| // SPDX-License-Identifier: Apache-2.0 | |
| // ---------------------------------------------------------------------------- | |
| // Copyright 2011-2020 Arm Limited | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); you may not | |
| // use this file except in compliance with the License. You may obtain a copy | |
| // of the License at: | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |
| // WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the | |
| // License for the specific language governing permissions and limitations | |
| // under the License. | |
| // ---------------------------------------------------------------------------- | |
| /** | |
| * @brief Functions for converting between symbolic and physical encodings. | |
| */ | |
| #include "astc_codec_internals.h" | |
| // routine to read up to 8 bits | |
| static inline int read_bits( | |
| int bitcount, | |
| int bitoffset, | |
| const uint8_t* ptr | |
| ) { | |
| int mask = (1 << bitcount) - 1; | |
| ptr += bitoffset >> 3; | |
| bitoffset &= 7; | |
| int value = ptr[0] | (ptr[1] << 8); | |
| value >>= bitoffset; | |
| value &= mask; | |
| return value; | |
| } | |
| static inline int bitrev8(int p) | |
| { | |
| p = ((p & 0xF) << 4) | ((p >> 4) & 0xF); | |
| p = ((p & 0x33) << 2) | ((p >> 2) & 0x33); | |
| p = ((p & 0x55) << 1) | ((p >> 1) & 0x55); | |
| return p; | |
| } | |
| void physical_to_symbolic( | |
| const block_size_descriptor* bsd, | |
| physical_compressed_block pb, | |
| symbolic_compressed_block* res | |
| ) { | |
| uint8_t bswapped[16]; | |
| int i, j; | |
| res->error_block = 0; | |
| // get hold of the decimation tables. | |
| const decimation_table *const *ixtab2 = bsd->decimation_tables; | |
| // extract header fields | |
| int block_mode = read_bits(11, 0, pb.data); | |
| if ((block_mode & 0x1FF) == 0x1FC) | |
| { | |
| // void-extent block! | |
| // check what format the data has | |
| if (block_mode & 0x200) | |
| res->block_mode = -1; // floating-point | |
| else | |
| res->block_mode = -2; // unorm16. | |
| res->partition_count = 0; | |
| for (i = 0; i < 4; i++) | |
| { | |
| res->constant_color[i] = pb.data[2 * i + 8] | (pb.data[2 * i + 9] << 8); | |
| } | |
| // additionally, check that the void-extent | |
| if (bsd->zdim == 1) | |
| { | |
| // 2D void-extent | |
| int rsvbits = read_bits(2, 10, pb.data); | |
| if (rsvbits != 3) | |
| res->error_block = 1; | |
| int vx_low_s = read_bits(8, 12, pb.data) | (read_bits(5, 12 + 8, pb.data) << 8); | |
| int vx_high_s = read_bits(8, 25, pb.data) | (read_bits(5, 25 + 8, pb.data) << 8); | |
| int vx_low_t = read_bits(8, 38, pb.data) | (read_bits(5, 38 + 8, pb.data) << 8); | |
| int vx_high_t = read_bits(8, 51, pb.data) | (read_bits(5, 51 + 8, pb.data) << 8); | |
| int all_ones = vx_low_s == 0x1FFF && vx_high_s == 0x1FFF && vx_low_t == 0x1FFF && vx_high_t == 0x1FFF; | |
| if ((vx_low_s >= vx_high_s || vx_low_t >= vx_high_t) && !all_ones) | |
| res->error_block = 1; | |
| } | |
| else | |
| { | |
| // 3D void-extent | |
| int vx_low_s = read_bits(9, 10, pb.data); | |
| int vx_high_s = read_bits(9, 19, pb.data); | |
| int vx_low_t = read_bits(9, 28, pb.data); | |
| int vx_high_t = read_bits(9, 37, pb.data); | |
| int vx_low_p = read_bits(9, 46, pb.data); | |
| int vx_high_p = read_bits(9, 55, pb.data); | |
| int all_ones = vx_low_s == 0x1FF && vx_high_s == 0x1FF && vx_low_t == 0x1FF && vx_high_t == 0x1FF && vx_low_p == 0x1FF && vx_high_p == 0x1FF; | |
| if ((vx_low_s >= vx_high_s || vx_low_t >= vx_high_t || vx_low_p >= vx_high_p) && !all_ones) | |
| res->error_block = 1; | |
| } | |
| return; | |
| } | |
| if (bsd->block_modes[block_mode].permit_decode == 0) | |
| { | |
| res->error_block = 1; | |
| return; | |
| } | |
| int weight_count = ixtab2[bsd->block_modes[block_mode].decimation_mode]->num_weights; | |
| int weight_quantization_method = bsd->block_modes[block_mode].quantization_mode; | |
| int is_dual_plane = bsd->block_modes[block_mode].is_dual_plane; | |
| int real_weight_count = is_dual_plane ? 2 * weight_count : weight_count; | |
| int partition_count = read_bits(2, 11, pb.data) + 1; | |
| res->block_mode = block_mode; | |
| res->partition_count = partition_count; | |
| for (i = 0; i < 16; i++) | |
| bswapped[i] = bitrev8(pb.data[15 - i]); | |
| int bits_for_weights = compute_ise_bitcount(real_weight_count, | |
| (quantization_method) weight_quantization_method); | |
| int below_weights_pos = 128 - bits_for_weights; | |
| if (is_dual_plane) | |
| { | |
| uint8_t indices[64]; | |
| decode_ise(weight_quantization_method, real_weight_count, bswapped, indices, 0); | |
| for (i = 0; i < weight_count; i++) | |
| { | |
| res->plane1_weights[i] = indices[2 * i]; | |
| res->plane2_weights[i] = indices[2 * i + 1]; | |
| } | |
| } | |
| else | |
| { | |
| decode_ise(weight_quantization_method, weight_count, bswapped, res->plane1_weights, 0); | |
| } | |
| if (is_dual_plane && partition_count == 4) | |
| res->error_block = 1; | |
| res->color_formats_matched = 0; | |
| // then, determine the format of each endpoint pair | |
| int color_formats[4]; | |
| int encoded_type_highpart_size = 0; | |
| if (partition_count == 1) | |
| { | |
| color_formats[0] = read_bits(4, 13, pb.data); | |
| res->partition_index = 0; | |
| } | |
| else | |
| { | |
| encoded_type_highpart_size = (3 * partition_count) - 4; | |
| below_weights_pos -= encoded_type_highpart_size; | |
| int encoded_type = read_bits(6, 13 + PARTITION_BITS, pb.data) | (read_bits(encoded_type_highpart_size, below_weights_pos, pb.data) << 6); | |
| int baseclass = encoded_type & 0x3; | |
| if (baseclass == 0) | |
| { | |
| for (i = 0; i < partition_count; i++) | |
| { | |
| color_formats[i] = (encoded_type >> 2) & 0xF; | |
| } | |
| below_weights_pos += encoded_type_highpart_size; | |
| res->color_formats_matched = 1; | |
| encoded_type_highpart_size = 0; | |
| } | |
| else | |
| { | |
| int bitpos = 2; | |
| baseclass--; | |
| for (i = 0; i < partition_count; i++) | |
| { | |
| color_formats[i] = (((encoded_type >> bitpos) & 1) + baseclass) << 2; | |
| bitpos++; | |
| } | |
| for (i = 0; i < partition_count; i++) | |
| { | |
| color_formats[i] |= (encoded_type >> bitpos) & 3; | |
| bitpos += 2; | |
| } | |
| } | |
| res->partition_index = read_bits(6, 13, pb.data) | (read_bits(PARTITION_BITS - 6, 19, pb.data) << 6); | |
| } | |
| for (i = 0; i < partition_count; i++) | |
| res->color_formats[i] = color_formats[i]; | |
| // then, determine the number of integers we need to unpack for the endpoint pairs | |
| int color_integer_count = 0; | |
| for (i = 0; i < partition_count; i++) | |
| { | |
| int endpoint_class = color_formats[i] >> 2; | |
| color_integer_count += (endpoint_class + 1) * 2; | |
| } | |
| if (color_integer_count > 18) | |
| res->error_block = 1; | |
| // then, determine the color endpoint format to use for these integers | |
| static const int color_bits_arr[5] = { -1, 115 - 4, 113 - 4 - PARTITION_BITS, 113 - 4 - PARTITION_BITS, 113 - 4 - PARTITION_BITS }; | |
| int color_bits = color_bits_arr[partition_count] - bits_for_weights - encoded_type_highpart_size; | |
| if (is_dual_plane) | |
| color_bits -= 2; | |
| if (color_bits < 0) | |
| color_bits = 0; | |
| int color_quantization_level = quantization_mode_table[color_integer_count >> 1][color_bits]; | |
| res->color_quantization_level = color_quantization_level; | |
| if (color_quantization_level < 4) | |
| res->error_block = 1; | |
| // then unpack the integer-bits | |
| uint8_t values_to_decode[32]; | |
| decode_ise(color_quantization_level, color_integer_count, pb.data, values_to_decode, (partition_count == 1 ? 17 : 19 + PARTITION_BITS)); | |
| // and distribute them over the endpoint types | |
| int valuecount_to_decode = 0; | |
| for (i = 0; i < partition_count; i++) | |
| { | |
| int vals = 2 * (color_formats[i] >> 2) + 2; | |
| for (j = 0; j < vals; j++) | |
| res->color_values[i][j] = values_to_decode[j + valuecount_to_decode]; | |
| valuecount_to_decode += vals; | |
| } | |
| // get hold of color component for second-plane in the case of dual plane of weights. | |
| if (is_dual_plane) | |
| res->plane2_color_component = read_bits(2, below_weights_pos - 2, pb.data); | |
| } |