| ; Test signed high-part i64->i128 multiplications on z14. | |
| ; | |
| ; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z14 -asm-verbose=0 | FileCheck %s | |
| declare i64 @foo() | |
| ; Check sign-extended multiplication in which only the high part is used. | |
| define i64 @f1(i64 %dummy, i64 %a, i64 %b) { | |
| ; CHECK-LABEL: f1: | |
| ; CHECK-NOT: {{%r[234]}} | |
| ; CHECK: mgrk %r2, %r3, %r4 | |
| ; CHECK: br %r14 | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check sign-extended multiplication in which only part of the high half | |
| ; is used. | |
| define i64 @f2(i64 %dummy, i64 %a, i64 %b) { | |
| ; CHECK-LABEL: f2: | |
| ; CHECK-NOT: {{%r[234]}} | |
| ; CHECK: mgrk [[REG:%r[0-9]+]], %r3, %r4 | |
| ; CHECK: srlg %r2, [[REG]], 3 | |
| ; CHECK: br %r14 | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 67 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check sign-extended multiplication in which the result is split into | |
| ; high and low halves. | |
| define i64 @f3(i64 %dummy, i64 %a, i64 %b) { | |
| ; CHECK-LABEL: f3: | |
| ; CHECK-NOT: {{%r[234]}} | |
| ; CHECK: mgrk %r2, %r3, %r4 | |
| ; CHECK: ogr %r2, %r3 | |
| ; CHECK: br %r14 | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| %low = trunc i128 %mulx to i64 | |
| %or = or i64 %high, %low | |
| ret i64 %or | |
| } | |
| ; Check MG with no displacement. | |
| define i64 @f4(i64 %dummy, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f4: | |
| ; CHECK-NOT: {{%r[234]}} | |
| ; CHECK: mg %r2, 0(%r4) | |
| ; CHECK: br %r14 | |
| %b = load i64, i64 *%src | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check the high end of the aligned MG range. | |
| define i64 @f5(i64 %dummy, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f5: | |
| ; CHECK: mg %r2, 524280(%r4) | |
| ; CHECK: br %r14 | |
| %ptr = getelementptr i64, i64 *%src, i64 65535 | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check the next doubleword up, which requires separate address logic. | |
| ; Other sequences besides this one would be OK. | |
| define i64 @f6(i64 %dummy, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f6: | |
| ; CHECK: agfi %r4, 524288 | |
| ; CHECK: mg %r2, 0(%r4) | |
| ; CHECK: br %r14 | |
| %ptr = getelementptr i64, i64 *%src, i64 65536 | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check the high end of the negative aligned MG range. | |
| define i64 @f7(i64 %dummy, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f7: | |
| ; CHECK: mg %r2, -8(%r4) | |
| ; CHECK: br %r14 | |
| %ptr = getelementptr i64, i64 *%src, i64 -1 | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check the low end of the MG range. | |
| define i64 @f8(i64 %dummy, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f8: | |
| ; CHECK: mg %r2, -524288(%r4) | |
| ; CHECK: br %r14 | |
| %ptr = getelementptr i64, i64 *%src, i64 -65536 | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check the next doubleword down, which needs separate address logic. | |
| ; Other sequences besides this one would be OK. | |
| define i64 @f9(i64 *%dest, i64 %a, i64 *%src) { | |
| ; CHECK-LABEL: f9: | |
| ; CHECK: agfi %r4, -524296 | |
| ; CHECK: mg %r2, 0(%r4) | |
| ; CHECK: br %r14 | |
| %ptr = getelementptr i64, i64 *%src, i64 -65537 | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |
| ; Check that MG allows an index. | |
| define i64 @f10(i64 *%dest, i64 %a, i64 %src, i64 %index) { | |
| ; CHECK-LABEL: f10: | |
| ; CHECK: mg %r2, 524287(%r5,%r4) | |
| ; CHECK: br %r14 | |
| %add1 = add i64 %src, %index | |
| %add2 = add i64 %add1, 524287 | |
| %ptr = inttoptr i64 %add2 to i64 * | |
| %b = load i64, i64 *%ptr | |
| %ax = sext i64 %a to i128 | |
| %bx = sext i64 %b to i128 | |
| %mulx = mul i128 %ax, %bx | |
| %highx = lshr i128 %mulx, 64 | |
| %high = trunc i128 %highx to i64 | |
| ret i64 %high | |
| } | |