| //===-- EvergreenInstructions.td - EG Instruction defs ----*- tablegen -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // TableGen definitions for instructions which are: |
| // - Available to Evergreen and newer VLIW4/VLIW5 GPUs |
| // - Available only on Evergreen family GPUs. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| def isEG : Predicate< |
| "Subtarget->getGeneration() >= AMDGPUSubtarget::EVERGREEN && " |
| "!Subtarget->hasCaymanISA()" |
| >; |
| |
| def isEGorCayman : Predicate< |
| "Subtarget->getGeneration() == AMDGPUSubtarget::EVERGREEN ||" |
| "Subtarget->getGeneration() == AMDGPUSubtarget::NORTHERN_ISLANDS" |
| >; |
| |
| class EGPat<dag pattern, dag result> : AMDGPUPat<pattern, result> { |
| let SubtargetPredicate = isEG; |
| } |
| |
| class EGOrCaymanPat<dag pattern, dag result> : AMDGPUPat<pattern, result> { |
| let SubtargetPredicate = isEGorCayman; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Evergreen / Cayman store instructions |
| //===----------------------------------------------------------------------===// |
| |
| let SubtargetPredicate = isEGorCayman in { |
| |
| class CF_MEM_RAT_CACHELESS <bits<6> rat_inst, bits<4> rat_id, bits<4> mask, dag ins, |
| string name, list<dag> pattern> |
| : EG_CF_RAT <0x57, rat_inst, rat_id, mask, (outs), ins, |
| "MEM_RAT_CACHELESS "#name, pattern>; |
| |
| class CF_MEM_RAT <bits<6> rat_inst, bits<4> rat_id, bits<4> mask, dag ins, |
| dag outs, string name, list<dag> pattern> |
| : EG_CF_RAT <0x56, rat_inst, rat_id, mask, outs, ins, |
| "MEM_RAT "#name, pattern>; |
| |
| class CF_MEM_RAT_STORE_TYPED<bits<1> has_eop> |
| : CF_MEM_RAT <0x1, ?, 0xf, (ins R600_Reg128:$rw_gpr, R600_Reg128:$index_gpr, |
| i32imm:$rat_id, InstFlag:$eop), (outs), |
| "STORE_TYPED RAT($rat_id) $rw_gpr, $index_gpr" |
| #!if(has_eop, ", $eop", ""), |
| [(int_r600_rat_store_typed R600_Reg128:$rw_gpr, |
| R600_Reg128:$index_gpr, |
| (i32 imm:$rat_id))]>; |
| |
| def RAT_MSKOR : CF_MEM_RAT <0x11, 0, 0xf, |
| (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr), (outs), |
| "MSKOR $rw_gpr.XW, $index_gpr", |
| [(mskor_global v4i32:$rw_gpr, i32:$index_gpr)] |
| > { |
| let eop = 0; |
| } |
| |
| |
| multiclass RAT_ATOMIC<bits<6> op_ret, bits<6> op_noret, string name> { |
| let Constraints = "$rw_gpr = $out_gpr", eop = 0, mayStore = 1 in { |
| def _RTN: CF_MEM_RAT <op_ret, 0, 0xf, |
| (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr), |
| (outs R600_Reg128:$out_gpr), |
| name ## "_RTN" ## " $rw_gpr, $index_gpr", [] >; |
| def _NORET: CF_MEM_RAT <op_noret, 0, 0xf, |
| (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr), |
| (outs R600_Reg128:$out_gpr), |
| name ## " $rw_gpr, $index_gpr", [] >; |
| } |
| } |
| |
| // Swap no-ret is just store. Raw store to cached target |
| // can only store on dword, which exactly matches swap_no_ret. |
| defm RAT_ATOMIC_XCHG_INT : RAT_ATOMIC<1, 34, "ATOMIC_XCHG_INT">; |
| defm RAT_ATOMIC_CMPXCHG_INT : RAT_ATOMIC<4, 36, "ATOMIC_CMPXCHG_INT">; |
| defm RAT_ATOMIC_ADD : RAT_ATOMIC<7, 39, "ATOMIC_ADD">; |
| defm RAT_ATOMIC_SUB : RAT_ATOMIC<8, 40, "ATOMIC_SUB">; |
| defm RAT_ATOMIC_RSUB : RAT_ATOMIC<9, 41, "ATOMIC_RSUB">; |
| defm RAT_ATOMIC_MIN_INT : RAT_ATOMIC<10, 42, "ATOMIC_MIN_INT">; |
| defm RAT_ATOMIC_MIN_UINT : RAT_ATOMIC<11, 43, "ATOMIC_MIN_UINT">; |
| defm RAT_ATOMIC_MAX_INT : RAT_ATOMIC<12, 44, "ATOMIC_MAX_INT">; |
| defm RAT_ATOMIC_MAX_UINT : RAT_ATOMIC<13, 45, "ATOMIC_MAX_UINT">; |
| defm RAT_ATOMIC_AND : RAT_ATOMIC<14, 46, "ATOMIC_AND">; |
| defm RAT_ATOMIC_OR : RAT_ATOMIC<15, 47, "ATOMIC_OR">; |
| defm RAT_ATOMIC_XOR : RAT_ATOMIC<16, 48, "ATOMIC_XOR">; |
| defm RAT_ATOMIC_INC_UINT : RAT_ATOMIC<18, 50, "ATOMIC_INC_UINT">; |
| defm RAT_ATOMIC_DEC_UINT : RAT_ATOMIC<19, 51, "ATOMIC_DEC_UINT">; |
| |
| } // End SubtargetPredicate = isEGorCayman |
| |
| //===----------------------------------------------------------------------===// |
| // Evergreen Only instructions |
| //===----------------------------------------------------------------------===// |
| |
| let SubtargetPredicate = isEG in { |
| |
| def RECIP_IEEE_eg : RECIP_IEEE_Common<0x86>; |
| defm DIV_eg : DIV_Common<RECIP_IEEE_eg>; |
| |
| def MULLO_INT_eg : MULLO_INT_Common<0x8F>; |
| def MULHI_INT_eg : MULHI_INT_Common<0x90>; |
| def MULLO_UINT_eg : MULLO_UINT_Common<0x91>; |
| def MULHI_UINT_eg : MULHI_UINT_Common<0x92>; |
| def MULHI_UINT24_eg : MULHI_UINT24_Common<0xb2>; |
| |
| def RECIP_UINT_eg : RECIP_UINT_Common<0x94>; |
| def RECIPSQRT_CLAMPED_eg : RECIPSQRT_CLAMPED_Common<0x87>; |
| def EXP_IEEE_eg : EXP_IEEE_Common<0x81>; |
| def LOG_IEEE_eg : LOG_IEEE_Common<0x83>; |
| def RECIP_CLAMPED_eg : RECIP_CLAMPED_Common<0x84>; |
| def RECIPSQRT_IEEE_eg : RECIPSQRT_IEEE_Common<0x89>; |
| def : RsqPat<RECIPSQRT_IEEE_eg, f32>; |
| def SIN_eg : SIN_Common<0x8D>; |
| def COS_eg : COS_Common<0x8E>; |
| |
| def : POW_Common <LOG_IEEE_eg, EXP_IEEE_eg, MUL>; |
| def : EGPat<(fsqrt f32:$src), (MUL $src, (RECIPSQRT_CLAMPED_eg $src))>; |
| } // End SubtargetPredicate = isEG |
| |
| //===----------------------------------------------------------------------===// |
| // Memory read/write instructions |
| //===----------------------------------------------------------------------===// |
| |
| let usesCustomInserter = 1 in { |
| |
| // 32-bit store |
| def RAT_WRITE_CACHELESS_32_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0x1, |
| (ins R600_TReg32_X:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop), |
| "STORE_RAW $rw_gpr, $index_gpr, $eop", |
| [(store_global i32:$rw_gpr, i32:$index_gpr)] |
| >; |
| |
| // 64-bit store |
| def RAT_WRITE_CACHELESS_64_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0x3, |
| (ins R600_Reg64:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop), |
| "STORE_RAW $rw_gpr.XY, $index_gpr, $eop", |
| [(store_global v2i32:$rw_gpr, i32:$index_gpr)] |
| >; |
| |
| //128-bit store |
| def RAT_WRITE_CACHELESS_128_eg : CF_MEM_RAT_CACHELESS <0x2, 0, 0xf, |
| (ins R600_Reg128:$rw_gpr, R600_TReg32_X:$index_gpr, InstFlag:$eop), |
| "STORE_RAW $rw_gpr.XYZW, $index_gpr, $eop", |
| [(store_global v4i32:$rw_gpr, i32:$index_gpr)] |
| >; |
| |
| def RAT_STORE_TYPED_eg: CF_MEM_RAT_STORE_TYPED<1>; |
| |
| } // End usesCustomInserter = 1 |
| |
| class VTX_READ_eg <string name, dag outs> |
| : VTX_WORD0_eg, VTX_READ<name, outs, []> { |
| |
| // Static fields |
| let VC_INST = 0; |
| let FETCH_TYPE = 2; |
| let FETCH_WHOLE_QUAD = 0; |
| let SRC_REL = 0; |
| // XXX: We can infer this field based on the SRC_GPR. This would allow us |
| // to store vertex addresses in any channel, not just X. |
| let SRC_SEL_X = 0; |
| |
| let Inst{31-0} = Word0; |
| } |
| |
| def VTX_READ_8_eg |
| : VTX_READ_eg <"VTX_READ_8 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| |
| let MEGA_FETCH_COUNT = 1; |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 1; // FMT_8 |
| } |
| |
| def VTX_READ_16_eg |
| : VTX_READ_eg <"VTX_READ_16 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| let MEGA_FETCH_COUNT = 2; |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 5; // FMT_16 |
| |
| } |
| |
| def VTX_READ_32_eg |
| : VTX_READ_eg <"VTX_READ_32 $dst_gpr, $src_gpr", |
| (outs R600_TReg32_X:$dst_gpr)> { |
| |
| let MEGA_FETCH_COUNT = 4; |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 7; // Masked |
| let DST_SEL_Z = 7; // Masked |
| let DST_SEL_W = 7; // Masked |
| let DATA_FORMAT = 0xD; // COLOR_32 |
| |
| // This is not really necessary, but there were some GPU hangs that appeared |
| // to be caused by ALU instructions in the next instruction group that wrote |
| // to the $src_gpr registers of the VTX_READ. |
| // e.g. |
| // %t3_x = VTX_READ_PARAM_32_eg killed %t2_x, 24 |
| // %t2_x = MOV %zero |
| //Adding this constraint prevents this from happening. |
| let Constraints = "$src_gpr.ptr = $dst_gpr"; |
| } |
| |
| def VTX_READ_64_eg |
| : VTX_READ_eg <"VTX_READ_64 $dst_gpr.XY, $src_gpr", |
| (outs R600_Reg64:$dst_gpr)> { |
| |
| let MEGA_FETCH_COUNT = 8; |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 1; |
| let DST_SEL_Z = 7; |
| let DST_SEL_W = 7; |
| let DATA_FORMAT = 0x1D; // COLOR_32_32 |
| } |
| |
| def VTX_READ_128_eg |
| : VTX_READ_eg <"VTX_READ_128 $dst_gpr.XYZW, $src_gpr", |
| (outs R600_Reg128:$dst_gpr)> { |
| |
| let MEGA_FETCH_COUNT = 16; |
| let DST_SEL_X = 0; |
| let DST_SEL_Y = 1; |
| let DST_SEL_Z = 2; |
| let DST_SEL_W = 3; |
| let DATA_FORMAT = 0x22; // COLOR_32_32_32_32 |
| |
| // XXX: Need to force VTX_READ_128 instructions to write to the same register |
| // that holds its buffer address to avoid potential hangs. We can't use |
| // the same constraint as VTX_READ_32_eg, because the $src_gpr.ptr and $dst |
| // registers are different sizes. |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from parameter memory space |
| //===----------------------------------------------------------------------===// |
| def : EGPat<(i32:$dst_gpr (vtx_id3_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_eg MEMxi:$src_gpr, 3)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id3_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_eg MEMxi:$src_gpr, 3)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_eg MEMxi:$src_gpr, 3)>; |
| def : EGPat<(v2i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_eg MEMxi:$src_gpr, 3)>; |
| def : EGPat<(v4i32:$dst_gpr (vtx_id3_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_eg MEMxi:$src_gpr, 3)>; |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from constant memory space |
| //===----------------------------------------------------------------------===// |
| def : EGPat<(i32:$dst_gpr (vtx_id2_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_eg MEMxi:$src_gpr, 2)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id2_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_eg MEMxi:$src_gpr, 2)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_eg MEMxi:$src_gpr, 2)>; |
| def : EGPat<(v2i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_eg MEMxi:$src_gpr, 2)>; |
| def : EGPat<(v4i32:$dst_gpr (vtx_id2_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_eg MEMxi:$src_gpr, 2)>; |
| |
| //===----------------------------------------------------------------------===// |
| // VTX Read from global memory space |
| //===----------------------------------------------------------------------===// |
| def : EGPat<(i32:$dst_gpr (vtx_id1_az_extloadi8 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_8_eg MEMxi:$src_gpr, 1)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id1_az_extloadi16 ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_16_eg MEMxi:$src_gpr, 1)>; |
| def : EGPat<(i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_32_eg MEMxi:$src_gpr, 1)>; |
| def : EGPat<(v2i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_64_eg MEMxi:$src_gpr, 1)>; |
| def : EGPat<(v4i32:$dst_gpr (vtx_id1_load ADDRVTX_READ:$src_gpr)), |
| (VTX_READ_128_eg MEMxi:$src_gpr, 1)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Evergreen / Cayman Instructions |
| //===----------------------------------------------------------------------===// |
| |
| let SubtargetPredicate = isEGorCayman in { |
| |
| multiclass AtomicPat<Instruction inst_ret, Instruction inst_noret, |
| SDPatternOperator node_ret, SDPatternOperator node_noret> { |
| // FIXME: Add _RTN version. We need per WI scratch location to store the old value |
| // EXTRACT_SUBREG here is dummy, we know the node has no uses |
| def : EGOrCaymanPat<(i32 (node_noret i32:$ptr, i32:$data)), |
| (EXTRACT_SUBREG (inst_noret |
| (INSERT_SUBREG (v4i32 (IMPLICIT_DEF)), $data, sub0), $ptr), sub1)>; |
| } |
| multiclass AtomicIncDecPat<Instruction inst_ret, Instruction inst_noret, |
| SDPatternOperator node_ret, SDPatternOperator node_noret, int C> { |
| // FIXME: Add _RTN version. We need per WI scratch location to store the old value |
| // EXTRACT_SUBREG here is dummy, we know the node has no uses |
| def : EGOrCaymanPat<(i32 (node_noret i32:$ptr, C)), |
| (EXTRACT_SUBREG (inst_noret |
| (INSERT_SUBREG (v4i32 (IMPLICIT_DEF)), (MOV_IMM_I32 -1), sub0), $ptr), sub1)>; |
| } |
| |
| // CMPSWAP is pattern is special |
| // EXTRACT_SUBREG here is dummy, we know the node has no uses |
| // FIXME: Add _RTN version. We need per WI scratch location to store the old value |
| def : EGOrCaymanPat<(i32 (atomic_cmp_swap_global_noret i32:$ptr, i32:$cmp, i32:$data)), |
| (EXTRACT_SUBREG (RAT_ATOMIC_CMPXCHG_INT_NORET |
| (INSERT_SUBREG |
| (INSERT_SUBREG (v4i32 (IMPLICIT_DEF)), $cmp, sub3), |
| $data, sub0), |
| $ptr), sub1)>; |
| |
| defm AtomicSwapPat : AtomicPat <RAT_ATOMIC_XCHG_INT_RTN, |
| RAT_ATOMIC_XCHG_INT_NORET, |
| atomic_swap_global_ret, |
| atomic_swap_global_noret>; |
| defm AtomicAddPat : AtomicPat <RAT_ATOMIC_ADD_RTN, RAT_ATOMIC_ADD_NORET, |
| atomic_add_global_ret, atomic_add_global_noret>; |
| defm AtomicSubPat : AtomicPat <RAT_ATOMIC_SUB_RTN, RAT_ATOMIC_SUB_NORET, |
| atomic_sub_global_ret, atomic_sub_global_noret>; |
| defm AtomicMinPat : AtomicPat <RAT_ATOMIC_MIN_INT_RTN, |
| RAT_ATOMIC_MIN_INT_NORET, |
| atomic_min_global_ret, atomic_min_global_noret>; |
| defm AtomicUMinPat : AtomicPat <RAT_ATOMIC_MIN_UINT_RTN, |
| RAT_ATOMIC_MIN_UINT_NORET, |
| atomic_umin_global_ret, atomic_umin_global_noret>; |
| defm AtomicMaxPat : AtomicPat <RAT_ATOMIC_MAX_INT_RTN, |
| RAT_ATOMIC_MAX_INT_NORET, |
| atomic_max_global_ret, atomic_max_global_noret>; |
| defm AtomicUMaxPat : AtomicPat <RAT_ATOMIC_MAX_UINT_RTN, |
| RAT_ATOMIC_MAX_UINT_NORET, |
| atomic_umax_global_ret, atomic_umax_global_noret>; |
| defm AtomicAndPat : AtomicPat <RAT_ATOMIC_AND_RTN, RAT_ATOMIC_AND_NORET, |
| atomic_and_global_ret, atomic_and_global_noret>; |
| defm AtomicOrPat : AtomicPat <RAT_ATOMIC_OR_RTN, RAT_ATOMIC_OR_NORET, |
| atomic_or_global_ret, atomic_or_global_noret>; |
| defm AtomicXorPat : AtomicPat <RAT_ATOMIC_XOR_RTN, RAT_ATOMIC_XOR_NORET, |
| atomic_xor_global_ret, atomic_xor_global_noret>; |
| defm AtomicIncAddPat : AtomicIncDecPat <RAT_ATOMIC_INC_UINT_RTN, |
| RAT_ATOMIC_INC_UINT_NORET, |
| atomic_add_global_ret, |
| atomic_add_global_noret, 1>; |
| defm AtomicIncSubPat : AtomicIncDecPat <RAT_ATOMIC_INC_UINT_RTN, |
| RAT_ATOMIC_INC_UINT_NORET, |
| atomic_sub_global_ret, |
| atomic_sub_global_noret, -1>; |
| defm AtomicDecAddPat : AtomicIncDecPat <RAT_ATOMIC_DEC_UINT_RTN, |
| RAT_ATOMIC_DEC_UINT_NORET, |
| atomic_add_global_ret, |
| atomic_add_global_noret, -1>; |
| defm AtomicDecSubPat : AtomicIncDecPat <RAT_ATOMIC_DEC_UINT_RTN, |
| RAT_ATOMIC_DEC_UINT_NORET, |
| atomic_sub_global_ret, |
| atomic_sub_global_noret, 1>; |
| |
| // Should be predicated on FeatureFP64 |
| // def FMA_64 : R600_3OP < |
| // 0xA, "FMA_64", |
| // [(set f64:$dst, (fma f64:$src0, f64:$src1, f64:$src2))] |
| // >; |
| |
| // BFE_UINT - bit_extract, an optimization for mask and shift |
| // Src0 = Input |
| // Src1 = Offset |
| // Src2 = Width |
| // |
| // bit_extract = (Input << (32 - Offset - Width)) >> (32 - Width) |
| // |
| // Example Usage: |
| // (Offset, Width) |
| // |
| // (0, 8) = (Input << 24) >> 24 = (Input & 0xff) >> 0 |
| // (8, 8) = (Input << 16) >> 24 = (Input & 0xffff) >> 8 |
| // (16, 8) = (Input << 8) >> 24 = (Input & 0xffffff) >> 16 |
| // (24, 8) = (Input << 0) >> 24 = (Input & 0xffffffff) >> 24 |
| def BFE_UINT_eg : R600_3OP <0x4, "BFE_UINT", |
| [(set i32:$dst, (AMDGPUbfe_u32 i32:$src0, i32:$src1, i32:$src2))], |
| VecALU |
| >; |
| |
| def BFE_INT_eg : R600_3OP <0x5, "BFE_INT", |
| [(set i32:$dst, (AMDGPUbfe_i32 i32:$src0, i32:$src1, i32:$src2))], |
| VecALU |
| >; |
| |
| defm : BFEPattern <BFE_UINT_eg, BFE_INT_eg, MOV_IMM_I32>; |
| |
| def BFI_INT_eg : R600_3OP <0x06, "BFI_INT", |
| [(set i32:$dst, (AMDGPUbfi i32:$src0, i32:$src1, i32:$src2))], |
| VecALU |
| >; |
| |
| def : EGOrCaymanPat<(i32 (sext_inreg i32:$src, i1)), |
| (BFE_INT_eg i32:$src, (i32 ZERO), (i32 ONE_INT))>; |
| def : EGOrCaymanPat<(i32 (sext_inreg i32:$src, i8)), |
| (BFE_INT_eg i32:$src, (i32 ZERO), (MOV_IMM_I32 8))>; |
| def : EGOrCaymanPat<(i32 (sext_inreg i32:$src, i16)), |
| (BFE_INT_eg i32:$src, (i32 ZERO), (MOV_IMM_I32 16))>; |
| |
| defm : BFIPatterns <BFI_INT_eg, MOV_IMM_I32, R600_Reg64>; |
| |
| def BFM_INT_eg : R600_2OP <0xA0, "BFM_INT", |
| [(set i32:$dst, (AMDGPUbfm i32:$src0, i32:$src1))], |
| VecALU |
| >; |
| |
| def MULADD_UINT24_eg : R600_3OP <0x10, "MULADD_UINT24", |
| [(set i32:$dst, (AMDGPUmad_u24 i32:$src0, i32:$src1, i32:$src2))], VecALU |
| >; |
| |
| def : UMad24Pat<MULADD_UINT24_eg>; |
| |
| def BIT_ALIGN_INT_eg : R600_3OP <0xC, "BIT_ALIGN_INT", [], VecALU>; |
| def : ROTRPattern <BIT_ALIGN_INT_eg>; |
| def MULADD_eg : MULADD_Common<0x14>; |
| def MULADD_IEEE_eg : MULADD_IEEE_Common<0x18>; |
| def FMA_eg : FMA_Common<0x7>; |
| def ASHR_eg : ASHR_Common<0x15>; |
| def LSHR_eg : LSHR_Common<0x16>; |
| def LSHL_eg : LSHL_Common<0x17>; |
| def CNDE_eg : CNDE_Common<0x19>; |
| def CNDGT_eg : CNDGT_Common<0x1A>; |
| def CNDGE_eg : CNDGE_Common<0x1B>; |
| def MUL_LIT_eg : MUL_LIT_Common<0x1F>; |
| def LOG_CLAMPED_eg : LOG_CLAMPED_Common<0x82>; |
| def MUL_UINT24_eg : R600_2OP <0xB5, "MUL_UINT24", |
| [(set i32:$dst, (AMDGPUmul_u24 i32:$src0, i32:$src1))], VecALU |
| >; |
| def DOT4_eg : DOT4_Common<0xBE>; |
| defm CUBE_eg : CUBE_Common<0xC0>; |
| |
| |
| def ADDC_UINT : R600_2OP_Helper <0x52, "ADDC_UINT", AMDGPUcarry>; |
| def SUBB_UINT : R600_2OP_Helper <0x53, "SUBB_UINT", AMDGPUborrow>; |
| |
| def FLT32_TO_FLT16 : R600_1OP_Helper <0xA2, "FLT32_TO_FLT16", AMDGPUfp_to_f16, VecALU>; |
| def FLT16_TO_FLT32 : R600_1OP_Helper <0xA3, "FLT16_TO_FLT32", f16_to_fp, VecALU>; |
| def BCNT_INT : R600_1OP_Helper <0xAA, "BCNT_INT", ctpop, VecALU>; |
| def FFBH_UINT : R600_1OP_Helper <0xAB, "FFBH_UINT", AMDGPUffbh_u32, VecALU>; |
| def FFBL_INT : R600_1OP_Helper <0xAC, "FFBL_INT", AMDGPUffbl_b32, VecALU>; |
| |
| let hasSideEffects = 1 in { |
| def MOVA_INT_eg : R600_1OP <0xCC, "MOVA_INT", [], VecALU>; |
| } |
| |
| def FLT_TO_INT_eg : FLT_TO_INT_Common<0x50> { |
| let Pattern = []; |
| let Itinerary = AnyALU; |
| } |
| |
| def INT_TO_FLT_eg : INT_TO_FLT_Common<0x9B>; |
| |
| def FLT_TO_UINT_eg : FLT_TO_UINT_Common<0x9A> { |
| let Pattern = []; |
| } |
| |
| def UINT_TO_FLT_eg : UINT_TO_FLT_Common<0x9C>; |
| |
| def GROUP_BARRIER : InstR600 < |
| (outs), (ins), " GROUP_BARRIER", [(int_r600_group_barrier)], AnyALU>, |
| R600ALU_Word0, |
| R600ALU_Word1_OP2 <0x54> { |
| |
| let dst = 0; |
| let dst_rel = 0; |
| let src0 = 0; |
| let src0_rel = 0; |
| let src0_neg = 0; |
| let src0_abs = 0; |
| let src1 = 0; |
| let src1_rel = 0; |
| let src1_neg = 0; |
| let src1_abs = 0; |
| let write = 0; |
| let omod = 0; |
| let clamp = 0; |
| let last = 1; |
| let bank_swizzle = 0; |
| let pred_sel = 0; |
| let update_exec_mask = 0; |
| let update_pred = 0; |
| |
| let Inst{31-0} = Word0; |
| let Inst{63-32} = Word1; |
| |
| let ALUInst = 1; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // LDS Instructions |
| //===----------------------------------------------------------------------===// |
| class R600_LDS <bits<6> op, dag outs, dag ins, string asm, |
| list<dag> pattern = []> : |
| |
| InstR600 <outs, ins, asm, pattern, XALU>, |
| R600_ALU_LDS_Word0, |
| R600LDS_Word1 { |
| |
| bits<6> offset = 0; |
| let lds_op = op; |
| |
| let Word1{27} = offset{0}; |
| let Word1{12} = offset{1}; |
| let Word1{28} = offset{2}; |
| let Word1{31} = offset{3}; |
| let Word0{12} = offset{4}; |
| let Word0{25} = offset{5}; |
| |
| |
| let Inst{31-0} = Word0; |
| let Inst{63-32} = Word1; |
| |
| let ALUInst = 1; |
| let HasNativeOperands = 1; |
| let UseNamedOperandTable = 1; |
| } |
| |
| class R600_LDS_1A <bits<6> lds_op, string name, list<dag> pattern> : R600_LDS < |
| lds_op, |
| (outs R600_Reg32:$dst), |
| (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel, |
| LAST:$last, R600_Pred:$pred_sel, |
| BANK_SWIZZLE:$bank_swizzle), |
| " "#name#" $last OQAP, $src0$src0_rel $pred_sel", |
| pattern |
| > { |
| |
| let src1 = 0; |
| let src1_rel = 0; |
| let src2 = 0; |
| let src2_rel = 0; |
| |
| let usesCustomInserter = 1; |
| let LDS_1A = 1; |
| let DisableEncoding = "$dst"; |
| } |
| |
| class R600_LDS_1A1D <bits<6> lds_op, dag outs, string name, list<dag> pattern, |
| string dst =""> : |
| R600_LDS < |
| lds_op, outs, |
| (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel, |
| R600_Reg32:$src1, REL:$src1_rel, SEL:$src1_sel, |
| LAST:$last, R600_Pred:$pred_sel, |
| BANK_SWIZZLE:$bank_swizzle), |
| " "#name#" $last "#dst#"$src0$src0_rel, $src1$src1_rel, $pred_sel", |
| pattern |
| > { |
| |
| field string BaseOp; |
| |
| let src2 = 0; |
| let src2_rel = 0; |
| let LDS_1A1D = 1; |
| } |
| |
| class R600_LDS_1A1D_NORET <bits<6> lds_op, string name, list<dag> pattern> : |
| R600_LDS_1A1D <lds_op, (outs), name, pattern> { |
| let BaseOp = name; |
| } |
| |
| class R600_LDS_1A1D_RET <bits<6> lds_op, string name, list<dag> pattern> : |
| R600_LDS_1A1D <lds_op, (outs R600_Reg32:$dst), name##"_RET", pattern, "OQAP, "> { |
| |
| let BaseOp = name; |
| let usesCustomInserter = 1; |
| let DisableEncoding = "$dst"; |
| } |
| |
| class R600_LDS_1A2D <bits<6> lds_op, dag outs, string name, list<dag> pattern, |
| string dst =""> : |
| R600_LDS < |
| lds_op, outs, |
| (ins R600_Reg32:$src0, REL:$src0_rel, SEL:$src0_sel, |
| R600_Reg32:$src1, REL:$src1_rel, SEL:$src1_sel, |
| R600_Reg32:$src2, REL:$src2_rel, SEL:$src2_sel, |
| LAST:$last, R600_Pred:$pred_sel, BANK_SWIZZLE:$bank_swizzle), |
| " "#name# "$last "#dst#"$src0$src0_rel, $src1$src1_rel, $src2$src2_rel, $pred_sel", |
| pattern> { |
| |
| field string BaseOp; |
| |
| let LDS_1A1D = 0; |
| let LDS_1A2D = 1; |
| } |
| |
| class R600_LDS_1A2D_NORET <bits<6> lds_op, string name, list<dag> pattern> : |
| R600_LDS_1A2D <lds_op, (outs), name, pattern> { |
| let BaseOp = name; |
| } |
| |
| class R600_LDS_1A2D_RET <bits<6> lds_op, string name, list<dag> pattern> : |
| R600_LDS_1A2D <lds_op, (outs R600_Reg32:$dst), name, pattern> { |
| |
| let BaseOp = name; |
| let usesCustomInserter = 1; |
| let DisableEncoding = "$dst"; |
| } |
| |
| def LDS_ADD : R600_LDS_1A1D_NORET <0x0, "LDS_ADD", [] >; |
| def LDS_SUB : R600_LDS_1A1D_NORET <0x1, "LDS_SUB", [] >; |
| def LDS_AND : R600_LDS_1A1D_NORET <0x9, "LDS_AND", [] >; |
| def LDS_OR : R600_LDS_1A1D_NORET <0xa, "LDS_OR", [] >; |
| def LDS_XOR : R600_LDS_1A1D_NORET <0xb, "LDS_XOR", [] >; |
| def LDS_WRXCHG: R600_LDS_1A1D_NORET <0xd, "LDS_WRXCHG", [] >; |
| def LDS_CMPST: R600_LDS_1A2D_NORET <0x10, "LDS_CMPST", [] >; |
| def LDS_MIN_INT : R600_LDS_1A1D_NORET <0x5, "LDS_MIN_INT", [] >; |
| def LDS_MAX_INT : R600_LDS_1A1D_NORET <0x6, "LDS_MAX_INT", [] >; |
| def LDS_MIN_UINT : R600_LDS_1A1D_NORET <0x7, "LDS_MIN_UINT", [] >; |
| def LDS_MAX_UINT : R600_LDS_1A1D_NORET <0x8, "LDS_MAX_UINT", [] >; |
| def LDS_WRITE : R600_LDS_1A1D_NORET <0xD, "LDS_WRITE", |
| [(store_local (i32 R600_Reg32:$src1), R600_Reg32:$src0)] |
| >; |
| def LDS_BYTE_WRITE : R600_LDS_1A1D_NORET<0x12, "LDS_BYTE_WRITE", |
| [(truncstorei8_local i32:$src1, i32:$src0)] |
| >; |
| def LDS_SHORT_WRITE : R600_LDS_1A1D_NORET<0x13, "LDS_SHORT_WRITE", |
| [(truncstorei16_local i32:$src1, i32:$src0)] |
| >; |
| def LDS_ADD_RET : R600_LDS_1A1D_RET <0x20, "LDS_ADD", |
| [(set i32:$dst, (atomic_load_add_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_SUB_RET : R600_LDS_1A1D_RET <0x21, "LDS_SUB", |
| [(set i32:$dst, (atomic_load_sub_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_AND_RET : R600_LDS_1A1D_RET <0x29, "LDS_AND", |
| [(set i32:$dst, (atomic_load_and_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_OR_RET : R600_LDS_1A1D_RET <0x2a, "LDS_OR", |
| [(set i32:$dst, (atomic_load_or_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_XOR_RET : R600_LDS_1A1D_RET <0x2b, "LDS_XOR", |
| [(set i32:$dst, (atomic_load_xor_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_MIN_INT_RET : R600_LDS_1A1D_RET <0x25, "LDS_MIN_INT", |
| [(set i32:$dst, (atomic_load_min_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_MAX_INT_RET : R600_LDS_1A1D_RET <0x26, "LDS_MAX_INT", |
| [(set i32:$dst, (atomic_load_max_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_MIN_UINT_RET : R600_LDS_1A1D_RET <0x27, "LDS_MIN_UINT", |
| [(set i32:$dst, (atomic_load_umin_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_MAX_UINT_RET : R600_LDS_1A1D_RET <0x28, "LDS_MAX_UINT", |
| [(set i32:$dst, (atomic_load_umax_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_WRXCHG_RET : R600_LDS_1A1D_RET <0x2d, "LDS_WRXCHG", |
| [(set i32:$dst, (atomic_swap_local i32:$src0, i32:$src1))] |
| >; |
| def LDS_CMPST_RET : R600_LDS_1A2D_RET <0x30, "LDS_CMPST", |
| [(set i32:$dst, (atomic_cmp_swap_local i32:$src0, i32:$src1, i32:$src2))] |
| >; |
| def LDS_READ_RET : R600_LDS_1A <0x32, "LDS_READ_RET", |
| [(set (i32 R600_Reg32:$dst), (load_local R600_Reg32:$src0))] |
| >; |
| def LDS_BYTE_READ_RET : R600_LDS_1A <0x36, "LDS_BYTE_READ_RET", |
| [(set i32:$dst, (sextloadi8_local i32:$src0))] |
| >; |
| def LDS_UBYTE_READ_RET : R600_LDS_1A <0x37, "LDS_UBYTE_READ_RET", |
| [(set i32:$dst, (az_extloadi8_local i32:$src0))] |
| >; |
| def LDS_SHORT_READ_RET : R600_LDS_1A <0x38, "LDS_SHORT_READ_RET", |
| [(set i32:$dst, (sextloadi16_local i32:$src0))] |
| >; |
| def LDS_USHORT_READ_RET : R600_LDS_1A <0x39, "LDS_USHORT_READ_RET", |
| [(set i32:$dst, (az_extloadi16_local i32:$src0))] |
| >; |
| |
| // TRUNC is used for the FLT_TO_INT instructions to work around a |
| // perceived problem where the rounding modes are applied differently |
| // depending on the instruction and the slot they are in. |
| // See: |
| // https://bugs.freedesktop.org/show_bug.cgi?id=50232 |
| // Mesa commit: a1a0974401c467cb86ef818f22df67c21774a38c |
| // |
| // XXX: Lowering SELECT_CC will sometimes generate fp_to_[su]int nodes, |
| // which do not need to be truncated since the fp values are 0.0f or 1.0f. |
| // We should look into handling these cases separately. |
| def : EGOrCaymanPat<(fp_to_sint f32:$src0), (FLT_TO_INT_eg (TRUNC $src0))>; |
| |
| def : EGOrCaymanPat<(fp_to_uint f32:$src0), (FLT_TO_UINT_eg (TRUNC $src0))>; |
| |
| // SHA-256 Patterns |
| defm : SHA256MaPattern <BFI_INT_eg, XOR_INT, R600_Reg64>; |
| |
| def EG_ExportSwz : ExportSwzInst { |
| let Word1{19-16} = 0; // BURST_COUNT |
| let Word1{20} = 0; // VALID_PIXEL_MODE |
| let Word1{21} = eop; |
| let Word1{29-22} = inst; |
| let Word1{30} = 0; // MARK |
| let Word1{31} = 1; // BARRIER |
| } |
| defm : ExportPattern<EG_ExportSwz, 83>; |
| |
| def EG_ExportBuf : ExportBufInst { |
| let Word1{19-16} = 0; // BURST_COUNT |
| let Word1{20} = 0; // VALID_PIXEL_MODE |
| let Word1{21} = eop; |
| let Word1{29-22} = inst; |
| let Word1{30} = 0; // MARK |
| let Word1{31} = 1; // BARRIER |
| } |
| defm : SteamOutputExportPattern<EG_ExportBuf, 0x40, 0x41, 0x42, 0x43>; |
| |
| def CF_TC_EG : CF_CLAUSE_EG<1, (ins i32imm:$ADDR, i32imm:$COUNT), |
| "TEX $COUNT @$ADDR"> { |
| let POP_COUNT = 0; |
| } |
| def CF_VC_EG : CF_CLAUSE_EG<2, (ins i32imm:$ADDR, i32imm:$COUNT), |
| "VTX $COUNT @$ADDR"> { |
| let POP_COUNT = 0; |
| } |
| def WHILE_LOOP_EG : CF_CLAUSE_EG<6, (ins i32imm:$ADDR), |
| "LOOP_START_DX10 @$ADDR"> { |
| let POP_COUNT = 0; |
| let COUNT = 0; |
| } |
| def END_LOOP_EG : CF_CLAUSE_EG<5, (ins i32imm:$ADDR), "END_LOOP @$ADDR"> { |
| let POP_COUNT = 0; |
| let COUNT = 0; |
| } |
| def LOOP_BREAK_EG : CF_CLAUSE_EG<9, (ins i32imm:$ADDR), |
| "LOOP_BREAK @$ADDR"> { |
| let POP_COUNT = 0; |
| let COUNT = 0; |
| } |
| def CF_CONTINUE_EG : CF_CLAUSE_EG<8, (ins i32imm:$ADDR), |
| "CONTINUE @$ADDR"> { |
| let POP_COUNT = 0; |
| let COUNT = 0; |
| } |
| def CF_JUMP_EG : CF_CLAUSE_EG<10, (ins i32imm:$ADDR, i32imm:$POP_COUNT), |
| "JUMP @$ADDR POP:$POP_COUNT"> { |
| let COUNT = 0; |
| } |
| def CF_PUSH_EG : CF_CLAUSE_EG<11, (ins i32imm:$ADDR, i32imm:$POP_COUNT), |
| "PUSH @$ADDR POP:$POP_COUNT"> { |
| let COUNT = 0; |
| } |
| def CF_ELSE_EG : CF_CLAUSE_EG<13, (ins i32imm:$ADDR, i32imm:$POP_COUNT), |
| "ELSE @$ADDR POP:$POP_COUNT"> { |
| let COUNT = 0; |
| } |
| def CF_CALL_FS_EG : CF_CLAUSE_EG<19, (ins), "CALL_FS"> { |
| let ADDR = 0; |
| let COUNT = 0; |
| let POP_COUNT = 0; |
| } |
| def POP_EG : CF_CLAUSE_EG<14, (ins i32imm:$ADDR, i32imm:$POP_COUNT), |
| "POP @$ADDR POP:$POP_COUNT"> { |
| let COUNT = 0; |
| } |
| def CF_END_EG : CF_CLAUSE_EG<0, (ins), "CF_END"> { |
| let COUNT = 0; |
| let POP_COUNT = 0; |
| let ADDR = 0; |
| let END_OF_PROGRAM = 1; |
| } |
| |
| } // End Predicates = [isEGorCayman] |
