| //===-- llvm-objdump.cpp - Object file dumping utility for llvm -----------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This program is a utility that works like binutils "objdump", that is, it | |
| // dumps out a plethora of information about an object file depending on the | |
| // flags. | |
| // | |
| // The flags and output of this program should be near identical to those of | |
| // binutils objdump. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm-objdump.h" | |
| #include "llvm/ADT/Optional.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/StringExtras.h" | |
| #include "llvm/ADT/StringSet.h" | |
| #include "llvm/ADT/Triple.h" | |
| #include "llvm/CodeGen/FaultMaps.h" | |
| #include "llvm/DebugInfo/DWARF/DWARFContext.h" | |
| #include "llvm/DebugInfo/Symbolize/Symbolize.h" | |
| #include "llvm/Demangle/Demangle.h" | |
| #include "llvm/MC/MCAsmInfo.h" | |
| #include "llvm/MC/MCContext.h" | |
| #include "llvm/MC/MCDisassembler/MCDisassembler.h" | |
| #include "llvm/MC/MCDisassembler/MCRelocationInfo.h" | |
| #include "llvm/MC/MCInst.h" | |
| #include "llvm/MC/MCInstPrinter.h" | |
| #include "llvm/MC/MCInstrAnalysis.h" | |
| #include "llvm/MC/MCInstrInfo.h" | |
| #include "llvm/MC/MCObjectFileInfo.h" | |
| #include "llvm/MC/MCRegisterInfo.h" | |
| #include "llvm/MC/MCSubtargetInfo.h" | |
| #include "llvm/Object/Archive.h" | |
| #include "llvm/Object/COFF.h" | |
| #include "llvm/Object/COFFImportFile.h" | |
| #include "llvm/Object/ELFObjectFile.h" | |
| #include "llvm/Object/MachO.h" | |
| #include "llvm/Object/ObjectFile.h" | |
| #include "llvm/Object/Wasm.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/Errc.h" | |
| #include "llvm/Support/FileSystem.h" | |
| #include "llvm/Support/Format.h" | |
| #include "llvm/Support/GraphWriter.h" | |
| #include "llvm/Support/Host.h" | |
| #include "llvm/Support/InitLLVM.h" | |
| #include "llvm/Support/MemoryBuffer.h" | |
| #include "llvm/Support/SourceMgr.h" | |
| #include "llvm/Support/TargetRegistry.h" | |
| #include "llvm/Support/TargetSelect.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <cctype> | |
| #include <cstring> | |
| #include <system_error> | |
| #include <unordered_map> | |
| #include <utility> | |
| using namespace llvm; | |
| using namespace object; | |
| cl::opt<bool> | |
| llvm::AllHeaders("all-headers", | |
| cl::desc("Display all available header information")); | |
| static cl::alias AllHeadersShort("x", cl::desc("Alias for --all-headers"), | |
| cl::aliasopt(AllHeaders)); | |
| static cl::list<std::string> | |
| InputFilenames(cl::Positional, cl::desc("<input object files>"),cl::ZeroOrMore); | |
| cl::opt<bool> | |
| llvm::Disassemble("disassemble", | |
| cl::desc("Display assembler mnemonics for the machine instructions")); | |
| static cl::alias | |
| Disassembled("d", cl::desc("Alias for --disassemble"), | |
| cl::aliasopt(Disassemble)); | |
| cl::opt<bool> | |
| llvm::DisassembleAll("disassemble-all", | |
| cl::desc("Display assembler mnemonics for the machine instructions")); | |
| static cl::alias | |
| DisassembleAlld("D", cl::desc("Alias for --disassemble-all"), | |
| cl::aliasopt(DisassembleAll)); | |
| cl::opt<std::string> llvm::Demangle("demangle", | |
| cl::desc("Demangle symbols names"), | |
| cl::ValueOptional, cl::init("none")); | |
| static cl::alias DemangleShort("C", cl::desc("Alias for --demangle"), | |
| cl::aliasopt(Demangle)); | |
| static cl::list<std::string> | |
| DisassembleFunctions("df", | |
| cl::CommaSeparated, | |
| cl::desc("List of functions to disassemble")); | |
| static StringSet<> DisasmFuncsSet; | |
| cl::opt<bool> | |
| llvm::Relocations("r", cl::desc("Display the relocation entries in the file")); | |
| cl::opt<bool> | |
| llvm::DynamicRelocations("dynamic-reloc", | |
| cl::desc("Display the dynamic relocation entries in the file")); | |
| static cl::alias | |
| DynamicRelocationsd("R", cl::desc("Alias for --dynamic-reloc"), | |
| cl::aliasopt(DynamicRelocations)); | |
| cl::opt<bool> | |
| llvm::SectionContents("s", cl::desc("Display the content of each section")); | |
| cl::opt<bool> | |
| llvm::SymbolTable("t", cl::desc("Display the symbol table")); | |
| cl::opt<bool> | |
| llvm::ExportsTrie("exports-trie", cl::desc("Display mach-o exported symbols")); | |
| cl::opt<bool> | |
| llvm::Rebase("rebase", cl::desc("Display mach-o rebasing info")); | |
| cl::opt<bool> | |
| llvm::Bind("bind", cl::desc("Display mach-o binding info")); | |
| cl::opt<bool> | |
| llvm::LazyBind("lazy-bind", cl::desc("Display mach-o lazy binding info")); | |
| cl::opt<bool> | |
| llvm::WeakBind("weak-bind", cl::desc("Display mach-o weak binding info")); | |
| cl::opt<bool> | |
| llvm::RawClangAST("raw-clang-ast", | |
| cl::desc("Dump the raw binary contents of the clang AST section")); | |
| static cl::opt<bool> | |
| MachOOpt("macho", cl::desc("Use MachO specific object file parser")); | |
| static cl::alias | |
| MachOm("m", cl::desc("Alias for --macho"), cl::aliasopt(MachOOpt)); | |
| cl::opt<std::string> | |
| llvm::TripleName("triple", cl::desc("Target triple to disassemble for, " | |
| "see -version for available targets")); | |
| cl::opt<std::string> | |
| llvm::MCPU("mcpu", | |
| cl::desc("Target a specific cpu type (-mcpu=help for details)"), | |
| cl::value_desc("cpu-name"), | |
| cl::init("")); | |
| cl::opt<std::string> | |
| llvm::ArchName("arch-name", cl::desc("Target arch to disassemble for, " | |
| "see -version for available targets")); | |
| cl::opt<bool> | |
| llvm::SectionHeaders("section-headers", cl::desc("Display summaries of the " | |
| "headers for each section.")); | |
| static cl::alias | |
| SectionHeadersShort("headers", cl::desc("Alias for --section-headers"), | |
| cl::aliasopt(SectionHeaders)); | |
| static cl::alias | |
| SectionHeadersShorter("h", cl::desc("Alias for --section-headers"), | |
| cl::aliasopt(SectionHeaders)); | |
| cl::list<std::string> | |
| llvm::FilterSections("section", cl::desc("Operate on the specified sections only. " | |
| "With -macho dump segment,section")); | |
| cl::alias | |
| static FilterSectionsj("j", cl::desc("Alias for --section"), | |
| cl::aliasopt(llvm::FilterSections)); | |
| cl::list<std::string> | |
| llvm::MAttrs("mattr", | |
| cl::CommaSeparated, | |
| cl::desc("Target specific attributes"), | |
| cl::value_desc("a1,+a2,-a3,...")); | |
| cl::opt<bool> | |
| llvm::NoShowRawInsn("no-show-raw-insn", cl::desc("When disassembling " | |
| "instructions, do not print " | |
| "the instruction bytes.")); | |
| cl::opt<bool> | |
| llvm::NoLeadingAddr("no-leading-addr", cl::desc("Print no leading address")); | |
| cl::opt<bool> | |
| llvm::UnwindInfo("unwind-info", cl::desc("Display unwind information")); | |
| static cl::alias | |
| UnwindInfoShort("u", cl::desc("Alias for --unwind-info"), | |
| cl::aliasopt(UnwindInfo)); | |
| cl::opt<bool> | |
| llvm::PrivateHeaders("private-headers", | |
| cl::desc("Display format specific file headers")); | |
| cl::opt<bool> | |
| llvm::FirstPrivateHeader("private-header", | |
| cl::desc("Display only the first format specific file " | |
| "header")); | |
| static cl::alias | |
| PrivateHeadersShort("p", cl::desc("Alias for --private-headers"), | |
| cl::aliasopt(PrivateHeaders)); | |
| cl::opt<bool> llvm::FileHeaders( | |
| "file-headers", | |
| cl::desc("Display the contents of the overall file header")); | |
| static cl::alias FileHeadersShort("f", cl::desc("Alias for --file-headers"), | |
| cl::aliasopt(FileHeaders)); | |
| cl::opt<bool> | |
| llvm::ArchiveHeaders("archive-headers", | |
| cl::desc("Display archive header information")); | |
| cl::alias | |
| ArchiveHeadersShort("a", cl::desc("Alias for --archive-headers"), | |
| cl::aliasopt(ArchiveHeaders)); | |
| cl::opt<bool> | |
| llvm::PrintImmHex("print-imm-hex", | |
| cl::desc("Use hex format for immediate values")); | |
| cl::opt<bool> PrintFaultMaps("fault-map-section", | |
| cl::desc("Display contents of faultmap section")); | |
| cl::opt<DIDumpType> llvm::DwarfDumpType( | |
| "dwarf", cl::init(DIDT_Null), cl::desc("Dump of dwarf debug sections:"), | |
| cl::values(clEnumValN(DIDT_DebugFrame, "frames", ".debug_frame"))); | |
| cl::opt<bool> PrintSource( | |
| "source", | |
| cl::desc( | |
| "Display source inlined with disassembly. Implies disassemble object")); | |
| cl::alias PrintSourceShort("S", cl::desc("Alias for -source"), | |
| cl::aliasopt(PrintSource)); | |
| cl::opt<bool> PrintLines("line-numbers", | |
| cl::desc("Display source line numbers with " | |
| "disassembly. Implies disassemble object")); | |
| cl::alias PrintLinesShort("l", cl::desc("Alias for -line-numbers"), | |
| cl::aliasopt(PrintLines)); | |
| cl::opt<unsigned long long> | |
| StartAddress("start-address", cl::desc("Disassemble beginning at address"), | |
| cl::value_desc("address"), cl::init(0)); | |
| cl::opt<unsigned long long> | |
| StopAddress("stop-address", cl::desc("Stop disassembly at address"), | |
| cl::value_desc("address"), cl::init(UINT64_MAX)); | |
| static StringRef ToolName; | |
| typedef std::vector<std::tuple<uint64_t, StringRef, uint8_t>> SectionSymbolsTy; | |
| namespace { | |
| typedef std::function<bool(llvm::object::SectionRef const &)> FilterPredicate; | |
| class SectionFilterIterator { | |
| public: | |
| SectionFilterIterator(FilterPredicate P, | |
| llvm::object::section_iterator const &I, | |
| llvm::object::section_iterator const &E) | |
| : Predicate(std::move(P)), Iterator(I), End(E) { | |
| ScanPredicate(); | |
| } | |
| const llvm::object::SectionRef &operator*() const { return *Iterator; } | |
| SectionFilterIterator &operator++() { | |
| ++Iterator; | |
| ScanPredicate(); | |
| return *this; | |
| } | |
| bool operator!=(SectionFilterIterator const &Other) const { | |
| return Iterator != Other.Iterator; | |
| } | |
| private: | |
| void ScanPredicate() { | |
| while (Iterator != End && !Predicate(*Iterator)) { | |
| ++Iterator; | |
| } | |
| } | |
| FilterPredicate Predicate; | |
| llvm::object::section_iterator Iterator; | |
| llvm::object::section_iterator End; | |
| }; | |
| class SectionFilter { | |
| public: | |
| SectionFilter(FilterPredicate P, llvm::object::ObjectFile const &O) | |
| : Predicate(std::move(P)), Object(O) {} | |
| SectionFilterIterator begin() { | |
| return SectionFilterIterator(Predicate, Object.section_begin(), | |
| Object.section_end()); | |
| } | |
| SectionFilterIterator end() { | |
| return SectionFilterIterator(Predicate, Object.section_end(), | |
| Object.section_end()); | |
| } | |
| private: | |
| FilterPredicate Predicate; | |
| llvm::object::ObjectFile const &Object; | |
| }; | |
| SectionFilter ToolSectionFilter(llvm::object::ObjectFile const &O) { | |
| return SectionFilter( | |
| [](llvm::object::SectionRef const &S) { | |
| if (FilterSections.empty()) | |
| return true; | |
| llvm::StringRef String; | |
| std::error_code error = S.getName(String); | |
| if (error) | |
| return false; | |
| return is_contained(FilterSections, String); | |
| }, | |
| O); | |
| } | |
| } | |
| void llvm::error(std::error_code EC) { | |
| if (!EC) | |
| return; | |
| errs() << ToolName << ": error reading file: " << EC.message() << ".\n"; | |
| errs().flush(); | |
| exit(1); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::error(Twine Message) { | |
| errs() << ToolName << ": " << Message << ".\n"; | |
| errs().flush(); | |
| exit(1); | |
| } | |
| void llvm::warn(StringRef Message) { | |
| errs() << ToolName << ": warning: " << Message << ".\n"; | |
| errs().flush(); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::report_error(StringRef File, | |
| Twine Message) { | |
| errs() << ToolName << ": '" << File << "': " << Message << ".\n"; | |
| exit(1); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::report_error(StringRef File, | |
| std::error_code EC) { | |
| assert(EC); | |
| errs() << ToolName << ": '" << File << "': " << EC.message() << ".\n"; | |
| exit(1); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::report_error(StringRef File, | |
| llvm::Error E) { | |
| assert(E); | |
| std::string Buf; | |
| raw_string_ostream OS(Buf); | |
| logAllUnhandledErrors(std::move(E), OS, ""); | |
| OS.flush(); | |
| errs() << ToolName << ": '" << File << "': " << Buf; | |
| exit(1); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::report_error(StringRef ArchiveName, | |
| StringRef FileName, | |
| llvm::Error E, | |
| StringRef ArchitectureName) { | |
| assert(E); | |
| errs() << ToolName << ": "; | |
| if (ArchiveName != "") | |
| errs() << ArchiveName << "(" << FileName << ")"; | |
| else | |
| errs() << "'" << FileName << "'"; | |
| if (!ArchitectureName.empty()) | |
| errs() << " (for architecture " << ArchitectureName << ")"; | |
| std::string Buf; | |
| raw_string_ostream OS(Buf); | |
| logAllUnhandledErrors(std::move(E), OS, ""); | |
| OS.flush(); | |
| errs() << ": " << Buf; | |
| exit(1); | |
| } | |
| LLVM_ATTRIBUTE_NORETURN void llvm::report_error(StringRef ArchiveName, | |
| const object::Archive::Child &C, | |
| llvm::Error E, | |
| StringRef ArchitectureName) { | |
| Expected<StringRef> NameOrErr = C.getName(); | |
| // TODO: if we have a error getting the name then it would be nice to print | |
| // the index of which archive member this is and or its offset in the | |
| // archive instead of "???" as the name. | |
| if (!NameOrErr) { | |
| consumeError(NameOrErr.takeError()); | |
| llvm::report_error(ArchiveName, "???", std::move(E), ArchitectureName); | |
| } else | |
| llvm::report_error(ArchiveName, NameOrErr.get(), std::move(E), | |
| ArchitectureName); | |
| } | |
| static const Target *getTarget(const ObjectFile *Obj = nullptr) { | |
| // Figure out the target triple. | |
| llvm::Triple TheTriple("unknown-unknown-unknown"); | |
| if (TripleName.empty()) { | |
| if (Obj) { | |
| TheTriple = Obj->makeTriple(); | |
| } | |
| } else { | |
| TheTriple.setTriple(Triple::normalize(TripleName)); | |
| // Use the triple, but also try to combine with ARM build attributes. | |
| if (Obj) { | |
| auto Arch = Obj->getArch(); | |
| if (Arch == Triple::arm || Arch == Triple::armeb) { | |
| Obj->setARMSubArch(TheTriple); | |
| } | |
| } | |
| } | |
| // Get the target specific parser. | |
| std::string Error; | |
| const Target *TheTarget = TargetRegistry::lookupTarget(ArchName, TheTriple, | |
| Error); | |
| if (!TheTarget) { | |
| if (Obj) | |
| report_error(Obj->getFileName(), "can't find target: " + Error); | |
| else | |
| error("can't find target: " + Error); | |
| } | |
| // Update the triple name and return the found target. | |
| TripleName = TheTriple.getTriple(); | |
| return TheTarget; | |
| } | |
| bool llvm::RelocAddressLess(RelocationRef a, RelocationRef b) { | |
| return a.getOffset() < b.getOffset(); | |
| } | |
| template <class ELFT> | |
| static std::error_code getRelocationValueString(const ELFObjectFile<ELFT> *Obj, | |
| const RelocationRef &RelRef, | |
| SmallVectorImpl<char> &Result) { | |
| DataRefImpl Rel = RelRef.getRawDataRefImpl(); | |
| typedef typename ELFObjectFile<ELFT>::Elf_Sym Elf_Sym; | |
| typedef typename ELFObjectFile<ELFT>::Elf_Shdr Elf_Shdr; | |
| typedef typename ELFObjectFile<ELFT>::Elf_Rela Elf_Rela; | |
| const ELFFile<ELFT> &EF = *Obj->getELFFile(); | |
| auto SecOrErr = EF.getSection(Rel.d.a); | |
| if (!SecOrErr) | |
| return errorToErrorCode(SecOrErr.takeError()); | |
| const Elf_Shdr *Sec = *SecOrErr; | |
| auto SymTabOrErr = EF.getSection(Sec->sh_link); | |
| if (!SymTabOrErr) | |
| return errorToErrorCode(SymTabOrErr.takeError()); | |
| const Elf_Shdr *SymTab = *SymTabOrErr; | |
| assert(SymTab->sh_type == ELF::SHT_SYMTAB || | |
| SymTab->sh_type == ELF::SHT_DYNSYM); | |
| auto StrTabSec = EF.getSection(SymTab->sh_link); | |
| if (!StrTabSec) | |
| return errorToErrorCode(StrTabSec.takeError()); | |
| auto StrTabOrErr = EF.getStringTable(*StrTabSec); | |
| if (!StrTabOrErr) | |
| return errorToErrorCode(StrTabOrErr.takeError()); | |
| StringRef StrTab = *StrTabOrErr; | |
| int64_t addend = 0; | |
| // If there is no Symbol associated with the relocation, we set the undef | |
| // boolean value to 'true'. This will prevent us from calling functions that | |
| // requires the relocation to be associated with a symbol. | |
| bool undef = false; | |
| switch (Sec->sh_type) { | |
| default: | |
| return object_error::parse_failed; | |
| case ELF::SHT_REL: { | |
| // TODO: Read implicit addend from section data. | |
| break; | |
| } | |
| case ELF::SHT_RELA: { | |
| const Elf_Rela *ERela = Obj->getRela(Rel); | |
| addend = ERela->r_addend; | |
| undef = ERela->getSymbol(false) == 0; | |
| break; | |
| } | |
| } | |
| StringRef Target; | |
| if (!undef) { | |
| symbol_iterator SI = RelRef.getSymbol(); | |
| const Elf_Sym *symb = Obj->getSymbol(SI->getRawDataRefImpl()); | |
| if (symb->getType() == ELF::STT_SECTION) { | |
| Expected<section_iterator> SymSI = SI->getSection(); | |
| if (!SymSI) | |
| return errorToErrorCode(SymSI.takeError()); | |
| const Elf_Shdr *SymSec = Obj->getSection((*SymSI)->getRawDataRefImpl()); | |
| auto SecName = EF.getSectionName(SymSec); | |
| if (!SecName) | |
| return errorToErrorCode(SecName.takeError()); | |
| Target = *SecName; | |
| } else { | |
| Expected<StringRef> SymName = symb->getName(StrTab); | |
| if (!SymName) | |
| return errorToErrorCode(SymName.takeError()); | |
| Target = *SymName; | |
| } | |
| } else | |
| Target = "*ABS*"; | |
| // Default scheme is to print Target, as well as "+ <addend>" for nonzero | |
| // addend. Should be acceptable for all normal purposes. | |
| std::string fmtbuf; | |
| raw_string_ostream fmt(fmtbuf); | |
| fmt << Target; | |
| if (addend != 0) | |
| fmt << (addend < 0 ? "" : "+") << addend; | |
| fmt.flush(); | |
| Result.append(fmtbuf.begin(), fmtbuf.end()); | |
| return std::error_code(); | |
| } | |
| static std::error_code getRelocationValueString(const ELFObjectFileBase *Obj, | |
| const RelocationRef &Rel, | |
| SmallVectorImpl<char> &Result) { | |
| if (auto *ELF32LE = dyn_cast<ELF32LEObjectFile>(Obj)) | |
| return getRelocationValueString(ELF32LE, Rel, Result); | |
| if (auto *ELF64LE = dyn_cast<ELF64LEObjectFile>(Obj)) | |
| return getRelocationValueString(ELF64LE, Rel, Result); | |
| if (auto *ELF32BE = dyn_cast<ELF32BEObjectFile>(Obj)) | |
| return getRelocationValueString(ELF32BE, Rel, Result); | |
| auto *ELF64BE = cast<ELF64BEObjectFile>(Obj); | |
| return getRelocationValueString(ELF64BE, Rel, Result); | |
| } | |
| static std::error_code getRelocationValueString(const COFFObjectFile *Obj, | |
| const RelocationRef &Rel, | |
| SmallVectorImpl<char> &Result) { | |
| symbol_iterator SymI = Rel.getSymbol(); | |
| Expected<StringRef> SymNameOrErr = SymI->getName(); | |
| if (!SymNameOrErr) | |
| return errorToErrorCode(SymNameOrErr.takeError()); | |
| StringRef SymName = *SymNameOrErr; | |
| Result.append(SymName.begin(), SymName.end()); | |
| return std::error_code(); | |
| } | |
| static void printRelocationTargetName(const MachOObjectFile *O, | |
| const MachO::any_relocation_info &RE, | |
| raw_string_ostream &fmt) { | |
| bool IsScattered = O->isRelocationScattered(RE); | |
| // Target of a scattered relocation is an address. In the interest of | |
| // generating pretty output, scan through the symbol table looking for a | |
| // symbol that aligns with that address. If we find one, print it. | |
| // Otherwise, we just print the hex address of the target. | |
| if (IsScattered) { | |
| uint32_t Val = O->getPlainRelocationSymbolNum(RE); | |
| for (const SymbolRef &Symbol : O->symbols()) { | |
| std::error_code ec; | |
| Expected<uint64_t> Addr = Symbol.getAddress(); | |
| if (!Addr) | |
| report_error(O->getFileName(), Addr.takeError()); | |
| if (*Addr != Val) | |
| continue; | |
| Expected<StringRef> Name = Symbol.getName(); | |
| if (!Name) | |
| report_error(O->getFileName(), Name.takeError()); | |
| fmt << *Name; | |
| return; | |
| } | |
| // If we couldn't find a symbol that this relocation refers to, try | |
| // to find a section beginning instead. | |
| for (const SectionRef &Section : ToolSectionFilter(*O)) { | |
| std::error_code ec; | |
| StringRef Name; | |
| uint64_t Addr = Section.getAddress(); | |
| if (Addr != Val) | |
| continue; | |
| if ((ec = Section.getName(Name))) | |
| report_error(O->getFileName(), ec); | |
| fmt << Name; | |
| return; | |
| } | |
| fmt << format("0x%x", Val); | |
| return; | |
| } | |
| StringRef S; | |
| bool isExtern = O->getPlainRelocationExternal(RE); | |
| uint64_t Val = O->getPlainRelocationSymbolNum(RE); | |
| if (O->getAnyRelocationType(RE) == MachO::ARM64_RELOC_ADDEND) { | |
| fmt << format("0x%0" PRIx64, Val); | |
| return; | |
| } else if (isExtern) { | |
| symbol_iterator SI = O->symbol_begin(); | |
| advance(SI, Val); | |
| Expected<StringRef> SOrErr = SI->getName(); | |
| if (!SOrErr) | |
| report_error(O->getFileName(), SOrErr.takeError()); | |
| S = *SOrErr; | |
| } else { | |
| section_iterator SI = O->section_begin(); | |
| // Adjust for the fact that sections are 1-indexed. | |
| if (Val == 0) { | |
| fmt << "0 (?,?)"; | |
| return; | |
| } | |
| uint32_t i = Val - 1; | |
| while (i != 0 && SI != O->section_end()) { | |
| i--; | |
| advance(SI, 1); | |
| } | |
| if (SI == O->section_end()) | |
| fmt << Val << " (?,?)"; | |
| else | |
| SI->getName(S); | |
| } | |
| fmt << S; | |
| } | |
| static std::error_code getRelocationValueString(const WasmObjectFile *Obj, | |
| const RelocationRef &RelRef, | |
| SmallVectorImpl<char> &Result) { | |
| const wasm::WasmRelocation& Rel = Obj->getWasmRelocation(RelRef); | |
| symbol_iterator SI = RelRef.getSymbol(); | |
| std::string fmtbuf; | |
| raw_string_ostream fmt(fmtbuf); | |
| if (SI == Obj->symbol_end()) { | |
| // Not all wasm relocations have symbols associated with them. | |
| // In particular R_WEBASSEMBLY_TYPE_INDEX_LEB. | |
| fmt << Rel.Index; | |
| } else { | |
| Expected<StringRef> SymNameOrErr = SI->getName(); | |
| if (!SymNameOrErr) | |
| return errorToErrorCode(SymNameOrErr.takeError()); | |
| StringRef SymName = *SymNameOrErr; | |
| Result.append(SymName.begin(), SymName.end()); | |
| } | |
| fmt << (Rel.Addend < 0 ? "" : "+") << Rel.Addend; | |
| fmt.flush(); | |
| Result.append(fmtbuf.begin(), fmtbuf.end()); | |
| return std::error_code(); | |
| } | |
| static std::error_code getRelocationValueString(const MachOObjectFile *Obj, | |
| const RelocationRef &RelRef, | |
| SmallVectorImpl<char> &Result) { | |
| DataRefImpl Rel = RelRef.getRawDataRefImpl(); | |
| MachO::any_relocation_info RE = Obj->getRelocation(Rel); | |
| unsigned Arch = Obj->getArch(); | |
| std::string fmtbuf; | |
| raw_string_ostream fmt(fmtbuf); | |
| unsigned Type = Obj->getAnyRelocationType(RE); | |
| bool IsPCRel = Obj->getAnyRelocationPCRel(RE); | |
| // Determine any addends that should be displayed with the relocation. | |
| // These require decoding the relocation type, which is triple-specific. | |
| // X86_64 has entirely custom relocation types. | |
| if (Arch == Triple::x86_64) { | |
| bool isPCRel = Obj->getAnyRelocationPCRel(RE); | |
| switch (Type) { | |
| case MachO::X86_64_RELOC_GOT_LOAD: | |
| case MachO::X86_64_RELOC_GOT: { | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "@GOT"; | |
| if (isPCRel) | |
| fmt << "PCREL"; | |
| break; | |
| } | |
| case MachO::X86_64_RELOC_SUBTRACTOR: { | |
| DataRefImpl RelNext = Rel; | |
| Obj->moveRelocationNext(RelNext); | |
| MachO::any_relocation_info RENext = Obj->getRelocation(RelNext); | |
| // X86_64_RELOC_SUBTRACTOR must be followed by a relocation of type | |
| // X86_64_RELOC_UNSIGNED. | |
| // NOTE: Scattered relocations don't exist on x86_64. | |
| unsigned RType = Obj->getAnyRelocationType(RENext); | |
| if (RType != MachO::X86_64_RELOC_UNSIGNED) | |
| report_error(Obj->getFileName(), "Expected X86_64_RELOC_UNSIGNED after " | |
| "X86_64_RELOC_SUBTRACTOR."); | |
| // The X86_64_RELOC_UNSIGNED contains the minuend symbol; | |
| // X86_64_RELOC_SUBTRACTOR contains the subtrahend. | |
| printRelocationTargetName(Obj, RENext, fmt); | |
| fmt << "-"; | |
| printRelocationTargetName(Obj, RE, fmt); | |
| break; | |
| } | |
| case MachO::X86_64_RELOC_TLV: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "@TLV"; | |
| if (isPCRel) | |
| fmt << "P"; | |
| break; | |
| case MachO::X86_64_RELOC_SIGNED_1: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "-1"; | |
| break; | |
| case MachO::X86_64_RELOC_SIGNED_2: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "-2"; | |
| break; | |
| case MachO::X86_64_RELOC_SIGNED_4: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "-4"; | |
| break; | |
| default: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| break; | |
| } | |
| // X86 and ARM share some relocation types in common. | |
| } else if (Arch == Triple::x86 || Arch == Triple::arm || | |
| Arch == Triple::ppc) { | |
| // Generic relocation types... | |
| switch (Type) { | |
| case MachO::GENERIC_RELOC_PAIR: // prints no info | |
| return std::error_code(); | |
| case MachO::GENERIC_RELOC_SECTDIFF: { | |
| DataRefImpl RelNext = Rel; | |
| Obj->moveRelocationNext(RelNext); | |
| MachO::any_relocation_info RENext = Obj->getRelocation(RelNext); | |
| // X86 sect diff's must be followed by a relocation of type | |
| // GENERIC_RELOC_PAIR. | |
| unsigned RType = Obj->getAnyRelocationType(RENext); | |
| if (RType != MachO::GENERIC_RELOC_PAIR) | |
| report_error(Obj->getFileName(), "Expected GENERIC_RELOC_PAIR after " | |
| "GENERIC_RELOC_SECTDIFF."); | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "-"; | |
| printRelocationTargetName(Obj, RENext, fmt); | |
| break; | |
| } | |
| } | |
| if (Arch == Triple::x86 || Arch == Triple::ppc) { | |
| switch (Type) { | |
| case MachO::GENERIC_RELOC_LOCAL_SECTDIFF: { | |
| DataRefImpl RelNext = Rel; | |
| Obj->moveRelocationNext(RelNext); | |
| MachO::any_relocation_info RENext = Obj->getRelocation(RelNext); | |
| // X86 sect diff's must be followed by a relocation of type | |
| // GENERIC_RELOC_PAIR. | |
| unsigned RType = Obj->getAnyRelocationType(RENext); | |
| if (RType != MachO::GENERIC_RELOC_PAIR) | |
| report_error(Obj->getFileName(), "Expected GENERIC_RELOC_PAIR after " | |
| "GENERIC_RELOC_LOCAL_SECTDIFF."); | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "-"; | |
| printRelocationTargetName(Obj, RENext, fmt); | |
| break; | |
| } | |
| case MachO::GENERIC_RELOC_TLV: { | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt << "@TLV"; | |
| if (IsPCRel) | |
| fmt << "P"; | |
| break; | |
| } | |
| default: | |
| printRelocationTargetName(Obj, RE, fmt); | |
| } | |
| } else { // ARM-specific relocations | |
| switch (Type) { | |
| case MachO::ARM_RELOC_HALF: | |
| case MachO::ARM_RELOC_HALF_SECTDIFF: { | |
| // Half relocations steal a bit from the length field to encode | |
| // whether this is an upper16 or a lower16 relocation. | |
| bool isUpper = (Obj->getAnyRelocationLength(RE) & 0x1) == 1; | |
| if (isUpper) | |
| fmt << ":upper16:("; | |
| else | |
| fmt << ":lower16:("; | |
| printRelocationTargetName(Obj, RE, fmt); | |
| DataRefImpl RelNext = Rel; | |
| Obj->moveRelocationNext(RelNext); | |
| MachO::any_relocation_info RENext = Obj->getRelocation(RelNext); | |
| // ARM half relocs must be followed by a relocation of type | |
| // ARM_RELOC_PAIR. | |
| unsigned RType = Obj->getAnyRelocationType(RENext); | |
| if (RType != MachO::ARM_RELOC_PAIR) | |
| report_error(Obj->getFileName(), "Expected ARM_RELOC_PAIR after " | |
| "ARM_RELOC_HALF"); | |
| // NOTE: The half of the target virtual address is stashed in the | |
| // address field of the secondary relocation, but we can't reverse | |
| // engineer the constant offset from it without decoding the movw/movt | |
| // instruction to find the other half in its immediate field. | |
| // ARM_RELOC_HALF_SECTDIFF encodes the second section in the | |
| // symbol/section pointer of the follow-on relocation. | |
| if (Type == MachO::ARM_RELOC_HALF_SECTDIFF) { | |
| fmt << "-"; | |
| printRelocationTargetName(Obj, RENext, fmt); | |
| } | |
| fmt << ")"; | |
| break; | |
| } | |
| default: { printRelocationTargetName(Obj, RE, fmt); } | |
| } | |
| } | |
| } else | |
| printRelocationTargetName(Obj, RE, fmt); | |
| fmt.flush(); | |
| Result.append(fmtbuf.begin(), fmtbuf.end()); | |
| return std::error_code(); | |
| } | |
| static std::error_code getRelocationValueString(const RelocationRef &Rel, | |
| SmallVectorImpl<char> &Result) { | |
| const ObjectFile *Obj = Rel.getObject(); | |
| if (auto *ELF = dyn_cast<ELFObjectFileBase>(Obj)) | |
| return getRelocationValueString(ELF, Rel, Result); | |
| if (auto *COFF = dyn_cast<COFFObjectFile>(Obj)) | |
| return getRelocationValueString(COFF, Rel, Result); | |
| if (auto *Wasm = dyn_cast<WasmObjectFile>(Obj)) | |
| return getRelocationValueString(Wasm, Rel, Result); | |
| if (auto *MachO = dyn_cast<MachOObjectFile>(Obj)) | |
| return getRelocationValueString(MachO, Rel, Result); | |
| llvm_unreachable("unknown object file format"); | |
| } | |
| /// Indicates whether this relocation should hidden when listing | |
| /// relocations, usually because it is the trailing part of a multipart | |
| /// relocation that will be printed as part of the leading relocation. | |
| static bool getHidden(RelocationRef RelRef) { | |
| const ObjectFile *Obj = RelRef.getObject(); | |
| auto *MachO = dyn_cast<MachOObjectFile>(Obj); | |
| if (!MachO) | |
| return false; | |
| unsigned Arch = MachO->getArch(); | |
| DataRefImpl Rel = RelRef.getRawDataRefImpl(); | |
| uint64_t Type = MachO->getRelocationType(Rel); | |
| // On arches that use the generic relocations, GENERIC_RELOC_PAIR | |
| // is always hidden. | |
| if (Arch == Triple::x86 || Arch == Triple::arm || Arch == Triple::ppc) { | |
| if (Type == MachO::GENERIC_RELOC_PAIR) | |
| return true; | |
| } else if (Arch == Triple::x86_64) { | |
| // On x86_64, X86_64_RELOC_UNSIGNED is hidden only when it follows | |
| // an X86_64_RELOC_SUBTRACTOR. | |
| if (Type == MachO::X86_64_RELOC_UNSIGNED && Rel.d.a > 0) { | |
| DataRefImpl RelPrev = Rel; | |
| RelPrev.d.a--; | |
| uint64_t PrevType = MachO->getRelocationType(RelPrev); | |
| if (PrevType == MachO::X86_64_RELOC_SUBTRACTOR) | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| namespace { | |
| class SourcePrinter { | |
| protected: | |
| DILineInfo OldLineInfo; | |
| const ObjectFile *Obj = nullptr; | |
| std::unique_ptr<symbolize::LLVMSymbolizer> Symbolizer; | |
| // File name to file contents of source | |
| std::unordered_map<std::string, std::unique_ptr<MemoryBuffer>> SourceCache; | |
| // Mark the line endings of the cached source | |
| std::unordered_map<std::string, std::vector<StringRef>> LineCache; | |
| private: | |
| bool cacheSource(const DILineInfo& LineInfoFile); | |
| public: | |
| SourcePrinter() = default; | |
| SourcePrinter(const ObjectFile *Obj, StringRef DefaultArch) : Obj(Obj) { | |
| symbolize::LLVMSymbolizer::Options SymbolizerOpts( | |
| DILineInfoSpecifier::FunctionNameKind::None, true, false, false, | |
| DefaultArch); | |
| Symbolizer.reset(new symbolize::LLVMSymbolizer(SymbolizerOpts)); | |
| } | |
| virtual ~SourcePrinter() = default; | |
| virtual void printSourceLine(raw_ostream &OS, uint64_t Address, | |
| StringRef Delimiter = "; "); | |
| }; | |
| bool SourcePrinter::cacheSource(const DILineInfo &LineInfo) { | |
| std::unique_ptr<MemoryBuffer> Buffer; | |
| if (LineInfo.Source) { | |
| Buffer = MemoryBuffer::getMemBuffer(*LineInfo.Source); | |
| } else { | |
| auto BufferOrError = MemoryBuffer::getFile(LineInfo.FileName); | |
| if (!BufferOrError) | |
| return false; | |
| Buffer = std::move(*BufferOrError); | |
| } | |
| // Chomp the file to get lines | |
| size_t BufferSize = Buffer->getBufferSize(); | |
| const char *BufferStart = Buffer->getBufferStart(); | |
| for (const char *Start = BufferStart, *End = BufferStart; | |
| End < BufferStart + BufferSize; End++) | |
| if (*End == '\n' || End == BufferStart + BufferSize - 1 || | |
| (*End == '\r' && *(End + 1) == '\n')) { | |
| LineCache[LineInfo.FileName].push_back(StringRef(Start, End - Start)); | |
| if (*End == '\r') | |
| End++; | |
| Start = End + 1; | |
| } | |
| SourceCache[LineInfo.FileName] = std::move(Buffer); | |
| return true; | |
| } | |
| void SourcePrinter::printSourceLine(raw_ostream &OS, uint64_t Address, | |
| StringRef Delimiter) { | |
| if (!Symbolizer) | |
| return; | |
| DILineInfo LineInfo = DILineInfo(); | |
| auto ExpectecLineInfo = | |
| Symbolizer->symbolizeCode(Obj->getFileName(), Address); | |
| if (!ExpectecLineInfo) | |
| consumeError(ExpectecLineInfo.takeError()); | |
| else | |
| LineInfo = *ExpectecLineInfo; | |
| if ((LineInfo.FileName == "<invalid>") || OldLineInfo.Line == LineInfo.Line || | |
| LineInfo.Line == 0) | |
| return; | |
| if (PrintLines) | |
| OS << Delimiter << LineInfo.FileName << ":" << LineInfo.Line << "\n"; | |
| if (PrintSource) { | |
| if (SourceCache.find(LineInfo.FileName) == SourceCache.end()) | |
| if (!cacheSource(LineInfo)) | |
| return; | |
| auto FileBuffer = SourceCache.find(LineInfo.FileName); | |
| if (FileBuffer != SourceCache.end()) { | |
| auto LineBuffer = LineCache.find(LineInfo.FileName); | |
| if (LineBuffer != LineCache.end()) { | |
| if (LineInfo.Line > LineBuffer->second.size()) | |
| return; | |
| // Vector begins at 0, line numbers are non-zero | |
| OS << Delimiter << LineBuffer->second[LineInfo.Line - 1].ltrim() | |
| << "\n"; | |
| } | |
| } | |
| } | |
| OldLineInfo = LineInfo; | |
| } | |
| static bool isArmElf(const ObjectFile *Obj) { | |
| return (Obj->isELF() && | |
| (Obj->getArch() == Triple::aarch64 || | |
| Obj->getArch() == Triple::aarch64_be || | |
| Obj->getArch() == Triple::arm || Obj->getArch() == Triple::armeb || | |
| Obj->getArch() == Triple::thumb || | |
| Obj->getArch() == Triple::thumbeb)); | |
| } | |
| class PrettyPrinter { | |
| public: | |
| virtual ~PrettyPrinter() = default; | |
| virtual void printInst(MCInstPrinter &IP, const MCInst *MI, | |
| ArrayRef<uint8_t> Bytes, uint64_t Address, | |
| raw_ostream &OS, StringRef Annot, | |
| MCSubtargetInfo const &STI, SourcePrinter *SP, | |
| std::vector<RelocationRef> *Rels = nullptr) { | |
| if (SP && (PrintSource || PrintLines)) | |
| SP->printSourceLine(OS, Address); | |
| if (!NoLeadingAddr) | |
| OS << format("%8" PRIx64 ":", Address); | |
| if (!NoShowRawInsn) { | |
| OS << "\t"; | |
| dumpBytes(Bytes, OS); | |
| } | |
| if (MI) | |
| IP.printInst(MI, OS, "", STI); | |
| else | |
| OS << " <unknown>"; | |
| } | |
| }; | |
| PrettyPrinter PrettyPrinterInst; | |
| class HexagonPrettyPrinter : public PrettyPrinter { | |
| public: | |
| void printLead(ArrayRef<uint8_t> Bytes, uint64_t Address, | |
| raw_ostream &OS) { | |
| uint32_t opcode = | |
| (Bytes[3] << 24) | (Bytes[2] << 16) | (Bytes[1] << 8) | Bytes[0]; | |
| if (!NoLeadingAddr) | |
| OS << format("%8" PRIx64 ":", Address); | |
| if (!NoShowRawInsn) { | |
| OS << "\t"; | |
| dumpBytes(Bytes.slice(0, 4), OS); | |
| OS << format("%08" PRIx32, opcode); | |
| } | |
| } | |
| void printInst(MCInstPrinter &IP, const MCInst *MI, ArrayRef<uint8_t> Bytes, | |
| uint64_t Address, raw_ostream &OS, StringRef Annot, | |
| MCSubtargetInfo const &STI, SourcePrinter *SP, | |
| std::vector<RelocationRef> *Rels) override { | |
| if (SP && (PrintSource || PrintLines)) | |
| SP->printSourceLine(OS, Address, ""); | |
| if (!MI) { | |
| printLead(Bytes, Address, OS); | |
| OS << " <unknown>"; | |
| return; | |
| } | |
| std::string Buffer; | |
| { | |
| raw_string_ostream TempStream(Buffer); | |
| IP.printInst(MI, TempStream, "", STI); | |
| } | |
| StringRef Contents(Buffer); | |
| // Split off bundle attributes | |
| auto PacketBundle = Contents.rsplit('\n'); | |
| // Split off first instruction from the rest | |
| auto HeadTail = PacketBundle.first.split('\n'); | |
| auto Preamble = " { "; | |
| auto Separator = ""; | |
| StringRef Fmt = "\t\t\t%08" PRIx64 ": "; | |
| std::vector<RelocationRef>::const_iterator rel_cur = Rels->begin(); | |
| std::vector<RelocationRef>::const_iterator rel_end = Rels->end(); | |
| // Hexagon's packets require relocations to be inline rather than | |
| // clustered at the end of the packet. | |
| auto PrintReloc = [&]() -> void { | |
| while ((rel_cur != rel_end) && (rel_cur->getOffset() <= Address)) { | |
| if (rel_cur->getOffset() == Address) { | |
| SmallString<16> name; | |
| SmallString<32> val; | |
| rel_cur->getTypeName(name); | |
| error(getRelocationValueString(*rel_cur, val)); | |
| OS << Separator << format(Fmt.data(), Address) << name << "\t" << val | |
| << "\n"; | |
| return; | |
| } | |
| rel_cur++; | |
| } | |
| }; | |
| while(!HeadTail.first.empty()) { | |
| OS << Separator; | |
| Separator = "\n"; | |
| if (SP && (PrintSource || PrintLines)) | |
| SP->printSourceLine(OS, Address, ""); | |
| printLead(Bytes, Address, OS); | |
| OS << Preamble; | |
| Preamble = " "; | |
| StringRef Inst; | |
| auto Duplex = HeadTail.first.split('\v'); | |
| if(!Duplex.second.empty()){ | |
| OS << Duplex.first; | |
| OS << "; "; | |
| Inst = Duplex.second; | |
| } | |
| else | |
| Inst = HeadTail.first; | |
| OS << Inst; | |
| HeadTail = HeadTail.second.split('\n'); | |
| if (HeadTail.first.empty()) | |
| OS << " } " << PacketBundle.second; | |
| PrintReloc(); | |
| Bytes = Bytes.slice(4); | |
| Address += 4; | |
| } | |
| } | |
| }; | |
| HexagonPrettyPrinter HexagonPrettyPrinterInst; | |
| class AMDGCNPrettyPrinter : public PrettyPrinter { | |
| public: | |
| void printInst(MCInstPrinter &IP, const MCInst *MI, ArrayRef<uint8_t> Bytes, | |
| uint64_t Address, raw_ostream &OS, StringRef Annot, | |
| MCSubtargetInfo const &STI, SourcePrinter *SP, | |
| std::vector<RelocationRef> *Rels) override { | |
| if (SP && (PrintSource || PrintLines)) | |
| SP->printSourceLine(OS, Address); | |
| typedef support::ulittle32_t U32; | |
| if (MI) { | |
| SmallString<40> InstStr; | |
| raw_svector_ostream IS(InstStr); | |
| IP.printInst(MI, IS, "", STI); | |
| OS << left_justify(IS.str(), 60); | |
| } else { | |
| // an unrecognized encoding - this is probably data so represent it | |
| // using the .long directive, or .byte directive if fewer than 4 bytes | |
| // remaining | |
| if (Bytes.size() >= 4) { | |
| OS << format("\t.long 0x%08" PRIx32 " ", | |
| static_cast<uint32_t>(*reinterpret_cast<const U32*>(Bytes.data()))); | |
| OS.indent(42); | |
| } else { | |
| OS << format("\t.byte 0x%02" PRIx8, Bytes[0]); | |
| for (unsigned int i = 1; i < Bytes.size(); i++) | |
| OS << format(", 0x%02" PRIx8, Bytes[i]); | |
| OS.indent(55 - (6 * Bytes.size())); | |
| } | |
| } | |
| OS << format("// %012" PRIX64 ": ", Address); | |
| if (Bytes.size() >=4) { | |
| for (auto D : makeArrayRef(reinterpret_cast<const U32*>(Bytes.data()), | |
| Bytes.size() / sizeof(U32))) | |
| // D should be explicitly casted to uint32_t here as it is passed | |
| // by format to snprintf as vararg. | |
| OS << format("%08" PRIX32 " ", static_cast<uint32_t>(D)); | |
| } else { | |
| for (unsigned int i = 0; i < Bytes.size(); i++) | |
| OS << format("%02" PRIX8 " ", Bytes[i]); | |
| } | |
| if (!Annot.empty()) | |
| OS << "// " << Annot; | |
| } | |
| }; | |
| AMDGCNPrettyPrinter AMDGCNPrettyPrinterInst; | |
| class BPFPrettyPrinter : public PrettyPrinter { | |
| public: | |
| void printInst(MCInstPrinter &IP, const MCInst *MI, ArrayRef<uint8_t> Bytes, | |
| uint64_t Address, raw_ostream &OS, StringRef Annot, | |
| MCSubtargetInfo const &STI, SourcePrinter *SP, | |
| std::vector<RelocationRef> *Rels) override { | |
| if (SP && (PrintSource || PrintLines)) | |
| SP->printSourceLine(OS, Address); | |
| if (!NoLeadingAddr) | |
| OS << format("%8" PRId64 ":", Address / 8); | |
| if (!NoShowRawInsn) { | |
| OS << "\t"; | |
| dumpBytes(Bytes, OS); | |
| } | |
| if (MI) | |
| IP.printInst(MI, OS, "", STI); | |
| else | |
| OS << " <unknown>"; | |
| } | |
| }; | |
| BPFPrettyPrinter BPFPrettyPrinterInst; | |
| PrettyPrinter &selectPrettyPrinter(Triple const &Triple) { | |
| switch(Triple.getArch()) { | |
| default: | |
| return PrettyPrinterInst; | |
| case Triple::hexagon: | |
| return HexagonPrettyPrinterInst; | |
| case Triple::amdgcn: | |
| return AMDGCNPrettyPrinterInst; | |
| case Triple::bpfel: | |
| case Triple::bpfeb: | |
| return BPFPrettyPrinterInst; | |
| } | |
| } | |
| } | |
| static uint8_t getElfSymbolType(const ObjectFile *Obj, const SymbolRef &Sym) { | |
| assert(Obj->isELF()); | |
| if (auto *Elf32LEObj = dyn_cast<ELF32LEObjectFile>(Obj)) | |
| return Elf32LEObj->getSymbol(Sym.getRawDataRefImpl())->getType(); | |
| if (auto *Elf64LEObj = dyn_cast<ELF64LEObjectFile>(Obj)) | |
| return Elf64LEObj->getSymbol(Sym.getRawDataRefImpl())->getType(); | |
| if (auto *Elf32BEObj = dyn_cast<ELF32BEObjectFile>(Obj)) | |
| return Elf32BEObj->getSymbol(Sym.getRawDataRefImpl())->getType(); | |
| if (auto *Elf64BEObj = cast<ELF64BEObjectFile>(Obj)) | |
| return Elf64BEObj->getSymbol(Sym.getRawDataRefImpl())->getType(); | |
| llvm_unreachable("Unsupported binary format"); | |
| } | |
| template <class ELFT> static void | |
| addDynamicElfSymbols(const ELFObjectFile<ELFT> *Obj, | |
| std::map<SectionRef, SectionSymbolsTy> &AllSymbols) { | |
| for (auto Symbol : Obj->getDynamicSymbolIterators()) { | |
| uint8_t SymbolType = Symbol.getELFType(); | |
| if (SymbolType != ELF::STT_FUNC || Symbol.getSize() == 0) | |
| continue; | |
| Expected<uint64_t> AddressOrErr = Symbol.getAddress(); | |
| if (!AddressOrErr) | |
| report_error(Obj->getFileName(), AddressOrErr.takeError()); | |
| uint64_t Address = *AddressOrErr; | |
| Expected<StringRef> Name = Symbol.getName(); | |
| if (!Name) | |
| report_error(Obj->getFileName(), Name.takeError()); | |
| if (Name->empty()) | |
| continue; | |
| Expected<section_iterator> SectionOrErr = Symbol.getSection(); | |
| if (!SectionOrErr) | |
| report_error(Obj->getFileName(), SectionOrErr.takeError()); | |
| section_iterator SecI = *SectionOrErr; | |
| if (SecI == Obj->section_end()) | |
| continue; | |
| AllSymbols[*SecI].emplace_back(Address, *Name, SymbolType); | |
| } | |
| } | |
| static void | |
| addDynamicElfSymbols(const ObjectFile *Obj, | |
| std::map<SectionRef, SectionSymbolsTy> &AllSymbols) { | |
| assert(Obj->isELF()); | |
| if (auto *Elf32LEObj = dyn_cast<ELF32LEObjectFile>(Obj)) | |
| addDynamicElfSymbols(Elf32LEObj, AllSymbols); | |
| else if (auto *Elf64LEObj = dyn_cast<ELF64LEObjectFile>(Obj)) | |
| addDynamicElfSymbols(Elf64LEObj, AllSymbols); | |
| else if (auto *Elf32BEObj = dyn_cast<ELF32BEObjectFile>(Obj)) | |
| addDynamicElfSymbols(Elf32BEObj, AllSymbols); | |
| else if (auto *Elf64BEObj = cast<ELF64BEObjectFile>(Obj)) | |
| addDynamicElfSymbols(Elf64BEObj, AllSymbols); | |
| else | |
| llvm_unreachable("Unsupported binary format"); | |
| } | |
| static void DisassembleObject(const ObjectFile *Obj, bool InlineRelocs) { | |
| if (StartAddress > StopAddress) | |
| error("Start address should be less than stop address"); | |
| const Target *TheTarget = getTarget(Obj); | |
| // Package up features to be passed to target/subtarget | |
| SubtargetFeatures Features = Obj->getFeatures(); | |
| if (MAttrs.size()) { | |
| for (unsigned i = 0; i != MAttrs.size(); ++i) | |
| Features.AddFeature(MAttrs[i]); | |
| } | |
| std::unique_ptr<const MCRegisterInfo> MRI( | |
| TheTarget->createMCRegInfo(TripleName)); | |
| if (!MRI) | |
| report_error(Obj->getFileName(), "no register info for target " + | |
| TripleName); | |
| // Set up disassembler. | |
| std::unique_ptr<const MCAsmInfo> AsmInfo( | |
| TheTarget->createMCAsmInfo(*MRI, TripleName)); | |
| if (!AsmInfo) | |
| report_error(Obj->getFileName(), "no assembly info for target " + | |
| TripleName); | |
| std::unique_ptr<const MCSubtargetInfo> STI( | |
| TheTarget->createMCSubtargetInfo(TripleName, MCPU, Features.getString())); | |
| if (!STI) | |
| report_error(Obj->getFileName(), "no subtarget info for target " + | |
| TripleName); | |
| std::unique_ptr<const MCInstrInfo> MII(TheTarget->createMCInstrInfo()); | |
| if (!MII) | |
| report_error(Obj->getFileName(), "no instruction info for target " + | |
| TripleName); | |
| MCObjectFileInfo MOFI; | |
| MCContext Ctx(AsmInfo.get(), MRI.get(), &MOFI); | |
| // FIXME: for now initialize MCObjectFileInfo with default values | |
| MOFI.InitMCObjectFileInfo(Triple(TripleName), false, Ctx); | |
| std::unique_ptr<MCDisassembler> DisAsm( | |
| TheTarget->createMCDisassembler(*STI, Ctx)); | |
| if (!DisAsm) | |
| report_error(Obj->getFileName(), "no disassembler for target " + | |
| TripleName); | |
| std::unique_ptr<const MCInstrAnalysis> MIA( | |
| TheTarget->createMCInstrAnalysis(MII.get())); | |
| int AsmPrinterVariant = AsmInfo->getAssemblerDialect(); | |
| std::unique_ptr<MCInstPrinter> IP(TheTarget->createMCInstPrinter( | |
| Triple(TripleName), AsmPrinterVariant, *AsmInfo, *MII, *MRI)); | |
| if (!IP) | |
| report_error(Obj->getFileName(), "no instruction printer for target " + | |
| TripleName); | |
| IP->setPrintImmHex(PrintImmHex); | |
| PrettyPrinter &PIP = selectPrettyPrinter(Triple(TripleName)); | |
| StringRef Fmt = Obj->getBytesInAddress() > 4 ? "\t\t%016" PRIx64 ": " : | |
| "\t\t\t%08" PRIx64 ": "; | |
| SourcePrinter SP(Obj, TheTarget->getName()); | |
| // Create a mapping, RelocSecs = SectionRelocMap[S], where sections | |
| // in RelocSecs contain the relocations for section S. | |
| std::error_code EC; | |
| std::map<SectionRef, SmallVector<SectionRef, 1>> SectionRelocMap; | |
| for (const SectionRef &Section : ToolSectionFilter(*Obj)) { | |
| section_iterator Sec2 = Section.getRelocatedSection(); | |
| if (Sec2 != Obj->section_end()) | |
| SectionRelocMap[*Sec2].push_back(Section); | |
| } | |
| // Create a mapping from virtual address to symbol name. This is used to | |
| // pretty print the symbols while disassembling. | |
| std::map<SectionRef, SectionSymbolsTy> AllSymbols; | |
| SectionSymbolsTy AbsoluteSymbols; | |
| for (const SymbolRef &Symbol : Obj->symbols()) { | |
| Expected<uint64_t> AddressOrErr = Symbol.getAddress(); | |
| if (!AddressOrErr) | |
| report_error(Obj->getFileName(), AddressOrErr.takeError()); | |
| uint64_t Address = *AddressOrErr; | |
| Expected<StringRef> Name = Symbol.getName(); | |
| if (!Name) | |
| report_error(Obj->getFileName(), Name.takeError()); | |
| if (Name->empty()) | |
| continue; | |
| Expected<section_iterator> SectionOrErr = Symbol.getSection(); | |
| if (!SectionOrErr) | |
| report_error(Obj->getFileName(), SectionOrErr.takeError()); | |
| uint8_t SymbolType = ELF::STT_NOTYPE; | |
| if (Obj->isELF()) | |
| SymbolType = getElfSymbolType(Obj, Symbol); | |
| section_iterator SecI = *SectionOrErr; | |
| if (SecI != Obj->section_end()) | |
| AllSymbols[*SecI].emplace_back(Address, *Name, SymbolType); | |
| else | |
| AbsoluteSymbols.emplace_back(Address, *Name, SymbolType); | |
| } | |
| if (AllSymbols.empty() && Obj->isELF()) | |
| addDynamicElfSymbols(Obj, AllSymbols); | |
| // Create a mapping from virtual address to section. | |
| std::vector<std::pair<uint64_t, SectionRef>> SectionAddresses; | |
| for (SectionRef Sec : Obj->sections()) | |
| SectionAddresses.emplace_back(Sec.getAddress(), Sec); | |
| array_pod_sort(SectionAddresses.begin(), SectionAddresses.end()); | |
| // Linked executables (.exe and .dll files) typically don't include a real | |
| // symbol table but they might contain an export table. | |
| if (const auto *COFFObj = dyn_cast<COFFObjectFile>(Obj)) { | |
| for (const auto &ExportEntry : COFFObj->export_directories()) { | |
| StringRef Name; | |
| error(ExportEntry.getSymbolName(Name)); | |
| if (Name.empty()) | |
| continue; | |
| uint32_t RVA; | |
| error(ExportEntry.getExportRVA(RVA)); | |
| uint64_t VA = COFFObj->getImageBase() + RVA; | |
| auto Sec = std::upper_bound( | |
| SectionAddresses.begin(), SectionAddresses.end(), VA, | |
| [](uint64_t LHS, const std::pair<uint64_t, SectionRef> &RHS) { | |
| return LHS < RHS.first; | |
| }); | |
| if (Sec != SectionAddresses.begin()) | |
| --Sec; | |
| else | |
| Sec = SectionAddresses.end(); | |
| if (Sec != SectionAddresses.end()) | |
| AllSymbols[Sec->second].emplace_back(VA, Name, ELF::STT_NOTYPE); | |
| else | |
| AbsoluteSymbols.emplace_back(VA, Name, ELF::STT_NOTYPE); | |
| } | |
| } | |
| // Sort all the symbols, this allows us to use a simple binary search to find | |
| // a symbol near an address. | |
| for (std::pair<const SectionRef, SectionSymbolsTy> &SecSyms : AllSymbols) | |
| array_pod_sort(SecSyms.second.begin(), SecSyms.second.end()); | |
| array_pod_sort(AbsoluteSymbols.begin(), AbsoluteSymbols.end()); | |
| for (const SectionRef &Section : ToolSectionFilter(*Obj)) { | |
| if (!DisassembleAll && (!Section.isText() || Section.isVirtual())) | |
| continue; | |
| uint64_t SectionAddr = Section.getAddress(); | |
| uint64_t SectSize = Section.getSize(); | |
| if (!SectSize) | |
| continue; | |
| // Get the list of all the symbols in this section. | |
| SectionSymbolsTy &Symbols = AllSymbols[Section]; | |
| std::vector<uint64_t> DataMappingSymsAddr; | |
| std::vector<uint64_t> TextMappingSymsAddr; | |
| if (isArmElf(Obj)) { | |
| for (const auto &Symb : Symbols) { | |
| uint64_t Address = std::get<0>(Symb); | |
| StringRef Name = std::get<1>(Symb); | |
| if (Name.startswith("$d")) | |
| DataMappingSymsAddr.push_back(Address - SectionAddr); | |
| if (Name.startswith("$x")) | |
| TextMappingSymsAddr.push_back(Address - SectionAddr); | |
| if (Name.startswith("$a")) | |
| TextMappingSymsAddr.push_back(Address - SectionAddr); | |
| if (Name.startswith("$t")) | |
| TextMappingSymsAddr.push_back(Address - SectionAddr); | |
| } | |
| } | |
| llvm::sort(DataMappingSymsAddr.begin(), DataMappingSymsAddr.end()); | |
| llvm::sort(TextMappingSymsAddr.begin(), TextMappingSymsAddr.end()); | |
| if (Obj->isELF() && Obj->getArch() == Triple::amdgcn) { | |
| // AMDGPU disassembler uses symbolizer for printing labels | |
| std::unique_ptr<MCRelocationInfo> RelInfo( | |
| TheTarget->createMCRelocationInfo(TripleName, Ctx)); | |
| if (RelInfo) { | |
| std::unique_ptr<MCSymbolizer> Symbolizer( | |
| TheTarget->createMCSymbolizer( | |
| TripleName, nullptr, nullptr, &Symbols, &Ctx, std::move(RelInfo))); | |
| DisAsm->setSymbolizer(std::move(Symbolizer)); | |
| } | |
| } | |
| // Make a list of all the relocations for this section. | |
| std::vector<RelocationRef> Rels; | |
| if (InlineRelocs) { | |
| for (const SectionRef &RelocSec : SectionRelocMap[Section]) { | |
| for (const RelocationRef &Reloc : RelocSec.relocations()) { | |
| Rels.push_back(Reloc); | |
| } | |
| } | |
| } | |
| // Sort relocations by address. | |
| llvm::sort(Rels.begin(), Rels.end(), RelocAddressLess); | |
| StringRef SegmentName = ""; | |
| if (const MachOObjectFile *MachO = dyn_cast<const MachOObjectFile>(Obj)) { | |
| DataRefImpl DR = Section.getRawDataRefImpl(); | |
| SegmentName = MachO->getSectionFinalSegmentName(DR); | |
| } | |
| StringRef SectionName; | |
| error(Section.getName(SectionName)); | |
| // If the section has no symbol at the start, just insert a dummy one. | |
| if (Symbols.empty() || std::get<0>(Symbols[0]) != 0) { | |
| Symbols.insert( | |
| Symbols.begin(), | |
| std::make_tuple(SectionAddr, SectionName, | |
| Section.isText() ? ELF::STT_FUNC : ELF::STT_OBJECT)); | |
| } | |
| SmallString<40> Comments; | |
| raw_svector_ostream CommentStream(Comments); | |
| StringRef BytesStr; | |
| error(Section.getContents(BytesStr)); | |
| ArrayRef<uint8_t> Bytes(reinterpret_cast<const uint8_t *>(BytesStr.data()), | |
| BytesStr.size()); | |
| uint64_t Size; | |
| uint64_t Index; | |
| bool PrintedSection = false; | |
| std::vector<RelocationRef>::const_iterator rel_cur = Rels.begin(); | |
| std::vector<RelocationRef>::const_iterator rel_end = Rels.end(); | |
| // Disassemble symbol by symbol. | |
| for (unsigned si = 0, se = Symbols.size(); si != se; ++si) { | |
| uint64_t Start = std::get<0>(Symbols[si]) - SectionAddr; | |
| // The end is either the section end or the beginning of the next | |
| // symbol. | |
| uint64_t End = | |
| (si == se - 1) ? SectSize : std::get<0>(Symbols[si + 1]) - SectionAddr; | |
| // Don't try to disassemble beyond the end of section contents. | |
| if (End > SectSize) | |
| End = SectSize; | |
| // If this symbol has the same address as the next symbol, then skip it. | |
| if (Start >= End) | |
| continue; | |
| // Check if we need to skip symbol | |
| // Skip if the symbol's data is not between StartAddress and StopAddress | |
| if (End + SectionAddr < StartAddress || | |
| Start + SectionAddr > StopAddress) { | |
| continue; | |
| } | |
| /// Skip if user requested specific symbols and this is not in the list | |
| if (!DisasmFuncsSet.empty() && | |
| !DisasmFuncsSet.count(std::get<1>(Symbols[si]))) | |
| continue; | |
| if (!PrintedSection) { | |
| PrintedSection = true; | |
| outs() << "Disassembly of section "; | |
| if (!SegmentName.empty()) | |
| outs() << SegmentName << ","; | |
| outs() << SectionName << ':'; | |
| } | |
| // Stop disassembly at the stop address specified | |
| if (End + SectionAddr > StopAddress) | |
| End = StopAddress - SectionAddr; | |
| if (Obj->isELF() && Obj->getArch() == Triple::amdgcn) { | |
| if (std::get<2>(Symbols[si]) == ELF::STT_AMDGPU_HSA_KERNEL) { | |
| // skip amd_kernel_code_t at the begining of kernel symbol (256 bytes) | |
| Start += 256; | |
| } | |
| if (si == se - 1 || | |
| std::get<2>(Symbols[si + 1]) == ELF::STT_AMDGPU_HSA_KERNEL) { | |
| // cut trailing zeroes at the end of kernel | |
| // cut up to 256 bytes | |
| const uint64_t EndAlign = 256; | |
| const auto Limit = End - (std::min)(EndAlign, End - Start); | |
| while (End > Limit && | |
| *reinterpret_cast<const support::ulittle32_t*>(&Bytes[End - 4]) == 0) | |
| End -= 4; | |
| } | |
| } | |
| auto PrintSymbol = [](StringRef Name) { | |
| outs() << '\n' << Name << ":\n"; | |
| }; | |
| StringRef SymbolName = std::get<1>(Symbols[si]); | |
| if (Demangle.getValue() == "" || Demangle.getValue() == "itanium") { | |
| char *DemangledSymbol = nullptr; | |
| size_t Size = 0; | |
| int Status; | |
| DemangledSymbol = | |
| itaniumDemangle(SymbolName.data(), DemangledSymbol, &Size, &Status); | |
| if (Status == 0) | |
| PrintSymbol(StringRef(DemangledSymbol)); | |
| else | |
| PrintSymbol(SymbolName); | |
| if (Size != 0) | |
| free(DemangledSymbol); | |
| } else | |
| PrintSymbol(SymbolName); | |
| // Don't print raw contents of a virtual section. A virtual section | |
| // doesn't have any contents in the file. | |
| if (Section.isVirtual()) { | |
| outs() << "...\n"; | |
| continue; | |
| } | |
| #ifndef NDEBUG | |
| raw_ostream &DebugOut = DebugFlag ? dbgs() : nulls(); | |
| #else | |
| raw_ostream &DebugOut = nulls(); | |
| #endif | |
| for (Index = Start; Index < End; Index += Size) { | |
| MCInst Inst; | |
| if (Index + SectionAddr < StartAddress || | |
| Index + SectionAddr > StopAddress) { | |
| // skip byte by byte till StartAddress is reached | |
| Size = 1; | |
| continue; | |
| } | |
| // AArch64 ELF binaries can interleave data and text in the | |
| // same section. We rely on the markers introduced to | |
| // understand what we need to dump. If the data marker is within a | |
| // function, it is denoted as a word/short etc | |
| if (isArmElf(Obj) && std::get<2>(Symbols[si]) != ELF::STT_OBJECT && | |
| !DisassembleAll) { | |
| uint64_t Stride = 0; | |
| auto DAI = std::lower_bound(DataMappingSymsAddr.begin(), | |
| DataMappingSymsAddr.end(), Index); | |
| if (DAI != DataMappingSymsAddr.end() && *DAI == Index) { | |
| // Switch to data. | |
| while (Index < End) { | |
| outs() << format("%8" PRIx64 ":", SectionAddr + Index); | |
| outs() << "\t"; | |
| if (Index + 4 <= End) { | |
| Stride = 4; | |
| dumpBytes(Bytes.slice(Index, 4), outs()); | |
| outs() << "\t.word\t"; | |
| uint32_t Data = 0; | |
| if (Obj->isLittleEndian()) { | |
| const auto Word = | |
| reinterpret_cast<const support::ulittle32_t *>( | |
| Bytes.data() + Index); | |
| Data = *Word; | |
| } else { | |
| const auto Word = reinterpret_cast<const support::ubig32_t *>( | |
| Bytes.data() + Index); | |
| Data = *Word; | |
| } | |
| outs() << "0x" << format("%08" PRIx32, Data); | |
| } else if (Index + 2 <= End) { | |
| Stride = 2; | |
| dumpBytes(Bytes.slice(Index, 2), outs()); | |
| outs() << "\t\t.short\t"; | |
| uint16_t Data = 0; | |
| if (Obj->isLittleEndian()) { | |
| const auto Short = | |
| reinterpret_cast<const support::ulittle16_t *>( | |
| Bytes.data() + Index); | |
| Data = *Short; | |
| } else { | |
| const auto Short = | |
| reinterpret_cast<const support::ubig16_t *>(Bytes.data() + | |
| Index); | |
| Data = *Short; | |
| } | |
| outs() << "0x" << format("%04" PRIx16, Data); | |
| } else { | |
| Stride = 1; | |
| dumpBytes(Bytes.slice(Index, 1), outs()); | |
| outs() << "\t\t.byte\t"; | |
| outs() << "0x" << format("%02" PRIx8, Bytes.slice(Index, 1)[0]); | |
| } | |
| Index += Stride; | |
| outs() << "\n"; | |
| auto TAI = std::lower_bound(TextMappingSymsAddr.begin(), | |
| TextMappingSymsAddr.end(), Index); | |
| if (TAI != TextMappingSymsAddr.end() && *TAI == Index) | |
| break; | |
| } | |
| } | |
| } | |
| // If there is a data symbol inside an ELF text section and we are only | |
| // disassembling text (applicable all architectures), | |
| // we are in a situation where we must print the data and not | |
| // disassemble it. | |
| if (Obj->isELF() && std::get<2>(Symbols[si]) == ELF::STT_OBJECT && | |
| !DisassembleAll && Section.isText()) { | |
| // print out data up to 8 bytes at a time in hex and ascii | |
| uint8_t AsciiData[9] = {'\0'}; | |
| uint8_t Byte; | |
| int NumBytes = 0; | |
| for (Index = Start; Index < End; Index += 1) { | |
| if (((SectionAddr + Index) < StartAddress) || | |
| ((SectionAddr + Index) > StopAddress)) | |
| continue; | |
| if (NumBytes == 0) { | |
| outs() << format("%8" PRIx64 ":", SectionAddr + Index); | |
| outs() << "\t"; | |
| } | |
| Byte = Bytes.slice(Index)[0]; | |
| outs() << format(" %02x", Byte); | |
| AsciiData[NumBytes] = isPrint(Byte) ? Byte : '.'; | |
| uint8_t IndentOffset = 0; | |
| NumBytes++; | |
| if (Index == End - 1 || NumBytes > 8) { | |
| // Indent the space for less than 8 bytes data. | |
| // 2 spaces for byte and one for space between bytes | |
| IndentOffset = 3 * (8 - NumBytes); | |
| for (int Excess = 8 - NumBytes; Excess < 8; Excess++) | |
| AsciiData[Excess] = '\0'; | |
| NumBytes = 8; | |
| } | |
| if (NumBytes == 8) { | |
| AsciiData[8] = '\0'; | |
| outs() << std::string(IndentOffset, ' ') << " "; | |
| outs() << reinterpret_cast<char *>(AsciiData); | |
| outs() << '\n'; | |
| NumBytes = 0; | |
| } | |
| } | |
| } | |
| if (Index >= End) | |
| break; | |
| // Disassemble a real instruction or a data when disassemble all is | |
| // provided | |
| bool Disassembled = DisAsm->getInstruction(Inst, Size, Bytes.slice(Index), | |
| SectionAddr + Index, DebugOut, | |
| CommentStream); | |
| if (Size == 0) | |
| Size = 1; | |
| PIP.printInst(*IP, Disassembled ? &Inst : nullptr, | |
| Bytes.slice(Index, Size), SectionAddr + Index, outs(), "", | |
| *STI, &SP, &Rels); | |
| outs() << CommentStream.str(); | |
| Comments.clear(); | |
| // Try to resolve the target of a call, tail call, etc. to a specific | |
| // symbol. | |
| if (MIA && (MIA->isCall(Inst) || MIA->isUnconditionalBranch(Inst) || | |
| MIA->isConditionalBranch(Inst))) { | |
| uint64_t Target; | |
| if (MIA->evaluateBranch(Inst, SectionAddr + Index, Size, Target)) { | |
| // In a relocatable object, the target's section must reside in | |
| // the same section as the call instruction or it is accessed | |
| // through a relocation. | |
| // | |
| // In a non-relocatable object, the target may be in any section. | |
| // | |
| // N.B. We don't walk the relocations in the relocatable case yet. | |
| auto *TargetSectionSymbols = &Symbols; | |
| if (!Obj->isRelocatableObject()) { | |
| auto SectionAddress = std::upper_bound( | |
| SectionAddresses.begin(), SectionAddresses.end(), Target, | |
| [](uint64_t LHS, | |
| const std::pair<uint64_t, SectionRef> &RHS) { | |
| return LHS < RHS.first; | |
| }); | |
| if (SectionAddress != SectionAddresses.begin()) { | |
| --SectionAddress; | |
| TargetSectionSymbols = &AllSymbols[SectionAddress->second]; | |
| } else { | |
| TargetSectionSymbols = &AbsoluteSymbols; | |
| } | |
| } | |
| // Find the first symbol in the section whose offset is less than | |
| // or equal to the target. If there isn't a section that contains | |
| // the target, find the nearest preceding absolute symbol. | |
| auto TargetSym = std::upper_bound( | |
| TargetSectionSymbols->begin(), TargetSectionSymbols->end(), | |
| Target, [](uint64_t LHS, | |
| const std::tuple<uint64_t, StringRef, uint8_t> &RHS) { | |
| return LHS < std::get<0>(RHS); | |
| }); | |
| if (TargetSym == TargetSectionSymbols->begin()) { | |
| TargetSectionSymbols = &AbsoluteSymbols; | |
| TargetSym = std::upper_bound( | |
| AbsoluteSymbols.begin(), AbsoluteSymbols.end(), | |
| Target, [](uint64_t LHS, | |
| const std::tuple<uint64_t, StringRef, uint8_t> &RHS) { | |
| return LHS < std::get<0>(RHS); | |
| }); | |
| } | |
| if (TargetSym != TargetSectionSymbols->begin()) { | |
| --TargetSym; | |
| uint64_t TargetAddress = std::get<0>(*TargetSym); | |
| StringRef TargetName = std::get<1>(*TargetSym); | |
| outs() << " <" << TargetName; | |
| uint64_t Disp = Target - TargetAddress; | |
| if (Disp) | |
| outs() << "+0x" << Twine::utohexstr(Disp); | |
| outs() << '>'; | |
| } | |
| } | |
| } | |
| outs() << "\n"; | |
| // Hexagon does this in pretty printer | |
| if (Obj->getArch() != Triple::hexagon) | |
| // Print relocation for instruction. | |
| while (rel_cur != rel_end) { | |
| bool hidden = getHidden(*rel_cur); | |
| uint64_t addr = rel_cur->getOffset(); | |
| SmallString<16> name; | |
| SmallString<32> val; | |
| // If this relocation is hidden, skip it. | |
| if (hidden || ((SectionAddr + addr) < StartAddress)) { | |
| ++rel_cur; | |
| continue; | |
| } | |
| // Stop when rel_cur's address is past the current instruction. | |
| if (addr >= Index + Size) break; | |
| rel_cur->getTypeName(name); | |
| error(getRelocationValueString(*rel_cur, val)); | |
| outs() << format(Fmt.data(), SectionAddr + addr) << name | |
| << "\t" << val << "\n"; | |
| ++rel_cur; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| void llvm::PrintRelocations(const ObjectFile *Obj) { | |
| StringRef Fmt = Obj->getBytesInAddress() > 4 ? "%016" PRIx64 : | |
| "%08" PRIx64; | |
| // Regular objdump doesn't print relocations in non-relocatable object | |
| // files. | |
| if (!Obj->isRelocatableObject()) | |
| return; | |
| for (const SectionRef &Section : ToolSectionFilter(*Obj)) { | |
| if (Section.relocation_begin() == Section.relocation_end()) | |
| continue; | |
| StringRef secname; | |
| error(Section.getName(secname)); | |
| outs() << "RELOCATION RECORDS FOR [" << secname << "]:\n"; | |
| for (const RelocationRef &Reloc : Section.relocations()) { | |
| bool hidden = getHidden(Reloc); | |
| uint64_t address = Reloc.getOffset(); | |
| SmallString<32> relocname; | |
| SmallString<32> valuestr; | |
| if (address < StartAddress || address > StopAddress || hidden) | |
| continue; | |
| Reloc.getTypeName(relocname); | |
| error(getRelocationValueString(Reloc, valuestr)); | |
| outs() << format(Fmt.data(), address) << " " << relocname << " " | |
| << valuestr << "\n"; | |
| } | |
| outs() << "\n"; | |
| } | |
| } | |
| void llvm::PrintDynamicRelocations(const ObjectFile *Obj) { | |
| // For the moment, this option is for ELF only | |
| if (!Obj->isELF()) | |
| return; | |
| const auto *Elf = dyn_cast<ELFObjectFileBase>(Obj); | |
| if (!Elf || Elf->getEType() != ELF::ET_DYN) { | |
| error("not a dynamic object"); | |
| return; | |
| } | |
| StringRef Fmt = Obj->getBytesInAddress() > 4 ? "%016" PRIx64 : "%08" PRIx64; | |
| std::vector<SectionRef> DynRelSec = Obj->dynamic_relocation_sections(); | |
| if (DynRelSec.empty()) | |
| return; | |
| outs() << "DYNAMIC RELOCATION RECORDS\n"; | |
| for (const SectionRef &Section : DynRelSec) { | |
| if (Section.relocation_begin() == Section.relocation_end()) | |
| continue; | |
| for (const RelocationRef &Reloc : Section.relocations()) { | |
| uint64_t address = Reloc.getOffset(); | |
| SmallString<32> relocname; | |
| SmallString<32> valuestr; | |
| Reloc.getTypeName(relocname); | |
| error(getRelocationValueString(Reloc, valuestr)); | |
| outs() << format(Fmt.data(), address) << " " << relocname << " " | |
| << valuestr << "\n"; | |
| } | |
| } | |
| } | |
| void llvm::PrintSectionHeaders(const ObjectFile *Obj) { | |
| outs() << "Sections:\n" | |
| "Idx Name Size Address Type\n"; | |
| for (const SectionRef &Section : ToolSectionFilter(*Obj)) { | |
| StringRef Name; | |
| error(Section.getName(Name)); | |
| uint64_t Address = Section.getAddress(); | |
| uint64_t Size = Section.getSize(); | |
| bool Text = Section.isText(); | |
| bool Data = Section.isData(); | |
| bool BSS = Section.isBSS(); | |
| std::string Type = (std::string(Text ? "TEXT " : "") + | |
| (Data ? "DATA " : "") + (BSS ? "BSS" : "")); | |
| outs() << format("%3d %-13s %08" PRIx64 " %016" PRIx64 " %s\n", | |
| (unsigned)Section.getIndex(), Name.str().c_str(), Size, | |
| Address, Type.c_str()); | |
| } | |
| } | |
| void llvm::PrintSectionContents(const ObjectFile *Obj) { | |
| std::error_code EC; | |
| for (const SectionRef &Section : ToolSectionFilter(*Obj)) { | |
| StringRef Name; | |
| StringRef Contents; | |
| error(Section.getName(Name)); | |
| uint64_t BaseAddr = Section.getAddress(); | |
| uint64_t Size = Section.getSize(); | |
| if (!Size) | |
| continue; | |
| outs() << "Contents of section " << Name << ":\n"; | |
| if (Section.isBSS()) { | |
| outs() << format("<skipping contents of bss section at [%04" PRIx64 | |
| ", %04" PRIx64 ")>\n", | |
| BaseAddr, BaseAddr + Size); | |
| continue; | |
| } | |
| error(Section.getContents(Contents)); | |
| // Dump out the content as hex and printable ascii characters. | |
| for (std::size_t addr = 0, end = Contents.size(); addr < end; addr += 16) { | |
| outs() << format(" %04" PRIx64 " ", BaseAddr + addr); | |
| // Dump line of hex. | |
| for (std::size_t i = 0; i < 16; ++i) { | |
| if (i != 0 && i % 4 == 0) | |
| outs() << ' '; | |
| if (addr + i < end) | |
| outs() << hexdigit((Contents[addr + i] >> 4) & 0xF, true) | |
| << hexdigit(Contents[addr + i] & 0xF, true); | |
| else | |
| outs() << " "; | |
| } | |
| // Print ascii. | |
| outs() << " "; | |
| for (std::size_t i = 0; i < 16 && addr + i < end; ++i) { | |
| if (isPrint(static_cast<unsigned char>(Contents[addr + i]) & 0xFF)) | |
| outs() << Contents[addr + i]; | |
| else | |
| outs() << "."; | |
| } | |
| outs() << "\n"; | |
| } | |
| } | |
| } | |
| void llvm::PrintSymbolTable(const ObjectFile *o, StringRef ArchiveName, | |
| StringRef ArchitectureName) { | |
| outs() << "SYMBOL TABLE:\n"; | |
| if (const COFFObjectFile *coff = dyn_cast<const COFFObjectFile>(o)) { | |
| printCOFFSymbolTable(coff); | |
| return; | |
| } | |
| for (const SymbolRef &Symbol : o->symbols()) { | |
| Expected<uint64_t> AddressOrError = Symbol.getAddress(); | |
| if (!AddressOrError) | |
| report_error(ArchiveName, o->getFileName(), AddressOrError.takeError(), | |
| ArchitectureName); | |
| uint64_t Address = *AddressOrError; | |
| if ((Address < StartAddress) || (Address > StopAddress)) | |
| continue; | |
| Expected<SymbolRef::Type> TypeOrError = Symbol.getType(); | |
| if (!TypeOrError) | |
| report_error(ArchiveName, o->getFileName(), TypeOrError.takeError(), | |
| ArchitectureName); | |
| SymbolRef::Type Type = *TypeOrError; | |
| uint32_t Flags = Symbol.getFlags(); | |
| Expected<section_iterator> SectionOrErr = Symbol.getSection(); | |
| if (!SectionOrErr) | |
| report_error(ArchiveName, o->getFileName(), SectionOrErr.takeError(), | |
| ArchitectureName); | |
| section_iterator Section = *SectionOrErr; | |
| StringRef Name; | |
| if (Type == SymbolRef::ST_Debug && Section != o->section_end()) { | |
| Section->getName(Name); | |
| } else { | |
| Expected<StringRef> NameOrErr = Symbol.getName(); | |
| if (!NameOrErr) | |
| report_error(ArchiveName, o->getFileName(), NameOrErr.takeError(), | |
| ArchitectureName); | |
| Name = *NameOrErr; | |
| } | |
| bool Global = Flags & SymbolRef::SF_Global; | |
| bool Weak = Flags & SymbolRef::SF_Weak; | |
| bool Absolute = Flags & SymbolRef::SF_Absolute; | |
| bool Common = Flags & SymbolRef::SF_Common; | |
| bool Hidden = Flags & SymbolRef::SF_Hidden; | |
| char GlobLoc = ' '; | |
| if (Type != SymbolRef::ST_Unknown) | |
| GlobLoc = Global ? 'g' : 'l'; | |
| char Debug = (Type == SymbolRef::ST_Debug || Type == SymbolRef::ST_File) | |
| ? 'd' : ' '; | |
| char FileFunc = ' '; | |
| if (Type == SymbolRef::ST_File) | |
| FileFunc = 'f'; | |
| else if (Type == SymbolRef::ST_Function) | |
| FileFunc = 'F'; | |
| const char *Fmt = o->getBytesInAddress() > 4 ? "%016" PRIx64 : | |
| "%08" PRIx64; | |
| outs() << format(Fmt, Address) << " " | |
| << GlobLoc // Local -> 'l', Global -> 'g', Neither -> ' ' | |
| << (Weak ? 'w' : ' ') // Weak? | |
| << ' ' // Constructor. Not supported yet. | |
| << ' ' // Warning. Not supported yet. | |
| << ' ' // Indirect reference to another symbol. | |
| << Debug // Debugging (d) or dynamic (D) symbol. | |
| << FileFunc // Name of function (F), file (f) or object (O). | |
| << ' '; | |
| if (Absolute) { | |
| outs() << "*ABS*"; | |
| } else if (Common) { | |
| outs() << "*COM*"; | |
| } else if (Section == o->section_end()) { | |
| outs() << "*UND*"; | |
| } else { | |
| if (const MachOObjectFile *MachO = | |
| dyn_cast<const MachOObjectFile>(o)) { | |
| DataRefImpl DR = Section->getRawDataRefImpl(); | |
| StringRef SegmentName = MachO->getSectionFinalSegmentName(DR); | |
| outs() << SegmentName << ","; | |
| } | |
| StringRef SectionName; | |
| error(Section->getName(SectionName)); | |
| outs() << SectionName; | |
| } | |
| outs() << '\t'; | |
| if (Common || isa<ELFObjectFileBase>(o)) { | |
| uint64_t Val = | |
| Common ? Symbol.getAlignment() : ELFSymbolRef(Symbol).getSize(); | |
| outs() << format("\t %08" PRIx64 " ", Val); | |
| } | |
| if (Hidden) { | |
| outs() << ".hidden "; | |
| } | |
| outs() << Name | |
| << '\n'; | |
| } | |
| } | |
| static void PrintUnwindInfo(const ObjectFile *o) { | |
| outs() << "Unwind info:\n\n"; | |
| if (const COFFObjectFile *coff = dyn_cast<COFFObjectFile>(o)) { | |
| printCOFFUnwindInfo(coff); | |
| } else if (const MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachOUnwindInfo(MachO); | |
| else { | |
| // TODO: Extract DWARF dump tool to objdump. | |
| errs() << "This operation is only currently supported " | |
| "for COFF and MachO object files.\n"; | |
| return; | |
| } | |
| } | |
| void llvm::printExportsTrie(const ObjectFile *o) { | |
| outs() << "Exports trie:\n"; | |
| if (const MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachOExportsTrie(MachO); | |
| else { | |
| errs() << "This operation is only currently supported " | |
| "for Mach-O executable files.\n"; | |
| return; | |
| } | |
| } | |
| void llvm::printRebaseTable(ObjectFile *o) { | |
| outs() << "Rebase table:\n"; | |
| if (MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachORebaseTable(MachO); | |
| else { | |
| errs() << "This operation is only currently supported " | |
| "for Mach-O executable files.\n"; | |
| return; | |
| } | |
| } | |
| void llvm::printBindTable(ObjectFile *o) { | |
| outs() << "Bind table:\n"; | |
| if (MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachOBindTable(MachO); | |
| else { | |
| errs() << "This operation is only currently supported " | |
| "for Mach-O executable files.\n"; | |
| return; | |
| } | |
| } | |
| void llvm::printLazyBindTable(ObjectFile *o) { | |
| outs() << "Lazy bind table:\n"; | |
| if (MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachOLazyBindTable(MachO); | |
| else { | |
| errs() << "This operation is only currently supported " | |
| "for Mach-O executable files.\n"; | |
| return; | |
| } | |
| } | |
| void llvm::printWeakBindTable(ObjectFile *o) { | |
| outs() << "Weak bind table:\n"; | |
| if (MachOObjectFile *MachO = dyn_cast<MachOObjectFile>(o)) | |
| printMachOWeakBindTable(MachO); | |
| else { | |
| errs() << "This operation is only currently supported " | |
| "for Mach-O executable files.\n"; | |
| return; | |
| } | |
| } | |
| /// Dump the raw contents of the __clangast section so the output can be piped | |
| /// into llvm-bcanalyzer. | |
| void llvm::printRawClangAST(const ObjectFile *Obj) { | |
| if (outs().is_displayed()) { | |
| errs() << "The -raw-clang-ast option will dump the raw binary contents of " | |
| "the clang ast section.\n" | |
| "Please redirect the output to a file or another program such as " | |
| "llvm-bcanalyzer.\n"; | |
| return; | |
| } | |
| StringRef ClangASTSectionName("__clangast"); | |
| if (isa<COFFObjectFile>(Obj)) { | |
| ClangASTSectionName = "clangast"; | |
| } | |
| Optional<object::SectionRef> ClangASTSection; | |
| for (auto Sec : ToolSectionFilter(*Obj)) { | |
| StringRef Name; | |
| Sec.getName(Name); | |
| if (Name == ClangASTSectionName) { | |
| ClangASTSection = Sec; | |
| break; | |
| } | |
| } | |
| if (!ClangASTSection) | |
| return; | |
| StringRef ClangASTContents; | |
| error(ClangASTSection.getValue().getContents(ClangASTContents)); | |
| outs().write(ClangASTContents.data(), ClangASTContents.size()); | |
| } | |
| static void printFaultMaps(const ObjectFile *Obj) { | |
| const char *FaultMapSectionName = nullptr; | |
| if (isa<ELFObjectFileBase>(Obj)) { | |
| FaultMapSectionName = ".llvm_faultmaps"; | |
| } else if (isa<MachOObjectFile>(Obj)) { | |
| FaultMapSectionName = "__llvm_faultmaps"; | |
| } else { | |
| errs() << "This operation is only currently supported " | |
| "for ELF and Mach-O executable files.\n"; | |
| return; | |
| } | |
| Optional<object::SectionRef> FaultMapSection; | |
| for (auto Sec : ToolSectionFilter(*Obj)) { | |
| StringRef Name; | |
| Sec.getName(Name); | |
| if (Name == FaultMapSectionName) { | |
| FaultMapSection = Sec; | |
| break; | |
| } | |
| } | |
| outs() << "FaultMap table:\n"; | |
| if (!FaultMapSection.hasValue()) { | |
| outs() << "<not found>\n"; | |
| return; | |
| } | |
| StringRef FaultMapContents; | |
| error(FaultMapSection.getValue().getContents(FaultMapContents)); | |
| FaultMapParser FMP(FaultMapContents.bytes_begin(), | |
| FaultMapContents.bytes_end()); | |
| outs() << FMP; | |
| } | |
| static void printPrivateFileHeaders(const ObjectFile *o, bool onlyFirst) { | |
| if (o->isELF()) { | |
| printELFFileHeader(o); | |
| return printELFDynamicSection(o); | |
| } | |
| if (o->isCOFF()) | |
| return printCOFFFileHeader(o); | |
| if (o->isWasm()) | |
| return printWasmFileHeader(o); | |
| if (o->isMachO()) { | |
| printMachOFileHeader(o); | |
| if (!onlyFirst) | |
| printMachOLoadCommands(o); | |
| return; | |
| } | |
| report_error(o->getFileName(), "Invalid/Unsupported object file format"); | |
| } | |
| static void printFileHeaders(const ObjectFile *o) { | |
| if (!o->isELF() && !o->isCOFF()) | |
| report_error(o->getFileName(), "Invalid/Unsupported object file format"); | |
| Triple::ArchType AT = o->getArch(); | |
| outs() << "architecture: " << Triple::getArchTypeName(AT) << "\n"; | |
| Expected<uint64_t> StartAddrOrErr = o->getStartAddress(); | |
| if (!StartAddrOrErr) | |
| report_error(o->getFileName(), StartAddrOrErr.takeError()); | |
| outs() << "start address: " | |
| << format("0x%0*x", o->getBytesInAddress(), StartAddrOrErr.get()) | |
| << "\n"; | |
| } | |
| static void printArchiveChild(StringRef Filename, const Archive::Child &C) { | |
| Expected<sys::fs::perms> ModeOrErr = C.getAccessMode(); | |
| if (!ModeOrErr) { | |
| errs() << "ill-formed archive entry.\n"; | |
| consumeError(ModeOrErr.takeError()); | |
| return; | |
| } | |
| sys::fs::perms Mode = ModeOrErr.get(); | |
| outs() << ((Mode & sys::fs::owner_read) ? "r" : "-"); | |
| outs() << ((Mode & sys::fs::owner_write) ? "w" : "-"); | |
| outs() << ((Mode & sys::fs::owner_exe) ? "x" : "-"); | |
| outs() << ((Mode & sys::fs::group_read) ? "r" : "-"); | |
| outs() << ((Mode & sys::fs::group_write) ? "w" : "-"); | |
| outs() << ((Mode & sys::fs::group_exe) ? "x" : "-"); | |
| outs() << ((Mode & sys::fs::others_read) ? "r" : "-"); | |
| outs() << ((Mode & sys::fs::others_write) ? "w" : "-"); | |
| outs() << ((Mode & sys::fs::others_exe) ? "x" : "-"); | |
| outs() << " "; | |
| Expected<unsigned> UIDOrErr = C.getUID(); | |
| if (!UIDOrErr) | |
| report_error(Filename, UIDOrErr.takeError()); | |
| unsigned UID = UIDOrErr.get(); | |
| outs() << format("%d/", UID); | |
| Expected<unsigned> GIDOrErr = C.getGID(); | |
| if (!GIDOrErr) | |
| report_error(Filename, GIDOrErr.takeError()); | |
| unsigned GID = GIDOrErr.get(); | |
| outs() << format("%-d ", GID); | |
| Expected<uint64_t> Size = C.getRawSize(); | |
| if (!Size) | |
| report_error(Filename, Size.takeError()); | |
| outs() << format("%6" PRId64, Size.get()) << " "; | |
| StringRef RawLastModified = C.getRawLastModified(); | |
| unsigned Seconds; | |
| if (RawLastModified.getAsInteger(10, Seconds)) | |
| outs() << "(date: \"" << RawLastModified | |
| << "\" contains non-decimal chars) "; | |
| else { | |
| // Since ctime(3) returns a 26 character string of the form: | |
| // "Sun Sep 16 01:03:52 1973\n\0" | |
| // just print 24 characters. | |
| time_t t = Seconds; | |
| outs() << format("%.24s ", ctime(&t)); | |
| } | |
| StringRef Name = ""; | |
| Expected<StringRef> NameOrErr = C.getName(); | |
| if (!NameOrErr) { | |
| consumeError(NameOrErr.takeError()); | |
| Expected<StringRef> RawNameOrErr = C.getRawName(); | |
| if (!RawNameOrErr) | |
| report_error(Filename, NameOrErr.takeError()); | |
| Name = RawNameOrErr.get(); | |
| } else { | |
| Name = NameOrErr.get(); | |
| } | |
| outs() << Name << "\n"; | |
| } | |
| static void DumpObject(ObjectFile *o, const Archive *a = nullptr, | |
| const Archive::Child *c = nullptr) { | |
| StringRef ArchiveName = a != nullptr ? a->getFileName() : ""; | |
| // Avoid other output when using a raw option. | |
| if (!RawClangAST) { | |
| outs() << '\n'; | |
| if (a) | |
| outs() << a->getFileName() << "(" << o->getFileName() << ")"; | |
| else | |
| outs() << o->getFileName(); | |
| outs() << ":\tfile format " << o->getFileFormatName() << "\n\n"; | |
| } | |
| if (ArchiveHeaders && !MachOOpt) | |
| printArchiveChild(a->getFileName(), *c); | |
| if (Disassemble) | |
| DisassembleObject(o, Relocations); | |
| if (Relocations && !Disassemble) | |
| PrintRelocations(o); | |
| if (DynamicRelocations) | |
| PrintDynamicRelocations(o); | |
| if (SectionHeaders) | |
| PrintSectionHeaders(o); | |
| if (SectionContents) | |
| PrintSectionContents(o); | |
| if (SymbolTable) | |
| PrintSymbolTable(o, ArchiveName); | |
| if (UnwindInfo) | |
| PrintUnwindInfo(o); | |
| if (PrivateHeaders || FirstPrivateHeader) | |
| printPrivateFileHeaders(o, FirstPrivateHeader); | |
| if (FileHeaders) | |
| printFileHeaders(o); | |
| if (ExportsTrie) | |
| printExportsTrie(o); | |
| if (Rebase) | |
| printRebaseTable(o); | |
| if (Bind) | |
| printBindTable(o); | |
| if (LazyBind) | |
| printLazyBindTable(o); | |
| if (WeakBind) | |
| printWeakBindTable(o); | |
| if (RawClangAST) | |
| printRawClangAST(o); | |
| if (PrintFaultMaps) | |
| printFaultMaps(o); | |
| if (DwarfDumpType != DIDT_Null) { | |
| std::unique_ptr<DIContext> DICtx = DWARFContext::create(*o); | |
| // Dump the complete DWARF structure. | |
| DIDumpOptions DumpOpts; | |
| DumpOpts.DumpType = DwarfDumpType; | |
| DICtx->dump(outs(), DumpOpts); | |
| } | |
| } | |
| static void DumpObject(const COFFImportFile *I, const Archive *A, | |
| const Archive::Child *C = nullptr) { | |
| StringRef ArchiveName = A ? A->getFileName() : ""; | |
| // Avoid other output when using a raw option. | |
| if (!RawClangAST) | |
| outs() << '\n' | |
| << ArchiveName << "(" << I->getFileName() << ")" | |
| << ":\tfile format COFF-import-file" | |
| << "\n\n"; | |
| if (ArchiveHeaders && !MachOOpt) | |
| printArchiveChild(A->getFileName(), *C); | |
| if (SymbolTable) | |
| printCOFFSymbolTable(I); | |
| } | |
| /// Dump each object file in \a a; | |
| static void DumpArchive(const Archive *a) { | |
| Error Err = Error::success(); | |
| for (auto &C : a->children(Err)) { | |
| Expected<std::unique_ptr<Binary>> ChildOrErr = C.getAsBinary(); | |
| if (!ChildOrErr) { | |
| if (auto E = isNotObjectErrorInvalidFileType(ChildOrErr.takeError())) | |
| report_error(a->getFileName(), C, std::move(E)); | |
| continue; | |
| } | |
| if (ObjectFile *o = dyn_cast<ObjectFile>(&*ChildOrErr.get())) | |
| DumpObject(o, a, &C); | |
| else if (COFFImportFile *I = dyn_cast<COFFImportFile>(&*ChildOrErr.get())) | |
| DumpObject(I, a, &C); | |
| else | |
| report_error(a->getFileName(), object_error::invalid_file_type); | |
| } | |
| if (Err) | |
| report_error(a->getFileName(), std::move(Err)); | |
| } | |
| /// Open file and figure out how to dump it. | |
| static void DumpInput(StringRef file) { | |
| // If we are using the Mach-O specific object file parser, then let it parse | |
| // the file and process the command line options. So the -arch flags can | |
| // be used to select specific slices, etc. | |
| if (MachOOpt) { | |
| ParseInputMachO(file); | |
| return; | |
| } | |
| // Attempt to open the binary. | |
| Expected<OwningBinary<Binary>> BinaryOrErr = createBinary(file); | |
| if (!BinaryOrErr) | |
| report_error(file, BinaryOrErr.takeError()); | |
| Binary &Binary = *BinaryOrErr.get().getBinary(); | |
| if (Archive *a = dyn_cast<Archive>(&Binary)) | |
| DumpArchive(a); | |
| else if (ObjectFile *o = dyn_cast<ObjectFile>(&Binary)) | |
| DumpObject(o); | |
| else | |
| report_error(file, object_error::invalid_file_type); | |
| } | |
| int main(int argc, char **argv) { | |
| InitLLVM X(argc, argv); | |
| // Initialize targets and assembly printers/parsers. | |
| llvm::InitializeAllTargetInfos(); | |
| llvm::InitializeAllTargetMCs(); | |
| llvm::InitializeAllDisassemblers(); | |
| // Register the target printer for --version. | |
| cl::AddExtraVersionPrinter(TargetRegistry::printRegisteredTargetsForVersion); | |
| cl::ParseCommandLineOptions(argc, argv, "llvm object file dumper\n"); | |
| TripleName = Triple::normalize(TripleName); | |
| ToolName = argv[0]; | |
| // Defaults to a.out if no filenames specified. | |
| if (InputFilenames.size() == 0) | |
| InputFilenames.push_back("a.out"); | |
| if (AllHeaders) | |
| PrivateHeaders = Relocations = SectionHeaders = SymbolTable = true; | |
| if (DisassembleAll || PrintSource || PrintLines) | |
| Disassemble = true; | |
| if (Demangle.getValue() != "none" && Demangle.getValue() != "" && | |
| Demangle.getValue() != "itanium") | |
| warn("Unsupported demangling style"); | |
| if (!Disassemble | |
| && !Relocations | |
| && !DynamicRelocations | |
| && !SectionHeaders | |
| && !SectionContents | |
| && !SymbolTable | |
| && !UnwindInfo | |
| && !PrivateHeaders | |
| && !FileHeaders | |
| && !FirstPrivateHeader | |
| && !ExportsTrie | |
| && !Rebase | |
| && !Bind | |
| && !LazyBind | |
| && !WeakBind | |
| && !RawClangAST | |
| && !(UniversalHeaders && MachOOpt) | |
| && !ArchiveHeaders | |
| && !(IndirectSymbols && MachOOpt) | |
| && !(DataInCode && MachOOpt) | |
| && !(LinkOptHints && MachOOpt) | |
| && !(InfoPlist && MachOOpt) | |
| && !(DylibsUsed && MachOOpt) | |
| && !(DylibId && MachOOpt) | |
| && !(ObjcMetaData && MachOOpt) | |
| && !(FilterSections.size() != 0 && MachOOpt) | |
| && !PrintFaultMaps | |
| && DwarfDumpType == DIDT_Null) { | |
| cl::PrintHelpMessage(); | |
| return 2; | |
| } | |
| DisasmFuncsSet.insert(DisassembleFunctions.begin(), | |
| DisassembleFunctions.end()); | |
| llvm::for_each(InputFilenames, DumpInput); | |
| return EXIT_SUCCESS; | |
| } |