| // Copyright (c) 2018 Google Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Validates correctness of extension SPIR-V instructions. |
| |
| #include <sstream> |
| #include <string> |
| #include <vector> |
| |
| #include "OpenCLDebugInfo100.h" |
| #include "source/diagnostic.h" |
| #include "source/enum_string_mapping.h" |
| #include "source/extensions.h" |
| #include "source/latest_version_glsl_std_450_header.h" |
| #include "source/latest_version_opencl_std_header.h" |
| #include "source/opcode.h" |
| #include "source/spirv_target_env.h" |
| #include "source/val/instruction.h" |
| #include "source/val/validate.h" |
| #include "source/val/validation_state.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| uint32_t GetSizeTBitWidth(const ValidationState_t& _) { |
| if (_.addressing_model() == SpvAddressingModelPhysical32) return 32; |
| |
| if (_.addressing_model() == SpvAddressingModelPhysical64) return 64; |
| |
| return 0; |
| } |
| |
| // Check that the operand of a debug info instruction |inst| at |word_index| |
| // is a result id of an instruction with |expected_opcode|. |
| spv_result_t ValidateOperandForDebugInfo( |
| ValidationState_t& _, const std::string& operand_name, |
| SpvOp expected_opcode, const Instruction* inst, uint32_t word_index, |
| const std::function<std::string()>& ext_inst_name) { |
| auto* operand = _.FindDef(inst->word(word_index)); |
| if (operand->opcode() != expected_opcode) { |
| spv_opcode_desc desc = nullptr; |
| if (_.grammar().lookupOpcode(expected_opcode, &desc) != SPV_SUCCESS || |
| !desc) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << operand_name << " is invalid"; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << operand_name << " must be a result id of " |
| << "Op" << desc->name; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| #define CHECK_OPERAND(NAME, opcode, index) \ |
| do { \ |
| auto result = ValidateOperandForDebugInfo(_, NAME, opcode, inst, index, \ |
| ext_inst_name); \ |
| if (result != SPV_SUCCESS) return result; \ |
| } while (0) |
| |
| // True if the operand of a debug info instruction |inst| at |word_index| |
| // satisifies |expectation| that is given as a function. Otherwise, |
| // returns false. |
| bool DoesDebugInfoOperandMatchExpectation( |
| const ValidationState_t& _, |
| const std::function<bool(OpenCLDebugInfo100Instructions)>& expectation, |
| const Instruction* inst, uint32_t word_index) { |
| auto* debug_inst = _.FindDef(inst->word(word_index)); |
| if (debug_inst->opcode() != SpvOpExtInst || |
| debug_inst->ext_inst_type() != SPV_EXT_INST_TYPE_OPENCL_DEBUGINFO_100 || |
| !expectation(OpenCLDebugInfo100Instructions(debug_inst->word(4)))) { |
| return false; |
| } |
| return true; |
| } |
| |
| // Check that the operand of a debug info instruction |inst| at |word_index| |
| // is a result id of an debug info instruction whose debug instruction type |
| // is |expected_debug_inst|. |
| spv_result_t ValidateDebugInfoOperand( |
| ValidationState_t& _, const std::string& debug_inst_name, |
| OpenCLDebugInfo100Instructions expected_debug_inst, const Instruction* inst, |
| uint32_t word_index, const std::function<std::string()>& ext_inst_name) { |
| std::function<bool(OpenCLDebugInfo100Instructions)> expectation = |
| [expected_debug_inst](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == expected_debug_inst; |
| }; |
| if (DoesDebugInfoOperandMatchExpectation(_, expectation, inst, word_index)) |
| return SPV_SUCCESS; |
| |
| spv_ext_inst_desc desc = nullptr; |
| _.grammar().lookupExtInst(SPV_EXT_INST_TYPE_OPENCL_DEBUGINFO_100, |
| expected_debug_inst, &desc); |
| if (_.grammar().lookupExtInst(SPV_EXT_INST_TYPE_OPENCL_DEBUGINFO_100, |
| expected_debug_inst, &desc) != SPV_SUCCESS || |
| !desc) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << debug_inst_name << " is invalid"; |
| } |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << debug_inst_name << " must be a result id of " |
| << desc->name; |
| } |
| |
| #define CHECK_DEBUG_OPERAND(NAME, debug_opcode, index) \ |
| do { \ |
| auto result = ValidateDebugInfoOperand(_, NAME, debug_opcode, inst, index, \ |
| ext_inst_name); \ |
| if (result != SPV_SUCCESS) return result; \ |
| } while (0) |
| |
| // Check that the operand of a debug info instruction |inst| at |word_index| |
| // is a result id of an debug info instruction with DebugTypeBasic. |
| spv_result_t ValidateOperandBaseType( |
| ValidationState_t& _, const Instruction* inst, uint32_t word_index, |
| const std::function<std::string()>& ext_inst_name) { |
| return ValidateDebugInfoOperand(_, "Base Type", |
| OpenCLDebugInfo100DebugTypeBasic, inst, |
| word_index, ext_inst_name); |
| } |
| |
| // Check that the operand of a debug info instruction |inst| at |word_index| |
| // is a result id of a debug lexical scope instruction which is one of |
| // DebugCompilationUnit, DebugFunction, DebugLexicalBlock, or |
| // DebugTypeComposite. |
| spv_result_t ValidateOperandLexicalScope( |
| ValidationState_t& _, const std::string& debug_inst_name, |
| const Instruction* inst, uint32_t word_index, |
| const std::function<std::string()>& ext_inst_name) { |
| std::function<bool(OpenCLDebugInfo100Instructions)> expectation = |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == OpenCLDebugInfo100DebugCompilationUnit || |
| dbg_inst == OpenCLDebugInfo100DebugFunction || |
| dbg_inst == OpenCLDebugInfo100DebugLexicalBlock || |
| dbg_inst == OpenCLDebugInfo100DebugTypeComposite; |
| }; |
| if (DoesDebugInfoOperandMatchExpectation(_, expectation, inst, word_index)) |
| return SPV_SUCCESS; |
| |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << debug_inst_name |
| << " must be a result id of a lexical scope"; |
| } |
| |
| // Check that the operand of a debug info instruction |inst| at |word_index| |
| // is a result id of a debug type instruction (See DebugTypeXXX in |
| // "4.3. Type instructions" section of OpenCL.DebugInfo.100 spec. |
| spv_result_t ValidateOperandDebugType( |
| ValidationState_t& _, const std::string& debug_inst_name, |
| const Instruction* inst, uint32_t word_index, |
| const std::function<std::string()>& ext_inst_name) { |
| std::function<bool(OpenCLDebugInfo100Instructions)> expectation = |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return OpenCLDebugInfo100DebugTypeBasic <= dbg_inst && |
| dbg_inst <= OpenCLDebugInfo100DebugTypePtrToMember; |
| }; |
| if (DoesDebugInfoOperandMatchExpectation(_, expectation, inst, word_index)) |
| return SPV_SUCCESS; |
| |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand " << debug_inst_name |
| << " is not a valid debug type"; |
| } |
| |
| } // anonymous namespace |
| |
| spv_result_t ValidateExtension(ValidationState_t& _, const Instruction* inst) { |
| if (spvIsWebGPUEnv(_.context()->target_env)) { |
| std::string extension = GetExtensionString(&(inst->c_inst())); |
| |
| if (extension != ExtensionToString(kSPV_KHR_vulkan_memory_model)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "For WebGPU, the only valid parameter to OpExtension is " |
| << "\"" << ExtensionToString(kSPV_KHR_vulkan_memory_model) |
| << "\"."; |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t ValidateExtInstImport(ValidationState_t& _, |
| const Instruction* inst) { |
| const auto name_id = 1; |
| if (spvIsWebGPUEnv(_.context()->target_env)) { |
| const std::string name(reinterpret_cast<const char*>( |
| inst->words().data() + inst->operands()[name_id].offset)); |
| if (name != "GLSL.std.450") { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "For WebGPU, the only valid parameter to OpExtInstImport is " |
| "\"GLSL.std.450\"."; |
| } |
| } |
| |
| if (!_.HasExtension(kSPV_KHR_non_semantic_info)) { |
| const std::string name(reinterpret_cast<const char*>( |
| inst->words().data() + inst->operands()[name_id].offset)); |
| if (name.find("NonSemantic.") == 0) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "NonSemantic extended instruction sets cannot be declared " |
| "without SPV_KHR_non_semantic_info."; |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t ValidateExtInst(ValidationState_t& _, const Instruction* inst) { |
| const uint32_t result_type = inst->type_id(); |
| const uint32_t num_operands = static_cast<uint32_t>(inst->operands().size()); |
| |
| const uint32_t ext_inst_set = inst->word(3); |
| const uint32_t ext_inst_index = inst->word(4); |
| const spv_ext_inst_type_t ext_inst_type = |
| spv_ext_inst_type_t(inst->ext_inst_type()); |
| |
| auto ext_inst_name = [&_, ext_inst_set, ext_inst_type, ext_inst_index]() { |
| spv_ext_inst_desc desc = nullptr; |
| if (_.grammar().lookupExtInst(ext_inst_type, ext_inst_index, &desc) != |
| SPV_SUCCESS || |
| !desc) { |
| return std::string("Unknown ExtInst"); |
| } |
| |
| auto* import_inst = _.FindDef(ext_inst_set); |
| assert(import_inst); |
| |
| std::ostringstream ss; |
| ss << reinterpret_cast<const char*>(import_inst->words().data() + 2); |
| ss << " "; |
| ss << desc->name; |
| |
| return ss.str(); |
| }; |
| |
| if (ext_inst_type == SPV_EXT_INST_TYPE_GLSL_STD_450) { |
| const GLSLstd450 ext_inst_key = GLSLstd450(ext_inst_index); |
| switch (ext_inst_key) { |
| case GLSLstd450Round: |
| case GLSLstd450RoundEven: |
| case GLSLstd450FAbs: |
| case GLSLstd450Trunc: |
| case GLSLstd450FSign: |
| case GLSLstd450Floor: |
| case GLSLstd450Ceil: |
| case GLSLstd450Fract: |
| case GLSLstd450Sqrt: |
| case GLSLstd450InverseSqrt: |
| case GLSLstd450FMin: |
| case GLSLstd450FMax: |
| case GLSLstd450FClamp: |
| case GLSLstd450FMix: |
| case GLSLstd450Step: |
| case GLSLstd450SmoothStep: |
| case GLSLstd450Fma: |
| case GLSLstd450Normalize: |
| case GLSLstd450FaceForward: |
| case GLSLstd450Reflect: |
| case GLSLstd450NMin: |
| case GLSLstd450NMax: |
| case GLSLstd450NClamp: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case GLSLstd450SAbs: |
| case GLSLstd450SSign: |
| case GLSLstd450UMin: |
| case GLSLstd450SMin: |
| case GLSLstd450UMax: |
| case GLSLstd450SMax: |
| case GLSLstd450UClamp: |
| case GLSLstd450SClamp: |
| case GLSLstd450FindILsb: |
| case GLSLstd450FindUMsb: |
| case GLSLstd450FindSMsb: { |
| if (!_.IsIntScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int scalar or vector type"; |
| } |
| |
| const uint32_t result_type_bit_width = _.GetBitWidth(result_type); |
| const uint32_t result_type_dimension = _.GetDimension(result_type); |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (!_.IsIntScalarOrVectorType(operand_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected all operands to be int scalars or vectors"; |
| } |
| |
| if (result_type_dimension != _.GetDimension(operand_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected all operands to have the same dimension as " |
| << "Result Type"; |
| } |
| |
| if (result_type_bit_width != _.GetBitWidth(operand_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected all operands to have the same bit width as " |
| << "Result Type"; |
| } |
| |
| if (ext_inst_key == GLSLstd450FindUMsb || |
| ext_inst_key == GLSLstd450FindSMsb) { |
| if (result_type_bit_width != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "this instruction is currently limited to 32-bit width " |
| << "components"; |
| } |
| } |
| } |
| break; |
| } |
| |
| case GLSLstd450Radians: |
| case GLSLstd450Degrees: |
| case GLSLstd450Sin: |
| case GLSLstd450Cos: |
| case GLSLstd450Tan: |
| case GLSLstd450Asin: |
| case GLSLstd450Acos: |
| case GLSLstd450Atan: |
| case GLSLstd450Sinh: |
| case GLSLstd450Cosh: |
| case GLSLstd450Tanh: |
| case GLSLstd450Asinh: |
| case GLSLstd450Acosh: |
| case GLSLstd450Atanh: |
| case GLSLstd450Exp: |
| case GLSLstd450Exp2: |
| case GLSLstd450Log: |
| case GLSLstd450Log2: |
| case GLSLstd450Atan2: |
| case GLSLstd450Pow: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 16 or 32-bit scalar or " |
| "vector float type"; |
| } |
| |
| const uint32_t result_type_bit_width = _.GetBitWidth(result_type); |
| if (result_type_bit_width != 16 && result_type_bit_width != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 16 or 32-bit scalar or " |
| "vector float type"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case GLSLstd450Determinant: { |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| uint32_t num_rows = 0; |
| uint32_t num_cols = 0; |
| uint32_t col_type = 0; |
| uint32_t component_type = 0; |
| if (!_.GetMatrixTypeInfo(x_type, &num_rows, &num_cols, &col_type, |
| &component_type) || |
| num_rows != num_cols) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to be a square matrix"; |
| } |
| |
| if (result_type != component_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X component type to be equal to " |
| << "Result Type"; |
| } |
| break; |
| } |
| |
| case GLSLstd450MatrixInverse: { |
| uint32_t num_rows = 0; |
| uint32_t num_cols = 0; |
| uint32_t col_type = 0; |
| uint32_t component_type = 0; |
| if (!_.GetMatrixTypeInfo(result_type, &num_rows, &num_cols, &col_type, |
| &component_type) || |
| num_rows != num_cols) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a square matrix"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (result_type != x_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Modf: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or vector float type"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t i_type = _.GetOperandTypeId(inst, 5); |
| |
| if (x_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| |
| uint32_t i_storage_class = 0; |
| uint32_t i_data_type = 0; |
| if (!_.GetPointerTypeInfo(i_type, &i_data_type, &i_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand I to be a pointer"; |
| } |
| |
| if (i_data_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand I data type to be equal to Result Type"; |
| } |
| |
| break; |
| } |
| |
| case GLSLstd450ModfStruct: { |
| std::vector<uint32_t> result_types; |
| if (!_.GetStructMemberTypes(result_type, &result_types) || |
| result_types.size() != 2 || |
| !_.IsFloatScalarOrVectorType(result_types[0]) || |
| result_types[1] != result_types[0]) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a struct with two identical " |
| << "scalar or vector float type members"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (x_type != result_types[0]) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to members of " |
| << "Result Type struct"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Frexp: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or vector float type"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t exp_type = _.GetOperandTypeId(inst, 5); |
| |
| if (x_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| |
| uint32_t exp_storage_class = 0; |
| uint32_t exp_data_type = 0; |
| if (!_.GetPointerTypeInfo(exp_type, &exp_data_type, |
| &exp_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Exp to be a pointer"; |
| } |
| |
| if (!_.IsIntScalarOrVectorType(exp_data_type) || |
| (!_.HasExtension(kSPV_AMD_gpu_shader_int16) && |
| _.GetBitWidth(exp_data_type) != 32) || |
| (_.HasExtension(kSPV_AMD_gpu_shader_int16) && |
| _.GetBitWidth(exp_data_type) != 16 && |
| _.GetBitWidth(exp_data_type) != 32)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Exp data type to be a " |
| << (_.HasExtension(kSPV_AMD_gpu_shader_int16) |
| ? "16-bit or 32-bit " |
| : "32-bit ") |
| << "int scalar or vector type"; |
| } |
| |
| if (_.GetDimension(result_type) != _.GetDimension(exp_data_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Exp data type to have the same component " |
| << "number as Result Type"; |
| } |
| |
| break; |
| } |
| |
| case GLSLstd450Ldexp: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or vector float type"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t exp_type = _.GetOperandTypeId(inst, 5); |
| |
| if (x_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| |
| if (!_.IsIntScalarOrVectorType(exp_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Exp to be a 32-bit int scalar " |
| << "or vector type"; |
| } |
| |
| if (_.GetDimension(result_type) != _.GetDimension(exp_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Exp to have the same component " |
| << "number as Result Type"; |
| } |
| |
| break; |
| } |
| |
| case GLSLstd450FrexpStruct: { |
| std::vector<uint32_t> result_types; |
| if (!_.GetStructMemberTypes(result_type, &result_types) || |
| result_types.size() != 2 || |
| !_.IsFloatScalarOrVectorType(result_types[0]) || |
| !_.IsIntScalarOrVectorType(result_types[1]) || |
| (!_.HasExtension(kSPV_AMD_gpu_shader_int16) && |
| _.GetBitWidth(result_types[1]) != 32) || |
| (_.HasExtension(kSPV_AMD_gpu_shader_int16) && |
| _.GetBitWidth(result_types[1]) != 16 && |
| _.GetBitWidth(result_types[1]) != 32) || |
| _.GetDimension(result_types[0]) != |
| _.GetDimension(result_types[1])) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a struct with two members, " |
| << "first member a float scalar or vector, second member a " |
| << (_.HasExtension(kSPV_AMD_gpu_shader_int16) |
| ? "16-bit or 32-bit " |
| : "32-bit ") |
| << "int scalar or vector with the same number of " |
| << "components as the first member"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (x_type != result_types[0]) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to the first member " |
| << "of Result Type struct"; |
| } |
| break; |
| } |
| |
| case GLSLstd450PackSnorm4x8: |
| case GLSLstd450PackUnorm4x8: { |
| if (!_.IsIntScalarType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be 32-bit int scalar type"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatVectorType(v_type) || _.GetDimension(v_type) != 4 || |
| _.GetBitWidth(v_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand V to be a 32-bit float vector of size 4"; |
| } |
| break; |
| } |
| |
| case GLSLstd450PackSnorm2x16: |
| case GLSLstd450PackUnorm2x16: |
| case GLSLstd450PackHalf2x16: { |
| if (!_.IsIntScalarType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be 32-bit int scalar type"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatVectorType(v_type) || _.GetDimension(v_type) != 2 || |
| _.GetBitWidth(v_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand V to be a 32-bit float vector of size 2"; |
| } |
| break; |
| } |
| |
| case GLSLstd450PackDouble2x32: { |
| if (!_.IsFloatScalarType(result_type) || |
| _.GetBitWidth(result_type) != 64) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be 64-bit float scalar type"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsIntVectorType(v_type) || _.GetDimension(v_type) != 2 || |
| _.GetBitWidth(v_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand V to be a 32-bit int vector of size 2"; |
| } |
| break; |
| } |
| |
| case GLSLstd450UnpackSnorm4x8: |
| case GLSLstd450UnpackUnorm4x8: { |
| if (!_.IsFloatVectorType(result_type) || |
| _.GetDimension(result_type) != 4 || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit float vector of size " |
| "4"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsIntScalarType(v_type) || _.GetBitWidth(v_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a 32-bit int scalar"; |
| } |
| break; |
| } |
| |
| case GLSLstd450UnpackSnorm2x16: |
| case GLSLstd450UnpackUnorm2x16: |
| case GLSLstd450UnpackHalf2x16: { |
| if (!_.IsFloatVectorType(result_type) || |
| _.GetDimension(result_type) != 2 || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit float vector of size " |
| "2"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsIntScalarType(v_type) || _.GetBitWidth(v_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a 32-bit int scalar"; |
| } |
| break; |
| } |
| |
| case GLSLstd450UnpackDouble2x32: { |
| if (!_.IsIntVectorType(result_type) || |
| _.GetDimension(result_type) != 2 || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit int vector of size " |
| "2"; |
| } |
| |
| const uint32_t v_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarType(v_type) || _.GetBitWidth(v_type) != 64) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand V to be a 64-bit float scalar"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Length: { |
| if (!_.IsFloatScalarType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar type"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarOrVectorType(x_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to be of float scalar or vector type"; |
| } |
| |
| if (result_type != _.GetComponentType(x_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X component type to be equal to Result " |
| "Type"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Distance: { |
| if (!_.IsFloatScalarType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar type"; |
| } |
| |
| const uint32_t p0_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarOrVectorType(p0_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P0 to be of float scalar or vector type"; |
| } |
| |
| if (result_type != _.GetComponentType(p0_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P0 component type to be equal to " |
| << "Result Type"; |
| } |
| |
| const uint32_t p1_type = _.GetOperandTypeId(inst, 5); |
| if (!_.IsFloatScalarOrVectorType(p1_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P1 to be of float scalar or vector type"; |
| } |
| |
| if (result_type != _.GetComponentType(p1_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P1 component type to be equal to " |
| << "Result Type"; |
| } |
| |
| if (_.GetDimension(p0_type) != _.GetDimension(p1_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operands P0 and P1 to have the same number of " |
| << "components"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Cross: { |
| if (!_.IsFloatVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float vector type"; |
| } |
| |
| if (_.GetDimension(result_type) != 3) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have 3 components"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t y_type = _.GetOperandTypeId(inst, 5); |
| |
| if (x_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| |
| if (y_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Y type to be equal to Result Type"; |
| } |
| break; |
| } |
| |
| case GLSLstd450Refract: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t i_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t n_type = _.GetOperandTypeId(inst, 5); |
| const uint32_t eta_type = _.GetOperandTypeId(inst, 6); |
| |
| if (result_type != i_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand I to be of type equal to Result Type"; |
| } |
| |
| if (result_type != n_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand N to be of type equal to Result Type"; |
| } |
| |
| if (!_.IsFloatScalarType(eta_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Eta to be a float scalar"; |
| } |
| break; |
| } |
| |
| case GLSLstd450InterpolateAtCentroid: |
| case GLSLstd450InterpolateAtSample: |
| case GLSLstd450InterpolateAtOffset: { |
| if (!_.HasCapability(SpvCapabilityInterpolationFunction)) { |
| return _.diag(SPV_ERROR_INVALID_CAPABILITY, inst) |
| << ext_inst_name() |
| << " requires capability InterpolationFunction"; |
| } |
| |
| if (!_.IsFloatScalarOrVectorType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit float scalar " |
| << "or vector type"; |
| } |
| |
| const uint32_t interpolant_type = _.GetOperandTypeId(inst, 4); |
| uint32_t interpolant_storage_class = 0; |
| uint32_t interpolant_data_type = 0; |
| if (!_.GetPointerTypeInfo(interpolant_type, &interpolant_data_type, |
| &interpolant_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Interpolant to be a pointer"; |
| } |
| |
| if (result_type != interpolant_data_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Interpolant data type to be equal to Result Type"; |
| } |
| |
| if (interpolant_storage_class != SpvStorageClassInput) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Interpolant storage class to be Input"; |
| } |
| |
| if (ext_inst_key == GLSLstd450InterpolateAtSample) { |
| const uint32_t sample_type = _.GetOperandTypeId(inst, 5); |
| if (!_.IsIntScalarType(sample_type) || |
| _.GetBitWidth(sample_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Sample to be 32-bit integer"; |
| } |
| } |
| |
| if (ext_inst_key == GLSLstd450InterpolateAtOffset) { |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 5); |
| if (!_.IsFloatVectorType(offset_type) || |
| _.GetDimension(offset_type) != 2 || |
| _.GetBitWidth(offset_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Offset to be a vector of 2 32-bit floats"; |
| } |
| } |
| |
| _.function(inst->function()->id()) |
| ->RegisterExecutionModelLimitation( |
| SpvExecutionModelFragment, |
| ext_inst_name() + |
| std::string(" requires Fragment execution model")); |
| break; |
| } |
| |
| case GLSLstd450IMix: { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Extended instruction GLSLstd450IMix is not supported"; |
| } |
| |
| case GLSLstd450Bad: { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Encountered extended instruction GLSLstd450Bad"; |
| } |
| |
| case GLSLstd450Count: { |
| assert(0); |
| break; |
| } |
| } |
| } else if (ext_inst_type == SPV_EXT_INST_TYPE_OPENCL_STD) { |
| const OpenCLLIB::Entrypoints ext_inst_key = |
| OpenCLLIB::Entrypoints(ext_inst_index); |
| switch (ext_inst_key) { |
| case OpenCLLIB::Acos: |
| case OpenCLLIB::Acosh: |
| case OpenCLLIB::Acospi: |
| case OpenCLLIB::Asin: |
| case OpenCLLIB::Asinh: |
| case OpenCLLIB::Asinpi: |
| case OpenCLLIB::Atan: |
| case OpenCLLIB::Atan2: |
| case OpenCLLIB::Atanh: |
| case OpenCLLIB::Atanpi: |
| case OpenCLLIB::Atan2pi: |
| case OpenCLLIB::Cbrt: |
| case OpenCLLIB::Ceil: |
| case OpenCLLIB::Copysign: |
| case OpenCLLIB::Cos: |
| case OpenCLLIB::Cosh: |
| case OpenCLLIB::Cospi: |
| case OpenCLLIB::Erfc: |
| case OpenCLLIB::Erf: |
| case OpenCLLIB::Exp: |
| case OpenCLLIB::Exp2: |
| case OpenCLLIB::Exp10: |
| case OpenCLLIB::Expm1: |
| case OpenCLLIB::Fabs: |
| case OpenCLLIB::Fdim: |
| case OpenCLLIB::Floor: |
| case OpenCLLIB::Fma: |
| case OpenCLLIB::Fmax: |
| case OpenCLLIB::Fmin: |
| case OpenCLLIB::Fmod: |
| case OpenCLLIB::Hypot: |
| case OpenCLLIB::Lgamma: |
| case OpenCLLIB::Log: |
| case OpenCLLIB::Log2: |
| case OpenCLLIB::Log10: |
| case OpenCLLIB::Log1p: |
| case OpenCLLIB::Logb: |
| case OpenCLLIB::Mad: |
| case OpenCLLIB::Maxmag: |
| case OpenCLLIB::Minmag: |
| case OpenCLLIB::Nextafter: |
| case OpenCLLIB::Pow: |
| case OpenCLLIB::Powr: |
| case OpenCLLIB::Remainder: |
| case OpenCLLIB::Rint: |
| case OpenCLLIB::Round: |
| case OpenCLLIB::Rsqrt: |
| case OpenCLLIB::Sin: |
| case OpenCLLIB::Sinh: |
| case OpenCLLIB::Sinpi: |
| case OpenCLLIB::Sqrt: |
| case OpenCLLIB::Tan: |
| case OpenCLLIB::Tanh: |
| case OpenCLLIB::Tanpi: |
| case OpenCLLIB::Tgamma: |
| case OpenCLLIB::Trunc: |
| case OpenCLLIB::Half_cos: |
| case OpenCLLIB::Half_divide: |
| case OpenCLLIB::Half_exp: |
| case OpenCLLIB::Half_exp2: |
| case OpenCLLIB::Half_exp10: |
| case OpenCLLIB::Half_log: |
| case OpenCLLIB::Half_log2: |
| case OpenCLLIB::Half_log10: |
| case OpenCLLIB::Half_powr: |
| case OpenCLLIB::Half_recip: |
| case OpenCLLIB::Half_rsqrt: |
| case OpenCLLIB::Half_sin: |
| case OpenCLLIB::Half_sqrt: |
| case OpenCLLIB::Half_tan: |
| case OpenCLLIB::Native_cos: |
| case OpenCLLIB::Native_divide: |
| case OpenCLLIB::Native_exp: |
| case OpenCLLIB::Native_exp2: |
| case OpenCLLIB::Native_exp10: |
| case OpenCLLIB::Native_log: |
| case OpenCLLIB::Native_log2: |
| case OpenCLLIB::Native_log10: |
| case OpenCLLIB::Native_powr: |
| case OpenCLLIB::Native_recip: |
| case OpenCLLIB::Native_rsqrt: |
| case OpenCLLIB::Native_sin: |
| case OpenCLLIB::Native_sqrt: |
| case OpenCLLIB::Native_tan: |
| case OpenCLLIB::FClamp: |
| case OpenCLLIB::Degrees: |
| case OpenCLLIB::FMax_common: |
| case OpenCLLIB::FMin_common: |
| case OpenCLLIB::Mix: |
| case OpenCLLIB::Radians: |
| case OpenCLLIB::Step: |
| case OpenCLLIB::Smoothstep: |
| case OpenCLLIB::Sign: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Fract: |
| case OpenCLLIB::Modf: |
| case OpenCLLIB::Sincos: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (result_type != x_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected type of operand X to be equal to Result Type"; |
| } |
| |
| const uint32_t p_type = _.GetOperandTypeId(inst, 5); |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected the last operand to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected storage class of the pointer to be Generic, " |
| "CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (result_type != p_data_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected data type of the pointer to be equal to Result " |
| "Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Frexp: |
| case OpenCLLIB::Lgamma_r: |
| case OpenCLLIB::Remquo: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| uint32_t operand_index = 4; |
| const uint32_t x_type = _.GetOperandTypeId(inst, operand_index++); |
| if (result_type != x_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected type of operand X to be equal to Result Type"; |
| } |
| |
| if (ext_inst_key == OpenCLLIB::Remquo) { |
| const uint32_t y_type = _.GetOperandTypeId(inst, operand_index++); |
| if (result_type != y_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected type of operand Y to be equal to Result Type"; |
| } |
| } |
| |
| const uint32_t p_type = _.GetOperandTypeId(inst, operand_index++); |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected the last operand to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected storage class of the pointer to be Generic, " |
| "CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (!_.IsIntScalarOrVectorType(p_data_type) || |
| _.GetBitWidth(p_data_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected data type of the pointer to be a 32-bit int " |
| "scalar or vector type"; |
| } |
| |
| if (_.GetDimension(p_data_type) != num_components) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected data type of the pointer to have the same number " |
| "of components as Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Ilogb: { |
| if (!_.IsIntScalarOrVectorType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit int scalar or vector " |
| "type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarOrVectorType(x_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to be a float scalar or vector"; |
| } |
| |
| if (_.GetDimension(x_type) != num_components) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to have the same number of components " |
| "as Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Ldexp: |
| case OpenCLLIB::Pown: |
| case OpenCLLIB::Rootn: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| if (result_type != x_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected type of operand X to be equal to Result Type"; |
| } |
| |
| const uint32_t exp_type = _.GetOperandTypeId(inst, 5); |
| if (!_.IsIntScalarOrVectorType(exp_type) || |
| _.GetBitWidth(exp_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected the exponent to be a 32-bit int scalar or vector"; |
| } |
| |
| if (_.GetDimension(exp_type) != num_components) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected the exponent to have the same number of " |
| "components as Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Nan: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t nancode_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsIntScalarOrVectorType(nancode_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Nancode to be an int scalar or vector type"; |
| } |
| |
| if (_.GetDimension(nancode_type) != num_components) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Nancode to have the same number of components as " |
| "Result Type"; |
| } |
| |
| if (_.GetBitWidth(result_type) != _.GetBitWidth(nancode_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Nancode to have the same bit width as Result " |
| "Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::SAbs: |
| case OpenCLLIB::SAbs_diff: |
| case OpenCLLIB::SAdd_sat: |
| case OpenCLLIB::UAdd_sat: |
| case OpenCLLIB::SHadd: |
| case OpenCLLIB::UHadd: |
| case OpenCLLIB::SRhadd: |
| case OpenCLLIB::URhadd: |
| case OpenCLLIB::SClamp: |
| case OpenCLLIB::UClamp: |
| case OpenCLLIB::Clz: |
| case OpenCLLIB::Ctz: |
| case OpenCLLIB::SMad_hi: |
| case OpenCLLIB::UMad_sat: |
| case OpenCLLIB::SMad_sat: |
| case OpenCLLIB::SMax: |
| case OpenCLLIB::UMax: |
| case OpenCLLIB::SMin: |
| case OpenCLLIB::UMin: |
| case OpenCLLIB::SMul_hi: |
| case OpenCLLIB::Rotate: |
| case OpenCLLIB::SSub_sat: |
| case OpenCLLIB::USub_sat: |
| case OpenCLLIB::Popcount: |
| case OpenCLLIB::UAbs: |
| case OpenCLLIB::UAbs_diff: |
| case OpenCLLIB::UMul_hi: |
| case OpenCLLIB::UMad_hi: { |
| if (!_.IsIntScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case OpenCLLIB::U_Upsample: |
| case OpenCLLIB::S_Upsample: { |
| if (!_.IsIntScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int scalar or vector " |
| "type"; |
| } |
| |
| const uint32_t result_num_components = _.GetDimension(result_type); |
| if (result_num_components > 4 && result_num_components != 8 && |
| result_num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t result_bit_width = _.GetBitWidth(result_type); |
| if (result_bit_width != 16 && result_bit_width != 32 && |
| result_bit_width != 64) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected bit width of Result Type components to be 16, 32 " |
| "or 64"; |
| } |
| |
| const uint32_t hi_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t lo_type = _.GetOperandTypeId(inst, 5); |
| |
| if (hi_type != lo_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Hi and Lo operands to have the same type"; |
| } |
| |
| if (result_num_components != _.GetDimension(hi_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Hi and Lo operands to have the same number of " |
| "components as Result Type"; |
| } |
| |
| if (result_bit_width != 2 * _.GetBitWidth(hi_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected bit width of components of Hi and Lo operands to " |
| "be half of the bit width of components of Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::SMad24: |
| case OpenCLLIB::UMad24: |
| case OpenCLLIB::SMul24: |
| case OpenCLLIB::UMul24: { |
| if (!_.IsIntScalarOrVectorType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit int scalar or vector " |
| "type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Cross: { |
| if (!_.IsFloatVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components != 3 && num_components != 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have 3 or 4 components"; |
| } |
| |
| const uint32_t x_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t y_type = _.GetOperandTypeId(inst, 5); |
| |
| if (x_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X type to be equal to Result Type"; |
| } |
| |
| if (y_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Y type to be equal to Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Distance: |
| case OpenCLLIB::Fast_distance: { |
| if (!_.IsFloatScalarType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar type"; |
| } |
| |
| const uint32_t p0_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarOrVectorType(p0_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P0 to be of float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(p0_type); |
| if (num_components > 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P0 to have no more than 4 components"; |
| } |
| |
| if (result_type != _.GetComponentType(p0_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P0 component type to be equal to " |
| << "Result Type"; |
| } |
| |
| const uint32_t p1_type = _.GetOperandTypeId(inst, 5); |
| if (p0_type != p1_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operands P0 and P1 to be of the same type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Length: |
| case OpenCLLIB::Fast_length: { |
| if (!_.IsFloatScalarType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar type"; |
| } |
| |
| const uint32_t p_type = _.GetOperandTypeId(inst, 4); |
| if (!_.IsFloatScalarOrVectorType(p_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a float scalar or vector"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(p_type); |
| if (num_components > 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to have no more than 4 components"; |
| } |
| |
| if (result_type != _.GetComponentType(p_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P component type to be equal to Result " |
| "Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Normalize: |
| case OpenCLLIB::Fast_normalize: { |
| if (!_.IsFloatScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar or vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have no more than 4 components"; |
| } |
| |
| const uint32_t p_type = _.GetOperandTypeId(inst, 4); |
| if (p_type != result_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P type to be equal to Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Bitselect: { |
| if (!_.IsFloatScalarOrVectorType(result_type) && |
| !_.IsIntScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int or float scalar or " |
| "vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| for (uint32_t operand_index = 4; operand_index < num_operands; |
| ++operand_index) { |
| const uint32_t operand_type = _.GetOperandTypeId(inst, operand_index); |
| if (result_type != operand_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected types of all operands to be equal to Result " |
| "Type"; |
| } |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Select: { |
| if (!_.IsFloatScalarOrVectorType(result_type) && |
| !_.IsIntScalarOrVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int or float scalar or " |
| "vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t a_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t b_type = _.GetOperandTypeId(inst, 5); |
| const uint32_t c_type = _.GetOperandTypeId(inst, 6); |
| |
| if (result_type != a_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand A type to be equal to Result Type"; |
| } |
| |
| if (result_type != b_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand B type to be equal to Result Type"; |
| } |
| |
| if (!_.IsIntScalarOrVectorType(c_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand C to be an int scalar or vector"; |
| } |
| |
| if (num_components != _.GetDimension(c_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand C to have the same number of components " |
| "as Result Type"; |
| } |
| |
| if (_.GetBitWidth(result_type) != _.GetBitWidth(c_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand C to have the same bit width as Result " |
| "Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Vloadn: { |
| if (!_.IsFloatVectorType(result_type) && |
| !_.IsIntVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int or float vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have 2, 3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t p_type = _.GetOperandTypeId(inst, 5); |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(offset_type) || |
| _.GetBitWidth(offset_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Offset to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassUniformConstant && |
| p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P storage class to be UniformConstant, " |
| "Generic, CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (_.GetComponentType(result_type) != p_data_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P data type to be equal to component " |
| "type of Result Type"; |
| } |
| |
| const uint32_t n_value = inst->word(7); |
| if (num_components != n_value) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected literal N to be equal to the number of " |
| "components of Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Vstoren: { |
| if (_.GetIdOpcode(result_type) != SpvOpTypeVoid) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": expected Result Type to be void"; |
| } |
| |
| const uint32_t data_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 5); |
| const uint32_t p_type = _.GetOperandTypeId(inst, 6); |
| |
| if (!_.IsFloatVectorType(data_type) && !_.IsIntVectorType(data_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Data to be an int or float vector"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(data_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Data to have 2, 3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(offset_type) || |
| _.GetBitWidth(offset_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Offset to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P storage class to be Generic, " |
| "CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (_.GetComponentType(data_type) != p_data_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P data type to be equal to the type of " |
| "operand Data components"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Vload_half: { |
| if (!_.IsFloatScalarType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float scalar type"; |
| } |
| |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t p_type = _.GetOperandTypeId(inst, 5); |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(offset_type) || |
| _.GetBitWidth(offset_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Offset to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassUniformConstant && |
| p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P storage class to be UniformConstant, " |
| "Generic, CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (!_.IsFloatScalarType(p_data_type) || |
| _.GetBitWidth(p_data_type) != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P data type to be 16-bit float scalar"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Vload_halfn: |
| case OpenCLLIB::Vloada_halfn: { |
| if (!_.IsFloatVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a float vector type"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(result_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have 2, 3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t p_type = _.GetOperandTypeId(inst, 5); |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(offset_type) || |
| _.GetBitWidth(offset_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Offset to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassUniformConstant && |
| p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P storage class to be UniformConstant, " |
| "Generic, CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (!_.IsFloatScalarType(p_data_type) || |
| _.GetBitWidth(p_data_type) != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P data type to be 16-bit float scalar"; |
| } |
| |
| const uint32_t n_value = inst->word(7); |
| if (num_components != n_value) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected literal N to be equal to the number of " |
| "components of Result Type"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Vstore_half: |
| case OpenCLLIB::Vstore_half_r: |
| case OpenCLLIB::Vstore_halfn: |
| case OpenCLLIB::Vstore_halfn_r: |
| case OpenCLLIB::Vstorea_halfn: |
| case OpenCLLIB::Vstorea_halfn_r: { |
| if (_.GetIdOpcode(result_type) != SpvOpTypeVoid) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": expected Result Type to be void"; |
| } |
| |
| const uint32_t data_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t offset_type = _.GetOperandTypeId(inst, 5); |
| const uint32_t p_type = _.GetOperandTypeId(inst, 6); |
| const uint32_t data_type_bit_width = _.GetBitWidth(data_type); |
| |
| if (ext_inst_key == OpenCLLIB::Vstore_half || |
| ext_inst_key == OpenCLLIB::Vstore_half_r) { |
| if (!_.IsFloatScalarType(data_type) || |
| (data_type_bit_width != 32 && data_type_bit_width != 64)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Data to be a 32 or 64-bit float scalar"; |
| } |
| } else { |
| if (!_.IsFloatVectorType(data_type) || |
| (data_type_bit_width != 32 && data_type_bit_width != 64)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Data to be a 32 or 64-bit float vector"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(data_type); |
| if (num_components > 4 && num_components != 8 && |
| num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Data to have 2, 3, 4, 8 or 16 components"; |
| } |
| } |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(offset_type) || |
| _.GetBitWidth(offset_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Offset to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassGeneric && |
| p_storage_class != SpvStorageClassCrossWorkgroup && |
| p_storage_class != SpvStorageClassWorkgroup && |
| p_storage_class != SpvStorageClassFunction) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P storage class to be Generic, " |
| "CrossWorkgroup, Workgroup or Function"; |
| } |
| |
| if (!_.IsFloatScalarType(p_data_type) || |
| _.GetBitWidth(p_data_type) != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand P data type to be 16-bit float scalar"; |
| } |
| |
| // Rounding mode enum is checked by assembler. |
| break; |
| } |
| |
| case OpenCLLIB::Shuffle: |
| case OpenCLLIB::Shuffle2: { |
| if (!_.IsFloatVectorType(result_type) && |
| !_.IsIntVectorType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be an int or float vector type"; |
| } |
| |
| const uint32_t result_num_components = _.GetDimension(result_type); |
| if (result_num_components != 2 && result_num_components != 4 && |
| result_num_components != 8 && result_num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to have 2, 4, 8 or 16 components"; |
| } |
| |
| uint32_t operand_index = 4; |
| const uint32_t x_type = _.GetOperandTypeId(inst, operand_index++); |
| |
| if (ext_inst_key == OpenCLLIB::Shuffle2) { |
| const uint32_t y_type = _.GetOperandTypeId(inst, operand_index++); |
| if (x_type != y_type) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operands X and Y to be of the same type"; |
| } |
| } |
| |
| const uint32_t shuffle_mask_type = |
| _.GetOperandTypeId(inst, operand_index++); |
| |
| if (!_.IsFloatVectorType(x_type) && !_.IsIntVectorType(x_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to be an int or float vector"; |
| } |
| |
| const uint32_t x_num_components = _.GetDimension(x_type); |
| if (x_num_components != 2 && x_num_components != 4 && |
| x_num_components != 8 && x_num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X to have 2, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t result_component_type = _.GetComponentType(result_type); |
| |
| if (result_component_type != _.GetComponentType(x_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand X and Result Type to have equal " |
| "component types"; |
| } |
| |
| if (!_.IsIntVectorType(shuffle_mask_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Shuffle Mask to be an int vector"; |
| } |
| |
| if (result_num_components != _.GetDimension(shuffle_mask_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Shuffle Mask to have the same number of " |
| "components as Result Type"; |
| } |
| |
| if (_.GetBitWidth(result_component_type) != |
| _.GetBitWidth(shuffle_mask_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Shuffle Mask components to have the same " |
| "bit width as Result Type components"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Printf: { |
| if (!_.IsIntScalarType(result_type) || |
| _.GetBitWidth(result_type) != 32) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a 32-bit int type"; |
| } |
| |
| const uint32_t format_type = _.GetOperandTypeId(inst, 4); |
| uint32_t format_storage_class = 0; |
| uint32_t format_data_type = 0; |
| if (!_.GetPointerTypeInfo(format_type, &format_data_type, |
| &format_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Format to be a pointer"; |
| } |
| |
| if (format_storage_class != SpvStorageClassUniformConstant) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Format storage class to be UniformConstant"; |
| } |
| |
| if (!_.IsIntScalarType(format_data_type) || |
| _.GetBitWidth(format_data_type) != 8) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Format data type to be 8-bit int"; |
| } |
| break; |
| } |
| |
| case OpenCLLIB::Prefetch: { |
| if (_.GetIdOpcode(result_type) != SpvOpTypeVoid) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": expected Result Type to be void"; |
| } |
| |
| const uint32_t p_type = _.GetOperandTypeId(inst, 4); |
| const uint32_t num_elements_type = _.GetOperandTypeId(inst, 5); |
| |
| uint32_t p_storage_class = 0; |
| uint32_t p_data_type = 0; |
| if (!_.GetPointerTypeInfo(p_type, &p_data_type, &p_storage_class)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Ptr to be a pointer"; |
| } |
| |
| if (p_storage_class != SpvStorageClassCrossWorkgroup) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Ptr storage class to be CrossWorkgroup"; |
| } |
| |
| if (!_.IsFloatScalarOrVectorType(p_data_type) && |
| !_.IsIntScalarOrVectorType(p_data_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Ptr data type to be int or float scalar or " |
| "vector"; |
| } |
| |
| const uint32_t num_components = _.GetDimension(p_data_type); |
| if (num_components > 4 && num_components != 8 && num_components != 16) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected Result Type to be a scalar or a vector with 2, " |
| "3, 4, 8 or 16 components"; |
| } |
| |
| const uint32_t size_t_bit_width = GetSizeTBitWidth(_); |
| if (!size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() |
| << " can only be used with physical addressing models"; |
| } |
| |
| if (!_.IsIntScalarType(num_elements_type) || |
| _.GetBitWidth(num_elements_type) != size_t_bit_width) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Num Elements to be of type size_t (" |
| << size_t_bit_width |
| << "-bit integer for the addressing model used in the module)"; |
| } |
| break; |
| } |
| } |
| } else if (ext_inst_type == SPV_EXT_INST_TYPE_OPENCL_DEBUGINFO_100) { |
| if (!_.IsVoidType(result_type)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected result type must be a result id of " |
| << "OpTypeVoid"; |
| } |
| |
| auto num_words = inst->words().size(); |
| |
| const OpenCLDebugInfo100Instructions ext_inst_key = |
| OpenCLDebugInfo100Instructions(ext_inst_index); |
| switch (ext_inst_key) { |
| case OpenCLDebugInfo100DebugInfoNone: |
| case OpenCLDebugInfo100DebugNoScope: |
| case OpenCLDebugInfo100DebugOperation: |
| // The binary parser validates the opcode for DebugInfoNone, |
| // DebugNoScope, DebugOperation, and the literal values don't need |
| // further checks. |
| break; |
| case OpenCLDebugInfo100DebugCompilationUnit: { |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| break; |
| } |
| case OpenCLDebugInfo100DebugSource: { |
| CHECK_OPERAND("File", SpvOpString, 5); |
| if (num_words == 7) CHECK_OPERAND("Text", SpvOpString, 6); |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeBasic: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| CHECK_OPERAND("Size", SpvOpConstant, 6); |
| // "Encoding" param is already validated by the binary parsing stage. |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypePointer: |
| case OpenCLDebugInfo100DebugTypeQualifier: { |
| auto validate_base_type = |
| ValidateOperandBaseType(_, inst, 5, ext_inst_name); |
| if (validate_base_type != SPV_SUCCESS) return validate_base_type; |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeVector: { |
| auto validate_base_type = |
| ValidateOperandBaseType(_, inst, 5, ext_inst_name); |
| if (validate_base_type != SPV_SUCCESS) return validate_base_type; |
| |
| uint32_t component_count = inst->word(6); |
| if (!component_count || component_count > 4) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": Component Count must be positive " |
| << "integer less than or equal to 4"; |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeArray: { |
| auto validate_base_type = |
| ValidateOperandDebugType(_, "Base Type", inst, 5, ext_inst_name); |
| if (validate_base_type != SPV_SUCCESS) return validate_base_type; |
| for (uint32_t i = 6; i < num_words; ++i) { |
| CHECK_OPERAND("Component Count", SpvOpConstant, i); |
| auto* component_count = _.FindDef(inst->word(i)); |
| if (!_.IsIntScalarType(component_count->type_id()) || |
| !component_count->word(3)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": Component Count must be positive " |
| << "integer"; |
| } |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypedef: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| auto validate_base_type = |
| ValidateOperandBaseType(_, inst, 6, ext_inst_name); |
| if (validate_base_type != SPV_SUCCESS) return validate_base_type; |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeFunction: { |
| auto* return_type = _.FindDef(inst->word(6)); |
| if (return_type->opcode() != SpvOpTypeVoid) { |
| auto validate_return = ValidateOperandDebugType( |
| _, "Return Type", inst, 6, ext_inst_name); |
| if (validate_return != SPV_SUCCESS) return validate_return; |
| } |
| for (uint32_t word_index = 7; word_index < num_words; ++word_index) { |
| auto validate_param = ValidateOperandDebugType( |
| _, "Parameter Types", inst, word_index, ext_inst_name); |
| if (validate_param != SPV_SUCCESS) return validate_param; |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeEnum: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| if (!DoesDebugInfoOperandMatchExpectation( |
| _, |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == OpenCLDebugInfo100DebugInfoNone; |
| }, |
| inst, 6)) { |
| auto validate_underlying_type = ValidateOperandDebugType( |
| _, "Underlying Types", inst, 6, ext_inst_name); |
| if (validate_underlying_type != SPV_SUCCESS) |
| return validate_underlying_type; |
| } |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| CHECK_OPERAND("Size", SpvOpConstant, 11); |
| auto* size = _.FindDef(inst->word(11)); |
| if (!_.IsIntScalarType(size->type_id()) || !size->word(3)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": expected operand Size is a " |
| << "positive integer"; |
| } |
| for (uint32_t word_index = 13; word_index + 1 < num_words; |
| word_index += 2) { |
| CHECK_OPERAND("Value", SpvOpConstant, word_index); |
| CHECK_OPERAND("Name", SpvOpString, word_index + 1); |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeComposite: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| CHECK_OPERAND("Linkage Name", SpvOpString, 11); |
| if (!DoesDebugInfoOperandMatchExpectation( |
| _, |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == OpenCLDebugInfo100DebugInfoNone; |
| }, |
| inst, 12)) { |
| CHECK_OPERAND("Size", SpvOpConstant, 12); |
| } |
| for (uint32_t word_index = 14; word_index < num_words; ++word_index) { |
| if (!DoesDebugInfoOperandMatchExpectation( |
| _, |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == OpenCLDebugInfo100DebugTypeMember || |
| dbg_inst == OpenCLDebugInfo100DebugFunction || |
| dbg_inst == OpenCLDebugInfo100DebugTypeInheritance; |
| }, |
| inst, word_index)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Members " |
| << "must be DebugTypeMember, DebugFunction, or " |
| "DebugTypeInheritance"; |
| } |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeMember: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| auto validate_type = |
| ValidateOperandDebugType(_, "Type", inst, 6, ext_inst_name); |
| if (validate_type != SPV_SUCCESS) return validate_type; |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| CHECK_DEBUG_OPERAND("Parent", OpenCLDebugInfo100DebugTypeComposite, 10); |
| CHECK_OPERAND("Offset", SpvOpConstant, 11); |
| CHECK_OPERAND("Size", SpvOpConstant, 12); |
| if (num_words == 15) CHECK_OPERAND("Value", SpvOpConstant, 14); |
| break; |
| } |
| case OpenCLDebugInfo100DebugTypeInheritance: { |
| CHECK_DEBUG_OPERAND("Child", OpenCLDebugInfo100DebugTypeComposite, 5); |
| auto* debug_inst = _.FindDef(inst->word(5)); |
| auto composite_type = |
| OpenCLDebugInfo100DebugCompositeType(debug_inst->word(6)); |
| if (composite_type != OpenCLDebugInfo100Class && |
| composite_type != OpenCLDebugInfo100Structure) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Child must be class or struct debug type"; |
| } |
| CHECK_DEBUG_OPERAND("Parent", OpenCLDebugInfo100DebugTypeComposite, 6); |
| debug_inst = _.FindDef(inst->word(6)); |
| composite_type = |
| OpenCLDebugInfo100DebugCompositeType(debug_inst->word(6)); |
| if (composite_type != OpenCLDebugInfo100Class && |
| composite_type != OpenCLDebugInfo100Structure) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Parent must be class or struct debug " |
| "type"; |
| } |
| CHECK_OPERAND("Offset", SpvOpConstant, 7); |
| CHECK_OPERAND("Size", SpvOpConstant, 8); |
| break; |
| } |
| case OpenCLDebugInfo100DebugFunction: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| auto validate_type = |
| ValidateOperandDebugType(_, "Type", inst, 6, ext_inst_name); |
| if (validate_type != SPV_SUCCESS) return validate_type; |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| CHECK_OPERAND("Linkage Name", SpvOpString, 11); |
| // TODO: The current OpenCL.100.DebugInfo spec says "Function |
| // is an OpFunction which is described by this instruction.". |
| // However, the function definition can be opted-out e.g., |
| // inlining. We assume that Function operand can be a |
| // DebugInfoNone, but we must discuss it and update the spec. |
| if (!DoesDebugInfoOperandMatchExpectation( |
| _, |
| [](OpenCLDebugInfo100Instructions dbg_inst) { |
| return dbg_inst == OpenCLDebugInfo100DebugInfoNone; |
| }, |
| inst, 14)) { |
| CHECK_OPERAND("Function", SpvOpFunction, 14); |
| } |
| if (num_words == 16) { |
| CHECK_DEBUG_OPERAND("Declaration", |
| OpenCLDebugInfo100DebugFunctionDeclaration, 15); |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugFunctionDeclaration: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| auto validate_type = |
| ValidateOperandDebugType(_, "Type", inst, 6, ext_inst_name); |
| if (validate_type != SPV_SUCCESS) return validate_type; |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| CHECK_OPERAND("Linkage Name", SpvOpString, 11); |
| break; |
| } |
| case OpenCLDebugInfo100DebugLexicalBlock: { |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 5); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 8, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| if (num_words == 10) CHECK_OPERAND("Name", SpvOpString, 9); |
| break; |
| } |
| case OpenCLDebugInfo100DebugScope: { |
| // TODO(https://gitlab.khronos.org/spirv/SPIR-V/issues/533): We are |
| // still in spec discussion about what must be "Scope" operand of |
| // DebugScope. Update this code if the conclusion is different. |
| auto validate_scope = |
| ValidateOperandLexicalScope(_, "Scope", inst, 5, ext_inst_name); |
| if (validate_scope != SPV_SUCCESS) return validate_scope; |
| if (num_words == 7) { |
| CHECK_DEBUG_OPERAND("Inlined At", OpenCLDebugInfo100DebugInlinedAt, |
| 6); |
| } |
| break; |
| } |
| case OpenCLDebugInfo100DebugLocalVariable: { |
| CHECK_OPERAND("Name", SpvOpString, 5); |
| auto validate_type = |
| ValidateOperandDebugType(_, "Type", inst, 6, ext_inst_name); |
| if (validate_type != SPV_SUCCESS) return validate_type; |
| CHECK_DEBUG_OPERAND("Source", OpenCLDebugInfo100DebugSource, 7); |
| auto validate_parent = |
| ValidateOperandLexicalScope(_, "Parent", inst, 10, ext_inst_name); |
| if (validate_parent != SPV_SUCCESS) return validate_parent; |
| break; |
| } |
| case OpenCLDebugInfo100DebugDeclare: { |
| CHECK_DEBUG_OPERAND("Local Variable", |
| OpenCLDebugInfo100DebugLocalVariable, 5); |
| |
| // TODO: We must discuss DebugDeclare.Variable of OpenCL.100.DebugInfo. |
| // Currently, it says "Variable must be an id of OpVariable instruction |
| // which defines the local variable.", but we want to allow |
| // OpFunctionParameter as well. |
| auto* operand = _.FindDef(inst->word(6)); |
| if (operand->opcode() != SpvOpVariable && |
| operand->opcode() != SpvOpFunctionParameter) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << ext_inst_name() << ": " |
| << "expected operand Variable must be a result id of " |
| "OpVariable or OpFunctionParameter"; |
| } |
| |
| CHECK_DEBUG_OPERAND("Expression", OpenCLDebugInfo100DebugExpression, 7); |
| break; |
| } |
| case OpenCLDebugInfo100DebugExpression: { |
| for (uint32_t word_index = 5; word_index < num_words; ++word_index) { |
| CHECK_DEBUG_OPERAND("Operation", OpenCLDebugInfo100DebugOperation, |
| word_index); |
| } |
| break; |
| } |
| |
| // TODO: Add validation rules for remaining cases as well. |
| case OpenCLDebugInfo100DebugTypePtrToMember: |
| case OpenCLDebugInfo100DebugTypeTemplate: |
| case OpenCLDebugInfo100DebugTypeTemplateParameter: |
| case OpenCLDebugInfo100DebugTypeTemplateTemplateParameter: |
| case OpenCLDebugInfo100DebugTypeTemplateParameterPack: |
| case OpenCLDebugInfo100DebugGlobalVariable: |
| case OpenCLDebugInfo100DebugLexicalBlockDiscriminator: |
| case OpenCLDebugInfo100DebugInlinedAt: |
| case OpenCLDebugInfo100DebugInlinedVariable: |
| case OpenCLDebugInfo100DebugValue: |
| case OpenCLDebugInfo100DebugMacroDef: |
| case OpenCLDebugInfo100DebugMacroUndef: |
| case OpenCLDebugInfo100DebugImportedEntity: |
| break; |
| case OpenCLDebugInfo100InstructionsMax: |
| assert(0); |
| break; |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t ExtensionPass(ValidationState_t& _, const Instruction* inst) { |
| const SpvOp opcode = inst->opcode(); |
| if (opcode == SpvOpExtension) return ValidateExtension(_, inst); |
| if (opcode == SpvOpExtInstImport) return ValidateExtInstImport(_, inst); |
| if (opcode == SpvOpExtInst) return ValidateExtInst(_, inst); |
| |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace val |
| } // namespace spvtools |