| //===- InstCombineCalls.cpp -----------------------------------------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements the visitCall and visitInvoke functions. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "InstCombine.h" | |
| #include "llvm/Support/CallSite.h" | |
| #include "llvm/Target/TargetData.h" | |
| #include "llvm/Analysis/MemoryBuiltins.h" | |
| #include "llvm/Transforms/Utils/BuildLibCalls.h" | |
| #include "llvm/Transforms/Utils/Local.h" | |
| using namespace llvm; | |
| /// getPromotedType - Return the specified type promoted as it would be to pass | |
| /// though a va_arg area. | |
| static Type *getPromotedType(Type *Ty) { | |
| if (IntegerType* ITy = dyn_cast<IntegerType>(Ty)) { | |
| if (ITy->getBitWidth() < 32) | |
| return Type::getInt32Ty(Ty->getContext()); | |
| } | |
| return Ty; | |
| } | |
| Instruction *InstCombiner::SimplifyMemTransfer(MemIntrinsic *MI) { | |
| unsigned DstAlign = getKnownAlignment(MI->getArgOperand(0), TD); | |
| unsigned SrcAlign = getKnownAlignment(MI->getArgOperand(1), TD); | |
| unsigned MinAlign = std::min(DstAlign, SrcAlign); | |
| unsigned CopyAlign = MI->getAlignment(); | |
| if (CopyAlign < MinAlign) { | |
| MI->setAlignment(ConstantInt::get(MI->getAlignmentType(), | |
| MinAlign, false)); | |
| return MI; | |
| } | |
| // If MemCpyInst length is 1/2/4/8 bytes then replace memcpy with | |
| // load/store. | |
| ConstantInt *MemOpLength = dyn_cast<ConstantInt>(MI->getArgOperand(2)); | |
| if (MemOpLength == 0) return 0; | |
| // Source and destination pointer types are always "i8*" for intrinsic. See | |
| // if the size is something we can handle with a single primitive load/store. | |
| // A single load+store correctly handles overlapping memory in the memmove | |
| // case. | |
| unsigned Size = MemOpLength->getZExtValue(); | |
| if (Size == 0) return MI; // Delete this mem transfer. | |
| if (Size > 8 || (Size&(Size-1))) | |
| return 0; // If not 1/2/4/8 bytes, exit. | |
| // Use an integer load+store unless we can find something better. | |
| unsigned SrcAddrSp = | |
| cast<PointerType>(MI->getArgOperand(1)->getType())->getAddressSpace(); | |
| unsigned DstAddrSp = | |
| cast<PointerType>(MI->getArgOperand(0)->getType())->getAddressSpace(); | |
| IntegerType* IntType = IntegerType::get(MI->getContext(), Size<<3); | |
| Type *NewSrcPtrTy = PointerType::get(IntType, SrcAddrSp); | |
| Type *NewDstPtrTy = PointerType::get(IntType, DstAddrSp); | |
| // Memcpy forces the use of i8* for the source and destination. That means | |
| // that if you're using memcpy to move one double around, you'll get a cast | |
| // from double* to i8*. We'd much rather use a double load+store rather than | |
| // an i64 load+store, here because this improves the odds that the source or | |
| // dest address will be promotable. See if we can find a better type than the | |
| // integer datatype. | |
| Value *StrippedDest = MI->getArgOperand(0)->stripPointerCasts(); | |
| if (StrippedDest != MI->getArgOperand(0)) { | |
| Type *SrcETy = cast<PointerType>(StrippedDest->getType()) | |
| ->getElementType(); | |
| if (TD && SrcETy->isSized() && TD->getTypeStoreSize(SrcETy) == Size) { | |
| // The SrcETy might be something like {{{double}}} or [1 x double]. Rip | |
| // down through these levels if so. | |
| while (!SrcETy->isSingleValueType()) { | |
| if (StructType *STy = dyn_cast<StructType>(SrcETy)) { | |
| if (STy->getNumElements() == 1) | |
| SrcETy = STy->getElementType(0); | |
| else | |
| break; | |
| } else if (ArrayType *ATy = dyn_cast<ArrayType>(SrcETy)) { | |
| if (ATy->getNumElements() == 1) | |
| SrcETy = ATy->getElementType(); | |
| else | |
| break; | |
| } else | |
| break; | |
| } | |
| if (SrcETy->isSingleValueType()) { | |
| NewSrcPtrTy = PointerType::get(SrcETy, SrcAddrSp); | |
| NewDstPtrTy = PointerType::get(SrcETy, DstAddrSp); | |
| } | |
| } | |
| } | |
| // If the memcpy/memmove provides better alignment info than we can | |
| // infer, use it. | |
| SrcAlign = std::max(SrcAlign, CopyAlign); | |
| DstAlign = std::max(DstAlign, CopyAlign); | |
| Value *Src = Builder->CreateBitCast(MI->getArgOperand(1), NewSrcPtrTy); | |
| Value *Dest = Builder->CreateBitCast(MI->getArgOperand(0), NewDstPtrTy); | |
| LoadInst *L = Builder->CreateLoad(Src, MI->isVolatile()); | |
| L->setAlignment(SrcAlign); | |
| StoreInst *S = Builder->CreateStore(L, Dest, MI->isVolatile()); | |
| S->setAlignment(DstAlign); | |
| // Set the size of the copy to 0, it will be deleted on the next iteration. | |
| MI->setArgOperand(2, Constant::getNullValue(MemOpLength->getType())); | |
| return MI; | |
| } | |
| Instruction *InstCombiner::SimplifyMemSet(MemSetInst *MI) { | |
| unsigned Alignment = getKnownAlignment(MI->getDest(), TD); | |
| if (MI->getAlignment() < Alignment) { | |
| MI->setAlignment(ConstantInt::get(MI->getAlignmentType(), | |
| Alignment, false)); | |
| return MI; | |
| } | |
| // Extract the length and alignment and fill if they are constant. | |
| ConstantInt *LenC = dyn_cast<ConstantInt>(MI->getLength()); | |
| ConstantInt *FillC = dyn_cast<ConstantInt>(MI->getValue()); | |
| if (!LenC || !FillC || !FillC->getType()->isIntegerTy(8)) | |
| return 0; | |
| uint64_t Len = LenC->getZExtValue(); | |
| Alignment = MI->getAlignment(); | |
| // If the length is zero, this is a no-op | |
| if (Len == 0) return MI; // memset(d,c,0,a) -> noop | |
| // memset(s,c,n) -> store s, c (for n=1,2,4,8) | |
| if (Len <= 8 && isPowerOf2_32((uint32_t)Len)) { | |
| Type *ITy = IntegerType::get(MI->getContext(), Len*8); // n=1 -> i8. | |
| Value *Dest = MI->getDest(); | |
| unsigned DstAddrSp = cast<PointerType>(Dest->getType())->getAddressSpace(); | |
| Type *NewDstPtrTy = PointerType::get(ITy, DstAddrSp); | |
| Dest = Builder->CreateBitCast(Dest, NewDstPtrTy); | |
| // Alignment 0 is identity for alignment 1 for memset, but not store. | |
| if (Alignment == 0) Alignment = 1; | |
| // Extract the fill value and store. | |
| uint64_t Fill = FillC->getZExtValue()*0x0101010101010101ULL; | |
| StoreInst *S = Builder->CreateStore(ConstantInt::get(ITy, Fill), Dest, | |
| MI->isVolatile()); | |
| S->setAlignment(Alignment); | |
| // Set the size of the copy to 0, it will be deleted on the next iteration. | |
| MI->setLength(Constant::getNullValue(LenC->getType())); | |
| return MI; | |
| } | |
| return 0; | |
| } | |
| /// visitCallInst - CallInst simplification. This mostly only handles folding | |
| /// of intrinsic instructions. For normal calls, it allows visitCallSite to do | |
| /// the heavy lifting. | |
| /// | |
| Instruction *InstCombiner::visitCallInst(CallInst &CI) { | |
| if (isFreeCall(&CI)) | |
| return visitFree(CI); | |
| if (isMalloc(&CI)) | |
| return visitMalloc(CI); | |
| // If the caller function is nounwind, mark the call as nounwind, even if the | |
| // callee isn't. | |
| if (CI.getParent()->getParent()->doesNotThrow() && | |
| !CI.doesNotThrow()) { | |
| CI.setDoesNotThrow(); | |
| return &CI; | |
| } | |
| IntrinsicInst *II = dyn_cast<IntrinsicInst>(&CI); | |
| if (!II) return visitCallSite(&CI); | |
| // Intrinsics cannot occur in an invoke, so handle them here instead of in | |
| // visitCallSite. | |
| if (MemIntrinsic *MI = dyn_cast<MemIntrinsic>(II)) { | |
| bool Changed = false; | |
| // memmove/cpy/set of zero bytes is a noop. | |
| if (Constant *NumBytes = dyn_cast<Constant>(MI->getLength())) { | |
| if (NumBytes->isNullValue()) | |
| return EraseInstFromFunction(CI); | |
| if (ConstantInt *CI = dyn_cast<ConstantInt>(NumBytes)) | |
| if (CI->getZExtValue() == 1) { | |
| // Replace the instruction with just byte operations. We would | |
| // transform other cases to loads/stores, but we don't know if | |
| // alignment is sufficient. | |
| } | |
| } | |
| // No other transformations apply to volatile transfers. | |
| if (MI->isVolatile()) | |
| return 0; | |
| // If we have a memmove and the source operation is a constant global, | |
| // then the source and dest pointers can't alias, so we can change this | |
| // into a call to memcpy. | |
| if (MemMoveInst *MMI = dyn_cast<MemMoveInst>(MI)) { | |
| if (GlobalVariable *GVSrc = dyn_cast<GlobalVariable>(MMI->getSource())) | |
| if (GVSrc->isConstant()) { | |
| Module *M = CI.getParent()->getParent()->getParent(); | |
| Intrinsic::ID MemCpyID = Intrinsic::memcpy; | |
| Type *Tys[3] = { CI.getArgOperand(0)->getType(), | |
| CI.getArgOperand(1)->getType(), | |
| CI.getArgOperand(2)->getType() }; | |
| CI.setCalledFunction(Intrinsic::getDeclaration(M, MemCpyID, Tys)); | |
| Changed = true; | |
| } | |
| } | |
| if (MemTransferInst *MTI = dyn_cast<MemTransferInst>(MI)) { | |
| // memmove(x,x,size) -> noop. | |
| if (MTI->getSource() == MTI->getDest()) | |
| return EraseInstFromFunction(CI); | |
| } | |
| // If we can determine a pointer alignment that is bigger than currently | |
| // set, update the alignment. | |
| if (isa<MemTransferInst>(MI)) { | |
| if (Instruction *I = SimplifyMemTransfer(MI)) | |
| return I; | |
| } else if (MemSetInst *MSI = dyn_cast<MemSetInst>(MI)) { | |
| if (Instruction *I = SimplifyMemSet(MSI)) | |
| return I; | |
| } | |
| if (Changed) return II; | |
| } | |
| switch (II->getIntrinsicID()) { | |
| default: break; | |
| case Intrinsic::objectsize: { | |
| // We need target data for just about everything so depend on it. | |
| if (!TD) break; | |
| Type *ReturnTy = CI.getType(); | |
| uint64_t DontKnow = II->getArgOperand(1) == Builder->getTrue() ? 0 : -1ULL; | |
| // Get to the real allocated thing and offset as fast as possible. | |
| Value *Op1 = II->getArgOperand(0)->stripPointerCasts(); | |
| uint64_t Offset = 0; | |
| uint64_t Size = -1ULL; | |
| // Try to look through constant GEPs. | |
| if (GEPOperator *GEP = dyn_cast<GEPOperator>(Op1)) { | |
| if (!GEP->hasAllConstantIndices()) break; | |
| // Get the current byte offset into the thing. Use the original | |
| // operand in case we're looking through a bitcast. | |
| SmallVector<Value*, 8> Ops(GEP->idx_begin(), GEP->idx_end()); | |
| Offset = TD->getIndexedOffset(GEP->getPointerOperandType(), Ops); | |
| Op1 = GEP->getPointerOperand()->stripPointerCasts(); | |
| // Make sure we're not a constant offset from an external | |
| // global. | |
| if (GlobalVariable *GV = dyn_cast<GlobalVariable>(Op1)) | |
| if (!GV->hasDefinitiveInitializer()) break; | |
| } | |
| // If we've stripped down to a single global variable that we | |
| // can know the size of then just return that. | |
| if (GlobalVariable *GV = dyn_cast<GlobalVariable>(Op1)) { | |
| if (GV->hasDefinitiveInitializer()) { | |
| Constant *C = GV->getInitializer(); | |
| Size = TD->getTypeAllocSize(C->getType()); | |
| } else { | |
| // Can't determine size of the GV. | |
| Constant *RetVal = ConstantInt::get(ReturnTy, DontKnow); | |
| return ReplaceInstUsesWith(CI, RetVal); | |
| } | |
| } else if (AllocaInst *AI = dyn_cast<AllocaInst>(Op1)) { | |
| // Get alloca size. | |
| if (AI->getAllocatedType()->isSized()) { | |
| Size = TD->getTypeAllocSize(AI->getAllocatedType()); | |
| if (AI->isArrayAllocation()) { | |
| const ConstantInt *C = dyn_cast<ConstantInt>(AI->getArraySize()); | |
| if (!C) break; | |
| Size *= C->getZExtValue(); | |
| } | |
| } | |
| } else if (CallInst *MI = extractMallocCall(Op1)) { | |
| // Get allocation size. | |
| Type* MallocType = getMallocAllocatedType(MI); | |
| if (MallocType && MallocType->isSized()) | |
| if (Value *NElems = getMallocArraySize(MI, TD, true)) | |
| if (ConstantInt *NElements = dyn_cast<ConstantInt>(NElems)) | |
| Size = NElements->getZExtValue() * TD->getTypeAllocSize(MallocType); | |
| } | |
| // Do not return "I don't know" here. Later optimization passes could | |
| // make it possible to evaluate objectsize to a constant. | |
| if (Size == -1ULL) | |
| break; | |
| if (Size < Offset) { | |
| // Out of bound reference? Negative index normalized to large | |
| // index? Just return "I don't know". | |
| return ReplaceInstUsesWith(CI, ConstantInt::get(ReturnTy, DontKnow)); | |
| } | |
| return ReplaceInstUsesWith(CI, ConstantInt::get(ReturnTy, Size-Offset)); | |
| } | |
| case Intrinsic::bswap: | |
| // bswap(bswap(x)) -> x | |
| if (IntrinsicInst *Operand = dyn_cast<IntrinsicInst>(II->getArgOperand(0))) | |
| if (Operand->getIntrinsicID() == Intrinsic::bswap) | |
| return ReplaceInstUsesWith(CI, Operand->getArgOperand(0)); | |
| // bswap(trunc(bswap(x))) -> trunc(lshr(x, c)) | |
| if (TruncInst *TI = dyn_cast<TruncInst>(II->getArgOperand(0))) { | |
| if (IntrinsicInst *Operand = dyn_cast<IntrinsicInst>(TI->getOperand(0))) | |
| if (Operand->getIntrinsicID() == Intrinsic::bswap) { | |
| unsigned C = Operand->getType()->getPrimitiveSizeInBits() - | |
| TI->getType()->getPrimitiveSizeInBits(); | |
| Value *CV = ConstantInt::get(Operand->getType(), C); | |
| Value *V = Builder->CreateLShr(Operand->getArgOperand(0), CV); | |
| return new TruncInst(V, TI->getType()); | |
| } | |
| } | |
| break; | |
| case Intrinsic::powi: | |
| if (ConstantInt *Power = dyn_cast<ConstantInt>(II->getArgOperand(1))) { | |
| // powi(x, 0) -> 1.0 | |
| if (Power->isZero()) | |
| return ReplaceInstUsesWith(CI, ConstantFP::get(CI.getType(), 1.0)); | |
| // powi(x, 1) -> x | |
| if (Power->isOne()) | |
| return ReplaceInstUsesWith(CI, II->getArgOperand(0)); | |
| // powi(x, -1) -> 1/x | |
| if (Power->isAllOnesValue()) | |
| return BinaryOperator::CreateFDiv(ConstantFP::get(CI.getType(), 1.0), | |
| II->getArgOperand(0)); | |
| } | |
| break; | |
| case Intrinsic::cttz: { | |
| // If all bits below the first known one are known zero, | |
| // this value is constant. | |
| IntegerType *IT = dyn_cast<IntegerType>(II->getArgOperand(0)->getType()); | |
| // FIXME: Try to simplify vectors of integers. | |
| if (!IT) break; | |
| uint32_t BitWidth = IT->getBitWidth(); | |
| APInt KnownZero(BitWidth, 0); | |
| APInt KnownOne(BitWidth, 0); | |
| ComputeMaskedBits(II->getArgOperand(0), APInt::getAllOnesValue(BitWidth), | |
| KnownZero, KnownOne); | |
| unsigned TrailingZeros = KnownOne.countTrailingZeros(); | |
| APInt Mask(APInt::getLowBitsSet(BitWidth, TrailingZeros)); | |
| if ((Mask & KnownZero) == Mask) | |
| return ReplaceInstUsesWith(CI, ConstantInt::get(IT, | |
| APInt(BitWidth, TrailingZeros))); | |
| } | |
| break; | |
| case Intrinsic::ctlz: { | |
| // If all bits above the first known one are known zero, | |
| // this value is constant. | |
| IntegerType *IT = dyn_cast<IntegerType>(II->getArgOperand(0)->getType()); | |
| // FIXME: Try to simplify vectors of integers. | |
| if (!IT) break; | |
| uint32_t BitWidth = IT->getBitWidth(); | |
| APInt KnownZero(BitWidth, 0); | |
| APInt KnownOne(BitWidth, 0); | |
| ComputeMaskedBits(II->getArgOperand(0), APInt::getAllOnesValue(BitWidth), | |
| KnownZero, KnownOne); | |
| unsigned LeadingZeros = KnownOne.countLeadingZeros(); | |
| APInt Mask(APInt::getHighBitsSet(BitWidth, LeadingZeros)); | |
| if ((Mask & KnownZero) == Mask) | |
| return ReplaceInstUsesWith(CI, ConstantInt::get(IT, | |
| APInt(BitWidth, LeadingZeros))); | |
| } | |
| break; | |
| case Intrinsic::uadd_with_overflow: { | |
| Value *LHS = II->getArgOperand(0), *RHS = II->getArgOperand(1); | |
| IntegerType *IT = cast<IntegerType>(II->getArgOperand(0)->getType()); | |
| uint32_t BitWidth = IT->getBitWidth(); | |
| APInt Mask = APInt::getSignBit(BitWidth); | |
| APInt LHSKnownZero(BitWidth, 0); | |
| APInt LHSKnownOne(BitWidth, 0); | |
| ComputeMaskedBits(LHS, Mask, LHSKnownZero, LHSKnownOne); | |
| bool LHSKnownNegative = LHSKnownOne[BitWidth - 1]; | |
| bool LHSKnownPositive = LHSKnownZero[BitWidth - 1]; | |
| if (LHSKnownNegative || LHSKnownPositive) { | |
| APInt RHSKnownZero(BitWidth, 0); | |
| APInt RHSKnownOne(BitWidth, 0); | |
| ComputeMaskedBits(RHS, Mask, RHSKnownZero, RHSKnownOne); | |
| bool RHSKnownNegative = RHSKnownOne[BitWidth - 1]; | |
| bool RHSKnownPositive = RHSKnownZero[BitWidth - 1]; | |
| if (LHSKnownNegative && RHSKnownNegative) { | |
| // The sign bit is set in both cases: this MUST overflow. | |
| // Create a simple add instruction, and insert it into the struct. | |
| Value *Add = Builder->CreateAdd(LHS, RHS); | |
| Add->takeName(&CI); | |
| Constant *V[] = { | |
| UndefValue::get(LHS->getType()), | |
| ConstantInt::getTrue(II->getContext()) | |
| }; | |
| StructType *ST = cast<StructType>(II->getType()); | |
| Constant *Struct = ConstantStruct::get(ST, V); | |
| return InsertValueInst::Create(Struct, Add, 0); | |
| } | |
| if (LHSKnownPositive && RHSKnownPositive) { | |
| // The sign bit is clear in both cases: this CANNOT overflow. | |
| // Create a simple add instruction, and insert it into the struct. | |
| Value *Add = Builder->CreateNUWAdd(LHS, RHS); | |
| Add->takeName(&CI); | |
| Constant *V[] = { | |
| UndefValue::get(LHS->getType()), | |
| ConstantInt::getFalse(II->getContext()) | |
| }; | |
| StructType *ST = cast<StructType>(II->getType()); | |
| Constant *Struct = ConstantStruct::get(ST, V); | |
| return InsertValueInst::Create(Struct, Add, 0); | |
| } | |
| } | |
| } | |
| // FALL THROUGH uadd into sadd | |
| case Intrinsic::sadd_with_overflow: | |
| // Canonicalize constants into the RHS. | |
| if (isa<Constant>(II->getArgOperand(0)) && | |
| !isa<Constant>(II->getArgOperand(1))) { | |
| Value *LHS = II->getArgOperand(0); | |
| II->setArgOperand(0, II->getArgOperand(1)); | |
| II->setArgOperand(1, LHS); | |
| return II; | |
| } | |
| // X + undef -> undef | |
| if (isa<UndefValue>(II->getArgOperand(1))) | |
| return ReplaceInstUsesWith(CI, UndefValue::get(II->getType())); | |
| if (ConstantInt *RHS = dyn_cast<ConstantInt>(II->getArgOperand(1))) { | |
| // X + 0 -> {X, false} | |
| if (RHS->isZero()) { | |
| Constant *V[] = { | |
| UndefValue::get(II->getArgOperand(0)->getType()), | |
| ConstantInt::getFalse(II->getContext()) | |
| }; | |
| Constant *Struct = | |
| ConstantStruct::get(cast<StructType>(II->getType()), V); | |
| return InsertValueInst::Create(Struct, II->getArgOperand(0), 0); | |
| } | |
| } | |
| break; | |
| case Intrinsic::usub_with_overflow: | |
| case Intrinsic::ssub_with_overflow: | |
| // undef - X -> undef | |
| // X - undef -> undef | |
| if (isa<UndefValue>(II->getArgOperand(0)) || | |
| isa<UndefValue>(II->getArgOperand(1))) | |
| return ReplaceInstUsesWith(CI, UndefValue::get(II->getType())); | |
| if (ConstantInt *RHS = dyn_cast<ConstantInt>(II->getArgOperand(1))) { | |
| // X - 0 -> {X, false} | |
| if (RHS->isZero()) { | |
| Constant *V[] = { | |
| UndefValue::get(II->getArgOperand(0)->getType()), | |
| ConstantInt::getFalse(II->getContext()) | |
| }; | |
| Constant *Struct = | |
| ConstantStruct::get(cast<StructType>(II->getType()), V); | |
| return InsertValueInst::Create(Struct, II->getArgOperand(0), 0); | |
| } | |
| } | |
| break; | |
| case Intrinsic::umul_with_overflow: { | |
| Value *LHS = II->getArgOperand(0), *RHS = II->getArgOperand(1); | |
| unsigned BitWidth = cast<IntegerType>(LHS->getType())->getBitWidth(); | |
| APInt Mask = APInt::getAllOnesValue(BitWidth); | |
| APInt LHSKnownZero(BitWidth, 0); | |
| APInt LHSKnownOne(BitWidth, 0); | |
| ComputeMaskedBits(LHS, Mask, LHSKnownZero, LHSKnownOne); | |
| APInt RHSKnownZero(BitWidth, 0); | |
| APInt RHSKnownOne(BitWidth, 0); | |
| ComputeMaskedBits(RHS, Mask, RHSKnownZero, RHSKnownOne); | |
| // Get the largest possible values for each operand. | |
| APInt LHSMax = ~LHSKnownZero; | |
| APInt RHSMax = ~RHSKnownZero; | |
| // If multiplying the maximum values does not overflow then we can turn | |
| // this into a plain NUW mul. | |
| bool Overflow; | |
| LHSMax.umul_ov(RHSMax, Overflow); | |
| if (!Overflow) { | |
| Value *Mul = Builder->CreateNUWMul(LHS, RHS, "umul_with_overflow"); | |
| Constant *V[] = { | |
| UndefValue::get(LHS->getType()), | |
| Builder->getFalse() | |
| }; | |
| Constant *Struct = ConstantStruct::get(cast<StructType>(II->getType()),V); | |
| return InsertValueInst::Create(Struct, Mul, 0); | |
| } | |
| } // FALL THROUGH | |
| case Intrinsic::smul_with_overflow: | |
| // Canonicalize constants into the RHS. | |
| if (isa<Constant>(II->getArgOperand(0)) && | |
| !isa<Constant>(II->getArgOperand(1))) { | |
| Value *LHS = II->getArgOperand(0); | |
| II->setArgOperand(0, II->getArgOperand(1)); | |
| II->setArgOperand(1, LHS); | |
| return II; | |
| } | |
| // X * undef -> undef | |
| if (isa<UndefValue>(II->getArgOperand(1))) | |
| return ReplaceInstUsesWith(CI, UndefValue::get(II->getType())); | |
| if (ConstantInt *RHSI = dyn_cast<ConstantInt>(II->getArgOperand(1))) { | |
| // X*0 -> {0, false} | |
| if (RHSI->isZero()) | |
| return ReplaceInstUsesWith(CI, Constant::getNullValue(II->getType())); | |
| // X * 1 -> {X, false} | |
| if (RHSI->equalsInt(1)) { | |
| Constant *V[] = { | |
| UndefValue::get(II->getArgOperand(0)->getType()), | |
| ConstantInt::getFalse(II->getContext()) | |
| }; | |
| Constant *Struct = | |
| ConstantStruct::get(cast<StructType>(II->getType()), V); | |
| return InsertValueInst::Create(Struct, II->getArgOperand(0), 0); | |
| } | |
| } | |
| break; | |
| //case Intrinsic::ppc_altivec_lvx: | |
| //case Intrinsic::ppc_altivec_lvxl: | |
| // // Turn PPC lvx -> load if the pointer is known aligned. | |
| // if (getOrEnforceKnownAlignment(II->getArgOperand(0), 16, TD) >= 16) { | |
| // Value *Ptr = Builder->CreateBitCast(II->getArgOperand(0), | |
| // PointerType::getUnqual(II->getType())); | |
| // return new LoadInst(Ptr); | |
| // } | |
| // break; | |
| //case Intrinsic::ppc_altivec_stvx: | |
| //case Intrinsic::ppc_altivec_stvxl: | |
| // // Turn stvx -> store if the pointer is known aligned. | |
| // if (getOrEnforceKnownAlignment(II->getArgOperand(1), 16, TD) >= 16) { | |
| // Type *OpPtrTy = | |
| // PointerType::getUnqual(II->getArgOperand(0)->getType()); | |
| // Value *Ptr = Builder->CreateBitCast(II->getArgOperand(1), OpPtrTy); | |
| // return new StoreInst(II->getArgOperand(0), Ptr); | |
| // } | |
| // break; | |
| case Intrinsic::x86_sse_storeu_ps: | |
| case Intrinsic::x86_sse2_storeu_pd: | |
| case Intrinsic::x86_sse2_storeu_dq: | |
| // Turn X86 storeu -> store if the pointer is known aligned. | |
| if (getOrEnforceKnownAlignment(II->getArgOperand(0), 16, TD) >= 16) { | |
| Type *OpPtrTy = | |
| PointerType::getUnqual(II->getArgOperand(1)->getType()); | |
| Value *Ptr = Builder->CreateBitCast(II->getArgOperand(0), OpPtrTy); | |
| return new StoreInst(II->getArgOperand(1), Ptr); | |
| } | |
| break; | |
| case Intrinsic::x86_sse_cvtss2si: | |
| case Intrinsic::x86_sse_cvtss2si64: | |
| case Intrinsic::x86_sse_cvttss2si: | |
| case Intrinsic::x86_sse_cvttss2si64: | |
| case Intrinsic::x86_sse2_cvtsd2si: | |
| case Intrinsic::x86_sse2_cvtsd2si64: | |
| case Intrinsic::x86_sse2_cvttsd2si: | |
| case Intrinsic::x86_sse2_cvttsd2si64: { | |
| // These intrinsics only demand the 0th element of their input vectors. If | |
| // we can simplify the input based on that, do so now. | |
| unsigned VWidth = | |
| cast<VectorType>(II->getArgOperand(0)->getType())->getNumElements(); | |
| APInt DemandedElts(VWidth, 1); | |
| APInt UndefElts(VWidth, 0); | |
| if (Value *V = SimplifyDemandedVectorElts(II->getArgOperand(0), | |
| DemandedElts, UndefElts)) { | |
| II->setArgOperand(0, V); | |
| return II; | |
| } | |
| break; | |
| } | |
| case Intrinsic::x86_sse41_pmovsxbw: | |
| case Intrinsic::x86_sse41_pmovsxwd: | |
| case Intrinsic::x86_sse41_pmovsxdq: | |
| case Intrinsic::x86_sse41_pmovzxbw: | |
| case Intrinsic::x86_sse41_pmovzxwd: | |
| case Intrinsic::x86_sse41_pmovzxdq: { | |
| // pmov{s|z}x ignores the upper half of their input vectors. | |
| unsigned VWidth = | |
| cast<VectorType>(II->getArgOperand(0)->getType())->getNumElements(); | |
| unsigned LowHalfElts = VWidth / 2; | |
| APInt InputDemandedElts(APInt::getBitsSet(VWidth, 0, LowHalfElts)); | |
| APInt UndefElts(VWidth, 0); | |
| if (Value *TmpV = SimplifyDemandedVectorElts(II->getArgOperand(0), | |
| InputDemandedElts, | |
| UndefElts)) { | |
| II->setArgOperand(0, TmpV); | |
| return II; | |
| } | |
| break; | |
| } | |
| //case Intrinsic::ppc_altivec_vperm: | |
| // // Turn vperm(V1,V2,mask) -> shuffle(V1,V2,mask) if mask is a constant. | |
| // if (ConstantVector *Mask = dyn_cast<ConstantVector>(II->getArgOperand(2))) { | |
| // assert(Mask->getNumOperands() == 16 && "Bad type for intrinsic!"); | |
| // | |
| // // Check that all of the elements are integer constants or undefs. | |
| // bool AllEltsOk = true; | |
| // for (unsigned i = 0; i != 16; ++i) { | |
| // if (!isa<ConstantInt>(Mask->getOperand(i)) && | |
| // !isa<UndefValue>(Mask->getOperand(i))) { | |
| // AllEltsOk = false; | |
| // break; | |
| // } | |
| // } | |
| // | |
| // if (AllEltsOk) { | |
| // // Cast the input vectors to byte vectors. | |
| // Value *Op0 = Builder->CreateBitCast(II->getArgOperand(0), | |
| // Mask->getType()); | |
| // Value *Op1 = Builder->CreateBitCast(II->getArgOperand(1), | |
| // Mask->getType()); | |
| // Value *Result = UndefValue::get(Op0->getType()); | |
| // | |
| // // Only extract each element once. | |
| // Value *ExtractedElts[32]; | |
| // memset(ExtractedElts, 0, sizeof(ExtractedElts)); | |
| // | |
| // for (unsigned i = 0; i != 16; ++i) { | |
| // if (isa<UndefValue>(Mask->getOperand(i))) | |
| // continue; | |
| // unsigned Idx=cast<ConstantInt>(Mask->getOperand(i))->getZExtValue(); | |
| // Idx &= 31; // Match the hardware behavior. | |
| // | |
| // if (ExtractedElts[Idx] == 0) { | |
| // ExtractedElts[Idx] = | |
| // Builder->CreateExtractElement(Idx < 16 ? Op0 : Op1, | |
| // Builder->getInt32(Idx&15)); | |
| // } | |
| // | |
| // // Insert this value into the result vector. | |
| // Result = Builder->CreateInsertElement(Result, ExtractedElts[Idx], | |
| // Builder->getInt32(i)); | |
| // } | |
| // return CastInst::Create(Instruction::BitCast, Result, CI.getType()); | |
| // } | |
| // } | |
| // break; | |
| //case Intrinsic::arm_neon_vld1: | |
| //case Intrinsic::arm_neon_vld2: | |
| //case Intrinsic::arm_neon_vld3: | |
| //case Intrinsic::arm_neon_vld4: | |
| //case Intrinsic::arm_neon_vld2lane: | |
| //case Intrinsic::arm_neon_vld3lane: | |
| //case Intrinsic::arm_neon_vld4lane: | |
| //case Intrinsic::arm_neon_vst1: | |
| //case Intrinsic::arm_neon_vst2: | |
| //case Intrinsic::arm_neon_vst3: | |
| //case Intrinsic::arm_neon_vst4: | |
| //case Intrinsic::arm_neon_vst2lane: | |
| //case Intrinsic::arm_neon_vst3lane: | |
| //case Intrinsic::arm_neon_vst4lane: { | |
| // unsigned MemAlign = getKnownAlignment(II->getArgOperand(0), TD); | |
| // unsigned AlignArg = II->getNumArgOperands() - 1; | |
| // ConstantInt *IntrAlign = dyn_cast<ConstantInt>(II->getArgOperand(AlignArg)); | |
| // if (IntrAlign && IntrAlign->getZExtValue() < MemAlign) { | |
| // II->setArgOperand(AlignArg, | |
| // ConstantInt::get(Type::getInt32Ty(II->getContext()), | |
| // MemAlign, false)); | |
| // return II; | |
| // } | |
| // break; | |
| //} | |
| case Intrinsic::stackrestore: { | |
| // If the save is right next to the restore, remove the restore. This can | |
| // happen when variable allocas are DCE'd. | |
| if (IntrinsicInst *SS = dyn_cast<IntrinsicInst>(II->getArgOperand(0))) { | |
| if (SS->getIntrinsicID() == Intrinsic::stacksave) { | |
| BasicBlock::iterator BI = SS; | |
| if (&*++BI == II) | |
| return EraseInstFromFunction(CI); | |
| } | |
| } | |
| // Scan down this block to see if there is another stack restore in the | |
| // same block without an intervening call/alloca. | |
| BasicBlock::iterator BI = II; | |
| TerminatorInst *TI = II->getParent()->getTerminator(); | |
| bool CannotRemove = false; | |
| for (++BI; &*BI != TI; ++BI) { | |
| if (isa<AllocaInst>(BI) || isMalloc(BI)) { | |
| CannotRemove = true; | |
| break; | |
| } | |
| if (CallInst *BCI = dyn_cast<CallInst>(BI)) { | |
| if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(BCI)) { | |
| // If there is a stackrestore below this one, remove this one. | |
| if (II->getIntrinsicID() == Intrinsic::stackrestore) | |
| return EraseInstFromFunction(CI); | |
| // Otherwise, ignore the intrinsic. | |
| } else { | |
| // If we found a non-intrinsic call, we can't remove the stack | |
| // restore. | |
| CannotRemove = true; | |
| break; | |
| } | |
| } | |
| } | |
| // If the stack restore is in a return, resume, or unwind block and if there | |
| // are no allocas or calls between the restore and the return, nuke the | |
| // restore. | |
| if (!CannotRemove && (isa<ReturnInst>(TI) || isa<ResumeInst>(TI) || | |
| isa<UnwindInst>(TI))) | |
| return EraseInstFromFunction(CI); | |
| break; | |
| } | |
| } | |
| return visitCallSite(II); | |
| } | |
| // InvokeInst simplification | |
| // | |
| Instruction *InstCombiner::visitInvokeInst(InvokeInst &II) { | |
| return visitCallSite(&II); | |
| } | |
| /// isSafeToEliminateVarargsCast - If this cast does not affect the value | |
| /// passed through the varargs area, we can eliminate the use of the cast. | |
| static bool isSafeToEliminateVarargsCast(const CallSite CS, | |
| const CastInst * const CI, | |
| const TargetData * const TD, | |
| const int ix) { | |
| if (!CI->isLosslessCast()) | |
| return false; | |
| // The size of ByVal arguments is derived from the type, so we | |
| // can't change to a type with a different size. If the size were | |
| // passed explicitly we could avoid this check. | |
| if (!CS.paramHasAttr(ix, Attribute::ByVal)) | |
| return true; | |
| Type* SrcTy = | |
| cast<PointerType>(CI->getOperand(0)->getType())->getElementType(); | |
| Type* DstTy = cast<PointerType>(CI->getType())->getElementType(); | |
| if (!SrcTy->isSized() || !DstTy->isSized()) | |
| return false; | |
| if (!TD || TD->getTypeAllocSize(SrcTy) != TD->getTypeAllocSize(DstTy)) | |
| return false; | |
| return true; | |
| } | |
| namespace { | |
| class InstCombineFortifiedLibCalls : public SimplifyFortifiedLibCalls { | |
| InstCombiner *IC; | |
| protected: | |
| void replaceCall(Value *With) { | |
| NewInstruction = IC->ReplaceInstUsesWith(*CI, With); | |
| } | |
| bool isFoldable(unsigned SizeCIOp, unsigned SizeArgOp, bool isString) const { | |
| if (CI->getArgOperand(SizeCIOp) == CI->getArgOperand(SizeArgOp)) | |
| return true; | |
| if (ConstantInt *SizeCI = | |
| dyn_cast<ConstantInt>(CI->getArgOperand(SizeCIOp))) { | |
| if (SizeCI->isAllOnesValue()) | |
| return true; | |
| if (isString) { | |
| uint64_t Len = GetStringLength(CI->getArgOperand(SizeArgOp)); | |
| // If the length is 0 we don't know how long it is and so we can't | |
| // remove the check. | |
| if (Len == 0) return false; | |
| return SizeCI->getZExtValue() >= Len; | |
| } | |
| if (ConstantInt *Arg = dyn_cast<ConstantInt>( | |
| CI->getArgOperand(SizeArgOp))) | |
| return SizeCI->getZExtValue() >= Arg->getZExtValue(); | |
| } | |
| return false; | |
| } | |
| public: | |
| InstCombineFortifiedLibCalls(InstCombiner *IC) : IC(IC), NewInstruction(0) { } | |
| Instruction *NewInstruction; | |
| }; | |
| } // end anonymous namespace | |
| // Try to fold some different type of calls here. | |
| // Currently we're only working with the checking functions, memcpy_chk, | |
| // mempcpy_chk, memmove_chk, memset_chk, strcpy_chk, stpcpy_chk, strncpy_chk, | |
| // strcat_chk and strncat_chk. | |
| Instruction *InstCombiner::tryOptimizeCall(CallInst *CI, const TargetData *TD) { | |
| if (CI->getCalledFunction() == 0) return 0; | |
| InstCombineFortifiedLibCalls Simplifier(this); | |
| Simplifier.fold(CI, TD); | |
| return Simplifier.NewInstruction; | |
| } | |
| static IntrinsicInst *FindInitTrampolineFromAlloca(Value *TrampMem) { | |
| // Strip off at most one level of pointer casts, looking for an alloca. This | |
| // is good enough in practice and simpler than handling any number of casts. | |
| Value *Underlying = TrampMem->stripPointerCasts(); | |
| if (Underlying != TrampMem && | |
| (!Underlying->hasOneUse() || *Underlying->use_begin() != TrampMem)) | |
| return 0; | |
| if (!isa<AllocaInst>(Underlying)) | |
| return 0; | |
| IntrinsicInst *InitTrampoline = 0; | |
| for (Value::use_iterator I = TrampMem->use_begin(), E = TrampMem->use_end(); | |
| I != E; I++) { | |
| IntrinsicInst *II = dyn_cast<IntrinsicInst>(*I); | |
| if (!II) | |
| return 0; | |
| if (II->getIntrinsicID() == Intrinsic::init_trampoline) { | |
| if (InitTrampoline) | |
| // More than one init_trampoline writes to this value. Give up. | |
| return 0; | |
| InitTrampoline = II; | |
| continue; | |
| } | |
| if (II->getIntrinsicID() == Intrinsic::adjust_trampoline) | |
| // Allow any number of calls to adjust.trampoline. | |
| continue; | |
| return 0; | |
| } | |
| // No call to init.trampoline found. | |
| if (!InitTrampoline) | |
| return 0; | |
| // Check that the alloca is being used in the expected way. | |
| if (InitTrampoline->getOperand(0) != TrampMem) | |
| return 0; | |
| return InitTrampoline; | |
| } | |
| static IntrinsicInst *FindInitTrampolineFromBB(IntrinsicInst *AdjustTramp, | |
| Value *TrampMem) { | |
| // Visit all the previous instructions in the basic block, and try to find a | |
| // init.trampoline which has a direct path to the adjust.trampoline. | |
| for (BasicBlock::iterator I = AdjustTramp, | |
| E = AdjustTramp->getParent()->begin(); I != E; ) { | |
| Instruction *Inst = --I; | |
| if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(I)) | |
| if (II->getIntrinsicID() == Intrinsic::init_trampoline && | |
| II->getOperand(0) == TrampMem) | |
| return II; | |
| if (Inst->mayWriteToMemory()) | |
| return 0; | |
| } | |
| return 0; | |
| } | |
| // Given a call to llvm.adjust.trampoline, find and return the corresponding | |
| // call to llvm.init.trampoline if the call to the trampoline can be optimized | |
| // to a direct call to a function. Otherwise return NULL. | |
| // | |
| static IntrinsicInst *FindInitTrampoline(Value *Callee) { | |
| Callee = Callee->stripPointerCasts(); | |
| IntrinsicInst *AdjustTramp = dyn_cast<IntrinsicInst>(Callee); | |
| if (!AdjustTramp || | |
| AdjustTramp->getIntrinsicID() != Intrinsic::adjust_trampoline) | |
| return 0; | |
| Value *TrampMem = AdjustTramp->getOperand(0); | |
| if (IntrinsicInst *IT = FindInitTrampolineFromAlloca(TrampMem)) | |
| return IT; | |
| if (IntrinsicInst *IT = FindInitTrampolineFromBB(AdjustTramp, TrampMem)) | |
| return IT; | |
| return 0; | |
| } | |
| // visitCallSite - Improvements for call and invoke instructions. | |
| // | |
| Instruction *InstCombiner::visitCallSite(CallSite CS) { | |
| bool Changed = false; | |
| // If the callee is a pointer to a function, attempt to move any casts to the | |
| // arguments of the call/invoke. | |
| Value *Callee = CS.getCalledValue(); | |
| if (!isa<Function>(Callee) && transformConstExprCastCall(CS)) | |
| return 0; | |
| if (Function *CalleeF = dyn_cast<Function>(Callee)) | |
| // If the call and callee calling conventions don't match, this call must | |
| // be unreachable, as the call is undefined. | |
| if (CalleeF->getCallingConv() != CS.getCallingConv() && | |
| // Only do this for calls to a function with a body. A prototype may | |
| // not actually end up matching the implementation's calling conv for a | |
| // variety of reasons (e.g. it may be written in assembly). | |
| !CalleeF->isDeclaration()) { | |
| Instruction *OldCall = CS.getInstruction(); | |
| new StoreInst(ConstantInt::getTrue(Callee->getContext()), | |
| UndefValue::get(Type::getInt1PtrTy(Callee->getContext())), | |
| OldCall); | |
| // If OldCall dues not return void then replaceAllUsesWith undef. | |
| // This allows ValueHandlers and custom metadata to adjust itself. | |
| if (!OldCall->getType()->isVoidTy()) | |
| ReplaceInstUsesWith(*OldCall, UndefValue::get(OldCall->getType())); | |
| if (isa<CallInst>(OldCall)) | |
| return EraseInstFromFunction(*OldCall); | |
| // We cannot remove an invoke, because it would change the CFG, just | |
| // change the callee to a null pointer. | |
| cast<InvokeInst>(OldCall)->setCalledFunction( | |
| Constant::getNullValue(CalleeF->getType())); | |
| return 0; | |
| } | |
| if (isa<ConstantPointerNull>(Callee) || isa<UndefValue>(Callee)) { | |
| // This instruction is not reachable, just remove it. We insert a store to | |
| // undef so that we know that this code is not reachable, despite the fact | |
| // that we can't modify the CFG here. | |
| new StoreInst(ConstantInt::getTrue(Callee->getContext()), | |
| UndefValue::get(Type::getInt1PtrTy(Callee->getContext())), | |
| CS.getInstruction()); | |
| // If CS does not return void then replaceAllUsesWith undef. | |
| // This allows ValueHandlers and custom metadata to adjust itself. | |
| if (!CS.getInstruction()->getType()->isVoidTy()) | |
| ReplaceInstUsesWith(*CS.getInstruction(), | |
| UndefValue::get(CS.getInstruction()->getType())); | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(CS.getInstruction())) { | |
| // Don't break the CFG, insert a dummy cond branch. | |
| BranchInst::Create(II->getNormalDest(), II->getUnwindDest(), | |
| ConstantInt::getTrue(Callee->getContext()), II); | |
| } | |
| return EraseInstFromFunction(*CS.getInstruction()); | |
| } | |
| if (IntrinsicInst *II = FindInitTrampoline(Callee)) | |
| return transformCallThroughTrampoline(CS, II); | |
| PointerType *PTy = cast<PointerType>(Callee->getType()); | |
| FunctionType *FTy = cast<FunctionType>(PTy->getElementType()); | |
| if (FTy->isVarArg()) { | |
| int ix = FTy->getNumParams() + (isa<InvokeInst>(Callee) ? 3 : 1); | |
| // See if we can optimize any arguments passed through the varargs area of | |
| // the call. | |
| for (CallSite::arg_iterator I = CS.arg_begin()+FTy->getNumParams(), | |
| E = CS.arg_end(); I != E; ++I, ++ix) { | |
| CastInst *CI = dyn_cast<CastInst>(*I); | |
| if (CI && isSafeToEliminateVarargsCast(CS, CI, TD, ix)) { | |
| *I = CI->getOperand(0); | |
| Changed = true; | |
| } | |
| } | |
| } | |
| if (isa<InlineAsm>(Callee) && !CS.doesNotThrow()) { | |
| // Inline asm calls cannot throw - mark them 'nounwind'. | |
| CS.setDoesNotThrow(); | |
| Changed = true; | |
| } | |
| // Try to optimize the call if possible, we require TargetData for most of | |
| // this. None of these calls are seen as possibly dead so go ahead and | |
| // delete the instruction now. | |
| if (CallInst *CI = dyn_cast<CallInst>(CS.getInstruction())) { | |
| Instruction *I = tryOptimizeCall(CI, TD); | |
| // If we changed something return the result, etc. Otherwise let | |
| // the fallthrough check. | |
| if (I) return EraseInstFromFunction(*I); | |
| } | |
| return Changed ? CS.getInstruction() : 0; | |
| } | |
| // transformConstExprCastCall - If the callee is a constexpr cast of a function, | |
| // attempt to move the cast to the arguments of the call/invoke. | |
| // | |
| bool InstCombiner::transformConstExprCastCall(CallSite CS) { | |
| Function *Callee = | |
| dyn_cast<Function>(CS.getCalledValue()->stripPointerCasts()); | |
| if (Callee == 0) | |
| return false; | |
| Instruction *Caller = CS.getInstruction(); | |
| const AttrListPtr &CallerPAL = CS.getAttributes(); | |
| // Okay, this is a cast from a function to a different type. Unless doing so | |
| // would cause a type conversion of one of our arguments, change this call to | |
| // be a direct call with arguments casted to the appropriate types. | |
| // | |
| FunctionType *FT = Callee->getFunctionType(); | |
| Type *OldRetTy = Caller->getType(); | |
| Type *NewRetTy = FT->getReturnType(); | |
| if (NewRetTy->isStructTy()) | |
| return false; // TODO: Handle multiple return values. | |
| // Check to see if we are changing the return type... | |
| if (OldRetTy != NewRetTy) { | |
| if (Callee->isDeclaration() && | |
| // Conversion is ok if changing from one pointer type to another or from | |
| // a pointer to an integer of the same size. | |
| !((OldRetTy->isPointerTy() || !TD || | |
| OldRetTy == TD->getIntPtrType(Caller->getContext())) && | |
| (NewRetTy->isPointerTy() || !TD || | |
| NewRetTy == TD->getIntPtrType(Caller->getContext())))) | |
| return false; // Cannot transform this return value. | |
| if (!Caller->use_empty() && | |
| // void -> non-void is handled specially | |
| !NewRetTy->isVoidTy() && !CastInst::isCastable(NewRetTy, OldRetTy)) | |
| return false; // Cannot transform this return value. | |
| if (!CallerPAL.isEmpty() && !Caller->use_empty()) { | |
| Attributes RAttrs = CallerPAL.getRetAttributes(); | |
| if (RAttrs & Attribute::typeIncompatible(NewRetTy)) | |
| return false; // Attribute not compatible with transformed value. | |
| } | |
| // If the callsite is an invoke instruction, and the return value is used by | |
| // a PHI node in a successor, we cannot change the return type of the call | |
| // because there is no place to put the cast instruction (without breaking | |
| // the critical edge). Bail out in this case. | |
| if (!Caller->use_empty()) | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(Caller)) | |
| for (Value::use_iterator UI = II->use_begin(), E = II->use_end(); | |
| UI != E; ++UI) | |
| if (PHINode *PN = dyn_cast<PHINode>(*UI)) | |
| if (PN->getParent() == II->getNormalDest() || | |
| PN->getParent() == II->getUnwindDest()) | |
| return false; | |
| } | |
| unsigned NumActualArgs = unsigned(CS.arg_end()-CS.arg_begin()); | |
| unsigned NumCommonArgs = std::min(FT->getNumParams(), NumActualArgs); | |
| CallSite::arg_iterator AI = CS.arg_begin(); | |
| for (unsigned i = 0, e = NumCommonArgs; i != e; ++i, ++AI) { | |
| Type *ParamTy = FT->getParamType(i); | |
| Type *ActTy = (*AI)->getType(); | |
| if (!CastInst::isCastable(ActTy, ParamTy)) | |
| return false; // Cannot transform this parameter value. | |
| unsigned Attrs = CallerPAL.getParamAttributes(i + 1); | |
| if (Attrs & Attribute::typeIncompatible(ParamTy)) | |
| return false; // Attribute not compatible with transformed value. | |
| // If the parameter is passed as a byval argument, then we have to have a | |
| // sized type and the sized type has to have the same size as the old type. | |
| if (ParamTy != ActTy && (Attrs & Attribute::ByVal)) { | |
| PointerType *ParamPTy = dyn_cast<PointerType>(ParamTy); | |
| if (ParamPTy == 0 || !ParamPTy->getElementType()->isSized() || TD == 0) | |
| return false; | |
| Type *CurElTy = cast<PointerType>(ActTy)->getElementType(); | |
| if (TD->getTypeAllocSize(CurElTy) != | |
| TD->getTypeAllocSize(ParamPTy->getElementType())) | |
| return false; | |
| } | |
| // Converting from one pointer type to another or between a pointer and an | |
| // integer of the same size is safe even if we do not have a body. | |
| bool isConvertible = ActTy == ParamTy || | |
| (TD && ((ParamTy->isPointerTy() || | |
| ParamTy == TD->getIntPtrType(Caller->getContext())) && | |
| (ActTy->isPointerTy() || | |
| ActTy == TD->getIntPtrType(Caller->getContext())))); | |
| if (Callee->isDeclaration() && !isConvertible) return false; | |
| } | |
| if (Callee->isDeclaration()) { | |
| // Do not delete arguments unless we have a function body. | |
| if (FT->getNumParams() < NumActualArgs && !FT->isVarArg()) | |
| return false; | |
| // If the callee is just a declaration, don't change the varargsness of the | |
| // call. We don't want to introduce a varargs call where one doesn't | |
| // already exist. | |
| PointerType *APTy = cast<PointerType>(CS.getCalledValue()->getType()); | |
| if (FT->isVarArg()!=cast<FunctionType>(APTy->getElementType())->isVarArg()) | |
| return false; | |
| } | |
| if (FT->getNumParams() < NumActualArgs && FT->isVarArg() && | |
| !CallerPAL.isEmpty()) | |
| // In this case we have more arguments than the new function type, but we | |
| // won't be dropping them. Check that these extra arguments have attributes | |
| // that are compatible with being a vararg call argument. | |
| for (unsigned i = CallerPAL.getNumSlots(); i; --i) { | |
| if (CallerPAL.getSlot(i - 1).Index <= FT->getNumParams()) | |
| break; | |
| Attributes PAttrs = CallerPAL.getSlot(i - 1).Attrs; | |
| if (PAttrs & Attribute::VarArgsIncompatible) | |
| return false; | |
| } | |
| // Okay, we decided that this is a safe thing to do: go ahead and start | |
| // inserting cast instructions as necessary. | |
| std::vector<Value*> Args; | |
| Args.reserve(NumActualArgs); | |
| SmallVector<AttributeWithIndex, 8> attrVec; | |
| attrVec.reserve(NumCommonArgs); | |
| // Get any return attributes. | |
| Attributes RAttrs = CallerPAL.getRetAttributes(); | |
| // If the return value is not being used, the type may not be compatible | |
| // with the existing attributes. Wipe out any problematic attributes. | |
| RAttrs &= ~Attribute::typeIncompatible(NewRetTy); | |
| // Add the new return attributes. | |
| if (RAttrs) | |
| attrVec.push_back(AttributeWithIndex::get(0, RAttrs)); | |
| AI = CS.arg_begin(); | |
| for (unsigned i = 0; i != NumCommonArgs; ++i, ++AI) { | |
| Type *ParamTy = FT->getParamType(i); | |
| if ((*AI)->getType() == ParamTy) { | |
| Args.push_back(*AI); | |
| } else { | |
| Instruction::CastOps opcode = CastInst::getCastOpcode(*AI, | |
| false, ParamTy, false); | |
| Args.push_back(Builder->CreateCast(opcode, *AI, ParamTy)); | |
| } | |
| // Add any parameter attributes. | |
| if (Attributes PAttrs = CallerPAL.getParamAttributes(i + 1)) | |
| attrVec.push_back(AttributeWithIndex::get(i + 1, PAttrs)); | |
| } | |
| // If the function takes more arguments than the call was taking, add them | |
| // now. | |
| for (unsigned i = NumCommonArgs; i != FT->getNumParams(); ++i) | |
| Args.push_back(Constant::getNullValue(FT->getParamType(i))); | |
| // If we are removing arguments to the function, emit an obnoxious warning. | |
| if (FT->getNumParams() < NumActualArgs) { | |
| if (!FT->isVarArg()) { | |
| errs() << "WARNING: While resolving call to function '" | |
| << Callee->getName() << "' arguments were dropped!\n"; | |
| } else { | |
| // Add all of the arguments in their promoted form to the arg list. | |
| for (unsigned i = FT->getNumParams(); i != NumActualArgs; ++i, ++AI) { | |
| Type *PTy = getPromotedType((*AI)->getType()); | |
| if (PTy != (*AI)->getType()) { | |
| // Must promote to pass through va_arg area! | |
| Instruction::CastOps opcode = | |
| CastInst::getCastOpcode(*AI, false, PTy, false); | |
| Args.push_back(Builder->CreateCast(opcode, *AI, PTy)); | |
| } else { | |
| Args.push_back(*AI); | |
| } | |
| // Add any parameter attributes. | |
| if (Attributes PAttrs = CallerPAL.getParamAttributes(i + 1)) | |
| attrVec.push_back(AttributeWithIndex::get(i + 1, PAttrs)); | |
| } | |
| } | |
| } | |
| if (Attributes FnAttrs = CallerPAL.getFnAttributes()) | |
| attrVec.push_back(AttributeWithIndex::get(~0, FnAttrs)); | |
| if (NewRetTy->isVoidTy()) | |
| Caller->setName(""); // Void type should not have a name. | |
| const AttrListPtr &NewCallerPAL = AttrListPtr::get(attrVec.begin(), | |
| attrVec.end()); | |
| Instruction *NC; | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(Caller)) { | |
| NC = Builder->CreateInvoke(Callee, II->getNormalDest(), | |
| II->getUnwindDest(), Args); | |
| NC->takeName(II); | |
| cast<InvokeInst>(NC)->setCallingConv(II->getCallingConv()); | |
| cast<InvokeInst>(NC)->setAttributes(NewCallerPAL); | |
| } else { | |
| CallInst *CI = cast<CallInst>(Caller); | |
| NC = Builder->CreateCall(Callee, Args); | |
| NC->takeName(CI); | |
| if (CI->isTailCall()) | |
| cast<CallInst>(NC)->setTailCall(); | |
| cast<CallInst>(NC)->setCallingConv(CI->getCallingConv()); | |
| cast<CallInst>(NC)->setAttributes(NewCallerPAL); | |
| } | |
| // Insert a cast of the return type as necessary. | |
| Value *NV = NC; | |
| if (OldRetTy != NV->getType() && !Caller->use_empty()) { | |
| if (!NV->getType()->isVoidTy()) { | |
| Instruction::CastOps opcode = | |
| CastInst::getCastOpcode(NC, false, OldRetTy, false); | |
| NV = NC = CastInst::Create(opcode, NC, OldRetTy); | |
| NC->setDebugLoc(Caller->getDebugLoc()); | |
| // If this is an invoke instruction, we should insert it after the first | |
| // non-phi, instruction in the normal successor block. | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(Caller)) { | |
| BasicBlock::iterator I = II->getNormalDest()->getFirstInsertionPt(); | |
| InsertNewInstBefore(NC, *I); | |
| } else { | |
| // Otherwise, it's a call, just insert cast right after the call. | |
| InsertNewInstBefore(NC, *Caller); | |
| } | |
| Worklist.AddUsersToWorkList(*Caller); | |
| } else { | |
| NV = UndefValue::get(Caller->getType()); | |
| } | |
| } | |
| if (!Caller->use_empty()) | |
| ReplaceInstUsesWith(*Caller, NV); | |
| EraseInstFromFunction(*Caller); | |
| return true; | |
| } | |
| // transformCallThroughTrampoline - Turn a call to a function created by | |
| // init_trampoline / adjust_trampoline intrinsic pair into a direct call to the | |
| // underlying function. | |
| // | |
| Instruction * | |
| InstCombiner::transformCallThroughTrampoline(CallSite CS, | |
| IntrinsicInst *Tramp) { | |
| Value *Callee = CS.getCalledValue(); | |
| PointerType *PTy = cast<PointerType>(Callee->getType()); | |
| FunctionType *FTy = cast<FunctionType>(PTy->getElementType()); | |
| const AttrListPtr &Attrs = CS.getAttributes(); | |
| // If the call already has the 'nest' attribute somewhere then give up - | |
| // otherwise 'nest' would occur twice after splicing in the chain. | |
| if (Attrs.hasAttrSomewhere(Attribute::Nest)) | |
| return 0; | |
| assert(Tramp && | |
| "transformCallThroughTrampoline called with incorrect CallSite."); | |
| Function *NestF =cast<Function>(Tramp->getArgOperand(1)->stripPointerCasts()); | |
| PointerType *NestFPTy = cast<PointerType>(NestF->getType()); | |
| FunctionType *NestFTy = cast<FunctionType>(NestFPTy->getElementType()); | |
| const AttrListPtr &NestAttrs = NestF->getAttributes(); | |
| if (!NestAttrs.isEmpty()) { | |
| unsigned NestIdx = 1; | |
| Type *NestTy = 0; | |
| Attributes NestAttr = Attribute::None; | |
| // Look for a parameter marked with the 'nest' attribute. | |
| for (FunctionType::param_iterator I = NestFTy->param_begin(), | |
| E = NestFTy->param_end(); I != E; ++NestIdx, ++I) | |
| if (NestAttrs.paramHasAttr(NestIdx, Attribute::Nest)) { | |
| // Record the parameter type and any other attributes. | |
| NestTy = *I; | |
| NestAttr = NestAttrs.getParamAttributes(NestIdx); | |
| break; | |
| } | |
| if (NestTy) { | |
| Instruction *Caller = CS.getInstruction(); | |
| std::vector<Value*> NewArgs; | |
| NewArgs.reserve(unsigned(CS.arg_end()-CS.arg_begin())+1); | |
| SmallVector<AttributeWithIndex, 8> NewAttrs; | |
| NewAttrs.reserve(Attrs.getNumSlots() + 1); | |
| // Insert the nest argument into the call argument list, which may | |
| // mean appending it. Likewise for attributes. | |
| // Add any result attributes. | |
| if (Attributes Attr = Attrs.getRetAttributes()) | |
| NewAttrs.push_back(AttributeWithIndex::get(0, Attr)); | |
| { | |
| unsigned Idx = 1; | |
| CallSite::arg_iterator I = CS.arg_begin(), E = CS.arg_end(); | |
| do { | |
| if (Idx == NestIdx) { | |
| // Add the chain argument and attributes. | |
| Value *NestVal = Tramp->getArgOperand(2); | |
| if (NestVal->getType() != NestTy) | |
| NestVal = Builder->CreateBitCast(NestVal, NestTy, "nest"); | |
| NewArgs.push_back(NestVal); | |
| NewAttrs.push_back(AttributeWithIndex::get(NestIdx, NestAttr)); | |
| } | |
| if (I == E) | |
| break; | |
| // Add the original argument and attributes. | |
| NewArgs.push_back(*I); | |
| if (Attributes Attr = Attrs.getParamAttributes(Idx)) | |
| NewAttrs.push_back | |
| (AttributeWithIndex::get(Idx + (Idx >= NestIdx), Attr)); | |
| ++Idx, ++I; | |
| } while (1); | |
| } | |
| // Add any function attributes. | |
| if (Attributes Attr = Attrs.getFnAttributes()) | |
| NewAttrs.push_back(AttributeWithIndex::get(~0, Attr)); | |
| // The trampoline may have been bitcast to a bogus type (FTy). | |
| // Handle this by synthesizing a new function type, equal to FTy | |
| // with the chain parameter inserted. | |
| std::vector<Type*> NewTypes; | |
| NewTypes.reserve(FTy->getNumParams()+1); | |
| // Insert the chain's type into the list of parameter types, which may | |
| // mean appending it. | |
| { | |
| unsigned Idx = 1; | |
| FunctionType::param_iterator I = FTy->param_begin(), | |
| E = FTy->param_end(); | |
| do { | |
| if (Idx == NestIdx) | |
| // Add the chain's type. | |
| NewTypes.push_back(NestTy); | |
| if (I == E) | |
| break; | |
| // Add the original type. | |
| NewTypes.push_back(*I); | |
| ++Idx, ++I; | |
| } while (1); | |
| } | |
| // Replace the trampoline call with a direct call. Let the generic | |
| // code sort out any function type mismatches. | |
| FunctionType *NewFTy = FunctionType::get(FTy->getReturnType(), NewTypes, | |
| FTy->isVarArg()); | |
| Constant *NewCallee = | |
| NestF->getType() == PointerType::getUnqual(NewFTy) ? | |
| NestF : ConstantExpr::getBitCast(NestF, | |
| PointerType::getUnqual(NewFTy)); | |
| const AttrListPtr &NewPAL = AttrListPtr::get(NewAttrs.begin(), | |
| NewAttrs.end()); | |
| Instruction *NewCaller; | |
| if (InvokeInst *II = dyn_cast<InvokeInst>(Caller)) { | |
| NewCaller = InvokeInst::Create(NewCallee, | |
| II->getNormalDest(), II->getUnwindDest(), | |
| NewArgs); | |
| cast<InvokeInst>(NewCaller)->setCallingConv(II->getCallingConv()); | |
| cast<InvokeInst>(NewCaller)->setAttributes(NewPAL); | |
| } else { | |
| NewCaller = CallInst::Create(NewCallee, NewArgs); | |
| if (cast<CallInst>(Caller)->isTailCall()) | |
| cast<CallInst>(NewCaller)->setTailCall(); | |
| cast<CallInst>(NewCaller)-> | |
| setCallingConv(cast<CallInst>(Caller)->getCallingConv()); | |
| cast<CallInst>(NewCaller)->setAttributes(NewPAL); | |
| } | |
| return NewCaller; | |
| } | |
| } | |
| // Replace the trampoline call with a direct call. Since there is no 'nest' | |
| // parameter, there is no need to adjust the argument list. Let the generic | |
| // code sort out any function type mismatches. | |
| Constant *NewCallee = | |
| NestF->getType() == PTy ? NestF : | |
| ConstantExpr::getBitCast(NestF, PTy); | |
| CS.setCalledFunction(NewCallee); | |
| return CS.getInstruction(); | |
| } | |