| ; RUN: llc < %s -mtriple=arm-apple-darwin | FileCheck %s | |
| ; RUN: llc < %s -mtriple=arm-apple-darwin | FileCheck %s --check-prefix=V7 | |
| ; RUN: llc < %s -mtriple=armv8-none-linux-gnueabi | FileCheck %s -check-prefix=V8 | |
| define i32 @f(i32 %a, i32 %b) nounwind ssp { | |
| entry: | |
| ; CHECK-LABEL: f: | |
| ; CHECK: subs | |
| ; CHECK-NOT: cmp | |
| %cmp = icmp sgt i32 %a, %b | |
| %sub = sub nsw i32 %a, %b | |
| %sub. = select i1 %cmp, i32 %sub, i32 0 | |
| ret i32 %sub. | |
| } | |
| define i32 @g(i32 %a, i32 %b) nounwind ssp { | |
| entry: | |
| ; CHECK-LABEL: g: | |
| ; CHECK: subs | |
| ; CHECK-NOT: cmp | |
| %cmp = icmp slt i32 %a, %b | |
| %sub = sub nsw i32 %b, %a | |
| %sub. = select i1 %cmp, i32 %sub, i32 0 | |
| ret i32 %sub. | |
| } | |
| define i32 @h(i32 %a, i32 %b) nounwind ssp { | |
| entry: | |
| ; CHECK-LABEL: h: | |
| ; CHECK: subs | |
| ; CHECK-NOT: cmp | |
| %cmp = icmp sgt i32 %a, 3 | |
| %sub = sub nsw i32 %a, 3 | |
| %sub. = select i1 %cmp, i32 %sub, i32 %b | |
| ret i32 %sub. | |
| } | |
| ; rdar://11725965 | |
| define i32 @i(i32 %a, i32 %b) nounwind readnone ssp { | |
| entry: | |
| ; CHECK-LABEL: i: | |
| ; CHECK: subs | |
| ; CHECK-NOT: cmp | |
| %cmp = icmp ult i32 %a, %b | |
| %sub = sub i32 %b, %a | |
| %sub. = select i1 %cmp, i32 %sub, i32 0 | |
| ret i32 %sub. | |
| } | |
| ; If CPSR is live-out, we can't remove cmp if there exists | |
| ; a swapped sub. | |
| define i32 @j(i32 %a, i32 %b) nounwind { | |
| entry: | |
| ; CHECK-LABEL: j: | |
| ; CHECK: sub | |
| ; CHECK: cmp | |
| %cmp = icmp eq i32 %b, %a | |
| %sub = sub nsw i32 %a, %b | |
| br i1 %cmp, label %if.then, label %if.else | |
| if.then: | |
| %cmp2 = icmp sgt i32 %b, %a | |
| %sel = select i1 %cmp2, i32 %sub, i32 %a | |
| ret i32 %sel | |
| if.else: | |
| ret i32 %sub | |
| } | |
| ; If the sub/rsb instruction is predicated, we can't use the flags. | |
| ; <rdar://problem/12263428> | |
| ; Test case from MultiSource/Benchmarks/Ptrdist/bc/number.s | |
| ; CHECK: bc_raise | |
| ; CHECK: rsbeq | |
| ; CHECK: cmp | |
| define i32 @bc_raise(i1 %cond) nounwind ssp { | |
| entry: | |
| %val.2.i = select i1 %cond, i32 0, i32 undef | |
| %sub.i = sub nsw i32 0, %val.2.i | |
| %retval.0.i = select i1 %cond, i32 %val.2.i, i32 %sub.i | |
| %cmp1 = icmp eq i32 %retval.0.i, 0 | |
| br i1 %cmp1, label %land.lhs.true, label %if.end11 | |
| land.lhs.true: ; preds = %num2long.exit | |
| ret i32 17 | |
| if.end11: ; preds = %num2long.exit | |
| ret i32 23 | |
| } | |
| ; When considering the producer of cmp's src as the subsuming instruction, | |
| ; only consider that when the comparison is to 0. | |
| define i32 @cmp_src_nonzero(i32 %a, i32 %b, i32 %x, i32 %y) { | |
| entry: | |
| ; CHECK-LABEL: cmp_src_nonzero: | |
| ; CHECK: sub | |
| ; CHECK: cmp | |
| %sub = sub i32 %a, %b | |
| %cmp = icmp eq i32 %sub, 17 | |
| %ret = select i1 %cmp, i32 %x, i32 %y | |
| ret i32 %ret | |
| } | |
| define float @float_sel(i32 %a, i32 %b, float %x, float %y) { | |
| entry: | |
| ; CHECK-LABEL: float_sel: | |
| ; CHECK-NOT: cmp | |
| ; V8-LABEL: float_sel: | |
| ; V8-NOT: cmp | |
| ; V8: vseleq.f32 | |
| %sub = sub i32 %a, %b | |
| %cmp = icmp eq i32 %sub, 0 | |
| %ret = select i1 %cmp, float %x, float %y | |
| ret float %ret | |
| } | |
| define double @double_sel(i32 %a, i32 %b, double %x, double %y) { | |
| entry: | |
| ; CHECK-LABEL: double_sel: | |
| ; CHECK-NOT: cmp | |
| ; V8-LABEL: double_sel: | |
| ; V8-NOT: cmp | |
| ; V8: vseleq.f64 | |
| %sub = sub i32 %a, %b | |
| %cmp = icmp eq i32 %sub, 0 | |
| %ret = select i1 %cmp, double %x, double %y | |
| ret double %ret | |
| } | |
| @t = common global i32 0 | |
| define double @double_sub(i32 %a, i32 %b, double %x, double %y) { | |
| entry: | |
| ; CHECK-LABEL: double_sub: | |
| ; CHECK: subs | |
| ; CHECK-NOT: cmp | |
| ; V8-LABEL: double_sub: | |
| ; V8: vsel | |
| %cmp = icmp sgt i32 %a, %b | |
| %sub = sub i32 %a, %b | |
| store i32 %sub, i32* @t | |
| %ret = select i1 %cmp, double %x, double %y | |
| ret double %ret | |
| } | |
| define double @double_sub_swap(i32 %a, i32 %b, double %x, double %y) { | |
| entry: | |
| ; V7-LABEL: double_sub_swap: | |
| ; V7-NOT: cmp | |
| ; V7: subs | |
| ; V8-LABEL: double_sub_swap: | |
| ; V8-NOT: subs | |
| ; V8: cmp | |
| ; V8: vsel | |
| %cmp = icmp sgt i32 %a, %b | |
| %sub = sub i32 %b, %a | |
| %ret = select i1 %cmp, double %x, double %y | |
| store i32 %sub, i32* @t | |
| ret double %ret | |
| } | |
| declare void @abort() | |
| declare void @exit(i32) | |
| ; If the comparison uses the V bit (signed overflow/underflow), we can't | |
| ; omit the comparison. | |
| define i32 @cmp_slt0(i32 %a, i32 %b, i32 %x, i32 %y) { | |
| entry: | |
| ; CHECK-LABEL: cmp_slt0 | |
| ; CHECK: sub | |
| ; CHECK: cmn | |
| ; CHECK: bgt | |
| %load = load i32, i32* @t, align 4 | |
| %sub = sub i32 %load, 17 | |
| %cmp = icmp slt i32 %sub, 0 | |
| br i1 %cmp, label %if.then, label %if.else | |
| if.then: | |
| call void @abort() | |
| unreachable | |
| if.else: | |
| call void @exit(i32 0) | |
| unreachable | |
| } | |
| ; Same for the C bit. (Note the ult X, 0 is trivially | |
| ; false, so the DAG combiner may or may not optimize it). | |
| define i32 @cmp_ult0(i32 %a, i32 %b, i32 %x, i32 %y) { | |
| entry: | |
| ; CHECK-LABEL: cmp_ult0 | |
| ; CHECK: sub | |
| ; CHECK: cmp | |
| ; CHECK: bhs | |
| %load = load i32, i32* @t, align 4 | |
| %sub = sub i32 %load, 17 | |
| %cmp = icmp ult i32 %sub, 0 | |
| br i1 %cmp, label %if.then, label %if.else | |
| if.then: | |
| call void @abort() | |
| unreachable | |
| if.else: | |
| call void @exit(i32 0) | |
| unreachable | |
| } |