| //===-------------- PPCMIPeephole.cpp - MI Peephole Cleanups -------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===---------------------------------------------------------------------===// | |
| // | |
| // This pass performs peephole optimizations to clean up ugly code | |
| // sequences at the MachineInstruction layer. It runs at the end of | |
| // the SSA phases, following VSX swap removal. A pass of dead code | |
| // elimination follows this one for quick clean-up of any dead | |
| // instructions introduced here. Although we could do this as callbacks | |
| // from the generic peephole pass, this would have a couple of bad | |
| // effects: it might remove optimization opportunities for VSX swap | |
| // removal, and it would miss cleanups made possible following VSX | |
| // swap removal. | |
| // | |
| //===---------------------------------------------------------------------===// | |
| #include "MCTargetDesc/PPCMCTargetDesc.h" | |
| #include "MCTargetDesc/PPCPredicates.h" | |
| #include "PPC.h" | |
| #include "PPCInstrBuilder.h" | |
| #include "PPCInstrInfo.h" | |
| #include "PPCMachineFunctionInfo.h" | |
| #include "PPCTargetMachine.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/CodeGen/MachineBlockFrequencyInfo.h" | |
| #include "llvm/CodeGen/MachineDominators.h" | |
| #include "llvm/CodeGen/MachineFrameInfo.h" | |
| #include "llvm/CodeGen/MachineFunctionPass.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachinePostDominators.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Support/Debug.h" | |
| using namespace llvm; | |
| #define DEBUG_TYPE "ppc-mi-peepholes" | |
| STATISTIC(RemoveTOCSave, "Number of TOC saves removed"); | |
| STATISTIC(MultiTOCSaves, | |
| "Number of functions with multiple TOC saves that must be kept"); | |
| STATISTIC(NumTOCSavesInPrologue, "Number of TOC saves placed in the prologue"); | |
| STATISTIC(NumEliminatedSExt, "Number of eliminated sign-extensions"); | |
| STATISTIC(NumEliminatedZExt, "Number of eliminated zero-extensions"); | |
| STATISTIC(NumOptADDLIs, "Number of optimized ADD instruction fed by LI"); | |
| STATISTIC(NumConvertedToImmediateForm, | |
| "Number of instructions converted to their immediate form"); | |
| STATISTIC(NumFunctionsEnteredInMIPeephole, | |
| "Number of functions entered in PPC MI Peepholes"); | |
| STATISTIC(NumFixedPointIterations, | |
| "Number of fixed-point iterations converting reg-reg instructions " | |
| "to reg-imm ones"); | |
| STATISTIC(NumRotatesCollapsed, | |
| "Number of pairs of rotate left, clear left/right collapsed"); | |
| STATISTIC(NumEXTSWAndSLDICombined, | |
| "Number of pairs of EXTSW and SLDI combined as EXTSWSLI"); | |
| STATISTIC(NumLoadImmZeroFoldedAndRemoved, | |
| "Number of LI(8) reg, 0 that are folded to r0 and removed"); | |
| static cl::opt<bool> | |
| FixedPointRegToImm("ppc-reg-to-imm-fixed-point", cl::Hidden, cl::init(true), | |
| cl::desc("Iterate to a fixed point when attempting to " | |
| "convert reg-reg instructions to reg-imm")); | |
| static cl::opt<bool> | |
| ConvertRegReg("ppc-convert-rr-to-ri", cl::Hidden, cl::init(true), | |
| cl::desc("Convert eligible reg+reg instructions to reg+imm")); | |
| static cl::opt<bool> | |
| EnableSExtElimination("ppc-eliminate-signext", | |
| cl::desc("enable elimination of sign-extensions"), | |
| cl::init(true), cl::Hidden); | |
| static cl::opt<bool> | |
| EnableZExtElimination("ppc-eliminate-zeroext", | |
| cl::desc("enable elimination of zero-extensions"), | |
| cl::init(true), cl::Hidden); | |
| static cl::opt<bool> | |
| EnableTrapOptimization("ppc-opt-conditional-trap", | |
| cl::desc("enable optimization of conditional traps"), | |
| cl::init(false), cl::Hidden); | |
| namespace { | |
| struct PPCMIPeephole : public MachineFunctionPass { | |
| static char ID; | |
| const PPCInstrInfo *TII; | |
| MachineFunction *MF; | |
| MachineRegisterInfo *MRI; | |
| PPCMIPeephole() : MachineFunctionPass(ID) { | |
| initializePPCMIPeepholePass(*PassRegistry::getPassRegistry()); | |
| } | |
| private: | |
| MachineDominatorTree *MDT; | |
| MachinePostDominatorTree *MPDT; | |
| MachineBlockFrequencyInfo *MBFI; | |
| uint64_t EntryFreq; | |
| // Initialize class variables. | |
| void initialize(MachineFunction &MFParm); | |
| // Perform peepholes. | |
| bool simplifyCode(); | |
| // Perform peepholes. | |
| bool eliminateRedundantCompare(); | |
| bool eliminateRedundantTOCSaves(std::map<MachineInstr *, bool> &TOCSaves); | |
| bool combineSEXTAndSHL(MachineInstr &MI, MachineInstr *&ToErase); | |
| bool emitRLDICWhenLoweringJumpTables(MachineInstr &MI); | |
| void UpdateTOCSaves(std::map<MachineInstr *, bool> &TOCSaves, | |
| MachineInstr *MI); | |
| public: | |
| void getAnalysisUsage(AnalysisUsage &AU) const override { | |
| AU.addRequired<MachineDominatorTree>(); | |
| AU.addRequired<MachinePostDominatorTree>(); | |
| AU.addRequired<MachineBlockFrequencyInfo>(); | |
| AU.addPreserved<MachineDominatorTree>(); | |
| AU.addPreserved<MachinePostDominatorTree>(); | |
| AU.addPreserved<MachineBlockFrequencyInfo>(); | |
| MachineFunctionPass::getAnalysisUsage(AU); | |
| } | |
| // Main entry point for this pass. | |
| bool runOnMachineFunction(MachineFunction &MF) override { | |
| initialize(MF); | |
| // At this point, TOC pointer should not be used in a function that uses | |
| // PC-Relative addressing. | |
| assert((MF.getRegInfo().use_empty(PPC::X2) || | |
| !MF.getSubtarget<PPCSubtarget>().isUsingPCRelativeCalls()) && | |
| "TOC pointer used in a function using PC-Relative addressing!"); | |
| if (skipFunction(MF.getFunction())) | |
| return false; | |
| return simplifyCode(); | |
| } | |
| }; | |
| // Initialize class variables. | |
| void PPCMIPeephole::initialize(MachineFunction &MFParm) { | |
| MF = &MFParm; | |
| MRI = &MF->getRegInfo(); | |
| MDT = &getAnalysis<MachineDominatorTree>(); | |
| MPDT = &getAnalysis<MachinePostDominatorTree>(); | |
| MBFI = &getAnalysis<MachineBlockFrequencyInfo>(); | |
| EntryFreq = MBFI->getEntryFreq(); | |
| TII = MF->getSubtarget<PPCSubtarget>().getInstrInfo(); | |
| LLVM_DEBUG(dbgs() << "*** PowerPC MI peephole pass ***\n\n"); | |
| LLVM_DEBUG(MF->dump()); | |
| } | |
| static MachineInstr *getVRegDefOrNull(MachineOperand *Op, | |
| MachineRegisterInfo *MRI) { | |
| assert(Op && "Invalid Operand!"); | |
| if (!Op->isReg()) | |
| return nullptr; | |
| Register Reg = Op->getReg(); | |
| if (!Reg.isVirtual()) | |
| return nullptr; | |
| return MRI->getVRegDef(Reg); | |
| } | |
| // This function returns number of known zero bits in output of MI | |
| // starting from the most significant bit. | |
| static unsigned getKnownLeadingZeroCount(const unsigned Reg, | |
| const PPCInstrInfo *TII, | |
| const MachineRegisterInfo *MRI) { | |
| MachineInstr *MI = MRI->getVRegDef(Reg); | |
| unsigned Opcode = MI->getOpcode(); | |
| if (Opcode == PPC::RLDICL || Opcode == PPC::RLDICL_rec || | |
| Opcode == PPC::RLDCL || Opcode == PPC::RLDCL_rec) | |
| return MI->getOperand(3).getImm(); | |
| if ((Opcode == PPC::RLDIC || Opcode == PPC::RLDIC_rec) && | |
| MI->getOperand(3).getImm() <= 63 - MI->getOperand(2).getImm()) | |
| return MI->getOperand(3).getImm(); | |
| if ((Opcode == PPC::RLWINM || Opcode == PPC::RLWINM_rec || | |
| Opcode == PPC::RLWNM || Opcode == PPC::RLWNM_rec || | |
| Opcode == PPC::RLWINM8 || Opcode == PPC::RLWNM8) && | |
| MI->getOperand(3).getImm() <= MI->getOperand(4).getImm()) | |
| return 32 + MI->getOperand(3).getImm(); | |
| if (Opcode == PPC::ANDI_rec) { | |
| uint16_t Imm = MI->getOperand(2).getImm(); | |
| return 48 + countLeadingZeros(Imm); | |
| } | |
| if (Opcode == PPC::CNTLZW || Opcode == PPC::CNTLZW_rec || | |
| Opcode == PPC::CNTTZW || Opcode == PPC::CNTTZW_rec || | |
| Opcode == PPC::CNTLZW8 || Opcode == PPC::CNTTZW8) | |
| // The result ranges from 0 to 32. | |
| return 58; | |
| if (Opcode == PPC::CNTLZD || Opcode == PPC::CNTLZD_rec || | |
| Opcode == PPC::CNTTZD || Opcode == PPC::CNTTZD_rec) | |
| // The result ranges from 0 to 64. | |
| return 57; | |
| if (Opcode == PPC::LHZ || Opcode == PPC::LHZX || | |
| Opcode == PPC::LHZ8 || Opcode == PPC::LHZX8 || | |
| Opcode == PPC::LHZU || Opcode == PPC::LHZUX || | |
| Opcode == PPC::LHZU8 || Opcode == PPC::LHZUX8) | |
| return 48; | |
| if (Opcode == PPC::LBZ || Opcode == PPC::LBZX || | |
| Opcode == PPC::LBZ8 || Opcode == PPC::LBZX8 || | |
| Opcode == PPC::LBZU || Opcode == PPC::LBZUX || | |
| Opcode == PPC::LBZU8 || Opcode == PPC::LBZUX8) | |
| return 56; | |
| if (TII->isZeroExtended(Reg, MRI)) | |
| return 32; | |
| return 0; | |
| } | |
| // This function maintains a map for the pairs <TOC Save Instr, Keep> | |
| // Each time a new TOC save is encountered, it checks if any of the existing | |
| // ones are dominated by the new one. If so, it marks the existing one as | |
| // redundant by setting it's entry in the map as false. It then adds the new | |
| // instruction to the map with either true or false depending on if any | |
| // existing instructions dominated the new one. | |
| void PPCMIPeephole::UpdateTOCSaves( | |
| std::map<MachineInstr *, bool> &TOCSaves, MachineInstr *MI) { | |
| assert(TII->isTOCSaveMI(*MI) && "Expecting a TOC save instruction here"); | |
| // FIXME: Saving TOC in prologue hasn't been implemented well in AIX ABI part, | |
| // here only support it under ELFv2. | |
| if (MF->getSubtarget<PPCSubtarget>().isELFv2ABI()) { | |
| PPCFunctionInfo *FI = MF->getInfo<PPCFunctionInfo>(); | |
| MachineBasicBlock *Entry = &MF->front(); | |
| uint64_t CurrBlockFreq = MBFI->getBlockFreq(MI->getParent()).getFrequency(); | |
| // If the block in which the TOC save resides is in a block that | |
| // post-dominates Entry, or a block that is hotter than entry (keep in mind | |
| // that early MachineLICM has already run so the TOC save won't be hoisted) | |
| // we can just do the save in the prologue. | |
| if (CurrBlockFreq > EntryFreq || MPDT->dominates(MI->getParent(), Entry)) | |
| FI->setMustSaveTOC(true); | |
| // If we are saving the TOC in the prologue, all the TOC saves can be | |
| // removed from the code. | |
| if (FI->mustSaveTOC()) { | |
| for (auto &TOCSave : TOCSaves) | |
| TOCSave.second = false; | |
| // Add new instruction to map. | |
| TOCSaves[MI] = false; | |
| return; | |
| } | |
| } | |
| bool Keep = true; | |
| for (auto &I : TOCSaves) { | |
| MachineInstr *CurrInst = I.first; | |
| // If new instruction dominates an existing one, mark existing one as | |
| // redundant. | |
| if (I.second && MDT->dominates(MI, CurrInst)) | |
| I.second = false; | |
| // Check if the new instruction is redundant. | |
| if (MDT->dominates(CurrInst, MI)) { | |
| Keep = false; | |
| break; | |
| } | |
| } | |
| // Add new instruction to map. | |
| TOCSaves[MI] = Keep; | |
| } | |
| // This function returns a list of all PHI nodes in the tree starting from | |
| // the RootPHI node. We perform a BFS traversal to get an ordered list of nodes. | |
| // The list initially only contains the root PHI. When we visit a PHI node, we | |
| // add it to the list. We continue to look for other PHI node operands while | |
| // there are nodes to visit in the list. The function returns false if the | |
| // optimization cannot be applied on this tree. | |
| static bool collectUnprimedAccPHIs(MachineRegisterInfo *MRI, | |
| MachineInstr *RootPHI, | |
| SmallVectorImpl<MachineInstr *> &PHIs) { | |
| PHIs.push_back(RootPHI); | |
| unsigned VisitedIndex = 0; | |
| while (VisitedIndex < PHIs.size()) { | |
| MachineInstr *VisitedPHI = PHIs[VisitedIndex]; | |
| for (unsigned PHIOp = 1, NumOps = VisitedPHI->getNumOperands(); | |
| PHIOp != NumOps; PHIOp += 2) { | |
| Register RegOp = VisitedPHI->getOperand(PHIOp).getReg(); | |
| if (!RegOp.isVirtual()) | |
| return false; | |
| MachineInstr *Instr = MRI->getVRegDef(RegOp); | |
| // While collecting the PHI nodes, we check if they can be converted (i.e. | |
| // all the operands are either copies, implicit defs or PHI nodes). | |
| unsigned Opcode = Instr->getOpcode(); | |
| if (Opcode == PPC::COPY) { | |
| Register Reg = Instr->getOperand(1).getReg(); | |
| if (!Reg.isVirtual() || MRI->getRegClass(Reg) != &PPC::ACCRCRegClass) | |
| return false; | |
| } else if (Opcode != PPC::IMPLICIT_DEF && Opcode != PPC::PHI) | |
| return false; | |
| // If we detect a cycle in the PHI nodes, we exit. It would be | |
| // possible to change cycles as well, but that would add a lot | |
| // of complexity for a case that is unlikely to occur with MMA | |
| // code. | |
| if (Opcode != PPC::PHI) | |
| continue; | |
| if (llvm::is_contained(PHIs, Instr)) | |
| return false; | |
| PHIs.push_back(Instr); | |
| } | |
| VisitedIndex++; | |
| } | |
| return true; | |
| } | |
| // This function changes the unprimed accumulator PHI nodes in the PHIs list to | |
| // primed accumulator PHI nodes. The list is traversed in reverse order to | |
| // change all the PHI operands of a PHI node before changing the node itself. | |
| // We keep a map to associate each changed PHI node to its non-changed form. | |
| static void convertUnprimedAccPHIs(const PPCInstrInfo *TII, | |
| MachineRegisterInfo *MRI, | |
| SmallVectorImpl<MachineInstr *> &PHIs, | |
| Register Dst) { | |
| DenseMap<MachineInstr *, MachineInstr *> ChangedPHIMap; | |
| for (MachineInstr *PHI : llvm::reverse(PHIs)) { | |
| SmallVector<std::pair<MachineOperand, MachineOperand>, 4> PHIOps; | |
| // We check if the current PHI node can be changed by looking at its | |
| // operands. If all the operands are either copies from primed | |
| // accumulators, implicit definitions or other unprimed accumulator | |
| // PHI nodes, we change it. | |
| for (unsigned PHIOp = 1, NumOps = PHI->getNumOperands(); PHIOp != NumOps; | |
| PHIOp += 2) { | |
| Register RegOp = PHI->getOperand(PHIOp).getReg(); | |
| MachineInstr *PHIInput = MRI->getVRegDef(RegOp); | |
| unsigned Opcode = PHIInput->getOpcode(); | |
| assert((Opcode == PPC::COPY || Opcode == PPC::IMPLICIT_DEF || | |
| Opcode == PPC::PHI) && | |
| "Unexpected instruction"); | |
| if (Opcode == PPC::COPY) { | |
| assert(MRI->getRegClass(PHIInput->getOperand(1).getReg()) == | |
| &PPC::ACCRCRegClass && | |
| "Unexpected register class"); | |
| PHIOps.push_back({PHIInput->getOperand(1), PHI->getOperand(PHIOp + 1)}); | |
| } else if (Opcode == PPC::IMPLICIT_DEF) { | |
| Register AccReg = MRI->createVirtualRegister(&PPC::ACCRCRegClass); | |
| BuildMI(*PHIInput->getParent(), PHIInput, PHIInput->getDebugLoc(), | |
| TII->get(PPC::IMPLICIT_DEF), AccReg); | |
| PHIOps.push_back({MachineOperand::CreateReg(AccReg, false), | |
| PHI->getOperand(PHIOp + 1)}); | |
| } else if (Opcode == PPC::PHI) { | |
| // We found a PHI operand. At this point we know this operand | |
| // has already been changed so we get its associated changed form | |
| // from the map. | |
| assert(ChangedPHIMap.count(PHIInput) == 1 && | |
| "This PHI node should have already been changed."); | |
| MachineInstr *PrimedAccPHI = ChangedPHIMap.lookup(PHIInput); | |
| PHIOps.push_back({MachineOperand::CreateReg( | |
| PrimedAccPHI->getOperand(0).getReg(), false), | |
| PHI->getOperand(PHIOp + 1)}); | |
| } | |
| } | |
| Register AccReg = Dst; | |
| // If the PHI node we are changing is the root node, the register it defines | |
| // will be the destination register of the original copy (of the PHI def). | |
| // For all other PHI's in the list, we need to create another primed | |
| // accumulator virtual register as the PHI will no longer define the | |
| // unprimed accumulator. | |
| if (PHI != PHIs[0]) | |
| AccReg = MRI->createVirtualRegister(&PPC::ACCRCRegClass); | |
| MachineInstrBuilder NewPHI = BuildMI( | |
| *PHI->getParent(), PHI, PHI->getDebugLoc(), TII->get(PPC::PHI), AccReg); | |
| for (auto RegMBB : PHIOps) | |
| NewPHI.add(RegMBB.first).add(RegMBB.second); | |
| ChangedPHIMap[PHI] = NewPHI.getInstr(); | |
| LLVM_DEBUG(dbgs() << "Converting PHI: "); | |
| LLVM_DEBUG(PHI->dump()); | |
| LLVM_DEBUG(dbgs() << "To: "); | |
| LLVM_DEBUG(NewPHI.getInstr()->dump()); | |
| } | |
| } | |
| // Perform peephole optimizations. | |
| bool PPCMIPeephole::simplifyCode() { | |
| bool Simplified = false; | |
| bool TrapOpt = false; | |
| MachineInstr* ToErase = nullptr; | |
| std::map<MachineInstr *, bool> TOCSaves; | |
| const TargetRegisterInfo *TRI = &TII->getRegisterInfo(); | |
| NumFunctionsEnteredInMIPeephole++; | |
| if (ConvertRegReg) { | |
| // Fixed-point conversion of reg/reg instructions fed by load-immediate | |
| // into reg/imm instructions. FIXME: This is expensive, control it with | |
| // an option. | |
| bool SomethingChanged = false; | |
| do { | |
| NumFixedPointIterations++; | |
| SomethingChanged = false; | |
| for (MachineBasicBlock &MBB : *MF) { | |
| for (MachineInstr &MI : MBB) { | |
| if (MI.isDebugInstr()) | |
| continue; | |
| if (TII->convertToImmediateForm(MI)) { | |
| // We don't erase anything in case the def has other uses. Let DCE | |
| // remove it if it can be removed. | |
| LLVM_DEBUG(dbgs() << "Converted instruction to imm form: "); | |
| LLVM_DEBUG(MI.dump()); | |
| NumConvertedToImmediateForm++; | |
| SomethingChanged = true; | |
| Simplified = true; | |
| continue; | |
| } | |
| } | |
| } | |
| } while (SomethingChanged && FixedPointRegToImm); | |
| } | |
| for (MachineBasicBlock &MBB : *MF) { | |
| for (MachineInstr &MI : MBB) { | |
| // If the previous instruction was marked for elimination, | |
| // remove it now. | |
| if (ToErase) { | |
| LLVM_DEBUG(dbgs() << "Deleting instruction: "); | |
| LLVM_DEBUG(ToErase->dump()); | |
| ToErase->eraseFromParent(); | |
| ToErase = nullptr; | |
| } | |
| // If a conditional trap instruction got optimized to an | |
| // unconditional trap, eliminate all the instructions after | |
| // the trap. | |
| if (EnableTrapOptimization && TrapOpt) { | |
| ToErase = &MI; | |
| continue; | |
| } | |
| // Ignore debug instructions. | |
| if (MI.isDebugInstr()) | |
| continue; | |
| // Per-opcode peepholes. | |
| switch (MI.getOpcode()) { | |
| default: | |
| break; | |
| case PPC::COPY: { | |
| Register Src = MI.getOperand(1).getReg(); | |
| Register Dst = MI.getOperand(0).getReg(); | |
| if (!Src.isVirtual() || !Dst.isVirtual()) | |
| break; | |
| if (MRI->getRegClass(Src) != &PPC::UACCRCRegClass || | |
| MRI->getRegClass(Dst) != &PPC::ACCRCRegClass) | |
| break; | |
| // We are copying an unprimed accumulator to a primed accumulator. | |
| // If the input to the copy is a PHI that is fed only by (i) copies in | |
| // the other direction (ii) implicitly defined unprimed accumulators or | |
| // (iii) other PHI nodes satisfying (i) and (ii), we can change | |
| // the PHI to a PHI on primed accumulators (as long as we also change | |
| // its operands). To detect and change such copies, we first get a list | |
| // of all the PHI nodes starting from the root PHI node in BFS order. | |
| // We then visit all these PHI nodes to check if they can be changed to | |
| // primed accumulator PHI nodes and if so, we change them. | |
| MachineInstr *RootPHI = MRI->getVRegDef(Src); | |
| if (RootPHI->getOpcode() != PPC::PHI) | |
| break; | |
| SmallVector<MachineInstr *, 4> PHIs; | |
| if (!collectUnprimedAccPHIs(MRI, RootPHI, PHIs)) | |
| break; | |
| convertUnprimedAccPHIs(TII, MRI, PHIs, Dst); | |
| ToErase = &MI; | |
| break; | |
| } | |
| case PPC::LI: | |
| case PPC::LI8: { | |
| // If we are materializing a zero, look for any use operands for which | |
| // zero means immediate zero. All such operands can be replaced with | |
| // PPC::ZERO. | |
| if (!MI.getOperand(1).isImm() || MI.getOperand(1).getImm() != 0) | |
| break; | |
| Register MIDestReg = MI.getOperand(0).getReg(); | |
| for (MachineInstr& UseMI : MRI->use_instructions(MIDestReg)) | |
| Simplified |= TII->onlyFoldImmediate(UseMI, MI, MIDestReg); | |
| if (MRI->use_nodbg_empty(MIDestReg)) { | |
| ++NumLoadImmZeroFoldedAndRemoved; | |
| ToErase = &MI; | |
| } | |
| break; | |
| } | |
| case PPC::STW: | |
| case PPC::STD: { | |
| MachineFrameInfo &MFI = MF->getFrameInfo(); | |
| if (MFI.hasVarSizedObjects() || | |
| (!MF->getSubtarget<PPCSubtarget>().isELFv2ABI() && | |
| !MF->getSubtarget<PPCSubtarget>().isAIXABI())) | |
| break; | |
| // When encountering a TOC save instruction, call UpdateTOCSaves | |
| // to add it to the TOCSaves map and mark any existing TOC saves | |
| // it dominates as redundant. | |
| if (TII->isTOCSaveMI(MI)) | |
| UpdateTOCSaves(TOCSaves, &MI); | |
| break; | |
| } | |
| case PPC::XXPERMDI: { | |
| // Perform simplifications of 2x64 vector swaps and splats. | |
| // A swap is identified by an immediate value of 2, and a splat | |
| // is identified by an immediate value of 0 or 3. | |
| int Immed = MI.getOperand(3).getImm(); | |
| if (Immed == 1) | |
| break; | |
| // For each of these simplifications, we need the two source | |
| // regs to match. Unfortunately, MachineCSE ignores COPY and | |
| // SUBREG_TO_REG, so for example we can see | |
| // XXPERMDI t, SUBREG_TO_REG(s), SUBREG_TO_REG(s), immed. | |
| // We have to look through chains of COPY and SUBREG_TO_REG | |
| // to find the real source values for comparison. | |
| Register TrueReg1 = | |
| TRI->lookThruCopyLike(MI.getOperand(1).getReg(), MRI); | |
| Register TrueReg2 = | |
| TRI->lookThruCopyLike(MI.getOperand(2).getReg(), MRI); | |
| if (!(TrueReg1 == TrueReg2 && TrueReg1.isVirtual())) | |
| break; | |
| MachineInstr *DefMI = MRI->getVRegDef(TrueReg1); | |
| if (!DefMI) | |
| break; | |
| unsigned DefOpc = DefMI->getOpcode(); | |
| // If this is a splat fed by a splatting load, the splat is | |
| // redundant. Replace with a copy. This doesn't happen directly due | |
| // to code in PPCDAGToDAGISel.cpp, but it can happen when converting | |
| // a load of a double to a vector of 64-bit integers. | |
| auto isConversionOfLoadAndSplat = [=, this]() -> bool { | |
| if (DefOpc != PPC::XVCVDPSXDS && DefOpc != PPC::XVCVDPUXDS) | |
| return false; | |
| Register FeedReg1 = | |
| TRI->lookThruCopyLike(DefMI->getOperand(1).getReg(), MRI); | |
| if (FeedReg1.isVirtual()) { | |
| MachineInstr *LoadMI = MRI->getVRegDef(FeedReg1); | |
| if (LoadMI && LoadMI->getOpcode() == PPC::LXVDSX) | |
| return true; | |
| } | |
| return false; | |
| }; | |
| if ((Immed == 0 || Immed == 3) && | |
| (DefOpc == PPC::LXVDSX || isConversionOfLoadAndSplat())) { | |
| LLVM_DEBUG(dbgs() << "Optimizing load-and-splat/splat " | |
| "to load-and-splat/copy: "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(MI.getOperand(1)); | |
| ToErase = &MI; | |
| Simplified = true; | |
| } | |
| // If this is a splat or a swap fed by another splat, we | |
| // can replace it with a copy. | |
| if (DefOpc == PPC::XXPERMDI) { | |
| Register DefReg1 = DefMI->getOperand(1).getReg(); | |
| Register DefReg2 = DefMI->getOperand(2).getReg(); | |
| unsigned DefImmed = DefMI->getOperand(3).getImm(); | |
| // If the two inputs are not the same register, check to see if | |
| // they originate from the same virtual register after only | |
| // copy-like instructions. | |
| if (DefReg1 != DefReg2) { | |
| Register FeedReg1 = TRI->lookThruCopyLike(DefReg1, MRI); | |
| Register FeedReg2 = TRI->lookThruCopyLike(DefReg2, MRI); | |
| if (!(FeedReg1 == FeedReg2 && FeedReg1.isVirtual())) | |
| break; | |
| } | |
| if (DefImmed == 0 || DefImmed == 3) { | |
| LLVM_DEBUG(dbgs() << "Optimizing splat/swap or splat/splat " | |
| "to splat/copy: "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(MI.getOperand(1)); | |
| ToErase = &MI; | |
| Simplified = true; | |
| } | |
| // If this is a splat fed by a swap, we can simplify modify | |
| // the splat to splat the other value from the swap's input | |
| // parameter. | |
| else if ((Immed == 0 || Immed == 3) && DefImmed == 2) { | |
| LLVM_DEBUG(dbgs() << "Optimizing swap/splat => splat: "); | |
| LLVM_DEBUG(MI.dump()); | |
| MI.getOperand(1).setReg(DefReg1); | |
| MI.getOperand(2).setReg(DefReg2); | |
| MI.getOperand(3).setImm(3 - Immed); | |
| Simplified = true; | |
| } | |
| // If this is a swap fed by a swap, we can replace it | |
| // with a copy from the first swap's input. | |
| else if (Immed == 2 && DefImmed == 2) { | |
| LLVM_DEBUG(dbgs() << "Optimizing swap/swap => copy: "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(DefMI->getOperand(1)); | |
| ToErase = &MI; | |
| Simplified = true; | |
| } | |
| } else if ((Immed == 0 || Immed == 3 || Immed == 2) && | |
| DefOpc == PPC::XXPERMDIs && | |
| (DefMI->getOperand(2).getImm() == 0 || | |
| DefMI->getOperand(2).getImm() == 3)) { | |
| ToErase = &MI; | |
| Simplified = true; | |
| // Swap of a splat, convert to copy. | |
| if (Immed == 2) { | |
| LLVM_DEBUG(dbgs() << "Optimizing swap(splat) => copy(splat): "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(MI.getOperand(1)); | |
| break; | |
| } | |
| // Splat fed by another splat - switch the output of the first | |
| // and remove the second. | |
| DefMI->getOperand(0).setReg(MI.getOperand(0).getReg()); | |
| LLVM_DEBUG(dbgs() << "Removing redundant splat: "); | |
| LLVM_DEBUG(MI.dump()); | |
| } | |
| break; | |
| } | |
| case PPC::VSPLTB: | |
| case PPC::VSPLTH: | |
| case PPC::XXSPLTW: { | |
| unsigned MyOpcode = MI.getOpcode(); | |
| unsigned OpNo = MyOpcode == PPC::XXSPLTW ? 1 : 2; | |
| Register TrueReg = | |
| TRI->lookThruCopyLike(MI.getOperand(OpNo).getReg(), MRI); | |
| if (!TrueReg.isVirtual()) | |
| break; | |
| MachineInstr *DefMI = MRI->getVRegDef(TrueReg); | |
| if (!DefMI) | |
| break; | |
| unsigned DefOpcode = DefMI->getOpcode(); | |
| auto isConvertOfSplat = [=, this]() -> bool { | |
| if (DefOpcode != PPC::XVCVSPSXWS && DefOpcode != PPC::XVCVSPUXWS) | |
| return false; | |
| Register ConvReg = DefMI->getOperand(1).getReg(); | |
| if (!ConvReg.isVirtual()) | |
| return false; | |
| MachineInstr *Splt = MRI->getVRegDef(ConvReg); | |
| return Splt && (Splt->getOpcode() == PPC::LXVWSX || | |
| Splt->getOpcode() == PPC::XXSPLTW); | |
| }; | |
| bool AlreadySplat = (MyOpcode == DefOpcode) || | |
| (MyOpcode == PPC::VSPLTB && DefOpcode == PPC::VSPLTBs) || | |
| (MyOpcode == PPC::VSPLTH && DefOpcode == PPC::VSPLTHs) || | |
| (MyOpcode == PPC::XXSPLTW && DefOpcode == PPC::XXSPLTWs) || | |
| (MyOpcode == PPC::XXSPLTW && DefOpcode == PPC::LXVWSX) || | |
| (MyOpcode == PPC::XXSPLTW && DefOpcode == PPC::MTVSRWS)|| | |
| (MyOpcode == PPC::XXSPLTW && isConvertOfSplat()); | |
| // If the instruction[s] that feed this splat have already splat | |
| // the value, this splat is redundant. | |
| if (AlreadySplat) { | |
| LLVM_DEBUG(dbgs() << "Changing redundant splat to a copy: "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(MI.getOperand(OpNo)); | |
| ToErase = &MI; | |
| Simplified = true; | |
| } | |
| // Splat fed by a shift. Usually when we align value to splat into | |
| // vector element zero. | |
| if (DefOpcode == PPC::XXSLDWI) { | |
| Register ShiftRes = DefMI->getOperand(0).getReg(); | |
| Register ShiftOp1 = DefMI->getOperand(1).getReg(); | |
| Register ShiftOp2 = DefMI->getOperand(2).getReg(); | |
| unsigned ShiftImm = DefMI->getOperand(3).getImm(); | |
| unsigned SplatImm = | |
| MI.getOperand(MyOpcode == PPC::XXSPLTW ? 2 : 1).getImm(); | |
| if (ShiftOp1 == ShiftOp2) { | |
| unsigned NewElem = (SplatImm + ShiftImm) & 0x3; | |
| if (MRI->hasOneNonDBGUse(ShiftRes)) { | |
| LLVM_DEBUG(dbgs() << "Removing redundant shift: "); | |
| LLVM_DEBUG(DefMI->dump()); | |
| ToErase = DefMI; | |
| } | |
| Simplified = true; | |
| LLVM_DEBUG(dbgs() << "Changing splat immediate from " << SplatImm | |
| << " to " << NewElem << " in instruction: "); | |
| LLVM_DEBUG(MI.dump()); | |
| MI.getOperand(1).setReg(ShiftOp1); | |
| MI.getOperand(2).setImm(NewElem); | |
| } | |
| } | |
| break; | |
| } | |
| case PPC::XVCVDPSP: { | |
| // If this is a DP->SP conversion fed by an FRSP, the FRSP is redundant. | |
| Register TrueReg = | |
| TRI->lookThruCopyLike(MI.getOperand(1).getReg(), MRI); | |
| if (!TrueReg.isVirtual()) | |
| break; | |
| MachineInstr *DefMI = MRI->getVRegDef(TrueReg); | |
| // This can occur when building a vector of single precision or integer | |
| // values. | |
| if (DefMI && DefMI->getOpcode() == PPC::XXPERMDI) { | |
| Register DefsReg1 = | |
| TRI->lookThruCopyLike(DefMI->getOperand(1).getReg(), MRI); | |
| Register DefsReg2 = | |
| TRI->lookThruCopyLike(DefMI->getOperand(2).getReg(), MRI); | |
| if (!DefsReg1.isVirtual() || !DefsReg2.isVirtual()) | |
| break; | |
| MachineInstr *P1 = MRI->getVRegDef(DefsReg1); | |
| MachineInstr *P2 = MRI->getVRegDef(DefsReg2); | |
| if (!P1 || !P2) | |
| break; | |
| // Remove the passed FRSP/XSRSP instruction if it only feeds this MI | |
| // and set any uses of that FRSP/XSRSP (in this MI) to the source of | |
| // the FRSP/XSRSP. | |
| auto removeFRSPIfPossible = [&](MachineInstr *RoundInstr) { | |
| unsigned Opc = RoundInstr->getOpcode(); | |
| if ((Opc == PPC::FRSP || Opc == PPC::XSRSP) && | |
| MRI->hasOneNonDBGUse(RoundInstr->getOperand(0).getReg())) { | |
| Simplified = true; | |
| Register ConvReg1 = RoundInstr->getOperand(1).getReg(); | |
| Register FRSPDefines = RoundInstr->getOperand(0).getReg(); | |
| MachineInstr &Use = *(MRI->use_instr_nodbg_begin(FRSPDefines)); | |
| for (int i = 0, e = Use.getNumOperands(); i < e; ++i) | |
| if (Use.getOperand(i).isReg() && | |
| Use.getOperand(i).getReg() == FRSPDefines) | |
| Use.getOperand(i).setReg(ConvReg1); | |
| LLVM_DEBUG(dbgs() << "Removing redundant FRSP/XSRSP:\n"); | |
| LLVM_DEBUG(RoundInstr->dump()); | |
| LLVM_DEBUG(dbgs() << "As it feeds instruction:\n"); | |
| LLVM_DEBUG(MI.dump()); | |
| LLVM_DEBUG(dbgs() << "Through instruction:\n"); | |
| LLVM_DEBUG(DefMI->dump()); | |
| RoundInstr->eraseFromParent(); | |
| } | |
| }; | |
| // If the input to XVCVDPSP is a vector that was built (even | |
| // partially) out of FRSP's, the FRSP(s) can safely be removed | |
| // since this instruction performs the same operation. | |
| if (P1 != P2) { | |
| removeFRSPIfPossible(P1); | |
| removeFRSPIfPossible(P2); | |
| break; | |
| } | |
| removeFRSPIfPossible(P1); | |
| } | |
| break; | |
| } | |
| case PPC::EXTSH: | |
| case PPC::EXTSH8: | |
| case PPC::EXTSH8_32_64: { | |
| if (!EnableSExtElimination) break; | |
| Register NarrowReg = MI.getOperand(1).getReg(); | |
| if (!NarrowReg.isVirtual()) | |
| break; | |
| MachineInstr *SrcMI = MRI->getVRegDef(NarrowReg); | |
| unsigned SrcOpcode = SrcMI->getOpcode(); | |
| // If we've used a zero-extending load that we will sign-extend, | |
| // just do a sign-extending load. | |
| if (SrcOpcode == PPC::LHZ || SrcOpcode == PPC::LHZX) { | |
| if (!MRI->hasOneNonDBGUse(SrcMI->getOperand(0).getReg())) | |
| break; | |
| // Determine the new opcode. We need to make sure that if the original | |
| // instruction has a 64 bit opcode we keep using a 64 bit opcode. | |
| // Likewise if the source is X-Form the new opcode should also be | |
| // X-Form. | |
| unsigned Opc = PPC::LHA; | |
| bool SourceIsXForm = SrcOpcode == PPC::LHZX; | |
| bool MIIs64Bit = MI.getOpcode() == PPC::EXTSH8 || | |
| MI.getOpcode() == PPC::EXTSH8_32_64; | |
| if (SourceIsXForm && MIIs64Bit) | |
| Opc = PPC::LHAX8; | |
| else if (SourceIsXForm && !MIIs64Bit) | |
| Opc = PPC::LHAX; | |
| else if (MIIs64Bit) | |
| Opc = PPC::LHA8; | |
| LLVM_DEBUG(dbgs() << "Zero-extending load\n"); | |
| LLVM_DEBUG(SrcMI->dump()); | |
| LLVM_DEBUG(dbgs() << "and sign-extension\n"); | |
| LLVM_DEBUG(MI.dump()); | |
| LLVM_DEBUG(dbgs() << "are merged into sign-extending load\n"); | |
| SrcMI->setDesc(TII->get(Opc)); | |
| SrcMI->getOperand(0).setReg(MI.getOperand(0).getReg()); | |
| ToErase = &MI; | |
| Simplified = true; | |
| NumEliminatedSExt++; | |
| } | |
| break; | |
| } | |
| case PPC::EXTSW: | |
| case PPC::EXTSW_32: | |
| case PPC::EXTSW_32_64: { | |
| if (!EnableSExtElimination) break; | |
| Register NarrowReg = MI.getOperand(1).getReg(); | |
| if (!NarrowReg.isVirtual()) | |
| break; | |
| MachineInstr *SrcMI = MRI->getVRegDef(NarrowReg); | |
| unsigned SrcOpcode = SrcMI->getOpcode(); | |
| // If we've used a zero-extending load that we will sign-extend, | |
| // just do a sign-extending load. | |
| if (SrcOpcode == PPC::LWZ || SrcOpcode == PPC::LWZX) { | |
| if (!MRI->hasOneNonDBGUse(SrcMI->getOperand(0).getReg())) | |
| break; | |
| // The transformation from a zero-extending load to a sign-extending | |
| // load is only legal when the displacement is a multiple of 4. | |
| // If the displacement is not at least 4 byte aligned, don't perform | |
| // the transformation. | |
| bool IsWordAligned = false; | |
| if (SrcMI->getOperand(1).isGlobal()) { | |
| const GlobalObject *GO = | |
| dyn_cast<GlobalObject>(SrcMI->getOperand(1).getGlobal()); | |
| if (GO && GO->getAlign() && *GO->getAlign() >= 4) | |
| IsWordAligned = true; | |
| } else if (SrcMI->getOperand(1).isImm()) { | |
| int64_t Value = SrcMI->getOperand(1).getImm(); | |
| if (Value % 4 == 0) | |
| IsWordAligned = true; | |
| } | |
| // Determine the new opcode. We need to make sure that if the original | |
| // instruction has a 64 bit opcode we keep using a 64 bit opcode. | |
| // Likewise if the source is X-Form the new opcode should also be | |
| // X-Form. | |
| unsigned Opc = PPC::LWA_32; | |
| bool SourceIsXForm = SrcOpcode == PPC::LWZX; | |
| bool MIIs64Bit = MI.getOpcode() == PPC::EXTSW || | |
| MI.getOpcode() == PPC::EXTSW_32_64; | |
| if (SourceIsXForm && MIIs64Bit) | |
| Opc = PPC::LWAX; | |
| else if (SourceIsXForm && !MIIs64Bit) | |
| Opc = PPC::LWAX_32; | |
| else if (MIIs64Bit) | |
| Opc = PPC::LWA; | |
| if (!IsWordAligned && (Opc == PPC::LWA || Opc == PPC::LWA_32)) | |
| break; | |
| LLVM_DEBUG(dbgs() << "Zero-extending load\n"); | |
| LLVM_DEBUG(SrcMI->dump()); | |
| LLVM_DEBUG(dbgs() << "and sign-extension\n"); | |
| LLVM_DEBUG(MI.dump()); | |
| LLVM_DEBUG(dbgs() << "are merged into sign-extending load\n"); | |
| SrcMI->setDesc(TII->get(Opc)); | |
| SrcMI->getOperand(0).setReg(MI.getOperand(0).getReg()); | |
| ToErase = &MI; | |
| Simplified = true; | |
| NumEliminatedSExt++; | |
| } else if (MI.getOpcode() == PPC::EXTSW_32_64 && | |
| TII->isSignExtended(NarrowReg, MRI)) { | |
| // We can eliminate EXTSW if the input is known to be already | |
| // sign-extended. | |
| LLVM_DEBUG(dbgs() << "Removing redundant sign-extension\n"); | |
| Register TmpReg = | |
| MF->getRegInfo().createVirtualRegister(&PPC::G8RCRegClass); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::IMPLICIT_DEF), | |
| TmpReg); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::INSERT_SUBREG), | |
| MI.getOperand(0).getReg()) | |
| .addReg(TmpReg) | |
| .addReg(NarrowReg) | |
| .addImm(PPC::sub_32); | |
| ToErase = &MI; | |
| Simplified = true; | |
| NumEliminatedSExt++; | |
| } | |
| break; | |
| } | |
| case PPC::RLDICL: { | |
| // We can eliminate RLDICL (e.g. for zero-extension) | |
| // if all bits to clear are already zero in the input. | |
| // This code assume following code sequence for zero-extension. | |
| // %6 = COPY %5:sub_32; (optional) | |
| // %8 = IMPLICIT_DEF; | |
| // %7<def,tied1> = INSERT_SUBREG %8<tied0>, %6, sub_32; | |
| if (!EnableZExtElimination) break; | |
| if (MI.getOperand(2).getImm() != 0) | |
| break; | |
| Register SrcReg = MI.getOperand(1).getReg(); | |
| if (!SrcReg.isVirtual()) | |
| break; | |
| MachineInstr *SrcMI = MRI->getVRegDef(SrcReg); | |
| if (!(SrcMI && SrcMI->getOpcode() == PPC::INSERT_SUBREG && | |
| SrcMI->getOperand(0).isReg() && SrcMI->getOperand(1).isReg())) | |
| break; | |
| MachineInstr *ImpDefMI, *SubRegMI; | |
| ImpDefMI = MRI->getVRegDef(SrcMI->getOperand(1).getReg()); | |
| SubRegMI = MRI->getVRegDef(SrcMI->getOperand(2).getReg()); | |
| if (ImpDefMI->getOpcode() != PPC::IMPLICIT_DEF) break; | |
| SrcMI = SubRegMI; | |
| if (SubRegMI->getOpcode() == PPC::COPY) { | |
| Register CopyReg = SubRegMI->getOperand(1).getReg(); | |
| if (CopyReg.isVirtual()) | |
| SrcMI = MRI->getVRegDef(CopyReg); | |
| } | |
| if (!SrcMI->getOperand(0).isReg()) | |
| break; | |
| unsigned KnownZeroCount = | |
| getKnownLeadingZeroCount(SrcMI->getOperand(0).getReg(), TII, MRI); | |
| if (MI.getOperand(3).getImm() <= KnownZeroCount) { | |
| LLVM_DEBUG(dbgs() << "Removing redundant zero-extension\n"); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .addReg(SrcReg); | |
| ToErase = &MI; | |
| Simplified = true; | |
| NumEliminatedZExt++; | |
| } | |
| break; | |
| } | |
| // TODO: Any instruction that has an immediate form fed only by a PHI | |
| // whose operands are all load immediate can be folded away. We currently | |
| // do this for ADD instructions, but should expand it to arithmetic and | |
| // binary instructions with immediate forms in the future. | |
| case PPC::ADD4: | |
| case PPC::ADD8: { | |
| auto isSingleUsePHI = [&](MachineOperand *PhiOp) { | |
| assert(PhiOp && "Invalid Operand!"); | |
| MachineInstr *DefPhiMI = getVRegDefOrNull(PhiOp, MRI); | |
| return DefPhiMI && (DefPhiMI->getOpcode() == PPC::PHI) && | |
| MRI->hasOneNonDBGUse(DefPhiMI->getOperand(0).getReg()); | |
| }; | |
| auto dominatesAllSingleUseLIs = [&](MachineOperand *DominatorOp, | |
| MachineOperand *PhiOp) { | |
| assert(PhiOp && "Invalid Operand!"); | |
| assert(DominatorOp && "Invalid Operand!"); | |
| MachineInstr *DefPhiMI = getVRegDefOrNull(PhiOp, MRI); | |
| MachineInstr *DefDomMI = getVRegDefOrNull(DominatorOp, MRI); | |
| // Note: the vregs only show up at odd indices position of PHI Node, | |
| // the even indices position save the BB info. | |
| for (unsigned i = 1; i < DefPhiMI->getNumOperands(); i += 2) { | |
| MachineInstr *LiMI = | |
| getVRegDefOrNull(&DefPhiMI->getOperand(i), MRI); | |
| if (!LiMI || | |
| (LiMI->getOpcode() != PPC::LI && LiMI->getOpcode() != PPC::LI8) | |
| || !MRI->hasOneNonDBGUse(LiMI->getOperand(0).getReg()) || | |
| !MDT->dominates(DefDomMI, LiMI)) | |
| return false; | |
| } | |
| return true; | |
| }; | |
| MachineOperand Op1 = MI.getOperand(1); | |
| MachineOperand Op2 = MI.getOperand(2); | |
| if (isSingleUsePHI(&Op2) && dominatesAllSingleUseLIs(&Op1, &Op2)) | |
| std::swap(Op1, Op2); | |
| else if (!isSingleUsePHI(&Op1) || !dominatesAllSingleUseLIs(&Op2, &Op1)) | |
| break; // We don't have an ADD fed by LI's that can be transformed | |
| // Now we know that Op1 is the PHI node and Op2 is the dominator | |
| Register DominatorReg = Op2.getReg(); | |
| const TargetRegisterClass *TRC = MI.getOpcode() == PPC::ADD8 | |
| ? &PPC::G8RC_and_G8RC_NOX0RegClass | |
| : &PPC::GPRC_and_GPRC_NOR0RegClass; | |
| MRI->setRegClass(DominatorReg, TRC); | |
| // replace LIs with ADDIs | |
| MachineInstr *DefPhiMI = getVRegDefOrNull(&Op1, MRI); | |
| for (unsigned i = 1; i < DefPhiMI->getNumOperands(); i += 2) { | |
| MachineInstr *LiMI = getVRegDefOrNull(&DefPhiMI->getOperand(i), MRI); | |
| LLVM_DEBUG(dbgs() << "Optimizing LI to ADDI: "); | |
| LLVM_DEBUG(LiMI->dump()); | |
| // There could be repeated registers in the PHI, e.g: %1 = | |
| // PHI %6, <%bb.2>, %8, <%bb.3>, %8, <%bb.6>; So if we've | |
| // already replaced the def instruction, skip. | |
| if (LiMI->getOpcode() == PPC::ADDI || LiMI->getOpcode() == PPC::ADDI8) | |
| continue; | |
| assert((LiMI->getOpcode() == PPC::LI || | |
| LiMI->getOpcode() == PPC::LI8) && | |
| "Invalid Opcode!"); | |
| auto LiImm = LiMI->getOperand(1).getImm(); // save the imm of LI | |
| LiMI->removeOperand(1); // remove the imm of LI | |
| LiMI->setDesc(TII->get(LiMI->getOpcode() == PPC::LI ? PPC::ADDI | |
| : PPC::ADDI8)); | |
| MachineInstrBuilder(*LiMI->getParent()->getParent(), *LiMI) | |
| .addReg(DominatorReg) | |
| .addImm(LiImm); // restore the imm of LI | |
| LLVM_DEBUG(LiMI->dump()); | |
| } | |
| // Replace ADD with COPY | |
| LLVM_DEBUG(dbgs() << "Optimizing ADD to COPY: "); | |
| LLVM_DEBUG(MI.dump()); | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::COPY), | |
| MI.getOperand(0).getReg()) | |
| .add(Op1); | |
| ToErase = &MI; | |
| Simplified = true; | |
| NumOptADDLIs++; | |
| break; | |
| } | |
| case PPC::RLDICR: { | |
| Simplified |= emitRLDICWhenLoweringJumpTables(MI) || | |
| combineSEXTAndSHL(MI, ToErase); | |
| break; | |
| } | |
| case PPC::RLWINM: | |
| case PPC::RLWINM_rec: | |
| case PPC::RLWINM8: | |
| case PPC::RLWINM8_rec: { | |
| Simplified = TII->combineRLWINM(MI, &ToErase); | |
| if (Simplified) | |
| ++NumRotatesCollapsed; | |
| break; | |
| } | |
| // We will replace TD/TW/TDI/TWI with an unconditional trap if it will | |
| // always trap, we will delete the node if it will never trap. | |
| case PPC::TDI: | |
| case PPC::TWI: | |
| case PPC::TD: | |
| case PPC::TW: { | |
| if (!EnableTrapOptimization) break; | |
| MachineInstr *LiMI1 = getVRegDefOrNull(&MI.getOperand(1), MRI); | |
| MachineInstr *LiMI2 = getVRegDefOrNull(&MI.getOperand(2), MRI); | |
| bool IsOperand2Immediate = MI.getOperand(2).isImm(); | |
| // We can only do the optimization if we can get immediates | |
| // from both operands | |
| if (!(LiMI1 && (LiMI1->getOpcode() == PPC::LI || | |
| LiMI1->getOpcode() == PPC::LI8))) | |
| break; | |
| if (!IsOperand2Immediate && | |
| !(LiMI2 && (LiMI2->getOpcode() == PPC::LI || | |
| LiMI2->getOpcode() == PPC::LI8))) | |
| break; | |
| auto ImmOperand0 = MI.getOperand(0).getImm(); | |
| auto ImmOperand1 = LiMI1->getOperand(1).getImm(); | |
| auto ImmOperand2 = IsOperand2Immediate ? MI.getOperand(2).getImm() | |
| : LiMI2->getOperand(1).getImm(); | |
| // We will replace the MI with an unconditional trap if it will always | |
| // trap. | |
| if ((ImmOperand0 == 31) || | |
| ((ImmOperand0 & 0x10) && | |
| ((int64_t)ImmOperand1 < (int64_t)ImmOperand2)) || | |
| ((ImmOperand0 & 0x8) && | |
| ((int64_t)ImmOperand1 > (int64_t)ImmOperand2)) || | |
| ((ImmOperand0 & 0x2) && | |
| ((uint64_t)ImmOperand1 < (uint64_t)ImmOperand2)) || | |
| ((ImmOperand0 & 0x1) && | |
| ((uint64_t)ImmOperand1 > (uint64_t)ImmOperand2)) || | |
| ((ImmOperand0 & 0x4) && (ImmOperand1 == ImmOperand2))) { | |
| BuildMI(MBB, &MI, MI.getDebugLoc(), TII->get(PPC::TRAP)); | |
| TrapOpt = true; | |
| } | |
| // We will delete the MI if it will never trap. | |
| ToErase = &MI; | |
| Simplified = true; | |
| break; | |
| } | |
| } | |
| } | |
| // If the last instruction was marked for elimination, | |
| // remove it now. | |
| if (ToErase) { | |
| ToErase->eraseFromParent(); | |
| ToErase = nullptr; | |
| } | |
| // Reset TrapOpt to false at the end of the basic block. | |
| if (EnableTrapOptimization) | |
| TrapOpt = false; | |
| } | |
| // Eliminate all the TOC save instructions which are redundant. | |
| Simplified |= eliminateRedundantTOCSaves(TOCSaves); | |
| PPCFunctionInfo *FI = MF->getInfo<PPCFunctionInfo>(); | |
| if (FI->mustSaveTOC()) | |
| NumTOCSavesInPrologue++; | |
| // We try to eliminate redundant compare instruction. | |
| Simplified |= eliminateRedundantCompare(); | |
| return Simplified; | |
| } | |
| // helper functions for eliminateRedundantCompare | |
| static bool isEqOrNe(MachineInstr *BI) { | |
| PPC::Predicate Pred = (PPC::Predicate)BI->getOperand(0).getImm(); | |
| unsigned PredCond = PPC::getPredicateCondition(Pred); | |
| return (PredCond == PPC::PRED_EQ || PredCond == PPC::PRED_NE); | |
| } | |
| static bool isSupportedCmpOp(unsigned opCode) { | |
| return (opCode == PPC::CMPLD || opCode == PPC::CMPD || | |
| opCode == PPC::CMPLW || opCode == PPC::CMPW || | |
| opCode == PPC::CMPLDI || opCode == PPC::CMPDI || | |
| opCode == PPC::CMPLWI || opCode == PPC::CMPWI); | |
| } | |
| static bool is64bitCmpOp(unsigned opCode) { | |
| return (opCode == PPC::CMPLD || opCode == PPC::CMPD || | |
| opCode == PPC::CMPLDI || opCode == PPC::CMPDI); | |
| } | |
| static bool isSignedCmpOp(unsigned opCode) { | |
| return (opCode == PPC::CMPD || opCode == PPC::CMPW || | |
| opCode == PPC::CMPDI || opCode == PPC::CMPWI); | |
| } | |
| static unsigned getSignedCmpOpCode(unsigned opCode) { | |
| if (opCode == PPC::CMPLD) return PPC::CMPD; | |
| if (opCode == PPC::CMPLW) return PPC::CMPW; | |
| if (opCode == PPC::CMPLDI) return PPC::CMPDI; | |
| if (opCode == PPC::CMPLWI) return PPC::CMPWI; | |
| return opCode; | |
| } | |
| // We can decrement immediate x in (GE x) by changing it to (GT x-1) or | |
| // (LT x) to (LE x-1) | |
| static unsigned getPredicateToDecImm(MachineInstr *BI, MachineInstr *CMPI) { | |
| uint64_t Imm = CMPI->getOperand(2).getImm(); | |
| bool SignedCmp = isSignedCmpOp(CMPI->getOpcode()); | |
| if ((!SignedCmp && Imm == 0) || (SignedCmp && Imm == 0x8000)) | |
| return 0; | |
| PPC::Predicate Pred = (PPC::Predicate)BI->getOperand(0).getImm(); | |
| unsigned PredCond = PPC::getPredicateCondition(Pred); | |
| unsigned PredHint = PPC::getPredicateHint(Pred); | |
| if (PredCond == PPC::PRED_GE) | |
| return PPC::getPredicate(PPC::PRED_GT, PredHint); | |
| if (PredCond == PPC::PRED_LT) | |
| return PPC::getPredicate(PPC::PRED_LE, PredHint); | |
| return 0; | |
| } | |
| // We can increment immediate x in (GT x) by changing it to (GE x+1) or | |
| // (LE x) to (LT x+1) | |
| static unsigned getPredicateToIncImm(MachineInstr *BI, MachineInstr *CMPI) { | |
| uint64_t Imm = CMPI->getOperand(2).getImm(); | |
| bool SignedCmp = isSignedCmpOp(CMPI->getOpcode()); | |
| if ((!SignedCmp && Imm == 0xFFFF) || (SignedCmp && Imm == 0x7FFF)) | |
| return 0; | |
| PPC::Predicate Pred = (PPC::Predicate)BI->getOperand(0).getImm(); | |
| unsigned PredCond = PPC::getPredicateCondition(Pred); | |
| unsigned PredHint = PPC::getPredicateHint(Pred); | |
| if (PredCond == PPC::PRED_GT) | |
| return PPC::getPredicate(PPC::PRED_GE, PredHint); | |
| if (PredCond == PPC::PRED_LE) | |
| return PPC::getPredicate(PPC::PRED_LT, PredHint); | |
| return 0; | |
| } | |
| // This takes a Phi node and returns a register value for the specified BB. | |
| static unsigned getIncomingRegForBlock(MachineInstr *Phi, | |
| MachineBasicBlock *MBB) { | |
| for (unsigned I = 2, E = Phi->getNumOperands() + 1; I != E; I += 2) { | |
| MachineOperand &MO = Phi->getOperand(I); | |
| if (MO.getMBB() == MBB) | |
| return Phi->getOperand(I-1).getReg(); | |
| } | |
| llvm_unreachable("invalid src basic block for this Phi node\n"); | |
| return 0; | |
| } | |
| // This function tracks the source of the register through register copy. | |
| // If BB1 and BB2 are non-NULL, we also track PHI instruction in BB2 | |
| // assuming that the control comes from BB1 into BB2. | |
| static unsigned getSrcVReg(unsigned Reg, MachineBasicBlock *BB1, | |
| MachineBasicBlock *BB2, MachineRegisterInfo *MRI) { | |
| unsigned SrcReg = Reg; | |
| while (true) { | |
| unsigned NextReg = SrcReg; | |
| MachineInstr *Inst = MRI->getVRegDef(SrcReg); | |
| if (BB1 && Inst->getOpcode() == PPC::PHI && Inst->getParent() == BB2) { | |
| NextReg = getIncomingRegForBlock(Inst, BB1); | |
| // We track through PHI only once to avoid infinite loop. | |
| BB1 = nullptr; | |
| } | |
| else if (Inst->isFullCopy()) | |
| NextReg = Inst->getOperand(1).getReg(); | |
| if (NextReg == SrcReg || !Register::isVirtualRegister(NextReg)) | |
| break; | |
| SrcReg = NextReg; | |
| } | |
| return SrcReg; | |
| } | |
| static bool eligibleForCompareElimination(MachineBasicBlock &MBB, | |
| MachineBasicBlock *&PredMBB, | |
| MachineBasicBlock *&MBBtoMoveCmp, | |
| MachineRegisterInfo *MRI) { | |
| auto isEligibleBB = [&](MachineBasicBlock &BB) { | |
| auto BII = BB.getFirstInstrTerminator(); | |
| // We optimize BBs ending with a conditional branch. | |
| // We check only for BCC here, not BCCLR, because BCCLR | |
| // will be formed only later in the pipeline. | |
| if (BB.succ_size() == 2 && | |
| BII != BB.instr_end() && | |
| (*BII).getOpcode() == PPC::BCC && | |
| (*BII).getOperand(1).isReg()) { | |
| // We optimize only if the condition code is used only by one BCC. | |
| Register CndReg = (*BII).getOperand(1).getReg(); | |
| if (!CndReg.isVirtual() || !MRI->hasOneNonDBGUse(CndReg)) | |
| return false; | |
| MachineInstr *CMPI = MRI->getVRegDef(CndReg); | |
| // We assume compare and branch are in the same BB for ease of analysis. | |
| if (CMPI->getParent() != &BB) | |
| return false; | |
| // We skip this BB if a physical register is used in comparison. | |
| for (MachineOperand &MO : CMPI->operands()) | |
| if (MO.isReg() && !MO.getReg().isVirtual()) | |
| return false; | |
| return true; | |
| } | |
| return false; | |
| }; | |
| // If this BB has more than one successor, we can create a new BB and | |
| // move the compare instruction in the new BB. | |
| // So far, we do not move compare instruction to a BB having multiple | |
| // successors to avoid potentially increasing code size. | |
| auto isEligibleForMoveCmp = [](MachineBasicBlock &BB) { | |
| return BB.succ_size() == 1; | |
| }; | |
| if (!isEligibleBB(MBB)) | |
| return false; | |
| unsigned NumPredBBs = MBB.pred_size(); | |
| if (NumPredBBs == 1) { | |
| MachineBasicBlock *TmpMBB = *MBB.pred_begin(); | |
| if (isEligibleBB(*TmpMBB)) { | |
| PredMBB = TmpMBB; | |
| MBBtoMoveCmp = nullptr; | |
| return true; | |
| } | |
| } | |
| else if (NumPredBBs == 2) { | |
| // We check for partially redundant case. | |
| // So far, we support cases with only two predecessors | |
| // to avoid increasing the number of instructions. | |
| MachineBasicBlock::pred_iterator PI = MBB.pred_begin(); | |
| MachineBasicBlock *Pred1MBB = *PI; | |
| MachineBasicBlock *Pred2MBB = *(PI+1); | |
| if (isEligibleBB(*Pred1MBB) && isEligibleForMoveCmp(*Pred2MBB)) { | |
| // We assume Pred1MBB is the BB containing the compare to be merged and | |
| // Pred2MBB is the BB to which we will append a compare instruction. | |
| // Hence we can proceed as is. | |
| } | |
| else if (isEligibleBB(*Pred2MBB) && isEligibleForMoveCmp(*Pred1MBB)) { | |
| // We need to swap Pred1MBB and Pred2MBB to canonicalize. | |
| std::swap(Pred1MBB, Pred2MBB); | |
| } | |
| else return false; | |
| // Here, Pred2MBB is the BB to which we need to append a compare inst. | |
| // We cannot move the compare instruction if operands are not available | |
| // in Pred2MBB (i.e. defined in MBB by an instruction other than PHI). | |
| MachineInstr *BI = &*MBB.getFirstInstrTerminator(); | |
| MachineInstr *CMPI = MRI->getVRegDef(BI->getOperand(1).getReg()); | |
| for (int I = 1; I <= 2; I++) | |
| if (CMPI->getOperand(I).isReg()) { | |
| MachineInstr *Inst = MRI->getVRegDef(CMPI->getOperand(I).getReg()); | |
| if (Inst->getParent() == &MBB && Inst->getOpcode() != PPC::PHI) | |
| return false; | |
| } | |
| PredMBB = Pred1MBB; | |
| MBBtoMoveCmp = Pred2MBB; | |
| return true; | |
| } | |
| return false; | |
| } | |
| // This function will iterate over the input map containing a pair of TOC save | |
| // instruction and a flag. The flag will be set to false if the TOC save is | |
| // proven redundant. This function will erase from the basic block all the TOC | |
| // saves marked as redundant. | |
| bool PPCMIPeephole::eliminateRedundantTOCSaves( | |
| std::map<MachineInstr *, bool> &TOCSaves) { | |
| bool Simplified = false; | |
| int NumKept = 0; | |
| for (auto TOCSave : TOCSaves) { | |
| if (!TOCSave.second) { | |
| TOCSave.first->eraseFromParent(); | |
| RemoveTOCSave++; | |
| Simplified = true; | |
| } else { | |
| NumKept++; | |
| } | |
| } | |
| if (NumKept > 1) | |
| MultiTOCSaves++; | |
| return Simplified; | |
| } | |
| // If multiple conditional branches are executed based on the (essentially) | |
| // same comparison, we merge compare instructions into one and make multiple | |
| // conditional branches on this comparison. | |
| // For example, | |
| // if (a == 0) { ... } | |
| // else if (a < 0) { ... } | |
| // can be executed by one compare and two conditional branches instead of | |
| // two pairs of a compare and a conditional branch. | |
| // | |
| // This method merges two compare instructions in two MBBs and modifies the | |
| // compare and conditional branch instructions if needed. | |
| // For the above example, the input for this pass looks like: | |
| // cmplwi r3, 0 | |
| // beq 0, .LBB0_3 | |
| // cmpwi r3, -1 | |
| // bgt 0, .LBB0_4 | |
| // So, before merging two compares, we need to modify these instructions as | |
| // cmpwi r3, 0 ; cmplwi and cmpwi yield same result for beq | |
| // beq 0, .LBB0_3 | |
| // cmpwi r3, 0 ; greather than -1 means greater or equal to 0 | |
| // bge 0, .LBB0_4 | |
| bool PPCMIPeephole::eliminateRedundantCompare() { | |
| bool Simplified = false; | |
| for (MachineBasicBlock &MBB2 : *MF) { | |
| MachineBasicBlock *MBB1 = nullptr, *MBBtoMoveCmp = nullptr; | |
| // For fully redundant case, we select two basic blocks MBB1 and MBB2 | |
| // as an optimization target if | |
| // - both MBBs end with a conditional branch, | |
| // - MBB1 is the only predecessor of MBB2, and | |
| // - compare does not take a physical register as a operand in both MBBs. | |
| // In this case, eligibleForCompareElimination sets MBBtoMoveCmp nullptr. | |
| // | |
| // As partially redundant case, we additionally handle if MBB2 has one | |
| // additional predecessor, which has only one successor (MBB2). | |
| // In this case, we move the compare instruction originally in MBB2 into | |
| // MBBtoMoveCmp. This partially redundant case is typically appear by | |
| // compiling a while loop; here, MBBtoMoveCmp is the loop preheader. | |
| // | |
| // Overview of CFG of related basic blocks | |
| // Fully redundant case Partially redundant case | |
| // -------- ---------------- -------- | |
| // | MBB1 | (w/ 2 succ) | MBBtoMoveCmp | | MBB1 | (w/ 2 succ) | |
| // -------- ---------------- -------- | |
| // | \ (w/ 1 succ) \ | \ | |
| // | \ \ | \ | |
| // | \ | | |
| // -------- -------- | |
| // | MBB2 | (w/ 1 pred | MBB2 | (w/ 2 pred | |
| // -------- and 2 succ) -------- and 2 succ) | |
| // | \ | \ | |
| // | \ | \ | |
| // | |
| if (!eligibleForCompareElimination(MBB2, MBB1, MBBtoMoveCmp, MRI)) | |
| continue; | |
| MachineInstr *BI1 = &*MBB1->getFirstInstrTerminator(); | |
| MachineInstr *CMPI1 = MRI->getVRegDef(BI1->getOperand(1).getReg()); | |
| MachineInstr *BI2 = &*MBB2.getFirstInstrTerminator(); | |
| MachineInstr *CMPI2 = MRI->getVRegDef(BI2->getOperand(1).getReg()); | |
| bool IsPartiallyRedundant = (MBBtoMoveCmp != nullptr); | |
| // We cannot optimize an unsupported compare opcode or | |
| // a mix of 32-bit and 64-bit comparisons | |
| if (!isSupportedCmpOp(CMPI1->getOpcode()) || | |
| !isSupportedCmpOp(CMPI2->getOpcode()) || | |
| is64bitCmpOp(CMPI1->getOpcode()) != is64bitCmpOp(CMPI2->getOpcode())) | |
| continue; | |
| unsigned NewOpCode = 0; | |
| unsigned NewPredicate1 = 0, NewPredicate2 = 0; | |
| int16_t Imm1 = 0, NewImm1 = 0, Imm2 = 0, NewImm2 = 0; | |
| bool SwapOperands = false; | |
| if (CMPI1->getOpcode() != CMPI2->getOpcode()) { | |
| // Typically, unsigned comparison is used for equality check, but | |
| // we replace it with a signed comparison if the comparison | |
| // to be merged is a signed comparison. | |
| // In other cases of opcode mismatch, we cannot optimize this. | |
| // We cannot change opcode when comparing against an immediate | |
| // if the most significant bit of the immediate is one | |
| // due to the difference in sign extension. | |
| auto CmpAgainstImmWithSignBit = [](MachineInstr *I) { | |
| if (!I->getOperand(2).isImm()) | |
| return false; | |
| int16_t Imm = (int16_t)I->getOperand(2).getImm(); | |
| return Imm < 0; | |
| }; | |
| if (isEqOrNe(BI2) && !CmpAgainstImmWithSignBit(CMPI2) && | |
| CMPI1->getOpcode() == getSignedCmpOpCode(CMPI2->getOpcode())) | |
| NewOpCode = CMPI1->getOpcode(); | |
| else if (isEqOrNe(BI1) && !CmpAgainstImmWithSignBit(CMPI1) && | |
| getSignedCmpOpCode(CMPI1->getOpcode()) == CMPI2->getOpcode()) | |
| NewOpCode = CMPI2->getOpcode(); | |
| else continue; | |
| } | |
| if (CMPI1->getOperand(2).isReg() && CMPI2->getOperand(2).isReg()) { | |
| // In case of comparisons between two registers, these two registers | |
| // must be same to merge two comparisons. | |
| unsigned Cmp1Operand1 = getSrcVReg(CMPI1->getOperand(1).getReg(), | |
| nullptr, nullptr, MRI); | |
| unsigned Cmp1Operand2 = getSrcVReg(CMPI1->getOperand(2).getReg(), | |
| nullptr, nullptr, MRI); | |
| unsigned Cmp2Operand1 = getSrcVReg(CMPI2->getOperand(1).getReg(), | |
| MBB1, &MBB2, MRI); | |
| unsigned Cmp2Operand2 = getSrcVReg(CMPI2->getOperand(2).getReg(), | |
| MBB1, &MBB2, MRI); | |
| if (Cmp1Operand1 == Cmp2Operand1 && Cmp1Operand2 == Cmp2Operand2) { | |
| // Same pair of registers in the same order; ready to merge as is. | |
| } | |
| else if (Cmp1Operand1 == Cmp2Operand2 && Cmp1Operand2 == Cmp2Operand1) { | |
| // Same pair of registers in different order. | |
| // We reverse the predicate to merge compare instructions. | |
| PPC::Predicate Pred = (PPC::Predicate)BI2->getOperand(0).getImm(); | |
| NewPredicate2 = (unsigned)PPC::getSwappedPredicate(Pred); | |
| // In case of partial redundancy, we need to swap operands | |
| // in another compare instruction. | |
| SwapOperands = true; | |
| } | |
| else continue; | |
| } | |
| else if (CMPI1->getOperand(2).isImm() && CMPI2->getOperand(2).isImm()) { | |
| // In case of comparisons between a register and an immediate, | |
| // the operand register must be same for two compare instructions. | |
| unsigned Cmp1Operand1 = getSrcVReg(CMPI1->getOperand(1).getReg(), | |
| nullptr, nullptr, MRI); | |
| unsigned Cmp2Operand1 = getSrcVReg(CMPI2->getOperand(1).getReg(), | |
| MBB1, &MBB2, MRI); | |
| if (Cmp1Operand1 != Cmp2Operand1) | |
| continue; | |
| NewImm1 = Imm1 = (int16_t)CMPI1->getOperand(2).getImm(); | |
| NewImm2 = Imm2 = (int16_t)CMPI2->getOperand(2).getImm(); | |
| // If immediate are not same, we try to adjust by changing predicate; | |
| // e.g. GT imm means GE (imm+1). | |
| if (Imm1 != Imm2 && (!isEqOrNe(BI2) || !isEqOrNe(BI1))) { | |
| int Diff = Imm1 - Imm2; | |
| if (Diff < -2 || Diff > 2) | |
| continue; | |
| unsigned PredToInc1 = getPredicateToIncImm(BI1, CMPI1); | |
| unsigned PredToDec1 = getPredicateToDecImm(BI1, CMPI1); | |
| unsigned PredToInc2 = getPredicateToIncImm(BI2, CMPI2); | |
| unsigned PredToDec2 = getPredicateToDecImm(BI2, CMPI2); | |
| if (Diff == 2) { | |
| if (PredToInc2 && PredToDec1) { | |
| NewPredicate2 = PredToInc2; | |
| NewPredicate1 = PredToDec1; | |
| NewImm2++; | |
| NewImm1--; | |
| } | |
| } | |
| else if (Diff == 1) { | |
| if (PredToInc2) { | |
| NewImm2++; | |
| NewPredicate2 = PredToInc2; | |
| } | |
| else if (PredToDec1) { | |
| NewImm1--; | |
| NewPredicate1 = PredToDec1; | |
| } | |
| } | |
| else if (Diff == -1) { | |
| if (PredToDec2) { | |
| NewImm2--; | |
| NewPredicate2 = PredToDec2; | |
| } | |
| else if (PredToInc1) { | |
| NewImm1++; | |
| NewPredicate1 = PredToInc1; | |
| } | |
| } | |
| else if (Diff == -2) { | |
| if (PredToDec2 && PredToInc1) { | |
| NewPredicate2 = PredToDec2; | |
| NewPredicate1 = PredToInc1; | |
| NewImm2--; | |
| NewImm1++; | |
| } | |
| } | |
| } | |
| // We cannot merge two compares if the immediates are not same. | |
| if (NewImm2 != NewImm1) | |
| continue; | |
| } | |
| LLVM_DEBUG(dbgs() << "Optimize two pairs of compare and branch:\n"); | |
| LLVM_DEBUG(CMPI1->dump()); | |
| LLVM_DEBUG(BI1->dump()); | |
| LLVM_DEBUG(CMPI2->dump()); | |
| LLVM_DEBUG(BI2->dump()); | |
| // We adjust opcode, predicates and immediate as we determined above. | |
| if (NewOpCode != 0 && NewOpCode != CMPI1->getOpcode()) { | |
| CMPI1->setDesc(TII->get(NewOpCode)); | |
| } | |
| if (NewPredicate1) { | |
| BI1->getOperand(0).setImm(NewPredicate1); | |
| } | |
| if (NewPredicate2) { | |
| BI2->getOperand(0).setImm(NewPredicate2); | |
| } | |
| if (NewImm1 != Imm1) { | |
| CMPI1->getOperand(2).setImm(NewImm1); | |
| } | |
| if (IsPartiallyRedundant) { | |
| // We touch up the compare instruction in MBB2 and move it to | |
| // a previous BB to handle partially redundant case. | |
| if (SwapOperands) { | |
| Register Op1 = CMPI2->getOperand(1).getReg(); | |
| Register Op2 = CMPI2->getOperand(2).getReg(); | |
| CMPI2->getOperand(1).setReg(Op2); | |
| CMPI2->getOperand(2).setReg(Op1); | |
| } | |
| if (NewImm2 != Imm2) | |
| CMPI2->getOperand(2).setImm(NewImm2); | |
| for (int I = 1; I <= 2; I++) { | |
| if (CMPI2->getOperand(I).isReg()) { | |
| MachineInstr *Inst = MRI->getVRegDef(CMPI2->getOperand(I).getReg()); | |
| if (Inst->getParent() != &MBB2) | |
| continue; | |
| assert(Inst->getOpcode() == PPC::PHI && | |
| "We cannot support if an operand comes from this BB."); | |
| unsigned SrcReg = getIncomingRegForBlock(Inst, MBBtoMoveCmp); | |
| CMPI2->getOperand(I).setReg(SrcReg); | |
| } | |
| } | |
| auto I = MachineBasicBlock::iterator(MBBtoMoveCmp->getFirstTerminator()); | |
| MBBtoMoveCmp->splice(I, &MBB2, MachineBasicBlock::iterator(CMPI2)); | |
| DebugLoc DL = CMPI2->getDebugLoc(); | |
| Register NewVReg = MRI->createVirtualRegister(&PPC::CRRCRegClass); | |
| BuildMI(MBB2, MBB2.begin(), DL, | |
| TII->get(PPC::PHI), NewVReg) | |
| .addReg(BI1->getOperand(1).getReg()).addMBB(MBB1) | |
| .addReg(BI2->getOperand(1).getReg()).addMBB(MBBtoMoveCmp); | |
| BI2->getOperand(1).setReg(NewVReg); | |
| } | |
| else { | |
| // We finally eliminate compare instruction in MBB2. | |
| BI2->getOperand(1).setReg(BI1->getOperand(1).getReg()); | |
| CMPI2->eraseFromParent(); | |
| } | |
| BI2->getOperand(1).setIsKill(true); | |
| BI1->getOperand(1).setIsKill(false); | |
| LLVM_DEBUG(dbgs() << "into a compare and two branches:\n"); | |
| LLVM_DEBUG(CMPI1->dump()); | |
| LLVM_DEBUG(BI1->dump()); | |
| LLVM_DEBUG(BI2->dump()); | |
| if (IsPartiallyRedundant) { | |
| LLVM_DEBUG(dbgs() << "The following compare is moved into " | |
| << printMBBReference(*MBBtoMoveCmp) | |
| << " to handle partial redundancy.\n"); | |
| LLVM_DEBUG(CMPI2->dump()); | |
| } | |
| Simplified = true; | |
| } | |
| return Simplified; | |
| } | |
| // We miss the opportunity to emit an RLDIC when lowering jump tables | |
| // since ISEL sees only a single basic block. When selecting, the clear | |
| // and shift left will be in different blocks. | |
| bool PPCMIPeephole::emitRLDICWhenLoweringJumpTables(MachineInstr &MI) { | |
| if (MI.getOpcode() != PPC::RLDICR) | |
| return false; | |
| Register SrcReg = MI.getOperand(1).getReg(); | |
| if (!SrcReg.isVirtual()) | |
| return false; | |
| MachineInstr *SrcMI = MRI->getVRegDef(SrcReg); | |
| if (SrcMI->getOpcode() != PPC::RLDICL) | |
| return false; | |
| MachineOperand MOpSHSrc = SrcMI->getOperand(2); | |
| MachineOperand MOpMBSrc = SrcMI->getOperand(3); | |
| MachineOperand MOpSHMI = MI.getOperand(2); | |
| MachineOperand MOpMEMI = MI.getOperand(3); | |
| if (!(MOpSHSrc.isImm() && MOpMBSrc.isImm() && MOpSHMI.isImm() && | |
| MOpMEMI.isImm())) | |
| return false; | |
| uint64_t SHSrc = MOpSHSrc.getImm(); | |
| uint64_t MBSrc = MOpMBSrc.getImm(); | |
| uint64_t SHMI = MOpSHMI.getImm(); | |
| uint64_t MEMI = MOpMEMI.getImm(); | |
| uint64_t NewSH = SHSrc + SHMI; | |
| uint64_t NewMB = MBSrc - SHMI; | |
| if (NewMB > 63 || NewSH > 63) | |
| return false; | |
| // The bits cleared with RLDICL are [0, MBSrc). | |
| // The bits cleared with RLDICR are (MEMI, 63]. | |
| // After the sequence, the bits cleared are: | |
| // [0, MBSrc-SHMI) and (MEMI, 63). | |
| // | |
| // The bits cleared with RLDIC are [0, NewMB) and (63-NewSH, 63]. | |
| if ((63 - NewSH) != MEMI) | |
| return false; | |
| LLVM_DEBUG(dbgs() << "Converting pair: "); | |
| LLVM_DEBUG(SrcMI->dump()); | |
| LLVM_DEBUG(MI.dump()); | |
| MI.setDesc(TII->get(PPC::RLDIC)); | |
| MI.getOperand(1).setReg(SrcMI->getOperand(1).getReg()); | |
| MI.getOperand(2).setImm(NewSH); | |
| MI.getOperand(3).setImm(NewMB); | |
| MI.getOperand(1).setIsKill(SrcMI->getOperand(1).isKill()); | |
| SrcMI->getOperand(1).setIsKill(false); | |
| LLVM_DEBUG(dbgs() << "To: "); | |
| LLVM_DEBUG(MI.dump()); | |
| NumRotatesCollapsed++; | |
| // If SrcReg has no non-debug use it's safe to delete its def SrcMI. | |
| if (MRI->use_nodbg_empty(SrcReg)) { | |
| assert(!SrcMI->hasImplicitDef() && | |
| "Not expecting an implicit def with this instr."); | |
| SrcMI->eraseFromParent(); | |
| } | |
| return true; | |
| } | |
| // For case in LLVM IR | |
| // entry: | |
| // %iconv = sext i32 %index to i64 | |
| // br i1 undef label %true, label %false | |
| // true: | |
| // %ptr = getelementptr inbounds i32, i32* null, i64 %iconv | |
| // ... | |
| // PPCISelLowering::combineSHL fails to combine, because sext and shl are in | |
| // different BBs when conducting instruction selection. We can do a peephole | |
| // optimization to combine these two instructions into extswsli after | |
| // instruction selection. | |
| bool PPCMIPeephole::combineSEXTAndSHL(MachineInstr &MI, | |
| MachineInstr *&ToErase) { | |
| if (MI.getOpcode() != PPC::RLDICR) | |
| return false; | |
| if (!MF->getSubtarget<PPCSubtarget>().isISA3_0()) | |
| return false; | |
| assert(MI.getNumOperands() == 4 && "RLDICR should have 4 operands"); | |
| MachineOperand MOpSHMI = MI.getOperand(2); | |
| MachineOperand MOpMEMI = MI.getOperand(3); | |
| if (!(MOpSHMI.isImm() && MOpMEMI.isImm())) | |
| return false; | |
| uint64_t SHMI = MOpSHMI.getImm(); | |
| uint64_t MEMI = MOpMEMI.getImm(); | |
| if (SHMI + MEMI != 63) | |
| return false; | |
| Register SrcReg = MI.getOperand(1).getReg(); | |
| if (!SrcReg.isVirtual()) | |
| return false; | |
| MachineInstr *SrcMI = MRI->getVRegDef(SrcReg); | |
| if (SrcMI->getOpcode() != PPC::EXTSW && | |
| SrcMI->getOpcode() != PPC::EXTSW_32_64) | |
| return false; | |
| // If the register defined by extsw has more than one use, combination is not | |
| // needed. | |
| if (!MRI->hasOneNonDBGUse(SrcReg)) | |
| return false; | |
| assert(SrcMI->getNumOperands() == 2 && "EXTSW should have 2 operands"); | |
| assert(SrcMI->getOperand(1).isReg() && | |
| "EXTSW's second operand should be a register"); | |
| if (!SrcMI->getOperand(1).getReg().isVirtual()) | |
| return false; | |
| LLVM_DEBUG(dbgs() << "Combining pair: "); | |
| LLVM_DEBUG(SrcMI->dump()); | |
| LLVM_DEBUG(MI.dump()); | |
| MachineInstr *NewInstr = | |
| BuildMI(*MI.getParent(), &MI, MI.getDebugLoc(), | |
| SrcMI->getOpcode() == PPC::EXTSW ? TII->get(PPC::EXTSWSLI) | |
| : TII->get(PPC::EXTSWSLI_32_64), | |
| MI.getOperand(0).getReg()) | |
| .add(SrcMI->getOperand(1)) | |
| .add(MOpSHMI); | |
| (void)NewInstr; | |
| LLVM_DEBUG(dbgs() << "TO: "); | |
| LLVM_DEBUG(NewInstr->dump()); | |
| ++NumEXTSWAndSLDICombined; | |
| ToErase = &MI; | |
| // SrcMI, which is extsw, is of no use now, erase it. | |
| SrcMI->eraseFromParent(); | |
| return true; | |
| } | |
| } // end default namespace | |
| INITIALIZE_PASS_BEGIN(PPCMIPeephole, DEBUG_TYPE, | |
| "PowerPC MI Peephole Optimization", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(MachineBlockFrequencyInfo) | |
| INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree) | |
| INITIALIZE_PASS_DEPENDENCY(MachinePostDominatorTree) | |
| INITIALIZE_PASS_END(PPCMIPeephole, DEBUG_TYPE, | |
| "PowerPC MI Peephole Optimization", false, false) | |
| char PPCMIPeephole::ID = 0; | |
| FunctionPass* | |
| llvm::createPPCMIPeepholePass() { return new PPCMIPeephole(); } |