| ; Test 64-bit signed comparisons between memory and a constant. |
| ; |
| ; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s |
| |
| ; Check ordered comparisons with 0. |
| define double @f1(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f1: |
| ; CHECK: cghsi 0(%r2), 0 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check ordered comparisons with 1. |
| define double @f2(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f2: |
| ; CHECK: cghsi 0(%r2), 0 |
| ; CHECK-NEXT: bler %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 1 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check ordered comparisons with the high end of the signed 16-bit range. |
| define double @f3(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f3: |
| ; CHECK: cghsi 0(%r2), 32767 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 32767 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the next value up, which can't use CGHSI. |
| define double @f4(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f4: |
| ; CHECK-NOT: cghsi |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 32768 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check ordered comparisons with -1. |
| define double @f5(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f5: |
| ; CHECK: cghsi 0(%r2), -1 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, -1 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check ordered comparisons with the low end of the 16-bit signed range. |
| define double @f6(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f6: |
| ; CHECK: cghsi 0(%r2), -32768 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, -32768 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the next value down, which should be treated as a positive value. |
| define double @f7(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f7: |
| ; CHECK-NOT: cghsi |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, -32769 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check equality comparisons with 0. |
| define double @f8(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f8: |
| ; CHECK: cghsi 0(%r2), 0 |
| ; CHECK-NEXT: ber %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check equality comparisons with 1. |
| define double @f9(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f9: |
| ; CHECK: cghsi 0(%r2), 1 |
| ; CHECK-NEXT: ber %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, 1 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check equality comparisons with the high end of the signed 16-bit range. |
| define double @f10(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f10: |
| ; CHECK: cghsi 0(%r2), 32767 |
| ; CHECK-NEXT: ber %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, 32767 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the next value up, which can't use CGHSI. |
| define double @f11(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f11: |
| ; CHECK-NOT: cghsi |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, 32768 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check equality comparisons with -1. |
| define double @f12(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f12: |
| ; CHECK: cghsi 0(%r2), -1 |
| ; CHECK-NEXT: ber %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, -1 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check equality comparisons with the low end of the 16-bit signed range. |
| define double @f13(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f13: |
| ; CHECK: cghsi 0(%r2), -32768 |
| ; CHECK-NEXT: ber %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, -32768 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the next value down, which should be treated as a positive value. |
| define double @f14(double %a, double %b, i64 *%ptr) { |
| ; CHECK-LABEL: f14: |
| ; CHECK-NOT: cghsi |
| ; CHECK: br %r14 |
| %val = load i64, i64 *%ptr |
| %cond = icmp eq i64 %val, -32769 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the high end of the CGHSI range. |
| define double @f15(double %a, double %b, i64 %i1, i64 *%base) { |
| ; CHECK-LABEL: f15: |
| ; CHECK: cghsi 4088(%r3), 0 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %ptr = getelementptr i64, i64 *%base, i64 511 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check the next doubleword up, which needs separate address logic, |
| define double @f16(double %a, double %b, i64 *%base) { |
| ; CHECK-LABEL: f16: |
| ; CHECK: aghi %r2, 4096 |
| ; CHECK: cghsi 0(%r2), 0 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %ptr = getelementptr i64, i64 *%base, i64 512 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check negative offsets, which also need separate address logic. |
| define double @f17(double %a, double %b, i64 *%base) { |
| ; CHECK-LABEL: f17: |
| ; CHECK: aghi %r2, -8 |
| ; CHECK: cghsi 0(%r2), 0 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %ptr = getelementptr i64, i64 *%base, i64 -1 |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |
| |
| ; Check that CGHSI does not allow indices. |
| define double @f18(double %a, double %b, i64 %base, i64 %index) { |
| ; CHECK-LABEL: f18: |
| ; CHECK: agr {{%r2, %r3|%r3, %r2}} |
| ; CHECK: cghsi 0({{%r[23]}}), 0 |
| ; CHECK-NEXT: blr %r14 |
| ; CHECK: ldr %f0, %f2 |
| ; CHECK: br %r14 |
| %add = add i64 %base, %index |
| %ptr = inttoptr i64 %add to i64 * |
| %val = load i64, i64 *%ptr |
| %cond = icmp slt i64 %val, 0 |
| %res = select i1 %cond, double %a, double %b |
| ret double %res |
| } |