| //===- FastISel.cpp - Implementation of the FastISel class ----------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file contains the implementation of the FastISel class. |
| // |
| // "Fast" instruction selection is designed to emit very poor code quickly. |
| // Also, it is not designed to be able to do much lowering, so most illegal |
| // types (e.g. i64 on 32-bit targets) and operations are not supported. It is |
| // also not intended to be able to do much optimization, except in a few cases |
| // where doing optimizations reduces overall compile time. For example, folding |
| // constants into immediate fields is often done, because it's cheap and it |
| // reduces the number of instructions later phases have to examine. |
| // |
| // "Fast" instruction selection is able to fail gracefully and transfer |
| // control to the SelectionDAG selector for operations that it doesn't |
| // support. In many cases, this allows us to avoid duplicating a lot of |
| // the complicated lowering logic that SelectionDAG currently has. |
| // |
| // The intended use for "fast" instruction selection is "-O0" mode |
| // compilation, where the quality of the generated code is irrelevant when |
| // weighed against the speed at which the code can be generated. Also, |
| // at -O0, the LLVM optimizers are not running, and this makes the |
| // compile time of codegen a much higher portion of the overall compile |
| // time. Despite its limitations, "fast" instruction selection is able to |
| // handle enough code on its own to provide noticeable overall speedups |
| // in -O0 compiles. |
| // |
| // Basic operations are supported in a target-independent way, by reading |
| // the same instruction descriptions that the SelectionDAG selector reads, |
| // and identifying simple arithmetic operations that can be directly selected |
| // from simple operators. More complicated operations currently require |
| // target-specific code. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/CodeGen/FastISel.h" |
| #include "llvm/ADT/APFloat.h" |
| #include "llvm/ADT/APSInt.h" |
| #include "llvm/ADT/DenseMap.h" |
| #include "llvm/ADT/Optional.h" |
| #include "llvm/ADT/SmallPtrSet.h" |
| #include "llvm/ADT/SmallString.h" |
| #include "llvm/ADT/SmallVector.h" |
| #include "llvm/ADT/Statistic.h" |
| #include "llvm/Analysis/BranchProbabilityInfo.h" |
| #include "llvm/Analysis/TargetLibraryInfo.h" |
| #include "llvm/CodeGen/Analysis.h" |
| #include "llvm/CodeGen/FunctionLoweringInfo.h" |
| #include "llvm/CodeGen/ISDOpcodes.h" |
| #include "llvm/CodeGen/MachineBasicBlock.h" |
| #include "llvm/CodeGen/MachineFrameInfo.h" |
| #include "llvm/CodeGen/MachineInstr.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/MachineMemOperand.h" |
| #include "llvm/CodeGen/MachineModuleInfo.h" |
| #include "llvm/CodeGen/MachineOperand.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/StackMaps.h" |
| #include "llvm/CodeGen/TargetInstrInfo.h" |
| #include "llvm/CodeGen/TargetLowering.h" |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" |
| #include "llvm/CodeGen/ValueTypes.h" |
| #include "llvm/IR/Argument.h" |
| #include "llvm/IR/Attributes.h" |
| #include "llvm/IR/BasicBlock.h" |
| #include "llvm/IR/CallSite.h" |
| #include "llvm/IR/CallingConv.h" |
| #include "llvm/IR/Constant.h" |
| #include "llvm/IR/Constants.h" |
| #include "llvm/IR/DataLayout.h" |
| #include "llvm/IR/DebugInfo.h" |
| #include "llvm/IR/DebugLoc.h" |
| #include "llvm/IR/DerivedTypes.h" |
| #include "llvm/IR/Function.h" |
| #include "llvm/IR/GetElementPtrTypeIterator.h" |
| #include "llvm/IR/GlobalValue.h" |
| #include "llvm/IR/InlineAsm.h" |
| #include "llvm/IR/InstrTypes.h" |
| #include "llvm/IR/Instruction.h" |
| #include "llvm/IR/Instructions.h" |
| #include "llvm/IR/IntrinsicInst.h" |
| #include "llvm/IR/LLVMContext.h" |
| #include "llvm/IR/Mangler.h" |
| #include "llvm/IR/Metadata.h" |
| #include "llvm/IR/Operator.h" |
| #include "llvm/IR/PatternMatch.h" |
| #include "llvm/IR/Type.h" |
| #include "llvm/IR/User.h" |
| #include "llvm/IR/Value.h" |
| #include "llvm/MC/MCContext.h" |
| #include "llvm/MC/MCInstrDesc.h" |
| #include "llvm/MC/MCRegisterInfo.h" |
| #include "llvm/Support/Casting.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/ErrorHandling.h" |
| #include "llvm/Support/MachineValueType.h" |
| #include "llvm/Support/MathExtras.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include "llvm/Target/TargetMachine.h" |
| #include "llvm/Target/TargetOptions.h" |
| #include <algorithm> |
| #include <cassert> |
| #include <cstdint> |
| #include <iterator> |
| #include <utility> |
| |
| using namespace llvm; |
| using namespace PatternMatch; |
| |
| #define DEBUG_TYPE "isel" |
| |
| // FIXME: Remove this after the feature has proven reliable. |
| static cl::opt<bool> SinkLocalValues("fast-isel-sink-local-values", |
| cl::init(true), cl::Hidden, |
| cl::desc("Sink local values in FastISel")); |
| |
| STATISTIC(NumFastIselSuccessIndependent, "Number of insts selected by " |
| "target-independent selector"); |
| STATISTIC(NumFastIselSuccessTarget, "Number of insts selected by " |
| "target-specific selector"); |
| STATISTIC(NumFastIselDead, "Number of dead insts removed on failure"); |
| |
| /// Set the current block to which generated machine instructions will be |
| /// appended. |
| void FastISel::startNewBlock() { |
| assert(LocalValueMap.empty() && |
| "local values should be cleared after finishing a BB"); |
| |
| // Instructions are appended to FuncInfo.MBB. If the basic block already |
| // contains labels or copies, use the last instruction as the last local |
| // value. |
| EmitStartPt = nullptr; |
| if (!FuncInfo.MBB->empty()) |
| EmitStartPt = &FuncInfo.MBB->back(); |
| LastLocalValue = EmitStartPt; |
| } |
| |
| /// Flush the local CSE map and sink anything we can. |
| void FastISel::finishBasicBlock() { flushLocalValueMap(); } |
| |
| bool FastISel::lowerArguments() { |
| if (!FuncInfo.CanLowerReturn) |
| // Fallback to SDISel argument lowering code to deal with sret pointer |
| // parameter. |
| return false; |
| |
| if (!fastLowerArguments()) |
| return false; |
| |
| // Enter arguments into ValueMap for uses in non-entry BBs. |
| for (Function::const_arg_iterator I = FuncInfo.Fn->arg_begin(), |
| E = FuncInfo.Fn->arg_end(); |
| I != E; ++I) { |
| DenseMap<const Value *, unsigned>::iterator VI = LocalValueMap.find(&*I); |
| assert(VI != LocalValueMap.end() && "Missed an argument?"); |
| FuncInfo.ValueMap[&*I] = VI->second; |
| } |
| return true; |
| } |
| |
| /// Return the defined register if this instruction defines exactly one |
| /// virtual register and uses no other virtual registers. Otherwise return 0. |
| static unsigned findSinkableLocalRegDef(MachineInstr &MI) { |
| unsigned RegDef = 0; |
| for (const MachineOperand &MO : MI.operands()) { |
| if (!MO.isReg()) |
| continue; |
| if (MO.isDef()) { |
| if (RegDef) |
| return 0; |
| RegDef = MO.getReg(); |
| } else if (Register::isVirtualRegister(MO.getReg())) { |
| // This is another use of a vreg. Don't try to sink it. |
| return 0; |
| } |
| } |
| return RegDef; |
| } |
| |
| void FastISel::flushLocalValueMap() { |
| // Try to sink local values down to their first use so that we can give them a |
| // better debug location. This has the side effect of shrinking local value |
| // live ranges, which helps out fast regalloc. |
| if (SinkLocalValues && LastLocalValue != EmitStartPt) { |
| // Sink local value materialization instructions between EmitStartPt and |
| // LastLocalValue. Visit them bottom-up, starting from LastLocalValue, to |
| // avoid inserting into the range that we're iterating over. |
| MachineBasicBlock::reverse_iterator RE = |
| EmitStartPt ? MachineBasicBlock::reverse_iterator(EmitStartPt) |
| : FuncInfo.MBB->rend(); |
| MachineBasicBlock::reverse_iterator RI(LastLocalValue); |
| |
| InstOrderMap OrderMap; |
| for (; RI != RE;) { |
| MachineInstr &LocalMI = *RI; |
| ++RI; |
| bool Store = true; |
| if (!LocalMI.isSafeToMove(nullptr, Store)) |
| continue; |
| unsigned DefReg = findSinkableLocalRegDef(LocalMI); |
| if (DefReg == 0) |
| continue; |
| |
| sinkLocalValueMaterialization(LocalMI, DefReg, OrderMap); |
| } |
| } |
| |
| LocalValueMap.clear(); |
| LastLocalValue = EmitStartPt; |
| recomputeInsertPt(); |
| SavedInsertPt = FuncInfo.InsertPt; |
| LastFlushPoint = FuncInfo.InsertPt; |
| } |
| |
| static bool isRegUsedByPhiNodes(unsigned DefReg, |
| FunctionLoweringInfo &FuncInfo) { |
| for (auto &P : FuncInfo.PHINodesToUpdate) |
| if (P.second == DefReg) |
| return true; |
| return false; |
| } |
| |
| /// Build a map of instruction orders. Return the first terminator and its |
| /// order. Consider EH_LABEL instructions to be terminators as well, since local |
| /// values for phis after invokes must be materialized before the call. |
| void FastISel::InstOrderMap::initialize( |
| MachineBasicBlock *MBB, MachineBasicBlock::iterator LastFlushPoint) { |
| unsigned Order = 0; |
| for (MachineInstr &I : *MBB) { |
| if (!FirstTerminator && |
| (I.isTerminator() || (I.isEHLabel() && &I != &MBB->front()))) { |
| FirstTerminator = &I; |
| FirstTerminatorOrder = Order; |
| } |
| Orders[&I] = Order++; |
| |
| // We don't need to order instructions past the last flush point. |
| if (I.getIterator() == LastFlushPoint) |
| break; |
| } |
| } |
| |
| void FastISel::sinkLocalValueMaterialization(MachineInstr &LocalMI, |
| unsigned DefReg, |
| InstOrderMap &OrderMap) { |
| // If this register is used by a register fixup, MRI will not contain all |
| // the uses until after register fixups, so don't attempt to sink or DCE |
| // this instruction. Register fixups typically come from no-op cast |
| // instructions, which replace the cast instruction vreg with the local |
| // value vreg. |
| if (FuncInfo.RegsWithFixups.count(DefReg)) |
| return; |
| |
| // We can DCE this instruction if there are no uses and it wasn't a |
| // materialized for a successor PHI node. |
| bool UsedByPHI = isRegUsedByPhiNodes(DefReg, FuncInfo); |
| if (!UsedByPHI && MRI.use_nodbg_empty(DefReg)) { |
| if (EmitStartPt == &LocalMI) |
| EmitStartPt = EmitStartPt->getPrevNode(); |
| LLVM_DEBUG(dbgs() << "removing dead local value materialization " |
| << LocalMI); |
| OrderMap.Orders.erase(&LocalMI); |
| LocalMI.eraseFromParent(); |
| return; |
| } |
| |
| // Number the instructions if we haven't yet so we can efficiently find the |
| // earliest use. |
| if (OrderMap.Orders.empty()) |
| OrderMap.initialize(FuncInfo.MBB, LastFlushPoint); |
| |
| // Find the first user in the BB. |
| MachineInstr *FirstUser = nullptr; |
| unsigned FirstOrder = std::numeric_limits<unsigned>::max(); |
| for (MachineInstr &UseInst : MRI.use_nodbg_instructions(DefReg)) { |
| auto I = OrderMap.Orders.find(&UseInst); |
| assert(I != OrderMap.Orders.end() && |
| "local value used by instruction outside local region"); |
| unsigned UseOrder = I->second; |
| if (UseOrder < FirstOrder) { |
| FirstOrder = UseOrder; |
| FirstUser = &UseInst; |
| } |
| } |
| |
| // The insertion point will be the first terminator or the first user, |
| // whichever came first. If there was no terminator, this must be a |
| // fallthrough block and the insertion point is the end of the block. |
| MachineBasicBlock::instr_iterator SinkPos; |
| if (UsedByPHI && OrderMap.FirstTerminatorOrder < FirstOrder) { |
| FirstOrder = OrderMap.FirstTerminatorOrder; |
| SinkPos = OrderMap.FirstTerminator->getIterator(); |
| } else if (FirstUser) { |
| SinkPos = FirstUser->getIterator(); |
| } else { |
| assert(UsedByPHI && "must be users if not used by a phi"); |
| SinkPos = FuncInfo.MBB->instr_end(); |
| } |
| |
| // Collect all DBG_VALUEs before the new insertion position so that we can |
| // sink them. |
| SmallVector<MachineInstr *, 1> DbgValues; |
| for (MachineInstr &DbgVal : MRI.use_instructions(DefReg)) { |
| if (!DbgVal.isDebugValue()) |
| continue; |
| unsigned UseOrder = OrderMap.Orders[&DbgVal]; |
| if (UseOrder < FirstOrder) |
| DbgValues.push_back(&DbgVal); |
| } |
| |
| // Sink LocalMI before SinkPos and assign it the same DebugLoc. |
| LLVM_DEBUG(dbgs() << "sinking local value to first use " << LocalMI); |
| FuncInfo.MBB->remove(&LocalMI); |
| FuncInfo.MBB->insert(SinkPos, &LocalMI); |
| if (SinkPos != FuncInfo.MBB->end()) |
| LocalMI.setDebugLoc(SinkPos->getDebugLoc()); |
| |
| // Sink any debug values that we've collected. |
| for (MachineInstr *DI : DbgValues) { |
| FuncInfo.MBB->remove(DI); |
| FuncInfo.MBB->insert(SinkPos, DI); |
| } |
| } |
| |
| bool FastISel::hasTrivialKill(const Value *V) { |
| // Don't consider constants or arguments to have trivial kills. |
| const Instruction *I = dyn_cast<Instruction>(V); |
| if (!I) |
| return false; |
| |
| // No-op casts are trivially coalesced by fast-isel. |
| if (const auto *Cast = dyn_cast<CastInst>(I)) |
| if (Cast->isNoopCast(DL) && !hasTrivialKill(Cast->getOperand(0))) |
| return false; |
| |
| // Even the value might have only one use in the LLVM IR, it is possible that |
| // FastISel might fold the use into another instruction and now there is more |
| // than one use at the Machine Instruction level. |
| unsigned Reg = lookUpRegForValue(V); |
| if (Reg && !MRI.use_empty(Reg)) |
| return false; |
| |
| // GEPs with all zero indices are trivially coalesced by fast-isel. |
| if (const auto *GEP = dyn_cast<GetElementPtrInst>(I)) |
| if (GEP->hasAllZeroIndices() && !hasTrivialKill(GEP->getOperand(0))) |
| return false; |
| |
| // Only instructions with a single use in the same basic block are considered |
| // to have trivial kills. |
| return I->hasOneUse() && |
| !(I->getOpcode() == Instruction::BitCast || |
| I->getOpcode() == Instruction::PtrToInt || |
| I->getOpcode() == Instruction::IntToPtr) && |
| cast<Instruction>(*I->user_begin())->getParent() == I->getParent(); |
| } |
| |
| unsigned FastISel::getRegForValue(const Value *V) { |
| EVT RealVT = TLI.getValueType(DL, V->getType(), /*AllowUnknown=*/true); |
| // Don't handle non-simple values in FastISel. |
| if (!RealVT.isSimple()) |
| return 0; |
| |
| // Ignore illegal types. We must do this before looking up the value |
| // in ValueMap because Arguments are given virtual registers regardless |
| // of whether FastISel can handle them. |
| MVT VT = RealVT.getSimpleVT(); |
| if (!TLI.isTypeLegal(VT)) { |
| // Handle integer promotions, though, because they're common and easy. |
| if (VT == MVT::i1 || VT == MVT::i8 || VT == MVT::i16) |
| VT = TLI.getTypeToTransformTo(V->getContext(), VT).getSimpleVT(); |
| else |
| return 0; |
| } |
| |
| // Look up the value to see if we already have a register for it. |
| unsigned Reg = lookUpRegForValue(V); |
| if (Reg) |
| return Reg; |
| |
| // In bottom-up mode, just create the virtual register which will be used |
| // to hold the value. It will be materialized later. |
| if (isa<Instruction>(V) && |
| (!isa<AllocaInst>(V) || |
| !FuncInfo.StaticAllocaMap.count(cast<AllocaInst>(V)))) |
| return FuncInfo.InitializeRegForValue(V); |
| |
| SavePoint SaveInsertPt = enterLocalValueArea(); |
| |
| // Materialize the value in a register. Emit any instructions in the |
| // local value area. |
| Reg = materializeRegForValue(V, VT); |
| |
| leaveLocalValueArea(SaveInsertPt); |
| |
| return Reg; |
| } |
| |
| unsigned FastISel::materializeConstant(const Value *V, MVT VT) { |
| unsigned Reg = 0; |
| if (const auto *CI = dyn_cast<ConstantInt>(V)) { |
| if (CI->getValue().getActiveBits() <= 64) |
| Reg = fastEmit_i(VT, VT, ISD::Constant, CI->getZExtValue()); |
| } else if (isa<AllocaInst>(V)) |
| Reg = fastMaterializeAlloca(cast<AllocaInst>(V)); |
| else if (isa<ConstantPointerNull>(V)) |
| // Translate this as an integer zero so that it can be |
| // local-CSE'd with actual integer zeros. |
| Reg = |
| getRegForValue(Constant::getNullValue(DL.getIntPtrType(V->getType()))); |
| else if (const auto *CF = dyn_cast<ConstantFP>(V)) { |
| if (CF->isNullValue()) |
| Reg = fastMaterializeFloatZero(CF); |
| else |
| // Try to emit the constant directly. |
| Reg = fastEmit_f(VT, VT, ISD::ConstantFP, CF); |
| |
| if (!Reg) { |
| // Try to emit the constant by using an integer constant with a cast. |
| const APFloat &Flt = CF->getValueAPF(); |
| EVT IntVT = TLI.getPointerTy(DL); |
| uint32_t IntBitWidth = IntVT.getSizeInBits(); |
| APSInt SIntVal(IntBitWidth, /*isUnsigned=*/false); |
| bool isExact; |
| (void)Flt.convertToInteger(SIntVal, APFloat::rmTowardZero, &isExact); |
| if (isExact) { |
| unsigned IntegerReg = |
| getRegForValue(ConstantInt::get(V->getContext(), SIntVal)); |
| if (IntegerReg != 0) |
| Reg = fastEmit_r(IntVT.getSimpleVT(), VT, ISD::SINT_TO_FP, IntegerReg, |
| /*Kill=*/false); |
| } |
| } |
| } else if (const auto *Op = dyn_cast<Operator>(V)) { |
| if (!selectOperator(Op, Op->getOpcode())) |
| if (!isa<Instruction>(Op) || |
| !fastSelectInstruction(cast<Instruction>(Op))) |
| return 0; |
| Reg = lookUpRegForValue(Op); |
| } else if (isa<UndefValue>(V)) { |
| Reg = createResultReg(TLI.getRegClassFor(VT)); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::IMPLICIT_DEF), Reg); |
| } |
| return Reg; |
| } |
| |
| /// Helper for getRegForValue. This function is called when the value isn't |
| /// already available in a register and must be materialized with new |
| /// instructions. |
| unsigned FastISel::materializeRegForValue(const Value *V, MVT VT) { |
| unsigned Reg = 0; |
| // Give the target-specific code a try first. |
| if (isa<Constant>(V)) |
| Reg = fastMaterializeConstant(cast<Constant>(V)); |
| |
| // If target-specific code couldn't or didn't want to handle the value, then |
| // give target-independent code a try. |
| if (!Reg) |
| Reg = materializeConstant(V, VT); |
| |
| // Don't cache constant materializations in the general ValueMap. |
| // To do so would require tracking what uses they dominate. |
| if (Reg) { |
| LocalValueMap[V] = Reg; |
| LastLocalValue = MRI.getVRegDef(Reg); |
| } |
| return Reg; |
| } |
| |
| unsigned FastISel::lookUpRegForValue(const Value *V) { |
| // Look up the value to see if we already have a register for it. We |
| // cache values defined by Instructions across blocks, and other values |
| // only locally. This is because Instructions already have the SSA |
| // def-dominates-use requirement enforced. |
| DenseMap<const Value *, unsigned>::iterator I = FuncInfo.ValueMap.find(V); |
| if (I != FuncInfo.ValueMap.end()) |
| return I->second; |
| return LocalValueMap[V]; |
| } |
| |
| void FastISel::updateValueMap(const Value *I, unsigned Reg, unsigned NumRegs) { |
| if (!isa<Instruction>(I)) { |
| LocalValueMap[I] = Reg; |
| return; |
| } |
| |
| unsigned &AssignedReg = FuncInfo.ValueMap[I]; |
| if (AssignedReg == 0) |
| // Use the new register. |
| AssignedReg = Reg; |
| else if (Reg != AssignedReg) { |
| // Arrange for uses of AssignedReg to be replaced by uses of Reg. |
| for (unsigned i = 0; i < NumRegs; i++) { |
| FuncInfo.RegFixups[AssignedReg + i] = Reg + i; |
| FuncInfo.RegsWithFixups.insert(Reg + i); |
| } |
| |
| AssignedReg = Reg; |
| } |
| } |
| |
| std::pair<unsigned, bool> FastISel::getRegForGEPIndex(const Value *Idx) { |
| unsigned IdxN = getRegForValue(Idx); |
| if (IdxN == 0) |
| // Unhandled operand. Halt "fast" selection and bail. |
| return std::pair<unsigned, bool>(0, false); |
| |
| bool IdxNIsKill = hasTrivialKill(Idx); |
| |
| // If the index is smaller or larger than intptr_t, truncate or extend it. |
| MVT PtrVT = TLI.getPointerTy(DL); |
| EVT IdxVT = EVT::getEVT(Idx->getType(), /*HandleUnknown=*/false); |
| if (IdxVT.bitsLT(PtrVT)) { |
| IdxN = fastEmit_r(IdxVT.getSimpleVT(), PtrVT, ISD::SIGN_EXTEND, IdxN, |
| IdxNIsKill); |
| IdxNIsKill = true; |
| } else if (IdxVT.bitsGT(PtrVT)) { |
| IdxN = |
| fastEmit_r(IdxVT.getSimpleVT(), PtrVT, ISD::TRUNCATE, IdxN, IdxNIsKill); |
| IdxNIsKill = true; |
| } |
| return std::pair<unsigned, bool>(IdxN, IdxNIsKill); |
| } |
| |
| void FastISel::recomputeInsertPt() { |
| if (getLastLocalValue()) { |
| FuncInfo.InsertPt = getLastLocalValue(); |
| FuncInfo.MBB = FuncInfo.InsertPt->getParent(); |
| ++FuncInfo.InsertPt; |
| } else |
| FuncInfo.InsertPt = FuncInfo.MBB->getFirstNonPHI(); |
| |
| // Now skip past any EH_LABELs, which must remain at the beginning. |
| while (FuncInfo.InsertPt != FuncInfo.MBB->end() && |
| FuncInfo.InsertPt->getOpcode() == TargetOpcode::EH_LABEL) |
| ++FuncInfo.InsertPt; |
| } |
| |
| void FastISel::removeDeadCode(MachineBasicBlock::iterator I, |
| MachineBasicBlock::iterator E) { |
| assert(I.isValid() && E.isValid() && std::distance(I, E) > 0 && |
| "Invalid iterator!"); |
| while (I != E) { |
| if (LastFlushPoint == I) |
| LastFlushPoint = E; |
| if (SavedInsertPt == I) |
| SavedInsertPt = E; |
| if (EmitStartPt == I) |
| EmitStartPt = E.isValid() ? &*E : nullptr; |
| if (LastLocalValue == I) |
| LastLocalValue = E.isValid() ? &*E : nullptr; |
| |
| MachineInstr *Dead = &*I; |
| ++I; |
| Dead->eraseFromParent(); |
| ++NumFastIselDead; |
| } |
| recomputeInsertPt(); |
| } |
| |
| FastISel::SavePoint FastISel::enterLocalValueArea() { |
| MachineBasicBlock::iterator OldInsertPt = FuncInfo.InsertPt; |
| DebugLoc OldDL = DbgLoc; |
| recomputeInsertPt(); |
| DbgLoc = DebugLoc(); |
| SavePoint SP = {OldInsertPt, OldDL}; |
| return SP; |
| } |
| |
| void FastISel::leaveLocalValueArea(SavePoint OldInsertPt) { |
| if (FuncInfo.InsertPt != FuncInfo.MBB->begin()) |
| LastLocalValue = &*std::prev(FuncInfo.InsertPt); |
| |
| // Restore the previous insert position. |
| FuncInfo.InsertPt = OldInsertPt.InsertPt; |
| DbgLoc = OldInsertPt.DL; |
| } |
| |
| bool FastISel::selectBinaryOp(const User *I, unsigned ISDOpcode) { |
| EVT VT = EVT::getEVT(I->getType(), /*HandleUnknown=*/true); |
| if (VT == MVT::Other || !VT.isSimple()) |
| // Unhandled type. Halt "fast" selection and bail. |
| return false; |
| |
| // We only handle legal types. For example, on x86-32 the instruction |
| // selector contains all of the 64-bit instructions from x86-64, |
| // under the assumption that i64 won't be used if the target doesn't |
| // support it. |
| if (!TLI.isTypeLegal(VT)) { |
| // MVT::i1 is special. Allow AND, OR, or XOR because they |
| // don't require additional zeroing, which makes them easy. |
| if (VT == MVT::i1 && (ISDOpcode == ISD::AND || ISDOpcode == ISD::OR || |
| ISDOpcode == ISD::XOR)) |
| VT = TLI.getTypeToTransformTo(I->getContext(), VT); |
| else |
| return false; |
| } |
| |
| // Check if the first operand is a constant, and handle it as "ri". At -O0, |
| // we don't have anything that canonicalizes operand order. |
| if (const auto *CI = dyn_cast<ConstantInt>(I->getOperand(0))) |
| if (isa<Instruction>(I) && cast<Instruction>(I)->isCommutative()) { |
| unsigned Op1 = getRegForValue(I->getOperand(1)); |
| if (!Op1) |
| return false; |
| bool Op1IsKill = hasTrivialKill(I->getOperand(1)); |
| |
| unsigned ResultReg = |
| fastEmit_ri_(VT.getSimpleVT(), ISDOpcode, Op1, Op1IsKill, |
| CI->getZExtValue(), VT.getSimpleVT()); |
| if (!ResultReg) |
| return false; |
| |
| // We successfully emitted code for the given LLVM Instruction. |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| unsigned Op0 = getRegForValue(I->getOperand(0)); |
| if (!Op0) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| bool Op0IsKill = hasTrivialKill(I->getOperand(0)); |
| |
| // Check if the second operand is a constant and handle it appropriately. |
| if (const auto *CI = dyn_cast<ConstantInt>(I->getOperand(1))) { |
| uint64_t Imm = CI->getSExtValue(); |
| |
| // Transform "sdiv exact X, 8" -> "sra X, 3". |
| if (ISDOpcode == ISD::SDIV && isa<BinaryOperator>(I) && |
| cast<BinaryOperator>(I)->isExact() && isPowerOf2_64(Imm)) { |
| Imm = Log2_64(Imm); |
| ISDOpcode = ISD::SRA; |
| } |
| |
| // Transform "urem x, pow2" -> "and x, pow2-1". |
| if (ISDOpcode == ISD::UREM && isa<BinaryOperator>(I) && |
| isPowerOf2_64(Imm)) { |
| --Imm; |
| ISDOpcode = ISD::AND; |
| } |
| |
| unsigned ResultReg = fastEmit_ri_(VT.getSimpleVT(), ISDOpcode, Op0, |
| Op0IsKill, Imm, VT.getSimpleVT()); |
| if (!ResultReg) |
| return false; |
| |
| // We successfully emitted code for the given LLVM Instruction. |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| unsigned Op1 = getRegForValue(I->getOperand(1)); |
| if (!Op1) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| bool Op1IsKill = hasTrivialKill(I->getOperand(1)); |
| |
| // Now we have both operands in registers. Emit the instruction. |
| unsigned ResultReg = fastEmit_rr(VT.getSimpleVT(), VT.getSimpleVT(), |
| ISDOpcode, Op0, Op0IsKill, Op1, Op1IsKill); |
| if (!ResultReg) |
| // Target-specific code wasn't able to find a machine opcode for |
| // the given ISD opcode and type. Halt "fast" selection and bail. |
| return false; |
| |
| // We successfully emitted code for the given LLVM Instruction. |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| bool FastISel::selectGetElementPtr(const User *I) { |
| unsigned N = getRegForValue(I->getOperand(0)); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| bool NIsKill = hasTrivialKill(I->getOperand(0)); |
| |
| // Keep a running tab of the total offset to coalesce multiple N = N + Offset |
| // into a single N = N + TotalOffset. |
| uint64_t TotalOffs = 0; |
| // FIXME: What's a good SWAG number for MaxOffs? |
| uint64_t MaxOffs = 2048; |
| MVT VT = TLI.getPointerTy(DL); |
| for (gep_type_iterator GTI = gep_type_begin(I), E = gep_type_end(I); |
| GTI != E; ++GTI) { |
| const Value *Idx = GTI.getOperand(); |
| if (StructType *StTy = GTI.getStructTypeOrNull()) { |
| uint64_t Field = cast<ConstantInt>(Idx)->getZExtValue(); |
| if (Field) { |
| // N = N + Offset |
| TotalOffs += DL.getStructLayout(StTy)->getElementOffset(Field); |
| if (TotalOffs >= MaxOffs) { |
| N = fastEmit_ri_(VT, ISD::ADD, N, NIsKill, TotalOffs, VT); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| NIsKill = true; |
| TotalOffs = 0; |
| } |
| } |
| } else { |
| Type *Ty = GTI.getIndexedType(); |
| |
| // If this is a constant subscript, handle it quickly. |
| if (const auto *CI = dyn_cast<ConstantInt>(Idx)) { |
| if (CI->isZero()) |
| continue; |
| // N = N + Offset |
| uint64_t IdxN = CI->getValue().sextOrTrunc(64).getSExtValue(); |
| TotalOffs += DL.getTypeAllocSize(Ty) * IdxN; |
| if (TotalOffs >= MaxOffs) { |
| N = fastEmit_ri_(VT, ISD::ADD, N, NIsKill, TotalOffs, VT); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| NIsKill = true; |
| TotalOffs = 0; |
| } |
| continue; |
| } |
| if (TotalOffs) { |
| N = fastEmit_ri_(VT, ISD::ADD, N, NIsKill, TotalOffs, VT); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| NIsKill = true; |
| TotalOffs = 0; |
| } |
| |
| // N = N + Idx * ElementSize; |
| uint64_t ElementSize = DL.getTypeAllocSize(Ty); |
| std::pair<unsigned, bool> Pair = getRegForGEPIndex(Idx); |
| unsigned IdxN = Pair.first; |
| bool IdxNIsKill = Pair.second; |
| if (!IdxN) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| |
| if (ElementSize != 1) { |
| IdxN = fastEmit_ri_(VT, ISD::MUL, IdxN, IdxNIsKill, ElementSize, VT); |
| if (!IdxN) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| IdxNIsKill = true; |
| } |
| N = fastEmit_rr(VT, VT, ISD::ADD, N, NIsKill, IdxN, IdxNIsKill); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| } |
| } |
| if (TotalOffs) { |
| N = fastEmit_ri_(VT, ISD::ADD, N, NIsKill, TotalOffs, VT); |
| if (!N) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| } |
| |
| // We successfully emitted code for the given LLVM Instruction. |
| updateValueMap(I, N); |
| return true; |
| } |
| |
| bool FastISel::addStackMapLiveVars(SmallVectorImpl<MachineOperand> &Ops, |
| const CallInst *CI, unsigned StartIdx) { |
| for (unsigned i = StartIdx, e = CI->getNumArgOperands(); i != e; ++i) { |
| Value *Val = CI->getArgOperand(i); |
| // Check for constants and encode them with a StackMaps::ConstantOp prefix. |
| if (const auto *C = dyn_cast<ConstantInt>(Val)) { |
| Ops.push_back(MachineOperand::CreateImm(StackMaps::ConstantOp)); |
| Ops.push_back(MachineOperand::CreateImm(C->getSExtValue())); |
| } else if (isa<ConstantPointerNull>(Val)) { |
| Ops.push_back(MachineOperand::CreateImm(StackMaps::ConstantOp)); |
| Ops.push_back(MachineOperand::CreateImm(0)); |
| } else if (auto *AI = dyn_cast<AllocaInst>(Val)) { |
| // Values coming from a stack location also require a special encoding, |
| // but that is added later on by the target specific frame index |
| // elimination implementation. |
| auto SI = FuncInfo.StaticAllocaMap.find(AI); |
| if (SI != FuncInfo.StaticAllocaMap.end()) |
| Ops.push_back(MachineOperand::CreateFI(SI->second)); |
| else |
| return false; |
| } else { |
| unsigned Reg = getRegForValue(Val); |
| if (!Reg) |
| return false; |
| Ops.push_back(MachineOperand::CreateReg(Reg, /*isDef=*/false)); |
| } |
| } |
| return true; |
| } |
| |
| bool FastISel::selectStackmap(const CallInst *I) { |
| // void @llvm.experimental.stackmap(i64 <id>, i32 <numShadowBytes>, |
| // [live variables...]) |
| assert(I->getCalledFunction()->getReturnType()->isVoidTy() && |
| "Stackmap cannot return a value."); |
| |
| // The stackmap intrinsic only records the live variables (the arguments |
| // passed to it) and emits NOPS (if requested). Unlike the patchpoint |
| // intrinsic, this won't be lowered to a function call. This means we don't |
| // have to worry about calling conventions and target-specific lowering code. |
| // Instead we perform the call lowering right here. |
| // |
| // CALLSEQ_START(0, 0...) |
| // STACKMAP(id, nbytes, ...) |
| // CALLSEQ_END(0, 0) |
| // |
| SmallVector<MachineOperand, 32> Ops; |
| |
| // Add the <id> and <numBytes> constants. |
| assert(isa<ConstantInt>(I->getOperand(PatchPointOpers::IDPos)) && |
| "Expected a constant integer."); |
| const auto *ID = cast<ConstantInt>(I->getOperand(PatchPointOpers::IDPos)); |
| Ops.push_back(MachineOperand::CreateImm(ID->getZExtValue())); |
| |
| assert(isa<ConstantInt>(I->getOperand(PatchPointOpers::NBytesPos)) && |
| "Expected a constant integer."); |
| const auto *NumBytes = |
| cast<ConstantInt>(I->getOperand(PatchPointOpers::NBytesPos)); |
| Ops.push_back(MachineOperand::CreateImm(NumBytes->getZExtValue())); |
| |
| // Push live variables for the stack map (skipping the first two arguments |
| // <id> and <numBytes>). |
| if (!addStackMapLiveVars(Ops, I, 2)) |
| return false; |
| |
| // We are not adding any register mask info here, because the stackmap doesn't |
| // clobber anything. |
| |
| // Add scratch registers as implicit def and early clobber. |
| CallingConv::ID CC = I->getCallingConv(); |
| const MCPhysReg *ScratchRegs = TLI.getScratchRegisters(CC); |
| for (unsigned i = 0; ScratchRegs[i]; ++i) |
| Ops.push_back(MachineOperand::CreateReg( |
| ScratchRegs[i], /*isDef=*/true, /*isImp=*/true, /*isKill=*/false, |
| /*isDead=*/false, /*isUndef=*/false, /*isEarlyClobber=*/true)); |
| |
| // Issue CALLSEQ_START |
| unsigned AdjStackDown = TII.getCallFrameSetupOpcode(); |
| auto Builder = |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, TII.get(AdjStackDown)); |
| const MCInstrDesc &MCID = Builder.getInstr()->getDesc(); |
| for (unsigned I = 0, E = MCID.getNumOperands(); I < E; ++I) |
| Builder.addImm(0); |
| |
| // Issue STACKMAP. |
| MachineInstrBuilder MIB = BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::STACKMAP)); |
| for (auto const &MO : Ops) |
| MIB.add(MO); |
| |
| // Issue CALLSEQ_END |
| unsigned AdjStackUp = TII.getCallFrameDestroyOpcode(); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, TII.get(AdjStackUp)) |
| .addImm(0) |
| .addImm(0); |
| |
| // Inform the Frame Information that we have a stackmap in this function. |
| FuncInfo.MF->getFrameInfo().setHasStackMap(); |
| |
| return true; |
| } |
| |
| /// Lower an argument list according to the target calling convention. |
| /// |
| /// This is a helper for lowering intrinsics that follow a target calling |
| /// convention or require stack pointer adjustment. Only a subset of the |
| /// intrinsic's operands need to participate in the calling convention. |
| bool FastISel::lowerCallOperands(const CallInst *CI, unsigned ArgIdx, |
| unsigned NumArgs, const Value *Callee, |
| bool ForceRetVoidTy, CallLoweringInfo &CLI) { |
| ArgListTy Args; |
| Args.reserve(NumArgs); |
| |
| // Populate the argument list. |
| ImmutableCallSite CS(CI); |
| for (unsigned ArgI = ArgIdx, ArgE = ArgIdx + NumArgs; ArgI != ArgE; ++ArgI) { |
| Value *V = CI->getOperand(ArgI); |
| |
| assert(!V->getType()->isEmptyTy() && "Empty type passed to intrinsic."); |
| |
| ArgListEntry Entry; |
| Entry.Val = V; |
| Entry.Ty = V->getType(); |
| Entry.setAttributes(&CS, ArgI); |
| Args.push_back(Entry); |
| } |
| |
| Type *RetTy = ForceRetVoidTy ? Type::getVoidTy(CI->getType()->getContext()) |
| : CI->getType(); |
| CLI.setCallee(CI->getCallingConv(), RetTy, Callee, std::move(Args), NumArgs); |
| |
| return lowerCallTo(CLI); |
| } |
| |
| FastISel::CallLoweringInfo &FastISel::CallLoweringInfo::setCallee( |
| const DataLayout &DL, MCContext &Ctx, CallingConv::ID CC, Type *ResultTy, |
| StringRef Target, ArgListTy &&ArgsList, unsigned FixedArgs) { |
| SmallString<32> MangledName; |
| Mangler::getNameWithPrefix(MangledName, Target, DL); |
| MCSymbol *Sym = Ctx.getOrCreateSymbol(MangledName); |
| return setCallee(CC, ResultTy, Sym, std::move(ArgsList), FixedArgs); |
| } |
| |
| bool FastISel::selectPatchpoint(const CallInst *I) { |
| // void|i64 @llvm.experimental.patchpoint.void|i64(i64 <id>, |
| // i32 <numBytes>, |
| // i8* <target>, |
| // i32 <numArgs>, |
| // [Args...], |
| // [live variables...]) |
| CallingConv::ID CC = I->getCallingConv(); |
| bool IsAnyRegCC = CC == CallingConv::AnyReg; |
| bool HasDef = !I->getType()->isVoidTy(); |
| Value *Callee = I->getOperand(PatchPointOpers::TargetPos)->stripPointerCasts(); |
| |
| // Get the real number of arguments participating in the call <numArgs> |
| assert(isa<ConstantInt>(I->getOperand(PatchPointOpers::NArgPos)) && |
| "Expected a constant integer."); |
| const auto *NumArgsVal = |
| cast<ConstantInt>(I->getOperand(PatchPointOpers::NArgPos)); |
| unsigned NumArgs = NumArgsVal->getZExtValue(); |
| |
| // Skip the four meta args: <id>, <numNopBytes>, <target>, <numArgs> |
| // This includes all meta-operands up to but not including CC. |
| unsigned NumMetaOpers = PatchPointOpers::CCPos; |
| assert(I->getNumArgOperands() >= NumMetaOpers + NumArgs && |
| "Not enough arguments provided to the patchpoint intrinsic"); |
| |
| // For AnyRegCC the arguments are lowered later on manually. |
| unsigned NumCallArgs = IsAnyRegCC ? 0 : NumArgs; |
| CallLoweringInfo CLI; |
| CLI.setIsPatchPoint(); |
| if (!lowerCallOperands(I, NumMetaOpers, NumCallArgs, Callee, IsAnyRegCC, CLI)) |
| return false; |
| |
| assert(CLI.Call && "No call instruction specified."); |
| |
| SmallVector<MachineOperand, 32> Ops; |
| |
| // Add an explicit result reg if we use the anyreg calling convention. |
| if (IsAnyRegCC && HasDef) { |
| assert(CLI.NumResultRegs == 0 && "Unexpected result register."); |
| CLI.ResultReg = createResultReg(TLI.getRegClassFor(MVT::i64)); |
| CLI.NumResultRegs = 1; |
| Ops.push_back(MachineOperand::CreateReg(CLI.ResultReg, /*isDef=*/true)); |
| } |
| |
| // Add the <id> and <numBytes> constants. |
| assert(isa<ConstantInt>(I->getOperand(PatchPointOpers::IDPos)) && |
| "Expected a constant integer."); |
| const auto *ID = cast<ConstantInt>(I->getOperand(PatchPointOpers::IDPos)); |
| Ops.push_back(MachineOperand::CreateImm(ID->getZExtValue())); |
| |
| assert(isa<ConstantInt>(I->getOperand(PatchPointOpers::NBytesPos)) && |
| "Expected a constant integer."); |
| const auto *NumBytes = |
| cast<ConstantInt>(I->getOperand(PatchPointOpers::NBytesPos)); |
| Ops.push_back(MachineOperand::CreateImm(NumBytes->getZExtValue())); |
| |
| // Add the call target. |
| if (const auto *C = dyn_cast<IntToPtrInst>(Callee)) { |
| uint64_t CalleeConstAddr = |
| cast<ConstantInt>(C->getOperand(0))->getZExtValue(); |
| Ops.push_back(MachineOperand::CreateImm(CalleeConstAddr)); |
| } else if (const auto *C = dyn_cast<ConstantExpr>(Callee)) { |
| if (C->getOpcode() == Instruction::IntToPtr) { |
| uint64_t CalleeConstAddr = |
| cast<ConstantInt>(C->getOperand(0))->getZExtValue(); |
| Ops.push_back(MachineOperand::CreateImm(CalleeConstAddr)); |
| } else |
| llvm_unreachable("Unsupported ConstantExpr."); |
| } else if (const auto *GV = dyn_cast<GlobalValue>(Callee)) { |
| Ops.push_back(MachineOperand::CreateGA(GV, 0)); |
| } else if (isa<ConstantPointerNull>(Callee)) |
| Ops.push_back(MachineOperand::CreateImm(0)); |
| else |
| llvm_unreachable("Unsupported callee address."); |
| |
| // Adjust <numArgs> to account for any arguments that have been passed on |
| // the stack instead. |
| unsigned NumCallRegArgs = IsAnyRegCC ? NumArgs : CLI.OutRegs.size(); |
| Ops.push_back(MachineOperand::CreateImm(NumCallRegArgs)); |
| |
| // Add the calling convention |
| Ops.push_back(MachineOperand::CreateImm((unsigned)CC)); |
| |
| // Add the arguments we omitted previously. The register allocator should |
| // place these in any free register. |
| if (IsAnyRegCC) { |
| for (unsigned i = NumMetaOpers, e = NumMetaOpers + NumArgs; i != e; ++i) { |
| unsigned Reg = getRegForValue(I->getArgOperand(i)); |
| if (!Reg) |
| return false; |
| Ops.push_back(MachineOperand::CreateReg(Reg, /*isDef=*/false)); |
| } |
| } |
| |
| // Push the arguments from the call instruction. |
| for (auto Reg : CLI.OutRegs) |
| Ops.push_back(MachineOperand::CreateReg(Reg, /*isDef=*/false)); |
| |
| // Push live variables for the stack map. |
| if (!addStackMapLiveVars(Ops, I, NumMetaOpers + NumArgs)) |
| return false; |
| |
| // Push the register mask info. |
| Ops.push_back(MachineOperand::CreateRegMask( |
| TRI.getCallPreservedMask(*FuncInfo.MF, CC))); |
| |
| // Add scratch registers as implicit def and early clobber. |
| const MCPhysReg *ScratchRegs = TLI.getScratchRegisters(CC); |
| for (unsigned i = 0; ScratchRegs[i]; ++i) |
| Ops.push_back(MachineOperand::CreateReg( |
| ScratchRegs[i], /*isDef=*/true, /*isImp=*/true, /*isKill=*/false, |
| /*isDead=*/false, /*isUndef=*/false, /*isEarlyClobber=*/true)); |
| |
| // Add implicit defs (return values). |
| for (auto Reg : CLI.InRegs) |
| Ops.push_back(MachineOperand::CreateReg(Reg, /*isDef=*/true, |
| /*isImp=*/true)); |
| |
| // Insert the patchpoint instruction before the call generated by the target. |
| MachineInstrBuilder MIB = BuildMI(*FuncInfo.MBB, CLI.Call, DbgLoc, |
| TII.get(TargetOpcode::PATCHPOINT)); |
| |
| for (auto &MO : Ops) |
| MIB.add(MO); |
| |
| MIB->setPhysRegsDeadExcept(CLI.InRegs, TRI); |
| |
| // Delete the original call instruction. |
| CLI.Call->eraseFromParent(); |
| |
| // Inform the Frame Information that we have a patchpoint in this function. |
| FuncInfo.MF->getFrameInfo().setHasPatchPoint(); |
| |
| if (CLI.NumResultRegs) |
| updateValueMap(I, CLI.ResultReg, CLI.NumResultRegs); |
| return true; |
| } |
| |
| bool FastISel::selectXRayCustomEvent(const CallInst *I) { |
| const auto &Triple = TM.getTargetTriple(); |
| if (Triple.getArch() != Triple::x86_64 || !Triple.isOSLinux()) |
| return true; // don't do anything to this instruction. |
| SmallVector<MachineOperand, 8> Ops; |
| Ops.push_back(MachineOperand::CreateReg(getRegForValue(I->getArgOperand(0)), |
| /*isDef=*/false)); |
| Ops.push_back(MachineOperand::CreateReg(getRegForValue(I->getArgOperand(1)), |
| /*isDef=*/false)); |
| MachineInstrBuilder MIB = |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::PATCHABLE_EVENT_CALL)); |
| for (auto &MO : Ops) |
| MIB.add(MO); |
| |
| // Insert the Patchable Event Call instruction, that gets lowered properly. |
| return true; |
| } |
| |
| bool FastISel::selectXRayTypedEvent(const CallInst *I) { |
| const auto &Triple = TM.getTargetTriple(); |
| if (Triple.getArch() != Triple::x86_64 || !Triple.isOSLinux()) |
| return true; // don't do anything to this instruction. |
| SmallVector<MachineOperand, 8> Ops; |
| Ops.push_back(MachineOperand::CreateReg(getRegForValue(I->getArgOperand(0)), |
| /*isDef=*/false)); |
| Ops.push_back(MachineOperand::CreateReg(getRegForValue(I->getArgOperand(1)), |
| /*isDef=*/false)); |
| Ops.push_back(MachineOperand::CreateReg(getRegForValue(I->getArgOperand(2)), |
| /*isDef=*/false)); |
| MachineInstrBuilder MIB = |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::PATCHABLE_TYPED_EVENT_CALL)); |
| for (auto &MO : Ops) |
| MIB.add(MO); |
| |
| // Insert the Patchable Typed Event Call instruction, that gets lowered properly. |
| return true; |
| } |
| |
| /// Returns an AttributeList representing the attributes applied to the return |
| /// value of the given call. |
| static AttributeList getReturnAttrs(FastISel::CallLoweringInfo &CLI) { |
| SmallVector<Attribute::AttrKind, 2> Attrs; |
| if (CLI.RetSExt) |
| Attrs.push_back(Attribute::SExt); |
| if (CLI.RetZExt) |
| Attrs.push_back(Attribute::ZExt); |
| if (CLI.IsInReg) |
| Attrs.push_back(Attribute::InReg); |
| |
| return AttributeList::get(CLI.RetTy->getContext(), AttributeList::ReturnIndex, |
| Attrs); |
| } |
| |
| bool FastISel::lowerCallTo(const CallInst *CI, const char *SymName, |
| unsigned NumArgs) { |
| MCContext &Ctx = MF->getContext(); |
| SmallString<32> MangledName; |
| Mangler::getNameWithPrefix(MangledName, SymName, DL); |
| MCSymbol *Sym = Ctx.getOrCreateSymbol(MangledName); |
| return lowerCallTo(CI, Sym, NumArgs); |
| } |
| |
| bool FastISel::lowerCallTo(const CallInst *CI, MCSymbol *Symbol, |
| unsigned NumArgs) { |
| ImmutableCallSite CS(CI); |
| |
| FunctionType *FTy = CS.getFunctionType(); |
| Type *RetTy = CS.getType(); |
| |
| ArgListTy Args; |
| Args.reserve(NumArgs); |
| |
| // Populate the argument list. |
| // Attributes for args start at offset 1, after the return attribute. |
| for (unsigned ArgI = 0; ArgI != NumArgs; ++ArgI) { |
| Value *V = CI->getOperand(ArgI); |
| |
| assert(!V->getType()->isEmptyTy() && "Empty type passed to intrinsic."); |
| |
| ArgListEntry Entry; |
| Entry.Val = V; |
| Entry.Ty = V->getType(); |
| Entry.setAttributes(&CS, ArgI); |
| Args.push_back(Entry); |
| } |
| TLI.markLibCallAttributes(MF, CS.getCallingConv(), Args); |
| |
| CallLoweringInfo CLI; |
| CLI.setCallee(RetTy, FTy, Symbol, std::move(Args), CS, NumArgs); |
| |
| return lowerCallTo(CLI); |
| } |
| |
| bool FastISel::lowerCallTo(CallLoweringInfo &CLI) { |
| // Handle the incoming return values from the call. |
| CLI.clearIns(); |
| SmallVector<EVT, 4> RetTys; |
| ComputeValueVTs(TLI, DL, CLI.RetTy, RetTys); |
| |
| SmallVector<ISD::OutputArg, 4> Outs; |
| GetReturnInfo(CLI.CallConv, CLI.RetTy, getReturnAttrs(CLI), Outs, TLI, DL); |
| |
| bool CanLowerReturn = TLI.CanLowerReturn( |
| CLI.CallConv, *FuncInfo.MF, CLI.IsVarArg, Outs, CLI.RetTy->getContext()); |
| |
| // FIXME: sret demotion isn't supported yet - bail out. |
| if (!CanLowerReturn) |
| return false; |
| |
| for (unsigned I = 0, E = RetTys.size(); I != E; ++I) { |
| EVT VT = RetTys[I]; |
| MVT RegisterVT = TLI.getRegisterType(CLI.RetTy->getContext(), VT); |
| unsigned NumRegs = TLI.getNumRegisters(CLI.RetTy->getContext(), VT); |
| for (unsigned i = 0; i != NumRegs; ++i) { |
| ISD::InputArg MyFlags; |
| MyFlags.VT = RegisterVT; |
| MyFlags.ArgVT = VT; |
| MyFlags.Used = CLI.IsReturnValueUsed; |
| if (CLI.RetSExt) |
| MyFlags.Flags.setSExt(); |
| if (CLI.RetZExt) |
| MyFlags.Flags.setZExt(); |
| if (CLI.IsInReg) |
| MyFlags.Flags.setInReg(); |
| CLI.Ins.push_back(MyFlags); |
| } |
| } |
| |
| // Handle all of the outgoing arguments. |
| CLI.clearOuts(); |
| for (auto &Arg : CLI.getArgs()) { |
| Type *FinalType = Arg.Ty; |
| if (Arg.IsByVal) |
| FinalType = cast<PointerType>(Arg.Ty)->getElementType(); |
| bool NeedsRegBlock = TLI.functionArgumentNeedsConsecutiveRegisters( |
| FinalType, CLI.CallConv, CLI.IsVarArg); |
| |
| ISD::ArgFlagsTy Flags; |
| if (Arg.IsZExt) |
| Flags.setZExt(); |
| if (Arg.IsSExt) |
| Flags.setSExt(); |
| if (Arg.IsInReg) |
| Flags.setInReg(); |
| if (Arg.IsSRet) |
| Flags.setSRet(); |
| if (Arg.IsSwiftSelf) |
| Flags.setSwiftSelf(); |
| if (Arg.IsSwiftError) |
| Flags.setSwiftError(); |
| if (Arg.IsCFGuardTarget) |
| Flags.setCFGuardTarget(); |
| if (Arg.IsByVal) |
| Flags.setByVal(); |
| if (Arg.IsInAlloca) { |
| Flags.setInAlloca(); |
| // Set the byval flag for CCAssignFn callbacks that don't know about |
| // inalloca. This way we can know how many bytes we should've allocated |
| // and how many bytes a callee cleanup function will pop. If we port |
| // inalloca to more targets, we'll have to add custom inalloca handling in |
| // the various CC lowering callbacks. |
| Flags.setByVal(); |
| } |
| if (Arg.IsByVal || Arg.IsInAlloca) { |
| PointerType *Ty = cast<PointerType>(Arg.Ty); |
| Type *ElementTy = Ty->getElementType(); |
| unsigned FrameSize = |
| DL.getTypeAllocSize(Arg.ByValType ? Arg.ByValType : ElementTy); |
| |
| // For ByVal, alignment should come from FE. BE will guess if this info |
| // is not there, but there are cases it cannot get right. |
| unsigned FrameAlign = Arg.Alignment; |
| if (!FrameAlign) |
| FrameAlign = TLI.getByValTypeAlignment(ElementTy, DL); |
| Flags.setByValSize(FrameSize); |
| Flags.setByValAlign(Align(FrameAlign)); |
| } |
| if (Arg.IsNest) |
| Flags.setNest(); |
| if (NeedsRegBlock) |
| Flags.setInConsecutiveRegs(); |
| Flags.setOrigAlign(Align(DL.getABITypeAlignment(Arg.Ty))); |
| |
| CLI.OutVals.push_back(Arg.Val); |
| CLI.OutFlags.push_back(Flags); |
| } |
| |
| if (!fastLowerCall(CLI)) |
| return false; |
| |
| // Set all unused physreg defs as dead. |
| assert(CLI.Call && "No call instruction specified."); |
| CLI.Call->setPhysRegsDeadExcept(CLI.InRegs, TRI); |
| |
| if (CLI.NumResultRegs && CLI.CS) |
| updateValueMap(CLI.CS->getInstruction(), CLI.ResultReg, CLI.NumResultRegs); |
| |
| // Set labels for heapallocsite call. |
| if (CLI.CS) |
| if (MDNode *MD = CLI.CS->getInstruction()->getMetadata("heapallocsite")) |
| CLI.Call->setHeapAllocMarker(*MF, MD); |
| |
| return true; |
| } |
| |
| bool FastISel::lowerCall(const CallInst *CI) { |
| ImmutableCallSite CS(CI); |
| |
| FunctionType *FuncTy = CS.getFunctionType(); |
| Type *RetTy = CS.getType(); |
| |
| ArgListTy Args; |
| ArgListEntry Entry; |
| Args.reserve(CS.arg_size()); |
| |
| for (ImmutableCallSite::arg_iterator i = CS.arg_begin(), e = CS.arg_end(); |
| i != e; ++i) { |
| Value *V = *i; |
| |
| // Skip empty types |
| if (V->getType()->isEmptyTy()) |
| continue; |
| |
| Entry.Val = V; |
| Entry.Ty = V->getType(); |
| |
| // Skip the first return-type Attribute to get to params. |
| Entry.setAttributes(&CS, i - CS.arg_begin()); |
| Args.push_back(Entry); |
| } |
| |
| // Check if target-independent constraints permit a tail call here. |
| // Target-dependent constraints are checked within fastLowerCall. |
| bool IsTailCall = CI->isTailCall(); |
| if (IsTailCall && !isInTailCallPosition(CS, TM)) |
| IsTailCall = false; |
| if (IsTailCall && MF->getFunction() |
| .getFnAttribute("disable-tail-calls") |
| .getValueAsString() == "true") |
| IsTailCall = false; |
| |
| CallLoweringInfo CLI; |
| CLI.setCallee(RetTy, FuncTy, CI->getCalledValue(), std::move(Args), CS) |
| .setTailCall(IsTailCall); |
| |
| return lowerCallTo(CLI); |
| } |
| |
| bool FastISel::selectCall(const User *I) { |
| const CallInst *Call = cast<CallInst>(I); |
| |
| // Handle simple inline asms. |
| if (const InlineAsm *IA = dyn_cast<InlineAsm>(Call->getCalledValue())) { |
| // If the inline asm has side effects, then make sure that no local value |
| // lives across by flushing the local value map. |
| if (IA->hasSideEffects()) |
| flushLocalValueMap(); |
| |
| // Don't attempt to handle constraints. |
| if (!IA->getConstraintString().empty()) |
| return false; |
| |
| unsigned ExtraInfo = 0; |
| if (IA->hasSideEffects()) |
| ExtraInfo |= InlineAsm::Extra_HasSideEffects; |
| if (IA->isAlignStack()) |
| ExtraInfo |= InlineAsm::Extra_IsAlignStack; |
| ExtraInfo |= IA->getDialect() * InlineAsm::Extra_AsmDialect; |
| |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::INLINEASM)) |
| .addExternalSymbol(IA->getAsmString().c_str()) |
| .addImm(ExtraInfo); |
| return true; |
| } |
| |
| // Handle intrinsic function calls. |
| if (const auto *II = dyn_cast<IntrinsicInst>(Call)) |
| return selectIntrinsicCall(II); |
| |
| // Usually, it does not make sense to initialize a value, |
| // make an unrelated function call and use the value, because |
| // it tends to be spilled on the stack. So, we move the pointer |
| // to the last local value to the beginning of the block, so that |
| // all the values which have already been materialized, |
| // appear after the call. It also makes sense to skip intrinsics |
| // since they tend to be inlined. |
| flushLocalValueMap(); |
| |
| return lowerCall(Call); |
| } |
| |
| bool FastISel::selectIntrinsicCall(const IntrinsicInst *II) { |
| switch (II->getIntrinsicID()) { |
| default: |
| break; |
| // At -O0 we don't care about the lifetime intrinsics. |
| case Intrinsic::lifetime_start: |
| case Intrinsic::lifetime_end: |
| // The donothing intrinsic does, well, nothing. |
| case Intrinsic::donothing: |
| // Neither does the sideeffect intrinsic. |
| case Intrinsic::sideeffect: |
| // Neither does the assume intrinsic; it's also OK not to codegen its operand. |
| case Intrinsic::assume: |
| return true; |
| case Intrinsic::dbg_declare: { |
| const DbgDeclareInst *DI = cast<DbgDeclareInst>(II); |
| assert(DI->getVariable() && "Missing variable"); |
| if (!FuncInfo.MF->getMMI().hasDebugInfo()) { |
| LLVM_DEBUG(dbgs() << "Dropping debug info for " << *DI << "\n"); |
| return true; |
| } |
| |
| const Value *Address = DI->getAddress(); |
| if (!Address || isa<UndefValue>(Address)) { |
| LLVM_DEBUG(dbgs() << "Dropping debug info for " << *DI << "\n"); |
| return true; |
| } |
| |
| // Byval arguments with frame indices were already handled after argument |
| // lowering and before isel. |
| const auto *Arg = |
| dyn_cast<Argument>(Address->stripInBoundsConstantOffsets()); |
| if (Arg && FuncInfo.getArgumentFrameIndex(Arg) != INT_MAX) |
| return true; |
| |
| Optional<MachineOperand> Op; |
| if (unsigned Reg = lookUpRegForValue(Address)) |
| Op = MachineOperand::CreateReg(Reg, false); |
| |
| // If we have a VLA that has a "use" in a metadata node that's then used |
| // here but it has no other uses, then we have a problem. E.g., |
| // |
| // int foo (const int *x) { |
| // char a[*x]; |
| // return 0; |
| // } |
| // |
| // If we assign 'a' a vreg and fast isel later on has to use the selection |
| // DAG isel, it will want to copy the value to the vreg. However, there are |
| // no uses, which goes counter to what selection DAG isel expects. |
| if (!Op && !Address->use_empty() && isa<Instruction>(Address) && |
| (!isa<AllocaInst>(Address) || |
| !FuncInfo.StaticAllocaMap.count(cast<AllocaInst>(Address)))) |
| Op = MachineOperand::CreateReg(FuncInfo.InitializeRegForValue(Address), |
| false); |
| |
| if (Op) { |
| assert(DI->getVariable()->isValidLocationForIntrinsic(DbgLoc) && |
| "Expected inlined-at fields to agree"); |
| // A dbg.declare describes the address of a source variable, so lower it |
| // into an indirect DBG_VALUE. |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::DBG_VALUE), /*IsIndirect*/ true, |
| *Op, DI->getVariable(), DI->getExpression()); |
| } else { |
| // We can't yet handle anything else here because it would require |
| // generating code, thus altering codegen because of debug info. |
| LLVM_DEBUG(dbgs() << "Dropping debug info for " << *DI << "\n"); |
| } |
| return true; |
| } |
| case Intrinsic::dbg_value: { |
| // This form of DBG_VALUE is target-independent. |
| const DbgValueInst *DI = cast<DbgValueInst>(II); |
| const MCInstrDesc &II = TII.get(TargetOpcode::DBG_VALUE); |
| const Value *V = DI->getValue(); |
| assert(DI->getVariable()->isValidLocationForIntrinsic(DbgLoc) && |
| "Expected inlined-at fields to agree"); |
| if (!V) { |
| // Currently the optimizer can produce this; insert an undef to |
| // help debugging. Probably the optimizer should not do this. |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, false, 0U, |
| DI->getVariable(), DI->getExpression()); |
| } else if (const auto *CI = dyn_cast<ConstantInt>(V)) { |
| if (CI->getBitWidth() > 64) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addCImm(CI) |
| .addImm(0U) |
| .addMetadata(DI->getVariable()) |
| .addMetadata(DI->getExpression()); |
| else |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addImm(CI->getZExtValue()) |
| .addImm(0U) |
| .addMetadata(DI->getVariable()) |
| .addMetadata(DI->getExpression()); |
| } else if (const auto *CF = dyn_cast<ConstantFP>(V)) { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addFPImm(CF) |
| .addImm(0U) |
| .addMetadata(DI->getVariable()) |
| .addMetadata(DI->getExpression()); |
| } else if (unsigned Reg = lookUpRegForValue(V)) { |
| // FIXME: This does not handle register-indirect values at offset 0. |
| bool IsIndirect = false; |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, IsIndirect, Reg, |
| DI->getVariable(), DI->getExpression()); |
| } else { |
| // We can't yet handle anything else here because it would require |
| // generating code, thus altering codegen because of debug info. |
| LLVM_DEBUG(dbgs() << "Dropping debug info for " << *DI << "\n"); |
| } |
| return true; |
| } |
| case Intrinsic::dbg_label: { |
| const DbgLabelInst *DI = cast<DbgLabelInst>(II); |
| assert(DI->getLabel() && "Missing label"); |
| if (!FuncInfo.MF->getMMI().hasDebugInfo()) { |
| LLVM_DEBUG(dbgs() << "Dropping debug info for " << *DI << "\n"); |
| return true; |
| } |
| |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::DBG_LABEL)).addMetadata(DI->getLabel()); |
| return true; |
| } |
| case Intrinsic::objectsize: |
| llvm_unreachable("llvm.objectsize.* should have been lowered already"); |
| |
| case Intrinsic::is_constant: |
| llvm_unreachable("llvm.is.constant.* should have been lowered already"); |
| |
| case Intrinsic::launder_invariant_group: |
| case Intrinsic::strip_invariant_group: |
| case Intrinsic::expect: { |
| unsigned ResultReg = getRegForValue(II->getArgOperand(0)); |
| if (!ResultReg) |
| return false; |
| updateValueMap(II, ResultReg); |
| return true; |
| } |
| case Intrinsic::experimental_stackmap: |
| return selectStackmap(II); |
| case Intrinsic::experimental_patchpoint_void: |
| case Intrinsic::experimental_patchpoint_i64: |
| return selectPatchpoint(II); |
| |
| case Intrinsic::xray_customevent: |
| return selectXRayCustomEvent(II); |
| case Intrinsic::xray_typedevent: |
| return selectXRayTypedEvent(II); |
| } |
| |
| return fastLowerIntrinsicCall(II); |
| } |
| |
| bool FastISel::selectCast(const User *I, unsigned Opcode) { |
| EVT SrcVT = TLI.getValueType(DL, I->getOperand(0)->getType()); |
| EVT DstVT = TLI.getValueType(DL, I->getType()); |
| |
| if (SrcVT == MVT::Other || !SrcVT.isSimple() || DstVT == MVT::Other || |
| !DstVT.isSimple()) |
| // Unhandled type. Halt "fast" selection and bail. |
| return false; |
| |
| // Check if the destination type is legal. |
| if (!TLI.isTypeLegal(DstVT)) |
| return false; |
| |
| // Check if the source operand is legal. |
| if (!TLI.isTypeLegal(SrcVT)) |
| return false; |
| |
| unsigned InputReg = getRegForValue(I->getOperand(0)); |
| if (!InputReg) |
| // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| |
| bool InputRegIsKill = hasTrivialKill(I->getOperand(0)); |
| |
| unsigned ResultReg = fastEmit_r(SrcVT.getSimpleVT(), DstVT.getSimpleVT(), |
| Opcode, InputReg, InputRegIsKill); |
| if (!ResultReg) |
| return false; |
| |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| bool FastISel::selectBitCast(const User *I) { |
| // If the bitcast doesn't change the type, just use the operand value. |
| if (I->getType() == I->getOperand(0)->getType()) { |
| unsigned Reg = getRegForValue(I->getOperand(0)); |
| if (!Reg) |
| return false; |
| updateValueMap(I, Reg); |
| return true; |
| } |
| |
| // Bitcasts of other values become reg-reg copies or BITCAST operators. |
| EVT SrcEVT = TLI.getValueType(DL, I->getOperand(0)->getType()); |
| EVT DstEVT = TLI.getValueType(DL, I->getType()); |
| if (SrcEVT == MVT::Other || DstEVT == MVT::Other || |
| !TLI.isTypeLegal(SrcEVT) || !TLI.isTypeLegal(DstEVT)) |
| // Unhandled type. Halt "fast" selection and bail. |
| return false; |
| |
| MVT SrcVT = SrcEVT.getSimpleVT(); |
| MVT DstVT = DstEVT.getSimpleVT(); |
| unsigned Op0 = getRegForValue(I->getOperand(0)); |
| if (!Op0) // Unhandled operand. Halt "fast" selection and bail. |
| return false; |
| bool Op0IsKill = hasTrivialKill(I->getOperand(0)); |
| |
| // First, try to perform the bitcast by inserting a reg-reg copy. |
| unsigned ResultReg = 0; |
| if (SrcVT == DstVT) { |
| const TargetRegisterClass *SrcClass = TLI.getRegClassFor(SrcVT); |
| const TargetRegisterClass *DstClass = TLI.getRegClassFor(DstVT); |
| // Don't attempt a cross-class copy. It will likely fail. |
| if (SrcClass == DstClass) { |
| ResultReg = createResultReg(DstClass); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(Op0); |
| } |
| } |
| |
| // If the reg-reg copy failed, select a BITCAST opcode. |
| if (!ResultReg) |
| ResultReg = fastEmit_r(SrcVT, DstVT, ISD::BITCAST, Op0, Op0IsKill); |
| |
| if (!ResultReg) |
| return false; |
| |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| // Remove local value instructions starting from the instruction after |
| // SavedLastLocalValue to the current function insert point. |
| void FastISel::removeDeadLocalValueCode(MachineInstr *SavedLastLocalValue) |
| { |
| MachineInstr *CurLastLocalValue = getLastLocalValue(); |
| if (CurLastLocalValue != SavedLastLocalValue) { |
| // Find the first local value instruction to be deleted. |
| // This is the instruction after SavedLastLocalValue if it is non-NULL. |
| // Otherwise it's the first instruction in the block. |
| MachineBasicBlock::iterator FirstDeadInst(SavedLastLocalValue); |
| if (SavedLastLocalValue) |
| ++FirstDeadInst; |
| else |
| FirstDeadInst = FuncInfo.MBB->getFirstNonPHI(); |
| setLastLocalValue(SavedLastLocalValue); |
| removeDeadCode(FirstDeadInst, FuncInfo.InsertPt); |
| } |
| } |
| |
| bool FastISel::selectInstruction(const Instruction *I) { |
| MachineInstr *SavedLastLocalValue = getLastLocalValue(); |
| // Just before the terminator instruction, insert instructions to |
| // feed PHI nodes in successor blocks. |
| if (I->isTerminator()) { |
| if (!handlePHINodesInSuccessorBlocks(I->getParent())) { |
| // PHI node handling may have generated local value instructions, |
| // even though it failed to handle all PHI nodes. |
| // We remove these instructions because SelectionDAGISel will generate |
| // them again. |
| removeDeadLocalValueCode(SavedLastLocalValue); |
| return false; |
| } |
| } |
| |
| // FastISel does not handle any operand bundles except OB_funclet. |
| if (ImmutableCallSite CS = ImmutableCallSite(I)) |
| for (unsigned i = 0, e = CS.getNumOperandBundles(); i != e; ++i) |
| if (CS.getOperandBundleAt(i).getTagID() != LLVMContext::OB_funclet) |
| return false; |
| |
| DbgLoc = I->getDebugLoc(); |
| |
| SavedInsertPt = FuncInfo.InsertPt; |
| |
| if (const auto *Call = dyn_cast<CallInst>(I)) { |
| const Function *F = Call->getCalledFunction(); |
| LibFunc Func; |
| |
| // As a special case, don't handle calls to builtin library functions that |
| // may be translated directly to target instructions. |
| if (F && !F->hasLocalLinkage() && F->hasName() && |
| LibInfo->getLibFunc(F->getName(), Func) && |
| LibInfo->hasOptimizedCodeGen(Func)) |
| return false; |
| |
| // Don't handle Intrinsic::trap if a trap function is specified. |
| if (F && F->getIntrinsicID() == Intrinsic::trap && |
| Call->hasFnAttr("trap-func-name")) |
| return false; |
| } |
| |
| // First, try doing target-independent selection. |
| if (!SkipTargetIndependentISel) { |
| if (selectOperator(I, I->getOpcode())) { |
| ++NumFastIselSuccessIndependent; |
| DbgLoc = DebugLoc(); |
| return true; |
| } |
| // Remove dead code. |
| recomputeInsertPt(); |
| if (SavedInsertPt != FuncInfo.InsertPt) |
| removeDeadCode(FuncInfo.InsertPt, SavedInsertPt); |
| SavedInsertPt = FuncInfo.InsertPt; |
| } |
| // Next, try calling the target to attempt to handle the instruction. |
| if (fastSelectInstruction(I)) { |
| ++NumFastIselSuccessTarget; |
| DbgLoc = DebugLoc(); |
| return true; |
| } |
| // Remove dead code. |
| recomputeInsertPt(); |
| if (SavedInsertPt != FuncInfo.InsertPt) |
| removeDeadCode(FuncInfo.InsertPt, SavedInsertPt); |
| |
| DbgLoc = DebugLoc(); |
| // Undo phi node updates, because they will be added again by SelectionDAG. |
| if (I->isTerminator()) { |
| // PHI node handling may have generated local value instructions. |
| // We remove them because SelectionDAGISel will generate them again. |
| removeDeadLocalValueCode(SavedLastLocalValue); |
| FuncInfo.PHINodesToUpdate.resize(FuncInfo.OrigNumPHINodesToUpdate); |
| } |
| return false; |
| } |
| |
| /// Emit an unconditional branch to the given block, unless it is the immediate |
| /// (fall-through) successor, and update the CFG. |
| void FastISel::fastEmitBranch(MachineBasicBlock *MSucc, |
| const DebugLoc &DbgLoc) { |
| if (FuncInfo.MBB->getBasicBlock()->sizeWithoutDebug() > 1 && |
| FuncInfo.MBB->isLayoutSuccessor(MSucc)) { |
| // For more accurate line information if this is the only non-debug |
| // instruction in the block then emit it, otherwise we have the |
| // unconditional fall-through case, which needs no instructions. |
| } else { |
| // The unconditional branch case. |
| TII.insertBranch(*FuncInfo.MBB, MSucc, nullptr, |
| SmallVector<MachineOperand, 0>(), DbgLoc); |
| } |
| if (FuncInfo.BPI) { |
| auto BranchProbability = FuncInfo.BPI->getEdgeProbability( |
| FuncInfo.MBB->getBasicBlock(), MSucc->getBasicBlock()); |
| FuncInfo.MBB->addSuccessor(MSucc, BranchProbability); |
| } else |
| FuncInfo.MBB->addSuccessorWithoutProb(MSucc); |
| } |
| |
| void FastISel::finishCondBranch(const BasicBlock *BranchBB, |
| MachineBasicBlock *TrueMBB, |
| MachineBasicBlock *FalseMBB) { |
| // Add TrueMBB as successor unless it is equal to the FalseMBB: This can |
| // happen in degenerate IR and MachineIR forbids to have a block twice in the |
| // successor/predecessor lists. |
| if (TrueMBB != FalseMBB) { |
| if (FuncInfo.BPI) { |
| auto BranchProbability = |
| FuncInfo.BPI->getEdgeProbability(BranchBB, TrueMBB->getBasicBlock()); |
| FuncInfo.MBB->addSuccessor(TrueMBB, BranchProbability); |
| } else |
| FuncInfo.MBB->addSuccessorWithoutProb(TrueMBB); |
| } |
| |
| fastEmitBranch(FalseMBB, DbgLoc); |
| } |
| |
| /// Emit an FNeg operation. |
| bool FastISel::selectFNeg(const User *I, const Value *In) { |
| unsigned OpReg = getRegForValue(In); |
| if (!OpReg) |
| return false; |
| bool OpRegIsKill = hasTrivialKill(In); |
| |
| // If the target has ISD::FNEG, use it. |
| EVT VT = TLI.getValueType(DL, I->getType()); |
| unsigned ResultReg = fastEmit_r(VT.getSimpleVT(), VT.getSimpleVT(), ISD::FNEG, |
| OpReg, OpRegIsKill); |
| if (ResultReg) { |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| // Bitcast the value to integer, twiddle the sign bit with xor, |
| // and then bitcast it back to floating-point. |
| if (VT.getSizeInBits() > 64) |
| return false; |
| EVT IntVT = EVT::getIntegerVT(I->getContext(), VT.getSizeInBits()); |
| if (!TLI.isTypeLegal(IntVT)) |
| return false; |
| |
| unsigned IntReg = fastEmit_r(VT.getSimpleVT(), IntVT.getSimpleVT(), |
| ISD::BITCAST, OpReg, OpRegIsKill); |
| if (!IntReg) |
| return false; |
| |
| unsigned IntResultReg = fastEmit_ri_( |
| IntVT.getSimpleVT(), ISD::XOR, IntReg, /*IsKill=*/true, |
| UINT64_C(1) << (VT.getSizeInBits() - 1), IntVT.getSimpleVT()); |
| if (!IntResultReg) |
| return false; |
| |
| ResultReg = fastEmit_r(IntVT.getSimpleVT(), VT.getSimpleVT(), ISD::BITCAST, |
| IntResultReg, /*IsKill=*/true); |
| if (!ResultReg) |
| return false; |
| |
| updateValueMap(I, ResultReg); |
| return true; |
| } |
| |
| bool FastISel::selectExtractValue(const User *U) { |
| const ExtractValueInst *EVI = dyn_cast<ExtractValueInst>(U); |
| if (!EVI) |
| return false; |
| |
| // Make sure we only try to handle extracts with a legal result. But also |
| // allow i1 because it's easy. |
| EVT RealVT = TLI.getValueType(DL, EVI->getType(), /*AllowUnknown=*/true); |
| if (!RealVT.isSimple()) |
| return false; |
| MVT VT = RealVT.getSimpleVT(); |
| if (!TLI.isTypeLegal(VT) && VT != MVT::i1) |
| return false; |
| |
| const Value *Op0 = EVI->getOperand(0); |
| Type *AggTy = Op0->getType(); |
| |
| // Get the base result register. |
| unsigned ResultReg; |
| DenseMap<const Value *, unsigned>::iterator I = FuncInfo.ValueMap.find(Op0); |
| if (I != FuncInfo.ValueMap.end()) |
| ResultReg = I->second; |
| else if (isa<Instruction>(Op0)) |
| ResultReg = FuncInfo.InitializeRegForValue(Op0); |
| else |
| return false; // fast-isel can't handle aggregate constants at the moment |
| |
| // Get the actual result register, which is an offset from the base register. |
| unsigned VTIndex = ComputeLinearIndex(AggTy, EVI->getIndices()); |
| |
| SmallVector<EVT, 4> AggValueVTs; |
| ComputeValueVTs(TLI, DL, AggTy, AggValueVTs); |
| |
| for (unsigned i = 0; i < VTIndex; i++) |
| ResultReg += TLI.getNumRegisters(FuncInfo.Fn->getContext(), AggValueVTs[i]); |
| |
| updateValueMap(EVI, ResultReg); |
| return true; |
| } |
| |
| bool FastISel::selectOperator(const User *I, unsigned Opcode) { |
| switch (Opcode) { |
| case Instruction::Add: |
| return selectBinaryOp(I, ISD::ADD); |
| case Instruction::FAdd: |
| return selectBinaryOp(I, ISD::FADD); |
| case Instruction::Sub: |
| return selectBinaryOp(I, ISD::SUB); |
| case Instruction::FSub: { |
| // FNeg is currently represented in LLVM IR as a special case of FSub. |
| Value *X; |
| if (match(I, m_FNeg(m_Value(X)))) |
| return selectFNeg(I, X); |
| return selectBinaryOp(I, ISD::FSUB); |
| } |
| case Instruction::Mul: |
| return selectBinaryOp(I, ISD::MUL); |
| case Instruction::FMul: |
| return selectBinaryOp(I, ISD::FMUL); |
| case Instruction::SDiv: |
| return selectBinaryOp(I, ISD::SDIV); |
| case Instruction::UDiv: |
| return selectBinaryOp(I, ISD::UDIV); |
| case Instruction::FDiv: |
| return selectBinaryOp(I, ISD::FDIV); |
| case Instruction::SRem: |
| return selectBinaryOp(I, ISD::SREM); |
| case Instruction::URem: |
| return selectBinaryOp(I, ISD::UREM); |
| case Instruction::FRem: |
| return selectBinaryOp(I, ISD::FREM); |
| case Instruction::Shl: |
| return selectBinaryOp(I, ISD::SHL); |
| case Instruction::LShr: |
| return selectBinaryOp(I, ISD::SRL); |
| case Instruction::AShr: |
| return selectBinaryOp(I, ISD::SRA); |
| case Instruction::And: |
| return selectBinaryOp(I, ISD::AND); |
| case Instruction::Or: |
| return selectBinaryOp(I, ISD::OR); |
| case Instruction::Xor: |
| return selectBinaryOp(I, ISD::XOR); |
| |
| case Instruction::FNeg: |
| return selectFNeg(I, I->getOperand(0)); |
| |
| case Instruction::GetElementPtr: |
| return selectGetElementPtr(I); |
| |
| case Instruction::Br: { |
| const BranchInst *BI = cast<BranchInst>(I); |
| |
| if (BI->isUnconditional()) { |
| const BasicBlock *LLVMSucc = BI->getSuccessor(0); |
| MachineBasicBlock *MSucc = FuncInfo.MBBMap[LLVMSucc]; |
| fastEmitBranch(MSucc, BI->getDebugLoc()); |
| return true; |
| } |
| |
| // Conditional branches are not handed yet. |
| // Halt "fast" selection and bail. |
| return false; |
| } |
| |
| case Instruction::Unreachable: |
| if (TM.Options.TrapUnreachable) |
| return fastEmit_(MVT::Other, MVT::Other, ISD::TRAP) != 0; |
| else |
| return true; |
| |
| case Instruction::Alloca: |
| // FunctionLowering has the static-sized case covered. |
| if (FuncInfo.StaticAllocaMap.count(cast<AllocaInst>(I))) |
| return true; |
| |
| // Dynamic-sized alloca is not handled yet. |
| return false; |
| |
| case Instruction::Call: |
| // On AIX, call lowering uses the DAG-ISEL path currently so that the |
| // callee of the direct function call instruction will be mapped to the |
| // symbol for the function's entry point, which is distinct from the |
| // function descriptor symbol. The latter is the symbol whose XCOFF symbol |
| // name is the C-linkage name of the source level function. |
| if (TM.getTargetTriple().isOSAIX()) |
| return false; |
| return selectCall(I); |
| |
| case Instruction::BitCast: |
| return selectBitCast(I); |
| |
| case Instruction::FPToSI: |
| return selectCast(I, ISD::FP_TO_SINT); |
| case Instruction::ZExt: |
| return selectCast(I, ISD::ZERO_EXTEND); |
| case Instruction::SExt: |
| return selectCast(I, ISD::SIGN_EXTEND); |
| case Instruction::Trunc: |
| return selectCast(I, ISD::TRUNCATE); |
| case Instruction::SIToFP: |
| return selectCast(I, ISD::SINT_TO_FP); |
| |
| case Instruction::IntToPtr: // Deliberate fall-through. |
| case Instruction::PtrToInt: { |
| EVT SrcVT = TLI.getValueType(DL, I->getOperand(0)->getType()); |
| EVT DstVT = TLI.getValueType(DL, I->getType()); |
| if (DstVT.bitsGT(SrcVT)) |
| return selectCast(I, ISD::ZERO_EXTEND); |
| if (DstVT.bitsLT(SrcVT)) |
| return selectCast(I, ISD::TRUNCATE); |
| unsigned Reg = getRegForValue(I->getOperand(0)); |
| if (!Reg) |
| return false; |
| updateValueMap(I, Reg); |
| return true; |
| } |
| |
| case Instruction::ExtractValue: |
| return selectExtractValue(I); |
| |
| case Instruction::PHI: |
| llvm_unreachable("FastISel shouldn't visit PHI nodes!"); |
| |
| default: |
| // Unhandled instruction. Halt "fast" selection and bail. |
| return false; |
| } |
| } |
| |
| FastISel::FastISel(FunctionLoweringInfo &FuncInfo, |
| const TargetLibraryInfo *LibInfo, |
| bool SkipTargetIndependentISel) |
| : FuncInfo(FuncInfo), MF(FuncInfo.MF), MRI(FuncInfo.MF->getRegInfo()), |
| MFI(FuncInfo.MF->getFrameInfo()), MCP(*FuncInfo.MF->getConstantPool()), |
| TM(FuncInfo.MF->getTarget()), DL(MF->getDataLayout()), |
| TII(*MF->getSubtarget().getInstrInfo()), |
| TLI(*MF->getSubtarget().getTargetLowering()), |
| TRI(*MF->getSubtarget().getRegisterInfo()), LibInfo(LibInfo), |
| SkipTargetIndependentISel(SkipTargetIndependentISel), |
| LastLocalValue(nullptr), EmitStartPt(nullptr) {} |
| |
| FastISel::~FastISel() = default; |
| |
| bool FastISel::fastLowerArguments() { return false; } |
| |
| bool FastISel::fastLowerCall(CallLoweringInfo & /*CLI*/) { return false; } |
| |
| bool FastISel::fastLowerIntrinsicCall(const IntrinsicInst * /*II*/) { |
| return false; |
| } |
| |
| unsigned FastISel::fastEmit_(MVT, MVT, unsigned) { return 0; } |
| |
| unsigned FastISel::fastEmit_r(MVT, MVT, unsigned, unsigned /*Op0*/, |
| bool /*Op0IsKill*/) { |
| return 0; |
| } |
| |
| unsigned FastISel::fastEmit_rr(MVT, MVT, unsigned, unsigned /*Op0*/, |
| bool /*Op0IsKill*/, unsigned /*Op1*/, |
| bool /*Op1IsKill*/) { |
| return 0; |
| } |
| |
| unsigned FastISel::fastEmit_i(MVT, MVT, unsigned, uint64_t /*Imm*/) { |
| return 0; |
| } |
| |
| unsigned FastISel::fastEmit_f(MVT, MVT, unsigned, |
| const ConstantFP * /*FPImm*/) { |
| return 0; |
| } |
| |
| unsigned FastISel::fastEmit_ri(MVT, MVT, unsigned, unsigned /*Op0*/, |
| bool /*Op0IsKill*/, uint64_t /*Imm*/) { |
| return 0; |
| } |
| |
| /// This method is a wrapper of fastEmit_ri. It first tries to emit an |
| /// instruction with an immediate operand using fastEmit_ri. |
| /// If that fails, it materializes the immediate into a register and try |
| /// fastEmit_rr instead. |
| unsigned FastISel::fastEmit_ri_(MVT VT, unsigned Opcode, unsigned Op0, |
| bool Op0IsKill, uint64_t Imm, MVT ImmType) { |
| // If this is a multiply by a power of two, emit this as a shift left. |
| if (Opcode == ISD::MUL && isPowerOf2_64(Imm)) { |
| Opcode = ISD::SHL; |
| Imm = Log2_64(Imm); |
| } else if (Opcode == ISD::UDIV && isPowerOf2_64(Imm)) { |
| // div x, 8 -> srl x, 3 |
| Opcode = ISD::SRL; |
| Imm = Log2_64(Imm); |
| } |
| |
| // Horrible hack (to be removed), check to make sure shift amounts are |
| // in-range. |
| if ((Opcode == ISD::SHL || Opcode == ISD::SRA || Opcode == ISD::SRL) && |
| Imm >= VT.getSizeInBits()) |
| return 0; |
| |
| // First check if immediate type is legal. If not, we can't use the ri form. |
| unsigned ResultReg = fastEmit_ri(VT, VT, Opcode, Op0, Op0IsKill, Imm); |
| if (ResultReg) |
| return ResultReg; |
| unsigned MaterialReg = fastEmit_i(ImmType, ImmType, ISD::Constant, Imm); |
| bool IsImmKill = true; |
| if (!MaterialReg) { |
| // This is a bit ugly/slow, but failing here means falling out of |
| // fast-isel, which would be very slow. |
| IntegerType *ITy = |
| IntegerType::get(FuncInfo.Fn->getContext(), VT.getSizeInBits()); |
| MaterialReg = getRegForValue(ConstantInt::get(ITy, Imm)); |
| if (!MaterialReg) |
| return 0; |
| // FIXME: If the materialized register here has no uses yet then this |
| // will be the first use and we should be able to mark it as killed. |
| // However, the local value area for materialising constant expressions |
| // grows down, not up, which means that any constant expressions we generate |
| // later which also use 'Imm' could be after this instruction and therefore |
| // after this kill. |
| IsImmKill = false; |
| } |
| return fastEmit_rr(VT, VT, Opcode, Op0, Op0IsKill, MaterialReg, IsImmKill); |
| } |
| |
| unsigned FastISel::createResultReg(const TargetRegisterClass *RC) { |
| return MRI.createVirtualRegister(RC); |
| } |
| |
| unsigned FastISel::constrainOperandRegClass(const MCInstrDesc &II, unsigned Op, |
| unsigned OpNum) { |
| if (Register::isVirtualRegister(Op)) { |
| const TargetRegisterClass *RegClass = |
| TII.getRegClass(II, OpNum, &TRI, *FuncInfo.MF); |
| if (!MRI.constrainRegClass(Op, RegClass)) { |
| // If it's not legal to COPY between the register classes, something |
| // has gone very wrong before we got here. |
| unsigned NewOp = createResultReg(RegClass); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), NewOp).addReg(Op); |
| return NewOp; |
| } |
| } |
| return Op; |
| } |
| |
| unsigned FastISel::fastEmitInst_(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC) { |
| unsigned ResultReg = createResultReg(RC); |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg); |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_r(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_rr(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill, unsigned Op1, |
| bool Op1IsKill) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| Op1 = constrainOperandRegClass(II, Op1, II.getNumDefs() + 1); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_rrr(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill, unsigned Op1, |
| bool Op1IsKill, unsigned Op2, |
| bool Op2IsKill) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| Op1 = constrainOperandRegClass(II, Op1, II.getNumDefs() + 1); |
| Op2 = constrainOperandRegClass(II, Op2, II.getNumDefs() + 2); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)) |
| .addReg(Op2, getKillRegState(Op2IsKill)); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)) |
| .addReg(Op2, getKillRegState(Op2IsKill)); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_ri(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill, uint64_t Imm) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addImm(Imm); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addImm(Imm); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_rii(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill, uint64_t Imm1, |
| uint64_t Imm2) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addImm(Imm1) |
| .addImm(Imm2); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addImm(Imm1) |
| .addImm(Imm2); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_f(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, |
| const ConstantFP *FPImm) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addFPImm(FPImm); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addFPImm(FPImm); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_rri(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, unsigned Op0, |
| bool Op0IsKill, unsigned Op1, |
| bool Op1IsKill, uint64_t Imm) { |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| unsigned ResultReg = createResultReg(RC); |
| Op0 = constrainOperandRegClass(II, Op0, II.getNumDefs()); |
| Op1 = constrainOperandRegClass(II, Op1, II.getNumDefs() + 1); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)) |
| .addImm(Imm); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II) |
| .addReg(Op0, getKillRegState(Op0IsKill)) |
| .addReg(Op1, getKillRegState(Op1IsKill)) |
| .addImm(Imm); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_i(unsigned MachineInstOpcode, |
| const TargetRegisterClass *RC, uint64_t Imm) { |
| unsigned ResultReg = createResultReg(RC); |
| const MCInstrDesc &II = TII.get(MachineInstOpcode); |
| |
| if (II.getNumDefs() >= 1) |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II, ResultReg) |
| .addImm(Imm); |
| else { |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, II).addImm(Imm); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, |
| TII.get(TargetOpcode::COPY), ResultReg).addReg(II.ImplicitDefs[0]); |
| } |
| return ResultReg; |
| } |
| |
| unsigned FastISel::fastEmitInst_extractsubreg(MVT RetVT, unsigned Op0, |
| bool Op0IsKill, uint32_t Idx) { |
| unsigned ResultReg = createResultReg(TLI.getRegClassFor(RetVT)); |
| assert(Register::isVirtualRegister(Op0) && |
| "Cannot yet extract from physregs"); |
| const TargetRegisterClass *RC = MRI.getRegClass(Op0); |
| MRI.constrainRegClass(Op0, TRI.getSubClassWithSubReg(RC, Idx)); |
| BuildMI(*FuncInfo.MBB, FuncInfo.InsertPt, DbgLoc, TII.get(TargetOpcode::COPY), |
| ResultReg).addReg(Op0, getKillRegState(Op0IsKill), Idx); |
| return ResultReg; |
| } |
| |
| /// Emit MachineInstrs to compute the value of Op with all but the least |
| /// significant bit set to zero. |
| unsigned FastISel::fastEmitZExtFromI1(MVT VT, unsigned Op0, bool Op0IsKill) { |
| return fastEmit_ri(VT, VT, ISD::AND, Op0, Op0IsKill, 1); |
| } |
| |
| /// HandlePHINodesInSuccessorBlocks - Handle PHI nodes in successor blocks. |
| /// Emit code to ensure constants are copied into registers when needed. |
| /// Remember the virtual registers that need to be added to the Machine PHI |
| /// nodes as input. We cannot just directly add them, because expansion |
| /// might result in multiple MBB's for one BB. As such, the start of the |
| /// BB might correspond to a different MBB than the end. |
| bool FastISel::handlePHINodesInSuccessorBlocks(const BasicBlock *LLVMBB) { |
| const Instruction *TI = LLVMBB->getTerminator(); |
| |
| SmallPtrSet<MachineBasicBlock *, 4> SuccsHandled; |
| FuncInfo.OrigNumPHINodesToUpdate = FuncInfo.PHINodesToUpdate.size(); |
| |
| // Check successor nodes' PHI nodes that expect a constant to be available |
| // from this block. |
| for (unsigned succ = 0, e = TI->getNumSuccessors(); succ != e; ++succ) { |
| const BasicBlock *SuccBB = TI->getSuccessor(succ); |
| if (!isa<PHINode>(SuccBB->begin())) |
| continue; |
| MachineBasicBlock *SuccMBB = FuncInfo.MBBMap[SuccBB]; |
| |
| // If this terminator has multiple identical successors (common for |
| // switches), only handle each succ once. |
| if (!SuccsHandled.insert(SuccMBB).second) |
| continue; |
| |
| MachineBasicBlock::iterator MBBI = SuccMBB->begin(); |
| |
| // At this point we know that there is a 1-1 correspondence between LLVM PHI |
| // nodes and Machine PHI nodes, but the incoming operands have not been |
| // emitted yet. |
| for (const PHINode &PN : SuccBB->phis()) { |
| // Ignore dead phi's. |
| if (PN.use_empty()) |
| continue; |
| |
| // Only handle legal types. Two interesting things to note here. First, |
| // by bailing out early, we may leave behind some dead instructions, |
| // since SelectionDAG's HandlePHINodesInSuccessorBlocks will insert its |
| // own moves. Second, this check is necessary because FastISel doesn't |
| // use CreateRegs to create registers, so it always creates |
| // exactly one register for each non-void instruction. |
| EVT VT = TLI.getValueType(DL, PN.getType(), /*AllowUnknown=*/true); |
| if (VT == MVT::Other || !TLI.isTypeLegal(VT)) { |
| // Handle integer promotions, though, because they're common and easy. |
| if (!(VT == MVT::i1 || VT == MVT::i8 || VT == MVT::i16)) { |
| FuncInfo.PHINodesToUpdate.resize(FuncInfo.OrigNumPHINodesToUpdate); |
| return false; |
| } |
| } |
| |
| const Value *PHIOp = PN.getIncomingValueForBlock(LLVMBB); |
| |
| // Set the DebugLoc for the copy. Prefer the location of the operand |
| // if there is one; use the location of the PHI otherwise. |
| DbgLoc = PN.getDebugLoc(); |
| if (const auto *Inst = dyn_cast<Instruction>(PHIOp)) |
| DbgLoc = Inst->getDebugLoc(); |
| |
| unsigned Reg = getRegForValue(PHIOp); |
| if (!Reg) { |
| FuncInfo.PHINodesToUpdate.resize(FuncInfo.OrigNumPHINodesToUpdate); |
| return false; |
| } |
| FuncInfo.PHINodesToUpdate.push_back(std::make_pair(&*MBBI++, Reg)); |
| DbgLoc = DebugLoc(); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool FastISel::tryToFoldLoad(const LoadInst *LI, const Instruction *FoldInst) { |
| assert(LI->hasOneUse() && |
| "tryToFoldLoad expected a LoadInst with a single use"); |
| // We know that the load has a single use, but don't know what it is. If it |
| // isn't one of the folded instructions, then we can't succeed here. Handle |
| // this by scanning the single-use users of the load until we get to FoldInst. |
| unsigned MaxUsers = 6; // Don't scan down huge single-use chains of instrs. |
| |
| const Instruction *TheUser = LI->user_back(); |
| while (TheUser != FoldInst && // Scan up until we find FoldInst. |
| // Stay in the right block. |
| TheUser->getParent() == FoldInst->getParent() && |
| --MaxUsers) { // Don't scan too far. |
| // If there are multiple or no uses of this instruction, then bail out. |
| if (!TheUser->hasOneUse()) |
| return false; |
| |
| TheUser = TheUser->user_back(); |
| } |
| |
| // If we didn't find the fold instruction, then we failed to collapse the |
| // sequence. |
| if (TheUser != FoldInst) |
| return false; |
| |
| // Don't try to fold volatile loads. Target has to deal with alignment |
| // constraints. |
| if (LI->isVolatile()) |
| return false; |
| |
| // Figure out which vreg this is going into. If there is no assigned vreg yet |
| // then there actually was no reference to it. Perhaps the load is referenced |
| // by a dead instruction. |
| unsigned LoadReg = getRegForValue(LI); |
| if (!LoadReg) |
| return false; |
| |
| // We can't fold if this vreg has no uses or more than one use. Multiple uses |
| // may mean that the instruction got lowered to multiple MIs, or the use of |
| // the loaded value ended up being multiple operands of the result. |
| if (!MRI.hasOneUse(LoadReg)) |
| return false; |
| |
| MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LoadReg); |
| MachineInstr *User = RI->getParent(); |
| |
| // Set the insertion point properly. Folding the load can cause generation of |
| // other random instructions (like sign extends) for addressing modes; make |
| // sure they get inserted in a logical place before the new instruction. |
| FuncInfo.InsertPt = User; |
| FuncInfo.MBB = User->getParent(); |
| |
| // Ask the target to try folding the load. |
| return tryToFoldLoadIntoMI(User, RI.getOperandNo(), LI); |
| } |
| |
| bool FastISel::canFoldAddIntoGEP(const User *GEP, const Value *Add) { |
| // Must be an add. |
| if (!isa<AddOperator>(Add)) |
| return false; |
| // Type size needs to match. |
| if (DL.getTypeSizeInBits(GEP->getType()) != |
| DL.getTypeSizeInBits(Add->getType())) |
| return false; |
| // Must be in the same basic block. |
| if (isa<Instruction>(Add) && |
| FuncInfo.MBBMap[cast<Instruction>(Add)->getParent()] != FuncInfo.MBB) |
| return false; |
| // Must have a constant operand. |
| return isa<ConstantInt>(cast<AddOperator>(Add)->getOperand(1)); |
| } |
| |
| MachineMemOperand * |
| FastISel::createMachineMemOperandFor(const Instruction *I) const { |
| const Value *Ptr; |
| Type *ValTy; |
| unsigned Alignment; |
| MachineMemOperand::Flags Flags; |
| bool IsVolatile; |
| |
| if (const auto *LI = dyn_cast<LoadInst>(I)) { |
| Alignment = LI->getAlignment(); |
| IsVolatile = LI->isVolatile(); |
| Flags = MachineMemOperand::MOLoad; |
| Ptr = LI->getPointerOperand(); |
| ValTy = LI->getType(); |
| } else if (const auto *SI = dyn_cast<StoreInst>(I)) { |
| Alignment = SI->getAlignment(); |
| IsVolatile = SI->isVolatile(); |
| Flags = MachineMemOperand::MOStore; |
| Ptr = SI->getPointerOperand(); |
| ValTy = SI->getValueOperand()->getType(); |
| } else |
| return nullptr; |
| |
| bool IsNonTemporal = I->hasMetadata(LLVMContext::MD_nontemporal); |
| bool IsInvariant = I->hasMetadata(LLVMContext::MD_invariant_load); |
| bool IsDereferenceable = I->hasMetadata(LLVMContext::MD_dereferenceable); |
| const MDNode *Ranges = I->getMetadata(LLVMContext::MD_range); |
| |
| AAMDNodes AAInfo; |
| I->getAAMetadata(AAInfo); |
| |
| if (Alignment == 0) // Ensure that codegen never sees alignment 0. |
| Alignment = DL.getABITypeAlignment(ValTy); |
| |
| unsigned Size = DL.getTypeStoreSize(ValTy); |
| |
| if (IsVolatile) |
| Flags |= MachineMemOperand::MOVolatile; |
| if (IsNonTemporal) |
| Flags |= MachineMemOperand::MONonTemporal; |
| if (IsDereferenceable) |
| Flags |= MachineMemOperand::MODereferenceable; |
| if (IsInvariant) |
| Flags |= MachineMemOperand::MOInvariant; |
| |
| return FuncInfo.MF->getMachineMemOperand(MachinePointerInfo(Ptr), Flags, Size, |
| Alignment, AAInfo, Ranges); |
| } |
| |
| CmpInst::Predicate FastISel::optimizeCmpPredicate(const CmpInst *CI) const { |
| // If both operands are the same, then try to optimize or fold the cmp. |
| CmpInst::Predicate Predicate = CI->getPredicate(); |
| if (CI->getOperand(0) != CI->getOperand(1)) |
| return Predicate; |
| |
| switch (Predicate) { |
| default: llvm_unreachable("Invalid predicate!"); |
| case CmpInst::FCMP_FALSE: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::FCMP_OEQ: Predicate = CmpInst::FCMP_ORD; break; |
| case CmpInst::FCMP_OGT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::FCMP_OGE: Predicate = CmpInst::FCMP_ORD; break; |
| case CmpInst::FCMP_OLT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::FCMP_OLE: Predicate = CmpInst::FCMP_ORD; break; |
| case CmpInst::FCMP_ONE: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::FCMP_ORD: Predicate = CmpInst::FCMP_ORD; break; |
| case CmpInst::FCMP_UNO: Predicate = CmpInst::FCMP_UNO; break; |
| case CmpInst::FCMP_UEQ: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::FCMP_UGT: Predicate = CmpInst::FCMP_UNO; break; |
| case CmpInst::FCMP_UGE: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::FCMP_ULT: Predicate = CmpInst::FCMP_UNO; break; |
| case CmpInst::FCMP_ULE: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::FCMP_UNE: Predicate = CmpInst::FCMP_UNO; break; |
| case CmpInst::FCMP_TRUE: Predicate = CmpInst::FCMP_TRUE; break; |
| |
| case CmpInst::ICMP_EQ: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::ICMP_NE: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::ICMP_UGT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::ICMP_UGE: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::ICMP_ULT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::ICMP_ULE: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::ICMP_SGT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::ICMP_SGE: Predicate = CmpInst::FCMP_TRUE; break; |
| case CmpInst::ICMP_SLT: Predicate = CmpInst::FCMP_FALSE; break; |
| case CmpInst::ICMP_SLE: Predicate = CmpInst::FCMP_TRUE; break; |
| } |
| |
| return Predicate; |
| } |