| ; Test 128-bit addition when the distinct-operands facility is available. | |
| ; | |
| ; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z196 | FileCheck %s | |
| ; Test the case where both operands are in registers. | |
| define i64 @f1(i64 %a, i64 %b, i64 %c, i64 %d, i64 *%ptr) { | |
| ; CHECK-LABEL: f1: | |
| ; CHECK: algrk %r2, %r4, %r5 | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %b, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %c, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %y2 = insertelement <2 x i64> %x1, i64 %d, i32 1 | |
| %y = bitcast <2 x i64> %y2 to i128 | |
| %add = add i128 %x, %y | |
| %addv = bitcast i128 %add to <2 x i64> | |
| %high = extractelement <2 x i64> %addv, i32 0 | |
| store i64 %high, i64 *%ptr | |
| %low = extractelement <2 x i64> %addv, i32 1 | |
| ret i64 %low | |
| } | |
| ; Test addition of 1. | |
| define void @f2(i64 %a, i64 %b, i128 *%ptr) { | |
| ; CHECK-LABEL: f2: | |
| ; CHECK: alghsik {{%r[0-5]}}, %r3, 1 | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %a, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %b, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %add = add i128 %x, 1 | |
| store i128 %add, i128 *%ptr | |
| ret void | |
| } | |
| ; Test the upper end of the ALGHSIK range. | |
| define void @f3(i64 %a, i64 %b, i128 *%ptr) { | |
| ; CHECK-LABEL: f3: | |
| ; CHECK: alghsik {{%r[0-5]}}, %r3, 32767 | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %a, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %b, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %add = add i128 %x, 32767 | |
| store i128 %add, i128 *%ptr | |
| ret void | |
| } | |
| ; Test the next value up, which should use ALGFI instead. | |
| define void @f4(i64 %a, i64 %b, i128 *%ptr) { | |
| ; CHECK-LABEL: f4: | |
| ; CHECK: algfi %r3, 32768 | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %a, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %b, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %add = add i128 %x, 32768 | |
| store i128 %add, i128 *%ptr | |
| ret void | |
| } | |
| ; Test the lower end of the ALGHSIK range. | |
| define void @f5(i64 %a, i64 %b, i128 *%ptr) { | |
| ; CHECK-LABEL: f5: | |
| ; CHECK: alghsik {{%r[0-5]}}, %r3, -32768 | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %a, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %b, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %add = add i128 %x, -32768 | |
| store i128 %add, i128 *%ptr | |
| ret void | |
| } | |
| ; Test the next value down, which cannot use either ALGHSIK or ALGFI. | |
| define void @f6(i64 %a, i64 %b, i128 *%ptr) { | |
| ; CHECK-LABEL: f6: | |
| ; CHECK-NOT: alghsik | |
| ; CHECK-NOT: algfi | |
| ; CHECK: alcgr | |
| ; CHECK: br %r14 | |
| %x1 = insertelement <2 x i64> undef, i64 %a, i32 0 | |
| %x2 = insertelement <2 x i64> %x1, i64 %b, i32 1 | |
| %x = bitcast <2 x i64> %x2 to i128 | |
| %add = add i128 %x, -32769 | |
| store i128 %add, i128 *%ptr | |
| ret void | |
| } |