| ; RUN: llc -march=amdgcn -verify-machineinstrs < %s | FileCheck -check-prefix=SI %s | |
| ; | |
| ; | |
| ; Most SALU instructions ignore control flow, so we need to make sure | |
| ; they don't overwrite values from other blocks. | |
| ; If the branch decision is made based on a value in an SGPR then all | |
| ; threads will execute the same code paths, so we don't need to worry | |
| ; about instructions in different blocks overwriting each other. | |
| ; SI-LABEL: {{^}}sgpr_if_else_salu_br: | |
| ; SI: s_add | |
| ; SI: s_branch | |
| ; SI: s_sub | |
| define amdgpu_kernel void @sgpr_if_else_salu_br(i32 addrspace(1)* %out, i32 %a, i32 %b, i32 %c, i32 %d, i32 %e) { | |
| entry: | |
| %0 = icmp eq i32 %a, 0 | |
| br i1 %0, label %if, label %else | |
| if: | |
| %1 = sub i32 %b, %c | |
| br label %endif | |
| else: | |
| %2 = add i32 %d, %e | |
| br label %endif | |
| endif: | |
| %3 = phi i32 [%1, %if], [%2, %else] | |
| %4 = add i32 %3, %a | |
| store i32 %4, i32 addrspace(1)* %out | |
| ret void | |
| } | |
| ; SI-LABEL: {{^}}sgpr_if_else_salu_br_opt: | |
| ; SI: s_cmp_lg_u32 | |
| ; SI: s_cbranch_scc0 [[IF:BB[0-9]+_[0-9]+]] | |
| ; SI: ; %bb.1: ; %else | |
| ; SI: s_load_dword [[LOAD0:s[0-9]+]], s{{\[[0-9]+:[0-9]+\]}}, 0x2e | |
| ; SI: s_load_dword [[LOAD1:s[0-9]+]], s{{\[[0-9]+:[0-9]+\]}}, 0x37 | |
| ; SI-NOT: add | |
| ; SI: s_branch [[ENDIF:BB[0-9]+_[0-9]+]] | |
| ; SI: [[IF]]: ; %if | |
| ; SI: s_load_dword [[LOAD0]], s{{\[[0-9]+:[0-9]+\]}}, 0x1c | |
| ; SI: s_load_dword [[LOAD1]], s{{\[[0-9]+:[0-9]+\]}}, 0x25 | |
| ; SI-NOT: add | |
| ; SI: [[ENDIF]]: ; %endif | |
| ; SI: s_add_i32 s{{[0-9]+}}, [[LOAD0]], [[LOAD1]] | |
| ; SI: buffer_store_dword | |
| ; SI-NEXT: s_endpgm | |
| define amdgpu_kernel void @sgpr_if_else_salu_br_opt(i32 addrspace(1)* %out, [8 x i32], i32 %a, [8 x i32], i32 %b, [8 x i32], i32 %c, [8 x i32], i32 %d, [8 x i32], i32 %e) { | |
| entry: | |
| %cmp0 = icmp eq i32 %a, 0 | |
| br i1 %cmp0, label %if, label %else | |
| if: | |
| %add0 = add i32 %b, %c | |
| br label %endif | |
| else: | |
| %add1 = add i32 %d, %e | |
| br label %endif | |
| endif: | |
| %phi = phi i32 [%add0, %if], [%add1, %else] | |
| %add2 = add i32 %phi, %a | |
| store i32 %add2, i32 addrspace(1)* %out | |
| ret void | |
| } | |
| ; The two S_ADD instructions should write to different registers, since | |
| ; different threads will take different control flow paths. | |
| ; SI-LABEL: {{^}}sgpr_if_else_valu_br: | |
| ; SI: s_add_i32 [[SGPR:s[0-9]+]] | |
| ; SI-NOT: s_add_i32 [[SGPR]] | |
| define amdgpu_kernel void @sgpr_if_else_valu_br(i32 addrspace(1)* %out, float %a, i32 %b, i32 %c, i32 %d, i32 %e) { | |
| entry: | |
| %tid = call i32 @llvm.amdgcn.workitem.id.x() #0 | |
| %tid_f = uitofp i32 %tid to float | |
| %tmp1 = fcmp ueq float %tid_f, 0.0 | |
| br i1 %tmp1, label %if, label %else | |
| if: | |
| %tmp2 = add i32 %b, %c | |
| br label %endif | |
| else: | |
| %tmp3 = add i32 %d, %e | |
| br label %endif | |
| endif: | |
| %tmp4 = phi i32 [%tmp2, %if], [%tmp3, %else] | |
| store i32 %tmp4, i32 addrspace(1)* %out | |
| ret void | |
| } | |
| ; FIXME: Should write to different SGPR pairs instead of copying to | |
| ; VALU for i1 phi. | |
| ; SI-LABEL: {{^}}sgpr_if_else_valu_cmp_phi_br: | |
| ; SI: buffer_load_dword [[AVAL:v[0-9]+]] | |
| ; SI: v_cmp_gt_i32_e32 [[CMP_IF:vcc]], 0, [[AVAL]] | |
| ; SI: v_cndmask_b32_e64 [[V_CMP:v[0-9]+]], 0, -1, [[CMP_IF]] | |
| ; SI: BB{{[0-9]+}}_2: | |
| ; SI: buffer_load_dword [[AVAL:v[0-9]+]] | |
| ; SI: v_cmp_eq_u32_e32 [[CMP_ELSE:vcc]], 0, [[AVAL]] | |
| ; SI: v_cndmask_b32_e64 [[V_CMP]], 0, -1, [[CMP_ELSE]] | |
| ; SI: v_cmp_ne_u32_e32 [[CMP_CMP:vcc]], 0, [[V_CMP]] | |
| ; SI: v_cndmask_b32_e64 [[RESULT:v[0-9]+]], 0, -1, [[CMP_CMP]] | |
| ; SI: buffer_store_dword [[RESULT]] | |
| define amdgpu_kernel void @sgpr_if_else_valu_cmp_phi_br(i32 addrspace(1)* %out, i32 addrspace(1)* %a, i32 addrspace(1)* %b) { | |
| entry: | |
| %tid = call i32 @llvm.amdgcn.workitem.id.x() #0 | |
| %tmp1 = icmp eq i32 %tid, 0 | |
| br i1 %tmp1, label %if, label %else | |
| if: | |
| %gep.if = getelementptr i32, i32 addrspace(1)* %a, i32 %tid | |
| %a.val = load i32, i32 addrspace(1)* %gep.if | |
| %cmp.if = icmp eq i32 %a.val, 0 | |
| br label %endif | |
| else: | |
| %gep.else = getelementptr i32, i32 addrspace(1)* %b, i32 %tid | |
| %b.val = load i32, i32 addrspace(1)* %gep.else | |
| %cmp.else = icmp slt i32 %b.val, 0 | |
| br label %endif | |
| endif: | |
| %tmp4 = phi i1 [%cmp.if, %if], [%cmp.else, %else] | |
| %ext = sext i1 %tmp4 to i32 | |
| store i32 %ext, i32 addrspace(1)* %out | |
| ret void | |
| } | |
| declare i32 @llvm.amdgcn.workitem.id.x() #0 | |
| attributes #0 = { readnone } |