define PASS_KEY "x86-flags-copy-lowering" | |
| #define DEBUG_TYPE PASS_KEY | |
| STATISTIC(NumCopiesEliminated, "Number of copies of EFLAGS eliminated"); | |
| STATISTIC(NumSetCCsInserted, "Number of setCC instructions inserted"); | |
| STATISTIC(NumTestsInserted, "Number of test instructions inserted"); | |
| STATISTIC(NumAddsInserted, "Number of adds instructions inserted"); | |
| namespace { | |
| // Convenient array type for storing registers associated with each condition. | |
| using CondRegArray = std::array<unsigned, X86::LAST_VALID_COND + 1>; | |
| class X86FlagsCopyLoweringPass : public MachineFunctionPass { | |
| public: | |
| X86FlagsCopyLoweringPass() : MachineFunctionPass(ID) { } | |
| StringRef getPassName() const override { return "X86 EFLAGS copy lowering"; } | |
| bool runOnMachineFunction(MachineFunction &MF) override; | |
| void getAnalysisUsage(AnalysisUsage &AU) const override; | |
| /// Pass identification, replacement for typeid. | |
| static char ID; | |
| private: | |
| MachineRegisterInfo *MRI = nullptr; | |
| const X86Subtarget *Subtarget = nullptr; | |
| const X86InstrInfo *TII = nullptr; | |
| const TargetRegisterInfo *TRI = nullptr; | |
| const TargetRegisterClass *PromoteRC = nullptr; | |
| MachineDominatorTree *MDT = nullptr; | |
| CondRegArray collectCondsInRegs(MachineBasicBlock &MBB, | |
| MachineBasicBlock::iterator CopyDefI); | |
| Register promoteCondToReg(MachineBasicBlock &MBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, X86::CondCode Cond); | |
| std::pair<unsigned, bool> getCondOrInverseInReg( | |
| MachineBasicBlock &TestMBB, MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, X86::CondCode Cond, CondRegArray &CondRegs); | |
| void insertTest(MachineBasicBlock &MBB, MachineBasicBlock::iterator Pos, | |
| const DebugLoc &Loc, unsigned Reg); | |
| void rewriteArithmetic(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &MI, | |
| MachineOperand &FlagUse, CondRegArray &CondRegs); | |
| void rewriteCMov(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, const DebugLoc &TestLoc, | |
| MachineInstr &CMovI, MachineOperand &FlagUse, | |
| CondRegArray &CondRegs); | |
| void rewriteFCMov(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &CMovI, | |
| MachineOperand &FlagUse, CondRegArray &CondRegs); | |
| void rewriteCondJmp(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &JmpI, | |
| CondRegArray &CondRegs); | |
| void rewriteCopy(MachineInstr &MI, MachineOperand &FlagUse, | |
| MachineInstr &CopyDefI); | |
| void rewriteSetCC(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &SetCCI, | |
| MachineOperand &FlagUse, CondRegArray &CondRegs); | |
| }; | |
| } // end anonymous namespace | |
| INITIALIZE_PASS_BEGIN(X86FlagsCopyLoweringPass, DEBUG_TYPE, | |
| "X86 EFLAGS copy lowering", false, false) | |
| INITIALIZE_PASS_END(X86FlagsCopyLoweringPass, DEBUG_TYPE, | |
| "X86 EFLAGS copy lowering", false, false) | |
| FunctionPass *llvm::createX86FlagsCopyLoweringPass() { | |
| return new X86FlagsCopyLoweringPass(); | |
| } | |
| char X86FlagsCopyLoweringPass::ID = 0; | |
| void X86FlagsCopyLoweringPass::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.addRequired<MachineDominatorTree>(); | |
| MachineFunctionPass::getAnalysisUsage(AU); | |
| } | |
| namespace { | |
| /// An enumeration of the arithmetic instruction mnemonics which have | |
| /// interesting flag semantics. | |
| /// | |
| /// We can map instruction opcodes into these mnemonics to make it easy to | |
| /// dispatch with specific functionality. | |
| enum class FlagArithMnemonic { | |
| ADC, | |
| ADCX, | |
| ADOX, | |
| RCL, | |
| RCR, | |
| SBB, | |
| SETB, | |
| }; | |
| } // namespace | |
| static FlagArithMnemonic getMnemonicFromOpcode(unsigned Opcode) { | |
| switch (Opcode) { | |
| default: | |
| report_fatal_error("No support for lowering a copy into EFLAGS when used " | |
| "by this instruction!"); | |
| #define LLVM_EXPAND_INSTR_SIZES(MNEMONIC, SUFFIX) \ | |
| case X86::MNEMONIC##8##SUFFIX: \ | |
| case X86::MNEMONIC##16##SUFFIX: \ | |
| case X86::MNEMONIC##32##SUFFIX: \ | |
| case X86::MNEMONIC##64##SUFFIX: | |
| #define LLVM_EXPAND_ADC_SBB_INSTR(MNEMONIC) \ | |
| LLVM_EXPAND_INSTR_SIZES(MNEMONIC, rr) \ | |
| LLVM_EXPAND_INSTR_SIZES(MNEMONIC, rr_REV) \ | |
| LLVM_EXPAND_INSTR_SIZES(MNEMONIC, rm) \ | |
| LLVM_EXPAND_INSTR_SIZES(MNEMONIC, mr) \ | |
| case X86::MNEMONIC##8ri: \ | |
| case X86::MNEMONIC##16ri8: \ | |
| case X86::MNEMONIC##32ri8: \ | |
| case X86::MNEMONIC##64ri8: \ | |
| case X86::MNEMONIC##16ri: \ | |
| case X86::MNEMONIC##32ri: \ | |
| case X86::MNEMONIC##64ri32: \ | |
| case X86::MNEMONIC##8mi: \ | |
| case X86::MNEMONIC##16mi8: \ | |
| case X86::MNEMONIC##32mi8: \ | |
| case X86::MNEMONIC##64mi8: \ | |
| case X86::MNEMONIC##16mi: \ | |
| case X86::MNEMONIC##32mi: \ | |
| case X86::MNEMONIC##64mi32: \ | |
| case X86::MNEMONIC##8i8: \ | |
| case X86::MNEMONIC##16i16: \ | |
| case X86::MNEMONIC##32i32: \ | |
| case X86::MNEMONIC##64i32: | |
| LLVM_EXPAND_ADC_SBB_INSTR(ADC) | |
| return FlagArithMnemonic::ADC; | |
| LLVM_EXPAND_ADC_SBB_INSTR(SBB) | |
| return FlagArithMnemonic::SBB; | |
| #undef LLVM_EXPAND_ADC_SBB_INSTR | |
| LLVM_EXPAND_INSTR_SIZES(RCL, rCL) | |
| LLVM_EXPAND_INSTR_SIZES(RCL, r1) | |
| LLVM_EXPAND_INSTR_SIZES(RCL, ri) | |
| return FlagArithMnemonic::RCL; | |
| LLVM_EXPAND_INSTR_SIZES(RCR, rCL) | |
| LLVM_EXPAND_INSTR_SIZES(RCR, r1) | |
| LLVM_EXPAND_INSTR_SIZES(RCR, ri) | |
| return FlagArithMnemonic::RCR; | |
| #undef LLVM_EXPAND_INSTR_SIZES | |
| case X86::ADCX32rr: | |
| case X86::ADCX64rr: | |
| case X86::ADCX32rm: | |
| case X86::ADCX64rm: | |
| return FlagArithMnemonic::ADCX; | |
| case X86::ADOX32rr: | |
| case X86::ADOX64rr: | |
| case X86::ADOX32rm: | |
| case X86::ADOX64rm: | |
| return FlagArithMnemonic::ADOX; | |
| case X86::SETB_C32r: | |
| case X86::SETB_C64r: | |
| return FlagArithMnemonic::SETB; | |
| } | |
| } | |
| static MachineBasicBlock &splitBlock(MachineBasicBlock &MBB, | |
| MachineInstr &SplitI, | |
| const X86InstrInfo &TII) { | |
| MachineFunction &MF = *MBB.getParent(); | |
| assert(SplitI.getParent() == &MBB && | |
| "Split instruction must be in the split block!"); | |
| assert(SplitI.isBranch() && | |
| "Only designed to split a tail of branch instructions!"); | |
| assert(X86::getCondFromBranch(SplitI) != X86::COND_INVALID && | |
| "Must split on an actual jCC instruction!"); | |
| // Dig out the previous instruction to the split point. | |
| MachineInstr &PrevI = *std::prev(SplitI.getIterator()); | |
| assert(PrevI.isBranch() && "Must split after a branch!"); | |
| assert(X86::getCondFromBranch(PrevI) != X86::COND_INVALID && | |
| "Must split after an actual jCC instruction!"); | |
| assert(!std::prev(PrevI.getIterator())->isTerminator() && | |
| "Must only have this one terminator prior to the split!"); | |
| // Grab the one successor edge that will stay in `MBB`. | |
| MachineBasicBlock &UnsplitSucc = *PrevI.getOperand(0).getMBB(); | |
| // Analyze the original block to see if we are actually splitting an edge | |
| // into two edges. This can happen when we have multiple conditional jumps to | |
| // the same successor. | |
| bool IsEdgeSplit = | |
| std::any_of(SplitI.getIterator(), MBB.instr_end(), | |
| [&](MachineInstr &MI) { | |
| assert(MI.isTerminator() && | |
| "Should only have spliced terminators!"); | |
| return llvm::any_of( | |
| MI.operands(), [&](MachineOperand &MOp) { | |
| return MOp.isMBB() && MOp.getMBB() == &UnsplitSucc; | |
| }); | |
| }) || | |
| MBB.getFallThrough() == &UnsplitSucc; | |
| MachineBasicBlock &NewMBB = *MF.CreateMachineBasicBlock(); | |
| // Insert the new block immediately after the current one. Any existing | |
| // fallthrough will be sunk into this new block anyways. | |
| MF.insert(std::next(MachineFunction::iterator(&MBB)), &NewMBB); | |
| // Splice the tail of instructions into the new block. | |
| NewMBB.splice(NewMBB.end(), &MBB, SplitI.getIterator(), MBB.end()); | |
| // Copy the necessary succesors (and their probability info) into the new | |
| // block. | |
| for (auto SI = MBB.succ_begin(), SE = MBB.succ_end(); SI != SE; ++SI) | |
| if (IsEdgeSplit || *SI != &UnsplitSucc) | |
| NewMBB.copySuccessor(&MBB, SI); | |
| // Normalize the probabilities if we didn't end up splitting the edge. | |
| if (!IsEdgeSplit) | |
| NewMBB.normalizeSuccProbs(); | |
| // Now replace all of the moved successors in the original block with the new | |
| // block. This will merge their probabilities. | |
| for (MachineBasicBlock *Succ : NewMBB.successors()) | |
| if (Succ != &UnsplitSucc) | |
| MBB.replaceSuccessor(Succ, &NewMBB); | |
| // We should always end up replacing at least one successor. | |
| assert(MBB.isSuccessor(&NewMBB) && | |
| "Failed to make the new block a successor!"); | |
| // Now update all the PHIs. | |
| for (MachineBasicBlock *Succ : NewMBB.successors()) { | |
| for (MachineInstr &MI : *Succ) { | |
| if (!MI.isPHI()) | |
| break; | |
| for (int OpIdx = 1, NumOps = MI.getNumOperands(); OpIdx < NumOps; | |
| OpIdx += 2) { | |
| MachineOperand &OpV = MI.getOperand(OpIdx); | |
| MachineOperand &OpMBB = MI.getOperand(OpIdx + 1); | |
| assert(OpMBB.isMBB() && "Block operand to a PHI is not a block!"); | |
| if (OpMBB.getMBB() != &MBB) | |
| continue; | |
| // Replace the operand for unsplit successors | |
| if (!IsEdgeSplit || Succ != &UnsplitSucc) { | |
| OpMBB.setMBB(&NewMBB); | |
| // We have to continue scanning as there may be multiple entries in | |
| // the PHI. | |
| continue; | |
| } | |
| // When we have split the edge append a new successor. | |
| MI.addOperand(MF, OpV); | |
| MI.addOperand(MF, MachineOperand::CreateMBB(&NewMBB)); | |
| break; | |
| } | |
| } | |
| } | |
| return NewMBB; | |
| } | |
| static X86::CondCode getCondFromFCMOV(unsigned Opcode) { | |
| switch (Opcode) { | |
| default: return X86::COND_INVALID; | |
| case X86::CMOVBE_Fp32: case X86::CMOVBE_Fp64: case X86::CMOVBE_Fp80: | |
| return X86::COND_BE; | |
| case X86::CMOVB_Fp32: case X86::CMOVB_Fp64: case X86::CMOVB_Fp80: | |
| return X86::COND_B; | |
| case X86::CMOVE_Fp32: case X86::CMOVE_Fp64: case X86::CMOVE_Fp80: | |
| return X86::COND_E; | |
| case X86::CMOVNBE_Fp32: case X86::CMOVNBE_Fp64: case X86::CMOVNBE_Fp80: | |
| return X86::COND_A; | |
| case X86::CMOVNB_Fp32: case X86::CMOVNB_Fp64: case X86::CMOVNB_Fp80: | |
| return X86::COND_AE; | |
| case X86::CMOVNE_Fp32: case X86::CMOVNE_Fp64: case X86::CMOVNE_Fp80: | |
| return X86::COND_NE; | |
| case X86::CMOVNP_Fp32: case X86::CMOVNP_Fp64: case X86::CMOVNP_Fp80: | |
| return X86::COND_NP; | |
| case X86::CMOVP_Fp32: case X86::CMOVP_Fp64: case X86::CMOVP_Fp80: | |
| return X86::COND_P; | |
| } | |
| } | |
| bool X86FlagsCopyLoweringPass::runOnMachineFunction(MachineFunction &MF) { | |
| LLVM_DEBUG(dbgs() << "********** " << getPassName() << " : " << MF.getName() | |
| << " **********\n"); | |
| Subtarget = &MF.getSubtarget<X86Subtarget>(); | |
| MRI = &MF.getRegInfo(); | |
| TII = Subtarget->getInstrInfo(); | |
| TRI = Subtarget->getRegisterInfo(); | |
| MDT = &getAnalysis<MachineDominatorTree>(); | |
| PromoteRC = &X86::GR8RegClass; | |
| if (MF.begin() == MF.end()) | |
| // Nothing to do for a degenerate empty function... | |
| return false; | |
| // Collect the copies in RPO so that when there are chains where a copy is in | |
| // turn copied again we visit the first one first. This ensures we can find | |
| // viable locations for testing the original EFLAGS that dominate all the | |
| // uses across complex CFGs. | |
| SmallVector<MachineInstr *, 4> Copies; | |
| ReversePostOrderTraversal<MachineFunction *> RPOT(&MF); | |
| for (MachineBasicBlock *MBB : RPOT) | |
| for (MachineInstr &MI : *MBB) | |
| if (MI.getOpcode() == TargetOpcode::COPY && | |
| MI.getOperand(0).getReg() == X86::EFLAGS) | |
| Copies.push_back(&MI); | |
| for (MachineInstr *CopyI : Copies) { | |
| MachineBasicBlock &MBB = *CopyI->getParent(); | |
| MachineOperand &VOp = CopyI->getOperand(1); | |
| assert(VOp.isReg() && | |
| "The input to the copy for EFLAGS should always be a register!"); | |
| MachineInstr &CopyDefI = *MRI->getVRegDef(VOp.getReg()); | |
| if (CopyDefI.getOpcode() != TargetOpcode::COPY) { | |
| // FIXME: The big likely candidate here are PHI nodes. We could in theory | |
| // handle PHI nodes, but it gets really, really hard. Insanely hard. Hard | |
| // enough that it is probably better to change every other part of LLVM | |
| // to avoid creating them. The issue is that once we have PHIs we won't | |
| // know which original EFLAGS value we need to capture with our setCCs | |
| // below. The end result will be computing a complete set of setCCs that | |
| // we *might* want, computing them in every place where we copy *out* of | |
| // EFLAGS and then doing SSA formation on all of them to insert necessary | |
| // PHI nodes and consume those here. Then hoping that somehow we DCE the | |
| // unnecessary ones. This DCE seems very unlikely to be successful and so | |
| // we will almost certainly end up with a glut of dead setCC | |
| // instructions. Until we have a motivating test case and fail to avoid | |
| // it by changing other parts of LLVM's lowering, we refuse to handle | |
| // this complex case here. | |
| LLVM_DEBUG( | |
| dbgs() << "ERROR: Encountered unexpected def of an eflags copy: "; | |
| CopyDefI.dump()); | |
| report_fatal_error( | |
| "Cannot lower EFLAGS copy unless it is defined in turn by a copy!"); | |
| } | |
| auto Cleanup = make_scope_exit([&] { | |
| // All uses of the EFLAGS copy are now rewritten, kill the copy into | |
| // eflags and if dead the copy from. | |
| CopyI->eraseFromParent(); | |
| if (MRI->use_empty(CopyDefI.getOperand(0).getReg())) | |
| CopyDefI.eraseFromParent(); | |
| ++NumCopiesEliminated; | |
| }); | |
| MachineOperand &DOp = CopyI->getOperand(0); | |
| assert(DOp.isDef() && "Expected register def!"); | |
| assert(DOp.getReg() == X86::EFLAGS && "Unexpected copy def register!"); | |
| if (DOp.isDead()) | |
| continue; | |
| MachineBasicBlock *TestMBB = CopyDefI.getParent(); | |
| auto TestPos = CopyDefI.getIterator(); | |
| DebugLoc TestLoc = CopyDefI.getDebugLoc(); | |
| LLVM_DEBUG(dbgs() << "Rewriting copy: "; CopyI->dump()); | |
| // Walk up across live-in EFLAGS to find where they were actually def'ed. | |
| // | |
| // This copy's def may just be part of a region of blocks covered by | |
| // a single def of EFLAGS and we want to find the top of that region where | |
| // possible. | |
| // | |
| // This is essentially a search for a *candidate* reaching definition | |
| // location. We don't need to ever find the actual reaching definition here, | |
| // but we want to walk up the dominator tree to find the highest point which | |
| // would be viable for such a definition. | |
| auto HasEFLAGSClobber = [&](MachineBasicBlock::iterator Begin, | |
| MachineBasicBlock::iterator End) { | |
| // Scan backwards as we expect these to be relatively short and often find | |
| // a clobber near the end. | |
| return llvm::any_of( | |
| llvm::reverse(llvm::make_range(Begin, End)), [&](MachineInstr &MI) { | |
| // Flag any instruction (other than the copy we are | |
| // currently rewriting) that defs EFLAGS. | |
| return &MI != CopyI && MI.findRegisterDefOperand(X86::EFLAGS); | |
| }); | |
| }; | |
| auto HasEFLAGSClobberPath = [&](MachineBasicBlock *BeginMBB, | |
| MachineBasicBlock *EndMBB) { | |
| assert(MDT->dominates(BeginMBB, EndMBB) && | |
| "Only support paths down the dominator tree!"); | |
| SmallPtrSet<MachineBasicBlock *, 4> Visited; | |
| SmallVector<MachineBasicBlock *, 4> Worklist; | |
| // We terminate at the beginning. No need to scan it. | |
| Visited.insert(BeginMBB); | |
| Worklist.push_back(EndMBB); | |
| do { | |
| auto *MBB = Worklist.pop_back_val(); | |
| for (auto *PredMBB : MBB->predecessors()) { | |
| if (!Visited.insert(PredMBB).second) | |
| continue; | |
| if (HasEFLAGSClobber(PredMBB->begin(), PredMBB->end())) | |
| return true; | |
| // Enqueue this block to walk its predecessors. | |
| Worklist.push_back(PredMBB); | |
| } | |
| } while (!Worklist.empty()); | |
| // No clobber found along a path from the begin to end. | |
| return false; | |
| }; | |
| while (TestMBB->isLiveIn(X86::EFLAGS) && !TestMBB->pred_empty() && | |
| !HasEFLAGSClobber(TestMBB->begin(), TestPos)) { | |
| // Find the nearest common dominator of the predecessors, as | |
| // that will be the best candidate to hoist into. | |
| MachineBasicBlock *HoistMBB = | |
| std::accumulate(std::next(TestMBB->pred_begin()), TestMBB->pred_end(), | |
| *TestMBB->pred_begin(), | |
| [&](MachineBasicBlock *LHS, MachineBasicBlock *RHS) { | |
| return MDT->findNearestCommonDominator(LHS, RHS); | |
| }); | |
| // Now we need to scan all predecessors that may be reached along paths to | |
| // the hoist block. A clobber anywhere in any of these blocks the hoist. | |
| // Note that this even handles loops because we require *no* clobbers. | |
| if (HasEFLAGSClobberPath(HoistMBB, TestMBB)) | |
| break; | |
| // We also need the terminators to not sneakily clobber flags. | |
| if (HasEFLAGSClobber(HoistMBB->getFirstTerminator()->getIterator(), | |
| HoistMBB->instr_end())) | |
| break; | |
| // We found a viable location, hoist our test position to it. | |
| TestMBB = HoistMBB; | |
| TestPos = TestMBB->getFirstTerminator()->getIterator(); | |
| // Clear the debug location as it would just be confusing after hoisting. | |
| TestLoc = DebugLoc(); | |
| } | |
| LLVM_DEBUG({ | |
| auto DefIt = llvm::find_if( | |
| llvm::reverse(llvm::make_range(TestMBB->instr_begin(), TestPos)), | |
| [&](MachineInstr &MI) { | |
| return MI.findRegisterDefOperand(X86::EFLAGS); | |
| }); | |
| if (DefIt.base() != TestMBB->instr_begin()) { | |
| dbgs() << " Using EFLAGS defined by: "; | |
| DefIt->dump(); | |
| } else { | |
| dbgs() << " Using live-in flags for BB:\n"; | |
| TestMBB->dump(); | |
| } | |
| }); | |
| // While rewriting uses, we buffer jumps and rewrite them in a second pass | |
| // because doing so will perturb the CFG that we are walking to find the | |
| // uses in the first place. | |
| SmallVector<MachineInstr *, 4> JmpIs; | |
| // Gather the condition flags that have already been preserved in | |
| // registers. We do this from scratch each time as we expect there to be | |
| // very few of them and we expect to not revisit the same copy definition | |
| // many times. If either of those change sufficiently we could build a map | |
| // of these up front instead. | |
| CondRegArray CondRegs = collectCondsInRegs(*TestMBB, TestPos); | |
| // Collect the basic blocks we need to scan. Typically this will just be | |
| // a single basic block but we may have to scan multiple blocks if the | |
| // EFLAGS copy lives into successors. | |
| SmallVector<MachineBasicBlock *, 2> Blocks; | |
| SmallPtrSet<MachineBasicBlock *, 2> VisitedBlocks; | |
| Blocks.push_back(&MBB); | |
| do { | |
| MachineBasicBlock &UseMBB = *Blocks.pop_back_val(); | |
| // Track when if/when we find a kill of the flags in this block. | |
| bool FlagsKilled = false; | |
| // In most cases, we walk from the beginning to the end of the block. But | |
| // when the block is the same block as the copy is from, we will visit it | |
| // twice. The first time we start from the copy and go to the end. The | |
| // second time we start from the beginning and go to the copy. This lets | |
| // us handle copies inside of cycles. | |
| // FIXME: This loop is *super* confusing. This is at least in part | |
| // a symptom of all of this routine needing to be refactored into | |
| // documentable components. Once done, there may be a better way to write | |
| // this loop. | |
| for (auto MII = (&UseMBB == &MBB && !VisitedBlocks.count(&UseMBB)) | |
| ? std::next(CopyI->getIterator()) | |
| : UseMBB.instr_begin(), | |
| MIE = UseMBB.instr_end(); | |
| MII != MIE;) { | |
| MachineInstr &MI = *MII++; | |
| // If we are in the original copy block and encounter either the copy | |
| // def or the copy itself, break so that we don't re-process any part of | |
| // the block or process the instructions in the range that was copied | |
| // over. | |
| if (&MI == CopyI || &MI == &CopyDefI) { | |
| assert(&UseMBB == &MBB && VisitedBlocks.count(&MBB) && | |
| "Should only encounter these on the second pass over the " | |
| "original block."); | |
| break; | |
| } | |
| MachineOperand *FlagUse = MI.findRegisterUseOperand(X86::EFLAGS); | |
| if (!FlagUse) { | |
| if (MI.findRegisterDefOperand(X86::EFLAGS)) { | |
| // If EFLAGS are defined, it's as-if they were killed. We can stop | |
| // scanning here. | |
| // | |
| // NB!!! Many instructions only modify some flags. LLVM currently | |
| // models this as clobbering all flags, but if that ever changes | |
| // this will need to be carefully updated to handle that more | |
| // complex logic. | |
| FlagsKilled = true; | |
| break; | |
| } | |
| continue; | |
| } | |
| LLVM_DEBUG(dbgs() << " Rewriting use: "; MI.dump()); | |
| // Check the kill flag before we rewrite as that may change it. | |
| if (FlagUse->isKill()) | |
| FlagsKilled = true; | |
| // Once we encounter a branch, the rest of the instructions must also be | |
| // branches. We can't rewrite in place here, so we handle them below. | |
| // | |
| // Note that we don't have to handle tail calls here, even conditional | |
| // tail calls, as those are not introduced into the X86 MI until post-RA | |
| // branch folding or black placement. As a consequence, we get to deal | |
| // with the simpler formulation of conditional branches followed by tail | |
| // calls. | |
| if (X86::getCondFromBranch(MI) != X86::COND_INVALID) { | |
| auto JmpIt = MI.getIterator(); | |
| do { | |
| JmpIs.push_back(&*JmpIt); | |
| ++JmpIt; | |
| } while (JmpIt != UseMBB.instr_end() && | |
| X86::getCondFromBranch(*JmpIt) != | |
| X86::COND_INVALID); | |
| break; | |
| } | |
| // Otherwise we can just rewrite in-place. | |
| if (X86::getCondFromCMov(MI) != X86::COND_INVALID) { | |
| rewriteCMov(*TestMBB, TestPos, TestLoc, MI, *FlagUse, CondRegs); | |
| } else if (getCondFromFCMOV(MI.getOpcode()) != X86::COND_INVALID) { | |
| rewriteFCMov(*TestMBB, TestPos, TestLoc, MI, *FlagUse, CondRegs); | |
| } else if (X86::getCondFromSETCC(MI) != X86::COND_INVALID) { | |
| rewriteSetCC(*TestMBB, TestPos, TestLoc, MI, *FlagUse, CondRegs); | |
| } else if (MI.getOpcode() == TargetOpcode::COPY) { | |
| rewriteCopy(MI, *FlagUse, CopyDefI); | |
| } else { | |
| // We assume all other instructions that use flags also def them. | |
| assert(MI.findRegisterDefOperand(X86::EFLAGS) && | |
| "Expected a def of EFLAGS for this instruction!"); | |
| // NB!!! Several arithmetic instructions only *partially* update | |
| // flags. Theoretically, we could generate MI code sequences that | |
| // would rely on this fact and observe different flags independently. | |
| // But currently LLVM models all of these instructions as clobbering | |
| // all the flags in an undef way. We rely on that to simplify the | |
| // logic. | |
| FlagsKilled = true; | |
| // Generically handle remaining uses as arithmetic instructions. | |
| rewriteArithmetic(*TestMBB, TestPos, TestLoc, MI, *FlagUse, | |
| CondRegs); | |
| } | |
| // If this was the last use of the flags, we're done. | |
| if (FlagsKilled) | |
| break; | |
| } | |
| // If the flags were killed, we're done with this block. | |
| if (FlagsKilled) | |
| continue; | |
| // Otherwise we need to scan successors for ones where the flags live-in | |
| // and queue those up for processing. | |
| for (MachineBasicBlock *SuccMBB : UseMBB.successors()) | |
| if (SuccMBB->isLiveIn(X86::EFLAGS) && | |
| VisitedBlocks.insert(SuccMBB).second) { | |
| // We currently don't do any PHI insertion and so we require that the | |
| // test basic block dominates all of the use basic blocks. Further, we | |
| // can't have a cycle from the test block back to itself as that would | |
| // create a cycle requiring a PHI to break it. | |
| // | |
| // We could in theory do PHI insertion here if it becomes useful by | |
| // just taking undef values in along every edge that we don't trace | |
| // this EFLAGS copy along. This isn't as bad as fully general PHI | |
| // insertion, but still seems like a great deal of complexity. | |
| // | |
| // Because it is theoretically possible that some earlier MI pass or | |
| // other lowering transformation could induce this to happen, we do | |
| // a hard check even in non-debug builds here. | |
| if (SuccMBB == TestMBB || !MDT->dominates(TestMBB, SuccMBB)) { | |
| LLVM_DEBUG({ | |
| dbgs() | |
| << "ERROR: Encountered use that is not dominated by our test " | |
| "basic block! Rewriting this would require inserting PHI " | |
| "nodes to track the flag state across the CFG.\n\nTest " | |
| "block:\n"; | |
| TestMBB->dump(); | |
| dbgs() << "Use block:\n"; | |
| SuccMBB->dump(); | |
| }); | |
| report_fatal_error( | |
| "Cannot lower EFLAGS copy when original copy def " | |
| "does not dominate all uses."); | |
| } | |
| Blocks.push_back(SuccMBB); | |
| // After this, EFLAGS will be recreated before each use. | |
| SuccMBB->removeLiveIn(X86::EFLAGS); | |
| } | |
| } while (!Blocks.empty()); | |
| // Now rewrite the jumps that use the flags. These we handle specially | |
| // because if there are multiple jumps in a single basic block we'll have | |
| // to do surgery on the CFG. | |
| MachineBasicBlock *LastJmpMBB = nullptr; | |
| for (MachineInstr *JmpI : JmpIs) { | |
| // Past the first jump within a basic block we need to split the blocks | |
| // apart. | |
| if (JmpI->getParent() == LastJmpMBB) | |
| splitBlock(*JmpI->getParent(), *JmpI, *TII); | |
| else | |
| LastJmpMBB = JmpI->getParent(); | |
| rewriteCondJmp(*TestMBB, TestPos, TestLoc, *JmpI, CondRegs); | |
| } | |
| // FIXME: Mark the last use of EFLAGS before the copy's def as a kill if | |
| // the copy's def operand is itself a kill. | |
| } | |
| #ifndef NDEBUG | |
| for (MachineBasicBlock &MBB : MF) | |
| for (MachineInstr &MI : MBB) | |
| if (MI.getOpcode() == TargetOpcode::COPY && | |
| (MI.getOperand(0).getReg() == X86::EFLAGS || | |
| MI.getOperand(1).getReg() == X86::EFLAGS)) { | |
| LLVM_DEBUG(dbgs() << "ERROR: Found a COPY involving EFLAGS: "; | |
| MI.dump()); | |
| llvm_unreachable("Unlowered EFLAGS copy!"); | |
| } | |
| #endif | |
| return true; | |
| } | |
| /// Collect any conditions that have already been set in registers so that we | |
| /// can re-use them rather than adding duplicates. | |
| CondRegArray X86FlagsCopyLoweringPass::collectCondsInRegs( | |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator TestPos) { | |
| CondRegArray CondRegs = {}; | |
| // Scan backwards across the range of instructions with live EFLAGS. | |
| for (MachineInstr &MI : | |
| llvm::reverse(llvm::make_range(MBB.begin(), TestPos))) { | |
| X86::CondCode Cond = X86::getCondFromSETCC(MI); | |
| if (Cond != X86::COND_INVALID && !MI.mayStore() && | |
| MI.getOperand(0).isReg() && MI.getOperand(0).getReg().isVirtual()) { | |
| assert(MI.getOperand(0).isDef() && | |
| "A non-storing SETcc should always define a register!"); | |
| CondRegs[Cond] = MI.getOperand(0).getReg(); | |
| } | |
| // Stop scanning when we see the first definition of the EFLAGS as prior to | |
| // this we would potentially capture the wrong flag state. | |
| if (MI.findRegisterDefOperand(X86::EFLAGS)) | |
| break; | |
| } | |
| return CondRegs; | |
| } | |
| Register X86FlagsCopyLoweringPass::promoteCondToReg( | |
| MachineBasicBlock &TestMBB, MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, X86::CondCode Cond) { | |
| Register Reg = MRI->createVirtualRegister(PromoteRC); | |
| auto SetI = BuildMI(TestMBB, TestPos, TestLoc, | |
| TII->get(X86::SETCCr), Reg).addImm(Cond); | |
| (void)SetI; | |
| LLVM_DEBUG(dbgs() << " save cond: "; SetI->dump()); | |
| ++NumSetCCsInserted; | |
| return Reg; | |
| } | |
| std::pair<unsigned, bool> X86FlagsCopyLoweringPass::getCondOrInverseInReg( | |
| MachineBasicBlock &TestMBB, MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, X86::CondCode Cond, CondRegArray &CondRegs) { | |
| unsigned &CondReg = CondRegs[Cond]; | |
| unsigned &InvCondReg = CondRegs[X86::GetOppositeBranchCondition(Cond)]; | |
| if (!CondReg && !InvCondReg) | |
| CondReg = promoteCondToReg(TestMBB, TestPos, TestLoc, Cond); | |
| if (CondReg) | |
| return {CondReg, false}; | |
| else | |
| return {InvCondReg, true}; | |
| } | |
| void X86FlagsCopyLoweringPass::insertTest(MachineBasicBlock &MBB, | |
| MachineBasicBlock::iterator Pos, | |
| const DebugLoc &Loc, unsigned Reg) { | |
| auto TestI = | |
| BuildMI(MBB, Pos, Loc, TII->get(X86::TEST8rr)).addReg(Reg).addReg(Reg); | |
| (void)TestI; | |
| LLVM_DEBUG(dbgs() << " test cond: "; TestI->dump()); | |
| ++NumTestsInserted; | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteArithmetic( | |
| MachineBasicBlock &TestMBB, MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &MI, MachineOperand &FlagUse, | |
| CondRegArray &CondRegs) { | |
| // Arithmetic is either reading CF or OF. Figure out which condition we need | |
| // to preserve in a register. | |
| X86::CondCode Cond = X86::COND_INVALID; | |
| // The addend to use to reset CF or OF when added to the flag value. | |
| int Addend = 0; | |
| switch (getMnemonicFromOpcode(MI.getOpcode())) { | |
| case FlagArithMnemonic::ADC: | |
| case FlagArithMnemonic::ADCX: | |
| case FlagArithMnemonic::RCL: | |
| case FlagArithMnemonic::RCR: | |
| case FlagArithMnemonic::SBB: | |
| case FlagArithMnemonic::SETB: | |
| Cond = X86::COND_B; // CF == 1 | |
| // Set up an addend that when one is added will need a carry due to not | |
| // having a higher bit available. | |
| Addend = 255; | |
| break; | |
| case FlagArithMnemonic::ADOX: | |
| Cond = X86::COND_O; // OF == 1 | |
| // Set up an addend that when one is added will turn from positive to | |
| // negative and thus overflow in the signed domain. | |
| Addend = 127; | |
| break; | |
| } | |
| // Now get a register that contains the value of the flag input to the | |
| // arithmetic. We require exactly this flag to simplify the arithmetic | |
| // required to materialize it back into the flag. | |
| unsigned &CondReg = CondRegs[Cond]; | |
| if (!CondReg) | |
| CondReg = promoteCondToReg(TestMBB, TestPos, TestLoc, Cond); | |
| MachineBasicBlock &MBB = *MI.getParent(); | |
| // Insert an instruction that will set the flag back to the desired value. | |
| Register TmpReg = MRI->createVirtualRegister(PromoteRC); | |
| auto AddI = | |
| BuildMI(MBB, MI.getIterator(), MI.getDebugLoc(), TII->get(X86::ADD8ri)) | |
| .addDef(TmpReg, RegState::Dead) | |
| .addReg(CondReg) | |
| .addImm(Addend); | |
| (void)AddI; | |
| LLVM_DEBUG(dbgs() << " add cond: "; AddI->dump()); | |
| ++NumAddsInserted; | |
| FlagUse.setIsKill(true); | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteCMov(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, | |
| MachineInstr &CMovI, | |
| MachineOperand &FlagUse, | |
| CondRegArray &CondRegs) { | |
| // First get the register containing this specific condition. | |
| X86::CondCode Cond = X86::getCondFromCMov(CMovI); | |
| unsigned CondReg; | |
| bool Inverted; | |
| std::tie(CondReg, Inverted) = | |
| getCondOrInverseInReg(TestMBB, TestPos, TestLoc, Cond, CondRegs); | |
| MachineBasicBlock &MBB = *CMovI.getParent(); | |
| // Insert a direct test of the saved register. | |
| insertTest(MBB, CMovI.getIterator(), CMovI.getDebugLoc(), CondReg); | |
| // Rewrite the CMov to use the !ZF flag from the test, and then kill its use | |
| // of the flags afterward. | |
| CMovI.getOperand(CMovI.getDesc().getNumOperands() - 1) | |
| .setImm(Inverted ? X86::COND_E : X86::COND_NE); | |
| FlagUse.setIsKill(true); | |
| LLVM_DEBUG(dbgs() << " fixed cmov: "; CMovI.dump()); | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteFCMov(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, | |
| MachineInstr &CMovI, | |
| MachineOperand &FlagUse, | |
| CondRegArray &CondRegs) { | |
| // First get the register containing this specific condition. | |
| X86::CondCode Cond = getCondFromFCMOV(CMovI.getOpcode()); | |
| unsigned CondReg; | |
| bool Inverted; | |
| std::tie(CondReg, Inverted) = | |
| getCondOrInverseInReg(TestMBB, TestPos, TestLoc, Cond, CondRegs); | |
| MachineBasicBlock &MBB = *CMovI.getParent(); | |
| // Insert a direct test of the saved register. | |
| insertTest(MBB, CMovI.getIterator(), CMovI.getDebugLoc(), CondReg); | |
| auto getFCMOVOpcode = [](unsigned Opcode, bool Inverted) { | |
| switch (Opcode) { | |
| default: llvm_unreachable("Unexpected opcode!"); | |
| case X86::CMOVBE_Fp32: case X86::CMOVNBE_Fp32: | |
| case X86::CMOVB_Fp32: case X86::CMOVNB_Fp32: | |
| case X86::CMOVE_Fp32: case X86::CMOVNE_Fp32: | |
| case X86::CMOVP_Fp32: case X86::CMOVNP_Fp32: | |
| return Inverted ? X86::CMOVE_Fp32 : X86::CMOVNE_Fp32; | |
| case X86::CMOVBE_Fp64: case X86::CMOVNBE_Fp64: | |
| case X86::CMOVB_Fp64: case X86::CMOVNB_Fp64: | |
| case X86::CMOVE_Fp64: case X86::CMOVNE_Fp64: | |
| case X86::CMOVP_Fp64: case X86::CMOVNP_Fp64: | |
| return Inverted ? X86::CMOVE_Fp64 : X86::CMOVNE_Fp64; | |
| case X86::CMOVBE_Fp80: case X86::CMOVNBE_Fp80: | |
| case X86::CMOVB_Fp80: case X86::CMOVNB_Fp80: | |
| case X86::CMOVE_Fp80: case X86::CMOVNE_Fp80: | |
| case X86::CMOVP_Fp80: case X86::CMOVNP_Fp80: | |
| return Inverted ? X86::CMOVE_Fp80 : X86::CMOVNE_Fp80; | |
| } | |
| }; | |
| // Rewrite the CMov to use the !ZF flag from the test. | |
| CMovI.setDesc(TII->get(getFCMOVOpcode(CMovI.getOpcode(), Inverted))); | |
| FlagUse.setIsKill(true); | |
| LLVM_DEBUG(dbgs() << " fixed fcmov: "; CMovI.dump()); | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteCondJmp( | |
| MachineBasicBlock &TestMBB, MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, MachineInstr &JmpI, CondRegArray &CondRegs) { | |
| // First get the register containing this specific condition. | |
| X86::CondCode Cond = X86::getCondFromBranch(JmpI); | |
| unsigned CondReg; | |
| bool Inverted; | |
| std::tie(CondReg, Inverted) = | |
| getCondOrInverseInReg(TestMBB, TestPos, TestLoc, Cond, CondRegs); | |
| MachineBasicBlock &JmpMBB = *JmpI.getParent(); | |
| // Insert a direct test of the saved register. | |
| insertTest(JmpMBB, JmpI.getIterator(), JmpI.getDebugLoc(), CondReg); | |
| // Rewrite the jump to use the !ZF flag from the test, and kill its use of | |
| // flags afterward. | |
| JmpI.getOperand(1).setImm(Inverted ? X86::COND_E : X86::COND_NE); | |
| JmpI.findRegisterUseOperand(X86::EFLAGS)->setIsKill(true); | |
| LLVM_DEBUG(dbgs() << " fixed jCC: "; JmpI.dump()); | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteCopy(MachineInstr &MI, | |
| MachineOperand &FlagUse, | |
| MachineInstr &CopyDefI) { | |
| // Just replace this copy with the original copy def. | |
| MRI->replaceRegWith(MI.getOperand(0).getReg(), | |
| CopyDefI.getOperand(0).getReg()); | |
| MI.eraseFromParent(); | |
| } | |
| void X86FlagsCopyLoweringPass::rewriteSetCC(MachineBasicBlock &TestMBB, | |
| MachineBasicBlock::iterator TestPos, | |
| const DebugLoc &TestLoc, | |
| MachineInstr &SetCCI, | |
| MachineOperand &FlagUse, | |
| CondRegArray &CondRegs) { | |
| X86::CondCode Cond = X86::getCondFromSETCC(SetCCI); | |
| // Note that we can't usefully rewrite this to the inverse without complex | |
| // analysis of the users of the setCC. Largely we rely on duplicates which | |
| // could have been avoided already being avoided here. | |
| unsigned &CondReg = CondRegs[Cond]; | |
| if (!CondReg) | |
| CondReg = promoteCondToReg(TestMBB, TestPos, TestLoc, Cond); | |
| // Rewriting a register def is trivial: we just replace the register and | |
| // remove the setcc. | |
| if (!SetCCI.mayStore()) { | |
| assert(SetCCI.getOperand(0).isReg() && | |
| "Cannot have a non-register defined operand to SETcc!"); | |
| Register OldReg = SetCCI.getOperand(0).getReg(); | |
| // Drop Kill flags on the old register before replacing. CondReg may have | |
| // a longer live range. | |
| MRI->clearKillFlags(OldReg); | |
| MRI->replaceRegWith(OldReg, CondReg); | |
| SetCCI.eraseFromParent(); | |
| return; | |
| } | |
| // Otherwise, we need to emit a store. | |
| auto MIB = BuildMI(*SetCCI.getParent(), SetCCI.getIterator(), | |
| SetCCI.getDebugLoc(), TII->get(X86::MOV8mr)); | |
| // Copy the address operands. | |
| for (int i = 0; i < X86::AddrNumOperands; ++i) | |
| MIB.add(SetCCI.getOperand(i)); | |
| MIB.addReg(CondReg); | |
| MIB.setMemRefs(SetCCI.memoperands()); | |
| SetCCI.eraseFromParent(); | |
| } |