| // Copyright (c) 2018 The Khronos Group Inc. |
| // Copyright (c) 2018 Valve Corporation |
| // Copyright (c) 2018 LunarG Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "source/opt/dead_insert_elim_pass.h" |
| |
| #include "source/opt/composite.h" |
| #include "source/opt/ir_context.h" |
| #include "source/opt/iterator.h" |
| #include "spirv/1.2/GLSL.std.450.h" |
| |
| namespace spvtools { |
| namespace opt { |
| |
| namespace { |
| |
| const uint32_t kTypeVectorCountInIdx = 1; |
| const uint32_t kTypeMatrixCountInIdx = 1; |
| const uint32_t kTypeArrayLengthIdInIdx = 1; |
| const uint32_t kTypeIntWidthInIdx = 0; |
| const uint32_t kConstantValueInIdx = 0; |
| const uint32_t kInsertObjectIdInIdx = 0; |
| const uint32_t kInsertCompositeIdInIdx = 1; |
| |
| } // anonymous namespace |
| |
| uint32_t DeadInsertElimPass::NumComponents(Instruction* typeInst) { |
| switch (typeInst->opcode()) { |
| case SpvOpTypeVector: { |
| return typeInst->GetSingleWordInOperand(kTypeVectorCountInIdx); |
| } break; |
| case SpvOpTypeMatrix: { |
| return typeInst->GetSingleWordInOperand(kTypeMatrixCountInIdx); |
| } break; |
| case SpvOpTypeArray: { |
| uint32_t lenId = |
| typeInst->GetSingleWordInOperand(kTypeArrayLengthIdInIdx); |
| Instruction* lenInst = get_def_use_mgr()->GetDef(lenId); |
| if (lenInst->opcode() != SpvOpConstant) return 0; |
| uint32_t lenTypeId = lenInst->type_id(); |
| Instruction* lenTypeInst = get_def_use_mgr()->GetDef(lenTypeId); |
| // TODO(greg-lunarg): Support non-32-bit array length |
| if (lenTypeInst->GetSingleWordInOperand(kTypeIntWidthInIdx) != 32) |
| return 0; |
| return lenInst->GetSingleWordInOperand(kConstantValueInIdx); |
| } break; |
| case SpvOpTypeStruct: { |
| return typeInst->NumInOperands(); |
| } break; |
| default: { return 0; } break; |
| } |
| } |
| |
| void DeadInsertElimPass::MarkInsertChain( |
| Instruction* insertChain, std::vector<uint32_t>* pExtIndices, |
| uint32_t extOffset, std::unordered_set<uint32_t>* visited_phis) { |
| // Not currently optimizing array inserts. |
| Instruction* typeInst = get_def_use_mgr()->GetDef(insertChain->type_id()); |
| if (typeInst->opcode() == SpvOpTypeArray) return; |
| // Insert chains are only composed of inserts and phis |
| if (insertChain->opcode() != SpvOpCompositeInsert && |
| insertChain->opcode() != SpvOpPhi) |
| return; |
| // If extract indices are empty, mark all subcomponents if type |
| // is constant length. |
| if (pExtIndices == nullptr) { |
| uint32_t cnum = NumComponents(typeInst); |
| if (cnum > 0) { |
| std::vector<uint32_t> extIndices; |
| for (uint32_t i = 0; i < cnum; i++) { |
| extIndices.clear(); |
| extIndices.push_back(i); |
| std::unordered_set<uint32_t> sub_visited_phis; |
| MarkInsertChain(insertChain, &extIndices, 0, &sub_visited_phis); |
| } |
| return; |
| } |
| } |
| Instruction* insInst = insertChain; |
| while (insInst->opcode() == SpvOpCompositeInsert) { |
| // If no extract indices, mark insert and inserted object (which might |
| // also be an insert chain) and continue up the chain though the input |
| // composite. |
| // |
| // Note: We mark inserted objects in this function (rather than in |
| // EliminateDeadInsertsOnePass) because in some cases, we can do it |
| // more accurately here. |
| if (pExtIndices == nullptr) { |
| liveInserts_.insert(insInst->result_id()); |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); |
| std::unordered_set<uint32_t> obj_visited_phis; |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, |
| &obj_visited_phis); |
| // If extract indices match insert, we are done. Mark insert and |
| // inserted object. |
| } else if (ExtInsMatch(*pExtIndices, insInst, extOffset)) { |
| liveInserts_.insert(insInst->result_id()); |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); |
| std::unordered_set<uint32_t> obj_visited_phis; |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, |
| &obj_visited_phis); |
| break; |
| // If non-matching intersection, mark insert |
| } else if (ExtInsConflict(*pExtIndices, insInst, extOffset)) { |
| liveInserts_.insert(insInst->result_id()); |
| // If more extract indices than insert, we are done. Use remaining |
| // extract indices to mark inserted object. |
| uint32_t numInsertIndices = insInst->NumInOperands() - 2; |
| if (pExtIndices->size() - extOffset > numInsertIndices) { |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); |
| std::unordered_set<uint32_t> obj_visited_phis; |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), pExtIndices, |
| extOffset + numInsertIndices, &obj_visited_phis); |
| break; |
| // If fewer extract indices than insert, also mark inserted object and |
| // continue up chain. |
| } else { |
| uint32_t objId = insInst->GetSingleWordInOperand(kInsertObjectIdInIdx); |
| std::unordered_set<uint32_t> obj_visited_phis; |
| MarkInsertChain(get_def_use_mgr()->GetDef(objId), nullptr, 0, |
| &obj_visited_phis); |
| } |
| } |
| // Get next insert in chain |
| const uint32_t compId = |
| insInst->GetSingleWordInOperand(kInsertCompositeIdInIdx); |
| insInst = get_def_use_mgr()->GetDef(compId); |
| } |
| // If insert chain ended with phi, do recursive call on each operand |
| if (insInst->opcode() != SpvOpPhi) return; |
| // Mark phi visited to prevent potential infinite loop. If phi is already |
| // visited, return to avoid infinite loop. |
| if (visited_phis->count(insInst->result_id()) != 0) return; |
| visited_phis->insert(insInst->result_id()); |
| |
| // Phis may have duplicate inputs values for different edges, prune incoming |
| // ids lists before recursing. |
| std::vector<uint32_t> ids; |
| for (uint32_t i = 0; i < insInst->NumInOperands(); i += 2) { |
| ids.push_back(insInst->GetSingleWordInOperand(i)); |
| } |
| std::sort(ids.begin(), ids.end()); |
| auto new_end = std::unique(ids.begin(), ids.end()); |
| for (auto id_iter = ids.begin(); id_iter != new_end; ++id_iter) { |
| Instruction* pi = get_def_use_mgr()->GetDef(*id_iter); |
| MarkInsertChain(pi, pExtIndices, extOffset, visited_phis); |
| } |
| } |
| |
| bool DeadInsertElimPass::EliminateDeadInserts(Function* func) { |
| bool modified = false; |
| bool lastmodified = true; |
| // Each pass can delete dead instructions, thus potentially revealing |
| // new dead insertions ie insertions with no uses. |
| while (lastmodified) { |
| lastmodified = EliminateDeadInsertsOnePass(func); |
| modified |= lastmodified; |
| } |
| return modified; |
| } |
| |
| bool DeadInsertElimPass::EliminateDeadInsertsOnePass(Function* func) { |
| bool modified = false; |
| liveInserts_.clear(); |
| visitedPhis_.clear(); |
| // Mark all live inserts |
| for (auto bi = func->begin(); bi != func->end(); ++bi) { |
| for (auto ii = bi->begin(); ii != bi->end(); ++ii) { |
| // Only process Inserts and composite Phis |
| SpvOp op = ii->opcode(); |
| Instruction* typeInst = get_def_use_mgr()->GetDef(ii->type_id()); |
| if (op != SpvOpCompositeInsert && |
| (op != SpvOpPhi || !spvOpcodeIsComposite(typeInst->opcode()))) |
| continue; |
| // The marking algorithm can be expensive for large arrays and the |
| // efficacy of eliminating dead inserts into arrays is questionable. |
| // Skip optimizing array inserts for now. Just mark them live. |
| // TODO(greg-lunarg): Eliminate dead array inserts |
| if (op == SpvOpCompositeInsert) { |
| if (typeInst->opcode() == SpvOpTypeArray) { |
| liveInserts_.insert(ii->result_id()); |
| continue; |
| } |
| } |
| const uint32_t id = ii->result_id(); |
| get_def_use_mgr()->ForEachUser(id, [&ii, this](Instruction* user) { |
| if (user->IsCommonDebugInstr()) return; |
| switch (user->opcode()) { |
| case SpvOpCompositeInsert: |
| case SpvOpPhi: |
| // Use by insert or phi does not initiate marking |
| break; |
| case SpvOpCompositeExtract: { |
| // Capture extract indices |
| std::vector<uint32_t> extIndices; |
| uint32_t icnt = 0; |
| user->ForEachInOperand([&icnt, &extIndices](const uint32_t* idp) { |
| if (icnt > 0) extIndices.push_back(*idp); |
| ++icnt; |
| }); |
| // Mark all inserts in chain that intersect with extract |
| std::unordered_set<uint32_t> visited_phis; |
| MarkInsertChain(&*ii, &extIndices, 0, &visited_phis); |
| } break; |
| default: { |
| // Mark inserts in chain for all components |
| MarkInsertChain(&*ii, nullptr, 0, nullptr); |
| } break; |
| } |
| }); |
| } |
| } |
| // Find and disconnect dead inserts |
| std::vector<Instruction*> dead_instructions; |
| for (auto bi = func->begin(); bi != func->end(); ++bi) { |
| for (auto ii = bi->begin(); ii != bi->end(); ++ii) { |
| if (ii->opcode() != SpvOpCompositeInsert) continue; |
| const uint32_t id = ii->result_id(); |
| if (liveInserts_.find(id) != liveInserts_.end()) continue; |
| const uint32_t replId = |
| ii->GetSingleWordInOperand(kInsertCompositeIdInIdx); |
| (void)context()->ReplaceAllUsesWith(id, replId); |
| dead_instructions.push_back(&*ii); |
| modified = true; |
| } |
| } |
| // DCE dead inserts |
| while (!dead_instructions.empty()) { |
| Instruction* inst = dead_instructions.back(); |
| dead_instructions.pop_back(); |
| DCEInst(inst, [&dead_instructions](Instruction* other_inst) { |
| auto i = std::find(dead_instructions.begin(), dead_instructions.end(), |
| other_inst); |
| if (i != dead_instructions.end()) { |
| dead_instructions.erase(i); |
| } |
| }); |
| } |
| return modified; |
| } |
| |
| Pass::Status DeadInsertElimPass::Process() { |
| // Process all entry point functions. |
| ProcessFunction pfn = [this](Function* fp) { |
| return EliminateDeadInserts(fp); |
| }; |
| bool modified = context()->ProcessReachableCallTree(pfn); |
| return modified ? Status::SuccessWithChange : Status::SuccessWithoutChange; |
| } |
| |
| } // namespace opt |
| } // namespace spvtools |